Beruflich Dokumente
Kultur Dokumente
WhisperTek surface
Single installation
December 2015
Laser level
Unroll the surface and allow it to rest while laying flat for 48 hours before installation
On the front of the surface, place a small mark at the top to indicate the centerline
December 2015
c. With the center held securely, and the right edge held a few inches away from the wall, start
smoothing the surface against the wall starting at the center and working towards the edge. To
prevent air bubbles, move your hands in a sweeping motion starting at the middle and going
out towards the top and bottom of the surface as you move towards the edge.
December 2015
2015 Nureva Inc. All rights reserved. Nureva, Span, the Nureva logo and the Span logo are trademarks of Nureva Inc. in the
United States, Canada and other countries.