Beruflich Dokumente
Kultur Dokumente
(Component catalogue)
Revision [0A]
[Date 11.01.2011]
Table of contents
Page
1
1.1
1.2
1.3
1.4
1.5
1.6
Supplementry information
General notes
Materials & bolting
Applicable codes and standards
Definitions and abbreviations
Fabrication
Tagging of Support Components
2
2.1
2.2
3
4
5
6
7
8
9
10
11
12
13
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
3 of 125
4
4
4
5
5
6
6
Document title
Project name
File name
[Additional info].
7
7
11
20
28
34
49
66
74
89
92
107
113
121
Supplementry information
All welds to be 5mm throat continuous fillet unless noted otherwise (See 1.5).
All weep holes shall be sealed with suitable sealant for operating temperatures of -55C to
180C
All clearance holes shall be drilled 2mm oversize up to & incl. M24 and 3mm oversize for
M30 upwards
Minimum temperatures noted on closed welded attachments such as Trunnions, wear pads
etc. should be observed as a precaution to the effect of stress corrosion cracking.
Where a standard component gives a choice of material refer to the pipe support detail
drawing for chosen material.
Carbon steel for hanger components, trunnions and shoe base plates
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
4 of 125
Document title
Project name
File name
[Additional info].
NOTE For piping attachments material as parent pipe may be selected i.e. Trunnions, wear
plates ETC.
Bolting/Hanger components
All threads shall be Metric Coarse Pitch Right hand thread UNO
All bolts shall be grade 8.8 supplied complete with 2 full nuts & 2 plain washers
SI-2001 (1999)
ASME VIII
WRC 297
Local Stresses in Cylindrical Shells due to External Loads on nozzles,
supplement to WRC bulletin No. 107.
EN 13480-3
BS 5950
NS3472
Blast
BS
British Standard.
CFW
EN
European Standard.
GRE
NS
Norwegian Standard.
PED
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
5 of 125
Document title
Project name
File name
[Additional info].
PS
Pipe Support
Sch
Pipe Schedule.
WA
Welded Attachment.
1.5 Fabrication
The standard weld size to be used for pipe support fabrication shall be a=0.7 WT but max
5mm (throat) continuous fillet weld.
Full penetration welds shall be employed on all closed structural sections (SHS, RHS CHS
etc.) UNO
Fabrication of pipe supports shall comply with the relevant project Fabrication document, for
example BS 5950 : Design, Fabrication and Erection of Structural Steelwork or Norsok M101 : Structural Steel Fabrication.
1.5.1 Nuts, bolts and u bolts
All components to be hot dipped galvanized to ASTM A153.
Nuts and locknuts shall be in accordance with BS 3692, or equivalent, Grade 8.
Bolts shall be in accordance with BS 3692, or equivalent, Grade 8.8.
Washers shall be in accordance with BS 4320 Table 1, or equivalent.
Unless otherwise specified threads shall be Metric Coarse Pitch, right hand thread.
Where connections are made to pipe flanges the nuts and bolts shall be to the relevant Pipe
Specification.
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
6 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
7 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
8 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
9 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
10 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
11 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
12 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
13 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
14 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
15 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
16 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
17 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
18 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
19 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
20 of 125
Document title
Project name
File name
[Additional info].
A3.01 - LG-01 Longitudinal guide for cs, ss and alloy lines 2NB 10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
21 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
22 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
23 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
24 of 125
Document title
Project name
File name
[Additional info].
A3.05 LG-05 Bolted guide for CS, SS and alloy lines 2NB 10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
25 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
26 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
27 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
28 of 125
Document title
Project name
File name
[Additional info].
A4.01 LS-01 Line stop for un-insulated lines, CS,SS and alloy 2NB 40NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
29 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
30 of 125
Document title
Project name
File name
[Additional info].
A4.03 LS-03 Line stop on shoes for GRE lines 2NB 24NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
31 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
32 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
33 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
34 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
35 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
36 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
37 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
38 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
39 of 125
Document title
Project name
File name
[Additional info].
A5.06 MI-06 Insulating wrapper for CS, SS and alloy lines (high temperature)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
40 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
41 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
42 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
43 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
44 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
45 of 125
Document title
Project name
File name
[Additional info].
A5.12 MI-12 Welded vent and drain brace for CS, SS and alloy lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
46 of 125
Document title
Project name
File name
[Additional info].
A5.13 MI-13 Clamped vent and drain brace for CS, SS and alloy lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
47 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
48 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
49 of 125
Document title
Project name
File name
[Additional info].
A6.01 PC-01 U strap for CS,SS and alloy lines 22 NB 24 NB (NON GRIP)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
50 of 125
Document title
Project name
File name
[Additional info].
A6.02 PC-02 U-Strap for CS, SS and alloy lines 2NB - 8NB (grip)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
51 of 125
Document title
Project name
File name
[Additional info].
A6.03 PC-03 2 Bolt pipe clamp for CS, SS and alloy lines (light loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
52 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
53 of 125
Document title
Project name
File name
[Additional info].
A6.05 PC-05 2 Bolt pipe clamp for CS, SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
54 of 125
Document title
Project name
File name
[Additional info].
A6.06 PC-06 4 Bolt pipe clamp for CS, SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
55 of 125
Document title
Project name
File name
[Additional info].
A6.07 PC-07 3 Bolt pipe clamp for CS, SS and alloy lines (light loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
56 of 125
Document title
Project name
File name
[Additional info].
A6.08 PC-08 3 Bolt pipe clamp for CS, SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
57 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
58 of 125
Document title
Project name
File name
[Additional info].
A6.10 PC-10 U-Bolt for CS, SS and alloy lines NB 8NB (Grip)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
59 of 125
Document title
Project name
File name
[Additional info].
A6.11 PC-11 U-Bolt for CS, SS and alloy lines 1/2NB 8NB (non grip)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
60 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
61 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
62 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
63 of 125
Document title
Project name
File name
[Additional info].
A6.15 PC-15 Pipe clamp with welded bracket for CS, SS and alloy lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
64 of 125
Document title
Project name
File name
[Additional info].
A6.16 PC-16 Pipe clamp with bolted brackets for CS,SS and alloy lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
65 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
66 of 125
Document title
Project name
File name
[Additional info].
A7.01 PT-01 Single plate trunnion for CS, SS and alloy lines (light loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
67 of 125
Document title
Project name
File name
[Additional info].
A7.02 PT-02 Single plate trunnion for CS, SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
68 of 125
Document title
Project name
File name
[Additional info].
A7.03 PT-03 Double plate trunnion for CS, SS and alloy lines (light loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
69 of 125
Document title
Project name
File name
[Additional info].
A7.04 PT-04 Double plate trunnion for CS,SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
70 of 125
Document title
Project name
File name
[Additional info].
A7.05 PT-05 4 Point plate trunnion for CS,SS and alloy lines (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
71 of 125
Document title
Project name
File name
[Additional info].
A7.06 PT-06 Plate trunnion for GRE lines 2NB 10NB (light loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
72 of 125
Document title
Project name
File name
[Additional info].
A7.07 PT-07 Plate trunnion for GRE lines 12NB 24NB (heavy loads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
73 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
74 of 125
Document title
Project name
File name
[Additional info].
A8.01 SC-01 Solid forged eye rod (left hand or right hand threads)
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
75 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
76 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
77 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
78 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
79 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
80 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
81 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
82 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
83 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
84 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
85 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
86 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
87 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
88 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
89 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
90 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
91 of 125
Document title
Project name
File name
[Additional info].
10
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
92 of 125
Document title
Project name
File name
[Additional info].
A10.01 SH-01 Welded shoe for carbon steel lines 2NB 10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
93 of 125
Document title
Project name
File name
[Additional info].
A10.02 SH-02 Welded shoe for SS and alloy lines 2NB -10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
94 of 125
Document title
Project name
File name
[Additional info].
A10.03 SH-03 Welded shoe for carbon steel lines 12NB 36NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
95 of 125
Document title
Project name
File name
[Additional info].
A10.04 SH-04 Welded shoe for SS and alloy lines 12NB 36NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
96 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
97 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
98 of 125
Document title
Project name
File name
[Additional info].
A10.07 SH-07 Clamped shoe for CS,SS and alloy lines 2NB-6NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
99 of 125
Document title
Project name
File name
[Additional info].
A10.08 SH-08 Clamped shoe for CS, SS and alloy lines 8NB 24NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
100 of 125
Document title
Project name
File name
[Additional info].
A10.09 SH-09 Cold service slamped shoe for CS, SS and alloy lines 2NB 8NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
101 of 125
Document title
Project name
File name
[Additional info].
A10.10 SH-10 Cold service clamped shoe for CS,SS and alloy lines 10NB 24NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
102 of 125
Document title
Project name
File name
[Additional info].
A10.11 SH-11 Cold service welded shoe for CS,SS and alloy lines 2NB 10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
103 of 125
Document title
Project name
File name
[Additional info].
A10.12 SH-12 Cold service welded shoe for CS,SS and alloy lines 10NB -24NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
104 of 125
Document title
Project name
File name
[Additional info].
A10.13 SH-13 Short clamped shoe for CS,SS and alloy lines 2NB 6NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
105 of 125
Document title
Project name
File name
[Additional info].
A10.14 SH-14 Short clamped shoe for CS,SS and alloy lines 8NB-10NB
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
106 of 125
Document title
Project name
File name
[Additional info].
11
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
107 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
108 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
109 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
110 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
111 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
112 of 125
Document title
Project name
File name
[Additional info].
12
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
113 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
114 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
115 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
116 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
117 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
118 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
119 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
120 of 125
Document title
Project name
File name
[Additional info].
13
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
121 of 125
Document title
Project name
File name
[Additional info].
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
122 of 125
Document title
Project name
File name
[Additional info].
A13.02 WP-02 Wear / reinforcing plate for stainless and alloy steel lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
123 of 125
Document title
Project name
File name
[Additional info].
A13.03 WP-03 Full encirclement reinforcing plate for CS, SS and alloy lines
Document number
Revision number
Responsible
Date
Page
2219-SA-L-0001
0A
John Hopkins
11.01.2012
124 of 125
Document title
Project name
File name
[Additional info].