Beruflich Dokumente
Kultur Dokumente
class Eul
ManagedElement
+-RncFunction
+-UtranCell
+-Hsdsch
+-Eul
+-EulFach [0..1]
+-MultiCarrier [1..1]
Models the manageable characteristics of the logical resources representing E-DCH
channels, and their associated physical channels E-AGCH and E-RGCH/E-HICH.
Alarm: NBAP Message Failure (primary)
Event Type Communications Alarm
Probable Cause Call Establishment Error
Perceived Severity Major
Specific Problem Eul_NbapMessageFailure
Additional Text A Radio NW Service Impact
Additional Info: nbapCause, string
Alarm: Code Allocation Failure (primary)
Event Type Communications Alarm
Probable Cause Configuration or customizing error
Perceived Severity Major
Specific Problem Eul_CodeAllocationFailure
Additional Text A Radio NW Service Impact
Additional Info:
Possible parents:
Hsdsch;
Possible children:
EulFach [0..1]; MultiCarrier [1..1];
Attributes
SupportedAdminStates
administrativeState = LOCKE
The administrative state
Disturbances: Changing t
traffic. When set to LOCK
in the cell and the Eul ser
set to UNLOCKED, the ce
and all traffic released in
Cell/Hsdsch and Eul activ
Side effects: When this a
UNLOCKED, the counter p
incremented by a few sec
enabled.
long
nonPersistent
readOnly
availabilityStatus { 0..4
The availability status of
More than one of the follo
same object.
Bit 0 = 1: INTEST
Bit 1 = 1: FAILED
Bit 2 = 1: POWEROFF
Bit 3 = 1: OFFLINE
Bit 4 = 1: OFFDUTY
Bit 5 = 1: DEPENDENCY
set to 1)
Bit 6 = 1: DEGRADED
Bit 7 = 1: NOTINSTALLED
Bit 8 = 1: LOGFULL
Bit 9 = 1: DEPENDENCYL
Bit 10 = 1: DEPENDENCY
Bit 11 = 1: DEPENDENCY
OnOffVals
nonPersistent
readOnly
edchTti2Support
Indicates whether 2 ms T
BooleanVals
eulDchBalancingEnable
Enables/disables DCH/EU
eulDchBalancingLoad
EUL throughput threshold
actions start. When the E
threshold, EUL congestion
downswitching Release 9
upswitch requests in the
Dependencies: eulDchBa
eulDchBalancingLoad
Takes effect: Immediatel
long
eulDchBalancingOv
Threshold at or below wh
will start blocking EUL an
Special values: 0 indicate
Dependencies: eulDchBa
eulDchBalancingLoad
Takes effect: Immediatel
eulDchBalancing
Report periodicity for EUL
measurements.
long
Unit: 10 ms
Resolution: 10
eulDchBalanci
Indicates whether UL effi
supported in the cell or n
NBAP messages Resource
OnOffVals
eulDchBalan
Enables or disables loadthere are no EUL users in
to load-balancing is only
If set to OFF, downswitch
situation remains, regard
eulDchBal
}
Interval between periodic
targeting the non-guaran
cell.
long
Unit: 1 ms
Takes effect: Immediatel
string
mandatory
noNotification
restricted
OnOffVals
EulId
Naming attribute. Contain
eulLo
Enables or disables trigge
in high EUL congested sta
If set to ON and the cell i
congestion to release the
If set to OFF, Rab establi
allowed, retry to establish
eul
499
Maximum allowed Receiv
the RBS scheduler for EU
long
e
Indicates whether EUL TD
not, as reported by the R
Status Indication or Audi
Dependencies: Changing
traffic.
When the number of code
from the cell.
When the number is decr
long
Dependencies: Changing
traffic.
When the number of code
from the cell.
When the number is decr
SupportedOperStates
nonPersistent
readOnly
long
Unit: 1 dB
Takes effect: Immediatel
long
Special values:
0 indicates that no ASE is
downswitch action due to
Unit: 1 ASE
Takes effect: Immediatel
long
pmEulDowntimeAuto
Time that the EUL service in the cell has
been unavailable because the system has
considered the cell as down. In other
words, the UtranCell or one of its child
instances needed for EUL service (Eul,
Hsdsch, Rach, Fach, Pch) has been
disabled (operationalState=DISABLED)
while all these MOs have been unlocked
(administrativeState=UNLOCKED).
Unit: 1 s
Condition: Incremented by one each
second, starting when the UtranCell or
one of its children of type Eul, Hsdsch,
pmEulDowntimeMan
Time that the EUL service in the cell has
been unavailable because it has been
manually locked. In other words,
administrativeState has been set to
LOCKED in the UtranCell or in one of its
child instances needed for EUL service
(Eul, Hsdsch, Rach, Fach, Pch).
Unit: 1 s
Condition: Incremented by one each
second, starting when the UtranCell or
one of its children of type Eul, Hsdsch,
Rach, Fach, or Pch is locked
(administrativeState set to LOCKED), and
ending when all are unlocked
(administrativeState set to UNLOCKED).
This counter is stepped regardless of the
value of operationalState in the cell and
its child MOs.
Counter type: PEG
Scanner: Primary (initial state = Active)
Counter is reset after measurement
period: Yes
Counter context: CRNC
long[26] nonUnique
interfaceOnly
noNotification
nonPersistent
readOnly
pmEulRlcUserPacketThp
Number of times that the EUL user RLC
throughput has been within a defined
range during the ROP.
The user RLC throughput includes user
data but excludes retransmissions.
The individual counter elements are
stepped based on the following ranges:
[0]: 0 <= x < 25 kbps
[1]: 25 <= x < 50 kbps
[2]: 50 <= x < 100 kbps
[3]: 100 <= x < 200 kbps
...
[13]: 1100 <= x < 1200 kbps
[14]: 1200 <= x < 1400 kbps
...
[17]:
[18]:
[19]:
...
[23]:
[24]:
[25]:
long
interfaceOnly
noNotification
nonPersistent
readOnly
pmNoFailedRabEstAttEulRateCong
Number of rejected admission requests
due to EUL congestion.
Condition: Incremented by one when an
admission request for EUL or DCH is
denied due to too low headroom in the
cell.
Counter type: PEG
Scanner: Not included in any predefined
scanner
Counter is reset after measurement
period: Yes
Counter context: SRNC
pmSamplesEulRlcTotPacketThp
Number of samples recorded within the
ROP for pmSumEulRlcTotPacketThp.
Unit: 1 sample
Condition: Incremented by one when the
corresponding sum counter is
incremented.
Counter type: TrigSCAN
Scanner: Primary (initial state = Active)
Counter is reset after measurement
period: Yes
Counter context: SRNC
long
interfaceOnly
noNotification
nonPersistent
readOnly
pmSamplesEulRlcUserPacketThp
Number of samples recorded within the
ROP for pmSumEulRlcUserPacketThp.
Unit: 1 sample
Condition: Incremented by one when the
corresponding sum counter is
incremented.
Counter type: TrigSCAN
Scanner: Primary (initial state = Active)
Counter is reset after measurement
period: Yes
Counter context: SRNC
long
interfaceOnly
noNotification
nonPersistent
readOnly
pmSumEulRlcTotPacketThp
Sum of all sample values recorded during
a ROP for EUL RLC throughput.
Incremented in the best cell in the active
set.
Total RLC throughput includes both user
data and retransmissions.
Unit: 1 kbps (1000 bits per second)
Condition: Values are read periodically
from an internal level counter and added
to this counter.
The level counter maintains the current
EUL RLC throughput, including
retransmissions.
Counter type: TrigACC
Sampling rate: 0.1 s
Scanner: Primary (initial state = Active)
Counter is reset after measurement
period: Yes
Counter context: SRNC
long
interfaceOnly
noNotification
nonPersistent
readOnly
pmSumEulRlcUserPacketThp
Sum of all sample values recorded during
a ROP for EUL user RLC throughput
measurements.
Incremented in the best cell in the active
set.
The user RLC throughput includes user
data but excludes retransmissions.
Unit: 1 kbps (1000 bits per second)
Condition: Values are read periodically
from an internal level counter and added
to this counter.
The level counter maintains the current
pmTotalTimeEulDchBalancing
Total time that the cell has been EUL ratecongested during a ROP. The cell is
considered rate-congested when the EUL
throughput is below eulDchBalancingLoad.
Unit: 1 s
Condition: Incremented by one for each
second in which EUL rate congestion is
detected.
Counter type: PEG
Scanner: Not included in any predefined
scanner
Counter is reset after measurement
period: Yes
Counter context: SRNC