Beruflich Dokumente
Kultur Dokumente
www.kmg.agh.edu.pl
piotr.kasza@agh.edu.pl, piotr.kulinowski@agh.edu.pl
tel/fax +48126335162
piotr.kasza@agh.edu.pl, piotr.kulinowski@agh.edu.pl
tel/fax +48126335162
1 lb = 0.4536 kg
1 ft3 = 0.0283 m3
www.kmg.agh.edu.pl
2.
3.
4.
5.
6.
27
The surcharge angle, on the average, will be 5 degrees to 15 degrees less than the angle of repose.
(ex. 27 - 12 = 15)
Determine the density of the material in pounds per cubic foot
(lb/ft3).
Coal, anthracite, sized
55-60
Choose the idler shape.
Select a suitable conveyor belt speed.
Convert the desired tonnage per hour (tph) to be conveyed to the
equivalent in cubic feet per hour (ft3/hr).
(ex. 1000 tph x 2000 / 60 = 33333 ft3/hr)
Convert the desired capacity in cubic feet per hour to the
equivalent capacity at a belt speed of 100 fpm.
tel/fax +48126335162
1 lb = 0.4536 kg
1 ft3 = 0.028 m3
1 ft2 = 0.093 m2
www.kmg.agh.edu.pl
piotr.kasza@agh.edu.pl, piotr.kulinowski@agh.edu.pl
tel/fax +48126335162
Idler Spacing
www.kmg.agh.edu.pl
Factors to consider when selecting idler spacing are belt weight, material weight, idler load rating, belt
sag, idler life, belt rating, belt tension, and radius in vertical curves
piotr.kasza@agh.edu.pl, piotr.kulinowski@agh.edu.pl
tel/fax +48126335162