Beruflich Dokumente
Kultur Dokumente
Page 1
Requirements:
To support a Voice LAN (VLAN) environment, we typically require the following options in the native DHCP
server:
In these examples, we assume that the Mitel IP phone is in VLAN2 and that internal DHCP in the 3300 ICP is
used to serve VLAN 2.
Page 2
1. Click Action, and then click Set Predefined Options… as shown in Figure 2.
2. Click Add.
Page 3
3. In Name, enter your choice of option, as shown in Figure 3.
4. In Data type, select IP Address.
5. In Code, enter 128, and click OK.
6. Enter the IP address of the RTC as your standard TFTP for set firmware (option 128), as shown in Figure 4.
Page 4
7. Repeat this process (Step 4 through Step 9) for the remaining options. Refer to the screen shots below:
Page 5
For Option 130:
Page 6
For Option 132:
Page 7
For Option 133:
Page 8
After all the options are enabled, create a new Scope. In this example, we have created Scope 192.68.1.0. Ensure
that you check off the required options 128,129,130,132,133 in the Scope Options of the corresponding scope’s
folder.
All of the necessary work for Windows 2003 server is now complete. You will need to enable the 3300 ICP
internal DHCP to enable option 128,129 and 130. Refer to the 3300 ICP System Administration Tool on-line help
for instructions.)
Note: L2 port setting and VLAN configuration of the L2 switch must be set up accordingly to make this work.
Page 9