0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
23 Ansichten1 Seite
Click on "Pick Well" button and select the well by double-clicking on the name click on "Dynamometer" button. Place the 30k HT on the carrier bar below the permanent clamp and any other equipment, such as rod rotator. Click on "Report" button After two complete strokes the surface and pump dynamometer cards are displayed in real time.
Click on "Pick Well" button and select the well by double-clicking on the name click on "Dynamometer" button. Place the 30k HT on the carrier bar below the permanent clamp and any other equipment, such as rod rotator. Click on "Report" button After two complete strokes the surface and pump dynamometer cards are displayed in real time.
Click on "Pick Well" button and select the well by double-clicking on the name click on "Dynamometer" button. Place the 30k HT on the carrier bar below the permanent clamp and any other equipment, such as rod rotator. Click on "Report" button After two complete strokes the surface and pump dynamometer cards are displayed in real time.
Place the 30k HT on the carrier bar below the permanent
clamp and any other equipment, such as rod rotator.
When unit is running the click the Start
New Test button. OR Press the Acquire Button at the 30K Wireless Sensor
Click on Report button
After two complete strokes the surface and pump dynamometer cards are displayed in real time. End Acquisition by pressing the Acquisition button on the sensor. QAD 5000-4