This project will blink a LED on Port 2 of any 8051 based Microcontroller
You can open this project 'led test.Uv2' in Keil Compiler
Download Keil for C51 MCUs from http://www.keil.com/ Connect a LED in this way: Anode of LED should go to VCC via a current limiting resistor can be any value b eween 470 Ohm to 1K Cathode of LED should go to any Port 2 pins of MCU For 40 pin AT89S52 or similar Port 2 is from Pins 21 to 28 470-1K LED VCC o----/\/\/\----|>---o Any pin on Port 2 Copyright Sunrom Technologies 2006 http://ww.sunrom.com