0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
12 Ansichten2 Seiten
This document provides a revision sheet for the final exam of the ENG466 Concrete Design course, summarizing the key topics covered in each chapter. These include transverse and longitudinal shear design, torsion, bond stress development, one-way and two-way slab design, column design under uniaxial and biaxial bending, footing design for shallow and deep foundations, and an overview of prestressed concrete theory and loss of prestress over time.
This document provides a revision sheet for the final exam of the ENG466 Concrete Design course, summarizing the key topics covered in each chapter. These include transverse and longitudinal shear design, torsion, bond stress development, one-way and two-way slab design, column design under uniaxial and biaxial bending, footing design for shallow and deep foundations, and an overview of prestressed concrete theory and loss of prestress over time.
This document provides a revision sheet for the final exam of the ENG466 Concrete Design course, summarizing the key topics covered in each chapter. These include transverse and longitudinal shear design, torsion, bond stress development, one-way and two-way slab design, column design under uniaxial and biaxial bending, footing design for shallow and deep foundations, and an overview of prestressed concrete theory and loss of prestress over time.
Transverse shear design. Calculation of reinforcement diameter and spacing to resist transverse shear Longitudinal shear Cover and spacing
Chap 6
Torsion and shear. Maximum Torsion
Torsional reinforcement Combined effect of Shear force and Torsion Formulae for young modulus and other constants
Chap 7
Bond and stress development
Design formulas for stress development for different type of bars Bars in tension and Compression Standard hooks and cog
Chap 8
One way and Two way slab
One way slab. Simplified method of analysis deflection check. Two way slab. Simplified method of analysis. Reinforcement requirements. Corner reinforcement Multispan two way slab. Design strip. Reinforcement requirement Punching shear
Chap 9 Column
Centrally loaded column. Location of plastic centre.
Uniaxial bending. Balanced, Tension and Compression failure. Interaction diagram Capacity reduction factor Preliminary design procedure Short column Slender column Moment magnifier for slender column. Braced and unbraced. Biaxial bending effect and check with interaction formula.
Chap 11 Footings
Column footings Shallow footings Deep footing Eccentric loading and Moments
Dr. Mirvat Bulbul-EnCE335 Fundamentals of Reinforced Concrete Design According ACI 318-05-Birzeit University, Palestinian جامعة بيرزيت هي جامعة فلسطينية (2011-2012)
Effect of Small Circular Opening On The Shear and Flextural Behavior and Ultimate Strength of Reinforced Concrete Beams Using Normal and High Strength Concrete