0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
113 Ansichten1 Seite
This note provides fabrication and welding specifications for a spool. It specifies that fabrication and welding must comply with TransCanada specification 25472-100-3PS-NWP0-W0003REV.02 and other referenced documents. Non-destructive examination can only be done by Rambler. All materials are supplied by Whaler Industrial Contracting. Dimensions are in millimeters unless otherwise noted and have a tolerance of +/-3mm. Attachments to the spool must be 6mm continuous fillet welds unless otherwise specified. Spools must be thoroughly cleaned with all openings covered before shipping.
This note provides fabrication and welding specifications for a spool. It specifies that fabrication and welding must comply with TransCanada specification 25472-100-3PS-NWP0-W0003REV.02 and other referenced documents. Non-destructive examination can only be done by Rambler. All materials are supplied by Whaler Industrial Contracting. Dimensions are in millimeters unless otherwise noted and have a tolerance of +/-3mm. Attachments to the spool must be 6mm continuous fillet welds unless otherwise specified. Spools must be thoroughly cleaned with all openings covered before shipping.
This note provides fabrication and welding specifications for a spool. It specifies that fabrication and welding must comply with TransCanada specification 25472-100-3PS-NWP0-W0003REV.02 and other referenced documents. Non-destructive examination can only be done by Rambler. All materials are supplied by Whaler Industrial Contracting. Dimensions are in millimeters unless otherwise noted and have a tolerance of +/-3mm. Attachments to the spool must be 6mm continuous fillet welds unless otherwise specified. Spools must be thoroughly cleaned with all openings covered before shipping.
1) FABRICATION IN ACCORDANCE WITH TRANSCANADA SPEC 25472-100-3PS-NWP0-W0003REV.02,
TES-DV0505 REV.01 & NCP4698-UEL-SP-001 REV.3. 2) WELDING & NDE IN ACCORDANCE WITH TES-WELD-AS REV.04. 3) NDE ADMINISTRATION ONLY BY RAMBLER 4) ALL MATERIALS SUPPLIED BY WHALER INDUSTRIAL CONTRACTING. 5) ALL DIMENSIONS IN mm UNLESS OTHERWISE NOTED & SHALL BE CONSIDERED NOMINAL WITH A DIMENSIONAL TOLERANCE OF +/-3mm. 6) ALL ATTACHMENTS TO SPOOL TO BE 6mm CONTINOUS FILLET WELDS UNLESS OTHERWISE NOTED. 7) SPOOLS TO BE THOROUGHLY CLEANED WITH ALL OPENINGS COVERED PRIOR TO SHIPPING.
Welding for Challenging Environments: Proceedings of the International Conference on Welding for Challenging Environments, Toronto, Ontario, Canada, 15–17 October 1985