Beruflich Dokumente
Kultur Dokumente
10
Hello,
some time ago i had problem with connecting two Huawei e3131 Hilink modems to
Ubuntu.
Hilink formware installed on modem makes it impossible.
To make the switch plug in the modem wait for Hilink to initialize and go to:
HTML Code:
http://192.168.1.1
Make sure automatic connect and reconect is disabled, disable everything even delete
AP using web page.
go to:
HTML Code:
http://192.168.1.1/html/switchProjectMode.html
modem will disconnect and switch to serial, new device should apear in:
HTML Code:
/dev/ttyUSB*
Remove the modem and plug it again for changes to take effect.
If after pluging in there are no /dev/ttyUSB* devices check lsusb:
Code:
# lsusb
Bus 002 Device 002: ID 12d1:1c05
3G broadband stick (modem on)
Bus 003 Device 002: ID 0930:0508
HCI
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Foundation
Foundation
Foundation
Foundation
2.0
2.0
1.1
1.1
root
root
root
root
hub
hub
hub
hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
to connect execute:
Code:
wvdial aero1
wvdial aero2