Parameter (V6.50.103)

ZXUR 9000 GSM
Base Station Controller
Radio Parameters Reference

Version: V6.50.103
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Additionally, the contents of this document are protected by
contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No.
Revision Date
Revision Reason
R1.0
20130717
First Edition
Serial Number: SJ-20130408140048-016

Publishing Date: 2013-07-17(R1.0)
SJ-20130408140048-016|2013-07-17(R1.0)
ZTE Proprietary and Confidential
Contents
About This Manual ......................................................................................... I
Chapter 1 User Guideline........................................................................... 1-1
Chapter 2 GSM Radio Parameters ............................................................ 2-1
2.1 GSM Logical Configuration (GBssFunction) ......................................................... 2-2
2.1.1 User Label ............................................................................................... 2-2
2.1.2 BSS ID .................................................................................................... 2-3
2.1.3 Managed Object Description ..................................................................... 2-4
2.1.4 BSC Sequence ........................................................................................ 2-5
2.1.5 Load indication allowed ............................................................................ 2-6
2.1.6 Load indication Valid Time ........................................................................ 2-7
2.1.7 Load Indication Period .............................................................................. 2-8
2.1.8 Send assignment failure allowed in outer direct retry procedure .................. 2-9
2.1.9 TFO Enable ........................................................................................... 2-10
2.1.10 Report voice quality .............................................................................. 2-12
2.1.11 R99 Ind ................................................................................................ 2-13
2.1.12 DCS1800/PCS1900 support.................................................................. 2-14
2.1.13 External cell load notify ......................................................................... 2-15
2.1.14 Neighbor cell load valid duration ............................................................ 2-16
2.1.15 Pre-Access Control for IP Transmission ................................................. 2-17
2.1.16 Using load information provided by CRRM ............................................. 2-17
2.1.17 Automatic Resource Indication Threshold .............................................. 2-18
2.1.18 Access class parameter config select .................................................... 2-20
2.1.19 First barred class.................................................................................. 2-21
2.1.20 Barred class windows ........................................................................... 2-22
2.1.21 Barred time step................................................................................... 2-23
2.1.22 Access Control ..................................................................................... 2-24
2.1.23 Paging repeat number .......................................................................... 2-25
2.1.24 Congestion Threshold for Send Load Indication...................................... 2-26
2.1.25 Forbid Handover According to Resource Threshold of Load Indication ..... 2-27
2.1.26 Resource Threshold of Load Indication for Forbid Handover ................... 2-28
2.1.27 Force FACCH....................................................................................... 2-29
2.1.28 Use system message method when MSC over loaded or link blocked...... 2-30
2.1.29 Start system message method for CPU overload.................................... 2-32
I
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.30 Start FUC flow control for CPU overload ................................................ 2-33
2.1.31 The maximum control level for MSC overload or link block ...................... 2-34
2.1.32 Start limit of system message method for CPU overload ......................... 2-35
2.1.33 Start limit of FUC flow control for CPU overload...................................... 2-36
2.1.34 B2 support AMR................................................................................... 2-37
2.1.35 Enable power dynamic sharing.............................................................. 2-38
2.1.36 Power congest delay ............................................................................ 2-39
2.1.37 Time interval of channel power adjustment based on power dynamic
sharing ................................................................................................. 2-40
2.1.38 If paging flow control due to high CPU ................................................... 2-41
2.1.39 CPU threshold of paging flow control ..................................................... 2-42
2.1.40 Radio pre-access procedure switch ....................................................... 2-43
2.1.41 Transport Pre-Access Flag.................................................................... 2-44
2.1.42 The switch of sending Immediate assign message and radio channel
activating synchronously........................................................................ 2-45
2.1.43 FO report for CS................................................................................... 2-46
2.1.44 FO report for PS................................................................................... 2-47
2.1.45 FO report for DBS ................................................................................ 2-48
2.1.46 Inter BSC handover out on SDCCH permitted ........................................ 2-48
2.1.47 The switch of connection and radio channel activating synchronization ..... 2-50
2.1.48 Use BER to average quality .................................................................. 2-51
2.1.49 Check IMSI when access ...................................................................... 2-52
2.1.50 Include BTS power in MR ..................................................................... 2-53
2.1.51 Measurement Result Recording Interval in MSC Invoke Trace................. 2-54
2.1.52 Preprocessed Measurement Result Recording Interval in MSC Invoke
Trace ................................................................................................... 2-55
2.1.53 Enhanced and Preprocessde MR report................................................. 2-56
2.1.54 Preferred speech version for FR ............................................................ 2-57
2.1.55 Preferred speech version for HR ........................................................... 2-58
2.1.56 Dynamic HR support indication.............................................................. 2-59
2.1.57 HR channel fragment finishing support................................................... 2-60
2.1.58 BCCH switch allowed ........................................................................... 2-61
2.1.59 Dynamic configuration SDCCH.............................................................. 2-62
2.1.60 Scan SDCCH ....................................................................................... 2-63
2.1.61 Scan BCCH ......................................................................................... 2-64
2.1.62 BCCH starting delay ............................................................................. 2-65
2.1.63 BCCH finishing delay............................................................................ 2-66
2.1.64 TCH->SDCCH limit............................................................................... 2-67
II
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.65 SDCCH->TCH delay............................................................................. 2-68

2.1.66 Minimum Tch reserved for dynamic SDCCH........................................... 2-69
2.1.67
Baseband frequency hopping
TRX exchange support
............................................................................................................ 2-70
2.1.68 The method of intelligent TRX poweroff.................................................. 2-72
2.1.69 IBS shutdown limit ................................................................................ 2-73
2.1.70 IBS powerup limit ................................................................................. 2-73
2.1.71 IBS powerover limit............................................................................... 2-74
2.1.72 IBS power priority ................................................................................. 2-75
2.1.73 BCCH forbidden TS merger time bitmap ................................................ 2-76
2.1.74 The master power control option of intelligent TRX poweroff system ........ 2-77
2.1.75 Baseband resource share support ......................................................... 2-78
2.1.76 TRX Selection priority for baseband share ............................................. 2-79
2.1.77 Number of BA Ranges ......................................................................... 2-80
2.1.78 BA Range Lower ................................................................................. 2-81
2.1.79 BA Range Higher ................................................................................. 2-82
2.1.80 If get Utran classmark information from UE ............................................ 2-83
2.1.81 IPA AMR start mode ............................................................................. 2-84
2.1.82 Send OVERLOAD message to MSC...................................................... 2-85
2.1.83 Use Load of Subcell1 as Load of Cell .................................................... 2-86
2.1.84 Enough MS MR For Connection Failure After Handover.......................... 2-87
2.1.85 Ts Block Alarm Switch .......................................................................... 2-88
2.1.86 BVC Block Alarm Switch ....................................................................... 2-89
2.1.87 AMR full Active Codec Set(4.75kbps) .................................................... 2-90
2.1.89 AMR full Active Codec Set(5.9kbps) ...................................................... 2-92
2.1.95 AMR Half Active Codec Set(4.75kbps)................................................... 2-97
2.1.96 AMR Half Active Codec Set(5.15kbps)................................................... 2-98
2.1.97 AMR Half Active Codec Set(5.9kbps)..................................................... 2-99
2.1.98 AMR Half Active Codec Set(6.7kbps)....................................................2-100
III
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.99 AMR Half Active Codec Set(7.4kbps)....................................................2-101

2.1.100 Thresholds of AMR FR 1....................................................................2-102
2.1.107 Thresholds of AMR HR 1 ................................................................... 2-110
2.1.110 Thresholds of AMR HR 4.................................................................... 2-113
2.1.111 Thresholds of AMR HR 5 .................................................................... 2-114
2.1.112 Hysteresis of AMR FR 1 ..................................................................... 2-115
2.1.116 Hysteresis of AMR FR 5 .....................................................................2-120
2.1.119 Hysteresis of AMR HR 1.....................................................................2-124
2.1.120 Hysteresis of AMR HR 2 ....................................................................2-125
2.1.124 Enable AMR FR noise control.............................................................2-130
2.1.125 AMR FR Initial codec mode ................................................................2-131
2.1.126 AMR FR Start mode ..........................................................................2-132
2.1.127 Enable AMR HR noise control ............................................................2-133
2.1.128 AMR HR Initial codec mode ...............................................................2-134
2.1.129 AMR HR Start mode ..........................................................................2-135
2.1.130 Hysteresis of AMRWFS 1...................................................................2-136
2.1.134 Hysteresis of AMROWFS 1 ................................................................2-141
IV
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.136 Hysteresis of AMROWHS 1................................................................2-144

2.1.138 Thresholds for AMRWFS 1.................................................................2-146
2.1.142 Thresholds for AMROWFS 1 ..............................................................2-151
2.1.144 Thresholds for AMROWHS 1..............................................................2-153
2.1.146 Busy threshold of sub cell ..................................................................2-155
2.1.147 Support of SON Transfer Application ..................................................2-156
2.1.148 Circuit data handover control..............................................................2-157
2.1.149 Cell Bar when A break .......................................................................2-158
2.1.150 VAMOS II prior to pair with non saic UE ..............................................2-159
2.1.151 Send Paging CS on CCCH or not when PS instance exists ..................2-160
2.1.152 If support mute call detect ..................................................................2-162
2.1.153 P value of MUTE SAIC MS capability detection ...................................2-163
2.1.154 N value of SAIC AFC MS capability detection ......................................2-163
2.1.155 N value of MUTE SAIC MS capability detection ...................................2-164
2.1.156 Whether using Frequency List describe channel frequency hopping of
assignment command ..........................................................................2-165
2.1.157 P value of SAIC AFC MS capability detection ......................................2-166
2.1.158 Allow assign according first measurement report when use cobcch.......2-167
2.1.159 Immediate assignment repeat.............................................................2-168
2.1.160 Immediate assignment priority ............................................................2-169
2.1.161 Switch of TRAU frame synchronized monitor .......................................2-170
2.1.162 Delay of TS forcible release ...............................................................2-171
2.1.163 Delay protection ................................................................................2-172
2.1.164 DTMF Enable ....................................................................................2-173
2.1.165 Max ta and measure report times in LCS.............................................2-174
2.1.166 Reassign enable................................................................................2-175
2.1.167 Reassign level threshold ....................................................................2-176
2.1.168 Max times of reassign ........................................................................2-177
2.1.169 Use Reserved Channel ......................................................................2-178
2.2 BSS Function Timer (GBssFunctionTimer) ........................................................2-179
2.2.1 BSS Function Timer ID ..........................................................................2-179
2.2.2 Protective time waiting for access...........................................................2-179
V
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.3 Protection time for link establishment response .......................................2-181

2.2.4 SAPI3 link establishment time ................................................................2-182
2.2.5 Protective time that responses external handover completion
message .............................................................................................2-183
2.2.6 External handover protective time ..........................................................2-184
2.2.7 Protective time for RF channel release ...................................................2-185
2.2.8 Starting time for oriented retry ................................................................2-186
2.2.9 Encryption mode modification time .........................................................2-187
2.2.10 Mode modification process time ...........................................................2-188
2.2.11 Continue timer for mode modify ............................................................2-189
2.2.12 First overload period of flow traffic control .............................................2-190
2.2.13 Second overload period of flow traffic control.........................................2-191
2.2.14 Immediate assignment period...............................................................2-193
2.2.15 Handover period of source cell .............................................................2-194
2.2.16 Assignment period...............................................................................2-195
2.2.17 TCH Channel release period ................................................................2-196
2.2.18 TCH Channel deactivation delay ..........................................................2-197
2.2.19 RLSD message receive protection timer ...............................................2-198
2.2.20 Channel activation protection timer .......................................................2-200
2.2.21 MSC clear command protection timer ...................................................2-201
2.2.22 SCCP connection protection timer ........................................................2-202
2.2.23 Time of micro-micro handover delay .....................................................2-203
2.2.24 TFI and USF release timer ...................................................................2-204
2.2.25 TBF release timer................................................................................2-205
2.2.26 TBF protect time when radio link failure ................................................2-206
2.2.27 Bvc block/unblock retry time.................................................................2-207
2.2.28 Bvc reset retry time..............................................................................2-209
2.2.29 Suspend retry time ..............................................................................2-210
2.2.30 Resume retry time ............................................................................... 2-211
2.2.31 Access capability update retry time.......................................................2-213
2.2.32 PFC creating retry time ........................................................................2-214
2.2.33 PFC modifying retry time......................................................................2-215
2.2.34 Supervision Timer of LCS ....................................................................2-216
2.2.35 Radio Timer of LCS .............................................................................2-217
2.2.36 LCS wait intra BSS handover timer.......................................................2-218
2.2.37 PS channel delay release timer ............................................................2-219
2.2.38 Ater wait SCCP connection timer..........................................................2-220
2.2.39 Ater wait resource acknowledge timer...................................................2-221
VI
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.40 Ater wait resource timer .......................................................................2-223

2.2.41 Ater wait resource release timer ...........................................................2-224
2.2.42 Ater handover monitor timer .................................................................2-225
2.2.43 HO performed ack timer.......................................................................2-226
2.2.44 RIR Timer ...........................................................................................2-227
2.2.45 RI Timer..............................................................................................2-228
2.2.46 RIAE Timer .........................................................................................2-229
2.2.47 Time to wait A handover request ..........................................................2-230
2.2.48 Timer to wait a relocation commit MSG from RNC .................................2-231
2.2.49 Timer of TRAU frame Synchronization ..................................................2-232
2.2.50 Guards the PS handover required procedure ........................................2-233
2.2.51 Guard resource release after sending PS HO command ........................2-234
2.2.52 Time of waiting an internal HO command ..............................................2-235
2.2.53 Round trip delay ..................................................................................2-236
2.2.54 IP Abis Wait Timer ...............................................................................2-238
2.2.55 synchronization timer that ensures source BSS receives both PS and
CS responses ......................................................................................2-239
2.2.56 synchronization timer that ensures target BSS receives both PS and
CS requests ........................................................................................2-240
2.2.57 T3197.................................................................................................2-241
2.2.58 Paging Interval ....................................................................................2-242
2.2.59 2G Load synchronized to 3G Timer.......................................................2-243
2.2.60 2G Cell Radio Resource Synchronization Timer ....................................2-244
2.2.61 Handover protecting timer to WCDMA/FDD...........................................2-245
2.2.62 SubCell PingPong handover timer ........................................................2-246
2.2.63 Time of Cobcch wait for MR report........................................................2-248
2.2.64 SDCCH Channel release period ...........................................................2-249
2.2.65 SDCCH Channel deactivation delay .....................................................2-250
2.2.66 Mute call detect timer...........................................................................2-250
2.3 BSS Function Handover Control (GBssHandoverControl) ..................................2-251
2.3.1 BSC Handover Control ID ......................................................................2-251
2.3.2 Handover synchronization indication support...........................................2-252
2.3.3 Internal redirection enable......................................................................2-253
2.3.4 Outer redirection enable ........................................................................2-255
2.3.5 BSC intracell handover enable ...............................................................2-256
2.3.6 SDCCH handover enable.......................................................................2-257
2.3.7 Handover request response ...................................................................2-257
2.3.8 Old BSS to new BSS information............................................................2-259
VII
SJ-20130408140048-016|2013-07-17(R1.0)
2.3.9 Queuing indicator in handover required message ....................................2-260

2.3.10 A+B solution for TD handover enabled..................................................2-261
2.3.11 Pingpong handover duration.................................................................2-262
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch........2-263
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On Tch............2-264
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Sdcch..................................................................................................2-265
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Tch......................................................................................................2-266
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Sdcch ............................................................................................2-267
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Tch ................................................................................................2-268
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Sdcch..................................................................................................2-269
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Tch......................................................................................................2-270
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Sdcch..................................................................................................2-271
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Tch......................................................................................................2-272
2.3.22 BSC Internal Handover Parameter of IPA..............................................2-273
2.3.23 Handover between cells of different net support ....................................2-274
2.3.24 the policy of choosing speech version in 3GPP IPA BSC handover .........2-275
2.3.25 Forbid Handover during releasing.........................................................2-276
2.3.26 the interval of forbid Handover..............................................................2-277
2.3.27 Optimize when handover command lost................................................2-278
2.3.28 The delay after handover command when optimize ...............................2-279
2.4 eMLPP Configuration (GBssEmlpp)..................................................................2-280
2.4.1 eMLPP ID .............................................................................................2-280
2.4.2 Queue indicate when assign ..................................................................2-281
2.4.3 Queue allowed when handover ..............................................................2-282
2.4.4 Forced handover indication for assign.....................................................2-283
2.4.5 Forced handover indication for handover ................................................2-284
2.4.6 Forced release indicate when assign ......................................................2-285
2.4.7 Forced release allowed when handover ..................................................2-287
2.4.8 Wait resource timer after forced handover (ForceHoWait, 100ms) ............2-288
2.4.9 Wait resource timer after forced release..................................................2-289
2.4.10 Enough low priority for preemption........................................................2-290
VIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.4.11 Enough call duration for preemption......................................................2-291

2.4.12 Forced handover target penalty time.....................................................2-292
2.4.13 Priority of emergency service ...............................................................2-293
2.4.14 User priority threshold for EMLPP.........................................................2-294
2.4.15 Reserved channel first .........................................................................2-295
2.4.16 Support EMLPP(SupportEMLPP) .........................................................2-296
2.4.17 EMLPP channel reserved rate..............................................................2-297
2.5 eMLPP User Priority Configuration (GEmlppUserPriority)...................................2-298
2.5.1 eMLPP User Priority Configuration ID .....................................................2-298
2.5.2 User priority ..........................................................................................2-299
2.5.3 Strategy for preemption when assign ......................................................2-300
2.5.4 Strategy for preemption when handover..................................................2-301
2.5.5 Max forced handover times when assign ................................................2-303
2.5.6 Max forced handover times when handover ............................................2-304
2.5.7 Max forced release times when assign ...................................................2-305
2.5.8 Max forced release times when handover ...............................................2-306
2.5.9 Preemption duration when assign...........................................................2-307
2.5.10 Preemption duration when handover.....................................................2-308
2.5.11 Timer for start forced release when assign ............................................2-309
2.5.12 Timer for start forced release when handover ........................................2-310
2.5.13 Interval for search forced handover target when assign.......................... 2-311
2.5.14 Interval for search forced handover target when handover .....................2-313
2.5.15 Interval for search forced release target when assign.............................2-314
2.5.16 Interval for search forced release target when handover ........................2-315
2.5.17 Queue timer for assign.........................................................................2-316
2.5.18 Queue timer for handover ....................................................................2-317
2.6 BSS Function PS (GBssFunctionPS) ................................................................2-318
2.6.1 BSC PS ID............................................................................................2-318
2.6.2 Bvc flow control period...........................................................................2-319
2.6.3 MS flow control period ...........................................................................2-320
2.6.4 Max times of radio access capabilities update retry .................................2-321
2.6.5 Max times of PFC create retry ................................................................2-323
2.6.6 Max times of PFC modify retry ...............................................................2-324
2.6.7 Max times of Bvc block retry ..................................................................2-325
2.6.8 Max times of Bvc unblock retry...............................................................2-326
2.6.9 MAX times of Bvc reset retry ..................................................................2-327
2.6.10 Max times of suspend retry ..................................................................2-329
IX
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.11 Max times of resume retry ....................................................................2-330

2.6.12 Max allowed number of continuous losses of uplink data
blocks(N3101) .....................................................................................2-331
2.6.13 Times of packet uplink ACK/NACK retries(N3103) .................................2-332
2.6.14 Max allowed number of continuous losses of uplink RLC/MAC control
message(N3105) .................................................................................2-334
2.6.15 Bvc flow control support .......................................................................2-335
2.6.16 MS flow control support .......................................................................2-336
2.6.17 Bvc flow control R MIN value................................................................2-337
2.6.18 MS flow control R MIN value ................................................................2-339
2.6.19 Flow control mode ...............................................................................2-340
2.6.20 PFC support........................................................................................2-341
2.6.21 Net operation mode .............................................................................2-342
2.6.22 Page coordination support ...................................................................2-343
2.6.23 NACC support.....................................................................................2-345
2.6.24 LLC Transfer for SAPI0(Reserved) .......................................................2-346
2.6.25 LLC Transfer for SAPI1(LLGMM)..........................................................2-347
2.6.26 LLC Transfer for SAPI2(TOM2) ............................................................2-348
2.6.27 LLC Transfer for SAPI3(User-Data) ......................................................2-349
2.6.31 LLC Transfer for SAPI7(LLSMS)...........................................................2-354
2.6.32 LLC Transfer for SAPI8(TOM8) ............................................................2-355
2.6.34 LLC Transfer for SAPI10(Reserved) .....................................................2-358
2.6.35 LLC Transfer for SAPI11(User-Data).....................................................2-359
2.6.40 RIM support ........................................................................................2-365
2.6.41 RIM retry times....................................................................................2-366
2.6.42 TBF establish support ..........................................................................2-367
2.6.43 Signal extended uplink TBF support .....................................................2-368
2.6.44 Highest coding scheme of POC service in GPRS ..................................2-369
2.6.45 Highest coding scheme of POC service in EGPRS ................................2-370
2.6.46 Highest coding scheme of signal TBF ...................................................2-371
X
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.47 Support of enhanced radio status procedures........................................2-373

2.6.48 Support of PFC flow control procedures ................................................2-374
2.6.49 PS handover support ...........................................................................2-375
2.6.50 Max of sending PS handover required ..................................................2-376
2.6.51
Enable PS Handover Indications in Inter-BSS
handover
...........................................................................................................2-377
2.6.52 Request SI/PSI ...................................................................................2-378
2.6.53 Service UTRAN CCO support ..............................................................2-379
2.6.54 FANR in TBF support...........................................................................2-380
2.6.55 DLDC support .....................................................................................2-381
2.6.56 RTTI support .......................................................................................2-382
2.6.57 EGPRS2-A support .............................................................................2-384
2.6.58 EGPRS prior to GPRS Support ............................................................2-385
2.6.59 Allocating weights of EGPRS ...............................................................2-386
2.6.60 Choose PS route by NSVC ..................................................................2-387
2.6.61 Enable PS Uplink Power Control In Establishment Phase ......................2-388
2.6.62 DTM Enhance Capability .....................................................................2-389
2.6.63 Enable PCU resource alarm.................................................................2-390
2.6.64 E-UTRAN CCN support .......................................................................2-391
2.6.65 DTM Handover Support .......................................................................2-392
2.6.66 Continue with CS HO While PS HO is failure in DTM HO .......................2-393
2.6.67 Send suspend message when GPRS suspension .................................2-394
2.6.68 Send by SNDCP indicator ....................................................................2-395
2.6.69 TCP/IP performance enhance ..............................................................2-396
2.6.70 IP Segment Optimization .....................................................................2-397
2.6.71 Support resource optimizing by service .................................................2-398
2.6.72 Identify of special service .....................................................................2-399
2.6.73 Extended uplink dynamic allocation support ..........................................2-400
2.6.74 Resource pool for PS rate ....................................................................2-401
2.6.75 Max users of POC service on shared PS channel uplink ........................2-402
2.6.76 Max users of POC service on shared PS channel downlink ....................2-403
2.6.77 Optimized POC service support............................................................2-404
2.6.78 IP abis pool bandwidth restore support .................................................2-405
2.6.79 Max LLC num that per bssgp may save ................................................2-406
2.6.80 Max LLC num that per bssgp may transfer ............................................2-408
XI
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.81 RRM threshold ....................................................................................2-409

2.6.82 Parameter of Flow control mode 1 ........................................................2-410
2.6.83 Parameter of Flow control mode 2 ........................................................ 2-411
2.6.84 Coefficient of Bvc bucket size...............................................................2-412
2.6.85 Coefficient of MS bucket ......................................................................2-413
2.6.86 Enable implicit reject with paging ..........................................................2-414
2.6.87 Implicit reject CS and PS with paging....................................................2-415
2.6.88 PS service Bar when Gb break.............................................................2-416
2.6.89 CBL in Bvc/MS flow control ..................................................................2-417
2.7 Common Measure and Information Exchange (GCommMeas) ...........................2-418
2.7.1 Common Measure and Information Exchange ID.....................................2-418
2.7.2 Report characteristics ............................................................................2-419
2.7.3 Measurement Load Threshold 1 .............................................................2-420
2.7.4 Measurement RT Load Threshold 1........................................................2-421
2.7.5 Measurement NRT Load Threshold 1 .....................................................2-422
2.7.6 Measurement Load Threshold 2 .............................................................2-423
2.7.7 Measurement RT Load Threshold 2........................................................2-424
2.7.8 Measurement NRT Load Threshold 2 .....................................................2-425
2.7.9 Report periodicity unit ............................................................................2-426
2.7.10 Report Periodicity Value.......................................................................2-427
2.7.11 Measurement Hysteresis Time .............................................................2-428
2.7.12 Event Report Periodicity.......................................................................2-429
2.7.13 Information Report Type.......................................................................2-430
2.7.14 Measurement type...............................................................................2-431
2.7.15 Support of 2g request Iur-g ..................................................................2-432
2.7.16 Not Real Time Load Overflow Threshold ...............................................2-433
2.7.17 Not Real Time Load High Threshold .....................................................2-434
2.7.18 Not Real Time Load Low Threshold ......................................................2-435
2.8 BSC Precise Paging Configuration (GBssPrecisePaging) ..................................2-437
2.8.1 BSC Precise Paging Configuration ID .....................................................2-437
2.8.2 Support Precise Paging .........................................................................2-438
2.8.3 Use HPC for Precise Paging ..................................................................2-439
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service ................2-440
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service ................2-441
2.8.6 Allow Exceed area Precise Paging for Circuit Switched Service ...............2-442
2.8.7 Allow Exceed area Precise Paging for Packet Switched Service...............2-443
2.8.8 Paging Repeat Time for Circuit Switched Service ....................................2-444
XII
SJ-20130408140048-016|2013-07-17(R1.0)
2.8.9 Paging Repeat Time for Packet Switched Service ...................................2-445

2.9 BSC Reserved Configuration (GBssFunctionRsv)..............................................2-446
2.9.1 BSC Reserved Configuration ID .............................................................2-446
2.9.2 Global Reserved Parameter 1 ................................................................2-447
2.9.10 Global Reserved Parameter 9 ..............................................................2-454
2.9.11 Global Reserved Parameter 10.............................................................2-455
2.9.12 Global Reserved Parameter 11.............................................................2-456
2.9.13 Global Reserved Parameter 12 ............................................................2-456
2.10 External GSM Cell Configuration (GExternalGsmCell) .....................................2-465
2.10.1 External GSM Cell ID...........................................................................2-465
2.10.2 Cell Identity .........................................................................................2-466
2.10.3 BCCH arfcn ........................................................................................2-466
2.10.4 NCC ...................................................................................................2-467
2.10.5 BCC ...................................................................................................2-468
2.10.6 LAC (LAC) ..........................................................................................2-469
2.10.7 MCC...................................................................................................2-470
2.10.8 MNC...................................................................................................2-471
2.10.9 FreqBand............................................................................................2-472
2.10.10 Cell type ...........................................................................................2-473
2.10.11 GPRS service support........................................................................2-474
2.10.12 Allow SOLSA MS to access ...............................................................2-475
2.10.13 LSA ID ..............................................................................................2-476
XIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.14 RAC (RAC) .......................................................................................2-477

2.10.15 Cell bar access 2 ...............................................................................2-479
2.10.16 GPRS access minimal signal level in idle ............................................2-481
2.10.17 GPRS MAX initial access signal level in idle ........................................2-482
2.10.18 Cell reselection offset in idle ...............................................................2-483
2.10.19 Cell reselection temporary offset in idle ...............................................2-485
2.10.20 Penalty time of cell reselection in idle..................................................2-486
2.10.21 HSC exist in idle ................................................................................2-487
2.10.22 Threshold of HSC signal level in idle ...................................................2-488
2.10.23 HCS priority in idle.............................................................................2-489
2.10.24 GPRS access minimal signal level in transfer ......................................2-490
2.10.25 GPRS MAX initial access signal level in transfer ..................................2-492
2.10.26 Cell reselection offset in transfer .........................................................2-493
2.10.27 Cell reselection temporary offset in transfer .........................................2-494
2.10.28 Penalty time of cell reselection in transfer............................................2-496
2.10.29 HSC exist in transfer ..........................................................................2-497
2.10.30 Threshold of HSC signal level in transfer.............................................2-498
2.10.31 HCS priority in transfer.......................................................................2-499
2.10.32 MAX power level of MS......................................................................2-500
2.10.33 RemoteSp DN ...................................................................................2-502
2.10.34 Um soft Synchronous Support ............................................................2-502
2.11 External UTRAN FDD Cell Configuration (GExternalUtranCellFDD) ..................2-503
2.11.1 External UTRAN FDD Cell ID ...............................................................2-503
2.11.2 CI .......................................................................................................2-504
2.11.3 MCC ...................................................................................................2-505
2.11.4 MNC ...................................................................................................2-506
2.11.5 RNC ID ...............................................................................................2-507
2.11.6 LAC (LAC) ..........................................................................................2-508
2.11.7 UTRAN cell frequency..........................................................................2-509
2.11.8 Scrambling code..................................................................................2-510
2.11.9 TX diversity indication .......................................................................... 2-511
2.11.10 RAC (RAC) .......................................................................................2-512
2.11.11 Whether an external 3G cell is included in GSM system. ......................2-513
2.12 External UTRAN TDD Cell Configuration (GExternalUtranCellTDDLcr) .............2-514
2.12.1 External UTRAN TDD Cell ID ...............................................................2-514
2.12.2 CI .......................................................................................................2-515
2.12.3 MCC...................................................................................................2-516
XIV
SJ-20130408140048-016|2013-07-17(R1.0)
2.12.4 MNC...................................................................................................2-517
2.12.5 RNC ID...............................................................................................2-518
2.12.6 LAC (LAC) ..........................................................................................2-519
2.12.7 UTRAN cell frequency .........................................................................2-520
2.12.8 UTRAN TDD cell parameter .................................................................2-521
2.12.9 TX diversity indication ..........................................................................2-522
2.12.10 RAC (RAC) .......................................................................................2-522
2.12.11 UTRAN adjacent cell bandwidth..........................................................2-524
2.12.12 Apply Sync Case / Apply TSTD ..........................................................2-525
2.12.13
Whether an external 3G cell is included in
GSM system.
...........................................................................................................2-526
2.13 External E-UTRAN FDD Cell Configuration (GExternalEutranCellFDD).............2-527
2.13.1 External E-UTRAN FDD Cell Configuration ID .......................................2-527
2.13.2 MCC...................................................................................................2-528
2.13.3 MNC...................................................................................................2-528
2.13.4 EUTRAN NODEB Identification ............................................................2-529
2.13.5 Physical layer cell identity of LTE CELL.................................................2-530
2.13.6 specified EARFCN of E-UTRAN cells ...................................................2-531
2.13.7 Tracking area code ..............................................................................2-532
2.13.8 The attribute of LTE NodeB ..................................................................2-533
2.13.9 the minimum value of the channel bandwidth ........................................2-534
2.13.10 EUTRAN CELL Identification..............................................................2-535
2.14 External UTRAN FDD Cell CRRM Configuration (GCrrmNCellLdFDD)..............2-536
2.14.1 External UTRAN FDD Cell CRRM ID ....................................................2-536
2.14.2 Cs Remained User Num Low Threshold ...............................................2-537
2.14.3 Ps Remained User Num Low Threshold................................................2-538
2.14.4 Cs Remained User Num Medium Threshold..........................................2-539
2.14.5 Ps Remained User Num Medium Threshold..........................................2-540
2.14.6 Uplink Load Low Threshold ..................................................................2-541
2.14.7 Uplink Load Medium Threshold ............................................................2-542
2.14.8 Uplink Load High Threshold .................................................................2-543
2.14.9 Downlink Load Low Threshold..............................................................2-544
2.14.10 Downlink Load Medium Threshold ......................................................2-545
2.14.11 Downlink Load High Threshold ...........................................................2-546
2.14.12 Real Time Uplink Load Low Threshold ................................................2-547
XV
SJ-20130408140048-016|2013-07-17(R1.0)
2.14.13 Real Time Uplink Load Medium Threshold ..........................................2-548

2.14.14 Real Time Uplink Load High Threshold ...............................................2-549
2.14.15 Real Time Downlink Load Low Threshold............................................2-550
2.14.16 Real Time Downlink Load Medium Threshold ......................................2-551
2.14.17 Real Time Downlink Load High Threshold ...........................................2-552
2.14.18 Not Real Time Uplink Load Low Threshold ..........................................2-553
2.14.19 Not Real Time Uplink Load Medium Threshold ....................................2-554
2.14.20 Not Real Time Uplink Load High Threshold .........................................2-555
2.14.21 Not Real Time Downlink Load Low Threshold......................................2-556
2.14.22 Not Real Time Downlink Load Medium Threshold ................................2-557
2.14.23 Not Real Time Downlink Load High Threshold .....................................2-558
2.15 External UTRAN TDD Cell CRRM Configuration (GCrrmNCellLdTDDLcr) .........2-559
2.15.1 External UTRAN TDD Cell CRRM ID ....................................................2-559
2.15.2 Cs Remained User Num Low Threshold ...............................................2-560
2.15.3 Ps Remained User Num Low Threshold................................................2-561
2.15.4 Cs Remained User Num Medium Threshold..........................................2-562
2.15.5 Ps Remained User Num Medium Threshold..........................................2-563
2.15.6 Uplink Load Low Threshold ..................................................................2-564
2.15.7 Uplink Load Medium Threshold ............................................................2-565
2.15.8 Uplink Load High Threshold .................................................................2-566
2.15.9 Downlink Load Low Threshold..............................................................2-567
2.15.14 Real Time Uplink Load High Threshold ...............................................2-572
2.15.15 Real Time Downlink Load Low Threshold............................................2-573
2.15.16 Real Time Downlink Load Medium Threshold ......................................2-574
2.15.17 Real Time Downlink Load High Threshold ...........................................2-575
2.15.18 Not Real Time Uplink Load Low Threshold ..........................................2-576
2.15.19 Not Real Time Uplink Load Medium Threshold ....................................2-577
2.15.20 Not Real Time Uplink Load High Threshold .........................................2-578
2.15.21 Not Real Time Downlink Load Low Threshold......................................2-579
2.15.22 Not Real Time Downlink Load Medium Threshold ................................2-580
2.15.23 Not Real Time Downlink Load High Threshold .....................................2-581
2.16 External E-UTRAN TDD Cell Configuration (GExternalEutranCellTDD).............2-582
2.16.1 External E-UTRAN TDD Cell Configuration ID .......................................2-582
XVI
SJ-20130408140048-016|2013-07-17(R1.0)
2.16.2 MCC...................................................................................................2-583
2.16.3 MNC...................................................................................................2-584
2.16.4 EUTRAN NODEB Identification ............................................................2-585
2.16.5 Physical layer cell identity of LTE CELL.................................................2-586
2.16.6 specified EARFCN of E-UTRAN cells ...................................................2-587
2.16.7 Tracking area code ..............................................................................2-588
2.16.8 The attribute of LTE NodeB ..................................................................2-589
2.16.9 the minimum value of the channel bandwidth ........................................2-590
2.16.10 EUTRAN CELL Identification..............................................................2-591
2.17 GSM Cell Configuration (GGsmCell)...............................................................2-592
2.17.1 GSM Cell Configuration ID ...................................................................2-592
2.17.2 CI .......................................................................................................2-593
2.17.3 NCC ...................................................................................................2-593
2.17.4 BCC ...................................................................................................2-594
2.17.5 TSC....................................................................................................2-596
2.17.6 MIN received signal level to access ......................................................2-597
2.17.7 Control channel MAX power level .........................................................2-598
2.17.8 NCC permitted ....................................................................................2-600
2.17.9 GPLMN DN.........................................................................................2-601
2.17.10 LocationArea DN ...............................................................................2-602
2.17.11 Cell Sequence ...................................................................................2-603
2.17.12 BCCH arfcn.......................................................................................2-604
2.17.13 Common control channel configuration ...............................................2-604
2.17.14 PS Support .......................................................................................2-606
2.17.15 GRoutingArea DN..............................................................................2-607
2.17.16 Number of blocks reserved for AGCH .................................................2-608
2.17.17 Number of multi-frames of the PCH ....................................................2-609
2.17.18 Early class-mark sending control ........................................................ 2-611
2.17.19 CBC support .....................................................................................2-612
2.17.20 FreqBand..........................................................................................2-613
2.17.21 Cell type ...........................................................................................2-614
2.17.22 MAX number of re-transmitting events times .......................................2-615
2.17.23 Number of slots to spread transmission...............................................2-617
2.17.24 Cell bar qualify ..................................................................................2-618
2.17.25 Cell bar access..................................................................................2-620
2.17.26 Call re-establishment allowed .............................................................2-621
2.17.27 Emergency call allowed .....................................................................2-622
XVII
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.28 Access Control ..................................................................................2-623

2.17.29 Uplink discontinuous transmission ......................................................2-624
2.17.30 Protection period for access attempt ...................................................2-626
2.17.31 Multi-band report indication ................................................................2-627
2.17.32 Redirection enable.............................................................................2-629
2.17.33 Outer redirection enable.....................................................................2-630
2.17.34 Downlink discontinuous transmission allowed......................................2-631
2.17.35 SI13 sending position.........................................................................2-632
2.17.36 Queue allowed when assign...............................................................2-633
2.17.37 Forced release indicate when assign ..................................................2-635
2.17.38 Forced handover indication for assign.................................................2-636
2.17.39 Queue allowed when handover ..........................................................2-637
2.17.40 Forced release indicate when handover ..............................................2-638
2.17.41 Forced handover indication for handover.............................................2-639
2.17.42 Cipher mode priority 1........................................................................2-641
2.17.49 Preprocessing indication ....................................................................2-649
2.17.50 Fast average indication ......................................................................2-651
2.17.51 Allowed FACCH call setup after emergency call...................................2-652
2.17.52 Allowed FACCH call setup when page respond ...................................2-653
2.17.53 Allowed call setup on FACCH .............................................................2-654
2.17.54 Allowed call reestablished on FACCH .................................................2-655
2.17.55 Minimal resource threshold ................................................................2-656
2.17.56 PCH load indication period .................................................................2-657
2.17.57 CCCH load indication (RACH) ............................................................2-658
2.17.58 CCCH load indication (PCH) ..............................................................2-659
2.17.59 Interference average period ...............................................................2-660
2.17.60 Interference Band Boundary...............................................................2-661
2.17.61 MAX resending times for physical information......................................2-662
2.17.62 RACH load indication period...............................................................2-663
2.17.63 Average bursts count surveyed by RACH............................................2-664
2.17.64 RACH receiving signal level threshold for busy burst............................2-665
XVIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.65 Times of N200 for SDCCH .................................................................2-666

2.17.66 Times of N200 for FACCH_F ..............................................................2-667
2.17.67 Times of N200 for FACCH_H..............................................................2-668
2.17.68 Times of N200 for SACCH .................................................................2-669
2.17.69 Times of N200 for establish ................................................................2-670
2.17.70 Times of N200 for Release .................................................................2-671
2.17.71 Interval of SDCCH re-sending PHY info message................................2-672
2.17.72 Interval of TCH re-sending PHY info message.....................................2-673
2.17.73 TA Max .............................................................................................2-675
2.17.74 TA allowed ........................................................................................2-676
2.17.75 Allow SOLSA MS to access ...............................................................2-677
2.17.76 Repeated ACCH support....................................................................2-678
2.17.77 Frequency offset correct support ........................................................2-679
2.17.78 Maximum power on handover command support .................................2-680
2.17.79 Coefficient of Bvc bucket size .............................................................2-681
2.17.80 TA MIN .............................................................................................2-682
2.17.81 8PSK modulating power attenuation level ...........................................2-683
2.17.82 Access class parameter config select..................................................2-684
2.17.83 Cell access control support ................................................................2-685
2.17.84 Support NCell of Channel Release .....................................................2-686
2.17.85 Strategy for E-Utran Neighbour Select When Release .........................2-687
2.17.86 E-Utran FDD and TDD Prio When Release .........................................2-688
2.17.87 Support Emergency call preemption ...................................................2-689
2.17.88 BA show ...........................................................................................2-691
2.17.89 Support CS paging prefer PS Assignment ...........................................2-692
2.17.90 Channel Select Strategy ....................................................................2-693
2.17.91 EMLPP channel reserved rate ............................................................2-694
2.17.92 Use cell EMLPP Threshold.................................................................2-695
2.17.93 Dynamic HR support indication...........................................................2-696
2.17.94 Threshold of AMR HR........................................................................2-697
2.17.95 Threshold for FR to HR ......................................................................2-698
2.17.96 Dynamic HR channel allocation algorithm ...........................................2-699
2.17.97 HR channel fragment finishing support................................................2-701
2.17.98 Busy threshold for HR defrag .............................................................2-702
2.17.99 Idle FR threshold For HR defrag .........................................................2-703
2.17.100 HR channel percentage threshold .....................................................2-704
2.17.101 If support allocating channel by TA....................................................2-705
XIX
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.102 The TA threshold of allocating channel in BCCH ................................2-706

2.17.103 Support dynamic channel move ........................................................2-707
2.17.104 Idle static TCH threshold for dynamic channel move ..........................2-708
2.17.105 UpLink Optimize Method for Assignment or Intracell Handover ...........2-709
2.17.106 DownLink Optimize Method for Assignment or Intracell Handover.......2-710
2.17.107 UpLink Optimize Method for Intercell Handover ................................. 2-711
2.17.108 DownLink Optimize Method for Intercell Handover .............................2-712
2.17.109 UpLink Optimize Method for Immediate Assignment ..........................2-713
2.17.110 DownLink Optimize Method for Immediate Assignment ......................2-714
2.17.111 Uplink target level.............................................................................2-715
2.17.112 Downlink target level ........................................................................2-716
2.17.113 Low RSSI threshold .........................................................................2-717
2.17.114 High RSSI Threshold .......................................................................2-719
2.17.115 Ms power inherit threshold................................................................2-720
2.17.116 Additional reselection parameter indication(SI4).................................2-721
2.17.117 Cell reselection parameter indication .................................................2-722
2.17.118 Cell reselection offset .......................................................................2-724
2.17.119 Temporary offset ..............................................................................2-725
2.17.120 Penalty time ....................................................................................2-727
2.17.121 Cell reselecting hysteresis level ........................................................2-728
2.17.122 New setup cause indication ..............................................................2-729
2.17.123 Power offset indication .....................................................................2-730
2.17.124 Power offset ....................................................................................2-732
2.17.125 Priority threshold..............................................................................2-733
2.17.126 LSA Offset ......................................................................................2-734
2.17.127 Additional reselection parameter indicator(SI3) ..................................2-734
2.17.128 MAX value of MS Radio link timeout .................................................2-736
2.17.129 Radio link failure criterion .................................................................2-737
2.17.130 MAX value of BSS Radio link timeout................................................2-738
2.17.131 Receiving level threshold..................................................................2-740
2.17.132 Receiving quality threshold...............................................................2-741
2.17.133 Radio link failure checking period......................................................2-742
2.17.134 BCCH switch allowed.......................................................................2-743
2.17.135 Dynamic configuration SDCCH.........................................................2-744
2.17.136 Baseband frequency hopping TRX exchange support ........................2-745
2.17.137 Start PA power off............................................................................2-746
2.17.138 Switch flag of cell TRX power off.......................................................2-747
XX
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.139 Start PA output voltage tuning...........................................................2-748

2.17.140 Enable RRU of cell power off............................................................2-749
2.17.141 The switch of CIR report...................................................................2-750
2.17.142 The L2 frame of Lapdm fill random value...........................................2-751
2.17.143 MR Report Time Bmp ......................................................................2-752
2.17.144 Support intelligent cell shutting down ................................................2-753
2.17.145 Upper GGsmCell DN .......................................................................2-754
2.17.146 Mobile Originated Short Message Intercept .......................................2-755
2.17.147 Mobile Terminated Short Message Intercept ......................................2-756
2.17.148 Diversity Combine Mode ..................................................................2-757
2.17.149 Joint Source-Controlled Channel Decoding Switch.............................2-758
2.17.150 Joint Source-Controlled Channel Decoding .......................................2-759
2.17.151 IBS time bitmap ...............................................................................2-760
2.17.152 Cell shuttingdown based on traffic load .............................................2-761
2.17.153 Support implicit reject in assignment .................................................2-762
2.17.154 Implicit reject CS and PS..................................................................2-763
2.17.155 Support broadcasting EAB ...............................................................2-764
2.17.156 EAB Subcategory ............................................................................2-765
2.17.157 EAB Authorization Mask...................................................................2-766
2.17.158 EAB Position ...................................................................................2-767
2.17.159 NCC Config Parameter ....................................................................2-768
2.17.160 RxQual Threshlod............................................................................2-769
2.17.161 TCH Allocation Threshold For Dual-Frequency Network .....................2-770
2.17.162 Um soft Synchronous Support ..........................................................2-771
2.17.163 Is Enhanced Dual-Frequency Network Support..................................2-772
2.17.164 SubCell Channel Allocation Control...................................................2-773
2.17.165 Use Uniform Power Control .............................................................2-774
2.17.166 Longitude ........................................................................................2-775
2.17.167 Latitude...........................................................................................2-776
2.17.168 Altitude ...........................................................................................2-777
2.17.169 Offset Angle ....................................................................................2-778
2.17.170 Site location ....................................................................................2-779
2.17.171 Immediate assignment maximum delay times ...................................2-780
2.17.172 Filter Exceed Traffic threshold NCell .................................................2-781
2.17.173 Emergency Handover use Dynamic Priority .......................................2-781
2.17.174 Assign strategy for Cobcch...............................................................2-782
2.17.175 Arf power reduce function switch ......................................................2-784
XXI
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.176 SupportBtsBcchExchg .....................................................................2-785

2.17.177 Stop power Reduce Level Threshold.................................................2-786
2.17.178 Reduce Power Step .........................................................................2-787
2.17.179 Reduce Power Arfcn ........................................................................2-787
2.17.180 Prom power step .............................................................................2-788
2.17.181 Non Emergency Handover use Dynamic Priority................................2-789
2.17.182 Immediate assignment occupy PCH option........................................2-790
2.17.183 Dynamic Priority NCell Traffic Threshold ...........................................2-791
2.18 Cell Precise Paging Configuration (GCellPrecisePaging) .................................2-792
2.18.1 Cell Precise Paging Configuration ID ....................................................2-792
2.18.2 Adopt Precise Paging for Circuit Switched Service.................................2-793
2.18.3 Adopt Precise Paging for Packet Switched Service................................2-794
2.18.4 VPC Age Time ....................................................................................2-795
2.18.5 Paging Hole Timer...............................................................................2-796
2.19 Location Area (GLocationArea) ......................................................................2-797
2.19.1 Location Area ID .................................................................................2-797
2.19.2 LAC....................................................................................................2-798
2.19.3 IMSI attach/detach allowed ..................................................................2-799
2.19.4 Periodical location updating timer .........................................................2-800
2.20 Routing Area (GRoutingArea).........................................................................2-802
2.20.1 Routing Area ID...................................................................................2-802
2.20.2 RAC ...................................................................................................2-803
2.21 AMR Configuration (GCellAmr).......................................................................2-804
2.21.1 AMR Configuration ID ..........................................................................2-804
2.21.2 Support AMR Codec............................................................................2-805
2.21.3 Use cell AMR parameter ......................................................................2-806
2.21.4 AMR full Active Codec Set(4.75kbps) ...................................................2-807
2.21.5 AMR full Active Codec Set(5.15kbps) ...................................................2-808
2.21.6 AMR full Active Codec Set(5.9kbps) .....................................................2-809
2.21.9 AMR full Active Codec Set(7.95kbps) ................................................... 2-811
2.21.10 AMR full Active Codec Set(10.2kbps)..................................................2-812
2.21.11 AMR full Active Codec Set(12.2kbps)..................................................2-813
2.21.12 AMR Half Active Codec Set(4.75kbps) ................................................2-814
2.21.14 AMR Half Active Codec Set(5.9kbps)..................................................2-816
XXII
SJ-20130408140048-016|2013-07-17(R1.0)

2.21.25 Thresholds of AMR HR 1 ...................................................................2-828
2.21.30 Hysteresis of AMR FR 1.....................................................................2-834
2.21.42 Enable AMR FR noise control.............................................................2-848
2.21.43 AMR FR Initial codec mode ................................................................2-849
2.21.44 AMR FR Start mode ..........................................................................2-851
2.21.45 Enable AMR HR noise control ............................................................2-852
2.21.46 AMR HR Initial codec mode ...............................................................2-853
2.21.47 AMR HR Start mode ..........................................................................2-854
2.21.48 AMR codec adjust mode ....................................................................2-855
2.21.49 AMR codec adjust interval..................................................................2-856
2.21.50 BSS radio link timer's max value for AMR FR ......................................2-857
2.21.51 BSS radio link timer's max value for AMR HR ......................................2-859
XXIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.21.52
MAX value of MS Radio link
timeout for AMR FR
...........................................................................................................2-860
2.21.53
timeout for AMR HR
...........................................................................................................2-862
2.21.54 Support AMR-WB Codec ...................................................................2-864
2.21.71
timeout for AMR WFS
...........................................................................................................2-884
2.21.72
timeout for AMR-WB OWFS
...........................................................................................................2-886
2.21.73
timeout for AMR-WB OWHS
XXIV
SJ-20130408140048-016|2013-07-17(R1.0)
...........................................................................................................2-888
2.21.74 BSS radio link timers max value for FR-AMR-WB ...............................2-889
2.21.75 BSS radio link timer's max value for OFR-AMR-WB .............................2-891
2.21.76 BSS radio link timer's max value for AMR OWHR ................................2-892
2.22 Frequency Hopping System (GHoppingFrequency) .........................................2-894
2.22.1 Frequency Hopping System ID .............................................................2-894
2.22.2 FhsID .................................................................................................2-894
2.22.3 Hopping sequence No. ........................................................................2-895
2.22.4 MA Frequency List ..............................................................................2-897
2.23 Baseband Hopping System (GHoppingBaseband)...........................................2-898
2.23.1 Baseband Hopping System ID..............................................................2-898
2.23.2 FhsID .................................................................................................2-899
2.23.3 Hopping sequence No. ........................................................................2-899
2.23.4 MA Frequency List ..............................................................................2-901
2.24 Handover Control (GHandoverControl) ...........................................................2-902
2.24.1 Handover Control ID ............................................................................2-902
2.24.2 Uplink power level Sample count ..........................................................2-903
2.24.3 Uplink level Weight ..............................................................................2-904
2.24.4 Downlink power level Sample count......................................................2-905
2.24.5 Downlink level Weight..........................................................................2-906
2.24.6 Uplink quality Sample count .................................................................2-907
2.24.7 Uplink quality Weight ...........................................................................2-909
2.24.8 Downlink quality Sample count .............................................................2-910
2.24.9 Downlink quality Weight ....................................................................... 2-911
2.24.10 Distance ...........................................................................................2-912
2.24.11 Neighboring cell.................................................................................2-914
2.24.12 Number of zero allowed in AV.............................................................2-915
2.24.13 MIN interval between inter-cell handover.............................................2-916
2.24.14 Max time advance threshold between MS and BTS .............................2-917
2.24.15 Uplink receive level Threshold ............................................................2-919
2.24.16 Downlink receive level Threshold........................................................2-921
2.24.17 Uplink receive quality Threshold .........................................................2-924
2.24.18 Downlink receive quality Threshold .....................................................2-925
2.24.19 Uplink receive level of intra-ho Threshold ............................................2-926
2.24.20 Downlink receive level of intra-ho Threshold........................................2-929
2.24.21 Uplink receive level Value P ...............................................................2-931
2.24.22 Uplink receive level Value N ...............................................................2-933
XXV
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.23 Downlink receive level Value P ...........................................................2-934

2.24.24 Downlink receive level Value N ...........................................................2-935
2.24.25 Uplink receive quality Value P.............................................................2-936
2.24.26 Uplink receive quality Value N ............................................................2-938
2.24.27 Downlink receive quality Value P ........................................................2-939
2.24.28 Downlink receive quality Value N ........................................................2-940
2.24.29 Uplink receive level of intra-ho Value P ...............................................2-941
2.24.30 Uplink receive level of intra-ho Value N ...............................................2-942
2.24.31 Downlink receive level of intra-ho Value P ...........................................2-944
2.24.32 Downlink receive level of intra-ho Value N ...........................................2-945
2.24.33 Distance handover Value P ................................................................2-946
2.24.34 Distance handover Value N ................................................................2-947
2.24.35 PBGT handover Value P ....................................................................2-948
2.24.36 PBGT handover Value N ....................................................................2-949
2.24.37 Allow intra-Cell handover attempt due to uplink interference(High
Speed) ................................................................................................2-950
2.24.38 Allow intra-Cell handover attempt due to downlink interference(High
Speed) ................................................................................................2-951
2.24.39 Allow handover due to distance(High Speed) ......................................2-952
2.24.40 Allow standard PBGT handover(High Speed) ......................................2-953
2.24.41 Allow automatic handover due to traffic(High Speed) ...........................2-954
2.24.42 Allow intra-cell handover in super TRX channel due to downlink
interference(High Speed)......................................................................2-955
2.24.43 Allow intra-cell handover in super TRX channel due to uplink
interference(High Speed)......................................................................2-956
2.24.44 Allow adjacent cells handover in super TRX channel due to PBGT(High
Speed) ................................................................................................2-957
2.24.45 Allow rapid handover(High Speed)......................................................2-958
2.24.46 Allow Macro-Micro delay handover(High Speed)..................................2-959
2.24.47 Allow Micro-Micro delay handover(High Speed)...................................2-960
2.24.48 Allow force transfer handover(High Speed) .........................................2-961
2.24.49 Allow quality handover in uplink(High Speed) ......................................2-962
2.24.50 Allow level handover in uplink(High Speed) .........................................2-962
2.24.51 Allow quality handover in downlink(High Speed) ..................................2-963
2.24.52 Allow level handover in downlink(High Speed).....................................2-964
2.24.53 Allow downlink rapid handover(High Speed)........................................2-965
2.24.54 Allow C/I limited handover(High Speed) ..............................................2-966
2.24.55 Allow downlink quality rapid handover(High Speed) .............................2-967
XXVI
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.56 Allow intra-Cell handover attempt due to uplink interference(Middle

Speed) ................................................................................................2-969
2.24.57 Allow intra-Cell handover attempt due to downlink interference(Middle
Speed) ................................................................................................2-970
2.24.58 Allow handover due to distance(Middle Speed) ...................................2-971
2.24.59 Allow standard PBGT handover(Middle Speed) ...................................2-971
2.24.60 Allow automatic handover due to traffic(Middle Speed) ........................2-972
interference(Middle Speed)...................................................................2-973
interference(Middle Speed)...................................................................2-974
2.24.63 Allow adjacent cells handover in super TRX channel due to
PBGT(Middle Speed) ...........................................................................2-975
2.24.64 Allow rapid handover(Middle Speed)...................................................2-976
2.24.65 Allow Macro-Micro delay handover(Middle Speed)...............................2-977
2.24.66 Allow Micro-Micro delay handover(Middle Speed)................................2-978
2.24.67 Allow force transfer handover(Middle Speed) ......................................2-979
2.24.68 Allow quality handover in uplink(Middle Speed) ...................................2-980
2.24.69 Allow level handover in uplink(Middle Speed) ......................................2-981
2.24.70 Allow quality handover in downlink(Middle Speed) ...............................2-982
2.24.71 Allow level handover in downlink(Middle Speed)..................................2-983
2.24.72 Allow downlink rapid handover(Middle Speed).....................................2-984
2.24.73 Allow C/I limited handover(Middle Speed) ...........................................2-985
2.24.74 Allow downlink quality rapid handover(Middle Speed) ..........................2-986
2.24.75 Allow intra-Cell handover attempt due to uplink interference(Low
Speed) ................................................................................................2-987
2.24.76 Allow intra-Cell handover attempt due to downlink interference(Low
Speed) ................................................................................................2-988
2.24.77 Allow handover due to distance(Low Speed) .......................................2-989
2.24.78 Allow standard PBGT handover(Low Speed).......................................2-990
2.24.79 Allow automatic handover due to traffic(Low Speed) ............................2-991
interference(Low Speed) ......................................................................2-992
interference(Low Speed) ......................................................................2-993
2.24.82 Allow adjacent cells handover in super TRX channel due to PBGT(Low
Speed) ................................................................................................2-994
2.24.83 Allow dynamic adjustment of handover priority ....................................2-995
2.24.84 Allow rapid handover(Low Speed) ......................................................2-996
XXVII
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.85 Allow Macro-Micro delay handover(Low Speed) ..................................2-997

2.24.86 Allow Micro-Micro delay handover(Low Speed)....................................2-998
2.24.87 Allow force transfer handover(Low Speed) ..........................................2-999
2.24.88 Allow quality handover in uplink(Low Speed) .....................................2-1000
2.24.89 Allow level handover in uplink(Low Speed)........................................2-1000
2.24.90 Allow quality handover in downlink(Low Speed).................................2-1001
2.24.91 Allow level handover in downlink(Low Speed)....................................2-1002
2.24.92 Allow downlink rapid handover(Low Speed) ......................................2-1003
2.24.93 Allow C/I limited handover(Low Speed) .............................................2-1004
2.24.94 Allow downlink quality rapid handover(Low Speed) ............................2-1005
2.24.95 Synchronism ...................................................................................2-1006
2.24.96 Asynchronism .................................................................................2-1007
2.24.97 Pseudo-synchronism .......................................................................2-1008
2.24.98 Pre-synchronism .............................................................................2-1009
2.24.99 Prior layer selecting parameter on signal level/quality ........................2-1010
2.24.100 Rapid handover Threshold .............................................................2-1012
2.24.101 Rapid handover Value N ................................................................2-1014
2.24.102 Handover to same layer other band neighbour cell for PBGT
permitted ...........................................................................................2-1015
2.24.103 Handover to neighbour cell with no Layer Relation for PBGT
permitted ...........................................................................................2-1016
2.24.104 Handover to upper layer neighbour cell for PBGT permitted .............2-1017
2.24.105 Handover to under layer neighbor cell for PBGT permitted ...............2-1018
2.24.106 Penalty time for handover failure.....................................................2-1019
2.24.107 Difference of dynamic priority .........................................................2-1020
2.24.108 PBGT difference ............................................................................2-1021
2.24.109 Same layer permitted on traffic HO .................................................2-1022
2.24.110 Upper layer permitted on traffic HO .................................................2-1023
2.24.111 Lower layer permitted on traffic HO .................................................2-1024
2.24.112 Undefined layer permitted on traffic HO ...........................................2-1025
2.24.113
GSM900 frequency band P-GSM
permitted on traffic HO
.........................................................................................................2-1026
2.24.114 EXT900 frequency band E-GSM permitted on traffic HO...................2-1027
2.24.115 DCS1800 frequency band permitted on traffic HO ............................2-1028
2.24.116 PCS1900 frequency band permitted on traffic HO ............................2-1029
XXVIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.117 GSM850 frequency band permitted on traffic HO .............................2-1030

2.24.118 Threshold of traffic for handover......................................................2-1031
2.24.119 Traffic handover threshold ..............................................................2-1032
2.24.120 Level offset during penalty..............................................................2-1033
2.24.121 Uplink interference quality offset .....................................................2-1034
2.24.122 Uplink interference level offset ........................................................2-1036
2.24.123 Downlink interference quality offset .................................................2-1037
2.24.124 Downlink interference level offset....................................................2-1038
2.24.125 Invalid intra-handover time .............................................................2-1040
2.24.126 MAX count of invalid intra-handover................................................2-1041
2.24.127 MAX path loss threshold on force handover.....................................2-1042
2.24.128 MAX time advance threshold on force handover ..............................2-1044
2.24.129 N value of force handover ..............................................................2-1045
2.24.130 P value of force handover...............................................................2-1047
2.24.131 Level offset for PBGT to up layer ....................................................2-1048
2.24.132 Level offset for PBGT to low layer ...................................................2-1049
2.24.133 Lag time for PBGT between different layers.....................................2-1051
2.24.134 The threshold for starting PBGT handover.......................................2-1052
2.24.135 The priority of the handover from Macro cell to Micro cell .................2-1053
2.24.136 Handover from macro to micro........................................................2-1054
2.24.137 Hysteresis timer when traffic handover ............................................2-1055
2.24.138 Downlink rapid handover offset of high speed ..................................2-1055
2.24.139 Downlink rapid handover offset of middle speed ..............................2-1057
2.24.140 Downlink rapid handover offset of low speed ...................................2-1058
2.24.141 Handover back penalty ..................................................................2-1059
2.24.142 MIN interval between inter-cell emergency handover .......................2-1060
2.24.143 Handover back penalty after emergency handover...........................2-1061
2.24.144 Neighbour cell for emergency handover ..........................................2-1062
2.24.145 Downlink rapid quality drop THS ....................................................2-1063
2.24.146 Downlink rapid quality drop Value N ................................................2-1064
2.24.147 Quality weight of recent measure value ...........................................2-1065
2.24.148 Level weight of recent measurement value level ..............................2-1066
2.24.149 The load of HO from FR to HR(V3) .................................................2-1067
2.24.150 The load of HO from FR to HR(V1) .................................................2-1068
2.24.151 The quality of HO from FR to HR ....................................................2-1070
2.24.152 The quality of HO from HR(V1) to FR ..............................................2-1071
2.24.153 The quality of HO from HR(V3) to FR ..............................................2-1072
XXIX
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.154 P value of load and quality handover...............................................2-1073

2.24.155 N value of load and quality handover ..............................................2-1074
2.24.156
Penalty time for handover caused
by interference
.........................................................................................................2-1076
2.24.157 Interference band requirement for intracell handover caused by
interference .......................................................................................2-1077
2.24.158 Prefer layer for traffic handover.......................................................2-1078
2.24.159 PBGT offset of prefer layer for traffic handover ................................2-1079
2.24.160 Prefer band for traffic handover ......................................................2-1080
2.24.161 PBGT offset of prefer band for traffic handover ................................2-1081
2.24.162 The threshold for starting Downlink Rapid handover.........................2-1082
2.24.163 High speed threshold .....................................................................2-1083
2.24.164 Middle speed threshold ..................................................................2-1084
2.24.165 The minimum interval of direction handover.....................................2-1085
2.24.166 The ncell offset for downlink rapid handover ....................................2-1086
2.24.167 The offset of ncell in the same direction...........................................2-1087
2.24.168 Allow signal quality handover on TCH(High speed) ..........................2-1088
2.24.169 Allow signal quality handover on TCH(Middle speed) .......................2-1089
2.24.170 Allow signal quality handover on TCH(Low speed)...........................2-1090
2.24.171 Handover Threshole of Mean Bit Error Probability on TCH ...............2-1091
2.24.172 Handover P Number of Mean Bit Error Probability on TCH ...............2-1091
2.24.173 Handover N Number of Mean Bit Error Probability on TCH ...............2-1092
2.24.174 Handover Threshole of CV Bit Error Probability on TCH ...................2-1093
2.24.175 Handover P Number of CV Bit Error Probability on TCH ...................2-1094
2.24.176 Handover N Number of CV Bit Error Probability on TCH...................2-1095
2.24.177 If support intra-handover from FR to HR due to high load .................2-1096
2.24.178 If support intra-handover from HR to FR due to bad quality...............2-1097
2.24.179 Is Dual-Frequency Traffic Handover Support ...................................2-1098
2.24.180 Dual-Frequency Handover Parameter N..........................................2-1099
2.24.181 Dual-Frequency Handover Parameter P.......................................... 2-1100
2.24.182 Dual-Frequency Handover TA Threshold......................................... 2-1101
2.24.183 Dual-Frequency Handover RxLevel Threshold................................. 2-1101
2.24.184 Circuit data handover control .......................................................... 2-1102
2.24.185 Back to Source Cell when PBGT Handover ..................................... 2-1103
2.24.186
XXX
SJ-20130408140048-016|2013-07-17(R1.0)
Back to Source Cell when Other

Handover
......................................................................................................... 2-1104
2.24.187 HoAccess Require Rxlevel offset .................................................... 2-1105
2.24.188
HoAccess Require Rxlevel Select
Strategy when Other Handover
......................................................................................................... 2-1106
2.24.189 Dual-Frequency Traffic Handover Threshold.................................... 2-1107
2.24.190 Support handover from HR to FR due to low load ............................ 2-1108
2.24.191 The load of HO from HRV1 to FR ............................................ 2-1109
2.24.192 The load of HO from HRV3 to FR ............................................ 2-1110
2.24.193 HR to FR handover downlink level start threshold ............................ 2-1111
2.24.194 FR to HR handover downlink level start threshold ............................ 2-1112
2.24.195 Back to Source Cell when MSC Controlled Incoming Handover ........ 2-1113
2.24.196 Good level and bad quality handover DL Level ................................ 2-1114
2.24.197 HoAccess Require CI .................................................................... 2-1115
2.24.198 Good level and bad quality handover enable ................................... 2-1116
2.24.199 Penalty time for inter-subcell handover failure.................................. 2-1117
2.25 SDCCH Handover Control (GSdHandoverControl) ........................................ 2-1118
2.25.1 SDCCH Handover Control ID ............................................................. 2-1118
2.25.2 Allow Distance SDCCH handover(High Speed) ................................... 2-1119
2.25.3 Allow PBGT SDCCH handover(High Speed) ....................................... 2-1120
2.25.4 Allow rapid SDCCH handover(High Speed)......................................... 2-1121
2.25.5 Allow quality SDCCH handover in uplink(High Speed) ......................... 2-1122
2.25.6 Allow level SDCCH handover in uplink(High Speed) ............................ 2-1123
2.25.7 Allow quality SDCCH handover in downlink(High Speed) ..................... 2-1124
2.25.8 Allow level SDCCH handover in downlink(High Speed) ........................ 2-1125
2.25.9 Downlink rapid SDCCH handover enable(High Speed) ........................ 2-1126
2.25.10 Downlink rapid quality drop THS(High Speed) ................................... 2-1127
2.25.11 Allow Distance SDCCH handover(Middle Speed)............................... 2-1128
2.25.12 Allow PBGT SDCCH handover(Middle Speed) .................................. 2-1129
2.25.13 Allow rapid SDCCH handover(Middle Speed) .................................... 2-1130
2.25.14 Allow quality SDCCH handover in uplink(Middle Speed)..................... 2-1131
2.25.15 Allow level SDCCH handover in uplink(Middle Speed) ....................... 2-1132
2.25.16 Allow quality SDCCH handover in downlink(Middle Speed) ................ 2-1133
2.25.17 Allow level SDCCH handover in downlink(Middle Speed) ................... 2-1134
XXXI
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.18 Downlink rapid SDCCH handover enable(Middle Speed) ................... 2-1134

2.25.19 Downlink rapid quality drop THS(Middle Speed) ................................ 2-1135
2.25.20 Allow SDCCH handover ................................................................... 2-1137
2.25.21 Allow Distance SDCCH handover(Low Speed) .................................. 2-1137
2.25.22 Allow PBGT SDCCH handover(Low Speed) ...................................... 2-1138
2.25.23 Allow dynamic adjustment of SDCCH handover priority...................... 2-1139
2.25.24 Allow rapid SDCCH handover(Low Speed)........................................ 2-1140
2.25.25 Allow quality SDCCH handover in uplink(Low Speed) ........................ 2-1141
2.25.26 Allow level SDCCH handover in uplink(Low Speed) ........................... 2-1142
2.25.27 Allow quality SDCCH handover in downlink(Low Speed) .................... 2-1143
2.25.28 Allow level SDCCH handover in downlink(Low Speed)....................... 2-1144
2.25.29 Downlink rapid SDCCH handover enable(Low Speed) ....................... 2-1145
2.25.30 Downlink rapid quality drop THS(Low Speed) .................................... 2-1146
2.25.31 Perform PBGT SDCCH handover by Directed retry(Low Speed)......... 2-1148
2.25.32 Uplink power level Sample count ...................................................... 2-1149
2.25.33 Downlink power level Sample count.................................................. 2-1150
2.25.34 Uplink quality Sample count ............................................................. 2-1151
2.25.35 Downlink quality Sample count ......................................................... 2-1152
2.25.36 Distance ......................................................................................... 2-1154
2.25.37 Neighboring cell............................................................................... 2-1155
2.25.38 Number of zero allowed in AV........................................................... 2-1156
2.25.39 Uplink receive level Threshold .......................................................... 2-1157
2.25.40 Downlink receive level Threshold...................................................... 2-1160
2.25.41 Uplink receive quality Threshold ....................................................... 2-1163
2.25.42 Downlink receive quality Threshold ................................................... 2-1164
2.25.43 Uplink receive level Value P ............................................................. 2-1165
2.25.44 Uplink receive level Value N ............................................................. 2-1167
2.25.45 Downlink receive level Value P ......................................................... 2-1168
2.25.46 Downlink receive level Value N ......................................................... 2-1169
2.25.47 Uplink receive quality Value P........................................................... 2-1171
2.25.48 Uplink receive quality Value N .......................................................... 2-1172
2.25.49 Downlink receive quality Value P ...................................................... 2-1173
2.25.50 Downlink receive quality Value N ...................................................... 2-1174
2.25.51 Rapid handover Threshold ............................................................... 2-1176
2.25.52 Rapid handover Value N .................................................................. 2-1177
2.25.53 Max time advance threshold between MS and BTS ........................... 2-1178
2.25.54 Distance handover Value P .............................................................. 2-1179
XXXII
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.55 Distance handover Value N .............................................................. 2-1180

2.25.56 Downlink rapid handover offset of high speed.................................... 2-1182
2.25.57 Downlink rapid handover offset of middle speed ................................ 2-1183
2.25.58 Downlink rapid handover offset of low speed ..................................... 2-1184
2.25.59 PBGT handover Value P .................................................................. 2-1185
2.25.60 PBGT handover Value N .................................................................. 2-1186
2.25.61 Downlink rapid quality drop THS ...................................................... 2-1187
2.25.62 Downlink rapid quality drop Value N .................................................. 2-1188
2.25.63 Neighbour cell for emergency handover ............................................ 2-1189
2.25.64 Allow signal quality handover on SDCCH(High speed) ....................... 2-1190
2.25.65 Allow signal quality handover on SDCCH(Middle speed) .................... 2-1191
2.25.66 Allow signal quality handover on SDCCH(Low speed)........................ 2-1192
2.25.67 Handover Threshold of Mean Bit Error Probability on SDCCH ............ 2-1193
2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH................ 2-1194
2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH ............... 2-1195
2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH ................ 2-1196
2.25.71 Handover P Number of CV Bit Error Probability on SDCCH................ 2-1196
2.25.72 Handover N Number of CV Bit Error Probability on SDCCH................ 2-1197
2.25.73 Back to Source Cell when PBGT Handover ....................................... 2-1198
2.25.74
Handover
......................................................................................................... 2-1199
2.25.75 HoAccess Require Rxlevel offset ......................................................2-1200
2.25.76 HoAccess Require Rxlevel Select Strategy when Other Handover ......2-1201
2.25.77 Back to Source Cell when MSC Controlled Incoming Handover ..........2-1202
2.25.78 HoAccess Require CI.......................................................................2-1203
2.25.79 Good level and bad quality handover enable .....................................2-1204
2.25.80 Good level and bad quality handover DL Level ..................................2-1205
2.26 VAMOS Configuration (GVamos) ..................................................................2-1206
2.26.1 VAMOS Configuration ID ...................................................................2-1206
2.26.2 If support VAMOS..............................................................................2-1207
2.26.3 If support MUTE SAIC detection .........................................................2-1208
2.26.4 If support SAIC AFC detection............................................................2-1209
2.26.5 The priority level of VAMOS pairing ....................................................2-1210
2.26.6 The load of start VAMOS FR pairing ................................................... 2-1211
2.26.7 The load of start VAMOS HR pairing...................................................2-1212
XXXIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.26.8 Support VAMOS II .............................................................................2-1213

2.26.9 P value of MS capability predetect ......................................................2-1214
2.26.10 N value of pair-release uplink quality.................................................2-1215
2.26.11 N value of pair-release downlink quality.............................................2-1216
2.26.12 N value of MS capability predetect ....................................................2-1217
2.26.13 Low level threshold of MS capability detect .......................................2-1218
2.26.14 High level threshold of MS capability detect.......................................2-1218
2.26.15 Downlink receive quality of pair-release threshold..............................2-1220
2.26.16 AFC detect switch of MUTE SAIC.....................................................2-1220
2.26.17 Uplink receive quality of pair-release threshold ..................................2-1221
2.26.18 The period of SAIC AFC power control .............................................2-1222
2.26.19 The load of VAMOS pair release.......................................................2-1223
2.26.20 The level power control switch of MS capability detect .......................2-1224
2.26.21 The alpha value of SAIC AFC power control .....................................2-1225
2.26.22 Support pair release due to quality....................................................2-1226
2.26.23 Support handover from VAMOS FR to VAMOS HR ............................2-1227
2.26.24 SAIC AFC power control switch ........................................................2-1228
2.26.25 VAMOS Pair Selecting .....................................................................2-1229
2.26.26 P value of pair-release uplink quality .................................................2-1230
2.26.27 P value of pair-release downlink quality.............................................2-1231
2.26.28 The expected received level .............................................................2-1232
2.26.29 The level threshold of Vamos paring .................................................2-1232
2.26.30 N value of pair process ....................................................................2-1233
2.26.31 P value of pair process.....................................................................2-1234
2.26.32 The pass loss ratio of candidates......................................................2-1235
2.26.33 The quality threshold of Vamos paring...............................................2-1236
2.26.34 The downlink SCPIR threshold of MUTE SAIC MS ............................2-1237
2.26.35 The downlink SCPIR threshold of NON-SAIC MS ..............................2-1239
2.26.36 The downlink SCPIR threshold of SAIC MS.......................................2-1240
2.26.37 The downlink SCPIR threshold of SAIC AFC MS ...............................2-1241
2.26.38 The downlink SCPIR threshold of VAMOS I MS.................................2-1243
2.26.39 The downlink SCPIR threshold of VAMOS II MS ................................2-1244
2.26.40 The uplink SCPIR threshold .............................................................2-1245
2.27 UTRAN Measurement (GUtranMeasure).......................................................2-1247
2.27.1 UTRAN Measurement ID ...................................................................2-1247
2.27.2 Require UE to send UTRAN class-mark change message early ...........2-1248
2.27.3 Channel location of si2quater broadcast..............................................2-1249
XXXIV
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.4 CS measurement type reported by UE................................................2-1250

2.27.5 CS number of same frequency adjacent cells in report.........................2-1251
2.27.6 Measurement threshold of UE performing UTRAN cell reselection........2-1252
2.27.7 FDD reselection offset .......................................................................2-1253
2.27.8 Min Ec/No of UTRAN reselecting cell..................................................2-1254
2.27.9 Initial parameter instead of qsearch_c before UE receiving
qsearch_C.........................................................................................2-1255
2.27.10 Threshold when UE performs search under dedicated mode ..............2-1256
2.27.11 CS class of reported quantities of UTRAN adjacent cells ....................2-1257
2.27.12 Max number of UTRAN/FDD adjacent cells in measurement
report(CS) .........................................................................................2-1258
2.27.13 Measurement threshold of UE performing GPRS UTRAN
cell_0/Measurement threshold of UE performing_1 GPRS UTRAN
cell....................................................................................................2-1259
2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection offset_1 .......2-1261
2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection offset_1 .......2-1262
2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
reselecting cell_1 ...............................................................................2-1264
2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1 ................................2-1266
2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
reselecting cell_1 ...............................................................................2-1267
2.27.19 Measurement report threshold of Ec/No or RSCP(PS) .......................2-1268
2.27.20 CS measurement reporting rate of adjacent cell.................................2-1269
2.27.21 CS UE report invalid cell level allowed ..............................................2-1270
2.27.22 MulBndRprtCS ................................................................................2-1271
2.27.23 CS offset which is added when UE reports rxlev value .......................2-1272
2.27.24 GSM900M Adjacent cell reporting signal level Offset .........................2-1274
2.27.25 GSM900M Adjacent cell reporting signal level Threshold ...................2-1274
2.27.26 GSM1800M Adjacent cell reporting signal level Offset........................2-1275
2.27.27 GSM1800M Adjacent cell reporting signal level Threshold..................2-1276
2.27.28 GSM1900M Adjacent cell reporting signal level Offset........................2-1277
2.27.29 GSM1900M Adjacent cell reporting signal level Threshold..................2-1278
2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset ......................2-1279
2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold ................2-1280
2.27.32 Reporting threshold for the Ec/No or RSCP that is not reported ..........2-1281
2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame
indication...........................................................................................2-1283
2.27.34 GSM850M Adjacent cell reporting signal level Threshold ...................2-1284
2.27.35 GSM850M Adjacent cell reporting signal level Offset .........................2-1285
XXXV
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.36 TDD reselection offset .....................................................................2-1285

2.27.37 Max number of UTRAN/TDD adjacent cells in measurement
report(CS) .........................................................................................2-1286
2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset ......................2-1287
2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold ................2-1288
2.27.40 PS measurement type reported by UE ..............................................2-1289
2.27.41 PS number of same frequency adjacent cells in report ......................2-1291
2.27.42 PS class of reported quantities of UTRAN adjacent cells ....................2-1291
report(PS) .........................................................................................2-1292
2.27.44 PS measurement reporting rate of adjacent cell.................................2-1293
2.27.45 PS UE report invalid cell level allowed ..............................................2-1294
2.27.46 PS multi-band report indication .........................................................2-1295
2.27.47 PS offset which is added when UE reports RXLEV value ...................2-1297
2.27.48 GSM 900 Offset(PS) ........................................................................2-1299
2.27.49 GSM 900 Threshold(PS) ..................................................................2-1299
2.27.50 GSM 1800 Offset(PS) ......................................................................2-1300
2.27.51 GSM 1800 Threshold(PS) ................................................................2-1301
2.27.52 GSM 1900 Offset(PS) ......................................................................2-1302
2.27.53 GSM 1900 Threshold(PS) ................................................................2-1303
2.27.54 UTRAN/FDD Offset .........................................................................2-1304
2.27.55 UTRAN/FDD Threshold ...................................................................2-1305
2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame
indication...........................................................................................2-1306
2.27.57 GSM 850 Threshold(PS) ..................................................................2-1307
2.27.58 GSM 850 Offset(PS) ........................................................................2-1308
report(PS) .........................................................................................2-1309
2.27.60 UTRAN/TDD Offset ......................................................................... 2-1311
2.27.61 UTRAN/TDD Threshold ...................................................................2-1312
2.27.62 Reselect priority control of 2G/3G .....................................................2-1313
2.27.63 Max Number In Adjacent GSM cell ...................................................2-1314
2.27.64 A minimum threshold of RSCP for UTRAN FDD cell re-selection ........2-1315
2.27.65 Applies an offset to FDD_Qmin value................................................2-1316
2.27.66 Service UTRAN CCO support...........................................................2-1317
2.27.67 Signal strength and load and capacity priority ....................................2-1318
2.27.68 Signal strength threshold..................................................................2-1319
2.27.69 Load threshold ................................................................................2-1320
XXXVI
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.70 Available capacity threshold .............................................................2-1321

2.28 E-UTRAN Measurement (GEutranMeasure)..................................................2-1323
2.28.1 E-UTRAN Measurement ID ................................................................2-1323
qsearch_C.........................................................................................2-1324
2.28.3
Class of reported quantities of E-UTRAN adjacent cells
.........................................................................................................2-1325
2.28.4 Max number of E-UTRAN adjacent cells in measurement report...........2-1326
2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit.............2-1327
2.28.6 FDD Measurement report threshold of RSRQ or RSRP in 6-bit
reporting............................................................................................2-1328
2.28.7 TDD Measurement report threshold of RSRP or RSRQ in 6-bit
reporting............................................................................................2-1329
2.28.8 TDD Measurement report threshold of RSRQ or RSRP in 6-bit
reporting............................................................................................2-1330
2.28.9 FDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1331
2.28.10 FDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1332
2.28.11 TDD Measurement report threshold of RSRP or RSRQ in 3-bit
reporting............................................................................................2-1333
2.28.12 TDD Measurement report threshold of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1334
2.28.13 Measurement report threshold offset of RSRQ or RSRP in 3-bit
reporting............................................................................................2-1335
2.28.14 Measurement threshold of UE performing GPRS E-UTRAN Cell ........2-1336
2.28.15 GPRS max number of E-UTRAN adjacent cells in measurement
report ................................................................................................2-1337
2.28.16
GPRS class of reported quantities of E-UTRAN adjacent cells
.........................................................................................................2-1338
2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ ...........2-1339
2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP ...........2-1340
2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ ...........2-1341
2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP ...........2-1342
2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In
Dedicated Mode.................................................................................2-1343
XXXVII
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.22 Slippery window size for calculating average value of E-Utran

Neighbour Cell ..................................................................................2-1344
2.28.23 offset to the reported value when prioritizing the FDD E-UTRAN cells
for 6bit reporting.................................................................................2-1345
2.28.24 offset to the reported value when prioritizing the TDD E-UTRAN cells
for PS................................................................................................2-1349
for PS................................................................................................2-1350
2.28.29 offset to the reported value when prioritising the FDD E-UTRAN cells
for PS in packet tranfer mode .............................................................2-1351
2.28.30 GPRS FDD Measurement report threshold of RSRQ or RSRP in
packet tranfer mode ...........................................................................2-1352
2.28.31 GPRS FDD Measurement report threshold of RSRP or RSRQ in
2.28.32 GPRS max number of E-UTRAN adjacent cells in measurement report
in packet tranfer mode........................................................................2-1354
2.28.33 Measurement threshold of UE performing GPRS E-UTRAN Cell in
2.28.34 GPRS class of reported quantities of E-UTRAN adjacent cells in
2.28.35 offset to the reported value when prioritising the TDD E-UTRAN cells
for PS in packet tranfer mode .............................................................2-1357
2.28.36 GPRS TDD Measurement report threshold of RSRQ or RSRP in
2.28.37 GPRS TDD Measurement report threshold of RSRP or RSRQ in
2.29 UTRAN Handover Control (GUtranHandoverControl).....................................2-1360
2.29.1 UTRAN Handover Control ID .............................................................2-1360
2.29.2 Inter system handover supported........................................................2-1361
2.29.3 Punishment period of UTRAN cell when handover failure.....................2-1362
2.29.4 Slippery window size for calculating Ec/No or RSCP average value to
be zero..............................................................................................2-1363
2.29.5 Number that measurement value allowed to be zero............................2-1364
2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold ........................2-1366
XXXVIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.29.7 Handover from GSM to UTRAN FDD RSCP Value P ...........................2-1367

2.29.8 Handover from GSM to UTRAN FDD RSCP Value N ...........................2-1368
2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold ........................2-1369
2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P..........................2-1370
2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N..........................2-1371
2.29.12 Directed retry to UTRAN cell allowed ................................................2-1371
2.29.13 FDD/TDD handover .........................................................................2-1373
2.29.14 UTRAN handover ............................................................................2-1374
2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold ......................2-1375
2.29.16 Handover from GSM to UTRAN TDD RSCP Value N .........................2-1376
2.29.17 Handover from GSM to UTRAN TDD RSCP Value P .........................2-1377
2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing ..............................................................................................2-1378
2.29.19 Ec/No threshold when handover from GSM to 3G for load sharing ......2-1379
2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing ..............................................................................................2-1381
2.29.21 Penalty time of handover failure(PS) .................................................2-1382
2.29.22 Window of calculating 3G cell(PS) ....................................................2-1383
2.29.23 Support PS handover of Inter-System(PS) ........................................2-1384
2.29.24 Number of zero in measure result(PS) ..............................................2-1385
2.29.25 Priority to FDD or TDD(PS) ..............................................................2-1386
2.29.26 RSCP threshold to FDD in load handover(PS)...................................2-1387
2.29.27 Ec/No threshold to FDD in load handover(PS) ...................................2-1388
2.29.28 RSCP threshold to TDD in load handover(PS)...................................2-1389
2.29.29 RSCP threshold to FDD(PS) ............................................................2-1390
2.29.30 P of handovering to FDD by RSCP(PS) ............................................2-1391
2.29.31 N of handovering to FDD by RSCP(PS) ............................................2-1392
2.29.32 EcNo threshold to FDD(PS) .............................................................2-1393
2.29.33 P of handovering to FDD by EcNo(PS)..............................................2-1394
2.29.34 N of handovering to FDD by EcNo(PS) .............................................2-1395
2.29.35 RSCP threshold to TDD(PS) ............................................................2-1396
2.29.36 N of handovering to TDD by RSCP(PS) ............................................2-1397
2.29.37 P of handovering to TDD by RSCP ...................................................2-1398
2.29.38 2110~2170M frequency band permitted ............................................2-1399
2.29.39 925~960M frequency band permitted ................................................2-1400
2.29.40 869~894M frequency band permitted ................................................2-1401
2.29.41 Other Frequency band permitted(FDD) .............................................2-1402
XXXIX
SJ-20130408140048-016|2013-07-17(R1.0)

2.29.44 Other Frequency band permitted(TDD) .............................................2-1405
2.30 Site (GBtsSiteManager) ...............................................................................2-1406
2.30.1 Site ID ..............................................................................................2-1406
2.30.2 GBtsEquipment DN ...........................................................................2-1407
2.30.3 Config Paging Repeat Support ...........................................................2-1408
2.30.4 Inter SubCell handover permitted .......................................................2-1409
2.30.5 Support new abis ps message............................................................ 2-1411
2.30.6 The Abis band limit of HR priority........................................................ 2-1411
2.30.7 The Abis band of HO from FR to HR...................................................2-1412
2.30.8 Minimal number of idle E1 Abis Timeslot .............................................2-1413
2.30.9 Minimal of usable IP Abis bandwidth...................................................2-1414
2.30.10 the master power control option for Base Transceiver Station .............2-1415
2.30.11 the delay time of master power Off....................................................2-1416
2.30.12 the delay time of Transceivers Off.....................................................2-1417
2.30.13 the Percent for Transceivers Off .......................................................2-1418
2.30.14 the GNode id for master power control ..............................................2-1419
2.30.15 Benchmark Site ...............................................................................2-1420
2.31 Site baseband share Configuration (GSiteBaseBandShare) ...........................2-1421
2.31.1 Site baseband share Configuration ID.................................................2-1421
2.31.2 Baseband resource share support ......................................................2-1422
2.31.3 Traffic threshold for allocate baseband................................................2-1423
2.31.4 Traffic threshold for release baseband ................................................2-1424
2.31.5 Channel busy threshold for urgent allocate baseband ..........................2-1425
2.31.6 Channel busy threshold for urgent release baseband...........................2-1426
2.32 Bvc (GBvc) .................................................................................................2-1427
2.32.1 Bvc ID ..............................................................................................2-1427
2.32.2 BvcI..................................................................................................2-1427
2.32.3 FR NSE DN ......................................................................................2-1429
2.32.4 IP NSE DN........................................................................................2-1430
2.33 GPRS Configuration (GCellPs).....................................................................2-1430
2.33.1 GPRS Configuration ID......................................................................2-1430
2.33.2 T3168...............................................................................................2-1431
2.33.3 T3192...............................................................................................2-1433
2.33.4 T3193...............................................................................................2-1435
2.33.5 DRX mode holding timer ....................................................................2-1437
2.33.6 MAX blocks transmission in each TS ..................................................2-1438
XL
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.7 Packet control acknowledgement type ................................................2-1440

2.33.8 Access burst type ..............................................................................2-1441
2.33.9 N3102 decrease step.........................................................................2-1442
2.33.10 N3102 increase step ........................................................................2-1444
2.33.11 N3102 max......................................................................................2-1445
2.33.12 Route area color code......................................................................2-1446
2.33.13 Extended measurement report order.................................................2-1448
2.33.14 Network control order.......................................................................2-1449
2.33.15 CCCH SplitPGCycle support ............................................................2-1450
2.33.16 Packet access priority threshold .......................................................2-1451
2.33.17 Extended paging support .................................................................2-1452
2.33.18 USF granularity ...............................................................................2-1453
2.33.19 Cell support extended uplink TBF .....................................................2-1454
2.33.20 Extended uplink dynamic allocation support ......................................2-1455
2.33.21 Uplink delay time .............................................................................2-1456
2.33.22 Downlink delay time.........................................................................2-1457
2.33.23 Extended uplink TBF time ................................................................2-1458
2.33.24 RRBP Interval of GPRS downlink TBF ..............................................2-1459
2.33.25 Interval number of uplink GPRS TBF's ACK ......................................2-1460
2.33.26 Uplink measurement report period ....................................................2-1461
2.33.27 T3142 .............................................................................................2-1462
2.33.28 T3172 .............................................................................................2-1463
2.33.29 Max times of packet assignment resend............................................2-1464
2.33.30 Enable no data during extended uplink TBF mode .............................2-1466
2.33.31 Initial Coding Scheme of GPRS uplink TBF .......................................2-1467
2.33.32 Initial Coding Scheme of GPRS downlink TBF...................................2-1468
2.33.33 Maximum coding scheme of GPRS uplink TBF..................................2-1469
2.33.34 Maximum coding scheme of GPRS downlink TBF .............................2-1470
2.33.35 PS preemption support ....................................................................2-1471
2.33.36 PS queuing support .........................................................................2-1472
2.33.37 Resource adjust threshold................................................................2-1473
2.33.38 GDpiAppSrv DN ..............................................................................2-1474
2.33.39 Downlink TBF pre-establish support..................................................2-1475
2.33.40 PS channel alloc reduction support ...................................................2-1476
2.33.41 Initial limit threshold of PDTCH alloc .................................................2-1477
2.33.42 Medium limit threshold of PDTCH alloc .............................................2-1478
2.33.43 Maximum limit threshold of PDTCH alloc...........................................2-1479
XLI
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.44 Damping of PDTCH alloc from limit to non-limit..................................2-1480

2.33.45 GPRS phones init. Code can be changed .........................................2-1481
2.33.46 Maximal resource for POC service....................................................2-1482
2.33.47 Gprs Initial access rate.....................................................................2-1484
2.33.48 Downlink Delay Signal TBF Time......................................................2-1484
2.33.49 Extended uplink Signal TBF time ......................................................2-1485
2.33.50 Support splitting uplink tcp ack datagram ..........................................2-1486
2.33.51 Support copying uplink tcp ack datagram ..........................................2-1487
2.33.52 Support discarding duplicate uplink tcp ack datagram ........................2-1488
2.33.53 TrxPSBusyThs ................................................................................2-1489
2.33.54 Cn ..................................................................................................2-1491
2.33.55 Nn ..................................................................................................2-1493
2.33.56 Xn ..................................................................................................2-1494
2.33.57 One phase access initial code selection ............................................2-1496
2.33.58 Initial GPRS code scheme at one phase access ................................2-1497
2.33.59 Indicate Uplink and Downlink RLC Window Size value .......................2-1498
2.33.60 DTM MultiSlot Class 11 extended dynamic allocation ........................2-1499
2.33.61 Two phase access initial code selection ............................................2-1499
2.33.62 Support downlink five timeslots.........................................................2-1500
2.33.63 Sending PSI13 or not.......................................................................2-1501
2.33.64 Packet Neighbour Cell Data message sending times indication ..........2-1502
2.33.65 Times of interval that send downlink dummy block .............................2-1503
2.33.66 Optimize dummy block in downlink delay state ..................................2-1504
2.33.67 Indication of different reselection parameters in packet idle mode and
packet transfer mode..........................................................................2-1505
2.33.68 supoort TBF multiplexing of active TBF ............................................2-1506
2.33.69 Optimize pending block in downlink transfer state ..............................2-1507
2.34 PS Channel Schedule Configuration (GPsChannelSchedule) .........................2-1508
2.34.1 PS Channel Schedule Configuration ID...............................................2-1508
2.34.2 Minimal number of idle CS channel.....................................................2-1509
2.34.3 PS preempt CS support .....................................................................2-1510
2.34.4 CS subscriber moving support............................................................ 2-1511
2.34.5 EDGE initial downlink allocation by multislot class1 .............................2-1512
2.34.6 GPRS initial downlink allocation by multislot class1 .............................2-1513
2.34.7 PS channel expand support ...............................................................2-1514
2.34.8 Threshold of idle tch for PS channel expand........................................2-1515
2.34.9 PS busy threshold .............................................................................2-1516
2.34.10 Maximum PS uplink user per ts ........................................................2-1518
XLII
SJ-20130408140048-016|2013-07-17(R1.0)
2.34.11 Max PS downlink user per TS...........................................................2-1519

2.34.12 Multislot allocation of extended range cell support .............................2-1520
2.34.13 Support CS preempt PS optimization ................................................2-1521
2.34.14 Initial priority direction of multislot capability.......................................2-1522
2.34.15 Support the discontinuous PDTCH allocation ....................................2-1523
2.35 GPRS-EDGE Schedule Configuration (GGprsEdgeSchedule) ........................2-1524
2.35.1 GPRS-EDGE Schedule Configuration ID ............................................2-1524
2.35.2 Subscriber occupying other preference channel support ......................2-1525
2.35.3 PS subscriber moving out of other preference channel support.............2-1526
2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving .....................2-1527
2.35.5 Threshold of GPRS/EDGE service moving ..........................................2-1529
2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell ................................2-1530
2.35.7 Allocating weights of EGPRS .............................................................2-1531
2.36 NACC Configuration (GNACC) .....................................................................2-1532
2.36.1 NACC Configuration ID......................................................................2-1532
2.36.2 CCN mode support............................................................................2-1533
2.36.3 Cell support system message status flow ............................................2-1535
2.36.4 3G NACC support .............................................................................2-1536
2.37 NC2 Configuration (GCellPsNc2)..................................................................2-1537
2.37.1 NC2 Configuration ID.........................................................................2-1537
2.37.2 Cell reselection offset in idle...............................................................2-1538
2.37.3 Cell reselection temporary offset in idle ...............................................2-1539
2.37.4 Penalty time of cell reselection in idle..................................................2-1540
2.37.5 Interval of reselecting the same cell in idle ..........................................2-1541
2.37.6 Threshold of HSC signal level in idle...................................................2-1543
2.37.7 HCS Priority in idle ............................................................................2-1544
2.37.8 C31 hysteresis in idle.........................................................................2-1545
2.37.9 GPRS cell reselection hysteresis in idle ..............................................2-1546
2.37.10 Routing reselection hysteresis in idle ................................................2-1547
2.37.11 Random access attempt permitted in idle ..........................................2-1548
2.37.12 Usage of cell reselection offset in idle ...............................................2-1549
2.37.13 GPRS access minimal signal level in idle ..........................................2-1550
2.37.14 HCS exist in idle ..............................................................................2-1552
2.37.15 GPRS MAX initial access signal level in idle ......................................2-1553
2.37.16 Cell reselection offset in transfer .......................................................2-1554
2.37.17 Cell reselection temporary offset in transfer .......................................2-1555
2.37.18 Penalty time of cell reselection in transfer..........................................2-1556
XLIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.19 Interval of reselecting the same cell in transfer ..................................2-1557

2.37.20 Threshold of HSC signal level in transfer...........................................2-1558
2.37.21 HCS Priority in transfer ....................................................................2-1560
2.37.22 C31 hysteresis in transfer.................................................................2-1561
2.37.23 GPRS cell reselection hysteresis in transfer ......................................2-1562
2.37.24 Routing reselection hysteresis in transfer ..........................................2-1563
2.37.25 Random access attempt permitted in transfer ....................................2-1564
2.37.26 Usage of cell reselection offset in transfer .........................................2-1566
2.37.27 GPRS access minimal signal level in transfer ....................................2-1567
2.37.28 HCS exist in transfer ........................................................................2-1568
2.37.29 GPRS MAX initial access signal level in transfer ................................2-1569
2.37.30 NC hold time in non-drx mode ..........................................................2-1570
2.37.31 Packet idle mode .............................................................................2-1572
2.37.32 Packet transmission mode ...............................................................2-1573
2.37.33 Extended measurement report order.................................................2-1574
2.37.34 Type of extended measurement report ..............................................2-1575
2.37.35 Report period of extended measurement...........................................2-1577
2.37.36 The size of test report's slip window ..................................................2-1578
2.37.37 Minimum measurement reports in slip window to avoid penalty...........2-1579
2.37.38 Enable uplink interference decision in NC2........................................2-1580
2.37.39 Enable downlink interference decision in NC2 ...................................2-1581
2.37.40 P of uplink interference decision in NC2 ............................................2-1582
2.37.41 N of uplink interference decision in NC2 ............................................2-1583
2.37.42 P of downlink interference decision in NC2........................................2-1584
2.37.43 N of downlink interference decision in NC2........................................2-1585
2.37.44 Uplink interference quality offset .......................................................2-1586
2.37.45 Uplink interference level offset..........................................................2-1588
2.37.46 Downlink interference quality offset...................................................2-1589
2.37.47 Downlink interference level offset......................................................2-1591
2.37.48 Num of samples that calculates average of uplink signal level in
NC2 ..................................................................................................2-1593
2.37.49 Num of samples that calculates average of downlink signal level in
NC2 ..................................................................................................2-1594
2.37.50 Num of samples that calculates average of uplink quality level in
NC2 ..................................................................................................2-1595
2.37.51 Num of samples that calculates average of downlink quality level in
NC2 ..................................................................................................2-1596
2.37.52 NC2 mode between 2G and 3G........................................................2-1597
XLIV
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.53 Serving Cell Load Threshold ............................................................2-1598

2.37.54 Serving Cell Capacity Threshold.......................................................2-1599
2.37.55
Cell reselection control switch
by serving cell traffic busy
.........................................................................................................2-1600
2.37.56 Is Dual-Frequency NC2 Support .......................................................2-1601
2.37.57 Dual-Frequency NC2 Parameter N ...................................................2-1602
2.37.58 Dual-Frequency NC2 Parameter P ...................................................2-1603
2.37.59 Dual-Frequency NC2 TA Threshold ..................................................2-1604
2.37.60 Dual-Frequency NC2 load Threshold ................................................2-1605
2.37.61 NC2 UL RxLevel Threshold ..............................................................2-1607
2.37.62 NC2 DL RxLevel Threshold ..............................................................2-1608
2.37.63 NC2 UL RxQual Threshold...............................................................2-1609
2.37.64 NC2 DL RxQual Threshold...............................................................2-1610
2.37.65 avoid Ping-Pang cell reselection Timer.............................................. 2-1611
2.37.66 NC2 Reselection hysteresis Threshold..............................................2-1612
2.37.67 NC2 reselection DL RxLevel Threshold.............................................2-1613
2.37.68 NC2 Distance Windows ...................................................................2-1614
2.37.69 Downlink RxQual N Value ................................................................2-1615
2.37.70 Downlink RxQual Criteria .................................................................2-1616
2.37.71 Downlink RxLev P Value ..................................................................2-1617
2.37.72 Downlink RxLev N Value ..................................................................2-1618
2.37.73 Downlink RxLev Criteria ...................................................................2-1619
2.37.74 Distance P Value .............................................................................2-1620
2.37.75 Distance N Value .............................................................................2-1620
2.37.76 Distance Criteria..............................................................................2-1621
2.37.77 Cell reselection by traffic ..................................................................2-1622
2.37.78 Cell change failure penalty time ........................................................2-1623
2.37.79 Cell change failure penalty level offset ..............................................2-1624
2.37.80 Uplink RxQual P Value.....................................................................2-1625
2.37.81 Uplink RxQual N Value.....................................................................2-1626
2.37.82 Uplink RxQual Criteria .....................................................................2-1627
2.37.83 Uplink RxLev P Value ......................................................................2-1628
2.37.84 Uplink RxLev N Value ......................................................................2-1629
2.37.85 Uplink RxLev Criteria .......................................................................2-1630
2.37.86 Traffic cell change threshold .............................................................2-1631
XLV
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.87 PBGT P Value .................................................................................2-1632

2.37.88 PBGT N Value.................................................................................2-1633
2.37.89 PBGT Criteria..................................................................................2-1634
2.37.90 Invalid reassign time ........................................................................2-1634
2.37.91 Invalid reassign maximum times .......................................................2-1636
2.37.92 Indication for sending PNCD before NC2 PCCO................................2-1637
2.37.93 Downlink RxQual P Value ................................................................2-1638
2.38 DTM Configuration (GDTM) .........................................................................2-1639
2.38.1 DTM Configuration ID ........................................................................2-1639
2.38.2 DTM support .....................................................................................2-1639
2.38.3 Support enhanced DTM capability ......................................................2-1641
2.38.4 Max number of GTTP lapdm frame.....................................................2-1642
2.39 PS Power Control (GPsPowerControl) ..........................................................2-1643
2.39.1 PS Power Control ID..........................................................................2-1643
2.39.2 Uplink power control strategy .............................................................2-1643
2.39.3 Downlink power control strategy .........................................................2-1645
2.39.4 Expected signal intensity of MS ..........................................................2-1646
2.39.5 Downlink Power Control Mode ...........................................................2-1647
2.39.6 Power Control Level ..........................................................................2-1648
2.39.7 Power descending of PDCH to BCCH in a mode .................................2-1649
2.39.8 Power control parameter....................................................................2-1650
2.39.9 Filter period in the packet idle mode ...................................................2-1651
2.39.10 Filter period in packet transmission mode..........................................2-1652
2.39.11 Power control measurement channel ................................................2-1653
2.39.12 Filter constant of power control .........................................................2-1654
2.39.13 Max power reduction of CS1 ............................................................2-1655
2.39.17 Max power reduction of MCS1..........................................................2-1658
XLVI
SJ-20130408140048-016|2013-07-17(R1.0)

2.39.26 Window of averaging uplink signal ....................................................2-1667
2.39.27 Window of averaging downlink signal................................................2-1668
2.39.28 Window of averaging uplink quality ...................................................2-1669
2.39.29 Window of averaging downlink quality ...............................................2-1670
2.39.30 Threshold of uplink signal for increasing power..................................2-1671
2.39.31 Threshold of downlink signal for increasing power .............................2-1672
2.39.32 Threshold of uplink signal for decreasing power.................................2-1673
2.39.33 Threshold of downlink signal for decreasing power ............................2-1675
2.39.34 Threshold of uplink MEAN_BEP for increasing power in GPRS ..........2-1676
2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS ...............2-1677
2.39.36 Threshold of downlink quality for increasing power in GPRS...............2-1678
2.39.37 Threshold of uplink MEAN_BEP for decreasing power in GPRS .........2-1679
2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS ..............2-1680
2.39.39 Threshold of downlink quality for decreasing power in GPRS .............2-1681
2.39.40 Threshold of uplink MEAN_BEP for increasing power in EDGE ..........2-1682
2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE ...............2-1683
2.39.42 Threshold of downlink MEAN_BEP for increasing power in EDGE ......2-1684
2.39.43 Threshold of downlink CV_BEP for increasing power in EDGE ...........2-1685
2.39.44 Threshold of uplink MEAN_BEP for decreasing power in EDGE .........2-1687
2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE ..............2-1688
2.39.46 Threshold of downlink MEAN_BEP for decreasing power in EDGE ......2-1689
2.39.47 Threshold of downlink CV_BEP for decreasing power in EDGE ..........2-1690
2.39.48 N of uplink signal for increasing power ..............................................2-1691
2.39.49 N of downlink signal for increasing power ..........................................2-1692
2.39.50 N of uplink signal for decreasing power .............................................2-1693
2.39.51 N of downlink signal for decreasing power.........................................2-1694
2.39.52 N of uplink quality for increasing power in GPRS ...............................2-1695
2.39.53 N of downlink quality for increasing power in GPRS ...........................2-1696
2.39.54 N of uplink quality for decreasing power in GPRS ..............................2-1697
2.39.55 N of downlink quality for decreasing power in GPRS ..........................2-1698
2.39.56 N of uplink quality for increasing power in EDGE ...............................2-1699
2.39.57 N of downlink quality for increasing power in EDGE ...........................2-1700
2.39.58 N of uplink quality for decreasing power in EDGE ..............................2-1701
2.39.59 N of downlink quality for decreasing power in EDGE ..........................2-1702
2.39.60 P of uplink signal for increasing power ..............................................2-1703
2.39.61 P of downlink signal for increasing power ..........................................2-1704
XLVII
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.62 P of uplink signal for decreasing power .............................................2-1705

2.39.63 P of downlink signal for decreasing power .........................................2-1706
2.39.64 P of uplink quality for increasing power in GPRS ...............................2-1707
2.39.65 P of downlink quality for increasing power in GPRS ...........................2-1708
2.39.66 P of uplink quality for decreasing power in GPRS ..............................2-1709
2.39.67 P of downlink quality for decreasing power in GPRS ..........................2-1710
2.39.68 P of uplink quality for increasing power in EDGE ............................... 2-1711
2.39.69 P of downlink quality for increasing power in EDGE ...........................2-1713
2.39.70 P of uplink quality for decreasing power in EDGE ..............................2-1714
2.39.71 P of downlink quality for decreasing power in EDGE ..........................2-1715
2.39.72 Step of uplink power increase...........................................................2-1716
2.39.73 Step of uplink power decrease..........................................................2-1717
2.39.74 Step of downlink power increase ......................................................2-1718
2.39.75 Step of downlink power decrease .....................................................2-1719
2.39.76 Mode of downlink closed loop power control......................................2-1720
2.39.77 lowest CS of enabling downlink power control in GPRS .....................2-1721
2.39.78 lowest MCS of enabling downlink power control in EDGE...................2-1722
2.39.79 try to decrease downlink power ........................................................2-1724
2.39.80 reduced power of dummy usf in good uplink radio condition ...............2-1725
2.39.81 reduced power of dummy usf in general uplink radio condition............2-1726
2.39.82 reduced power of dummy usf in bad uplink radio condition .................2-1727
2.40 EDGE Configuration (GCellEdge).................................................................2-1729
2.40.1 EDGE Configuration ID......................................................................2-1729
2.40.2 EGPRS packet channel request access program support.....................2-1730
2.40.3 Uplink LA+IR quality control support ...................................................2-1731
2.40.4 Take Preemptive transmit bit function..................................................2-1732
2.40.5 Average filter period for uplink BEP ....................................................2-1733
2.40.6 Average filter period for downlink BEP ................................................2-1734
2.40.7 EGPRS phone quality measure mode.................................................2-1736
2.40.8 EGPRS uplink init. Coding scheme ....................................................2-1737
2.40.9 EGPRS downlink init. Coding scheme ................................................2-1738
2.40.10 EGPRS uplink max. coding scheme .................................................2-1739
2.40.11 EGPRS downlink max. coding scheme .............................................2-1740
2.40.12 edge Initial access rate ....................................................................2-1741
2.40.13 EGPRS phones init. Code can be changed .......................................2-1742
2.40.14 Bep_Period2 of uplink......................................................................2-1743
2.40.15 Bep_Period2 of downlink..................................................................2-1744
XLVIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.40.16 Interval number of downlink EGPRS TBF's RRBP .............................2-1745

2.40.17 Interval number of uplink EGPRS TBF's ACK ....................................2-1746
2.40.18 Initial EGPRS code schem at one phase access................................2-1747
2.41 Enhanced EDGE Configuration (GEhancedEdge) .........................................2-1748
2.41.1 Enhanced EDGE Configuration ID ......................................................2-1748
2.41.2 EGPRS2-A uplink initial coding scheme ..............................................2-1749
2.41.3 EGPRS2-A downlink initial coding scheme..........................................2-1751
2.41.4 EGPRS2-A uplink maximum coding scheme .......................................2-1752
2.41.5 EGPRS2-A downlink maximum coding scheme...................................2-1753
2.41.6 FANR TBF support ............................................................................2-1754
2.41.7 DLDC support ...................................................................................2-1755
2.41.8 RTTI support .....................................................................................2-1756
2.41.9 Enable event-based FANR in downlink TBF ........................................2-1757
2.41.10 Enable reduced latency access ........................................................2-1758
2.41.11 Encoding mode of PAN in uplink TBF ................................................2-1759
2.42 Serving Cell CRRM Configuration (GCrrmCellLd) ..........................................2-1760
2.42.1 Serving Cell CRRM Configuration ID ..................................................2-1760
2.42.2 Uplink Load Low Threshold ................................................................2-1761
2.42.3 Uplink Load Medium Threshold ..........................................................2-1762
2.42.4 Uplink Load High Threshold ...............................................................2-1763
2.42.5 Downlink Load Low Threshold............................................................2-1764
2.42.10 Real Time Uplink Load High Threshold .............................................2-1769
2.42.11 Real Time Downlink Load Low Threshold ..........................................2-1770
2.42.12 Real Time Downlink Load Medium Threshold ....................................2-1771
2.42.13 Real Time Downlink Load High Threshold .........................................2-1772
2.42.14 Not Real Time Uplink Load Low Threshold ........................................2-1773
2.42.15 Not Real Time Uplink Load Medium Threshold ..................................2-1773
2.42.16 Not Real Time Uplink Load High Threshold .......................................2-1774
2.42.17 Not Real Time Downlink Load Low Threshold....................................2-1775
2.42.18 Not Real Time Downlink Load Medium Threshold ..............................2-1776
2.42.19 Not Real Time Downlink Load High Threshold ...................................2-1777
2.43 SubCell (GSubCell) .....................................................................................2-1778
2.43.1 SubCell ID ........................................................................................2-1778
XLIX
SJ-20130408140048-016|2013-07-17(R1.0)
2.43.2 SubCell Sequence.............................................................................2-1779

2.43.3 Frequency Band of SubCell................................................................2-1780
2.44 Subcell Handover Control (GScHandoverControl) .........................................2-1781
2.44.1 COBCCH Handover Control ID...........................................................2-1781
2.44.2 PBGT handover start threshold of subcell2 .........................................2-1782
2.44.3 FR to AMRHR handover load threshold of subcell2 .............................2-1783
2.44.4 The load of HO from FR to HR(V1) in subcell2 ....................................2-1784
2.44.5 SubCell handover algorithm(High Speed)............................................2-1785
2.44.6 SubCell handover algorithm(Middle Speed).........................................2-1786
2.44.7 SubCell handover algorithm(Low Speed) ............................................2-1787
2.44.8 The MAX of path loss ........................................................................2-1788
2.44.9 The MIN of path loss..........................................................................2-1790
2.44.10 The MAX of time advance ................................................................2-1791
2.44.11 The MIN of time advance .................................................................2-1791
2.44.12 Inter Site handover to SubCell2 permitted .........................................2-1792
2.44.13 Measure BCCH when in subcell2......................................................2-1793
2.44.14 Good C/I .........................................................................................2-1794
2.44.15 Good value P ..................................................................................2-1796
2.44.16 Good value N ..................................................................................2-1797
2.44.17 Bad C/I ...........................................................................................2-1798
2.44.18 Bad value P ....................................................................................2-1799
2.44.19 Bad value N ....................................................................................2-1800
2.44.20 Handover Parameter N of SubCell1 ..................................................2-1801
2.44.21 Handover Parameter P of SubCell1 ..................................................2-1802
2.44.22 Handover Parameter N of SubCell2 ..................................................2-1803
2.44.23 Handover Parameter P of SubCell2 ..................................................2-1804
2.44.24 SubCell2 To SubCell1 Handover Threshold .......................................2-1805
2.44.25 The load of HO from HR(V1) to FR for Subcell2.................................2-1807
2.44.28 Bad C/I for assignment.....................................................................2-1810
2.44.29 Good C/I for assignment .................................................................. 2-1811
2.44.30 The MAX of path loss for assignment................................................2-1812
2.44.31 The MIN of path loss for assignment .................................................2-1813
2.44.32 The MAX of time advance for assignment .........................................2-1814
2.44.33 The MIN of time advance for assignment ..........................................2-1815
2.44.34 The load of HO from HR(V1) to FR for Subcell2 ................................2-1816
L
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.35 Traffic High Load Threshold of SubCell1 ...........................................2-1817

2.44.36 Traffic Threshold of Handover in SubCell1.........................................2-1819
2.44.37 Traffic Threshold of Handover out SubCell1 ......................................2-1820
2.44.38 Traffic High Load Threshold of SubCell2 ...........................................2-1821
2.44.39 Traffic Threshold of Handover in SubCell2.........................................2-1822
2.44.40 Traffic Threshold of Handover out SubCell2 ......................................2-1823
2.44.41 Use Load Balance ...........................................................................2-1824
2.45 SubCell PS Channel Allocation Configuration (GSubCellPsAlloc) ...................2-1825
2.45.1 SubCell PS Channel Allocation Configuration ID .................................2-1825
2.45.2 SubCell selection of PS channel allocation..........................................2-1826
2.45.3 RXLEV threshold in SubCell 1............................................................2-1828
2.45.4 RXLEV threshold in SubCell 2............................................................2-1829
2.45.5 RxLev P Value ..................................................................................2-1830
2.45.6 RxLev N Value ..................................................................................2-1831
2.45.7 TA threshold for PS channel allocate in SubCell1 ................................2-1832
2.45.8 TA threshold for PS channel allocate in SubCell2 ................................2-1833
2.45.9 TA P Value ........................................................................................2-1834
2.45.10 TA N Value ......................................................................................2-1835
2.45.11 SubCell1 PS Busy Threshold............................................................2-1836
2.45.12 SubCell2 PS Busy Threshold ...........................................................2-1837
2.45.13 Band priority based Initial access in CoBcch cell................................2-1838
2.45.14 Load banlance indication in CoBcch Cell...........................................2-1839
2.45.15 SubCell 1 high load threshold ...........................................................2-1840
2.45.16 SubCell 1 handover in threshold .......................................................2-1841
2.45.17 SubCell 2 high load threshold ...........................................................2-1842
2.45.18 SubCell 2 handover in threshold .......................................................2-1843
2.46 Power Control (GPowerControl) ...................................................................2-1844
2.46.1 Power Control ID ...............................................................................2-1844
2.46.2 GSubCell DN ....................................................................................2-1844
2.46.3 Uplink level Sample count ..................................................................2-1845
2.46.4 Uplink level Weight ............................................................................2-1846
2.46.5 Downlink level Sample count..............................................................2-1848
2.46.6 Downlink level Weight........................................................................2-1849
2.46.7 Uplink quality Sample count ...............................................................2-1850
2.46.8 Uplink quality Weight .........................................................................2-1851
2.46.9 Downlink quality Sample count ...........................................................2-1852
2.46.10 Downlink quality Weight ...................................................................2-1853
LI
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.11 Uplink power control allowed ............................................................2-1854

2.46.12 Downlink power control allowed........................................................2-1855
2.46.13 Increase step of uplink power control ................................................2-1857
2.46.14 Decrease step of uplink power control...............................................2-1858
2.46.15 Increase uplink level Threshold ........................................................2-1859
2.46.16 Decrease uplink level Threshold .......................................................2-1860
2.46.17 Increase uplink quality Threshold......................................................2-1861
2.46.18 Decrease uplink quality Threshold ....................................................2-1862
2.46.19 Increase downlink level Threshold ....................................................2-1864
2.46.20 Decrease downlink level Threshold...................................................2-1865
2.46.21 Increase downlink quality Threshold .................................................2-1866
2.46.22 Decrease downlink quality Threshold ................................................2-1867
2.46.23 Increase uplink level Value P ............................................................2-1868
2.46.24 Increase uplink level Value N............................................................2-1869
2.46.25 Increase downlink level Value P........................................................2-1871
2.46.26 Increase downlink level Value N .......................................................2-1872
2.46.27 Decrease uplink level Value P ..........................................................2-1873
2.46.28 Decrease uplink level Value N ..........................................................2-1874
2.46.29 Decrease downlink level Value P ......................................................2-1875
2.46.30 Decrease downlink level Value N ......................................................2-1876
2.46.31 Increase uplink quality Value P .........................................................2-1877
2.46.32 Increase uplink quality Value N .........................................................2-1878
2.46.33 Increase downlink quality Value P.....................................................2-1879
2.46.34 Increase downlink quality Value N.....................................................2-1880
2.46.35 Decrease uplink quality Value P........................................................2-1881
2.46.36 Decrease uplink quality Value N .......................................................2-1882
2.46.37 Decrease downlink quality Value P ...................................................2-1883
2.46.38 Decrease downlink quality Value N ...................................................2-1884
2.46.39 MAX power level of MS....................................................................2-1885
2.46.40 MIN power level of MS .....................................................................2-1886
2.46.41 MIN power level of BS .....................................................................2-1887
2.46.42 Uplink rapid power control ................................................................2-1888
2.46.43 Downlink rapid power control............................................................2-1889
2.46.44 MIN interval of power control ............................................................2-1890
2.46.45 Power control PwrDecrLimit .............................................................2-1892
2.46.46 Report period of measurement for power control ...............................2-1893
2.46.47 BCCH power control downlink ..........................................................2-1894
LII
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.48 BCCH maxim power decrease..........................................................2-1895

2.46.49 BCCH idle burst power.....................................................................2-1896
2.46.50 Uplink exponential filter ....................................................................2-1898
2.46.51 Downlink exponential filter................................................................2-1899
2.46.52 Uplink level optimize ........................................................................2-1900
2.46.53 Downlink level optimize....................................................................2-1901
2.46.54 Minimize Interval of downlink power control .......................................2-1902
2.46.55 Increase step of downlink power control ............................................2-1903
2.46.56 Decrease step of downlink power control ..........................................2-1904
2.46.57 Urgent Rescue Switch .....................................................................2-1905
2.46.58 Uplink Initial State Effectively Switch .................................................2-1906
2.46.59 Initial State MR Number ...................................................................2-1907
2.46.60 High Level High Quality Effectively Switch ........................................2-1908
2.46.61 Uplink Exponential Filter Cycle .........................................................2-1909
2.46.62 Downlink Exponential Filter Cycle .....................................................2-1910
2.46.63 Uplink Window Filter Weight Sequence ............................................ 2-1911
2.46.64 Downlink Window Filter Weight Sequence ........................................2-1912
2.46.65 Uplink Level Urgent Rescue Threshold .............................................2-1913
2.46.66 Downlink Level Urgent Rescue Threshold .........................................2-1914
2.46.67 Uplink Quality Urgent Rescue Threshold ...........................................2-1915
2.46.68 Downlink Quality Urgent Rescue Threshold.......................................2-1916
2.46.69 N of Urgent Rescue .........................................................................2-1917
2.46.70 P of Urgent Rescue .........................................................................2-1918
2.46.71 Uplink Power Reduce Level Margin ..................................................2-1919
2.46.72 Downlink Power Reduce Level Margin ..............................................2-1921
2.46.73 Initial State Power Decrease Limit ....................................................2-1922
2.46.74 Uplink Power Decrease Limit of Quality rank ....................................2-1923
2.46.75 Downlink Power Decrease Limit of Quality rank ................................2-1924
2.46.76 Uplink Power decrease Maximum Step of Quality 0 ...........................2-1925
2.46.77 Downlink Power decrease Maximum Step of Quality 0 .......................2-1926
2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2 ..................2-1927
2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2..............2-1928
2.46.80 Uplink Power decrease Maximum Step of other Quality .....................2-1929
2.46.81 Downlink Power decrease Maximum Step of other Quality .................2-1930
2.46.82 Downlink New Exponential Filter RQ Target.......................................2-1931
2.46.83 Downlink New Exponential Filter RQ Length......................................2-1931
2.46.84 Downlink power control rescue .........................................................2-1932
LIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.85 Downlink New Exponential Filter Interval...........................................2-1933

2.46.86 Downlink New Exponential Filter Function .........................................2-1934
2.46.87 Downlink New Exponential Filter Level Weight ..................................2-1935
2.46.88 Downlink New Exponential Filter Level Target....................................2-1936
2.46.89 Downlink New Exponential Filter Level Length...................................2-1937
2.46.90 Downlink New Exponential Filter Increase\Decrease Ratio .................2-1938
2.46.91 Downlink good level bad quality .......................................................2-1939
2.46.92 Uplink New Exponential Filter RQ Weight..........................................2-1940
2.46.93 Uplink New Exponential Filter RQ Target...........................................2-1941
2.46.94 Uplink New Exponential Filter RQ Length ..........................................2-1942
2.46.95 Uplink power control new filter interval ..............................................2-1942
2.46.96 Uplink power control new filter ..........................................................2-1943
2.46.97 Uplink New Exponential Filter Level Weight.......................................2-1944
2.46.98 Uplink New Exponential Filter Level Target........................................2-1945
2.46.99 Uplink New Exponential Filter Level Length .......................................2-1947
2.46.100 Uplink New Exponential Filter Increase\Decrease Ratio ...................2-1947
2.46.101 Uplink good level bad quality .........................................................2-1948
2.46.102 The different increase downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-1949
2.46.103 The different decrease downlink level threshold of SAIC MS and
NON-SAIC MS...................................................................................2-1950
2.46.104 Power control new filter para2 ........................................................2-1951
2.46.105 Power control new filter para1 ........................................................2-1952
2.46.106 Downlink rescue quality threshold ...................................................2-1953
2.46.107 Downlink rescue level threshold......................................................2-1954
2.46.108 Downlink New Exponential Filter RQ Weight....................................2-1955
2.47 Power Share (GPwShare)............................................................................2-1956
2.47.1 Power Share ID.................................................................................2-1956
2.47.2 Cell enable power dynamic sharing or not ...........................................2-1957
2.47.3 Power adjustment methods priority .....................................................2-1958
2.47.4 Power reserved for present users .......................................................2-1959
2.47.5 Power Adjusting Threshold ................................................................2-1960
2.47.6 Threshold for Increase 8PSK Power ...................................................2-1961
2.47.7 Hysteresis for Increase 8PSK Power ..................................................2-1963
2.47.8 Delay for Increase 8PSK Power .........................................................2-1964
2.47.9 Delay for Resume PDTCH Power.......................................................2-1965
2.48 PS Handover Control (GPsHandoverControl) ................................................2-1966
2.48.1 PS Handover Control ID.....................................................................2-1966
LIV
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.2 PS handover support .........................................................................2-1967

2.48.3 ACK of PS handover command ..........................................................2-1968
2.48.4 Blind transmission support .................................................................2-1968
2.48.5 Optimized handover support ..............................................................2-1969
2.48.6 Send handover access in synchronized handover ...............................2-1970
2.48.7 Send handover access in pre-synchronized handover..........................2-1971
2.48.8 Reset RLC ........................................................................................2-1973
2.48.9 Trigger PS handover by PCCN...........................................................2-1974
2.48.10 Number of zero allowed in AV...........................................................2-1975
2.48.11 Uplink power level Sample count ......................................................2-1976
2.48.12 Downlink power level Sample count..................................................2-1977
2.48.13 Uplink quality Sample count .............................................................2-1978
2.48.14 Downlink quality Sample count .........................................................2-1979
2.48.15 Distance .........................................................................................2-1980
2.48.16 Neighboring cell...............................................................................2-1981
2.48.17 Uplink receive level Threshold ..........................................................2-1982
2.48.18 Uplink receive level Value P .............................................................2-1984
2.48.19 Uplink receive level Value N .............................................................2-1985
2.48.20 Downlink receive level Threshold......................................................2-1986
2.48.21 Downlink receive level Value P .........................................................2-1987
2.48.22 Downlink receive level Value N .........................................................2-1989
2.48.23 Uplink receive quality Threshold .......................................................2-1990
2.48.24 Uplink receive quality Value P...........................................................2-1991
2.48.25 Uplink receive quality Value N ..........................................................2-1992
2.48.26 Downlink receive quality Threshold ...................................................2-1994
2.48.27 Downlink receive quality Value P ......................................................2-1995
2.48.28 Downlink receive quality Value N ......................................................2-1996
2.48.29 Uplink receive level of intra-ho Threshold ..........................................2-1997
2.48.30 Uplink receive level of intra-ho Value P .............................................2-1999
2.48.31 Uplink receive level of intra-ho Value N .............................................2-2000
2.48.32 Downlink receive level of intra-ho Threshold......................................2-2001
2.48.33 Downlink receive level of intra-ho Value P .........................................2-2002
2.48.34 Downlink receive level of intra-ho Value N .........................................2-2004
2.48.35 Rapid handover Threshold ...............................................................2-2005
2.48.36 Rapid handover Value N ..................................................................2-2006
2.48.37 Macro to micro handover Threshold..................................................2-2007
2.48.38 Macro to micro handover Value N .....................................................2-2008
LV
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.39 Max time advance threshold between MS and BTS ...........................2-2009

2.48.40 Distance handover Value P ..............................................................2-2010
2.48.41 Distance handover Value N .............................................................. 2-2011
2.48.42 PBGT handover Value P ..................................................................2-2012
2.48.43 PBGT handover Value N ..................................................................2-2013
2.48.44 MIN interval between inter-cell handover...........................................2-2014
2.48.45 Prior layer selecting parameter on signal level/quality ........................2-2016
2.48.46 Handover to same layer other band neighbour cell for PBGT
permitted ...........................................................................................2-2017
2.48.47 Handover to neighbour cell with no Layer Relation for PBGT
permitted ...........................................................................................2-2018
2.48.48 Handover to upper layer neighbour cell for PBGT permitted ...............2-2019
2.48.49 Handover to under layer neighbor cell for PBGT permitted .................2-2020
2.48.50 Synchronism ..................................................................................2-2021
2.48.51 Asynchronism .................................................................................2-2022
2.48.52 Pseudo-synchronism (HoPatternInd_2).............................................2-2023
2.48.53 Pre-synchronism (HoPatternInd_3) ...................................................2-2024
2.48.54 Allow intra-Cell handover attempt due to uplink interference ...............2-2025
2.48.55 Allow intra-Cell handover attempt due to downlink interference...........2-2026
2.48.56 Allow standard PBGT handover........................................................2-2027
2.48.57 Allow handover due to distance ........................................................2-2027
2.48.58 Allow automatic handover based on traffic.........................................2-2028
2.48.59 Enable rapid handover .....................................................................2-2029
2.48.60 Enable macro to micro handover ......................................................2-2030
2.48.61 Enable queue in handover ...............................................................2-2031
2.48.62 Enable queue in handover preemption in handover............................2-2032
2.48.63 Penalty time for handover failure ......................................................2-2033
2.48.64 Layer control value for handover on traffic .........................................2-2034
2.48.65 Frequency control value for handover on traffic..................................2-2035
2.48.66 Threshold of traffic for handover .......................................................2-2037
2.48.67 Traffic handover threshold ................................................................2-2038
2.48.68 Level offset during penalty................................................................2-2039
2.48.69 Uplink interference quality offset .......................................................2-2040
2.48.70 Uplink interference level offset..........................................................2-2041
2.48.71 Downlink interference quality offset...................................................2-2042
2.48.72 Downlink interference level offset......................................................2-2043
2.48.73 Invalid intra-handover time ...............................................................2-2045
2.48.74 MAX count of invalid intra-handover..................................................2-2046
LVI
SJ-20130408140048-016|2013-07-17(R1.0)
2.49 Trx (GTrx) ...................................................................................................2-2047

2.49.1 TRX ID .............................................................................................2-2047
2.49.2 TRX Sequence..................................................................................2-2048
2.49.3 GBtsPanel DN...................................................................................2-2049
2.49.4 GSubCell DN ....................................................................................2-2049
2.49.5 TRX type ..........................................................................................2-2050
2.49.6 Static power level ..............................................................................2-2051
2.49.7 Assign Priority of the Trx ....................................................................2-2053
2.49.8 Power level .......................................................................................2-2054
2.49.9 Pair Trx.............................................................................................2-2055
2.49.10 RTTI preference ..............................................................................2-2056
2.49.11 TSC ................................................................................................2-2057
2.49.12 TSC2 ..............................................................................................2-2058
2.49.13 ARFCN ...........................................................................................2-2059
2.49.14 GHoppingFrequency DN ..................................................................2-2060
2.49.15 GHoppingBaseband DN...................................................................2-2061
2.49.16 BCCH Mark.....................................................................................2-2061
2.49.17 Combiner Loss ................................................................................2-2062
2.49.18 HoppingFrequency MAIO.................................................................2-2063
2.49.19 Support TS freq-hopping ..................................................................2-2065
2.50 Ts (GTs) ......................................................................................................2-2066
2.50.1 Ts ID.................................................................................................2-2066
2.50.2 TS Sequence ....................................................................................2-2066
2.50.3 TS Channel Combination ...................................................................2-2067
2.50.4 MAIO................................................................................................2-2069
2.50.5 Dynamic TS ......................................................................................2-2071
2.50.6 Ps Service Preference Property..........................................................2-2072
2.50.7 Pair No. ............................................................................................2-2073
2.50.8 USF Mode Used In RTTI....................................................................2-2074
2.50.9 PDCH Precedence ............................................................................2-2075
2.50.10 GHoppingFrequency DN ..................................................................2-2077
2.50.11 Is Reserved .....................................................................................2-2078
2.51 Adjacent GSM Cell Configuration (GGsmRelation) ........................................2-2079
2.51.1 Relation type.....................................................................................2-2079
2.51.2 Adjacent GSM Cell Configuration ID ...................................................2-2080
2.51.3 DN of source Gsmcell ........................................................................2-2080
2.51.4 DN of source ExternalGsmcell............................................................2-2081
LVII
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.5 Relation Sequence ............................................................................2-2082

2.51.6 Priority of handover ...........................................................................2-2083
2.51.7 MIN power level for handover access .................................................2-2084
2.51.8 MIN threshold of signal level for handover on PBGT ............................2-2087
2.51.9 MIN threshold of signal level for handover on power level ....................2-2089
2.51.10 MIN threshold of signal level for handover on quality..........................2-2090
2.51.11 Is related cell ...................................................................................2-2091
2.51.12 Neighboring cell layer ......................................................................2-2092
2.51.13 Is handover forced neighbor cell .......................................................2-2094
2.51.14 MAX level difference of force handover .............................................2-2095
2.51.15 Handover force resource threshold ...................................................2-2096
2.51.16 Macro to micro handover Threshold..................................................2-2097
2.51.17 Macro to micro handover Value N .....................................................2-2099
2.51.18 Target cell traffic threshold................................................................2-2100
2.51.19 CS adjacent cell report priority..........................................................2-2101
2.51.20 PS adjacent cell report priority ..........................................................2-2102
2.51.21 The direction of neighbour cell for downlink rapid handover ................2-2104
2.51.22 Minimum RX level(PS) .....................................................................2-2105
2.51.23 Margin of PBGT handover(PS) .........................................................2-2108
2.51.24 Margin of RX handover(PS) .............................................................2-2109
2.51.25 Margin of quality handover(PS) ........................................................ 2-2110
2.51.26 Is related cell(PS) ............................................................................ 2-2111
2.51.27 Handover priority(PS) ...................................................................... 2-2112
2.51.28 Max TX power of MS(PS)................................................................. 2-2113
2.51.29 Traffic threshold of target cell(PS) ..................................................... 2-2114
2.51.30 Threshold of macro to micro handover(PS) ....................................... 2-2115
2.51.31 Counter of macro to micro handover(PS) .......................................... 2-2117
2.51.32 The number of C/I limited cell ........................................................... 2-2118
2.51.33 The objectID list of C/I limited cell ..................................................... 2-2119
2.51.34 The threshold list of C/I limited cell....................................................2-2120
2.51.35 Downlink rapid handover threshold ...................................................2-2121
2.51.36 Downlink rapid handover N ..............................................................2-2122
2.51.37 exclusive cell fro high speed ............................................................2-2123
2.51.38 CCN support ...................................................................................2-2124
2.51.39 Is the directed retry ncell ..................................................................2-2126
2.51.40 PBGT handover margin of subcell2...................................................2-2127
2.51.41 Rx level handover margin of subcell2................................................2-2128
LVIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.42 Rx quality handover margin of subcell2 .............................................2-2129

2.51.43 Min Rx level of Neighbour Cell for subcell2........................................2-2131
2.51.44 Target cell traffic threshold of Subcell2 ..............................................2-2134
2.51.45 Handover Priority Indication when serve cell shuttingdown .................2-2135
2.51.46 Is The Related Cell In dual- Frequency Network ................................2-2136
2.51.47 Downlink rapid handover threshold for SDCCH..................................2-2137
2.51.48 Downlink rapid handover N for SDCCH.............................................2-2139
2.51.49 Good level and bad quality handover NCell MARGIN.........................2-2140
2.51.50 Forbid Period For non-Emergency Handover.....................................2-2141
2.51.51 Forbid Period For Emergency Handover ...........................................2-2142
2.51.52 Cell reselection priority.....................................................................2-2144
2.51.53 Avoid Ping-Pang cell reselection Timer .............................................2-2145
2.51.55 Penalty Period For non-Emergency Handover ...................................2-2146
2.51.56 Penalty Period For Emergency Handover..........................................2-2148
2.51.57 Penalty Level For non-Emergency Handover.....................................2-2149
2.51.58 Penalty Level For Emergency Handover ...........................................2-2151
2.51.59 NC2 RxQual margin.........................................................................2-2152
2.51.60 NC2 RxLev margin ..........................................................................2-2153
2.51.61 NC2 Reselection hysteresis Threshold..............................................2-2154
2.51.62 NC2 reselection DL RxLevel Threshold.............................................2-2155
2.51.63 NC2 PBGT margin...........................................................................2-2156
2.51.64 NC2 neighbour cell RXLEV_ACCESS_MIN.......................................2-2157
2.51.65 NC2 neighbour cell MS_TXPWR_MAX .............................................2-2158
2.52 Interfere Gsm Cell Configuration (GGsmIntfRelation) .....................................2-2159
2.52.1 Interfere Gsm Cell Configuration ID ....................................................2-2159
2.52.2 GsmIntfRelation Sequence ................................................................2-2160
2.52.3 GGsmCell DN ...................................................................................2-2161
2.52.4 GExternalGsmCell DN .......................................................................2-2161
2.53 Visit Paging Cell (GGsmVpcRelation) ...........................................................2-2162
2.53.1 Visit Paging Cell ID............................................................................2-2162
2.53.2 VPC Id..............................................................................................2-2163
2.53.3 DN of GGsmCell ...............................................................................2-2164
2.54 Adjacent UTRAN Cell Configuration (GUtranRelation) ...................................2-2165
2.54.1 UTRAN Relation type ........................................................................2-2165
2.54.2 Adjacent UTRAN Cell Configuration ID ...............................................2-2166
2.54.3 DN of UTRAN FDD source cell...........................................................2-2167
LIX
SJ-20130408140048-016|2013-07-17(R1.0)
2.54.4 DN of UTRAN TDD source cell...........................................................2-2168

2.54.5 UTRAN Relation Sequence................................................................2-2169
2.54.6 RSCP offset handover to UTRAN adjacent cell....................................2-2170
2.54.7 Ec/No offset handover to UTRAN adjacent cell....................................2-2171
2.54.8 CS adjacent cell report priority............................................................2-2172
2.54.9 PS adjacent cell report priority............................................................2-2174
2.54.11 RSCP offset ....................................................................................2-2177
2.54.12 EcNo offset .....................................................................................2-2178
2.54.13 Target cell traffic threshold(PS) .........................................................2-2179
2.54.14 CCN support ...................................................................................2-2180
2.54.15 the priority of Utran Cell ...................................................................2-2181
2.54.16 Is the directed retry ncell ..................................................................2-2182
2.55 Adjacent E-UTRAN Cell Configuration (GEutranRelation) ..............................2-2183
2.55.1 Adjacent E-UTRAN Cell Configuration ID ............................................2-2183
2.55.2 DN of E-UTRAN FDD source cell .......................................................2-2184
2.55.3 DN of E-UTRAN TDD source cell .......................................................2-2185
2.55.4 UTRAN Relation Sequence................................................................2-2186
2.55.5 the PRIORITY of E-UTRAN cells for the specified EARFCN.................2-2187
2.55.6 CCN support .....................................................................................2-2188
2.55.7 The re-selecting forbid flag of LTE Ncell ..............................................2-2189
2.55.8 the PRIORITY of E-UTRAN cells for FastReturn to LTE .......................2-2190
2.55.9 the PRIORITY of E-UTRAN cells ........................................................2-2191
2.56 User and Service Resource Schedule (GUserAndSrvBasedSche) ..................2-2192
2.56.1 User and Service Based Resource Schedule ID ..................................2-2192
2.56.2 Support resource optimizing by service ...............................................2-2193
2.56.3 Threshold of PS resource congestion .................................................2-2194
2.56.4 Threshold of relieving PS resource congestion ....................................2-2195
2.57 User Priority and Service Type Configuration (GPsUserAndSrvType)..............2-2197
2.57.1 User Priority and Service Type Configuration ID ..................................2-2197
2.57.2 User Type .........................................................................................2-2198
2.57.3 Service Type .....................................................................................2-2199
2.57.4 Schedule Priority ...............................................................................2-2200
2.57.5 Downlink delay time...........................................................................2-2201
2.57.6 TBF occupancy .................................................................................2-2202
2.57.7 Max PDTCH num .............................................................................2-2203
2.57.8 Preempt priority.................................................................................2-2204
LX
SJ-20130408140048-016|2013-07-17(R1.0)
2.58 Cell Reserved Configuration (GCellRsv) .......................................................2-2205

2.58.1 Cell Reserved Configuration ID ..........................................................2-2205
2.58.2 Cell Reserved Parameter 1 ................................................................2-2205
2.58.8 Cell Reserved Parameter 7 ................................................................ 2-2211
2.58.10 Cell Reserved Parameter 9 ..............................................................2-2213
2.58.11 Cell Reserved Parameter 10.............................................................2-2213
2.58.12 Cell Reserved Parameter 11.............................................................2-2214
2.58.13 Cell Reserved Parameter 12 ............................................................2-2215
2.59 Priority-based Resel Configuration (GPriorityResel) .......................................2-2223
2.59.1 Priority-based Resel Configuration ID .................................................2-2223
2.59.2 Cell re-selection Switch Based on priority............................................2-2224
2.59.3 Priority of GSM cells ..........................................................................2-2225
2.59.4 threshold of serving cell that used by priority Cell re-selection
algorithm ...........................................................................................2-2226
2.59.5 threshold that Allow MS re-select to lower priority Cell .........................2-2228
2.59.6 Hysteresis of priority reselection algorithm ..........................................2-2229
2.59.7 Time hysteresis of priority reselection algorithm...................................2-2230
2.59.8 the default priority of Utran Cells.........................................................2-2231
2.59.9 the maximum thresholds of Utran reselection ......................................2-2232
2.59.10 the minimum thresholds of Utran reselection .....................................2-2233
2.59.11 Minimum RX level for Utran cells ......................................................2-2233
2.59.12 the default priority of EUtran Cells.....................................................2-2234
2.59.13 the maximum thresholds of EUtran reselection ..................................2-2235
2.59.14 the minimum thresholds of EUtran reselection ...................................2-2236
LXI
SJ-20130408140048-016|2013-07-17(R1.0)
2.59.15 Minimum RX level for EUtran cells ....................................................2-2237

2.59.16 High RSRQ thresholds for EUtran reselection....................................2-2238
2.59.17 Low RSRQ thresholds for EUtran reselection ....................................2-2239
2.59.18 Minimum RSRQ for EUtran cells.......................................................2-2240
2.59.19 Minimum RSRQ for EUtran cells based on RSRP..............................2-2241
2.59.20 Minimum RSRP RX level for EUtran cells..........................................2-2243
2.59.21 Enhanced Cell Reselection Parameters Indication .............................2-2244
2.59.22 the default priority of EUtran Cell in packet transfer mode ..................2-2245
2.59.23 the maximum thresholds of EUtran reselection in packet transfer
mode ................................................................................................2-2246
2.59.24 High RSRQ thresholds for EUtran reselection in packet transfer
mode ................................................................................................2-2247
2.59.25 the minimum thresholds of EUtran reselection in packet transfer
mode ................................................................................................2-2248
2.59.26 the minimum thresholds for FastReturn to LTE ..................................2-2249
2.59.27 Low RSRQ thresholds for EUtran reselection in packet transfer
mode ................................................................................................2-2250
2.59.28 Low RSRQ thresholds for FastReturn to LTE.....................................2-2251
2.59.29 Minimum RSRQ for EUtran cells based on RSRP in packet transfer
mode ................................................................................................2-2252
2.59.30 Minimum RSRQ for EUtran cells in packet transfer mode ...................2-2253
2.59.31 Minimum RSRQ of EUtran cells for FastReturn to LTE .......................2-2254
2.59.32 Minimum RX level for EUtran cells in packet transfer mode ................2-2255
2.59.33 Minimum RX level of EUtran cells for FastReturn to LTE ....................2-2256
2.59.34 Minimum RSRP RX level for EUtran cells in packet transfer mode ......2-2257
2.60 BSC Um Soft Synchronous Configuration (GUmsyn) .....................................2-2258
2.60.1 BSC Um Soft Synchronous Configuration ID .......................................2-2258
2.60.2 Um soft Synchronous Support............................................................2-2259
2.60.3 Soft Synchronous Measure Base AB ..................................................2-2260
2.60.4 Soft Synchronous Measure Base MTD ...............................................2-2261
2.60.5 Soft Synchronous Measure Base AB Start Time(hour) .........................2-2262
2.60.6 Soft Synchronous Measure Base AB Start Time(minute)......................2-2263
2.60.7 Soft Synchronous Measure Base AB Duration.....................................2-2264
2.60.8 Soft Synchronous Clock Adjust Start Time(hour) .................................2-2265
2.60.9 Soft Synchronous Clock Adjust Start Time(minute) ..............................2-2266
2.60.10 Soft Synchronous Clock Adjust Duration(minute) ...............................2-2267
2.60.11 Soft Synchronous Measure Base MTD Start Time(hour).....................2-2268
2.60.12 Soft Synchronous Measure Base MTD Start Time(minute) .................2-2269
LXII
SJ-20130408140048-016|2013-07-17(R1.0)
2.60.13 Soft Synchronous Measure Base MTD Duration ................................2-2270

2.60.14 Allow Detriment Adjust .....................................................................2-2271
2.60.15 Soft Synchronous Measure Base AB(Sunday)...................................2-2272
2.60.16 Soft Synchronous Measure Base AB(Monday) ..................................2-2273
2.60.17 Soft Synchronous Measure Base AB(Tuesday) .................................2-2274
2.60.18 Soft Synchronous Measure Base AB(Wednesday).............................2-2275
2.60.19 Soft Synchronous Measure Base AB(Thursday) ................................2-2276
2.60.20 Soft Synchronous Measure Base AB(Friday).....................................2-2277
2.60.21 Soft Synchronous Measure Base AB(Saturday).................................2-2278
2.60.22 Soft Synchronous Measure Base MTD(Sunday) ................................2-2279
2.60.23 Soft Synchronous Measure Base MTD(Monday) ...............................2-2280
2.60.24 Soft Synchronous Measure Base MTD(Tuesday)...............................2-2281
2.60.25 Soft Synchronous Measure Base MTD(Wednesday)..........................2-2282
2.60.26 Soft Synchronous Measure Base MTD(Thursday) .............................2-2283
2.60.27 Soft Synchronous Measure Base MTD(Friday) ..................................2-2284
2.60.28 Soft Synchronous Measure Base MTD(Saturday) ..............................2-2285
2.60.29 Soft Synchronous Clock Adjust(Sunday) ...........................................2-2286
2.60.30 Soft Synchronous Clock Adjust(Monday)...........................................2-2287
2.60.31 Soft Synchronous Clock Adjust(Tuesday)..........................................2-2288
2.60.32 Soft Synchronous Clock Adjust(Wednesday) .....................................2-2289
2.60.33 Soft Synchronous Clock Adjust(Thursday).........................................2-2290
2.60.34 Soft Synchronous Clock Adjust(Friday) .............................................2-2291
2.60.35 Soft Synchronous Clock Adjust(Saturday) .........................................2-2292
2.60.36 Level Difference Threshold of Ncell and Serving Cell .........................2-2293
2.60.37 Synchronous Measure handover Start Threshold...............................2-2294
2.60.38 Max Number Synchronous Measure TRX Per Site.............................2-2295
2.60.39 InterBSC Soft Synchronous Measure Support ...................................2-2295
2.60.40 Whether to adjust frame number.......................................................2-2296
2.60.41 Cycle adjustment .............................................................................2-2297
2.61 AMR Handover Control (GAmrHandoverControl)...........................................2-2298
2.61.1 Amr Handover Control ID ...................................................................2-2298
2.61.2 Uplink receive quality for AMR-FR Threshold ......................................2-2299
2.61.3 Uplink receive quality for AMR-FR Value N..........................................2-2300
2.61.4 Uplink receive quality for AMR-FR Value P..........................................2-2301
2.61.5 Uplink receive quality for AMR-HR Threshold ......................................2-2302
2.61.6 Uplink receive quality for AMR-HR Value N .........................................2-2303
2.61.7 Uplink receive quality for AMR-HR Value P .........................................2-2304
LXIII
SJ-20130408140048-016|2013-07-17(R1.0)
2.61.8 Downlink receive quality for AMR-FR Threshold ..................................2-2305

2.61.9 Downlink receive quality for AMR-FR Value N .....................................2-2306
2.61.10 Downlink receive quality for AMR-FR Value P....................................2-2307
2.61.11 Downlink receive quality for AMR-HR Threshold ................................2-2308
2.61.12 Downlink receive quality for AMR-HR Value N ...................................2-2309
2.61.13 Downlink receive quality for AMR-HR Value P ...................................2-2310
2.61.14 Uplink receive level for AMR-FR Threshold ....................................... 2-2311
2.61.15 Uplink receive level for AMR-FR Value N ..........................................2-2312
2.61.16 Uplink receive level for AMR-FR Value P...........................................2-2313
2.61.17 Uplink receive level for AMR-HR Threshold .......................................2-2314
2.61.18 Uplink receive level for AMR-HR Value N ..........................................2-2315
2.61.19 Uplink receive level for AMR-HR Value P ..........................................2-2316
2.61.20 Downlink receive level for AMR-FR Threshold ...................................2-2317
2.61.21 Downlink receive level for AMR-FR Value N ......................................2-2318
2.61.22 Downlink receive level for AMR-FR Value P ......................................2-2319
2.61.23 Downlink receive level for AMR-HR Threshold...................................2-2320
2.61.24 Downlink receive level for AMR-HR Value N......................................2-2321
2.61.25 Downlink receive level for AMR-HR Value P ......................................2-2322
2.62 Power Optimize...........................................................................................2-2323
2.62.1 Quality threshold of Assignment DownLink Power Optimize .................2-2323
2.62.2 Assignment UpLink Power Optimize with Quality .................................2-2324
2.62.3 Assignment DownLink Power Optimize with Quality.............................2-2325
2.62.4 Quality threshold of Assignment UpLink Power Optimize .....................2-2326
2.63 FH Handover Control...................................................................................2-2327
2.63.1 The downlink quality of HR to FR load HO ..........................................2-2327
2.63.2 The downlink quality of FR to HR load HO ..........................................2-2328
2.63.3 The downlink quality low threshold of HR(V1) to FR quality HO ............2-2329
2.63.4 The downlink quality high threshold of HR(V1) to FR quality HO ...........2-2330
2.63.5 The downlink level of HR to FR quality HO ..........................................2-2331
2.63.6 The downlink level of HR to FR load HO .............................................2-2332
2.63.7 The downlink level of FR to HR load HO .............................................2-2333
2.63.8 The uplink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2334
2.63.9 The uplink quality of HR to FR load HO...............................................2-2335
2.63.10 The uplink quality High threshold of HR(V1) to FR quality HO.............2-2336
2.63.11 The uplink level of HR to FR quality HO ............................................2-2337
2.63.12 The uplink level of HR to FR load HO................................................2-2338
2.63.13 The uplink level of FR to HR load HO................................................2-2339
LXIV
SJ-20130408140048-016|2013-07-17(R1.0)
2.63.14 The downlink receive quality low threshold of HR(V3) to FR quality

HO....................................................................................................2-2340
2.63.15 The downlink receive quality high threshold of HR(V3) to FR quality
HO....................................................................................................2-2341
2.63.16 The load of HO from HR(V3) to FR ..................................................2-2342
2.63.17 The load of HO from HR(V1) to FR ..................................................2-2343
2.64 Cell Option Configuration .............................................................................2-2344
2.64.1 Optimize pending block in downlink transfer state................................2-2344
2.64.2 Optimize dummy block in downlink delay state ....................................2-2345
2.64.3 Times of interval that send downlink dummy block ...............................2-2346
LXV
SJ-20130408140048-016|2013-07-17(R1.0)
LXVI
SJ-20130408140048-016|2013-07-17(R1.0)
About This Manual

Purpose
This manual describes the radio parameters of ZXUR 9000 GSM to help users in
configuring radio parameters for ZXUR 9000 GSM.
Intended Audience
l
l
Network management engineers

Maintenance engineers
What Is in This Manual

This manual contains the following chapters:
Chapter
Overview
1, User Guideline
Describes how to use this manual.
2, Radio Parameters
Describes the radio parameters of ZXUR 9000

GSM.
I
SJ-20130408140048-016|2013-07-17(R1.0)
II
SJ-20130408140048-016|2013-07-17(R1.0)
Chapter 1
User Guideline
ZXUR 9000 GSM ground parameters should be configured according to actual networking
plan.
A parameter table template is shown in Table 1-1. The parameter description in this manual
is based on the following template.
Table 1-1 How to Read Parameter Table
Ground Parameter Name
Parameter's GUI Name
The name of the parameter shown on user

interface
Parameter's Logical Name
The abbreviated name of the parameter
Managed Object
The managed object which the parameter

belongs to
Data Item Description
Parameter Description
The detail description of the parameter
Reference Protocol
The reference protocol related to the parameter
Related FD
The related features of the parameter
Unit
Parameter unit
Type
The data type of the parameter includes string,

long, long[], int[] and short[], the punctuation "[]"
stands for a array
Range
The value range of the parameter, [x..y] stands

for a continuity interval, {x,y,z} stands an enum,
{x,y,[a..b]} stands for a combined value range
Step
The modification step of the parameter
Default Value
The default value of the parameter
Parameter Value Description
The detail description of the parameter's value
Service or Node Impact
Whether the modification on the parameter

impacts the radio service
How to Impact
How to impact the radio service if modified the

parameters
Modification Methods
How to access the parameter to be modified
Effects of Modification
Describe the effects of modifying the parameter

1-1
SJ-20130408140048-016|2013-07-17(R1.0)
ZXUR 9000 GSM Radio Parameters Reference
Automatically Generated by OMC and Generating
Describe the value of parameter whether
Methods
generated by OMC and generating Methods
1-2
SJ-20130408140048-016|2013-07-17(R1.0)
Chapter 2
GSM Radio Parameters

Table of Contents
GSM Logical Configuration (GBssFunction) ...............................................................2-2
BSS Function Timer (GBssFunctionTimer) .............................................................2-179
BSS Function Handover Control (GBssHandoverControl) ......................................2-251
eMLPP Configuration (GBssEmlpp) .......................................................................2-280
eMLPP User Priority Configuration (GEmlppUserPriority).......................................2-298
BSS Function PS (GBssFunctionPS)......................................................................2-318
Common Measure and Information Exchange (GCommMeas) ...............................2-418
BSC Precise Paging Configuration (GBssPrecisePaging).......................................2-437
BSC Reserved Configuration (GBssFunctionRsv) ..................................................2-446
External GSM Cell Configuration (GExternalGsmCell)............................................2-465
External UTRAN FDD Cell Configuration (GExternalUtranCellFDD) .......................2-503
External UTRAN TDD Cell Configuration (GExternalUtranCellTDDLcr) ..................2-514
External E-UTRAN FDD Cell Configuration (GExternalEutranCellFDD)..................2-527
External UTRAN FDD Cell CRRM Configuration (GCrrmNCellLdFDD)...................2-536
External UTRAN TDD Cell CRRM Configuration (GCrrmNCellLdTDDLcr) ..............2-559
External E-UTRAN TDD Cell Configuration (GExternalEutranCellTDD)..................2-582
GSM Cell Configuration (GGsmCell) ......................................................................2-592
Cell Precise Paging Configuration (GCellPrecisePaging)........................................2-792
Location Area (GLocationArea) ..............................................................................2-797
Routing Area (GRoutingArea).................................................................................2-802
AMR Configuration (GCellAmr) ..............................................................................2-804
Frequency Hopping System (GHoppingFrequency)................................................2-894
Baseband Hopping System (GHoppingBaseband) .................................................2-898
Handover Control (GHandoverControl)...................................................................2-902
SDCCH Handover Control (GSdHandoverControl) ............................................... 2-1118
VAMOS Configuration (GVamos)..........................................................................2-1206
UTRAN Measurement (GUtranMeasure) ..............................................................2-1247
E-UTRAN Measurement (GEutranMeasure).........................................................2-1323
UTRAN Handover Control (GUtranHandoverControl) ...........................................2-1360
Site (GBtsSiteManager)........................................................................................2-1406
Site baseband share Configuration (GSiteBaseBandShare) .................................2-1421
Bvc (GBvc)...........................................................................................................2-1427
GPRS Configuration (GCellPs).............................................................................2-1430
PS Channel Schedule Configuration (GPsChannelSchedule)...............................2-1508
GPRS-EDGE Schedule Configuration (GGprsEdgeSchedule)..............................2-1524
NACC Configuration (GNACC) .............................................................................2-1532
NC2 Configuration (GCellPsNc2) .........................................................................2-1537
2-1
SJ-20130408140048-016|2013-07-17(R1.0)
DTM Configuration (GDTM)..................................................................................2-1639

PS Power Control (GPsPowerControl) .................................................................2-1643
EDGE Configuration (GCellEdge).........................................................................2-1729
Enhanced EDGE Configuration (GEhancedEdge) ................................................2-1748
Serving Cell CRRM Configuration (GCrrmCellLd).................................................2-1760
SubCell (GSubCell) ..............................................................................................2-1778
Subcell Handover Control (GScHandoverControl) ................................................2-1781
SubCell PS Channel Allocation Configuration (GSubCellPsAlloc).........................2-1825
Power Control (GPowerControl) ...........................................................................2-1844
Power Share (GPwShare) ....................................................................................2-1956
PS Handover Control (GPsHandoverControl) .......................................................2-1966
Trx (GTrx).............................................................................................................2-2047
Ts (GTs) ...............................................................................................................2-2066
Adjacent GSM Cell Configuration (GGsmRelation) ...............................................2-2079
Interfere Gsm Cell Configuration (GGsmIntfRelation) ...........................................2-2159
Visit Paging Cell (GGsmVpcRelation)...................................................................2-2162
Adjacent UTRAN Cell Configuration (GUtranRelation)..........................................2-2165
Adjacent E-UTRAN Cell Configuration (GEutranRelation) ....................................2-2183
User and Service Resource Schedule (GUserAndSrvBasedSche) .......................2-2192
User Priority and Service Type Configuration (GPsUserAndSrvType) ...................2-2197
Cell Reserved Configuration (GCellRsv)...............................................................2-2205
Priority-based Resel Configuration (GPriorityResel) .............................................2-2223
BSC Um Soft Synchronous Configuration (GUmsyn)............................................2-2258
AMR Handover Control (GAmrHandoverControl) .................................................2-2298
Power Optimize....................................................................................................2-2323
FH Handover Control ...........................................................................................2-2327
Cell Option Configuration .....................................................................................2-2344
2.1 GSM Logical Configuration (GBssFunction)

2.1.1 User Label
Full Name
User Label
Abbreviation
userLabel
Managed Object
GSM Logical Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
User Label
Instance
None
Value Range and Step
80 char
Unit
N/A
2-2
SJ-20130408140048-016|2013-07-17(R1.0)
Chapter 2 GSM Radio Parameters
Default Value
N/A
Default Value
Configuration Reason
None
Configuration Rule and

Adjustment Suggestion
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.2 BSS ID
Full Name
BSS ID
Abbreviation
GBssFunction
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
BSS ID
Instance
None
1..4095
Unit
N/A
Default Value
N/A
Default Value
None

None
2-3
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.3 Managed Object Description

Full Name
Managed Object Description
Abbreviation
description
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Managed Object Description
Instance
None
None
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-4
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.4 BSC Sequence

Full Name
BSC Sequence
Abbreviation
GBssFunctionSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC Sequence
Instance
None
1..4095
Unit
N/A
Default Value
N/A
Default Value
Set this parameter based on the on-site planning.

This parameter is configured on the basis of on-site planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-5
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.5 Load indication allowed

Full Name
Load indication allowed
Abbreviation
LoadInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The load indication process informs the adjacent BSCs about the load at
the cell border, thus providing more information as references in both
normal handover and the intra-BSC traffic handover.
This parameter determines whether load indication is allowed, and the
validity of parameter Load indication valid time and Load indication
period.
If this parameter is set to 0 (Not send load indication), the latter two
Description
parameters are invalid.
Instance
BSC
0: Not Send Load Indication
1: Send Load Indication Periodically
2: Send Load Indication When Congestion
Unit
N/A
Default Value
Default Value
The functional Switch, default: close
This switch can be enabled upon request. Otherwise,
it should be disabled.
Change Mode
Offline
Related features
ZGO-02-02-007 Traffic Based Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
0
2-6
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.6 Load indication Valid Time

Full Name
Load indication Valid Time
Abbreviation
LoadValidTime
Managed Object
3GPP Name
Time indication IE
3GPP Reference
3GPP TS 48.008
During load indication, the BSC sends the BSSAP LOAD INDICATION
message to MSC periodically to inform the MSC about the load status.
The message includes the time indication information, which indicates
the valid time period of the service load information.
MSC relays the information in the BSSAP LOAD INDICATION message
to neighboring BSCs.
This parameter represents the valid time length of the load message.
Description
The value 255 indicates permanent validity.
Instance
BSC
1..255
Unit
10s
Default Value
18
Default Value
Due to the practical application of the net

Generally, you do not have to modify this parameter
and the default value is recommended. If the parameter value is too
large, the MSC regards that the current load has a long valid period,
which cannot reflect the actual load variation of the BSC. If the
parameter value is too small, the reported load information becomes
invalid in a short time.
Change Mode
Offline
Related features
ZGB-03-04-001 BSC Load Control
Related Parameters
N/A
2-7
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.7 Load Indication Period

Full Name
Load Indication Period
Abbreviation
LoadIndPrd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
During load indication, the BSC sends the BSSAP LOAD INDICATION
message to MSC periodically to inform the MSC about the load status.
The message includes the time indication information, which indicates
the valid time period of the service load information.
The MSC then sends the BSSAP LOAD INDICATION message to
neighboring BSCs.
When the load indication message is sent periodically, this parameter
Description
decides the period for the BSC to send the load indication message.
Instance
BSC
10..65530
Unit
100ms
Default Value
1500
Default Value
2-8
SJ-20130408140048-016|2013-07-17(R1.0)
Generally, you do not have to modify this parameter

and the default value is recommended. If the parameter value is too
large, the load indication message cannot accurately reflect the load
variation of the BSC. If the parameter value is too small, the frequent
reporting of the load indication message will cause the waste of signalling
link resources.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.8 Send assignment failure allowed in outer direct retry

procedure
Full Name
Send assignment failure allowed in outer direct retry procedure
Abbreviation
ExDRSendAssFail
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the Assignment Failure message is
allowed to be sent to the MSC if the external directed retry procedure
fails.
0: the Assignment Failure message is NOT allowed to be sent
Description
1: the Assignment Failure message is allowed to be sent
Instance
BSC
0: Off
1: On
Unit
N/A
2-9
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
0
Enabling this switch will increase the count of assignment failures
Default Value
because the MS will still attempt directed retries after the assignment
failure message is sent. Besides, some MSCs do not support the
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.
Enabling this switch will increase the count of assignment failures

because the MS will still attempt directed retries after the assignment
failure message is sent. Besides, some MSCs do not support the
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.
Change Mode
Offline
Related features
ZGB-03-01-002 Directed Retry
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.9 TFO Enable

Full Name
TFO Enable
Abbreviation
TFOControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-10
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is one of TFO control parameters. It decides whether

TFO is enabled.
0: disable
1: enable
When TFO is disabled, i.e., TFOControl_0 is set to 0, other related
functions are also disabled, i.e. the values of TFOControl_1,
TFOControl_2 and TFOControl_3 are 0.
TFO is an inband protocol. The TC on both sides uses this protocol to
negotiate the coding and decoding after a call is set up. The sender
decoder and receiver coder are bypassed.
The voice frame used over the air interface is directly sent to the receiver
to improve voice quality.
If the speech version supported by the cell is not AMR, you can set up
TF0 if the speech versions
supported by two cells are same. If speech version is AMR, TFO can
be set up only if the supported speech coding and decoding types are
the same. Otherwise, TFO cannot be set up.
If IPA is configured, the speech coding negotiation is performed on the
Description
CN side.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Enable this switch when TFO support is required.
It is recommended to enable TFO in scenarios requiring high voice
quality because TFO can improve the voice MOS.
Change Mode
Offline
Related features
ZGO-04-02-006 TFO
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-11
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.10 Report voice quality

Full Name
Report voice quality
Abbreviation
VoiceQualityReport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether the BTS adds the speech quality related
parameters in the measurement report, preprocessing of measurement
Description
report, and preprocessing of enhanced measurement report.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
It is not a basic function and disabled by default.

This parameter is enabled as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-12
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.1.11 R99 Ind

Full Name
R99 Ind
Abbreviation
R99Ind
Managed Object
3GPP Name
None
3GPP Reference
3GPP TS23.060
It indicates R99 protocol version ID. BSS determines whether to encode/decode message fields added in the R99 version for the protocol
Description
according to this parameter.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Consider CN's implemtation and MS's capability
The CN and the MS are required to be of releases
later than R99.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-13
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.12 DCS1800/PCS1900 support

Full Name
DCS1800/PCS1900 support
Abbreviation
FuncExt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the supported frequency band. If you select
DCS1800, the DCS1800 frequency band will be supported. If you select
PCS1900, the PCS1900 frequency band will be supported. This param-
Description
eter cannot be modified after you select a frequency band.
Instance
BSC
0: DCS1800
1: PCS1900
Unit
N/A
Default Value
Default Value
DCS1800 is a commonly-used frequency band.
You can set this parameter according to the
actual frequency band planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-14
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.13 External cell load notify

Full Name
External cell load notify
Abbreviation
NotifyOutCellLoad
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to include the load information of the
local cell into the information element "Old BSS to New BSS Information"
when the traffic of the cell under the current BSC is handed over to a cell
Description
under another BSC.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
Generally, the default value is recommended.
However, you can enable this function if necessary.
Change Mode
Offline
Related features
ZGB-03-03-003 LAPD Cluster
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-15
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.14 Neighbor cell load valid duration

Full Name
Neighbor cell load valid duration
Abbreviation
AdjCellLoadLife
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the validity period of a neighbor cell's load infor-
Description
mation.
Instance
BSC
1..255
Unit
10s
Default Value
Default Value


If the parameter value is too large, the neighbor cell deems that
the load information has a long validity period, which cannot reflect
the actual load information in time. If the parameter value is too
small, the load information will be reported frequently.
Change Mode
Offline
Related features
ZGB-03-03-003 LAPD Cluster
Related Parameters
NotifyOutCellLoad
Relationship
This parameter is valid only when the switch NotifyOutCellLoad is

enabled.
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-16
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.15 Pre-Access Control for IP Transmission

Full Name
Pre-Access Control for IP Transmission
Abbreviation
IPAbisFilter
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Pre-access control switch for IP Transmission at the Abis interface.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The newly added limitations of the adjacent cell is selected for handover,
to avoid improper handover.

This parameter is disabled by default and adjusted in actual use.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.16 Using load information provided by CRRM

Full Name
Using load information provided by CRRM
Abbreviation
LoadClassScrPath
Managed Object

2-17
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to use the Load information provided
Description
by CRRM for handover decision.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The load is obtained more accurately during low traffic.
Loads are obtained through CRRM mode, so it is not recommended
to modify the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.17 Automatic Resource Indication Threshold

Full Name
Automatic Resource Indication Threshold
Abbreviation
ResourceIndThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-18
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the threshold for the BSC to send a resource
indication to the MSC. The value indicates the ratio of the count of
current available channels to the count of total channels. If the current
available resources are fewer than the specified threshold, the BSC
sends a resource indication to the MSC, indicating the resource situation.
The resource indication procedure has four modes:
1. Automatic sending mode: Upon receiving the BSSAP RESOURCE
REQUEST message, the BSC returns a BSSAP RESOURCE
INDICATION message containing no resource information as response.
Afterwards, when the condition is met for automatic sending of resource
information, the BSC sends a BSSAP RESUORCE INDICATION
message to the MSC. The parameter Periodicity IE in the BSSAP
RESOURCE REQUEST message specifies the message sending
interval. If Periodicity IE is 0, the BSC neglects this value.
The condition for automatically sending resource information can be a
traffic threshold or the interval between two messages.
2. One-time mode: Upon receiving the BSSAP RESOURCE REQUEST
message, the BSC returns a BSSAP RESOURCE INDICATION
message containing the resource information. If the BSSAP RESOURCE
REQUEST message does not contain Extended Resource Indication
IE, the BSC stops sending return messages, and waits for the next
BSSAP RESOURCE REQUEST message. If the BSSAP RESOURCE
REQUEST message contains Extended Resource Indication IE, the
BSC follows the rule set by Subsequent Mode in the message, as in
mode 4. If the previous mode is 1 or 3, the BSC uses the previous
mode. Otherwise, mode 4 is used.
3. Periodicity mode: Upon receiving the BSSAP RESOURCE REQUEST
message containing the resource information, and then sends the
message periodically.
If Periodicity IE in the BSSAP RESOURCE REQUEST message is not
0, the sending period is the multiplication of Periodicity IE and 100 ms. If
the Periodicity IE is 0, the BSSAP RESOURCE REQUEST message is
considered incorrect.
4. Stop mode: Upon receiving the BSSAP RESOURCE REQUEST
message containing no resource information as response. Afterwards,
the BSC does not send any information about the cell resources to the
Description
MSC.
Instance
BSC
0..100
Unit
Default Value
30
2-19
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

The larger the parameter value is, the more easily the automatic resource
indication is triggered. The smaller the parameter value is, the more
difficultly the automatic resource indication is triggered.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.18 Access class parameter config select

Full Name
Access class parameter config select
Abbreviation
accconfigselect
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether to enable the user access control
based on the SIM card level and, if enabled, which set of access
control parameters is used. Four sets of access control parameters
are available.
0Disable the user access control function
1Enable the first set of ACC data as the user access control
parameters.
2Enable the second set of ACC data as the user access control
parameters.
3Enable the third set of ACC data as the user access control
Description
parameters.
2-20
SJ-20130408140048-016|2013-07-17(R1.0)
4Enable the fourth set of ACC data as the user access control
parameters.
Instance
BSC
0:Disable the user access control function
1:Enable the first ACC configuration data as user access control
parameters
2:Enable the second ACC configuration data as user access control
parameters
3:Enable the third ACC configuration data as user access control
parameters
4:Enable the fourth ACC configuration data as user access control
parameters
Unit
N/A
Default Value
Default Value
This is a special functional switch, which is disabled by default.

This parameter can be enabled upon request.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.19 First barred class

Full Name
First barred class
Abbreviation
firstbarredclass
Managed Object

2-21
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the first SIM card level which is forbidden for
access. This parameter uses ACC data for the user access control based
Description
on the SIM card level.
Instance
BSC
0..9
Unit
N/A
Default Value
[0,0,0,0]
Default Value
It is a manual flow-control parameter and is often modified manually.
The default value is set as starting from 0.

The value can be set in accordance with on-site conditions. Each SIM
card periodically performs barring on access , so the default value is
taken.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.20 Barred class windows

Full Name
Barred class windows
Abbreviation
barredclasswindows
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-22
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the number of SIM card levels which are forbidden for access. This parameter uses ACC data for the user access
Description
control based on the SIM card level.
Instance
BSC
1..10
Unit
N/A
Default Value
[1,1,1,1]
Default Value


The default value is set to only control level 1, to prevent too many users
from being influenced prior to manual modification.
The value can be set in accordance with on-site conditions. If it is
necessary to reinforce the control, uers can adjust the window size to a
larger size.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.21 Barred time step

Full Name
Barred time step
Abbreviation
barredtimestep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-23
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the period of time for forbidding the access of
subscribers of a certain SIM card level to avoid the occurrence that the
access of the same SIM card level is always forbidden when ACC parameters are valid. This parameter ensures that subscribers of different SIM
Description
card levels are forbidden in turn.
Instance
BSC
1..3600
Unit
N/A
Default Value
[30,30,30,30]
Default Value

The default value is set to 30 s, because this barred time has a little
impact on users, which is unlikely to bring about user complaints.
The value can be set in accordance with on-site conditions. It is
recommended not to adjust the sliding rate as too high, to prevent the
MS from being barred continuously for a long time, which influences

users on implementing services.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.22 Access Control

Full Name
Access Control
Abbreviation
accesscontrol
Managed Object
3GPP Name
Access Control Class
2-24
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 44.018
This parameter specifies the access priority classes which are forbidden
for access.
Each MS in GSM system has an access priority class (15 classes in all).
Class 10 is not used for access control as specified in the protocol.
Cn indicates users with class n (n= 0, 1, , 9, 11, , 15)
If Cn = 0, the MSs with class n are allowed to access the cell.
If Cn = 1, the MSs with class n are forbidden to access the cell.
This parameter is valid when UseCellAcc is set to 0. Otherwise, the
Description
AccessControl parameter at the cell level is used for access control.
Instance
BSC
0..1
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Default Value
Generally, all MSs are allowed to access the cell.
If you want the MSs of a priority to access
the cell, you should set Cn to 0. If not, you should set Cn to 1.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.23 Paging repeat number

Full Name
Paging repeat number
Abbreviation
PagRep
Managed Object

2-25
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies how many times a paging message will be
re-sent.
0: Not re-send
Description
1-4: The times of re-sending
Instance
BSC
0..4
Unit
N/A
Default Value
Default Value
The message is re-sent once.

The higher the value is, the more likely the
MS is to be paged. In this case, however, the load of the paging channel
will increase, so you should consider both the load of the paging
channel and the success rate of the paging when setting this parameter.
Change Mode
Offline
Related features
ZGB-02-01-001 Paging
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.24 Congestion Threshold for Send Load Indication

Full Name
Congestion Threshold for Send Load Indication
Abbreviation
LoadIndThs
Managed Object
3GPP Name
N/A
2-26
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter specifies the threshold for sending the load indication. If
the load of a cell administered by this BSC is higher than the value of this
parameter, the system initiates a load indication process, which informs
adjacent BSCs about the load of the cells at the border so that more ref-
Description
erences can be provided in normal handovers and intra-BSC handovers.
Instance
BSC
0..100
Unit
Default Value
100
Default Value
It is a functional parameter and is configured
to 100 (no load indication is initiated) by default.
Currently, this parameter is not used and need
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.615c
Parameter Modifying
Detail
New
2.1.25 Forbid Handover According to Resource Threshold of Load

Indication
Full Name
Forbid Handover According to Resource Threshold of Load Indication
Abbreviation
LoadForbidHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-27
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to prohibit handover to an external

Description
adjacent cell with the resource usage higher than that of load indication.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to "No" by default.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.615c
Parameter Modifying
Detail
New
2.1.26 Resource Threshold of Load Indication for Forbid Handover

Full Name
Resource Threshold of Load Indication for Forbid Handover
Abbreviation
LoadThsForbidHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the resource usage of an external adjacent cell is higher than the value
Description
of this parameter, the system does not trigger handover to the cell.
Instance
BSC
2-28
SJ-20130408140048-016|2013-07-17(R1.0)
0..100
Unit
Default Value
100
Default Value

to 100 by default, which indicates that handover to the external adjacent
cell initiating the load indication process is not prohibited.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.615c
Parameter Modifying
Detail
New
2.1.27 Force FACCH

Full Name
Force FACCH
Abbreviation
FacchOnly
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether the assignment uses the TCH/F as the
first priority when requesting a channel. If the parameter is set to Yes, the
settings of the cell parameters FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3 will not be used. Instead, the TCH/F will
Description
be used first.
Instance
BSC
2-29
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
By default, the cell-level switch is used.

In system control parameters, this parameter is not used as the first
priority.
The default value is recommended. If you want
to control the FACCH, you can use cell parameters.
Change Mode
Offline
Related features
ZGB-03-01-004 Immediate TCH Assignment
Related Parameters
facchCallEmgCall
facchCallPagResp
facchCallMo
facchCallCallReEst
If this parameter is set to Yes, the settings of the cell parameters
FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3
Relationship
will not be used. Instead, the TCH/F will be used first.

If the parameter is set to No, the system will decide whether to
use the TCH/F first according to the settings of the cell parameters
FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.28 Use system message method when MSC over loaded or

link blocked
Full Name
Use system message method when MSC over loaded or link blocked
Abbreviation
MscSysInfoFlc
Managed Object
2-30
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to use system messaging to carry out
flow control when all MSCs is overloaded (Flow control must be enabled
by the overload) or signalling points are congested.
Using system messaging refers to rejecting the access of some MSs
according to the parameter ACCN in system messages. Using FUC
refers to rejecting the access of some MSs according to the number of
Description
MSs that are randomly accessed to the RACH.
Instance
BSC
1: SystemInfo Method
0: FUC Method
Unit
N/A
Default Value
0
The FUC can initiate flow control according
Default Value
to the importance of services. When the MSCs are not heavily overload
or the signalling points are not heavily congested, the FUC-based
flow control has less effect on user satisfaction than the system
messaging-based flow control.
This parameter only affects MSC overloads and
signalling point congestions. As the most effective flow control method,

the system messaging-based flow control rejects the access of some

MSs or disables the access to the cell. The FUC-based flow control
rejects the access of MSs by access reason. The FUC-based flow
control
is recommended.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-31
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.1.29 Start system message method for CPU overload

Full Name
Start system message method for CPU overload
Abbreviation
CpuSysInfoFlc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to enable system messaging-based flow
control when the CPU usage of the CMP increases to the threshold of the
Description
system messaging-based flow control.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
It is recommended to use the FUC-based flow
control as a priority. This switch is disabled by default.

The parameters CpuSysInfoFlc and CpuFucFlc

only affect the CPU flow control. The CPU flow control can be achieved
by using the system messaging-based flow control along with the
FUC-based
flow control.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-32
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.1.30 Start FUC flow control for CPU overload

Full Name
Start FUC flow control for CPU overload
Abbreviation
CpuFucFlc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to enable FUC-based flow control when
the CPU usage of the CMP increases to the threshold of the FUC-based
Description
flow control.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
1
The FUC can initiate flow control according
Default Value
to the importance of services. When the CPU is not overloaded, the

FUC-based flow control has less effect on user satisfaction than the
system messaging-based flow control. Therefore, this parameter is
enabled by default.
The parameters CpuSysInfoFlc and CpuFucFlc

only affect the CPU flow control. The CPU flow control can be achieved
by using the system messaging-based flow control along with the
FUC-based
flow control.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-33
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.31 The maximum control level for MSC overload or link block
Full Name
The maximum control level for MSC overload or link block
Abbreviation
MscFlcMaxLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the highest flow control level when MSCs are
Description
overloaded or signalling points are congested.
Instance
BSC
0..10
Unit
N/A
Default Value
6
According to the default FUC threshold, setting
Default Value
the level to 6 can put about half traffic under flow control. If the
system load cannot be reduced, the problem possibly lies in system

capacity. In this case, non-FUC-based flow control is recommended.
You can set this parameter according to the

setting of the FUC-based flow control bitmap. The higher the value
is, the higher the level will be allowed for the flow control triggered
by MSC overloads or signalling point congestions. Similarly, lower
values correspond lower flow control levels.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-34
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.32 Start limit of system message method for CPU overload

Full Name
Start limit of system message method for CPU overload
Abbreviation
CpuSysInfoCtlCpu
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the CMP's CPU usage threshold that triggers the
system messaging-based flow control when being exceeded. That means
if the CPU usage exceeds the threshold and the parameter CpuSysInfoFlc
Description
is set to "Yes", the system messaging-based flow control will be enabled.
Instance
BSC
0..100
Unit
Default Value
65
Default Value
For the CMP, CPU usage of 65% or above is generally

considered to be high. In this case, you can selectively put some
services under flow control to avoid higher CPU usage.
"This parameter is valid when the parameter
CpuSysInfoFlc is enabled. Generally, the default value is recommended.
The higher the threshold is, the higher the CPU usage must be before
flow control is enabled. Setting an overhigh threshold is bad for

congestion relief in busy hours while setting a too low threshold
will result in early flow control and affect normal services.
Change Mode
Offline
Related features
Related Parameters
CPUSysInfoFlc
Relationship
This parameter is valid only when the switch

CPUSysInfoFlc is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
1
2-35
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.33 Start limit of FUC flow control for CPU overload

Full Name
Start limit of FUC flow control for CPU overload
Abbreviation
CpuFucCtlCpu
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the CMP's CPU usage threshold that triggers
the FUC-based flow control when being exceeded. That is to say, if the
CPU usage exceeds the threshold and the parameter CpuFucFlc is set to
Description
"Yes", the FUC-based flow control will be enabled.
Instance
BSC
0..100
Unit
Default Value
80
Default Value
For the CMP, CPU usage of 80% or above is generally

considered to be high. In this case, you should put some services
under flow control to avoid higher CPU usage.
This parameter is valid when the parameter
CpuFucFlc is enabled. Generally, the default value is recommended.
The higher the threshold is, the higher the CPU usage must be before
flow control is enabled. Setting an overhigh threshold is bad for

congestion relief in busy hours while setting a too low threshold
will result in early flow control and affect normal services.
Change Mode
Offline
Related features
Related Parameters
CPUFucFlc
Relationship
Related Interfaces
This parameter is valid only when the switch

CPUFucFlc is enabled.
N/A
2-36
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.34 B2 support AMR

Full Name
B2 support AMR
Abbreviation
V2TruSupportAmr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Whether the BTS 2.0 carrier on the BTSV2 site supports the AMR voice
algorithm decides whether the services on the carrier can use AMR voice
Description
coding.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This parameter should be configured according
to the actual carrier.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-37
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.35 Enable power dynamic sharing

Full Name
Enable power dynamic sharing
Abbreviation
pwrDynShareSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines if dynamic power sharing is enabled.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Enabling this function can increase the usage

of the BTS power resources by sharing the unused power of the carriers
that have small transmit power with the carriers that requires large
transmit power. In this way, the maximum transmit power of each carrier
is increased.
Change Mode
Offline
Related features
ZGO-04-01-007--Dynamic Power Sharing
Related Parameters
PwrDynShare
Relationship
This switch is valid only when the global power sharing switch and the
cell-level power sharing switch are both enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-38
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.36 Power congest delay

Full Name
Power congest delay
Abbreviation
PwrCongDelay
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the delay of power congestion. If the time
since the last congestion exceeds this threshold, the system cancels
Description
power freezing.
Instance
BSC
0..255
Unit
Default Value
30
Default Value
The value 30s can generally avoid frequent
power freezing and unfreezing.

If this parameter is configured to a small

value, power freezing and unfreezing will frequently occur. If this

parameter is configured to a large value, the system cannot quit the
congestion state in time, which has certain impact on the service
performance.
Change Mode
Offline
Related features
ZGO-04-01-007 Dynamic Power Sharing
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-39
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.37 Time interval of channel power adjustment based on power

dynamic sharing
Time interval of channel power adjustment based on power dynamic sharFull Name
ing
Abbreviation
ChannelPwrAdjItvl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
It indicates the interval of power adjustment control. It is used to prevent
from degraded performance due to too frequent power adjustment (such
as intra-cell handover and inter-cell handover).
Description
This parameter is supported from version 6.20.61.
Instance
BSC
5..255
Unit
Default Value
10
Default Value
Generally, an interval of 10s can effectively
prevent too frequent congestion control actions.

The default value is recommended. Reset this

parameter appropriately if intra-cell or inter-cell handover caused
by power and congestion control occurs frequently.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-40
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.38 If paging flow control due to high CPU

Full Name
If paging flow control due to high CPU
Abbreviation
cpupagingflc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to enable paging flow control when
Description
CPU usage is high.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

You can decide whether to enable this switch according to paging
messages
and CPU usage.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-41
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.1.39 CPU threshold of paging flow control

Full Name
CPU threshold of paging flow control
Abbreviation
CpuPagingCtlCpu
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the CPU usage threshold for initiating the
Description
paging flow control when the threshold is exceeded.
Instance
BSC
0..100
Unit
Default Value
80
Default Value
This is a special functional switch, which
is enabled by default.
You can decide whether to enable this switch
according to paging messages and CPU usage.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-42
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.40 Radio pre-access procedure switch

Full Name
Radio pre-access procedure switch
Abbreviation
RadioPreAccsFlag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Radio pre-access process switch for the CRRM.
0: Not perform radio pre-access determination procedure
1: Perform radio pre-access procedure and determine whether to
Description
perform handover with the current transmission resources.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
The synchronization to the platform and 3G loads is inaccurate, which
affects 2/3G handover.
The default value is disabled. If loads are properly synchronized to the
platform, it is recommened to adjust the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-43
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.41 Transport Pre-Access Flag

Full Name
Transport Pre-Access Flag
Abbreviation
TransPreAccsFlag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Transport resource pre-access process switch for the CRRM.
0: Not perform transport pre-access determination procedure
1: Perform transport pre-access procedure and determine whether to
Description
perform handover with the current transmission resources.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
The synchronization to the platform and 3G loads is inaccurate, which
affects 2/3G handover.
The default value is disabled. If loads are properly synchronized to the
platform, it is recommened to adjust the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-44
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.42 The switch of sending Immediate assign message and radio

channel activating synchronously
The switch of sending Immediate assign message and radio channel acFull Name
tivating synchronously
Abbreviation
SendImmAss
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a switch to enable the simultaneous sending of the
immediate assignment message and the channel activation message.
According to a general immediate assignment flow, the immediate
assignment message is sent after the channel activation message
and the channel activation acknowledgement message. When this
procedure is followed, the immediate assignment message may fail
after the channel activation message is sent and the channel activation
acknowledgement message is received if MS times out due to a long
transmission delay at Abis interface (for example, when a satellite
medium is used for transmission). Sending the immediate assignment
message and the channel activation message at the same time can
ensure the timely sending of the immediate assignment message,
improving the success rate of immediate assignment when the
Description
transmission delay at Abis interface is long.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
This switch is disabled by default. It is only enabled in special scenarios.

This switch can be enabled in the case of low success rate of immediate
assignment, which is caused by a long-delay transmission mode used at
Abis interface, for example, transmission over satellite.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis/UM
Impact on Equipment
0
2-45
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.43 FO report for CS

Full Name
FO report for CS
Abbreviation
FOOption1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
vation.
Instance
BSC
This parameter specifies whether to report the CS service failure obser-
0: No
1: Yes
Unit
N/A
Default Value
Default Value
It is only used for fault location and is disabled by default.
The default value is recommended if TDD cells
are configured in the network.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-46
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.611f
Parameter Modifying
Detail
New
2.1.44 FO report for PS

Full Name
FO report for PS
Abbreviation
FOOption2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether to report the PS service failure obser-
Description
vation.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.611f
Parameter Modifying
Detail
New
2-47
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.45 FO report for DBS

Full Name
FO report for DBS
Abbreviation
FOOption3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies whether to report the DBS failure observation.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.611f
Parameter Modifying
Detail
New
2.1.46 Inter BSC handover out on SDCCH permitted

Full Name
Inter BSC handover out on SDCCH permitted
Abbreviation
InterBscSdHoOut
Managed Object

2-48
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether inter-BSC handover on the SDCCH
is allowed. When the parameter value is 1 (yes), the target cell of a
handover on SDCCH can be an external cell. When the parameter value
Description
is 0, an external cell cannot be the target cell of a handover on SDCCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
0
The default value of this parameter is set
Default Value
to 0 due to the possibility that the MSC fails to appropriately process
handover on SDCCH because an inter-BSC handover needs a long time

to be completed and the BSC has a large coverage in many cases.
Generally, it is recommended to set the parameter

value to 0. The parameter value can be set to 1 when inter-cell handover

on SDCCH is necessary in some scenarios (for example, a scenario of
motorway) and the MSC has a good capability for processing handover
on SDCCH.
Change Mode
Offline
Related features
ZGO-02-02-004 SDCCH/SDCCH Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-49
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.47 The switch of connection and radio channel activating

synchronization
Full Name
The switch of connection and radio channel activating synchronization
Abbreviation
CallDelayCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether to allow simultaneous sending of
connection and channel activation commands.
At the Abis interface using E1 line for transport, the LAPD packet
generating has a long delay, which leads to long delay for message
interaction. When the BSC sends the connection command and
channel activation command to the BTS at the same time, the message
interaction delay can be reduced.
Description
For IP mode, the delay reduction is not obvious.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
Newly added switch. The default configuration
keeps the same with that of no switch.

If Abis interface adopts E1 transmission, it

is recommended to enable this switch, so as to reduce the delay of

message interaction , and the delay of radio access (about 100ms).
If the Abis interface adopts IP transmission, the delay is not reduced
obviously.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-50
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.48 Use BER to average quality

Full Name
Use BER to average quality
Abbreviation
RQavgUseBer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to use BER to calculate the average
quality.
If the parameter is set to 1 (Yes), it is required to convert the RQ degree
to the BER before calculating the average.
If the parameter is set to 0 (No), use the RQ degree directly for
Description
calculating the average.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

The calculation result when BER is used is
slightly different from that when the RQ level is directly used. It
is recommended to disable this switch if the handover success ratio

is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-51
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.49 Check IMSI when access

Full Name
Check IMSI when access
Abbreviation
CheckImsiWhenAccess
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to check IMSI during access.
For some MSs, when accessing the network again after call drop, the
BSC may detect the IMSI conflict from the IMSI contained in the initial
access information, and then sends CLEAR REQ to the MSC. In this
case, a call drop is recorded both at the A interface and inside the BSC.
If the IMSI conflict is not checked, the BSC does not send CLEAR REQ
to the MSC, and the BSC does not record a call drop. In this case, the
MSC initiates the release procedure after detecting the IMSI conflict.
Description
This will reduce the call drop records.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

This function is in conflict with IMSI signalling
tracing. If the signalling tracing is enabled, you can take the default
value and do not enable this function. Otherwise, in other cases,

you can enable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-52
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.50 Include BTS power in MR

Full Name
Include BTS power in MR
Abbreviation
MrIncludeBtsPwr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
MR.
Instance
BSC
This parameter specifies whether the BTS power field is contained in the
0: No
1: Yes
Unit
N/A
Default Value
Default Value
provide the BTS power or downlink path loss, and the MR analyzer
supports
When the operator requires that the MR must
this function, configure this parameter to "Yes".

When the operator requires that the MR must
provide the BTS power or downlink path loss, and the MR analyzer
supports
this function, configure this parameter to "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-53
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.1.51 Measurement Result Recording Interval in MSC Invoke Trace

Full Name
Measurement Result Recording Interval in MSC Invoke Trace
Abbreviation
MITMRRecInt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the interval for sending the measurement report
to the Abis interface when tracing tasks are invoked. One record of measurement report is sent when the number of received measurement report
Description
reaches the parameter value.
Instance
BSC
1..60
Unit
N/A
Default Value
60
Default Value
Only a few measurement reports are reported when tracing is invoked.

If more preprocessed measurement report samples are expected, set
this parameter to a small value on condition that the load requirement
is met.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-54
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.52 Preprocessed Measurement Result Recording Interval in

MSC Invoke Trace
Preprocessed Measurement Result Recording Interval in MSC Invoke
Full Name
Trace
Abbreviation
MITPrepMRRecInt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the interval for sending the preprocessed measurement report to the Abis interface when tracing tasks are invoked. One
record of pre-processed measurement report is sent when the number of
Description
received measurement report reaches the parameter value.
Instance
BSC
1..60
Unit
N/A
Default Value
15
Default Value
Only a few measurement reports are reported when tracing is invoked.

If more preprocessed measurement report samples are expected, set
this parameter to a small value on condition that the load requirement
is met.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-55
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.53 Enhanced and Preprocessde MR report

Full Name
Enhanced and Preprocessde MR report
Abbreviation
EnhanAndPrepMrRpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the enhanced and the pre-processed
measurement reports are reported. If this parameter is set to "Yes", the
TRACEID and a value (unit: ms) are attached to various measurement
Description
reports.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

By default, this function is disabled. It is

required to enable this function as required and when the MR analyzer
supports this function.
When the pre-processed or enhanced measurement
reports need to be reported to the MR and the MR analyzer supports
the analysis on these reports, enable this switch.
Change Mode
Offline
Related features
ZGO-06-01-005 Massive Measurement Report
Related Parameters
MrRptEnable
Relationship
The parameter is valid when R_BSC.MrRptEnable is set to Yes.
Related Interfaces
N/A
Impact on Equipment
2-56
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.54 Preferred speech version for FR

Full Name
Preferred speech version for FR
Abbreviation
preferSpeechVerFr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the preferred full-rate speech version in the CS
channel allocation. Full rate version1 refers to FR. Full rate version2 refers
Description
to EFR and version3 refers to AMR.
Instance
BSC
0:(Not Valid
1:Full rate speech version 1:GSM FR
2:Full rate speech version 2:GSM EFR
3:Full rate speech version 3:FR AMR
4:Full rate speech version 4:OFR AMR-WB
5:Full rate speech version 5:FR AMR-WB
Unit
N/A
Default Value
Default Value
To be decided by MSC
It is recommended to use the default value and allow the MSC to decide
the speech version unless otherwise necessary.
If you modify the default value, the new value will decide the speech
version.
Generally, ERF can provide the best voice quality and user satisfaction.
AMR enables the adaptive switching of coding rates. In poor channel
conditions, increasing the channel coding rate (increasing redundant
bits) and reducing the source (speech) coding rate can ensure the
2-57
SJ-20130408140048-016|2013-07-17(R1.0)
conversation quality. In good channel conditions, increasing the source

coding rate can improve the voice quality.
Change Mode
Offline
Related features
ZGB-01-01-001 Full Rate (FR) Speech Codec
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.55 Preferred speech version for HR

Full Name
Preferred speech version for HR
Abbreviation
preferSpeechVerHr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When implementing the CS channel allocation policy, describe the preferred half-rate speech version. Half-rate version 1 refers to HR, and ver-
Description
sion 3 for AMR.
Instance
BSC
0:Not Valid
1:Half rate speech version 1:GSM HR
3:Half rate speech version 3:HR AMR
4:Half rate speech version 4:OHR AMR-WB
Unit
N/A
Default Value
Default Value
To be decided by MSC
2-58
SJ-20130408140048-016|2013-07-17(R1.0)
It is recommended to use the default value and allow the MSC to decide
the speech version unless otherwise necessary.
If you modify the default value, the new value will decide the speech
version.
Generally, AMR enables the adaptive switching of coding rates. In
poor channel conditions, increasing the channel coding rate (increasing
redundant bits) and reducing the source (speech) coding rate can
ensure the conversation quality. In good channel conditions, increasing
the source coding rate can improve the voice quality.
Change Mode
Offline
Related features
ZGO-01-01-001 Half Rate
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.56 Dynamic HR support indication

Full Name
Dynamic HR support indication
Abbreviation
DynaHREnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether the BSC supports dynamic HR. The dynamic HR channel allocation function enables the network to allocate
full-rate or half-rate channels to MSs according to the traffic in the cell
when it allocate channels for the MSs. Allocating half-rate channels when
the channels in the cell are likely to be congested minimizes the duration
Description
of possible congestions in peak hours.
Instance
BSC
2-59
SJ-20130408140048-016|2013-07-17(R1.0)
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
When the user number is reach or exceed the cell capability, the switch
can be open to extend the cell capability.
Change Mode
Offline
Related features
ZGO-03-02-005--Dynamic Half Rate Allocation
Related Parameters
DynaHREnable
Relationship
Full-rate channels can be converted to half-rate channels only when the

BSC-level and cell-level DynaHREnable is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.57 HR channel fragment finishing support

Full Name
HR channel fragment finishing support
Abbreviation
HRDfragSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a switch to support the HR channel defragmentation
function and can be configured on both BSCs and cells. The HR channel
defragmentation function is enabled only when both BSC- and cell-level
switches are enabled and the proportion of the idle TCH/Fs in these cells is
not more than the threshold proportion of the TCH/Fs to the total available
Description
service channels in the cell where the defragmentation is enabled.
2-60
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value

Enabling the HR channel defragmentation function
in a cell where dynamic half rate is used can increase full-rate channels

and improve voice quality. Enabling the function on dynamic channels

can increase available PS channels. The function can be enabled as
needed. If it is enabled, the corresponding switch in cell parameters
must be enabled at the same time. In this case, more handovers will
occur in cells.
Change Mode
Offline
Related features
ZGO-03-02-004 HR Concentration
Related Parameters
HoIntraEnable
HRDfragSupport
Relationship
This function can be enabled only when HoIntraEnable and BSC- and
cell-level HRDfragSupport in the system control parameters are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.58 BCCH switch allowed

Full Name
BCCH switch allowed
Abbreviation
CanBcchExch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-61
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether dynamic BCCH switchover function is

enabled on the BSC. Another prerequisite of successful dynamic BCCH
Description
switchover in a cell is that this function is also enabled in the cell.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Enable this switch when the BCCH shift function
is required.
Change Mode
Offline
Related features
ZGO-03-04-001 Automatic BCCH Recovery
Related Parameters
CanBcchExch
Relationship
This parameter is valid only when the BSC-level CanBcchExch and

cell-level CanBcchExch are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.59 Dynamic configuration SDCCH

Full Name
Dynamic configuration SDCCH
Abbreviation
CanSdcchDyn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-62
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether dynamic SDCCH/TCH conversion is

enabled in the BSC. The network can dynamically perform conversions
between SDCCH and TCH when this function is enabled. Another prerequisite of successful dynamic DCCH/TCH conversion in a cell is that
Description
this function is also enabled in the cell.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The dynamic SDCCH/TCH conversion function of
the BSC cannot be enabled unless this switch is enabled.
Change Mode
Offline
Related features
ZGB-03-02-003 Dynamic Configuration of SDCCH
Related Parameters
CanSdcchDyn
Relationship
The dynamic SDCCH/TCH conversion function only takes effect when

the functional switch of the BSC and that of the cell are both enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.60 Scan SDCCH

Full Name
Scan SDCCH
Abbreviation
ScanSdcch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-63
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the period of scanning idle SDCCHs when the
dynamic SDCCH/TCH conversion function is enabled in a cell. After the
dynamic SDCCH/TCH conversion function is enabled in a network, the
network scans SDCCHs at the period specified by this parameter to find
the number of idle SDCCHs for determining whether to convert SDCCH
Description
back to TCH.
Instance
BSC
10..1000
Unit
100ms
Default Value
100
Default Value
Generally, a period of 10 seconds or so is

appropriate to scan SDCCHs for determining whether to convert SDCCH
back to TCH.
The default value is recommended. A larger
parameter indicates a longer scanning period. And correspondingly,
the conversion from SDCCH (which used to be converted from TCH) to

TCH needs longer time.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.61 Scan BCCH

Full Name
Scan BCCH
Abbreviation
ScanBcch
Managed Object
3GPP Name
N/A
2-64
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter specifies the period for scanning the availability of BCCH
TRX when the dynamic BCCH shift function is enabled in the cell. When
the dynamic BCCH shift function is enabled, the network will scan the
status of BCCH TRXs at the specified period and check whether the shift
criterion is fulfilled. This parameter can reflect the response time of a
Description
BCCH TRX failure.
Instance
BSC
600..9000
Unit
100ms
Default Value
3000
Default Value
A period of five minutes is appropriate, in

which the network can find the cell that needs a BCCH shift in a short
time and the system load will not be impacted.
It is recommended that the default value be
used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.62 BCCH starting delay

Full Name
BCCH starting delay
Abbreviation
BcchDelay
Managed Object
3GPP Name
N/A
2-65
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates the initial delay before a BCCH shift. The network will check the status of BCCH TRX when the timer expires. If a
Description
BCCH shift is needed, the network initiates a shift process.
Instance
BSC
20..1800
Unit
100ms
Default Value
1200
Default Value
A delay of two minutes can avoid a BCCH shift
triggered by a reset of TRU, or temporary block.
used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.63 BCCH finishing delay

Full Name
BCCH finishing delay
Abbreviation
ReBcchEx
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
It indicates delay time before finishing BCCH handover, BTS block message is received after timer is timeout or BTS block is failed select
Description
handover TRX to do handover.

2-66
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
20..1800
Unit
100ms
Default Value
1200
Default Value
Generally, the BSC can receive a success or

failure response after it sends a TRX block or unblock message to
the BTS.
used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.64 TCH->SDCCH limit

Full Name
TCH->SDCCH limit
Abbreviation
MinSdcch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold that triggers a TCH-to-SDCCH
conversion in a cell where SDCCH dynamic configuration is enabled.
When the number of idle SDCCHs is lower than this threshold, a TCH-
Description
to-SDCCH conversion is performed.
Instance
BSC
2..64
2-67
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
4
The default threshold is 4, that is, a dynamic
Default Value
SDCCH conversion is generally required when the number of idle
SDCCHs
is less than 4.

The default value is recommended.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.65 SDCCH->TCH delay

Full Name
SDCCH->TCH delay
Abbreviation
TimeToTch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used to enable dynamic SDCCH configuration function
in the cell. After TCH is dynamically converted to SDCCH channel and
SDCCH channel is idle, to prevent from frequent channel conversion, a
time limit will be added for the conversion from SDCCH channel to TCH
channel. During this limit, SDCCH channel cannot be converted to TCH
Description
channel.
Instance
BSC
2-68
SJ-20130408140048-016|2013-07-17(R1.0)
0..24
Unit
N/A
Default Value
0
The default value is 4. That is, SDCCH-to-TCH
Default Value
conversion is performed after two SDCCH scanning periods when

enough
idle SDCCHs are available, preventing frequent conversions between
SDCCH and TCH.
Set a larger value for this parameter if a
longer delay is wanted before SDCCH-to-TCH conversion. An
appropriate
parameter value is the sum of a multiple of 3 and the number 1.
Change Mode
Offline
Related features
Related Parameters
ScanSDCCH
TimeToTch is a step determining the delay before
Relationship
a SDCCH-to-TCH conversion. The actual delay time equals to

(TimeToTch/3+1)*ScanSDCCH.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.66 Minimum Tch reserved for dynamic SDCCH

Full Name
Minimum Tch reserved for dynamic SDCCH
Abbreviation
MinTch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-69
SJ-20130408140048-016|2013-07-17(R1.0)
If dynamic SD conversion is enabled, the conversion TCH->SDCCH requires to check the number of idle TCHs in the cell and No. 1 sub-cell. If
Description
the number is greater than MinTch, the switchover is allowed.
Instance
BSC
1..64
Unit
N/A
Default Value
Default Value
By default, the handover is performed only when the number of idle

TCH channels is greater than 4, to prevent the TCH service channel
from congestion.

Change Mode
Offline
Related features
Related Parameters
CanSDCCHDyn
Relationship
This parameter is valid only when the CanSDCCHDyn

switch is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.67
Full Name
Abbreviation
BHTESupp
Managed Object
2-70
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the base band hopping switch-over is
supported. This function is supported only when the all switches at the
BSC level and Cell level are all enabled. When a carrier of the base band
hopping group is in fault, the system will automatically move and keep the
Description
faulty frequency out of the group until it resumes.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This parameter is a switch for a function.
It is turned off by default.

Baseband frequency hopping switchover is an auxiliary O&M function

of baseband frequency hopping. In a system that is configured with

baseband frequency hopping, this function can prevent some failed
carriers from affecting all carriers in the frequency hopping group.
If you set this parameter to Yes, the function is enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
SupBBHopExChange
A cell supports the base band frequency hopping
Relationship
switch-over only when the switches in BSC level and cell level
parameters
are set "Yes".
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-71
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.68 The method of intelligent TRX poweroff

Full Name
The method of intelligent TRX poweroff
Abbreviation
powerCond
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the intelligent poweroff function is enabled, this parameter indicates
Description
the criterion for choosing a power-off carrier.
Instance
BSC
0: The Traffic of each line
1: The peak of busy channel ratio
Unit
N/A
Default Value
Default Value
Normally use The Traffic of each line to deside trx shutdown whether or
not.
Carrier poweroff affects the channel resources

of the cell. However, the traffic per channel does not reflect the
changes of these channel resources. Peak channel load can reflect
the occupancy of the channel resources. However, frequent poweron
and poweroff must be avoided.
Change Mode
Offline
Related features
ZGO-04-04-002--Load Dependent Intelligent TRX Shutdown
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-72
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.69 IBS shutdown limit

Full Name
IBS shutdown limit
Abbreviation
powerDownLimit
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the average traffic per channel in a cell is lower than the value of
this parameter, a carrier frequency is required to be closed in the cell, and
Description
the cell is added to the power-off cell list.
Instance
BSC
0..70
Unit
Default Value
30
Default Value
Generally, if the cell traffic is lower than 30%, the cell is idle and
intelligent carrier power-down can be performed.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.70 IBS powerup limit

Full Name
IBS powerup limit
Abbreviation
powerUpLimit
2-73
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the average traffic per channel in a cell is greater than the value
of this parameter, a carrier frequency is required to be powered on in the
Description
cell, and the cell is added to the power-on cell list.
Instance
BSC
0..90
Unit
Default Value
60
Default Value
Generally, if the cell traffic reaches 60%, the cell is busy and the carrier
needs to be powered up.
The default value is recommended. The value can be slightly adjusted
in accordance with on-site traffic.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.71 IBS powerover limit

Full Name
IBS powerover limit
Abbreviation
powerOverLmt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-74
SJ-20130408140048-016|2013-07-17(R1.0)
During channel request and handover decision, if the load of the cell or
Description
subcell exceeds the parameter value, the carrier is notified to power on.
Instance
BSC
70..95
Unit
Default Value
90
Default Value
Generally, if the cell traffic reaches 60%, the cell is very busy and the
carrier needs to be powered up emergently, to avoid congestion.
The default value is recommended. The value can be slightly adjusted
in accordance with on-site traffic.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.72 IBS power priority

Full Name
IBS power priority
Abbreviation
powerPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-75
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the sequence for intelligent carrier power-off.

Set the carrier priority and interference band class according to this parameter, and set different weights for the carrier priority and the interference band. The priority for carrier power-off or power-on is decided by
the value of the formula (Carrier priority * weight A + interference band *
Description
weight B), with consideration of the TRU operation mode and type.
Instance
BSC
1: Carrier priority>interference band
2: interference band>carrier priority
3: only as per interference band
4: only as per carrier priority
Unit
N/A
Default Value
Default Value
Generally, the priority of carriers is considered to be greater than that of
the interference frequency band, and can be adjusted at the background.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.73 BCCH forbidden TS merger time bitmap

Full Name
BCCH forbidden TS merger time bitmap
Abbreviation
bcchForbiddenBmp
Managed Object
3GPP Name
N/A
2-76
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter is a bit map used to specify whether time slot (TS) is for-
Description
bidden to be merged on the BCCH for different time.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Default Value
It is 0 by default. That is, all periods of time can be merged.

The value can be set in accordance with perforamce statistics on site.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.74 The master power control option of intelligent TRX poweroff

system
Full Name
The master power control option of intelligent TRX poweroff system
Abbreviation
MasterPwCtrlOp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-77
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies whether intelligent power-off is allowed after the

Description
main power is powered off.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This parameter is a functional switch, which
disabled by default.

Configure this parameter based on the telecom operator's requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.75 Baseband resource share support

Full Name
Baseband resource share support
Abbreviation
BasebandShare
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
resource sharing is enabled.
Instance
BSC
This parameter is a BSC-level switch used to specify whether baseband
2-78
SJ-20130408140048-016|2013-07-17(R1.0)
0: Off
1: On
Unit
N/A
Default Value
Default Value
the parameter is a feature switch, default value is No.
If the traffic distributes in tide mode, this
function can be enabled according to operator requirements.
Change Mode
Offline
Related features
ZGO-03-04-005 Baseband Resource Dynamic Sharing
Related Parameters
BaseBandShare
Relationship
This switch is a BSC-level and site-level switch.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.76 TRX Selection priority for baseband share

Full Name
TRX Selection priority for baseband share
Abbreviation
BBSharePri
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the carrier selection sequence for the sharing
Description
of baseband resources.
Instance
BSC
1..4
Unit
N/A
Default Value
2-79
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Baseband resources are prior to be allocated
for the carriers with high priority and low interference band.
Baseband resources are prior to be allocated
for the carriers with high priority and low interference band.
Change Mode
Offline
Related features
Related Parameters
BaseBandShare
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.77 Number of BA Ranges

Full Name
Number of BA Ranges
Abbreviation
rangeNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the number of BA ranges that can be monitored
Description
with priority by an idle MS during re-selection.
Instance
BSC
1..257
Unit
N/A
Default Value
Default Value
The default value needs to be adjusted in actual use.

The value should be set in accordance with on-site radio environment.
2-80
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.78 BA Range Lower

Full Name
BA Range Lower
Abbreviation
rangeLow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the upper threshold of channel number within
Description
each BA range monitored by an idle MS during re-selection.
Instance
BSC
0..124, 128..251, 512..885, 975..1023
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
rangeLow<=rangeHigh
2-81
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.79 BA Range Higher

Full Name
BA Range Higher
Abbreviation
rangeHigh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the lower threshold of channel number within
Description
each BA range monitored by an idle MS during re-selection.
Instance
BSC
0..124, 128..251, 512..885, 975..1023
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
rangeLow<=rangeHigh
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-82
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.80 If get Utran classmark information from UE

Full Name
If get Utran classmark information from UE
Abbreviation
GetUtranClass
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether BSC initiates a classmark request, asking the UE to report its UtranClassmark information after the UE performs
handover from 3G network to 2G network. During a handover from the 3G
network to the 2G network, it is possible that the handover request does
not contain the UEs UtranClassmark information, or contains improper
information. This would cause failures when the UE performs 2G->3G
Description
handover later.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The classmark request procedure increases the
system load, so the switch is off generally.

If the connected RNC sends a handover request

with incomplete or outdated information, which reduces the success
rate for 2G-to-3G handover, enabling the feature is necessary.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-83
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.1.81 IPA AMR start mode

Full Name
IPA AMR start mode
Abbreviation
IPAAmrStartMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the initial AMR rate when IPA is applied. When
IPA is applied, the ACS of AMR speech coding modes is specified by
the MSC, so the initial rate cannot be exactly decided. For this reason,
the default rate or the maximum rate is used as the initial rate, and this
applies when ACS is a rate set.
When this parameter is set to Default, the initial rate is coded according
to the default value specified in the protocol 45.009.
When one mode is used, the corresponding rate is used as the initial
coding mode.
When two or three modes are used, the lowest rate is used as the
initial coding mode.
When four modes are used, the second lowest rate is used as the initial
Description
coding mode.
Instance
BSC
0: Use the mode implicitly defined in 3GPP TS 45.009
1: Use the mode of Max rate
Unit
N/A
Default Value
Default Value

When the default initial rate is used, the

initial rate is a strong coding mode that applies to the cases in
which the radio signal quality is poor.
Generally, the default initial rate is recommended.
When the radio signal quality of the cell is good, you can use the
maximum rate as the initial rate.
2-84
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
ZGO-05-04-003 A over IP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interfaceAbis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.82 Send OVERLOAD message to MSC

Full Name
Send OVERLOAD message to MSC
Abbreviation
SendOverLoadToMSC
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Send OVERLOAD message to MSC
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Considering that the overload message may trigger flow control at the
MSC side, set it to No if not negotiated with the MSC.

Configure this parameter after negotiation with the MSC side and
consideration of any possible results. Also, the configuration needs
approval from the telecom operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-85
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.1.83 Use Load of Subcell1 as Load of Cell

Full Name
Use Load of Subcell1 as Load of Cell
Abbreviation
UseSC1Load
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If this parameter is set to 1 (yes), the load of the first subcell is used as
the whole cell load, and applied for neighbor cell sorting, traffic handover
decision.
If this parameter is set to 0 (No), the whole cell load is used, including
Description
the first and second subcell.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
1
The default value is set to 1, to avoid handover to the busy cell in the
Default Value
first subcell. Channel resources in the second subcell are adequate,
while channel resources in the first subcell are tight, so the entire cell
load is not high.

Set this parameter to 0 only when the first sub-cell has sufficient channel
resources, or the second sub-cell has a good coverage and configured
as the direct handover object.
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
2-86
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.1.84 Enough MS MR For Connection Failure After Handover

Full Name
Enough MS MR For Connection Failure After Handover
Abbreviation
MrCountForRlt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Upon receiving the Handover Complete message from the MS, the BSC
starts counting the MRs with L3 messages. If the count of MRs with L3
messages is not greater than the value of this parameter when the BSC
receives the Connection Failure message, a call drop occurs, and either
of the following two counters is incremented according to the source
cell of the handover:
Counter 1: Number of few MS MR received before connection failure
after handover from adjacent cell
Counter 2: Number of few MS MR received before connection failure
Description
after handover from adjacent 3G cell
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value
The default value is 3 measurements that occur in a short time. If the

default value is too large, calldrop may not occur immediately after
handover.
2-87
SJ-20130408140048-016|2013-07-17(R1.0)

Generally, this parameter needs no modification. Adjust this parameter if

particular statistictic is required after call drop data is obtained through
the signaling tracing tool.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.1.85 Ts Block Alarm Switch

Full Name
Ts Block Alarm Switch
Abbreviation
TsBlockAlarmSwitch
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter is a switch for raising the air interface timeslot blocking
Description
alarm.
Instance
BSC
0: close
1: open
Unit
N/A
Default Value
Default Value
This is a functional switch and is disabled by default.

None
Change Mode
Offline
2-88
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.86 BVC Block Alarm Switch

Full Name
BVC Block Alarm Switch
Abbreviation
BVCAlarmSwitch
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
The parameter is the switch for raising the BVC manual blocking alarm.
Instance
BSC
0: close
1: open
Unit
N/A
Default Value
Default Value

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-89
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.87 AMR full Active Codec Set(4.75kbps)

Full Name
AMR full Active Codec Set(4.75kbps)
Abbreviation
amrFullAcs1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies whether the ACS of AMR FR contains the
Description
4.75kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Use both high rate and low rate.

Generally, select both high rate and low rate. When the radio signal
quality in a cell is comparatively good, select high rate only. When the
radio signal quality in a cell are comparatively bad, select low rate only.
Change Mode
Offline
Related features
ZGO-01-01-003 Adaptive Multi-rate Codec(AMR)
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-90
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies whether the ACS of AMR FR contains the 5.15
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-91
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs3
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-92
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrFullAcs4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs5
2-93
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs6
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-94
SJ-20130408140048-016|2013-07-17(R1.0)
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs7
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
2-95
SJ-20130408140048-016|2013-07-17(R1.0)
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs8
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
2-96
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.95 AMR Half Active Codec Set(4.75kbps)

Full Name
AMR Half Active Codec Set(4.75kbps)
Abbreviation
amrHalfAcs1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies whether the ACS of AMR HR contains the 4.75
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Using both high rate and low rate is widely applicable.
2-97
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Change Mode

Offline
2-98
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs3
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
2-99
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-100
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs5
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-101
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.100 Thresholds of AMR FR 1

Full Name
Thresholds of AMR FR 1
Abbreviation
amrFrThresholds1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies the C/I threshold for reducing the AMR FR codec
Description
mode to 4.75kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
13
Default Value
The default value consists of the carrier-to-interference ratios required in
different AMR rates when the FER is 1%.
Generally, you do not have to adjust the setting
of this parameter unless the FER measured by the BTS exceeds 1%.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
2-102
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.15 kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
14
Default Value
Change Mode
Offline
Related features
2-103
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds3
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.9kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
15
2-104
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-105
SJ-20130408140048-016|2013-07-17(R1.0)
Description
mode to 6.7kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
17
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-106
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrFrThresholds5
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.4kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
18
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-107
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds6
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.95kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
2-108
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds7
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 10.2kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
23
Default Value
Change Mode
Offline
Related features
2-109
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.107 Thresholds of AMR HR 1

Full Name
Thresholds of AMR HR 1
Abbreviation
amrHrThresholds1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies the C/I threshold for reducing the AMR HR codec
Description
mode to 4.75kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
18
2-110
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The CIR when different AMR rates are at 1% FER, which is obtained
by system simulation
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.15kbps.
Instance
BSC
0..63
2-111
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds3
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.9kbps.
2-112
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
0..63
Unit
N/A
Default Value
23
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-113
SJ-20130408140048-016|2013-07-17(R1.0)
Description
mode to 6.7kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
26
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds5
Managed Object

2-114
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.4kbps.
Instance
BSC
0..63
Unit
N/A
Default Value
30
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.112 Hysteresis of AMR FR 1

Full Name
Hysteresis of AMR FR 1
2-115
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
amrFrHysteresis1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies C/I hysteresis for increasing the AMR HR codec
Description
mode from 4.75kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value
The default value keeps proper differences

among the thresholds of rate increases and decreases, avoiding frequent
adjustments and ensuring timely adjustments.
By checking the frequency of rate adjustments,

you can decide whether this parameter is set properly. When the rate
is adjusted too frequently, you can set the parameter to a higher
value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-116
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.15kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
2-117
SJ-20130408140048-016|2013-07-17(R1.0)
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis3
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.9kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
2-118
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 6.7kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
2-119
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis5
Managed Object
2-120
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.4kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
2-121
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis6
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.95kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis7
2-122
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis7
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 10.2kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
2-123
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.119 Hysteresis of AMR HR 1

Full Name
Hysteresis of AMR HR 1
Abbreviation
amrHrHysteresis1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter specifies C/I hysteresis for increasing the AMR FR codec
Description
mode from 4.75kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
2-124
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Determine whether the Hysteresis parameter value is appropriate by
observing the frequency of rate adjustments (for example, through
test analysis or by using the AMR rate monitoring tool). When rate
adjustment is frequently performed, set this parameter to a larger value.
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.15kbps.

2-125
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis3
2-126
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.9kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-127
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrHrHysteresis4
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 6.7kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-128
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis5
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.4kbps.
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
Relationship
N/A
Related Interfaces
N/A
2-129
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.124 Enable AMR FR noise control

Full Name
Enable AMR FR noise control
Abbreviation
amrFrNscb
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter specifies whether the AMR noise suppression on the
MS is disabled for the AMRFR speech version. The noise suppression
function on the MS keeps the speech quality by controlling the
background noise.
No: Noise control can be enabled.
Description
Yes: Noise control is disabled.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Enabling noise suppression can eliminate noise and improve voice
quality.
Generally, enable the noise suppression function. When speech voice is
degraded, pay attention to the parameter setting.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-130
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.125 AMR FR Initial codec mode

Full Name
AMR FR Initial codec mode
Abbreviation
amrFrIcm
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter indicates the initial speech codec mode of AMR FR
employs the mode specified by Startmode or the default initial codec
mode specified in protocol 45.009. The initial codec mode specified in
the protocol is described as follows:
1. When there is one codec mode, this mode is employed as the initial
mode.
2. When there are two or three codec modes, the lowest speed mode
is employed as the initial mode.
3. When there are four modes, the mode with the second lowest speed
For the A interface using IP, this parameter is not used. Instead, the
system control parameter IpaAMRStartMode decides the initial codec
Description
mode.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Set the initial codec mode as required
If initial rate needs no special consideration, set this parameter to Start
Coding Mode", meaning the default initial rate specified in the protocol.
Change Mode
Offline
Related features

2-131
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.126 AMR FR Start mode

Full Name
AMR FR Start mode
Abbreviation
amrFrStartMode
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter decides the initial codec mode for the AMR FR speech
version. The value must not be larger than the number of codec modes
contained in the ACS. The parameter values are described as follows:
1: the initial codec mode employs the one with the lowest speed
2: the initial codec mode employs the one with the second lowest speed
3: the initial codec mode employs the one with the third lowest speed
Description
4: the initial codec mode employs the one with the forth lowest speed
Instance
BSC
1..4
Unit
N/A
Default Value
Default Value
When radio signal quality in a cell is good, set this parameter to a higher
initial rate.
Change Mode
Offline
Related features
2-132
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFullAcs1
amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.127 Enable AMR HR noise control

Full Name
Enable AMR HR noise control
Abbreviation
amrHrNscb
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
MS is disabled for the AMRHR speech version. The noise suppression
background noise.
Description
Instance
BSC
0..1
Unit
N/A
Default Value
2-133
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
quality.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.128 AMR HR Initial codec mode

Full Name
AMR HR Initial codec mode
Abbreviation
amrHrIcm
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter indicates the initial speech codec mode of AMR HR
mode.
Description
mode.
2-134
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
If initial rate needs no special consideration, set this parameter to "Start
Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.129 AMR HR Start mode

Full Name
AMR HR Start mode
Abbreviation
amrHrStartMode
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter decides the initial codec mode for the AMR HR speech
Description
2-135
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
1..4
Unit
N/A
Default Value
Default Value
Using the lowest coding mode can ensure that comparatively good voice
quality can be provided in bad radio condition.
If the radio quality is good, use a higher initial rate to improve the voice
quality.
Change Mode
Offline
Related features
Related Parameters
amrHalfAcs1
amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
amrHrIcm
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.130 Hysteresis of AMRWFS 1

Full Name
Hysteresis of AMRWFS 1
Abbreviation
amrWfsHysteresis1
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
2-136
SJ-20130408140048-016|2013-07-17(R1.0)
The hysteresis for changing AMRWFS mode includes four factors,

which are represented by four parameters: amrWfsHysteresis1,
amrWfsHysteresis2, amrWfsHysteresis3, and amrWfsHysteresis4.
The four parameter values must meet the following condition:
amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWfDescription
sThresholds4amrWfsHysteresis4
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
ZGO-01-01-004 Adaptive Multi-rate Codec Wideband (AMR-WB)
Related Parameters
N/A
Relationship

amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-137
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrWfsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrWfsHysteresis2amrWfsThresholds3amrWfsHysteresis3amrWf-
Description
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
2-138
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsHysteresis3
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
Description
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
2-139
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsHysteresis4
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
Description
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value

2-140
SJ-20130408140048-016|2013-07-17(R1.0)


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.134 Hysteresis of AMROWFS 1

Full Name
Hysteresis of AMROWFS 1
Abbreviation
amrOwfsHysteresis1
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
The hysteresis for changing AMROWFS mode includes two factors,
which are represented by two parameters: amrOwfsHysteresis1 and
amrOwfsHysteresis2.
The two parameter values must meet the following condition:
amrOwfsThresholds1amrOwfsHysteresis1amrOwfsThresholds2
Description
amrOwfsHysteresis2
Instance
BSC
2-141
SJ-20130408140048-016|2013-07-17(R1.0)
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
amrOwfsHysteresis2.
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwfsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
2-142
SJ-20130408140048-016|2013-07-17(R1.0)

amrOwfsHysteresis2.
Description
amrOwfsHysteresis2
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
amrOwfsHysteresis2.
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-143
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.136 Hysteresis of AMROWHS 1

Full Name
Hysteresis of AMROWHS 1
Abbreviation
amrOwhsHysteresis1
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
The hysteresis for changing AMROWHS mode includes two factors,
which are represented by two parameters: amrOwhsHysteresis1 and
amrOwhsHysteresis2.
amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description
amrOwhsHysteresis2
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
amrOwhsHysteresis2.
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
2-144
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsHysteresis2
Managed Object
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrOwhsHysteresis2.
Description
amrOwhsHysteresis2
Instance
BSC
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
amrOwhsHysteresis2.
amrOwhsHysteresis2
2-145
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.138 Thresholds for AMRWFS 1

Full Name
Thresholds for AMRWFS 1
Abbreviation
amrWfsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
There are four thresholds for changing AMRWFS mode, which
are represented by four parameters: amrWfsThresholds1,
amrWfsThresholds2, amrWfsThresholds3, and amrWfsThresholds4.
The four parameter values must meet the following two conditions:
(1) amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3amrWfsThresholds4
(2) amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2
Description
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
The default value consists of the carrier-to-interference
ratios required in different AMR rates when the FER is 1%.
Change Mode
Offline
Related features
Related Parameters
N/A
2-146
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
Description
Instance
BSC
0..63
Unit
N/A
2-147
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds3
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
2-148
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-149
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrWfsThresholds4
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
Description
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
Related Interfaces
Impact on Equipment
Impact on service
0
2-150
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.142 Thresholds for AMROWFS 1

Full Name
Thresholds for AMROWFS 1
Abbreviation
amrOwfsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
There are two thresholds for changing AMROWFS mode, which
are represented by two parameters: amrOwfsThresholds1 and
amrOwfsThresholds2.
The two parameter values must meet the following two conditions:
(1) amrOwfsThresholds1amrOwfsThresholds2
(2) amrOwfsThresholds1amrOwfsHysteresis1 amrOwfsThresholds2
Description
amrOwfsHysteresis2
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
2-151
SJ-20130408140048-016|2013-07-17(R1.0)

amrOwfsThresholds2.
Relationship
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwfsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
amrOwfsThresholds2.
Description
amrOwfsHysteresis2
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
2-152
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
amrOwfsThresholds2.
Relationship
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.144 Thresholds for AMROWHS 1

Full Name
Thresholds for AMROWHS 1
Abbreviation
amrOwhsThresholds1
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
There are two thresholds for changing AMROWHS mode, which
are represented by two parameters: amrOwhsThresholds1 and
amrOwhsThresholds2.
(1) amrOwhsThresholds1amrOwhsThresholds2
(2) amrOwhsThresholds1amrOwhsHysteresis1amrOwhsThresholds2
Description
amrOwhsHysteresis2
Instance
BSC
2-153
SJ-20130408140048-016|2013-07-17(R1.0)
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
amrOwhsThresholds2.
Relationship
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsThresholds2
Managed Object
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
2-154
SJ-20130408140048-016|2013-07-17(R1.0)

amrOwhsThresholds2.
Description
amrOwhsHysteresis2
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
amrOwhsThresholds2.
Relationship
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.1.146 Busy threshold of sub cell

Full Name
Busy threshold of sub cell

2-155
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
resLimitMove
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Channel reformation and migration is implemented by intra-cell handover
and temporarily occupies more cell channels. Only when the cell channel
use rate is lower than or equal to this parameter value, channle reforma-
Description
tion and migration can be performed.
Instance
BSC
40..100
Unit
N/A
Default Value
80
Default Value
N/A

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.147 Support of SON Transfer Application

Full Name
Support of SON Transfer Application
Abbreviation
SONTrans
Managed Object
2-156
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the BSC supports a SON transfer application. The parameter is used with the RIMSupport parameter. When
the SONTrans function is enabled, the RIMSupport function must also be
enabled. In this case, the BSC can reply to a request of acquiring GSM
cell loads from the external UTRAN or E-UTRAN network through a Gb
interface during the RAN Information Management (RIM) process, and
Description
synchronizes the loads to the external network.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Function enabled or disabled. The function is disabled by default.
The parameter is set in accordance with a network operation
requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
RIMSupport
SON Transfer and RIMSupport are set independently. If SON Transfer
Relationship
needs to be enabled, RIMSupport must also be enabled at the same

time. If not, SON Transfer is invalid.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.1.148 Circuit data handover control

Full Name
Circuit data handover control

2-157
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
CSDATAHOControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a handover is enabled during circuit
Description
data service.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The handover is enabled generally.

If the handover results in damage to CS data service, the function
should be disabled. The handover never occurs when CS data service
is performed.
Change Mode
Offline
Related features
N/A
Related Parameters
GHandoverControl.CSDATAHOControl
Relationship
The handover is performed when both the associated parameters are

set to Yes.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.1.149 Cell Bar when A break

Full Name
Cell Bar when A break
Abbreviation
CellSeleBarADown
Managed Object

2-158
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the affected cell notifies the related
MS of cell selection unavailable when the A interface is broken. The MS
after receiving the notification will select the other networks of the opera-
Description
tor, for example, a 3G/4G network.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The function is disabled if enabling the function is not required on site.

The function is enabled in accordance with an onsite requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.1.150 VAMOS II prior to pair with non saic UE

Full Name
VAMOS II prior to pair with non saic UE
Abbreviation
VamosIIPairPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-159
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter represents the pairing priority for VAMOS II mobile

phones.
If this parameter is set to 1, the system first pairs traditional mobile
phones. If there are no appropriate paring objects, the system will select
SAIC mobile phones (including MUTE SAIC and DARP2), VAMOSI
mobile phones, VAMOSII mobile phones, or SAIC AFC mobile phones.
If this parameter is set to 0, the system does not pair traditional mobile
phones first. Instead, the system will select SAIC mobile phones
(including MUTE SAIC and DARP2), VAMOSI mobile phones, VAMOSII
mobile phones, or SAIC AFC mobile phones. If there are no appropriate
Description
paring objects, the system will pair traditional mobile phones.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The antijamming capability of traditional mobile phones is the poorest.

Therefore, the priority of paring traditional mobile phones is set to the
lowest.
The parameter is modified only when the customer has special
requirements. Normally, the default value is recommended.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.1.151 Send Paging CS on CCCH or not when PS instance exists

Full Name
Send Paging CS on CCCH or not when PS instance exists

2-160
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
SendPacchCcch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
A CS paging is received in the PS service, if the paging coordination
function is enabled, the system will send a Paging CS message on the
PACCH channel. This parameter specifies whether to send the Paging
CS message also on the CCCH channel. If the paging coordination
function is disabled, this parameter specifies whether to send the Paging
CS message on the CCCH channel when a CS paging is received in
the PS service.
0: Do not send the Paging CS message on the CCCH channel.
Description
1: Send the Paging CS message on the CCCH channel.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the function switch is disabled.

If the function switch is enabled, it helps improve CS paging success
rate, but it may increase the number of messages at the radio interface.
In practical applications, whether the function switch is enabled depends

on the network operating requirement and network capability.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2-161
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.152 If support mute call detect

Full Name
If support mute call detect
Abbreviation
MuteCallDetSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter enables or disables unidirectional call detection. If this
function is enabled, the user plane will detect unidirectional calls and re-
Description
port necessary information to the back-end to facilitate fault location.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Normally, the function switch is disabled. It is enabled when the user
plane needs to detect problems.

This function can be enabled in application scenarios with a lot of

unidirectional calls. Maintenance personnel can locate the problem
through relevant messages.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2-162
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.153 P value of MUTE SAIC MS capability detection

Full Name
P value of MUTE SAIC MS capability detection
Abbreviation
MuteSaicDetNumP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Capability detection times P of MUTE SAIC MSs
Instance
BSC
10..65535
Unit
N/A
Default Value
800
Default Value
To ensure accurate and fast detection, it is recommended to set this
parameter to 80.
If the value is set too small, the determination conditions are easy to be
met, which causes inaccurate evaluation of MS capabilities. If the value is
set too large, the determination conditions are difficult to be met, which
causes hard recognition of MUTE SAIC MSs.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.154 N value of SAIC AFC MS capability detection

Full Name
N value of SAIC AFC MS capability detection
Abbreviation
SaicAfcDetNumN
2-163
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Capability detection times N of SAIC AFC MSs
Instance
BSC
10..65535
Unit
N/A
Default Value
1000
Default Value
parameter to 100.
If the value is set too small, there are few samples for determination,
which causes inaccurate determination result. If the value is set too large,
determination takes a long time, which affects the system performance

due to scrambling.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.155 N value of MUTE SAIC MS capability detection

Full Name
N value of MUTE SAIC MS capability detection
Abbreviation
MuteSaicDetNumN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-164
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Capability detection times N of MUTE SAIC MSs
Instance
BSC
10..65535
Unit
N/A
Default Value
1000
Default Value
parameter to 100.
If the value is set too small, there are few samples for determination,
which causes inaccurate determination result. If the value is set too large,
determination takes a long time, which affects the system performance

due to scrambling.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.156 Whether using Frequency List describe channel frequency

hopping of assignment command
whether using Frequency List describe channel frequency hopping of asFull Name
signment command
Abbreviation
AssUseFreqList
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-165
SJ-20130408140048-016|2013-07-17(R1.0)
When constructing an assignment command, the system fills in "MobileAllocationAT" or "FreqListAT" according the status of the AssUseFreqList switch
if the channel type is frequency hopping system. If the value of AssUseFreqList is 1, the system fills in "FreqListAT". Otherwise, the system fills in
Description
"MobileAllocationAT".
Instance
BSC
0:using mobile allocation, after time 1:using frequence list, after time
Unit
N/A
Default Value
Default Value
By default, the frequency list is not used.
Decides whether the assignment command uses the frequency list to
determine the parameter setting.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.157 P value of SAIC AFC MS capability detection

Full Name
P value of SAIC AFC MS capability detection
Abbreviation
SaicAfcDetNumP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Capability detection times P of SAIC AFC MSs
Instance
BSC
2-166
SJ-20130408140048-016|2013-07-17(R1.0)
10..65535
Unit
N/A
Default Value
800
Default Value
parameter to 80.
If the value is set too small, the determination conditions are easy to be
met, which causes inaccurate evaluation of MS capabilities. If the value is
set too large, the determination conditions are difficult to be met, which
causes hard recognition of SAIC AFC MSs.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.158 Allow assign according first measurement report when use

cobcch
Full Name
Allow assign according first measurement report when use cobcch
Abbreviation
CoBcchAssByOneMr
Managed Object
GSM Logical Configuration (GBssFunction)
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to assign a channel to subcell 2 directly
Description
according to the first measurement report when the Co-BCCH is used.
Instance
BSC
0:No
1:Yes
2-167
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
It is not necessary to enable this function but to hand over to subcell 2

by subsequent inter-subcell handovers if direct assignment to subcell
2 is not a must.
If this function is enabled when the Co-BCCH is used, pay attention to the
success rate of assignment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.159 Immediate assignment repeat

Full Name
Immediate assignment repeat
Abbreviation
ImmAssRep
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the maximum number of immediate assignment
message retransmissions. It can be set to 0 and 1. The value 0 indicates
that the immediate assignment message is not retransmitted, while 1 indi-
Description
cates that the message is retransmitted up to one time.
Instance
BSC
0..1
Unit
N/A
Default Value
1
2-168
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The immediate assignment message is retransmitted up to one time.
The enabling of this function contributes to the improvement in success
rate of immediate assignment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.160 Immediate assignment priority

Full Name
Immediate assignment priority
Abbreviation
ImmAssPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the priority of immediate assignment messages.
It can be set to 0 and 1. The value of 1 indicates a high priority to preempt
any PCH blocks. This parameter is invalid currently and is set to the fixed
Description
value of 1.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
The parameter is set to the fixed value of 1 by the base station.
2-169
SJ-20130408140048-016|2013-07-17(R1.0)

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.161 Switch of TRAU frame synchronized monitor

Full Name
Switch of TRAU frame synchronized monitor
Abbreviation
trauFraSynSupp
Managed Object
3GPP Name
3GPP TS 48.060, 3GPP TS 48.061
3GPP Reference
N/A
This parameter enable or disables notification reporting if the loss of TRAU
Description
frame synchronization lasts for a certain time period.
Instance
BSC
0:No
1:Yes
Unit
N/A
Default Value
Default Value
The BLER values ranging from 15% to 20% are considered acceptable
according to system simulation results. A BLER lower than 15% has a
positive influence on the rate.
To understand the loss of TRAU frame synchronization, enable this
parameter.
Change Mode
Offline
2-170
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
TuTrauSyn
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.162 Delay of TS forcible release

Full Name
Delay of TS forcible release
Abbreviation
TsRel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the delay in forced TS release by a service
process. During the handover of a dynamically configured SDCCH to a
TCH, the service on this TS is switched to any other one TS. After the timer
Description
expires, the service is released.
Instance
BSC
5..200
Unit
100ms
Default Value
100
Default Value
A service can generally be switched over successfully in 10 seconds.
Otherwise, it is released forcefully after the 10-second period.

Change Mode
Offline
Related features
ZGB-03-02-003 dynamic SDCCH configuration
Related Parameters
N/A
2-171
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
This parameter cannot be effective until the parameter CanSDCCHDyn

is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.163 Delay protection

Full Name
Delay protection
Abbreviation
MaxDelay
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter works as a delay protector. It specifies a response delay
time when a cell waits for a BTS to complete configuration if the dynamic
BCCH or SDCCH switchover is enabled and the dynamic switchover con-
Description
ditions are met. When the timer expires, the process restarts.
Instance
BSC
1200..2400
Unit
100 ms
Default Value
1800
Default Value
If no ACK or NACK message is received in three minutes, the process is
considered faulty and needs to restart.

Change Mode
Offline
ZGO-03-04-001 automatic BCCH switchover
Related features
ZGB-03-02-003 dynamic SDCCH configuration
Related Parameters
N/A
Relationship
N/A
2-172
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.164 DTMF Enable

Full Name
DTMF Enable
Abbreviation
DTMFEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables the DTMF function.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
This parameter is disabled by default because it is used only in some
specific fields, for example, Afghanistan.

Enabled as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

2-173
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.1.165 Max ta and measure report times in LCS

Full Name
Max ta and measure report times in LCS
Abbreviation
LcsMaxTaRequestNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the maximum number of TA and measurement
report requests when there is no measurement report information available
Description
in a location service TA response.
Instance
BSC
0..3
Unit
N/A
Default Value
1 in an interval of one second
Default Value
None
This parameter is set to 0 if the location center does not require a
measurement report in a TA response; otherwise, it ranges from 1 to 3.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
N/A
OMC Access Path
Parameter Modifying
Version
N/A
2-174
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.1.166 Reassign enable

Full Name
Reassign enable
Abbreviation
ReAssignEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables wireless reassignment for the BSC.
Instance
BSC
0:No 1:Yes
Unit
N/A
Default Value
Default Value
This parameter is disabled by default. It is enabled only when there are

any special demands on this function to improve the success rate of
assignment.
This parameter is enabled if a field requires a quite high success rate
of assignment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-175
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.167 Reassign level threshold

Full Name
Reassign level threshold
Abbreviation
ReAssignLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the level decision threshold for intra-cell directed
retry during reassignment. When the level of an adjacent cell is higher than
that of the serving cell and reaches the threshold, the intra-cell directed retry
Description
applies.
Instance
BSC
0..63
Unit
N/A
Default Value
5
A wireless reassignment process gives priority to intra-cell directed retry,
Default Value
which requires the level of an adjacent cell is higher than that of the
serving cell. An excessive level threshold may cause that the adjacent cell
satisfying intra-cell directed retry does not exist.
It is unnecessary to modify the default value in general. If the level of an
adjacent cell is higher than that of the serving cell, but the difference is
less than the default value, the threshold should be lowered slightly. If the
threshold is set too high or the level of adjacent cells is lower than that
of the serving cell, the wireless reassignment process will not perform
intra-cell directed retry, but reassign a serving cell immediately.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-176
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.168 Max times of reassign

Full Name
Max times of reassign
Abbreviation
ReAssignMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the maximum retry number for terminal access
by using a reassignment (normal assignment) or handover (directed retry)
command when the BSC receives a reassignment failure message during
Description
a reassignment.
Instance
BSC
1..5
Unit
N/A
Default Value
1
This parameter is disabled in general. When it is enabled, the
Default Value
reassignment process attempts to reassign one time by default. If the
success rate of reassignment is lower than the specified value, the

maximum retry number should be increased.

With the wireless reassignment enabled, if the success rate of

reassignment does not meet the requirements specified by the customer,
the maximum retry number should be increased.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-177
SJ-20130408140048-016|2013-07-17(R1.0)
2.1.169 Use Reserved Channel

Full Name
Use Reserved Channel
Abbreviation
USERESERVEDCHAN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a TS-based reserved channel is effec-
Description
tive. If it is set to 0, the parameter IsRsv is not effective.
Instance
BSC
0:No
1:Yes
Unit
N/A
Default Value
Default Value
Disabled by default as a characteristic functional switch
This parameter is enabled if it is necessary to assign a reserved channel
for a subscriber with a high priority.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
GTs.Isrsv
Relationship
The parameter IsRsv is not effective until this parameter is set to 1.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-178
SJ-20130408140048-016|2013-07-17(R1.0)
2.2 BSS Function Timer (GBssFunctionTimer)

2.2.1 BSS Function Timer ID
Full Name
BSS Function Timer ID
Abbreviation
GBssFunctionTimer
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
Description
BSS Function Timer ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->Global

Information Configuration->BSS Function Timer
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.2 Protective time waiting for access

Full Name
Protective time waiting for access

2-179
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
rmsT1
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is rmsT1 timer. It indicates protection waiting time for MS
access during assignment or handover, after channel activation process.
Timer start: The destination channel receives the CHL ACITIVATION
ACK message and sends the RADIO AVAILABLE message to the
source channel.
Timer stop: In MS access, the destination channel receives the
ASSIGNMENT COM or HANDOVER COM message.
Timeout action: the instance on target channel is released.
Description
This parameter is changed in V6.20.614b.
Instance
BSC
0..1001
Unit
100ms
Default Value
70
Default Value
Generally, the MS can be accessed in seven
seconds.
The default value is recommended. A too large
parameter value will cause long-time occupation of radio resources,
which results in the waste of resources. A too small parameter value

may increase the access failure rate.
Change Mode
Offline
Related features
N/A
Related Parameters
T3107
T3103
Relationship
For intra-cell handovers, RmsT1 (7s) > RmsT3107 (6s)

For inter-cell handovers, RmsT1 (7s) > RmsT3103 (6s)
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-180
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.2.3 Protection time for link establishment response

Full Name
Protection time for link establishment response
Abbreviation
rmsT3
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is T3 timer.
Timer start: RANCS instance sends "ESTABLISH IND" to RANA
instance.
Timer stop: RANCS instance receives the "CONNECT CONF" sent by
RANA instance, or the "CONNECT FAIL" when RANA fails to establish
the link.
Description
Timeout action: Release this service.
Instance
BSC
30..100
Unit
100ms
Default Value
60
Default Value
Generally, six seconds are enough for protection.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-181
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.4 SAPI3 link establishment time

Full Name
SAPI3 link establishment time
Abbreviation
rmsT6
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
Timer T6 supervises link establishment of SAPI3.
Timer start: timer T6 starts when BSC receives the DTAP (SAPI = 3)
message from MSC and there is no SAPI3 link.
Timer stop: timer T6 stops when BSC receives the ESTABLISH
CONFIRM message from BTS.
Overtime action: When timer T6 expires, the BSSMAP SAPI"n" REJECT
Description
message will be sent to MSC.
Instance
BSC
10..300
Unit
100ms
Default Value
100
Default Value
Generally, the ESTABLISH CONFIRM message can
be received from the BTS in 10 seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-182
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.5 Protective time that responses external handover completion

message
Full Name
Protective time that responses external handover completion message
Abbreviation
rmsT7
Managed Object
BSS Function Timer
3GPP Name
T7
3GPP Reference
3GPP TS 48.008
This parameter is timer rmsT7, used to calculate the protective time that
PO responds external handover completion message.
Timer start: it starts when RANCS sends the HANDOVER REQUIRED
message to MSC.
Timer stop: it stops when RANCS instance receives HANDOVER
COMMAND response from MSC.
Timeout action: clear the reason of channel request, record the number
of outgoing attempts and request failures, do penalty for target cell, and
Description
wait for handover decision to initiate handover.
Instance
BSC
50..200
Unit
100ms
Default Value
150
Default Value
Generally, an external handover can be completed
in 15 seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
2-183
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.6 External handover protective time

Full Name
External handover protective time
Abbreviation
rmsT8
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is timer rmsT8, monitoring external handover process.
Timer start: rmsT8 starts after handover command is sent in Serve state
while RANCS instance should be handed over to an external cell.
Timer stop: rmsT8 timer stops if RANCS instance receives HO
COMCLEAR CMD (handover success) or UM HO FAIL (handover failed).
Timeout action: Release the service.
Description
Instance
BSC
1..1000
Unit
100ms
Default Value
100
Default Value
Generally, an external handover can be completed
in 10 seconds.

The default value is recommended. If the external

handover success rate is low, increase the parameter value. However,
a too large parameter value will impact the user experience.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-184
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.7 Protective time for RF channel release

Full Name
Protective time for RF channel release
Abbreviation
rmsT9
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is T9 timer.
Timer start: T9 starts when RF CHANNEL RELEASE is sent to BTS
when RANCS instance is released.
Timer stop: T9 stops when RANCS instance receives RF CHANNEL
RELEASE ACKNOWLEDGE response from BTS.
Description
Timeout action: service instance is released.
Instance
BSC
10..50
Unit
100ms
Default Value
20
Default Value
BSC can receive the BTS acknowledge in 2 secs normally

The larger the parameter value is, the longer
the waiting time is, and the longer the time needed for service release
due to the occurrence of exception. This parameter is invalid now.

The RMST11 is set by the setting of Emlpp.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-185
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.8 Starting time for oriented retry

Full Name
Starting time for oriented retry
Abbreviation
rmsT10
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a timer used to wait for the start of directed retry. The
timer is started to wait for queuing, forced handover, and forced release
actions when the cell fails to assign an available channel. When the
timer expires, a directed retry process is initiated.
Start: The cell fails to assign an available channel.
Stop: An available channel resource is obtained after queuing, forced
handover, and forced release.
Description
At expiry: Initiate a directed retry.
Instance
BSC
50..150
Unit
100ms
Default Value
60
Default Value
Set the parameter value in consideration of
the time needed for queuing preemption.
Change Mode
Offline
Related features
ZGB-03-01-002 Directed_Retry
2-186
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.9 Encryption mode modification time

Full Name
Encryption mode modification time
Abbreviation
rmsT5
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is timer T5, used to supervise modification process of
encryption mode, that is, the timer that waits for MS response after
configuring radio encryption mode.
Timer Start: T5 timer starts when BSC receives CIPHER MODE
COMMAND message from MSC.
Timer Stop: T5 timer suspends when BSC receives CIPHER MODE
COMPLETE message from MS.
Overtime Action: If this timer is overtime, BSC will send BSSAP CIPHER
Description
MODE REJECT message to MSC.
Instance
BSC
30..120
Unit
100ms
Default Value
100
Default Value
Generally, the CIPHER MODE COMPLETE message
can be received from the MS in 10 seconds.


2-187
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.10 Mode modification process time

Full Name
Mode modification process time
Abbreviation
TModeModify
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is T13 timer. It supervises BTS and MS modes
modification process. Mode modification refers to modify channel mode.
When there is not SDCCH and FACCH is allocated, new channel is not
allocated after assignment, but modify the modes.
Timer start: When BSC sends the MODE MODIFY message to BTS
and sends the CHANNEL MODE MODIFY message to MS.
Timer stop: When BSC receives the MODE MODIFY ACK/NACK
message from BTS and the CHANNEL MODE MODIFY message from
MS.
Timeout action: If the timer is overtime, the BSC will send BSSAP
Description
ASSIGNMENT FAILURE message to MSC.
Instance
BSC
35..100
Unit
100ms
Default Value
60
2-188
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
empirical value
Increase the parameter value appropriately
if the mode modification failure frequently occurs, that is, the number
of times that the timer expires is large.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.11 Continue timer for mode modify

Full Name
Continue timer for mode modify
Abbreviation
TModeModifyConn
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
Connection delay timer. This timer is used to wait for connection finished
after sending connection request, including Abis connection and TC
connection.
Timer start: send connection request.
Timer stop: wait for all connection completion message.
Description
Timeout action: clear this service instance.
Instance
BSC
20..70
Unit
100ms
2-189
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
30
Default Value
The default value is set to 50 because five
seconds are enough to complete all connections.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.12 First overload period of flow traffic control

Full Name
First overload period of flow traffic control
Abbreviation
MT11
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the mT11 timer used for traffic control when the cell
is overloaded. The mT11 timer coordinates with mT12 to modify the
ACCESS CONTROL parameter for the cell configuration, and notifies
the MS via system messages.
During the lifetime of the timer mT11, the BSC does not process the
RACH Load Indication message from the BTS, and the value of this
timer must be less than that of timer mT12.
Timer start: When the RACH Load Indication message from the BTS
is received.
Description
Timer stop: None
2-190
SJ-20130408140048-016|2013-07-17(R1.0)
Timeout action: The BSC resumes processing the RACH Load Indication
message.
Associated timer: mT12
Instance
BSC
30..150
Unit
100ms
Default Value
80
Default Value
The fluctuation of overload indication is unlikely

to cause the flow control fluctuation if new overload indication is
not processed within eight seconds.
The larger the parameter value is, the more
stable the flow control is due to lower sensitivity to load indication.
The smaller the parameter value is, the more likely the flow control
fluctuates due to higher sensitivity to load indication.
Change Mode
Offline
Related features
Related Parameters
mT12
Relationship
mT11<mT12
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.13 Second overload period of flow traffic control

Full Name
Second overload period of flow traffic control
Abbreviation
MT12
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
2-191
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the mT12 timer used for traffic control when the cell
is overloaded. The mT12 timer coordinates with mT11 to modify the
ACCESS CONTROL parameter for the cell configuration, and notifies
the MS via system messages.
The value of this timer must be greater than that of timer mT11. The
traffic control procedure is described as follows:
When the network receives the OVERLOAD message for the first time,
the system reduces one traffic control level and starts mT11 and mT12.
During mT11, the OVERLOAD message is neglected. If the network still
receives the OVERLOAD message between mT11 and mT12, it reduces
one traffic control level again, and restarts the two timers. If the network
does not receive the OVERLOAD message after mT12, it increases a
traffic control level, and restarts mT12.
The different traffic control levels have different ratios of traffic being
rejected.
Timer start: When the RACH Load Indication message from the BTS
is received.
Timer stop: When the RACH Load Indication message is received again
from the BTS after mT11 times out.
Timeout action: The system reduces a traffic control level.
Description
Associated timer: mT11
Instance
BSC
50..200
Unit
100ms
Default Value
150
mT11 is used to prevent the fluctuation of
Default Value
load indication. mT12 is used to adjust traffic level after a new

load indication is received. If no load indication is received after
the expiry of mT12, the system lowers the flow control level. 150The
default value is set to 150, which is almost twice the value of

The larger the parameter value is, the greater

the flow control fluctuation is. Similarly, a smaller parameter value
corresponds to less fluctuation.
Change Mode
Offline
Related features
ZGB-03-04-001BSC Load Control
Related Parameters
mT11
Relationship
mT11<mT12
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-192
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.14 Immediate assignment period

Full Name
Immediate assignment period
Abbreviation
T3101
Managed Object
BSS Function Timer
3GPP Name
T3101
3GPP Reference
3GPP TS 44.018
This timer indicates the time period for the instant assigning process.
Timer start: The timer starts when BSC sends an IMMEDIATE
ASSIGNMENT COMMAND message.
Timer stop: The timer stops when BSC receives the ESTABLISH
INDICATION message.
Timeout action: The BSC sends an RF CHANNEL RELEASE message
Description
to the BTS.
Instance
BSC
10..100
Unit
100ms
Default Value
30
Default Value

The default value is set in consideration of

the time needed for sending an immediate assignment message to the
MS and the time needed for the MS to access the network.
A too large parameter value may result in the
waste of channel resources and traffic congestion. A too small parameter
value may decrease the immediate assignment success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-193
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.15 Handover period of source cell

Full Name
Handover period of source cell
Abbreviation
T3103
Managed Object
BSS Function Timer
3GPP Name
T3103
3GPP Reference
3GPP TS 44.018
This timer indicates the time period for intra-BSC handover procedure.
Timer start: The timer starts when BSC sends HANDOVER COMMAND
message to MS.
Timer stop: The timer suspends when BSC receives HANDOVER
COMPLETE message on a new channel or HANDOVER FAILURE
message on an old channel from MS.
Timeout action: If the timer is timeout, the BSC sends a CLEAR
REQUEST message to MSC, with the cause CAUSE_RI_FAIL (radio
Description
interface failure) and the new channel is released.
Instance
BSC
0..1000
Unit
100ms
Default Value
60
Default Value

Change Mode

the time needed for sending the handover command to the MS and the
time needed for the MS to complete the inter-cell handover.
value may decrease the handover success rate.
Offline
2-194
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
rmst1
Relationship
T3103<rmst1
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.16 Assignment period

Full Name
Assignment period
Abbreviation
T3107
Managed Object
BSS Function Timer
3GPP Name
T3107
3GPP Reference
3GPP TS 44.018
This timer indicates the time period for assignment procedure and
internal handover of a cell.
Timer start: The timer starts when BSC sends RIL3_RR ASSIGNMENT
COMMAND message to MS.
Timer stop: The timer stops when BSC receives RIL3_RR ASSIGNMENT
COMPLETE message or RIL3_RR ASSIGNMENT FAILURE message.
Timeout action: For the assignment procedure, the old and new
channels are released, related MS connections are cleared, and a
BSSAP ASSIGNMENT FAILURE message is sent to the MSC; for the
intra-cell handover, the BSC sends a CLEAR REQUEST message to the
Description
MSC, with the cause CAUSE_RI_FAIL (radio interface failure).
Instance
BSC
0..1000
Unit
100ms
Default Value
60
2-195
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


the time needed for sending the assignment command to the MS and the
time needed for the MS to complete the assignment.
value may decrease the assignment success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
rmst1
Relationship
T3107<rmst1
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.17 TCH Channel release period

Full Name
TCH Channel release period
Abbreviation
T3109
Managed Object
BSS Function Timer
3GPP Name
T3109
3GPP Reference
3GPP TS 44.018
This timer supervises the channel release process.
Timer start: The timer starts when BSC sends RIL3_RR CHANNEL
RELEASE message to MS.
Timer stop: The timer stops when BSC receives RELEASE INDICATION
message from BTS (when BTS receives DISC frame from MS).
Timeout action: If this timer is timeout, BSC will send CHANNEL
Description
Instance
BSC
0..1000
2-196
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
100ms
Default Value
50
Default Value
the time needed for the MS to complete the channel release after
receiving
a channel release command, and the time needed for the call drop of
the MS caused by the failure of receiving a channel release command.
To avoid crosstalk caused by network-side channel

release before the completion of channel release at the MS side, the

value of T3109 must be larger than that of the radio link expiration
timer at the MS side. However, a too large parameter value may result
in the waste of channel resources and traffic congestion.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.18 TCH Channel deactivation delay

Full Name
TCH Channel deactivation delay
Abbreviation
T3111
Managed Object
BSS Function Timer
3GPP Name
T3111
3GPP Reference
3GPP TS 44.018
2-197
SJ-20130408140048-016|2013-07-17(R1.0)
After releasing the UM interface radio link layer, in order to make sure
the radio link is disconnected, BSC sets a period of protection time
rmsT3111. Releases the wireless channel and deactivates it after
rmsT3111 timer stops.
Timer start: rmsT3111 timer starts when BSC receives RELEASE
INDICATION message.
Timeout action: If rmsT3111 timer is timeout, the BSC will send RF
Description
CHANNEL RELEASE message to BTS.
Instance
BSC
1..300
Unit
100ms
Default Value
11
Default Value
the time needed for the BTS to send the UA message.


waste of channel resources and traffic congestion. If the parameter

value is too small, the BTS cannot send the UA message to the MS in
time, and thus the MS may fail to complete the channel release in
a short time.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.19 RLSD message receive protection timer

Full Name
RLSD message receive protection timer
2-198
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
T9101
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is timer T9101, supervising the reception of RLSD.
Timer start condition: T9101 starts when BSC sends the BSSAP
CLEAR COMPLETE message to MSC.
Timer stop condition: T9101 stops when the RLSD message from MSC
is received.
Overtime Action: If this timer is overtime, BSC will send RLSD message
Description
to release SCCP connection.
Instance
BSC
20..50
Unit
100ms
Default Value
20
Default Value
Generally, the BSC can receive a message from
the MSC in two seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-199
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.20 Channel activation protection timer

Full Name
Channel activation protection timer
Abbreviation
T9103
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is timer T9103, monitoring channel activation process.
Timer Start: T9103 timer starts when BSC sends CHANNEL
ACTIVATION message to BTS.
Timer Stop: T9103 timer suspends when BSC receives CHANNEL
ACTIVATION ACK or CHANNEL ACTIVATION NACK message.
Overtime Action: If this timer is overtime, BSC will send RF CHANNEL
Description
RELEASE message to BTS
Instance
BSC
20..50
Unit
100ms
Default Value
30
Default Value
Generally, the CHANNEL ACTIVATION ACK message
can be received from the BTS in two seconds.

Only the default value can be used.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-200
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.21 MSC clear command protection timer

Full Name
MSC clear command protection timer
Abbreviation
T9104
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is T9104 timer. It supervises CLEAR COMMAND from
MSC.
Timer Start: T9104 timer starts when BSC sends a CLEAR REQUEST
message to MSC.
Timer Stop: T9104 timer suspends when BSC receives CLEAR
COMMAND message from MSC.
Timeout Action: If this timer is overtime, CLEAR REQUEST message
Description
will be resent (four times at the most).
Instance
BSC
20..50
Unit
100ms
Default Value
30
Default Value
Generally, the CLEAR COMMAND message can be
received from the MSC in three seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-201
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.22 SCCP connection protection timer

Full Name
SCCP connection protection timer
Abbreviation
T9105
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is T9105 timer, monitoring SCCP connection process.
Timer Start: T9105 timer starts when BSC sends BSSAP
SCCP_CONNECTION_REQ message to MSC.
Timer Stop: T9105 suspends when BSC receives SCCP_CONNECTION_CONFIRM/SCCP_CONNECTION_REFUSED message.
Overtime Action: If this timer is overtime, BSC will send CHANNEL
Description
Instance
BSC
20..60
Unit
100ms
Default Value
30
Default Value
Generally, the SCCP CONNECTION CONFIRM or SCCP

CONNECTION REFUSED message can be received from the MSC in
three seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-202
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.23 Time of micro-micro handover delay

Full Name
Time of micro-micro handover delay
Abbreviation
Tmicro
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
In micro-micro handover control, a delay time value is required (the timer
value). Timer Start: relevant timer starts instantly when a call enters a
micro cell. Timer Stop: relevant timer stops when it reaches the set value.
Existing call can use neighboring micro cell in the same layer only when
the timer stops. In this way, it could prevent fast moving mobiles staying
Description
in the micro cell layer.
Instance
BSC
1..200
Unit
100ms
Default Value
1
The purpose of this timer is to reduce the
Default Value
handover times of the fast-travelling MS in a lower-layer network.

Generally, it is sure that the MS still camping on the cell after
eight seconds is not travelling fast. To prevent the handover of the
MS on the same layer, the default value is set to 80.
Set the parameter value according to the geographic
location and distribution of cells and the mobility of MSs in the
area. The larger the parameter value is, the longer the limitation
on handover is.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
2-203
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
Update
2.2.24 TFI and USF release timer

Full Name
TFI and USF release timer
Abbreviation
T3169
Managed Object
BSS Function Timer
3GPP Name
T3169
3GPP Reference
3GPP TS 44.060
This parameter is timer T3169. During the packet uplink transmission, if
N3101 or N3103 counter stops, BSS starts the T3169 timer. Network
utilizes TFI and USF resources on release when T3169 stops.
Timer Start: T3169 timer starts when the counter N3101 = N3101_MAX
or the counter N3103 = N3103_MAX.
Timer stop condition: None.
Timeout action: Release USF and TFI resources.
N3101=N3101_MAX or N3103=N3103_MAX indicates that MS does not
Description
respond BSC, collects TFI and USF resource for BSC reuse.
Instance
BSC
0..65535
Unit
10ms
Default Value
500
Default Value
Protocol Recommended Value

TFI and USF resources are released for reuse
on the network side when timer T3169 expires. The TBF is forcibly

released when the value of N3101 reaches N3101_MAX or the value of

N3103 reaches N3103_MAX. It is unnecessary to set a large parameter
value, which results in a long waiting time and even influences the
utilization of TFI and USF resources. Set the parameter value according
to the recommendation in the protocol.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
0
2-204
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.25 TBF release timer

Full Name
TBF release timer
Abbreviation
T3191
Managed Object
BSS Function Timer
3GPP Name
T3191
3GPP Reference
3GPP TS44.060
This parameter is timer T3169. The conditions of timer start, stop, and
timeout actions are as follows.
Timer start/restart: During the packet downlink transmission, if RLC
data block is the final downlink data block to be transmitted, BSC sends
the RLC data block with the Final Block Identifier (FBI) domain as 1. It
contains an effective RRBP domain to initialize the release of downlink
TBF. At this time, the network starts or restarts T3191.
Timer stop: If RLC mode is ACK mode and MS finds that all
downlink blocks have been collected, MS sends the Packet Downlink
Acknowledgement
message (with FAI domain = 1) through the uplink block specified in
RRBP domain. If BSC receives the Packet Downlink Acknowledgement
message
before T3191 is timeout, T3191 stops.
If RLC mode is NACK mode, MS sends the Packet Control
Acknowledgement message in the uplink block specified by RRBP field.
If BSC receives
the Packet Control Acknowledgement message before T3191 expires,
T3191 stops.
Description
Timeout action: BSC releases this TBF.
Instance
BSC
0..65535
Unit
10ms
2-205
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
500
Default Value

When BSC transmits the last RLC data block of DL TBF, set FBI to 1,
and set RRBP to require the MS for responding with the Packet Downlink
Ack/Nack message and starting T3191. If the required block has
received the MS' response, stop T3191 to end downlink transmission. If
the T3191 overflows, wireless transmission fails and DL TBF is released
improperly.
Setting this parameter value to a larger value helps improve the improer
failure index of DL TBF, and ensure that links are reestablished after the
TBF is better to be released as soon as possible. In this case, channel
resources and TFI resources are not wasted, as well as users' feeling is
not influenced.
The recommeded value is defined in "Table 13.2.1: Specification of
timers used in GPRS on the Network side" in 3GPP TS 04.60, so it is
better not to modify the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.26 TBF protect time when radio link failure

Full Name
TBF protect time when radio link failure
Abbreviation
T3195
Managed Object
BSS Function Timer
3GPP Name
T3195
2-206
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS44.060
This parameter the protection time of downlink TBF when the radio link
fails or when the cell change leads to MS failure to respond.
Timer starts: T3195 starts if counter N3105=N3105_MAX.
Timer stop: none.
Description
Timeout action: BSC can use this TFI.
Instance
BSC
0..65535
Unit
10ms
Default Value
500
Default Value

TFI is released for reuse on the network side when timer T3195
expires. The TBF is forcibly released when the value of N3105 reaches

N3105_MAX. It is unnecessary to set a large parameter value, which

results in a long waiting time and even influences the utilization of TFI
resource.
Use the recommended value specified in Table 13.2.1: Specification of
timers used in GPRS on the Network side of 3GPP TS 04.60.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.27 Bvc block/unblock retry time

Full Name
Bvc block/unblock retry time
2-207
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
BssgpT1
Managed Object
BSS Function Timer
3GPP Name
T1
3GPP Reference
3GPP TS48.018
This parameter monitors BSSGP blocking/unblocking process.
Global process in BSC central module MP uses the timer value. BSS
initiates BVC blocking/unblocking procedure for a point-to-point BVC in
case of OAM intervention or device faults. BSC repeats this procedure if
SGSN does not return BVC BLOCK/UNBLOCK ACK/NACK messages.
At this time, the number of sending increases by 1. The interval between
the messages is the BVC blocking/unblocking retry time. T1 is timeout
but does not exceed the max number of sending, try to re-send it.
T1 exceeds the max number of sending. Ignore it.
The conditions of timer start, stop, and timeout actions are as follows:
Timer start: BSC initiates BVC block/unblock process.
Timer stop: The BVC BLOCK/UNBLOCK ACK/NACK message is
received from SGSN.
Description
Timeout action: BSC repeats the process for N times (configurable).
Instance
BSC
10..300
Unit
100ms
Default Value
30
Default Value
Depends on Protocol Recommended Value and Gb RTT

Set the parameter in consideration of the default

value, the link stability at Gb interface, and the round trip delay
at Gb interface. The default value is recommended when Gb interface
is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-208
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.28 Bvc reset retry time

Full Name
Bvc reset retry time
Abbreviation
BssgpT2
Managed Object
BSS Function Timer
3GPP Name
T2
3GPP Reference
3GPP TS48.018
This parameter monitors BSSGP reset procedure.
BSS initiates "BVC reset" process when BVC (including PTP BVC and
signaling BVC) is required to be reset (disconnection to connection at
Gb interface, and cell is changed from GPRS support to GPRS/EDGE
support) due to certain reason. BSC repeats the procedure if SGSN
does not return BVC RESET ACK/NACK message. At this time, the
number of sending increases by 1. The interval between the messages
is the BVC reset retry time. T2 is timeout but does not exceed the max
number of sending, try to re-send it. T2 is timeout and exceeds the max
number of sending. Change the proper BVC database status to BLOCK.
Timer start: BSC initiates BVC reset process.
Timer stop: BVC reset acknowledgement/unacknowledgement message
is returned by SGSN.
Description
This parameter is changed in V6.20.614a.
Instance
BSC
10..1200
Unit
100ms
Default Value
150
Default Value


is normal.
Change Mode
Offline
2-209
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.29 Suspend retry time

Full Name
Suspend retry time
Abbreviation
BssgpT3
Managed Object
BSS Function Timer
3GPP Name
T3
3GPP Reference
3GPP TS48.018
Class B MS notifies the network to suspend packet service when MS is
ready to perform a voice service.
BSS initiates to suspend SGSN procedure after receiving SUSPEND
message from MS BSC repeats the process if SGSN does not respond
suspend ACK/NACK message. At this time, the number of sending
times increases by 1.
The interval between the messages is the suspend retry time. T3 is
timeout but does not exceed the max number of sending, try to re-send
it. T3 is timeout but does not exceed the max number of sending, stop
the suspend process.
Timer start: BSC initiates the suspend SGSN process.
Timer stop: BSC receives the suspend ACK/NACK message from
SGSN.
Description
Instance
BSC
1..100
2-210
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
100ms
Default Value
30
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
ResumeSetOpt
Relationship
This parameter is only valid when the switch of SUSPEND/RESUME

process is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.30 Resume retry time

Full Name
Resume retry time
Abbreviation
BssgpT4
Managed Object
BSS Function Timer
3GPP Name
T4
3GPP Reference
3GPP TS48.018
2-211
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter monitors BSSGP resuming procedure. Service process

in BSC peripheral module MP uses the timer value. BSS initiates
resuming procedure to SGSN when GPRS-attached MS is not in
dedicated mode and BSS uses Notify SGSN to resume GPRS service
policy. BSC repeats the process if SGSN does not respond resume
ACK/NACK message. At this time, the number of sending times
increases by 1. The interval between the messages is the resume retry
time.
T4 is timeout but does not exceed the max number of sending, try to
re-send it. If T4 is timeout and exceeds the max number of sending,
stop the resume process and inform MS to initiate RA update process.
Timer start: BSC initiates the resume process.
Timer stop: BSC receives the resume ACK/NACK message from SGSN.
Description
Timeout action: BSC repeats the process for N times (configurable)
Instance
BSC
1..100
Unit
100ms
Default Value
30
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
ResumeSetOpt
Relationship

process is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-212
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.2.31 Access capability update retry time

Full Name
Access capability update retry time
Abbreviation
BssgpT5
Managed Object
BSS Function Timer
3GPP Name
T5
3GPP Reference
3GPP TS48.018
This parameter monitors BSSGP RA_CAPABILITY procedure.
Service process in BSC peripheral module MP uses the timer value.
BSC repeats Radio Access Capability Update procedure after BSS
initiates RA_CAPABILITY procedure to SGSN and if SGSN does not
return the RA_CAPABILITY UPDATE ACK/NACK message. Also,
the number of sending times increases by 1. The interval between the
messages is the retry time for radio access capability update. T5 is
timeout but does not exceed the max number of sending, try to re-send it.
If T5 is timeout and exceeds the max number of sending, update process
of radio access capability stops.
Timer start: BSC initiates the radio access capability update process.
Timer stop: BSC receives the radio access capability update ACK/NACK
message from SGSN.
Description
Timeout action: BSC repeats the process for N times (configurable)
Instance
BSC
10..300
Unit
100ms
Default Value
30
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-213
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.32 PFC creating retry time

Full Name
PFC creating retry time
Abbreviation
BssgpT6
Managed Object
BSS Function Timer
3GPP Name
T6
3GPP Reference
3GPP TS48.018
This parameter indicates the PFC creating retry time .
While BSS initiates "Create PFC" process to SGSN, if SGSN does not
respond "Create PFC ACK/NACK" message, you should repeat "Create
PFC" process. The interval between twice is PFC creation retry time.
Timer start: it starts while BSC initiates Download PFC process.
Timer stop: it stops while receiving SGSN Create PFC message.
Description
Timeout action: retransfer for N times (configurable)
Instance
BSC
1..100
Unit
100ms
Default Value
30
Default Value
is normal.
2-214
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
PFCSupport
Relationship
This parameter is only valid when the switch of PFC process is enabled
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.33 PFC modifying retry time

Full Name
PFC modifying retry time
Abbreviation
BssgpT8
Managed Object
BSS Function Timer
3GPP Name
T8
3GPP Reference
3GPP TS48.018
When BSS initiates "Modify PFC" process to SGSN, if SGSN does not
respond the "Modify PFC ACK/NACK" message, repeat "Modify PFC"
process. The interval between two Modify PFC procedures is the PFC
creation retry time.
Timer start: BSC initiates Modify BSS PFC process.
Timer stop: The BSC receives the SGSN Modify BSS PFC Ack message.
Description
Timeout action: retransmit N times (modifiable)
Instance
BSC
1..100
Unit
100ms
Default Value
30
Default Value
2-215
SJ-20130408140048-016|2013-07-17(R1.0)


is normal.
Change Mode
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
ZGB-01-02-001 Quality of Service (QoS)
Related Parameters
PFCSupport
Relationship
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.34 Supervision Timer of LCS

Full Name
Supervision Timer of LCS
Abbreviation
LcsSupervision
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a timer used for supervising a location process.
Start: When the BSC sends a location request to the SMLC.
Stop: When a location acknowledgement message is received.
Description
At expiry: Terminate the location process.
Instance
BSC
100..1000
Unit
100ms
Default Value
250
2-216
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


The larger the parameter value is, the longer the waiting time is
after a location request is sent. Similarly, a smaller parameter value
indicates a shorter waiting time.
Change Mode
Offline
Related features
ZGO-01-03-002 LCS with CGI+TA &ZGO-01-03-003 LCS with AGPS
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.35 Radio Timer of LCS

Full Name
Radio Timer of LCS
Abbreviation
LcsRadio
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a timer used for supervising the sending of radio
information in the location process.
Start: When a location-related message is sent to the MS.
Stop: When an acknowledgement message is received from the MS.
Description
Timeout action: Terminate the location process.
Instance
BSC
10..100
Unit
100ms
2-217
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
50
Default Value


The larger the parameter value is, the longer the waiting time is
after the MS sends a location message. Similarly, a smaller parameter
value indicates a shorter waiting time.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.36 LCS wait intra BSS handover timer

Full Name
LCS wait intra BSS handover timer
Abbreviation
LcsWaitIntraHo
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the waiting time for the completion of an
intra-BSC handover.
Start: An intra-BSC handover is initiated during service location.
Stop: A handover complete message is received.
Description
Timeout action: Terminate the location process.
Instance
BSC
20..100
2-218
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
100ms
Default Value
60
Default Value

The larger the parameter value, the longer the waiting time is after
a handover request is sent. Similarly, a smaller parameter value means

a shorter waiting time.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.37 PS channel delay release timer

Full Name
PS channel delay release timer
Abbreviation
PSRelDelay
Managed Object
BSS Function Timer
3GPP Name
None
3GPP Reference
N/A
2-219
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the delay release timer while dynamic PDCH channel
is converted into TCH channel. The conditions of timer start, stop, and
timeout actions are as follows:
Timer start: All services (including uplink and downlink) on PDCH are
released.
Timer stop: PDCH is occupied again by service TBF.
Timeout action: release PDTCH channel and convert it to TCH channel.
Description
Instance
BSC
50..600
Unit
100ms
Default Value
300
Default Value
The value 300 is sufficient to guarantee that dynamic PS channels can

be converted into dynamic channels if no service is available within 30
seconds.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.38 Ater wait SCCP connection timer

Full Name
Ater wait SCCP connection timer
Abbreviation
TAterWaitConn
Managed Object
BSS Function Timer

2-220
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the SCCP connection wait timer at the Ater interface.
It is used to wait the SCCP CONNECT CONFIRM message of iTC.
Timer start: send connection request message to iTC.
Timer stop: The SCCP connection number that corresponds to this
service is illegal while iTC resource request from service is handled.
Receive link confirm message of iTC.
Timeout action: send Disconnect Request to SCCP and terminate Ater
Description
service.
Instance
BSC
5..20
Unit
100ms
Default Value
15
Default Value
1.5 seconds are enough to establish an SCCP
connection to the iTC.

Change Mode
Offline
Related features
ZGO-05-02-001 Remote Transcoder Support
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Ater interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.39 Ater wait resource acknowledge timer

Full Name
Ater wait resource acknowledge timer
Abbreviation
TWaitAterResAck
2-221
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes the response to apply for resource from iTC,
to configure this timer wait for iTC during iBSC handover.
Timer start: CS service instance sends TC resource request message.
Timer stop:
Receive the response of iTC resource request.
Receive the response of iTC resource request failure.
Timeout action: clear the proper new RANCS process id related to this
service process. The new CS service instance related to this service
Description
process does not exist.
Instance
BSC
5..25
Unit
100ms
Default Value
15
Default Value
1.5 seconds are enough for the iTC to complete
the resource assignment and signalling transmission.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Ater interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-222
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.40 Ater wait resource timer

Full Name
Ater wait resource timer
Abbreviation
TWaitAterRes
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
It is Ater wait resource timer at Ater, used to wait for the RESOURCE
REQUEST ACKNOWLEDGE message from iTC.
Timer start: Request resource from iTC at Ater.
Timer stop: iTC at Ater returns available resource message to service.
Description
Timeout action: Release this service.
Instance
BSC
10..30
Unit
100ms
Default Value
20
Default Value
Two seconds are enough for the iTC to complete
the resource assignment and signalling transmission.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Ater interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-223
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.41 Ater wait resource release timer

Full Name
Ater wait resource release timer
Abbreviation
TAterWaitRel
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
It is Ater wait resource release timer at Ater, used to wait for the
RESOURCE RELEASE ACKNOWLEDGE message from iTC.
Timer start: send iTC resource message to iTC at Ater.
Timer stop: Receive resource release response message from iTC.
Description
Timeout action: Release the SCCP link.
Instance
BSC
20..50
Unit
100ms
Default Value
20
Default Value
The default value is the same as TWaitAterRes.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Ater interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-224
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.42 Ater handover monitor timer

Full Name
Ater handover monitor timer
Abbreviation
TAterMoniterHo
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
Timer start: The service requests circuit resource at Ater on handover.
Timer stop: Receive handover execution message at Ater sent from CS
old service instance. Receive resource release request message at
Ater from CS new service instance.
Timeout action: send release command to CS service from Ater and
Description
release iTC resource message to iTC.
Instance
BSC
70..170
Unit
100ms
Default Value
120
Default Value
12 seconds are enough for a handover process.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Ater interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-225
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.43 HO performed ack timer

Full Name
HO performed ack timer
Abbreviation
TwaitHoPFMAck
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
When using IP carrier at user plane of interface A, because TC is placed
at MGW, CN shall be informed to replace codec during intra-BSC
handover. CN replacement codec is triggered by HANDOVER
PERFORMED message. To ensure MSC has received this message
and successfully
command MGS to replace codec against obstacles at speech aspect,
HANDOVER PERFORMED ACK message is added. This timer is
used to wait for HANDOVER PERFORMED ACK message from MSC.
Timer start: It starts when BSC sends HANDOVER PERFORMED
message to MSC.
Timer stop: It stops when BSC receives HANDOVER PERFORMED
ACK message from MSC.
Timeout action: BSC releases call while sending CLEAR REQUEST
Description
message to MSC.
Instance
BSC
50..70
Unit
100ms
Default Value
60
Default Value
Six seconds are enough for signalling transfer
and the processing in the MSC.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-226
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.44 RIR Timer

Full Name
RIR Timer
Abbreviation
TRIR
Managed Object
BSS Function Timer
3GPP Name
T(RIR)
3GPP Reference
3GPP TS 48.018
This parameter is an expiration timer waiting for the response from the
opposite end after a RAN INFORMATION REQUEST message is sent by
the control end. The timer is started when the control end sends a RAN INFORMATION REQUEST message. It is stopped when a response message is received from the opposite end. If no response is received before
the expiration of the timer, the control end sends a RAN INFORMATION
REQUEST message again, or informs the process failure after sending
Description
the message for RIMRetryTimes times.
Instance
BSC
50..300
Unit
100ms
Default Value
50
Default Value
empirical value

Change Mode
Offline
Related features
ZGO-02-02-011 Inter-BSC NACC_FG_20101030
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
0
2-227
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.45 RI Timer
Full Name
RI Timer
Abbreviation
TRI
Managed Object
BSS Function Timer
3GPP Name
T(RI)
3GPP Reference
3GPP TS 48.018
This parameter is an expiration timer waiting for the response from the opposite end after the serving BSS sends a RAN INFORMATION message.
This timer is started when the serving BSS sends a RAN INFORMATION
message, in which the indicator requiring response from the opposite is
set. It is stopped when a response is received from the opposite end. If no
response is received before the expiration of the timer, the serving BSS
sends a RAN INFORMATION message again, or informs the process fail-
Description
ure after sending the message for RIMRetryTimes times.
Instance
BSC
50..300
Unit
100ms
Default Value
50
Default Value
empirical value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
0
2-228
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.46 RIAE Timer

Full Name
RIAE Timer
Abbreviation
TRIAE
Managed Object
BSS Function Timer
3GPP Name
T(RIAE)
3GPP Reference
3GPP TS 48.018
This parameter is an expiration timer waiting for the response from the
opposite end after a RAN INFORMATION APPLICATION ERROR message is sent by the control end. The timer is started when the control
end sends a RAN INFORMATION APPLICATION ERROR message. It is
stopped when a response message is received from the opposite end. If
no response is received before the expiration of the timer, the control end
sends the RAN INFORMATION APPLICATION ERROR message again,
or informs the process failure after sending the message for the specified
Description
times.
Instance
BSC
50..300
Unit
100ms
Default Value
50
Default Value
empirical value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-229
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.47 Time to wait A handover request

Full Name
Time to wait A handover request
Abbreviation
TWaitAHoReq
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This timer indicates the wait time for a handover request from the A
interface during a 2G/3G relocation procedure.
It is started after the BSC sends a radio resource reservation success
message to the RNC.
It is stopped when the BSC receives of a handover request from the
MSC.
At its expiry, the radio resources are immediately released, and this
instance is released.
Description
Related timer: None
Instance
BSC
4..50
Unit
100ms
Default Value
10
Default Value

The default value is set to 10 because one

second is enough for the RNC to send a handover request to the MSC
and for the MSC to forward the handover request to the BSC.
The waiting time can be appropriately prolonged if the timer expires
when waiting for the handover through A interface.
2-230
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.48 Timer to wait a relocation commit MSG from RNC

Full Name
Timer to wait a relocation commit MSG from RNC
Abbreviation
TWaitRncRelocComm
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This timer indicates the wait time before the BSC receives a Relocation
Commit message from the RNC during a relocation procedure via the
Iur-g interface that is configured between 2G and 3G networks.
It is started after the BSC sends a HandoverRequestAck message to
the MSC.
It is stopped when the BSC receives a Relocation Commit message via
the Iur-g interface from the RNC.
At its expiry, the relocation instance and the corresponding allocated
Description
resources are released.
Instance
BSC
1..200
Unit
100ms
Default Value
100
2-231
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value
the maximum delay of the HandoverRequestAck message from the
BSC to
the MSC, and then to the RNC.
The default value, already taking the message
delay on site into consideration, is recommended.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.49 Timer of TRAU frame Synchronization

Full Name
Timer of TRAU frame Synchronization
Abbreviation
TuTrauSyn
Managed Object
BSS Function Timer
3GPP Name
timer of TRAU frame synchronization
3GPP Reference
3GPP TS 48.0603GPP TS 48.061

This timer is used for TRAU frame synchronization. If call release due
to TRAU frame synchronization lost is enabled, a call is released when
this timer expires.
It is started after an MS accesses the TCH.
It is stopped when the DSP detects that the TRAU frame (voice frame)
is synchronized.
At its expiry, the call is released.
Description
Related timer: None
Instance
BSC
2-232
SJ-20130408140048-016|2013-07-17(R1.0)
10..600
Unit
100ms
Default Value
10
Default Value
Generally, one second (corresponding to the

default value 10) is enough for the MS to detect the media data of
the TRAU frame after a TCH is allocated to it.

Increase the value of this parameter appropriately and observe whether

the rate of call drops caused by the detection of TRAU frames is reduced.
If yes, set a larger value to the parameter until the call drop rate
caused by TRAU frames does not change greatly.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.50 Guards the PS handover required procedure

Full Name
Guards the PS handover required procedure
Abbreviation
T12PSHO
Managed Object
BSS Function Timer
3GPP Name
T12
3GPP Reference
3GPP TS 48.018
It describes the time of Required process which controls PS handover.
After PS Handover Required is sent, the timer starts. The timer stops
after receiving PS Handover Required Ack or Nack. The PS Handover
Description
Required is sent again after expire of timer.

2-233
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
50..1200
Unit
100ms
Default Value
300
Default Value
the experience value of inter-process between two network elements

The default value is recommended for this process
monitoring timer. The parameters relevant to PS handover, including
this parameter, are not in commercial use currently.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.51 Guard resource release after sending PS HO command

Full Name
Guard resource release after sending PS HO command
Abbreviation
TWaitRelInPSHo
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
2-234
SJ-20130408140048-016|2013-07-17(R1.0)
It describes the time of waiting for resource release after PS handover

command is sent.
The timer starts after sending PS Handover Command message. The
timer stops when receiving DELETE BSS PFC from SGSN or handover
finish message from destination cell. The PS Handover Cancel message
Description
is sent to SGSN after expire of timer.
Instance
BSC
100..1000
Unit
100ms
Default Value
300
Default Value

The default value is recommended for this process
monitoring timer. The parameters relevant to PS handover, including
this parameter, are not in commercial use currently.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.52 Time of waiting an internal HO command

Full Name
Time of waiting an internal HO command
Abbreviation
TWaitInternalHoCmd
Managed Object
BSS Function Timer
3GPP Name
N/A
2-235
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter defines the interval of the timer for waiting for internal
handover command from MSC after the service process sends the inter-
Description
nal handover request.
Instance
BSC
1..100
Unit
100ms
Default Value
20
Default Value
Two seconds are long enough for the A interface
to transmit signalling and for the MSC to process signalling.


The waiting time can be appropriately prolonged if the timer expires
when waiting for the internal handover command.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.53 Round trip delay

Full Name
Round trip delay
Abbreviation
RtdDefault
Managed Object
BSS Function Timer
3GPP Name
Round Trip Delay
3GPP Reference
3GPP TS 48.058
2-236
SJ-20130408140048-016|2013-07-17(R1.0)
The procedure of handover with the AMR speech coding is as follows:

The BSC sends a PRE-HANDOVER NOTIFICATION message to the
BTS, plus the RTD (delay time), so that the BTS can coordinate with TC
to achieve such actions as disabling speech rate modification, exiting
TFO.
Afterwards, the BSC sends the handover command to the MS. The RTD
is the transmission delay between BTS and TC, and can be reported to
BSC by BTS via the ROUND TRIP DELAY REPORT message. Before
receiving RTD, the BSC uses the default value RtdDefault.
Timer start: The BSC sends the PRE-HANDOVER NOTIFICATION to
BTS.
Timer stop: The BSC receives the response for pre-handover
notification message (custom message at the Abis interface) from the
BTS.
Timeout action: BSC sends the handover command to MS.
Description
This parameter is currently not used.
Instance
BSC
1..20
Unit
20ms
Default Value
Default Value

100 ms is enough in consideration of the time

needed for message transfer on the user plane between the BTS and
the TC.
If the delay caused by message transfer on the user plane between
the BTS and the TC is long, increase the parameter value appropriately.
Change Mode
Offline
Related features
ZGO-01-01-003 Adaptive Multi-rate Codec (AMR)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-237
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.2.54 IP Abis Wait Timer

Full Name
IP Abis Wait Timer
Abbreviation
twaitabis
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the IP transmission access control timer at the Abis
Description
interface.
Instance
BSC
10..120
Unit
100ms
Default Value
30
Default Value
The default value is set in accordance with the experience value at 3G
side.

Use default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-238
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.55 synchronization timer that ensures source BSS receives

both PS and CS responses
synchronization timer that ensures source BSS receives both PS and CS
Full Name
responses
Abbreviation
T23
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
3GPP TS 48.018
This parameter indicates the timer used by the source BSS for
synchronizing CS handover and PS handover acknowledgment
information. The timer start and stop conditions are described as follows:
Timer start: During DTM handover, a HANDOVER REQUIRED message
or PS-HANDOVER-REQUIRED PDU message is sent.
Timer stop: (1) The BSC receives the HANDOVER REQUIRED REJECT
message or BSSMAP HANDOVER COMMAND message from the MSC,
and receives the PS-HANDOVER-REQUIRED-ACK PDU message or
PS-HANDOVER-REQUIRED-NACK PDU message from the SGSN.
(2) The BSC receives the BSSMAP HANDOVER COMMAND message
that contains the (RR) HANDOVER COMMAND L3 information, and the
MSC chooses to continue CS handover.
(3) The BSC receives the BSSMAP HANDOVER COMMAND message
that contains the (RLC/MAC) DTM HANDOVER COMMAND L3
information, and the MSC chooses to send the DTM handover command
to the MS without waiting for the PS handover acknowledgment.
Description
Timeout action: Measures for handling DTM handover failures
Instance
BSC
100..200
Unit
100ms
Default Value
100
Default Value
Set this parameter based on the general network condition.
This function is not in commercial use in this version. No modification
is required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-239
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.56 synchronization timer that ensures target BSS receives both

PS and CS requests
synchronization timer that ensures target BSS receives both PS and CS
Full Name
requests
Abbreviation
T24
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
3GPP TS 48.018
This parameter indicates the timer used by the target BSS for
synchronizing CS handover and PS handover request information. The
timer start and stop conditions are described as follows:
Timer start: The BSC receives the PS-HANDOVER-REQUEST PDU
message that contains CS Indication IE or the HANDOVER REQUEST
message that contains PS Indication IE.
Timer stop: Both HANDOVER REQUEST and PS-HANDOVERREQUEST PDU messages are received, and PS Indication and CS
Indication IE contain the same information.
Description
Timeout action: Measures for handling DTM handover failures
Instance
BSC
40..90
Unit
100ms
Default Value
60
Default Value
is required.
2-240
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.57 T3197
Full Name
T3197
Abbreviation
T3197
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
3GPP TS 44.060
This parameter is the timer for the enhanced DTM CS release. The timer
start and stop conditions are described as follows:
Timer start: The Packet CS Release Indication message is sent by the
BSC.
Timer stop: The BSC receives a message indicating that the Packet SI
Status message has been completely received. After RR is released,
the Packet SI Status message is a required for keeping PS resources.
The BSC sends a Channel Release message indicating that the PS
transmission is kept after CS release.
Timeout action: If the Packet SI Status message is not received after the
timer times out, the BSC sends a Channel Release message indicating
Description
that the PS transmission is not kept after CS release.
Instance
BSC
0..65535
Unit
100ms
2-241
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
200
Default Value
is required.
Change Mode
Offline
Related features
N/A
Related Parameters
DTMEnhanceCapa
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.58 Paging Interval

Full Name
Paging Interval
Abbreviation
PagWaitTime
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the time of the BSC in waiting for a paging
response after sending a paging message. The paging mode includes
precise paging and common paging.
If the BSC does not receive any response within this time range, the
Description
BSC will initiate paging again according to the paging configuration.
Instance
Cell
20..80
Unit
100ms
Default Value
25
2-242
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
A paging response from the MS can be received
within 2.5s.

It is required to configure this parameter

by considering the configuration of paging module and the transmission
delay of Abit interface.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.2.59 2G Load synchronized to 3G Timer

Full Name
2G Load synchronized to 3G Timer
Abbreviation
Load2gSynTimer
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the timer for the services to obtain 2G cell load
information from the database.
Timeout action: The service saves the copy of obtained load information
in the storage area, and the synchronization platform synchronizes the
Description
information to the 3G system.
Instance
BSC
100..6000
Unit
1ms
Default Value
3000
2-243
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The timer for services to obtain 2G cell loads should not be set too short,
otherwise, frequency actions reduce the efficiency.

The longer the timer is set, the worse real-time synchronizatione of

loads, and the greater difficulty for the 3G side to make decisions. The
shorter the timer is set, the better real-timenes, but greater handling load.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.60 2G Cell Radio Resource Synchronization Timer

Full Name
2G Cell Radio Resource Synchronization Timer
Abbreviation
CrrmSynTimer
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the timer for performing the complete synchronization
of 2G cell attributes and the NACC information.
Timeout action: All 2G cell attributes and NACC information is
Description
synchronized to the 3G system.
Instance
BSC
1..60
Unit
100ms
Default Value
30
2-244
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Cell property and NACC information are synchronized through

the synchronization platform. This features high efficiency and
synchronization can be performed frequently.
The longer the timer is set, the worse real-time synchronization
performance of loads, and the greater difficulty for the 3G side to make
decisions. The shorter the timer is set, the better real-timeness, but
greater processing load.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.61 Handover protecting timer to WCDMA/FDD

Full Name
Handover protecting timer to WCDMA/FDD
Abbreviation
T3121
Managed Object
BSS Function Timer
3GPP Name
T3121
3GPP Reference
3GPP TS 44.018
This parameter is Timer T3121, indicating the protection time after
sending Inter-System to Utran Handover Command (UM) to
MS.
The timer starts when BSC sends the "inter-system to utran handover
command" message to MS.
The timer stops when BSC receives "CLEAR COMMAND" message
from MSC or "HANDOVER FAILURE" message from MS.
Timeout action: The BSC sends CLEAR REQUEST message to MSC,
Description
with the cause CAUSE_RI_MSG_FAIL (radio interface message failure).

2-245
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
1..650
Unit
100ms
Default Value
100
Default Value
the time needed for the MS to receive an inter-system handover
command
and complete the handover.


value may decrease the handover success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.62 SubCell PingPong handover timer

Full Name
SubCell Ping-Pang handover timer
Abbreviation
TscPingPang
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
2-246
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the time period for deciding whether a handover
in the subcell is ping-pong handover. If two handovers in a subcell are
performed within the time specified by this parameter, a ping-pong handover between related subcells is recorded in the performance report.
The recorded cases include: the MS performs handover back and forth
between two subcells within the same site, or the MS performs handover
Description
back and forth between two subcells between two sites.
Instance
BSC
20..1000
Unit
100ms
Default Value
100
The default value is set based on a common
Default Value
radio environment. Generally, it is deemed that a ping-pong handover
occurs if handover occurs frequently between two subcells in 10

seconds.
The smaller the parameter value is, the less
restrictive the criterion for ping-pong handover is. Similarly, the
larger the parameter is, the more restrictive the criterion for ping-pong
handover is. This parameter can be used to evaluate whether

inter-subcell
handover parameters are properly set.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-247
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.63 Time of Cobcch wait for MR report

Full Name
Time of Cobcch wait for MR report
Abbreviation
TCobcchWaitMR
Managed Object
BSS Function Timer
3GPP Name
N/A
3GPP Reference
N/A
When the BSC receives the assignment command from the MSC, if the
MR is not enough for deciding whether channels can be assigned in the
Description
second sub-cell, the BSC sets this parameter to wait for more MR.
Instance
BSC
0..30
Unit
100ms
Default Value
Default Value
the second sub-cell can reduce the connectivity rate. If the first sub-cell
is not so busy, services can be handed over to the second sub-cell
Waiting for the measurement report to determine whether to assign to
through the subsequent inter-cell handover.

If the call setup process takes a long time and involves encryption and
authentication, and measurement reports are already obtained before
assignment, set this parameter to 0.

If the call setup process takes a short time, set this parameter to a non-0
value to wait for the measurement report. However, this affects the
connection speed. Therefore, set this parameter to a non-0 value only
when the service is directly assigned to the second sub-cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B.
2-248
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.2.64 SDCCH Channel release period

Full Name
SDCCH Channel release period
Abbreviation
TSDRelPeriod
Managed Object
BSS Function Timer
3GPP Name
T3109
3GPP Reference
3GPP TS 44.018
This parameter indicates a period of releasing a Standalone Dedicated
Description
Control Channel (SDCCH).
Instance
BSC
0..1000
Unit
100ms
Default Value
50
Default Value
The release period on the SDH is the same as the default value on the
TCH.
The abnormal release time of the SD channel can be shortened in
accordance with test requirements.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-249
SJ-20130408140048-016|2013-07-17(R1.0)
2.2.65 SDCCH Channel deactivation delay

Full Name
SDCCH Channel deactivation delay
Abbreviation
TSDDeactDelay
Managed Object
BSS Function Timer
3GPP Name
T3111
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates a delay of deactivating an SDCCH.
Instance
BSC
1..300
Unit
100ms
Default Value
Default Value
The deactivation delay on the SDH is the same as the default value
on the TCH.
The parameter indicates release protection delay, and the value is within
1s.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.2.66 Mute call detect timer

Full Name
Mute call detect timer
Abbreviation
MuteCallDetTimer
Managed Object
BSS Function Timer

2-250
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Timer for a unilateral conversation check. The timer sets the threshold
of the package lost duration. If the package lost duration exceeds the
Description
threshold, a unilateral conversation check is triggered.
Instance
BSC
10..3000
Unit
100ms
Default Value
100
Default Value
If there is no data transmission on a channel for 10 seconds, the BSC
performs a check to detect a unilateral conversation.

The default value is recommended. If this parameter is set too low,

handover decisions may not be made correctly; if the parameter is set too
high, the subscriber may hook on, and the unilateral cannot be detected.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3 BSS Function Handover Control

(GBssHandoverControl)
2.3.1 BSC Handover Control ID
Full Name
BSC Handover Control ID
2-251
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
GBssHandoverControl
Managed Object
BSS Function Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->BSS Function Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.2 Handover synchronization indication support

Full Name
Handover synchronization indication support
Abbreviation
HoSyncInd
Managed Object
3GPP Name
ROT: Report Observed Time Difference
3GPP Reference
3GPP TS44.018
2-252
SJ-20130408140048-016|2013-07-17(R1.0)
If the parameter is set to 1 (Yes), the BSC adds Synchronization Indication IE to the sent Handover Command message and sets ROT to 1 for
both synchronized and asynchronized handovers. In this case, the MS
adds Mobile Observed Time Difference in the sent Handover Complete
message, indicating the clock reference difference between two handover
Description
cells.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Generallly, the time reference difference between two cells does not
need to be measured.
When the synchronized network (radio frame synchronization, which is

acchieved through the base station gaining an access to GPS signals) is

used, users can set this parameter as "Yes", to observe the evaluated
synchronization result of Mobile Observed Time Difference in the
HANDOVER COMPLETE message.
Change Mode
Offline
Related features
ZGB-02-02-001 Basic Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.3 Internal redirection enable

Full Name
Internal redirection enable
Abbreviation
InDREnable
2-253
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to allow an assignment to request a
channel from other cells in the BSC when the assignment fails to obtain
Description
a channel.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
The default value is Yes in system control

parameters. Generally, it is required to modify only the related cell
parameters to control the level of the cell.
This function should be enabled to reduce network
congestion and uneven radio resource allocation and increase the call
completion rate when a cell is fluctuantly congested and its neighboring

cells have available service channels. However, enabling the function

will increase access delay and negatively affect user satisfaction.
In a heavily-congested network, enabling the function does not work.
In this case, capacity expansion and traffic balancing are much better
ways to relieve network congestion.
Change Mode
Offline
Related features
Related Parameters
OutDREnable
Relationship
The internal redirection function is enabled only when the BSC-level and
cell-level switches are set to Yes.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-254
SJ-20130408140048-016|2013-07-17(R1.0)
2.3.4 Outer redirection enable

Full Name
Outer redirection enable
Abbreviation
OutDREnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to allow an assignment to request a
channel from the cells outside the BSC when the assignment fails to ob-
Description
tain a channel.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Generally, this function is disabled because
it relates to handovers outside the MSC.

This function should be enabled to reduce network
congestion and uneven radio resource allocation and increase the call
completion rate when a cell is fluctuantly congested and its neighboring
cells have available service channels. However, enabling the function
will increase access delay and negatively affect user satisfaction.

In a heavily-congested network, enabling the function does not work.
In this case, capacity expansion and traffic balancing are much better
ways to relieve network congestion.
Change Mode
Offline
Related features
Related Parameters
InDREnable
Relationship
The outer redirection function is enabled only when the BSC-level and
cell-level switches are set to Yes.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
2-255
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.3.5 BSC intracell handover enable

Full Name
BSC intracell handover enable
Abbreviation
HoIntraEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to allows the BSC to perform intra-cell
Description
handovers.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Handover is a basic function.
The default value is recommended. Generally,
intra-cell handovers are not controlled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-256
SJ-20130408140048-016|2013-07-17(R1.0)
2.3.6 SDCCH handover enable

Full Name
SDCCH handover enable
Abbreviation
SHoEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether the SDCCH handover is allowed.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Disable SDCCH handover when MS does not move
at high speed because the duration on SD is very short.
SDCCH handover can be enabled for cells covering
motorway to improve the access success rate.
Change Mode
Offline
Related features
ZGO-02-02-004 SDCCH/SDCCH Handover
Related Parameters
sdhoControl
Relationship
A cell can support SDCCH handover only when

both the BSC-level switch and the cell-level switch are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.7 Handover request response

Full Name
Handover request response
2-257
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
HoACK
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether MSC should respond messages for
BSC outgoing handover. If the parameter is set to 1, the HANDOVER
REQUIRE message contains Response Request, and the MSC, upon
handover failure, will return the Response Request Reject message to
the BSC. If the parameter is set to 0, the MSC will not return the message
to the BSC upon handover failure, and the BSC knows the handover fails
Description
when the timer T7 times out.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The MSC are not required to give responses,
but timeout action will be carried out.
It is recommended to set this parameter to
1.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-258
SJ-20130408140048-016|2013-07-17(R1.0)
2.3.8 Old BSS to new BSS information

Full Name
Old BSS to new BSS information
Abbreviation
OldToNewCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
In an outgoing handover, this parameter specifies the contents in the Old
BSS to New BSS Information contained in the HANDOVER REQUIRED
message.
The four items Synchronization Indication, Cipher Mode Setting,
Multi-Rate configuration, and Frequency List are controlled by the upper
four bits.
BIT3: Whether MultiRate configuration is sent. 0: NOT SENT, 1: SENT
BIT5: Whether the hopping frequency is set with the FreqList format.
0: NO, 1: YES
BIT6: Whether to optimize the setting of AMR MultiFrequency. 0: NO,
1: YES
BIT7: Whether the HANDOVER COMMAND contains the Cipher
information parameter. 0: NO, 1: YES
BIT8: Whether to optimize the synchronization information parameter. 0:
Description
NO, 1:YES
Instance
BSC
0..255
Unit
N/A
Default Value
64
Default Value
This is a functional switch and is disabled by default. Bit 7: enabled
by default.
However, you can enable this function if necessary.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-259
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.9 Queuing indicator in handover required message

Full Name
Queuing indicator in handover required message
Abbreviation
HandOutQueInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether queuing is allowed during inter-BSC
outgoing handovers, that is, whether queuing is allowed according to the
Description
Queuing Indicator parameter in the Handover Required message.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
The BSC decides whether to carry out a handover

whenever it receives a measurement report. During such decisions,
the BSC possibly select different target cells.
During inter-BSC handovers, if channel congestion occurs in the target
cell, queuing can relieve the congestion. In this case, this parameter

of the source BSC must be set to "Handout queue enable", so that

the Queuing Indicator parameter in the Handover Required message
indicates queuing is allowed. In this way, the MSC indicates the target
BSC that queuing is allowed through the HANDOVER REQUEST
message.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
2-260
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.10 A+B solution for TD handover enabled

Full Name
A+B solution for TD handover enabled
Abbreviation
TDAplusBEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the A+B solution for TD handover is
Description
enabled.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
The default is TD handover A+B solution.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
2-261
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
Update
2.3.11 Pingpong handover duration

Full Name
Pingpong handover duration
Abbreviation
PingPongDura
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a timer used to determine whether a handover is a pingpong handover. The timer is started when an MS performs handover from
a cell. If the MS performs handover to the source cell, and the interval
between two handovers is shorter than the value of this parameter, this
Description
handover is recorded as a ping-pong handover.
Instance
BSC
0..60
Unit
Default Value
10
Default Value

Generally, the handover is regarded as a ping-pong

handover if an MS is handed over forth and back between two cells
within 10 seconds.
The default value is recommended. The larger
the parameter value is, the longer the time is in which a handover
is deemed as a ping-pong handover.
Change Mode
Offline
Related features
ZGB-02-02-002 Basic Handover Decision Criteria
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-262
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On
Sdcch
Full Name
Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch
Abbreviation
NcellSelCtrlPbgt1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used to control whether the N value, P value, or average
PBGT value is applied for neighbor cell selection in the case of PBGT
Description
handover on the SDCCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The original network KPIs remain unchanged.

It is recommended that this switch be enabled.
After that, the neighbor cell selection during PBGT handover judgment
is more reasonable.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-263
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On
Tch
Full Name
Use N/P When Select Neighbour Cell for Pbgt Handover On Tch
Abbreviation
NcellSelCtrlPbgt2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
PBGT value is applied for neighbor cell selection in the case of PBGT
Description
handover on the TCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

It is recommended that this switch be enabled.
After that, the neighbor cell selection during PBGT handover judgment
is more reasonable.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-264
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Sdcch
Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Full Name
Sdcch
Abbreviation
NcellSelCtrlUlQ1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
level value is applied for neighbor cell selection in the case of uplink quality
Description
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Usually, this switch is disabled. During neighbor
cell selection, using the N or P value is more reliable but may cause
handover delay.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-265
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Uplink Quality Handover On Tch
Abbreviation
NcellSelCtrlUlQ2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
level value is applied for neighbor cell selection in the case of uplink quality
Description
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-266
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Sdcch
Use N/P When Select Neighbour Cell for Downlink Quality Handover On
Full Name
Sdcch
Abbreviation
NcellSelCtrlDlQ1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
level value is applied for neighbor cell selection in the case of downlink
Description
quality handover on the SDCCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-267
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality
Handover On Tch
Use N/P When Select Neighbour Cell for Downlink Quality Handover On
Full Name
Tch
Abbreviation
NcellSelCtrlDlQ2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
quality handover on the TCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-268
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Sdcch
Use N/P When Select Neighbour Cell for Uplink Level Handover On SdFull Name
cch
Abbreviation
NcellSelCtrlUlLev1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
level value is applied for neighbor cell selection in the case of uplink level
Description
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
Change Mode
Offline
Related features
N/A
2-269
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level
Handover On Tch
Full Name
Use N/P When Select Neighbour Cell for Uplink Level Handover On Tch
Abbreviation
NcellSelCtrlUlLev2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
level value is applied for neighbor cell selection in the case of uplink level
Description
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
Change Mode
Offline
Related features
N/A
2-270
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Sdcch
Use N/P When Select Neighbour Cell for Downlink Level Handover On
Full Name
Sdcch
Abbreviation
NcellSelCtrlDlLev1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
level handover on the SDCCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode

handover delay.
Offline
2-271
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level
Handover On Tch
Use N/P When Select Neighbour Cell for Downlink Level Handover On
Full Name
Tch
Abbreviation
NcellSelCtrlDlLev2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
level handover on the TCH.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

handover delay.
2-272
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.3.22 BSC Internal Handover Parameter of IPA

Full Name
BSC Internal Handover Parameter of IPA
Abbreviation
IPAInterHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the handover method employed by CS services
when performing intra-BSC Handover in the case of 3GPP IPA.
By default, compatible versions are used before and after the internal
handover, and the handover is performed conforming to the protocol.
1: The services use the handover procedure supported by the MSC for
handover from AMR-HR to AMR-FR using SET 1.
Description
2: The internal handover switches to the BSC-preferred speech version.
Instance
BSC
0..2
Unit
N/A
Default Value
0
The value 0 and try to remain TRFO. In addition, as specified in the
Default Value
protocol, SET1 is the rate set of FR AMR and HR AMR. Handovers do
not require MAC processing. If MSC supports such kind of handover

modes, do not set it to 1.
2-273
SJ-20130408140048-016|2013-07-17(R1.0)
In normal situations, set this parameter to 0. When MSC does not

support handovers between AMR FR SET1 and HR SET1, set this
parameter to 1. If the voice version with BSC priority is preferred, set

this parameter to 2.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.23 Handover between cells of different net support

Full Name
Handover between cells of different net support
Abbreviation
InterNetHO
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the inter-cell (with different
network IDs) handover. If it is set to "NO", The adjacent cell to which
handover (or reselection) performed must have the sane network ID
Description
(MCC/MNC) as this cell.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
2-274
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Handovers between different telecom operators may involve extra
charge. It is disabled by default.
In general, set this parameter to 0. Set this parameter to 1 if specially
required by the telecom operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.24 the policy of choosing speech version in 3GPP IPA BSC

handover
Full Name
the policy of choosing speech version in 3GPP IPA BSC handover
Abbreviation
ipabschotype
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
the policy of choosing speech version in 3GPP IPA BSC handover
Instance
BSC
0: the same channel type in handover preferred
1: the channel type in ASSIGNMENT REQUEST preferred , when using
AMR
2: the channel type in ASSIGNMENT REQUEST preferred , anytime
Unit
N/A
Default Value
2-275
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The default value is the one specified in the protocol.

Modify this parameter if the telecom operator requires that HR-type calls
be reduced. Generally, modify this parameter to 1. If a comparatively
small number of MSs support AMR in the local area, modify this
parameter to 2.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 C.
Parameter Modifying
Detail
New
2.3.25 Forbid Handover during releasing

Full Name
Forbid Handover during releasing
Abbreviation
ForbidRelHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
With this parameter enabled, if the BSC receives a DISCONNECT or RELEASE message and then a handover occurs, the BSC will not send a
handover command to the BS to avoid MS release delay. The BSC does
not determine whether to hand over in the time period set by the parameter
ForbidRelHoMargin when the BSC receives a DISCONNECT or RELEASE
message. This parameter is used to decrease the call drop rate during a
Description
release without impairing the handover success rate.
Instance
BSC
0..1
2-276
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Enabled by default to avoid MS release delay in some specific scenarios

Configured as appropriate
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->Global Information

Configuration->BSS Function Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.26 the interval of forbid Handover

Full Name
the interval of forbid Handover
Abbreviation
ForbidRelHoMargin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a time period for handover disabling during a re-
Description
lease.
Instance
BSC
10..100
Unit
100ms
Default Value
40
2-277
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Enough for a release process

Adjusted as appropriate
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.27 Optimize when handover command lost

Full Name
Optimize when handover command lost
Abbreviation
HoCmdLostOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter enables or disables the detection on handover command
Description
loss due to Abis congestion to avoid handover call drop.
Instance
BSC
0:No
1:Yes
Unit
N/A
Default Value
Default Value
None
2-278
SJ-20130408140048-016|2013-07-17(R1.0)

Disabled by default
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.3.28 The delay after handover command when optimize

Full Name
The delay after handover command when optimize
Abbreviation
TDelayAftHoCmdOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
With the parameter HoCmdLostOpt enabled, when the time configured by
this parameter expires, the BSC starts to check whether the call is resumed.
If yes, the handover command is considered to be lost. This parameter
should be set greater than T200N200; otherwise, the BSC cannot deter-
Description
mine accurately whether the handover command is lost.
Instance
BSC
1..120
Unit
Default Value
Default Value
Experience value
2-279
SJ-20130408140048-016|2013-07-17(R1.0)

More than T200(N200+1)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4 eMLPP Configuration (GBssEmlpp)

2.4.1 eMLPP ID
Full Name
eMLPP ID
Abbreviation
GBssEmlpp
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
eMLPP ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
2-280
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->eMLPP Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.2 Queue indicate when assign

Full Name
Queue indicate when assign
Abbreviation
queueIndAss
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
During an assignment, this parameter decides whether to allow queuing
or carry out the assignment according to the cell settings when there are
Description
no available channels in the cell.
Instance
BSC
0: Queue forbidden when assign
1: Queue allowed when assign
2: According to the cell
Unit
N/A
Default Value
Default Value
Generally, you do not have to enable the assignment
queuing function when there are enough network resources.
When the traffic is high, enabling this function
can relieve channel congestions but will increase the queuing time.
Change Mode
Offline
2-281
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-01-03-001 eMLPP
Related Parameters
PreemptionIndAss
ForcedHolndAss
QueueIndAss
When either PreemptionIndAss or ForcedHolndAss is set to "allowed",
QueueIndAss must be set to "allowed".
Relationship
When either PreemptionIndAss or ForcedHolndAss is set to "According

to the cell", QueueIndAss must be set to "allowed" or "According to the
cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.3 Queue allowed when handover

Full Name
Queue allowed when handover
Abbreviation
queueIndHo
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
During a handover, this parameter decides whether to allow queuing or
carry out the assignment according to the cell settings when there are no
Description
available channels in the cell.
Instance
BSC
0: Queue forbidden when handover
1: Queue allowed when handover
Unit
N/A
Default Value
2-282
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
There are many target cells for handovers and
the time interval between handover attempts is short.
Enabling this function can relieve channel
congestions in busy hours.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
PreemptionIndHo
ForcedHolndHo
QueueIndHo
When either PreemptionIndHo or ForcedHolndHo is set to "allowed",
Relationship
QueueIndHo must be set to "allowed".

When either PreemptionIndHo or ForcedHolndHo is set to "allowed",
QueueIndHo must be set to "allowed" or "According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.4 Forced handover indication for assign

Full Name
Forced handover indication for assign
Abbreviation
forcedHoIndAss
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to allow forced handovers during an assignment or carry out the assignment according to the cell settings when
Description
there are no available channels in the cell.
Instance
BSC
2-283
SJ-20130408140048-016|2013-07-17(R1.0)
0: Forced handover forbidden when assign

1: Forced handover allowed when assign
Unit
N/A
Default Value
Default Value

If you want high-priority users to access channels

through forced handover during assignments, you should enable this

switch. If the forced handover function will be used by
AssPreemptstrategy
during the assignment, you should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
QueueIndAss
Relationship
When ForcedHolndAss is set to "According to the cell", QueueIndAss

must be set to "allowed" or "According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.5 Forced handover indication for handover

Full Name
Forced handover indication for handover
Abbreviation
forcedHoIndHo
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-284
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter decides whether to allow forced handovers during a handover or carry out the handover according to the cell settings when there
Description
are no available channels in the cell.
Instance
BSC
0: Forced handover forbidden when handover
1: Forced handover allowed when handover
Unit
N/A
Default Value
Default Value

switch. If the forced handover function will be used by HoPreemptstrategy

during the handover, you should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
QueueIndHo
Relationship
When ForcedHolndHo is set to "According to the cell", QueueIndHo

Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.6 Forced release indicate when assign

Full Name
Forced release indicate when assign
Abbreviation
preemptionIndAss
Managed Object
eMLPP Configuration
3GPP Name
N/A
2-285
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter decides whether to allow forced releases during an assignment or carry out the assignment according to the cell settings when
Description
there are no available channels in the cell.
Instance
BSC
0: Forced release forbidden when assign
1: Forced release allowed when assign
Unit
N/A
Default Value
Default Value
Forced releases have more effect on low-priority

users. By default, the forced release function is disabled. You can
enable it if necessary.
first during assignments, you should enable the forced release function.
If the forced release function will be used by AssPreemptstrategy

Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
QueueIndAss
When PreemptionIndAss is set to "allowed", QueueIndAss must be set
Relationship
to "allowed".
When PreemptionIndAss is set to "According to the cell", QueueIndAss
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-286
SJ-20130408140048-016|2013-07-17(R1.0)
2.4.7 Forced release allowed when handover

Full Name
Forced release allowed when handover
Abbreviation
preemptionIndHo
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether to allow forced releases during a handover or carry out the handover according to the cell settings when there
Description
are no available channels in the cell.
Instance
BSC
0: Forced release forbidden when handover
1: Forced release allowed when handover
Unit
N/A
Default Value
Default Value

first during handovers, you should enable the forced release function.
If the forced release function will be used by HoPreemptstrategy during

the handover, you should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
QueueIndHo
Relationship
When PreemptionIndHo is set to "According to the cell", QueueIndHo

Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-287
SJ-20130408140048-016|2013-07-17(R1.0)
2.4.8 Wait resource timer after forced handover (ForceHoWait,

100ms)
Full Name
Wait resource timer after forced handover (ForceHoWait, 100ms)
Abbreviation
forceHoWait
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the time to wait for resources after a forced
handover. If a resource is obtained within this period, no more forced
handovers or releases will be initiated and the assignment will stop
queuing. If not, more forced handovers or releases will be initiated or
the assignment will still queue for resources, depending on parameter
settings. The parameter should be set according to the time required
for a complete handover.
Start: A forced handover is initiated and the assignment waits for
channel releases.
Stop: The user that initiates the forced release accesses a channel.
Timeout action: More forced handovers or releases will be initiated or
the assignment will still queue for resources, depending on parameter
Description
settings.
Instance
BSC
10..40
Unit
100ms
Default Value
25
Default Value
The default value is larger than the time required
for a complete handover.
This parameter should be set according to the
time required for a complete handover and channel release.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-288
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.9 Wait resource timer after forced release

Full Name
Wait resource timer after forced release
Abbreviation
forceRelWait
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the time to wait for resources after a forced
release. If a resource is obtained within this period, no more forced
releases will be initiated and the assignment will stop queuing. If not,
more forced releases will be initiated or the assignment will still queue
for resources, depending on specified settings. The parameter should
be set according to the time required for a complete forced release.
Start: A forced release is initiated and the assignment waits for channel
releases.
Stop: The user that initiates the forced release accesses a channel.
Timeout action: More forced releases will be initiated or the assignment
Description
will still queue for resources, depending on parameter settings.
Instance
BSC
10..40
Unit
100ms
Default Value
25
Default Value
The default value is larger than the time required
for a complete channel release.
time required for a complete channel release.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
2-289
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.10 Enough low priority for preemption

Full Name
Enough low priority for preemption
Abbreviation
lowestPriority
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
During searches for the targets of forced handovers or releases, if the priorities of the targets are not higher than this priority, these targets will be
considered to have the lowest priorities and can be the targets of forced
handovers or releases. No more searches will be done. In this way, the
number of times of searches is reduced. The value "1" indicates the high-
Description
est priority.
Instance
BSC
1..15
Unit
N/A
Default Value
14
Default Value
By default, the user who has the lowest priority
is found.
actual lowest priority and the expected lowest priority.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
2-290
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.11 Enough call duration for preemption

Full Name
Enough call duration for preemption
Abbreviation
longCallDuration
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
During searches for the targets of forced handovers or releases, if the call
duration of the targets is larger than this parameter, these targets will be
considered to have enough long calls and can be the targets of forced
handovers or releases. No more searches for the target with the longest
call duration will be done. In this way, the number of times of searches is
Description
reduced.
Instance
BSC
0..65535
Unit
480ms
Default Value
50
Default Value
This is a special function. The default value
is set according to your specific needs.

You can set this parameter to a higher value

to ensure that the users with short calls will not be the targets
of forced releases.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
2-291
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.12 Forced handover target penalty time

Full Name
Forced handover target penalty time
Abbreviation
forceHoPenalty
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the time period in which the target of forced
handover cannot be a handover target any more after the forced
handover fails.
Start: The target fails to carry out the handover and release the channel.
Stop: None.
Description
At expiry: The subscriber can be a target of forced handover again.
Instance
BSC
0..255
Unit
480ms
Default Value
60
Default Value
The default penalty time is set to avoid failures
caused by repeated forced handovers of the same user.


radio signal changes of the user that is handed over forcedly. When
the user moves quickly, you can set a shorter penalty time.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
2-292
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.13 Priority of emergency service

Full Name
Priority of emergency service
Abbreviation
emergServicelPrio
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the priority of emergency calls. Those calls with
priorities higher than or equal to the parameter value are emergency calls.
Description
The value "1" indicates the highest priority.
Instance
BSC
1..15
Unit
N/A
Default Value
Default Value
Generally, the priority of emergency calls
is 1.
priority of your local emergency calls.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
2-293
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.14 User priority threshold for EMLPP

Full Name
User priority threshold for EMLPP
Abbreviation
priThreshold
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter (PriThreshold) uses the service of preferred access for
high-priority subscriber, that is eMLPP service, the system may set some
reserved channels (currently, only full rate TCH channels are supported
to be the reserved channels).
When CS instance calls database to apply for channels, the
subscriber's PriorityLevel information reaches to database, and is
compared with PriThreshold in the database and BSC table. When
PriorityLevelPriThreshold (the less the subscriber's priority level value,
the higher the priority level, that is the subscriber's priority level is not
Description
lower than PriThreshold priority), the reserved channel can be used.
Instance
BSC
1..15
Unit
N/A
Default Value
Default Value
empirical value

You can adjust this parameter as needed.
Change Mode
Offline
2-294
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-01-03-001--Emlpp
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.15 Reserved channel first

Full Name
Reserved channel first
Abbreviation
rsvChanFirst
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the selection order of reserved channel and
non-reserved channel. If this feature is enabled, the reserved channel
has the higher priority.
Yes: reserved channel is preferred.
Description
No: non-reserved channel is preferred.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
Generally, reserved channels are used first
to avoid the waste of channel resources.
The default value is recommended unless otherwise
necessary.
Change Mode
Offline
Related features
2-295
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.16 Support EMLPP(SupportEMLPP)

Full Name
Support EMLPP(SupportEMLPP)
Abbreviation
supportEmlpp
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the eMLPP function is enabled.
0 (NO): Disabled.
1 (YES): Enabled. The related functions include queuing, forced
Description
handover and release, and reserved channels.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The queue-up function is always applied. This switch is enabled by
default, to avoid that the queue-up function does not take effect.

Change Mode
Generally, the switch can be enabled. It can be disabled to make such

functions as queuing, forced handover and release, and reserved
channels invalid.
Offline
2-296
SJ-20130408140048-016|2013-07-17(R1.0)
ZGO-01-03-001
Related features
eMLPP
Related Parameters
EMLPPThs
EMLPPThs
QueueIndAss
PreemptionIndAss
ForcedHolndAss
ForcedHolndHo
PreemptionIndHo
QueueIndHo
Relationship
If this parameter is set to 0 and does not support EMLPP, it is invalid.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.4.17 EMLPP channel reserved rate

Full Name
EMLPP channel reserved rate
Abbreviation
emlppThs
Managed Object
eMLPP Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the proportion of channels reserved for high-priority subscribers when you enable the eMLPP service function, which al-
Description
lows high-priority users to access channels first.
Instance
BSC
0..100
Unit
Default Value
2-297
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
special parameter, the default value is not researve.

The parameter increase, high priority user can be
Change Mode
Offline
Related features
Related Parameters
EMLPPThs
If the parameter UseCelleMLPPThs is enabled,
Relationship
the cell-level parameter EMLPPThs should be enabled. If not, the

BSC-level
parameter EMLPPThs should be enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5 eMLPP User Priority Configuration

(GEmlppUserPriority)
2.5.1 eMLPP User Priority Configuration ID
Full Name
eMLPP User Priority Configuration ID
Abbreviation
GEmlppUserPriority
Managed Object
eMLPP User Priority Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
eMLPP User Priority Configuration ID
Instance
None
1..15
2-298
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Information Configuration->eMLPP Configuration->eMLPP User Priority

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.2 User priority

Full Name
User priority
Abbreviation
userPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter, not requiring manual setting, provides the priorities corresponding to a group of eMLPP parameters. The given priorities are equal
Description
to the priority level information contained in the A interface messages.
Instance
BSC
1..15
Unit
N/A
Default Value
1
2-299
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The value is fixed to 1-15.

The value is fixed to 1-15.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.3 Strategy for preemption when assign

Full Name
Strategy for preemption when assign
Abbreviation
assPreemptstrategy
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the preemption strategy in the assignment
process when there are no available channels.
Its value corresponds to 15 levels of priority (1 to 15) which are defined
by the parameter "Priority" in the Assignment Command message or
Description
Handover Request message from the CN.
Instance
BSC
0: Only forced handover
1: First forced handover, if fail, forced release
2: First forced release
Unit
N/A
2-300
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Relatively, forced handovers have less effect
on low-priority users.
Setting this parameter to "Only forced handover"
has the least effect on low-priority users. In this case, however,
high-priority users are less likely to access channels. If you set
the parameter to "First forced handover, if fail, forced release",
high-priority users are more likely to access channels, but will spend
more time in accessing a channel when a forced handover fails. If

you set the parameter to "First forced release", forced releases will
be carried out if possible. In this case, high-priority users are
more likely to preempt channels, but low-priority users will be affected
more.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.4 Strategy for preemption when handover

Full Name
Strategy for preemption when handover
Abbreviation
hoPreemptstrategy
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-301
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the preemption strategy in handovers when

there are no available channels.
Its value corresponds to 15 levels of priority (1 to 15) which are defined
by the parameter "Priority" in the Assignment Command message or
Description
Handover Request message from the CN.
Instance
BSC
0: Only forced handover
1: First forced handover, if fail, forced release
2: First forced release
Unit
N/A
Default Value
Default Value
Relatively, forced handovers have less effect
on low-priority users.
Setting this parameter to "Only forced handover"
has the least effect on low-priority users. In this case, however,
high-priority users are less likely to access channels. If you set
the parameter to "First forced handover, if fail, forced release",
high-priority users are more likely to access channels, but will spend
more time in accessing a channel when a forced handover fails. If

you set the parameter to "First forced release", forced releases will
be carried out if possible. In this case, high-priority users are
more likely to preempt channels, but low-priority users will be affected
more.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-302
SJ-20130408140048-016|2013-07-17(R1.0)
2.5.5 Max forced handover times when assign

Full Name
Max forced handover times when assign
Abbreviation
assForcedHoTry
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum number of forced handover
attempts when there are no available channels in the cell during an
assignment. After a forced handover is initiated, if one of the following
three events happens and the maximum number is not reached, more
forced handovers can be attempted:
(1) The subscriber whose services are forcibly handed over fails to
request for channels in its adjacent cells.
(2) The forced handover fails.
(3) The subscriber whose services are forcibly handed over fails to
Description
release the channel in the time specified by the parameter ForceHoWait.
Instance
BSC
1..5
Unit
N/A
Default Value
Default Value
Setting the default value to 1 increases the
success rate of forced handovers and affects fewer users.
For high-priority users, more forced handovers
can be attempted if you have not enabled the forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-303
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.5.6 Max forced handover times when handover

Full Name
Max forced handover times when handover
Abbreviation
hoForcedHoTry
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum number of attempted forced
releases when there are no available channels in the cell during a
handover. After a forced handover is started, if one of the following three
events happens and the maximum number is not reached, more forced
handovers can be attempted:
(1) The user whose services are handed over forcedly fails to request
for channels in its adjacent cells.
(2) The forced handover fails.
(3) The user whose services are handed over forcedly fails to release
Description
the channel in ForceHoWait.
Instance
BSC
1..5
Unit
N/A
Default Value
Default Value
For high-priority users, more forced handovers
can be attempted if you have not enabled the forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-304
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.7 Max forced release times when assign

Full Name
Max forced release times when assign
Abbreviation
assForcedRelTry
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum number of attempted forced releases when there are no available channels in the cell during an assignment. After a forced release is started, if the user fails to release the
channel in ForceRelWait and the maximum number is not reached, more
Description
forced releases can be attempted.
Instance
BSC
1..3
Unit
N/A
Default Value
Default Value
For high-priority users, more attempted forced
releases can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-305
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.8 Max forced release times when handover

Full Name
Max forced release times when handover
Abbreviation
hoForcedRelTry
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum number of attempted forced releases when there are no available channels in the cell during a handover.
After a forced release is started, if the user fails to release the channel in
ForceRelWait and the maximum number is not reached, more forced re-
Description
leases can be attempted.
Instance
BSC
1..3
Unit
N/A
Default Value
Default Value
For high-priority users, more attempted forced
releases can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-306
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.9 Preemption duration when assign

Full Name
Preemption duration when assign
Abbreviation
assPreempTimer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the time period in which preemptions (forced
handovers or releases) can be initiated when there are no available
channels in the cell during an assignment. If the duration expires,
services must queue (The queuing period includes the preemption time)
and no more forced handovers or releases will be initiated.
Start: The assignment triggers a preemption, that is, attempted forced
handovers or releases begin.
Stop: A channel is accessed.
Description
At expiry: Forced handovers or releases will not be attempted any more.
Instance
BSC
25..130
Unit
100ms
Default Value
40
Default Value
Four seconds are enough for attempting multiple
preemptions.
For high-priority users, a higher value can
be set to make it easier to access channels through preemption.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
RmsT11
AssPreempTimer
2-307
SJ-20130408140048-016|2013-07-17(R1.0)
At the same priority, RmsT11 must be higher than AssPreempTimer.

Relationship
At the same priority, AssForceRelTimer must be lower than

AssPreempTimer.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.10 Preemption duration when handover

Full Name
Preemption duration when handover
Abbreviation
hoPreempTimer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the time period in which preemptions (forced
handovers or releases) can be initiated when there are no available
channels in the cell during a handover. If the duration expires, services
must queue (The queuing period includes the preemption time) and no
more forced handovers or releases will be initiated.
Start: The handover triggers a preemption, that is, attempted forced
handovers or releases begin.
Description
At expiry: Forced handovers or releases will not be attempted any more.
Instance
BSC
10..130
Unit
100ms
Default Value
20
Default Value
Enough for preemption during a handover
2-308
SJ-20130408140048-016|2013-07-17(R1.0)
For high-priority users, a higher value can
be set to make it easier to access channels through preemption.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
RmsTqho
HoForceRelTimer
At the same priority, RmsTqho must be higher than HoPreempTimer.
Relationship
At the same priority, HoForceRelTimer must be lower than

HoPreempTimer.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.11 Timer for start forced release when assign

Full Name
Timer for start forced release when assign
Abbreviation
assForceRelTimer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If there are no available channels in the cell during an assignment and
both forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated during the assignment.
Description
At expiry: Forced releases will be attempted.
Instance
BSC
2-309
SJ-20130408140048-016|2013-07-17(R1.0)
20..125
Unit
100ms
Default Value
30
Default Value
The default value includes the time required
to access a channel through forced release.

For high-priority users, you can set this parameter

to a lower value for earlier forced releases if you have enabled the
forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
AssPreempTimer
Relationship
At the same priority, AssForceRelTimer must

be lower than AssPreempTimer.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.12 Timer for start forced release when handover

Full Name
Timer for start forced release when handover
Abbreviation
hoForceRelTimer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-310
SJ-20130408140048-016|2013-07-17(R1.0)
If there are no available channels in the cell during a handover and both
forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated.
Description
At expiry: Forced releases will be attempted.
Instance
BSC
10..125
Unit
100ms
Default Value
13
Default Value
The default value includes the time required
to access a channel through forced release.

For high-priority users, you can set this parameter

to a lower value for earlier forced releases if you have enabled the
forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
HoPreempTimer
Relationship
At the same priority, HoForceRelTimer must be lower than

HoPreempTimer.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.5.13 Interval for search forced handover target when assign

Full Name
Interval for search forced handover target when assign

2-311
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
assForceHoInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced handover is initiated during the
assignment.
Stop: Forced releases are attempted after the timer expires.
Description
At expiry: Another search for the forced handover target will be done.
Instance
BSC
5..20
Unit
100ms
Default Value
Default Value
The default value makes it possible to access

channels through multiple attempted forced handovers with a reasonable
frequency.
For high-priority users, a shorter interval
can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-312
SJ-20130408140048-016|2013-07-17(R1.0)
2.5.14 Interval for search forced handover target when handover

Full Name
Interval for search forced handover target when handover
Abbreviation
hoForceHoInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced handover is initiated.
Stop: Forced releases are attempted after the timer expires.
Description
At expiry: Another search for the forced handover target will be done.
Instance
BSC
5..20
Unit
100ms
Default Value
Default Value

channels through multiple attempted forced handovers with a reasonable
frequency.
can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-313
SJ-20130408140048-016|2013-07-17(R1.0)
2.5.15 Interval for search forced release target when assign

Full Name
Interval for search forced release target when assign
Abbreviation
assForceRelInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced release is initiated during the
assignment.
Stop: The timer for preemption expires.
Description
At expiry: Another search for the forced release target will be done.
Instance
BSC
5..20
Unit
100ms
Default Value
Default Value

channels through multiple attempted forced releases with a reasonable
frequency.
can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-314
SJ-20130408140048-016|2013-07-17(R1.0)
2.5.16 Interval for search forced release target when handover

Full Name
Interval for search forced release target when handover
Abbreviation
hoForceRelInterval
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced release is initiated during the
handover.
Stop: The timer for preemption expires.
Description
At expiry: Another search for the forced release target will be done.
Instance
BSC
5..20
Unit
100ms
Default Value
Default Value

channels through multiple attempted forced releases with a reasonable
frequency.
can be set.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-315
SJ-20130408140048-016|2013-07-17(R1.0)
2.5.17 Queue timer for assign

Full Name
Queue timer for assign
Abbreviation
rmsT11
Managed Object
3GPP Name
T11
3GPP Reference
3GPP TS 48.008
This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during an assignment. If
no resource is obtained during the time period, the assignment fails.
Start: No channel is available for the assignment and the assignment
queues.
At expiry: The channel allocation will fail and an assignment failure
Description
message will be sent to the MSC.
Instance
BSC
10..150
Unit
100ms
Default Value
60
Default Value
The default value ensures that there is enough

time for channel releases and it will not be long before a channel
allocation.
You can set this parameter to a reasonably
higher value.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
AssPreempTimer
Relationship
At the same priority, RmsT11 must be higher

than AssPreempTimer.
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-316
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.5.18 Queue timer for handover

Full Name
Queue timer for handover
Abbreviation
rmsTqho
Managed Object
3GPP Name
Tqho
3GPP Reference
3GPP TS 48.008
This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during a handover. If no
resource is obtained during the time period, the handover fails.
Start: No channel is available for the handover and the handover queues.
Description
At expiry: The channel allocation and handover attempt will fail.
Instance
BSC
10..150
Unit
100ms
Default Value
25
Default Value
The default value ensures that there is enough

time for channel releases and it will not be long before a channel
allocation.
The handover queuing time should not be too
long because subsequent measurement reports can trigger new
handover
attempts.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
HoPreempTimer
Relationship
At the same priority, RmsTqho must be higher than HoPreempTimer.
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
2-317
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6 BSS Function PS (GBssFunctionPS)

2.6.1 BSC PS ID
Full Name
BSC PS ID
Abbreviation
GBssFunctionPS
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC PS ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-318
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Information Configuration->BSS Function PS
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.2 Bvc flow control period

Full Name
Bvc flow control period
Abbreviation
CellFcPer
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter is the BVC leakage ratio measurement period in the
BVC Flow Control process, that is, BVC long measurement period.
To provide reference to the BVC flow control at SGSN side, the BSSGP
process at BSS side periodically measures the current BVC leakage
ratio. BSC initiates the BVC flow control procedure unconditionally
when the long measurement timer overflows. SGSN confirms to BSC
if the difference of leakage ratios between the two times exceeds
CellFcThs.
BSC also initiates BVC flow control procedure with SGSN confirmation
if the short measurement timer overflows, and the difference of the
leakage ratio between the two timers exceed CellFcThs. The conditions
of timer start, stop, and timeout actions are as follows:
Timer start: Cell is being created.
Timer stop: The cell is blocked or deleted.
Description
Timeout action: BVC flow control process is initiated unconditionally.
Instance
BSC
100..65535
Unit
10ms
Default Value
1000
Default Value
Recommended value from field experience
2-319
SJ-20130408140048-016|2013-07-17(R1.0)
The default value 1000 is recommended. A shorter period may increase

the load at the Gb interface. A longer period may cause the failure of
the BVC flow control.
A too large parameter value may result in a delay of flow control.
An improperly-set parameter value will cause intermittent download and

influence indexes relevant to throughput efficiency.
Set an appropriate period according to the settings of the SGSN. Make
sure that the parameter value is matching with the SGSN.
Change Mode
Offline
Related features
ZGB-03-05-016 Downlink BVC Flow Control
Related Parameters
BVCFlowCtrl
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.6.3 MS flow control period

Full Name
MS flow control period
Abbreviation
MsFcPer
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
2-320
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the MS leakage ratio measurement period in the MS

Flow Control process.
For reference of flow control at the SGSN side, the BSSGP process at
the BSS side periodically measures the current leakage ratio of each
MS. When the statistic timer overflows, the MS Flow Control process
is initiated unconditionally.
Timer start: BSSGP receives the downlink LLC frame at idle status.
Timer stop: downlink LLC frame transmission is done.
Description
Timeout action: MS flow control process is initiated unconditionally.
Instance
BSC
100..65535
Unit
10ms
Default Value
600
Default Value

The default value 600 is recommended. A shorter
period may increase the load at the Gb interface. A longer period
may cause the failure of the MS flow control.
Change Mode
Offline
Related features
ZGB-03-05-017 Downlink MS Flow Control
Related Parameters
MSFlowCtrl
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.6.4 Max times of radio access capabilities update retry

Full Name
Max times of radio access capabilities update retry
2-321
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
UpdateMax
Managed Object
BSS Function PS
3GPP Name
RA-CAPABILITY-UPDATE-RETRIES
3GPP Reference
3GPP TS48.018
This is a BSSGP layer parameter used to specify the maximum number
of times the BSS retries to obtain the radio access capability of an MS
via the Radio Access Capability Update procedure when the BSS does
not have the information of the access capabilities of MSs. The access
capabilities are required by the BSS for assigning a proper packet
channel to each MS when the MS is establishing the uplink TBF.
The related procedure is as follows:
1. The BSS sends the RADIO ACCESS CAPABILITIES UPDAE
message to the SGSN.
2. If the BSS does not receive the RADIO ACCESS CAPABILITIES
UPDAE ACK/NACK message from the SGSN, the BSS re-starts the
procedure.
3. The BSC retries the procedure for the number of times specified
by UpdateMax, and, if still not receives returned messages, stops the
RADIO ACCESS CAPABILITIES UPDATE procedure and notifies the
Description
OMS.
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value
is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
2-322
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.5 Max times of PFC create retry

Full Name
Max times of PFC create retry
Abbreviation
DownloadBssPfcMax
Managed Object
BSS Function PS
3GPP Name
DOWNLOAD-BSS-PFC-RETRIES
3GPP Reference
3GPP TS48.018
Max retry times to create PFC. If "Creat BSS PFC" is not received before
timer BSSGPT6 is timeout, BSS sends "Download BSS PFC" message
according to max times of retrying to create PFC. If "Create BSS PFC"
is not received still after trying DownLoadBSSPRCMax+1, the process is
Description
completed and inform O&M.
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value


is normal.
Change Mode
Offline
Related features
Related Parameters
PFCSupport
Relationship
Related Interfaces
in the BSC.
Gb
2-323
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.6 Max times of PFC modify retry

Full Name
Max times of PFC modify retry
Abbreviation
ModifyBssPfcMax
Managed Object
BSS Function PS
3GPP Name
MODIFY-BSS-PFC-RETRIES
3GPP Reference
3GPP TS48.018
Max retry times to modify PFC. If "Modify BSS PFC Ack" is not received
before timer BSSGPT8 is timeout, BSS sends "Modify BSS PFC"
message according to max times of retrying to modify PFC. If "Modify
BSS PFC Ack" is not received still after trying ModifyBssPFCMax +1, the
Description
process is completed and inform O&M.
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value
is normal.
Change Mode
Offline
Related features
Related Parameters
PFCSupport
2-324
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.7 Max times of Bvc block retry

Full Name
Max times of Bvc block retry
Abbreviation
BVCBlkMax
Managed Object
BSS Function PS
3GPP Name
BVC-BLOCK-RETRIES
3GPP Reference
3GPP TS48.018
If the PTP BVC must be blocked due to OAM intervention or equipment
faults (disable blocking/unblocking the signaling BVC), BSS will first set
the BVC status as Blocked and discard the uplink service data.
To notify SGSN to stop sending downlink data, BSS initiates BVC
blocking procedure. BSC repeats BVC blocking procedure after sending
BVC BLOCK message to SGSN. If BSC fails to receive BVC BLOCK
ACKNOWLEDGE message from SGSN in BSSGPT1, then BVC
blocking repeats for a maximum of N times.
BSC stops BVC blocking and notifies OMS for N times if there is no
Description
answer. N depends on maximum retries of BVC BLOCK.
Instance
BSC
3..10
Unit
N/A
Default Value
Default Value
2-325
SJ-20130408140048-016|2013-07-17(R1.0)


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.8 Max times of Bvc unblock retry

Full Name
Max times of Bvc unblock retry
Abbreviation
BVCUblkMax
Managed Object
BSS Function PS
3GPP Name
BVC-UNBLOCK-RETRIES
3GPP Reference
3GPP TS48.018
If the PTP BVC must be unblocked due to the OAM intervention
or recovery of the equipment fault (disable blocking/unblocking the
signaling BVC), BSS will first set the BVC status as Unblocked.
To notify SGSN to start sending the downlink data, BSS will initiate the
BVC unblocking procedure. BSC repeats the BVC unblocking procedure
after sending the BVC UNBLOCK message to SGSN. If BSC fails to
receive the BVC UNBLOCK ACKNOWLEDGE message from SGSN in
BSSGPT1 then BVC unblocking repeats for a maximum of N times.
BSC stops BVC unblocking and notifies OMS for N times if there is no
Description
answer. N depends on maximum retries of BVC UNBLOCK.
Instance
BSC
2-326
SJ-20130408140048-016|2013-07-17(R1.0)
3..10
Unit
N/A
Default Value
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.9 MAX times of Bvc reset retry

Full Name
MAX times of Bvc reset retry
Abbreviation
BVCRestMax
Managed Object
BSS Function PS
3GPP Name
BVC-RESET-RETRIES
3GPP Reference
3GPP TS48.018
2-327
SJ-20130408140048-016|2013-07-17(R1.0)
To keep the initial status consistent between the two BVC sides, the
Reset BVC process must be initiated in the following cases:
For faults that affect NSE, BSC initiates Signaling BVC RESET
procedure. For faults that affect a single BVC, BSC initiates the PTP
BVC RESET procedure. BSC initiates all PTP BVC RESET procedure
for corresponding NSE after a signaling BVC reset procedure.
BSC repeats the BVC RESET procedure after sending BVC
RESET message to SGSN and if BSC fails to receive BVC RESET
ACKNOWLEDGE
message from SGSN in BSSGPT2. The BVC RESET process could be
repeated for N times at most. If there is no answer after the N times,
BSC stops BVC RESET and notifies OMS. N depends on maximum
Description
retries of BVC RESET.
Instance
BSC
0..255
Unit
N/A
Default Value
Default Value
is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-328
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.10 Max times of suspend retry

Full Name
Max times of suspend retry
Abbreviation
suspendMax
Managed Object
BSS Function PS
3GPP Name
SUSPEND-RETRIES
3GPP Reference
3GPP TS48.018
MS first sends a SUSPEND message to BSS over SDCCH when a
Class B GPRS MS is about to initiate a voice service. BSS initiates
suspending procedure to SGSN to notify SGSN to stop sending PS
paging and downlink packet data after BSS receives the message.
BSC repeats suspending procedure after sending SUSPEND message
to SGSN. If BSC fails to receive SUSPEND ACK/NACK message from
SGSN in BSSGPT3 then BSC repeats the suspending procedure for a
maximum of N times.
BSC stops suspending and notify OMS for N times if there is no answer.
Description
N depends on the maximum number of suspending retries.
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
ResumeSetOpt
Relationship

process is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-329
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.11 Max times of resume retry

Full Name
Max times of resume retry
Abbreviation
resumeMax
Managed Object
BSS Function PS
3GPP Name
RESUME-RETRIES
3GPP Reference
3GPP TS48.018
This parameter is a BSSGP layer parameter. When GPRS-attached MS
leaves a special mode, BSS adopts one of the following strategies:
Notify MS of carrying out "route area upgrade".
Notify SGSN of recovering the GPRS service.
In case of Routing Area Update, MS and SGSN directly negotiate GMM
status. With the Resume method (usually for the MS in the packet
transmission status), BSS will initiate the RESUME process to SGSN
for the purpose of notifying SGSN to start the normal packet downlink
transmission action. If BSC fails to receive the RESUME ACK/NACK
message from SGSN in BSSGPT4, then repeats Resume procedure
for a maximum of N times.
BSC stops the Resume procedure and notify OMS N times if there is no
Description
answer. N depends on the parameter ResumeMax.
Instance
BSC
0..10
Unit
N/A
Default Value
Default Value


is normal.
Change Mode
Offline
Related features
N/A
Related Parameters
ResumeSetOpt
2-330
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship

process is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.12 Max allowed number of continuous losses of uplink data

blocks(N3101)
Full Name
Max allowed number of continuous losses of uplink data blocks(N3101)
Abbreviation
N3101
Managed Object
BSS Function PS
3GPP Name
N3101
3GPP Reference
3GPP TS44.060
When the network after setting USF, receives a valid data block from the
mobile station in a block assigned for this USF, it will reset counter N3101.
The network will increment counter N3101 for each USF for which no data
is received. N3101max shall be greater than 8. If N3101 = N3101max,
the network shall stop the scheduling of RLC/MAC blocks from the mobile
Description
station for this USF and start timer T3169.
Instance
BSC
9..255
Unit
N/A
Default Value
50
Default Value
cut down "abnormal release number of uplink TBF by N3101 overflow",
improve the KPI
2-331
SJ-20130408140048-016|2013-07-17(R1.0)
The smaller this parameter is, the lower the tolerbility the network side for
the improper uplink, the higher the possibility of the uplink TBF released
improperly. When this parameter is set to a larger value, if the network
side cannot receive corresponding uplink data blocks caused by the MS
itself, the network side still allocates uplink resources for the MS, which
leads to a waste of system resources. During PS basic measurement,

"abnormal release number of uplink TBF by N3101 overflow" records
that the uplink TBF improperly released is always due to poor link quality
on the Abis interface, poor air interface quality, unreasonable network
coverage, and the behaviour of the MS itself (such as cell reselection).
In addition, users can appropriately add the overflow threshold of N3101,
to reduce "abnormal release number of uplink TBF by N3101 overflow" ,
and to improve the network quality to some extent.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.13 Times of packet uplink ACK/NACK retries(N3103)

Full Name
Times of packet uplink ACK/NACK retries(N3103)
Abbreviation
N3103
Managed Object
BSS Function PS
3GPP Name
N3103
3GPP Reference
3GPP TS44.060
2-332
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the counter N3103, which is a RLC/MAC layer

parameter in the Packet Control Unit (PCU). The counter N3103 counts
the number of Packet Uplink ACK/NACK retry attempts.
In the process of packet uplink transmission, if the network detects that
the TBF is completed (CV=0, and V(Q)=V(R)), and has received all
RLC data blocks, the network should send a Packet Uplink ACK/NACK
message, set the Final ACK Indicator (FAI) to 1, adds a legal RRBP field
in the header of the RLC/MAC control block, and clears the counter
N3103.
If the MS receives the PACKET UPLINK ACK/NACK message (FAI=1)
from the network, the MS should send the PACKET CONTROL ACK
message on the block specified by the RRBP and releases the TBF.
If the network does not receive the PACKET CONTROL ACK message
on the block specified by the RRBP, the counter N3103 is increased by 1
and the PACKET UPLINK ACK/NACK message is retransmitted.
If the value of counter N3103 exceeds the limit specified by the
parameter N3103max, the network starts the timer T3169. Upon timeout
Description
of T3169, the network can use the TFI and USF resources again.
Instance
BSC
0..255
Unit
N/A
Default Value
10
Default Value
cut down "abnormal release number of uplink TBF by N3103 overflow"

to improve KPI and the value should not be too large because N3103 is
TBF release counter.
the lower the value, the higher the number of uplink TBF abnormal
release by N3103;the higher the value, the more the network resources
are wasted when cell reselection, but the higher the network KPI.In live
network, N3103 should be properly increased to cut down the number of

uplink TBF abnormal release by N3103 according to the Um interface
Abis link qualityMS own action, etc.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-333
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.14 Max allowed number of continuous losses of uplink

RLC/MAC control message(N3105)
Max allowed number of continuous losses of uplink RLC/MAC control
Full Name
message(N3105)
Abbreviation
N3105
Managed Object
BSS Function PS
3GPP Name
N3105
3GPP Reference
3GPP TS44.060
When the network after sending a RRBP field in the downlink RLC
data block or in Iu mode also RLC/MAC control block, receives a valid
RLC/MAC control message from the mobile station, it will reset counter
N3105. The network will increment counter N3105 for each allocated
data block for which no RLC/MAC control message is received for this
Description
TBF. The value of N3105max is network dependent.
Instance
BSC
0..255
Unit
N/A
Default Value
15
Default Value
cut down "abnormal release number of downlink TBF by N3105
overflow", improve the KPI

the lower the value, the higher the number of downlink TBF abnormal
release by N3105;the higher the value, the more the network resources
are wasted when cell reselection, but the higher the network KPI.In live
network, N3105 should be properly increased to cut down the number of

uplink TBF abnormal release by N3105 according to the Um interface
Abis link qualityMS own action, etc.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-334
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.15 Bvc flow control support

Full Name
Bvc flow control support
Abbreviation
BVCFlowCtrl
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
BVC flow control occurs at Gb interface between SGSN and BSS,
and only in downlinks. BSS provides control parameters and SGSN
executes, in order to avoid one BVC on BSS to abandoning some LLC
data because of the overtime caused by grouping channel is too busy
(too many LLC frame caches) and to avoid abandoning new downlink
LLC data because of limit of memory resource (overflow of LLC frame
caches).
BSSGP process at BSS side counts current leaking rate of BVC
periodically (including short statistics and long statistics). If the long
statistics timer overflows, this parameter unconditionally initiates the
BVC flow control process; if the discrepant range of adjacent leaking
rates is over CellFcThs, acknowledgement by SGSN is required. If
the short statistics timer overflows and if discrepant range of adjacent
leaking rates is over CellFcThs, this parameter initiates the BVC flow
Description
control process, and acknowledgement by SGSN is required.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
2-335
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Gb Interface flow control

The cell flow control is enabled at the Gb
interface by default. Enable or disable the BVC flow control in
consideration
of the flow control algorithm used in the core network.
Change Mode
Offline
Related features
ZGB-03-05-016 BVC Flow Control (in DL)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.16 MS flow control support

Full Name
MS flow control support
Abbreviation
MSFlowCtrl
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
2-336
SJ-20130408140048-016|2013-07-17(R1.0)
MS flow control occurs at Gb interface between SGSN and BSS, and only
in downlinks. BSS provides control parameters and SGSN executes,
to avoid one MS on BSS to abandoning some LLC data because of the
overtime caused by grouping channel is too busy (too many LLC frame
caches) and to avoid abandoning new downlink LLC data because of
limit of memory resource (overflow of LLC frame caches).
The BSSGP process at the BSS side periodically measures the current
leakage ratio of MS. When the statistic timer overflows, the MS Flow
Description
Control process is initiated unconditionally.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Gb Interface flow control

Enable or disable the MS flow control in consideration
of the cell flow control granularity and the MS flow control support
in the CN.
Change Mode
Offline
Related features
ZGB-03-05-017 MS Flow Control (in DL)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.17 Bvc flow control R MIN value

Full Name
Bvc flow control R MIN value
2-337
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
BVCFlowCtrlRMin
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
This is the minimum value of leaking rate R in reported BVC flow control
parameters under all kinds of flow control mode, that is, the reported pa-
Description
rameter R must be equal or over the set value, in the unit of 100 bps.
Instance
BSC
10..1000
Unit
N/A
Default Value
300
Default Value
Depends on the Min theoretical speed per GPRS PDCH

The parameter value depends on the flow control

of the CN. If the actual rate impacts the transmission of downlink

data when the default value is used, increase the parameter value
in the case of uncontinuous transmission or decrease the parameter
value in the case of too fast transmission.
Change Mode
Offline
Related features
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Relationship
This parameter is valid when the flow control

switch is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-338
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.18 MS flow control R MIN value

Full Name
MS flow control R MIN value
Abbreviation
MSFlowCtrlRMin
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
This is the minimum value of leaking rate R in reported MS flow control
parameters under all kinds of flow control mode, that is, the reported pa-
Description
rameter R must be equal or over the set value, in the unit of 100 bps.
Instance
BSC
10..1000
Unit
N/A
Default Value
300
Default Value
Depends on the Min theoretical speed per GPRS PDCH

The parameter value depends on the flow control

of the CN. If the actual rate impacts the transmission of downlink

data when the default value is used, increase the parameter value
in the case of uncontinuous transmission or decrease the parameter
value in the case of too fast transmission.
Change Mode
Offline
Related features
Related Parameters
MSFlowCtrl
Relationship
This parameter is valid when the flow control

switch is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-339
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.19 Flow control mode

Full Name
Flow control mode
Abbreviation
FlowCtrlMode
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
BSC has different flow control modes to report flow control parameters
to SGSN. The modes are as follows:
1: Mode 1: Report flow control parameters according to actual traffic
on radio interface counted at BSC;
2: Mode 2: Report flow control parameters according to max traffic that
the cell can provide;
3: Mode 3: Reserved
"Flow control mode 1 parameter" is enabled if selecting "mode 1"; "Flow
Description
control mode 2 parameter" is enabled if selecting "mode 2".
Instance
BSC
1..3
Unit
N/A
Default Value
Default Value
leak rate caculate by real Um speed

Take the equipment actually used in the CN

when setting the parameter value. Select Mode 1 for ERICSSON SGSN.
Select Mode 2 for HUWWEI equipment. And select Mode 3 when both
ERICSSON
and HUAWEI equipment are used.
Change Mode
Offline
Related features
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
2-340
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.20 PFC support

Full Name
PFC support
Abbreviation
PFCSupport
Managed Object
BSS Function PS
3GPP Name
PFC
3GPP Reference
3GPP TS48.018
This parameter is broadcast through SI13, PSI1, and PSI13 messages.
In EGPRS system with broadband features, the QoS concept of UMTS
has been imported, which enables transferring the negotiable QoS
configuration to BSS through Gb interface.
BSS can maintain QoS subscribing information through function PFC
(packet flow context) flow, which include acquiring QoS, modifying
QoS, and deleting QoS signaling flow. Network notifies MS if the
network supports PFC flow through the system message parameter
PFC_FEATURE_MODE. If yes, the MS will add PFI when establishing
uplink TBF (PACKET RESOURCE REQUEST). BSS can decide QoS
Description
as MS requires according to PFI.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Change Mode
Consider service type and CN's implementation

To enable or disable the PFC function, adjust
the status of this switch in consideration of the adjustment at the
CN side at the same time.
Offline
2-341
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.21 Net operation mode

Full Name
Net operation mode
Abbreviation
NMO
Managed Object
BSS Function PS
3GPP Name
NMO
3GPP Reference
3GPP TS44.060
There are three network operation modes:
Network Operation Mode 1: The network sends to the "GPRS-attached"
MS the CS paging message on the same channel of GPRS paging
channel (packet or CCCH paging channel), or on the GPRS traffic
channel (when it is assigned with a packet data channel). Mode 1
indicates that MS only need to monitor one paging channel.
Network operation mode 1 is required while configuring PBCCH; Gs
interface is required while configuring network operation mode 1.
Network Operation Mode 2: The network sends to the GPRS-attached
MS the CS paging message on the CCCH paging channel, which is also
for GPRS paging. Mode 2 indicates that the MS only need to monitor
CCCH paging channel, but when BSC allocates a packet data channel,
the CS paging message uses the CCCH paging channel.
Network Operation Mode 3: The network sends to the "GPRS-attached"
MS the CS paging message on the CCCH paging channel, and sends
Description
the GPRS paging message either on the packet paging channel (if there
2-342
SJ-20130408140048-016|2013-07-17(R1.0)
is any in the cell) or on the CCCH paging channel. Mode 3 indicates that
the MS must monitor two paging channels (if packet paging channel is
available in the cell) in order to receive CS or GPRS paging message.
Instance
BSC
0: Net operation mode 1
Unit
N/A
Default Value
Default Value
Depends On the configuration of PBCCH, Gb Interface and Gs Interface
at CN
If PBCCH is configured at Gs interface, select
Network operation mode 1. If neither Gs interface nor PBCCH exists
in the network, select Network operation mode 2. If no Gs interface
exists in the network, but PBCCH is configured, Network operation

mode 3 can be selected. In this network operation mode, the MS needs
to listen the packet paging channel and the CCCH paging channel.
Change Mode
Offline
Related features
ZGB-03-05-009 Network Mode of Operation (NMO) 1~3
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.22 Page coordination support

Full Name
Page coordination support
Abbreviation
PagCoordination
Managed Object
BSS Function PS
2-343
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
BSS_PAGING_COORDINATION
3GPP Reference
3GPP TS44.060
This parameter determines if intra-BSC cell supports CS page
coordination. This parameter is broadcast in GPRS CELL OPTIONS
through SI13, PSI1, and PSI13 messages. It is invalid when the NMO
value is 1.
Page coordination means that CS service paging can be sent to a
subscriber on the PS service channel PACCH when the MS is in the PS
Description
transmission state.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Depends on GPRS Support Configuration

Enable this function if CS paging needs to
be processed by the MS in PS transmission state. Take the possibility
of PS service drop into account when enabling the function. Disable
this function if the drop of PS service may occur due to CS paging

processing. When this function is disabled, CS paging will not be
processed when the MS is in PS transmission state.
Change Mode
Offline
Related features
ZGO-02-01-001 Paging Coordination
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-344
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.23 NACC support

Full Name
NACC support
Abbreviation
NACCSupport
Managed Object
BSS Function PS
3GPP Name
NACC
3GPP Reference
3GPP TS 44.060
This parameter indicates whether Network Assisted Cell Change(NACC)
is enabled.
For the MS, NACC is part of the GERAN Feature Package 1. The
function includes:
1. The MS in PS transmission state can receive the system messages
required for accessing the new cell.
2. The MS notifies the network (CCN mode) when deciding to perform a
cell reselection.
Therefore, NACC needs to be used together with CCN mode.
For the network, the NACC function includes:
1. After MS performs cell reselection, the network sends the system
messages of neighbor cells of the new cell on the PACCH.
2. After receiving the cell change information from the MS, the network
sends to the MS the system messages of recommended neighbor cells
or other neighbor cells.
When NACC is used together with CCN, Packet (P)SI Status functions,
Description
the cell reselection time can be reduced.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value

It is recommended to enable the NACC function

to shorten the interval between cell reselections, relieve the influenced

on packet services being processed, and thus increase the packet
service
rate.
Change Mode
Offline
Related features
ZGO-02-02-010 Network-assisted Cell Change
2-345
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
CCNActive
SIStatusInd
CCNSupport
Relationship
CCNActive, SIStatusInd, and CCNSupport must be enabled at the same

time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.24 LLC Transfer for SAPI0(Reserved)

Full Name
LLC Transfer for SAPI0(Reserved)
Abbreviation
LLCTranSAPI0
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI0 (Reserved) services. Generally, this function is not
enabled for this type of data. The purpose of this function is to transfer
the LLC frames from the source cell cache to the target cell when an MS
performs cell reselection. This can ensure the continuity of downlink data
Description
after cell reselection.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
2-346
SJ-20130408140048-016|2013-07-17(R1.0)
The data frame transfer function for subscribers with SAPI=3, 5, 9, 11 is

recommended to be enabled. For GMM signaling with SAPI=1, the frame
transfer function has no protection mechanism, such as signaling timer

and re-transmission, and the signaling frame length is comparatively
short, and thus the frame transfer function is recommended to be
disabled. The services represented by other SAPI values are scarcely
used, and this function is also recommend to be disabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.25 LLC Transfer for SAPI1(LLGMM)

Full Name
LLC Transfer for SAPI1(LLGMM)
Abbreviation
LLCTranSAPI1
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI1 (LLGMM) services. Generally, this function is not
enabled for the GMM signaling. The purpose of this function is to transfer
Description
Instance
BSC
2-347
SJ-20130408140048-016|2013-07-17(R1.0)
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.26 LLC Transfer for SAPI2(TOM2)

Full Name
LLC Transfer for SAPI2(TOM2)
Abbreviation
LLCTranSAPI2
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
2-348
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI2 (TOM2) services. Generally, this function is not
enabled for TOM2 services. The purpose of this function is to transfer
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.27 LLC Transfer for SAPI3(User-Data)

Full Name
LLC Transfer for SAPI3(User-Data)

2-349
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
LLCTranSAPI3
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI3 (User-Data) services. Generally, this function is
enabled for user data. The purpose of this function is to transfer the LLC
frames from the source cell cache to the target cell when an MS performs
cell reselection. This can ensure the continuity of downlink data after cell
Description
reselection.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-350
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI4
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI4 (Reserved) services. Generally, this function is not
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-351
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI5
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
reselection.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-352
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI6
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI6 (Reserve) services. Generally, this function is not
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
2-353
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.31 LLC Transfer for SAPI7(LLSMS)

Full Name
LLC Transfer for SAPI7(LLSMS)
Abbreviation
LLCTranSAPI7
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI7 (LLSMS) services. Generally, this function is not
enabled for LLSMS services. The purpose of this function is to transfer
Description
Instance
BSC
2-354
SJ-20130408140048-016|2013-07-17(R1.0)
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.32 LLC Transfer for SAPI8(TOM8)

Full Name
LLC Transfer for SAPI8(TOM8)
Abbreviation
LLCTranSAPI8
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
2-355
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI8(TOM8) services. Generally, this function is not enabled for TOM8 services. The purpose of this function is to transfer the
LLC frames from the source cell cache to the target cell when an MS performs cell reselection. This can ensure the continuity of downlink data
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name

2-356
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
LLCTranSAPI9
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
reselection.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-357
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI10
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the BSC supports the LLC frame transfer function for SAPI10 (Reserved) services. Generally, this function is
disabled for this type of data. The purpose of this function is to transfer
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-358
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI11
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
reselection.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-359
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI12
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
2-360
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI13
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
2-361
SJ-20130408140048-016|2013-07-17(R1.0)
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
LLCTranSAPI14
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
2-362
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name

2-363
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
LLCTranSAPI15
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-364
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.6.40 RIM support

Full Name
RIM support
Abbreviation
RIMSupport
Managed Object
BSS Function PS
3GPP Name
RIM
3GPP Reference
3GPP TS 44018
This parameter indicates whether the RIM function is enabled.
The RIM function refers to the quick reselection between BSCs or
between BSC and RNC. In BSC external Network Assisted Cell Change
(NACC), to accelerate the speed to access a new cell during cell
reselection for the MS, BSC sends the new cell system messages to the
MS when it is in source cell before the cell reselection. This reduces the
time for listening to complete system messages after the MS reselects
the new cell.
To obtain system messages of a cell out of the BSC, the external NACC
needs the RAN Information Management (RIM) process between SGSN
and BSC.
When an BSC supports the RIM function, service triggers BSC to obtain,
store and update the system messages of external cell through the RIM
process. Accordingly, when the RIM function is supported, the BSC
also needs to provide the system messages of its cells and notifies the
message changes to corresponding BSCs/RNCs, if requested by other
Description
BSCs/RNCs.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
New features, consistent with the original

Enable this switch when the external NACC function

is enabled. After the switch is enabled, an RIM process can be initiated

between the SGSN and the BSC to get the system information of a cell
outside the BSC. In this way, the MS can get access to the target
cell more quickly during a cell reselection.
2-365
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
ZGO-02-02-011 Inter-BSC NACC
Related Parameters
N/A
Relationship
The parameter RIMRetryTimes is valid only when

this switch is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.41 RIM retry times

Full Name
RIM retry times
Abbreviation
RIMRetryTimes
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS 43.055
This parameter indicates the number of RIM retries. The maximum num-
Description
ber of RIM retries is 3.
Instance
BSC
0..3
Unit
N/A
Default Value
Default Value
Configuration according to the range starting value

Set this parameter for external NACC when the
RIM function is enabled. It is recommended to disable the RIM function
because it requires the support of the CN.
Change Mode
Offline
Related features

2-366
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
Relationship
DTMSupport
This parameter can be set only when the RIM
function is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.42 TBF establish support

Full Name
TBF establish support
Abbreviation
TBF_EST
Managed Object
BSS Function PS
3GPP Name
TBF_EST
3GPP Reference
3GPP TS 43.055
This parameter determines whether BSC supports TBF establishment
process. TBF flow establishment refers to while releasing uplink TBF,
to determine if new uplink TBF shall be established immediately for
Description
CTRL_ACK field in Packet Control Acknowledgement message.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
Consider some MS do not support this function

When this function is enabled, the MS can find

whether data transmission is still needed from the last uplink block
in the released uplink TBF. If data transmission is needed, the MS
can immediately re-establish an uplink TBF. Enable or disable this
function according to the support capability of individual MSs.
2-367
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
DTMHandoverSupp
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.43 Signal extended uplink TBF support

Full Name
Signal extended uplink TBF support
Abbreviation
SIGNAL_EUTBF
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether the extended uplink TBF is supported
for a signalling TBF. This switch is valid when the switch of extended uplink TBF is enabled. The signaling TBF refers to a TBF established for
Description
transmitting GMM signalling.
Instance
BSC
0: Off
1: On
Unit
N/A
Default Value
Default Value
consider MS Capability and Radio Quality
2-368
SJ-20130408140048-016|2013-07-17(R1.0)
Set this parameter according to the need of

using the extended uplink TBF with the consideration of the actual
transmission status of signalling TBF data because the signalling

TBF process is generally completed in a short time. It is recommended
to enable this switch in a network that is sensitive for the test
of download rate performance.
Change Mode
Offline
Related features
ZGB-03-05-014 Delayed TBF Release in UL
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.44 Highest coding scheme of POC service in GPRS

Full Name
Highest coding scheme of POC service in GPRS
Abbreviation
pocAttSeltG
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the highest-order encoding mode that can be
Description
used for POC service by a GPRS-attached MS.
Instance
BSC
0: CS1(CS1)
1: CS2(CS2)
2: CS3(CS3)
3: CS4(CS4)
Unit
N/A
Default Value
2
2-369
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
For reliable signal data transferring and data speed

Set the highest order encoding mode according
to the radio quality in the network on the condition that the stability
of POS transmission is ensured.
Change Mode
Offline
Related features
N/A
Related Parameters
PocSupport
Relationship
This parameter is valid when the switch of

POS service support is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.45 Highest coding scheme of POC service in EGPRS

Full Name
Highest coding scheme of POC service in EGPRS
Abbreviation
pocAttSeltE
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the highest-order encoding mode that can be
Description
used for POC service by an EGPRS-attached MS.
Instance
BSC
2-370
SJ-20130408140048-016|2013-07-17(R1.0)
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
12: MCS9
Unit
N/A
Default Value
Default Value
For reliable signal data transferring and data speed

Set the highest order encoding mode according
to the radio quality in the network on the condition that the stability
of POS transmission is ensured.
Change Mode
Offline
Related features
N/A
Related Parameters
PocSupport
Relationship

Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.46 Highest coding scheme of signal TBF

Full Name
Highest coding scheme of signal TBF
Abbreviation
SigTBFMaxCode
Managed Object
BSS Function PS
2-371
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
None
3GPP Reference
N/A
This parameter limits the highest encoding mode of signallings in the case
of upper-layer signalling transmission, for example, the transmission of
Description
PDP activation and routing area update signallings.
Instance
BSC
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
10: MCS7
11: MCS8
12: MCS9
Unit
N/A
Default Value
Default Value
For reliable signal data transferring

The highest coding scheme of signalling TBF and the signalling data's
stable transmission over the air interface are subject to the network radio
quality. For the network that is relatively sensitive to the higher coding
scheme, it is recommedned to set the value as MCS7~MCS9 as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-372
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.47 Support of enhanced radio status procedures

Full Name
Support of enhanced radio status procedures
Abbreviation
EnRadioStu
Managed Object
BSS Function PS
3GPP Name
Enhanced Radio Status feature
3GPP Reference
N/A
On the basis of Radio Status, enhanced Radio Status reports three
more cause values:
x02: indicates the enhanced Radio Status process is used when the cell
reselection occurs. Usually, it helps satisfy the service requirement to
the maximum extent.
x03: indicates the enhanced Radio Status process is used when the
MS is required to perform cell reselection and LLC frame transfer is
not supported.
x04: indicates that SGSN is notified when BSC detects cell
reselection failure.
SGSN has the following responses:
When Radio Status with the cause value x02 is received, the
downlink LLC frame sending is resumed after cell reselection is
completed.
When Radio Status with the cause value x03 is received, either
the downlink data sending is resumed after cell reselection is completed,
or Radio Status with other cause values are received.
When Radio Status with the cause value x04 is received, if
there are data to be sent to MS, then the downlink LLC frame sending
is resumed.
With Radio Status that supports multiple cause values, SGSN
can better understand the status of MS, which avoids sending data
Description
to the old cell blindly.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
2-373
SJ-20130408140048-016|2013-07-17(R1.0)
When the negotiation of enhanced Radio Status

with the SGSN is enabled, downlink data can be suspended and
resumed
in time before and after a cell reselection, which improves the network
quality. It is recommended to enable the negotiation function at the
BSC side after this function is enabled at the SGSN side.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
This functional switch is valid only when the RadioStatus send switch in
GBMsgSndInd is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.48 Support of PFC flow control procedures

Full Name
Support of PFC flow control procedures
Abbreviation
PFCFlowCtrl
Managed Object
BSS Function PS
3GPP Name
PFC-FC
3GPP Reference
N/A
2-374
SJ-20130408140048-016|2013-07-17(R1.0)
PFC flow control occurs at Gb interface between SGSN and BSS, and
only in downlink. BSS provides control parameters and SGSN executes.
It helps avoid a PFC in BSS discarding some LLC data due to timeout
caused by grouping channels being too busy (too many LLC frame
buffers) and avoid discarding new downlink LLC data due to limited
memory resource (overflow of LLC frame buffer).
The BSSGP process at the BSS side periodically measures the current
leakage ratio of MS. When the statistic timer overflows, the 'PFC Flow
Control' process is initiated unconditionally.
Description
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Depends on the support of PFC between CN and BSS

To enable or disable the PFC flow control function,
adjust the status of this switch in consideration of the adjustment
at the CN side at the same time.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.49 PS handover support

Full Name
PS handover support
2-375
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
psHoSupport
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determine whether PS handover is supported.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
The function is not completed accomplished in the version and is
disabled.
This function is not completely accomplished in this version and thus
recommended to be disabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.50 Max of sending PS handover required

Full Name
Max of sending PS handover required
Abbreviation
psHoReqMaxNum
Managed Object
BSS Function PS
3GPP Name
N/A
2-376
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 48.018
This parameter represents the maximum number of sending the PS Handover Required message during PS handover. The message is sent again
Description
after expire of T12PsHo timer.
Instance
BSC
1..6
Unit
N/A
Default Value
Default Value

The default value is recommended. The parameters
relevant to PS handover, including this parameter, are not in commercial
use currently.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.51
handover
Full Name
handover
Abbreviation
enablePSHoIndi
2-377
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
3GPP TS 48.018
This parameter specifies whether PS Handover Indications is contained
Description
in the PS handover message.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
The default is enabled, which can reduce the PS handover time between
BSSs.
is required.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.52 Request SI/PSI

Full Name
Request SI/PSI
Abbreviation
enableRequestPSI
Managed Object
BSS Function PS
3GPP Name
N/A
2-378
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 48.018
This parameter determines whether the PS Handover message contains
Description
the request for BSC to respond for the SI/PSI information.
Instance
BSC
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
It is enabled by default, to reduce PS handover duration.
is required.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.53 Service UTRAN CCO support

Full Name
Service UTRAN CCO support
Abbreviation
PSUTRANCCOSupp
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
2-379
SJ-20130408140048-016|2013-07-17(R1.0)
It describes whether 2G/3G priority selection control is supported during

PS handover or reselection.
The SGSN can add the Service UTRAN CCO information in such
messages as PS Handover Request, Create BSS PFC, or DL UnitData
PDU to indicate for the BSC whether 3G is preferred, not preferred, or
Description
forbidden during PS handover and reselection.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This parameter is not in use currently. CCOStrategy
can also be used for 2G/3G priority control.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
CCOStrategy, equivalent to this parameter, can also be used for 2G/3G

priority control.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.54 FANR in TBF support

Full Name
FANR in TBF support
Abbreviation
TBFFanrSupport
Managed Object
BSS Function PS
3GPP Name
N/A
2-380
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates whether the BSC supports fast ACK/NACK reporting (FANR) function. If both the network and MS support this function,
the MS can add the DL radio block reception information in the UL radio
block, and the network can add the UL radio block reception information
in the DL radio block. In this way, the MS and network can be informed
timely of the reception of UL and DL radio blocks, thus quickening the
Description
re-transmission of UL and DL radio blocks that are not properly received.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
This function is newly added in the protocol and is not enabled by default.
Enable this function if the FANR function is required on site. Otherwise,
disable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.55 DLDC support

Full Name
DLDC support
Abbreviation
DLDCSupport
Managed Object
BSS Function PS
2-381
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the downlink dual-carrier function is
supported.
This is one of the EDGE evolution functions. If this function is enabled,
the GERAN carriers of two independent frequency points (or different
MAIO values in the case of frequency hopping) can be received by the
same terminal. This function is developed on the basis of multi-timeslot
technology, and the difference between them is that multi-timeslot
Description
allocation can span multiple carriers.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This function is not in commercial use in this
version. The default value is recommended.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.56 RTTI support

Full Name
RTTI support
2-382
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
RTTISupport
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the Reduced Transmission Time
Interval (RTTI) function is supported.
RTTI is a concept relative to BTTI. Basic Transmission Time Interval
(BTTI) means that four consecutive Bursts are used on a channel to
transmit a radio block, and it takes 20 ms to transmit a radio block. For
RTTI, two consecutive Bursts on two channels (PDCH-pair) respectively
Description
are used, and it takes only 10 ms to transmit a radio block.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-383
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.57 EGPRS2-A support

Full Name
EGPRS2-A support
Abbreviation
EGPRS2_ASupp
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether EGPRS2-A is supported.
EGPRS2-A is the phase-I implementation of EGPRS2. In this phase,
16QAM, 32QAM, and Turbo code are used, QPSK and 1.2-multiple
symbol rate are not used. Also, DAS and UAS modulation coding
Description
scheme are used.
Instance
BSC
0: Not Support
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
The parameter EGPRS2AInitAttSelt_0 is valid only when this switch

is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D.
Parameter Modifying
Detail
Update
2-384
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.58 EGPRS prior to GPRS Support

Full Name
EGPRS prior to GPRS Support
Abbreviation
EGPRSAllocPri
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether to support EGPRS prior to GPRS.
After this function is enabled, in case EGPRS and GPRS share channel,
the system adjusts the number of allocated blocks for EGPRS and
Description
GPRS according to the allocating weight of EGPRS.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value

If this switch is enabled, the number of blocks

allocated to EGPRS and GPRS services is adjusted according to the

weight of EGPRS when EGPRS and GPRS services share the same
channel.
Enable or disable this switch depending on the requirement on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
If this function is supported, the number of blocks allocated to EGPRS
Relationship
and GPRS services is adjusted according to the weight of EGPRS when

EGPRS and GPRS services share the same channel.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-385
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.6.59 Allocating weights of EGPRS

Full Name
Allocating weights of EGPRS
Abbreviation
EGPRSAllocW
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the allocating weights of EGPRS. When the
EGPRS prior to GPRS function is supported, the system adjusts the
number of blocks allocated to EGPRS and GPRS according to this
allocating weight.
If the value is 0, EGPRS service fails to get blocks. If the value is 100,
Description
GPRS service fails to get blocks.
Instance
BSC
0..100
Unit
N/A
Default Value
60
Default Value
consider speed of EDGE and GPRS in BSC

If a channel is shared by EDGE and GPRS users,
increasing the parameter value results in more radio blocks allocated
to EDGE users and higher rate. Similarly, decreasing the parameter
value results in less radio blocks allocated to EDGE users and lower
rate. This parameter is effective on both dynamic and static data
services.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
This parameter is only valid when Info_4_6
Relationship
is enabled. When Info_4_6 and Info1_7_5 are enabled at the same time,
Info1_7_6 takes effect prior to this parameter.
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-386
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.60 Choose PS route by NSVC

Full Name
Choose PS route by NSVC
Abbreviation
PSRouteByNSVC
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to choose PS route by NSVC. It is
meaningful only when multiple IPGB boards exist on site.
If BSC supports choosing route by NSVC, an IPGB board can send
NS-ALIVE message through itself and thus individually detects its NSVC
status. At the same time, the user plane selects the NSVC in normal
route status to provide service. If BSC does not support choosing route
through NSVC, the IPGB board sends the NS-ALIVE message through
another board and thus does not individually detect the route status of
Description
NSVC.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value

Enable this function when the following conditions
are met: load sharing is adopted at Gb interface; the BSC is configured
with multiple IPGB boards, each connecting to a router or switch;

and the SGSN has only one remote destination IP address.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-387
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.61 Enable PS Uplink Power Control In Establishment Phase

Full Name
Enable PS Uplink Power Control In Establishment Phase
Abbreviation
PSUlPwrCtlInEsta
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the BSS writes the uplink power control
information in the IMMEDIATE ASSIGNMENT message after receiving a
Description
CHANNEL ACCESS REQUEST message from the MS.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
consider effect to TBF uplink establishment

Set the parameter value to 1 if the power control
is needed for all uplink data blocks during the TBF process when uplink
power control is required on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-388
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
This parameter is valid when the value of UlPwCtrl

is 1.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.62 DTM Enhance Capability

Full Name
DTM Enhance Capability
Abbreviation
DTMEnhanceCapa
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter determines whether the BSC supports enhanced DTM
functions. If yes, the MS establishes the DTM service without releasing
Description
the current PS service.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
These functions are not provided in the current
version.


according to the DTM settings and the functions supported by the current
version.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-389
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
This parameter is valid after the switch of

enhanced DTM functions for the cell is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.63 Enable PCU resource alarm

Full Name
Enable PCU resource alarm
Abbreviation
PcuResAlarmEnable
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable the UPPB resource alarm
function. The availability of UPPB board resources can be measured
through the availability of each DSP resource on UPPB board. The measured indexes include failure ratio for allocating memory, use ratio for
MAC instance, use ratio for BSSGP instance, use ratio of mac-tlli index,
use ratio for bssgp-tlli index, use ratio for radio channel instance, and use
Description
ratio for TS instance.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
monitor use ratio of TS instance in time

Set the parameter value to 0 when the UPPB
resource alerting function is not needed. Set the parameter value
to 1 when the UPPB resource alerting function is needed.
2-390
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.64 E-UTRAN CCN support

Full Name
E-UTRAN CCN support
Abbreviation
EUtranCCN
Managed Object
BSS Function PS
3GPP Name
E-UTRAN_CCN_ACTIVE
3GPP Reference
3GPP TS 44.018
This parameter determines whether to enable the CCN function between
Description
a GSM cell and an adjacent LTE cell.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
This function is not implemented in the current
version. Hence, it is recommended that this function be disabled.
Change Mode
Offline
Related features
N/A
2-391
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.65 DTM Handover Support

Full Name
DTM Handover Support
Abbreviation
DTMHandoverSupp
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
3GPP TS 43.055
This parameter specifies whether DTM handover is supported. When
this function is enabled, the BSC can provide simultaneous CS and
PS handover for DTM subscribers, improving the service continuity for
DTM mode.
Description
This function can only be used when the DTM function is enabled.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode

Enable this function based on the on-site requirement and whether DTM
function is enabled. This function can improve the service continuity
during handover.
Offline
2-392
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
DTMSupport
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.66 Continue with CS HO While PS HO is failure in DTM HO

Full Name
Continue with CS HO While PS HO is failure in DTM HO
Abbreviation
DTMHoCsHoCtrl
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
3GPP TS 43.055
This parameter indicates whether to continue CS handover when PS han-
Description
dover fails during DTM handover, when DTM handover is enabled.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Enable this function based on the on-site requirement, whether DTM
function is enabled, and whether DTM switchover function is enabled.
This function enables CS handover to proceed even if PS handover fails.
Change Mode
Offline
Related features
N/A
Related Parameters
DTMHandoverSupp
2-393
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.67 Send suspend message when GPRS suspension

Full Name
Send suspend message when GPRS suspension
Abbreviation
ResumeSetOpt
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
Default value of resumesetopt is 0, that means: when PS service is
suspended, the suspend message isnt sent in Gb interface, the voice
channel release message informs MS that its resumed and doesnt
need to send RA update process resume.
When resumesetopt is 1, that means: when PS service is suspended,
the suspend message is sent in Gb interface, the voice channel release
message informs MS that it isnt resumed and needs to send RA update
process resume.
If resumesetopt is 0and resumemax isnt 3, that means: when PS
service is suspended, the suspend message isnt sent in Gb interface,
the voice channel release message informs MS that its resumed and
doesnt need to send RA update process resume, a resume message is
Description
sent in Gb after the voice channel is released. Its used for test.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
2-394
SJ-20130408140048-016|2013-07-17(R1.0)
when PS service is suspended, the suspend message isnt sent in

Default Value
Gb interface, the voice channel release message informs MS that its
resumed and doesnt need to send RA update process resume, for

reduce the number of RA update.
If need to inform the SGSN that the PS service is suspended, set
ResumeSetOpt 1, the number of RA update increases.
If need to inform the SGSN that the PS service is resumed by a resume

message for test, set ResumeSetOpt 0, and dont set resumemax 3.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.68 Send by SNDCP indicator

Full Name
Send by SNDCP indicator
Abbreviation
SNDCPSendInd
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to rank the LLC frames by SNDCP num-
Description
ber for transmission.
Instance
BSC
0: No
1: Yes
Unit
N/A
2-395
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
The functional Switch, default: disabled
Enable this function if sorting by SNDCP is required on site. Otherwise,
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.69 TCP/IP performance enhance

Full Name
TCP/IP performance enhance
Abbreviation
TCPIPEnhance
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to analyze application layer data and
Description
desert LLC frames received by the MS.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The functional switch, default: close

2-396
SJ-20130408140048-016|2013-07-17(R1.0)
Enable this function if the TCP/IP optimization enhancement function is
required on site. Otherwise, disable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.70 IP Segment Optimization

Full Name
IP Segment Optimization
Abbreviation
IPSegOpt
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether IP segment optimization is enabled.
The function is described as follows:
During the segmentation of LLC at the air interface, if the NU is
Description
discontinuous, the current LLC will be transmitted with a 20-ms delay.
Instance
BSC
1: Support
Unit
N/A
Default Value
Default Value
Protocol require MS to reorder LLCs received, BSC send LLC in the
sequence when received at Gb Interface.
0: Not Support
2-397
SJ-20130408140048-016|2013-07-17(R1.0)

If some MS do not implement as protocol required, switch on the function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.71 Support resource optimizing by service

Full Name
Support resource optimizing by service
Abbreviation
SuppResOpByService
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable the function of resource
Description
control based on the classification of subscriber services.
Instance
BSC
1: Support
Unit
N/A
Default Value
Default Value
is disabled by default.
0: Not Support

Enable this switch as required.
Change Mode
Offline
2-398
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.6.72 Identify of special service

Full Name
Identify of special service
Abbreviation
SpecServiceIdentify
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines which solution (DSCP or BSSGP) is used to
Description
identify the specific service.
Instance
BSC
0: DSCP
1: BSSGP extend
Unit
N/A
Default Value
Default Value
By default, the DSCP solution is used.
This parameter requires negotiation with the
core network and then determines the solution used for identification.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-399
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.6.73 Extended uplink dynamic allocation support

Full Name
Extended uplink dynamic allocation support
Abbreviation
ExUpDynSupport
Managed Object
BSS Function PS
3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
3GPP Reference
N/A
This parameter indicates if cell supports extended uplink dynamic allocation. While using this function, the MS only need listen USF allocation
with the least timeslot, so you can determine to send uplink block on all
Description
allocated uplink timeslot.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Consider Radio Resource Utilization and PS tarffic Model

When the MS supports this function and the
uplink PS service transmission is a priority or there are sufficient
uplink radio resources, enabling the function can increase the uplink
transmission rate.
Change Mode
Offline
Related features
ZGO-03-02-007 Extended Dynamic Allocation
2-400
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
Relationship
N/A
This parameter is valid when the cell-level
ExUpDynSupport parameter is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.74 Resource pool for PS rate

Full Name
Resource pool for PS rate
Abbreviation
PSAbisThs
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the upper limit of Abis resource proportion
in the Full Dynamic Abis Resource Pool that can be assigned to PS
services. If the limit is exceeded, the remaining idle Abis resources
cannot be assigned to PS services.
The proportion of Abis resources used for PS services = number of Abis
resources Assigned to PS services / total Abis resources available
Description
in the resource pool
Instance
BSC
0..100
Unit
Default Value
80
Default Value
Setting this parameter to "80" allows Abis resources to be allocated

evenly to PS and CS services. In this case, CS services are given a
certain degree of priority.
2-401
SJ-20130408140048-016|2013-07-17(R1.0)
If the PS traffic in the cell is high, you

can set a higher value not more than 90. If the PS traffic is low
and there is a shortage of Abis resources, you can lower the value
appropriately to ensure CS services first.
Change Mode
Offline
Related features
ZGO-03-03-001 Full Dynamic Abis Allocation
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.75 Max users of POC service on shared PS channel uplink

Full Name
Max users of POC service on shared PS channel uplink
Abbreviation
psCapaThsUl
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the upper limit of PoC service subscribers in
shared uplink channel.
If dedicated PoC channel is configured, it indicates the upper limit of PoC
subscribers on the uplink of each dedicated PoC channel. If it exceeds
this number, PoC subscriber access is not allowed on the uplink of this
Description
dedicated PoC channel.
Instance
BSC
2..6
Unit
N/A
Default Value
2-402
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
For reliable signal data transfer speed

Set the maximum number of users sharing the
POC dedicated channel on the condition that the rate of POC
transmission
is ensured according to the POC service feature in the network.
Change Mode
Offline
Related features
N/A
Related Parameters
PocSupport
Relationship

Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.76 Max users of POC service on shared PS channel downlink

Full Name
Max users of POC service on shared PS channel downlink
Abbreviation
psCapaThsDl
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the upper limit of PoC service subscribers in
shared downlink channel.
If dedicated PoC channel is configured, it indicates the upper limit of
PoC subscribers on the downlink of each dedicated PoC channel. If
it exceeds this number, PoC subscriber access is not allowed on the
Description
downlink of this dedicated PoC channel.
Instance
BSC
2..6
2-403
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
For reliable signal data transfer speed

Set the maximum number of users sharing the
POC dedicated channel on the condition that the rate of POC
transmission
is ensured according to the POC service feature in the network.
Change Mode
Offline
Related features
N/A
Related Parameters
PocSupport
Relationship

Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.77 Optimized POC service support

Full Name
Optimized POC service support
Abbreviation
POCSupport
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter indicates if PoC subscriber applies for dedicated POC
channel. PoC indicates Push to talk over Cellular. Consider the MS with
proper function as walkie-talkie. This kind of MS has a talkie key. After
Description
pressing this key, you can talk with other subscribers or in a group.
Instance
BSC
2-404
SJ-20130408140048-016|2013-07-17(R1.0)
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Depends on the POC sevice requirement at BSS network

Set this parameter based on the requirement
for POC service in the network. If special processing is needed for
POS service, set the other functions relevant to POS service.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.78 IP abis pool bandwidth restore support

Full Name
IP abis pool bandwidth restore support
Abbreviation
bwRestore
Managed Object
BSS Function PS
3GPP Name
No
3GPP Reference
N/A
This parameter indicates whether to support the compression and restora-
Description
tion of the user plane codec mode according to bandwidth usage.
Instance
BSC
2-405
SJ-20130408140048-016|2013-07-17(R1.0)
0: Disable
1: Enable
2: User Transplant Control
3: User Priority Control
Unit
N/A
Default Value
Default Value
The value is dependent upon the on-site bandwidth configuration and
user's bandwidth.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.79 Max LLC num that per bssgp may save

Full Name
Max LLC num that per bssgp may save
Abbreviation
buffMaxLLCFrameNum
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum number of Logic Link Control
(LLC) frames bufferred in a BSSGP instance. In packet-switched service,
the parameter is used to prevent an instance from occupying extra User
Description
Blocks (UBs).
2-406
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
10..255
Unit
N/A
Default Value
254
Default Value
The parameter is set in accordance with UB of the user plane processing
board and delivery of LLC frames on the Gb interface.
The parameter is set in accordance with UBs of the user plane
processing board and delivery of LLC frames on the Gb interface.
Change Mode
Offline
Related features
N/A
Related Parameters
LLCTranSAPI0
LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D.
Parameter Modifying
Detail
Update
2-407
SJ-20130408140048-016|2013-07-17(R1.0)
2.6.80 Max LLC num that per bssgp may transfer

Full Name
Max LLC num that per bssgp may transfer
Abbreviation
tranMaxLLCFrameNum
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
When an MS reselects a cell in packet-switched service, the LLC frames
of the original cell transfer to the new cell. This parameter indicates the
maximum number of transferred LLC frames in a BSSGP instance. If the
transferred LLC frames exceeds the number, the remaining frames will
Description
be discarded.
Instance
BSC
0..255
Unit
N/A
Default Value
120
Default Value
The parameter is set in accordance with network port flow of the user
plane processing board and LLC frame flow of the Gb interface.
The parameter is set in accordance with network port flow of the user
plane processing board and LLC frame flow of the Gb interface.
Change Mode
Offline
Related features
N/A
Related Parameters
LLCTranSAPI0
LLCTranSAPI1
LLCTranSAPI2
LLCTranSAPI3
LLCTranSAPI4
LLCTranSAPI5
LLCTranSAPI6
LLCTranSAPI7
LLCTranSAPI8
LLCTranSAPI9
LLCTranSAPI10
LLCTranSAPI11
LLCTranSAPI12
LLCTranSAPI13
LLCTranSAPI14
LLCTranSAPI15
Relationship
The parameter is valid when the associated parameter are set to On.
2-408
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D.
Parameter Modifying
Detail
Update
2.6.81 RRM threshold

Full Name
RRM threshold
Abbreviation
RRMThreshold
Managed Object
BSS Function PS
3GPP Name
N/A
3GPP Reference
N/A
Description
Ratio of Abis resources that need dynamic management
Instance
BSC
0..100
Unit
Default Value
50
Default Value
It is recommended that 50% resources are controlled by Radio Resource

Management (RRM) and the other resources are used in a preemption
manner.

More sufficient resources allow a lower RRM threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
The parameter is valid when the AbisRSDynMng function is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-409
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.82 Parameter of Flow control mode 1

Full Name
Parameter of Flow control mode 1
Abbreviation
FlowCtlMode1Para
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
In flow control mode 1, BSC reports a flow control parameter in accordance with an actual flow of radio ports. The actual statistical flow is
lower due to radio port retransmission and TBF failure. Therefore, the
actual flow control parameter reported by BSC is the value of actual sta-
Description
tistical flow multiplied by a value determined by this parameter.
Instance
BSC
1..100
Unit
N/A
Default Value
Default Value
The parameter is set in accordance with actual network requirements.

The parameter is determined by core network flow control. If the default
setting affects downlink data transmission, the parameter should be
adjusted to a greater value if transmission is intermittent, or be adjusted

to a lower value if transmission is too fast.
Change Mode
Offline
Related features
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Relationship
The parameter is valid when the flow control function is enabled.
Related Interfaces
Gb
2-410
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.83 Parameter of Flow control mode 2

Full Name
Parameter of Flow control mode 2
Abbreviation
FlowCtlMode2Para
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
In flow control mode 2, BSC reports a flow control value in accordance
with the maximum flow of a cell. The maximum flow is determined by the
configured channel quantity (channel quantity max. flow per channel).
This parameter is used to set the maximum flow of a channel, and the unit
Description
is 100 bps.
Instance
BSC
10..1000
Unit
N/A
Default Value
700
Default Value
The parameter is set in accordance with the maximum theoretical rate of
a single channel in GPRS.

adjusted to a greater value if transmission is intermittent, or be adjusted

to a lower value if transmission is too fast.
Change Mode
Offline
Related features
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
2-411
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.6.84 Coefficient of Bvc bucket size

Full Name
Coefficient of Bvc bucket size
Abbreviation
BvcBucketPara
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter determines the leaky bucket size of a BSSGP Virtual
Connection (BVC). The leaky bucket size varies with the parameter
value to meet a calibration for flow control deviation.
Description
The parameter is available in V6.20.21 or later.
Instance
BSC
10..20000
Unit
N/A
Default Value
1200
Default Value
The parameter is set in accordance with the default flow control period.


adjusted in accordance with core network requirements. If the bucket is
big, the parameter should be adjusted to a lower value. If the bucket is
small, the parameter should be adjusted to a higher value.
Change Mode
Offline
Related features
N/A
2-412
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.6.85 Coefficient of MS bucket

Full Name
Coefficient of MS bucket
Abbreviation
MSBucketPara
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
N/A
This parameter determines the actual leaky bucket size of a Mobile
Station (MS). The leaky bucket size varies with the parameter value to
meet a calibration for flow control deviation.
Description
The parameter is available in V6.20.21 or later.
Instance
BSC
10..20000
Unit
N/A
Default Value
200
Default Value
The parameter is set in accordance with the default flow control period.


adjusted in accordance with core network requirements. If the bucket is
big, the parameter should be adjusted to a lower value. If the bucket is
small, the parameter should be adjusted to a higher value.
2-413
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
BVCFlowCtrl
MSFlowCtrl
PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.6.86 Enable implicit reject with paging

Full Name
Enable implicit reject with paging
Abbreviation
SuppPagImpltRej
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
This parameter determines whether an implicit access rejection field is
carried in a paging message. The terminal supporting the implicit rejection function determines whether to initiate an implicit rejection flow when
Description
initiating an access request.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Attribute function. The function is disabled by default.
2-414
SJ-20130408140048-016|2013-07-17(R1.0)
If the function needs to be enabled, the parameter value is set to 1. If
the function needs to be disabled, the parameter value is set to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.87 Implicit reject CS and PS with paging

Full Name
Implicit reject CS and PS with paging
Abbreviation
PagImpltRejCsPs
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
This parameter indicates a field of implicit rejection carried in a paging
message. The field means implicitly rejecting an access to a terminal
Description
with low access priority.
Instance
BSC
0:not implicit reject CS and PS
1:implicit reject PS
2:implicit reject CS
3:implicit reject CS and PS
Unit
N/A
Default Value
Default Value
This parameter is set in according with service importance and
lower-priority service rejection in service congestion.
2-415
SJ-20130408140048-016|2013-07-17(R1.0)
The parameter is set in accordance with an actual requirement for
implicitly rejecting an access to low-priority CS and PS service.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.88 PS service Bar when Gb break

Full Name
PS service Bar when Gb break
Abbreviation
CellPSBarGbDown
Managed Object
BSS Function PS
3GPP Name
None
3GPP Reference
3GPP TS48.018
This parameter determines whether the affected cell notifies the related
MS of PS inaccessiable when the Gb interface is broken. The parameter
Description
is used to avoid an impact of invalid PS service requests on the system.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The function is disabled if enabling the function is not required on site.

The function is enabled in accordance with an onsite requirement.

2-416
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.6.89 CBL in Bvc/MS flow control

Full Name
CBL in Bvc/MS flow control
Abbreviation
FlowCtrlCBLSupp
Managed Object
GBssFunctionPS
3GPP Name
GBL
3GPP Reference
N/A
This parameter indicates whether to report the Current Bucket Level (CBL)
Description
in a BVC/MC flow control message.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
The default value is configured depending on the CN. If the CN supports

CBL reporting, the current CBL is reported to an SGSN through a flow
control message.
This parameter is configured depending on whether the CN flow control
supports this function.
Change Mode
Offline
Related features
N/A
2-417
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
BVCFlowCtrl
MSFlowCtr
PFCFlowCtr
Relationship
This parameter is effective when the flow control is enabled.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->BSS Function PS
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7 Common Measure and Information Exchange

(GCommMeas)
2.7.1 Common Measure and Information Exchange ID
Full Name
Common Measure and Information Exchange ID
Abbreviation
GCommMeas
Managed Object
Common Measure and Information Exchange
3GPP Name
N/A
3GPP Reference
N/A
Description
Common Measure and Information Exchange ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
2-418
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Information Configuration->Common Measure and Information

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.2 Report characteristics

Full Name
Report characteristics
Abbreviation
ReportType
Managed Object
3GPP Name
Report characteristics
3GPP Reference
3GPP 25.423
This parameter indicates the report method of measurement reports,
including:
1 On Demand
2 Periodic
Description
7 Event E
Instance
BSC
1: On Demand
2: Period
7: Event E
Unit
N/A
Default Value
Default Value
general value
2-419
SJ-20130408140048-016|2013-07-17(R1.0)
To uninterruptedly reflect the load on the

peer end by using the common measurement reporting mode of the Iur-g
interface, select "2" (Periodic). To report measurement reports when
certain conditions are met, select "7" (Event E). To report measurement
reports once, select "1" (On Demand).
Change Mode
Offline
Related features
N/A
Related Parameters
IurgOf2gReq
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.3 Measurement Load Threshold 1

Full Name
Measurement Load Threshold 1
Abbreviation
measThrLoad1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 1 for reporting Load with the Event
E method. The load is reported when the Load value exceeds this thresh-
Description
old.
Instance
BSC
0..100
Unit
Default Value
50
2-420
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
general value
Set this value to a lower value if measurement reporting is expected to
be sensitive. Otherwise, set a higher value.
Change Mode
Offline
Related features
N/A
Related Parameters
IurgOf2gReqReportType
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.4 Measurement RT Load Threshold 1

Full Name
Measurement RT Load Threshold 1
Abbreviation
measThrRtLoad1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 1 for reporting RT Load with the
Event E method. The load is reported when the RT Load value exceeds
Description
this threshold.
Instance
BSC
0..100
Unit
Default Value
50
Default Value
general value
2-421
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.5 Measurement NRT Load Threshold 1

Full Name
Measurement NRT Load Threshold 1
Abbreviation
measThrNrtLoad1
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 1 for reporting NRT Load with the
Event E method. The load is reported when the NRT Load value exceeds
Description
this threshold.
Instance
BSC
0..3
Unit
N/A
Default Value
Default Value
general value

2-422
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.6 Measurement Load Threshold 2

Full Name
Measurement Load Threshold 2
Abbreviation
measThrLoad2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 2 for reporting Load with the Event
E method. The load is reported when the Load value drops below this
Description
threshold.
Instance
BSC
0..100
Unit
Default Value
40
Default Value
general value
Change Mode
Offline
Related features
N/A
2-423
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.7 Measurement RT Load Threshold 2

Full Name
Measurement RT Load Threshold 2
Abbreviation
measThrRtLoad2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 2 for reporting RT Load with the
Event E method. The load is reported when the RT Load value drops
Description
below this threshold.
Instance
BSC
0..100
Unit
Default Value
40
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
N/A
2-424
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.8 Measurement NRT Load Threshold 2

Full Name
Measurement NRT Load Threshold 2
Abbreviation
measThrNrtLoad2
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter specifies the threshold 2 for reporting NRT Load with the
Event E method. The load is reported when the NRT Load value drops
Description
below this threshold.
Instance
BSC
0..3
Unit
N/A
Default Value
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-425
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.9 Report periodicity unit

Full Name
Report periodicity unit
Abbreviation
RepPeriodUnit
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter indicates the unit of load report period when common
measurement is periodical.
1: 10 ms
Description
2: 1 Min
Instance
BSC
1: 10 ms(10 ms)
2: 1 Min(1 Min)
Unit
N/A
Default Value
Default Value
In the case of periodic reporting, the unit
is second.
Generally, the period is short for periodic

reporting, which helps reflect the load on the peer end in real time.
When the requirements on the real-time load on the peer end are
relatively
low, the unit can be changed to minute.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
2-426
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.10 Report Periodicity Value

Full Name
Report Periodicity Value
Abbreviation
RepPeriodValue
Managed Object
3GPP Name
Report Periodicity Value
3GPP Reference
3GPP 25.423
This parameter indicates the load report period when common
measurement is periodical.
If RepPeriodUnit is 1, the step is 10ms, the value range is 1-6000.
Description
If RepPeriodUnit is 2, the step is 1Min, the value range is 1-60.
Instance
BSC
{RepPeriodUnit==1}[1..6000]
{RepPeriodUnit==2}[1..60]
Unit
N/A
{RepPeriodUnit==1}100,
Default Value
{RepPeriodUnit==2}1
Default Value
Generally, measurement reports are reported every one second.

To use second or a unit lower than second as
the reporting period, configure "RepPeriodUnit" to "1". In this case,
the value of this parameter ranges from 1 to 6000 (10 ms to 60s).
To use minute as the reporting period, configure "RepPeriodUnit" to

"2". In this case, the value of this parameter ranges from 1 to 60
(1 minute to 60 minutes).
2-427
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
RepPeriodUnit
When "RepPeriodUnit" is configured to "1",
the step is 10ms and the value ranges from 1 to 6000. When
Relationship
"RepPeriodUnit"
is configured to "2", the step is 1 minute and the value ranges from
1 to 60.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.11 Measurement Hysteresis Time

Full Name
Measurement Hysteresis Time
Abbreviation
MeasHys
Managed Object
3GPP Name
Measurement Hysteresis Time
3GPP Reference
3GPP 25.423
This parameter determines the delay time of reporting based on event
E. The system reports or stops reporting measurement reports after this
Description
delay time when the corresponding conditions are met.
Instance
BSC
1..6000
Unit
N/A
Default Value
100
Default Value
Generally, configure this parameter to 1s.
2-428
SJ-20130408140048-016|2013-07-17(R1.0)

To hope that the delay time of reporting based

on event E is short, decrease this value. Otherwise, increase this
value.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.12 Event Report Periodicity

Full Name
Event Report Periodicity
Abbreviation
EveRepPeriod
Managed Object
3GPP Name
Report Periodicity
3GPP Reference
3GPP 25.423
This parameter determines the period of reporting based on event E when
Description
the event reporting conditions are met.
Instance
BSC
1..6000
Unit
N/A
Default Value
100
Default Value
Generally, measurement reports are reported every one second.
as required.
2-429
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.13 Information Report Type

Full Name
Information Report Type
Abbreviation
InfoReportType
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter determines the information reporting mode. 1: reported
Description
immediately; 3: reported after being modified
Instance
BSC
1: On demand
3: Periodic
Unit
N/A
Default Value
Default Value
Change Mode
general value
To hope that the information such as load on
the peer end is reported after being modified, configure this parameter
to 3.
Offline
2-430
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
IurgOf2gReq
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.14 Measurement type

Full Name
Measurement type
Abbreviation
MeasType
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP 25.423
This parameter indicates the common measurement type.
2: Load
6: RT Load
Description
7: NRT Load
Instance
BSC
2: Load
6: RT Load
7: NRT Load
Unit
N/A
Default Value
Default Value
This interface is designed for China Mobile only. Therefore, configure
this parameter according to the requirements of China Mobile.
According to the requirements of China Mobile,
this parameter is not modified.
2-431
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
IurgOf2gReq
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.15 Support of 2g request Iur-g

Full Name
Support of 2g request Iur-g
Abbreviation
IurgOf2gReq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a functional switch that determines whether the BSC
can obtain the information of Iur-g capacity and load from the RNC. The
original Iur-g functional switch still takes effect. It controls whether the
RNC obtains the capacity and load information from the BSC.
The value 0 indicates that the BSC does not obtain data from the RNC.
Description
The value 1 indicates that the BSC obtains data from the RNC.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
2-432
SJ-20130408140048-016|2013-07-17(R1.0)
To enable the Iur-g interface to acquire the
information of 3G load, enable this switch.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.7.16 Not Real Time Load Overflow Threshold

Full Name
Not Real Time Load Overflow Threshold
Abbreviation
nrtOverflowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the overload threshold of non-real-time services.
When the load of non-real-time services is equal to or higher than the
threshold, it is considered that the cell is overloaded with non-real-time
services. Non-real-time services refer to PS services. The load is calculated by dividing the number of occupied PDCHs (including dynamic
Description
PDCHs and static PDCHs) by the number of available PDCHs.
Instance
BSC
1..99
Unit
Default Value
90
2-433
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Generally, it is regarded that the cell is overloaded if more than 90%
of radio resources are occupied.

The higher the value is, the more likely the cell will be to be selected by
the RNC as the target cell for re-direction.
NRTThs_0>NRTThs_1>NRTThs_2
Change Mode
Offline
Related features
N/A
Related Parameters
IurgSupport
Relationship
This parameter becomes valid when IurgSupport

is set to Yes.
Related Interfaces
Iur-g interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.17 Not Real Time Load High Threshold

Full Name
Not Real Time Load High Threshold
Abbreviation
nrtHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the upper overload threshold of non-real-time
services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_0, it is regarded that the
cell is overloaded with non-real-time services. Non-real-time services
refer to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
Description
available PDCHs.
2-434
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
1..99
Unit
Default Value
60
Default Value
Generally, it is regarded that the cell is overloaded if more than 60%
of radio resources are occupied.

Change Mode
Offline
Related features
N/A
Related Parameters
IurgSupport
Relationship

is set to Yes.
Related Interfaces
Iur-g interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.7.18 Not Real Time Load Low Threshold

Full Name
Not Real Time Load Low Threshold
Abbreviation
nrtLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-435
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the lower overload threshold of non-real-time

services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_1, it is regarded that the cell
is moderately loaded with non-real-time services. Otherwise, the load
of non-real-time services is regarded low. Non-real-time services refer
to PS services.
The load is calculated by dividing the number of occupied PDCHs
(including dynamic PDCHs and static PDCHs) by the number of
Description
available PDCHs.
Instance
BSC
1..99
Unit
Default Value
20
Default Value
Generally, it is regarded that the cell load is low if less than 20% of radio
resources are occupied.

Change Mode
Offline
Related features
N/A
Related Parameters
IurgSupport
Relationship

is set to Yes.
Related Interfaces
Iur-g interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Exchange
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-436
SJ-20130408140048-016|2013-07-17(R1.0)
2.8 BSC Precise Paging Configuration

(GBssPrecisePaging)
2.8.1 BSC Precise Paging Configuration ID
Full Name
BSC Precise Paging Configuration ID
Abbreviation
GBssPrecisePaging
Managed Object
BSC Precise Paging Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC Precise Paging Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->BSC Precise Paging Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-437
SJ-20130408140048-016|2013-07-17(R1.0)
2.8.2 Support Precise Paging

Full Name
Support Precise Paging
Abbreviation
precisePagSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the switch of BSC exact paging. This function
indicates that the system performs paging in the cells for exact paging. If
the system does not reach any subscriber, it performs paging within the
range required by the core network. The exact paging cells include the
Visit Paging Cell (VPC) and Home Paging Cell (HPC). The VPC indicates
a cell around the cell where the last service exists. It can be a handover
or reselection adjacent cell, or can be configured additionally. The HPC
indicates a group of cells calculated based on the cells where latest ser-
Description
vices are triggered.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
This parameter is a functional switch, which disabled by default.

Generally, configure this parameter according
to operator requirements. In the case of large paging volume, enable
the exact paging function to save CCCH channels.
Change Mode
Offline
Related features
ZGO-02-01-002 Precise Paging
Related Parameters
CsPrecisePaging
PsPrecisePaging
Relationship
The precise paging (foreground) is used only when the BSC-level and
cell-level switches are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-438
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.8.3 Use HPC for Precise Paging

Full Name
Use HPC for Precise Paging
Abbreviation
precisepagUseHpc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If this parameter is set to "No", only the VPC is used for exact paging. If
this parameter is set to "Yes", both the VPC and HPC are used for exact
Description
paging.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the selection function is disabled.
For the fixed cells such as housing and residential
areas, the HPC can be used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
2-439
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service

Full Name
Adopt Precise Paging for repaging of Circuit Switched Service
Abbreviation
csRepagPrecise
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the first paging is not responded for the CS service, the core network may initiate paging for another time. This parameter determines
whether the exact paging policy is applied for subsequent paging opera-
Description
tions of the CS service in the core network.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The paging time must not be excessively long.

according to operator requirements. When subscribers can accept a
relatively long connection time, enable this switch.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710d
2-440
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service

Full Name
Adopt Precise Paging for repaging of Packet Switched Service
Abbreviation
psRepagPrecise
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the first paging is not responded for the PS service, the core network may initiate paging for another time. This parameter determines
whether the exact paging policy is applied for subsequent paging opera-
Description
tions of the PS service in the core network.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The paging time must not be excessively long.

according to operator requirements. When PS paging is mainly for non
real-time services or subscribers can accept a relatively long connection

time, enable this switch.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-441
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710d
Parameter Modifying
Detail
New
2.8.6 Allow Exceed area Precise Paging for Circuit Switched

Service
Full Name
Allow Exceed area Precise Paging for Circuit Switched Service
Abbreviation
csOutAreaPag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the exact paging of CS service covers
the cells out of the paging range of core network. The paging of CS service
is usually applied for location cells. However, some VPCs and HPCs may
Description
not in these location cells.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Usually, subscribers are not out of the paging range of core network.
Usually, this function is disabled. When the
location cell is updated and the BSC fails to acquire IMSI to record
the subscriber location, this function can be enabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-442
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.8.7 Allow Exceed area Precise Paging for Packet Switched

Service
Full Name
Allow Exceed area Precise Paging for Packet Switched Service
Abbreviation
psOutAreaPag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the exact paging of PS service covers
the cells out of the paging range of core network. The paging of PS service
is usually applied for routing cells. However, some VPCs and HPCs may
Description
not in these routing cells.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Usually, subscribers are not out of the paging range of core network.
Usually, this function is disabled. When the
routing cell is updated and the BSC fails to acquire IMSI to record
the subscriber location, this function can be enabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-443
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.8.8 Paging Repeat Time for Circuit Switched Service

Full Name
Paging Repeat Time for Circuit Switched Service
Abbreviation
csPagingRepeatTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the maximum retry times of CS service
paging (exact paging excluded).
When the first paging is not responded, the system can initiate multiple
Description
paging operations according to the value of this parameter.
Instance
BSC
0..2
Unit
N/A
Default Value
Default Value
Usually, multiple paging operations are applied on the BSC only when
this function is not applied in the core network.
Multiple paging operations are applied on the
BSC only when this function is not applied in the core network.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-444
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.8.9 Paging Repeat Time for Packet Switched Service

Full Name
Paging Repeat Time for Packet Switched Service
Abbreviation
psPagingRepeatTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the maximum retry times of PS service
paging (exact paging excluded).
When the first paging is not responded, the system can initiate multiple
Description
paging operations according to the value of this parameter.
Instance
BSC
0..2
Unit
N/A
Default Value
Default Value
Usually, multiple paging operations are applied on the BSC only when
this function is not applied in the core network.
Multiple paging operations are applied on the
BSC only when this function is not applied in the core network.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

2-445
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.9 BSC Reserved Configuration (GBssFunctionRsv)

2.9.1 BSC Reserved Configuration ID
Full Name
BSC Reserved Configuration ID
Abbreviation
GBssFunctionRsv
Managed Object
BSC Reserved Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC Reserved Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->BSC Reserved Configuration
Parameter Modifying
Version
N/A
2-446
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.9.2 Global Reserved Parameter 1

Full Name
Global Reserved Parameter 1
Abbreviation
reserved1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-447
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
reserved2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved3
Managed Object

2-448
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
2-449
SJ-20130408140048-016|2013-07-17(R1.0)
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
0..255
Unit
N/A
Default Value
2-450
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
2-451
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-452
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved8
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-453
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved9
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-454
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved10
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-455
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
reserved11
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved12
Managed Object

2-456
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved13
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
2-457
SJ-20130408140048-016|2013-07-17(R1.0)
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved14
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
2-458
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved15
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
2-459
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved16
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-460
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved17
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-461
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved18
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-462
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved19
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-463
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
reserved20
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
BSC
N/A
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-464
SJ-20130408140048-016|2013-07-17(R1.0)
2.10 External GSM Cell Configuration

(GExternalGsmCell)
2.10.1 External GSM Cell ID
Full Name
External GSM Cell ID
Abbreviation
GExternalGsmCell
Managed Object
External GSM Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External GSM Cell ID
Instance
None
1..65535
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->External

Resource Configuration->External GSM Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-465
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.2 Cell Identity

Full Name
Cell Identity
Abbreviation
cellIdentity
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Network operators must allocate a unique code to each cell in a location
Description
area to identify every cell.
Instance
Cell
0..65535
Unit
N/A
Default Value
Default Value
None
This parameter should be set according to radio
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.3 BCCH arfcn

Full Name
BCCH arfcn
Abbreviation
bcchFrequency
2-466
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ARFCN of the BCCH carrier in the cell.
Instance
Cell
0..1023
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.4 NCC
Full Name
NCC
Abbreviation
ncc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-467
SJ-20130408140048-016|2013-07-17(R1.0)
NCC is one of the composition parts of Base Station ID Code (BSIC)

(BSIC = NCC + BCC). which is used to enable the MS to distinguish adjacent and different GSM PLMN cells. Normally, adjacent operators shall
have different NCCs. The parameter related to NCC is NccPermitted of
the cell. By prohibiting MS to report related NCC in the cell, MS is prohibited to measure the cell information of the related operators. Actually,
NCC occupies three bits. NCC is one of the network identification paramDescription
eters.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.5 BCC
Full Name
BCC
Abbreviation
bcc
Managed Object
3GPP Name
N/A
2-468
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
BCC is one of the composition parts of Base Station ID Code (BSIC) (BSIC
= NCC + BCC). Normally, BCC is used to enable MS to distinguish adjacent cells with the same BCCH carrier frequency and belonging to the
same GSM PLMN. In addition, the GSM specifications stipulate that the
TSC (Training Sequence Code) of the broadcast control channel of a cell
shall be equal to the cell BCC. BCC occupies three bits BCC is one of the
Description
network identification parameters.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviation
lac
Managed Object
2-469
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Each GSM PLMN is divided into many location areas (LAs) in order to
determine the MS location, the location area code identifies the different
location areas. LAC comes under LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description
This parameter is consistent with the data at CN side.
Instance
Cell
1..65533, 65535
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.7 MCC
Full Name
MCC
Abbreviation
mcc
Managed Object
3GPP Name
N/A
2-470
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
MCC consists of three digits of decimal number. It is used to uniquely
Description
identify the home country of the mobile user (or system).
Instance
Cell
0..999
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.8 MNC
Full Name
MNC
Abbreviation
mnc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
specific PLMN network in a country (determined by MCC).
MNC consists of three digits of decimal number. It uniquely identifies a
2-471
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..999
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
MNCBcdCodeLen
If MNC3Digits is set to two digits, the mobile network number can only
be two digits of decimal number. If MNC3Digits is set to three digits, the
Relationship
mobile network number can only be three digits of decimal number. If

MNC3Digits is set to two or three digits, the mobile network number can
only be two or three digits of decimal number.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.9 FreqBand
Full Name
FreqBand
Abbreviation
freqBand
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency band of the system.
Instance
Cell
2-472
SJ-20130408140048-016|2013-07-17(R1.0)
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
bcchFrequency
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.10 Cell type

Full Name
Cell type
Abbreviation
cellType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the GERAN External Cell type.
Instance
Cell
2-473
SJ-20130408140048-016|2013-07-17(R1.0)
0: Umbrella Cell
1: Macro Cell
2: Micro Cell
3: Micro-micro Cell
4: Extended Cell
Unit
N/A
Default Value
Default Value
None
This parameter just indicates the type of external
adjacent cells. It does not impact the services.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.11 GPRS service support

Full Name
GPRS service support
Abbreviation
psSupport
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
This parameter describes whether the cell supports GPRS.
Instance
Cell
2-474
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Configuration based on actual demand

This parameter is selected by the adjacent
cell. This cell is selected during the reselection of the GPRS service
cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
If "GPRS Supported (PsSupport)" is No, that
Relationship
is, GPRS is not supported, the system automatically changes all timeslot
channels whose type is PS in the cell to TCH.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.12 Allow SOLSA MS to access

Full Name
Allow SOLSA MS to access
Abbreviation
exc_acc
Managed Object
3GPP Name
EXC_ACC
3GPP Reference
3GPP TS 44.060
2-475
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies whether to allow SoLSA MSs to access the

system. It is broadcast to the MS in the PSI3 and PSI3bis system
messages when PBCCH is configured. When the PBCCH does not
exist, the parameter is sent to specified MSs via the PACKET CELL
CHANGE ORDER message or PACKET MEASUREMENT ORDER
message on the PACCH.
The parameter is used to prevent MSs without SoLSA special right from
residing in the cell. Support of Localized Service Area (SoLSA) is a
local service provided by a cell or a series of cells which can be either
Description
under continuous coverage or not.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
normaly the non-SoLSA MS is not forbidden to access
If MSs with SoLSA access authorization are
expected to access a cell, set this parameter "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.13 LSA ID
Full Name
LSA ID
2-476
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
lsa_Id
Managed Object
3GPP Name
LSA ID
3GPP Reference
3GPP TS 45.008
This parameter indicates the LSA ID of the MS. It is broadcast to the MS
Description
via the SI4 message on the BCCH.
Instance
Cell
0..16777215
Unit
N/A
Default Value
Default Value
None
to network operation planning.
Change Mode
Offline
Related features
ZGB-02-02-006 GPRS MS Controlled Cell Reselection
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.14 RAC (RAC)

Full Name
RAC (RAC)
Abbreviation
rac
Managed Object
3GPP Name
N/A
2-477
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS23.060
RAC is a composition part of Routing Area Identity (RAI). RAI defines the
GPRS serving cell identification. GPRS system divides the location area
(LAs) to several routing areas (RAs) using RAI (MCC+MNC+LAC+RAC).
Routing Area (RA) distribution, similar to GSM system, uses the location
area to manage a group of cells. MS initiates Routing area update
procedure in cell reselection mode if new RAI differs from old RAI during
cell reselection.
SGSN knows the routing area information of the MS in the standby
status. Then, when the network has packet data or circuit data to
transmit, it will page the MS in that routing area. RAI cannot span more
than one SGSN.
Description
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-478
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.15 Cell bar access 2

Full Name
Cell bar access 2
Abbreviation
cellBarAc2
Managed Object
3GPP Name
CELL_BAR ACCESS_2
3GPP Reference
3GPP TS 45.008
This parameter is broadcast to MSs. This parameter, together with the
system parameters CELL_BAR_ACCESS and CELL_BAR_QULIFY,
determines the cell reselection status. 0 indicates that the cell reselection
is in normal status, and 1 indicates that the cell reselection in Forbidden
status. The relation between the CBA2, cell reselection priority, and cell
reselection status is shown in table 1:
CELL_BAR ACCESS_2CBA2 Cell reselection priority Cell
Reselection Status
No Yes Yes
Description
Yes Forbidden Forbidden
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
the parameter is proposed disable owning to relative to PBCCH

This parameter can be set by network operators. Generally all cells
allow the access of MSs and therefore this parameter can be set to
0. In special cases, the telecom operator may expect a cell to provide
handover services only. To meet such a requirement, set this parameter
to 1 (the prerequisite is that CBQ is 0), see figure 1.
Figure 1 Cell BarAccessDiagram
Assume that area A (shadow in the figure) is a busy area, for example,
CBD in a large city. To improve the access performance with the limited
frequency resource, the micro-cell coverage solution is always used.
In addition, to reduce the times of cross-area handovers during MSs

move with a high speed, a dual-layer network is always used. That is,
build base station A (can be configured with a small capacity) to cover
the whole area A. In normal situations, all MSs work in the micro-cell
(This can be accomplished through the cell priority and appropriate
reselection parameters). When an MS moves fast during a conversation,
the network forcibly hands over the MS to base station A. If the MS
is near base station A and at the edge of the micro-cell when the call
is terminated, the MS does not trigger cell reselection because signal
2-479
SJ-20130408140048-016|2013-07-17(R1.0)
quality in base station A is far optimal than micro-cell, as specified in

GSM specifications, see the figure. Thus, the MS cannot return to
the micro-cell. In this case, site A may be congested due to its small
capacity. To solve this problem, set the cell bar access bit to 1 for bases
station A, meaning that MSs cannot directly access site A and only
handover services are allowed in its coverage area.
Note:
This parameter is only applicable for specical scenarios. In normal
situations, set it to 0.
Change Mode
Offline
Related features
N/A
Related Parameters
CellBarAccess
CellBarQualify
The parameterr together with CBQ and CBA, determine the cell
reselection priority and cell reselection state, as shown in the table: CBQ
CBA cell reselection priority cell reselection state
No No Normal Normal
No Yes Forbidden Forbidden
Yes No Low Normal
Relationship
Yes Yes Low Normal

Note: If the following conditions are fulfilled, the cell reselection priority
and cell reselection state are normal.
The cell belongs to the PLMN that MSs camps on.
The MS is in test operation mode.
The cell access forbidden parameter is set "YES".
The cell access forbidden parameter is set "NO".
The access control level "15" is forbidden.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-480
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.16 GPRS access minimal signal level in idle

Full Name
GPRS access minimal signal level in idle
Abbreviation
rxLevAsMin1
Managed Object
3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
3GPP TS 45.008
This parameter used by the MS indicates the minimum Rx level allowed
the MS to access this system (GPRS). This parameter is broadcast to
the MSs by the BTS via the packet system messages on the PBCCH.
The minimum Rx level is used to avoid unsatisfactory call quality when
MS access the system at too low a level, which is a waste of system
resources. This parameter (used for calculating C31 and C32) is one
of the decision-making criteria for cell selection and reselection by the
MS. It is used for the reselection in the idle state, and is only valid when
Description
PBCCH is configured.
Instance
Cell
0..63
Unit
N/A
Default Value
12
Default Value

Generally, the recommended value should be close to the receiving
sensitivity of the MS. For the cell with overloaded traffic, users can
appropriately improve the cell's minimum receiving level, to reduce the
C1 and C32 values of the cell, and to reduce the effective coverage
scope of the cell. Whereas the value of the minimum receiving level
should not be too large, to prevent the cell boundary from any blind
area. It is recommended to set the level value as no more than -90

dBm, to balance traffic. At the initial operation period of the network, this
parameter value can be set to 10 (that is, -101 dBm~-100 dBm) or even
smaller but higher than the receiving sensitivity (-102 dBm) of the MS.
When the network capacity or radio coverage is not a major problem in
some areas, users can increase this parameter value of some cells by 2.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-481
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.17 GPRS MAX initial access signal level in idle

Full Name
GPRS MAX initial access signal level in idle
Abbreviation
msTxmaxCch1
Managed Object
3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
3GPP TS 45.008
This parameter used by the MS indicates the maximum GPRS initial
access level. The parameter is broadcast to the MSs by the BTS via the
packet system messages on the PBCCH. It is used for the reselection in
the idle state, and is only valid when PBCCH is configured.
During the communication between the MS and BTS, the transmission
power of MS is controlled by the network via the power command. The
MS must employ the Tx power specified by the network as its output
power. If the MS cannot produce the specified output power, the output
power closest to the specified value must be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS when
MSs at cell boundaries have a certain access success rate. The
recommended values are 5 (GSM900MS) and 2 (GSM1800MS). In
application, set the parameter to a value, and then perform call test at cell
Description
boundaries to decide whether to improve or reduce the parameter value.
Instance
Cell
0..31
Unit
N/A
Default Value
2-482
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

the higher the value, the stronger the inter-timeslot interrupption near
site, the lower access success propability in the cell edge.The value
should be as low as possible on the premise of some access success

propablity.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.18 Cell reselection offset in idle

Full Name
Cell reselection offset in idle
Abbreviation
reselOff1
Managed Object
3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
3GPP TS 45.008
This parameter used by the MS indicates the GPRS reselection offset. It
is broadcast to the MSs by the BTS via the packet system messages on
the PBCCH. It is used for the reselection in the idle state, and is only
valid when PBCCH is configured. In the GPRS system, C32 is employed
as the criterion for cell reselection.
C32(s) = C1(s) (Serving cell)
C32(n) = C1(n) + GPRS_RESELECT_OFFSET(n) - TO(n) * (1-L(n))
(Neighbor cell)
Description
In the above formula,
2-483
SJ-20130408140048-016|2013-07-17(R1.0)
TO(n) = GPRS_TEMPORARY_OFFSET(n) *
H(GPRS_PENALTY_TIME(n) - T(n)).
L(n) = 0, when PRIORITY_CLASS(n) = PRIORITY_CLASS(s)
1, when PRIORITY_CLASS(n) PRIORITY_CLASS(s)
H(x) = 0, when x < 0
1, when x >= 0
Parameter description:
GPRS_RESELECT_OFFSET provides the offset and hysteresis of each
cell.
GPRS_TEMPORARY_OFFSET is a temporary reselection offset which
contributes a minus offset to C32. The validity duration is decided by
the cell reselection penalty time.
GPRS_PENALTY_TIME indicates the validity duration of the temporary
reselection offset (GPRS_TEMPORARY_OFFSET).
PRIORITY_CLASS indicates the HCS priority of the cell.
Instance
Cell
0..31
Unit
2db
Default Value
Default Value

The priority of access to a cell becomes higher
if this parameter is set higher, and it becomes easier for MS to handover
to this cell during reselection.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-484
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.19 Cell reselection temporary offset in idle

Full Name
Cell reselection temporary offset in idle
Abbreviation
tempOffset1
Managed Object
3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
3GPP TS 45.008
This parameter used by the MS indicates the GPRS reselection
temporary offset. It is broadcast to the MSs by the BTS via the packet
system messages on the PBCCH. It is used for the reselection in the
idle state, and is only valid when PBCCH is configured. In the GPRS
system, C32 is employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
cell.
the cell reselection penalty time (penalTime1).
Description
Instance
Cell
0..7
Unit
db
Default Value
Default Value
Change Mode

The parameter is to avoid the ping-pong cell reselection.If the signal
strenghth RLC_P keeps no long than Penalty Time, MS don't select the
cell.So the parameter is suggested the MAX value.
Offline
2-485
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.20 Penalty time of cell reselection in idle

Full Name
Penalty time of cell reselection in idle
Abbreviation
penalTime1
Managed Object
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
3GPP TS 45.008
This parameter used by the MS indicates the GPRS reselection penalty
time. It is broadcast to the MSs by the BTS via the packet system
messages on the PBCCH. It is used for the reselection in the idle state,
and is only valid when PBCCH is configured. In the GPRS system, C32
is employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
Description
cell.
2-486
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
Cell
0..31
Unit
10 s
Default Value
Default Value

The coverage area and mobility statistical

data should be taken into consideration when setting this parameter.

If a fast-moving MS is not expected to access a micro-cell, the penalty
time should be longer when the micro-cell becomes bigger.For regular
micro-cell, it is recommended to set this parameter 20.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.21 HSC exist in idle

Full Name
HSC exist in idle
Abbreviation
hcs_Exist1
Managed Object

2-487
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used for reselection in the idle state, indicating whether
the Hierarchical Cell Structure (HCS) parameters exist in the cell, including the HCS priority and HCS signal level threshold. If the local cell does
not use HCS parameters, the HCS parameters are neglected in other
Description
cells. In this case, all cells use an infinite HCS signal level threshold.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

When the radio network have different cell

reselection priority, set this parameter "Yes" if the C31 judgment

criteria for the priority cell reselection and signal level threshold
are applied. When more than one cell has the highest priority, C32
judgment criteria should be used for the cells with a same priority.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.22 Threshold of HSC signal level in idle

Full Name
Threshold of HSC signal level in idle
Abbreviation
hcs_Thr1
2-488
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
HCS_THR
3GPP Reference
3GPP TS 45.008
This parameter is used by the MS for reselection in the idle state when
PBCCH is configured, indicating the Hierarchical Cell Structure (HCS)
signal level threshold in the cell. It is broadcast to the MS by the BTS via
Description
system messages on the PBCCH.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

The parameter indicates the minimum access
electricity level threshold. It is easier to access a cell when the
threshold gets lower. Increase the threshold to limit the MS access

to a cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.23 HCS priority in idle

Full Name
HCS priority in idle
Abbreviation
prioClass1
2-489
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
PRIORITY_CLASS
3GPP Reference
3GPP TS 45.008
This parameter is used by the MS for reselection in the idle state when
PBCCH is configured, indicating the cell Hierarchical Cell Structure (HCS)
priority. It is broadcast by the BTS to the MS via system messages on the
Description
PBCCH.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
The priority of an HCS cell gets higher with
the increase of the parameter value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.24 GPRS access minimal signal level in transfer

Full Name
GPRS access minimal signal level in transfer
Abbreviation
rxLevAsMin2
Managed Object
3GPP Name
2-490
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter is used for reselection by the MS in the transfer state,
indicating the minimum Rx level allowed for the MS to access this
system (GPRS). This parameter is broadcast to the MSs by the BTS via
the packet system messages on the PACCH.
The minimum Rx level is used to avoid unsatisfactory call quality when
MS accesses the system at too low a level, which is a waste of system
resources. This parameter (used for calculating C31 and C32) is one
of the decision-making criteria for cell selection and reselection by the
MS. It is used for the reselection in the idle state, and is only valid when
Description
PACCH is configured.
Instance
Cell
0..63
Unit
N/A
Default Value
12
Default Value

Generally, the recommended value should be close to the receiving
sensitivity of the MS. For the cell with overloaded traffic, users can
appropriately improve the cell's minimum receiving level, to reduce the
C1 and C32 values of the cell, and to reduce the effective coverage
scope of the cell. Whereas the value of the minimum receiving level
should not be too large, to prevent the cell boundary from any blind
area. It is recommended to set the level value as no more than -90

dBm, to balance traffic. At the initial operation period of the network, this
parameter value can be set to 10 (that is, -101 dBm~-100 dBm)or even
smaller but higher than the receiving sensitivity (-102 dBm) of the MS.
When the network capacity or radio coverage is not a major problem in
some areas, users can increase this parameter value of some cells by 2.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-491
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.25 GPRS MAX initial access signal level in transfer

Full Name
GPRS MAX initial access signal level in transfer
Abbreviation
msTxmaxCch2
Managed Object
3GPP Name
3GPP Reference
3GPP TS 45.008
This parameter is used for reselection by the MS in the transfer state,
indicating the maximum GPRS initial access level. The parameter is
broadcast to the MSs by the BTS via the packet system messages on
the PACCH. It is only valid when PACCH is configured.
During the communication between the MS and BTS, the transmission
power of MS is controlled by the network via the power command. The
MS must employ the Tx power specified by the network as its output
power. If the MS cannot produce the specified output power, the output
power closest to the specified value must be employed.
This parameter (used for calculating C1 and C2) is one of the
decision-making criteria for cell selection and reselection by the MS.
The configuration principle is to minimize the access level of MS when
MSs at cell boundaries have a certain access success rate. The
recommended values are 5 (GSM900MS) and 2 (GSM1800MS). In
application, set the parameter to a value, and then perform call test at cell
Description
boundaries to decide whether to improve or reduce the parameter value.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

the higher the value, the stronger the inter-timeslot interrupption near
site, the lower access success propability in the cell edge.The value
should be as low as possible on the premise of some access success

propablity.
Change Mode
Offline
2-492
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.26 Cell reselection offset in transfer

Full Name
Cell reselection offset in transfer
Abbreviation
reselOff2
Managed Object
3GPP Name
3GPP Reference
3GPP TS 45.008
This parameter is used for the reselection by the MS in the transfer
state, indicating the GPRS reselection offset. It is broadcast to the MSs
by the BTS via the packet system messages on the PACCH, and is only
valid when PACCH is configured. In the GPRS system, C32 is employed
as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
Description
cell.
2-493
SJ-20130408140048-016|2013-07-17(R1.0)

the cell reselection penalty time.
Instance
Cell
0..31
Unit
2db
Default Value
Default Value

The priority of access to a cell becomes higher
if this parameter is set higher, and it becomes easier for MS to handover
to this cell during reselection.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.27 Cell reselection temporary offset in transfer

Full Name
Cell reselection temporary offset in transfer
Abbreviation
tempOffset2
Managed Object
3GPP Name
2-494
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter is used for the reselection by the MS in the transfer state,
indicating the GPRS reselection temporary offset. It is broadcast to the
MSs by the BTS via the packet system messages on the PACCH, and
is only valid when PACCH is configured. In the GPRS system, C32 is
employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
cell.
Description
Instance
Cell
0..7
Unit
db
Default Value
Default Value

The parameter is to avoid the ping-pong cell reselection.If the signal
strenghth RLC_P keeps no long than Penalty Time, MS don't select the
cell.So the parameter is suggested the MAX value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-495
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.28 Penalty time of cell reselection in transfer

Full Name
Penalty time of cell reselection in transfer
Abbreviation
penalTime2
Managed Object
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
3GPP TS 45.008
This parameter is used for the reselection by the MS in the transfer
state, indicating the GPRS reselection penalty time. It is broadcast to
the MSs by the BTS via the packet system messages on the PACCH,
and is only valid when PACCH is configured. In the GPRS system, C32
is employed as the criterion for cell reselection.
(Neighbor cell)
H(x) = 0, when x < 0
1, when x >= 0
cell.
Description
2-496
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..31
Unit
10 s
Default Value
Default Value

The coverage area and mobility statistical

data should be taken into consideration when setting this parameter.

If a fast-moving MS is not expected to access a micro-cell, the penalty
time should be longer when the micro-cell becomes bigger.For regular
micro-cell, it is recommended to set this parameter 20.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.29 HSC exist in transfer

Full Name
HSC exist in transfer
Abbreviation
hcs_Exist2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-497
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used for reselection in the transfer state, indicating

whether the Hierarchical Cell Structure (HCS) parameters exist in the cell,
including the HCS priority and HCS signal level threshold. If the local
cell does not use HCS parameters, the HCS parameters are neglected in
Description
other cells. In this case, all cells use an infinite HCS signal level threshold.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.30 Threshold of HSC signal level in transfer

Full Name
Threshold of HSC signal level in transfer
Abbreviation
hcs_Thr2
Managed Object
3GPP Name
HCS_THR
2-498
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter is used by the MS for reselection in the transfer state
when PACCH is configured, indicating the Hierarchical Cell Structure
(HCS) signal level threshold in the cell. It is broadcast to the MS by the
Description
BTS via system messages on the PACCH.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value


to a cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.31 HCS priority in transfer

Full Name
HCS priority in transfer
Abbreviation
prioClass2
Managed Object
3GPP Name
PRIORITY_CLASS
2-499
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter is used by the MS for reselection in the transfer state when
PACCH is configured, indicating the cell Hierarchical Cell Structure (HCS)
priority. It is broadcast by the BTS to the MS via system messages on the
Description
PACCH.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.32 MAX power level of MS

Full Name
MAX power level of MS
Abbreviation
MsTxPwrMax
Managed Object
3GPP Name
MS_TXPWR_MAX
3GPP Reference
3GPP TS 45.008
2-500
SJ-20130408140048-016|2013-07-17(R1.0)
During the communication between the MS and the BTS, the

transmission power is controlled by the network. The network sets
the power for MS through the power command and the command is
transmitted on SACCH (SACCH has 2 header bytes, one is the power
control byte and the other is the timing advance byte).
MS must extract the power control header from downward SACCH and
takes the specified transmission power as output power. If the power
level of MS cannot output the power value, it will output the closest
transmission power that can be output. During BSC power control, this
parameter determines the maximum transmission power available for
Description
MS in the cell. BSC also uses it to calculate PBGT value.
Instance
Cell
0..31
Unit
N/A
{freqBand==0}5,
{freqBand==1}5,
{freqBand==2}0,
{freqBand==4}0,
Default Value
{freqBand==7}5
Default Value
Maximum power of the majority of mobile phone
For 900 M, set the parameter to 5; for 1800
M, set it to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2-501
SJ-20130408140048-016|2013-07-17(R1.0)
2.10.33 RemoteSp DN
Full Name
RemoteSp DN
Abbreviation
refRemoteSp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the DN of the adjacent BSC.
Instance
Cell
N/A
Unit
N/A
Default Value
Default Value
N/A

Set this parameter based on the on-site planning
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.10.34 Um soft Synchronous Support

Full Name
Um soft Synchronous Support
Abbreviation
UmSynSupport
Managed Object

2-502
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Enables/Disables the Um soft synchronous function.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default this parameter is set to "No".
This parameter is set to "Yes" if the soft synchronization function on the
air interface needs to be enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
Gumsyn.UmSynSupport
When the Gumsyn.UmSynSupport parameter is set to "enbaled", this
Relationship
parameter must be set to "Enabled" to activate the Um soft Synchronous

function for the external neighbor cell.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11 External UTRAN FDD Cell Configuration

(GExternalUtranCellFDD)
2.11.1 External UTRAN FDD Cell ID
Full Name
External UTRAN FDD Cell ID
2-503
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
GExternalUtranCellFDD
Managed Object
External UTRAN FDD Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External UTRAN FDD Cell ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Resource Configuration->External UTRAN FDD Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
Full Name
CI
Abbreviation
ci
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
2.11.2 CI
2-504
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the CELL ID (CI) of a UTRAN FDD cell. To distinguish each cell in GSM PLMN uniquely, the network operator allocates
Description
a unique ID for each cell in a location area.
Instance
External Utran Neighbor Cell
0..65535
Unit
N/A
Default Value
Default Value
This parameter should be configured according to radio parameter
planning.
to radio parameter planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.3 MCC
Full Name
MCC
Abbreviation
mcc
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
Cell
2-505
SJ-20130408140048-016|2013-07-17(R1.0)
0..999
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.4 MNC
Full Name
MNC
Abbreviation
mnc
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
Cell
0..999
Unit
N/A
Default Value
2-506
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
MNCBcdCodeLen
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.5 RNC ID
Full Name
RNC ID
Abbreviation
rnc_id
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Each RNC has a unique number in the UTRAN network of PLMN to route
Description
corresponding UTRAN interface message correctly.
Instance
Cell
0..4095
Unit
N/A
Default Value
2-507
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
planning.
Change Mode
Offline
Related features
ZGO-02-03-009 GSM/WCDMA Interworking Phase II
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviation
lac
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
Cell
1..65533, 65535
Unit
N/A
Default Value
2-508
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.7 UTRAN cell frequency

Full Name
UTRAN cell frequency
Abbreviation
arfcn3g
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
Description
This parameter means the frequency range of UTRAN FDD cells.
Instance
Cell
10562..10838,9662..9938,1162..1513,1537..1738,4357..4458,4387..441
3,2237..2563,2937..3088,9237..9387,3112..3388,3712..3812,412,437,4
62,487,512,537,562,587,612,637,662,687,1887,1912,1937,1962,1987,2
012,2037,2062,2087,1007,1012,1032,1037,1062,1087,1037,1062,2587,
2612,2637,2662,2687,2712,2737,2762,2787,2812,2837,2862,2887,291
2,3412,3437,3462,3487,3512,3537,3562,3587,3612,3637,3662,3687
Unit
N/A
Default Value
2-509
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
planning.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.8 Scrambling code

Full Name
Scrambling code
Abbreviation
scCode
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the scrambling of UTRAN FDD cells.
Instance
0..511,65535
Unit
N/A
Default Value
Default Value
planning.
2-510
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.9 TX diversity indication

Full Name
TX diversity indication
Abbreviation
diversity
Managed Object

Diversity 44.018\
3GPP Name
Diversity TDD25.224
3GPP Reference
3GPP TS 44.018
This parameter determines whether UTRAN adjacent cell uses transmis-
Description
sion diversity.
Instance
External Neighbor Cell
0..1
Unit
N/A
Default Value
Default Value
Generally, Tx diversity is not used.
This parameter should be set according to adjacent
3G cells.
Change Mode
Offline
Related features
ZGO-02-03-002 GSM/WCDMA Interworking Phase I
2-511
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.10 RAC (RAC)

Full Name
RAC (RAC)
Abbreviation
rac
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
cell reselection.
than one SGSN.
Description
Instance
Cell
0..255
Unit
N/A
Default Value
2-512
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.11.11 Whether an external 3G cell is included in GSM system.

Full Name
Whether an external 3G cell is included in GSM system.
Abbreviation
inner3GNcell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
External
0: No
1: Yes
Unit
N/A
Default Value
Default Value
planning.

2-513
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.12 External UTRAN TDD Cell Configuration

(GExternalUtranCellTDDLcr)
2.12.1 External UTRAN TDD Cell ID
Full Name
External UTRAN TDD Cell ID
Abbreviation
GExternalUtranCellTDDLcr
Managed Object
External UTRAN TDD Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External UTRAN TDD Cell ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
2-514
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Resource Configuration->External UTRAN TDD Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
Full Name
CI
Abbreviation
ci
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
2.12.2 CI
To distinguish each cell in GSM PLMN uniquely, the network operator

Description
allocates a unique code for each cell in a location area.
Instance
0..65535
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-515
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.12.3 MCC
Full Name
MCC
Abbreviation
mcc
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
0..999
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-516
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.12.4 MNC
Full Name
MNC
Abbreviation
mnc
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
0..999
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-517
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.12.5 RNC ID
Full Name
RNC ID
Abbreviation
rnc_id
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Each RNC has a unique number in the UTRAN network of PLMN to route
Description
corresponding UTRAN interface message correctly.
Instance
0..4095
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-518
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.12.6 LAC (LAC)

Full Name
LAC (LAC)
Abbreviation
lac
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 48.008
Description
Instance
1..65533, 65535
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-519
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.12.7 UTRAN cell frequency

Full Name
UTRAN cell frequency
Abbreviation
arfcn3g
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
Description
This parameter means the frequency range of UTRAN adjacent cell.
Instance

{bandWidth3g==0}[9512..9588][10062..10113][9262..9538][9662..9938][
9562..9638][12862..13088][2112][2137][2162][2187][2212][2237][2262][
2287][2312][2337],
{bandWidth3g==1}[9504..9596][10054..10121][9254..9546][9654..9946][
9554..9646][12854..13096][11504..11996]
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-520
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.12.8 UTRAN TDD cell parameter

Full Name
UTRAN TDD cell parameter
Abbreviation
CellPara
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
Description
Cell parameter of UTRAN TDD cells.
Instance
0..127, 65535
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-521
SJ-20130408140048-016|2013-07-17(R1.0)
2.12.9 TX diversity indication

Full Name
TX diversity indication
Abbreviation
diversity
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter determines whether UTRAN adjacent cell uses transmis-
Description
sion diversity.
Instance

0: No
1: Yes
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.12.10 RAC (RAC)

Full Name
RAC (RAC)
2-522
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
rac
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
RAC is a composition part of Routing Area Identity (RAI). RAI defines
the GPRS serving cell identification. GPRS system divides the location
area (LAs) to several routing areas (RAs) using RAI
(MCC+MNC+LAC+RAC). Routing Area (RA) distribution, similar to GSM system, uses the location
cell reselection.
than one SGSN.
Description
Instance
0..255
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-523
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.12.11 UTRAN adjacent cell bandwidth

Full Name
UTRAN adjacent cell bandwidth
Abbreviation
bandWidth3g
Managed Object
3GPP Name
Bandwidth_TDD25.331
3GPP Reference
3GPP TS 44.018
When CellType3G is set to "TDD", this parameter appears and can be
Description
set, indicating the bandwidth of the selected adjacent UTRAN cell.
Instance

0: 3.84Mcps
1: 1.28Mcps
Unit
N/A
Default Value
Default Value
The value 3.84 Mcps is not used any more.
3G cells.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-524
SJ-20130408140048-016|2013-07-17(R1.0)
2.12.12 Apply Sync Case / Apply TSTD

Full Name
Apply Sync Case / Apply TSTD
Abbreviation
syncCaseTstd
Managed Object

Sync Case TSTD
3GPP Name
25.30425.224
3GPP Reference
3GPP TS 44.018
This parameter decides whether to use SyncCase or TSTD. TSTD refers
to time switched transmit diversity. SyncCase refers to synchronization
Description
mode is not used currently.
Instance
0..1
Unit
N/A
Default Value
Default Value
The default value varies with applications.
3G cells.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-525
SJ-20130408140048-016|2013-07-17(R1.0)
2.12.13
GSM system.
Full Name
GSM system.
Abbreviation
inner3GNcell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance

0: No
1: Yes
Unit
N/A
Default Value
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-526
SJ-20130408140048-016|2013-07-17(R1.0)
2.13 External E-UTRAN FDD Cell Configuration

(GExternalEutranCellFDD)
2.13.1 External E-UTRAN FDD Cell Configuration ID
Full Name
External E-UTRAN FDD Cell Configuration ID
Abbreviation
GExternalEutranCellFDD
Managed Object
External E-UTRAN FDD Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External E-UTRAN FDD Cell Configuration ID
Instance
None
1..65535
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Resource Configuration->External E-UTRAN FDD Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-527
SJ-20130408140048-016|2013-07-17(R1.0)
2.13.2 MCC
Full Name
MCC
Abbreviation
mcc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..999
Unit
N/A
Default Value
Default Value
None
according to actual network configuration.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.3 MNC
Full Name
MNC
Abbreviation
mnc
2-528
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..999
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
MNCBcdCodeLen
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.4 EUTRAN NODEB Identification

Full Name
EUTRAN NODEB Identification
Abbreviation
enbId
2-529
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
eNB
3GPP Reference
3GPP TS 36413
Description
This parameter determines the ID of an LTE cell.
Instance
Cell
0..1048575
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
If ENBInd is 0, it indicates the macro base station and this parameter
Relationship
value is 0~FFFFF. If ENBInd is 1, it indicates the household base station

and this parameter value is 0~FFFFFFF.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.5 Physical layer cell identity of LTE CELL

Full Name
Physical layer cell identity of LTE CELL
Abbreviation
PCID
Managed Object
3GPP Name
PCID
2-530
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 36211
Description
This parameter determines the physical ID of an LTE cell.
Instance
Cell
0..503
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.6 specified EARFCN of E-UTRAN cells

Full Name
specified EARFCN of E-UTRAN cells
Abbreviation
ArfcnLTE
Managed Object
3GPP Name
EARFCN
3GPP Reference
3GPP TS 36104
Description
This parameter determines the frequency of an adjacent LTE cell.
Instance
Cell
0..65535
2-531
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.7 Tracking area code

Full Name
Tracking area code
Abbreviation
TAC
Managed Object
3GPP Name
TAC
3GPP Reference
3GPP TS 23401
Description
This parameter determines the ID of a trace cell.
Instance
Cell
0..65535
Unit
N/A
Default Value
Default Value
None
2-532
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.8 The attribute of LTE NodeB

Full Name
The attribute of LTE NodeB
Abbreviation
ENBInd
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 36413
Description
This parameter determines the attribute of an LTE NodeB.
Instance
Cell
0: Macro eNB
1: Home eNB
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
2-533
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.9 the minimum value of the channel bandwidth

Full Name
the minimum value of the channel bandwidth
Abbreviation
measureBandwidth
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 36104
This parameter specifies the minimum bandwidth of an LTE neighbor
channel. It indicates the number of resource blocks that can be mea-
Description
sured by the MS.
Instance
Cell
0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
7: reserved
Unit
N/A
Default Value
Default Value
None
2-534
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.13.10 EUTRAN CELL Identification

Full Name
EUTRAN CELL Identification
Abbreviation
EUTRANID
Managed Object
3GPP Name
eNB
3GPP Reference
3GPP TS 36413
Description
EUTRAN cell ID
Instance
Cell
{ENBInd==0}[0],
{ENBInd==1}[0..255]
Unit
N/A
Default Value
Default Value
N/A

It depends on the actual planning.
Change Mode
Offline
2-535
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
If the ENBInd parameter is set to 0, it represents macro base station,
Relationship
and the value range of the enbId parameter is 0-FFFFF. If the ENBInd
parameter is set to 1, it represents home base station, and the value
range of the enbId parameter is 0-FFFFFFF.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14 External UTRAN FDD Cell CRRM Configuration

(GCrrmNCellLdFDD)
2.14.1 External UTRAN FDD Cell CRRM ID
Full Name
External UTRAN FDD Cell CRRM ID
Abbreviation
GCrrmNCellLdFDD
Managed Object
External UTRAN FDD Cell CRRM Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External UTRAN FDD Cell CRRM ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None
2-536
SJ-20130408140048-016|2013-07-17(R1.0)

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration-

>External UTRAN FDD Cell CRRM Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.2 Cs Remained User Num Low Threshold

Full Name
Cs Remained User Num Low Threshold
Abbreviation
csRemUserLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a threshold used by a GSM network to determine
whether the remaining number of accessible CS subscribers in an FDD
Description
neighbor cell is low.
Instance
0..65535
Unit
N/A
Default Value
Default Value
general value
2-537
SJ-20130408140048-016|2013-07-17(R1.0)

If the threshold is high, services are difficult to be handed over to the

FDD neighbor cell. If the threshold is low, the handover is easy to be
implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Resource Configuration->External UTRAN FDD Cell Configuration>External UTRAN FDD Cell CRRM Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.3 Ps Remained User Num Low Threshold

Full Name
Ps Remained User Num Low Threshold
Abbreviation
psRemUserLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible PS subscribers in an FDD
Description
Instance
0..65535
Unit
N/A
Default Value
Default Value
general value
2-538
SJ-20130408140048-016|2013-07-17(R1.0)

If the threshold is high, services are difficult to be reselected to the

FDD neighbor cell. If the threshold is low, the reselection is easy to
be implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.4 Cs Remained User Num Medium Threshold

Full Name
Cs Remained User Num Medium Threshold
Abbreviation
csRemUserMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible CS subscribers in an FDD
Description
neighbor cell is medium.
Instance
0..65535
Unit
N/A
Default Value
10
Default Value
general value
2-539
SJ-20130408140048-016|2013-07-17(R1.0)


implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.5 Ps Remained User Num Medium Threshold

Full Name
Ps Remained User Num Medium Threshold
Abbreviation
psRemUserMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible PS subscribers in an FDD
Description
Instance
0..65535
Unit
N/A
Default Value
10
Default Value
general value
2-540
SJ-20130408140048-016|2013-07-17(R1.0)


be implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.6 Uplink Load Low Threshold

Full Name
Uplink Load Low Threshold
Abbreviation
ulLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-541
SJ-20130408140048-016|2013-07-17(R1.0)

Adjust this parameter based on the network operating load and

balancing policy. When FDD load is not high and FDD is expected to
absorb traffic, set the threshold to a higher value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.7 Uplink Load Medium Threshold

Full Name
Uplink Load Medium Threshold
Abbreviation
ulLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-542
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.8 Uplink Load High Threshold

Full Name
Uplink Load High Threshold
Abbreviation
ulLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-543
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.9 Downlink Load Low Threshold

Full Name
Downlink Load Low Threshold
Abbreviation
dlLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-544
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.10 Downlink Load Medium Threshold

Full Name
Downlink Load Medium Threshold
Abbreviation
dlLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-545
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.11 Downlink Load High Threshold

Full Name
Downlink Load High Threshold
Abbreviation
dlLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-546
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.12 Real Time Uplink Load Low Threshold

Full Name
Real Time Uplink Load Low Threshold
Abbreviation
ulRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-547
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.13 Real Time Uplink Load Medium Threshold

Full Name
Real Time Uplink Load Medium Threshold
Abbreviation
ulRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-548
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.14 Real Time Uplink Load High Threshold

Full Name
Real Time Uplink Load High Threshold
Abbreviation
ulRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-549
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.15 Real Time Downlink Load Low Threshold

Full Name
Real Time Downlink Load Low Threshold
Abbreviation
dlRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-550
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.16 Real Time Downlink Load Medium Threshold

Full Name
Real Time Downlink Load Medium Threshold
Abbreviation
dlRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-551
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.17 Real Time Downlink Load High Threshold

Full Name
Real Time Downlink Load High Threshold
Abbreviation
dlRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-552
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.18 Not Real Time Uplink Load Low Threshold

Full Name
Not Real Time Uplink Load Low Threshold
Abbreviation
ulNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-553
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.19 Not Real Time Uplink Load Medium Threshold

Full Name
Not Real Time Uplink Load Medium Threshold
Abbreviation
ulNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-554
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.20 Not Real Time Uplink Load High Threshold

Full Name
Not Real Time Uplink Load High Threshold
Abbreviation
ulNRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-555
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.21 Not Real Time Downlink Load Low Threshold

Full Name
Not Real Time Downlink Load Low Threshold
Abbreviation
dlNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an FDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-556
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.22 Not Real Time Downlink Load Medium Threshold

Full Name
Not Real Time Downlink Load Medium Threshold
Abbreviation
dlNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an FDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-557
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.14.23 Not Real Time Downlink Load High Threshold

Full Name
Not Real Time Downlink Load High Threshold
Abbreviation
dlNRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an FDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-558
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.15 External UTRAN TDD Cell CRRM Configuration

(GCrrmNCellLdTDDLcr)
2.15.1 External UTRAN TDD Cell CRRM ID
Full Name
External UTRAN TDD Cell CRRM ID
Abbreviation
GCrrmNCellLdTDDLcr
Managed Object
External UTRAN TDD Cell CRRM Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External UTRAN TDD Cell CRRM ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
2-559
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Resource Configuration->External UTRAN TDD Cell Configuration>External UTRAN TDD Cell CRRM Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.15.2 Cs Remained User Num Low Threshold

Full Name
Cs Remained User Num Low Threshold
Abbreviation
csRemUserLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether a 3G TDD external cell is an internal
cell of a dual-mode controller. Configure this parameter for dual-mode
Description
GSM/TD-SCDMA controllers.
Instance
0..65535
Unit
N/A
Default Value
Default Value
general value
2-560
SJ-20130408140048-016|2013-07-17(R1.0)


implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.15.3 Ps Remained User Num Low Threshold

Full Name
Ps Remained User Num Low Threshold
Abbreviation
psRemUserLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible PS subscribers in an TDD
Description
Instance
0..65535
Unit
N/A
Default Value
Default Value
general value
2-561
SJ-20130408140048-016|2013-07-17(R1.0)


be implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.15.4 Cs Remained User Num Medium Threshold

Full Name
Cs Remained User Num Medium Threshold
Abbreviation
csRemUserMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible CS subscribers in an TDD
Description
Instance
0..65535
Unit
N/A
Default Value
10
Default Value
general value
2-562
SJ-20130408140048-016|2013-07-17(R1.0)


implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.15.5 Ps Remained User Num Medium Threshold

Full Name
Ps Remained User Num Medium Threshold
Abbreviation
psRemUserMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
whether the remaining number of accessible PS subscribers in an TDD
Description
Instance
0..65535
Unit
N/A
Default Value
10
Default Value
general value
2-563
SJ-20130408140048-016|2013-07-17(R1.0)


be implemented.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-564
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-565
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the UL load of an TDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-566
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-567
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-568
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the DL load of an TDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-569
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-570
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-571
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time UL load of an TDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-572
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-573
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-574
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the real-time DL load of an TDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-575
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-576
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-577
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulNRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time UL load of an TDD neighbor cell is high.
Instance
1..100
Unit
Default Value
80
Default Value
general value
2-578
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an TDD neighbor cell is low.
Instance
1..100
Unit
Default Value
20
Default Value
general value
2-579
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an TDD neighbor cell is medium.
Instance
1..100
Unit
Default Value
50
Default Value
general value
2-580
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
whether the non-real-time DL load of an TDD neighbor cell is high.
Instance
Utran
1..100
Unit
Default Value
80
Default Value
general value
2-581
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16 External E-UTRAN TDD Cell Configuration

(GExternalEutranCellTDD)
2.16.1 External E-UTRAN TDD Cell Configuration ID
Full Name
External E-UTRAN TDD Cell Configuration ID
Abbreviation
GExternalEutranCellTDD
Managed Object
External E-UTRAN TDD Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
External E-UTRAN TDD Cell Configuration ID
Instance
None
1..65535
Unit
N/A
Default Value
N/A
2-582
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Resource Configuration->External E-UTRAN TDD Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.2 MCC
Full Name
MCC
Abbreviation
mcc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..999
Unit
N/A
Default Value
NA
Default Value
None

2-583
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.3 MNC
Full Name
MNC
Abbreviation
mnc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..999
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
MNCBcdCodeLen
2-584
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.4 EUTRAN NODEB Identification

Full Name
EUTRAN NODEB Identification
Abbreviation
enbId
Managed Object
3GPP Name
eNB
3GPP Reference
3GPP TS 36413
Description
This parameter determines the ID of an LTE cell.
Instance
Cell
0..1048575
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-585
SJ-20130408140048-016|2013-07-17(R1.0)
If ENBInd is 0, it indicates the macro base station and this parameter

Relationship
value is 0~FFFFF. If ENBInd is 1, it indicates the household base station

and this parameter value is 0~FFFFFFF.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.5 Physical layer cell identity of LTE CELL

Full Name
Physical layer cell identity of LTE CELL
Abbreviation
PCID
Managed Object
3GPP Name
PCID
3GPP Reference
3GPP TS 36211
Description
This parameter determines the physical ID of an LTE cell.
Instance
Cell
0..503
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
2-586
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.6 specified EARFCN of E-UTRAN cells

Full Name
specified EARFCN of E-UTRAN cells
Abbreviation
ArfcnLTE
Managed Object
3GPP Name
EARFCN
3GPP Reference
3GPP TS 36104
Description
This parameter determines the frequency of an adjacent LTE cell.
Instance
Cell
0..65535
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-587
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.16.7 Tracking area code

Full Name
Tracking area code
Abbreviation
TAC
Managed Object
3GPP Name
TAC
3GPP Reference
3GPP TS 23401
Description
This parameter determines the ID of a trace cell.
Instance
Cell
0..65535
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-588
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.16.8 The attribute of LTE NodeB

Full Name
The attribute of LTE NodeB
Abbreviation
ENBInd
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 36413
Description
This parameter determines the attribute of an LTE NodeB.
Instance
Cell
0: Macro eNB
1: Home eNB
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-589
SJ-20130408140048-016|2013-07-17(R1.0)
2.16.9 the minimum value of the channel bandwidth

Full Name
the minimum value of the channel bandwidth
Abbreviation
measureBandwidth
Managed Object
3GPP Name
NRB
3GPP Reference
3GPP TS 36104
This parameter specifies the minimum bandwidth of an LTE neighbor
channel. It indicates the number of resource blocks that can be mea-
Description
sured by the MS.
Instance
Cell
0: NRB = 6
1: NRB = 15
2: NRB = 25
3: NRB = 50
4: NRB = 75
5: NRB = 100
6: reserved
7: reserved
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-590
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.16.10 EUTRAN CELL Identification

Full Name
EUTRAN CELL Identification
Abbreviation
EUTRANID
Managed Object
3GPP Name
eNB
3GPP Reference
3GPP TS 36413
Description
EUTRAN cell ID
Instance
Cell
{ENBInd==0}[0],
{ENBInd==1}[0..255]
Unit
N/A
Default Value
NA
Default Value
N/A

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
If the ENBInd parameter is set to 0, it represents macro base station,
Relationship
and the value range of the enbId parameter is 0-FFFFF. If the ENBInd
parameter is set to 1, it represents home base station, and the value
range of the enbId parameter is 0-FFFFFFF.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-591
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17 GSM Cell Configuration (GGsmCell)

2.17.1 GSM Cell Configuration ID
Full Name
GSM Cell Configuration ID
Abbreviation
GGsmCell
Managed Object
GSM Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
GSM Cell Configuration ID
Instance
None
1..108
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->Cell Information

Configuration->GSM Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-592
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.2 CI
Full Name
CI
Abbreviation
cellIdentity
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Network operators must allocate a unique code to each cell in a location
Description
area to identify every cell.
Instance
Cell
0..65535
Unit
N/A
Default Value
NA
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.3 NCC
Full Name
NCC
Abbreviation
ncc
2-593
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
NCC is one of the composition parts of Base Station ID Code (BSIC)
(BSIC = NCC + BCC). which is used to enable the MS to distinguish adjacent and different GSM PLMN cells. Normally, adjacent operators shall
have different NCCs. The parameter related to NCC is NccPermitted of
the cell. By prohibiting MS to report related NCC in the cell, MS is prohibited to measure the cell information of the related operators. Actually,
NCC occupies three bits. NCC is one of the network identification param-
Description
eters.
Instance
Cell
0..7
Unit
N/A
Default Value
NA
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.4 BCC
Full Name
BCC
2-594
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
bcc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
BCC is one of the composition parts of Base Station ID Code (BSIC) (BSIC
= NCC + BCC). Normally, BCC is used to enable MS to distinguish adjacent cells with the same BCCH carrier frequency and belonging to the
same GSM PLMN. In addition, the GSM specifications stipulate that the
TSC (Training Sequence Code) of the broadcast control channel of a cell
shall be equal to the cell BCC. BCC occupies three bits BCC is one of the
Description
network identification parameters.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-595
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.5 TSC
Full Name
TSC
Abbreviation
tsc
Managed Object
3GPP Name
TSC
3GPP Reference
N/A
This parameter represents Training Serial Code (TSC) of the timeslot.
There are eight types of TSC, with low mutual dependency. It is used for
reference of delay compensation for adaptive balance circuit at receiving
side. For the timeslot where BCCH is, this parameter must be equal to
Description
BCC of the cell.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-596
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.6 MIN received signal level to access

Full Name
MIN received signal level to access
Abbreviation
rxLevAccessMin
Managed Object
3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
3GPP TS 45.008
To prevent the MS from accessing the system at a low receiving signal
level (usually, the poor communication quality cannot guarantee normal
communications after access), and from unreasonably wasting the radio
sources of network, it is prescribed in the GSM system that the receiving
level be greater than a threshold for MS to access the network, that is,
MS Min RxLev to Access (the minimum receiving level for the MS to
access the network).
In addition, it is one of the criteria for MS to select and reselect the cell.
The parameter will be broadcast to all MSs in a cell through the
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages.
MIN received signal level to access is one of the cell selection
parameters. Recommended value is usually approximated according
to MS receiving sensitivity.
When network observes uneven traffic distribution in certain cells, MIN
received signal level to access increases the resulting C1 and
C2 to decrease the cell effective coverage range. However, the value of
this parameter cannot be too large. Otherwise, large value change
can bring void area across cell boundaries to result in sudden call
drop problem.
With this measure for traffic balance, it is suggested that the level value
should not exceed -90 dBm. Define the parameter value to 10 (that is,
from -101 dBm ~ -100 dBm) at initial network rollout stage or lower,
which is higher than the receiving sensitivity of MS (that is, -102 dBm).
However, the 2 dB increase in parameter value is allowable in situations
Description
where network coverage is not a problem.
Instance
Cell
0..63
Unit
N/A
Default Value
10
Default Value
Coverage under the general wireless environment to determine
2-597
SJ-20130408140048-016|2013-07-17(R1.0)
The value can be slightly adjusted based on the actual condition. It

should be no greater than 15.
If the value is increased, the effective coverage range will be reduced,

which helps improve the access success rate but reduces call drop rate.
Change Mode
Offline
Related features
ZGB-02-02-007 Support of C1 Criteria
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.7 Control channel MAX power level

Full Name
Control channel MAX power level
Abbreviation
msTxPwrMaxCCH
Managed Object
3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
3GPP TS 45.008
During the communication between MS and BTS, the transmission
power is controlled by the network. The network sets the power for
MS through the power command and the command is transmitted on
SACCH (SACCH has 2 header bytes, one is the power control byte and
the other is the timing advance byte).
transmission power that can be output.
For SACCH is Channel Associated Signaling and it has to be used
together with SCCCH and TCH, so the power control of MS starts after
Description
MS receives SACCH.
2-598
SJ-20130408140048-016|2013-07-17(R1.0)
The power of MS before receiving SACCH (that is the power when

sending channel request on RACH) is determined by Control channel
MAX power level.
Control channel MAX power level is one of the cell selection and
reselection parameters of MS, involving calculation of C1 and C2 values.
This parameter is broadcasted to all MS in the cell via RIL3_RR
SYSTEM INFORMATION TYPE3 and TYPE4.
Refer to appendix C, for the maximum power before MS receives the
power control information.
If this parameter is set too large, the MS near BTS will interfere the
adjacent channels. If it is too small, the MS at the cell boundaries will
have low access success rate.
The principle of setting this parameter is as follows: Under the
precondition that the MS at the cell boundary is guaranteed with a
certain access success rate, the MS access level should be reduced as
much as possible. Generally, it is recommended to set this parameter as
5 (for GSM900MS) and 0 (for GSM1800MS).
In practice, after setting this parameter, perform dialing test at the cell
edge, increase or decrease the value of this parameter according to the
MS access success rate and access time tested with different parameter
setup.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Maximum power of the majority of mobile phone

The default value is reserved. If the it is set too large, the MS near BTS
will interfere the adjacent channels. If it is too small, the MS at the cell
boundaries will have low access success rate.

The principle for setting the parameter value is: Under the precondition
that the MS at the cell boundary is guaranteed with a certain access
success rate, the MS access level should be reduced as much as
possible.Obviously, the larger the cell coverage is, the higher is the
output power level of the MS. Usually, it is recommended to set this
parameter value as 5 (for GSM900MS) and 0 (for GSM1800MS).
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
2-599
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.8 NCC permitted

Full Name
NCC permitted
Abbreviation
plmnPermitted
Managed Object
3GPP Name
NCC Permitted
3GPP Reference
3GPP TS 44.018
Working in the dedicated mode, a mobile station reports the signal quality
to BTS. Each time the report can contain up to six neighbor cells. Ensure
the report include the cells that are most likely to become the target cell
during switchover. Configure the MS to measure the cells with certain
network color codes. NccPermitted lists the NCC for the cells to be measured by the MS. If the measured NCC is in the list, the corresponding
Description
cell will be reported to the BTS.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
[1,1,1,1,1,1,1,1]
Default Value
In accordance with the configuration required to set the scene
If no special requirement, this parameter should
not be modified.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-600
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.9 GPLMN DN
Full Name
GPLMN DN
Abbreviation
refGMPlmn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Quoted GPLMN DN
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-601
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.10 LocationArea DN
Full Name
LocationArea DN
Abbreviation
refGLocationArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Quoted Location Area DN
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-602
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17.11 Cell Sequence

Full Name
Cell Sequence
Abbreviation
GGsmCellSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Cell Identity
Instance
None
1..108
Unit
N/A
Default Value
NA
Default Value
No default value is available.

Set this parameter based on the on-site cell planning
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-603
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.12 BCCH arfcn

Full Name
BCCH arfcn
Abbreviation
bcchFrequency
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the ARFCN of the BCCH carrier in the cell.
Instance
Cell
0..1023
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.13 Common control channel configuration

Full Name
Common control channel configuration
Abbreviation
CcchConf
Managed Object

2-604
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
CCCH-CONF
3GPP Reference
3GPP TS 44.018
Common control channel configuration is one of the system control
parameters. In GSM system, CCCH includes Access Grant Channel
(AGCH) and Paging Channel (PCH). It is used to send access granting
(that is instant assignment) message and paging message.
In each cell, all service channels share CCCH. According to the
configuration of the service channel in the cell and the traffic mode of the
cell, CCCH could be one or more than one physical channel, and CCCH
could share the same physical channel with SDCCH . The
combination mode of the common control channel in cell depends
on CCCH configuration parameter and it should be consistent with
the actual configuration of cell CCH. It could be observed from this
parameter:
BS_CC_CHANS (Number of CCCH); BS_CCCH_SDCCH_COMB (If
combined with SDCCH).
This parameter is broadcasted to all MSs in the cell by message
Description
RIL3_RR SYSTEM INFORMATION TYPE3.
Instance
Cell
0: CCCH uses one physical channel, not combined with SDCCH
1: CCCH uses one physical channel, combined with SDCCH
2: CCCH uses two physical channels, not combined with SDCCH
4: CCCH uses three physical channels, not combined with SDCCH
6: CCCH uses four physical channels, not combined with SDCCH
Unit
N/A
Default Value
Default Value
In most cases there are more than two carrier frequencies in a cell. A
single SDCCH channel is needed.

The setting of this parameter depends on the traffic load of the location
area that the cell resides. 0 can be the default value (must be consistent
with the configurations of the public control channels). It is recommended
that this value should be identical for the cells in the same local area.
The configuration of CCCH depends on experience: When a cell has

one or two TRXs, a basic physical channel shared with SDCCH is
recommended. When a cell has three or four TRXs, a basic physical
channel not shared with SDCCH is configured.
Change Mode
Offline
Related features
ZGB-03-02-001 Support of SDCCH/4 and SDCCH/8
Related Parameters
tsChannelComb
2-605
SJ-20130408140048-016|2013-07-17(R1.0)
When CcchConf is set as "CCCH uses one physical channel, combined

with SDCCH", the rtimeslot channel combination type of timeslot 0 in
the channel information parameter must be either of the following:
BCCH+SDCCH/4, BCCH+SDCCH/4+CBCH.
When CcchConf is set as "CCCH uses one physical channel, not
combined with SDCCH", the rtimeslot channel combination type of
timeslot 0 in the channel information parameter must be either of the
following: FCCH+SCH+BCCH+CCCH, BCCH+CCCH.
When CcchConf is set as "CCCH uses two physical channels, not
Relationship

timeslots 0 and 2 in the channel information parameter must be the
When CcchConf is set as "CCCH uses three physical channels, not
timeslots 0 , 2, and 4 in the channel information parameter must be the
When CcchConf is set as "CCCH uses four physical channels, not
timeslots 0 , 2, and 4 in the channel information parameter must be the
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.14 PS Support
Full Name
PS Support
Abbreviation
PsSupport
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-606
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether this cell supports GPRS (EDGE) service.If "GPRS supported" or "EDGE supported" is selected, relevant subDescription
pages may appear on the interface.
Instance
Cell
0: Not Support
1: GPRS
2: EDGE
Unit
N/A
Default Value
Default Value

For the cell which does not support PS service, it is set as: Don't support
GPRS;
For the cell which only supports the GPRS service, it is set as: Support

GPRS;
For the cell which supports the GPRS and EDGE services, it is set as:
Support EDGE;
For the cell which supports the GPRS , EDGE and EDGE2 services, it is
set as: Support EDGE2.
The V2 80W BTS only supports CS1/2.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D
Parameter Modifying
Detail
Update
2.17.15 GRoutingArea DN
Full Name
GRoutingArea DN
2-607
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
refGRoutingArea
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
DN in the routing area used to find the corresponding RAC
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.16 Number of blocks reserved for AGCH

Full Name
Number of blocks reserved for AGCH
Abbreviation
bsAgBlkRes
Managed Object
3GPP Name
BS_AG_BLKS_RES
3GPP Reference
N/A
2-608
SJ-20130408140048-016|2013-07-17(R1.0)
CCCH includes Access Granted Channel and Paging Channel. The number of blocks in CCCH reserved for Access Granted Channel must be
configured. To let the MS know the configuration, the system message
sent by each cell will contain a parameter that can be regulated in terms
of the load on various kinds of public channels. The parameter is broadcast to each MS in a cell through the RIL3_RR SYSTEM INFORMATION
Description
TYPE3 message.
Instance
Cell
{si13Locate==0}[0..7],
{si13Locate==1}[1..7]
Unit
N/A
Default Value
Default Value
"2" is a recommended value.
It is recommended that the values of this parameter for all the cells in
the same local area are identical.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.17 Number of multi-frames of the PCH

Full Name
Number of multi-frames of the PCH
Abbreviation
bsPaMframs
Managed Object
3GPP Name
BS_PA_MFRMS
2-609
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Number of multiframes of the PCH specifies the repeat cycle of PCH
group subchannel using multiple 51-MultiFrame structures. It is one
of the system control parameters.
According to GSM Specifications, a unique IMSI identifies MS and
paging group.
IMSI determines the PCH sub-channel for MS in a paging group.
In the actual network, MS only tunes in the paging sub-channel to
which it belongs and ignores the contents of other paging sub-channels,
and shuts off the power supply of some hardware equipment in the
MS to save the power overhead of MS. In other IDLE time, MS shuts
off the hardware equipment power supply to save power. Number of
multiframes of the PCH determines the number of paging sub-channels
of the paging
channel in a cell.
MS uses this parameter to find out its home paging group, so as to
monitor corresponding paging sub-channel. Network broadcasts the
parameter information to all MSs in the cell through the RIL3_RR
SYSTEM INFORMATION TYPE3 message. Number of multiframes of
Description
the PCH is one of the system control parameters.
Instance
Cell
2..9
Unit
N/A
Default Value
Default Value
This parameter should be set as low as possible and the paging channel
should not be overloaded.

The larger this parameter is, the more the paging sub-channels in the
cell is, the less is the number of users on each paging sub-channel, the
longer is the duration of the MS battery, and the longer is the delay of
issueing paging messages.
In the operation network, the paging channel should be periodically
checked on overloading, to adjust this parameter value appropriately. In
general, this parameter value is 6 or 7 for the area with large traffic, 4 or
5 for the cell with modest traffic, and 2 or 3 for the cell with low traffic.
Any paging message in the same location area must be sent in all cells
in this location area, so the paging channel capacity (the number of
paging subchannels calculated for each cell) of each cell n the same
location area should be same or appropriate.
Change Mode
Offline
Related features
ZGB-02-01-001 paging
Related Parameters
N/A
2-610
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.18 Early class-mark sending control

Full Name
Early class-mark sending control
Abbreviation
ecsc
Managed Object
3GPP Name
Early Classmark Sending Control
3GPP Reference
3GPP TS44.018
According to GSM specification, MS transmits appended class mark
information (Classmark 3) to the network through the CLASSMARK
CHANGE message as soon as possible.
Early category classmark sending control determines if the network
supports ECSC function. Network broadcasts the parameter information
to MSs in the cell through RIL3_RR SYSTEM INFORMATION TYPE3
message.
If there is a cell in another frequency band in the adjacent cell for
handover or the current cell itself is extended GSM cell and the function
of early category classmark sending control is enabled, set ECSC as
Description
Yes, otherwise set as No.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Consider network optimization
2-611
SJ-20130408140048-016|2013-07-17(R1.0)
If there is another frequency band in the adjacent

cell for handover or the cell is an extended GSM cell and the network
supports the ECSC function, "ECSC" should be set as True. Otherwise,

it should be set to "Yes". Otherwise it should be set to "No".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.19 CBC support

Full Name
CBC support
Abbreviation
smsCBUsed
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
CBC service is an important service provided by mobile communication
system, mainly used to distribute information to the mobile subscribers
within certain geographical location area. The difference from P2P sms
service contains: receiver for P2P sms is specific mobile subscriber, but
receiver for CBC is all mobile subscribers within certain area, including
external subscribers roaming in this area.
This parameter identifies if this cell supports the function of cell
Description
broadcasting short message.
Instance
Cell
0: No
1: Yes
2-612
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Whether to enable this function depends on
the needs of operators.
Change Mode
Offline
Related features
N/A
Related Parameters
tsChannelComb
If "CBC Supported (SmsCbUsed)" is No, that is, CBC is not supported,
the system automatically finds all time slot channel combinations in the
cell. If CBC channel exists, it is changed to SDCCH. SmsCbUsed
Relationship
If "CBC Supported (SmsCbUsed)" is 'Yes', that is, CBC is supported,

the system automatically finds all time slot channel combinations in
the cell. If a non-BCCH channel is found for a carrier, it is changed to
SDCCH+CBCH.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.20 FreqBand
Full Name
FreqBand
Abbreviation
freqBand
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Frequency band supported by the serving cell.
Instance
Cell
2-613
SJ-20130408140048-016|2013-07-17(R1.0)
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
Default Value
NA
Default Value
The value based on site condition

It is configured as required.
Change Mode
Offline
Related features
ZGO-05-02-002 EGSM Frequency Band Support
Related Parameters
FuncExt
arfcn
The value of DCS1800/PCS1900 supported (FuncExt) has influence on
Relationship
the value range of this parameter.

This parameter value has influence on the value range of CaArfcnList.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.21 Cell type

Full Name
Cell type
Abbreviation
cellType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-614
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the

Description
type of a GERAN external cell.
Instance
Cell
0: Umbrella Cell
1: Macro Cell
2: Micro Cell
3: Micro-micro Cell
4: Extended Cell
Unit
N/A
Default Value
Default Value
None
network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.22 MAX number of re-transmitting events times

Full Name
MAX number of re-transmitting events times
Abbreviation
maxRetrans
Managed Object
3GPP Name
Max retrans
3GPP Reference
3GPP TS 44.018
2-615
SJ-20130408140048-016|2013-07-17(R1.0)
An MS sends a channel request message to the network on the RACH

when initiating an immediate assignment procedure for location update,
starting a call, or responding to a paging message. Because the RACH
is an ALOHA channel, the network allows the MS to send multiple
channel request messages before receiving an immediate assignment
message to improve the access success ratio of the MS. The maximum
allowed number of channel request messages depends on the maximum
number of times that the RACH burst is retransmitted.
This parameter is a system control parameter, which is broadcast to
MSs in a cell through the RIL3_RR SYSTEM INFORMATION TYPE
1, 2, 2bis, 3, and 4.
For cells with light traffic and a radius longer than 3 km, this parameter
can be set to 3, meaning that the maximum allowed number of channel
request messages is 7.
For cells with general traffic and a radius shorter than 3 km, this
parameter can be set to 2, meaning that the maximum allowed number
of channel request messages is 4.
For microcells, the parameter value 1 is recommended, meaning that
the maximum allowed number of channel request messages is 2.
For microcells with heavy traffic and cells with traffic congestion, the
parameter value 0 is recommended, meaning that the maximum allowed
Description
number of channel request messages is 1
Instance
Cell
0: 1 times
1: 2 times
2: 4 times
3: 7 times
Unit
N/A
Default Value
Default Value
Appropriate increase in the number of attempts to increase the success
rate of access

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
2-616
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.23 Number of slots to spread transmission

Full Name
Number of slots to spread transmission
Abbreviation
txInteger
Managed Object
3GPP Name
Tx_integer
3GPP Reference
3GPP TS 44.018
Parameter used at the MS side. It belongs to the PRACH control and
RACH control parameters, and it is broadcast to the MS in the PSI1
message. Whenever establishing a new connection, MS sends a
channel request message to the network through PRACH/RACH
channel.
As PRACH/RACH is an ALOHA channel, to improve MS access success
rate, the network allows MS to send multiple channel request messages
before
receiving packet assignment message. If MS does not receive any
response for the previous channel request message, MS resends
channel request
message after waiting for a random period. Network uses S parameter
to determine random waiting time.
The timeslot interface between two channel request messages should
be valued randomly within {S,S+1,S+T-1}.
The relationship between S and T is as follows.
When T is 3, 8, 14, or 50, S is 55 (CCCH) or 41 (CCH/SDCCH).
When T is 4, 9, or 16, S is 76 (CCCH) or 52 (CCH/SDCCH).
Description
Instance
Cell
0..15
Unit
N/A
2-617
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
14
Default Value
Send to expand the interval to give sufficient time for processing the
network side

The value 14 corresponds to the maximum value

of retransmission interval. If no special requirement, it is recommended
not to modify the parameter value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.24 Cell bar qualify

Full Name
Cell bar qualify
Abbreviation
cellBarQualify
Managed Object
3GPP Name
CELL_BAR_QUALIFY
3GPP Reference
3GPP TS44.018
This parameter preferably selects certain cells in the cell selection
process according to capacity, traffic and functional difference in
overlapping areas.
This function can be implemented by configuring CellBarQualify.
CellBarQualify is used to limit cell priority in special case. Network
broadcasts the parameter information to all MSs in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. It
is one of the cell selection parameters. The validity of this parameter
Description
depends upon cell reselection parameter indication.
2-618
SJ-20130408140048-016|2013-07-17(R1.0)
Select No for Cell Bar Access and No for Cell bar qualify, that is, the
cell priority is defined as Normal. MS preferably enter
some types of cells. Set the priority of this cell type as Normal, while
the priorities of other cells to Low. In some cases, such
as micro cellular application, and dual-frequency networking, this setting
will not affect the cell reselection.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Usually the cell has a normal priority.

Operators can set the priorities of some cells
to "Normal", and set some to "Low". And the "normal" priority cells
should be made to take services as many as possible.
Change Mode
Offline
Related features
ZGB-02-02-007 Cell Selection
Related Parameters
CellBarAccess
The following describes the meaning corresponding to the value of
CellBarQualify and CellBarAccess:
CellBarQualify=0CellBarAccess=0: Cell selection priority is normal,
and cell reselection state is normal.
Relationship
CellBarQualify=0CellBarAccess=1: Cell selection priority is barred,

and cell reselection state is barred.
CellBarQualify=1CellBarAccess=0: Cell selection priority is low, and
cell reselection state is normal.
CellBarQualify=1CellBarAccess=1: Cell selection priority is low, and
cell reselection state is normal.
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-619
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.25 Cell bar access

Full Name
Cell bar access
Abbreviation
cellBarAccess
Managed Object
3GPP Name
CELL_BAR_ACCESS
3GPP Reference
3GPP TS 23.022
PLMN carriers can determine if to allow MS to access a specific cell (for
example the cell in test or the cell for absorbing traffic only).
Network broadcasts Cell bar access information to MS in the cell through
Description
RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4 messages.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
To be opened according to the site need

A cell can be accessed by default.
If the access forbidden switch has been turned on, no MS can access
this cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-620
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.26 Call re-establishment allowed

Full Name
Call re-establishment allowed
Abbreviation
callReestablish
Managed Object
3GPP Name
RE
3GPP Reference
3GPP TS 44.018
For the call drop caused by radio link failure resulted from burst
interference or high building, MS could originate call re-establishment
process to restore the call. However, the network determines if to allow
reestablishment by enabling Call re-establishment allowed.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4, message.
Description
Call re-establishment allowed is one of the network function parameters.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
To be opened according to the site need

The call reestablishment function can improve user experience,

but may increase the call drop rate. In addition, subscribers prefer
hook-on instead of waiting for the resume of the call because the call
reestablishment needs a long time. Generally, it is recommended to
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-621
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17.27 Emergency call allowed

Full Name
Emergency call allowed
Abbreviation
emergencyCall
Managed Object
3GPP Name
Emergency Call allowed
3GPP Reference
3GPP TS44.018
Generally, a valid SIM card is required for any MS in GSM Network to
get various network services. But the operators could decide if to allow
MS emergency call service for the MS without SIM card or with SIM card
whose access level is disabled by current cell, for example the police
station. Select Yes for Emergency call allowed to enable this function.
RIL3_RR SYSTEM INFORMATION TYPE1, 2, 2bis, 3 and 4, message.
Call re-establishment allowed is one of the network function parameters.
No: Do not allow Emergency call for MSs whose access level is 0 ~ 9.
For the MSs whose access level is 11 ~ 15, if its corresponding
access control bit is T, the emergency call is also not allowed.
Yes: Allow emergency call for all MSs. GSM specifications define
emergency call phone number as 112, which is different from Chinese
emergency call, but 112 is generally connected to the automatic voice
service to inform the users about the number of various special services.
Description
Hence, EC shall be set as No, that is to allow the emergency call.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
0
In some countries and regions, dialing the
Default Value
emergency phone number can only get the information of emergency

services
but not the actual emergency services. Therefore, this parameter can
be set to "No" to avoid unnecessary occupation of channels.
Enable or disable the emergency call function
according to the requirement of the local operator.
Change Mode
Offline
2-622
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.28 Access Control

Full Name
Access Control
Abbreviation
accessControl
Managed Object
3GPP Name
Access Control
3GPP Reference
3GPP TS44.018
All MSs in GSM system have an access class (15 classes in total).
The MSs that are in the class ranging between 0 and 9 are common
ones. The MSs that are in the class ranging between 11 and 15 are
special MSs (no access class 10). Therefore, the system can disable
the MSs with certain access classes to access the cell (for example
during the installation and commissioning or the congestion control).
This information can reach MS inside the cell in RIL3_RR SYSTEM
INFORMATION TYPE1, 2, 2bis, 3 and 4 messages through Access
control. It is also one of the system control parameters.
The degree of congestion for any CCCH or processor overload during
congestion control can be reduced by temporarily prohibiting one type or
multiple types of subscribers from accessing the system (for subscribers
of access levels 0 ~ 9). In general, the system shows the following
overload conditions:
RACH overload, which shall be found in the "CCCH LOAD INDICATION"
message and processed by BSS according to the standard GSM08.58;
AGCH overload should be detected in the DELETE INDICATION
Description
message.
2-623
SJ-20130408140048-016|2013-07-17(R1.0)
At that moment, the number of IMMEDIATE REJECT messages or

IMMEDIATE ASSIGNMENT messages that BSS fails to send reaches
a certain number. PCH overload should be detected in the CCCH
LOAD INDICATION message, and BSS only notifies MSC and does
not do any handling.
Other types of overload, which can be found in the OVERLOAD
message, for example, MTP overload.
Type the control level value to do or action.
Instance
Cell
0..1
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Default Value
Usually users are not limited.
Usually the user limitation is configured during
the installation commissioning or the congestion control.
Change Mode
Offline
Related features
ZGB-03-01-001 MS Access Control
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.29 Uplink discontinuous transmission

Full Name
Uplink discontinuous transmission
Abbreviation
dtxUplinkBcch
Managed Object
3GPP Name
DTX
2-624
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS44.018
The Discontinuous Transmission (DTX) mode means that the system
does not transmit signals during the speech intermission of the
subscriber
conversation. This parameter controls how MS uses the DTX mode.
System broadcasts RIL3_RR SYSTEM INFORMATION TYPE3
message to all MSs in the cell. In addition, it may be necessary to
notify MSs of older versions (of the first stage) through the RIL3_RR
SYSTEM INFORMATION TYPE6 message on SACCH. For MSs of
newer versions, the RIL3_RR SYSTEM
INFORMATION TYPE6 message contains Uplink discontinuous
transmission.
This parameter is one of the network function parameters.
The values are as follows:
0: MS could use DTX.
1: MS should use DTX.
2: MS should not use DTX.
If both the BTS equipment and TRAU support the DTX mode, set the
Description
parameter as 1 (use DTX). Otherwise set it to 2 (not use DTX).
Instance
Cell
0: May use uplink DTX
1: Shall use uplink DTX
2: Shall not use uplink DTX
Unit
N/A
Default Value
Default Value
Protocol Recommended

Change Mode
Offline
Related features
ZGO-04-02-004 Discontinuous Transmission Uplink
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-625
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.30 Protection period for access attempt

Full Name
Protection period for access attempt
Abbreviation
t3122
Managed Object
3GPP Name
T3122
3GPP Reference
3GPP TS 44.018
The network sends the IMMEDIATE ASSIGNMENT REJECT message
to MS when it receives a channel request message from MS and will not
allocate a suitable channel to MS. IMMEDIATE ASSIGNMENT REJECT
message contains T3122 timer parameter to prevent possible wireless
channel blocking caused by repeated channel requests sent by the MS,
which is waiting for indication information unit.
MS cannot restart a new call until the time indicated by T3122 is elapsed
if it receives the IMMEDIATE ASSIGNMENT REJECT message.
This parameter is also one of the system control parameters, and is sent
to MS in the IMMEDIATE ASSIGNMENT REJECT message.
Following are the suggested values: 10 s ~ 15 s for normal traffic area;
Description
15 s ~ 25 s for dense traffic area.
Instance
Cell
0..255
Unit
Default Value
10
Default Value
User experience and network resource usage

The recommended value is 10~15 s, and 15~25 s for dense-traffic areas.

It is a gradual process for the cell traffic to change or a fault occurs to and
is removed from a cell. If this parameter is set as too small, the success
rate of request again may be not high, and the system is loaded more
heavily. If this paramter is set as too large, users' feeling becomes poor.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-626
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.31 Multi-band report indication

Full Name
Multi-band report indication
Abbreviation
mulbandReport
Managed Object
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
3GPP TS 45.008
MS in single-frequency GSM system needs only to report contents
of six adjacent cells with the strongest signals in a frequency band,
when reporting the measurement result of adjacent cells to the
network. In multi-band networking, MS can enter with priority into
a specific frequency band during handover. The MS reports the
measurementresult according to the signal intensity and the frequency
band of the signals, according to the actual situation.
Multiband report indication is used to notify MS to report contents of
adjacent cells in multiple frequency bands. It is one of the system
control parameters.
The setting of this parameter is subject to traffic in each frequency band.
General principles to set the parameters are as follows: 0: If the traffic
of each frequency band is almost equivalent, and the operator has no
choice over the frequency band.
3: If the traffic of each frequency band is quite different, and the operator
hopes that MS enters a specific frequency band with priority.
0: MS reports the survey results of six known and allowed adjacent cells
with the strongest NCC according to the signal intensity, regardless
Description
of which frequency band adjacent cells are in.
2-627
SJ-20130408140048-016|2013-07-17(R1.0)
1: MS reports the measurement result of 1 adjacent cells with strongest

signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remaining space, MS reports
adjacent cell in local cell frequency band. If still more space is
available, MS reports the remaining adjacent cells, regardless of which
frequency bands they are in.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
The cell in different frequency bands have more opportunities to report

In the dual-band network scenario, the handover of MS in 1800M and
the traffic shared with 1800M are subject to the following settings: 3:
900M cells report 1800M adjacent cells as often as possible. 1: 1800M

cells report 900M adjacent cells as seldom as possible.

0: In the dual-band network scenario, the contents are reported
according to signal strength, to balance the traffic.
Reasonable setting is useful for traffic balance, congestion improvement.
Whereas, it may influence the handover success rate, calldrop rate,
and coverage rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
2-628
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.32 Redirection enable

Full Name
Redirection enable
Abbreviation
drInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates if to use directed retry process. Network
assigns corresponding service channel for MS in an adjacent cell, if
there is no service channel available in serving cell.
Directed retry indication defines a special handover process that can
reduce the call drop ratio. Directed retry falls into intra-BSC directed
retry and inter-BSC directed retry. The former one does not need the
Description
participation of MSC, while the latter one does.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
It is recommended to enable the directed retry
in areas with heavy traffic.
Change Mode
Offline
Related features
ZGB-03-01-002 Direct Retry
Related Parameters
drIndInterBsc
When this parameter is set to "Yes", the "DrInd_1" parameter can be set.
Relationship
The directed retry function is enabled only when the BSS-level directed
retry (InDrEnable) and the cell-level directed retry are both enabled.
2-629
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.33 Outer redirection enable

Full Name
Outer redirection enable
Abbreviation
drIndInterBsc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to enable the external directed retry,
Description
that is, inter-BSC directed retry.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
It is recommended to enable the external directed
retry in areas with heavy traffic on the coverage border of the iBSC.
Change Mode
Offline
Related features
N/A
Related Parameters
drInd
The parameter can only be set when the "DrInd_0" parameter is set
Relationship
to "Yes".
The external directed retry can be enabled only when this parameter and
the OutDrEnable parameter are both enabled.
2-630
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.34 Downlink discontinuous transmission allowed

Full Name
Downlink discontinuous transmission allowed
Abbreviation
dtxDwlink
Managed Object
3GPP Name
DTX
3GPP TS 44.018
3GPP TS 48.008
3GPP Reference
3GPP TS 48.058
DTX mode is an optional downlink feature of GSM System.
The Discontinuous Transmission (DTX) mode means that the system
does not transmit signals during the speech intermission of the
subscriber conversation. This parameter participates in determining to
use DTX mode in downlink direction.
Actually, using DTX in downlink direction (in CHANNEL ACTIVATION
message and MODE MODIFY message sent to BTS) is determined
together by this parameter and the DTX indication in downlink direction
in ASSIGNMENT REQUEST message and HANDOVER REQUEST
message of MSC.
Yes: enable;
Description
No: not used
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
2-631
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

DTX function can lower the BTS power consumption and reduce the
inner system interference.
When MSC forbids the downlink DTX, it is not used no matter how this
parameter is set;
When MSC allows the downlink DTX, this parameter determines whether
the downlink DTX is used.
Change Mode
Offline
Related features
ZGO-04-02-003 Discontinuous Transmission Downlink
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.35 SI13 sending position

Full Name
SI13 sending position
Abbreviation
si13Locate
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-632
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used at the MS side. SI13 sending position indicates

the scheduling position of SI13 on BCCH.
SI13 is related to the GPRS services. SI13 can be sent on either of the
following: BCCH Norm position. In this case, it occupies the BCCH
block with TC = 4; TC = ((FN DIV 51) mod (8)).
BCCH Ext position. In this case, it occupies one fixed AGCH block
with TC = 0. SI13 is sent with low success rate on the BCCH Ext
position, because SI13 has to compete with other messages, such as
IMMEDIATE ASSIGNMENT message, for delivery opportunity. For this
case, the parameter value of Access Allowed Reserved Blocks must be
Description
set greater than 0. Otherwise, SI13 will not be sent.
Instance
Cell
0: BCCH Norm
1: BCCH Ext
Unit
N/A
Default Value
Default Value
The value BCCH Norm is dependent upon the protocol
recommended value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.36 Queue allowed when assign

Full Name
Queue allowed when assign

2-633
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
queueAssInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow queuing during assignments
Description
when no available channel exists in the cell.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

This switch is only enabled when the queuing function is required on site.

If this switch is enabled, an assignment process can obtain resources by

queuing to improve the call completion rate when no available resource
exists in the system. However, the time for completing a call may be
prolonged.
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
QueueIndAss
AssQueEnable
Two BSC-level parameters are related to this parameter: QueueIndAss
Relationship
and AssQueEnable. The queuing is allowed only when these three

parameters are enabled at the same time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-634
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.37 Forced release indicate when assign

Full Name
Forced release indicate when assign
Abbreviation
preemptionAssInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow forced release during assignments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message.
If this message contains a high priority level and a valid PCI (indicating
this user can preempt the channel of another user), the BSC can forcibly
release the connection to a user whose PVI is reset (indicating the channel of this user can be preempted by another user) and then allocate the
released channel on this assignment request when no resource is imme-
Description
diately assigned to the higher-priority user.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value


first during assignments, you should enable the forced release function.
If the forced release function will be used by AssPreemptstrategy
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
PreemptionIndAss
Relationship
This parameter is valid only when the BSC-level parameter

PreemptionIndAss is set to "2: According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-635
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.38 Forced handover indication for assign

Full Name
Forced handover indication for assign
Abbreviation
forcedAssInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow forced handover during assignments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message. If
this message contains a high priority level and a valid PCI (indicating this
user can preempt the channel of another user), the BSC can hand over
a user whose PVI is reset (indicating the channel of this user can be preempted by another user) to another cell and then allocate the released
channel on this assignment request when no resource is immediately as-
Description
signed to the higher-priority user.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value



switch. If the forced handover function will be used by
AssPreemptstrategy
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
ForcedHolndAss
2-636
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship

ForcedHolndAss is set to "2: According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.39 Queue allowed when handover

Full Name
Queue allowed when handover
Abbreviation
queueHoInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow queuing during handovers
Description
when no available channel exists in the cell.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

This switch is only enabled when the queuing function is required on site.
If this switch is enabled, an external handover process can obtain
resources by queuing when no available resource exists in the system.
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
QueueIndHo
HoQueEnable
2-637
SJ-20130408140048-016|2013-07-17(R1.0)
Two BSC-level parameters are related to this parameter: QueueIndHo

Relationship
and HoQueEnable. The queuing is allowed only when these three

parameters are enabled at the same time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.40 Forced release indicate when handover

Full Name
Forced release indicate when handover
Abbreviation
preemptionHoInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow forced release during handovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can forcibly release the connection to a user whose PVI is
reset (indicating the channel of this user can be preempted by another
user) and then allocate the released resource to this handover request
when no resource is immediately assigned in this handover or the later
Description
handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
2-638
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

first during handovers, you should enable the forced release function.
If the forced release function will be used by HoPreemptstrategy during

the handover, you should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
PreemptionIndHo
Relationship

PreemptionIndHo is set to "2: According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.41 Forced handover indication for handover

Full Name
Forced handover indication for handover
Abbreviation
forcedHoInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-639
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to allow forced handover during handovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can hand over a user whose PVI is reset (indicating the channel
of this user can be preempted by another user) to another cell and then
allocate the released resource to this handover request when no resource
Description
is immediately assigned in this handover or the later handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

switch. If the forced handover function will be used by HoPreemptstrategy

during the handover, you should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
ForcedHolndHo
Relationship

ForcedHolndHo is set to "2: According to the cell".
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-640
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.42 Cipher mode priority 1

Full Name
Cipher mode priority 1
Abbreviation
cipherModePrio1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter records the priority level of the current cipher mode supported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/3". The value
of cipherModePrio1 is set to 0, the value of cipherModePrio2 is set to 3,
and the value of cipherModePrio3 is set to 0. Then the priority levels of
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not sup-
Description
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value
need negotiate with CN

Modify the parameter after negotiating with
the CN. The cipher algorithms from A5/4 to A5/7 are not supported
now.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-641
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
cipherModePrio2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value
Change Mode

now.
Offline
2-642
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
cipherModePrio3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
2-643
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

now.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
cipherModePrio4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
port".
Instance
Cell
2-644
SJ-20130408140048-016|2013-07-17(R1.0)
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value

now.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
cipherModePrio5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-645
SJ-20130408140048-016|2013-07-17(R1.0)
these three cipher modes fulfill this relation: "A5/1" > "A5/3" > "Not supDescription
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value

now.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-646
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
cipherModePrio6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value

now.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-647
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
cipherModePrio7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
port".
Instance
Cell
0: Not Support
1: A5/1
3: A5/3
4: A5/4
5: A5/5
6: A5/6
7: A5/7
Unit
N/A
Default Value
Default Value
Change Mode

now.
Offline
2-648
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.49 Preprocessing indication

Full Name
Preprocessing indication
Abbreviation
preprocess
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The measurement report contains the largest amount (message amount)
of Abis interface information. Preprocess of the measurement report
can be transferred to BTS to reduce the burden of Abis interface link.
After preprocess, BTS averages the measurement data of MS by its
own, and reports to BSC in a lower frequency.
Average reporting period can be two, three or four SACCH multi-frames
(480 ms). That is, the frequency decreases from the original twice per
second to once per two seconds, so the message amount of Abis
interface decreases. However, the decrease of message amount still
depends on if the message length before preprocess is the same as
that after preprocess. One disadvantage of preprocess is that the
handover control and power control are not in time, which increases the
possibility of disconnection rate. This parameter determines whether to
use preprocess or not and its period.
0: means not using preprocess
2: means using preprocess, and the period of averaging and reporting is
Description
of 2 SACCH multi-frames
2-649
SJ-20130408140048-016|2013-07-17(R1.0)

10: means using preprocess on TCH, and the period of averaging and
reporting is of 2 SACCH multi-frames
Instance
Cell
0:Not Support
2:Preprocess,2 SACCH block period
18: Preprocess on TCH,2 SACCH block period
Unit
N/A
Default Value
Default Value
Abis messages to reduce the amount and timeliness to meet a
compromise deal
It is suggested to disable all preprocesses.
If the default value is set as small, the handover frequency increases,
which helps improve handover success rate but affects calldrop rate
and coverage rate.

If the parameter is set as large, handover lagging increases, which
affects the caldrop rate and coverage rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-650
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.50 Fast average indication

Full Name
Fast average indication
Abbreviation
fastAvg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
During a call, the system may fail to perform the power control due to little
measurement data because the average calculation can only be started
when the amount of measurement data reaches a certain threshold.
For example, if the threshold for average calculation is 8, the system will
not calculate the average when the BSC only receives five measured
values. However, the BSC can calculate the average of the five
measured values by using the fast averaging function. Once some
measured values are already used for power control, they become
useless and cannot be used for power control any longer because using
old measured values may cause control errors. Therefore, the old
Description
measured values must be discarded.
Instance
Cell
1: Allowed
0: Not allowed
Unit
N/A
Default Value
Default Value
This function can be disabled for V3 base stations.
It is recommended to enable the fast averaging
function for SDR base stations to speed up the start of power control.
Change Mode
Offline
ZGO-04-02-001 Dynamic BTS Power Control
ZGO-04-02-002 Dynamic MS Power Control
Related features
ZGO-04-02-017 Downlink Rapid Power Control
Related Parameters
N/A
Relationship
N/A
2-651
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.51 Allowed FACCH call setup after emergency call

Full Name
Allowed FACCH call setup after emergency call
Abbreviation
facchCallEmgCall
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
BSC can allocate the suitable TCH channel when an MS attempts to access the network, and there is no SDCCH available in the cell. That is the
Description
so-called FACCH call establishment.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Enabling this switch can shorten the delay of call completion. However,

using TCH as signalling channel will cause the waste of radio resources.
It is only recommended to enable this function in scenarios having
requirements on the preference and completion delay of emergency
calls.
Change Mode
Offline
Related features
ZGB-01-03-001 Emergency Call Handling
Related Parameters
N/A
2-652
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.52 Allowed FACCH call setup when page respond

Full Name
Allowed FACCH call setup when paging respond
Abbreviation
facchCallPagResp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

It is recommended to disable this switch unless specially required.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-653
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.53 Allowed call setup on FACCH

Full Name
Allowed call setup on FACCH
Abbreviation
facchCallMo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-654
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.54 Allowed call reestablished on FACCH

Full Name
Allowed call reestablished on FACCH
Abbreviation
facchCallCallReEst
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-655
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.55 Minimal resource threshold

Full Name
Minimal resource threshold
Abbreviation
resourceThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the minimal resource threshold allowed by the
Description
cell. It is used to calculate dynamic cell priority.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
experience value
The lower limit of resources should be larger

than 10 due to the designation limitations of logarithm table. It

is recommended not to modify this parameter value.If the threshold
is adjusted, the dynamic priority changes linearly, which is relatively
complicated to compute.
Change Mode
Offline
Related features
ZGO-02-02-002 Dynamic Handover Priority Algorithm
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-656
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.56 PCH load indication period

Full Name
PCH load indication period
Abbreviation
ccchLoadIndPrd
Managed Object
3GPP Name
CCCH Load Indication Period
3GPP Reference
3GPP TS 12.12
According to GSM specifications, within a PCH(or RACH) overload measurement period, when the PCH(or RACH) load of BTS exceeds the overload threshold specified on O&M, BTS will periodically send the CCCH
LOAD INDICATION message to BSC till the PCH(or RACH) load does
Description
not exceed the threshold.
Instance
Cell
1..255
Unit
Default Value
Default Value
Timely reporting overload and overload recovery
It is recommended not to adjust the configuration
of this parameter.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
2-657
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.57 CCCH load indication (RACH)

Full Name
CCCH load indication (RACH)
Abbreviation
CcchLoadINDThs_0
Managed Object
3GPP Name
CCCH Load Threshold
3GPP Reference
3GPP TS 12.12
When load degree in RACH channel for BTS exceeds this threshold, BTS
sends CCCH LOAD INDICATION message periodically to iBSC until load
Description
degree in RACH channel doesn't exceed this threshold value.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
Empirical values for high load

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-658
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.58 CCCH load indication (PCH)

Full Name
CCCH load indication (PCH)
Abbreviation
CcchLoadINDThs_1
Managed Object
3GPP Name
CCCH Load Threshold
3GPP Reference
3GPP TS 12.12
When load degree in PCH channel for BTS exceeds this threshold, BTS
sends CCCH LOAD INDICATION message periodically to iBSC until load
Description
degree in PCH channel doesn't exceed this threshold value.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
Empirical values for high load

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-659
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17.59 Interference average period

Full Name
Interference average period
Abbreviation
interfAvgPrd
Managed Object
3GPP Name
INTAVE
3GPP Reference
3GPP TS45.008
BTS needs to measure interference on the unallocated traffic channels.
BTS calculates the average of recent interference values on periodic basis
and converts it into corresponding interference band information. BTS
then, transfers to BSC in the RF RESOURCE INDICATION message to
consider it as a factor in channel allocation strategy. This parameter is
Description
one of the BTS configuration parameters.
Instance
Cell
1..31
Unit
N/A
Default Value
31
Default Value
Generally, a long period can be set because
the fluctuation of uplink interference is not great.

If the parameter value is too small, radio resource information will be

frequently reported, which increases the load of the BSC.

If the parameter value is too large, the change of radio resources cannot
be reflected in time due to the long update period of radio resource
report.
Change Mode
Offline
Related features
ZGO-03-02-001 Idle Channel Measurement
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-660
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.60 Interference Band Boundary

Full Name
Interference Band Boundary
Abbreviation
interfBoundary
Managed Object
3GPP Name
[0,X1,X2,X3,X4,X5]
3GPP Reference
3GPP TS45.008
BTS needs to measure interference on the unallocated traffic channels.
BTS calculates the average of recent interference values on periodic
basis and converts it into corresponding interference band information.
BTS then, transfers to BSC in the RF RESOURCE INDICATION
message to consider it as a factor in channel allocation strategy.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. One of them represents infinity and the other
represents negative infinity. This parameter, describing
the remaining four boundaries, is one of the BTS configuration
parameters.
Description
Generally, -85 dBm ~ -115 dBm is used for interference boundaries 1 ~ 4.
Instance
Cell
0..63
Unit
N/A
Default Value
[0,10,15,20,25,63]
Default Value
Set the boundaries of each interference band

according to the interference range generally measured in the actual
network.
If two boundaries are too close, the conversion
of interference band will be too sensitive on the change of interference
level. If the difference between two boundaries is too great, the

change of interference level cannot be reflected in time.
Change Mode
Offline
2-661
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-03-02-001 Idle Channel Measurement
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.61 MAX resending times for physical information

Full Name
MAX resending times for physical information
Abbreviation
ny1
Managed Object
3GPP Name
Ny1
3GPP Reference
3GPP TS44.018
During a non-synchronous switch, the BTS sends the time advance
threshold to the MS. After sending an RIL3_RR PHYSICAL INFORMATION information, the BTS starts the timer T3105. If the second-layer
frame or TCH frame cannot be decoded when the timer is timed out,
the BTS will resend the RIL3_RR PHYSICAL INFORMATION message
and then start T3105 again. the parameter NY1 (the Max Number of
Repetition) determines the number of times of RIL3_RR PHYSICAL
Description
INFORMATION sending.
Instance
Cell
5..35
Unit
N/A
Default Value
20
Default Value
the maximum delay of message interaction at the radio interface.
2-662
SJ-20130408140048-016|2013-07-17(R1.0)
A too small parameter value will reduce the retransmission times and
thus decrease the transmission success rate.
A too large parameter value may cause the waste of radio resources.
The parameter value can be appropriately increased in the case of

slow handover or low handover success rate caused by bad clock or
transmission.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.62 RACH load indication period

Full Name
RACH load indication period
Abbreviation
overloadPrd
Managed Object
3GPP Name
Overload Period
3GPP Reference
3GPP TS 12.12
According to GSM specifications, when the Access Burst level exceeds
the predefined access level busy threshold (RACHBusyThs), the Access
Burst is considered as busy burst. During the period of RACH overload
measurement, if the ratio of the number of Busy Bursts to all Access
Bursts exceeds the RACH overload threshold set by O&M, then the CCCH
Description
LOAD INDICATION message is reported.
Instance
Cell
1..255
Unit
s
2-663
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Timely reporting overload and overload recovery

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.63 Average bursts count surveyed by RACH

Full Name
Average bursts count surveyed by RACH
Abbreviation
avgSlots
Managed Object
3GPP Name
RACH Load Averaging Slots
3GPP Reference
3GPP TS 12.12
This parameter indicates the number of bursts (AvgSlots) on RACH. If the
receiving signal level of this parameter burst is higher than RachBusyThs,
the RACH channel overloads. This parameter is one of the parameters
Description
used by BTS.
Instance
Cell
0..100
Unit
N/A
Default Value
60
2-664
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
EXP

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.64 RACH receiving signal level threshold for busy burst

Full Name
RACH receiving signal level threshold for busy burst
Abbreviation
rachBusyThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
RACH receiving signal level threshold for busy burst is the threshold for
receiving signal level in RACH bursts. If the value is exceeded (that is less
than RACH Receiving signal level threshold for busy burst dBm), system
Description
considers that as a busy RACH.
Instance
Cell
0..63
Unit
N/A
Default Value
63
2-665
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

If the value is set as too low, BTS is more likely to report the overloading
information to the BSC, so the default value is set as a relatively high
value.
If this parameter is set as too small, BTS is likely to judge RACH timeslot
as busy, and the overloading message is prone to report to the BSC. It is
recommended to keep the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.65 Times of N200 for SDCCH

Full Name
Times of N200 for SDCCH
Abbreviation
N200forSDCCH
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 is the numbers of retransmission which is on kinds of control channel in LAPDM protocol of BTS. This parameter describe the times of N200
Description
for SDCCH.
Instance
Cell
1..7
Unit
N/A
Default Value
2-666
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The default value is recommended by the protocol.

If this parameter is set as large, the number of retransmission
times increases, as a result of successful retransmission as well as
too-long-time channel occupation.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.66 Times of N200 for FACCH_F

Full Name
Times of N200 for FACCH_F
Abbreviation
N200forFACCHF
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
Description
for FACCH_F.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value

2-667
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.67 Times of N200 for FACCH_H

Full Name
Times of N200 for FACCH_H
Abbreviation
N200forFACCHH
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
Description
for FACCH_H.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value
2-668
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.68 Times of N200 for SACCH

Full Name
Times of N200 for SACCH
Abbreviation
N200forSACCH
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
Description
for SACCH.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value
2-669
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.69 Times of N200 for establish

Full Name
Times of N200 for establish
Abbreviation
N200forEstablish
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
Description
for establish.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value
2-670
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.70 Times of N200 for Release

Full Name
Times of N200 for Release
Abbreviation
N200forRelease
Managed Object
3GPP Name
N200
3GPP Reference
3GPP TS44.006
Description
for Release.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value
2-671
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.17.71 Interval of SDCCH re-sending PHY info message

Full Name
Interval of SDCCH re-sending PHY info message
Abbreviation
t3105d
Managed Object
3GPP Name
T3105
3GPP Reference
3GPP TS44.018
It is the interval for resending the RIL3_RR PHYSICAL INFOMATION
message during an asynchronous handover of SDCCH channel. This
timer is one of the configuration parameters of BTS.
Timer Start: It starts when network sends the RIL3_RR PHYSICAL
INFORMATION message.
Timer Stop: It stops when the network receives a layer-2 frame that can
be correctly decoded or receives the HANDOVER FAILURE message
from the former channel.
Overtime Action: If the timer is overtime, RIL3_RR PHYSICAL
Description
INFORMATION message will be redelivered.
Instance
Cell
1..67
2-672
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
28
Default Value
the minimum delay of message interaction at the radio interface.

Physical information is sent over FACCH, which occurs every four TDMA
frames. That is, the physical information is sent every 18 ms. Therefore,
20 ms is recommended as an appropriate minimum value.
When adjusting the parameter value, take the following into
consideration: a too short interval may cause the transmission of too

much redundant information;
a too long interval may reduce the access speed of the MS when the
radio environment is bad.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.72 Interval of TCH re-sending PHY info message

Full Name
Interval of TCH re-sending PHY info message
Abbreviation
t3105f
Managed Object
3GPP Name
T3105
3GPP Reference
3GPP TS44.018
2-673
SJ-20130408140048-016|2013-07-17(R1.0)
It is the interval for resending the RIL3_RR PHYSICAL INFOMATION

message during an asynchronous handover of TCH channel. This timer
is one of the configuration parameters of BTS.
Timer Start: It starts when network sends the RIL3_RR PHYSICAL
INFORMATION message.
Timer Stop: It stops when the network receives a layer-2 frame that can
be correctly decoded or receives the HANDOVER FAILURE message
from the former channel.
Overtime Action: If the timer is overtime, RIL3_RR PHYSICAL
Description
INFORMATION message will be redelivered.
Instance
Cell
1..32
Unit
N/A
Default Value
10
Default Value
the minimum delay of message interaction at the radio interface.

Physical information is sent over FACCH, which occurs every four TDMA
frames. That is, the physical information is sent every 18 ms. Therefore,
20 ms is recommended as an appropriate minimum value.
When adjusting the parameter value, take the following into
consideration: a too short interval may cause the transmission of too

much redundant information;
a too long interval may reduce the access speed of the MS when the
radio environment is bad.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-674
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.73 TA Max
Full Name
TA Max
Abbreviation
taMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the maximum TA supported by extended carrier frequency. It defines the cell coverage capability. The users with
Description
values that exceed TaMax cannot access or will be dropped.
Instance
Cell
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
Default Value
{cellType==4}219
Default Value
Common cell by default

The cell coverage capability is configured
based on the cell type (extended cell or not). The parameter is set
to 63 fro common cells and 219 for extended cells.
Change Mode
Offline
Related features
ZGO-04-01-001 Extended Cell Coverage
Related Parameters
CellType
DistanceThs
When CellType is selected as the non-extended cell, the value is 0~63.
Relationship
When CellType is selected as the extended cell, the value is 0~219.

DistanceThs during handover control should not be higher than the TA
Max of the cell.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
2-675
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.74 TA allowed
Full Name
TA allowed
Abbreviation
taAllowed
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum TA that is allowed to access the
cell. If the delay time period requested by the channel exceeds the al-
Description
lowed range of TA, user access is not allowed.
Instance
Cell
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
{cellType==0}63,
{cellType==1}63,
{cellType==2}63,
{cellType==3}63,
Default Value
{cellType==4}219
Default Value
Common cell by default
TaAllowed can be reduced to control the access
coverage.
Change Mode
Offline
Related features
N/A
Related Parameters
AttributeModeInd
2-676
SJ-20130408140048-016|2013-07-17(R1.0)
The value of "Cell Type" has influence on the value range and default
Relationship
value of this parameter.

The parameter takes effect only when TLV is supported.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.75 Allow SOLSA MS to access

Full Name
Allow SOLSA MS to access
Abbreviation
exc_Acc
Managed Object
3GPP Name
EXC_ACC
3GPP Reference
N/A
System broadcasts this parameter to MS in SI4, SI6, and SI7 messages.
In addition, the parameter information is available in PSI3 and Psi3bis
messages of local and neighboring cells. This parameter is used by net-
Description
work to prevent MS from residing in the cell.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
normaly the non-SoLSA MS is not forbidden to access
If MSs with SoLSA access authorization are
expected to access a cell, set this parameter "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-677
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.76 Repeated ACCH support

Full Name
Repeated ACCH support
Abbreviation
repeatACCH
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter determines whether to use the FACCH/SACCH retrans-
Description
mission function.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
Are new features, maintaining the same as before.

It is recommended to enable this function after
AMR is enabled, so as to improve the set-up success rate, whilst
currently
few mobile phones support the repeat SACCH.
Change Mode
Offline
Related features
ZGO-04-02-009 Repeated FACCH/SACCH
Related Parameters
N/A
Relationship
N/A
2-678
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.77 Frequency offset correct support

Full Name
Frequency offset correct support
Abbreviation
freqOffsetCorect
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the frequency offset correction is supported. This function is applied on the high-speed railway and GSM-R
Description
situations, which can raise the uplink receiving performance.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
In most cases, frequency offset correction
is not needed because most MSs does not move fast.
In the coverage area of high-speed railway
and expressway, this parameter can be set to "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-679
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.78 Maximum power on handover command support

Full Name
Maximum power on handover command support
Abbreviation
hoCmdMaxPwr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
It indicates whether handover commands are issued in the highest trans-
Description
mission power.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
There will be some interference if handover
commands are issued in the highest transmission power.

Some power interference will be brought up if handover commands are

issued in the highest transmission power. This function can be enabled

in the coverage area with weak signals. It can improve the success rate
of handover commands received by MS.
Change Mode
Offline
Related features
ZGO-02-02-019 Handover Command Power Boost
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-680
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.79 Coefficient of Bvc bucket size

Full Name
Coefficient of Bvc bucket size
Abbreviation
rachAccessMin
Managed Object
3GPP Name
None
3GPP Reference
N/A
MS uplink RACH access to the minimum threshold level, when the BTS
receives channel request, will measure the reception level, when the re-
Description
ception level is less than the threshold, discard the access.
Instance
Cell
90..125
Unit
N/A
Default Value
125
Default Value
The sensitivity range, the default is not limited

The default value is recommended. If this index is increased, the
coverage area will be reduced and the success rate of paging and
handover will be lowered. However, the accessibility and the drop rate
will be improved.
Change Mode
Offline
Related features
N/A
Related Parameters
AttributeModeInd
Relationship
The TLV parameter must be enabled to validate

this functional parameter.
Related Interfaces
AbisUm
Impact on Equipment
Impact on service
2-681
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.80 TA MIN
Full Name
TA MIN
Abbreviation
taMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
It indicates the minimum TA accessing the cell. In homocentric circle coverage, this parameter is used with TaAllowed to limit the access of outer
Description
circle cells.
Instance
Cell
{cellType==0}[0..63],
{cellType==1}[0..63],
{cellType==2}[0..63],
{cellType==3}[0..63],
{cellType==4}[0..219]
Unit
N/A
Default Value
Default Value
The coverage area is not a homocentric circle
by default and all users within the coverage have access authorities.
In homocentric circle coverage, TaMin can be
increased to users near the certer point to use the outer circle resources.
Change Mode
Offline
Related features
Related Parameters
AttributeModeInd
The value of "Cell Type" has influence on the value range and default
Relationship
value of this parameter.

The parameter takes effect only when TLV is supported.
Related Interfaces
Abis
2-682
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.81 8PSK modulating power attenuation level

Full Name
8PSK modulating power attenuation level
Abbreviation
tn7LowerLevel
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the 8PSK modulating power attenuation level. If
BCCH carrier uses the channel with 8PSK modulation, the BCCH carrier
Description
is guaranteed to be sent at a constant power by setting this parameter.
Instance
Cell
0..50
Unit
N/A
Default Value
Default Value
The default is not adjusted

Currently, the system does not support this function, and the modulation
power of BCCH Ts is reduced by 2 dB through the usage of 8PSK.
This parameter is valid until the TLV format is supported.
Change Mode
Offline
Related features
N/A
Related Parameters
AttributeModeInd
Relationship
This parameter is valid until the TLV parameter

is enabled.
Related Interfaces
Um
Impact on Equipment
0
2-683
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.82 Access class parameter config select

Full Name
Access class parameter config select
Abbreviation
accConfigSelect
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Switch for access control class SIM cards.
Description
This switch controls one cell.
Instance
Cell
0:Disable the user access control function
1:Enable the first ACC configuration data as user access control
parameters
2:Enable the second ACC configuration data as user access control
parameters
3:Enable the third ACC configuration data as user access control
parameters
4:Enable the fourth ACC configuration data as user access control
parameters
Unit
N/A
Default Value
Default Value
In most cases no manual flow control is needed.
The switch is turned off by default.
"Manual Flow Control" is applied, so the control
parameter can be adjust according to the traffic load.
Change Mode
Offline
Related features
N/A
2-684
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
UseCellAcc
AccessControl
When the user access control is enabled manually, the automatic flow
Relationship
control will be stopped.

When the settings of BSC-level manual access control switch parameter
is different, the system will use the settings of this parameter.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.83 Cell access control support

Full Name
Cell access control support
Abbreviation
useCellAcc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The user access control parameter categorized on the basis of SIM uses
Description
cell-level parameters or BSC-level parameters.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
The settings can vary in different cells.
If the same strategy is applied in BSC, this
parameter can be set "No".
Change Mode
Offline
Related features
N/A
2-685
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
AccessControl,
AccessControl
When this parameter is set to 0, the BSC level AccessControl parameter
Relationship
is valid;
When this parameter is set to 1, the cell level AccessControl parameter
is valid;
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.84 Support NCell of Channel Release

Full Name
Support NCell of Channel Release
Abbreviation
NCellIndOfChlRel
Managed Object
3GPP Name
Cell selection indicator after release of all TCH and SDCCH
3GPP Reference
3GPP TS 44.018
3G dual-mode terminals will switch back to 3G network as soon as
possible when the GSM call ends. This parameter sets the neighbor cell
in a releasing message. For details, refer to the following:
0: Channel Relaese without Neighbour Cell
1: Channel Relaese with UTRAN Neighbour Cell
Description
2: Channel Relaese with E-UTRAN Neighbour Cell
Instance
Cell
0: Channel Release without Neighbour Cell
1: Channel Release with UTRAN Neighbour Cell
2: Channel Release with E-UTRAN Neighbour Cell
Unit
N/A
Default Value
2-686
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Enable or disable this function according to
the requirements of the local operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
Update
2.17.85 Strategy for E-Utran Neighbour Select When Release

Full Name
Strategy for E-Utran Neighbour Select When Release
Abbreviation
RelEUtranStrategy
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the policy for filling a channel release message
with the information of an E-UTRAN neighbor cell so that an MS can
quickly reselect the E-UTRAN cell after call completion.
The parameter value 0 indicates that the BSC selects the E-UTRAN
neighbor cell with the best signal quality from all measured E-UTRAN
neighbor cells to fill the channel release message.
The parameter value 1 indicates that the BSC fills the channel release
message with the configured E-UTRAN neighbor cell.
The parameter value 2 indicates that the BSC prefers to fill the channel
release message with the measured E-UTRAN neighbor cell with the
best signal quality. If no measured E-UTRAN neighbor cell is available,
Description
the BSC fills the message with the configured E-UTRAN neighbor cell.
2-687
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
It is more precise to determine E_UTRAN handover neighbor cells
according to the measurement report.

Generally, set this parameter to 0. If MSs are not expected to measure
E-Utran neighbor cells and thus there are more time for measuring
GSM/UTRAN cells, set this parameter to 1. In this case, E-Utran

neighbor cell selection is not precise.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A
Parameter Modifying
Detail
New
2.17.86 E-Utran FDD and TDD Prio When Release

Full Name
E-Utran FDD and TDD Prio When Release
Abbreviation
RelEUtranPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether an MS prefers to select an FDD neighbor cell or a TDD neighbor cell when an E-UTRAN neighbor cell is filled
to the channel release message to allow the MS to quickly reselect an
Description
E-UTRAN cell after call completion.
2-688
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..3
Unit
N/A
Default Value
0
This parameter can be set to the following values:
0: E-Utran TDD neighbor cell preferred
Default Value
1: E-Utran FDD neighbor cell preferred

2: E-Utran TDD neighbor cell only
3: E-Utran FDD neighbor cell only
Set the parameter based on the network condition and telecom
operator's requirement.
Set this parameter based on the network condition and telecom
operator's requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A
Parameter Modifying
Detail
New
2.17.87 Support Emergency call preemption

Full Name
Support Emergency call preemption
Abbreviation
EmergCallPreempt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-689
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to forcibly release a subscriber when

no resource is available for an emergency call. If no resource is available
for an emergency call, there are three cases: 1) If a proper channel is
not available during initial access, it is required to add a handling flow for
forcible release, so as to access an emergency call. 2) If a proper channel
is not available during assignment, it is required to modify the handling
flow for forcible release of an emergency call. 3) If no radio resource is
available during handover, it is required to forcibly release a subscriber to
access the emergency call. The value 1 indicates that the system support
forcibly releasing a subscriber in case of an emergency call. The value 0
indicates that the system does not support forcibly releasing a subscriber
Description
in case of an emergency call.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
An emergency call is prior to be accessed.
Enable or disable this function according to
the requirements of the local operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
2-690
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.88 BA show
Full Name
BA show
Abbreviation
bcchBaInd
Managed Object
3GPP Name
BA ind
3GPP Reference
3GPP TS 44.018
This parameter refers to BA indication of BCCH.
Adjacent cell list can be broadcast on BCCH and transferred on SACCH.
The adjacent cell list transferred on BCCH can be different from that
on SACCH. When MS reports the measurement data of adjacent cell,
either BCCH adjacent cell list or SACCH adjacent cell list will be referred.
Therefore, to know which adjacent cell list is referred by MS, a BA
indication is added when transferring adjacent cell list on BCCH and
SACCH. When reporting the measurement result, MS notifies the
network side about the corresponding BA indication of the referred
adjacent
cell list. As a result, the network side recognizes which adjacent cell
list this MS uses.
This parameter describes the BS indication value when the adjacent
cell list being transferred on BCCH. In the case of transferring adjacent
cell list on SACCH, the BA indication value used is the reverse of the
parameter.
0: BA Show (BcchBaInd) value on BCCH (System message 2, 2bis,
2ter) is 0; BA Show (BcchBaInd) value on SACCH (System message 5,
5bis, 5ter) is 1.
1: BA Show (BcchBaInd) value on BCCH (System message 2, 2bis,
2ter) is 1; BA Show (BcchBaInd) value on SACCH (System message 5,
Description
5bis, 5ter) is 0.
Instance
Cell
0: BA_IND is 0 on BCCH, 1 on SACCH
1: BA_IND is 1 on BCCH, 0 on SACCH
Unit
N/A
Default Value
Default Value
No reason

Change Mode
Offline
Related features
N/A
2-691
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.89 Support CS paging prefer PS Assignment

Full Name
Support CS paging prefer PS Assignment
Abbreviation
CsPagingPrefer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the CS paging is preferred to the PS
Description
assignment.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The priorities are the same by default.

Set this parameter based on the customer's requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-692
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.90 Channel Select Strategy

Full Name
Channel Select Strategy
Abbreviation
chanSelectstrategy
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides the channel allocation mode of each kind of high-
Description
priority users.
Instance
Cell
0:According to channel select order of MSC, when prefer TCHF and cell
congest\(allocation threshold of HR is exceeded\)change to prefer TCHH
1:Prefer TCHF, when cell congest \(allocation threshold of HR is
exceeded\),change to prefer TCHH
2:Prefer TCHH
3:TCHF only, not allocate TCHH
4:TCHH only, not allocate TCHF
5:According to channel select order of MSC, not consider whether cell
congest
6:According to channel select order of MSC, when prefer TCHF and
cell congest \(allocation threshold of HR is exceeded\) change to prefer
TCHH if AMR-HR supported
7:Prefer TCHF, not consider whether cell congest
8:Prefer TCHF, when cell congest \(allocation threshold of HR is
exceeded\),change to prefer TCHH if AMR-HR supported
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
2-693
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Generally, in accordance with the channel allocation

strategy provided by MSC, TCHH is preferentially allocated only in
the case of channel congestion.
Generally, the parameter is configured for
higher-priority users. It is set to be easily allocated with TCHH
instead of only TCHF or only TCHH.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
N/A
Relationship
N/A
Related Interfaces
A interface
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.91 EMLPP channel reserved rate

Full Name
EMLPP channel reserved rate
Abbreviation
emlppThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When using high priority user to access service, that is, EMLPP service,
the system may configure certain reserved channels for the users with
high priority to access CS service. The reserved channels equal to the
reserved rate of EMLPP multiplying the minimum value of available chan-
Description
nels (including TCH and PD) and idle TCHP channels.
Instance
Cell
0..100
Unit
2-694
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Feature parameter, not reserved by default.

The parameter increase, high priority user can be
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.92 Use cell EMLPP Threshold

Full Name
Use cell EMLPP Threshold
Abbreviation
useCellEmlppThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines whether to use eMLPPThs. If yes, you shall select
Description
cell property, otherwise to select BSC property.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Use the BSC parameter normally

2-695
SJ-20130408140048-016|2013-07-17(R1.0)
This switch can be enabled when one cell needs
to be configured with the EMLPP parameter independently.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.93 Dynamic HR support indication

Full Name
Dynamic HR support indication
Abbreviation
DynaHREnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether the BSC supports dynamic HR. The dynamic HR channel allocation function enables the network to allocate
full-rate or half-rate channels to MSs according to the traffic in the cell
when it allocate channels for the MSs. Allocating half-rate channels when
the channels in the cell are likely to be congested minimizes the duration
Description
of possible congestions in peak hours.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
2-696
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
When the user number is reach or exceed the cell capability, the switch
can be open to extend the cell capability.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.94 Threshold of AMR HR

Full Name
Threshold of AMR HR
Abbreviation
amrHrThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When busy timeslot/general timeslot >= AmrHRThs/100, and carrier and
cell support AMR, subsequent service prefers AMR voice rate.
This threshold value can be configured on BSC and BTS, when "User
cell dynamic HR parameter" (UseCellDynHRPara) is yes, AmrHRThs
value configured by cell will be used, otherwise AmrHRThs configured
Description
by BSC is used.
Instance
Cell
0..100
Unit
Default Value
50
2-697
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
AmrHRThs need to less-than HRThs, so that the default value is 50%

When users expect the ratio of the AMRHR chjannel allocated in the
cell ito be increased, reduce this parameter value. When users expect
the ratio of the AMRHR channel allocated in the cell ito be decreased,
increase this parameter value.
Change Mode
Offline
ZGO-03-02-006--Independent Threshold for Dynamic AMR HR/FR Con-
Related features
version
Related Parameters
hrThs
HRThs is not less than AmrHRThs. If the parameter
Relationship
UseCellDynHRPara is enabled, the threshold of the cell-level dynamic

AMR HR is valid. Otherwise, the threshold of the BSC-level AMRHR is
valid.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.95 Threshold for FR to HR

Full Name
Threshold for FR to HR
Abbreviation
hrThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When BSC and cell enables dynamic HR functions, and percentage of
TCH/F channel used in the cell (TCH/F channels occupied in the cell / all
available TCH channels in the cell (including IDLE and BUSY)) exceeds
Description
this threshold, convert TCH/F -> TCH/H.
Instance
Cell
2-698
SJ-20130408140048-016|2013-07-17(R1.0)
1..100
Unit
Default Value
60
Default Value
When busy timeslot/general timeslot result is reach to 60%, we think the
cell is busy, The cell need to be FR TO HR to expend cell capability.
When users want to increase The HR channel ration of a cell, reduce
this threshold appropriately.
Change Mode
Offline
Related features
Related Parameters
amrHrThs
HRThs is not less than AmrHRThs. If the parameter
Relationship
UseCellDynHRPara is enabled, the threshold of the cell-level dynamic

AMR HR is valid. Otherwise, the threshold of the BSC-level AMRHR is
valid.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.96 Dynamic HR channel allocation algorithm

Full Name
Dynamic HR channel allocation algorithm
Abbreviation
DhrAlgorithm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-699
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the algorithm that calculates the busy level
required for dynamic HR channel allocation.
If a dynamic channel is configured in a cell, this channel is converted
into a dynamic PS channel when it is used for PS traffic. To consider
both CS and PS traffic, the cell deems that the dynamic PS channel
is busy, and allocates a dynamic HR channel before preempting the
dynamic PS channel when the calculated busy level is high. To consider
only CS traffic, the cell preempts the dynamic PS channel first and then
allocates an HR channel when the calculated busy level is high and no
Description
enough FR channel is available.
Instance
Cell
0: CS and PS
1: Only CS
Unit
N/A
Default Value
Default Value
Usually, the system considers that a dynamic
channel is occupied when being used for the PS service.

The value is 1 (only for CS services) when users expect the dynamic
HR channel is enabled to improve the full-rate users proportion after
CS services preempt PS service channel, and think that PS service
performamce can be eradicated.

The value is 0 (for CS and PS services) with regard to CS service
capacity and PS service performance of the cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-700
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.97 HR channel fragment finishing support

Full Name
HR channel fragment finishing support
Abbreviation
hrDfragSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is a switch to support the HR channel defragmentation
function and can be configured on both BSCs and cells. The HR channel
defragmentation function is enabled only when both BSC- and cell-level
switches are enabled and the proportion of the idle TCH/Fs in these cells is
not more than the threshold proportion of the TCH/Fs to the total available
Description
service channels in the cell where the defragmentation is enabled.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

This parameter can increase the number of full-rate
channels and improve the voice quality when a cell that applies dynamic
half-rate enable the HR fragment cleaning. This parameter can be
enabled
when needed. The BSC global parameter needs to be turned on, and the
number of handover within a cell will increase.
Change Mode
Offline
Related features
Related Parameters
N/A
The HR fragment cleaning function can be enabled only when the
following three parameters have been enabled: BSC HRDfragSupport,
Relationship
BSC HoIntraEnable and HRDfragSupport. The ratio of idle TCH/F

channel to all available service channels is the starting threshold of HR
fragment cleaning function.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-701
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.98 Busy threshold for HR defrag

Full Name
Busy threshold for HR defrag
Abbreviation
hrDefragBusyThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The defragmentation of HR channels can be started only when the cell
busy level is less than this busy threshold. The cell busy level is the proportion of busy channels (including TCH/Hs, TCH/Fs, and PDTCHs) to all
available channels in the cell. It is calculated when HR channel defrag-
Description
mentation is required due to release of HR MSs.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
HR fragment cleaning up will make the channel busier. We advise not to

do HR defrag when more then 80% channel have been used, because
there are many service in the cell at this time.
This parameter defines the proportion of busy
channels in a cell. If the threshold is increased, HR fragment cleaning

up will start conducted when the cell is busy, and there will be more
inner-cell handovers caused by HR fragment cleaning up. If the threshold
is decreased, HR fragment cleaning up will start when the cell is
not busy, and there will be less inner-cell handovers caused by HR
fragment cleaning up.
Change Mode
Offline
Related features
Related Parameters
hrDfragSupport
Relationship
N/A
2-702
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.99 Idle FR threshold For HR defrag

Full Name
Idle FR threshold For HR defrag
Abbreviation
hrDefragIdleFRThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the proportion between the number of idle TCH/F channels in cell
and the the number of all available service channels in cell is smaller than
Description
this threshold value, the defragment is started.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
The default value is a low proportion threshold.

This parameter defines that the proportion
of idle TCH/F channels are the start threshold for HR fragment cleaning
up. If the threshold is increased, HR fragment cleaning up will be
started when there are many idle TCH/F channels, and there will be
more inner-cell handovers caused by HR fragment cleaning up. If the

threshold is decreased, HR fragment cleaning up will be started when
there are less idle TCH/F channels, and there will be less inner-cell
handovers caused by HR fragment cleaning up.
Change Mode
Offline
Related features
2-703
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
hrDfragSupport
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.100 HR channel percentage threshold

Full Name
HR channel percentage threshold
Abbreviation
hrTsPercentage
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When HR timeslot in the cell / general timeslot in the cell <
HRTsPercentage/100, the cell can generate new HR channel.
This parameter can be configured on BSC and BTS. When
UseCellDynHRPara is YES, use the parameter of cell. When
UseCellDynHRPara is No, use the parameter of BSC. the cell can
Description
generate new HR channel.
Instance
Cell
0..100
Unit
Default Value
50
Default Value
The default start threshold for dynamic HR
exceeds 50%. Too many HR utility should be avoided.

Change Mode
The HR time slot proportion is set to control

the utility of HR channels. The proportion of the HR channels that
can be used becomes higher if the parameter is set higher.
Offline
2-704
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-01-01-001 Half Rate
Related Parameters
HRTsPercentage
UseCellDynHRPara
This parameter can be configured on both BSC and BTS. When
Relationship
UseCellDynHRPar is set to Yes, HRTsPercentag of the cell is used.

When UseCellDynHRPar is set to No, HRTsPercenta of BSC is used.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.101 If support allocating channel by TA

Full Name
If support allocating channel by TA
Abbreviation
AllocChlByTA
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether channels in a cell are allocated for
Description
BCCH and non-BCCH carriers according to the TA value.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value

Enable this switch according to operator requirements.
Change Mode
Offline
2-705
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.102 The TA threshold of allocating channel in BCCH

Full Name
The TA threshold of allocating channel in BCCH
Abbreviation
TaThsOfBCCH
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the TA threshold when the channels on the
BCCH carrier are allocated.
If the TA value is lower than or equal to this threshold, the system is prior
to allocate the channels on the BCCH carrier. Otherwise, the system is
Description
prior to allocate the channels on the non-BCCH carrier.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
By default, the subscribers near the BTS will

be allocated on the BCCH carrier. During actual application, adjust
this value according to the range of cell coverage.
This parameter is relevant to cell coverage.
For metropolitan areas, this parameter is configured relatively small.
For suburban areas with wide cell coverage, this parameter is configured
relatively large.
2-706
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
AllocChlByTA
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.103 Support dynamic channel move

Full Name
Support dynamic channel move
Abbreviation
DynChMove
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
A dynamic channel can be used for both the voice service and the PS
data service. For the cells configured with static TCH channels and dynamic channels, the CS voice service is already prior to use static TCH
channels but occupies dynamic channels as the voice service increases.
This parameter determines whether to support the function of channel
adjustment. This function releases the CS service that occupies dynamic
Description
PDCH channels and switches the service to the static TCH channel.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
2-707
SJ-20130408140048-016|2013-07-17(R1.0)
For the cells configured with both dynamic

channels and static channels, it is recommended that this function
be enabled. After that, the number of channels available for the PS

service increases and the handover times in the cell increase.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.104 Idle static TCH threshold for dynamic channel move

Full Name
Idle static TCH threshold for dynamic channel move
Abbreviation
IdleTCHForDChMove
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the proportion of idle static TCH channels in a cell to all the available service channels is higher than this threshold, the CS service that occupies
Description
the dynamic PDCH channel can be switched to the static TCH channel.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
If this threshold is configured too low, it

is easier to migrate the CS service on the dynamic channel to the
static channel.
2-708
SJ-20130408140048-016|2013-07-17(R1.0)

This parameter determines the start threshold

of dynamic channel migration. Adjusting this threshold will increase
or decrease the frequency of dynamic channel migration accordingly.
Change Mode
Offline
Related features
N/A
Related Parameters
DynChMove
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.105 UpLink Optimize Method for Assignment or Intracell

Handover
Full Name
UpLink Optimize Method for Assignment or Intracell Handover
Abbreviation
PwrOptAssIntraHoUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the uplink power optimization mode in the
Description
case of assignment and inner-cell handover.
Instance
Cell
0: No Optimize
1: Inherit Power Before Handover
2: Optimize According To Target Level
Unit
N/A
Default Value
Default Value
Using the maximum power has certain benefits.

2-709
SJ-20130408140048-016|2013-07-17(R1.0)
When the initial power needs to be optimized for reducing interference,

users can select the power of the original channel , or the target level to
optimize. When the power control cannot be timely performed on the

original channel, the target level can be selected to optimize.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.106 DownLink Optimize Method for Assignment or Intracell

Handover
Full Name
DownLink Optimize Method for Assignment or Intracell Handover
Abbreviation
PwrOptAssIntraHoDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the downlink power optimization mode in the
Description
case of assignment and inner-cell handover.
Instance
Cell
0: No Optimize
Unit
N/A
Default Value
2-710
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

To reduce interference by optimizing the
initial power or improve the success rate of power admission by using
the function of dynamic power sharing, it is required to inherit the

power of the original channel or optimize the power by using the target
level.
The power of the original channel is used because the
power control has been implemented on the original channel. If the
original channel does not implement power control in time, it is required
to optimize the power by using the target level.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.107 UpLink Optimize Method for Intercell Handover

Full Name
UpLink Optimize Method for Intercell Handover
Abbreviation
PwrOptInterHoUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
case of inter-cell handover.
Instance
Cell
2-711
SJ-20130408140048-016|2013-07-17(R1.0)
0: No Optimize
Unit
N/A
Default Value
Default Value

When the initial power needs to be optimized for reducing interference,
the power of the original channel , or the target level can be selected to
optimize, which is determined by the operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.108 DownLink Optimize Method for Intercell Handover

Full Name
DownLink Optimize Method for Intercell Handover
Abbreviation
PwrOptInterHoDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
case of inter-cell handover.
Instance
Cell
2-712
SJ-20130408140048-016|2013-07-17(R1.0)
0: No Optimize
Unit
N/A
Default Value
Default Value

When the interference should be reduced through optimizing the initial
power, or the dynamic power sharing function is used to improve the
success rate of power access, the target level can be selected to

optimize.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.109 UpLink Optimize Method for Immediate Assignment

Full Name
UpLink Optimize Method for Immediate Assignment
Abbreviation
PwrOptImmAssUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
case of immediate assignment.
Instance
Cell
2-713
SJ-20130408140048-016|2013-07-17(R1.0)
0: Off
1: On
Unit
N/A
Default Value
Default Value
Usually, the maximum power can be used during
immediate optimization.

Usually, this parameter is configured to "No".

To reduce interference by optimizing the initial power, this parameter
can be configured to "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.110 DownLink Optimize Method for Immediate Assignment

Full Name
DownLink Optimize Method for Immediate Assignment
Abbreviation
PwrOptImmAssDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
case of immediate assignment.
Instance
Cell
0: Off
1: On
2-714
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Usually, the maximum power can be used during
immediate optimization.
Usually, this parameter is configured to "No".
To reduce interference by optimizing the initial power or to improve
the success rate of power admission by using the function of dynamic

power sharing, this parameter can be configured to "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.111 Uplink target level

Full Name
Uplink target level
Abbreviation
UlTargetLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the uplink target level for power optimization.
When the system uses the uplink target level for power optimization, it is
required to adjust the initial transmission power of the MS, so as to make
Description
the receiving level of the BTS reach this value.
Instance
Cell
0..63
2-715
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
30
Default Value
Usually, -80 dBm is considered as a strong
uplink receiving level.

The value can be set in accordance with the network level/quality

distribution, to ensure that the receiving quality of the level is good.

If the value is set as too high, the effect of power optimization is not
obvious. If the value is set as too low, the access of new channels
is prone to fail.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.112 Downlink target level

Full Name
Downlink target level
Abbreviation
DlTargetLevel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the downlink target level for power optimization. When the system uses the downlink target level for power optimization, it is required to adjust the initial transmission power of the BTS, so
Description
as to make the receiving level of the MS reach this value.
Instance
Cell
2-716
SJ-20130408140048-016|2013-07-17(R1.0)
0..63
Unit
N/A
Default Value
35
Default Value
Usually, -75 dBm is considered as a strong
downlink receiving level.

The value can be set in accordance with the network level/quality

distribution, to ensure that the receiving quality of the level is good.

If the value is set as too high, the effect of power optimization is not
obvious. If the value is set as too low, the access of new channels
is prone to fail.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.113 Low RSSI threshold

Full Name
Low RSSI threshold
Abbreviation
LowRssiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-717
SJ-20130408140048-016|2013-07-17(R1.0)
When an MS is connected to the network, the BTS checks the electricity

level of the access burst on RACH and report it to the BSC. The BSC
categorize the receiving electricity level to the following three levels
according to the LOWRSSITHS and HIGHRSSITHS thresholds: high,
medium, and low.
When RSSI<LOWRSSITHS, MSPower_Opt = MSTXPowerMax
When LOWRSSITHS=<RSSI<HIGHRSSITHS, MSPower_Opt =
MSTXPowerMax-2dB
When RSSI>=HIGHRSSITHS, MSPower_Opt = MSTXPowerMax-4dB
Considering the symmetry of uplink and downlink channels, the system
Description
operations for the downlink cahnnel is the same with uplink channels.
Instance
Cell
0..63
Unit
N/A
Default Value
32
Default Value
Usually, -78 dBm on the RACH channel is considered

as a strong receiving level. In the case of immediate assignment,
the power can be decreased by 2 dB.
Setting of the value can according to the network level/quality distribution,
to ensure that the receiving quality is good when the uplink and downlink
power decreases by 2 dB, and the RACCH channel reaches this level.
It is recommended to set the value in a conservative manner, because

RACH signal only has one pulse, and the measurement accuracy of
signal strength is poorer than that of the dedicated channel.
Change Mode
Offline
Related features
N/A
Related Parameters
HighRssiThs
Relationship
R_BTS2.HighRssiThs > R_BTS2.LowRssiThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-718
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.114 High RSSI Threshold

Full Name
High RSSI Threshold
Abbreviation
HighRssiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When an MS is connected to the network, the BTS checks the electricity
level of the access burst on RACH and report it to the BSC. The BSC
categorize the receiving electricity level to the following three levels
according to the LOWRSSITHS and HIGHRSSITHS thresholds: high,
medium, and low.
When RSSI<LOWRSSITHS, MSPower_Opt = MSTXPowerMax
When LOWRSSITHS=<RSSI<HIGHRSSITHS, MSPower_Opt =
MSTXPowerMax-2dB
When RSSI>=HIGHRSSITHS, MSPower_Opt = MSTXPowerMax-4dB
Considering the symmetry of uplink and downlink channels, the system
Description
operations for the downlink cahnnel is the same with uplink channels.
Instance
Cell
0..63
Unit
N/A
Default Value
38
Default Value
Usually, -72 dBm on the RACH channel is considered

as a strong receiving level. In the case of immediate assignment,
the power can be decreased by 4 dB.
Setting of the value can according to the network level/quality distribution,
to ensure that the receiving quality is good when the uplink and downlink
power decreases by 4 dB, and the RACCH channel reaches this level.
It is recommended to set the value in a conservative manner, because

RACH signal only has one pulse, and the measurement accuracy of
signal strength is poorer than that of the dedicated channel.
Change Mode
Offline
Related features
N/A
Related Parameters
LowRssiThs
Relationship
R_BTS2.HighRssiThs > R_BTS2.LowRssiThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-719
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.115 Ms power inherit threshold

Full Name
Ms power inherit threshold
Abbreviation
MsPwrInheritThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is valid when the MS power optimization for non-rescue
handovers is enabled. When the BSC sends a handover command to the
MS for a non-rescue handover, such as PBGT handover, if the current
level is higher than the threshold, it means that the target cell has better signal quality. In this case, the current transmit power, instead of the
Description
maximum transmit power, should be used.
Instance
Cell
0..63
Unit
N/A
Default Value
27
Default Value
The level value -83 dB is enough for normal
services.


according to the actual application on site, network condition, and
network optimization plan.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-720
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.116 Additional reselection parameter indication(SI4)

Full Name
Additional reselection parameter indication(SI4)
Abbreviation
additionReselPI
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The cell selection and reselection of MS depends on the C1 and C2
parameters, according to the definition in the GSM specification.
Network carriers decide if to use C2 as the cell reselection parameter.
Additional reselection parameter indication is to notify MS if C2 criterion
is adoptable during the cell reselection.
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages.
Additional reselection parameter indication is one of the cell selection
parameters. Value Instruction:
Yes: MS takes off cell reselection parameter PI and the parameters
related to computing C2 from the rest bytes SI7/8 Rest Octets of
SYSTEM INFORMATION TYPE 7 or 8.
No: MS should obtain the PI parameter related to the cell reselection
and parameters related to C2 calculation from SI7/8 Rest
Octets of SYSTEM INFORMATION TYPE4.
Generally, the system messages 7 and 8 are seldom used. Normally this
parameter is No. It shall be Yes when the system adopts the
Description
system messages 7 and 8, and the cell reselection uses C2.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Re-election strategies from the field to consider a simple implementation
and generally do not use SI7 and SI8 considerations

2-721
SJ-20130408140048-016|2013-07-17(R1.0)
Generally, the system messages 7 and 8 are
seldom used. Normally the parameter AdditionReselPI is No.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.117 Cell reselection parameter indication

Full Name
Cell reselection parameter indication
Abbreviation
cellReselPI
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Cell reselection parameter indication notifies the MS if to use C2 as
the cell reselection parameter and if there is the related parameter for
calculating C2.
It indicates if the related parameter for calculating cell reselection
standard C2 is contained in SYSTEM INFORMATION message and
if C2 standard is adopted in the cell reselection. The successive Cell
reselection offset, Temporary offset and Penalty time are invalid, and MS
takes C1 as the cell reselection standard when this value is No.
This parameter is broadcasted to all MS in the cell in RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages. Cell reselection
parameter indication is one of the cell selection parameters. Value
Instruction:
No: MS gets parameters to compute C1 from cell broadcast system
Description
messages and regard C1 as a cell reselection standard. Parameters
2-722
SJ-20130408140048-016|2013-07-17(R1.0)
Cell bar qualify, Cell reselection offset, Temporary offset and Penalty
time are invalid.
Yes: MS should calculate C2 according to parameters extracted from
cell-broadcasting system messages, and take C2 as the standard for
cell reselection.
Enable this parameter, if related cell adopts C2 as the cell reselection
standard. Otherwise, disable it.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Re-election strategies from the field to consider a simple implementation

In the scenario with dual-frequency network
of dense urban area/urban area, it is suggested to enable C2 algorithm
of 1800 M to balance the traffic.For 900 M cell, this parameter is
subject to the traffic and actual configurations.Cell reselection

parameter indication should be enabled when CBA or CBQ is enabled
in the cell.
Change Mode
Offline
Related features
N/A
Related Parameters
CellBarQualify
ReselOffset
TemporaryOffset
PenaltyTime
Parameters Cell bar qualify, Cell reselection
Relationship
offset, Temporary offset and Penalty time are valid till cell reselection
parameter indication is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-723
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.118 Cell reselection offset

Full Name
Cell reselection offset
Abbreviation
reselOffset
Managed Object
3GPP Name
CELL_RESELECT_OFFSET
3GPP Reference
3GPP TS 45.008
This parameter is used at MS side. It is broadcast to MS via system
message by BTS. In the GPRS system, C32 is used as the standard
for cell reselection. C32 standard calculation, similar to C2 standard in
GSM, contains a cell reselection offset parameter.
This parameter is not necessary to append in packet system message
when the offset value is 0 dB.
This parameter indicates the parameters used during reselection on idle
Description
status, which only functions while configuring PBCCH.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
The value of the general experience of the wireless environment

Under the dual-band network scenario in the densely-populated urban
areas or urban areas, it is recommended to set this parameter as 4 to
8 for the 1800 M cell. Under the dual-band scenario in the suburb, it is
recommended to set this parameter as 0 to 5. Setting of the CRO, TO,
and PT parameters is as follows:
l. If the traffic is large or the communication quality in the cell is low for
some reason, the PenaltyTime can be set to 31, to make the MS camp
on this cell to a great extent (that is, a certain exclusiveness is acted on
the cell). Consequently, the TemporaryOffset parameter is invalid, C2
value equals to C1 minus Reseloffset, the C2 value corresponding to
this cell is reduced manually, and the possibility of the MS reselecting to

this cell is reduced. In addition, users can appropriately set ReselOffset
in accordance with the exclusiveness of this cell. The larger the
exclusiveness is, the larger the value of ReselOffset.
2. For the cell with low traffic and low equipment utilization, it is
recommended to set ReselOffset as 0~10 (corresponding to 0~20dB), to
make the MS operate in this cell (that is, a certain inclination is performed
on thsi cell). In this case, it is recommended to set ReselOffset in
accordance with the inclination of this cell. The larger the inclination is,
the larger the value of ReselOffset is. The value of TemporaryOffset is
2-724
SJ-20130408140048-016|2013-07-17(R1.0)
better to be the same as or higher than that of ReselOffset. PenaltyTime

is used to prevent the MS from frequent cell reselection, and its value
is recommended to set as 1 (20 s) or 2 ( 40 s) (same as 1800 M cell
in the dual-band network).
If this parameter is too large, the terminal will select the cell with low DL
level, which leads to a decrease of coverage rate tested. Setting of CRO
can reasonably take in or exclude traffic, effectively reduce SD/TCH
congestion rate, and improve the success rate of call setup.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.119 Temporary offset

Full Name
Temporary offset
Abbreviation
temporaryOffset
Managed Object
3GPP Name
TEMPORARY_OFFSET
3GPP Reference
3GPP TS 45.008
2-725
SJ-20130408140048-016|2013-07-17(R1.0)
The cell reselection due to radio channel quality takes C2 as the

standard. C2 is formed according to C1 parameter, and some special
offset parameters, to add the special influence as to enable MS to enter
some cells in priority. Usually, such measures allow balancing the traffic
on the network.
Besides C1, there are three factors affecting C2: Cell reselection offset,
Temporary offset, and Penalty time. Temporary offset indicates the
temporary modification value for C2. Temporary means that it only acts
on C2 for a period and the period depends on parameter Penalty time.
Network broadcasts the parameter information to all MSs in the cell
through RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages. It is one of the cell selection parameters. The validity of this
Description
parameter depends upon Cell reselection parameter indication.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

It is suggested to set the parameter to 1.
The parameter is appropriately offset within a certain penalty time
to avoid frequent reselection.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-726
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.120 Penalty time

Full Name
Penalty time
Abbreviation
penaltyTime
Managed Object
3GPP Name
PENALTY_TIME
3GPP Reference
3GPP TS 45.008
The cell reselection due to radio channel quality takes C2 as the
standard. C2 is formed according to C1 parameter, and some special
offset parameters, to add the special influence as to enable MS to enter
some cells in priority. Usually, such measures allow balancing the traffic
on the network.
Besides C1, there are three factors affecting C2: Cell reselection offset,
Temporary offset, and Penalty time. Temporary offset indicates the
temporary modification value for C2. Temporary means that it only acts
on C2 for a period and the period depends on parameter Penalty time.
Network broadcasts the parameter information to all MSs in the cell
through RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages. It is one of the cell selection parameters. The validity of this
Description
parameter depends upon Cell reselection parameter indication.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

It is suggested to set this parameter as 0
indicating 20s. The value is only used in traffic balance conditions
when it is set to 31 and CRO is a negative value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-727
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.121 Cell reselecting hysteresis level

Full Name
Cell reselecting hysteresis level
Abbreviation
reselHysteresis
Managed Object
3GPP Name
CELL_RESELECT_HYSTERESIS
3GPP Reference
3GPP TS 45.008
Whenever MS moves across the two cell boundary-regions with different
location area codes, it initiates Location Update (LU) procedure in IDLE
mode.
C2 values obtained at the boundary for two adjacent cells are different
because of fading characteristic of radio channel. It causes MS to select
cell frequently. In this case, LU interval is more than cell reselection
interval. This affects call success rate, due to unreachable paging
response to calling party.
This increases the signaling flow on the network and causes radio
resources to be fully utilized. In addition, it decreases call completion rate
of the system, as MS cannot respond to paging during location update.
In addition, value difference must be greater than the value specified
in CRH.
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. Cell
reselecting hysteresis level is one of the cell selection parameters.
Define Cell reselecting hysteresis level to 4 or 5 and make certain
adjustments in following cases:
Increase cell reselection parameters of adjacent cells with different LAC.
Signaling traffic overload often occurs due to large demand of services.
When the adjacent cells in different location areas have large overlapped
coverage, it is suggested to increase the CRH parameter.
If the adjacent cells with different LACs are poor in overlapped coverage,
that is, there is coverage gap, or the adjacent place is an area with few
slow moving objects such as the expressway, the CRH parameter shall
Description
be set as 1 ~ 3 (that is, 2dB ~ 6dB for the CRH level).
2-728
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..7
Unit
2dB
Default Value
Default Value

It is recommended to set this value for cross-LAC cells to a relatively
large value, so as to reduce large amount of location updates due to
frequent reselection.If the parameter is set to a relatively large value,
number of PS reselection times in the ready status can be reduced and
the rate can be improved;

If CRH value is increased in the cross-LAC cell, location updates can be
reduced, SD channel congestion rate can be reduced, and call set-up
success rate can be improved.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.122 New setup cause indication

Full Name
New setup cause indication
Abbreviation
neci
Managed Object
3GPP Name
NECI
3GPP Reference
3GPP TS 44.018
2-729
SJ-20130408140048-016|2013-07-17(R1.0)
The serving channels in the GSM system can be classified into channels
with full rate and channels with half rate according to GSM specifications.
Common GSM system supports channels with full rate. The network
operators decide if the network support half rate service. The new setup
reason denotes the NECI to notify MS if the area supports the half rate
service. The parameter notifies MS through the RIL3_RR SYSTEM
INFORMATION TYPE3 and TYPE4 messages and causes the value of
the meaning of channel request. NECI is one of networks functional
parameters.
Yes: half rate service access not supported by this cell;
Description
Yes: half rate service access is supported by this cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
According to the site need to open
It is suggested to require for half rate application.
This parameter can be set as "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.123 Power offset indication

Full Name
Power offset indication

2-730
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
powerOffsetInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides if to add offset value for Control channel MAX
power level parameter while sending access request message on RACH
for Class 3 MS of GSM1800. The necessity of offset value depends
on Power offset indication, that is, this parameter decides if Power
offset indication is valid. This parameter also affects MS calculating cell
selection and cell reselection standards C1 and C2.
Network broadcasts the parameter information to MSs in the cell through
Description
RIL3_RR SYSTEM INFORMATION TYPE3, 4, 7 and 8 messages.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Class 3 MSs of GSM1800 are rare, so it is suggested
to keep the default value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-731
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.124 Power offset

Full Name
Power offset
Abbreviation
powerOffset
Managed Object
3GPP Name
POWER OFFSET
3GPP Reference
3GPP TS 45.008
According to the GSM specification, for Class 3 MS of GSM 1800, the
transmission power for sending access request message on RACH is
to the value of Control channel MAX power level plus a modified value.
Power offset specifies the modified value. It determines if this parameter
is valid.
This parameter also affects the calculation of cell selection standard
C1 and cell reselection standard C2. Network broadcasts the
parameter information to MSs in the cell through RIL3_RR SYSTEM
Description
INFORMATION TYPE3, 4, 7 and 8 messages.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
Class 3 MSs of GSM1800 are rare, so it is suggested
to keep the default value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-732
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.125 Priority threshold

Full Name
Priority threshold
Abbreviation
prio_Thr
Managed Object
3GPP Name
PRIO_THR
3GPP Reference
3GPP TS 44.018
The parameter information is broadcast to MS through SI4, SI6 and SI7
messages. This parameter is correlated with RXLEV_ACCESS_MIN, and
Description
is used for calculation of C4 standard.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

The parameter impacts in PBCCH channel configuration,
and C31 and C32 re-selection standards. It is not recommended to be
used.
Change Mode
Offline
Related features
ZGO-02-02-012 Network Controlled Cell Reselection
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-733
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.126 LSA Offset

Full Name
LSA Offset
Abbreviation
lsa_Offset
Managed Object
3GPP Name
LSA_OFFSET
3GPP Reference
3GPP TS45.008
System broadcasts the parameter information to MS through SI4, SI6 and
SI7 messages. This parameter defines the offset value for LSA reselec-
Description
tion between two cells with the same LSA priority.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Consider not support LSA

The LSA services are not supported.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.127 Additional reselection parameter indicator(SI3)

Full Name
Additional reselection parameter indicator(SI3)
2-734
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
addResPI2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The cell selection and reselection by an MS depends on C1 and c3.
Whether to use C2 as the reselection paramter is decided by the network
service provider. AdditionReselPI (Additional Reselect Param Ind
ACS) is used to inform MS whether to apply C2 during the cell reselction.
This parameter is broadcast to MSs in a cell through a RIL3_RR
SYSTEM INFORMATION TYPE3 or RIL3_RR SYSTEM INFORMATION
TYPE4 message. for the parameter value, refer to the following:
No: If the rest bytes of SYSTEM INFORMATION TYPE4 (SI4 Rest
Octets) exists, the MS need to take the PI and C2 parameters;
Yes: The MS need to take the PI parameter and calculate the C2
parameter from rest byte of SYSTEM INFORMATION TYPE7 or
Description
SYSTEM INFORMATION TYPE8 (SI7/8 Rest Octets)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Generally, system information TYPE 7 and TYPE 8 are rarely used, this
parameter must be set as No, otherwise some MS (for example NEC)
are not able to access the network.
Generally, system messages TYPE 7 and TYPE
8 are rarely used. This parameter must be set as No, otherwise some
MSs (for example NEC) are unable to access the network.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-735
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17.128 MAX value of MS Radio link timeout

Full Name
MAX value of MS Radio link timeout
Abbreviation
msRadioLkTmOut
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
This parameter is the maximum value of radio link counter S at Ms side,
transmitted on BCCH or SACCH by BSS.
Radio link counter S is used to evaluate radio linkd failure. When MS
can't decode SACCH message (BFI=1), S decrements; when MS
successfully receives SACCH message (BFI=0), S increases by 2. If S
is decreased to 0, it indicates radio link fault, call shall be reestablished
Description
or released.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Default Value
MS calls to increase error tolerance for the wireless link
2-736
SJ-20130408140048-016|2013-07-17(R1.0)
The parameter is correlated with the call drop

rate. The call drop rate will be lowered if the parameter is set higher.
To improve the call drop rate index, this parameter can be set higher,
But is it not good for the user perception and system resources utility
rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.129 Radio link failure criterion

Full Name
Radio link failure criterion
Abbreviation
conFailCriterion
Managed Object
3GPP Name
Connection Failure Criterion
3GPP Reference
3GPP TS 12.12
The network side (BTS) may judge if the radio link fails according to two
criteria: One is based on the uplink SACCH error rate and the other
is based on measured value of RXLEV/RXQUAL. Radio link failure
criterion determines the method that the BTS uses as the standard to
judge connection failure.
If SACCH error rate is used as the standard to judge connection failure,
BTS uses the same value of Radio link timeout and the same process
as MS does. Thus, BTS avoids inconsistent judgment standards in the
uplink and downlink directions. Meanwhile, the Receiving level threshold
Description
and Receiving quality threshold parameters are invalid.
2-737
SJ-20130408140048-016|2013-07-17(R1.0)
If the measured value of RXLEV/RXQUAL is used as the standard to

judge connection failure, BTS will use the two parameters: Receiving
level threshold (RxLevThs) and Receiving quality threshold (RxQualThs).
The Value Range is as follows:
1: Uplink SACCH Error Rate Based (in order to ensure the same
judgment standard in the uplink and downlink directions);
2: RXLEV/RXQUAL Measurement Based
Instance
Cell
1: Uplink SACCH Error Rate Based
2: RXLEV/RXQUAL Measurement Based
Unit
N/A
Default Value
Default Value
Using the same criteria as MS

It is recommended to use the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.130 MAX value of BSS Radio link timeout

Full Name
MAX value of BSS Radio link timeout
Abbreviation
bsRadioLkTmOut
Managed Object
3GPP Name
RADIO_LINK_TIMEOUT
2-738
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter determines the maximum value of radio link counter S at
Description
the BSS side. It is used in the same way as MsRadioLKTmOut.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Default Value

The parameter is directly correlated with the
call drop rate. The higher the value, the lower the call drop rate.
To improve the KPI of call drop rate, this parameter can be configured
to a large value. However, it has negative impact on user perception.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-739
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.131 Receiving level threshold

Full Name
Receiving level threshold
Abbreviation
rxLevThs
Managed Object
3GPP Name
RXLEV
3GPP Reference
3GPP TS 12.12
The network side (BTS) may judge if the radio link fails according to two
criteria: One is based on the uplink SACCH error rate and the other is
based on measured value of RXLEV/RXQUAL.
The radio link is considered as failed if BTS detects one of the following
conditions: The uplink receiving level is smaller than a certain threshold;
The uplink receiving quality is greater than a certain threshold. This
only applies, if the measured value of RXLEV/RXQUAL is used as
the standard to judge a connection failure. Receiving level threshold
specifies the threshold of receiving level.
This parameter is invalid if uplink SACCH error rate is used as the
standard to judge connection failure (Radio link failure criterion is 1).
Description
Receiving level threshold is one of the configuration parameters of BTS.
Instance
Cell
0..63
Unit
N/A
Default Value
10
Default Value
This parameter indicates the level threshold
to determine the radio link fault.
Change Mode
Offline
Related features
N/A
Related Parameters
ConFailCriterion
Relationship
Related Interfaces
This parameter is invalid when ConFailCriterion

is set as "RXLEV/RXQUAL Measurement Based".
Abis
2-740
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.132 Receiving quality threshold

Full Name
Receiving quality threshold
Abbreviation
rxQualThs
Managed Object
3GPP Name
RXQUAL
3GPP Reference
3GPP TS 12.12
The network side (BTS) may judge if the radio link fails according to
two criteria. One is based on uplink SACCH error rate, and the other is
based on measured value of RXLEV/RXQUAL.
If the measured value of RXLEV/RXQUAL is used as the standard to
judge a connection failure, the radio link will be considered as failed
when BTS detects that the uplink receiving level is smaller than a
certain threshold or the uplink receiving quality is greater than a certain
threshold. Receiving quality threshold specifies the receiving threshold
quality.
If the uplink SACCH error rate is used as the standard to judge a
connection failure, this parameter is invalid. This parameter is one of the
Description
configuration parameters of BTS.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
This parameter indicates the level threshold
to determine the radio link fault.
Change Mode
Offline
2-741
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
ConFailCriterion
Relationship

Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.133 Radio link failure checking period

Full Name
Radio link failure checking period
Abbreviation
rxLevQualPrd
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 12.12
This parameter indicates the period to detect radio link failure at the network side (in the unit of SACCH multiframe), including the detection of
channel strength (dBm) and signal quality received by each channel. This
parameter is invalid if "Uplink SACCH Error Rate Based" is used as the
Description
criteria to judge a connection failure.
Instance
Cell
1..63
Unit
SACCH mf
Default Value
63
Default Value

The parameter is directly correlated with the
call drop rate. The higher the value, the lower the call drop rate.
To improve the KPI of call drop rate, this parameter can be configured
to a large value. However, it has negative impact on user perception.
2-742
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
ConFailCriterion
Relationship

Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.134 BCCH switch allowed

Full Name
BCCH switch allowed
Abbreviation
CanBcchExch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter decides whether the cell allows BCCH switch.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Turn on this switch when the BCCH switchover

function needs to be enabled. After the BCCH switchover function is

enabled, BCCH carrier frequency switchover will be triggered if BCCH
carrier frequency comes across faults, to avoid the service quit of
cell.
2-743
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
CanBCCHEx
Relationship
The dynamic BCCH shift function only takes effect when the functional
switch of the BSC and that of the cell are both enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.135 Dynamic configuration SDCCH

Full Name
Dynamic configuration SDCCH
Abbreviation
CanSdcchDyn
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
uration.
Instance
Cell
This parameter decides whether the cell allows SDCCH dynamic config-
0: Off
1: On
Unit
N/A
Default Value
Default Value
function needs to be enabled. After the cell dynamic SDCCH switchover
has been enabled, dynamic SDCCH channel handover will be triggered
Turn on this switch when the SDCCH switchover
during cell location update to lower SDCCH channel congestion rate.
2-744
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
CanSDCCHDyn
Relationship
The cell switchover takes effect only when BSC switch and the cell level
switch should be turned on at a same time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.136 Baseband frequency hopping TRX exchange support

Full Name
Baseband frequency hopping TRX exchange support
Abbreviation
SupBBHopExChange
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the base band hopping switch-over is
supported. This function is supported only when the all switches at the
BSC level and Cell level are all enabled. When a carrier of the base band
hopping group is in fault, the system will automatically move and keep the
Description
faulty frequency out of the group until it resumes.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
This parameter is a switch for a function.
It is turned off by default.
2-745
SJ-20130408140048-016|2013-07-17(R1.0)

The cell that is configured with base band

hopping should enable this function to avoid the impact caused by
the faulty carrier frequency.
Change Mode
Offline
Related features
N/A
Related Parameters
BHTESupp
A cell supports the base band frequency hopping
Relationship
switch-over only when the switches in BSC level and cell level
parameters
are set "Yes".
Related Interfaces
Abis interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.137 Start PA power off

Full Name
Start PA power off
Abbreviation
StartPAPowerOff
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is to save energy and reduce consumption. BTS system
can turn off PA offset voltage while close power for idle timeslots. If the
configuration is conducted on BTS, FPGA can determine whether PA off-
Description
set voltage shall be turned off.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
0
2-746
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Turn on this switch when needed.
Change Mode
Offline
Related features
ZGO-04-04-003 Intelligent Timeslot Shutdown
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.138 Switch flag of cell TRX power off

Full Name
Switch flag of cell TRX power off
Abbreviation
StartTRXPowerOff
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
It marks whether "Switch Flag of Cell TRX Power Off" is enabled.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
2-747
SJ-20130408140048-016|2013-07-17(R1.0)

When the function is enabled, the BTS will

reduce the traffic to a certain extent and will shut down part of
the transceiver functions for power saving.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.139 Start PA output voltage tuning

Full Name
Start PA output voltage tuning
Abbreviation
StartPAOutVolTuning
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the TRX starts the function of adjusting
Description
PA voltage based on BTS output power.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
If this function is enabled, BTS will adjust
PA voltage based on the output power.

2-748
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.140 Enable RRU of cell power off

Full Name
Enable RRU of cell power off
Abbreviation
RRUPOWEROFF
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the power-off of RRUs is enabled in a
cell. When the RRU power-off is enabled, some TRXs can be turned off
for energy saving and consumption reducing when the traffic is not busy
Description
in the cell (such as midnight).
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
2-749
SJ-20130408140048-016|2013-07-17(R1.0)
When the cell RRU switch-off function needs

to be enabled, this parameter should be set to "Yes". After this function
is enabled, idle state RRU will shut down part of its function for
electricity saving. When the traffic increases, power on RRU.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.141 The switch of CIR report

Full Name
The switch of CIR report
Abbreviation
ReportCIR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether CIR (C/I value) is included in the measurement report. CIR information can be obtained in "C/I measurement"
Description
and "carrier frequency measurement".
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
This is a switch for a special function. The
switch is disabled by default.
2-750
SJ-20130408140048-016|2013-07-17(R1.0)

The functional switch is turned on when needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.142 The L2 frame of Lapdm fill random value

Full Name
The L2 frame of Lapdm fill random value
Abbreviation
LapdmL2Cfg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the LAPDm L2 frame is filled with a
random value.
The LAPDm L2 frame used to be filled with a fix value (00101011). Due
to the fixed value, a call may be easily decrypted and listened to by other
persons. The LAPDm L2 frame filled with a random value makes a call
Description
difficult to be decrypted and ensures the conversation security.
Instance
Cell
0: no, meaning that only fixed value 0x2B can be filled
1: yes, meaning that random values can be filled
Unit
N/A
Default Value
2-751
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
In most cases the encryption is disabled, so
no fill-in value is needed.
When the encryption is enabled, L2 fill-in
frames in Lapdm should be selected to avoid wiretapping.
Change Mode
Offline
Related features
ZGO-06-02-002 Random Fill Bits
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.143 MR Report Time Bmp

Full Name
MR Report Time Bmp
Abbreviation
mrRptTimeBmp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter provides a check function about 0 ~ 23 time points. You
can enable measurement data report at different points. Each time point
indicates a hour, within 0 ~ 23 hours.
Only if checking corresponding time and enabling report function about
Description
measurement report data, MR data can be reported.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
2-752
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Set this parameter according to the time needed
by MR collection.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.144 Support intelligent cell shutting down

Full Name
Support intelligent cell shutting down
Abbreviation
CellShuttingDown
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameters specifies whether a cell supports intelligent cell
shutdown.
If the coverage area of a 900M cell covers that of an 1800M cell in a
dual-band network, the BSC starts shutting down TRXs when detecting
that the traffic in the 1800M cell meets the condition for TRX shutdown
during the allowed period. The BCCH TRX is the last TRX to be shut
Description
down. It is shut down when no traffic exists in the cell.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
2-753
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

In a dual-band network, if the 1800M cell is
covered by another cell such as a 900M cell, this function can be
enabled according to operator requirements.
Change Mode
Offline
Related features
ZGO-04-04-007 Intelligent Cell Shutdown
Related Parameters
StartTRXPowerOff
Relationship
The intelligent cell shutdown function is enabled until the intelligent

carrier shutdown function is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.17.145 Upper GGsmCell DN

Full Name
Upper GGsmCell DN
Abbreviation
refGGsmCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameters indicates the DN of the upper cell that covers the local
cell (1800M cell). If the upper 900M cell is referenced when the intelligent
cell shutdown function enabled, the local cell shuts down or starts up the
Description
BCCH TRX in accordance with the traffic in the 900M cell.
Instance
Cell
None
Unit
N/A
2-754
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
NA
Default Value
The intelligent cell shutdown function is disabled by default.
Change Mode
Offline
Related features
ZGO-04-04-007 Intelligent Cell Shutdown
Related Parameters
CellShuttingDown
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.146 Mobile Originated Short Message Intercept

Full Name
Mobile Originated Short Message Intercept
Abbreviation
MOSmsIntercept
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Mobile Orignated Short Message Intercept
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
2-755
SJ-20130408140048-016|2013-07-17(R1.0)
Generally, disable this function. Enable it if required by the telecom
operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.147 Mobile Terminated Short Message Intercept

Full Name
Mobile Terminated Short Message Intercept
Abbreviation
MTSmsIntercept
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Mobile Terminated Short Message Intercept
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Generally, disable this function. Enable it if required by the telecom
operator.
Change Mode
Offline
2-756
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.148 Diversity Combine Mode

Full Name
Diversity Combine Mode
Abbreviation
DivCombMode
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the diversity combine mode. The IRC mode,
which remedies the weakness of the MRC mode, can eliminate interference signals when combining the expired signals. The EIRC mode is
better than the IRC mode in co-frequency interference-limited scenarios
Description
but worse than the IRC mode in noise-limited scenarios.
Instance
Cell
0: MRC
1: IRC
2: EIRC
Unit
N/A
Default Value
Default Value
This mode is applicable in different scenarios. When interference
condition is not clear, IRC is recommended.
2-757
SJ-20130408140048-016|2013-07-17(R1.0)
The IRC mode improves MRC by eliminating interference signals at the

time of combining expected signals. ERIC has a better performance
than IRC in scenarios when co-frequency interference is limited, but a
worse performance than IRC in scenarios when noise is limited.

By default, this parameter is set to 1, meaning IRC. This is applicable in
multiple scenarios. When the actual interference condition is not clear,
IRC is recommended.
When the scenario is determined to be co-frequency interference, set
the parameter to EIRC.
Change Mode
Offline
ZGO-04-01-005 Interference Rejection Combining (IRC)
Related features
ZGO-04-01-009 Enhanced IRC
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.149 Joint Source-Controlled Channel Decoding Switch

Full Name
Joint Source-Controlled Channel Decoding Switch
Abbreviation
JSCCDSwitch
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Joint source-controlled channel decoding can promote decoding performance and voice quality in poor channel environment to improve sub-
Description
scriber satisfaction with voice service.
Instance
Cell
2-758
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value

In poor channel environment, joint source-controlled channel decoding
can enhance decoding performance and voice quality to meet subscriber
voice requirement. In good channel environment, joint source-controlled
channel decoding consumes more Digital Signal Processing (DSP)

operation resources to decrease other services but voice quality is not
greatly improved.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.150 Joint Source-Controlled Channel Decoding

Full Name
Joint Source-Controlled Channel Decoding
Abbreviation
JSCCD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates an algorithm of joint source-controlled channel
Description
decoding.
2-759
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
1:Inter Frame
2:Inter-Intra Frame
Unit
N/A
Default Value
Default Value
Change Mode
A higher decoding gain is required.

Intra-frame predictive algorithm is simple and a lower gain is obtained.
Interframe predictive algorithm, including interframe and intra-frame
prediction, is complicated and a higher gain is obtained.
Offline
Related features
Related Parameters
JSCCDSwitch
Relationship
JSCCDSwitch enables or disables the function.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.151 IBS time bitmap

Full Name
IBS time bitmap
Abbreviation
DownPowerBmp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-760
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates a time bitmap whether to enable power-on or

power-off. The value "0 23 BIT" corresponds to the time 0 23. The
BIT value "1" indicates that power-on or power-off can be performed at
this time. The BIT value "0" indicates that power-on or power-off cannot
Description
be performed at this time.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]
Default Value
The default value is set to periods of idle time of traffic.
The default value is recommended. The value can be set to a period of
idle time of traffic in accordance with perform statistics.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.152 Cell shuttingdown based on traffic load

Full Name
Cell shuttingdown based on traffic load
Abbreviation
PwDownLoadInd
Managed Object
3GPP Name
N/A
2-761
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter determines whether to enable cell power-off based on
Description
service load.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Two common power-off modes are optional: based on loads and

not based on loads. The function is disabled by default, and the
corresponding value is set to 1.
If power-off not based on loads is required, the parameter is set to 0. If
power-off based on loads is required, the parameter is set to 1.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.153 Support implicit reject in assignment

Full Name
Support implicit reject in assignment
Abbreviation
SuppImplicitReject
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-762
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether an implicit access rejection field is

carried in a direct assignment message. The terminal supporting the implicit rejection function determines whether to initiate an implicit rejection
Description
flow when initiating an access request.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
If the function needs to be enabled, the parameter is set to 1. If not,
the parameter is set to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.154 Implicit reject CS and PS

Full Name
Implicit reject CS and PS
Abbreviation
ImpltRejCsAndPs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-763
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates an implicit rejection field carried in a direct assignment message. The field means implicitly rejecting an access to a
Description
terminal with low access priority.
Instance
Cell
0:Not implicit reject CS and PS
1:Implicit reject PS
2:Implicit reject CS
3:Implicit reject CS and PS
Unit
N/A
Default Value
Default Value
This parameter is set in according with service importance and
lower-priority service rejection in service congestion.
The parameter is set in accordance with an actual requirement for
implicitly rejecting an access to low-priority CS and PS service.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.155 Support broadcasting EAB

Full Name
Support broadcasting EAB
Abbreviation
SuppBroadcastEAB
Managed Object
3GPP Name
N/A
2-764
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter determines whether to support broadcasting an Enhanced
Description
Address Book (EAB) message by SI 21.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
If the function needs to be enabled, the paramter is set to 1. If not ,the
parameter is set to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.156 EAB Subcategory

Full Name
EAB Subcategory
Abbreviation
EABSubcategory
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-765
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates a terminal category for which the EAB authority
Description
code is applicable.
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
The parameter is applicable for all terminals configured with an EAB
by default.

The parameter is set in accordance with actual planning.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.157 EAB Authorization Mask

Full Name
EAB Authorization Mask
Abbreviation
EABAuthorizeMask
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the category of access-forbiden terminals con-
Description
figured with an EAB in a corresponding flow control level.
Instance
Cell
2-766
SJ-20130408140048-016|2013-07-17(R1.0)
0..1023
Unit
N/A
Default Value
[0,1,3,7,15,31,63,127,255,511,1023,1023,1023]
If there is no flow control, the terminal configured with an EAB can be
Default Value
accessed. A lower flow control level corresponds to less categories of

access-forbidden terminals configured with an EAB. A higher flow control
level corresponds to more categories of access-forbidden terminals
configured with an EAB.

The parameter is set in accordance with actual planning.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.158 EAB Position

Full Name
EAB Position
Abbreviation
EABPosition
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a broadcasting position of SI 21.
Instance
Cell
2-767
SJ-20130408140048-016|2013-07-17(R1.0)
0:Normal
1:Extend
Unit
N/A
Default Value
Default Value
The default broadcasting position is BCCH Normal.

The broadcasting position of SI 21 is set as required.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.159 NCC Config Parameter

Full Name
NCC Config Parameter
Abbreviation
NccCfgPara
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates neighbor coordination configuration.
Instance
Cell
0:Nonsupport NCC
1:Support NCC
Unit
N/A
2-768
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
The neighbor cell coordination function is supported only in
SDRV4.11.13.

Change Mode
If the serving cell and a neighbor cell of an MS are located in a base

station, NCC can combine received processing signals to enhance voice
quality.
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.160 RxQual Threshlod

Full Name
RxQual Threshlod
Abbreviation
RQThreshold
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the uplink RQ threshold.
Instance
Cell
2-769
SJ-20130408140048-016|2013-07-17(R1.0)
0:bit error rate under 0.2%

1:bit error rate between 0.2%~0.4%
7:bit error rate over 12.8%
Unit
N/A
Default Value
Default Value
The neighbor cell coordination function is supported only in
SDRV4.11.13.

Change Mode
The value should be equal to or less than RQThreshold during handover.

If the RQ reported by an MS is greater than RQThreshold, the
NccCfgPara function is enabled.
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.161 TCH Allocation Threshold For Dual-Frequency Network

Full Name
TCH Allocation Threshold For Dual-Frequency Network
Abbreviation
DualFreqNetTchThs
Managed Object
3GPP Name
N/A
2-770
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates a traffic channel allocation threshold of a cell in
Description
a dual-frequency network.
Instance
Cell
0..100
Unit
Default Value
50
Default Value

Directional re-handover to the associated cell in a dual-frequency

network is considered only when the local cell has an appropriate traffic
load.
If the local cell has great interference, the threshold should be adjusted
to a lower value to ensure of directional re-handover to the associated
cell in a dual-frequency network
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New

Full Name
Abbreviation
UmSynSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-771
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether the cell participates in a collection of

Description
clock difference inforation in the soft synchronization of air-interface clock.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
The parameter is disabled if enabling the parameter is not required on
site.

If the cell needs to participate in a collection of clock difference

information in the soft synchronization of air-interface clock, the function
is enabled. If not, the function is disabled.
Change Mode
Offline
Related features
Related Parameters
Gumsyn.UmSynSupport
Relationship
The cell-level switch is enabled when Gumsyn.UmSynSupport is

enabled.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.163 Is Enhanced Dual-Frequency Network Support

Full Name
Is Enhanced Dual-Frequency Network Support
Abbreviation
IsDualFreqSup
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-772
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether a cell supports an enhanced dualDescription
frequency network.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Only specified cells support a dual-frequency network.
The function is enabled when the cell is associated with a cell in a
dual-frequency network.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.164 SubCell Channel Allocation Control

Full Name
SubCell Channel Allocation Control
Abbreviation
CSAllocSC
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates a priority of subcell channel allocation.
Instance
Cell
2-773
SJ-20130408140048-016|2013-07-17(R1.0)
0:SubCell2 as preferred channel allocation subCell

1:SubCell1 as preferred channel allocation subCell
Unit
N/A
Default Value
Default Value
The second cell is prior to acquire traffic.
If the first subcell needs to be assigned preferentially, the parameter
should be set to subcell 1 for channel allocation.
Change Mode
Offline
Related features
Related Parameters
UseLoadBalance
Relationship
This parameter must also be set to 1 if the parameter CSAllocSC is set

to 1 (priority is given to channel allocation to subcell 1).
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.165 Use Uniform Power Control

Full Name
Use Uniform Power Control
Abbreviation
UseUniformPwrCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a new power control parameter is
Description
used to unify the power control algorithm.
Instance
Cell
2-774
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The function is disabled by default to ensure compatibility of base station
versions.
The function is enabled when the new power control parameter needs
to be used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B
Parameter Modifying
Detail
New
2.17.166 Longitude
Full Name
Longitude
Abbreviation
Longitude
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Longitude
Instance
Cell
-180.00000..180.00000
Unit
N/A
2-775
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
180.00000
Default Value
N/A

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.167 Latitude
Full Name
Latitude
Abbreviation
Latitude
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Latitude
Instance
Cell
-90.00000..90.00000
Unit
N/A
Default Value
90.00000
Default Value
N/A
2-776
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.168 Altitude
Full Name
Altitude
Abbreviation
altitude
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Antenna altitude
Instance
Cell
0..32767
Unit
Default Value
Default Value
N/A

Change Mode
Offline
Related features
N/A
2-777
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.169 Offset Angle

Full Name
Offset Angle
Abbreviation
offsetAngle
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Antenna azimuth
Instance
Cell
0..360
Unit
Default Value
Default Value
N/A

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-778
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.170 Site location

Full Name
Site location
Abbreviation
address
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Site address
Instance
Cell
0..255
Unit
N/A
Default Value
NA
Default Value
N/A

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-779
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.171 Immediate assignment maximum delay times

Full Name
Immediate assignment maximum delay times
Abbreviation
IAMAXDelayTimes
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Maximum delay times of immediate assignment
Instance
Cell
0..9
Unit
N/A
Default Value
Default Value
The maximum delay times are 3.

The larger the value of this parameter, the more the times of delaying
the transmission of immediate assignment messages and the less the
preemption of immediate assignment messages to paging messages.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-780
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.172 Filter Exceed Traffic threshold NCell

Full Name
Filter Exceed Traffic threshold NCell
Abbreviation
FiltExcdThsNCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of non-emergency handover, "FiltExcdThsCell" is supported to
determine whether to filter the neighbor cells whose traffic load exceeds the
Description
threshold. The switch does not depend on the dynamic priority switch.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
In the case of non-emergency handover, the neighbor cells whose traffic
load exceeds the threshold are not filtered by default.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.173 Emergency Handover use Dynamic Priority

Full Name
Emergency Handover use Dynamic Priority
2-781
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
EmergHoDynPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the cell parameter "hoControlPrioChg" is enabled, this parameter determines whether to calculate the dynamic priority of a neighbor cell in the
Description
case of emergency handover.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
By default, the dynamic priority adjustment of emergency handover is
disabled.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.174 Assign strategy for Cobcch

Full Name
Assign strategy for Cobcch
Abbreviation
SubCellAssign
Managed Object
2-782
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
When the COBCCH function is enabled in the field, there are usually few
channels on the first subcell. In this case, the system tries to make users
borne on the second subcell and assigns users to the second subcell when
the pass loss or TA meets requirements. However, the signals measured
on the SDCCH channel of the first subcell are local signals. Sometimes,
it is inaccurate to use the measurement result to calculate path loss and
determine whether to assign users to the second subcell. As a result, the
assignment success rate is low. To solve this problem, assignment only in
the first subcell is supported. To use this assignment mode, the channels in
the first subcell must be sufficient and the customer requires to improve the
assignment success rate. After the assignment is complete, the users that
meet the requirements of the second subcell are switched to the second
subcell through cell handover. This parameter determines the assignment
Description
mode used.
Instance
Cell
0:According to Radio Measure 1:Only Subcell1
Unit
N/A
Default Value
Default Value
In most of application scenarios, the MSs that meet requirements are

expected to be assigned to the second subcell, so as to avoid congestion
in the first subcell.
This parameter is usually set to "According to Radio Measure". This
parameter can be set to "Only Subcell1" when the channels in the first
subcell are sufficient (not easy to cause congestion) and the assignment
success rate needs to be improved.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-783
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.175 Arf power reduce function switch

Full Name
Arf power reduce function switch
Abbreviation
SupportArfPwrReduce
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of the GU co-frequency and common mode, the Burst transmit
power of UMTS neighbor frequencies can be compressed on the basis of
power control through the characteristics of GSM frequency hopping and
interleaving. This aims to reduce the interference brought by GSM signals
Description
to UMTS signals.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
By default, the switch is off.

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-784
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.176 SupportBtsBcchExchg
Full Name
SupportBtsBcchExchg
Abbreviation
SupportBtsBcchExchg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter helps select the target BCCH carrier on the BTS and notify
the BSC to migrate traffic so as to ensure that no call drop occurs during
Description
cell handover.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
The switch is on only when the BCCH handover is enabled.

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-785
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.17.177 Stop power Reduce Level Threshold

Full Name
Stop power Reduce Level Threshold
Abbreviation
StopPwrReduceThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Power compression is not implemented if the actual value is lower than this
Description
threshold.
Instance
Cell
0..15
Unit
0.5db
Default Value
Default Value
The interference to UMTS is reduced and the impact on GSM is small.

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-786
SJ-20130408140048-016|2013-07-17(R1.0)
2.17.178 Reduce Power Step

Full Name
Reduce Power Step
Abbreviation
ReducePower
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Power compression amplitude allowed for frequency points
Instance
Cell
0..12
Unit
0.5db
Default Value
Default Value
The interference to UMTS is reduced and the impact on GSM is small.

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.179 Reduce Power Arfcn

Full Name
Reduce Power Arfcn
Abbreviation
PowerReduceARFCN
Managed Object

2-787
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Frequency point, requiring power compression
Instance
Cell
0..1023,65535
Unit
Default Value
[65535,65535]
Default Value
None

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.180 Prom power step

Full Name
Prom power step
Abbreviation
AVGPromPower
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Non-compressed frequency point, requiring power amplitude compression
Instance
Cell
2-788
SJ-20130408140048-016|2013-07-17(R1.0)
0..2
Unit
0.5db
Default Value
Default Value
1 dB

N/A
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.181 Non Emergency Handover use Dynamic Priority

Full Name
Non Emergency Handover use Dynamic Priority
Abbreviation
NonEmergHoDynPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the cell parameter "hoControlPrioChg" is enabled, this parameter determines whether to calculate the dynamic priority of a neighbor cell in the
Description
case of non-emergency handover.
Instance
Cell
0:No 1:Yes
Unit
N/A
2-789
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
By default, the dynamic priority adjustment of non-emergency handover
is disabled.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.182 Immediate assignment occupy PCH option

Full Name
Immediate assignment occupy PCH option
Abbreviation
PCHOccupyOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the switch is on, the immediate assignment messages of the BTS do
not preempt the PCH block if they can be all sent on the AGCH block at the
Description
next 51 multiframe.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
By default, the switch is off. Keep it the same as that in the previous
version.
2-790
SJ-20130408140048-016|2013-07-17(R1.0)

When the function is enabled, the number of times that immediate

assignment messages preempt paging messages is reduced but the
transmission of immediate assignment messages is delayed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.17.183 Dynamic Priority NCell Traffic Threshold

Full Name
Dynamic Priority NCell Traffic Threshold
Abbreviation
DynPrioNCellTrafThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the load on an adjacent cell is greater than this threshold, the dynamic
priority of the adjacent cell is calculated. Otherwise, the dynamic priority of
Description
the adjacent cell is equal to its static priority.
Instance
Cell
0..100
Unit
N/A
Default Value
Default Value
By default, the dynamic priority of an adjacent cell is calculated when

the load on the cell is equal to or greater than 0 during dynamic priority
adjustment.
2-791
SJ-20130408140048-016|2013-07-17(R1.0)

If the adjacent cell with a certain volume of calls always fails to be selected
as a candidate cell due to dynamic priority adjustment, this load threshold
can be increased.
Change Mode
Offline
Related features
N/A
Related Parameters
hoControlPrioChg, NonEmergHoDynPrio, EmergHoDynPrio
Relationship
This parameter cannot be valid until the cell dynamic priority function is
enabled.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.18 Cell Precise Paging Configuration

(GCellPrecisePaging)
2.18.1 Cell Precise Paging Configuration ID
Full Name
Cell Precise Paging Configuration ID
Abbreviation
GCellPrecisePaging
Managed Object
Cell Precise Paging Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Cell Precise Paging Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
2-792
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Cell Precise Paging Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.18.2 Adopt Precise Paging for Circuit Switched Service

Full Name
Adopt Precise Paging for Circuit Switched Service
Abbreviation
csPrecisePag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether exact paging is applied for the CS
Description
service when the last service of a subscriber belongs to this cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
In most cases, the BSC switch can be used to

control the function of exact paging. Therefore, the function of exact
paging for the cell CS service is enabled by default.
2-793
SJ-20130408140048-016|2013-07-17(R1.0)
For the cells with subscribers moving quickly,
the function of exact paging can be disabled.
Change Mode
Offline
Related features
Related Parameters
PrecisePagSupport
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.18.3 Adopt Precise Paging for Packet Switched Service

Full Name
Adopt Precise Paging for Packet Switched Service
Abbreviation
psPrecisePag
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether exact paging is applied for the CS
Description
service when the last service of a subscriber belongs to this cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
In most cases, the BSC switch can be used to

control the function of exact paging. Therefore, the function of exact
paging for the cell PS service is enabled by default.
2-794
SJ-20130408140048-016|2013-07-17(R1.0)
For the cells with subscribers moving quickly,
the function of exact paging can be disabled.
Change Mode
Offline
Related features
Related Parameters
PrecisePagSupport
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.18.4 VPC Age Time

Full Name
VPC Age Time
Abbreviation
vpcAgeTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the time since the last service of a subscriber occurs exceeds the
aging time configured in this parameter, the VPC cell will not be used as a
cell for exact paging. If this parameter is configured to 0, it indicates that
Description
the VPC is valid permanently.
Instance
Cell
0..65535
Unit
min
Default Value
Default Value
Usually, if no subscriber is found in the new
cell, the subscriber must be in the original cell.
2-795
SJ-20130408140048-016|2013-07-17(R1.0)
Usually, this parameter can be configured to

be valid permanently. If this parameter is configured to another value,

the moving speed of subscribers must be taken into consideration.
To be specific, the time for the subscribers to move out of the VPC
must be calculated.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710C
Parameter Modifying
Detail
New
2.18.5 Paging Hole Timer

Full Name
Paging Hole Timer
Abbreviation
pagHoleTimer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the paging time since the service is triggered last time does not
Description
beyond the time specified in the timer, start the paging blackhole counter.
Instance
Cell
1..65535
Unit
N/A
Default Value
180
Default Value
In most cases, subscribers will not leave the
cell within three minutes after using services in the cell.
2-796
SJ-20130408140048-016|2013-07-17(R1.0)


according to the moving speed of subscribers in the cell. The faster
the moving speed of subscribers, the shorter the time and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710d
Parameter Modifying
Detail
New
2.19 Location Area (GLocationArea)

2.19.1 Location Area ID
Full Name
Location Area ID
Abbreviation
GLocationArea
Managed Object
Location Area
3GPP Name
N/A
3GPP Reference
N/A
Description
Location Area ID
Instance
None
1..65533, 65535
Unit
N/A
Default Value
N/A
Default Value
None
2-797
SJ-20130408140048-016|2013-07-17(R1.0)

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->Location

Information Configuration->Location Area
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.19.2 LAC
Full Name
LAC
Abbreviation
lac
Managed Object
Location Area
3GPP Name
N/A
3GPP Reference
3GPP TS44.018
Description
The value is consistent with the data at CN side.
Instance
LAC
1..65533, 65535
Unit
N/A
Default Value
NA
Default Value
2-798
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.19.3 IMSI attach/detach allowed

Full Name
IMSI attach/detach allowed
Abbreviation
imsiAdAllowed
Managed Object
Location Area
3GPP Name
ATT
3GPP Reference
3GPP TS44.018
IMSI attach/detach allowed determines whether cell allows IMSI
Attach/Detach procedure. IMSI detach occur when MS reports switch-off
or when the SIM card is taken out from the MS.
The network (normally VLR) marks Detach flag in subscriber
information table. Such procedure assists the network to prevent
unnecessary
paging broadcast message to MS. Accordingly, the IMSI Attach process
means that the MS reports entering the working status to the network
or the MS checks after the SIM card is re-inserted into the MS if the LAI
where the MS is located is consistent with the original one
saved. If yes, the IMSI Attach process will be started; otherwise, the
location updating process will be started instead.
The network (normally VLR) marks Attach flag in subscriber information
Description
table.
2-799
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is included in Control channel information and is used

for RIL3_RR SYSTEM INFORMATION TYPE3 message.
This parameter of each cell in the same location area shall be identical.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Consider network optimization
This parameter of each cell in a same location area shall be identical.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.19.4 Periodical location updating timer

Full Name
Periodical location updating timer
Abbreviation
t3212
Managed Object
Location Area
3GPP Name
T3212
3GPP Reference
3GPP TS 44.018
2-800
SJ-20130408140048-016|2013-07-17(R1.0)
Location update results from two major causes in GSM system. One is
when MS changes from old LAC to new LAC and the second is when
the network notifies MS for periodic location update.
Network controls the location time interval and depends upon T3212
timer. Network broadcasts to all MSs in the cell by RIL3_RR SYSTEM
INFORMATION TYPE3 message. T3212 timer is one of the system
control parameters.
The setting of this parameter will affect the overall service performance
and utilization rate of radio resources of the network. For the area with
higher traffic, the period could be bigger (for example 16 or 20 hours,
even 25 hours); for the area with ordinary traffic, the value of T3212
could be smaller (for example 3 or 6 hours); for the area with extreme
Description
overload traffic, it is recommended to set T3212 as 0.
Instance
Cell
0..255
Unit
360s
Default Value
10
Default Value
consultation with the MSC

This parameter affects the overall service
performance of the network and the utilization of the radio resource.
For the area with higher traffic, the period could be bigger (for
example 16 or 20 hours, even 25 hours); for the area with ordinary
traffic, the value of T3212 could be smaller (for example 3 or 6 hours);
for the area with extreme overload traffic, it is recommended to set
T3212 as 0. The default value can be set to 10 (1 hour). Configuration
of this parameter should be same within the same location area, while
the value that VLR periodically updates the timer should be greater
than this parameter. This parameter is set to 10 by default. It should
be smaller than the implicit power-off duration of CN. The value of
T3212 under the same LAC should be consistent. In case the coverage
is poor, set this parameter to a small value, which has assistance
for increasing paging success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
2-801
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
Yes
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.20 Routing Area (GRoutingArea)

2.20.1 Routing Area ID
Full Name
Routing Area ID
Abbreviation
GRoutingArea
Managed Object
Routing Area
3GPP Name
N/A
3GPP Reference
N/A
Description
Routing Area ID
Instance
None
0..255
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-802
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Information Configuration->Routing Area
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.20.2 RAC
Full Name
RAC
Abbreviation
rac
Managed Object
Routing Area
3GPP Name
None
3GPP Reference
N/A
cell reselection.
than one SGSN.
Description
Instance
Cell
0..255
Unit
N/A
Default Value
NA
Default Value
One RAI cannot be configured in several SGSNs.
The value is consistent with the data at the CN side.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-803
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->Routing Area
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21 AMR Configuration (GCellAmr)

2.21.1 AMR Configuration ID
Full Name
AMR Configuration ID
Abbreviation
GCellAmr
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
AMR Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-804
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->AMR Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.2 Support AMR Codec

Full Name
Support AMR Codec
Abbreviation
amrSupport
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether AMR Codec is supported.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
The AMR function is restricted by LICENSE, so the default setting is
Not Supported.

Configure this parameter in accordance with the LICENSE.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-805
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.3 Use cell AMR parameter

Full Name
Use cell AMR parameter
Abbreviation
useCellAmrParam
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the AMR parameters of the cell are
enabled.
If no, the AMR parameters set in the BSC are preferred.
Description
If yes, the AMR parameters of the cell are preferred.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
In most cases, the AMR parameters can be set
in a unified manner in the BSC for convenient configuration.
Enable this switch if you want to set the AMR
parameter depending on the characteristics of the cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-806
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs1
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
4.75kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
This parameter specifies whether the ACS of AMR FR contains the
Default Value

Generally, select both high rate and low rate. When the radio signals
in a cell are comparatively good, select high rate only. When the radio
signals in a cell are comparatively bad, select low rate only.
Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-807
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-808
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-809
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrFullAcs4
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
2-810
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
amrFullAcs5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs6
Managed Object
AMR Configuration
2-811
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs7
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-812
SJ-20130408140048-016|2013-07-17(R1.0)
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFullAcs8
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
2-813
SJ-20130408140048-016|2013-07-17(R1.0)
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs1
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
2-814
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

2-815
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

2-816
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs4
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
2-817
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
kbps codec mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
2-818
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHalfAcs6
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-819
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds1
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 4.75kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
13
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
2-820
SJ-20130408140048-016|2013-07-17(R1.0)
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.15 kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
14
Default Value
Change Mode
Offline
Related features
2-821
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.9kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
15
2-822
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds4
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-823
SJ-20130408140048-016|2013-07-17(R1.0)
Description
mode to 6.7kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
17
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-824
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrFrThresholds5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.4kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
18
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-825
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds6
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.95kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
2-826
SJ-20130408140048-016|2013-07-17(R1.0)
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrThresholds7
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 10.2kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
23
Default Value
Change Mode
Offline
Related features
2-827
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds1
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 4.75kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
18
2-828
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 5.15kbps.
Instance
Cell
2-829
SJ-20130408140048-016|2013-07-17(R1.0)
0..63
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
2-830
SJ-20130408140048-016|2013-07-17(R1.0)
Description
mode to 5.9kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
23
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrThresholds4
2-831
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 6.7kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
26
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-832
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrHrThresholds5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode to 7.4kbps.
Instance
Cell
0..63
Unit
N/A
Default Value
30
Default Value
Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-833
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis1
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 4.75kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
2-834
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.15kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
2-835
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.9kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
3
2-836
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis4
2-837
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 6.7kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis5
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-838
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.4kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
2-839
SJ-20130408140048-016|2013-07-17(R1.0)
amrFrHysteresis6
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis6
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.95kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
2-840
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis7
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrFrHysteresis7
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 10.2kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
4
2-841
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrFrThresholds1
amrFrThresholds2
amrFrThresholds3
amrFrThresholds4
amrFrThresholds5
amrFrThresholds6
amrFrThresholds7
amrFrHysteresis1
amrFrHysteresis2
amrFrHysteresis3
amrFrHysteresis4
amrFrHysteresis5
amrFrHysteresis6
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis1
2-842
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 4.75kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


observing the frequency of rate adjustment (for example, through

Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-843
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrHrHysteresis2
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.15kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis3
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-844
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis3
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 5.9kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis4
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
2-845
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis4
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 6.7kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
2-846
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis5
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
amrHrHysteresis5
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
Description
mode from 7.4kbps.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value

2-847
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
Related Parameters
amrHrThresholds1
amrHrThresholds2
amrHrThresholds3
amrHrThresholds4
amrHrThresholds5
amrHrHysteresis1
amrHrHysteresis2
amrHrHysteresis3
amrHrHysteresis4
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.42 Enable AMR FR noise control

Full Name
Enable AMR FR noise control
Abbreviation
amrFrNscb
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
2-848
SJ-20130408140048-016|2013-07-17(R1.0)

MS is disabled for the AMRFR speech version. The noise suppression
background noise.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
quality.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.43 AMR FR Initial codec mode

Full Name
AMR FR Initial codec mode
Abbreviation
amrFrIcm
Managed Object
AMR Configuration
3GPP Name
N/A
2-849
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.009
This parameter indicates the initial speech codec mode of AMR FR
mode.
Description
mode.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
amrFrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-850
SJ-20130408140048-016|2013-07-17(R1.0)
2.21.44 AMR FR Start mode

Full Name
AMR FR Start mode
Abbreviation
amrFrStartMode
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter decides the initial codec mode for the AMR FR speech
Description
Instance
Cell
1..4
Unit
N/A
Default Value
Default Value

If the radio quality is good, use a higher initial rate.
Change Mode
Offline
Related features
Related Parameters
amrFullAcs1
amrFullAcs2
amrFullAcs3
amrFullAcs4
amrFullAcs5
amrFullAcs6
amrFullAcs7
amrFullAcs8
amrFrIcm
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-851
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.45 Enable AMR HR noise control

Full Name
Enable AMR HR noise control
Abbreviation
amrHrNscb
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
MS is disabled for the AMRHR speech version. The noise suppression
background noise.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
quality.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-852
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.46 AMR HR Initial codec mode

Full Name
AMR HR Initial codec mode
Abbreviation
amrHrIcm
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 45.009
This parameter indicates the initial speech codec mode of AMR HR
mode.
Description
mode.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features

2-853
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
amrHrStartMode
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.47 AMR HR Start mode

Full Name
AMR HR Start mode
Abbreviation
amrHrStartMode
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter decides the initial codec mode for the AMR HR speech
Description
Instance
Cell
1..4
Unit
N/A
Default Value
Default Value
If the radio quality is good, use a higher initial rate to improve the voice
quality.
Change Mode
Offline
2-854
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
amrHalfAcs1
amrHalfAcs2
amrHalfAcs3
amrHalfAcs4
amrHalfAcs5
amrHrIcm
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.48 AMR codec adjust mode

Full Name
AMR codec adjust mode
Abbreviation
amrAdjMode
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
The AMR rate regulation mode falls into two types: AMR quick regulation
where the BTS perform self-control, and quick regulation mode where the
Description
BTS use the default time (960ms).
Instance
Cell
0: AMR rapid speed mode
1: Interval of configuration's adjacent
Unit
N/A
Default Value
Default Value
2-855
SJ-20130408140048-016|2013-07-17(R1.0)


The rate adjustment is determined by the BTS. The interval of 960
ms is appropriate for rate adjustment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.49 AMR codec adjust interval

Full Name
AMR codec adjust interval
Abbreviation
amrAdjInterval
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the interval for AMR codec adjustment. This
parameter is valid when the AmrAdjMode parameter is set to "Intervalbased adjustment mode". Refer to the description of AmrAdjMode for
Description
more information.
Instance
Cell
1..50
Unit
480ms
Default Value
Default Value
2-856
SJ-20130408140048-016|2013-07-17(R1.0)
The default value is recommended. Generally,

the AMR rapid rate adjustment mode is adopted in the network, and
the BTS can properly control the adjustment. If operator intervene

is needed for rate adjustment, select the interval-based rate adjustment
mode and set the value of this parameter. The larger the parameter
value is, the longer the adjustment interval is, that is, the slower
a rate adjustment is.
Change Mode
Offline
Related features
Related Parameters
AmrAdjMode
Relationship
This parameter is valid only when the AmrAdjMode

parameter is set to "Interval-based rate adjustment".
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.50 BSS radio link timer's max value for AMR FR

Full Name
BSS radio link timer's max value for AMR FR
Abbreviation
bsRadioLkTmOutAMRFR
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
2-857
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the maximum value (initial value) of S that

is the counter for AMR-FRvoice service failure. GSM rule specifies
that BTS needs a counter S, which is rendered a value recorded in
parameter BsRadioLkTmout when the call starts. Once BTS fails to
decode a correct SACCH message when it should, S will decrease by
1. Once BTS decodes a correct SACCH message, S is increased by 2.
The value of S cannot exceed BsRadioLkTmout.
When S reaches 0, BTS will report radio link fault. This counter is
Description
designed for AMR-FR voice service.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Default Value
This parameter can have a big value, so there
will be plenty of time to restore the normal quality call.

When this parameter has a big value, there
will be plenty of time to restore the normal quality call. When the
parameter has a small value, it is difficult to restore the normal

quality call and the radio resources will be released.
Change Mode
Offline
Related features
ZGO-04-02-007 AMR Radio Link Timers_FG_20101030
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
2-858
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.51 BSS radio link timer's max value for AMR HR

Full Name
BSS radio link timer's max value for AMR HR
Abbreviation
bsRadioLkTmOutAMRHR
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
This parameter indicates the maximum value (initial value) of S that
is the counter for AMR-HRvoice service failure. GSM rule specifies
that BTS needs a counter S, which is rendered a value recorded in
parameter BsRadioLkTmout when the call starts. Once BTS fails to
decode a correct SACCH message when it should, S will decrease by
1. Once BTS decodes a correct SACCH message, S is increased by 2.
The value of S cannot exceed BsRadioLkTmout.
When S reaches 0, BTS will report radio link fault. This counter is
Description
designed for AMR-HR voice service.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
2-859
SJ-20130408140048-016|2013-07-17(R1.0)
14: 60
15: 64
Unit
SACCH mf
Default Value
15
Default Value


Change Mode
Offline
Related features
ZGO-04-02-007 AMR Radio Link Timers_FG_20101030
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.21.52
timeout for AMR FR
Full Name
timeout for AMR FR
Abbreviation
msRadioLkTmOutAMRFR
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
2-860
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the maximum value of the MS-side radio link
counter S that is used for AMR FR. The parameter value is transmitted
on the BCCH or SACCH by the BSS.
The radio link counter S is used to evaluate radio link failures.
S is decreased by one when the MS fails to decode an SACCH message
(BFI=1).
S is increased by two when the MS receives an SACCH message
(BFI=0).
When S=0, which indicates a radio link failure, the call is reestablished
Description
or released.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
2-861
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.21.53
timeout for AMR HR
Full Name
timeout for AMR HR
Abbreviation
msRadioLkTmOutAMRHR
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
counter S that is used for AMR HR. The parameter value is transmitted
on the BCCH or SACCH by the BSS.
(BFI=1).
(BFI=0).
Description
or released.
Instance
Cell
2-862
SJ-20130408140048-016|2013-07-17(R1.0)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-863
SJ-20130408140048-016|2013-07-17(R1.0)
2.21.54 Support AMR-WB Codec

Full Name
Support AMR-WB Codec
Abbreviation
SUPPORTAMRWB
Managed Object
AMR Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the AMR-WB is supported in a cell. It
Description
is configured for individual cells.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
according to the on-site environment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
2-864
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
amrWfsHysteresis1
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrWfsThresholds1\amrWfsThresholds2\amrWfsThresholds3\amrWfsThresholds4
Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
2-865
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsHysteresis2
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
2-866
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsHysteresis3
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..15
Unit
N/A
Default Value
2-867
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsHysteresis4
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
2-868
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
Relationship

Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-869
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrOwfsHysteresis1
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrOwfsHysteresis2.
Description
amrOwfsHysteresis2
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrOwfsThresholds1\amrOwfsThresholds2
Relationship
amrOwfsHysteresis2.
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
2-870
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwfsHysteresis2
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrOwfsHysteresis2.
Description
amrOwfsHysteresis2
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
amrOwhsThresholds1amrOwhsThresholds2
2-871
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship
amrOwfsHysteresis2.
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsHysteresis1
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrOwhsHysteresis2.
Description
amrOwhsHysteresis2
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value

2-872
SJ-20130408140048-016|2013-07-17(R1.0)


value.
Change Mode
Offline
Related features
Related Parameters
amrOwhsThresholds1amrOwhsThresholds2
Relationship
amrOwhsHysteresis2.
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsHysteresis2
Managed Object
AMR Configuration
3GPP Name
hysteresis
3GPP Reference
3GPP TS 45.009
amrOwhsHysteresis2.
Description
amrOwhsHysteresis2
Instance
Cell
2-873
SJ-20130408140048-016|2013-07-17(R1.0)
0..15
Unit
N/A
Default Value
Default Value


value.
Change Mode
Offline
Related features
Related Parameters
Relationship
amrOwhsHysteresis2.
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds1
Managed Object
AMR Configuration
3GPP Name
threshold
2-874
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.009
There are four threshold values during AMRWFS mode change:
amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3, and
amrWfsThresholds4. The following condition must be met:
amrWfsThresholds1amrWfsThresholds2amrWfsThresholds3amrWfsThresholds4amrWfsThresholds1amrWfsHysteresis1amrWfsThresholds2amrWfsHysteresis2amrWfsThresholds3
Description
amrWfsHysteresis3amrWfsThresholds4amrWfsHysteresis4
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
amrWfsHysteresis1\amrWfsHysteresis2\amrWfsHysteresis3\amrWfsHysteresis4
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
2-875
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds2
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
amrWfsThresholds1, amrWfsThresholds2, amrWfsThresholds3,
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
Relationship
2-876
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds3
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
2-877
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrWfsThresholds4
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
Description
Instance
Cell
0..63
Unit
N/A
Default Value
6
2-878
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
Related Parameters
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwfsThresholds1
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
2-879
SJ-20130408140048-016|2013-07-17(R1.0)

amrOwfsThresholds2.
Description
amrOwfsHysteresis2
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
amrOwfsHysteresis1\amrOwfsHysteresis2
amrOwfsThresholds2.
Relationship
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-880
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
amrOwfsThresholds2
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
amrOwfsThresholds2.
Description
amrOwfsHysteresis2
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
amrOwfsThresholds2.
Relationship
amrOwfsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
2-881
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsThresholds1
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
amrOwhsThresholds2.
Description
amrOwhsHysteresis2
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
amrOwhsHysteresis1\amrOwhsHysteresis2
2-882
SJ-20130408140048-016|2013-07-17(R1.0)

amrOwhsThresholds2.
Relationship
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
amrOwhsThresholds2
Managed Object
AMR Configuration
3GPP Name
threshold
3GPP Reference
3GPP TS 45.009
amrOwhsThresholds2.
Description
amrOwhsHysteresis2
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value

2-883
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
amrOwhsHysteresis1\amrOwhsHysteresis2
amrOwhsThresholds2.
Relationship
amrOwhsHysteresis2
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.21.71
timeout for AMR WFS
Full Name
timeout for AMR WFS
Abbreviation
msRadioLkOutAmrWfs
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
2-884
SJ-20130408140048-016|2013-07-17(R1.0)
counter S used for AMR WFS. The parameter value is transmitted on
the BCCH or SACCH by the BSS.
(BFI=1).
(BFI=0).
Description
or released.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
2-885
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.21.72
Full Name
Abbreviation
msRadioLkOutAmrOwfs
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
counter S that is used for AMR-WB OWFS. The parameter value is
transmitted on the BCCH or SACCH by the BSS.
(BFI=1).
(BFI=0).
Description
or released.
Instance
Cell
2-886
SJ-20130408140048-016|2013-07-17(R1.0)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-887
SJ-20130408140048-016|2013-07-17(R1.0)
2.21.73
Full Name
Abbreviation
msRadioLkOutAmrOwhr
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
counter S that is used for AMR-WB OWHS. The parameter value is
transmitted on the BCCH or SACCH by the BSS.
(BFI=1).
(BFI=0).
Description
or released.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
2-888
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.21.74 BSS radio link timers max value for FR-AMR-WB

Full Name
BSS radio link timer's max value for FR-AMR-WB
Abbreviation
bsRadioLkOutAMRWFS
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
This parameter indicates the maximum value (initial value) of the BSSside radio link counter S that is used for failure detection in the case of
FR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
is required in the BTS. This counter is assigned an initial value (the value
of BsRadioLkTmout) before a call starts. When the BTS fails to decode
a received SACCH message correctly, S is decreased by one. When the
BTS receives a SACCH message correctly, S is increased by two. The S
value must be less than the BsRadioLkTmout value. When S=0, the BTS
Description
reports a radio link failure.

2-889
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-890
SJ-20130408140048-016|2013-07-17(R1.0)
2.21.75 BSS radio link timer's max value for OFR-AMR-WB

Full Name
BSS radio link timer's max value for OFR-AMR-WB
Abbreviation
bsRadioLkOutAmrOwfs
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
OFR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
Description
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


2-891
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.21.76 BSS radio link timer's max value for AMR OWHR
Full Name
BSS radio link timer's max value for AMR OWHR
Abbreviation
bsRadioLkOutAmrOwhr
Managed Object
AMR Configuration
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
3GPP TS 45.008
OHR-AMR-WB voice traffic. As specified in GSM protocols, the counter S
Description
Instance
Cell
2-892
SJ-20130408140048-016|2013-07-17(R1.0)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
8: 36
9: 40
10: 44
11: 48
12: 52
13: 56
14: 60
15: 64
Unit
N/A
Default Value
15
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-893
SJ-20130408140048-016|2013-07-17(R1.0)
2.22 Frequency Hopping System (GHoppingFrequency)

2.22.1 Frequency Hopping System ID
Full Name
Frequency Hopping System ID
Abbreviation
GHoppingFrequency
Managed Object
Frequency Hopping System
3GPP Name
N/A
3GPP Reference
N/A
Description
Frequency Hopping System ID
Instance
None
None
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Frequency Hopping System
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.22.2 FhsID
Full Name
FhsID
2-894
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
fhsId
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is an identification of frequency hopping system.
Instance
Cell
1..254
Unit
N/A
Default Value
NA
Default Value
None
radio network planning.
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
ZGO-04-03-004 Baseband Frequency Hopping
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.22.3 Hopping sequence No.

Full Name
Hopping sequence No.
Abbreviation
HSN
Managed Object
3GPP Name
hopping sequence number
2-895
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 44.018
According to GSM 05.02 Frequency Hoping Algorithm, MAI is a function
of TDMA Frame number (FN), Hoping Sequence Number (HSN) and
Mobile Allocation Index Offset (MAIO). HSN determines the operation
track of frequencies during the frequency hopping process.
Using different HSN for cells having same MA can avoid frequency
utilization conflict between adjacent cells during the frequency hopping
process.
Different timeslots can share the same group of MA and corresponding
HSN. When HSN = 0, it is a special frequency hopping (i.e. circular
frequency hopping) HSN can be derived from BCC of the cell, because
cells using the same MA also have the same BCCH.
For example, if HSN [(BCC6) +1, .., (BCC6) +6], then each cell
may use any of the 6 HSNs. The remaining 0 and 49 ~ 63 are used
in other
Description
special cases. If for simple, directly use 0 by default.
Instance
Cell
0..63
Unit
N/A
Default Value
NA
Default Value
None
radio network planning. HSN is not recommended to set to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-896
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.22.4 MA Frequency List

Full Name
MA Frequency List
Abbreviation
MaArfcnList
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter provides a list of absolute RF channel number in a
frequency hopping group.It is a CA sub-set of the home cell. The related
information will be notified to MS when MS is notified of which channel
should be used.
Description
User can click Add or Del to perform adding or deleting operation.
Instance
Cell
0..1023
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-897
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.23 Baseband Hopping System (GHoppingBaseband)

2.23.1 Baseband Hopping System ID
Full Name
Baseband Hopping System ID
Abbreviation
GHoppingBaseband
Managed Object
Baseband Hopping System
3GPP Name
N/A
3GPP Reference
N/A
Description
Baseband Hopping System ID
Instance
None
1..255
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Baseband Hopping System
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-898
SJ-20130408140048-016|2013-07-17(R1.0)
2.23.2 FhsID
Full Name
FhsID
Abbreviation
fhsId
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter is an identification of frequency hopping system.
Instance
Cell
1..254
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.23.3 Hopping sequence No.

Full Name
Hopping sequence No.
Abbreviation
HSN
Managed Object

2-899
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
hopping sequence number
3GPP Reference
3GPP TS 44.018
According to GSM 05.02 Frequency Hoping Algorithm, MAI is a function
of TDMA Frame number (FN), Hoping Sequence Number (HSN) and
Mobile Allocation Index Offset (MAIO). HSN determines the operation
track of frequencies during the frequency hopping process.
Using different HSN for cells having same MA can avoid frequency
utilization conflict between adjacent cells during the frequency hopping
process.
Different timeslots can share the same group of MA and corresponding
HSN. When HSN = 0, it is a special frequency hopping (i.e. circular
frequency hopping) HSN can be derived from BCC of the cell, because
cells using the same MA also have the same BCCH.
For example, if HSN [(BCC6) +1, .., (BCC6) +6], then each cell
may use any of the 6 HSNs. The remaining 0 and 49 ~ 63 are used
in other
Description
special cases. If for simple, directly use 0 by default.
Instance
Cell
0..63
Unit
N/A
Default Value
NA
Default Value
None
radio network planning. HSN is not recommended to set to 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-900
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.23.4 MA Frequency List

Full Name
MA Frequency List
Abbreviation
MaArfcnList
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter provides a list of Absolute RF Channel Numbers (ARFCNs) that correspond to all frequencies in a hopping frequency group
of a cell. This list is a subset of the Cell Allocation (CA) table of the cell.
The BSC notifies MSs of available channels in the cell by sending this
Description
parameter to the MSs.
Instance
Cell
0..1023
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-901
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.24 Handover Control (GHandoverControl)

2.24.1 Handover Control ID
Full Name
Handover Control ID
Abbreviation
GHandoverControl
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-902
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.2 Uplink power level Sample count

Full Name
Uplink power level Sample count
Abbreviation
hoUlLevWindow
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter is the window size (number of sample values) used to
calculate average value of uplink signal intensity.
Description
The parameter is Used in TCH handover
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Number of samples should be enough for ensuring

the preciseness of handover decision, and for initiating handover
as early as possible when the signal is poor during communication.
If the value is set too small and samples of handover decision are too

few, the handover decision is incorrect.

If the value is set too large, it takes a long time to make handover
decisions, which is likely to result in call drops caused by handover
delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-903
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.3 Uplink level Weight

Full Name
Uplink level Weight
Abbreviation
hoUlLevWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Speech data is unavailable for silent period during conversation. GSM
specifications recommend Discontinuous Transmission Mode (DTX) to
control optimal usage of network resources during such silent periods.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate. Therefore, BSC, when averaging
the measurement values, uses different weights for the two types of
measurement data.
This parameter determines the weight for the first type of measurement
data when averaging uplink signal strength for power control. Weight for
Description
the second type of measurement data is set to 1 by default.
Instance
Cell
1..3
Unit
N/A
Default Value
Default Value
In the non-DTX mode, the measurement data is
accurate, so the weight is relatively high.
Generally, it is recommended not to modify
the weight.
Change Mode
Offline
2-904
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.4 Downlink power level Sample count

Full Name
Downlink power level Sample count
Abbreviation
hoDlLevWindow
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
This parameter represents the window size (i.e. the number of sample
values) used to calculate the average value of downlink signal intensity.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

2-905
SJ-20130408140048-016|2013-07-17(R1.0)

delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.5 Downlink level Weight

Full Name
Downlink level Weight
Abbreviation
hoDlLevWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
According to GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode.
BSC needs to optionally select one type of measurement data and use
Description
the data to calculate the average value.
2-906
SJ-20130408140048-016|2013-07-17(R1.0)

timeslots, and it is less accurate.
Therefore, BSC, when averaging the measurement values, uses
different weights for the two types of measurement data.
data when averaging downlink signal strength for power control. Weight
for the second type of measurement data is set to 1 by default.
Instance
Cell
1..3
Unit
N/A
Default Value
Default Value
the weight.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.6 Uplink quality Sample count

Full Name
Uplink quality Sample count
Abbreviation
hoUlQualWindow
Managed Object
Handover Control
2-907
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
This parameter represents the window size (number of sample values)
used to calculate average value of uplink signal quality.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-908
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.7 Uplink quality Weight

Full Name
Uplink quality Weight
Abbreviation
hoUlQualWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
data when averaging uplink signal quality for power control. Weight for
Description
Instance
Cell
1..3
Unit
N/A
Default Value
Default Value
the weight.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-909
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.8 Downlink quality Sample count

Full Name
Downlink quality Sample count
Abbreviation
hoDlQualWindow
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
values) used to calculate the average value of downlink signal quality.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
2-910
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.9 Downlink quality Weight

Full Name
Downlink quality Weight
Abbreviation
hoDlQualWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
2-911
SJ-20130408140048-016|2013-07-17(R1.0)
data when averaging downlink signal quality for power control. Weight
for the second type of measurement data is set to 1 by default.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
the weight.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.10 Distance
Full Name
Distance
Abbreviation
distanceWindow
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
2-912
SJ-20130408140048-016|2013-07-17(R1.0)

used to calculate average value of distance (timing advance) between
MS and BTS.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-913
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.11 Neighboring cell

Full Name
Neighboring cell
Abbreviation
ncellWindow
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
used to calculate average value of signal intensity for adjacent cells.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-914
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.12 Number of zero allowed in AV

Full Name
Number of zero allowed in AV
Abbreviation
zeroAllowed
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
According to GSM specifications, MS can report to BSS the
measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results might not be consecutive. For
cells whose signal strength is less than -110 dBm, the measurement
data are not reported.
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell .
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description
(NCellWindow - the count of 0s).
Instance
Cell
0..20
Unit
N/A
Default Value
Default Value
Occasional 0 is acceptable.Excessive occurrences
of 0 indicate that the signals of this adjacent cell are too poor.
2-915
SJ-20130408140048-016|2013-07-17(R1.0)
If the number of 0s allowed is adjusted as too small, the adjacent cell

with good signal maybe missed.
If the number of 0s allowed is adjusted as too large, handover to the
adjacent cell with poor signal maybe initiated.

It is recommended to set the value as small as possible, in order to
select the adjacent cell with good signal.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.13 MIN interval between inter-cell handover

Full Name
MIN interval between inter-cell handover
Abbreviation
hoMinInterval
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the inter-cell handover, but not common intra-cell or inter-cell
concentric handover. In addition, micro-cell has its own handover policy,
Description
so this parameter is only effective for macro-cell layer and its above layer.
2-916
SJ-20130408140048-016|2013-07-17(R1.0)
For macro-cell, the default value can be 5; for micro-cell, the default
value can only be 0.
Instance
Cell
0..31
Unit
Default Value
Default Value
experience value
Large value indicates a longer interval between two handovers, avoiding

frequent handover but causing delay.

Small value indicates a shorter interval between two handovers and
handover is initiated faster, causing frequent handover.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.14 Max time advance threshold between MS and BTS

Full Name
Max time advance threshold between MS and BTS
Abbreviation
distanceThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-917
SJ-20130408140048-016|2013-07-17(R1.0)
According to GSM specifications, handover decisions depend upon received average value of uplink and downlink signal strength. The decision
process is as follows: For the latest N average values of TA (distance),
if P of the N values rises above relevant threshold value, then perform
Description
handover. The handover is due to MS being out of the cell service range.
Instance
Cell
{parent.cellType==0}[0..63]
Unit
N/A
{parent.cellType==0}63,
Default Value
{parent.cellType==4}219
Default Value
The TA handover is usually not used.

It is necessary to configure this parameter when the TA handover is
used. In that case, this parameter is set to "Attempt a TA handover when
an MS is beyond the coverage of the BS to a certain extent".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-918
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.15 Uplink receive level Threshold

Full Name
Uplink receive level Threshold
Abbreviation
hoUlLevThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
According to GSM specifications, handover decisions depend upon
received average value of uplink and downlink signal strength. The
decision process is as follows: For the latest N average values of uplink
signal strength, if P of the N values fall below relevant threshold value,
perform handover to improve the uplink signal strength.
The HoUlLevThs parameter defines the related threhold value. The
HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value. Usually the value of "HoUlLevThs"
shall be less than the threshold for uplink power control. That is, perform
Description
power control first. If power control does not work, perform handover.
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
2-919
SJ-20130408140048-016|2013-07-17(R1.0)
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
Default Value
Usually, -95 dbm is considered as the demarcation
point between the good uplink level and poor uplink level.
2-920
SJ-20130408140048-016|2013-07-17(R1.0)
The value the larger is, the handover is more

unlikely to occur, and vice versa the handover is easier to occur.If
the value is too large, quantity of call drops may rise. If the value
is too small, excessive handovers may occur.
Change Mode
Offline
Related features
Related Parameters
N/A
Usually the value of "HoUlLevThs" should be
Relationship
less than the threshold for uplink power control (increase). That
is, perform power control first. If power control does not work, perform
handover.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.16 Downlink receive level Threshold

Full Name
Downlink receive level Threshold
Abbreviation
hoDlLevThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-921
SJ-20130408140048-016|2013-07-17(R1.0)
The handover decision can be made after a series of average values are
obtained. The downlink receiving strength is one of the causes that will
bring about handover. The decision process is as follows: if the values of
P out of N number of recent downlink signal strength are lower than the related threshold, handover should be performed. And the cause is that the
downlink signal strength is too weak. Parameter HoDlLevThs defines
the related threshold, parameter HoDlLevN defines the related N value,
and parameter HoDlLevP defines the related P value. HoDlLevThs defines the threshold, which is 15 by default (-96 dBm to -95 dBm). The
parameter value must be 3 dB greater than the minimum electricity level
Description
(RxLevAccessMin).
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
2-922
SJ-20130408140048-016|2013-07-17(R1.0)
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
15
Default Value
Change Mode
Offline
Related features
2-923
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Usually the value of "HoDlLevThs" shall be less than the threshold for
Relationship
downlink power control (increase). That is, perform power control first. If
power control does not work, perform handover.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.17 Uplink receive quality Threshold

Full Name
Uplink receive quality Threshold
Abbreviation
hoUlQualThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
signal quality, if P of the N values rise above relevant threshold value,
perform handover to improve the uplink signal quality. The HoUlQualThs
parameter defines the related threhold value.
Usually the value of "HoUlQualThs" shall be greater than the threshold
for uplink power control (increase). That is, perform power control first.
If power control does not work, perform handover. The HoUlQualN
parameter defines the related N value. The HoUlQualP parameter
Description
defines the related P value.
Instance
Cell
8..70
Unit
N/A
Default Value
49
2-924
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Generally, the quality is considered as poor
when its level is above 49.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.18 Downlink receive quality Threshold

Full Name
Downlink receive quality Threshold
Abbreviation
hoDlQualThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter specifies a downlink receive quality threshold.
As specified in GSM specifications, a handover decision can be made
after enough average values are obtained. The downlink receive
quality is one of the handover reasons. If P (HoDlQualP) of the latest
N (HoDlQualN) average downlink receive quality values are greater
than this threshold (HoDlQualThs), a handover decision is made due
to poor downlink receive quality.
The downlink receive quality threshold (HoDlQualThs) must be greater
than the threshold for downlink power control (increase), which is
Description
specified by the parameter PcDlInclQualThs in the R_POC table. When

2-925
SJ-20130408140048-016|2013-07-17(R1.0)
the downlink receive quality is poor, the BSC carries out a power control
first. The handover decision is made only when the power control fails.
Instance
Cell
8..70
Unit
N/A
Default Value
49
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.19 Uplink receive level of intra-ho Threshold

Full Name
Uplink receive level of intra-ho Threshold
Abbreviation
intraHoUlLevThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-926
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies an uplink receive level threshold.

after enough average values are obtained. The uplink receive level
is one of the handover reasons. If P (IntraHoUlLevP) of the latest N
(IntraHoUlLevN) average uplink receive level values are greater than
this threshold (IntraHoUlLevThs), an intra-cell handover decision is
made due to serious uplink (co-frequency) interference.
The uplink receive level threshold (IntraHoUlLevThs) must be greater
Description
than the threshold for uplink power control (decrease).
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
2-927
SJ-20130408140048-016|2013-07-17(R1.0)
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
35
Default Value
experience value
The period to submit an uplink measurement
report is 20 ms and the period to submit an downlink measurement report
is 200 ms, so the average value of the uplink is larger than that
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
2-928
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.20 Downlink receive level of intra-ho Threshold

Full Name
Downlink receive level of intra-ho Threshold
Abbreviation
intraHoDlLevThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter specifies a downlink receive level threshold.
after enough average values are obtained. The downlink receive level
is one of the handover reasons. If P (IntraHoDlLevP) of the latest N
(IntraHoDlLevN) average downlink receive level values are greater than
this threshold (IntraHoDlLevThs), an intra-cell handover decision is
made due to serious downlink (co-frequency) interference.
The downlink receive level threshold (IntraHoDlLevThs) must be equal
Description
to or less than the threshold for downlink power control (decrease).
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
2-929
SJ-20130408140048-016|2013-07-17(R1.0)
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
2-930
SJ-20130408140048-016|2013-07-17(R1.0)
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
40
Default Value
experience value
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.21 Uplink receive level Value P

Full Name
Uplink receive level Value P
Abbreviation
hoUlLevP
2-931
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
It is recommended to set the default value
as this, so as to ensure the accuracy and rapidness of handover.

The larger the value is, it is more difficult

to perform handover. The smaller the value is, the easier the handover
is.If the value is too large, quantity of call drops rises easily.
If the value is too small, number of unnecessary handovers may
increase.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoUlLevP<=HoUlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-932
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.22 Uplink receive level Value N

Full Name
Uplink receive level Value N
Abbreviation
hoUlLevN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

The larger the value is, the higher is the
accuracy of handover decision, the lower is the realtime; The smaller
the value is, the lower is the accuracy of handover decision, the
higher is the realtime.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoUlLevP<=HoUlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-933
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.23 Downlink receive level Value P

Full Name
Downlink receive level Value P
Abbreviation
hoDlLevP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the value of P that is used for handover
decision due to downlink receive level.
The default value can be set to 15 (-96 dBm to -95 dBm). The parameter
value must be 3 dB greater than the minimum receive level for access
(RxLevAccessMin).
after enough average values are obtained. The downlink receive level is
one of the handover reasons. If P (HoDlLevP) of the latest N (HoDlLevN)
average downlink receive level values are less than the corresponding
threshold (HoDlLevThs), a handover decision is made due to too low
downlink signal level.
The downlink receive level threshold (HoDlLevThs) must be less than
the threshold for downlink power control (increase). When the downlink
receive level is too low, the BSC carries out a power control first. The
Description
handover decision is made only when the power control fails.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


increase.
Change Mode
Offline
2-934
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.24 Downlink receive level Value N

Full Name
Downlink receive level Value N
Abbreviation
hoDlLevN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the value of N that is used for handover
decision due to downlink receive level.
The default value can be set to 15 (-96 dBm to -95 dBm). The parameter
value must be 3 dB greater than the minimum receive level for access
(RxLevAccessMin).
after enough average values are obtained. The downlink receive level is
one of the handover reasons. If P (HoDlLevP) of the latest N (HoDlLevN)
average downlink receive level values are less than the corresponding
threshold (HoDlLevThs), a handover decision is made due to too low
downlink signal level.
The downlink receive level threshold (HoDlLevThs) must be less than
the threshold for downlink power control (increase). When the downlink
receive level is too low, the BSC carries out a power control first. The
Description
handover decision is made only when the power control fails.
Instance
Cell
1..20
2-935
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.25 Uplink receive quality Value P

Full Name
Uplink receive quality Value P
Abbreviation
hoUlQualP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-936
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


increase.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoUlQualP<=HoUlQualN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-937
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.26 Uplink receive quality Value N

Full Name
Uplink receive quality Value N
Abbreviation
hoUlQualN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoUlQualP<=HoUlQualN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-938
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.27 Downlink receive quality Value P

Full Name
Downlink receive quality Value P
Abbreviation
hoDlQualP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the value of P that is used for handover
decision due to downlink receive quality.
after enough average values are obtained. The downlink receive quality
is one of the handover reasons. If P (HoDlQualP) of the latest N
(HoDlQualN) average downlink receive quality values are greater than
the corresponding threshold (HoDlQualThs), a handover decision is
made due to poor downlink signal quality.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


increase.
Change Mode
Offline
Related features
2-939
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
HoDlQualP<=HoDlQualN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.28 Downlink receive quality Value N

Full Name
Downlink receive quality Value N
Abbreviation
hoDlQualN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the value of N that is used for handover
decision due to downlink receive quality.
after enough average values are obtained. The downlink receive quality
is one of the handover reasons. If P (HoDlQualP) of the latest N
(HoDlQualN) average downlink receive quality values are greater than
the corresponding threshold (HoDlQualThs), a handover decision is
made due to poor downlink signal quality.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
2-940
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.29 Uplink receive level of intra-ho Value P

Full Name
Uplink receive level of intra-ho Value P
Abbreviation
intraHoUlLevP
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter indicates the value of P that is used for intra-handover
decision due to uplink receive level. It is used for handover on TCH.
the corresponding threshold (IntraHoUlLevThs), an intra-cell handover
decision is made due to serious uplink (co-frequency) interference.
Description

2-941
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
to 2, so as to ensure the accuracy and rapidness of handover.

If the value is too small, it is very easy to satisfy the condition of
handover decision, handover is too frequent.
If the value is too large, it is very difficult to satisfy the condition of

handover decision.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.30 Uplink receive level of intra-ho Value N

Full Name
Uplink receive level of intra-ho Value N
Abbreviation
intraHoUlLevN
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
2-942
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the value of N that is used for intra-handover

decision due to uplink receive level. It is used for handover on TCH.
the corresponding threshold (IntraHoUlLevThs), an intra-cell handover
decision is made due to serious uplink (co-frequency) interference.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-943
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.31 Downlink receive level of intra-ho Value P

Full Name
Downlink receive level of intra-ho Value P
Abbreviation
intraHoDlLevP
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter specifies the value of P that is used for intra-cell
handover decision due to downlink receive level. It is used for handover
on TCH.
the corresponding threshold (IntraHoDlLevThs), an intra-cell handover
decision is made due to serious downlink (co-frequency) interference.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



handover decision.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-944
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.32 Downlink receive level of intra-ho Value N

Full Name
Downlink receive level of intra-ho Value N
Abbreviation
intraHoDlLevN
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter specifies the value of N that is used for intra-cell
handover decision due to downlink receive level. It is used for handover
on TCH.
the corresponding threshold (IntraHoDlLevThs), an intra-cell handover
decision is made due to serious downlink (co-frequency) interference.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-945
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.33 Distance handover Value P

Full Name
Distance handover Value P
Abbreviation
distanceP
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
then perform handover. The handover is due to MS being out of the cell
service range.
Parameter "DistanceN" defines the relevant N value, and parameter
Description
"DistanceP" defines the relevant P value.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


handover decision.
Change Mode
Offline
2-946
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
N/A
Relationship
This parameter value should be smaller than or equal to DistanceN.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.34 Distance handover Value N

Full Name
Distance handover Value N
Abbreviation
distanceN
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
then perform handover. The handover is due to MS being out of the cell
service range.
Parameter "DistanceN" defines the relevant N value, and parameter
Description
"DistanceP" defines the relevant P value.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-947
SJ-20130408140048-016|2013-07-17(R1.0)

delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
This parameter value should be larger than or equal to DistanceP.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.35 PBGT handover Value P

Full Name
PBGT handover Value P
Abbreviation
pbgtHoP
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter indicates the value P in PBGT handover. In PBGT handover, if there are P values of PBGT in N PBGT satisfying the handover
Description
determination condition, the PBGT handover conditions are satisfied.
Instance
Cell
1..20
Unit
N/A
Default Value
2-948
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value
Usually, if the value is too small, times of
handover attempts and execution will be influenced. The larger the
value is, it is more difficult to perform handover, and the higher

the call drop risk is.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.36 PBGT handover Value N

Full Name
PBGT handover Value N
Abbreviation
pbgtHoN
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter indicated the value N in PBGT handover. In PBGT handover, if there are P values of PBGT in N PBGT satisfying the handover
Description
determination condition, the PBGT handover conditions are satisfied.
Instance
Cell
1..20
Unit
N/A
Default Value
2-949
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.37 Allow intra-Cell handover attempt due to uplink

interference(High Speed)
Full Name
Allow intra-Cell handover attempt due to uplink interference(High Speed)
Abbreviation
hoControlIntfUl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow intra-cell TCH handover due
Description
to uplink interference in the case of high speed.
Instance
Cell
0: No
1: Yes
Unit
N/A
2-950
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

it is advised to enable intra-cell handover
(except for the handover of the single-carrier cell, and network configured
with frequency hopping) to improve the communication quality.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.38 Allow intra-Cell handover attempt due to downlink

interference(High Speed)
Allow intra-Cell handover attempt due to downlink interference(High
Full Name
Speed)
Abbreviation
hoControlIntfDl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
to downlink interference in the case of high speed.
Instance
Cell
This parameter determines whether to allow intra-cell TCH handover due
0: No
1: Yes
Unit
N/A
2-951
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
based on actual scene setting

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.39 Allow handover due to distance(High Speed)

Full Name
Allow handover due to distance(High Speed)
Abbreviation
hoControlDistance_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow handover due to distance(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

2-952
SJ-20130408140048-016|2013-07-17(R1.0)
Unless otherwise required, this switch should
not be enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.40 Allow standard PBGT handover(High Speed)

Full Name
Allow standard PBGT handover(High Speed)
Abbreviation
hoControlPbgt_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow standard PBGT handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Generally, this switch is disabled.
Change Mode
Offline
2-953
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.41 Allow automatic handover due to traffic(High Speed)

Full Name
Allow automatic handover due to traffic(High Speed)
Abbreviation
hoControlLoad_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow automatic TCH handover
Description
based on traffic in the case of high speed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Due to the practical application of the net.Suggest to close when it
is not used.
Change Mode
Offline
Related features
Related Parameters
N/A
2-954
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.42 Allow intra-cell handover in super TRX channel due to

downlink interference(High Speed)
Allow intra-cell handover in super TRX channel due to downlink interferFull Name
ence(High Speed)
Abbreviation
hoControlIntfUlSTrx_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Allow intra-cell handover in super TRX channel due to downlink interfer-
Description
ence(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-955
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New

uplink interference(High Speed)
Allow intra-cell handover in super TRX channel due to uplink interferFull Name
ence(High Speed)
Abbreviation
hoControlIntfDlSTrx_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Allow intra-cell handover in super TRX channel due to uplink interfer-
Description
ence(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-956
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.44 Allow adjacent cells handover in super TRX channel due

to PBGT(High Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(High
Full Name
Speed)
Abbreviation
hoControlPbgtSTrx_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Allow adjacent cells handover in super TRX channel due to PBGT(High
Description
Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-957
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.45 Allow rapid handover(High Speed)

Full Name
Allow rapid handover(High Speed)
Abbreviation
hoControlRapidLevUl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow rapid handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Uplink rapid attenuation handover is mainly
applied to the rapid attenuation due to fast moving, strong directionality,
and blocking.
Change Mode
Offline
Related features
ZGO-02-02-006 Rapid Level Drop Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-958
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.46 Allow Macro-Micro delay handover(High Speed)

Full Name
Allow Macro-Micro delay handover(High Speed)
Abbreviation
hoControlMacroMicro_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Macro-Micro delay handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

The macro-micro handover is to share traffic of the dual-layer or

multilayer network. Its main application scenario is the dual-frequency

network in urban areas.
If the macro-micro handover delay switch is enabled, congestion can be
eased but the coverage rate will be influenced.
Change Mode
Offline
Related features
ZGO-02-02-001 Handover Between Macro- and Micro-cells
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-959
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.47 Allow Micro-Micro delay handover(High Speed)

Full Name
Allow Micro-Micro delay handover(High Speed)
Abbreviation
hoControlMicroMicro_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Micro-Micro delay handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
2-960
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.24.48 Allow force transfer handover(High Speed)

Full Name
Allow force transfer handover(High Speed)
Abbreviation
hoControlForceMove_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow force transfer handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

In the case of 1800 M and 900 M network sharing site, it is better to
handover subscribers of 900 M network to 1800 M network.At this time,

you can transfer traffic by force.
Change Mode
Offline
Related features
ZGO-02-02-003 Directed-Shift Handover
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-961
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.49 Allow quality handover in uplink(High Speed)

Full Name
Allow quality handover in uplink(High Speed)
Abbreviation
hoControlQualUl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality handover in uplink(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Generally, quality handover in uplink is set
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.50 Allow level handover in uplink(High Speed)

Full Name
Allow level handover in uplink(High Speed)
Abbreviation
hoControlLevUl_H
2-962
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level handover in uplink(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.51 Allow quality handover in downlink(High Speed)

Full Name
Allow quality handover in downlink(High Speed)
Abbreviation
hoControlQualDl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-963
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Allow quality handover in downlink(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.52 Allow level handover in downlink(High Speed)

Full Name
Allow level handover in downlink(High Speed)
Abbreviation
hoControlLevDl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level handover in downlink(High Speed)
Instance
Cell
2-964
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.53 Allow downlink rapid handover(High Speed)

Full Name
Allow downlink rapid handover(High Speed)
Abbreviation
hoControlRapidNLevDl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow downlink rapid handover(High Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
2-965
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

This handover is mainly applied to the high-speed
scenario. This handover algorithm requires the areas along the railway

are covered by sites in link shape, and the adjacent cell has enough
overlapped coverage areas.Handover decisions can be made faster
through
configuring the adjacent cell with the direction attribute, so as
to enhance handover success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.54 Allow C/I limited handover(High Speed)

Full Name
Allow C/I limited handover(High Speed)
Abbreviation
hoControlCINCell_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow C/I limited handover(High Speed)
Instance
Cell
0: No
1: Yes
2-966
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

Under the turnoff scenario, this function can
be enabled for individual cells in order to prevent the tangential
cross-coverage cell.Generally, this function should not be set.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.55 Allow downlink quality rapid handover(High Speed)

Full Name
Allow downlink quality rapid handover(High Speed)
Abbreviation
hoControlRadpidQDl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-967
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether rapid handover due to downlink quality

is allowed. It is used for handover on TCH.
A call drop may occur due to poor downlink quality after an MS starts a
call or is handed over to a cell in which serious interference exists on
some spots. A rapid handover algorithm is provided for decision-making
of rescue handovers in high-speed scenarios. This algorithm uses
the raw measurement data of downlink quality, applies no window
for neighbor cells, and shares the N value used for other handover
decisions.
The rapid handover due to downlink quality has the lowest priority than
Description
the other supported handover types.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The default value is only enabled for the cell
of poor downlink quality, rather than common cells.
Generally, This switch is enabled only when
downlink quality is poor and strong interference occurs to the cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-968
SJ-20130408140048-016|2013-07-17(R1.0)

interference(Middle Speed)
Allow intra-Cell handover attempt due to uplink interference(Middle
Full Name
Speed)
Abbreviation
hoControlIntfUl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to trigger the intra-cell TCH handover
Description
because of uplink interference in the case of medium speed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-969
SJ-20130408140048-016|2013-07-17(R1.0)

interference(Middle Speed)
Allow intra-Cell handover attempt due to downlink interference(Middle
Full Name
Speed)
Abbreviation
hoControlIntfDl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow the intra-cell TCH handover
Description
due to uplink interference in the case of medium speed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-970
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.58 Allow handover due to distance(Middle Speed)

Full Name
Allow handover due to distance(Middle Speed)
Abbreviation
hoControlDistance_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow handover due to distance(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
not be enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.59 Allow standard PBGT handover(Middle Speed)

Full Name
Allow standard PBGT handover(Middle Speed)
Abbreviation
hoControlPbgt_M
2-971
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow standard PBGT handover(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.60 Allow automatic handover due to traffic(Middle Speed)

Full Name
Allow automatic handover due to traffic(Middle Speed)
Abbreviation
hoControlLoad_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-972
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to allow automatic TCH handover

Description
based on traffic in the case of medium speed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
is not used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New

downlink interference(Middle Speed)
ence(Middle Speed)
Abbreviation
hoControlIntfUlSTrx_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-973
SJ-20130408140048-016|2013-07-17(R1.0)
Allow intra-cell handover in super TRX channel due to downlink interferDescription
ence(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New

uplink interference(Middle Speed)
ence(Middle Speed)
Abbreviation
hoControlIntfDlSTrx_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-974
SJ-20130408140048-016|2013-07-17(R1.0)
Allow intra-cell handover in super TRX channel due to uplink interferDescription
ence(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New

to PBGT(Middle Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(Middle
Full Name
Speed)
Abbreviation
hoControlPbgtSTrx_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-975
SJ-20130408140048-016|2013-07-17(R1.0)
Allow adjacent cells handover in super TRX channel due to PBGT(Middle

Description
Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.64 Allow rapid handover(Middle Speed)

Full Name
Allow rapid handover(Middle Speed)
Abbreviation
hoControlRapidLevUl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow rapid handover(Middle Speed)
Instance
Cell
2-976
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value

and blocking.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.65 Allow Macro-Micro delay handover(Middle Speed)

Full Name
Allow Macro-Micro delay handover(Middle Speed)
Abbreviation
hoControlMacroMicro_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Macro-Micro delay handover(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
2-977
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.66 Allow Micro-Micro delay handover(Middle Speed)

Full Name
Allow Micro-Micro delay handover(Middle Speed)
Abbreviation
hoControlMicroMicro_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Micro-Micro delay handover(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
0
2-978
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.67 Allow force transfer handover(Middle Speed)

Full Name
Allow force transfer handover(Middle Speed)
Abbreviation
hoControlForceMove_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow force transfer handover(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
2-979
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.68 Allow quality handover in uplink(Middle Speed)

Full Name
Allow quality handover in uplink(Middle Speed)
Abbreviation
hoControlQualUl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality handover in uplink(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
2-980
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.69 Allow level handover in uplink(Middle Speed)

Full Name
Allow level handover in uplink(Middle Speed)
Abbreviation
hoControlLevUl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level handover in uplink(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-981
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.70 Allow quality handover in downlink(Middle Speed)

Full Name
Allow quality handover in downlink(Middle Speed)
Abbreviation
hoControlQualDl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality handover in downlink(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-982
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.71 Allow level handover in downlink(Middle Speed)

Full Name
Allow level handover in downlink(Middle Speed)
Abbreviation
hoControlLevDl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level handover in downlink(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-983
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.72 Allow downlink rapid handover(Middle Speed)

Full Name
Allow downlink rapid handover(Middle Speed)
Abbreviation
hoControlRapidNLevDl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow downlink rapid handover(Middle Speed)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value


through
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-984
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.73 Allow C/I limited handover(Middle Speed)

Full Name
Allow C/I limited handover(Middle Speed)
Abbreviation
hoControlCINCell_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether handover to C/I limited adjacent cell
is supported in intermediate speed scenarios.
Suppose A is a serving cell. B and C are neighbor cells of A. Then B
is a C/I limited neighbor cell of C. If both B and C meet the handover
conditions and C/I threshold crossing occurs, the handover is limited to
the neighbor cell B.
This parameter uses the 24th bit of the HoControl field (DWORD data
type).
Description
This parameter is available in V6.20.21 and later versions.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-985
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.74 Allow downlink quality rapid handover(Middle Speed)

Full Name
Allow downlink quality rapid handover(Middle Speed)
Abbreviation
hoControlRadpidQDl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
is allowed. It is used for handover on TCH.
of rescue handovers in intermediate-speed scenarios. This algorithm
uses the raw measurement data of downlink quality, applies no window
decisions.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
2-986
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New

interference(Low Speed)
Full Name
Allow intra-Cell handover attempt due to uplink interference(Low Speed)
Abbreviation
hoControlIntfUl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the intra-cell TCH handover due to up-
Description
link interference can be performed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
2-987
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

interference(Low Speed)
Allow intra-Cell handover attempt due to downlink interference(Low
Full Name
Speed)
Abbreviation
hoControlIntfDl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow intra-cell handover attempt
Description
due to downlink interference.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

2-988
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.77 Allow handover due to distance(Low Speed)

Full Name
Allow handover due to distance(Low Speed)
Abbreviation
hoControlDistance_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow standard PBGT handover.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
not be enabled.
Change Mode
Offline
2-989
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.78 Allow standard PBGT handover(Low Speed)

Full Name
Allow standard PBGT handover(Low Speed)
Abbreviation
hoControlPbgt_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow handover due to distance.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-990
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.79 Allow automatic handover due to traffic(Low Speed)

Full Name
Allow automatic handover due to traffic(Low Speed)
Abbreviation
hoControlLoad_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow automatic handover based
Description
on traffic.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
is not used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-991
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

downlink interference(Low Speed)
ence(Low Speed)
Abbreviation
hoControlIntfUlSTrx_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow intra-cell handover in super
Description
TRX channel due to downlink interference.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-992
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

uplink interference(Low Speed)
ence(Low Speed)
Abbreviation
hoControlIntfDlSTrx_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
TRX channel due to uplink interference.
Instance
Cell
This parameter determines whether to allow intra-cell handover in super
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-993
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

to PBGT(Low Speed)
Allow adjacent cells handover in super TRX channel due to PBGT(Low
Full Name
Speed)
Abbreviation
hoControlPbgtSTrx_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow adjacent cells handover in
Description
super TRX channel due to PBGT
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-994
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.83 Allow dynamic adjustment of handover priority

Full Name
Allow dynamic adjustment of handover priority
Abbreviation
hoControlPrioChg
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow dynamic adjustment of
handover priority.
Description
This parameter is supported from version 6.20.614b.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
For the network with relatively high handover
congestion, it is recommended to enable this switch.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-995
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.84 Allow rapid handover(Low Speed)

Full Name
Allow rapid handover(Low Speed)
Abbreviation
hoControlRapidLevUl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow rapid handover.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

and blocking.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-996
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.24.85 Allow Macro-Micro delay handover(Low Speed)

Full Name
Allow Macro-Micro delay handover(Low Speed)
Abbreviation
hoControlMacroMicro_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow Macro-Micro delay handover.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-997
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.24.86 Allow Micro-Micro delay handover(Low Speed)

Full Name
Allow Micro-Micro delay handover(Low Speed)
Abbreviation
hoControlMicroMicro_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines if to allow Micro-Micro delay handover.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-998
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.87 Allow force transfer handover(Low Speed)

Full Name
Allow force transfer handover(Low Speed)
Abbreviation
hoControlForceMove_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether to allow forced transfer handover.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-999
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.88 Allow quality handover in uplink(Low Speed)

Full Name
Allow quality handover in uplink(Low Speed)
Abbreviation
hoControlQualUl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether quality handover in uplink is allowed.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.89 Allow level handover in uplink(Low Speed)

Full Name
Allow level handover in uplink(Low Speed)
2-1000
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
hoControlLevUl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether level handover in uplink is allowed.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.90 Allow quality handover in downlink(Low Speed)

Full Name
Allow quality handover in downlink(Low Speed)
Abbreviation
hoControlQualDl_L
Managed Object
Handover Control
2-1001
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether quality handover in downlink is
allowed.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.91 Allow level handover in downlink(Low Speed)

Full Name
Allow level handover in downlink(Low Speed)
Abbreviation
hoControlLevDl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1002
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter describes whether level handover in downlink is allowed.

Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to be allowed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.92 Allow downlink rapid handover(Low Speed)

Full Name
Allow downlink rapid handover(Low Speed)
Abbreviation
hoControlRapidNLevDl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to enable SDCCH downlink rapid
handover.
Description

2-1003
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value


through
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.93 Allow C/I limited handover(Low Speed)

Full Name
Allow C/I limited handover(Low Speed)
Abbreviation
hoControlCINCell_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1004
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether the function of handover for C/I limited
adjacent cell is supported. Suppose A is the service cell, B and C are
adjacent cells of A, and B is the C/I limited adjacent cell of C. If B and
C all satisfy the handover condition and the C/I limited adjacent cell's
handover threshold is also satisfied, then the adjacent cell C should be
filtered during the adjacent cell handover, in other words, C can not be
taken as an adjacent cell for handover.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.94 Allow downlink quality rapid handover(Low Speed)

Full Name
Allow downlink quality rapid handover(Low Speed)
Abbreviation
hoControlRadpidQDl_L
2-1005
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow downlink quality rapid han-
Description
dover.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.95 Synchronism
Full Name
Synchronism
Abbreviation
hoSyncInd
Managed Object
Handover Control
3GPP Name
N/A
2-1006
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates whether synchronous handover to a cell is
allowed.
If the BSC detects that the timing advance of the cell (target cell) is equal
Description
to that of the source cell, synchronous handover to the cell is allowed.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

The default value is used. Usually, synchronization
handover occurs in the common network, so the default value should
be enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.96 Asynchronism
Full Name
Asynchronism
Abbreviation
hoNSyncInd
Managed Object
Handover Control
3GPP Name
N/A
2-1007
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates whether asynchronous handover to a cell is
allowed.
If the BSC fails to obtain the timing advance of the cell (target cell), only
Description
asynchronous handover to the cell is allowed.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

The default value is used. Usually, synchronization
handover occurs in the common network, so the default value should
be enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.97 Pseudo-synchronism
Full Name
Pseudo-synchronism
Abbreviation
hoFSyncInd
Managed Object
Handover Control
3GPP Name
N/A
2-1008
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates whether pseudo-synchronous handover to a
cell is allowed.
If an MS can calculate the timing advance of the cell (target cell) and
the MS supports pseudo-synchronous handover, pseudo-synchronous
Description
handover to the cell is allowed.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
based on field pritical request
Currently, this function is not supported and
is disabled.
Change Mode
Offline
Related features
ZGB-02-02-003 Handover Mode
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.98 Pre-synchronism
Full Name
Pre-synchronism
Abbreviation
hoPSyncInd
Managed Object
Handover Control
3GPP Name
N/A
2-1009
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates whether pre-synchronous handover to a cell
is allowed.
If the BSC obtains the timing advance of the cell (target cell) and
considers the timing advance when sending a handover command,
Description
pre-synchronous handover to the cell is allowed.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
The default value is used, and usually it is
disabled. At present, this function cannot be supported.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.99 Prior layer selecting parameter on signal level/quality

Full Name
Prior layer selecting parameter on signal level/quality
Abbreviation
layerPriority
Managed Object
Handover Control
3GPP Name
N/A
2-1010
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter decides the priority to select and sequence the candidate
cells for handover. Received signal level and signal quality decides the
candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell, then
to those at the same layer, and finally to other adjacent cells;
First hand over to adjacent cells at the same layer of the local cell, then
to those at the upper layer, and finally to other adjacent cells;
All adjacent cells are treated in the same way.
This parameter determines to select one of above three methods.
During handover control process, this parameter has higher priority
than normal adjacent cells.
Value Range:
1 (UPPER_LAYER): adjacent cell at above layer first, same layer
next,other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at same layer first, above layer next,
other adjacent cells finally;
3 (ALL_LAYER): all adjacent cells are same.
Note: In general, micro cell adopts option 1 and macro cell adopts
Description
option 2.
Instance
Cell
1: UPPER_LAYER
2: SAME_LAYER
3: ALL_LAYER
Unit
N/A
Default Value
Default Value
ThIS Parameter is no longer used. The default
value is kept.
ThIS Parameter is no longer used. The default
value is kept.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1011
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.100 Rapid handover Threshold

Full Name
Rapid handover Threshold
Abbreviation
rapidHoThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
During fast fading handover, some parameters shall be used. If the measured signal intensity of a call is less than rapid handover threshold, then it
triggers handover of existing cell to most probable candidate cell. "RapidHoThs" may be set as 15 (that is, -96dBm ~ -95dBm) by default, the same
Description
as the level threshold of ordinary handover.
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
2-1012
SJ-20130408140048-016|2013-07-17(R1.0)
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
2-1013
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
dBm
Default Value
10
Default Value
experience value
Rapid handover is characterized by fast speed,
so the handover threshold should not be too large. MS will move to
the area with high cell level soon. N value cannot be too large, otherwise
the timeliness of handover judgement will be influenced.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.101 Rapid handover Value N

Full Name
Rapid handover Value N
Abbreviation
rapidHoN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
During fast fading handover, some parameters shall be used. If the
measured signal intensity of a call is less than rapid handover threshold,
then it triggers handover of existing cell to most probable candidate cell.
"RapidHoThs" may be set as 15 (that is, -96dBm ~ -95dBm) by default,
the same as the level threshold of ordinary handover. RapdiHoN counter
defines the minimum times for which the measured signal intensity of
Description
a call is less than the threshold.

2-1014
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
experience value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.102 Handover to same layer other band neighbour cell for

PBGT permitted
Full Name
Handover to same layer other band neighbour cell for PBGT permitted
Abbreviation
pbgtHoLayerSame
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether it is allowed to perform PBGT handover
Description
to the same layer adjacent cell with different frequency band.
Instance
Cell
2-1015
SJ-20130408140048-016|2013-07-17(R1.0)
0..1
Unit
N/A
Default Value
Default Value
Usually, PBGT handover is used at the same
layer.
Usually, PBGT handover is used at the same
layer, so that MS can select a better cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.103 Handover to neighbour cell with no Layer Relation for

PBGT permitted
Full Name
Handover to neighbour cell with no Layer Relation for PBGT permitted
Abbreviation
pbgtHoLayerUndefine
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether it is allowed to perform PBGT handover
Description
to adjacent cell with no layer relationship.
Instance
Cell
0..1
Unit
N/A
2-1016
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
The layer relationship is unclear. PBGT handover
is allowed when MS does not use the layered structure.

Usually, after layers are set for the cell

which needs PBGT handover, set not to perform PBGT handover on the
undefined layer.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.104 Handover to upper layer neighbour cell for PBGT permitted

Full Name
Handover to upper layer neighbour cell for PBGT permitted
Abbreviation
pbgtHoLayerUp
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether the PBGT handover to the upper layer
Description
adjacent cell is allowed.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
This parameter is used to make the lower layer
absorb traffic easily.

2-1017
SJ-20130408140048-016|2013-07-17(R1.0)
Usually, handover to the upper layer adjacent

cell is not allowed.After this function is disabled, the traffic under
special scenario can be shared and congestion can be alleviated, but

the call drop rate and coverage rate may be influenced..
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.105 Handover to under layer neighbor cell for PBGT permitted

Full Name
Handover to under layer neighbor cell for PBGT permitted
Abbreviation
pbgtHoLayerLow
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether the PBGT handover to the lower layer
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Layered structure is not set for the common
network. The value is "No" by default.
2-1018
SJ-20130408140048-016|2013-07-17(R1.0)

Usually, in the layered network, handover to

the lower layer adjacent cell is allowed.If it is not allowed, a negative
impact is brought on the congestion rate under the special scenario.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.106 Penalty time for handover failure

Full Name
Penalty time for handover failure
Abbreviation
hoFailPenalTime
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines the penalty time for destination cell if MS fails
to handover to the destination cell or channel allocation fails during handover. During the penalty time, this parameter is used to perform an offset
Description
on the level of this cell. This parameter determines penality duration.
Instance
Cell
1..255
Unit
N/A
Default Value
14
Default Value
The default value is in accordance with the

preprocessed value. If the preprocessed value 2, the penalty time
is about 7 seconds which is enough for the change of radio environment.
2-1019
SJ-20130408140048-016|2013-07-17(R1.0)

The default value is on the basis of the preprocessed

value. It should be adjusted to a larger value if the preprocessed
value is unavailable.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.107 Difference of dynamic priority

Full Name
Difference of dynamic priority
Abbreviation
dynPrioOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines a tolerable dynamic priority difference between
the destination cell and local cell during a handover when using directionbased handover algorithm. During handover, if the first cells dynamic
handover priority is higher than that of the second cell but the second cell
is in MS moving direction, then the direction-based handover algorithm
works if the difference between the two cells handover priorities is within
Description
the tolerable difference. MS is handover to the second cell.
Instance
Cell
1..7
Unit
N/A
Default Value
2-1020
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value
This parameter affects the priority of the

candidate cell. The larger this parameter is, the greater the priority
difference between to dynamic cells should be, so as to change the
priority of two cells.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.108 PBGT difference

Full Name
PBGT difference
Abbreviation
pbgtOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines a tolerable PBGT difference.During handover, if
the first cells PBGT is higher than that of the second cell but the second
cell is in MS moving direction, then the direction-based handover algorithm works if the difference between the two cells PBGTs is within the
tolerable difference. MS is handover to the second cell. This parameter
Description
indicates this allowable difference.
Instance
Cell
0..20
Unit
dB
2-1021
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
experience value
This parameter affects the priority of the
candidate cell. The larger this parameter is, the greater the power
budget difference between two cells should be, so as to change the

priority of two cells.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.109 Same layer permitted on traffic HO

Full Name
Same layer permitted on traffic HO
Abbreviation
TrafficHoLayerCtl_0
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
be considered as a target cell during traffic handover.
Instance
Cell
This parameter determines whether a neighbor cell of the same layer can
0: not allowed
1: allowed
Unit
N/A
Default Value
1
2-1022
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Usually, traffic handover occurs at the same

layer or the lower layer, so as to save the resources at the upper
layer.
According to the layered network configuration
on site, select the destination layer of traffic handover to alleviate
congestion.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.110 Upper layer permitted on traffic HO

Full Name
Upper layer permitted on traffic HO
Abbreviation
TrafficHoLayerCtl_1
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a neighbor cell of the upper layer can
Description
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
2-1023
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


layer.
congestion.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.111 Lower layer permitted on traffic HO

Full Name
Lower layer permitted on traffic HO
Abbreviation
TrafficHoLayerCtl_2
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a neighbor cell of the lower layer can
Description
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
2-1024
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


layer.
congestion.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.112 Undefined layer permitted on traffic HO

Full Name
Undefined layer permitted on traffic HO
Abbreviation
TrafficHoLayerCtl_3
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a neighbor cell of the unknown layer
Description
can be considered as a target cell during traffic handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
2-1025
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value
layer or the lower layer, to save the resources at the upper

layer.
The undefined layed is applied to the non-hierachical network and can
be set as the target cell of traffic handover as required.


congestion.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.113
Full Name
Abbreviation
TrafficHoFreqCtl_0
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the basic GSM9000 frequencyband (P-GSM) (ARFCN = 1 ~ 124) adjacent cell to be used as the target
Description
cell to which traffic handover is performed.
2-1026
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
In most cases, the GSM900 is applied in target
cells during traffic handover.

According to the frequency band used in the

on-site network, configure the destination frequency band used during
traffic handover, so as to alleviate congestion.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.114 EXT900 frequency band E-GSM permitted on traffic HO

Full Name
EXT900 frequency band E-GSM permitted on traffic HO
Abbreviation
TrafficHoFreqCtl_1
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the basic GSM9000 frequencyband (E-GSM) (ARFCN = 0 ~ 124975 ~ 1023) adjacent cell to be used
Description
as the target cell to which traffic handover is performed.
Instance
Cell
2-1027
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
In few cases, the E-GSM is applied in target


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.115 DCS1800 frequency band permitted on traffic HO

Full Name
DCS1800 frequency band permitted on traffic HO
Abbreviation
TrafficHoFreqCtl_2
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the DCS1800 frequency-band
(DCS1800) (ARFCN = 512 ~ 885) adjacent cell to be used as the target
Description
Instance
Cell
2-1028
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
In few cases, the DCS1800 is applied in target


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.116 PCS1900 frequency band permitted on traffic HO

Full Name
PCS1900 frequency band permitted on traffic HO
Abbreviation
TrafficHoFreqCtl_4
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the PCS1900 frequency-band
(PCS1900) (ARFCN = 512 ~ 810) adjacent cell to be used as the target
Description
Instance
Cell
2-1029
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
In few cases, the GSM1900 is applied in target


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.117 GSM850 frequency band permitted on traffic HO

Full Name
GSM850 frequency band permitted on traffic HO
Abbreviation
TrafficHoFreqCtl_5
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow the GSM850 frequency-band
E-GSM (ARFCN = 128~251) adjacent cell to be used as the target cell to
Description
which traffic handover is performed.
Instance
Cell
2-1030
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
In few cases, the GSM850 is applied in target


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.24.118 Threshold of traffic for handover

Full Name
Threshold of traffic for handover
Abbreviation
trafficThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
If TCH occupation rate of a cell is greater than this parameter value (number of occupied TCH channels / number of total TCH channels, not including blocked idle channels), then it indicates the cell is too busy, and traffic
Description
handover is triggered for the cell.
Instance
Cell
2-1031
SJ-20130408140048-016|2013-07-17(R1.0)
0..100
Unit
Default Value
80
Default Value
It is proper to initiate congestion control
when the cell load reaches 80% and a few channels are available and.

For the cell with fewer channels, channel congestion

occurs easily caused by the burst services, so this parameter can
be set as relatively small.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.119 Traffic handover threshold

Full Name
Traffic handover threshold
Abbreviation
trafficLevThs
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
This parameter is used for traffic handover. For the original handover
condition that adjacent cells level must be higher than that of this cell,
modify it so that adjacent cells level must be higher than this threshold.In
this way, traffic handover can be improved greatly. This threshold must
be less than the PBGT threshold in reverse direction. Otherwise, it may
Description
result in toggle handover.
2-1032
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..48
Unit
dB
Default Value
24
Default Value
Traffic is traffic switching to consider the balance of the target cell level
can not be less than the serving cell

This parameter is valid after automatic handover based on traffic
(HoControl6) is allowed.Note that the threshold of PBGT handover
in the reverse direction of the destination cell needs to be raised for

compensation.
Under the dense traffic scenario, the smaller this parameter is, the
stronger the capability of absorbing traffic of the destination Nclayer
cell or frequency band cell is, the easier the traffic can be handed out
(the traffic threshold shall be reached), which helps alleviate the TCH
channel congestion of the cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.120 Level offset during penalty

Full Name
Level offset during penalty
Abbreviation
penaltyLevOffset
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
2-1033
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used to perform an offset on the downlink level of this

Description
cell in the penalty period.
Instance
Cell
0..63
Unit
dB
Default Value
15
Default Value
The value of field experience

The system allows three times handover failure
to a certain destination cell. When the second or third handover decision
is made, an offset is manually performed on the level of the destination

cell to which handover fails for the first time. If the destination
cell still takes the first priority compared with other adjacent cells
after its level is reduced manually, go on initiating handover to
it. After the attempt fails for three times, shield it in the penalty
period.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.121 Uplink interference quality offset

Full Name
Uplink interference quality offset
Abbreviation
qOffSetUl
Managed Object
Handover Control
3GPP Name
N/A
2-1034
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates that the relationship between the level and
quality determines whether channels are interfered during the inter-cell
handover. When IntraHoUlLevP out of IntraHoUlLevN measurements
satisfy rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition
is satisfied. Where, rxqual-ul is the uplink quality, QOffSetUL is the
uplink quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
Following is the algorithm:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After the occurrence of channel interference is ensured, services should
inform the database about the current channel occupation rate when
Description
applying to the database for appropriate channels.
Instance
Cell
0..20
Unit
N/A
Default Value
10
Default Value
Setting of the default value is in accordance
with the common uplink interference environment.

The larger the value is, the higher the quality
tolerability under the corresponding level is, and it is more difficult
to initiate quality handover which should be adjusted in accordance

with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1035
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.122 Uplink interference level offset

Full Name
Uplink interference level offset
Abbreviation
sOffSetUl
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
handover. When IntraHoUlLevP out of IntraHoUlLevN measurements
satisfy rxqual-ulFQSS (RXLEV_UL+SOffSetUl), the handover condition
is satisfied. Where, rxqual-ul is the uplink quality, QOffSetUL is the
uplink quality offset, AvRxlevUL(n) is the uplink level, SOffSetUL is the
uplink level offset, and FQSS is the current quality offset determined
by the level and the corresponding uplink quality offset (SOffSetUl).
Following is the algorithm:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
Description
Instance
Cell
0..20
Unit
N/A
Default Value
15
Default Value
2-1036
SJ-20130408140048-016|2013-07-17(R1.0)
The larger the value is, the higher the requirement

on quality handover is, and it is more difficult to initiate quality

handover which should be adjusted in accordance with the actual
network
situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.123 Downlink interference quality offset

Full Name
Downlink interference quality offset
Abbreviation
qOffSetDl
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
handover. When IntraHoUlLevP out of IntraHoDlLevN measurements
satisfy rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the
handover condition is satisfied. Where, rxqual-dl is the downlink quality,
QOffSetDL is the downlink quality offset, RXLEV_DL is the downlink
level, SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding downlink
quality offset (SOffSetDl). Following is the algorithm:
Description
255 AvRxlevDL(n) < SOffSetDL + 20
2-1037
SJ-20130408140048-016|2013-07-17(R1.0)
InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <

SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
Instance
Cell
0..20
Unit
N/A
Default Value
10
Default Value
with the common downlink interference environment.


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.124 Downlink interference level offset

Full Name
Downlink interference level offset
Abbreviation
sOffSetDl
Managed Object
Handover Control
2-1038
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
handover. When IntraHoUlLevP out of IntraHoDlLevN measurements
satisfy rxqual-dlFQSS (RXLEV_UL,SOffSetUl,QOffSetUL), the
handover condition is satisfied. Where, rxqual-dl is the downlink quality,
QOffSetDL is the downlink quality offset, RXLEV_DL is the downlink
level, SOffSetDL is the downlink level offset, and FQSS is the current
quality offset determined by the level and the corresponding downlink
quality offset (SOffSetDl). Following is the algorithm:
255 AvRxlevDL(n) < SOffSetDL + 20
InterFQSS= | QOffSetDl + 2 SOffSetDL + 20 AvRxlevDL(n) <
SOffSetDL + 30
| QOffSetDl + 3 SOffSetDL + 30 AvRxlevDL(n) < SOffSetDL + 40
QOffSetDl + 4 SOffSetDL + 40 AvRxlevDL(n)
Description
Instance
Cell
0..20
Unit
dB
Default Value
10
Default Value



network
situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1039
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.125 Invalid intra-handover time

Full Name
Invalid intra-handover time
Abbreviation
tMaxIHo
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
If MS performs handover continuously in the cell, it indicates great
interference in this position and no appropriate channel is available.
In such a case, MS shall be forbidden to perform handover within a
certain time. The judgment method is as follows: If handover occurs
within the invalid intra-handover time, then the previous handover is
considered to have no influence on interference, the counter HoCount
increases by 1 and restart TMaxIHo. If handover occurs after the invalid
intra-handover time, the previous handover is considered valid and clear
the counter to 0.
If the counter value reaches the value of MAX count of invalid
intra-handover parameter, then it indicates not to attempt handover
Description
within a certain period. Perform penalty in intra-cell penalty mode.
Instance
Cell
0..255
Unit
N/A
Default Value
16
Usually, if the handover occurs continuously
Default Value
within 16 measurement reports (or preprocessing reports), it is
considered
as too frequent.
If the time is adjusted as too short, the invalid handover is easily to be
judged as valid handover.
If the time is adjusted as too long, the valid handover is easily to be

judged as invalid handover.
2-1040
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.126 MAX count of invalid intra-handover

Full Name
MAX count of invalid intra-handover
Abbreviation
maxIHo
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
If MS performs handover continuously in the cell, it indicates great
interference in this position and no appropriate channel is available.
In such a case, MS shall be forbidden to perform handover within a
certain time. The judgment method is as follows: If handover occurs
within the invalid intra-handover time, then the previous handover is
considered to have no influence on interference, the counter HoCount
increases by 1 and restart TMaxIHo. If handover occurs after the invalid
intra-handover time, the previous handover is considered valid and clear
the counter to 0.
If the counter value reaches the value of MAX count of invalid
intra-handover parameter, then it indicates not to attempt handover
Description
within a certain period. Perform penalty in intra-cell penalty mode.
Instance
Cell
0..10
Unit
N/A
2-1041
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
The default value is used to make a correct
decision on invalid handover.

If the value is too small, the handover is easily to be judged as invalid

and MS is performed on penalty, which is likely to cause call drop.

If the value is too large, the handover is easily to be judged as invalid
interference handover and the number of invalid handover increases.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.127 MAX path loss threshold on force handover

Full Name
MAX path loss threshold on force handover
Abbreviation
maxLossThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1042
SJ-20130408140048-016|2013-07-17(R1.0)
Forcible handover only aims at a speccified cell. It should satisfy the

following requirements:
1. The tolerable level difference (MaxLevDiff) should be lower than the
PBGT handover threshold in the reverse direction, to avoid ping-pong
handover.
2. The resoureces of the target cell should be lower than the reserved
resource threshold (HoForceResThs), to prevent the target cell from
congestion.
3. The path loss (L) of the MS should be lower than this parameter's
threshold, and the time advance (TA) of the MS should be less than
the maximum time advance (MaxTAThs) of the forcible handover. This
algorithm applies to a dual-band network, and the 900 M/1800 M cell
sharing the same site.
Where, when MaxTAThs is set to 63, the forcible handover is only
determined by the path loss of the MS. When MaxLossThs is set to 150,
the forcible handover is only determined by the time advance of the MS.
The path loss (L) =BS_TXPWR - AV_RXLEV_DL
Where, BS_TXPWR is the transmission power of the carrier where
the occupied timeslot locates, and depends on the carrier's maximum
transmission power, static attenuation power, and power control.
AV_RXLEV_DL is the downlink receiving level.
4. HoForceP (value P for determining forcible handover) out of
HoForceN (value N for determining forcible handover) measurement
Description
reports should satisfy the requirements for the forcible handover.
Instance
Cell
0..150
Unit
N/A
Default Value
110
Default Value
experience value
Forced handover shall meet the following requirements:
Level of the destination cell must be higher than that of the local
cell by MaxLevDiff; available resource of the destination cell must

be higher than the handover reserved resource threshold

HoForceResThs;
the path loss L must be less than MaxLossThs and the TA must be less
than MaxTAThs. The higher the path loss is, the poorer the signal
intensity of the destination cell is, thereby the max path loss threshold
cannot be too large.
Change Mode
Offline
Related features
2-1043
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.128 MAX time advance threshold on force handover

Full Name
MAX time advance threshold on force handover
Abbreviation
maxTaThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
handover.
congestion.
Description
2-1044
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
experience value
Forced handover shall meet the following requirements:
Level of the destination cell must be higher than that of the local
cell by MaxLevDiff; available resource of the destination cell must
be higher than the handover reserved resource threshold
HoForceResThs;
the path loss L must be less than MaxLossThs and the TA must be less
than MaxTAThs. TA value cnnot be too large. The larger the TA value
is, the poorer the cell signal intensity is.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.129 N value of force handover

Full Name
N value of force handover
2-1045
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
hoForceN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
handover.
congestion.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
experience value
NWhen P times in the N times decision succeed,
it is allowed to initiate handover. The smaller the N value and P
value are, it is easier to initiate handover.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1046
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.130 P value of force handover

Full Name
P value of force handover
Abbreviation
hoForceP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
handover.
congestion.
Description
2-1047
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
experience value
NWhen P times in the N times decision succeed,
it is allowed to initiate handover. The smaller the N value and P
value are, it is easier to initiate handover.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.131 Level offset for PBGT to up layer

Full Name
Level offset for PBGT to up layer
Abbreviation
pbgtHoUlLevOffset
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
2-1048
SJ-20130408140048-016|2013-07-17(R1.0)
To more effectively control traffic distribution in the cell at different layers,

while doing PBGT decision, add PBGT decision offset level in the cell at
upper layer within certain duration which is dependent upon the lag time
Description
for handover between different layers.
Instance
Cell
0..48
Unit
N/A
Default Value
24
Default Value
The default is not offset

The value 0-48 represents -24db~+25db. Its function is same as PBGT
Margin. That is, add an inter-layer hysteresis value based on the PBGT
Margin, to attenuate or accelerate inter-layer PBGT handover.

Generally, it is better to handover to the lower layer and maintain

intra-layer handover at the lower layer. The PBGT handover to the upper
layer is triggered only when the upper-layer signal is always strong.
If the value is large, it assists in traffic balance and congestion reduction,
reduces the possibility of PBGT handover to the upper layer, and affects
the coverage rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.132 Level offset for PBGT to low layer

Full Name
Level offset for PBGT to low layer
2-1049
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
pbgtHoDlLevOffset
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
lower layer within certain duration which is dependent upon the lag time
Description
for handover between different layers.
Instance
Cell
0..48
Unit
N/A
Default Value
24
Default Value
The default is not offset

The value 0-48 represents -24db~+25db. It sfunction is the same as
PBGT Margin. That is, add a inter-layer hysteresis value based on the
PBGT Margin, to attenuate or accelerate inter-layer PBGT handover.

Generally, it is better to handover to the lower layer and maintain

intra-layer handover at the lower layer. The PBGT handover to the upper
layer is triggered only when the upper-layer signal is always strong.
If the value is large, it assists in traffic balance and congestion reduction,
reduces the possibility of PBGT handover to the upper layer, and affects
the coverage rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1050
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.133 Lag time for PBGT between different layers

Full Name
Lag time for PBGT between different layers
Abbreviation
pbgtHoLayerHyst
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
different layers within certain duration, which is lag time for PBGT between
Description
different layers.
Instance
Cell
0..300
Unit
Default Value
50
Default Value
experience value
The value will be modified to the default value
(50 s) if it is 0.If the lag time is not timed out, it is necessary
to add offset to the PBGT cross-layer handover.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1051
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.134 The threshold for starting PBGT handover

Full Name
The threshold for starting PBGT handover
Abbreviation
pbgtHoStartThs
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
When the current cell's downlink level is less than the start level threshold
Description
for PBGT handover, the PBGT handover decision is performed.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value

If the value is large, it is easy to initiate PBGT handover. If the value is
small, it is difficult to initiate PBGT handover.
The value should be large when it is necessary to share traffic.
Otherwise, it is difficult to share traffic and the congestion rate is
influenced.
When it is unnecessary to share traffic, the value can be set to a

relatively small value, which reduces the number of unnecessary
handovers but affects the coverage rate.
It is recommended to set the value of the 900 M cell to the largest in the
900 M and 1800 M dual-frequency network.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1052
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.24.135 The priority of the handover from Macro cell to Micro cell
Full Name
The priority of the handover from Macro cell to Micro cell
Abbreviation
macroMicroHoPrio
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether the macro-micro handover decision
Description
has higher priority than the PBGT handover decision.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Generally, the macro-micro handover takes priority
if it is enabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1053
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.136 Handover from macro to micro

Full Name
Handover from macro to micro
Abbreviation
macroMicroStartThs
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
When the current cell's downlink level is less than or equal to the start level
threshold for macro-micro handover, the macro-micro handover decision
Description
is performed.
Instance
Cell
0..63
Unit
N/A
Default Value
63
Default Value

Initially, it is recommended to set this parameter
as the largest, so that the 1800 M cell can absorb more traffic. The

larger this parameter is, it is more likely for the macro-micro handover
to occur, and it is easier for traffic to be transferred to the 1800
cell. Adjustment of this parameter depends on the current condition
and subsequent plan of traffic distribution of the 900 cell and 1800
cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
This parameter is valid unless the macro-micro

switch hocontrol_13is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1054
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.137 Hysteresis timer when traffic handover

Full Name
Hysteresis timer when traffic handover
Abbreviation
trafficHysteresisTm
Managed Object
Handover Control
3GPP Name
None
3GPP Reference
N/A
When there are many traffic handovers initiated in the current cell, the
interval between two traffic handovers must be larger than the hysteresis
Description
time specified by this parameter.
Instance
Cell
0..255
Unit
Default Value
Default Value
NULL
This parameter is invalid in this version and
the default is reserved.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.138 Downlink rapid handover offset of high speed

Full Name
Downlink rapid handover offset of high speed
2-1055
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
dLRapidHoOffsetH
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
After getting a series of measurement reports, you can do the decisions
for SDCCH downlink rapid handover.
The downlink rapid is the reason to cause handover. The decision
process is as follows: do the handover if the latest downlink level
values (without average processing) is higher than the sum of relevant
threshold values and offset values. The handover reason is downlink
rapid handover. DLRapidHoOffset_0 defines the offset threshold value
for downlink rapid handover if the train speed is higher than 250km/hr.
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
experience value
For the threshold under high speed scenario,
rapid handover should be performed, thereby it is better to set the
offset value to a relatively small value to assist in making handover

decisions.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1056
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.139 Downlink rapid handover offset of middle speed

Full Name
Downlink rapid handover offset of middle speed
Abbreviation
dLRapidHoOffsetM
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Downlink rapid handover decisions depend upon a series measurement
reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and the
offset, perform handover with the cause of downlink rapid handover.This
parameter DLRapidHoOffset_1 defines the offset threshold value for
downlink rapid handover if the train speed is between 150km/hr and
250km/hr.
Description
Since the version V6.20.614b, this parameter is supported.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value

with the radio environment that mostly the speed is 150~250km/h under
the high-speed scenario.
The value is applicable to the coverage area under such high-speed
scenarios as express ways, and high-speed railways on which the train
speed is l150~251km/h.
Higher speed requires a smaller offset value to realize a faster handover.
Change Mode
Offline
Related features
ZGO-02-02-018 Handover Based on Downlink Level Fast Fading
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1057
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.140 Downlink rapid handover offset of low speed

Full Name
Downlink rapid handover offset of low speed
Abbreviation
dLRapidHoOffsetL
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
for downlink rapid handover.
Description
for downlink rapid handover if the train speed is lower than 150km/hr.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value

with the radio environment that mostly the speed is lower than 150
km/h under the high-speed scenario.
scenarios as expressways, and high-speed railways on which the train
speed is lower than 150 km/h.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
Related Interfaces
This parameter is valid till the downlink rapid

handover is supported.
N/A
2-1058
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.141 Handover back penalty

Full Name
Handover back penalty
Abbreviation
hoBackPenalty
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This paramter describes the time penalty of handover back to the original
cell. That is, after the handover from cell A to cell B, the handover cannot
Description
be performed back to cell A within this period.
Instance
Cell
0..60
Unit
Default Value
Default Value
Setting of the default value needs to avoid

the increase of handover frequency resulting from toggle handover,
and to avoid call drops as much as possible.
If the value is too small, it is easy to perform backward handover to the
original cell, toggle handover occurs.
If the value is too large, it is not easy to perform backward handover to

the original cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1059
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.142 MIN interval between inter-cell emergency handover

Full Name
MIN interval between inter-cell emergency handover
Abbreviation
HoMinIntervalEmerg
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the interval value for which MS waits before
affects only the emergent inter-cell handover, but not common intra-cell
Description
or inter-cell concentric handover.
Instance
Cell
0..31
Unit
Default Value
Default Value

Change Mode
If ther emergency handover is not performed,

call drop occurs easily, thereby handover is initiated only if the
requirement is satisfied by default.
Frequent handover can be avoided by adjusting
this parameter.If the value is adjusted as too large, call drop occurs
due to handover failure.
Offline
2-1060
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.143 Handover back penalty after emergency handover

Full Name
Handover back penalty after emergency handover
Abbreviation
HoBackPenaltyEmerg
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes the time limit for handover back to the original
cell. In other words, after emergent handover is performed from cell A
to cell B, it is not allowed to perform handover from cell B back to cell A
Description
within the time limit.
Instance
Cell
0..60
Unit
Default Value
15
Default Value
Setting of the default value needs to avoid

the increase of handover frequency resulting from toggle handover,
and to avoid call drops as much as possible.
If the value is too small, it is easy to perform backward handover to the
original cell, toggle handover occurs.
If the value is too large, it is not easy to perform backward handover to

the original cell.
2-1061
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.144 Neighbour cell for emergency handover

Full Name
Neighbour cell for emergency handover
Abbreviation
NCellWindowEmerg
Managed Object
Handover Control
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
This parameter indicates the size of the window used for calculating the
average value of signal strength of the neighbour cell with emergent
Description
handover. The size is the number of samples used in averaging.
Instance
Cell
1..20
Unit
N/A
Default Value
2-1062
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value
as early as possible to avoid call drop when the signal is poor during
communication.


delays.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.145 Downlink rapid quality drop THS

Full Name
Downlink rapid quality drop THS
Abbreviation
DLQualRapidHoThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold of downlink rapid quality drop.
Description
Instance
Cell
8..70
Unit
N/A
2-1063
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
60
Default Value
experience value
The smaller is the threshold and value N, the
easier is the quality handover, the easier is the handover of MS out
of poor quality cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.146 Downlink rapid quality drop Value N

Full Name
Downlink rapid quality drop Value N
Abbreviation
DLQualRapidHoN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the value N of downlink rapid quality drop.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
experience value
2-1064
SJ-20130408140048-016|2013-07-17(R1.0)

The smaller is the threshold and value N, the

easier is the quality handover, the easier is the handover of MS out
of poor quality cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.147 Quality weight of recent measure value

Full Name
Quality weight of recent measure value
Abbreviation
QualityAverageWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The quality weight of measurement report is represented by 20
parameters. The average uplink quality and average downlink
quality use this group of parameters.The first parameter indicates
the weight of the latest measurement report.For example, if quality
weight is 100, 80, 60, or 40, and the quality average window size is 4,
QAVG=(Q1*100+Q2*80+Q3*60+Q4*40)/(100+80+60+40) (Q1 is the
Description
latest measurement value of quality) when quality is averaged.
Instance
Cell
1..100
Unit
N/A
[100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,1
Default Value
00,100,100,100]
2-1065
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The default value uses the same weight.

The latest measurement report is set as the
larger weight. The handover success rate, call drops due to handover,
and RQ reflect the effect of parameter setting.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.148 Level weight of recent measurement value level

Full Name
Level weight of recent measurement value level
Abbreviation
LevelAverageWeight
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes the level weight of recent Nth measurement
Description
value.
Instance
Cell
1..100
Unit
N/A
[100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,100,1
Default Value
00,100,100,100]
2-1066
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
This parameter is newly added in the 61 version.

All levels keep the same weight by default so that the handover index
does not fluctuate before and after upgrade.
If necessary, it is recommended to adjust the
weight of the latest level to the highest.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.149 The load of HO from FR to HR(V3)

Full Name
The load of HO from FR to HR(V3)
Abbreviation
frtoamrhrholoadthr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a load threshold for initiating FR/HR (V3)
handover. When the load of a cell reaches the threshold, an FR/HR (V3)
handover is initiated to obtain more channel resources and improve
the system capacity.
This threshold must be equal to or less than FrToHrHoLoadThr.
Load formula: LOAD = Number of busy channels in the cell
Description
100/(Number of busy channels + Number of idle channels)
Instance
Cell
20..100
Unit
%
2-1067
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
80
When the cell load reaches 80%, the cell is
regarded as a busy cell. In this case, handover from FR to HR (V3)
can be performed to enhance system capacity.
This parameter is valid only when the FRTHRHOSupport switch is

enabeld in the cell.

The larger the value is, the higher is the cell load required for initiating
FR->HR(V3) handover, and the ;less is the opportunity for handover.
If the value is too small, the number of intra-cell handovers increases.
Change Mode
Offline
Related features
ZGO-03-02-013 Dynamic FR/HR Adjustment
Related Parameters
FRTHRHOSupport
FrToHrHoLoadThr
Relationship
enabled in the cell.

FrToHrHoLoadThr>=FrToAmrHrHoLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
2.24.150 The load of HO from FR to HR(V1)

Full Name
The load of HO from FR to HR(V1)
Abbreviation
frtohrholoadthr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1068
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies a load threshold for initiating FR/HR (V1)

handover. When the load of a cell reaches the threshold, an FR/HR (V1)
handover is initiated to obtain more channel resources and improve
the system capacity.
This threshold must be equal to or greater than FrToAmrHrHoLoadThr.
Load formula: LOAD = Number of busy channels in the cell
Description
100/(Number of busy channels + Number of idle channels)
Instance
Cell
20..100
Unit
Default Value
90
Default Value
When the cell load reaches 80%, the cell is

regarded as a busy cell. In this case, handover from FR to HR (V1)
can be performed to enhance system capacity.

enabeld in the cell.

The larger the value is, the higher is the cell load required for initiating
FR->HR(V1) handover, and the less is the opportunity for handover.
If the value is too small, the number of intra-cell handovers increases.
Change Mode
Offline
Related features
Related Parameters
FRTHRHOSupport
FrToAmrHrHoLoadThr
Relationship

FrToHrHoLoadThr>=FrToAmrHrHoLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2-1069
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.151 The quality of HO from FR to HR

Full Name
The quality of HO from FR to HR
Abbreviation
frhoquathr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the cell load reaches a certain level, handover from FR to HR
should be initiated, so as to get more channel resources and enhance
system capacity. However, the quality of the chosen FR call must meet a
certain requirement.
This parameter determines the quality threshold for initiating handover
from FR to HR.
The value of this parameter should be smaller than that of HrHoQuaThr
Description
or AmrHrHoQuaThr.
Instance
Cell
0..70
Unit
N/A
Default Value
10
The voice quality must meet a certain requirement
Default Value
after handover from FR to HR. Therefore, this parameter can be
configured
to a relatively small value.
The lower the threshold, the higher the requirement
on quality.
Change Mode
Offline
Related features
Related Parameters
FRTHRHOSupport
AmrHrHoQuaThr
HrHoQuaThr
Relationship

HrHoQuaThr>FrHoQuaThr
AmrHrHoQuaThr>FrHoQuaThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1070
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2.24.152 The quality of HO from HR(V1) to FR

Full Name
The quality of HO from HR(V1) to FR
Abbreviation
hrhoquathr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a quality threshold for initiating intra-cell HR
(V1)/FR handover. If the speech quality during an HR call is too poor,
an intra-cell HR (V1)/FR handover can be initiated although the other
handover conditions are not met.
Description
This threshold must be greater than FrHoQuaThr.
Instance
Cell
8..70
Unit
N/A
Default Value
39
Default Value
The voice quality is acceptable if it is higher

than this threshold. If it is less than this threshold, handover should
be initiated to improve user experience.
The larger the HrHoQuaThr parameter is, the higher is the tolerbility for
the quality error bit rate of HR services, the smaller is the possibility of
initiating HR(V1)->FR quality handover.
The smaller the HrHoQuaThr parameter is, the lower is the tolerbility for
the quality error bit rate of HR services, the larger is the possibility of
Change Mode
Offline
Related features
Related Parameters
HRTFRHOSupport
FrHoQuaThr
2-1071
SJ-20130408140048-016|2013-07-17(R1.0)

Relationship

HrHoQuaThr>=FrHoQuaThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2.24.153 The quality of HO from HR(V3) to FR

Full Name
The quality of HO from HR(V3) to FR
Abbreviation
amrhrhoquathr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a quality threshold for initiating intra-cell HR
(V3)/FR handover. If the speech quality during an AMR HR call is too
poor, an intra-cell HR (V3)/FR handover can be initiated although the
other handover conditions are not met.
Description
This threshold must be greater than FrHoQuaThr.
Instance
Cell
8..70
Unit
N/A
Default Value
39
Default Value
The voice quality is acceptable if it is higher

than this threshold. If it is less than this threshold, handover should
be initiated to improve user experience.
2-1072
SJ-20130408140048-016|2013-07-17(R1.0)
The larger the AmrHrHoQuaThr parameter is, the higher is the tolerbility
for the quality error bit rate of HR services, the smaller is the possibility
of initiating HR(V3)->FR quality handover.

The smaller the AmrHrHoQuaThr parameter is, the lower is the tolerbility
for the quality error bit rate of HR services, the larger is the possibility of
Change Mode
Offline
Related features
Related Parameters
HRTFRHOSupport
FrHoQuaThr
Relationship

AmrHrHoQuaThr>FrHoQuaThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2.24.154 P value of load and quality handover

Full Name
P value of load and quality handover
Abbreviation
loadandqualhop
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
For the handovers between FR and HR caused by load and quality
changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
This parameter value should be smaller than or equal to
Description
LoadAndQualHoN.
Instance
Cell
2-1073
SJ-20130408140048-016|2013-07-17(R1.0)
1..20
Unit
N/A
Default Value
Default Value


handover decision.
Change Mode
Offline
Related features
Related Parameters
FRThrHoSupport,
LoadAndQualHoN
This parameter takes effect until the FR->HR switch based on load is
Relationship
enabled.
This parameter value should be smaller than or equal to
LoadAndQualHoN.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.155 N value of load and quality handover

Full Name
N value of load and quality handover
Abbreviation
loadandqualhon
Managed Object
Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
2-1074
SJ-20130408140048-016|2013-07-17(R1.0)
For the handovers between FR and HR caused by load and quality

changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
Description
This parameter value should be larger than or equal to LoadAndQualHoP.
Instance
Cell
1..21
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
FRThrHoSupport,
LoadAndQualHoP
This parameter takes effect until the FR->HR switch based on load is
Relationship
enabled.
This parameter value should be larger than or equal to LoadAndQualHoP.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1075
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.156
by interference
Full Name
by interference
Abbreviation
InterfHoPenalTime
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the penalty time of the interference handover
in a cell, including the penalty for handover failure and continuous intra-
Description
cell handovers.
Instance
Cell
1..255
Unit
N/A
Default Value
7
If the pre-processed measurement reports are
Default Value
used for pre-processing, this parameter is configured to 7. In this

case, the penalty time is long enough. If common measurement reports
are used, the value of this parameter should be configured to a larger
value.
Setting of this parameter should be in consideration of the pre-processing
period for measurement reports. If the value is too small, failure or invaid
handover is prone to occur continuously.

If the value is too large, intra-cell handover may not be performed timely.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1076
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.24.157 Interference band requirement for intracell handover

caused by interference
Interference band requirement for intracell handover caused by interferFull Name
ence
Abbreviation
InterfBandforHo
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the maximum interference band required by
the intra-cell interference handover. If a channel does not meet this interference band (the value of interference band is not larger than the value
Description
of this parameter), the intra-cell handover cannot be implemented.
Instance
Cell
1..5
Unit
N/A
Default Value
2
If the value of interference band is not larger
Default Value
than 2, it indicates that the interference in this channel is small
enough. In this case, the channel can be used for intra-cell interference
handover.
Usually, the value of this parameter is not
modified. If this parameter is configured to a large value, the handover
success rate will be affected. If this parameter is configured to

a small value, no channel is allocated during intra-cell handover.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1077
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.24.158 Prefer layer for traffic handover

Full Name
Prefer layer for traffic handover
Abbreviation
TrafficHoPreferLayer
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines the preferred layer during traffic handover.
Instance
Cell
0:Preferred when the adjacent cell and the local cell are on the same
layer
1:Preferred when the adjacent cell is on the upper layer of the local cell
2:Preferred when the adjacent cell is on the lower layer of the local cell
3:Preferred when the adjacent cell is on an undefined layer
255:No preferred layer
Unit
N/A
Default Value
255
Default Value
The preferred layer and value are configured
according to the network condition. By default, this function is disabled.

It is required to configure a preferred layer

during traffic handover according to the network condition. Usually,

the system is prior to switch the traffic to the layer with low traffic.
In most cases, the layer is a lower layer or same layer for absorbing
traffic.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1078
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.24.159 PBGT offset of prefer layer for traffic handover

Full Name
PBGT offset of prefer layer for traffic handover
Abbreviation
TrafficHoLayerOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the specific value for the preferred layer during
Description
traffic handover.
Instance
Cell
0..48
Unit
dB
Default Value
24
Default Value
The preferred layer and value are configured
according to the network condition. By default, this function is disabled.

PBGT offset indicates the priority of the preferential layer. The larger
the offset is, the easier is to queue up at the front. Whereas, the value
should not be too large, to avoid handover to the cell with poor signal.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1079
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.24.160 Prefer band for traffic handover

Full Name
Prefer band for traffic handover
Abbreviation
TrafficHoPreferBand
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the preferred frequency band during traffic
Description
handover.
Instance
Cell
0: P-GSM Preferred
1: E-GSM Preferred
2: DCS1800 Preferred
4: GSM1900 Preferred
7: GSM850 Preferred
255: No Prefer
Unit
N/A
Default Value
255
Default Value
The preferred frequency band and value are

configured according to the network condition. By default, this function
is disabled.
It is required to configure a preferred layer

during traffic handover according to the network condition. Usually,

the system is prior to switch the traffic to the layer with low traffic.
In most cases, the layer is a lower layer or same layer for absorbing
traffic.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1080
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.24.161 PBGT offset of prefer band for traffic handover

Full Name
PBGT offset of prefer band for traffic handover
Abbreviation
TrafficHoBandOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the specific value for the preferred frequency
Description
band during traffic handover.
Instance
Cell
0..48
Unit
Db
Default Value
24
Default Value

The preferred frequency band and value are

configured according to the network condition. By default, this function
is disabled.
PBGT offset indicates the priority of the preferential layer. The larger
the offset is, the easier is to queue up at the front. Whereas, the value
should not be too large, to avoid handover to the cell with poor signal.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1081
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.24.162 The threshold for starting Downlink Rapid handover

Full Name
The threshold for starting Downlink Rapid handover
Abbreviation
DLRapidHoStartThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the threshold of TCH downlink level in the
case of rapid handover. Downlink level rapid handover is a new handover algorithm for the high-speed railway scenario. In this scenario, it is
required to configure different offsets for high, medium, and low speeds to
adapt to rapid attenuation of the downlink level. In addition, handover is
Description
only triggered between cells in the dedicated high-speed railway network.
Instance
Cell
0..63
Unit
N/A
Default Value
63
Default Value

to 63 by default. Only when downlink rapid handover is enabled, the
system will implement handover judgment for adjacent cells.
according to the network planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1082
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.163 High speed threshold

Full Name
High speed threshold
Abbreviation
HighSpeedThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a subscriber moves at high speed. If
the moving speed of a subscriber is larger than this threshold, the system
Description
considers this scenario as a high-speed scenario.
Instance
Cell
0..255
Unit
N/A
Default Value
25
Default Value
According to experienced values, the system

considers a scenario as a high-speed scenario if the moving speed
of a subscriber is faster than 250 km/h.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-1083
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.164 Middle speed threshold

Full Name
Middle speed threshold
Abbreviation
MidSpeedThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a subscriber moves at medium
speed. If the moving speed of a subscriber is larger than this threshold,
Description
the system considers this scenario as a medium-speed scenario.
Instance
Cell
0..255
Unit
N/A
Default Value
15
Default Value
According to experienced values, the system

considers a scenario as a medium-speed scenario if the moving speed
of a subscriber is faster than 150 km/h.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1084
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.165 The minimum interval of direction handover

Full Name
The minimum interval of direction handover
Abbreviation
DirHoMinInterval
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
To prevent an MS, which is handed over to a cell during a previous
directional handover, from being immediately handed over to another cell
(usually occurring in boundary regions between two cells), the system
defines this parameter to avoid frequent handovers between cells and
impacts on communication quality and system performance.
This parameter specifies a time interval. An additional handover of an
MS is allowed only when the time since the previous handover is longer
than this interval. This parameter only influences inter-cell handovers. It
does not affect intra-cell handovers or intra-cell concentric handovers.
Description
The default parameter value can be set to 5.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
experience value
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1085
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.166 The ncell offset for downlink rapid handover

Full Name
The ncell offset for downlink rapid handover
Abbreviation
DLRapidHoNcellOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The current scenario is a high-speed scenario or the last handover is a
handover with specific direction.
When the system performs sorting in the target cell, with this offset,
handover to the adjacent cell configured as a high-speed dedicated
Description
network cell is easier.
Instance
Cell
0..60
Unit
N/A
Default Value
24
Default Value
The meaning of 24 is the same as that of 0.

This parameter is currently not used and will be configured in the
future according to network planning.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1086
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.167 The offset of ncell in the same direction

Full Name
The offset of ncell in the same direction
Abbreviation
SameDirNcellOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The last handover is a handover with specific direction. When the system
performs sorting in the target cell, with this offset, handover to the target
Description
cell with the same direction as that of the handover is easier.
Instance
Cell
0..60
Unit
N/A
Default Value
24
Default Value
The meaning of 24 is the same as that of 0.

This parameter is currently not used and will be configured in the
future according to network planning.
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1087
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.168 Allow signal quality handover on TCH(High speed)

Full Name
Allow signal quality handover on TCH(High speed)
Abbreviation
BepHoControl_H
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
This is a newly-added handover function that may be overlapped with
the downlink quality handover.

The value is set and adjusted as required.
Change Mode
Offline
Related features
N/A
Related Parameters
MeanBEPHoThs,MeanBEPHoP,MeanBEPHoN,CVBEPHoThs,CVBEPHoP,CVBEPHoN
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1088
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.169 Allow signal quality handover on TCH(Middle speed)

Full Name
Allow signal quality handover on TCH(Middle speed)
Abbreviation
BepHoControl_M
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1089
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.24.170 Allow signal quality handover on TCH(Low speed)

Full Name
Allow signal quality handover on TCH(Low speed)
Abbreviation
BepHoControl_L
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1090
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.171 Handover Threshole of Mean Bit Error Probability on TCH

Full Name
Handover Threshole of Mean Bit Error Probability on TCH
Abbreviation
MeanBEPHoThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Threshole of Mean Bit Error Probability on TCH
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

Adjust in accordance with network environment
Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.172 Handover P Number of Mean Bit Error Probability on TCH

Full Name
Handover P Number of Mean Bit Error Probability on TCH
Abbreviation
MeanBEPHoP
Managed Object
Handover Control
2-1091
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover P Number of Mean Bit Error Probability on TCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

It is recommended that this parameter be not adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl,MeanBEPHoN
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.173 Handover N Number of Mean Bit Error Probability on TCH

Full Name
Handover N Number of Mean Bit Error Probability on TCH
Abbreviation
MeanBEPHoN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover N Number of Mean Bit Error Probability on TCH
Instance
Cell
2-1092
SJ-20130408140048-016|2013-07-17(R1.0)
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl,MeanBEPHoP
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.174 Handover Threshole of CV Bit Error Probability on TCH

Full Name
Handover Threshole of CV Bit Error Probability on TCH
Abbreviation
CVBEPHoThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Threshole of CV Bit Error Probability on TCH
Instance
Cell
0..7
Unit
N/A
Default Value
2-1093
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.175 Handover P Number of CV Bit Error Probability on TCH

Full Name
Handover P Number of CV Bit Error Probability on TCH
Abbreviation
CVBEPHoP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover P Number of CV Bit Error Probability on TCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

2-1094
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl,CVBEPHoN
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.176 Handover N Number of CV Bit Error Probability on TCH

Full Name
Handover N Number of CV Bit Error Probability on TCH
Abbreviation
CVBEPHoN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover N Number of CV Bit Error Probability on TCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
BepHoControl,CVBEPHoP
Relationship
P<N
2-1095
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.177 If support intra-handover from FR to HR due to high load

Full Name
If support intra-handover from FR to HR due to high load
Abbreviation
frTHrHoSupport
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
It indicates if FR->HR handover based on load is supported, When the
load of a cell increases, handover can be applied to improve the utilization
Description
ratio of the radio channel.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

When the cell needs to enable FR->HR handover, enable this switch.
This function is able to improve the utilization of radio channels when
the cell load is increased.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1096
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2.24.178 If support intra-handover from HR to FR due to bad quality

Full Name
If support intra-handover from HR to FR due to bad quality
Abbreviation
hrTFrHoSupport
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to support HR-FR handover based
on quality. In the case of poor HR voice quality, the HR-FR handover can
Description
be triggered to improve voice quality.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

When HR-FR handover is required for a cell,
enable this switch. Poor HR voice quality can be improved by the
handover
to FR channel.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1097
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
None
2.24.179 Is Dual-Frequency Traffic Handover Support

Full Name
Is Dual-Frequency Traffic Handover Support
Abbreviation
DualFreqHoSup
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to switch to the dual-frequency traffic
Description
mode.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The switch is disabled normally.
Enable this switch if related cells associated with the dual-frequency
network are configured and these cells are used to absorb traffic.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1098
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.180 Dual-Frequency Handover Parameter N

Full Name
Dual-Frequency Handover Parameter N
Abbreviation
DualFreqHoN
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the N value for a dual-frequency network handover.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
To ensure the handover stability and reliability

Set a lower value to quicken the decision making process.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1099
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.181 Dual-Frequency Handover Parameter P

Full Name
Dual-Frequency Handover Parameter P
Abbreviation
DualFreqHoP
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the P value for a dual-frequency handover.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
To ensure the handover stability and reliability

Set a lower value to quicken the decision making process.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1100
SJ-20130408140048-016|2013-07-17(R1.0)
2.24.182 Dual-Frequency Handover TA Threshold

Full Name
Dual-Frequency Handover TA Threshold
Abbreviation
DualFreqHoTAThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the threshold of dual-frequency handover TA.
Instance
Cell
0..63
Unit
N/A
Default Value
63
Default Value
Normally, the related cell in the dual-frequency network has a similar
coverage with the local cell.
Set a lower value if the coverage of the related cell is smaller than the
local cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.183 Dual-Frequency Handover RxLevel Threshold

Full Name
Dual-Frequency Handover RxLevel Threshold
Abbreviation
DualFreqHoDLThs
Managed Object
Handover Control
2-1101
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the threshold of dual-frequency handover level.
Instance
Cell
0..63
Unit
N/A
Default Value
30
Default Value
The level to ensure proper operation of a cell
Set a higher threshold if the QoS is not improved after the handover to
sub-cell 1.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.184 Circuit data handover control

Full Name
Circuit data handover control
Abbreviation
CSDATAHOControl
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether handover is allowed for CS data traf-
Description
fic.
2-1102
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Handover is allowed normally.

Disable this parameter if CS data services are affected by the handover.
Change Mode
Offline
Related features
N/A
Related Parameters
vsDataGBssFunction.CSDATAHOControl
Relationship
Handover can be done only if
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.185 Back to Source Cell when PBGT Handover

Full Name
Back to Source Cell when PBGT Handover
Abbreviation
PBGTHoBacktoSource
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
For a PBGT handover, this parameter determines whether only levels
meeting the requirement are allowed for HO Access. If the level does
not meet the requirement, the system does not send a PHY Info message, and sends the handover failure message for the MS to return to the
Description
source channel.
2-1103
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Not supported by default

Enable this parameter when required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.186
Handover
Full Name
Handover
Abbreviation
OtherHoBacktoSource
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1104
SJ-20130408140048-016|2013-07-17(R1.0)
For non-PBGT handovers, this parameter determines whether only levels

meeting the requirement are allowed for HO Access. If the level does not
meet the requirement, the system does not send the PHY Info, and sends
Description
the handover failure message for the MS to return to the source channel.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Not supported by default

Enable this parameter when required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.187 HoAccess Require Rxlevel offset

Full Name
HoAccess Require Rxlevel offset
Abbreviation
HoAccessReqLevOffset
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1105
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the offset for calculating the level required for handover access. The calculation formula is 110- TargetAverageRxLevel +
Description
LinkBalance + (HoAccessReqLevOffset -35).
Instance
Cell
0..70
Unit
N/A
Default Value
45
Default Value
Default: 10 db

Set a greater value if a lower handover detection level is required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.188
Full Name
Abbreviation
OtherHoAccessLevSel
Managed Object
Handover Control
3GPP Name
N/A
2-1106
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
For non-PBGT handovers, this parameter sets the strategy used for selecting the levels required by handover access. The minimum receiving level or (110- TargetAverageRxLevel + LinkBalance + (HoAccessRe-
Description
qLevOffset -35)) can be selected.
Instance
Cell
1:Expected uplink level
2:Minimum allowed access level
Unit
N/A
Default Value
Default Value
Default: strategy 1

Use strategy 2 if strategy 1 leads to deteriorated SD indexes.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.189 Dual-Frequency Traffic Handover Threshold

Full Name
Dual-Frequency Traffic Handover Threshold
Abbreviation
DualFreqOverLoadThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-1107
SJ-20130408140048-016|2013-07-17(R1.0)
If related cells are configured, when the cell load is greater than the parameter value and the related cell is lower than the parameter value, the
Description
system makes a dual-frequency traffic handover decision.
Instance
Cell
0..100
Unit
Default Value
70
Default Value
Empirical value
Set a higher threshold if better level is expected after handover to the
related cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.190 Support handover from HR to FR due to low load

Full Name
Support handover from HR to FR due to low load
Abbreviation
HRTFRHOSupport2
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Enables/Disables the HR-FR handover function (HR includes HR (v1) and
Description
HR (V3)).
Instance
Cell
2-1108
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Generally this function is disabled.
A HR-FR handover can be enabled to improve the conversation quality
when the load of a cell is lowered.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
V1
to FR
2.24.191 The load of HO from HR
Full Name
The load of HO from HRV1 to FR
Abbreviation
HrToFrHoLoadThr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Load (low threshold) of a cell that triggers an HR (V1)-FR handover.
Instance
Cell
0..100
Unit
2-1109
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
30
The parameter value is determined by the user experience and the load
on a channel. For example, if the load on a channel is lower than 30, the
full rate mode can be applied to improve the user experience.
After a handover to the FR mode, the load on the current channel is

increased, and it is possible to reach the load threshold triggering a

handover to the dynamic HR mode. This parameter must be set to a
value that can not only improve the user experience, but also avoid
frequent handovers.
Change Mode
Offline
Related features
Related Parameters
AmrHrToFrHoLoadThr
In the same cell, AmrHRThs >HrToFrHoLoadThr>= AmrHrToFrHoLoad-
Relationship
Thr
FrToHrHoLoadThr> HrToFrHoLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
V3
to FR
2.24.192 The load of HO from HR
Full Name
The load of HO from HRV3 to FR
Abbreviation
AmrHrToFrHoLoadThr
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Load (low threshold) of a cell that triggers an HR (V3)-FR handover.
Instance
Cell
0..100
2-1110
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
Default Value
20
Default Value
AMR full rate mode can be applied to improve the user experience.
After a handover to the AMR FR mode, the load on the current channel

is increased, and it is possible to reach the load threshold triggering a

frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HrToFrHoLoadThr
In the same cell, AmrHRThs >HrToFrHoLoadThr>= AmrHrToFrHoLoad-
Relationship
Thr
FrToAmrHrHoLoadThr> AmrHrToFrHoLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.193 HR to FR handover downlink level start threshold

Full Name
HR to FR handover downlink level start threshold
Abbreviation
HrToFrHoStartThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Electricity level threshold that triggers an HR-FR handover.
Instance
Cell
2-1111
SJ-20130408140048-016|2013-07-17(R1.0)
0..63
Unit
N/A
Default Value
35
Default Value
The default value is set in accordance with the past experience.
The HR-FR handover is unlikelier to be performed if the parameter value
is higher, and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoDlLevP <= HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.194 FR to HR handover downlink level start threshold

Full Name
FR to HR handover downlink level start threshold
Abbreviation
FrToHrHoStartThs
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Electricity level threshold that triggers an FR-HR handover.
Instance
Cell
0..63
Unit
N/A
Default Value
35
2-1112
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The default value is set in accordance with the past experience.
The FR-HR handover is unlikelier to be performed if the parameter value
is higher, and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
HoUlQualP <= HoUlQualN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.195 Back to Source Cell when MSC Controlled Incoming

Handover
Full Name
Back to Source Cell when MSC Controlled Incoming Handover
Abbreviation
MSCHoInHoBack2Source
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Enables/Disables the back-to-source-cell function when TCH incoming
Description
handover is performed.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
This function is enabled to when the call drop rate is high at he field. By
default this parameter is set to 0.

2-1113
SJ-20130408140048-016|2013-07-17(R1.0)
This function is enabled when the call drop rate at the field is high.
During the process of handover in from the external, the source cell
is not informed when an MS is handed-over back to its source cell,
therefore, the handover indexes of the source cell may be affected.
Generally back-to-source-cell function is recommended to be disabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.24.196 Good level and bad quality handover DL Level

Full Name
Good level and bad quality handover DL Level
Abbreviation
GoodLevBadRQHoDLLev
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The system triggers the high level and bad quality handover when the down-
Description
link level of this cell is higher than the value of this parameter.
Instance
Cell
0..63
Unit
N/A
Default Value
30
Default Value
By default, the handover due to good level and bad quality is determined
when the downlink level of this cell is higher than -80 dB.
2-1114
SJ-20130408140048-016|2013-07-17(R1.0)

When it is difficult to initiate a handover due to good level and bad quality,
decrease the threshold. After enabling this function, pay attention to the
call drop rate. If the call drop rate deteriorates, increase the threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.197 HoAccess Require CI

Full Name
HoAccess Require CI
Abbreviation
HoAccessReqCI
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
CI ratio required for handover detection
Instance
Cell
0..255
Unit
N/A
Default Value
12
Default Value
According to the lab data, demodulated signals of NB are bad when the
receive signals CI is smaller than 12.
Enable the handover bounce scenario as required. Set a proper CI
threshold according to that of the actual frequency point used for testing.
Change Mode
Offline
2-1115
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.198 Good level and bad quality handover enable

Full Name
Good level and bad quality handover enable
Abbreviation
GoodLevBadRQHoEnable
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether this cell supports good level and bad
quality handover. If the bad quality handover is determined successfully
but there is not a candidate cell, the system determines whether to enable
Description
the high level and bad quality handover.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
By default, the handover due to good level and bad quality is disabled.
According to the DT data, this function can be enabled if call drop

frequently occurs in TCH channels due to good level and bad quality. After
enabling this function, pay attention to the call drop rate. If the call drop rate
deteriorates, disable this function or modify the "GoodLevBadRQoffSet" or
"GoodLevBadRQHoDLLev" parameter.
2-1116
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.24.199 Penalty time for inter-subcell handover failure

Full Name
Penalty time for inter-subcell handover failure
Abbreviation
SChoFailPenalTime
Managed Object
Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the penalty time in case of inter-subcell handover
failure. It can be set separately from the penalty time for inter-cell handover
Description
failure.
Instance
Cell
1..255
Unit
N/A
Default Value
14
Default Value
Consistent with the default value of the parameter hoFailPenalTime

If it is necessary to slow down or speed up cell handover determination,
this parameter can be adjusted to lengthen or shorten the penalty time
for inter-cell handover separately. But too short penalty time is not
recommended.
Change Mode
Offline
2-1117
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGB-02-02-001 Handover Between Macro- and Micro-cells
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25 SDCCH Handover Control (GSdHandoverControl)

2.25.1 SDCCH Handover Control ID
Full Name
SDCCH Handover Control ID
Abbreviation
GSdHandoverControl
Managed Object
SDCCH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
SDCCH Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1118
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->SDCCH Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.2 Allow Distance SDCCH handover(High Speed)

Full Name
Allow Distance SDCCH handover(High Speed)
Abbreviation
sdhoControlDis_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Distance SDCCH handover(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Algorithm for special applications

This parameter is used when extended cell exists in wide coverage
situation. Handover can be applied between an ordinary cell and an
extended cell.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1119
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.3 Allow PBGT SDCCH handover(High Speed)

Full Name
Allow PBGT SDCCH handover(High Speed)
Abbreviation
sdhoControlPbgt_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow PBGT SDCCH handover(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
SDCCH handover is used only in an emergency.

Generally speaking, handover triggered by PBGT is enabled. Under
some special circumstances the function is disabled.
The PBGTHOLAYER parameter and hierarchical parameters can be

used together for PBGT handover.

PBGT level parameter and hierarchical parameters can be used together
to delay the PBGT handover. The PBGT handover is conducted in a
same level as much as possible.
PBGT handover helps to improve the success ratio of handover, call
drop ratio and coverage ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
2-1120
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.4 Allow rapid SDCCH handover(High Speed)

Full Name
Allow rapid SDCCH handover(High Speed)
Abbreviation
sdhoControlRapid_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow rapid SDCCH handover(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

The uplink rapid fading handover is applied on MS with fast moving
speed, definite direction and fast fading caused by blocks. If this function
is enabled, some neighbor cells need to be configured for fast fading
handover.
Then the call drop ratio and coverage ratio can be improved under
special circumstances.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-1121
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.5 Allow quality SDCCH handover in uplink(High Speed)

Full Name
Allow quality SDCCH handover in uplink(High Speed)
Abbreviation
sdhoControlQuaUl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality SDCCH handover in uplink(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Universal Handover Algorithm

It is recommended to enable the handover triggered by uplink
transmission quality to avoid voice problem or call drops.
This function will result in frequent handover, but will help to lower the
call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1122
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.6 Allow level SDCCH handover in uplink(High Speed)

Full Name
Allow level SDCCH handover in uplink(High Speed)
Abbreviation
sdhoControlLevUl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level SDCCH handover in uplink(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

It is recommended to disable the rescue handover triggered by uplink
level. For the fast-moving and wide coverage situation, it is better to
enable this function, and the corresponding threshold value needs to
be modified.
call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1123
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.7 Allow quality SDCCH handover in downlink(High Speed)

Full Name
Allow quality SDCCH handover in downlink(High Speed)
Abbreviation
sdhoControlQuaDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality SDCCH handover in downlink(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

It is recommended to enable the handover triggered by downlink
call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1124
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.8 Allow level SDCCH handover in downlink(High Speed)

Full Name
Allow level SDCCH handover in downlink(High Speed)
Abbreviation
sdhoControlLevDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level SDCCH handover in downlink(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
2-1125
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.25.9 Downlink rapid SDCCH handover enable(High Speed)

Full Name
Downlink rapid SDCCH handover enable(High Speed)
Abbreviation
sdhoControlRapidDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink rapid SDCCH handover enable(High Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

The rapid level handover for adjacent cells

is usually applied in special scenarios, for example, high-speed railway
scenario.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-1126
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.10 Downlink rapid quality drop THS(High Speed)

Full Name
Downlink rapid quality drop THS(High Speed)
Abbreviation
sdhoControlRQuaDl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
is allowed. It is used for handover on SDCCH.
of rescue handovers in high-speed scenarios. This algorithm uses
the raw measurement data of downlink quality, applies no window
decisions.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

This parameter is enabled when the serving

cell has poor downlink transmission quality and supports handover
on SDCCH.
on SDCCH.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
This parameter takes effect when the system

support SDCCH handover.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1127
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.11 Allow Distance SDCCH handover(Middle Speed)

Full Name
Allow Distance SDCCH handover(Middle Speed)
Abbreviation
sdhoControlDis_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow Distance SDCCH handover(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

extended cell.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
2-1128
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.25.12 Allow PBGT SDCCH handover(Middle Speed)

Full Name
Allow PBGT SDCCH handover(Middle Speed)
Abbreviation
sdhoControlPbgt_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow PBGT SDCCH handover(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1129
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.13 Allow rapid SDCCH handover(Middle Speed)

Full Name
Allow rapid SDCCH handover(Middle Speed)
Abbreviation
sdhoControlRapid_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow rapid SDCCH handover(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

handover.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1130
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.14 Allow quality SDCCH handover in uplink(Middle Speed)

Full Name
Allow quality SDCCH handover in uplink(Middle Speed)
Abbreviation
sdhoControlQuaUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality SDCCH handover in uplink(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
2-1131
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.25.15 Allow level SDCCH handover in uplink(Middle Speed)

Full Name
Allow level SDCCH handover in uplink(Middle Speed)
Abbreviation
sdhoControlLevUl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level SDCCH handover in uplink(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

be modified.
call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
2-1132
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.25.16 Allow quality SDCCH handover in downlink(Middle Speed)

Full Name
Allow quality SDCCH handover in downlink(Middle Speed)
Abbreviation
sdhoControlQuaDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow quality SDCCH handover in downlink(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2-1133
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.17 Allow level SDCCH handover in downlink(Middle Speed)

Full Name
Allow level SDCCH handover in downlink(Middle Speed)
Abbreviation
sdhoControlLevDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Allow level SDCCH handover in downlink(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.18 Downlink rapid SDCCH handover enable(Middle Speed)

Full Name
Downlink rapid SDCCH handover enable(Middle Speed)
2-1134
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
sdhoControlRapidDl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink rapid SDCCH handover enable(Middle Speed)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

The rapid level handover for adjacent cells

is usually applied in special scenarios, for example, high-speed railway
scenario.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.19 Downlink rapid quality drop THS(Middle Speed)

Full Name
Downlink rapid quality drop THS(Middle Speed)
Abbreviation
sdhoControlRQuaDl_M
Managed Object
3GPP Name
N/A
2-1135
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
of rescue handovers in intermediate-speed scenarios. This algorithm
uses the raw measurement data of downlink quality, applies no window
decisions.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value


on SDCCH.
on SDCCH.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1136
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.20 Allow SDCCH handover

Full Name
Allow SDCCH handover
Abbreviation
sdhoControl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines if SDCCH handover is allowed.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
There is few handover applications on SDCCH.
This function can be enabled if needed.

This function is usually applied in the area
with high MS moving speed or with small coverage. The SDCCH
handover
can be enabled to avoid call setup failure.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.21 Allow Distance SDCCH handover(Low Speed)

Full Name
Allow Distance SDCCH handover(Low Speed)
2-1137
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
sdhoControlDis_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
This parameter determines whether to allow standard PBGT handover.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

extended cell.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.22 Allow PBGT SDCCH handover(Low Speed)

Full Name
Allow PBGT SDCCH handover(Low Speed)
Abbreviation
sdhoControlPbgt_L
Managed Object
3GPP Name
None
2-1138
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Description
This parameter determines whether to allow handover due to distance.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.23 Allow dynamic adjustment of SDCCH handover priority

Full Name
Allow dynamic adjustment of SDCCH handover priority
Abbreviation
sdhoControlDynPrio
Managed Object

2-1139
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to allow dynamic adjustment of
handover priority.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
This function can optimize the traffic distribution.
The function is recommended to be enabled in the area with busy traffic.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.24 Allow rapid SDCCH handover(Low Speed)

Full Name
Allow rapid SDCCH handover(Low Speed)
Abbreviation
sdhoControlRapid_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-1140
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to allow rapid handover.

Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

handover.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.25 Allow quality SDCCH handover in uplink(Low Speed)

Full Name
Allow quality SDCCH handover in uplink(Low Speed)
Abbreviation
sdhoControlQuaUl_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-1141
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter describes whether quality handover in uplink is allowed.

Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.26 Allow level SDCCH handover in uplink(Low Speed)

Full Name
Allow level SDCCH handover in uplink(Low Speed)
Abbreviation
sdhoControlLevUl_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter describes whether level handover in uplink is allowed.
Description

2-1142
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

be modified.
call drop ratio.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.27 Allow quality SDCCH handover in downlink(Low Speed)

Full Name
Allow quality SDCCH handover in downlink(Low Speed)
Abbreviation
sdhoControlQuaDl_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-1143
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter describes whether quality handover in downlink is

allowed.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.28 Allow level SDCCH handover in downlink(Low Speed)

Full Name
Allow level SDCCH handover in downlink(Low Speed)
Abbreviation
sdhoControlLevDl_L
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-1144
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter describes whether level handover in downlink is allowed.

Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

call drop ratio.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.29 Downlink rapid SDCCH handover enable(Low Speed)

Full Name
Downlink rapid SDCCH handover enable(Low Speed)
Abbreviation
sdhoControlRapidDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1145
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether to enable SDCCH downlink rapid

handover.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

SDCCH handover//The handover to a neighbor

cell triggered by high moving speed is usually conducted on a high-speed
railway.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.30 Downlink rapid quality drop THS(Low Speed)

Full Name
Downlink rapid quality drop THS(Low Speed)
Abbreviation
sdhoControlRQuaDl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1146
SJ-20130408140048-016|2013-07-17(R1.0)

of rescue handovers in low-speed scenarios. This algorithm uses the raw
measurement data of downlink quality, applies no window for neighbor
cells, and shares the N value used for other handover decisions.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value


on SDCCH.
on SDCCH.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1147
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.31 Perform PBGT SDCCH handover by Directed retry(Low

Speed)
Full Name
Perform PBGT SDCCH handover by Directed retry(Low Speed)
Abbreviation
sdhoControlPbgtDr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
of rescue handovers in low-speed scenarios. This algorithm uses the raw
measurement data of downlink quality, applies no window for neighbor
cells, and shares the N value used for other handover decisions.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
experience value
"Yes" means when SDCCH handover is conducted,
MS is redirected to the TCH channel of a better cell to reduce the
call drop ratio.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1148
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevWindow
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
EXP
Average window value:
Big window value requires more measurement reports for the first
average calculation. The impact of signal fluctuation can be avoided, but

the handover will be delayed. Therefore the handover success ratio, call
drop ratio and the coverage ratio will be affected.
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
2-1149
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
values) used to calculate the average value of downlink signal intensity.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
This parameter should be set on demand of radio
environment.
2-1150
SJ-20130408140048-016|2013-07-17(R1.0)
The parameter value can be set high to get

rid of the impact caused by the incorrect measured value. But if the
value is too high, the decision will not be made in time. Possibly
there will not be enough time for measurement because data

transmission
on SDCCH will not last long.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualWindow
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
used to calculate average value of uplink signal quality.
Instance
Cell
1..20
2-1151
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
EXP

Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualWindow
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1152
SJ-20130408140048-016|2013-07-17(R1.0)

measurement data.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
environment.
The parameter value can be set high to get
rid of the impact caused by the incorrect measured value. But if the
value is too high, the decision will not be made in time. Possibly
there will not be enough time for measurement because data

transmission
on SDCCH will not last long.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1153
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.36 Distance
Full Name
Distance
Abbreviation
distanceWindow
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
measurement data.
Description
MS and BTS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
MS data transmission time on SDCCH is short,

so the window value should be small compared with TCH, otherwise the
handover decision will not be made in time.


delays.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1154
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Neighboring cell
Abbreviation
ncellWindow
Managed Object
3GPP Name
None
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
EXP

Change Mode
Offline
Related features
N/A
2-1155
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
zeroAllowed
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
2-1156
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..20
Unit
N/A
Default Value
Default Value
Usually with general window value and N value,
one null value can be accepted.

The counterpart has more endurance of unsteadiness
during measurement if the parameter gets a bigger value. The parameter
value can be adjusted bigger when there are more neighbor cells or
more interference with the radio environment.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1157
SJ-20130408140048-016|2013-07-17(R1.0)
According to GSM specifications, handover decisions depend upon a

series of average values received. The uplink receiving strength is one
of the handover causes. The decision process is as follows: If P out of
the latest N average values of uplink signal strength is lower than the
uplink receiving level threshold, perform handover to improve the uplink
signal strength.
This parameter (HoUlLevThs) defines the related threhold value.
Usually, the value of "HoUlLevThs" should be less than the threshold for
uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover. This parameter can
be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoUlLevN parameter defines the related N value. The HoUlLevP
parameter defines the related P value.
Description
This parameter is supported from version V6.20.614b.
Instance
Cell
0:< -110dBm
1:-110~-109 dBm
2:-109~-108dBm
3:-108~-107dBm
4:-107~-106dBm
5:-106~-105dBm
6:-105~-104dBm
7:-104~-103dBm
8:-103~-102dBm
9:-102~-101dBm
10:-101~-100dBm
11:-100~-99dBm
12:-99~-98dBm
13:-98~-97dBm
14:-97~-96dBm
15:-96~-95dBm
16:-95~-94dBm
17:-94~-93dBm
18:-93~-92dBm
19:-92~-91dBm
20:-91~-90dBm
21:-90~-89dBm
22:-89~-88dBm
23:-88~-87dBm
24:-87~-86dBm
25:-86~-85dBm
26:-85~-84dBm
27:-84~-83dBm
28:-83~-82dBm
2-1158
SJ-20130408140048-016|2013-07-17(R1.0)
29:-82~-81dBm
30:-81~-80dBm
31:-80~-79dBm
32:-79~-78dBm
33:-78~-77dBm
34:-77~-76dBm
35:-76~-75dBm
36:-75~-74dBm
37:-74~-73dBm
38:-73~-72dBm
39:-72~-71dBm
40:-71~-70dBm
41:-70~-69dBm
42:-69~-68dBm
43:-68~-67dBm
44:-67~-66dBm
45:-66~-65dBm
46:-65~-64dBm
47:-64~-63dBm
48:-63~-62dBm
49:-62~-61dBm
50:-61~-60dBm
51:-60~-59dBm
52:-59~-58dBm
53:-58~-57dBm
54:-57~-56dBm
55:-56~-55dBm
56:-55~-54dBm
57:-54~-53dBm
58:-53~-52dBm
59:-52~-51dBm
60:-51~-50dBm
61:-50~-49dBm
62:-49~-48dBm
63:> -48dBm
Unit
N/A
Default Value
Default Value
2-1159
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlLevThs < PcDlInclLevThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
series of average values received. The downlink receiving strength is
one of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal strength is lower than
the downlink receiving level threshold, perform handover to improve the
downlink signal strength.
This parameter (HoDlLevThs) defines the related threhold value.
Usually, the value of "HoDlLevThs" should be lower than the threshold
for downlink power control (increase). That is, perform power control
first. If power control does not function, perform handover. This
parameter can be set to 15 by default (that is, -96 dBm ~ -95 dBm).
The HoDlLevN parameter defines the related N value. The HoDlLevP
Description
Instance
Cell
2-1160
SJ-20130408140048-016|2013-07-17(R1.0)
0:< -110dBm
1:-110 .. -109 dBm
2:-109 .. -108dBm
3:-108 .. -107dBm
4:-107 .. -106dBm
5:-106 .. -105dBm
6:-105 .. -104dBm
7:-104 .. -103dBm
8:-103 .. -102dBm
9:-102 .. -101dBm
10:-101 .. -100dBm
11:-100 .. -99dBm
12:-99 .. -98dBm
13:-98 .. -97dBm
14:-97 .. -96dBm
15:-96 .. -95dBm
16:-95 .. -94dBm
17:-94 .. -93dBm
18:-93 .. -92dBm
19:-92 .. -91dBm
20:-91 .. -90dBm
21:-90 .. -89dBm
22:-89 .. -88dBm
23:-88 .. -87dBm
24:-87 .. -86dBm
25:-86 .. -85dBm
26:-85 .. -84dBm
27:-84 .. -83dBm
28:-83 .. -82dBm
29:-82 .. -81dBm
30:-81 .. -80dBm
31:-80 .. -79dBm
32:-79 .. -78dBm
33:-78 .. -77dBm
34:-77 .. -76dBm
35:-76 .. -75dBm
36:-75 .. -74dBm
37:-74 .. -73dBm
38:-73 .. -72dBm
39:-72 .. -71dBm
40:-71 .. -70dBm
41:-70 .. -69dBm
42:-69 .. -68dBm
43:-68 .. -67dBm
2-1161
SJ-20130408140048-016|2013-07-17(R1.0)
44:-67 .. -66dBm
45:-66 .. -65dBm
46:-65 .. -64dBm
47:-64 .. -63dBm
48:-63 .. -62dBm
49:-62 .. -61dBm
50:-61 .. -60dBm
51:-60 .. -59dBm
52:-59 .. -58dBm
53:-58 .. -57dBm
54:-57 .. -56dBm
55:-56 .. -55dBm
56:-55 .. -54dBm
57:-54 .. -53dBm
58:-53 .. -52dBm
59:-52 .. -51dBm
60:-51 .. -50dBm
61:-50 .. -49dBm
62:-49 .. -48dBm
63:> -48dBm
Unit
N/A
Default Value
18
Default Value
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlLevThs < PcDlInclLevThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1162
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
series of average values received. The uplink receiving quality is one
the latest N average values of uplink signal quality is lower than the
uplink receiving quality threshold, perform handover to improve the
uplink signal quality.
This parameter (HoUlQualThs) defines the related threhold value.
Usually, the value of "HoUlQualThs" should be lower than the threshold
for uplink power control (increase). That is, perform power control first. If
power control does not function, perform handover.
The HoUlQualN parameter defines the related N value. The HoUlQualP
Description
Instance
Cell
9: R<0.2%
19: BER<0.4%
29: 0.4%<BER<0.8%
39: 0.8%<BER<1.6%
49: 1.6%<BER<3.2%
59: 3.2%<BER<6.4%
69: 6.4%<BER<12.8%
70: 12.8%<BER
Unit
N/A
Default Value
39
Default Value
2-1163
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlQualThs > PcDlInclQualThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
HoDlQualThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
series of average values received. The downlink receiving quality is one
of the handover causes. The decision process is as follows: If P out
of the latest N average values of downlink signal quality is lower than
the downlink receiving quality threshold, perform handover to improve
the downlink signal quality.
This parameter (HoDlQualThs) defines the related threhold value.
Usually, the value of "HoDlQualThs" should be lower than the threshold
first. If power control does not function, perform handover.
The HoDlQualN parameter defines the related N value. The HoDlQualP
Description
2-1164
SJ-20130408140048-016|2013-07-17(R1.0)

Instance
Cell
9: R<0.2%
19: BER<0.4%
29: 0.4%<BER<0.8%
39: 0.8%<BER<1.6%
49: 1.6%<BER<3.2%
59: 3.2%<BER<6.4%
69: 6.4%<BER<12.8%
70: 12.8%<BER
Unit
N/A
Default Value
39
Default Value

Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlQualThs > PcDlInclQualThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevP
2-1165
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
signal strength.
Usually, the value of "HoUlLevThs" should be lower than the threshold
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


increase.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1166
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
signal strength.
Usually, the value of "HoUlLevThs" should be lower than the threshold
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
environment.
Change Mode
Offline
Related features
2-1167
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
ShoEnable
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
2
2-1168
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value


increase.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1169
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
environment.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1170
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
hoUlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


increase.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1171
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
2-1172
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
ShoEnable
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
2-1173
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value


increase.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1174
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1175
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
rapidHoThs
Managed Object
3GPP Name
None
3GPP Reference
N/A
During uplink rapid fading handover, some parameters should be
used. During SDCCH handover, the rapid handover threshold value
is the uplink signal intensity threshold value. If the measured uplink
signal intensity of a call is continuously lower than the rapid handover
threshold, then it triggers handover from the existing cell to the most
probable candidate cell.
RapidHoN is a counter value. That is, the minimum number of times
that the measured signal intensity is continuously lower than the rapid
handover threshold. The value of RapidHoN should ensure that the
rapid handover is faster than the ordinary signal level handover.
The value of RapidHoThs can be set to 15 (that is, -96 dBm~-95 dBm)
Description
that is consistent with the level threshold value of ordinary handover.
Instance
Cell
0..63
Unit
N/A
Default Value
10
Default Value
EXP
This parameter takes effect after the parameter HoControl13 is set to
allow the quick level lowering handover. RapidHoThs should be set not

larger than downlink level handover threshold, and the decision N value
is smaller the N value for level decision.
It is recommended to use the default values.
Under the situations of fast moving and weak coverage, call drop ratio
can be lowerd.
Change Mode
Offline
Related features
ZGO-02-02-001 Handover between Macro- and Micro-cells
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1176
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rapidHoN
Managed Object
3GPP Name
None
3GPP Reference
N/A
During uplink rapid fading handover, some parameters should be
used. During SDCCH handover, the rapid handover threshold value
is the uplink signal intensity threshold value. If the measured uplink
signal intensity of a call is continuously lower than the rapid handover
threshold, then it triggers handover from the existing cell to the most
probable candidate cell.
RapidHoN is a counter value. That is, the minimum number of times
that the measured signal intensity is continuously lower than the rapid
handover threshold. The value of RapidHoN should ensure that the
rapid handover is faster than the ordinary signal level handover.
The value of RapidHoThs can be set to 15 (that is, -96 dBm~-95 dBm)
Description
that is consistent with the level threshold value of ordinary handover.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
EXP
2-1177
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter takes effect after the parameter HoControl13 is set to

allow the quick level lowering handover. RapidHoThs should be set not
larger than downlink level handover threshold, and the decision N value
is smaller the N value for level decision.
It is recommended to use the default values.
Under the situations of fast moving and weak coverage, call drop ratio
can be lowerd.
Change Mode
Offline
Related features
ZGO-02-02-001 Handover between Macro- and Micro-cells
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
distanceThs
Managed Object
3GPP Name
None
3GPP Reference
N/A
According to GSM specifications, handover decisions depend upon received average value of uplink and downlink signal strength. The decision
process is as follows: For the latest N average values of TA (distance),
if P of the N values rises above relevant threshold value, then perform
Description
handover. The handover is due to MS being out of the cell service range.
Instance
Cell
2-1178
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
{parent.cellType==4}219
Default Value
EXP
TA handover is seldom applied. Set this parameter
as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
distanceP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
2-1179
SJ-20130408140048-016|2013-07-17(R1.0)
According to GSM specifications, arbitration for SDCCH can be

conducted after a series of average values of uplink and downlink signal
strength are obtained. The distance between MS and BTS can impact
the handover. The arbitration process is as follows: For the latest N
average values of TA (distance), if P of the N values are higher than the
relevant threshold value, perform a handover. The handover happens
due to MS being out of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description
DistanceP defines the relevant P value.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value


handover decision.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
This parameter takes effect when handovers on SDCCH are supported.

The parameter value should not be higher than DistanceN.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name

2-1180
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
distanceN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
According to GSM specifications, arbitration for SDCCH can be
conducted after a series of average values of uplink and downlink signal
strength are obtained. The distance between MS and BTS can impact
the handover. The arbitration process is as follows: For the latest N
average values of TA (distance), if P of the N values are higher than the
relevant threshold value, perform a handover. The handover happens
due to MS being out of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description
DistanceP defines the relevant P value.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



delays.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
This parameter takes effect when handovers on SDCCH are supported.

The parameter value should not be lower than DistanceP.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1181
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.25.56 Downlink rapid handover offset of high speed

Full Name
Downlink rapid handover offset of high speed
Abbreviation
dlRapidHoOffsetH
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
for SDCCH downlink rapid handover.
for downlink rapid handover if the train speed is higher than 250km/hr.
Description
Instance
Cell
0..63
Unit
dB
Default Value
Default Value
experience value
For the threshold under high speed scenario,
rapid handover should be performed, thereby it is better to set the
offset value to a relatively small value to assist in making handover

decisions.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1182
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.57 Downlink rapid handover offset of middle speed

Full Name
Downlink rapid handover offset of middle speed
Abbreviation
dlRapidHoOffsetM
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
After measurement reports are obtained, the arbitration can be made
for downlink handover caused by fast moving.
The fast moving is one of the triggering cause for downlink handover.
The arbitration process is the following: if the recent N consecutive
downlink levels (not the average values) are higher than the sum of
threshold and offset values, handover should be conducted. The reason
for handover is fast moving. The parameter DLRapidHoOffset_1 defines
the offset threshold for the handover on SDCCH caused by fast moving
speed of 150km//h to 250km/.
Description
V6.20.614b and later versions will support this parameter.
Instance
Cell
0..63
Unit
dB
Default Value
Default Value

with the radio environment that mostly the speed is 150~250km/h under
the high-speed scenario.
speed is 150~250km/h.
Change Mode
Offline
Related features
Related Parameters
ShoEnable
2-1183
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.58 Downlink rapid handover offset of low speed

Full Name
Downlink rapid handover offset of low speed
Abbreviation
dlRapidHoOffsetL
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
After measurement reports are obtained, it can be decided whether to
conduct SDCCH downlink quick handover.
If the recent N consecutive downlink levels (not the average values) are
higher than the sum of threshold and offset values, handover should be
conducted. The reason for handover is rapid moving. The parameter
DLRapidHoOffset_2 defines the offset threshold value for the downlink
Description
quick handover when the train speed is lower than 150km/h.
Instance
Cell
0..63
Unit
dB
Default Value
Default Value

with the radio environment that mostly the speed is lower than 150
km/h under the high-speed scenario.
speed is lower than 150 km/h.

2-1184
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
This parameter takes effect when the system support SDCCH downlink
quick handover.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pbgtHoP
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
Description
arbitration conditions for handover, the PBGT handover will be conducted.
Instance
Cell
1..20
Unit
N/A
Default Value
During an SDCCH handover, if there are P of N PBGT values meets the
Default Value
experience value

Change Mode
Offline
2-1185
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pbgtHoN
Managed Object
3GPP Name
N1..N8,P1..P8
3GPP Reference
N/A
During an SDCCH handover, if there are P of N PBGT values meets the
Description
arbitration conditions for handover, the PBGT handover will be conducted.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
experience value

Change Mode
Offline
2-1186
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.61 Downlink rapid quality drop THS

Full Name
Downlink rapid quality drop THS
Abbreviation
dlQualRapidHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold and value N of downlink rapid
quality drop.
Description
Instance
Cell
8..70
Unit
N/A
Default Value
60
Default Value
If the quality value is higher than 60, quick
handover needs to be conducted.

The possibility to start the handover becomes

smaller if the quality value becomes higher. If the parameter value

is set too high, call drop will happen easily. If the value is too
low, there will be more handovers. This function increase the risk
of handover failure ratio.
2-1187
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.62 Downlink rapid quality drop Value N

Full Name
Downlink rapid quality drop Value N
Abbreviation
dlQualRapidHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold and value N of downlink rapid
quality drop.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
2-1188
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.63 Neighbour cell for emergency handover

Full Name
Neighbour cell for emergency handover
Abbreviation
ncellWindowEmerg
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the size of the window used for calculating the
average value of signal strength of the neighbour cell with emergent
handover. The size is the number of samples used in averaging.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
normal setting
2-1189
SJ-20130408140048-016|2013-07-17(R1.0)
Changing the parameter value can impact the

sensitivity of the target cell selection by handover decision. The
neighbor cell is not likely to be chosen as the target cell if the

parameter value is big.
Change Mode
Offline
Related features
N/A
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710d
Parameter Modifying
Detail
Update
2.25.64 Allow signal quality handover on SDCCH(High speed)

Full Name
Allow signal quality handover on SDCCH(High speed)
Abbreviation
sdBepHoControl_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value


2-1190
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
sdMeanBEPHoThs,sdMeanBEPHoP,sdMeanBEPHoN,sdCVBEPHoThs,sdCVBEPHoP,sdCVBEPHoN
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.65 Allow signal quality handover on SDCCH(Middle speed)

Full Name
Allow signal quality handover on SDCCH(Middle speed)
Abbreviation
sdBepHoControl_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
2-1191
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.66 Allow signal quality handover on SDCCH(Low speed)

Full Name
Allow signal quality handover on SDCCH(Low speed)
Abbreviation
sdBepHoControl_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
Relationship
None
2-1192
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.67 Handover Threshold of Mean Bit Error Probability on

SDCCH
Full Name
Handover Threshold of Mean Bit Error Probability on SDCCH
Abbreviation
sdMeanBEPHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Threshold of Mean Bit Error Probability on SDCCH
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1193
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.68 Handover Value P of Mean Bit Error Probability on SDCCH

Full Name
Handover Value P of Mean Bit Error Probability on SDCCH
Abbreviation
sdMeanBEPHoP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Value P of Mean Bit Error Probability on SDCCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl,sdMeanBEPHoN
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1194
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.69 Handover Value N of Mean Bit Error Probability on SDCCH

Full Name
Handover Value N of Mean Bit Error Probability on SDCCH
Abbreviation
sdMeanBEPHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Value N of Mean Bit Error Probability on SDCCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl,sdMeanBEPHoP
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1195
SJ-20130408140048-016|2013-07-17(R1.0)
2.25.70 Handover Threshold of CV Bit Error Probability on SDCCH

Full Name
Handover Threshold of CV Bit Error Probability on SDCCH
Abbreviation
sdCVBEPHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover Threshole of CV Bit Error Probability on SDCCH
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.71 Handover P Number of CV Bit Error Probability on SDCCH

Full Name
Handover P Number of CV Bit Error Probability on SDCCH
Abbreviation
sdCVBEPHoP
Managed Object

2-1196
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover P Number of CV Bit Error Probability on SDCCH
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl,sdCVBEPHoN
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.72 Handover N Number of CV Bit Error Probability on SDCCH

Full Name
Handover N Number of CV Bit Error Probability on SDCCH
Abbreviation
sdCVBEPHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Handover N Number of CV Bit Error Probability on SDCCH
Instance
Cell
2-1197
SJ-20130408140048-016|2013-07-17(R1.0)
1..20
Unit
N/A
Default Value
Default Value
empirical value

Change Mode
Offline
Related features
N/A
Related Parameters
sdBepHoControl,sdCVBEPHoP
Relationship
P<N
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.73 Back to Source Cell when PBGT Handover

Full Name
Back to Source Cell when PBGT Handover
Abbreviation
PBGTHoBacktoSource
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Turns on/off the electricity level requirement switch for PBGT handovers.
If the electricity level does not meet the requirement, the PHY Info is not
delivered, therefore the handover fails and the MS is back to the source
Description
channel.
Instance
Cell
0: No
1: Yes
2-1198
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
By default, this function is disabled.
To enable the back-to-source cell function for PBGT handovers, set this
parameter to "Yes".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.74
Handover
Full Name
Handover
Abbreviation
OtherHoBacktoSource
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Turns on/off the electricity level requirement switch for non-PBGT handovers. If the electricity level does not meet the requirement, the PHY
Info is not delivered, therefore the handover fails and the MS is back to
Description
the source channel.
2-1199
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, this function is disabled.
To enable the back-to-source cell function for non-PBGT handovers,
set this parameter to "Yes".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.75 HoAccess Require Rxlevel offset

Full Name
HoAccess Require Rxlevel offset
Abbreviation
HoAccessReqLevOffset
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Used to calculate the offset value for the required handover access level.
The calculation formula is: 110 - TargetAverageRxLevel + LinkBalance +
Description
(HoAccessReqLevOffset - 35).
Instance
Cell
0..70
2-1200
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
45
Default Value
The default offset value is 10 db.
To lower the requirement for the handover access level, increase the
parameter value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.76 HoAccess Require Rxlevel Select Strategy when Other

Handover
Full Name
HoAccess Require Rxlevel Select Strategy when Other Handover
Abbreviation
OtherHoAccessLevSel
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Sets the selection policy for the required handover access threshold level
that triggers a non-PBGT handover. The following electricity levels are
valid: minimum handover access level, or the level calculated by the
formula: 110 - TargetAverageRxLevel + LinkBalance + (HoAccessRe-
Description
qLevOffset - 35).
Instance
Cell
2-1201
SJ-20130408140048-016|2013-07-17(R1.0)
1:Expected uplink level

2:Minimum allowed access level
Unit
N/A
Default Value
Default Value
By default, policy 1 is applied.
If the SD indexes are degraded with policy 1, set this parameter to
2 (policy 2).
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.77 Back to Source Cell when MSC Controlled Incoming

Handover
Full Name
Back to Source Cell when MSC Controlled Incoming Handover
Abbreviation
MSCHoInHoBack2Source
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Enables/Disables the back-to-source-cell function when SDCCH incom-
Description
ing handover is performed.
Instance
Cell
0: No
1: Yes
2-1202
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
This function is enabled to when the call drop rate is high at he field. By
default this parameter is set to 0.

This function is enabled when the call drop rate at the field is high.

During the process of handover in from the external, the source cell
is not informed when an MS is handed-over back to its source cell,
therefore, the handover indexes of the source cell may be affected.
Generally back-to-source-cell function is recommended to be disabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.25.78 HoAccess Require CI

Full Name
HoAccess Require CI
Abbreviation
HoAccessReqCI
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
N/A
Instance
Cell
0..255
Unit
N/A
Default Value
12
2-1203
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
According to the lab data, demodulated signals of NB are bad when the
receive signals CI is smaller than 12.
Enable the handover bounce scenario as required. Set a proper CI
threshold according to that of the actual frequency point used for testing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.79 Good level and bad quality handover enable

Full Name
Good level and bad quality handover enable
Abbreviation
GoodLevBadRQHoEnable
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes whether this cell supports good level and bad
quality handover. If the bad quality handover is determined successfully
but there is not a candidate cell, the system determines whether to enable
Description
the high level and bad quality handover.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
By default, the handover due to good level and bad quality is disabled.
2-1204
SJ-20130408140048-016|2013-07-17(R1.0)
According to the DT data, this function can be enabled if call drop

frequently occurs in SDCCH channels due to good level and bad

quality. After enabling this function, pay attention to the call drop rate.
If the call drop rate deteriorates, disable this function or modify the
"GoodLevBadRQoffSet" or "GoodLevBadRQHoDLLev" parameter.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.25.80 Good level and bad quality handover DL Level

Full Name
Good level and bad quality handover DL Level
Abbreviation
GoodLevBadRQHoDLLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The system triggers the high level and bad quality handover when the down-
Description
link level of this cell is higher than the value of this parameter.
Instance
Cell
0..63
Unit
N/A
Default Value
30
Default Value
By default, the handover due to good level and bad quality is determined
when the downlink level of this cell is higher than -80 dB.
2-1205
SJ-20130408140048-016|2013-07-17(R1.0)

decrease the threshold. After enabling this function, pay attention to the
call drop rate. If the call drop rate deteriorates, increase the threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26 VAMOS Configuration (GVamos)

2.26.1 VAMOS Configuration ID
Full Name
VAMOS Configuration ID
Abbreviation
GVamos
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
VAMOS Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None
2-1206
SJ-20130408140048-016|2013-07-17(R1.0)

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->VAMOS Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.2 If support VAMOS

Full Name
If support VAMOS
Abbreviation
SupportVAMOS
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether this cell supports the VAMOS func-
Description
tion.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
The VAMOS function is enabled according to the operator's
requirements.
Change Mode
Offline
2-1207
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-04-05-003 VAMOS Pairing and De-Pairing
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.3 If support MUTE SAIC detection

Full Name
If support MUTE SAIC detection
Abbreviation
muteSaicDetect
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether this cell supports the function of
Description
MUTE SAIC detection.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Enable the function of MUTE SAIC detection
according to operator requirements.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1208
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.4 If support SAIC AFC detection

Full Name
If support SAIC AFC detection
Abbreviation
saicAfcDetect
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether this cell supports the function of SAIC
Description
AFC detection.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Enable the function of SAIC AFC detection according
to operator requirements.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1209
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.5 The priority level of VAMOS pairing

Full Name
The priority level of VAMOS pairing
Abbreviation
priorLevelOfPair
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a priority level threshold for VAMOS pairing.
As required by telecom carriers, the system does not perform VAMOS
pairing for subscribers with high priority levels to guarantee their speech
quality. When the VAMOS feature is enabled, the system only performs
VAMOS pairing for subscribers whose priority levels are less than this
Description
threshold.
Instance
Cell
1..14
Unit
N/A
Default Value
Default Value
By default, pairing is allowed for all the
subscribers.

Unless otherwise specified, pairing is allowed

for all the subscribers. If operators have special requirements, adjust
the priority of the subscribers for pairing as required.
Change Mode
Offline
Related features
ZGO-04-05-006 VAMOS Pairing Based on User Priority
Related Parameters
N/A
Relationship
N/A
2-1210
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.6 The load of start VAMOS FR pairing

Full Name
The load of start VAMOS FR pairing
Abbreviation
frPairLoadThr
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the load threshold for the channel with the
VAMOS FR pairing enabled.
When the cell load exceeds this threshold, the system triggers FR
Description
pairing.
Instance
Cell
20..100
Unit
Default Value
40
When the cell load reaches 40%, it is required
Default Value
to enable the VAMOS FR pairing to avoid congestion and enhance
system
capacity.
The larger this parameter is, the lower is the possibility of initiating FR

matching, the higher is the possibility of cell congestion.

The smaller this parameter is, the higher is the possibility of initiating
FR matching, the more is the system interference caused by VAMOS
matching.
Change Mode
Offline
Related features

2-1211
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
HRPairLoadThr
Relationship
FRPairLoadThr <= HRPairLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.7 The load of start VAMOS HR pairing

Full Name
The load of start VAMOS HR pairing
Abbreviation
hrPairLoadThr
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the load threshold for the channel with the
VAMOS HR pairing enabled.
When the cell load exceeds this threshold, the system triggers FR or
Description
HR pairing.
Instance
Cell
20..100
Unit
Default Value
80
Default Value
When the cell load reaches 80%, that cell is

regarded as busy. It is required to enable the VAMOS HR pairing to
enhance system capacity.
The larger this parameter is, the lower is the possibility of initiating HR

matching, the higher is the possibility of cell congestion.

The smaller this parameter is, the higher is the possibility of initiating
HR matching, the more is the system interference caused by VAMOS
matching.
Change Mode
Offline
2-1212
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
FRPairLoadThr
Relationship
FRPairLoadThr <= HRPairLoadThr
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.8 Support VAMOS II

Full Name
Support VAMOS II
Abbreviation
SupportVAMOSII
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Sets whether VAMOS II MSs can access the network. Currently VAMOS
II MSs is not put into commercial use. The switch is designed to control
Description
the management on VAMOS II MSs.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Currently VAMOS II MSs is not put into commercial use. By default
VAMOS II MSs are not managed by the BSC.

Set this parameter in terms of the test results at the candidate sites.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1213
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.26.9 P value of MS capability predetect

Full Name
P value of MS capability predetect
Abbreviation
MsPreDetP
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Capability detection parameter of VAMOS MSs. This parameter refers to
Description
the P value used for quality and level determination before detection.
Instance
Cell
3..15
Unit
N/A
Default Value
Default Value
By default, it is an optimal test value.
The larger the value, the stricter the detection. It is recommended to use a
larger value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1214
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.10 N value of pair-release uplink quality

Full Name
N value of pair-release uplink quality
Abbreviation
PairRelUlQualN
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
N value of uplink quality for pair release
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
To ensure accurate and fast unpairing, it is recommended to set this
parameter to 8.
If the value is set too small, there are few samples for unpairing
determination, which causes inaccurate determination result. If the value
is set too large, unpairing determination takes a long time, which causes
call drop due to delayed unpairing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1215
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.11 N value of pair-release downlink quality

Full Name
N value of pair-release downlink quality
Abbreviation
PairRelDlQualN
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
N value of downlink quality for pair release
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
parameter to 8.
If the value is set too small, there are few samples for unpairing
determination, which causes inaccurate determination result. If the value
is set too large, unpairing determination takes a long time, which causes
call drop due to delayed unpairing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1216
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.12 N value of MS capability predetect

Full Name
N value of MS capability predetect
Abbreviation
MsPreDetN
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
the N value used for quality and level determination before detection
Instance
Cell
3..20
Unit
N/A
Default Value
Default Value
The larger the value, the stricter the detection. It is recommended to use a
larger value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1217
SJ-20130408140048-016|2013-07-17(R1.0)
2.26.13 Low level threshold of MS capability detect

Full Name
Low level threshold of MS capability detect
Abbreviation
MsDetLowLev
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
the lower threshold that the downlink receive level of MSs must meet before
Description
detection, that is, the level of MSs should be higher than the threshold.
Instance
Cell
70..111
Unit
N/A
Default Value
85
Default Value
The test result of MS capability is accurate in the default range.

Not modified as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.14 High level threshold of MS capability detect

Full Name
High level threshold of MS capability detect
2-1218
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
MsDetHighLev
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
the upper threshold that the downlink receive level of MSs must meet before
Description
detection, that is, the level of MSs should be lower than the threshold.
Instance
Cell
47..85
Unit
N/A
Default Value
75
Default Value
The test result of MS capability is accurate in the default range.

When the "MsDetPwrC" switch is on, this parameter uses the default
value. In the case of downlink power control enabled, this parameter is
used together with the downlink power decrease threshold in normal
power control. When the downlink power control is enabled and the two
values are very close, use the default value. If the two values have a great
difference, set this parameter to 47.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1219
SJ-20130408140048-016|2013-07-17(R1.0)
2.26.15 Downlink receive quality of pair-release threshold

Full Name
Downlink receive quality of pair-release threshold
Abbreviation
PairRelDlQuaThr
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink quality threshold for pair release
Instance
Cell
0..70
Unit
N/A
Default Value
39
Default Value
The voice quality is acceptable if it is higher than the threshold.

If the threshold is set too high, bad voice quality will affect user perception
and causes other consequences such as call drop. If the threshold is set
too low, unpairing is frequent, which affects the system performance.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.16 AFC detect switch of MUTE SAIC

Full Name
AFC detect switch of MUTE SAIC
Abbreviation
AfcDtectOfMuteSaic
2-1220
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Capability detection parameter of VAMOS MSs. This parameter determines
whether to implement AFC detection for the MSs whose detection result is
Description
"muteSAIC".
Instance
Cell
0:Not detect 1:Detect
Unit
N/A
Default Value
Default Value
Further detection is required when an AFC problem exist in the MSs
whose detection result is "muteSAIC".

It is recommended to enable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.17 Uplink receive quality of pair-release threshold

Full Name
Uplink receive quality of pair-release threshold
Abbreviation
PairRelUlQuaThr
Managed Object
VAMOS Configuration
3GPP Name
N/A
2-1221
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Description
Uplink quality threshold for pair release
Instance
Cell
0..70
Unit
N/A
Default Value
39
Default Value
The voice quality is acceptable if it is higher than the threshold.

If the threshold is set too high, bad voice quality will affect user perception
and causes other consequences such as call drop. If the threshold is set
too low, unpairing is frequent, which affects the system performance.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.18 The period of SAIC AFC power control

Full Name
the period of SAIC AFC power control
Abbreviation
PwrCTimeOfSaicAfc
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
SAIC AFC power control. It is the burst value of +SCPIR and -SCPIR.
VAMOS power control parameter. This parameter refers to the interval of
2-1222
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.19 The load of VAMOS pair release

Full Name
The load of VAMOS pair release
Abbreviation
PairReleaseLoadThr
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Load threshold of channels that enable the VAMOS pair release. When the
load of a cell is lower than the threshold, the call can initiate the VAMOS
Description
pair release process.
Instance
Cell
0..80
2-1223
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
Default Value
20
Default Value
A balance should be made among cell load, voice quality and system
performance.

If the threshold is set to high, the cell load does not decrease. If the
threshold is set to low, the voice quality and system performance are not
improved.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.20 The level power control switch of MS capability detect

Full Name
the level power control switch of MS capability detect
Abbreviation
MsDetPwrC
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Capability detection parameter of VAMOS MSs. When downlink power control is not enabled, this parameter determines whether to implement power
control on the MSs to be detected so that the level is between the upper
Description
and lower thresholds.
Instance
Cell
0:No 1:Yes
Unit
N/A
2-1224
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
0
The test result of MS capability is accurate in the default range. In the
places where power control is disabled, the power control needs to be
enabled independently.

Enable this function when the downlink power control is disabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.21 The alpha value of SAIC AFC power control

Full Name
the alpha value of SAIC AFC power control
Abbreviation
PwrCAlphaOfSaicAfc
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
VAMOS power control parameter. This parameter refers to SCPIR value
Description
used for SAIC AFC power control.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value

2-1225
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.22 Support pair release due to quality

Full Name
Support pair release due to quality
Abbreviation
PairReleaseOfQual
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter determines whether pair release due to quality is supported.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
When the voice quality of paired MSs decreases to a certain threshold,
call drop occurs if they are not unpaired.

Not modified
Change Mode
Offline
Related features
N/A
2-1226
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.23 Support handover from VAMOS FR to VAMOS HR

Full Name
Support handover from VAMOS FR to VAMOS HR
Abbreviation
SupportVamosHO
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the system triggers a handover from
VAMOS FR to VAMOS HR due to continuously high load after the VAMOS
Description
FR is paired.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
For VAMOS FR-VAMOS HR handover, it occurs in two MSs
simultaneously, which affects the system performance.

Not modified unless otherwise specified
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1227
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.24 SAIC AFC power control switch

Full Name
SAIC AFC power control switch
Abbreviation
PwrCOfSaicAfc
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
VAMOS power control parameter. This parameter controls the pairing of
AFC MSs, that is, it determines whether to use a particular power control
Description
method for AFC MSs.
Instance
Cell
0:Not use AFC power control 1:Use AFC power control
Unit
N/A
Default Value
Default Value
It is a new AFC power control method, which is disabled temporarily. It is
enabled as required.

Set according to the verification result on site
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1228
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.25 VAMOS Pair Selecting

Full Name
VAMOS Pair Selecting
Abbreviation
PairOfFrAndHr
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether this cell supports FR+FR pairs or
FR+HR pairs. 0: Not support F+F or F+H 1: Support F+F 2: Support F+H
Description
3: Support F+F and F+H
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
By default, all pairing modes are allowed, which improves the channel
utilization.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1229
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.26 P value of pair-release uplink quality

Full Name
P value of pair-release uplink quality
Abbreviation
PairRelUlQualP
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
P value of uplink quality for pair release
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
parameter to 6.

If the value is set too small, the unpairing conditions are easy to be met,
which causes frequent unpairing. If the value is set too large, the unpairing
conditions are difficult to be met, which causes few unpairing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1230
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.26.27 P value of pair-release downlink quality

Full Name
P value of pair-release downlink quality
Abbreviation
PairRelDlQualP
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
P value of downlink quality for pair release
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
parameter to 6.

If the value is set too small, the unpairing conditions are easy to be met,
which causes frequent unpairing. If the value is set too large, the unpairing
conditions are difficult to be met, which causes few unpairing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1231
SJ-20130408140048-016|2013-07-17(R1.0)
2.26.28 The expected received level

Full Name
The expected received level
Abbreviation
ExpectedLev
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the expected minimum receive level on the sub-
Description
scriber downlink after pairing.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
It is generally considered that a normal call can be ensured by a receive
level higher than -100 db on the subscriber downlink after pairing.

The higher the value, the greater the required power, and the more
unlikely to pair subscribers successfully. The lower the value, the higher
the de-pairing rate and call drop rate after pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.29 The level threshold of Vamos paring

Full Name
The level threshold of Vamos paring
2-1232
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
LevThrOfPair
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the receive level threshold for subscriber pairing.
For the two subscribers multiplexing the same TS, the requirements of receive quality and level should be met before pairing to ensure proper oper-
Description
ation of the subscribers and other subscribers in the system after pairing.
Instance
Cell
0..63
Unit
N/A
Default Value
30
Default Value
It is generally considered that a receive level higher than -80 db for
subscriber pairing is helpful to avoid de-pair and call drop.

The higher the value, the more unlikely to pair subscribers successfully.
The lower the value, the higher the de-pairing rate and call drop rate after
pairing.
Change Mode
Offline
Related features
ZGO-04-05-004 VAMOS Pairing Based on Signal Level and Quality
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.30 N value of pair process

Full Name
N value of pair process
Abbreviation
PairProcessN
2-1233
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
During subscriber pairing, this parameter checks the two N values of the
Description
two subscribers fulfilling the pairing conditions.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
The value of 3 is recommended to ensure accurate and quick pairing.

If the value of this parameter is set too low, the number of the pairing
samples will be small, and the pairing result may be inaccurate. If the
value is set to high, it will take a lot of time to pair subscribers, which will
result in a waste of channel resources.
Change Mode
Offline
Related features
Related Parameters
PairProcessP
Relationship
PairProcessN>=PairProcessP
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.31 P value of pair process

Full Name
P value of pair process
Abbreviation
PairProcessP
Managed Object
VAMOS Configuration
3GPP Name
N/A
2-1234
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
During subscriber pairing, this parameter checks the two P values of the
Description
two subscribers fulfilling the pairing conditions.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
The value of 2 is recommended to ensure accurate and quick pairing.

If the value of this parameter is set too low, the pairing conditions are
easily fulfilled, but the number of pairings will be too large. If the value is
set to high, it may be quite difficult to fulfill the pairing conditions.
Change Mode
Offline
Related features
Related Parameters
PairProcessN
Relationship
PairProcessN>=PairProcessP
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.32 The pass loss ratio of candidates

Full Name
The pass loss ratio of candidates
Abbreviation
PassLossRatio
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1235
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the threshold of the path loss ratio for candidate
subscriber pairing. It works well for the subscribers with the similar path
Description
loss.
Instance
Cell
0..100
Unit
Default Value
10
Default Value

It is generally considered that the two subscribers with a path loss ratio
less than 10% are likely to be paired successfully due to their similar
wireless environment.
The lower the value, the more unlikely to pair subscribers successfully.
The higher the value, the higher the de-pairing rate and call drop rate after
pairing due to their quite different wireless environment.
Change Mode
Offline
Related features
ZGO-04-05-005 VAMOS Pairing Based on Path Loss
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.33 The quality threshold of Vamos paring

Full Name
The quality threshold of Vamos paring
Abbreviation
QualThrOfPair
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1236
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the receive quality threshold for subscriber pairing. For the two subscribers multiplexing the same TS, the requirements of
receive quality and level should be met before pairing to ensure proper opDescription
eration of the subscribers and other subscribers in the system after pairing.
Instance
Cell
0..70
Unit
N/A
Default Value
10
Default Value
It is generally considered that a receive quality lower than 1 for subscriber
pairing is helpful to avoid de-pair and call drop.

The lower the value, the more unlikely to pair subscribers successfully.
The higher the value, the higher the de-pairing rate and call drop rate
after pairing.
Change Mode
Offline
Related features
ZGO-04-05-004 VAMOS Pairing Based on Signal Level and Quality
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.34 The downlink SCPIR threshold of MUTE SAIC MS

Full Name
The downlink SCPIR threshold of MUTE SAIC MS
Abbreviation
SCPIR_Dn_MuteSaic
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1237
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter specifies the downlink SCPIR threshold for a MUTE SAIC
Description
MS.
Instance
Cell
11:-4
12:-3
13:-2
14:-1
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
11
Default Value
A downlink SCPIR above -4 works best for pairing.

pairing.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-1238
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.35 The downlink SCPIR threshold of NON-SAIC MS

Full Name
The downlink SCPIR threshold of NON-SAIC MS
Abbreviation
SCPIR_Dn_NoSaic
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the downlink SCPIR threshold for a non-SAIC MS.
Instance
Cell
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
21
Default Value
A downlink SCPIR above 6 works best for pairing.

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1239
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.36 The downlink SCPIR threshold of SAIC MS

Full Name
The downlink SCPIR threshold of SAIC MS
Abbreviation
SCPIR_Dn_Saic
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the downlink SCPIR threshold for a SAIC MS.
Instance
Cell
11:-4
12:-3
13:-2
14:-1
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
2-1240
SJ-20130408140048-016|2013-07-17(R1.0)
30:15
Unit
N/A
Default Value
11
Default Value

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.37 The downlink SCPIR threshold of SAIC AFC MS

Full Name
The downlink SCPIR threshold of SAIC AFC MS
Abbreviation
SCPIR_Dn_SaicAfc
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the downlink SCPIR threshold for an SAIC AFC
Description
MS.
Instance
Cell
2-1241
SJ-20130408140048-016|2013-07-17(R1.0)
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
15
Default Value
A downlink SCPIR above 0 works best for pairing.

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1242
SJ-20130408140048-016|2013-07-17(R1.0)
2.26.38 The downlink SCPIR threshold of VAMOS I MS

Full Name
The downlink SCPIR threshold of VAMOS I MS
Abbreviation
SCPIR_Dn_VAMOSI
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the downlink SCPIR threshold for a VAMOS-I MS.
Instance
Cell
11:-4
12:-3
13:-2
14:-1
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
11
Default Value

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1243
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.39 The downlink SCPIR threshold of VAMOS II MS

Full Name
The downlink SCPIR threshold of VAMOS II MS
Abbreviation
SCPIR_Dn_VAMOSII
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter specifies the downlink SCPIR threshold for a VAMOS-II MS.
Instance
Cell
5:-10
6:-9
7:-8
8:-7
9:-6
10:-5
11:-4
12:-3
13:-2
14:-1
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
2-1244
SJ-20130408140048-016|2013-07-17(R1.0)
24:9
25:10
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
Default Value

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.26.40 The uplink SCPIR threshold

Full Name
The uplink SCPIR threshold
Abbreviation
SCPIR_Up
Managed Object
VAMOS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold of the uplink Sub Channel Power Im-
Description
balance Ratio (SCPIR) of a low power subscriber to high power subscriber.

2-1245
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
15:0
16:1
17:2
18:3
19:4
20:5
21:6
22:7
23:8
24:9
25:10
26:11
27:12
28:13
29:14
30:15
Unit
N/A
Default Value
25
Default Value
An uplink SCPIR above 10 works best for pairing.

pairing.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1246
SJ-20130408140048-016|2013-07-17(R1.0)
2.27 UTRAN Measurement (GUtranMeasure)

2.27.1 UTRAN Measurement ID
Full Name
UTRAN Measurement ID
Abbreviation
GUtranMeasure
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
Description
UTRAN Measurement ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->UTRAN Measurement
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1247
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.2 Require UE to send UTRAN class-mark change message

early
Full Name
Require UE to send UTRAN class-mark change message early
Abbreviation
ecsc_3g
Managed Object
UTRAN Measurement
3GPP Name
3G Early Classmark Sending Restriction44.018
3GPP Reference
3GPP TS 44.018
This parameter indicates whether a UE is required to send UTRAN class-
Description
mark change message early.
Instance
Cell
0: Not allow to send "UTRAN class mark change" message
1: Both ECSC and UE control whether the UE sends "UTRAN classmark
change" message
Unit
N/A
Default Value
Default Value
Users decide whether to enable UTRAN CLASSMARK
early sending.

This parameter should be enabled when the 2/3G

handover is needed and the core network does not open the process
obtained by CLASSMARK.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1248
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.3 Channel location of si2quater broadcast

Full Name
Channel location of si2quater broadcast
Abbreviation
si2quaterPos
Managed Object
UTRAN Measurement
3GPP Name
SI2quater_POSITION
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates channel location of SI2quater broadcast.
Instance
Cell
0: Broadcast on normal BCCH block
1: Broadcast on extended BCCH block , AGCH_BLOCK reservation
value will be 1
Unit
N/A
Default Value
Default Value
Are new features, maintaining the same as before.
The default value is adopted. If the system
is configured with extended BCCH, this parameter is valid.
Change Mode
Offline
Related features
N/A
Related Parameters
BsAgBlkRes
Relationship
the radio blocks will be occupied. The reserved value for BsAgBlkRes
When SI2QuaterPos is set as BCCH extended,

should be at least 1.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1249
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.4 CS measurement type reported by UE

Full Name
CS measurement type reported by UE
Abbreviation
reportTypeCS
Managed Object
UTRAN Measurement
3GPP Name
REPORT_TYPE
3GPP Reference
3GPP TS 45.008
It indicates enhanced measurement report for UE or measurement report
Description
message.
Instance
Cell
0: enhanced measurement report
1: normal measurement report
Unit
N/A
Default Value
Default Value
And consistent with the reported normal mobile phone

It is recommended to use the default value.
The MS that supports 2/3G can give the enhanced measurement report.
More data from adjacent cells can be included in the measurement

report.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1250
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.5 CS number of same frequency adjacent cells in report

Full Name
CS number of same frequency adjacent cells in report
Abbreviation
svrBandRprtCS
Managed Object
UTRAN Measurement
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
3GPP TS 45.008
This parameter defines the number of adjacent cells with the same frequency band as the serving cell, which are included in the measurement
Description
report or the strongest cell list (measurement data in a terminal).
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value

It is recommended to apply the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1251
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.6 Measurement threshold of UE performing UTRAN cell

reselection
Full Name
Measurement threshold of UE performing UTRAN cell reselection
Abbreviation
qsearch_I
Managed Object
UTRAN Measurement
3GPP Name
Qsearch_I
3GPP Reference
3GPP TS 45.008
When the average receiving level (RLA_C) of this cell is lower than
the lower threshold (0 to 6) of this parameter or higher than the upper
threshold (8 to 14) of this parameter, the UE starts the measurement on
a UTRAN reselection cell.
7: always
Description
15: never
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
Do not search the default

Usually in a cell that is expected to interwork with other cells, an MS is
always conducting measurement on other systems. As long as the 3G
system signals meet the residing requirements, handover to this system
can be conducted.
If the system is expected to support GSM -> 3G re-selection, this

parameter should be set 7 in the cell configuration for another radio
system, which will improve the re-selection success rate from 2G to 3G.
The value "15" means the measurement function is disabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1252
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.7 FDD reselection offset

Full Name
FDD reselection offset
Abbreviation
fdd_Qoffset
Managed Object
UTRAN Measurement
3GPP Name
FDD_Qoffset
3GPP Reference
3GPP TS 45.008
This parameter is used to reselect the UTRAN adjacent cell if the
following requirements are satisfied:
Received signal code power (RSCP) of this adjacent cell is higher than
average receiving level RLA_C of this cell.
RSCP of the adjacent cell is higher than RLA_C of all adjacent GSM
cells by at least FDD_Qoffset (FDD reselection offset) for more than
5 seconds. FDD_Qoffset of the cell increases by 5 dB if the cell is
reselected 15 seconds earlier.
Ec/No (code-noise ratio) of this adjacent cell is larger than or equal to
designated FDD_Qmin (minimum value of code-noise ratio of UTRAN
reselected cell).
If more than one UTRAN cell meets above conditions, then select the
Description
cell which has the largest RSCP.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
No adjustment
"8" means that the offset between GSM signals
and 3G signals is "0". However, 3G system frequently occupies 2G
frequencies,
and the transmission power loss is big. It is good to set this parameter
"0", that is, 3G signal quality is not considered in the handover,
thus the 2G -> 3G re-selection success rate is raised.
Change Mode
Offline
2-1253
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.8 Min Ec/No of UTRAN reselecting cell

Full Name
Min Ec/No of UTRAN reselecting cell
Abbreviation
fdd_Qmin
Managed Object
UTRAN Measurement
3GPP Name
FDD_Qmin
3GPP Reference
3GPP TS 45.008
This parameter indicates the minimum value of Ec/No of the UTRAN cell
when it reselects adjacent cell. The value of Ec/No of the UTRAN cell
should be larger than the value defined by this parameter in order to
reselect the adjacent cell.
Description
This parameter is changed in V6.20.613f.
Instance
Cell
0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
7: -12dB
Unit
N/A
Default Value
2-1254
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Median
Key parameter in 2G -> 3G cell re-selection. The recommended value
for the parameter is 7(-12dB). The cell re-selection arbitration threshold

between WCDMA and GSM/GPRS systems, for example, there should

be the 4 dB distance between the WCDMA parameter SsearchRAT and
the GSM/GPRS parameter FDD_Qmin.
The parameter can be set 7 to raise the success rate of 2G -> 3G
re-selection.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

qsearch_C
Full Name
Initial parameter instead of qsearch_c before UE receiving qsearch_C
Abbreviation
qsearchCInit
Managed Object
UTRAN Measurement
3GPP Name
Qsearch_C_Initial
3GPP Reference
3GPP TS 45.008
This parameter is used to search and measure the cell while MS does not
Description
receive Qsearch_C on SACCH.
Instance
Cell
0: Qsearch_I
1: Always
2-1255
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Can be adjusted using the Qsearch_I

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.10 Threshold when UE performs search under dedicated mode

Full Name
Threshold when UE performs search under dedicated mode
Abbreviation
qsearch_C
Managed Object
UTRAN Measurement
3GPP Name
Qsearch_C
3GPP Reference
3GPP TS 45.008
This parameter defines a threshold value. When the average receiving
level (RLA_C) of this cell is lower than the lower threshold (0 to 6) of this
parameter or higher than the upper threshold (8 to 14) of this parameter,
the UE starts to search for 3G adjacent cells.
7: always
Description
15: never
Instance
Cell
0..15
2-1256
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
15
Default Value
Do not search the default

If the system is expected to support GSM ->
3G handover, it is not recommended to set this parameter 15. If the
system is not expected to support GSM->3G handover, the parameter

should be set 15.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.11 CS class of reported quantities of UTRAN adjacent cells

Full Name
CS class of reported quantities of UTRAN adjacent cells
Abbreviation
fddRepQntCs
Managed Object
UTRAN Measurement
3GPP Name
FDD_REP_QUANT
3GPP Reference
3GPP TS 45.008
Description
It indicates whether an MS uses RSCP or Ec/No to report measurement.
Instance
Cell
0:RSCP, receiving power of CPICH scramble of UTRAN cell at UE, the
unit is dbm
1:Ec/No, ratio of the receiving power to thermal noise of CPICH scramble
of UTRAN cell, the unit is db
2-1257
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
No reason
The default value is adopted. The value can
be adjust to "0" as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

report(CS)
Full Name
Max number of UTRAN/FDD adjacent cells in measurement report(CS)
Abbreviation
fddMulRatRrptCs
Managed Object
UTRAN Measurement
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
3GPP TS 45.008
This parameter indicates the maximum number of UTRAN/FDD adjacent
cells included in packet measurement report or strongest cell list. If
UTRAN/FDD adjacent cells are not full, the vacancies are used for
GSM adjacent cells. (If TDD technology is available, the vacancies are
Description
reserved for TDD cells)
Instance
Cell
0..3
2-1258
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Protocol recommended values
If 3G is preferred in 2/3G handover strategy,
this parameter can increase the number of 3G adjacent cells.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.13 Measurement threshold of UE performing GPRS UTRAN

cell_0/Measurement threshold of UE performing_1 GPRS
UTRAN cell
Measurement threshold of UE performing GPRS UTRAN cell_0/MeasureFull Name
ment threshold of UE performing_1 GPRS UTRAN cell
Abbreviation
qsearch_P
Managed Object
UTRAN Measurement
3GPP Name
Qsearch_P
3GPP Reference
3GPP TS 45.008
2-1259
SJ-20130408140048-016|2013-07-17(R1.0)
Qsearch_P is the threshold for UEs to start measuring 3G adjacent cell. It

is notified to the specified UE in the PACKET MEASUREMENT ORDER
or PACKET CELL CHANGE ORDER message. When the signal level is
lower than threshold 0 - 7 (corresponding to - 98, - 94, , - 74 dBm),
or greater than threshold 8 - 15 (- 78, - 74, ,- 54 dBm), the system
searches for 3G cells. The threshold 7 indicates always search and 15
Description
indicates never search.
Instance
Cell
0..15
Unit
N/A
Default Value
[15,15]
Default Value
initial value
This parameter is not carried in SI2quate. Even it is broadcast in
SI2quater, Qsearch_P in the SI2quater takes effect only after the PMO
or PCCO message of the adjacent cell information is sent on PACCH,
whereas the PMO or PCCO message also includes the Qsearch_P.
In this case, this parameter functions when it is sent to the MS in the
ttransmission state. The MS still uses the Qsearch_I parameter in idle
state.
The value 7 enables the MS to perform 3G adjacent cell measurement.
The value 15 enables the MS not to perform 3G adjacent cell

measurement.
The value 1-6 ensures that the level of the serving cell is lower than
that of threshold for measurement.
The value 8-14 ensures that the level of the serving cell is higher than
that of threshold for measurement.
IIn general, it is recommended to set this parameter to 7, to make PS
select 3G network.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1260
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.14 FDD GPRS reselection offset_0/FDD GPRS reselection

offset_1
Full Name
FDD GPRS reselection offset_0/FDD GPRS reselection offset_1
Abbreviation
fdd_Gprs_Qoffset
Managed Object
UTRAN Measurement
3GPP Name
FDD_GPRS_Qoffset
3GPP Reference
3GPP TS 45.008
This parameter defines the minimum offset with which the RSCP of the
reselected 3G FDD adjacent cell shall be higher than the RLA_P of the
serving cell and other suitable GSM adjacent cell. A one-dimensional
array is used to represent packet idle state parameter and packet
transmission state parameter. To enable a UE to reselect a 3G adjacent
cell, the following conditions must be met for at least 5 seconds:
CPICH Ec/No > = FDD_ Qmin FDD_Qmin_Offset
CPICH RSCP > RLA_P(s+n) + _FDD_GPRS_Qoffset
CPICH RSCP > = FDD_RSCP_Threshold
The parameters FDD_GPRS_Qoffset, FDD_Qmin, and
FDD_Qmin_Offsett are broadcast to the UE in the packet system
message PSI3quater.
RLA_P(s+n) defines the average value of the signal strengths of the
serving cell and n strongest GSM neighbor cells.
FDD_RSCP_Threshold = FDD_RSCPmin min((P_MAX 21 dBm), 3
dB) if FDD_RSCPmin is broadcast in the serving cell system message;
otherwise,
FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10 dB
0 indicates that the 3G FDD adjacent cell is always selected.
1 = -28 dB
2 = -24 dB
Description
15 = 28 dB
Instance
Cell
0..15
Unit
N/A
2-1261
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
[8,8]
Default Value
offset is 0dBm, recommended in 3GPP

If a user always expects to access the adjacent
cells of this 3G FDD, the parameter should be set 0. It is easier
to access the cells if the parameter is set smaller. If the strategy

is "prefer 3G network", the parameter should be set 0.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.15 TDD GPRS reselection offset_0/TDD GPRS reselection

offset_1
Full Name
TDD GPRS reselection offset_0/TDD GPRS reselection offset_1
Abbreviation
tdd_Gprs_Qoffset
Managed Object
UTRAN Measurement
3GPP Name
TDD_GPRS_Qoffset
3GPP Reference
3GPP TS 45.008
2-1262
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter defines the minimum offset with which the RSCP of the
reselected 3G TDD adjacent cell shall be higher than the RLA_P of the
serving cell and other suitable GSM adjacent cell. A one-dimensional
array is used to represent packet idle state parameter and packet
transmission state parameter. To enablle a UE to reselect a 3G adjacent
cell, the following conditions must be met for at least 5 seconds:
CPICH RSCP > RLA_P(s+n) + TDD_GPRS_Qoffset
The parameter TDD_GPRS_Qoffset is broadcast to the UE in the packet
system message PSI3quater.
0 indicates that the 3G TDD adjacent cell is always selected.
1 = -28 dB
2 = -24 dB
15 = 28 dB
In 2009, the above algorithm in 3GPP is updated to an absolute value
decision criteria: RSCP > = TDD_GPRS_Qoffset, that is, reselection is
triggered when the measured signal strength remains greater than or
equal to the TDD_GPRS_Qoffset for at least 5 seconds. In the absolute
value decision criteria, the mapping between the TDD_GPRS_Qoffset
value and signal strenth is as follows:
0 = -105dBm, 1 = -102dBm, 2=-99dBm, 3 = -96dBm, 4 = -93dBm, 5
= -90dBm, 6 = -87dBm, 7 = -84dBm, 8 = -81dBm, 9 = -78dBm, 10 =
-75dBm, 11 = -72dBm, 12 = -69dBm, 13 = -66dBm, 14 = -63dBm, 15 =
Description
-60dBm
Instance
Cell
0..15
Unit
N/A
Default Value
[8,8]
Default Value
offset is 0dBmaccording to old scheme, 0dBm is the recommended

value in 3GPP;according to the new scheme, the recommended value
is 5, -90dBm
For MS under old work mode, the parameter is
regarded as a relative offset. If a user always expects to access
the adjacent cells of this 3G TDD, the parameter should be set 0.

It is easier to access the cells if the parameter is set smaller.

If the strategy is "prefer 3G network", the parameter should be set
0. For MS under new work mode, the parameter is regarded as an
absolute
threshold. It is easier to access the cells if the parameter is set
smaller.
2-1263
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.16 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No

of UTRAN reselecting cell_1
PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
Full Name
reselecting cell_1
Abbreviation
fdd_QminPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_Qmin
3GPP Reference
3GPP TS 45.008
This parameter defines the minimum value with which the Ec/No of the
reselected 3G adjacent cell shall be higher than or equal to the current
cell. A one-dimensional array is used to represent packet idle state
parameter and packet transmission state parameter. To enable a UE to
reselect a 3G adjacent cell, the following conditions must be met for
at least 5 seconds:
FDD_Qmin_Offset are broadcast to the UE in the packet system
message PSI3quater.
Description
2-1264
SJ-20130408140048-016|2013-07-17(R1.0)

otherwise,
FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10 dB
0= -20dB, 1= -6dB, 2= -18dB, 3= -8dB, 4= -16dB, 5= -10dB, 6= -14dB,
7= -12dB.
Instance
Cell
0: -20dB
1: -6dB
2: -18dB
3: -8dB
4: -16dB
5: -10dB
6: -14dB
7: -12dB
Unit
N/A
Default Value
[7,7]
Default Value
miderate number
The higher the Ec/Io mapped by parameter value, the harder the
relselection to 3G FDD;the lower the Ec/Io, the easier the relselection
to 3G FDD.The relation between parameter value and reselection is

not linearity.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1265
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.17 FDD_QminPS Offset_0/FDD_QminPS Offset_1

Full Name
FDD_QminPS Offset_0/FDD_QminPS Offset_1
Abbreviation
fdd_Qmin_OffsetPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_Qmin_Offset
3GPP Reference
3GPP TS 45.008
A one-dimensional array is used to represent packet idle state parameter
and packet transmission state parameter. To enable a UE to reselect
a 3G adjacent cell, the following conditions must be met for at least
5 seconds:
FDD_Qmin_Offset are broadcast to the UE in the packet system
message PSI3quater.
otherwise, FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10
dB
0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, 4 = 8 dB, 5 = 10 dB, 6 = 12
Description
dB, 7 = 14 dB.
Instance
Cell
0..7
Unit
N/A
Default Value
[0,0]
Default Value
offset is 0dB
If the offset value is higher, it is easier
to handover to a 3G FDD cell during re-selection. If the offset value
is lower, it is harder to handover to a 3G FDD cell during re-selection.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
2-1266
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.18 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP

of UTRAN reselecting cell_1
PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
Full Name
reselecting cell_1
Abbreviation
fdd_RscpMinPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_RSCPmin
3GPP Reference
3GPP TS 45.008
This parameter defines the minimum RSCP threshold for a UTRAN
FDD cell to be reselected. It is broadcast to UEs in the packet system
message PSI3quater. A one-dimensional array is used to represent
packet idle state parameter and packet transmission state parameter.
To enable a UE to reselect a 3G adjacent cell, the following conditions
must be met for at least 5 seconds:
The parameters DD_GPRS_Qoffset, FDD_Qmin, and FDD_Qmin_Offset
are broadcast to the UE in the packet system message PSI3quater.
otherwise, FDD_RSCP_Threshold = Qrxlevmin + Pcompensation + 10
dB
0 = -114 dBm, 1 = -112 dBm, 2 = -110 dBm, 3 = -108 dBm, 4 = -106
dBm, 5 = -104 dBm, 6 = -102 dBm, 7 = -100 dBm, 8 = -98 dBm, 9 = -96
Description
dBm, 10 = -94 dBm, 11 = -92 dBm, 12 = -90 dBm, 13 = -88 dBm, 14 =
2-1267
SJ-20130408140048-016|2013-07-17(R1.0)
-86 dBm, 15 = -84 dBm. Note: The parameters in the formula are all
GPRS parameters, that is, the FDD_RSCPmin is FDD_RSCPminPS.
Instance
Cell
0..15
Unit
N/A
Default Value
[6,6]
Default Value
reffer to FDD_RSCPmin, the signal strength of -102dBm is enough for
UE stable work in FDD,

This parameter determines the minimum level

for 3G FDD cell. It is harder to access the cells if the parameter
is set higher. .
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.19 Measurement report threshold of Ec/No or RSCP(PS)

Full Name
Measurement report threshold of Ec/No or RSCP(PS)
Abbreviation
fddRprtTho2Ps
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1268
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the frequency that adjacent cells report measurement reports containing Ec/No or RSCP. As specified by REP_PRIORITY, the reporting frequency of cells with the lowest priority level is low.
However, at least one Ec/No or RSCP must be reported in every four meaDescription
surement reports.
Instance
Cell
0..63
Unit
N/A
Default Value
[0,0]
Default Value
Use the report measurement value that is recommended in the 3GPP
protocol.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.20 CS measurement reporting rate of adjacent cell

Full Name
CS measurement reporting rate of adjacent cell
Abbreviation
reportRateCs
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1269
SJ-20130408140048-016|2013-07-17(R1.0)
NCC in BSIC of some GSM cells are allowed, but BCC is invalid (that is,
the radio system does not have adjacent cells corresponding to BCC).
This parameter indicates whether the system allows UE to report field
Description
intensity of such cells (NCC is allowed but BCC us invalid).
Instance
Cell
0: Normal
1: Lower
Unit
N/A
Default Value
Default Value
Usually an adjacent cell can have a same frequency.

Not recommended to modify the parameter value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.21 CS UE report invalid cell level allowed

Full Name
CS UE report invalid cell level allowed
Abbreviation
invldBsicRprtCs
Managed Object
UTRAN Measurement
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
3GPP TS 45.008
2-1270
SJ-20130408140048-016|2013-07-17(R1.0)
NCC in BSIC of some GSM cells are allowed, but BCC is invalid (that is,
the radio system does not have adjacent cells corresponding to BCC).
This parameter indicates whether the system allows UE to report field
Description
intensity of such cells (NCC is allowed but BCC us invalid).
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
BCC does not know the adjacent cell, which

is not configured in BSC. The cell cannot be the target during handover
process.

This parameter is not set as "Yes".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.22 MulBndRprtCS
Full Name
MulBndRprtCS
Abbreviation
mulBndRprtCs
Managed Object
UTRAN Measurement
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
3GPP TS 45.008
2-1271
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is to control the number of reports of different adjacent

Description
cells except the serving cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
0
In a dual-frequency environment, the parameter
Default Value
can be set 0 to limit the traffic bearing, that is, the hand-in should
base on the signal strength, and adjacent cells in different frequency

bands should be treat with a same priority.
In a dual-frequency environment, the 900M cells
can be set to report as many 1800M cells as possible to make the
handover
conducted in 1800M frequency. This configuration is good to balance

the traffic and lower and reduce congestion. However, the success
ratio of handover, call drop ratio and coverage ratio might be affected.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.23 CS offset which is added when UE reports rxlev value

Full Name
CS offset which is added when UE reports rxlev value
Abbreviation
scaleOrdCs
Managed Object
UTRAN Measurement
2-1272
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
SCALE_ORD
3GPP Reference
3GPP TS 45.008
This parameter indicates the offset to be added when UE reports signal
field strength. If the actual field strength of a GSM adjacent cell is only
n dBm, the UE maps n+ ScaleOrdCS to the value that n shall map to
when mapping to RXLEV063. This is applicable only when the
"enhanced measurement report" message is used.
If the signal strength of the adjacent cell exceeds -48 dBm, the system
can use this parameter to report the actual value and the UE reports
the SCALE value in the "enhanced measurement report" message. If
SCALE_ORD=2, the UE uses a value that is just sufficient for reporting
Description
the cell with the strongest signal level.
Instance
Cell
0: 0 dB
1: 10 dB
2: Automatic
Unit
N/A
Default Value
Default Value
Values other than 0 can be used.
This parameter can be set 1 or 2 to view the
real level.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1273
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.24 GSM900M Adjacent cell reporting signal level Offset

Full Name
GSM900M Adjacent cell reporting signal level Offset
Abbreviation
rprtOffsetCs900
Managed Object
UTRAN Measurement
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
3GPP TS 45.008
Description
An offset can be added to a 900 M GSM adjacent cell.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
No configuration on the frequency bands and
access technologies.
This parameter should be set higher if more
handovers to GSM900M adjacent cells are expected to be conducted.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.25 GSM900M Adjacent cell reporting signal level Threshold

Full Name
GSM900M Adjacent cell reporting signal level Threshold
Abbreviation
rprtThoCs900
Managed Object
UTRAN Measurement
2-1274
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 45.008
The GSM 900 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS900 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
Whether it can be reported in certain period depends on signal level,
Description
RepPrioCS, MulBndRprtCS and RprtOffsetCS900.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
The measurement value is not limited during
the report of GSM 900 M adjacent cells.

If more GSM 900 M adjacent cells need to be

reported, the threshold should be set low; otherwise it should be
set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtOffsetCs1800
2-1275
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtThoCs1800
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1276
SJ-20130408140048-016|2013-07-17(R1.0)
in the cell is higher than or equal to RprtThoCS1800 (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV). As to whether it can be reported in certain period, it also depends on signal level, RepPrioPS, MulBndRprtPS
Description
and RprtOffsetPS900.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value


set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtOffsetCs1900
Managed Object
UTRAN Measurement
3GPP Name
2-1277
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtThoCs1900
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1278
SJ-20130408140048-016|2013-07-17(R1.0)
As to whether it can be reported in certain period, it also depends on
Description
signal level, RepPrioCS, MulBndRprtCS and RprtOffsetCS1900.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value


set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.30 UTRAN/FDD Adjacent cell reporting signal level Offset

Full Name
UTRAN/FDD Adjacent cell reporting signal level Offset
Abbreviation
fddRprtOffsetCs
Managed Object
UTRAN Measurement
3GPP Name
2-1279
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
An offset can be added to an FDD adjacent cell when the priority sequence
Description
of the hand-in adjacent cells are determined.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
handovers to FDD adjacent cells are expected to be conducted.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.31 UTRAN/FDD Adjacent cell reporting signal level Threshold

Full Name
UTRAN/FDD Adjacent cell reporting signal level Threshold
Abbreviation
fddRprtThoCs
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1280
SJ-20130408140048-016|2013-07-17(R1.0)
When reporting to UTRAN/FDD adjacent cells, only when signal level in

the cell is higher than or equal to FDDRprtThoCS (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. As to whether it can
be reported in certain period, it also depends on signal level, RepPrioCS,
Description
FDDMulRatRrptCS and FDDRprtOffsetCS.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
FDD
If more FDD adjacent cells are needed, the
threshold should be set low; otherwise it should be set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.32 Reporting threshold for the Ec/No or RSCP that is not

reported
Full Name
Reporting threshold for the Ec/No or RSCP that is not reported
Abbreviation
fddRprtTho2CS
Managed Object
UTRAN Measurement
3GPP Name
FDD_REPORTING_THRESHOLD_2
2-1281
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP TS 44.018
3GPP Reference
3GPP TS 45.008
This parameter is a new phase-II GSM/WCDMA interoperation
parameter, indicating the measurement report threshold of Ec/No or
RSCP that do not need to be reported.
In phase-I GSM/WCDMA interoperation, MSs are only required to report
the measurement result of Ec/NO or signal strength (RSCP). In phase-II,
MSs are required to consider both measurement results.
When it is requested that the class of reported quantities of 3G adjacent
cells is RSCP, this parameter indicates the threshold of Ec/No that needs
not be reported. Based on the parameter, the system excludes the
Description
adjacent cells whose RSCP does not meet the requirement.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
The default type that is required to report

by MS is Ec/No, so the default value is the RSCP measurement report
threshold that is not required to be reported.
measurement type reported by the MS.
Change Mode
Offline
Related features
Related Parameters
FDDRepQntCS
If FDDRepQntCS is 0, this parameter indicates the Ec/No threshold
Relationship
value that does not need to be reported;

If FDDRepQntCS is 1, this parameter indicates the Ec/No threshold
value that does not need to be reported;
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1282
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.33 CS UE search UTRAN adjacent cell in BSIC decoding frame

indication
Full Name
CS UE search UTRAN adjacent cell in BSIC decoding frame indication
Abbreviation
searchPrioCs3g
Managed Object
UTRAN Measurement
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
3GPP TS 45.008
This parameter indicates whether to allow UE to search UTRAN adjacent
cells in the frame where BSIC decoding is needed. If allowed, UE can
Description
use at most 25 frames for search in 13 seconds.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Searching for GSM adjacent cells.
If a user is expected to stay in 3G network,
this parameter should be set as "Yes".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1283
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
rprtThoCs850
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Whether it can be reported in certain period depends on signal level,
Description
RepPrioCS, MulBndRprtCS and RprtOffsetCS850.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value


set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1284
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
rprtOffsetCs850
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.36 TDD reselection offset

Full Name
TDD reselection offset
Abbreviation
tdd_Qoffset
Managed Object
UTRAN Measurement
2-1285
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
TDD_Qoffset
3GPP Reference
3GPP TS 45.008
This parameter indicates the RSCP threshold when the an MS is handed-
Description
over to a 3G TDD cell.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
When the RSCP of a TDD cell is -81 dBm, the
signals are strong.
This parameter can be set lower if the cell
re-selection to a TDD cell is expected to be easier.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

report(CS)
Full Name
Max number of UTRAN/TDD adjacent cells in measurement report(CS)
Abbreviation
tddMulRatRrptCs
Managed Object
UTRAN Measurement
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
3GPP TS 45.008
2-1286
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the maximum number of UTRAN/TDD adjacent

cells included in measurement report or strongest cell list. If UTRAN/TDD
adjacent cells are not full, the vacancies are used for GSM adjacent cells
Description
(If FDD technology is supported, remained part is given to FDD cell).
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
Hand in 2 TDD adjacent cells for selection.
If a user is expected to stay in TDD network,
the parameter can be set higher.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.38 UTRAN/TDD Adjacent cell reporting signal level Offset

Full Name
UTRAN/TDD Adjacent cell reporting signal level Offset
Abbreviation
tddRprtOffsetCs
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
An offset can be added to an TDD adjacent cell when the priority sequence
Description
of the hand-in adjacent cells are determined.

2-1287
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..7
Unit
dB
Default Value
Default Value
handovers to FDD adjacent cells are expected to be conducted.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.39 UTRAN/TDD Adjacent cell reporting signal level Threshold

Full Name
UTRAN/TDD Adjacent cell reporting signal level Threshold
Abbreviation
tddRprtThoCs
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
When reporting to UTRAN/TDD adjacent cells, only when signal level in
the cell is higher than or equal to TDDRprtThoCS (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. Whether it can be
reported in certain period depends on signal level, RepPrioCS, TDDMul-
Description
RatRrptCS and TDDRprtOffsetCS.
2-1288
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
the report of TDD adjacent cells.
If more TDD adjacent cells need to be reported,
the threshold should be set low; otherwise it should be set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.40 PS measurement type reported by UE

Full Name
PS measurement type reported by UE
Abbreviation
reportTypePs
Managed Object
UTRAN Measurement
3GPP Name
REPORT_TYPE
3GPP Reference
3GPP TS 44.060
2-1289
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used to indicate whether an MS uses the PACKET

MEASUREMENT REPORT or PACKET ENHANCED MEASUREMENT
REPORT messages for (NC) reporting. It is reported to the MS in
the PACKET CELL CHANGE ORDER or PACKET MEASUREMENT
ORDER
message.
0: If each frequency point in the BA (GPRS) list is configured with at least
one BSIC, PACKET ENHANCED MEASUREMENT REPORT is used
to report measurement result; otherwise, PACKET MEASUREMENT
REPORT is used.
1: PACKET MEASUREMENT REPORT is used to report measurement
Description
result.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
normally use PACKET MEASUREMENT REPORT, defaut value is 1 in
3GPP, so the default value should be changed to 1.

At least one BSIC is allocated for each frequency
point, and MS has received the BSIC from all adjacent cells. If the

measurement type parameter ReportTypePS is 0, MS will use the

enhanced
measurement report to measure the adjacent cell. If the above conditions
are not met, it is recommended to set the parameter as 1, using the
common measurement report.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1290
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.41 PS number of same frequency adjacent cells in report

Full Name
PS number of same frequency adjacent cells in report
Abbreviation
svrBandRprtPs
Managed Object
UTRAN Measurement
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
3GPP TS 45.008
The number of cells from the GSM serving frequency band that shall be
Description
included in the measurement report.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
refer to parameter SvrBandRpt
Refer to the CS configuration principle of
reported number of adjacent cells in a same frequency.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.42 PS class of reported quantities of UTRAN adjacent cells

Full Name
PS class of reported quantities of UTRAN adjacent cells
Abbreviation
fddRepQntPs
2-1291
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
UTRAN Measurement
3GPP Name
FDD_REP_QUANT
3GPP Reference
3GPP TS 45.008
Description
Indicates the reporting quantity for UTRAN FDD cells.0 = RSCP, 1 = Ec/No
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
refer to the FDDRepQntCS

If a UE is expected to report with RSCP, the
parameter should be set 0; if a UE is expected to report with Ec/Io,
the parameter should be set 1.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

report(PS)
Full Name
Max number of UTRAN/FDD adjacent cells in measurement report(PS)
Abbreviation
fddMulRatRrptPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_MULTIRAT_REPORTING
2-1292
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
The number of cells from the access technology/mode FDD (one or more)
that shall be included in the list of strongest cells or in the measurement
Description
report.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
refer to the FDDMulRatrrptCS
The parameter should be set higher if a UE
is expected to stay in FDD network.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.44 PS measurement reporting rate of adjacent cell

Full Name
PS measurement reporting rate of adjacent cell
Abbreviation
reportRatePs
Managed Object
UTRAN Measurement
3GPP Name
REPORTING_RATE
3GPP Reference
3GPP TS 45.008
Indicates the allowed reporting rate.0 = normal, 1 = reduced.
Description
Default value = normal.

2-1293
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
normal reporting rate, defaut value in 3GPP

Usually every adjacent cell is treated with
the same priority. When the adjacent cells with low priority need
hand-in in low frequency, the parameter ReportRatePS should be set

1.
Change Mode
Offline
Related features
Related Parameters
RepPrioPS
The parameter RepPrioPS configures every adjacent
Relationship
cell; the parameter RepRatePS configures the current cell. The two
parameters determines the measurement report hand-in frequency in
the adjacent cell.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.45 PS UE report invalid cell level allowed

Full Name
PS UE report invalid cell level allowed
Abbreviation
invldBsicRprtPs
Managed Object
UTRAN Measurement
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
3GPP TS 45.008
2-1294
SJ-20130408140048-016|2013-07-17(R1.0)
Indicates if GSM cells with invalid BSIC and allowed NCC part may be
reported.0 Report on cells with invalid BSIC and allowed NCC part of
BSIC is not allowed.
1 Report on cells with invalid BSIC and allowed NCC part of BSIC is
Description
allowed. In this case NCC_PERMITTED is required.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
BCC does not know the adjacent cell, which

is not configured in BSC. The cell cannot be the target during handover
process.

It is recommended to set as "No".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.46 PS multi-band report indication

Full Name
PS multi-band report indication
Abbreviation
mulBndRprtPs
Managed Object
UTRAN Measurement
3GPP Name
MULTIBAND_REPORTING
2-1295
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
MS in single-frequency GSM system needs only to report contents of
six adjacent cells with the strongest signals in a frequency band, when
reporting the survey result of adjacent cells to the network.
In multi-band networking, MS can enter with priority into a specific
frequency band during handover. The MS reports the survey result
according to the signal intensity and the frequency band of the signals,
according to the actual situation.
PS multiband report indication is used to notify MS to report contents
of adjacent cells in multiple frequency bands. It is one of the system
control parameters.
The setting of this parameter is subject to traffic in each frequency band.
General principles to set the parameters are as follows: 0: If the traffic
of each frequency band is almost equivalent, and the operator has
no choice over the frequency band. 3: If the traffic of each frequency
band is quite different, and the operator hopes that MS enters a specific
Description
frequency band with priority.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
according to signal strength, all frequency bands are in same level

If hope to report some number of neighbour cells in each frequency
band, the paremeter should be value except 0.In 900M/1800M network,

the parameter should be 3 of 900M cells and 1 of 1800M cells in order to

absorb traffic in 1800M cells;If not hope some frequency band to absorb
traffic, the parameter value should be 0.Reasonable configuration this
parameter can abtain traffic balance and avoid congestion, but may
effect establish successful rate, drop rate and coverage.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1296
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.47 PS offset which is added when UE reports RXLEV value

Full Name
PS offset which is added when UE reports RXLEV value
Abbreviation
scaleOrdPs
Managed Object
UTRAN Measurement
3GPP Name
SCALE_ORD
3GPP Reference
3GPP TS 45.008
This parameter SCALE_ORD indicates the offset used for the reported
RXLEV values in the PACKET ENHANCED MEASUREMENT REPORT
message.
The signal level shall be mapped to an RXLEV value between 0 and
63, as follows:
RXLEV 0 = less than 110 dBm + SCALE.
RXLEV 1 = 110 dBm + SCALE to 109 dBm + SCALE.
:
:
RXLEV 63 = greater than 48 dBm + SCALE.
where, SCALE is defined by the SCALE_ORD parameter in the PACKET
CELL CHANGE ORDER and PACKET MEASUREMENT ORDER
messages.
The MS indicates the SCALE value to be used in the PACKET
ENHANCED MEASUREMENT REPORT message.
If the actual field strength of a GSM adjacent cell is only n dBm, the UE
maps n+ SCALE_ORD to the value that n shall map to when mapping
to RXLEV063. This is applicable only when the PACKET
ENHANCED MEASUREMENT REPORT message is used.
If the signal strength of the adjacent cell exceeds -48 dBm, the system
can use this parameter to report the actual value and the UE reports the
SCALE value in the PACKET ENHANCED MEASUREMENT REPORT
message. If SCALE_ORD=2, the UE uses a minimum offset, which is
Description
sufficient for reporting the cell with the strongest signal level.
2-1297
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
used in the ENHANCED MEASUREMENT REPORT and PACKET
ENHANCED MEASUREMENT REPORT

When each frequency point is allocated with a BSIC at least, the MS
has received all adjacent cells' BSIC, and the ReportTypePS parameter
is 0, the MS uses the enhanced measurement report, to measure the
adjacent cell more accurately.
The value 0 indicates that there is no offset, and the reported
measurement result is mapped in accordance with the actual level.
The value 1 indicates that the offset is 10 dB, the range of the level to be
reported is adjusted as -100 dB to -38 dB. That is, the level value mapped
to 0~63 increases by 10 dB, which suits for high adjacent cell level.
The value 2 indicates that SCALE value is the minimum offset value that
can be reported in the strongest adjacent cell. For example, if the signal
strength in the strongest adjacent cell is -30dB, the SCALE value is 18,
to ensure that all adjacent cells can ba mapped to be reported.
In general, the value is 0 when there is no need for an offset. The value
can be adjusted as 1 or 2 as required for the adjacent cell with special
signal strength.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1298
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.48 GSM 900 Offset(PS)

Full Name
GSM 900 Offset(PS)
Abbreviation
rprtOffsetPs900
Managed Object
UTRAN Measurement
3GPP Name
900_REPORTING_OFFSET
3GPP Reference
3GPP TS 45.008
Apply en offset to the reported value when prioritising the cells for report-
Description
ing for GSM frequency band 900.0, 6, , 42 dB Default value = 0 dB.
Instance
Cell
0..7
Unit
dB
Default Value
Default Value
recommended in 3GPP
It is easier to be chosen for measurement report
hand-in if the value is bigger.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.49 GSM 900 Threshold(PS)

Full Name
GSM 900 Threshold(PS)
Abbreviation
rprtThoPs900
2-1299
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
UTRAN Measurement
3GPP Name
900_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 45.008
Apply priority reporting if the reported value is above threshold for GSM
frequency band 900.0, 6, , 36, (never).
Description
Default value = always.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
A cell is easier to be chosen for measurement
report if the value is smaller and vice versa.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
GSM 1800 Offset(PS)
Abbreviation
rprtOffsetPs1800
Managed Object
UTRAN Measurement
3GPP Name
2-1300
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
dB
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtThoPs1800
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Description

2-1301
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
GSM 1900 Offset(PS)
Abbreviation
rprtOffsetPs1900
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
dB
2-1302
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtThoPs1900
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
2-1303
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.54 UTRAN/FDD Offset

Full Name
UTRAN/FDD Offset
Abbreviation
fddRprtOffsetPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_REPORTING_OFFSET
3GPP Reference
3GPP TS 45.008
This parameter indicates the offset for the reported value when UTRAN
FDD sorts cells. It is sent to MSs in the PACKET MEASUREMENT ORDER or PACKET CELL CHANGE ORDER message over PACCH. When
the system reports UTRAN/FDD neighbor cells, if there are two cells with
signals greater than or equal to FDDRprtThoPS and the RepPrioPS values are the same, then the cell whose sum value of signal level and FD-
Description
DRprtOffsetPS is greater is reported in priority.
Instance
Cell
0..7
Unit
dB
Default Value
2-1304
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.55 UTRAN/FDD Threshold

Full Name
UTRAN/FDD Threshold
Abbreviation
fddRprtThoPs
Managed Object
UTRAN Measurement
3GPP Name
FDD_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 45.008
This parameter indicates the UTRAN FDD measurement report threshold.
It is broadcast to MSs in the PACCHPACKET MEASUREMENT ORDER or PACKET CELL CHANGE ORDER message over PACCH. When
reporting to UTRAN/FDD adjacent cells, only when signal level in the cell
is higher than or equal to FDDRprtThoPS (dimensionless, corresponding
to RXLEV portion in measurement report, different mapping relationship
for different RXLEV), it can be reported. As to whether it can be reported
in certain period, it also depends on signal level, RepPrioPS, FDDMulRa-
Description
tRrptPS and FDDRprtOffsetPS.
Instance
Cell
0..7
2-1305
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.56 PS UE search UTRAN adjacent cell in basic decoding frame

indication
Full Name
PS UE search UTRAN adjacent cell in basic decoding frame indication
Abbreviation
searchPrioPs3g
Managed Object
UTRAN Measurement
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
3GPP TS 45.008
This parameter indicates whether UEs are allowed to search for UTRAN
neighbor cells when BSIC decoding is required. If UTRAN neighbor cell
search is allowed, a UE can use a maximum of 25 frames to search for
UTRAN neighbor cells within 13 seconds.
This parameter is sent to UEs through a PACKET MEASUREMENT
ORDER or PACKET CELL CHANGE ORDER message on PACCH.
0: No
Description
1: Yes
2-1306
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
refer to CS parameter SearchPrioPS3G
If a user is expected to stay in 3G network,
this parameter should be set as "Yes".
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rprtThoPs850
Managed Object
UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1307
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates a threshold for reporting GSM 850 M neighbor

cells. It is sent to MSs through a PACKET MEASUREMENT ORDER or
PACKET CELL CHANGE ORDER message on PACCH.
A GSM 850 M neighbor cell can be reported only when the signal level
in the cell is equal to or greater than RprtThoPS850. The signal level (no
dimension) corresponds to the RXLEV part in a measurement report.
Different RXLEV values have different mapping relationships. Whether
the GSM 850 M neighbor cell is reported in a specific period depends on
Description
the signal level, RepPrioPS, MulBndRprtPS, and RprtOffsetPS850.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
GSM 850 Offset(PS)
Abbreviation
rprtOffsetPs850
Managed Object
UTRAN Measurement
2-1308
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
3GPP Reference
3GPP TS 45.008
This parameter specifies an offset for sorting GSM 850 M neighbor cells
to be reported. It is sent to MSs through a PACKET MEASUREMENT
ORDER or PACKET CELL CHANGE ORDER message on PACCH.
If the signal levels of two GSM 850 M neighbor cells are equal to or
greater than RprtThoPS850, and their RprtThoPS850 values are equal,
the cell with the greater sum of signal level and RprtOffsetPS850 is
Description
reported first.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

report(PS)
Full Name
Max number of UTRAN/TDD adjacent cells in measurement report(PS)
2-1309
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
tddMulRatRrptPs
Managed Object
UTRAN Measurement
3GPP Name
TDD_MULTIRAT_REPORTING
3GPP Reference
3GPP TS 45.008
This parameter specifies the maximum number of UTRAN/TDD neighbor
cells in PS measurement reports or the list of strongest cells. It is sent to
MSs through a PACKET MEASUREMENT ORDER or PACKET CELL
CHANGE ORDER message on PACCH.
If the actual number of UTRAN/TDD neighbor cells does not reach the
maximum number, the remaining quota is reserved for GSM neighbor
cells. (If the system supports FDD, the remaining quota is reserved for
Description
FDD cells when there is still remaining.)
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
refer to the TDDMulRatrrptCS
The parameter should be set higher if a UE
is expected to stay in TDD network.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1310
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.60 UTRAN/TDD Offset

Full Name
UTRAN/TDD Offset
Abbreviation
tddRprtOffsetPs
Managed Object
UTRAN Measurement
3GPP Name
TDD_REPORTING_OFFSET
3GPP Reference
3GPP TS 45.008
This parameter indicates the offset for the reported value when UTRAN
TDD sorts cells. It is sent to MSs in the PACKET MEASUREMENT ORDER or PACKET CELL CHANGE ORDER message over PACCH. When
the system reports UTRAN/TDD neighbor cells, if there are two cells with
signals greater than or equal to TDDRprtThoPS and the RepPrioPS values are the same, then the cell whose sum value of signal level and TD-
Description
DRprtOffsetPS is greater is reported in priority.
Instance
Cell
0..7
Unit
dB
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1311
SJ-20130408140048-016|2013-07-17(R1.0)
2.27.61 UTRAN/TDD Threshold

Full Name
UTRAN/TDD Threshold
Abbreviation
tddRprtThoPs
Managed Object
UTRAN Measurement
3GPP Name
TDD_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 45.008
This parameter indicates a singal level threshold for reporting
UTRAN TDD neighbor cells. It is sent to MSs through a PACKET
MEASUREMENT ORDER or PACKET CELL CHANGE ORDER
message on PACCH.
A UTRAN TDD neighbor cell can be reported only when the signal level
in the cell is equal to or greater than TDDRprtThoPS. The signal level
(no dimension) corresponds to the RXLEV part in a measurement report.
Different RXLEV values have different mapping relationships. Whether
the UTRAN TDD neighbor cell is reported in a specific period depends on
Description
the signal level, RepPrioPS, TDDMulRatRrptPS, and TDDRprtOffsetPS.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
recommended in 3GPP
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1312
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.27.62 Reselect priority control of 2G/3G

Full Name
Reselect priority control of 2G/3G
Abbreviation
serviceCc
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the priority control mode for 2G/3G cell
reselection.
Value range: 0-5
0: Reselecting 3G cells first
1: Not reselecting 3G cells first
2: Reselection to 3G cells not allowed
3: The priority depends on SGSN (default: reselecting 3G cells first)
4: The priority depends on SGSN (default: not reselecting 3G cells first)
5: The priority depends on SGSN (default: reselection to 3G cells not
allowed)
This parameter is valid when Network Controlled Cell Reselection
Description
(NCCR) is enabled with NC2Support=1 and NMO=1 (NC2).
Instance
Cell
0:3G re-selection preferred
1:3G re-selection not preferred
2:3G re-selection not allowed
3:Based on the information from SGSN,3G re-selection preferred by
default
4:Based on the information from SGSN,3G re-selection not preferred by
default
5:Based on the information from SGSN,3G re-selection not allowed by
default
Unit
N/A
Default Value
Default Value
Usually PS services for 3G are better than
those for 2G.
Adjust according to 2/3G inter-working strategy
(3G preferred, or 2G preferred).
Change Mode
Offline
2-1313
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.63 Max Number In Adjacent GSM cell

Full Name
Max Number In Adjacent GSM cell
Abbreviation
indexStartEmr
Managed Object
UTRAN Measurement
3GPP Name
Absolute_Index_Start_EMR
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the maximum number of GSM adjacent cells.
Instance
Cell
32..64
Unit
N/A
Default Value
32
Default Value
Usually 32 adjacent cells are enough.

radio network planning. It is set 32 or more just when more than 32
adjacent cells are needed.
Change Mode
Offline
Related features
ZGB-02-02-004 Support 64 Neighboring Cells
Related Parameters
N/A
Relationship
N/A
2-1314
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.64 A minimum threshold of RSCP for UTRAN FDD cell

re-selection
Full Name
A minimum threshold of RSCP for UTRAN FDD cell re-selection
Abbreviation
fdd_RscpMin
Managed Object
UTRAN Measurement
3GPP Name
FDD_RSCPmin
3GPP Reference
3GPP TS 45.008
When this parameter is being broadcast in the system messages, RSCP
threshold in FDD cell re-selection is FDD_RSCPmin min((P_MAX
21 dBm), 3 dB). P_MAX is the maximum transmission power of an MS
under FDD mode.
This parameter is broadcast to MS through SI2quater on BCCH, and is
Description
broadcast to MS through PSI3quater on PBCCH and PACCH.
Instance
Cell
0..15
Unit
dBm
Default Value
Default Value
Under FDD mode, -102 dB RSCP is enough.
If this parameter is set lower, it is easier
for MS to handover to FDD cell during cell re-selection.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1315
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.65 Applies an offset to FDD_Qmin value

Full Name
Applies an offset to FDD_Qmin value
Abbreviation
fdd_Qmin_Offset
Managed Object
UTRAN Measurement
3GPP Name
FDD_Qmin_Offset
3GPP Reference
3GPP TS 45.008
This parameter indicates the FDD_Qmin parameter offset. When FDD
adjacent cell re-selection is being conducted, the Ec/No (code-noise ratio)
Description
is high than or equal to FDD_Qmin - FDD_Qmin_Offset.
Instance
Cell
0..7
Unit
db
Default Value
Default Value
FDD_Qmincan be indicates the Ec/No requirement
for FDD adjacent cell re-selection.
If a 3G adjacent cell is expected to be selected,
this parameter should be set high.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
2-1316
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.66 Service UTRAN CCO support

Full Name
Service UTRAN CCO support
Abbreviation
utranCcoSupp
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether 2G/3G priority control policy is applied
during PS reselection/handover. The priority control policy is defined
through the parameter CCOStrategy and negotiated by BSC and SGSN,
as shown in the following table:
2G/3G Priority Control Policy
3G reselection/handover preferred 2G reselection/handover preferred
3G reselection/handover forbidden
3G reselection/handover preferred 3G reselection/handover forbidden
2G reselection/handover preferred 3G reselection/handover forbidden
3G reselection/handover forbidden 3G reselection/handover forbidden
3G reselection/handover forbidden 3G reselection/handover forbidden
Object to SGSN, 3G reselection/handover preferred by default, value
on SGSN is used, if SGSN has no Service UTRAN CCO, default value
on BSC is used.
Object to SGSN, 2G reselection/handover preferred by default
Description
Object to SGSN, 3G reselection/handover forbidden by default
Instance
Cell
1: Support
Unit
N/A
0: Not Support
2-1317
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

This parameter is enabled if the 2/3G interworking
for GPRS is needed. Otherwise, it is disabled. This function is related
to the function of NCCR and PS. Currently, it is recommended not to

enable this function.
Change Mode
Offline
Related features
ZGO-02-03-004 Inter-system NCCR
Related Parameters
PSUTRANCCOSupp
Relationship
After BSCPSUTRANCCOSupp is enabled, this parameter is valid.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.27.67 Signal strength and load and capacity priority

Full Name
Signal strength and load and capacity priority
Abbreviation
StrenLoadCapaPri
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
Description
Signal strength and load and capacity priority
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
Unless otherwise specified, the signal strength
is used as the reselection judgment condition.

2-1318
SJ-20130408140048-016|2013-07-17(R1.0)


according operator requirements. For balance based on load, select
1. For balance based on capacity, select 2..
Change Mode
Offline
Related features
N/A
Related Parameters
NC2For23G
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.27.68 Signal strength threshold

Full Name
Signal strength threshold
Abbreviation
StrenThr
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the signal strength threshold of a 3G cell for
3G cell reselection. When the signal strength in a 3G cell is greater than
this threshold, this cell can be reselected during cell reselection. The
following provides the mapping relationships between the parameter
values and signal strengths.
0: -105dBm
1: -102dBm
2: -99dBm
3: -96dBm
4: -93dBm
5: -90dBm
6: -87dBm
Description
7: -84dBm
2-1319
SJ-20130408140048-016|2013-07-17(R1.0)
8: -81dBm
9: -78dBm
10: -75dBm
11: -72dBm
12: -69dBm
13: -66dBm
14: -63dBm
15: -60dBm
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
In the case of normal UE access, use the lowest
signal strength.
When there are high requirements on the signal
strength in the reselected target 3G cell of the UE, it is recommended
that this parameter be configured relatively large. Otherwise, lower

this value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.27.69 Load threshold

Full Name
Load threshold
Abbreviation
LoadThr
2-1320
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the threshold of maximum access load for the
3G cell that is reselected to the 3G adjacent cell. If the load is lower than
Description
this threshold, the value is acceptable.
Instance
Cell
0..100
Unit
Default Value
60
Default Value
According to the load balancing principle,

the cell load cannot be excessively high after the UE is reselected
to a 3G cell.
It is required to configure the expected load

that can be acceptable by the target 3G cell. If the 2G PS service

is busy, this parameter can be configured relatively high when the
3G service is not congested. This facilitates the UE to be reselected
to the 3G cell. On the contrary, lower the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.27.70 Available capacity threshold

Full Name
Available capacity threshold
2-1321
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
CapaThr
Managed Object
UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the threshold of remaining access capacity
for the 3G cell that is reselected to the 3G adjacent cell. If the remaining
Description
access capacity is higher than this threshold, the value is acceptable.
Instance
Cell
1..100
Unit
Default Value
40
Default Value
According to the load balancing principle,

number of subscribers accessed by a cell cannot be excessively low
after the UE is reselected to the 3G cell.
It is required to configure the expected remaining

access capacity that can be acceptable by the target 3G cell. If the

2G PS service is busy, this parameter can be configured relatively
low when the 3G service is not congested. This facilitates the UE
to be reselected to the 3G cell. On the contrary, increase the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2-1322
SJ-20130408140048-016|2013-07-17(R1.0)
2.28 E-UTRAN Measurement (GEutranMeasure)

2.28.1 E-UTRAN Measurement ID
Full Name
E-UTRAN Measurement ID
Abbreviation
GEutranMeasure
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
N/A
Description
E-UTRAN Measurement ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->E-UTRAN Measurement
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1323
SJ-20130408140048-016|2013-07-17(R1.0)

qsearch_C
Full Name
Initial parameter instead of qsearch_c before UE receiving qsearch_C
Abbreviation
qsearchCInit
Managed Object
E-UTRAN Measurement
3GPP Name
Qsearch_C_E-UTRAN_Initial
3GPP Reference
N/A
This parameter indicates the parameter used before the QSearchC parameter is acquired. If the value of this parameter ranges from 0 to 7,
the system searches EUTRAN adjacent cells when the signal strength is
lower than that corresponding to the value. If the value of this parameter
ranges from 8 to 15, the system searches EUTRAN cells when the UE
Description
signal strength is higher than that corresponding to the value.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1324
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.3
Full Name
Abbreviation
repQuant
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
3GPP TS 44.018
This parameter determines the type of LTE adjacent cells reported in the
Description
measurement report.
Instance
Cell
0: RSRP(RSRP)
1: RSRQ(RSRQ)
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1325
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.4 Max number of E-UTRAN adjacent cells in measurement

report
Full Name
Max number of E-UTRAN adjacent cells in measurement report
Abbreviation
mulRatRrpt
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_MULTIRAT_REPORTING
3GPP Reference
3GPP TS 44.018
This parameter determines the maximum number of LTE adjacent cells
(GPRS) supported in the measurement report or the list of cells with the
Description
strongest signal strength.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1326
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.5 FDD Measurement report threshold of RSRP or RSRQ in 6-bit

Full Name
FDD Measurement report threshold of RSRP or RSRQ in 6-bit
Abbreviation
fddRptthresh
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_FDD_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 44.018
This parameter determines the threshold for reporting RSRP or RSRQ
(specified in RepQuant) measurement reports when the type of FDD mea-
Description
surement report is 6-bit.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1327
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.6 FDD Measurement report threshold of RSRQ or RSRP in

6-bit reporting
Full Name
FDD Measurement report threshold of RSRQ or RSRP in 6-bit reporting
Abbreviation
fddRptthresh2
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_FDD_REPORTING_THRESHOLD_2
3GPP Reference
3GPP TS 44.018
(not specified in RepQuant) measurement reports when the type of FDD
Description
measurement report is 6-bit.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1328
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.7 TDD Measurement report threshold of RSRP or RSRQ in

6-bit reporting
Full Name
TDD Measurement report threshold of RSRP or RSRQ in 6-bit reporting
Abbreviation
tddRptthresh
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_TDD_REPORTING_THRESHOLD
3GPP Reference
3GPP TS 44.018
(not specified in RepQuant) measurement reports when the type of TDD
Description
Instance
Cell
0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
7: never
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1329
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.28.8 TDD Measurement report threshold of RSRQ or RSRP in

6-bit reporting
Full Name
TDD Measurement report threshold of RSRQ or RSRP in 6-bit reporting
Abbreviation
tddRptthresh2
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_TDD_REPORTING_THRESHOLD_2
3GPP Reference
3GPP TS 44.018
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1330
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.9 FDD Measurement report threshold of RSRP or RSRQ in

3-bit reporting
Full Name
FDD Measurement report threshold of RSRP or RSRQ in 3-bit reporting
Abbreviation
fddMeasRptOffset
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_FDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
3GPP TS 44.018
This parameter determines the calculated mapping value of RSRP or
RSRQ (specified in RepQuant) parameters when the type of FDD mea-
Description
surement report is 3-bit.
Instance
Cell
{repQuant==0}[0..63],
{repQuant==1}[0..30]
Unit
N/A
Default Value
Default Value
according to the protocol.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1331
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.10 FDD Measurement report threshold of RSRQ or RSRP in

3-bit reporting
Full Name
FDD Measurement report threshold of RSRQ or RSRP in 3-bit reporting
Abbreviation
fddMeasRptthresh2
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
(not specified in RepQuant) measurement reports when the type of FDD
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1332
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.11 TDD Measurement report threshold of RSRP or RSRQ in

3-bit reporting
Full Name
TDD Measurement report threshold of RSRP or RSRQ in 3-bit reporting
Abbreviation
tddMeasRptOffset
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_TDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
3GPP TS 44.018
This parameter determines the offset value in RSRP or RSRQ (specified
in RepQuant) measurement reports when the type of TDD measurement
Description
report is 3-bit.
Instance
Cell
{repQuant==0}[0..63],
{repQuant==1}[0..30]
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1333
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.12 TDD Measurement report threshold of RSRQ or RSRP in

3-bit reporting
Full Name
TDD Measurement report threshold of RSRQ or RSRP in 3-bit reporting
Abbreviation
tddMeasRptthresh2
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
Description
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1334
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.13 Measurement report threshold offset of RSRQ or RSRP

in 3-bit reporting
Full Name
Measurement report threshold offset of RSRQ or RSRP in 3-bit reporting
Abbreviation
rptGranularity
Managed Object
E-UTRAN Measurement
3GPP Name
REPORTING_GRANULARITY
3GPP Reference
3GPP TS 44.018
This parameter determines the offset value in RSRP or RSRQ measure-
Description
ment reports when the type of measurement report is 3-bit.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1335
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.14 Measurement threshold of UE performing GPRS E-UTRAN

Cell
Full Name
Measurement threshold of UE performing GPRS E-UTRAN Cell
Abbreviation
qsearchP_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
Qsearch_P_E-UTRAN
3GPP Reference
3GPP TS 44.018
This parameter determines the threshold used when the UE starts measurement on reselection of a GPRS LTE cell. If the value of this parameter
ranges from 0 to 7, the system searches EUTRAN adjacent cells when the
signal strength is lower than that corresponding to the value. If the value
of this parameter ranges from 8 to 15, the system searches EUTRAN
cells when the UE signal strength is higher than that corresponding to the
Description
value.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1336
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.15 GPRS max number of E-UTRAN adjacent cells in

measurement report
Full Name
GPRS max number of E-UTRAN adjacent cells in measurement report
Abbreviation
mulRatRpt_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
3GPP TS 44.018
This parameter determines the maximum number of LTE adjacent cells
(GPRS) supported in the measurement report or the list of cells with the
Description
strongest signal strength.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1337
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.16
Full Name
Abbreviation
repQuant_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
This parameter determines the type of GPRS LTE adjacent cells in the
Description
measurement report.
Instance
Cell
0: RSRP(RSRP)
1: RSRQ(RSRQ)
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1338
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.17 GPRS FDD Measurement report threshold of RSRP or RSRQ

Full Name
GPRS FDD Measurement report threshold of RSRP or RSRQ
Abbreviation
fddRptThresh_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
This parameter determines the threshold for reporting GPRS RSRP or
RSRQ (specified in RepQuant) measurement reports when the type of
Description
FDD measurement report is 6-bit.
Instance
Cell
0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
7: never
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1339
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.28.18 GPRS FDD Measurement report threshold of RSRQ or RSRP

Full Name
GPRS FDD Measurement report threshold of RSRQ or RSRP
Abbreviation
fddRptThresh2_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
RSRQ (not specified in RepQuant) measurement reports when the type
Description
of FDD measurement report is 6-bit.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1340
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.19 GPRS TDD Measurement report threshold of RSRP or RSRQ

Full Name
GPRS TDD Measurement report threshold of RSRP or RSRQ
Abbreviation
tddRptThresh_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
Description
of TDD measurement report is 6-bit.
Instance
Cell
0: 0(0)
1: 6(6)
2: 12(12)
3: 18(18)
4: 24(24)
5: 30(30)
6: 36(36)
7: never
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1341
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.28.20 GPRS TDD Measurement report threshold of RSRQ or RSRP

Full Name
GPRS TDD Measurement report threshold of RSRQ or RSRP
Abbreviation
tddRptThresh2_Ps
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
3GPP TS 44.018
Description
of TDD measurement report is 6-bit.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1342
SJ-20130408140048-016|2013-07-17(R1.0)
2.28.21 RxLevel Threshold for Measure E-UTRAN Neighbour Cell In

Dedicated Mode
RxLevel Threshold for Measure E-UTRAN Neighbour Cell In Dedicated
Full Name
Mode
Abbreviation
QSearchC
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter defines a threshold. If the receiving level of the local cell
is lower than this threshold (meaning the parameter value is 0-6) or higher
than the threshold (meaning the parameter value is 8-14), the UE starts
searching for E-UTRAN neighbor cells. 7 means always and 15 means
Description
never.
Instance
Cell
0:below - 98dBm
1:below - 94dBm
2:below - 90dBm
3:below -86dBm
4:below -82dBm
5:below -78dBm
6:below -74dBm
7:always
8:above - 78dBm
9:above -74dBm
10:above -70dBm
11:above -66dBm
12:above -62dBm
13:above -58dBm
14:above -54dBm
15:never
Unit
N/A
Default Value
Default Value
Set it to 7 so that MSs can detect E_UTRAN neighbor cells in the
shortest time and prepare for a handover.

Adjust this parameter based on the network condition so that the system
starts E-UTRAN neighbor cell measurement when the local cell level is
higher or lower than a specified value.
Change Mode
Offline
Related features
N/A
2-1343
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.28.22 Slippery window size for calculating average value of

E-Utran Neighbour Cell
Slippery window size for calculating average value of E-Utran Neighbour
Full Name
Cell
Abbreviation
WindowEutran
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Slippery window size for calculating average value of E-Utran Neighbour
Description
Cell
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Sufficient samples should be provided to ensure accuracy of E_UTRAN
neighbor cell signals.

If this parameter is set too low, the signal information of E_UTRAN
neighbor cells may be inaccurate due to occasional signal fluctuation.
If the parameter is set too high, the latest E_UTRAN neighbor signals
cannot be represented.
Change Mode
Offline
Related features
N/A
2-1344
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.28.23 offset to the reported value when prioritizing the FDD

E-UTRAN cells for 6bit reporting
offset to the reported value when prioritizing the FDD E-UTRAN cells for
Full Name
6bit reporting
Abbreviation
FDDRptOffset6bit
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
offset to the reported value when prioritising the FDD E-UTRAN cells for
Description
6bit reporting
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Generally, neighbor cells of different types have no difference in priority.
Set this parameter to a larger value if FDD E_UTRAN neighbor cell are
expected to be reported in priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1345
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.28.24 offset to the reported value when prioritizing the TDD

offset to the reported value when prioritizing the TDD E-UTRAN cells for
Full Name
6bit reporting
Abbreviation
TDDRptOffset6bit
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
offset to the reported value when prioritising the TDD E-UTRAN cells for
Description
6bit reporting
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Set this parameter to a larger value if TDD E_UTRAN neighbor cell are
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1346
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New

Full Name
3bit reporting
Abbreviation
FDDRptOffset3bit
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
3bit reporting
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Set this parameter to a larger value if FDD E_UTRAN neighbor cell are
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1347
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New

Full Name
3bit reporting
Abbreviation
TDDRptOffset3bit
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
3bit reporting
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Set this parameter to a larger value if TDD E_UTRAN neighbor cell are
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1348
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New

E-UTRAN cells for PS
Full Name
PS
Abbreviation
FDDRptOffset_PS
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
PS
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
For PS service, set this parameter to a larger value if FDD E_UTRAN
neighbor cell are expected to be reported in priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1349
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New

E-UTRAN cells for PS
Full Name
PS
Abbreviation
TDDRptOffset_PS
Managed Object
E-UTRAN Measurement
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
PS
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
For PS service, set this parameter to a larger value if TDD E_UTRAN
neighbor cell are expected to be reported in priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1350
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.28.29 offset to the reported value when prioritising the FDD

E-UTRAN cells for PS in packet tranfer mode
offset to the reported value when prioritising the FDD E-UTRAN cells for PS
Full Name
in packet tranfer mode
Abbreviation
FDDRptOffset_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
E UTRAN_FDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
45.008
This parameter specifies the offset of the reported value when prioritizing
Description
the FDD E-UTRAN cells for the PS in packet transfer mode.
Instance
Cell
0..7 (For the RSRP, the mapping is as follows: 0 = -140 dBm, 1 = -139 dBm,
2 = -138 dBm, , 62 = -78 dBm, 63 = -77 dBm. For the RSRQ, the mapping
is as follows: 0 = -19.5 dB, 1 = -19 dB, 2 = -18.5 dB, , 29 = -4 dB, 30 =
-3.5 dB.)
Unit
N/A
Default Value
Default Value
Consistent with the parameter in packet idle mode

This parameter can be set greater than the parameter FDDRptOffset_PS
if the adjacent FDD E-UTRAN cells are expected to be prioritized for the
PS in packet transfer mode over in packet idle mode.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1351
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.30 GPRS FDD Measurement report threshold of RSRQ or

RSRP in packet tranfer mode
GPRS FDD Measurement report threshold of RSRQ or RSRP in packet
Full Name
tranfer mode
Abbreviation
FDDRptThresh2_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
45.008
This parameter specifies the GPRS FDD 6-bit measurement report thresh-
Description
old of the RSRQ or RSRP (RepQuant unspecified) in packet transfer mode.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value

Configured according to the network requirements in packet transfer mode
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1352
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
NO
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.31 GPRS FDD Measurement report threshold of RSRP or

RSRQ in packet tranfer mode
GPRS FDD Measurement report threshold of RSRP or RSRQ in packet
Full Name
tranfer mode
Abbreviation
FDDRptThresh_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
45.008
This parameter specifies the GPRS FDD 6-bit measurement report thresh-
Description
old of the RSRP or RSRQ (RepQuant specified) in packet transfer mode.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-1353
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.32 GPRS max number of E-UTRAN adjacent cells in

measurement report in packet tranfer mode
GPRS max number of E-UTRAN adjacent cells in measurement report in
Full Name
packet tranfer mode
Abbreviation
MulRatRpt_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
45.008
This parameter specifies the maximum number of adjacent LTE cells in a
Description
measurement report or a strongest cell list in packet transfer mode (GPRS).
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

2-1354
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.33 Measurement threshold of UE performing GPRS E-UTRAN

Cell in packet tranfer mode
Measurement threshold of UE performing GPRS E-UTRAN Cell in packet
Full Name
tranfer mode
Abbreviation
QsearchP_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
Qsearch_P_E-UTRAN
3GPP Reference
45.008
This parameter specifies the measurement threshold for a UE to carry out
GPRS LTE cell reselection in packet transfer mode. If the parameter ranges
from 0 to 7, adjacent E-UTRAN cells are searched when the signal strength
of the UE is lower than the matching strength of this value. If the parameter
ranges from 8 to 15, adjacent E-UTRAN cells are searched when the signal
Description
strength of the UE is higher than the matching strength of this value.
Instance
Cell
0..15 (0=-98 dBm, 1=-94dBm, 2=-90dBm, 3=-86dBm, 4=-82dBm,
5=-78dBm,
6=-74dBm,
7=infinite (always),
8=-78dBm,
9=-74dBm,
10=-70dBm, 11=-66dBm, 12=-62dBm, 13=-58dBm, 14=-54dBm, and

15=infinite (never))
Unit
N/A
Default Value
Default Value

This parameter is configured according to the network requirements
in packet transfer mode. When the parameter ranges from 0 to 7, if it
is expected to measure the adjacent E-UTRAN cells when the signal
strength is lower than that in idle state, this parameter is set lower than
the parameter QsearchP_PS. When the parameter ranges from 7 to 15,

if it is expected to measure the adjacent E-UTRAN cells when the signal
strength is higher than that in idle state, this parameter is set higher than
the parameter QsearchP_PS.
Change Mode
Offline
2-1355
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.34 GPRS class of reported quantities of E-UTRAN adjacent

cells in packet tranfer mode
GPRS class of reported quantities of E-UTRAN adjacent cells in packet
Full Name
tranfer mode
Abbreviation
RepQuant_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
E-UTRAN_REP_QUANT
3GPP Reference
45.008
Description
cells in a measurement report in packet transfer mode (GPRS).
Instance
Cell
0..1 (0=RSRP, 1=RSRQ)
Unit
N/A
Default Value
This parameter specifies the class of the reported number of adjacent LTE
Default Value

Change Mode
Offline
Related features
N/A
2-1356
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.35 offset to the reported value when prioritising the TDD

E-UTRAN cells for PS in packet tranfer mode
offset to the reported value when prioritising the TDD E-UTRAN cells for PS
Full Name
in packet tranfer mode
Abbreviation
TDDRptOffset_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
E UTRAN_TDD_MEASUREMENT_REPORT_OFFSET
3GPP Reference
45.008
This parameter specifies the offset of the reported value when prioritizing
Description
the TDD E-UTRAN cells for the PS in packet transfer mode.
Instance
Cell
0..7 (For the RSRP, the mapping is as follows: 0=-140 dBm, 1=-139 dBm,
2=-138 dBm, , 62=-78 dBm, 63=-77 dBm. For the RSRQ, the mapping is
as follows: 0=-19.5 dB, 1=-19 dB, 2=-18.5 dB, , 29=-4 dB, 30=-3.5 dB.)
Unit
N/A
Default Value
Default Value
Change Mode

This parameter can be set greater than the parameter TDDRptOffset_PS
if the adjacent TDD E_UTRAN cells are expected to be prioritized for the
PS in packet transfer mode over in packet idle mode.
Offline
2-1357
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.36 GPRS TDD Measurement report threshold of RSRQ or

RSRP in packet tranfer mode
GPRS TDD Measurement report threshold of RSRQ or RSRP in packet
Full Name
tranfer mode
Abbreviation
TDDRptThresh2_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
45.008
Description
old of the RSRQ or RSRP (RepQuant unspecified) in packet transfer mode.
Instance
Cell
0..63
Unit
N/A
Default Value
This parameter specifies the GPRS TDD 6-bit measurement report thresh-
Default Value

Change Mode
Offline
Related features
N/A
2-1358
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.28.37 GPRS TDD Measurement report threshold of RSRP or

RSRQ in packet tranfer mode
GPRS TDD Measurement report threshold of RSRP or RSRQ in packet
Full Name
tranfer mode
Abbreviation
TDDRptThresh_PS_T
Managed Object
E-UTRAN Measurement
3GPP Name
3GPP Reference
45.008
This parameter specifies the GPRS TDD 6-bit measurement report thresh-
Description
old of the RSRP or RSRQ (RepQuant specified) in packet transfer mode.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1359
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29 UTRAN Handover Control

(GUtranHandoverControl)
2.29.1 UTRAN Handover Control ID
Full Name
UTRAN Handover Control ID
Abbreviation
GUtranHandoverControl
Managed Object
UTRAN Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
UTRAN Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1360
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->UTRAN Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.2 Inter system handover supported

Full Name
Inter system handover supported
Abbreviation
interSysHoCtrl
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether intersystem handover within BSC is allowed. The parameters determines whether BSC can issue handover to
Description
3G system.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
There is a demand of the site will be required to open

For a BSC, open the InterSysHoCtrl (intersystem)
switch in BSC to support the 2/3G intersystem handover in CS domain.
Usually this parameter adopts the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1361
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.3 Punishment period of UTRAN cell when handover failure

Full Name
Punishment period of UTRAN cell when handover failure
Abbreviation
hoFailPenalTm3g
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
dover after a handover failure.
Instance
Cell
1..255
Unit
N/A
Default Value
This parameter defines a protection period to prevent an immediate han-
This parameter defines a protection period

Default Value
to prevent an immediate handover after a handover failure. The
steadiness
of MS call should also be considered.
There will be a period of penalty time to prevent handover action on
a user.
If this parameter is set too low, there will not be enough penalty time and
handover failures are easy to happen again.

If this parameter is set too high, the penalty time will be too long and call
drops are easy to happen again.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1362
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.4 Slippery window size for calculating Ec/No or RSCP average

value to be zero
Slippery window size for calculating Ec/No or RSCP average value to be
Full Name
zero
Abbreviation
hoWindow3g
Managed Object
3GPP Name
Hreqave
3GPP Reference
N/A
In GSM system, BSC uses the power level measurement data to
manage and control handover decisions. BSC uses average values
instead of original values of measurement data for handover decisions.
It helps prevent negative impact on network performance caused by
abrupt changes in measurement data. Average on measurement value
in UTRAN adjacent cell also shall be required.
HoWindowUTRAN of Ec/No or RSCP average is the window size to
calculate Ec/No or RSCP average in adjacent UTRAN cell, that is,
Description
sample count used through average calculation.
Instance
Cell
1..31
Unit
N/A
Default Value
2-1363
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value
as early as possible to avoid call drop when the signal is poor during
communication.


delays.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.5 Number that measurement value allowed to be zero

Full Name
Number that measurement value allowed to be zero
Abbreviation
zeroAllowed3g
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1364
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Occasional 0 is acceptable.Excessive occurrences
of 0 indicate that the signals of this adjacent cell are too poor.
If the number of 0s allowed is adjusted as too small, the adjacent cell
with good signal maybe missed.
If the number of 0s allowed is adjusted as too large, handover to the
adjacent cell with poor signal maybe initiated.

It is recommended to set the value as small as possible, in order to
select the adjacent cell with good signal.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1365
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.6 Handover from GSM to UTRAN FDD RSCP Threshold

Full Name
Handover from GSM to UTRAN FDD RSCP Threshold
Abbreviation
hoRscpThsFdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
If there are at least HoRSCP_N_FDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_FDD of
HoRSCP_N_FDD latest RSCP average values is not lower than the sum
of HoRSCPThsFDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered. This adjacent cell is the candidate tar-
Description
get cell for the PS handover.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value

This parameter indicates the minimum threshold
for the handover to FDD network. Set the parameter according to 2/3G
interworking. If 3G network takes priority, this parameter should

be set low as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1366
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.7 Handover from GSM to UTRAN FDD RSCP Value P

Full Name
Handover from GSM to UTRAN FDD RSCP Value P
Abbreviation
hoRscp_P_Fdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not
lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description
the PS handover from GSM to UTRAN can be triggered.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1367
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.8 Handover from GSM to UTRAN FDD RSCP Value N

Full Name
Handover from GSM to UTRAN FDD RSCP Value N
Abbreviation
hoRscp_N_Fdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not
lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description
the PS handover from GSM to UTRAN can be triggered.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
2-1368
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
Update
2.29.9 Handover from GSM to UTRAN FDD Ec/No Threshold

Full Name
Handover from GSM to UTRAN FDD Ec/No Threshold
Abbreviation
hoEcNoThsFdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
BSC reserves at least HoEcNo_N_FDD RSCP average values for a
UTRAN adjacent cell. When at least HoEcNo_P_FDD out of the latest
HoEcNo_N_FDD average values are larger than or equal to the sume
of HoEcNoThsFDD and HoEcNoOffsetUTRAN, handover from GSM
to UTRAN takes place and the adjacent cell is taken as candidate
Description
destination cell for handover.
Instance
Cell
0..49
Unit
N/A
Default Value
25
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1369
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.29.10 Handover from GSM to UTRAN FDD Ec/No Value P

Full Name
Handover from GSM to UTRAN FDD Ec/No Value P
Abbreviation
hoEcNo_P_Fdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
When at least HoEcNo_P_FDD out of HoEcNo_N_FDD average values
are larger than or equal to the sum of HoEcNoThsFDD and HoEcNoOff-
Description
setUTRAN, handover from GSM to UTRAN takes place.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2-1370
SJ-20130408140048-016|2013-07-17(R1.0)
2.29.11 Handover from GSM to UTRAN FDD Ec/No Value N

Full Name
Handover from GSM to UTRAN FDD Ec/No Value N
Abbreviation
hoEcNo_N_Fdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
When at least HoEcNo_P_FDD out of HoEcNo_N_FDD average values
are larger than or equal to the sum of HoEcNoThsFDD and HoEcNoOff-
Description
setUTRAN, handover from GSM to UTRAN takes place.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.12 Directed retry to UTRAN cell allowed

Full Name
Directed retry to UTRAN cell allowed
2-1371
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
interSysRdCtrl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines if allow directed retry to UTRAN cell. When
no service channel is allocated in this cell, a user can try to redirect to
adjacent cell under allowed case by corresponding function switch. If this
Description
parameter is configured as Yes, it can be redirected to 3G adjacent cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

If this cell has adjacent 3Gcells, this switch
can try to redirect to an adjacent 3G cell when no service channel
is allocated in this cell.
Change Mode
Offline
Related features
ZGB-03-01-002 Direct Retry
Related Parameters
OutDrEnable
Relationship
inter-system redirection can be conducted only when this parameter
If the OutDrEnable parameter is set Yes, the

is set Yes.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1372
SJ-20130408140048-016|2013-07-17(R1.0)
2.29.13 FDD/TDD handover

Full Name
FDD/TDD handover
Abbreviation
fddTddPrio
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the priority control of FDD/TDD handover.
When FDD adjacent cells and TDD adjacent cells exist together, to
control the selection sequence of a target cell, FDDTDDPrio parameter
Description
to show whether to prefer to FDD cell handover or to TDD cell handover.
Instance
Cell
0: Priority to FDD
1: Priority to TDD
Unit
N/A
Default Value
Default Value

Adjust the parameter according to the actual
situations on site. If the adjacent cell is FDD, handover FDD is preferred;
if the adjacent cell is TDD, handover to TDD is preferred.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1373
SJ-20130408140048-016|2013-07-17(R1.0)
2.29.14 UTRAN handover

Full Name
UTRAN handover
Abbreviation
serviceHo
Managed Object
3GPP Name
Service Handover
3GPP Reference
3GPP TS 48.008
This parameter describes UTRAN handover priority control. MSC sends
the Service Handover parameter to BSC through the ASSIGNMENT
REQUEST and HANDOVER REQUEST messages.
Service Handover parameter has three values, including prefer to
UTRAN handover, not prefer to UTRAN handover, disallow to UTRAN
handover, taking actions on handover decision on subsequent BSC.
ServiceHo can be configured as the Default Value used while MSC does
not deliver
the Service Handover parameter, or configured as BSC forcedly using
the mode set by ServiceHo, but not the Service Handover parameter
Description
delivered by MSC.
Instance
Cell
0:Handover to UTRAN first
1:Not Handover to UTRAN first
2:Not allow to Handover to UTRAN
3:According to MSC, default handover to UTRAN first
4:According to MSC, default not handover to UTRAN first
5:According to MSC, default not allowed to handover to UTRAN
Unit
N/A
Default Value
Default Value
The parameter is configured based on MSC strategy,
and can be adjusted as needed.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1374
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.15 Handover from GSM to UTRAN TDD RSCP Threshold

Full Name
Handover from GSM to UTRAN TDD RSCP Threshold
Abbreviation
hoRscpThsTdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
The parameter defines a threshold. If there are at least HoRSCP_N_TDD
RSCP average values are reserved for an adjacent UTRAN cell in
BSC and at least HoRSCP_P_TDD of HoRSCP_N_TDD latest RSCP
average values are not lower than the sum of HoRSCPThsTDD and
HoRSCPOffsetUTRAN, the PS handover from GSM to UTRAN can be
triggered.
Description
This adjacent cell is the candidate target cell for the PS handover.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value

This parameter indicates the minimum threshold

for the handover to FDD network. The parameter should be set

according
to 2/3G interworking strategy. If 3G network takes priority, this
parameter should be set low as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1375
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.16 Handover from GSM to UTRAN TDD RSCP Value N

Full Name
Handover from GSM to UTRAN TDD RSCP Value N
Abbreviation
hoRscp_N_Tdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
The parameter defines a threshold.
If there are at least HoRSCP_N_TDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD of
HoRSCP_N_TDD
latest RSCP average values are not lower than the sum of
HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1376
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.17 Handover from GSM to UTRAN TDD RSCP Value P

Full Name
Handover from GSM to UTRAN TDD RSCP Value P
Abbreviation
hoRscp_P_Tdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
The parameter defines a threshold.
If there are at least HoRSCP_N_TDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD of
HoRSCP_N_TDD
latest RSCP average values are not lower than the sum of
HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered.
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1377
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.18 RSCP threshold when handover from GSM to FDD for load
sharing
Full Name
RSCP threshold when handover from GSM to FDD for load sharing
Abbreviation
loadHoRscpThsFdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter is used to traffic handover. Firstly you shall configure a
traffic handover threshold and inter-system handover switch.
This parameter is used to handover decision in 3G cell after traffic is
overloaded. BSC reserves at least HoRSCP_N_FDD RSCP average
values for a UTRAN adjacent cell. When at least HoRSCP_P_FDD out
of the latest HoRSCP_N_FDD average values are larger than or equal
to the sum of LoadHoRSCPThsFDD and HoRSCPOffsetUTRAN, it can
be used as traffic handover from GSM to UTRAN.
Description
This parameter value shall be lower than HoRSCPThsFDD.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value
2-1378
SJ-20130408140048-016|2013-07-17(R1.0)
The value should not be higher than that of HoRSCPThsFDD. The

iBSC should timely inform adjacent BSS or BSS about its loads through
periodically sending the LOAD INDICATION message to the MSC, to
achieve handover based on loads.

Parameters ( including LoadInd, LoadValidTime, and LoadIndPrd)
related to the background are used to achieve load measurement and
report.
This parameter has never been used . It is recommended to reserve
the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
HoRSCPThsFDD
Relationship
This parameter should not be set higher than

HoRSCPThsFDD.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.19 Ec/No threshold when handover from GSM to 3G for load

sharing
Full Name
Ec/No threshold when handover from GSM to 3G for load sharing
Abbreviation
loadHoEcNoThsFdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-1379
SJ-20130408140048-016|2013-07-17(R1.0)

overloaded. BSC reserves at least HoEcNo_N_FDD RSCP average
values for a UTRAN adjacent cell. When at least HoEcNo_P_FDD out of
the latest HoEcNo_N_FDD average values are larger than or equal to
the sum of LoadHoEcNoThsFDD and HoEcNoOffsetUTRAN, it can be
used as traffic handover from GSM to UTRAN.
Description
This parameter value shall be lower than HoEcNoThsFDD.
Instance
Cell
0..49
Unit
N/A
Default Value
25
Default Value



Parameters ( including LoadInd, LoadValidTime, and LoadIndPrd)
related to the background are used to achieve load measurement and
report.
This parameter has never been used . It is recommended to reserve
the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
HoEcNoThsFDD
Relationship
This parameter should not be higher than HoEcNoThsFDD.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1380
SJ-20130408140048-016|2013-07-17(R1.0)
2.29.20 RSCP threshold when handover from GSM to TDD for load
sharing
Full Name
RSCP threshold when handover from GSM to TDD for load sharing
Abbreviation
loadHoRscpThsTdd
Managed Object
3GPP Name
None
3GPP Reference
N/A
overloaded. BSC reserves at least HoRSCP_N_TDD RSCP average
values for a UTRAN adjacent cell. When at least HoRSCP_P_TDD out
of the latest HoRSCP_N_TDD average values are larger than or equal
to the sum of LoadHoRSCPThsTDD and HoRSCPOffsetUTRAN, it can
be used as traffic handover from GSM to UTRAN.
Description
This parameter value shall be lower than HoRSCPThsFDD.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value

Parameters (including LoadInd, LoadValidTime, and LoadIndPrd) related

to the background are used to achieve load measurement and report.
This parameter has never been used. It is recommended to reserve
the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
HoRSCPThsTDD
Relationship
This parameter should not be set higher than HoRSCPThsTDD.
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1381
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.21 Penalty time of handover failure(PS)

Full Name
Penalty time of handover failure(PS)
Abbreviation
hoFailPenalTm3g_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the PS handover to a 3G target cell fails, the cell will be punished in a
period of time, during which no handover will be conducted to this cell.
Description
This parameter determines the penalty duration.
Instance
1..100
Unit
Default Value
Default Value
configure by normal wireless environment
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1382
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.22 Window of calculating 3G cell(PS)

Full Name
Window of calculating 3G cell(PS)
Abbreviation
hoWindow3g_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The BSC makes a PS handover decision based on measurement data.
To reduce negative influence caused by sudden value variations due
to complicated radio transmission, the BSC uses a series of average
values calculated based on measurement data instead of raw data.
This parameter specifies the window size (HoWindow3G_PS) for
calculating average values of Ec/No or RSCP in UTRAN neighbor cells.
Description
It indicates the number of samples required for average calculation.
Instance
1..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1383
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.23 Support PS handover of Inter-System(PS)

Full Name
Support PS handover of Inter-System(PS)
Abbreviation
interSysHoCtrl_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether intersystem handover within BSC is allowed. This parameters determines whether BSC can issue handover to
Description
3G system.
Instance
0..1
Unit
N/A
Default Value
Default Value
It's not basic function and decided on demand.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1384
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.24 Number of zero in measure result(PS)

Full Name
Number of zero in measure result(PS)
Abbreviation
zeroAllowed3G_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
2-1385
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.25 Priority to FDD or TDD(PS)

Full Name
Priority to FDD or TDD(PS)
Abbreviation
fddTddPrio_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the handover priority to FDD cells or TDD cells.
When both FDD and TDD neighbor cells are available, this parameter
(FDDTDDPrio_PS) is used to determine the target cell selection sequence during PS handover: handover to an FDD cell first or handover
Description
to a TDD cell first.
Instance

0: Priority to FDD
1: Priority to TDD
Unit
N/A
Default Value
Default Value
consider the supporting capability of mobile phone
Change Mode
Offline
2-1386
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.26 RSCP threshold to FDD in load handover(PS)

Full Name
RSCP threshold to FDD in load handover(PS)
Abbreviation
loadHoRscpThsFdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used for traffic PS handover. First, a traffic handover
threshold and inter-system handover switch should be configured.
This parameter is used for decision of PS handover to a 3G cell when
traffic is overloaded. When the BSC reserves the average values of
at least HoRSCP_N_FDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoRSCP_N_FDD_PS RSTPs have at
least HoRSCP_P_FDD_PS values greater than or equal to the sum of
LoadHoRSCPThsFDD_PS and HoRSCPOffset3G_PS, it can trigger
traffic PS handover from GSM to UTRAN. The value should be lower
Description
than HoRSCPThsFDD_PS.
Instance
0..63
Unit
N/A
Default Value
35
Default Value

2-1387
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.27 Ec/No threshold to FDD in load handover(PS)

Full Name
Ec/No threshold to FDD in load handover(PS)
Abbreviation
loadHoEcNoThsFdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
at least HoEcNo_N_FDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoEcNo_N_FDD_PS RSTPs have at least
HoEcNo_P_FDD_PS values greater than or equal to the sum of LoadHoEcNoThsFDD_PS and HoRSCPOffset3G_PS, it can trigger traffic
PS handover from GSM to UTRAN. The value should be lower than
Description
HoEcNoThsFDD_PS.
Instance
0..49
Unit
N/A
2-1388
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
25
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.28 RSCP threshold to TDD in load handover(PS)

Full Name
RSCP threshold to TDD in load handover(PS)
Abbreviation
loadHoRscpThsTdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
at least HoRSCP_N_TDD_PS RSCPs for a neighbor UTRAN cell, the
average values of the latest HoRSCP_N_TDD_PS RSTPs have at
least HoRSCP_P_TDD_PS values greater than or equal to the sum of
LoadHoRSCPThsTDD_PS and HoRSCPOffset3G_PS, it can trigger
traffic PS handover from GSM to UTRAN. The value should be lower
Description
than HoRSCPThsFDD_PS.
2-1389
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
0..63
Unit
N/A
Default Value
35
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.29 RSCP threshold to FDD(PS)

Full Name
RSCP threshold to FDD(PS)
Abbreviation
hoRscpThsFdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1390
SJ-20130408140048-016|2013-07-17(R1.0)
There are at least HoRSCP_N_FDD_PS RSCP average values are

reserved for an adjacent UTRAN cell in BSC.
At least HoRSCP_P_FDD_PS of HoRSCP_N_FDD latest RSCP
average values is not lower than the sum of HoRSCPThsFDD_PS and
HoRSCPOffset3G_PS,
the PS handover from GSM to UTRAN can be triggered. This adjacent
Description
cell is the candidate target cell for the PS handover.
Instance
0..63
Unit
N/A
Default Value
35
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.30 P of handovering to FDD by RSCP(PS)

Full Name
P of handovering to FDD by RSCP(PS)
Abbreviation
hoRscp_P_Fdd_Ps
Managed Object
3GPP Name
N/A
2-1391
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
HoRSCP_P_FDD_PS of HoRSCP_N_FDD_PS RSCP average values
is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOff-
Description
set3G_P, the PS handover from GSM to UTRAN can be triggered.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
HoEcNo_N_FDD_PS
Relationship
The HoRSCP_P_FDD_PS cannot be higher than HoRSCP_N_FDD_PS.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.31 N of handovering to FDD by RSCP(PS)

Full Name
N of handovering to FDD by RSCP(PS)
Abbreviation
hoRscp_N_Fdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1392
SJ-20130408140048-016|2013-07-17(R1.0)
HoRSCP_P_FDD_PS of HoRSCP_N_FDD_PS RSCP average values

is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOffDescription
set3G_P, the PS handover from GSM to UTRAN can be triggered.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.32 EcNo threshold to FDD(PS)

Full Name
EcNo threshold to FDD(PS)
Abbreviation
hoEcNoThsFdd_Ps
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1393
SJ-20130408140048-016|2013-07-17(R1.0)
There are at least HoEcNo_N_FDD_PS Ec/No average values are

At least HoEcNo_P_FDD_PS of HoEcNo_N_FDD_PS latest Ec/No
average values is not lower than the sum of HoEcNoThsFDD_PS and
HoEcNoOffset3G_PS,
Description
Instance
0..49
Unit
N/A
Default Value
25
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.33 P of handovering to FDD by EcNo(PS)

Full Name
P of handovering to FDD by EcNo(PS)
Abbreviation
hoEcNo_P_Fdd_Ps
Managed Object
3GPP Name
N/A
2-1394
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter specifies the value of P that is used for PS handover
decision from GSM to UTRAN.
A PS handover from GMS to UTRAN is initiated when P
(HoEcNo_P_FDD_PS) of N (HoEcNo_N_FDD_PS) average Ec/No
values are equal to or greater than the sum of HoEcNoThsFDD_PS
Description
and HoEcNoOffset3G_PS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
HoEcNo_N_FDD_PS
Relationship
The HoEcNo_P_FDD_PS cannot be higher than HoEcNo_N_FDD_PS.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.34 N of handovering to FDD by EcNo(PS)

Full Name
N of handovering to FDD by EcNo(PS)
Abbreviation
hoEcNo_N_Fdd_Ps
Managed Object
3GPP Name
N/A
2-1395
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter specifies the value of N that is used for PS handover
decision from GSM to UTRAN.
A PS handover from GMS to UTRAN is initiated when P
(HoEcNo_P_FDD_PS) of N (HoEcNo_N_FDD_PS) average Ec/No
values are equal to or greater than the sum of HoEcNoThsFDD_PS
Description
and HoEcNoOffset3G_PS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.35 RSCP threshold to TDD(PS)

Full Name
RSCP threshold to TDD(PS)
Abbreviation
hoRSCPThsTdd_Ps
Managed Object
3GPP Name
N/A
2-1396
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
There are at least HoRSCP_N_TDD_PS RSCP average values are
At least HoRSCP_P_TDD_PS of HoRSCP_N_TDD_PS latest RSCP
average values is not lower than the sum of HoRSCPThsTDD_PS and
HoRSCPOffset3G_PS,
Description
Instance
0..63
Unit
N/A
Default Value
35
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.29.36 N of handovering to TDD by RSCP(PS)

Full Name
N of handovering to TDD by RSCP(PS)
Abbreviation
hoRSCP_N_Tdd_Ps
Managed Object
2-1397
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
HoRSCPOffset3G_PS,
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.37 P of handovering to TDD by RSCP

Full Name
P of handovering to TDD by RSCP
Abbreviation
hoRSCP_P_Tdd_Ps
2-1398
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
HoRSCPOffset3G_PS,
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
HoRSCP_N_TDD_PS
Relationship
The value of HoRSCP_P_TDD_PS cannot be higher than the value

of HoRSCP_N_TDD_PS.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2.29.38 2110~2170M frequency band permitted

Full Name
2110~2170M frequency band permitted

2-1399
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
FDDTrafficHoFreqCtl_0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the system is prior to switch the traffic
Description
to the UTRAN FDD 2110-2170M frequency band during traffic handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
It is required to configure the FDD frequency
bands allowed during traffic handover.

Select the FDD frequency band for absorbing

traffic as the target cell during traffic handover according to the
network condition.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
Managed Object

2-1400
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value


network condition.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1401
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value


network condition.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.29.41 Other Frequency band permitted(FDD)

Full Name
Other Frequency band permitted(FDD)
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
to another UTRAN FDD frequency band during traffic handover.

2-1402
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

network condition.
When the frequency band is not specified by FDDTrafficHoFreqCtl_0,

FDDTrafficHoFreqCtl_1, and FDDTrafficHoFreqCtl_2, select
FDDTrafficHoFreqCtl_7 (that is, other frequency band).
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
TDDTrafficHoFreqCtl_0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1403
SJ-20130408140048-016|2013-07-17(R1.0)
Description
to the 2010-2025M frequency band during traffic handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
It is required to configure the TDD frequency

Select the TDD frequency band for absorbing

network condition.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
to the 1880-1900M frequency band during traffic handover.

2-1404
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value


network condition.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.29.44 Other Frequency band permitted(TDD)

Full Name
Other Frequency band permitted(TDD)
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
to another frequency band during traffic handover.
Instance
Cell
2-1405
SJ-20130408140048-016|2013-07-17(R1.0)
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value

network condition.
When the frequency band is not specified by FDDTrafficHoFreqCtl_0,

FDDTrafficHoFreqCtl_1, select FDDTrafficHoFreqCtl_2 (that is, other
frequency band).
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.30 Site (GBtsSiteManager)

2.30.1 Site ID
Full Name
Site ID
Abbreviation
GBtsSiteManager
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
2-1406
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Site ID
Instance
None
1..65534
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
GUI: Managed Element->GSM Logical Configuration->Site Information

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.2 GBtsEquipment DN
Full Name
GBtsEquipment DN
Abbreviation
refGBtsEquipment
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
GBtsEquipment DN
Instance
Site
None
Unit
N/A
2-1407
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
NA
Default Value
The physical site must be configured.

Configure this parameter based on the site planning.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.3 Config Paging Repeat Support

Full Name
Config Paging Repeat Support
Abbreviation
CfgPagingRepSupport
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
Config Paging Repeat Support
Instance
Site
0..1
Unit
N/A
Default Value
Default Value
Set the parameter based on the base station version.
2-1408
SJ-20130408140048-016|2013-07-17(R1.0)

Configure this parameter based on the base station version.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.4 Inter SubCell handover permitted

Full Name
Inter SubCell handover permitted
Abbreviation
SubCellHO
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates which inter-subcell handover mode is
supported. Three handover modes are optional. Mode 1: If the MS is
in subcell 2 of the source cell before the handover, it is handed over to
subcell 2 of the target cell in preference. If the MS is in subcell 1 of the
source cell before the handover, it can only be handed over to subcell
1 of the target cell.
Mode 2: No matter which subcell the MS is camped on before the
handover, it can only be handed over to subcell 1 of the target cell.
Mode 3:
Whether the MS can be directly handed over to subcell 2 depends on
the level measurement of the target cell. If the path loss of the
target cell is less than PathLossMin configured for the target cell, the MS
is handed over to subcell 2 in preference. Or else, the MS
Description
can only be handed over to subcell 1 of the target cell.

2-1409
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
SITE
0: not allowed
1: allowed
2: According to radio measurement
Unit
N/A
Default Value
Default Value
In most cases, subcells of the same site have

almost the same coverage radius. The MS can be directly handed over
between these subcells.
Set the parameter value to "Yes" when the subcells of the site have
similar coverage radius to allow the handover from subcell 2 of the
source cell to subcell 2 of the target cell. If the coverage radius of
the target subcell 2 is greatly different from that of the source subcell
2, especially in the case of SDR multi-antenna transmission, set the

parameter to "Depend on radio measurement". When the coverage

radius of the cell is large, the handover condition must fulfill the criteria
of TA. In this case, the radio measurement mode is improper because
TA of the target cell cannot be measured during inter-cell handover.
Set the parameter to "No" to limit the handover to subcell 1 of the target
cell if the previous two modes are inappropriate, or these two modes
cause poor performance such as low handover success rate and high
call drop rate.
Change Mode
Offline
Related features
ZGO-05-02-009 Concentric Circle Technology
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1410
SJ-20130408140048-016|2013-07-17(R1.0)
2.30.5 Support new abis ps message

Full Name
Support new abis ps message
Abbreviation
SupNewAbisPsMsg
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether a new Abis PS message type is support.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Set this parameter based on whether the site supports the PS Abis new
message format. For the sites supporting this format, enable the switch.
Otherwise, disable the function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.6 The Abis band limit of HR priority

Full Name
The Abis band limit of HR priority
Abbreviation
bwrestorelimit
2-1411
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
When the bandwidth usage in IP transmission exceeds this threshold, the
Description
system prefers the HR mode for the access of voice subscribers.
Instance
SITE
0..100
Unit
Default Value
70
Default Value
HR is assigned when IP transmission occupies much bandwidth.
This parameter value can be reduced appropriately during IP
transmission congestion.
Change Mode
Offline
Related features
N/A
Related Parameters
frtohrbwlimit
Relationship
frtohrbwlimit >= bwrestorelimit
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.7 The Abis band of HO from FR to HR

Full Name
The Abis band of HO from FR to HR
Abbreviation
frtohrbwlimit
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
2-1412
SJ-20130408140048-016|2013-07-17(R1.0)
When the bandwidth usage in IP transmission exceeds this threshold, the

Description
system hands over some subscribers from FR channels to HR channels.
Instance
SITE
0..100
Unit
Default Value
90
Default Value
Existing FR changes to HR when IP transmission bandwidth is
congested.
This parameter value can be reduced appropriately during IP
transmission congestion.
Change Mode
Offline
Related features
N/A
Related Parameters
bwrestorelimit
Relationship
frtohrbwlimit >= bwrestorelimit
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.8 Minimal number of idle E1 Abis Timeslot

Full Name
Minimal number of idle E1 Abis Timeslot
Abbreviation
MinAccessAbisThsE1
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the minimum number of idle timeslots used for
access in the E1 Abis transmission mode. No more channels can be activated when the number of remaining timeslots is less than this threshold.
Description
This parameter can be referred for 3G pre-admission.

2-1413
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..64
Unit
N/A
Default Value
Default Value
Set this parameter based on the maximum bandwidth used by the
minimal subscriber to ensure that one subscriber can use the bandwidth.

A larger value indicates greater difficulty for subscribers to access. If

more subscribers are expected to access, set this parameter to a lower
value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.9 Minimal of usable IP Abis bandwidth

Full Name
Minimal of usable IP Abis bandwidth
Abbreviation
MinAccessAbisThsIP
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the minimum bandwidth used for access in the
IP Abis transmission mode. No more channels can be activated when the
remaining bandwidth is less than this threshold. This parameter can be
Description
referred for 3G pre-admission.
Instance
Cell
2-1414
SJ-20130408140048-016|2013-07-17(R1.0)
0..4294967295
Unit
kbps
Default Value
64
Default Value
Set this parameter based on the maximum bandwidth used by the
minimal subscriber to ensure that one subscriber can use the bandwidth.

A larger value indicates greater difficulty for subscribers to access. If

more subscribers are expected to access, set this parameter to a lower
value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.10 the master power control option for Base Transceiver

Station
Full Name
the master power control option for Base Transceiver Station
Abbreviation
BtsMasterPwCtrlOp
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
the master power control option for Base Transceiver Station
Instance
Site
1: Support
0: Not Support
2-1415
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

Functional switch. It is disabled by default.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.11 the delay time of master power Off

Full Name
the delay time of master power Off
Abbreviation
MasterPwrOffTime
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
the delay time of master power Off
Instance
Site
5..480
Unit
Min
Default Value
Default Value
Set it to the time for waiting for the base station to start.
2-1416
SJ-20130408140048-016|2013-07-17(R1.0)

Use the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.12 the delay time of Transceivers Off

Full Name
the delay time of Transceivers Off
Abbreviation
TrxOffTime
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
the delay time of Transceivers Off
Instance
Site
0..640
Unit
Min
Default Value
Default Value
Start immediately.

Use the default value.
Change Mode
Offline
Related features
N/A
2-1417
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.13 the Percent for Transceivers Off

Full Name
the Percent for Transceivers Off
Abbreviation
TrxOffPercent
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
the Percent for Transceivers Off
Instance
Site
0..100
Unit
Default Value
30
Default Value
Disable some TRXs to relieve congestion.
Configure this parameter based on the base station's auxiliary power
configuration. A greater value indicates that more TRXs are disabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-1418
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.14 the GNode id for master power control

Full Name
the GNode id for master power control
Abbreviation
MasterPwCtrlGNode
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
Description
the GNode id for master power control
Instance
Site
1..12
Unit
N/A
Default Value
Default Value
Set this parameter based on the base station configuration.

Configure this parameter based on the site configuration.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
2-1419
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.30.15 Benchmark Site

Full Name
Benchmark Site
Abbreviation
BenchmarkSite
Managed Object
Site
3GPP Name
N/A
3GPP Reference
N/A
This parameter sets the benchmark site for clock synchronization when
Description
the Um interface soft synchronization function is used.
Instance
Site
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Set the parameter as required.
It is not set by default.
Set this parameter as required. Normally the benchmark site is the site
that provides the GPS clock source.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site
Parameter Modifying
Version
N/A
2-1420
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.31 Site baseband share Configuration

(GSiteBaseBandShare)
2.31.1 Site baseband share Configuration ID
Full Name
Site baseband share Configuration ID
Abbreviation
GSiteBaseBandShare
Managed Object
Site baseband share Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Site baseband share Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Site baseband share Configuration
Parameter Modifying
Version
N/A
2-1421
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.31.2 Baseband resource share support

Full Name
Abbreviation
BaseBandShare
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Site
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
If the traffic distributes in tide mode, this
function can be enabled according to operator requirements.
Change Mode
Offline
Related features
Related Parameters
BaseBandShare
Relationship
This switch is a BSC-level and site-level switch.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1422
SJ-20130408140048-016|2013-07-17(R1.0)
2.31.3 Traffic threshold for allocate baseband

Full Name
Traffic threshold for allocate baseband
Abbreviation
bbRequestTraThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a traffic threshold for baseband resource allocation. The BSC selects specific TRXs to allocate baseband resources
when detecting in a measurement report that the traffic in a cell is greater
Description
than this threshold.
Instance
Site
0..100
Unit
Default Value
70
Default Value
When the cell traffic is relatively high, the carrier can be selected to
allocate baseband resources.

If this parameter is too large, the cell is even more congestioned when

baseband resources are allocated for carriers only after the cell is
congestioned.
If this parameter is too small, too many baseband resources are
occupied when cells are idle.
Change Mode
Offline
Related features
Related Parameters
bbReleaseTraThs
Relationship
BBURequestTRAThs>BBUReleaseTRAThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1423
SJ-20130408140048-016|2013-07-17(R1.0)
2.31.4 Traffic threshold for release baseband

Full Name
Traffic threshold for release baseband
Abbreviation
bbReleaseTraThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a traffic threshold for baseband resource release. The BSC selects specific TRXs to release baseband resources
when detecting in a measurement report that the traffic in a cell is less
Description
than this threshold
Instance
Site
0..100
Unit
Default Value
Default Value

If the default value is set to 0, baseband resources are not released

though the cell is idle. The default value is to ensure that the baseband
resources are being applied.
If this parameter is too large, baseband resources are released though
the cell is very busy. If this parameter is too small, the baseband
resources are not released though the cell is very idle.
Change Mode
Offline
Related features
Related Parameters
bbRequestTraThs
Relationship
BBURequestTRAThs>BBUReleaseTRAThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1424
SJ-20130408140048-016|2013-07-17(R1.0)
2.31.5 Channel busy threshold for urgent allocate baseband

Full Name
Channel busy threshold for urgent allocate baseband
Abbreviation
bbOverThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a channel busy threshold for urgent allocation
of baseband resources. When the radio channel busy ratio of a cell is
greater than this threshold due to sudden traffic increase, specific TRXs
Description
are selected to allocate more baseband resources.
Instance
Site
0..100
Unit
Default Value
80
Default Value
When the cell channel occupation in real time is high, immediately select
the carrier to allocate baseband resources.

If this parameter is too large, the cell is even more congestioned when

baseband resources are allocated for carriers only after the cell is
congestioned.
If this parameter is too small, too many baseband resources are
occupied when cells are idle.
Change Mode
Offline
Related features
Related Parameters
bbLowerThs
Relationship
BBUOVERThs>BBULOWERThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1425
SJ-20130408140048-016|2013-07-17(R1.0)
2.31.6 Channel busy threshold for urgent release baseband

Full Name
Channel busy threshold for urgent release baseband
Abbreviation
bbLowerThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a channel busy threshold for urgent release of
baseband resources. When a cell fails to request baseband resources,
the BSC searches for cells whose radio channel busy ratios are less than
this threshold, and then selects a TRX to release some baseband re-
Description
sources after locating such cells.
Instance
Site
0..100
Unit
Default Value
60
Default Value
The cell does not release baseband resources when it is busy.

If this parameter is too large, more cells can be selected to release
baseband resources.If this parameter is too small, less cells can be
selected to release baseband resources.
Change Mode
Offline
Related features
Related Parameters
bbOverThs
Relationship
BBUOVERThs>BBULOWERThs
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1426
SJ-20130408140048-016|2013-07-17(R1.0)
2.32 Bvc (GBvc)

2.32.1 Bvc ID
Full Name
Bvc ID
Abbreviation
GBvc
Managed Object
Bvc
3GPP Name
N/A
3GPP Reference
N/A
Description
Bvc ID
Instance
None
1..8
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Bvc
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.32.2 BvcI
Full Name
BvcI
2-1427
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
BVCI
Managed Object
Bvc
3GPP Name
BVCI
3GPP Reference
3GPP TS 48.019
BSSGP Virtual Connection (BVC) provides an approach for
communication between different BSSGP entities. The peer-to-peer
Point-to-Point (PTP) or Point-to-Multipoint (PTM) or inter-signaling entity
transmission of BSSGP PDUs lies on BVC.
Each virtual connection has one identifier, that is, BVCI. It enables the
network service layer at the bottom layer to route BSSGP PDUs to the
peer entity very effectively. One NSE carries only one signaling BVC
Description
(BVCI=0).
Instance
Cell
2..65535
Unit
N/A
Default Value
NA
Default Value
Configuration based on actual

Under one NSE, each GPRS cell can be uniquely
identified by the BVCI. One NSE carries only one signaling BVC

(BVCI=0).
The value should not be adjusted and is dependent upon the actual
cell configuration. This parameter must be unique under one SGSN.If
the configuration of this parameter is incorrect, the PS services
of the cell may be unavailable.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Bvc
Parameter Modifying
Version
N/A
2-1428
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.32.3 FR NSE DN
Full Name
FR NSE DN
Abbreviation
refGFrGbNse
Managed Object
Bvc
3GPP Name
N/A
3GPP Reference
N/A
Description
The DN of FR NS, to find the corresponding NSEI.
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
A planned interconnection parameter.

Planned interconnection parameter.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Bvc
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1429
SJ-20130408140048-016|2013-07-17(R1.0)
2.32.4 IP NSE DN
Full Name
IP NSE DN
Abbreviation
refGIpGbNse
Managed Object
Bvc
3GPP Name
N/A
3GPP Reference
N/A
Description
The DN of IP NSE,to find the corresponding NSEI.
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
A planned interconnection parameter.

Planned interconnection parameter.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Bvc
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33 GPRS Configuration (GCellPs)

2.33.1 GPRS Configuration ID
Full Name
GPRS Configuration ID
2-1430
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
GCellPs
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
GPRS Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.2 T3168
Full Name
T3168
Abbreviation
t3168
Managed Object
GPRS Configuration
3GPP Name
T3168
3GPP Reference
3GPP TS 44.060
2-1431
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used on the MS side. It belongs to GPRS Cell Options

IE parameters. It is broadcast to MSs in the SI13 message over BCCH
and the PSI13 message over PACCH. It defines when to stop waiting
for a PACKET UPLINK ASSIGNMENT message after an MS sends a
PACKET RESOURCE REQUEST message, a PACKET DOWNLINK
ACK/NACK message carrying Channel Request Description IE, or a
PACKET CONTROL ACKNOWLEDGEMENT message requesting new
TBF.
Timer Started: At sending the PACKET RESOURCE REQUEST
message, the PACKET DOWNLINK ACK/NACK message carrying
Channel Request Description IE, or the PACKET CONTROL
ACKNOWLEDGEMENT message requesting new TBF.
Timer Stopped: On receipt of a PACKET UPLINK ASSIGNMENT, or
a PACKET TIMESLOT RECONFIGURE message that assigns uplink
TBF. On receipt of a PACKET ACCESS REJECT message that rejects
uplink TBFs.
Action at expiry: Reinitiate the packet access procedure or retransmit the
Description
PACKET RESOURCE REQUEST or PACKET DOWNLINK ACK/NACK.
Instance
Cell
0:0.5
1:1
2:1.5
3:2
4:2.5
5:3
6:3.5
7:4
Unit
Default Value
Default Value
The parameter is set in accordance with general radio environment.

The value influences the uplink TBF establishment time and uplink TBF
establishment successful rate. The smaller the value is, the shorter the
time of waiting for packet uplink assignment.
The lower the uplink TBF establishment successful rate is, the shorter is
the average delay of packet access. The poorer the radio environment
is, the lower the TBF establishment successful rate is. If the value is set
as too small, the request for packet access is more likely to occur, and
the probability of the network performing reassignment increases, which
lead to a waste of system resources. The larger the value is, the longer
the is time of waiting for packet uplink assignment.
The lower the uplink TBF establishment successful rate is, the longer is
the average delay of packet access. The poorer the radio environment
2-1432
SJ-20130408140048-016|2013-07-17(R1.0)
is, the higher the TBF establishment successful rate is. You can set
the value in accordance with the network delay requirement and radio
quality.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.3 T3192
Full Name
T3192
Abbreviation
t3192
Managed Object
GPRS Configuration
3GPP Name
T3192
3GPP Reference
3GPP TS 44.060
This parameter is used on the MS side. It belongs to GPRS Cell
Options IE parameters. It is broadcast to MSs in the SI13 message over
BCCH and the PSI13 message over PACCH. During packet downlink
transmission, timer T3192 is triggered when the MS receives all the
RLC data blocks. When timer T3192 expires, the MS shall release the
resources associated with the TBF (e.g. TFI) and begin to monitor its
paging channel.
Timer Started:
At sending the PACKET DOWNLINK ACK/NACK with the Final Ack
Indicator=1, or at sending the PACKET CONTROL ACK as a response
to final RLC data block in unacknowledged mode.
Description
Timer Restarted:
2-1433
SJ-20130408140048-016|2013-07-17(R1.0)
Restarted at sending the PACKET DOWNLINK ACK/NACK with the

Final Ack Indicator=1, or at sending the PACKET CONTROL ACK as a
response to final RLC data block in unacknowledged mode.
Action at expiry:
If the MS is in packet transfer mode and there are no other ongoing
TBFs, it shall release the resources, stop monitoring the PDCHs, and
begin to monitor the paging channel.
Timer Stopped:
Stopped at the reception of a PACKET DOWNLINK ASSIGNMENT or
PACKET TIMESLOT RECONFIGURE message during the operation of
T3192.
Instance
Cell
0: 500
1: 1000
2: 1500
3: 0
4: 80
5: 120
6: 160
7: 200
Unit
ms
Default Value
Default Value
according to the general radio condition(normally is 500ms)

The larger the value is, the longer the duration of reserving TBF-related
resources (including TF and timeslots). Consequently, invalid resources
are occupied for a long time and congestion is likely to occur if there is
no downlink data transmission subsequently.
The smaller the value is, the faster the MS is to release TBF resources,
and the longer is the TBF establishment because the network must
initiate the paging or the immediate assignment process when new

downlink data occurs to the network. If T3192 is not timed out when the
new downlink data occurs to the network, the network can directly send
the PACKET DOWNLINK ASSIGNMENT message, to establish a new
downlink TBF and shorten the establishment time of TBF.
The value is set in the following two ways:
1. The value is set appropriately through evaluating the interval of
transmitting the downlink data for every two times.
2. The value is set as a large value to a great extent when the loads,
service models, and network resources in the cell are adequate, to
reduce TBF establishment time and improve data transmission rate.
2-1434
SJ-20130408140048-016|2013-07-17(R1.0)
The network side has a corresponding timer T3193 whose value should
be greater than that of T3192.
Change Mode
Offline
Related features
N/A
Related Parameters
t3193
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.4 T3193
Full Name
T3193
Abbreviation
t3193
Managed Object
GPRS Configuration
3GPP Name
T3193
3GPP Reference
3GPP TS 44.060
This parameter is timer T3193 which is used for protection on TBF
release during downlink packet transmission. For details, see the
description of T3191. The conditions of timer start, stop, and timeout
actions are as follows.
Time start/restart: If BSC receives PACKET DOWNLINK ACK/NACK
(RLC mode is ACK mode) or PACKET CONTROL ACKNOWLEDGE
(RLC mode is NACK mode) message with FAI domain = 1, T3191 stops
and T3193 starts.
Timer stop: new downlink TBF in the network uses the same TFI.
Timeout action: Release the TFI resource.
The parameter value should be greater than timer T3192, to ensure that
Description
MS releases the TFI prior to BSC.
Instance
BSC
2-1435
SJ-20130408140048-016|2013-07-17(R1.0)
0..65535
Unit
10ms
Default Value
51
Default Value
Depends on Protocol Recommended Value

When T3192/T3193 uses the delay policy, downlink resources are
wasted to some extent, but the network can directly send the PACKET
DOWNLINK ASSIGNMENT message to establish a new downlink
TBF within the time counted by T3192/T3193. In this case, TBF
establishment time is reduced.
If T3192/T3193 is timed out, the network side can only initiate the
paging or the immediate procedure (If the MS is in the ready state) to
establish TBF. In this case, downlink TBF establishment takes a long
period of rime.
Therefore, setting of the T3192/T3193 should take the service load
in the cell into full consideration. The value should be as large as
possible when network resources are adequate, to reduce new TBF
establishment time, improve data transmission rate, and effectively
improve the index related to downlink throughput.
T3193 is a parameter at the network side, so its value should be slightly
greater than that of T3192.
Change Mode
Offline
Related features
N/A
Related Parameters
t3192
Relationship
Timer T3193 of global resources must be longer

than timer T3192 of all cells.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1436
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.5 DRX mode holding timer

Full Name
DRX mode holding timer
Abbreviation
drxTimeMax
Managed Object
GPRS Configuration
3GPP Name
DRX_TIMER_MAX
3GPP Reference
3GPP TS 44.060
This parameter is used on the MS side. It belongs to GPRS Cell
Options IE parameters. It is broadcast to MSs in the SI13 message over
BCCH and the PSI13 message over PACCH. The DRX_TIMER_MAX
parameter controls the duration of non-DRX mode. There are two cases
when the MS shall enter a non-DRX mode period.
1) At the transition from the packet transfer mode to the packet idle
mode.
2) At the transition from the dual transfer mode (DTM mode) to the
dedicated mode or packet idle mode.
The non_DRX mode duration is determined by the lower value
between NON_DRX_TIMER and DRX_TIMER_MAX parameter. The
DRX_TIMER_MAX parameter is broadcast in the cell system message.
The NON_DRX_TIMER parameter is negotiated with the CN side during
Description
the GPRS ATTACH procedure.
Instance
Cell
0: 0(0)
1: 1(1)
2: 2(2)
3: 4(4)
4: 8(8)
5: 16(16)
6: 32(32)
7: 64(64)
Unit
Default Value
Default Value
BS_PA_MFRMS default value is 5, the paging cycle is 1.18s, the

parameter is more than paging cycle, TBF will be fast established in
this period time.
2-1437
SJ-20130408140048-016|2013-07-17(R1.0)
Under non-DRX mode, it takes about 40 ms to send the IMMEDIATE

ASSIGNMENT command on PCH/AGCH, which is muh faster than the
command is sent under DRX mode. TBF establishment time is less
under non-DRX mode than that under DRX mode. Under DRX mode,
the MS can only monitor the paging message on a paging group, then
receive the IMMEDIATE PAGING MESSAGE on all paging blocks and
AGCH reserved blocks. Receiving the paging message takes a long

period of time that is about half of the paging meulti-frame period. It is
235 ms when BS_PA_MFRMS is 2. The MS consumes more power
under non-DRX mode.
If this parameter value is set to a large value, TBF establishment time
is reduced but power consumption of the MS increases. If it is set to a
small value, power consumption of the MS is saved, system signalling
load increases because the paging procedure increases under DRX
mode, and data transmission delay increases.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.6 MAX blocks transmission in each TS

Full Name
MAX blocks transmission in each TS
Abbreviation
bsCvMax
Managed Object
GPRS Configuration
3GPP Name
BS_CV_MAX
3GPP Reference
3GPP TS 44.060
2-1438
SJ-20130408140048-016|2013-07-17(R1.0)

IE parameters. If no PBCCH is available, it is broadcast to MSs in
the SI13 message. BS_CV_MAX indicates the maximum value of
countdown value (start countdown value), which is used for calculating
the Countdown Value (VC).
The MS shall send the Countdown Value (CV) in each uplink RLC data
block to indicate the absolute sequence number BSN of the RLC data
blocks to be transmitted in the uplink TBF. The CV shall be calculated
as follows:
where:
TBC = total number of RLC data blocks currently to be transmitted
in the TBF.
BSN' = absolute block sequence number of the RLC data block, with
range from 0 to (TBC - 1).
NTS = number of timeslots assigned to the uplink TBF in the assignment
message, with range 1 to 8.
K = 2 when commanded MCS is MCS-7, MCS-8 or MCS-9, otherwise
K=1,
the function round() rounds upwards to the nearest integer.
The division operation is non-integer and results in zero only for (TBC
- BSN' - 1) = 0.
This parmeter is also used to determine the duration for MSs to use
timer T3200 in non-DRX mode:
T3200 = 4* the time defined by BS_CV_MAX
In addition, this parameter determines the N3104max value.
Description
N3104_MAX = 3 * (BS_CV_MAX + 3) * NTS
Instance
Cell
0..15
Unit
N/A
Default Value
15
Default Value
the parameter effect T3200 and N3104MAX for MS to tolerate abnormal,
so the highest value is better.

If the network does not enable the extended
uplink function or the MS does not support GERA package 1, the MS
does not support the extended uplink function. When the MS enters
the countdown process, all the new uplink LLC data should be sent
in one TBF, and the initial value of the countdown number should not
be too large in accordance with the network performance. In addition,

in the current network, some MSs do not support the maximum value
15. Therefore, this parameter value can be reduced appropriately.If
the network enables the extended uplink function and the MS supports
GERA package 1, it is recommended to set the value as maximum if no
2-1439
SJ-20130408140048-016|2013-07-17(R1.0)
negative influence occurs.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.7 Packet control acknowledgement type

Full Name
Packet control acknowledgement type
Abbreviation
ctrAckType
Managed Object
GPRS Configuration
3GPP Name
CONTROL_ACK_TYPE
3GPP Reference
3GPP TS 44.060
CONTROL_ACK_TYPE is a parameter broadcast in system information
13.
This field is the binary representation of the default format of the
PACKET CONTROL ACKNOWLEDGMENT message:
0 default format is four access bursts
Description
1 default format is RLC/MAC control block.
Instance
Cell
0: Four access bursts
1: RLC/MAC control block
Unit
N/A
Default Value
Default Value
generally apply RLC/MAC control block
2-1440
SJ-20130408140048-016|2013-07-17(R1.0)
These two methods do not influence the successful

rate of sending the PACKET CONTROL ACKNOWLEDGEMENT
message, so the
default value is used.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.8 Access burst type

Full Name
Access burst type
Abbreviation
accessType
Managed Object
GPRS Configuration
3GPP Name
ACCESS_BURST_TYPE
3GPP Reference
3GPP TS 44.060
The ACCESS_BURST_TYPE field indicates if the 8 or 11 bit format
shall be used in the PACKET CHANNEL REQUEST message, the
PTCCH uplink block (3GPP TS 44.004) and in the PACKET CONTROL
ACKNOWLEDGMENT message when the format is four access bursts.
The field is coded according to the following table:
0 8-bit format shall be used
Description
1 11-bit format shall be used
Instance
Cell
0: 8 bits
1: 11 bits
Unit
N/A
2-1441
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

11bits can minimize the C/I requirements for
uplink signalling transfer. This function should be enabled with caution
if you do not have much on-site operation experience.
Change Mode
Offline
Related features
ZGB-03-05-005 8/11 bit Access Burst
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.9 N3102 decrease step

Full Name
N3102 decrease step
Abbreviation
panDec
Managed Object
GPRS Configuration
3GPP Name
PAN_DEC
3GPP Reference
3GPP TS 44.060
parameters. It is broadcast to MSs in the SI13 message over BCCH and
the PSI13 message over PACCH, indicating the values of PAN_DEC,
PAN_INC, and PAN_MAX. Each time cell reselection is done for an MS,
the counter N3102 is reset to the PanMax value.
When the MS receives a PACKET UPLINK ACK/NACK message that
allows the advancement of V(S), the timer T3182 starts. When the
MS receives the PACKET UPLINK ACK/NACK message that makes
V(S) smaller than V(A) + W(S), T3182 stops. If T3182 expires, the MS
Description
decrements N3102 by the broadcast value PAN_DEC. When N3102 < 0

2-1442
SJ-20130408140048-016|2013-07-17(R1.0)
is reached, the MS performs an abnormal release with cell re-selection.

When the value of any of PAN_DEC, PAN_INC, and PAN_MAX is 0,
N3102 is invalid.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Default Value
to avoid TBF abnormal release and cell reselection, PanMax applies the
maximum value and PanDec applies the minimum value, PanInc applies
2 times of PanDec in refference to CS RLT.
add up the PAN_MAX and PAN_INC, cut down the PAN_DEC, the
posibility of abnormal release and cell reseletion owing to not receiving
PACKT UPLINK ACK will be cut down , but the window stall will keep
longer time and the resoure can not be used by other MS.On the
controry, TBF abnormal release and cell reseletion will happen more
frequently and normal release number will be cut down.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1443
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.10 N3102 increase step

Full Name
N3102 increase step
Abbreviation
panInc
Managed Object
GPRS Configuration
3GPP Name
PAN_INC
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. They belong to the GPRS cell
option parameters, and they are broadcast to the MS in the PSI1, PSI13
and SI13 messages, indicating the values of parameters of PAN_DEC,
PAN_INC and PAN_MAX. After each cell reselection, the MS will set
the initial value of N3102 as the PanMax value.
When the MS receives the PACKET UPLINK ACK/NACK message to
move V(S) forward, it adds PanInc to N3102 (but the maximum value
shall not exceed PanMax).
When the MS detects the stall condition (V(S) = V(A) + W(S)), T3182 will
start. When it receives the PACKET UPLINK ACK/NACK message
that enables V(S) < V(A) + W(S), T3182 stops. If T3182 expires, the MS
will subtract PanDec from N3102. When the condition satisfies N3102 <
0, the MS will take cell reselection as abnormal release.
Description
When one of PanDec, PanInc, and PanMax is zero, N3102 is invalid.
Instance
Cell
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Default Value
2-1444
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.11 N3102 max

Full Name
N3102 max
Abbreviation
panMax
Managed Object
GPRS Configuration
3GPP Name
PAN_MAX
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. They belong to the GPRS cell
option parameters, and they are broadcast to the MS in the PSI1, PSI13
and SI13 messages, indicating the values of parameters of PAN_DEC,
PAN_INC and PAN_MAX. After each cell reselection, the MS will set
the initial value of N3102 as the PanMax value.
When the MS receives the PACKET UPLINK ACK/NACK message to
move V(S) forward, it adds PanInc to N3102 (but the maximum value
shall not exceed PanMax).
When the MS detects the stall condition (V(S) = V(A) + W(S)), T3182 will
start. When it receives the PACKET UPLINK ACK/NACK message that
enables V(S) < V(A) + W(S), T3182 stops. If T3182 expires, the MS will
subtract PanDec from N3102. When the condition satisfies N3102 < 0,
the MS will take cell reselection as abnormal release.
Description
When one of PanDec, PanInc, and PanMax is zero, N3102 is invalid.
Instance
Cell
2-1445
SJ-20130408140048-016|2013-07-17(R1.0)
0: 4
1: 8
2: 12
3: 16
4: 20
5: 24
6: 28
7: 32
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.12 Route area color code

Full Name
Route area color code
Abbreviation
raColor
2-1446
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
GPRS Configuration
3GPP Name
RA COLOUR
3GPP Reference
3GPP TS 44.018
Parameter used at the MS side. It is broadcast to the MS in SI3, SI4,
SI7 and SI8. RaColor is similar to the BCC function in the GSM system.
In some cases, such as inter-BSC cell reselection, the GPRS network
assigns different RaColor values to adjacent cells with the same route
area code to ensure that MS can initiate the Routing Area Updating
process.
In this way, when MS receives different RaColor values in the cells with
the same routing area code, it initiates the Routing Area Updating
Description
process similar as when it spans two different routing areas.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Generally, RAC and LA are consistent with each
other. It is recommended to set the value as 0.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1447
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.13 Extended measurement report order

Full Name
Extended measurement report order
Abbreviation
meaOrder
Managed Object
GPRS Configuration
3GPP Name
MEASUREMENT_ORDER
3GPP Reference
3GPP TS 44.060
The MEASUREMENT ORDER field indicates if set = 0 that the mobile
station is in control of the cell re-selection in both packet idle mode and
packet transfer mode (= NC0 in 3GPP TS 45.008) and that the mobile
station shall not send any measurement reports to the network (= NC0
and = EM0 in 3GPP TS 45.008). It also indicates that the Optional PSI5
message is not broadcast.
If set = 1 the mobile station shall send measurement reports for cell
re-selection and/or for extended measurements to the network. Further
cell re-selection and measurement details are included in the PSI5
Description
message.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
This parameter is related to the configuration
of PBCCH channel, so it is recommended not to use the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1448
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.33.14 Network control order

Full Name
Network control order
Abbreviation
ctrlOrder
Managed Object
GPRS Configuration
3GPP Name
NETWORK_CONTROL_ORDER
3GPP Reference
3GPP TS 45.008
The network may request measurement reports from the MS and
control its cell re selection. This is indicated by the parameter
NETWORK_CONTROL_ORDER. The meaning of the different
parameter values is specified as follows:
NC0 Normal MS control
The MS shall perform autonomous cell re-selection.
NC1 MS control with measurement reports
The MS shall send measurement reports to the network as defined in
subclause 10.1.4.1.
The MS shall perform autonomous cell re-selection.
NC2 Network control
The MS shall send measurement reports to the network as defined in
subclause 10.1.4.1.
The MS shall only perform autonomous cell re-selection when the
reselection is triggered by a downlink signalling failure as defined in
subclause 6.5 or a random access failure as defined in 3GPP TS 44.018
and 3GPP TS 44.060 or if the cell is barred or the C1 criterion falls
below zero. The MS shall only determine whether the cell is barred
Description
once camped on the cell.
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
refer to the general application
Setting of the value is in accordance with
the network load, network plan and service requirements.
Change Mode
Offline
Related features

2-1449
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.15 CCCH SplitPGCycle support

Full Name
CCCH SplitPGCycle support
Abbreviation
spgcSuport
Managed Object
GPRS Configuration
3GPP Name
SPLIT_PG_CYCLE
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side and the BTS side. System
broadcasts to MS through PSI3 and SI13 messages.
CCCH SplitPgCycle support indicates if to support the SplitPgCycle
function on CCCH. Split_Pg_Cycle means sending the PACKET
IMMEDIATE ASSIGNMENT, PACKET PAGING and PACKET
Description
IMMEDIATE ASSIGNMENT REJECT messages on multiple blocks.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode

This function should be supported by the MS,
the value should be negotiated with CN and influences the calculation
of MS paging groups, so it is recommended not to enable the function.
Offline
2-1450
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.16 Packet access priority threshold

Full Name
Packet access priority threshold
Abbreviation
priAcThr
Managed Object
GPRS Configuration
3GPP Name
PRIORITY_ACCESS_THR
3GPP Reference
3GPP TS 44.018
Parameter used at the MS side. It is broadcast to the MS in the PSI13 and
SI13 messages, indicating the priority level of MS packet access allowed
Description
by the cell. as similar to the function of ACCESS CLASS.
Instance
Cell
0, 3, 4, 5, 6, 7
Unit
N/A
Default Value
Default Value
The following are allowed access to normal
If the packet access of users should be limited
by the service priority, the value should be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1451
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.17 Extended paging support

Full Name
Extended paging support
Abbreviation
epageMode
Managed Object
GPRS Configuration
3GPP Name
extended paging
3GPP Reference
3GPP TS 44.060
This parameter information is one of the page modes, indicating whether
to support extended paging.Extended paging means that MS still can receive and analyze the message within the 3rd interval after the block is
Description
indicated by its paging group.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value

The extended paging mode is configured to relieve the temporary

overload of a subchannel. The mode enables a paging message, which

is usually transmitted over a paging subchannel (PCH BLOCK) of the
CCCH, to be transmitted over the paging block after the next paging
block.
Change Mode
Offline
Related features
N/A
2-1452
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.18 USF granularity

Full Name
USF granularity
Abbreviation
usfGranularity
Managed Object
GPRS Configuration
3GPP Name
USF_GRANULARITY
3GPP Reference
3GPP TS44.060
This parameter information is assigned to the MS in the PACKET UPLINK ASSIGNMENT message, indicating that the network allocates uplink block granularity for the GPRS MS when the cell uses the medium
Description
control mode of dynamic allocation.
Instance
Cell
0: allocation granularity is 1 for uplink block
1: allocation granularity is 4 for uplink block
Unit
N/A
Default Value
Default Value
Consider the RLC block utilization and PS traffic model
The value is dependent upon the block utilization,
uplink and downlink data transmission, and radio resources.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1453
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.19 Cell support extended uplink TBF

Full Name
Cell support extended uplink TBF
Abbreviation
EXT_UTBF
Managed Object
GPRS Configuration
3GPP Name
NW_EXT_UTBF
3GPP Reference
3GPP TS44.060
This parameter indicates if the cell supports extended uplink TBF. After
BSS receives CV=0 uplink block, if the cell supports extended uplink
TBF, it enters into extended uplink TBF status. At this time, it continues
assign uplink block resource to MS. If new uplink data is required to send
during extended uplink, re-establishment of uplink TBF is not required.
This function requires extended uplink function shall be supported at
Description
MS side.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Consider MS capability and PS traffic model
2-1454
SJ-20130408140048-016|2013-07-17(R1.0)
According to the TBF data transmission condition, set whether TBF

continues to wait for data transmission after the last data block of the
TBF is successfully transmitted, to avoid the re-setup of the TBF, reduce
the back-and-forth delay, and accelerate the transmission of the uplink

data. (The time delay of sent and receive will be shorten after the
function is open.)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.20 Extended uplink dynamic allocation support

Full Name
Extended uplink dynamic allocation support
Abbreviation
exUpDynSupport
Managed Object
GPRS Configuration
3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
3GPP Reference
3GPP TS44.060
This parameter indicates if cell supports extended uplink dynamic allocation. While using this function, the MS only need listen USF allocation
with the least timeslot, so you can determine to send uplink block on all
Description
allocated uplink timeslot.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
0
2-1455
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Consider Radio Resource Utilization and PS tarffic Model

The value is dependent upon the function supported

by the MS, PS service data transmission on the uplink, and uplink

radio resources. If the transmission on the uplink takes priority
or uplink resources are adequate, the uplink transmission rate can
be improved with this function enabled.
Change Mode
Offline
Related features
ZGO-03-02-007 Extended Dynamic Allocation
Related Parameters
ExUpDynSupport
Relationship
This parameter is valid if the BSC-level parameter is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.21 Uplink delay time

Full Name
Uplink delay time
Abbreviation
ulDelayTime
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter describes the uplink TBF delay time. When the uplink
TBF is released, if the extended uplink TBF function is not supported,
start this timer to access to the uplink delay state and wait for the arrival
of the downlink LLC.
Description
The uplink TBF is released if the timer expires.
Instance
Cell
0..4000
Unit
ms
2-1456
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
1000
Default Value
Consider Gb Interface RTT

The value is dependent upon the downlink delay

time at the Gb interface. If the delay time is long and the interval
between the uplink and downlink data transmission is long, increase
the delay time as needed.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.22 Downlink delay time

Full Name
Downlink delay time
Abbreviation
dlDelayTime
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter indicates the downlink TBF delay time. When the downlink TBF is released, start this timer to access to the delay state and wait
for new downlink LLC frame. The downlink TBF is released if the timer
Description
expires.
Instance
Cell
500..4000
Unit
ms
2-1457
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
2000
Default Value
Consider RTT between MS and CN

The value is dependent upon the delay time
between the MS and CN. If the downlink data is discontinuous and the
interval is long, increase the delay time as needed.
Change Mode
Offline
Related features
ZGB-03-05-013 Delayed TBF Release in DL
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.23 Extended uplink TBF time

Full Name
Extended uplink TBF time
Abbreviation
extUlTBFTime
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the extended uplink TBF delay time. When the
uplink TBF is released, if the extended uplink TBF function is supported,
start this timer to access to the extended uplink TBF state and wait for
Description
new uplink LLC frame. The uplink TBF is released if the timer expires.
Instance
Cell
0..3000
Unit
ms
Default Value
1500
2-1458
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
general value
A larger value indicates a faster uplink re-establishment but
lower resource utilization. A lower value indicates a slower uplink
re-establishment but improved resource utilization.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.24 RRBP Interval of GPRS downlink TBF

Full Name
RRBP Interval of GPRS downlink TBF
Abbreviation
gprsDlRRBPInterval
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Interval that downlink Gprs TBF requires MS to send Packet Downlink
Description
Ack/Nack.
Instance
Cell
3..20
Unit
N/A
Default Value
10
Default Value
Set it based on normal radio conditions.
2-1459
SJ-20130408140048-016|2013-07-17(R1.0)
If this parameter is set to a low value, for GPRS service, MS's downlink
receiving bitmap information can be notified to BSC in a faster way, but
more uplink signaling blocks are occupied. If this parameter is set to a
great value, MS's downlink receiving bitmap information are notified to

BSC slowly and less uplink signaling blocks are occupied. The value
needs no modification unless specially required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.25 Interval number of uplink GPRS TBF's ACK

Full Name
Interval number of uplink GPRS TBF's ACK
Abbreviation
gprsUlAckInterval
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the interval that the uplink GPRS TBF network
Description
sends packet uplink ACK/Nack to the MS.
Instance
Cell
3..20
Unit
N/A
Default Value
10
Default Value
It is recommended to set the default value as 10 when the percentage
of the downlink voice RQ0~5 is around 97%.
2-1460
SJ-20130408140048-016|2013-07-17(R1.0)
The smaller the value is, the fewer the GPRS

services are, the faster the uplink received bitmap information of
the MS can be notified to BSC, and the more the downlink signalling
blocks are occupied. The larger the value is, the more the GPRS
services
are, the slower the uplink received bitmap information of the MS can
be notified to BSC, and the fewer the downlink signalling blocks are
occupied. If no special requirement, the value should not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.26 Uplink measurement report period

Full Name
Uplink measurement report period
Abbreviation
ulMeasurePeriod
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter is used by UPPB, describing the uplink measurement report period reported by BTS and handled by BSC. The measurement report is obtained by the BTS in accordance with the uplink level and quality
Description
of the MS.
Instance
Cell
400..2000
Unit
ms
2-1461
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
800
Default Value
Depends on the number of received measure report and the measure
report window
The value is dependent upon the number of the
received measurement reports, and the window size.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.27 T3142
Full Name
T3142
Abbreviation
t3142
Managed Object
GPRS Configuration
3GPP Name
T3142
3GPP Reference
3GPP TS 44.018
The timer is used during packet access on CCCH and during packet
access while in dedicated mode. It is started after the receipt of an
IMMEDIATE ASSIGNMENT REJECT or a DTM REJECT message.
Its value is given by the network in the IMMEDIATE ASSIGNMENT
REJECT or DTM REJECT message.
The mobile station is not allowed to make a new attempt for packet
access in the same cell until T3142 expires, but may attempt packet
access in an other cell after successful cell reselection for radio
conditions reasons (see 3GPP TS 45.008). The value of the wait
Description
indication (i.e. T3142) relates to the cell from which it was received.
2-1462
SJ-20130408140048-016|2013-07-17(R1.0)
The mobile station may initiate RR connection establishment in the

same cell before T3142 has expired.
Instance
Cell
0..255
Unit
Default Value
Default Value
according to the general network traffic load
when the RACH resource is inadequate, the value
should be lager.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.28 T3172
Full Name
T3172
Abbreviation
t3172
Managed Object
GPRS Configuration
3GPP Name
T3172
3GPP Reference
3GPP TS 44.060
2-1463
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used at the MS side. It is notified to the MS through

WAIT_INDICATION carried in the PACKET ACCESS REJECT message.
This timer starts if the MS receives PACKET ACCESS REJECT
message
during packet access. The MS disables packet access if this timer
is timeout. The MS changes to idle status if this timer is timeout
prior to receiving assignment message. After this timer timeout, the
MS does not disable packet access in this cell, but shall not take
channel request as paging response except the MS receives paging
request
Description
message.
Instance
Cell
0..255
Unit
Default Value
Default Value
when the RACH resource is inadequate, the value
should be lager.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.29 Max times of packet assignment resend

Full Name
Max times of packet assignment resend
2-1464
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
psAssReSendMax
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
When the number of times of resending assignment messages exceeds
the maximum number of times of resending packet assignment
messages specified at background, the TBF Release message is resent
to notify MS to release TBF.
During the service process, if CTRL_ACK is lost, then judge the
assignment type that MAC is waiting for. If the assignment type is
consistent with that MAC is waiting for, then the number of resending
assignment messages increments and the uplink/downlink assignment
message is resent. If it exceeds the maximum number of resending
assignment messages but the assignment acknowledgement message
from MS is still not received, then the TBF Release message is issued
from network and TBF is released. If the assignment type is inconsistent
with that MAC is waiting for, then the assignment timer is cleared and
the assignment message will not be resent.
Description
Instance
Cell
0..10
Unit
N/A
Default Value
Default Value

When this function is enabled, if the assignment
message is lost, it will be re-sent to keep its service from abnormal
due to poor radio quality or other abnormal cases.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1465
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.30 Enable no data during extended uplink TBF mode

Full Name
Enable no data during extended uplink TBF mode
Abbreviation
enExUpDynSupport
Managed Object
GPRS Configuration
3GPP Name
EXT_UTBF_NO_DATA
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the mobile station during extended
uplink TBF mode may refrain from sending PACKET UPLINK DUMMY
CONTROL BLOCK messages when there is no other RLC/MAC block
ready to send in an uplink radio block allocated by the network.
0 The mobile station shall send a PACKET UPLINK DUMMY CONTROL
BLOCK message when there is no other RLC/MAC block ready to send
in an uplink radio block allocated by the network.
1 The mobile station may refrain from sending a PACKET UPLINK
DUMMY CONTROL BLOCK message when there is no other RLC/MAC
Description
block ready to send in an uplink radio block allocated by the network.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
MS not supported normally, refer to application later
If the extended TBF function is enabled, it
is recommended to enable the function to save the MS' power.
Change Mode
Offline
Related features
ZGO-04-02-014 Extended uplink TBF mode
Related Parameters
EXT_UTBF
Relationship
This function should be enabled with EXT_UTBF.
Related Interfaces
Um
Impact on Equipment
2-1466
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.31 Initial Coding Scheme of GPRS uplink TBF

Full Name
Initial Coding Scheme of GPRS uplink TBF
Abbreviation
gprsCodecInitUl
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the coding scheme used by the initial assignment when the MS perfoms access at the uplink to implement GPRS ser-
Description
vices.
Instance
Cell
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Default Value
Use the middle value based on the network condition.
Set the parameter based on the network's radio quality. If the quality is
bad, set a low value. Otherwise, set a large value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1467
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.32 Initial Coding Scheme of GPRS downlink TBF

Full Name
Initial Coding Scheme of GPRS downlink TBF
Abbreviation
gprsCodecInitDl
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the coding scheme used by the initial assignment when the MS perfoms access at the downlink to implement GPRS
Description
services.
Instance
Cell
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Default Value
Use the middle value based on the network condition.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1468
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.33 Maximum coding scheme of GPRS uplink TBF

Full Name
Maximum coding scheme of GPRS uplink TBF
Abbreviation
gprsCodecMaxUl
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum coding scheme supported by the
Description
uplink TBF when the MS performs GPRS services.
Instance
Cell
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Default Value
Use the maximum value based on the network condition.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1469
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.34 Maximum coding scheme of GPRS downlink TBF

Full Name
Maximum coding scheme of GPRS downlink TBF
Abbreviation
gprsCodecMaxDl
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum coding scheme supported by the
Description
downlink TBF when the MS performs GPRS services.
Instance
Cell
0: CS1
1: CS2
2: CS3
3: CS4
Unit
N/A
Default Value
Default Value
Use the maximum value based on the network condition.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1470
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.35 PS preemption support

Full Name
PS preemption support
Abbreviation
psPreemptionInd
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
When PFC is supported, iBSC allocates radio resources according to
user's subscribed QoS parameter.
When the user's subscribed QoS parameter can't be satisfied and the
user's QoS parameter allows preemption, if this switch is enabled, the
Description
user can preempt the radio resource with low priority.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

When this switch is enabled, the user can preempt
the radio resource with low priority services. This function is valid
until the PFC function is supported. You can decide whether to enable
this function according to the on-site requirement.
Change Mode
Offline
Related features
Related Parameters
PFCSupport
Relationship
This parameter is valid until the FFC function is supported by the system.
Related Interfaces
Um
2-1471
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.36 PS queuing support

Full Name
PS queuing support
Abbreviation
psQueueInd
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
If PFC is suppoted, iBSC allocates radio resource according to signature
QoS parameters from user side. When QoS guarantee rate for user
signature is unsatisfied (including through grabbing), and the QoS
parameter allows queuing, and if this parameter is enabled, iBSC
allocates radio resource to user according to Best Effort, and insert the
user into the queue, to wait for allocation of radio resource. Queuing
time can be gotten through PFC process; otherwise if this parameter is
disabled, access to this service is directly refused.
Description
When this parameter is Yes, you can configure PsMaxQueueInstNum.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

When this switch is enabled, the IBSC allocates

radio resources to the user according to Best Effort, and make the
user jump into the queue, to wait for the allocation of radio resources.
This function needs to be supported by the FFC function and is better
to be disabled.
2-1472
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
PFCSupport
PsMaxQueueInstNum
Relationship
This parameter is valid until the FFC function is supported by the system.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.37 Resource adjust threshold

Full Name
Resource adjust threshold
Abbreviation
resourceAdjustThs
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
During PS services, the resource adjustment is judged in the following
two cases. :1, The Ranps instance will perform handshake with the
Mac instance, with a period of 5 s. The user plane judges the resource
adjustment when it receives handshake requirement from Ranps. 2,
When the downlink is established on the uplink TBF or the uplink is
established on the downlink TBF, judge the resource adjustment. The
packet resource adjustment threshold is used for the algorithm to judge
packet resources adjusted from a single timeslot to multi-timeslot.
The judgement principle is as follows:
When the uplink and downlink traffic is lower than the packet resource
adjustment threshold, the adjustment is not performed.
When the uplink traffic is greater than the downlink traffic adjust the
Description
uplink preferentially.
2-1473
SJ-20130408140048-016|2013-07-17(R1.0)
When the uplink traffic is lower than the downlink traffic, and the downlink
traffic - the uplink traffic < packet resource adjustment threshold/4, adjust
the uplink preferentially.
In other cases, adjust the downlink preferentially.
Instance
BSC
200..50000
Unit
BYTE
Default Value
2000
Default Value

The larger the parameter value is, the more
difficult the sum of uplink and downlink traffic can reach this threshold,
and therefore the less likely the resource adjustment will be performed.

Even the sum of uplink and downlink traffic reaches the threshold,
the difference between uplink and downlink traffic is more difficult
to reach a quarter of the threshold, which more likely results in
resource adjustment based on uplink priority. This parameter can be
appropriately reset on field to adjust the initiation speed and direction
priority of resource adjustment.
Change Mode
Offline
Related features
N/A
Related Parameters
IPResrcAdjuThs
Relationship
ResourceAdjustThs>=IPResrcAdjuThs
Related Interfaces
GB
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.38 GDpiAppSrv DN
Full Name
GDpiAppSrv DN
2-1474
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
refGDpiAppSrvProfile
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the DPI application scenario to which the cell
belong, including the ordinary and business scenarios. It can also be
Description
defined by the busy and idle periods.
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.39 Downlink TBF pre-establish support

Full Name
Downlink TBF pre-establish support
Abbreviation
EarlyDlTBFEstSupp
Managed Object
GPRS Configuration
2-1475
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the cell supports the pre-establish-
Description
ment of downlink TBF.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Not a basic function, disabled by default.
The feature is disabled generally, and enabled
in special cases such as to reduce the delay of the first packet.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.40 PS channel alloc reduction support

Full Name
PS channel alloc reduction support
Abbreviation
SuppReducePd
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1476
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether the cell supports reducing the number
Description
of PDTCHs in use based on the PDTCH load.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Not a basic function, disabled by default.

To increase the number of accessed mobile phones
and reduce the error ratio of TBF establishment in case of high traffic
load in a cell, enable the feature.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.41 Initial limit threshold of PDTCH alloc

Full Name
Initial limit threshold of PDTCH alloc
Abbreviation
LmtThreshold_0
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1477
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the initial limit on the number of PDTCHs. When the
channel load meets the condition:
Description
initial limit<= channel load < medium limit, one channel can be reduced.
Instance
Cell
65..74
Unit
Default Value
70
Default Value
Enable the initial limit on channel distribution
when the traffic reaches a certain volume.
The larger the value, the higher the initial
limit is.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.42 Medium limit threshold of PDTCH alloc

Full Name
Medium limit threshold of PDTCH alloc
Abbreviation
LmtThreshold_1
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1478
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is the medium limit on the number of PDTCHs. When

the channel load meets the condition:
medium limit<= channel load < maximum limit, two channels can be
Description
reduced.
Instance
Cell
75..84
Unit
Default Value
80
Default Value
Enable the medium limit on channel distribution
when the traffic reaches a higher volume.
The larger the value, the higher the medium
limit is.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.43 Maximum limit threshold of PDTCH alloc

Full Name
Maximum limit threshold of PDTCH alloc
Abbreviation
LmtThreshold_2
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the maximum limit on the number of PDTCHs. When
Description
the channel load is greater this limit, four channels can be reduced.
2-1479
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
85..94
Unit
Default Value
90
Default Value
Enable the maximum limit on channel distribution
when the traffic is very high.
The larger the value, the higher the maximum
limit is.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.44 Damping of PDTCH alloc from limit to non-limit

Full Name
Damping of PDTCH alloc from limit to non-limit
Abbreviation
LmtThreshold_3
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used to avoid frequent changes between limited chan-
Description
nel allocation and unlimited channel allocation.
Instance
Cell
0..15
Unit
2-1480
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Reduce frequent changes between limited channel
allocation and unlimited channel allocation.

The smaller the parameter value, the more probable

the traffic is subject to changes between limited channel allocation

and unlimited allocation. The larger the value, the less probable
the traffic is subject to such changes, but the sensibility to channel
load changes is reduced.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.33.45 GPRS phones init. Code can be changed

Full Name
GPRS phones init. Code can be changed
Abbreviation
initAttachExchGprs
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the coding mode used by the GPRS
MS in a cell can be dynamically changed.
0: the coding ,mode cannot be dynamically changed.
Description
1: the coding mode can be dynamically changed.
Instance
Cell
1: Yes
0: No
2-1481
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
The adaptive coding scheme can improve the data throughput

The value is better set to Yes in accordance
with the adaptive coding scheme of radio environment, so as to improve
the packet transmission rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.46 Maximal resource for POC service

Full Name
Maximal resource for POC service
Abbreviation
POCSrcThs
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
2-1482
SJ-20130408140048-016|2013-07-17(R1.0)
Push to Talk over Cellular (PoC) is a push-to-talk service based on a

mobile network and Voice over Internet Protocol (VoIP).
The PoC service defines a half-duplex VoIP system for mobile devices
based on a packet-switched capacity of the radio data network.
The PoC service will affect the allocation policies of the packet-switched
channel as follows:
1. If there are PoC subscribers on the packet-switched channel, a new
common packet-switched service cannot be allocated to this channel
until all the PoC subscribers are released.
2. All PoC subscribers should be allocated to a channel on which PoC
subscribers have exist in a centralized manner until the channel is
congested.
This parameter indicates a percentage of the existing packets-switched
channels (static PDCH channel + dynamic PDCH channel unoccupied
Description
by CS) occupied by the PoC service.
Instance
Cell
0..100
Unit
Default Value
50
Default Value
PoC attribute function enabled or disabled. The function should be
disabled.

The function should be disabled.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1483
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.47 Gprs Initial access rate

Full Name
Gprs Initial access rate
Abbreviation
GprsIniAccRate
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates a bandwidth use for initial access and admission
Description
when the GPRS channel is activated.
Instance
Cell
1..22
Unit
kb/s
Default Value
22
Default Value
Set the parameter based on the bandwidth of MCS6 with normal rate.
Set this parameter based on the network's radio quality and bandwidth.
A greater initial access and admission bandwidth indicates a higher
initial access rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.48 Downlink Delay Signal TBF Time

Full Name
Downlink Delay Signal TBF Time
2-1484
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
DlSigDelayTime
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter indicates downlink delay time of Temporary Block Flow
Description
(TBF).
Instance
Cell
0..4000
Unit
ms
Default Value
2000
Default Value
The downlink delay time of TBF is consistent with the setting of the
previous parameter "downlink delay time".
The parameter should not be modified. If the value is modified, it will
affect QoS.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.49 Extended uplink Signal TBF time

Full Name
Extended uplink Signal TBF time
Abbreviation
ExtUlSigTBFTime
Managed Object
GPRS Configuration
3GPP Name
None
2-1485
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS44.060
Description
This parameter indicates uplink extended time of TBF.
Instance
Cell
0..3000
Unit
ms
Default Value
1500
Default Value
The uplink extended time of TBF is consistent with the setting of the
previous parameter "uplink extended timer".
The parameter should not be modified. If the value is modified, it will
affect QoS.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.50 Support splitting uplink tcp ack datagram

Full Name
Support splitting uplink tcp ack datagram
Abbreviation
SuppTcpAckSplit
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter enables or disables an uplink TCP acknowdelgement
Description
message to be split in TCP optimization.
Instance
Cell
2-1486
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value

The function is enabled or disabled as required.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.51 Support copying uplink tcp ack datagram

Full Name
Support copying uplink tcp ack datagram
Abbreviation
SuppTcpAckCopy
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter enables or disables an uplink TCP acknowdelgement
Description
message to be copied in TCP optimization.
Instance
Cell
0: No
1: Yes
Unit
N/A
2-1487
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.52 Support discarding duplicate uplink tcp ack datagram

Full Name
Support discarding duplicate uplink tcp ack datagram
Abbreviation
SuppDupTcpAckDisc
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
3GPP TS44.060
This parameter enables or disables an uplink TCP acknowledgment mes-
Description
sage to be repeatedly discarded in TCP optimization.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

2-1488
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.53 TrxPSBusyThs
Full Name
TrxPSBusyThs
Abbreviation
TrxPSBusyThs
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter indicates the threshold of PS idleness on the carrier.
The PS idleness on the carrier is calculated as follows:
Suppose that the carrier has channels available for PS services in both
uplink and downlink, byUpNum represents the number of available
UL channels, and byDwNum represents the number of available DL
channels.
The total idleness of all available UL PS channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
This is the total of idleness of byUpNum UL channels.
The total idleness of all available DL PS channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
This is the total of idleness of byDwNum DL channels.
Description
Among the formula above,
2-1489
SJ-20130408140048-016|2013-07-17(R1.0)
Abis indicates the amount of Abis resources assigned on the channel (ip
Abis bandwidth or E1 Abis timeslot);
AbisMax indicates the maximum number of Abis resources allowed to
be assigned (ip Abis bandwidth or E1 Abis timeslot, e.g., at most 4 E1
Abis timeslots can be assigned on the PS channel of EDGE carrier);
Qos indicates the quota of Qos on the channel (the initial available
quota is 16);
Usermax indicates the maximum number of subscribers allowed for
multiplexing.
Usenum indicates the current number of subscribers on the channel.
The carrier idleness TrxIdle (value range: 0 to 100) is calculated as
follows:
If byUpNum == 0, byDwNum != 0,
Then TrxIdle = The total idleness of all available DL PS channels /
byDwNum
If byUpNum != 0, byDwNum == 0,
Then TrxIdle = The total idleness of all available UL PS channels /
byUpNum
If byUpNum != 0, byDwNum != 0,
Then TrxIdle = (The total idleness of all available DL PS channels
* byDwNum + The total idleness of all available UL PS channels *
byUpNum / (2 * byDwNum * byUpNum)
If byUpNum == 0, byDwNum == 0,
Then TrxIdle = 0 (Both UL and DL on the carrier have no idle channels,
so the idleness is 0)
The TRX selection principles when only PS idleness control is
considered are as follows:
1. If all TRX is relatively idle for PS services, a TRX is selected randomly.
This TRX is always preferred until its idleness is less than the specified
threshold. This principle is the concentrated assignment of PS services.
2. If the selected TRX idleness is less than the specified threshold, the
TRX is considered overloaded, and, to keep the balance among TRX,
another relatively idle TRX is selected until its PS service is overloaded.
3. If all TRX carriers are overloaded with PS services, a carrier with
more PS idleness is selected to meet the TRX balance principle for
PS services.
Instance
BSC
1..100
Unit
Default Value
80
2-1490
SJ-20130408140048-016|2013-07-17(R1.0)
When the default value is set to 50, PFC users occupy half channel Qos.
Default Value
For non-PFC users, the number of current users on the channels is half
the maximum number of users. In this way, the channel expansion is

controlled within a reasonable speed.
When there are sufficient PS channel resources
and high rates are required for PS services, you can set this parameter
to a lower value to expand the PS service channels to new carriers

as quickly as possible. Otherwise, set it to a higher value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.54 Cn
Full Name
Cn
Abbreviation
Cn
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
2-1491
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the statistical value to increase the coding mode
level.
Unlike the unified coding mode of the circuit channel, the GPRS data
block may employ the CS-1 to CS-4 coding modes, whose data rates
are 9.05 kbps, 13.4 kbps, 15.6 kbps, and 21.4 kbps respectively. The
low level coding mode has a higher error correction capability and
lower data throughput. Different coding modes can be chosen for each
timeslot or even each TBF.
The network selects the coding mode dynamically according to the data
rate requirement and radio transmission quality at the transmission
of GPRS data, to reach the largest radio throughput. Good radio
transmission quality means that the probability of the retransmission of
the error radio blocks is small. In this case, the coding mode that carries
large data volume (that is, high level coding mode) can be used.
When the correct block percentage of Cn[n-1]% is reached by the
consecutive Nn[n-1] data blocks in the TBF (uplink and downlink) in the
channel coding mode CSn (1n3), the grade to send a coding mode is
increased.
The footnotes 1, 2, and 3 on the interface are coding conversion
parameters between CS1 and CS2, between CS2 and CS3, and
Description
between CS3 and CS4 respectively.
Instance
BSC
0..100
Unit
Default Value
[85,85,85]
Default Value
A 15% to 25% BLER is acceptable as per the system simulation. A
BLER lower than 15% has a positive influence on the rate.

A greater value increases the difficulty of upgrading the coding mode to
ensure that the adjustment is necessary and appropriate. This avoids
rate deterioration and reduces the GPRS TBF call drop rate.

A smaller value decreases the difficulty of upgrading the coding mode.

It is recommended to use a comparatively great value so that the
coding mode is upgraded only when the BLER is very low. This helps
improve the performance indexes related to GPRS (not EDGE) service
throughput .
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
2-1492
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D.
Parameter Modifying
Detail
Update
2.33.55 Nn
Full Name
Nn
Abbreviation
Nn
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter sets the statistical value to decrease the coding mode
level.
of GPRS data, to reach the largest radio throughput. When the
radio transmission quality is bad, the coding mode with a stronger
anti-interference capability (that is, low level coding mode) shall be
used. The coding level decreases by one level if Nn[n-2] data blocks
are transmitted and the number of consecutive data blocks losses in
the coding mode CSn (2=<n=<4) for the TBF (downlink and uplink) is
Xn[n-2]%.
Description
Instance
BSC
0..255
2-1493
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
[20,20,20]
Default Value
The value 20 is appropriate to ensure sensitivity and correctness of
rate adjustment.
A greater value indicates that the system adjusts the coding mode with a
more consideration of the number of the transmitted data blocks.
A smaller value helps the system adjust the coding mode to suit the
radio environment change in a timely manner.

An appropriate setting can improve the performance indexes related to
GPRS (not EDGE) service throughput.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.56 Xn
Full Name
Xn
Abbreviation
Xn
Managed Object
GPRS Configuration
3GPP Name
None
3GPP Reference
N/A
2-1494
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the threshold for determining a decrease in the level
of the coding mode. It is used at the RLC/MAC layer of BRP.
of GPRS data, to reach the largest radio throughput. When the
radio transmission quality is bad, the coding mode with a stronger
anti-interference capability (that is, low level coding mode) shall be
used. The coding level decreases by one level if Nn[n-2] data blocks
are transmitted and the number of consecutive data blocks losses in
the coding mode CSn (2=<n=<4) for the TBF (downlink and uplink) is
Xn[n-2]%.
Description
Instance
BSC
0..100
Unit
N/A
Default Value
[25,25,25]
Default Value
A 15% to 25% retransmission rate is acceptable in normal radio
environment.
A greater value indicates that the coding mode is more difficult to be
downgraded.

It is recommended to use a comparatively low value so that the coding

mode can be downgraded once the BLER becomes great. This
avoids rate deterioration due to untimely code mode adjustment and
improves the performance indexes related to GPRS (not EDGE) service
throughput.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
2-1495
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.57 One phase access initial code selection

Full Name
One phase access initial code selection
Abbreviation
OnePhaAccIniCodSet
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
One-phase access initial code selection by configuration or by signal level
Instance
Cell
0:by configuration 1:by signal level
Unit
N/A
Default Value
Default Value
Keep it the same as that in the previous version.

To increase the initial service rate by selecting a code scheme and rate
according to the level measured over network, set this parameter to "by
signal level".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1496
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.58 Initial GPRS code scheme at one phase access

Full Name
Initial GPRS code scheme at one phase access
Abbreviation
OnePhaAccIniGCodSch
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
When the value of "OnePhaAccIniCodSet" (one-phase access initial code
Description
selection) is 0, this parameter determines the GPRS initial code scheme.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value

This parameter affects the initial access code scheme of all MSs in
the cell. Increase the value of this parameter while ensuring the link
establishment success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1497
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.33.59 Indicate Uplink and Downlink RLC Window Size value

Full Name
Indicate Uplink and Downlink RLC Window Size value
Abbreviation
RLCMaxWinInd
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the window size value of uplink EGPRS RLC data
that the system notifies the MS to send, and the window size values when
the system sends downlink EGPRS RLC data and receive uplink EGPRS
Description
RLC data.
Instance
Cell
0:average 1:Maximum
Unit
N/A
Default Value
Default Value
This parameter can be set to 1, so as to improve the throughout at the
RLC layer.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1498
SJ-20130408140048-016|2013-07-17(R1.0)
2.33.60 DTM MultiSlot Class 11 extended dynamic allocation

Full Name
DTM MultiSlot Class 11 extended dynamic allocation
Abbreviation
DTM11EDASup
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
DTM multislot 11 MSs support the extended dynamic assignment switch.
Instance
Cell
0: Not Support 1: Support
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.61 Two phase access initial code selection

Full Name
Two phase access initial code selection
Abbreviation
TwoPhaAccIniCodSet
Managed Object
GPRS Configuration
2-1499
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Two-phase access initial code selection by configuration or by signal level
Instance
Cell
0:by configuration
1:by signal level
Unit
N/A
Default Value
Default Value

To increase the initial service rate by selecting a code scheme and rate
according to the level measured over network, set this parameter to "by
signal level".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.62 Support downlink five timeslots

Full Name
support downlink five timeslots
Abbreviation
SuppDlFiveTs
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1500
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether a cell allocates five timeslots for MSs
Description
in the downlink direction.
Instance
Cell
Unit
N/A
Default Value
Default Value
By default, the original version supports the function of allocating downlink

five timeslots for MSs. The switch is on by default, which is the same as
that in the original version.

Not validated temporarily
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.63 Sending PSI13 or not

Full Name
Sending PSI13 or not
Abbreviation
PSI13SendInd
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the system sends PSI13 messages over
Description
the PACCH channel.
Instance
Cell
2-1501
SJ-20130408140048-016|2013-07-17(R1.0)
0:not send 1:send
Unit
N/A
Default Value
Default Value

Not available temporarily
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.64 Packet Neighbour Cell Data message sending times

indication
Full Name
Packet Neighbour Cell Data message sending times indication
Abbreviation
PNCDSendInd
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the number of times that the system sends the
"packet neighbour cell information" messages to the MS during cell rese-
Description
lection over network. If the value is 1, the message format is 11223344.
Instance
Cell
0:once 1:twice
2-1502
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
This parameter can be set to 1, so as to improve the probability of MSs in
receiving "packet neighbour cell information" messages.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.65 Times of interval that send downlink dummy block

Full Name
Times of interval that send downlink dummy block
Abbreviation
DlDummySendIntTime
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies a multiplier added to the existing interval of send-
Description
ing dummy blocks in downlink delay state.
Instance
Cell
1..5
Unit
N/A
Default Value
2-1503
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Same as the existing release behavior by default

As required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.66 Optimize dummy block in downlink delay state

Full Name
Optimize dummy block in downlink delay state
Abbreviation
DlDummySendOpt
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to decrease the number of sending
Description
dummy blocks in downlink delay state.
Instance
Cell
0:No
1:Yes
Unit
N/A
Default Value
Default Value
This parameter is disabled by default to optimize functions but not to
change the existing release behavior.
2-1504
SJ-20130408140048-016|2013-07-17(R1.0)

Enabled as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.67 Indication of different reselection parameters in packet idle

mode and packet transfer mode
Indication of different reselection parameters in packet idle mode and
Full Name
packet transfer mode
Abbreviation
PSReselParam2
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
mode and packet transfer mode.
Instance
Cell
0..1
Unit
N/A
Default Value
This parameter enables or disables parameter reselection in packet idle
Default Value
Disabled by default
This function is enabled when it is necessary to set different reselection
conditions in transfer mode from those in idle mode.

2-1505
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.68 supoort TBF multiplexing of active TBF

Full Name
supoort TBF multiplexing of active TBF
Abbreviation
SuppActTBF
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter enables or disables Active-TBF-based TBF multiplexing.
Instance
N/A
0..1
Unit
N/A
Default Value
Default Value
This function can be enabled to improve the channel utilization rate and
TBF multiplex density.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1506
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.33.69 Optimize pending block in downlink transfer state

Full Name
Optimize pending block in downlink transfer state
Abbreviation
TransPendingOpt
Managed Object
GPRS Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to decrease the number of sending
Description
pending blocks in downlink transfer state.
Instance
Cell
0:No
1:Yes
Unit
N/A
Default Value
Default Value
This parameter is disabled by default to optimize functions but not to
change the existing release behavior.

Enabled as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
2-1507
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34 PS Channel Schedule Configuration

(GPsChannelSchedule)
2.34.1 PS Channel Schedule Configuration ID
Full Name
PS Channel Schedule Configuration ID
Abbreviation
GPsChannelSchedule
Managed Object
PS Channel Schedule Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
PS Channel Schedule Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1508
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->GPRS Configuration->PS Channel Schedule

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.2 Minimal number of idle CS channel

Full Name
Minimal number of idle CS channel
Abbreviation
csChansThs
Managed Object
3GPP Name
None
3GPP Reference
N/A
Idle CS channels (including the idle and dynamic TCH channel, and the
static TCH channel) are reserved in the cell for reducing CS call failure
rate.After the CS channel has been applied for successfully, if the number
of idle CS channels in the current cell is smaller than the threshold, try to
perform such operations as starting intelligent powerup or releasing the
PS channel forcibly, so as to ensure the number of idle CS channels is
Description
greater than the threshold.
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
The default value is used to reduce CS call

failure rate, and ensure that each time idle channels are available
for CS request to access successfully.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1509
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.3 PS preempt CS support

Full Name
PS preempt CS support
Abbreviation
psPrmpCsSupport
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter indicates when the dynamic channel with preferred PDCH
Description
is occupied, to determine if the channel can be preempted by PS service.
Instance
Cell
1: Support
Unit
N/A
Default Value
Default Value
This is a functional switch which supports
PS in preempting CS and is disabled by default.
If radio resources are limited, this switch
can be enabled to ensure the number of necessary PS channels.
Change Mode
Offline
Related features
N/A
Related Parameters
PDCHPrecedence
0: Not Support
PSservice can only the channel configured with

Relationship
the PDCHPrecedence attribute, so this parameter is valid only when

the channel is configured with this attribute.
2-1510
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.4 CS subscriber moving support

Full Name
CS subscriber moving support
Abbreviation
AllowCsMove
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter describes whether to support moving in the CS-service
cell on a dynamic channel when resources are idle and the CS channel is released, to make the continuity of available PS timeslot group
maximized. The following determins whether resources are idle: All
idle CS-service channels (including static and dynamic TCHs) in the
cell/ number of available service channels in the cell <= alarm threshold
Description
(ResLimit[3] )for cell channel resources.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value

Change Mode
This function can be enabled when radio resources

are comparatively sufficient, so as to ensure the maximum continuity
of the PS channel and the rate of PS service.
Offline
2-1511
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGO-03-02-009 Flexible Priority Handling of Packet Data Channel
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.5 EDGE initial downlink allocation by multislot class1

Full Name
EDGE initial downlink allocation by multislot class1
Abbreviation
edgeInitDlClass
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the initial downlink timeslot is allocated
in consistent with MS multi-slot class 1 or not.
YES: Initial timeslot allocation is in consistent with MS multi-slot class 1.
Description
NO: Initial timeslot allocation is in consistent with MS real multi-slot class.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
ensure the burst and small package servie throughput

If the PDCHs and Abis resources are enough,
set the value as No; if the PDCHs and Abis resources are not enough,
set the value as Yes.
2-1512
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.6 GPRS initial downlink allocation by multislot class1

Full Name
GPRS initial downlink allocation by multislot class1
Abbreviation
gprsInitDlClass
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter is to indicate whether the initial channel allocation on the
downlink is based on multislot capability 1 (i.e. uplink 1 downlink 1) or
based on the MS' actual multislot capability specified in downlink assignment. It is recommended to allocate in accordance with the multislot capability 1 when the channels or ABIS transmission resources are inade-
Description
quate, to prevent rapid expansion of channels.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The value is 1 by default, to prevent rapid
expansion of channels.
2-1513
SJ-20130408140048-016|2013-07-17(R1.0)
If radio resources and ABIS resources are adequate,
this value can be set as "No" to reduce the times of resource adjustment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.7 PS channel expand support

Full Name
PS channel expand support
Abbreviation
psChlExpandSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether PS channel expansion is supported.
For example, if the number of channels that MS uses currently is 2+1
and MS can use more timeslots, then the channel mode is automatically
expanded to 3+1 or 4+1 after adjacent CS channel is released.
When the PS channel expansion is enabled to be supported, and the
ratio of idle TCH channels in the cell is greater than the idle TCH channel
threshold when the PS channel is expanded, PS channel expansion is
performed. After this function is enabled, The PS service of some radio
channels preempted can be resumed to use more radio channels, to
Description
improve the radio channel utilization and PS service throughput.
Instance
Cell
2-1514
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value

If there are many cases that the CS services grab the PS service
channels, this function can be enabled.
This function can resume more radio channels for PS services.
Change Mode
Offline
Related features
ZGO-03-02-012 PS Channel Extension
Related Parameters
N/A
Relationship
Set the switch of channel extension to "Yes", and the TCH channel
threshold will be effective during PS channel extension.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.8 Threshold of idle tch for PS channel expand

Full Name
Threshold of idle tch for PS channel expand
Abbreviation
tchIdleThsForPSExp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1515
SJ-20130408140048-016|2013-07-17(R1.0)
When the ratio of idle TCHs of the cell is greater than this threshold, PS
channel expansion will be performed.
The ratio ofdile TCH channels in the cell is calculated as follows: (
number of idle TCH/F channels in the cell + number of TCH/H channels (
2 TCH/H channels are regarded as 1 TCH/F channel))/ available service
Description
channels in the cell.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
Low threshold is good for PS channel extension.
extension that starts when there are more CS services. High threshold
will delay the start PS channel extension that starts when there are
Low threshold is good for the start of PS channel
less CS services.
Change Mode
Offline
Related features
ZGO-03-02-012 PS Channel Extension
Related Parameters
psChlExpandSupport
Set the switch of channel extension to "Yes",
Relationship
and the TCH channel threshold will be effective during PS channel

extension.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.9 PS busy threshold

Full Name
PS busy threshold
2-1516
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
psBusyThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the cell busyness is greater than this threshold, a maximum of one
dynamic TCHF channel of new PS services is allowed to be converted
into PD.Cell busyness is calculated in accordance with the formula: the
numerator: "TCHF channels occupied + TCHH channel occupied" / "2
+ non-blocked static PD channel + busy dynamic PD channel", the denominator: "all available TCH/H/2" + "available dynamic and static PDCH
Description
channels in current status").
Instance
Cell
1..100
Unit
Default Value
80
Default Value
If over 80% of the channels are occupied, the

cell has large traffic. In this case, it is recommended not to expand
PS channels.
The smaller the value is, the more the expansion
of PS services in the cell is limited.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1517
SJ-20130408140048-016|2013-07-17(R1.0)
2.34.10 Maximum PS uplink user per ts

Full Name
Maximum PS uplink user per ts
Abbreviation
MaxPsUserPerTsUl
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter describes maximum PS uplink user per ts.
If on site the packet traffic is large, hardware load is high, and capacity
expansion is impossible temporally, the user can modify this parameter
to reduce the number of downlink packet users supported by the
channel. In this way, the packet traffic volume is actually reduced, which
helps reduce hardware load.
If this value is decreased, the KPI indexes of the packet service, such as
Description
downlink TBF link success rate, are reduced indirectly.
Instance
Cell
1..7
Unit
N/A
Default Value
Default Value
The default value 4 ensures to balance the
channel congestion rate and resource utilization rate.

If the value is small, it causes radio resources congestion when the data
traffic is busy, thereby the uplink TBF establishment success rate is
influenced.
If the value is large, PDTCH supported by users is not limited manually,

but users' feeling may be influenced because the PDTCH is multiplexed
too much.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-1518
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.11 Max PS downlink user per TS

Full Name
Max PS downlink user per TS
Abbreviation
MaxPsUserPerTsDl
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter describes the maximum PS downlink users allowed
by a single timeslot.
The PS with a single timeslot supports a maximum of 16 users at
downlink. The traffic is medium. The default value is 6. Adjust the
value according to the traffic volume. If this value is decreased, the KPI
indexes of the packet service, such as downlink TBF link success rate,
are reduced indirectly. If the downlink TBF link setup success rate of
packet service is low and the packet channel resources are sufficient as
Description
required by the user, a high value is recommended.
Instance
Cell
1..16
Unit
N/A
Default Value
16
Default Value
The default value 6 ensures to balance the
channel congestion rate and resource utilization rate.

If the value is small, it causes radio resources congestion when the data
traffic is busy, thereby the uplink TBF establishment success rate is
influenced.
If the value is large, PDTCH supported by users is not limited manually,

but users' feeling may be influenced because the PDTCH is multiplexed
too much.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
2-1519
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.12 Multislot allocation of extended range cell support

Full Name
Multislot allocation of extended range cell support
Abbreviation
MultiTsOfExtendCell
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether an extended cell supports multi-timeslot
allocation. The extended cell can allocate 1 to 3 channels in accordance
Description
with MS' multi-timeslot capability.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
is not enabled at the suggestion.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
0
2-1520
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.13 Support CS preempt PS optimization

Full Name
Support CS preempt PS optimization
Abbreviation
CSPreemptPSOpti
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the switch is on and CS-PS preemption exists, call drop does not
Description
occur in PS services in case of not RRBP or TA timeslots.
Instance
Cell
Unit
N/A
Default Value
Default Value
New function. By default, it is disabled.

In the case of preemption from CS to PS, determine the usage of dynamic
PS channels. After this function is enabled, non-RRBP and non-TA
timeslots are preempted with priority. Determine whether to enable this

function as required on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1521
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Configuration->GPRS Configuration->PS Channel Schedule Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.34.14 Initial priority direction of multislot capability

Full Name
Initial priority direction of multislot capability
Abbreviation
InitMultiSlotPriDir
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Uplink priority, downlink priority or uplink extended dynamic priority of initial
Description
assignment
Instance
Cell
0:uplink priority 1:downlink priority 2:uplink extended dynamic priority
Unit
N/A
Default Value
Default Value
It is not recommended to adjust this value in existing networks. The uplink
priority is only used for test purpose.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1522
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.34.15 Support the discontinuous PDTCH allocation

Full Name
Support the discontinuous PDTCH allocation
Abbreviation
DisContinuAllocSup
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Discontinuous PDTCH allocation, helping allocate PS users with more
Description
PDTCH channels
Instance
Cell
Unit
N/A
Default Value
Default Value
New function. By default, it is disabled.

Discontinuous PDTCH allocation is supported. In the case of dynamic
channel allocation, discontinuous PDTCH allocation may occur due to the
preemption from CS to PS. For timeslots 3, 4 and 6, only two channels
are allocated for PS services if discontinuous channel allocation is not
supported. Otherwise, three channels can be allocated. When more

channels are allocated for PS services, the probability of preemption from
CS to PS increases. Therefore, determine whether to enable this function
as required on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1523
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35 GPRS-EDGE Schedule Configuration

(GGprsEdgeSchedule)
2.35.1 GPRS-EDGE Schedule Configuration ID
Full Name
GPRS-EDGE Schedule Configuration ID
Abbreviation
GGprsEdgeSchedule
Managed Object
GPRS-EDGE Schedule Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
GPRS-EDGE Schedule Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
GUI: Managed Element->GSM Logical Configuration->Cell
OMC Access Path
Information Configuration->GPRS Configuration->EDGE

Configuration->GPRS-EDGE Schedule Configuration
2-1524
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35.2 Subscriber occupying other preference channel support

Full Name
Subscriber occupying other preference channel support
Abbreviation
HybridOccuSupp
Managed Object
3GPP Name
None
3GPP Reference
N/A
GPRS and EGPRS are available to properties of PreferPsService of the
static PD channel and dynamic channnels. This parameter describes
whether to support GPRS subscriber occupying the EGPRS preference
channel, and whether EDGE subscribers can occupy the GPRS prefer-
Description
ence channel.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
GPRS users can occupy EDGE preference channel by default.
EDGE users can occupy GPRS preference channel by default.

The value is set as "No", to ensure the access
rate of EDGE users and to prevent the GPRS users from interfering
the rate of EDGE users. If the radio resources are limited, to a certain
extent, the rate is allowed to be decreased, and set the value as

"Yes" to allow the EGPRS users, together with the EDGE users, occupy
the preference channel.
Change Mode
Offline
Related features
Related Parameters
PreferPsService
This parameter is valid only when the attribute
Relationship
PreferPsService of the channel is configured as GPRS preferred or

EDGE preferred.
Related Interfaces
Um
2-1525
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35.3 PS subscriber moving out of other preference channel

support
Full Name
PS subscriber moving out of other preference channel support
Abbreviation
AllowPsMove
Managed Object
3GPP Name
None
3GPP Reference
N/A
This parameter describes whether to support the subscriber moving out
of other preference channel. That is to say, if a GPRS subscriber occupies the EDGE preference channel and there is GPRS subscriber released on iother channel, the system will try to move GPRS subscribers
out of the EDGE preference channel. If the EDGE subscriber occupies
the GPRS preference channel and there is EDGE subscriber released on
other channel, the system will try to move EDGE subscribers out of the
Description
GPRS preference channel.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
2-1526
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35.4 Threshold of GPRS/GPRS,EDGE/EDGE service moving

Full Name
Threshold of GPRS/GPRS,EDGE/EDGE service moving
Abbreviation
sfPreferBusyThs
Managed Object
3GPP Name
None
3GPP Reference
N/A
During this PS application, on the gained preferential channel on this
side, it is better that existing QoS quota / total available QoS quota
is lower than allocated result for this percentage, to calculate target
evaluation target function in combination with un-congeneric occupying
threshold.
If the AllowPsMove switch is enabled, and one GPRS subscriber on the
GPRS preferential channel is released, the system will try to initiate
the moving of GPRS subscribers on the EDGE preferential channel. If
the number of GPRS subscribers occupying on the EDGE preferential
channel exceeds OpPreferBusyThs (un-congeneric occupying
threshold)., and SfPreferBusyThs (congeneric occupying threshold) is
lower than the threshold after moving, the system will initiate PS moving.
If EDGE subscribers occupy the GPRS preferntial channel, after EDGE
subscribers on other channel are released, the system will try to move
Description
EDGE subscribers out of the GPRS oreferential channel.
Instance
Cell
2-1527
SJ-20130408140048-016|2013-07-17(R1.0)
0..100
Unit
Default Value
100
Default Value
It is recommended not to adjust the default
value but set it as 100 (that is, this parameter is invalid).

It is recommended not to adjust the value but set it as 100 (that is, this
parameter is invalid).
This parameter is valid until the GPRS preference channel and EDGE
preference channel are set.
When the idle channels are unavailable, the GPRS users can be
allocated to the non-congeneric preference channel, to prevent the

GPRS users and EDGE users from multiplexing channels, which

influences the user rate.
If the value is 100%, it prevents the GPRS users and EDGE users from
multiplexing channels, thereby relative index of EDGE user throughput
can be improved.
It is recommended to adjust the value as 80 if the proportion of the
GPRS users to the EDGE users in the cell fluctuates greatly.
You can adjust the value if the GPRS and EDGE preference channels
are inadequate.
Change Mode
Offline
Related features
Related Parameters
AllowPsMove
OpPreferBusyThs
This parameter, which should be used with the
Relationship
parameter SfPreferBusyThs, is valid until the AllowPsMove switch is

enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1528
SJ-20130408140048-016|2013-07-17(R1.0)
2.35.5 Threshold of GPRS/EDGE service moving

Full Name
Threshold of GPRS/EDGE service moving
Abbreviation
opPreferBusyThs
Managed Object
3GPP Name
None
3GPP Reference
N/A
During this PS application, on the gained preferential channel on the
opposiste side, it is better that existing QoS quota / total available QoS
quota is lower than allocated result for this percentage, to calculate target
evaluation target function in combination with congeneric occupying
threshold.
If the AllowPsMove switch is enabled, and one GPRS subscriber on the
GPRS preferential channel is released, the system will try to initiate
the moving of GPRS subscribers on the EDGE preferential channel. If
the number of GPRS subscribers occupying on the EDGE preferential
channel exceeds OpPreferBusyThs (un-congeneric occupying
threshold)., and SfPreferBusyThs (congeneric occupying threshold) is
lower than the threshold after moving, the system will initiate PS moving.
If EDGE subscribers occupy the GPRS preferntial channel, after EDGE
subscribers on other channel are released, the system will try to move
Description
EDGE subscribers out of the GPRS oreferential channel.
Instance
Cell
0..100
Unit
Default Value
Default Value
It is recommended not to adjust the default
value but set it as 0 (that is, this parameter is invalid).
It is recommended not to adjust the value but
set it as 0 (that is, this parameter is invalid).
Change Mode
Offline
Related features
Related Parameters
AllowPsMove
PDCHPrecedence
SfPreferBusyThs
This parameter, which should be used with the
Relationship
parameter SfPreferBusyThs, is valid until the AllowPsMove switch is

enabled.
Related Interfaces
Um
2-1529
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35.6 Use parameter of 'EGPRS Prior to GPRS' in Cell

Full Name
Use parameter of 'EGPRS Prior to GPRS' in Cell
Abbreviation
UseCellEGPRSPriPara
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to use the parameter of 'EGPRS
Prior to GPRS' in the cell. When the EGPRS prior to GPRS function is
enabled and this parameter is set to Yes, the cell-level allocating weights
of EGPRS parameter is used.
The number of blocks allocated to EGPRS and GPRS are adjusted
Description
according to a certain ratio.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
decide by fact on demand

If it is necessary to set customized parameters
for the cell, set this parameter to 1; if the BSC-level parameters
are used rather than the customized parameters, set this parameter
to 0.
Change Mode
Offline
Related features
N/A
2-1530
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
This parameter is valid until the Info_4_6
Relationship
parameter is enabled; The Info1_7_6 parameter is valid until the

Info_4_6
parameter and this parameter are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.35.7 Allocating weights of EGPRS

Full Name
Allocating weights of EGPRS
Abbreviation
EGPRSAllocW
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the allocating weight of EGPRS for cell. When
the EGPRS prior to GPRS function is enabled and the cell uses the
EGPRS prior to GPRS parameter, the cell-level allocating weight of
EGPRS parameter is used. The number of blocks allocated to EGPRS
and GPRS are adjusted according to a certain ratio.
If the value is 0, the cell EGPRS service fails to get blocks. If the value is
Description
100, the cell GPRS service fails to get blocks.
Instance
Cell
0..100
Unit
N/A
Default Value
70
Default Value
consider speed of EDGE and GPRS in Cell
2-1531
SJ-20130408140048-016|2013-07-17(R1.0)
If it is necessary to set the customized parameters

for the cell, enable the setting of cell-level customized parameters.When
EDGE and GPRS share the same channel, this parameter value is larger,
the EDGE user gets more radio blocks and the EDGE service rate is
higher. The smaller this parameter value is, the less radio blocks
the EDGE user gets, and the lower the EDGE service rate is. This
parameter
acts on the dynamic and static data service channels.
Change Mode
Offline
Related features
N/A
Related Parameters
UseCellEGPRSPriPara
Relationship
This parameter takes effect until the parameters

Info_4_6 and Info1_7_5 are enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.36 NACC Configuration (GNACC)

2.36.1 NACC Configuration ID
Full Name
NACC Configuration ID
Abbreviation
GNACC
Managed Object
NACC Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
NACC Configuration ID
Instance
None
2-1532
SJ-20130408140048-016|2013-07-17(R1.0)
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->NACC Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.36.2 CCN mode support

Full Name
CCN mode support
Abbreviation
ccnActive
Managed Object
NACC Configuration
3GPP Name
CCN_ACTIVE
3GPP Reference
3GPP TS 44.060
2-1533
SJ-20130408140048-016|2013-07-17(R1.0)
Through the CCN_ACTIVE parameter carried in GPRS Cell Options IE

of SI13 on BCCH, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM adjacent cell. The
CCN mode refers to that the reselection requirement is notified to the
network side through the PACKET CELL CHANGE NOTIFICATION
message when the MS determines to perform cell reselection.
When the CCN_ACTIVE parameter is not carried in the GPRS Cell
Options IE or it is disabled, the MS will not enter the CCN mode. When
the CCN_ACTIVE parameter of the local cell is enabled, and the MS
determines to perform reselecteion to other GSM adjacent cell, user
should also check whether the CCN_SUPPORTED parameter of the
adjacent cell exists. If it does not exist, the MS is supposed to enable the
CCN mode towards all adjacent cells. If it exists, set the CCN mode as
disabled, then the MS cannot enter the mode. If the CCN_SUPPORTED
parameter exists, set the CCN mode as enabled, then the MS can
enter the mode.
Through the PACKET MEASUREMENT ORDER message the
network side can indicate the MS whether to enable the CCN_ACTIVE
parameter in the serving cell. It, through the PACKET CELLl CHANGE
ORDER or PS HANDOVER COMMAND message to indicate the MS
whether to enable the CCN_ACTIVE parameter in the target cell. The
setting of the CCN_ACTIVE parameter of the message on the PACCH
channel takes priority over that of the CCN_ACTIVE parameter in the
broadcast system message. The MS only uses the CCN mode under
Description
the NC0 and NC1 modes.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Enabling of the function helps reduce the interval of cell reselection, and
reduce the impact on PS implemented.

If the function is enabled, it helps reduce

the interval of cell reselection and brings less impact on the current
packet services. Therefore, it is recommended to enable the function.
Change Mode
Offline
Related features
Related Parameters
NACCSupport
CCNActive
SIStatusInd
2-1534
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
NACC should be enabled simultaneously with CCNActive/SIStatusInd/CCNSupport.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
Update
2.36.3 Cell support system message status flow

Full Name
Cell support system message status flow
Abbreviation
siStatusInd
Managed Object
NACC Configuration
3GPP Name
SI_STATUS_IND
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the cell supports the system message
status flow. It is broadcast to the MS through SI13 and PSI13, describing
whether the network supports Packet SI Status flow. Through sending the
Packet SI Status message on PACCH, the MS notifies the current receving status of the SI message saved to the network side. Upon receiving
the Packet SI Status message, the network side sends the SI message
required by the MS through the Packet Serving Cell Data message in accordance with the SI receiving indication carried in the message. In the
process of network supporting cell reselection, when the MS in the old
cell receives the desired system message of the new cell and gains an
access to the new cell, if the new cell supports the Packet SI Status flow,
the MS obtains the system message of the new cell in accordance with
Description
the above procedures.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
2-1535
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Enabling of the function helps restore services immediately after
reselection to a new cell.

If the function is enabled, it helps restore

services as soon as possible after the MS reselects to a new cell.
Therefore, it is recommended to enable the function.
Change Mode
Offline
Related features
Related Parameters
NACCSupport
CCNSupport
CCNActive
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
Update
2.36.4 3G NACC support

Full Name
3G NACC support
Abbreviation
support3GCCN
Managed Object
NACC Configuration
3GPP Name
3G_CCN_ACTIVE
3GPP Reference
3GPP TS 44.060
The network uses the parameter 3G_CCN_ACTIVE on the BCCH
(SI2quater) to indicate the cell whether CCN is enabled for cell reselection
towards 3G cells.If 3G_CCN_ACTIVE is not provided or it indicates that
CCN is disabled in the cell, the mobile stations shall not follow the CCN
procedures towards 3G cells. 3G_CCN_ACTIVE can also be individually
sent to the mobile station in either a PACKET MEASUREMENT ORDER
or a PACKET CELL CHANGE ORDER message. In the latter case, the
Description
setting applies in the target cell.

2-1536
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value

Enabling of the functiion is subject to the actual condition during 2/3G

operations. The function is applied when the MS needs to be reselected
to a 3G cell and enter CCN mode.
This function can be enabled according to the
inter-operation of 2/3G. If you prefer the MS to perform reselection
towards 3G cells when it enters CCN mode, use this function.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
Update
2.37 NC2 Configuration (GCellPsNc2)

2.37.1 NC2 Configuration ID
Full Name
NC2 Configuration ID
Abbreviation
GCellPsNc2
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1537
SJ-20130408140048-016|2013-07-17(R1.0)
Description
NC2 Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->NC2 Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.2 Cell reselection offset in idle

Full Name
Cell reselection offset in idle
Abbreviation
reselOff1
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1538
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used at the MS side. It is broadcast to MS via system

message by BTS. In the GPRS system, C32 is used as the standard
for cell reselection. Similar to the C2 standard in GSM, there is a
cell reselection offset parameter (ReselOff) for calculation of the C32
standard. When the offset represented by this parameter is 0dB, it need
not be indicated in the packet system message.
Description
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
This parameter is related to PBCCH. It is recommended
not to adjust the value.
Change Mode
Offline
Related features
ZGO-02-02-009 Support of C31 and C32 Criteria
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.3 Cell reselection temporary offset in idle

Full Name
Cell reselection temporary offset in idle
Abbreviation
tempOffset1
Managed Object
NC2 Configuration
3GPP Name
2-1539
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter used at the MS side. It is broadcast to the MS via system
message by BTS. In the GPRS system, C32 is used as the standard for
cell reselection. Similar to the C2 standard in GSM, there is a temporary
offset parameter TempOffset for calculation of the C32 standard and it
provides the C32 standard with a negative offset.
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.4 Penalty time of cell reselection in idle

Full Name
Penalty time of cell reselection in idle
Abbreviation
penalTime1
Managed Object
NC2 Configuration
2-1540
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
3GPP TS 45.008
This parameter is used at the MS side. It is broadcast to the MS via
system message by BTS. In the GPRS system, C32 is used as the
standard for cell reselection. There is a temporary offset in C32 that
provides a negative offset, similar to C2 in GSM system. The effective
time depends on the PENAL TIME parameter of cell reselection.
Description
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.5 Interval of reselecting the same cell in idle

Full Name
Interval of reselecting the same cell in idle
Abbreviation
t_Resel1
2-1541
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
NC2 Configuration
3GPP Name
T_RESEL
3GPP Reference
3GPP TS 44.060
system message by BTS. When the MS performs a cell reselection
that causes abnormal release of this cell, it is not allowed to reselect
this cell again within the T_RESEL period, unless there is no other
cells for selection. When the time represented by this parameter is the
default value (5s), it does not need to be broadcast to the MS in the
PSI3 message.
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1542
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.6 Threshold of HSC signal level in idle

Full Name
Threshold of HSC signal level in idle
Abbreviation
hcs_Thr1
Managed Object
NC2 Configuration
3GPP Name
HCS_THR
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It belongs to HCS parameter,
which is broadcast to the MS via system message by BTS, to indicate
the HCS signal strength threshold of the cell.
Description
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1543
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.7 HCS Priority in idle

Full Name
HCS Priority in idle
Abbreviation
prioClass1
Managed Object
NC2 Configuration
3GPP Name
PRIORITY_CLASS
3GPP Reference
3GPP TS 44.060
which is broadcast to the MS via system message by BTS, to specify
the HCS priority of the cell.
Description
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1544
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.8 C31 hysteresis in idle

Full Name
C31 hysteresis in idle
Abbreviation
c31_Hyst1
Managed Object
NC2 Configuration
3GPP Name
C31_HYST
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is broadcast to the MS
through system message by BTS, to indicate if CellReselHys parameter
functions on C31 standard.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1545
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.9 GPRS cell reselection hysteresis in idle

Full Name
GPRS cell reselection hysteresis in idle
Abbreviation
reselHys1
Managed Object
NC2 Configuration
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
3GPP TS 44.060
system message by BTS.
When the MS performs GPRS cell reselection, if the source cell and
the target cell belong to different location areas, the MS must start a
location updating process after performing cell reselection. C32 values
obtained at the boundary for two adjacent cells are different because of
fading characteristic of radio channel, which causes the MS to select
cell frequently.
Although the interval of two cell reselections performed by the MS is not
less than 15 s, 15 s is too short for location updating. Consequently,
The signalling traffic of the network increases greatly, radio resources
cannot be used completely, and the accessibility is reduced due to the
MS cannot make a response to a paging during location updating.
In this case, The CELL RESELECTION HYSTERESIS parameter
is specified in the specification, to require that the MS initiates cell
reselection until the signal level of the adjacent cell (the location area
and the local cell are different) is greater than that of the local cell, and
the difference between them is greater than the value specified by the
CELL RESELECTION HYSTERESIS parameter.
When the traffic in one area is large with signalling traffic always
overloaded, it is recommended to increase the value of the CELL
RESELECTION HYSTERESIS parameter that belongs to different LAC
adjacent cells in this area.
If the overlapped coverage scope of adjacent cells that belong to
different location areas is large, it is recommended to increase the CELL
RESELECTION HYSTERESIS parameter value.
If the coverage at the boundary for adjacent cells that belong to different
location areas is poor (that is, a coverage gap occurs), or the boundary
is on the express way or at the area where there is less motion objects,
it is recommended to set the CELL RESELECTION HYSTERESIS
parameter value as 1 to 3 (that is, the hysteresis level is from 2 dB to 6
dB).
Description
Instance
Cell
2-1546
SJ-20130408140048-016|2013-07-17(R1.0)
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.10 Routing reselection hysteresis in idle

Full Name
Routing reselection hysteresis in idle
Abbreviation
raReselHys1
Managed Object
NC2 Configuration
3GPP Name
RA_RESELECT_HYSTERESIS
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is broadcast to the MS through
system message by BTS, to specify the extra hysteresis value used in
selecting a cell in another routing area when the MS is in STANDBY
or READY mode. When this parameter has the same value as
CellReselHys, it does not need to be broadcast in the PSI3 message.
Description
2-1547
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
environment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.11 Random access attempt permitted in idle

Full Name
Random access attempt permitted in idle
Abbreviation
radAcRetry1
Managed Object
NC2 Configuration
3GPP Name
None
3GPP Reference
N/A
2-1548
SJ-20130408140048-016|2013-07-17(R1.0)

system message by BTS, which indicates if the MS is allowed to attempt
to access another cell (if any).
If there is abnormal release in the packet transmission, the MS will
discard all running TBFs. If MS is allowed to access other cells, it should
perform abnormal cell reselection, and establish TBF after initializing
new cell. If there are other suitable cells, the MS cannot reselect the
original cell within T_RESEL seconds.
Description
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.12 Usage of cell reselection offset in idle

Full Name
Usage of cell reselection offset in idle
2-1549
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
c32_Qual1
Managed Object
NC2 Configuration
3GPP Name
C32_QUAL
3GPP Reference
3GPP TS 45.008
system message by BTS, which indicates to use the exceptional rule
when adopting ReselOff.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.13 GPRS access minimal signal level in idle

Full Name
GPRS access minimal signal level in idle
2-1550
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
rxLevAsMin1
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
This parameter is used at the MS side. It is informed to the MS on
PACCH.
It indicates the minimum receiving level for the MS to access the GPRS
system. To prevent the MS from accessing the system at a low receiving
signal level (usually, the poor communication quality cannot guarantee
normal communications after accessing) and from unreasonably wasting
radio sources of the network, it is stipulated in the GSM system that
the receiving level be more than a threshold level for MS to access the
network, that is, Min RxLev Needed (the minimum receiving level that
allows MS to access the cell).
In addition, it is also one of the standards for MS to make cell selection
and reselection (a parameter to calculate C31 and C32).
This parameter indicates the parameter used during reselection in
Description
transmission state.
Instance
Cell
0..63
Unit
N/A
Default Value
12
Default Value
environment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1551
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.14 HCS exist in idle

Full Name
HCS exist in idle
Abbreviation
hcs_Exist1
Managed Object
NC2 Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter is used at the MS side. This parameter belongs to
Hierarchical Cell Structure (HCS) and is broadcast to MS via system
message by BTS. This parameter indicates whether the HCS parameters
(PriorityClass and HCSTHr) exist in the cell. If the local cell does not use
HCS parameters, the HCS parameters of other cells will also be ignored,
that is, all the cells use the HCS signal strength threshold of infinity.
Description
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1552
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.15 GPRS MAX initial access signal level in idle

Full Name
GPRS MAX initial access signal level in idle
Abbreviation
msTxMaxCCH1
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
In the process of the MS communicating with the BTS, the MS' power is
controlled by the networkl through a power command. That is, the MS
must output power in accordance with the transmission power specified
by the network. If the MS' power level cannot meet the requirement for
outputing the power value, it putputs the power approximately close
to the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, being involved in the calculation of C1 and C2.
If this parameter value is too large, the MS nearby the BTS will interfere
in the adjacent channel. If it is too small, the successful accessibility of
the MS on the cell edge will be low.
This parameter is set in accordance with the following: In case the
MS on the cell edge has certain successful accessibility, try to reduce
the MS' receiving level to a great extent. Obviously, the larger the cell
coverage is, the higher the MS' output power level. Generally, it is
recommended to set this parameter to 5 (corresponding to GSM900MS)
and 2 (corresponding to GSM1800MS).
In the actual application, user can determine to raise or lower this
parameter value through an experiment after this parameter is set.
That is, make a dial-up experiment on the cell edge, and test the MS'
successful accessibility and access time under different parameter
settings.
This parameter value is same as the appendix.
Description
Instance
Cell
2-1553
SJ-20130408140048-016|2013-07-17(R1.0)
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.16 Cell reselection offset in transfer

Full Name
Cell reselection offset in transfer
Abbreviation
reselOff2
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
Thia parameter is used at the MS side, informing the MS on PACCH.
In the GPRS system, C32 is used as the standard for cell reselection.
Similar to the C2 standard in GSM, there is a cell reselection offset
parameter (ReselOff) for calculation of the C32 standard. When the
offset represented by this parameter is 0 dB, it needs not be indicated in
the packet system message.
Description
transmission state.
2-1554
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.17 Cell reselection temporary offset in transfer

Full Name
Cell reselection temporary offset in transfer
Abbreviation
tempOffset2
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
2-1555
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used at the MS side, informing the MS on PACCH.

Similar to the C2 standard in GSM, there is a temporary offset parameter
TempOffset for calculation of the C32 standard and it provides the
C32 standard with a negative offset.
Description
transmission state.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.18 Penalty time of cell reselection in transfer

Full Name
Penalty time of cell reselection in transfer
Abbreviation
penalTime2
Managed Object
NC2 Configuration
3GPP Name
GPRS_PENALTY_TIME
2-1556
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter is used at the MS side, informing the MS on PACCH.
There is a temporary offset (TempOffset) in C32 that provides a negative
offset, similar to C2 in GSM system. The effective time depends on
Penalty Time of cell reselection.
Description
transmission state.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.19 Interval of reselecting the same cell in transfer

Full Name
Interval of reselecting the same cell in transfer
Abbreviation
t_Resel2
Managed Object
NC2 Configuration
2-1557
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
T_RESEL
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side, to inform the MS on PACCH.
When MS performs a cell reselection that causes abnormal release of
this cell, it is not allowed to reselect this cell again within the T_RESEL
period, unless there is no other cells for selection. When the time
represented by this parameter is the default value (5s), it does not need
to be broadcast to the MS in the PSI3 message.
Description
transmission state.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

The period of time indicated by this parameter
determines the period during which the MS is not allowed to re-select
this cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.20 Threshold of HSC signal level in transfer

Full Name
Threshold of HSC signal level in transfer

2-1558
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
hcs_Thr2
Managed Object
NC2 Configuration
3GPP Name
HCS_THR
3GPP Reference
3GPP TS 44.060
which is informed to MS on PACCH. It indicates the HCS signal strength
threshold of the cell.
Description
transmission state.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
to a cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1559
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.21 HCS Priority in transfer

Full Name
HCS Priority in transfer
Abbreviation
prioClass2
Managed Object
NC2 Configuration
3GPP Name
PRIORITY_CLASS
3GPP Reference
3GPP TS 44.060
which is informed to MS on PACCH, speciyings the HCS priority of the
cell.
Description
transmission state.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1560
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.22 C31 hysteresis in transfer

Full Name
C31 hysteresis in transfer
Abbreviation
c31_Hyst2
Managed Object
NC2 Configuration
3GPP Name
C31_HYST
3GPP Reference
3GPP TS 44.060
PACCH and specifies whether to use the parameter CellReselHys
on the C31 standard.
Description
transmission state.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
This is a NC2 reset parameter. Set the parameter
"Yes" to function the reset hysteresis with the C31 standard.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1561
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.23 GPRS cell reselection hysteresis in transfer

Full Name
GPRS cell reselection hysteresis in transfer
Abbreviation
reselHys2
Managed Object
NC2 Configuration
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is informedt to the MS on
PACCH.
When the MS performs GPRS cell reselection, if the source cell and
the target cell belong to different location areas, the MS must start a
location updating process after performing cell reselection. C32 values
obtained at the boundary for two adjacent cells are different because of
fading characteristic of radio channel, which causes the MS to select
cell frequently.
Although the interval of two cell reselections performed by the MS is not
less than 15 s, 15 s is too short for location updating. Consequently,
The signalling traffic of the network increases greatly, radio resources
cannot be used completely, and the accessibility is reduced due to the
MS cannot make a response to a paging during location updating.
In this case, The CELL RESELECTION HYSTERESIS parameter
is specified in the specification, to require that the MS initiates cell
reselection until the signal level of the adjacent cell (the location area
and the local cell are different) is greater than that of the local cell, and
the difference between them is greater than the value specified by the
CELL RESELECTION HYSTERESIS parameter.
When the traffic in one area is large with signalling traffic always
overloaded, it is recommended to increase the value of the CELL
RESELECTION HYSTERESIS parameter that belongs to different LAC
adjacent cells in this area.
If the overlapped coverage scope of adjacent cells that belong to
different location areas is large, it is recommended to increase the CELL
RESELECTION HYSTERESIS parameter value.
If the coverage at the boundary for adjacent cells that belong to different
location areas is poor (that is, a coverage gap occurs), or the boundary
is on the express way or at the area where there is less motion objects,
it is recommended to set the CELL RESELECTION HYSTERESIS
parameter value as 1 to 3 (that is, the hysteresis level is from 2 dB to 6
dB).
Description
PACCH.
Instance
Cell
2-1562
SJ-20130408140048-016|2013-07-17(R1.0)
0..7
Unit
N/A
Default Value
Default Value
environment.
When the rraffic in a certain area is large and the signalling traffic
is always overloaded, it is recommended to increase the CELL
RESELECTION PARAMETER of the adjacent cell of different LACs.
If the overlapped coverage scope of adjacent cells in different location

areas is large, it is recommended to increase the CELL RESELECTION

HYSTERESIS parameter.
If the coverage at the boundary of adjacent cells in different LAC is poor,
(that is, a coverage gap occurs), or the boundary is on the express way
where slow motion objects seldom exist, it is recommended to set the
CELL RESELECTION HYSTERESIS parameter value as 1 to 3 (that is,
the reselection hysteresis level is from 2 dB to 6 dB).
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.24 Routing reselection hysteresis in transfer

Full Name
Routing reselection hysteresis in transfer
Abbreviation
raReselHys2
Managed Object
NC2 Configuration
3GPP Name
RA_RESELECT_HYSTERESIS
2-1563
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 44.060
PACCH, specifying the extra hysteresis value used in selecting a cell
in another routing area when the MS is in STANDBY or READY mode.
When this parameter has the same value as CellReselHys, it does not
need to be broadcast in the PSI3 message.
Description
transmission state.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
environment.
When adjacent cells in different routing zone have a large overlapped
coverage area, increase the value of the cell re-selection parameters.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.25 Random access attempt permitted in transfer

Full Name
Random access attempt permitted in transfer
Abbreviation
radAcRetry2
Managed Object
NC2 Configuration
2-1564
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
None
3GPP Reference
N/A
PACCH, indicating whether the MS is allowed to attempt to access
another cell (if it exists).
If there is abnormal release in the packet transmission, the MS will
discard all running TBFs. If the MS is allowed to access other cells,
it should perform abnormal cell reselection, and establish TBF after
initializing a new cell. If there are other suitable cells, the MS cannot
reselect the original cell within T_RESEL seconds.
Description
transmission state.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
This parameter is relevant to PBCCH, and is
not recommended to be used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1565
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.26 Usage of cell reselection offset in transfer

Full Name
Usage of cell reselection offset in transfer
Abbreviation
c32_Qual2
Managed Object
NC2 Configuration
3GPP Name
C32_QUAL
3GPP Reference
3GPP TS 45.008
PACCH, specifying whether to use the exceptional rule for ReselOff.
Description
transmission state.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
This parameter only functions while configuring PBCCH, but PBCCH is
not configured by default

This parameter should be set on demand of user needs. If it is set "Yes",

ReselOff will be set with a suggested default value according to the rules
described in protocol 45008 10.1.3 Cell Re-selection Algorithm.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1566
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.27 GPRS access minimal signal level in transfer

Full Name
GPRS access minimal signal level in transfer
Abbreviation
rxLevAsMin2
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
PACCH.
It indicates the minimum receiving level for the MS to access the GPRS
system. To prevent the MS from accessing the system at a low receiving
signal level (usually, the poor communication quality cannot guarantee
normal communications after accessing) and from unreasonably wasting
radio sources of the network, it is stipulated in the GSM system that
the receiving level be more than a threshold level for MS to access the
network, that is, Min RxLev Needed (the minimum receiving level that
allows MS to access the cell).
In addition, it is also one of the standards for MS to make cell selection
and reselection (a parameter to calculate C31 and C32).
Description
transmission state.
Instance
Cell
0..63
Unit
N/A
Default Value
12
Default Value
environment.

This parameter is used for cell re-selection.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1567
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.28 HCS exist in transfer

Full Name
HCS exist in transfer
Abbreviation
hcs_Exist2
Managed Object
NC2 Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter is used at the MS side, belonging to Hierarchical Cell
Structure (HCS). It is informed to the MS on PACCH, to indicate whether
the HCS parameters (PriorityClass and HCSTHr) exist in the cell. If
the local cell does not use HCS parameters, the HCS parameters of
other cells will also be ignored, that is, all the cells use the HCS signal
strength threshold of infinity.
Description
transmission state.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1568
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.29 GPRS MAX initial access signal level in transfer

Full Name
GPRS MAX initial access signal level in transfer
Abbreviation
msTxMaxCCH2
Managed Object
NC2 Configuration
3GPP Name
3GPP Reference
3GPP TS 45.008
In the process of the MS communicating with the BTS, the MS' power is
controlled by the networkl through a power command. That is, the MS
must output power in accordance with the transmission power specified
by the network. If the MS' power level cannot meet the requirement for
outputing the power value, it putputs the power approximately close
to the transmission power.
This parameter is one of the parameters for the MS to perform cell
selection and reselection, being involved in the calculation of C1 and C2.
If this parameter value is too large, the MS nearby the BTS will interfere
in the adjacent channel. If it is too small, the successful accessibility of
the MS on the cell edge will be low.
This parameter is set in accordance with the following: In case the
MS on the cell edge has certain successful accessibility, try to reduce
the MS' receiving level to a great extent. Obviously, the larger the cell
coverage is, the higher the MS' output power level. Generally, it is
recommended to set this parameter to 5 (corresponding to GSM900MS)
and 2 (corresponding to GSM1800MS).
In the actual application, user can determine to raise or lower this
parameter value through an experiment after this parameter is set.
Description
That is, make a dial-up experiment on the cell edge, and test the MS'
2-1569
SJ-20130408140048-016|2013-07-17(R1.0)
successful accessibility and access time under different parameter

settings.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
environment.
The setting for this parameter should follow
this principle: guarantee a certain success rate of MS access at the
cell edge while decreasing the access level of MS as much as possible.
Obviously, the coverage area increases with the uplift of MS output

power. It is recommended to set this parameter 5 (for GSM900MS) and
2 (for GSM1800MS).
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.30 NC hold time in non-drx mode

Full Name
NC hold time in non-drx mode
Abbreviation
ncNoDrxPer
Managed Object
NC2 Configuration
3GPP Name
NC_ NON_DRX_PERIOD
2-1570
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It belongs to network control
survey parameter. It is broadcast to the MS through the SI2Quater
system message on BCCH when the network operates in NC1 or NC2
mode. On PACCH, this parameter can also be sent to a certain MS
through the PACKET MEASUREMENT ORDER or the PACKET CELL
Description
CHANGE ORDER message, functioning on the target cell.
Instance
Cell
0..7
Unit
Default Value
Default Value
compromise saving battery and cutting down the TBF establishment
period, the value is 0.48s.

In non-DRX mode, MS consumes more power. Therefore,
when DRX_Timer_Max is large, TBF establishment time can be reduced,
but the power consumption of MS increases. When the value is small,
the power of MS is saved, but the signalling load of the system increases
and data transmission delay increases because paging process is added
in DRX mode.
Change Mode
Offline
Related features
Related Parameters
CtrlOrder
Relationship
If NC1 or NC2 is enabled, this parameter is

valid.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1571
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.31 Packet idle mode

Full Name
Packet idle mode
Abbreviation
ncRepPerI
Managed Object
NC2 Configuration
3GPP Name
NC_REPORTING_PERIOD_I
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It belongs to network control survey parameter. When the network operates in NC1 or NC2 mode, It is
broadcast to the MS through the SI2Quater system message on BCCH,
indicating the period of reporting the cell reselection measurement report
when the MS is in dile mode. On PACCH, this parameter can also be
sent to a certain MS through the PACKET MEASUREMENT ORDER or
the PACKET CELL CHANGE ORDER message, functioning on the target
Description
cell.
Instance
Cell
0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
7: 61.44
Unit
Default Value
Default Value
NC2 function is not enabled currently, so it
is better not to adjust the value.
Change Mode
Offline
Related features
Related Parameters
CtrlOrder
Relationship

valid.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1572
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.32 Packet transmission mode

Full Name
Packet transmission mode
Abbreviation
ncRerPerT
Managed Object
NC2 Configuration
3GPP Name
NC_REPORTING_PERIOD_T
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It belongs to network control survey parameter. When the network operates in NC1 or NC2 mode, It is
broadcast to the MS through the SI2Quater system message on BCCH,
indicating the period of reporting the cell reselection measurement report
when the MS is in packet transmission mode. When ETWORK_CONTROL_ORDER is 0, this parameter may not be broadcast in the PSI5
message. On PACCH, this parameter can also be sent to a certain MS
through the PACKET MEASUREMENT ORDER or the PACKET CELL
Description
CHANGE ORDER message, functioning on the target cell.
Instance
Cell
0: 0.48
1: 0.96
2: 1.92
3: 3.84
4: 7.68
5: 15.36
6: 30.72
7: 61.44
Unit
Default Value
Default Value
2-1573
SJ-20130408140048-016|2013-07-17(R1.0)
the lower the value is, the more frequently

the measurement reported, and the more accuracy of measurement

calculation
and cell reselection, but the more the signalling load is.Set the
value in accordance with the actual network load.
Change Mode
Offline
Related features
Related Parameters
CtrlOrder
Relationship

valid.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.33 Extended measurement report order

Full Name
Extended measurement report order
Abbreviation
exMeaOrder
Managed Object
NC2 Configuration
3GPP Name
EXT_MEASUREMENT_ORDER
3GPP Reference
3GPP TS 44.060 V5.19.0

This parameter is used at the MS side. It belongs to the extended
measurement parameters, and
is broadcast to the MS in the PSI5 message, indicating whether the
MS can perform extended measurement, and how to inrerpret the
left extended measurement parameters (such as ExtRepType, and
ExtRepPer) . This parameter value is as follows:
EMO: The MS should not perform extended measurement
EM1: The MS should send the extended measurement report to the
Description
network
Instance
Cell
2-1574
SJ-20130408140048-016|2013-07-17(R1.0)
0..1
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.34 Type of extended measurement report

Full Name
Type of extended measurement report
Abbreviation
extRepType
Managed Object
NC2 Configuration
3GPP Name
EXT_REPORTING_TYPE
3GPP Reference
3GPP TS 44.060 V5.19.0
2-1575
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used at the MS side. It belongs

to the extended survey parameters, and is broadcast to the MS in
the PSI5 message on PBCCH, indicating the type of the extended
survey report
of MS. The system sends the parameter information through the PSI5
message
when the extended measurement report order is EM1.
Type I: This type of report must be extended if the frequency
points for the extended survey are among the six strongest carrier
frequencies, even if the BSIC decoding is successful. The report should
cover the receiving signal level and the successfully decoded BSIC
(if any);
Type2: This type of report must be extended if all the frequency
points for the extended survey are located in the six strongest carrier
frequencies, the BSIC decoding is successful and the NCC part is
allowed
for survey. The report should cover the receiving signal level and
the successfully decoded BSIC.
Type3: Use this type of report to report all the frequency
points for the extended survey. No BSIC decoding is necessary. The
report should contain the receiving signal level. Besides, the interference
Description
of each carrier frequency shall be reported.
Instance
Cell
0..2
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1576
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.35 Report period of extended measurement

Full Name
Report period of extended measurement
Abbreviation
extRepPer
Managed Object
NC2 Configuration
3GPP Name
EXT_REPORTING_PERIOD
3GPP Reference
3GPP TS 44.060 V5.19.0

This parameter is used at the MS side.
It belongs to the extended survey parameters and is broadcast to
the MS in the PSI5 message on PBCCH, indicating the interval of
extended survey
report. The system sends the parameter information through the PSI5
Description
message when the extended measurement report order is EM1.
Instance
Cell
0: 60
1: 120
2: 240
3: 480
4: 960
5: 1920
6: 3840
7: 7680
Unit
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1577
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.36 The size of test report's slip window

Full Name
The size of test report's slip window
Abbreviation
wnd
Managed Object
NC2 Configuration
3GPP Name
None
3GPP Reference
N/A
When NC2 network controls the cell reselection, this parameter is used.
When the number of measurement reports reaches this parameter setting
Description
value, average processing is done for measurement report.
Instance
Cell
1..8
Unit
N/A
Default Value
Default Value
Considering the functional effects and implementation

The smaller the window size is, the greater
the random interference is. If the window size is too large, the
real-time-change
of radio signal cannot be reflected.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1578
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.37 Minimum measurement reports in slip window to avoid

penalty
Full Name
Minimum measurement reports in slip window to avoid penalty
Abbreviation
allowedRepNum
Managed Object
NC2 Configuration
3GPP Name
None
3GPP Reference
N/A
When NC2 network controls the cell reselection, this parameter is used.
When the adjacent cell receives the average level, and the number of valid
measurement reports received in slip window is lower than the setting
Description
value, this calculation shall be punished.
Instance
Cell
1..6
Unit
N/A
Default Value
Default Value
Considering the functional effects and implementation

The larger this parameter value is, the more
is the number of penalties performed by the adjacent cell, the higher
the reselection threshold is. In that case, the network is unable
to notify the MS of reselection, which may lead to TBF failure occurs.

The smaller the parameter value is, the lower the reselection threshold
is, which may cause frequent reselection.
Change Mode
Offline
Related features
N/A
2-1579
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.38 Enable uplink interference decision in NC2

Full Name
Enable uplink interference decision in NC2
Abbreviation
nc2UlInterControl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable
uplink interference decision in NC2.
0: Disabled
Description
1: Enabled
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Based on the signal strength, enable this function if quality is expected
to be taken into consideration during decision.
Change Mode
Offline
Related features
N/A
Related Parameters
CtrlOrder
2-1580
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.39 Enable downlink interference decision in NC2

Full Name
Enable downlink interference decision in NC2
Abbreviation
nc2DlInterControl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable
downlink interference decision in NC2.
0: Disabled
Description
1: Enabled
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Based on the signal strength, enable this function if quality is expected
to be taken into consideration during decision.
Change Mode
Offline
Related features
N/A
Related Parameters
CtrlOrder
Relationship
N/A
2-1581
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.40 P of uplink interference decision in NC2

Full Name
P of uplink interference decision in NC2
Abbreviation
nc2UlLevP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the P value of uplink
interference decision. Uplink interference is made if more than P out of
N AvRxQualUL value satify AvRxQualULs<InterfFQSS(s). Where,
AvRxQualUL(s) is the average uplink bit error rate (MEAN_BEP),
and InterfFQSS(s) is the bit error rate threshold FQSS calculated by
Description
AvRxLevUL(s).
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
The purpose is to ensure that the decisions can be made quickly and
correctly.

A greater value indicates more accurate reselection decision and worse

real-time performance. A lower value indicates reduced reselection
decision accuracy and improved real-time performance.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
2-1582
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.41 N of uplink interference decision in NC2

Full Name
N of uplink interference decision in NC2
Abbreviation
nc2UlLevN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the P value of uplink
interference decision. Uplink interference is made if more than P out of
N AvRxQualUL value satify AvRxQualULs<InterfFQSS(s). Where,
and InterfFQSS(s) is the bit error rate threshold FQSS calculated by
Description
AvRxLevUL(s).
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
This parameter is recommended to be set to ensure correct and fast
decision.


Change Mode
Offline
Related features
N/A
2-1583
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.42 P of downlink interference decision in NC2

Full Name
P of downlink interference decision in NC2
Abbreviation
nc2DlLevP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the P value of downlink
interference decision. Downlink interference is made if more than P
out of N AvRxQualUL value satify AvRxQualDLs<InterfFQSS(s).
Where, AvRxQualDL(s is the average downlink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold FQSS
Description
calculated by AvRxLevDL(s) (that is, C value).
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
The purpose is to ensure that the decisions can be made quickly and
correctly.

Change Mode

Offline
2-1584
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.43 N of downlink interference decision in NC2

Full Name
N of downlink interference decision in NC2
Abbreviation
nc2DlLevN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the N value of downlink
interference decision. Downlink interference is made if more than P
out of N AvRxQualUL value satify AvRxQualDLs<InterfFQSS(s).
Where, AvRxQualDL(s is the average downlink bit error rate
(MEAN_BEP), and InterfFQSS(s) is the bit error rate threshold FQSS
Description
calculated by AvRxLevDL(s) (that is, C value).
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
This parameter is recommended to be set to ensure correct and fast
decision.


2-1585
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
qoffSetUl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
For uplink interferencethe formula of FQSS is as shown in .
XOffset and YOffset mean SOffSetUl and QOffSetUl.
This parameter is used to check the relation between level and quality to
judge whether there is any interference in service
judgment channel when handover occurs in the cell.
rxqual-ul QoffSetUl + FQSS (RXLEV_UL+SOffSetUl) or rxqual-dl
QOffSetDl + FQSS (RXLEV_DL+SoffSetDl). Where, rxqual-xx is
uplink/downlink quality, QoffSetxx is uplink/downlink quality offset,
RXLEV_XX is uplink/downlink level, SoffSetxx is uplink/downlink level
offset.
After interference is confirmed, when service party requests channel
from database, which shall tell original occupation condition of database,
Description
then the database selects proper channels based on this information.
Instance
Cell
2-1586
SJ-20130408140048-016|2013-07-17(R1.0)
0: -8 dB
1: -7 dB
2: -6 dB
3: -5 dB
4: -4 dB
5: -3 dB
6: -2 dB
7: -1 dB
8: 0 dB
9: 1 dB
10: 2 dB
11: 3 dB
12: 4 dB
13: 5 dB
14: 6 dB
15: 7 dB
16: 8 dB
Unit
dB
Default Value
Default Value


Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1587
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
soffSetUl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
For uplink interferencethe formula of FQSS is as shown in .
XOffset and YOffset mean SOffSetUl and QOffSetUl.
This parameter is used to check the relation between level and quality
to judge whether there is any interference in service judgment channel
when handover occurs in the cell.
offset.
Description
Instance
Cell
0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
20: 10 dB
2-1588
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
dB
Default Value
10
Default Value



network
situation.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
qoffSetDl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1589
SJ-20130408140048-016|2013-07-17(R1.0)
Downlink interference, the formula of FQSS is shown in .

XOffset and YOffset mean SOffSetDl and QOffSetDl.
This parameter is used to check the relation between level and quality to
judge whether there is any interference in service
judgment channel when handover occurs in the cell.
offset.
Description
Instance
Cell
0: -8 dB
1: -7 dB
2: -6 dB
3: -5 dB
4: -4 dB
5: -3 dB
6: -2 dB
7: -1 dB
8: 0 dB
9: 1 dB
10: 2 dB
11: 3 dB
12: 4 dB
13: 5 dB
14: 6 dB
15: 7 dB
16: 8 dB
Unit
dB
Default Value
Default Value


Change Mode
Offline
Related features
N/A
2-1590
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
soffSetDl
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Downlink interference, the formula of FQSS is shown in .
XOffset and YOffset mean SOffSetDl and QOffSetDl.
This parameter is used to check the relation between level and quality
to judge whether there is any interference in service judgment channel
when handover occurs in the cell.
offset.
Description
Instance
Cell
2-1591
SJ-20130408140048-016|2013-07-17(R1.0)
0: -10 dB
1: -9 dB
2: -8 dB
3: -7 dB
4: -6 dB
5: -5 dB
6: -4 dB
7: -3 dB
8: -2 dB
9: -1 dB
10: 0 dB
11: 1 dB
12: 2 dB
13: 3 dB
14: 4 dB
15: 5 dB
16: 6 dB
17: 7 dB
18: 8 dB
19: 9 dB
20: 10 dB
Unit
dB
Default Value
10
Default Value



network
situation.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1592
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.48 Num of samples that calculates average of uplink signal

level in NC2
Full Name
Num of samples that calculates average of uplink signal level in NC2
Abbreviation
nc2UlLevWindow
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the number of samples used to calculate the
Description
average value of uplink signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
12
Default Value
Sufficient samples should be provided to ensure that reselection

decisions are accurate and calls can initiate reselection as early as
possible when signal quality is bad.
If the parameter is set too low, few reselection decision samples can be

provided and thus the reselection decision is not accurate.

If the parameter is set too high, the reselection decision requires too
long time and thus call drops may occur because reselection cannot
be done in time.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1593
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.49 Num of samples that calculates average of downlink signal

level in NC2
Full Name
Num of samples that calculates average of downlink signal level in NC2
Abbreviation
nc2DlLevWidow
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
average value of downlink signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value



be done in time.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1594
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.50 Num of samples that calculates average of uplink quality

level in NC2
Full Name
Num of samples that calculates average of uplink quality level in NC2
Abbreviation
nc2UlQualWindow
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
average value of uplink signal quality.
Instance
Cell
1..31
Unit
N/A
Default Value
12
Default Value



be done in time.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1595
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.51 Num of samples that calculates average of downlink quality

level in NC2
Full Name
Num of samples that calculates average of downlink quality level in NC2
Abbreviation
nc2DlQualWindow
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
average value of downlink signal quality.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value



be done in time.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2DlInterControl
Relationship
N/A
Related Interfaces
N/A
2-1596
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.52 NC2 mode between 2G and 3G

Full Name
NC2 mode between 2G and 3G
Abbreviation
NC2For23G
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable the NC2 function between
2G and 3G. The value 0 indicates that the NC2 function is not enabled for
interoperation between 2G and 3G. The value 1 indicates that the NC2
function is enabled between 2G and 3G. For the reselection mode applied
between 2G and 3G, perform an OR operation according to this functional
switch and the NC2 functional switch of CtrlOrder. That is, when CtrlOrder
is configured to NC2, the NC2 mode is applied for 2G-2G and 2G-3G.
When CtrlOrder is configured to NC0 and NC2For23G is configured to 1,
the NC0 mode is applied for 2G-2G and the NC2 mode is applied for 2G
Description
and 3G. This functional switch is the subset of CtrlOrder.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Change Mode

be done in time.
Offline
2-1597
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.37.53 Serving Cell Load Threshold

Full Name
Serving Cell Load Threshold
Abbreviation
ServCellLoadThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates that the system triggers reselection for network
control when the load of a 2G cell exceeds a certain threshold. The load
Description
is calculated based on channel usage.
Instance
Cell
0..100
Unit
Default Value
70
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1598
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.37.54 Serving Cell Capacity Threshold

Full Name
Serving Cell Capacity Threshold
Abbreviation
ServCellCapaThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates that the system triggers reselection for network
control when the remaining access capacity of a 2G cell is lower than a
certain threshold. The remaining access capacity is the subtraction of the
Description
total capacity from the used capacity.
Instance
Cell
1..100
Unit
Default Value
30
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
2-1599
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.37.55
Full Name
Abbreviation
PsTrafResel
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to enable reselection for the PS
service of a cell. When this function is enabled, the system triggers
reselection for network control if the load of this cell exceeds the 2G
threshold. If this function is not enabled, the system does not reference
the load of this cell.
Description
0: This function is not enabled; 1: This function is enabled.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
To trigger reselection for network control
according to the congestion of a 2G cell, enable this switch.
Change Mode
Offline
Related features
N/A
2-1600
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.37.56 Is Dual-Frequency NC2 Support

Full Name
Is Dual-Frequency NC2 Support
Abbreviation
DualFreqNC2Sup
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to support dual-frequency NC2. Only
Description
the load-based NC2 is involved.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
A function required by China Mobile
2-1601
SJ-20130408140048-016|2013-07-17(R1.0)
For load-based Network Controlled Cell Reselection (NCCR), this

parameter is independent of other decisions on triggering conditions.
Specifically, this parameter is used to set a pair of dual-frequency NC2
related cells by using the neighbor cell parameter IsDualFreqRltCell (The

restrictions are: only one pair is allowed; the cells are mutually related;
the related cell must be located in the same module) when the load (in
uplink or downlink) in servicing cell A reaches the threshold defined by
DualCellPsChanThr and the load in related cell B of dual-frequency NC2
is lower than the threshold defined by the parameter DualCellPsChanThr.
Change Mode
Offline
Related features
N/A
Related Parameters
CtrlOrder
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.57 Dual-Frequency NC2 Parameter N

Full Name
Dual-Frequency NC2 Parameter N
Abbreviation
DualFreqNC2N
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter sets the N value for determining dual-frequency NC2
Description
based on level, quality, and TA.
Instance
Cell
1..10
Unit
N/A
Default Value
4
2-1602
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
To ensure correct and rapid reselections

A great value can eliminate the affects of signal fluctuation but may result

in hysteresis. A low value leads to quick decision but the correctness

cannot be guaranteed.
Note: This function is newly added to iBSC V6.20.713 and has only
experiment data.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.58 Dual-Frequency NC2 Parameter P

Full Name
Dual-Frequency NC2 Parameter P
Abbreviation
DualFreqNC2P
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
based on level, quality, and TA.
Instance
Cell
1..10
Unit
N/A
Default Value
This parameter sets the P value for determining dual-frequency NC2
2-1603
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
To ensure correct and rapid reselection

A great value can eliminate the affects of signal fluctuation but may result

in hysteresis. A low value leads to quick decision but the correctness

cannot be guaranteed.
Note: This function is newly added to iBSC V6.20.713 and has only
experiment data.
Change Mode
Offline
Related features
N/A
Related Parameters
nc2UlInterControl
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.59 Dual-Frequency NC2 TA Threshold

Full Name
Dual-Frequency NC2 TA Threshold
Abbreviation
DualFreqNC2TAThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
used in TA-based reselection algorithms.
Instance
Cell
0..63
Unit
N/A
Default Value
63
This parameter sets the dual-frequency NC2 TA decision threshold. It is
2-1604
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
This parameter ensures that the reselection can be implemented
accurately and efficiently.

If the serving cell TA is larger than the threshold, the TA-based Network
Controlled Cell Reselection (NCCR) decision is triggered.
It is recommended to set the threshold to a large value, which helps
avoid unnecessary TA-based forced NCCR.
If the threshold is set to a small value, unnecessary TA-based forced

NCCR may occur, which will result in incorrect cell reselection.
It is a newly added function for iBSC(V6.20.713), and has not been
applied in practical applications.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.60 Dual-Frequency NC2 load Threshold

Full Name
Dual-Frequency NC2 load Threshold
Abbreviation
DualCellPsChanThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1605
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the dual-frequency load-based NC2 decision

threshold. The load-based NC2 decision is triggered when the following
conditions are satisfied:
The uplink/downlink load of serving cell A reaches the threshold defined
by the DualCellPsChanThr parameter of A.
The uplink and downlink load of the dual-frequency NC2 associated
cell B is lower than the threshold defined by the DualCellPsChanThr
paraemeter of B.
The level of cell B satisfies the minimum access level (C1>0).
This parameter helps distinguish whether uplink services or downlink
services occupy TBFs. The decision formula is as follows: PS uplink
Description
NC2 busyness = 100 all occupied TBFs
Instance
Cell
0..100
Unit
Default Value
80
Default Value

If the threshold is set to a large value, it will cause the load-based NC2
decision unabled to be implemented in a timely manner, but it can help
avoid unncessary load-based NC2.
If the threshold is set to a small value, it will cause the load-based NC2
decision to be implemented too early, and it will cause unnecessary

load-based NC2.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1606
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.61 NC2 UL RxLevel Threshold

Full Name
NC2 UL RxLevel Threshold
Abbreviation
ULRxLevThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 uplink level decision threshold. It is
Description
used in uplink-level-based reselection algorithms.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value

If the uplink level of the serving cell is smaller than the threshold, the
Network Controlled Cell Reselection (NCCR) decision based on uplink
level is triggered.

It is recommended to set the threshold to a small value, which helps

avoid unnecessary uplink-level-based NCCR.
If the threshold is set to a large value, unnecessary uplink-level-based
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1607
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.62 NC2 DL RxLevel Threshold

Full Name
NC2 DL RxLevel Threshold
Abbreviation
DLRxLevThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 downlink level decision threshold. It
Description
is used in downlink-level-based reselection algorithms.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value

If the downlink level of the serving cell is smaller than the threshold,
the Network Controlled Cell Reselection (NCCR) decision based on
downlink level is triggered.

It is recommended to set the threshold to a small value, which helps

avoid unnecessary downlink-level-based NCCR.
If the threshold is set to a large value, unnecessary downlink-level-based
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1608
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.63 NC2 UL RxQual Threshold

Full Name
NC2 UL RxQual Threshold
Abbreviation
ULRxQualThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 uplink quality decision threshold. It is
Description
used in uplink-quality-based reselection algorithms.
Instance
Cell
0..31
Unit
N/A
Default Value
15
Default Value

If the value of the uplink MEAN_BEP of the serving cell is lower than this
threshold, the uplink-quality-based cell reselection is triggered.
Unnecessary uplink-quality-based cell reselection can be avoided by

setting this parameter to a low value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1609
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.64 NC2 DL RxQual Threshold

Full Name
NC2 DL RxQual Threshold
Abbreviation
DLRxQualThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 downlink quality decision threshold.
Description
It is used in downlink-quality-based reselection algorithms.
Instance
Cell
0..31
Unit
N/A
Default Value
15
Default Value

If the value of the downlink MEAN_BEP of the serving cell is lower than
this threshold, the downlink-quality-based cell reselection is triggered.
Unnecessary downlink-quality-based cell reselection can be avoided by

setting this parameter to a low value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1610
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.65 avoid Ping-Pang cell reselection Timer

Full Name
avoid Ping-Pang cell reselection Timer
Abbreviation
TPingPang
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter is the timer for avoiding ping-pong in cell reselection. After
a mobile phone reselects a cell, it cannot return to the original cell before
Description
the timer expires.
Instance
Cell
0..65535
Unit
Default Value
100
Default Value
This parameter helps avoid ping-pong in cell reselection, and ensures
good service performance and efficient resource utilization.

If this parameter is set to a large value, it may cause the Network
Controlled Cell Reselection (NCCR) unable to be implemented in a
timely manner, and it also affects performance indexes such as speed
and TBF occupation failure rate.

If this parameter is set to a small value, it may cause ping-pong

network-controlled cell reselection.
If Network Controlled Cell Reselection (NCCR) is enabled, it is
recommended to set this parameter to 10 s.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1611
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.66 NC2 Reselection hysteresis Threshold

Full Name
NC2 Reselection hysteresis Threshold
Abbreviation
NC2ResHys
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 reselection hysteresis level. It helps
Description
reselect a better cell.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
This parameter ensures that the reselection based on better neighbor
cell can be implemented accurately and efficiently.

The priority of NCCR based on better neighbor cell is higher than
that of NCCR based on level. If the serving cell level is between the
NC2ResThr parameter value and the DLRxLevThr parameter value, and
if the result of subtracting the service cell C2 from the neighbor cell C2

is larger than the NC2ResHys parameter value, the NCCR based on

better neighbor cell can be triggered.
If this parameter is set to a large value, it helps avoid ping-pong NCCR,
but it may cause NCCR based on better neighbor cell unable to be
implemented in a timely manner.
If this parameter is set to a small value, it helps implement NCCR based
on better neighbor cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1612
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.67 NC2 reselection DL RxLevel Threshold

Full Name
NC2 reselection DL RxLevel Threshold
Abbreviation
NC2ResThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the NC2 reselection downlink level threshold.
Description
It helps reselect a better neighbor cell.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value
This parameter ensures that the reselection based on better neighbor
cell can be implemented accurately and efficiently.

The priority of NCCR based on better neighbor cell is higher than
that of NCCR based on level. If the serving cell level is between the
NC2ResThr parameter value and the DLRxLevThr parameter value, and
if the result of subtracting the service cell C2 from the neighbor cell C2

is larger than the NC2ResHys parameter value, the NCCR based on

better neighbor cell can be triggered.
If this parameter is set to a large value, the range of NCCR based on
better neighbor cell is enlarged, which helps trigger NCCR towards cells
with better C2.
If this parameter is set to a small value, it helps limit the number of
unnecessary cells when the C2 value is large.
2-1613
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.68 NC2 Distance Windows

Full Name
NC2 Distance Windows
Abbreviation
NC2DistanceWindow
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Sets the window size of NC2 based on TA.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
None
If the parameter value is set higher, more measurement reports are
needed for an average distance calculation, which avoids the impact of
signal influatuation. However, a high parameter value is likely to delay

the calculation.
Change Mode
Offline
Related features
N/A
2-1614
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.69 Downlink RxQual N Value

Full Name
Downlink RxQual N Value
Abbreviation
DLRxQualN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers downlink quality reselection when P of N measured
Description
downlink quality meets the downlink quality threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
Set according to normal cases

The smaller the value, the more timely the measurement report
determination, the more sensitive the reselection and the greater the
impact brought by instantaneous fluctuation.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1615
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.70 Downlink RxQual Criteria

Full Name
Downlink RxQual Criteria
Abbreviation
NC2RxQualDLCriteria
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on downlink quality criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1616
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.71 Downlink RxLev P Value

Full Name
Downlink RxLev P Value
Abbreviation
DLRxLevP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
levels meets the downlink level threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
The system triggers uplink level reselection when P of N measured downlink
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1617
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.72 Downlink RxLev N Value

Full Name
Downlink RxLev N Value
Abbreviation
DLRxLevN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers uplink level reselection when P of N measured downlink
Description
levels meets the downlink level threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1618
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.73 Downlink RxLev Criteria

Full Name
Downlink RxLev Criteria
Abbreviation
NC2RxlevDLCriteria
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on downlink level criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1619
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.74 Distance P Value

Full Name
Distance P Value
Abbreviation
DistanceP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers distance reselection when P of N measured distances
Description
meets the distance threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.75 Distance N Value

Full Name
Distance N Value
2-1620
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
DistanceN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers distance reselection when P of N measured distances
Description
meets the distance threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.76 Distance Criteria

Full Name
Distance Criteria
Abbreviation
DistanceCriteria
Managed Object
NC2 Configuration
2-1621
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on distance criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.77 Cell reselection by traffic

Full Name
cell reselection by traffic
Abbreviation
CellReselByTraffic
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Cell reselection by traffic
Instance
Cell
2-1622
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.78 Cell change failure penalty time

Full Name
Cell change failure penalty time
Abbreviation
TCellChangeFailPenal
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
When cell reselection fails, a penalty is made for the whole target cell with
the failure cause of cell congestion. During the penalty period, MSs are
forbidden to use the target cell. If the failure is not caused by cell congestion,
a neighbor cell penalty is made during the penalty period according to the
Description
failure times and penalty offset.
Instance
Cell
1..100
2-1623
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.79 Cell change failure penalty level offset

Full Name
cell change failure penalty level offset
Abbreviation
PenalLevOffset
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
When the target cell fails to be reselected and makes another attempt, the
penalty offset "PenalLevOffset" is deducted during PBGT calculation if the
cell priorities are the same. If the cell is still ranked first, another attempt
is made. When an offset penalty is made for the target cell and meanwhile
the "NTCellChangeFailPenal" counter is enabled and set to 1, the counter
increases by 1 and the offset level increases by the value of "PenalLevOffset" in case of another failure. When the failure times reach the maximum
value 3 but the cell is in the penalty period ("TcellChangeFailPenal"), the
Description
cell is filtered and no attempt is made to the cell.

2-1624
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.80 Uplink RxQual P Value

Full Name
Uplink RxQual P Value
Abbreviation
ULRxQualP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers uplink quality reselection when P of N measured uplink
Description
quality meets the uplink quality threshold.
Instance
Cell
1..31
Unit
N/A
2-1625
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.81 Uplink RxQual N Value

Full Name
Uplink RxQual N Value
Abbreviation
ULRxQualN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers uplink quality reselection when P of N measured uplink
Description
quality meets the uplink quality threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

2-1626
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.82 Uplink RxQual Criteria

Full Name
Uplink RxQual Criteria
Abbreviation
NC2RxQualULCriteria
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on uplink quality criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
2-1627
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.83 Uplink RxLev P Value

Full Name
Uplink RxLev P Value
Abbreviation
ULRxLevP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers uplink level reselection when P of N measured uplink
Description
levels meets the uplink level threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1628
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.84 Uplink RxLev N Value

Full Name
Uplink RxLev N Value
Abbreviation
ULRxLevN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers uplink level reselection when P of N measured uplink
Description
levels meets the uplink level threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1629
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.85 Uplink RxLev Criteria

Full Name
Uplink RxLev Criteria
Abbreviation
NC2RxLevULCriteria
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on uplink level criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1630
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.86 Traffic cell change threshold

Full Name
Traffic cell change threshold
Abbreviation
TrafficThr
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
When the traffic reselection switch of the serving cell is on and its load
reaches the value of this parameter, the system triggers reselection from
Description
this cell to other cells.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
The load of a serving cell should not be too high.
The load of a serving cell can be controlled through this parameter. To
make the load of this cell not too high, decrease the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1631
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.87 PBGT P Value

Full Name
PBGT P Value
Abbreviation
PBGTP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers PBGT reselection when P of continuous N measured
Description
PBGT values meets the PBGT threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1632
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.88 PBGT N Value

Full Name
PBGT N Value
Abbreviation
PBGTN
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers PBGT reselection when P of continuous N measured
Description
PBGT values meets the PBGT threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1633
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.89 PBGT Criteria

Full Name
PBGT Criteria
Abbreviation
PBGTCriteria
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Reselection based on PBGT criteria
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.90 Invalid reassign time

Full Name
invalid reassign time
Abbreviation
TInvalidIReassign
Managed Object
NC2 Configuration
2-1634
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Penalty for intra-cell resource changes caused by interference: When intra-cell interference occurs for the first time after timeslots are reassigned,
the MS enables the TInvalidIReassign timer. If timeslot reassignment reoccurs before the timer times out, it indicates that the previous timeslot reassignment does not improve the interference. The NInvalidIReassign timer
increases by 1 and meanwhile the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs after the timer times out, it indicates that
the previous time reassignment is valid. The NInvalidIReassign timer is
reset to 0 and meanwhile the MS enables the TInvalidIReassign timer. If
the NInvalidIReassign timer reaches the value of "NMaxInvalidIReassign",
it is unnecessary to improve interference by timeslot reassignment. In this
Description
case, cell reselection should be made.
Instance
Cell
0..31
Unit
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1635
SJ-20130408140048-016|2013-07-17(R1.0)
2.37.91 Invalid reassign maximum times

Full Name
invalid reassign maximum times
Abbreviation
NMaxInvalidIReassign
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
Penalty for intra-cell resource changes caused by interference: When intra-cell interference occurs for the first time after timeslots are reassigned,
the MS enables the TInvalidIReassign timer. If timeslot reassignment reoccurs before the timer times out, it indicates that the previous timeslot reassignment does not improve the interference. The NInvalidIReassign timer
increases by 1 and meanwhile the MS enables the TInvalidIReassign timer.
If timeslot reassignment reoccurs after the timer times out, it indicates that
the previous time reassignment is valid. The NInvalidIReassign timer is
reset to 0 and meanwhile the MS enables the TInvalidIReassign timer. If
the NInvalidIReassign timer reaches the value of "NMaxInvalidIReassign",
it is unnecessary to improve interference by timeslot reassignment. In this
Description
case, cell reselection should be made.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1636
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.37.92 Indication for sending PNCD before NC2 PCCO

Full Name
Indication for sending PNCD before NC2 PCCO
Abbreviation
NC2PNCDSendInd
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
In NC2 mode, this parameter determines whether to send a system message of the target cell to the MS before sending the "Packet cell change
Description
order" message.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
In NC2 mode, this parameter can be modified to shorten the access rate
in new cells.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1637
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.37.93 Downlink RxQual P Value

Full Name
Downlink RxQual P Value
Abbreviation
DLRxQualP
Managed Object
NC2 Configuration
3GPP Name
N/A
3GPP Reference
N/A
The system triggers downlink quality reselection when P of N measured
Description
downlink quality meets the downlink quality threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1638
SJ-20130408140048-016|2013-07-17(R1.0)
2.38 DTM Configuration (GDTM)

2.38.1 DTM Configuration ID
Full Name
DTM Configuration ID
Abbreviation
GDTM
Managed Object
DTM Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
DTM Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->DTM Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.38.2 DTM support

Full Name
DTM support
2-1639
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
DTMSupport
Managed Object
DTM Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter is broadcast to the MS in GPRS Cell options of SI13 and
PSI13, to indicate whether the cell supports the dual transfer mode (DTM).
Under this function, the A-category MS is allowed to initialize the packet
Description
requirement process under the dedicated mode.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value

If CN supports Common ID, whether to enable
the DTM function is dependent upon users' requirement of the current
network. The function supports concurrent services and users' felling

can be improved.
Change Mode
Offline
Related features
ZGO-01-03-005 Dual Transfer Mode
Related Parameters
GttpLapdmNum
Relationship
GttpLapdmNum is valid after the DTMSupport

Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1640
SJ-20130408140048-016|2013-07-17(R1.0)
2.38.3 Support enhanced DTM capability

Full Name
Support enhanced DTM capability
Abbreviation
DTMEnhanceCapa
Managed Object
DTM Configuration
3GPP Name
None
3GPP Reference
N/A
This parameter indicates whether the cell supports DTM enhanced capability. If yes, then:1, The MS enters the DTM transmission state without
releasing PS when it receives a paging request from CS. 2, The MS enters the Packet Transfer state without releasing PS resources when CS
Description
is released under DTM.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
These functions are not provided in the current
version.


according to the DTM settings and the functions supported by the current
version.
Change Mode
Offline
Related features
N/A
Related Parameters
DTMEnhanceCap
Relationship
This parameter is valid when the Support Enhanced DTM parameter of

BSC-level is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1641
SJ-20130408140048-016|2013-07-17(R1.0)
2.38.4 Max number of GTTP lapdm frame

Full Name
Max number of GTTP lapdm frame
Abbreviation
gttpLapdmNum
Managed Object
DTM Configuration
3GPP Name
MAX_LAPDm
3GPP Reference
3GPP TS 44.018
This parameter indicates the maximum number of GTTP Lapdm frames.
It specifies the maximum number of Lapdm frames of GPRS signalling
message transmitted on the main DCCH.If MS and the network side support DYM, MS is in the dedicated mode, and MS or the network side needs
to transparently transmit the upper layer information at the Um interface,
use GPRS transparent procedure on the main DCCH when: 1, the information to transmit is GPRS signalling; 2, length of the GTTP message is
Description
smaller than the setting value of this parameter.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
defaut value 3 is enough for general GMM signalling transfer
the higher the value, the longer the GPRS signalling is beared and the
more the LAPDm is effected.So the value should not be set too much.
Change Mode
Offline
Related features
ZGO-01-03-005 Dual Transfer Mode
Related Parameters
DTMSupport
Relationship
GttpLapdmNum is valid after the DTMSupport

Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1642
SJ-20130408140048-016|2013-07-17(R1.0)
2.39 PS Power Control (GPsPowerControl)

2.39.1 PS Power Control ID
Full Name
PS Power Control ID
Abbreviation
GPsPowerControl
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
PS Power Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->PS Power Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.2 Uplink power control strategy

Full Name
Uplink power control strategy

2-1643
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
ulPwCtrl
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the uplink power control policy of GPRS., including the following four modes: No control, open-loop control, close-
Description
loop control, and control based on quality.
Instance
Cell
0: No control
1: Open-loop control
2: Close-loop control
3: Control based on quality
Unit
N/A
Default Value
Default Value

Currently, only the open-loop control is supported.

This parameter value can be set to 1 when the uplink open-loop power
control should be enabled on site.If this function is enabled, uplink
intra-network interference can be reduced.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1644
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.3 Downlink power control strategy

Full Name
Downlink power control strategy
Abbreviation
dlPwCtrl
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the downlink power control policy of GPRS.,
including the following four modes: No control, open-loop control, close-
Description
loop control, and control based on quality.
Instance
Cell
0: No control
1: Open-loop control
2: Close-loop control
3: Control based on quality
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1645
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.4 Expected signal intensity of MS

Full Name
Expected signal intensity of MS
Abbreviation
ss_bts
Managed Object
PS Power Control
3GPP Name
SSb
3GPP Reference
3GPP TS 45.008
This parameter is used for the uplink open loop power control.
SSb = P - L = T0 - TCH - PBTS - 48
where
PBTS = BTS maximum output power
P = MS output power
L = path loss
TCH is an MS and channel specific power control parameter, sent to the
MS in an RLC control message .
T0 = 39 dBm for GSM 400, GSM 700, GSM 850 and GSM900
Description
= 36 dBm for DCS1 800 and PCS 1900
Instance
Cell
0..63
Unit
N/A
Default Value
40
Default Value

If the signal strength received by the MS is

close to -70dBm, it ensures PS services are performed in a normal
case.
If the transmitting power of the MS should
be reduced, and interference which is caused by PS services should
be alleviated, reduce the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1646
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.5 Downlink Power Control Mode

Full Name
Downlink Power Control Mode
Abbreviation
pwCtrlMode
Managed Object
PS Power Control
3GPP Name
BTS_PWR_CTRL_MODE
3GPP Reference
3GPP TS 45.008
This parameter determines the BTS downlink power control mode. BTS
has two power control modes: A and B. Under mode A, The power of
each radio block on the channel is calculated in accordance with the corresponding MS to which the block beongs. Under mode B, the radio block
that belogs to different MS on the channel uses the same transmission
Description
power.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1647
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.6 Power Control Level

Full Name
Power Control Level
Abbreviation
pwCtrlLev
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the power control precision of GPRS, describing the nominal output power and power control precision (dB) sent by the
MS under each power control level.Currently, this parameter is not used
Description
and does not need to be adjusted.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1648
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.39.7 Power descending of PDCH to BCCH in a mode

Full Name
Power descending of PDCH to BCCH in a mode
Abbreviation
p0
Managed Object
PS Power Control
3GPP Name
P0
3GPP Reference
3GPP TS 44.060
This parameter is an optional downlink power control parameter, included
in the PACKET UPLINK ASSIGNMENT and PACKET DOWNPLINK
ASSIGNMENT messages. If P0 is present, then downlink power control
is used. Otherwise, downlink power control is not used. Under the
packet transmission mode, P0 value is not allowed to be changed
unless rthe reassignment or a new assignment is established, and the
Description
assignment does not include any PDCHsassigned previously.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
the parameter is a feature parameter, default value is 0-not apply power
control.
The parameter is used when downlink power control
is enabled. The higher the P0 value, the lower the BTS transmission
power; the lower the P0 value, the higher the BTS transmission power.
Set it based on the actual condition.
Change Mode
Offline
Related features
ZGO-03-02-008 EGPRS on BCCH-TRX Configurable
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1649
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.8 Power control parameter

Full Name
Power control parameter
Abbreviation
Alpha
Managed Object
PS Power Control
3GPP Name
ALPHA
3GPP Reference
3GPP TS 44.060
This parameter is used at MS side. It is one of the global power control
and GPRS power control parameters, and is broadcast to an MS in the
PSI1, PSI13 and SI13 messages. This parameter determines the MS
Description
transmission power control parameter Alpha ().
Instance
Cell
0..10
Unit
N/A
Default Value
Default Value
environment.
Lower the value of this power control parameter
to decrease the MS transmission power reliance on the downlink level.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1650
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.39.9 Filter period in the packet idle mode

Full Name
Filter period in the packet idle mode
Abbreviation
T_AVG_W
Managed Object
PS Power Control
3GPP Name
T_AVG_W
3GPP Reference
3GPP TS 44.060
This parameter is used at MS side. It is one of the global power control and
GPRS power control parameters, and is broadcast to an MS in the PSI1,
PSI13 and SI13 messages. This parameter indicates the filter period of a
Description
signal intensity for power control in packet idle mode.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
environment.
This parameter is used when an MS surveys the downlink signal intensity

in packet idle mode, and calculates the C value. The formula is: Cn =
(1-a) Cn-1 + a Cblock, n, , a = 1/MIN(n, MAX(5, TAVG_W*NDRX))..
For the details, see 45008 10.2.3.1.1. Currently this parameter is not
supported and it is 0 by default.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1651
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.10 Filter period in packet transmission mode

Full Name
Filter period in packet transmission mode
Abbreviation
T_AVG_T
Managed Object
PS Power Control
3GPP Name
T_AVG_T
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is one of the global power control and GPRS power control parameters, and is broadcast to an MS in
the PSI1, PSI13 and SI13 messages. This parameter indicates the filter
period of the signal intensity for power control in the packet transmission
Description
mode.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
environment.
This parameter is used when an MS surveys the downlink signal

intensity in packet transmission mode, and calculates the C value. The

formula is: Cn = (1-b) Cn-1 + b SS n, , b = 1/(6*TAVG_T).. For the
details, see 45008 10.2.3.1.2. Currently this parameter is not supported
and it is 0 by default.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1652
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.11 Power control measurement channel

Full Name
Power control measurement channel
Abbreviation
PcMeasChan
Managed Object
PS Power Control
3GPP Name
PC_MEAS_CHAN
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is one of the global power control
PSI1, PSI13 and SI13 messages. This parameter indicates the position
Description
where the downlink power strength is surveyed for uplink power control.
Instance
Cell
0: BCCH
1: PDCH
Unit
N/A
Default Value
Default Value
Set it with the default value. MS surveys the
BCCH uplink power.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1653
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.12 Filter constant of power control

Full Name
Filter constant of power control
Abbreviation
N_AVG_I
Managed Object
PS Power Control
3GPP Name
N_AVG_I
3GPP Reference
3GPP TS 44.060
This parameter is used at the MS side. It is one of the global power control
PSI1, PSI13 and SI13 messages. This parameter is a filter constant used
Description
to optimize the interference signal intensity in power control.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
environment.

This parameter is used at MS side. It is a

factor used to calculate the downlink signal intensity. The default
value is recommended.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1654
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.13 Max power reduction of CS1

Full Name
Max power reduction of CS1
Abbreviation
CodePwrDecLmt1
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
control when the service encoding mode is CS1.
Instance
Cell
0..40
Unit
N/A
Default Value
26
Default Value
The maximum signal strength supported by the
encoding mode must be taken into consideration.
This parameter determines the maximum decreased power during power

If this parameter is configured too large,

the QoS will be affected. If this parameter is configured too smaller,
the range for power control adjustment will be restricted.
Change Mode
Offline
Related features
ZGO-04-02-016 PS Power Control
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1655
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt2
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
20
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
2-1656
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt3
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
16
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1657
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
CodePwrDecLmt4
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
12
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.17 Max power reduction of MCS1

Full Name
Max power reduction of MCS1
2-1658
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
CodePwrDecLmt5
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
control when the service encoding mode is MCS1.
Instance
Cell
0..40
Unit
N/A
Default Value
26
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt6
Managed Object
PS Power Control
2-1659
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
24
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt7
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1660
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
0..40
Unit
N/A
Default Value
22
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt8
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2-1661
SJ-20130408140048-016|2013-07-17(R1.0)
0..40
Unit
N/A
Default Value
20
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt9
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
2-1662
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
18
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt10
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
16
Default Value

2-1663
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt11
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
14
Default Value


2-1664
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt12
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
12
Default Value


Change Mode
Offline
Related features
2-1665
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
CodePwrDecLmt13
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..40
Unit
N/A
Default Value
10
Default Value


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1666
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.26 Window of averaging uplink signal

Full Name
Window of averaging uplink signal
Abbreviation
ulLevPSPwrMeaWnd
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the number of samples used for average calculation on the uplink signal strength measured during uplink power con-
Description
trol judgment.
Instance
Cell
1..31
Unit
N/A
Default Value
10
Default Value
Considering that uplink measurement report is comparatively submitted
quickly, each radio block can be reported once.

A greater value indicates a better performance of filter burst
measurement report but reduced power control decision sensitivity.
A lower value indicates more sensitive power control decision but

decreased accuracy.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1667
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.27 Window of averaging downlink signal

Full Name
Window of averaging downlink signal
Abbreviation
dlLevPSPwrMeaWnd
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the number of samples used for average calculation on the downlink signal strength measured during downlink power
Description
control judgement.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
Considering that downlink measurement report is comparatively
submitted slowly, multiple radio blocks can be reported once.


decreased accuracy.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-1668
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.28 Window of averaging uplink quality

Full Name
Window of averaging uplink quality
Abbreviation
ulQuaPSPwrMeaWnd
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the number of samples used for average calculation on the uplink signal quality measured during uplink power control
Description
judgment.
Instance
Cell
1..31
Unit
N/A
Default Value
10
Default Value
Considering that uplink measurement report is comparatively submitted
quickly, each radio block can be reported once.


decreased accuracy.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1669
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.29 Window of averaging downlink quality

Full Name
Window of averaging downlink quality
Abbreviation
dlQuaPSPwrMeaWnd
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the number of samples used for average calculation on the downlink signal quality measured during downlink power
Description
control judgment.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
Considering that downlink measurement report is comparatively
submitted slowly, multiple radio blocks can be reported once.


decreased accuracy.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1670
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.39.30 Threshold of uplink signal for increasing power

Full Name
Threshold of uplink signal for increasing power
Abbreviation
ulIncPSPwrThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink signal strength averages are lower than this
threshold during uplink power control judgment, the system considers
Description
this case as low level.
Instance
Cell
20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
30: -80
Unit
dBm
Default Value
22
Default Value
The signal strength for normal operation of
the PS service must be taken into consideration.

The larger the value of this parameter, the
higher the possibility of being considered as low level and thus the
higher the possibility of power increase during power judgment. The
smaller the value of this parameter, the lower the possibility of

being considered as low level and thus the lower the possibility of
power increase during power judgment.
2-1671
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.31 Threshold of downlink signal for increasing power

Full Name
Threshold of downlink signal for increasing power
Abbreviation
dlIncPSPwrThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink signal strength averages are lower than this
threshold during downlink power control judgment, the system considers
Description
Instance
Cell
20: -90
21: -89
22: -88
23: -87
24: -86
25: -85
26: -84
27: -83
28: -82
29: -81
30: -80
2-1672
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
dBm
Default Value
25
Default Value

higher the possibility of being considered as low level and thus the
higher the possibility of power increase during power judgment. The
smaller the value of this parameter, the lower the possibility of

being considered as low level and thus the lower the possibility of
power increase during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.32 Threshold of uplink signal for decreasing power

Full Name
Threshold of uplink signal for decreasing power
Abbreviation
ulDecPSPwrThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink signal strength averages are higher than this
threshold during uplink power control judgment, the system considers this
Description
case as high level.
Instance
Cell
2-1673
SJ-20130408140048-016|2013-07-17(R1.0)
32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
45: -65
Unit
dBm
Default Value
36
Default Value

The smaller the value of this parameter, the
higher the possibility of being considered as high level and thus
the higher the possibility of power decrease during power judgment.
The larger the value of this parameter, the lower the possibility
of being considered as high level and thus the lower the possibility
of power decrease during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1674
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.33 Threshold of downlink signal for decreasing power

Full Name
Threshold of downlink signal for decreasing power
Abbreviation
dlDecPSPwrThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink signal strength averages are higher than this
Description
this case as high level.
Instance
Cell
32: -78
33: -77
34: -76
35: -75
36: -74
37: -73
38: -72
39: -71
40: -70
41: -69
42: -68
43: -67
44: -66
45: -65
Unit
dBm
Default Value
40
Default Value

higher the possibility of being considered as high level and thus
of being considered as high level and thus the lower the possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1675
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.34 Threshold of uplink MEAN_BEP for increasing power in

GPRS
Full Name
Threshold of uplink MEAN_BEP for increasing power in GPRS
Abbreviation
ulIncMeanBepGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink MEAN_BEP averages are lower than this threshold during uplink power control judgment, the system considers this case
Description
as low quality.
Instance
Cell
12..24
Unit
N/A
Default Value
18
Default Value
The quality for normal operation of the PS
service must be taken into consideration.

higher the possibility of being considered as low quality and thus
the higher the possibility of power increase during power judgment.
The smaller the value of this parameter, the lower the possibility
of being considered as low quality and thus the lower the possibility
of power increase during power judgment.
Change Mode
Offline
Related features
2-1676
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.35 Threshold of uplink CV_BEP for increasing power in GPRS

Full Name
Threshold of uplink CV_BEP for increasing power in GPRS
Abbreviation
ulIncCvBepGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink CV_BEP averages are lower than this threshold
during uplink power control judgment, the system considers this case as
Description
low quality. This parameter is currently not available.
Instance
Cell
2..5
Unit
N/A
Default Value
Default Value

Change Mode
Offline
2-1677
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.36 Threshold of downlink quality for increasing power in GPRS

Full Name
Threshold of downlink quality for increasing power in GPRS
Abbreviation
dlIncQuaGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink quality averages are higher than this threshold
during downlink power control judgment of the GPRS service, the system
Description
considers this case as low quality.
Instance
Cell
2..5
Unit
N/A
Default Value
Default Value

2-1678
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.37 Threshold of uplink MEAN_BEP for decreasing power in

GPRS
Full Name
Threshold of uplink MEAN_BEP for decreasing power in GPRS
Abbreviation
ulDecMeanBepGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink MEAN_BEP averages are higher than this threshold during uplink power control judgment of the GPRS service, the system
Description
considers this case as high quality.
Instance
Cell
27..30
Unit
N/A
Default Value
29
Default Value
2-1679
SJ-20130408140048-016|2013-07-17(R1.0)

higher the possibility of being considered as high quality and thus
of being considered as high quality and thus the lower the possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.38 Threshold of uplink CV_BEP for decreasing power in GPRS

Full Name
Threshold of uplink CV_BEP for decreasing power in GPRS
Abbreviation
ulDecCvBepGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink CV_BEP averages are higher than this threshold
and P out of N uplink MEAN_BEP averages are higher than the corresponding MEAN_BEP threshold during uplink power control judgment of
the GPRS service, the system considers this case as high quality. This
Description
parameter is currently not available.
Instance
Cell
5..6
Unit
N/A
Default Value
6
2-1680
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.39 Threshold of downlink quality for decreasing power in

GPRS
Full Name
Threshold of downlink quality for decreasing power in GPRS
Abbreviation
dlDecQuaGprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink quality averages are lower than this threshold
Description
Instance
Cell
1..2
2-1681
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.40 Threshold of uplink MEAN_BEP for increasing power in

EDGE
Full Name
Threshold of uplink MEAN_BEP for increasing power in EDGE
Abbreviation
ulIncMeanBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink MEAN_BEP averages are lower than this threshold during uplink power control judgment of the EDGE service, the system
Description
2-1682
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
12..24
Unit
N/A
Default Value
18
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.41 Threshold of uplink CV_BEP for increasing power in EDGE

Full Name
Threshold of uplink CV_BEP for increasing power in EDGE
Abbreviation
ulIncCvBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1683
SJ-20130408140048-016|2013-07-17(R1.0)
When P out of N uplink CV_BEP averages are lower than this threshold
during uplink power control judgment of the EDGE service, the system
considers this case as low quality. This parameter is currently not availDescription
able.
Instance
Cell
2..5
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.42 Threshold of downlink MEAN_BEP for increasing power in

EDGE
Full Name
Threshold of downlink MEAN_BEP for increasing power in EDGE
Abbreviation
dlIncMeanBepEgprsThr
Managed Object
PS Power Control
2-1684
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
during downlink power control judgment of the EDGE service, the system
Description
Instance
Cell
12..24
Unit
N/A
Default Value
18
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.43 Threshold of downlink CV_BEP for increasing power in

EDGE
Full Name
Threshold of downlink CV_BEP for increasing power in EDGE
2-1685
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
dlIncCvBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink CV_BEP averages are lower than this threshold
considers this case as high quality. This parameter is currently not avail-
Description
able.
Instance
Cell
2..5
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1686
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.44 Threshold of uplink MEAN_BEP for decreasing power in

EDGE
Full Name
Threshold of uplink MEAN_BEP for decreasing power in EDGE
Abbreviation
ulDecMeanBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink MEAN_BEP averages are higher than this threshold during uplink power control judgment of the EDGE service, the system
Description
Instance
Cell
27..30
Unit
N/A
Default Value
29
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1687
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.45 Threshold of uplink CV_BEP for decreasing power in EDGE

Full Name
Threshold of uplink CV_BEP for decreasing power in EDGE
Abbreviation
ulDecCvBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink CV_BEP averages are higher than this threshold
and P out of N uplink MEAN_BEP averages are higher than the corresponding MEAN_BEP threshold during uplink power control judgment of
the EDGE service, the system considers this case as high quality. This
Description
parameter is currently not available.
Instance
Cell
5..6
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1688
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.46 Threshold of downlink MEAN_BEP for decreasing power in

EDGE
Full Name
Threshold of downlink MEAN_BEP for decreasing power in EDGE
Abbreviation
dlDecMeanBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink MEAN_BEP averages are higher than this
threshold during downlink power control judgment of the EDGE service,
Description
the system considers this case as high quality.
Instance
Cell
27..30
Unit
N/A
Default Value
29
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1689
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.47 Threshold of downlink CV_BEP for decreasing power in

EDGE
Full Name
Threshold of downlink CV_BEP for decreasing power in EDGE
Abbreviation
dlDecCvBepEgprsThr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N downlink CV_BEP averages are higher than this threshold and P out of N downlink MEAN_BEP averages are higher than the
corresponding MEAN_BEP threshold during downlink power control judgment of the EDGE service, the system considers this case as high quality.
Description
This parameter is currently not available.
Instance
Cell
5..6
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
2-1690
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.39.48 N of uplink signal for increasing power

Full Name
N of uplink signal for increasing power
Abbreviation
ulIncPSPwrLevN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value
In the uplink direction, the measurement report
is reported quickly. Therefore, each radio module can report it once.

lower the requirements of power judgment and thus the higher the
possibility
of power increase during power judgment. The smaller the value of

this parameter, the higher the requirements of power judgment and
thus the lower the possibility of power increase during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1691
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.49 N of downlink signal for increasing power

Full Name
N of downlink signal for increasing power
Abbreviation
dlIncPSPwrLevN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value
In the downlink direction, the measurement

report is reported slowly. Therefore, multiple radio modules can report
it once.

possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1692
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.50 N of uplink signal for decreasing power

Full Name
N of uplink signal for decreasing power
Abbreviation
ulDecPSPwrLevN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
case as high level.
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value


possibility
of power decrease during power judgment. The smaller the value of
thus the lower the possibility of power decrease during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1693
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.51 N of downlink signal for decreasing power

Full Name
N of downlink signal for decreasing power
Abbreviation
dlIDecPSPwrLevN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-1694
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.52 N of uplink quality for increasing power in GPRS

Full Name
N of uplink quality for increasing power in GPRS
Abbreviation
ulIncPSPwrGprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink quality averages are lower than this threshold
during uplink power control judgment of the GPRS service, the system
Description
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value

possibility

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1695
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.53 N of downlink quality for increasing power in GPRS

Full Name
N of downlink quality for increasing power in GPRS
Abbreviation
dlIncPSPwrGprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1696
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.54 N of uplink quality for decreasing power in GPRS

Full Name
N of uplink quality for decreasing power in GPRS
Abbreviation
ulDecPSPwrGprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
When P out of N uplink quality averages are higher than this threshold
Description
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value

possibility

Change Mode
Offline
Related features
Related Parameters
N/A
2-1697
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.55 N of downlink quality for decreasing power in GPRS

Full Name
N of downlink quality for decreasing power in GPRS
Abbreviation
dlIDecPSPwrGprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility

Change Mode
Offline
Related features

2-1698
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.56 N of uplink quality for increasing power in EDGE

Full Name
N of uplink quality for increasing power in EDGE
Abbreviation
ulIncPSPwrEgprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value

possibility

Change Mode
Offline
2-1699
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.57 N of downlink quality for increasing power in EDGE

Full Name
N of downlink quality for increasing power in EDGE
Abbreviation
dlIncPSPwrEgprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility

2-1700
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.58 N of uplink quality for decreasing power in EDGE

Full Name
N of uplink quality for decreasing power in EDGE
Abbreviation
ulDecPSPwrEgprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
30
Default Value
2-1701
SJ-20130408140048-016|2013-07-17(R1.0)

possibility
of power decrease during power judgment. The larger the value of this
parameter, the higher the requirements of power judgment and thus
the lower the possibility of power decrease during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.59 N of downlink quality for decreasing power in EDGE

Full Name
N of downlink quality for decreasing power in EDGE
Abbreviation
dlIDecPSPwrEgprsQuaN
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
2-1702
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.60 P of uplink signal for increasing power

Full Name
P of uplink signal for increasing power
Abbreviation
ulIncPSPwrLevP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
2-1703
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
25
Default Value

possibility
of power increase during power judgment. The larger the value of this
the lower the possibility of power increase during power judgment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.61 P of downlink signal for increasing power

Full Name
P of downlink signal for increasing power
Abbreviation
dlIncPSPwrLevP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
2-1704
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.62 P of uplink signal for decreasing power

Full Name
P of uplink signal for decreasing power
Abbreviation
ulDecPSPwrLevP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
case as high level.
Instance
Cell
2-1705
SJ-20130408140048-016|2013-07-17(R1.0)
5..50
Unit
N/A
Default Value
25
Default Value

possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.63 P of downlink signal for decreasing power

Full Name
P of downlink signal for decreasing power
Abbreviation
dlIDecPSPwrLevP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
2-1706
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.64 P of uplink quality for increasing power in GPRS

Full Name
P of uplink quality for increasing power in GPRS
Abbreviation
ulIncPSPwrGprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1707
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Instance
Cell
5..50
Unit
N/A
Default Value
25
Default Value

possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.65 P of downlink quality for increasing power in GPRS

Full Name
P of downlink quality for increasing power in GPRS
Abbreviation
dlIncPSPwrGprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
2-1708
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.66 P of uplink quality for decreasing power in GPRS

Full Name
P of uplink quality for decreasing power in GPRS
Abbreviation
ulDecPSPwrGprsQuaP
Managed Object
PS Power Control
2-1709
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
25
Default Value

possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.67 P of downlink quality for decreasing power in GPRS

Full Name
P of downlink quality for decreasing power in GPRS
Abbreviation
dlIDecPSPwrGprsQuaP
2-1710
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.68 P of uplink quality for increasing power in EDGE

Full Name
P of uplink quality for increasing power in EDGE

2-1711
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
ulIncPSPwrEgprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
25
Default Value

possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1712
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.69 P of downlink quality for increasing power in EDGE

Full Name
P of downlink quality for increasing power in EDGE
Abbreviation
dlIncPSPwrEgprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1713
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.70 P of uplink quality for decreasing power in EDGE

Full Name
P of uplink quality for decreasing power in EDGE
Abbreviation
ulDecPSPwrEgprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
5..50
Unit
N/A
Default Value
25
Default Value

possibility

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1714
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.71 P of downlink quality for decreasing power in EDGE

Full Name
P of downlink quality for decreasing power in EDGE
Abbreviation
dlIDecPSPwrEgprsQuaP
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2..15
Unit
N/A
Default Value
Default Value

it once.
possibility

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1715
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.72 Step of uplink power increase

Full Name
Step of uplink power increase
Abbreviation
ulIncPSPwrChgStep
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the step of power increase during uplink power
Description
control.
Instance
Cell
2, 4
Unit
dB
Default Value
Default Value
The power adjusted each time must not be too
large, so as to avoid fluctuation.


smaller the power increased and thus the smoother the adjustment.
The larger the value of this parameter, the larger the power increased
and thus the faster the adjustment. However, this is easy to cause
fluctuation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1716
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.73 Step of uplink power decrease

Full Name
Step of uplink power decrease
Abbreviation
ulDecPSPwrChgStep
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the step of power decrease during uplink
Description
power control.
Instance
Cell
2, 4
Unit
dB
Default Value
Default Value


smaller the power decreased and thus the smoother the adjustment.
The larger the value of this parameter, the larger the power decreased
fluctuation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1717
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.74 Step of downlink power increase

Full Name
Step of downlink power increase
Abbreviation
dlIncPSPwrChgStep
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the step of power increase during downlink
Description
power control.
Instance
Cell
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
8: 4dB
Unit
N/A
Default Value
Default Value


smaller the power increased and thus the smoother the adjustment.
The larger the value of this parameter, the larger the power increased
fluctuation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1718
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.75 Step of downlink power decrease

Full Name
Step of downlink power decrease
Abbreviation
dlDecPSPwrChgStep
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the step of power decrease during downlink
Description
power control.
Instance
Cell
1: 0.5dB
2: 1dB
3: 1.5dB
4: 2dB
5: 2.5dB
6: 3dB
7: 3.5dB
8: 4dB
Unit
N/A
Default Value
Default Value


smaller the power decreased and thus the smoother the adjustment.
The larger the value of this parameter, the larger the power decreased
fluctuation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1719
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.76 Mode of downlink closed loop power control

Full Name
Mode of downlink closed loop power control
Abbreviation
dlClosePwrCtrlMode
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
uses the rate first or power decrease mode.
Instance
Cell
This parameter indicates whether the downlink closed-loop power control
0: velocity prior mode

1: power fall mode
Unit
N/A
Default Value
Default Value
Try to lower the impact on speed when decreasing
power.
In the rate first mode, try to lower the impact
on the speed of subscribers when decreasing power. The higher the

condition for power control judgment, the smaller the decreased power.
In the power decrease mode, try to decrease the transmit power of
the BTS. The looser the condition for power control judgment, the
larger the decreased power. In this mode, the speed of subscribers
may be decreased. Select the required mode according to requirements.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1720
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.39.77 lowest CS of enabling downlink power control in GPRS

Full Name
lowest CS of enabling downlink power control in GPRS
Abbreviation
PSPwrCtrlGprsLowCS
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
In the case of power decrease during downlink PS power control, this parameter determines the lowest encoding format allowed for power control
Description
in GPRS mode.
Instance
Cell
1: CS1
2: CS2
3: CS3
4: CS4
Unit
N/A
Default Value
Default Value
Power must be decreased in good radio environments.
2-1721
SJ-20130408140048-016|2013-07-17(R1.0)

value, it indicates that downlink power control can be implemented
with the low encoding format in GPRS mode. In this case, the possibility
and scale of power decrease are high, and the speed loss is high.
If this parameter is configured to a large value, it indicates that
downlink power control can be implemented with the high encoding
format
in GPRS mode. In this case, the possibility and scale of power decrease
are low, and the speed loss is low.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.39.78 lowest MCS of enabling downlink power control in EDGE

Full Name
lowest MCS of enabling downlink power control in EDGE
Abbreviation
PSPwrCtrlEgprsLowCS
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
In the case of power decrease during downlink PS power control, this parameter determines the lowest encoding format allowed for power control
Description
in the EDGE mode.
Instance
Cell
2-1722
SJ-20130408140048-016|2013-07-17(R1.0)
1: MCS1
2: MCS2
3: MCS3
4: MCS4
5: MCS5
6: MCS6
7: MCS7
8: MCS8
9: MCS9
Unit
N/A
Default Value
Default Value
Power must be decreased in good radio environments.

value, it indicates that downlink power control can be implemented
with the low encoding format in EDGE mode. In this case, the possibility

and scale of power decrease are high, and the speed loss is high.
If this parameter is configured to a large value, it indicates that
downlink power control can be implemented with the high encoding
format
in EDGE mode. In this case, the possibility and scale of power decrease
are low, and the speed loss is low.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2-1723
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.79 try to decrease downlink power

Full Name
try to decrease downlink power
Abbreviation
TryDecDlPSPwr
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
In the case of power decrease during downlink PS power control, this
parameter determines whether to apply the power control result directly
Description
to decease power without considering the auto-adaptive judgment result.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Decrease much power in the case of downlink
power decease.


according to the requirements on site. To decrease much power, select
"Yes". To consider both speed and power decrease, select "No".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2-1724
SJ-20130408140048-016|2013-07-17(R1.0)
2.39.80 reduced power of dummy usf in good uplink radio condition

Full Name
reduced power of dummy usf in good uplink radio condition
Abbreviation
DummyUsfPwr1
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines the deteriorated power of the downlink dummy
block with USF when the downlink power control is enabled and the radio
Description
quality of the uplink TBF is good.
Instance
Cell
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Default Value
Power decrease in normal cases is implemented
when the uplink signal quality is good.


according to the requirements on site. To decrease much power,

configure
this parameter to a large value. To consider both speed and power
decrease, configure this parameter to a small value.
2-1725
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.39.81 reduced power of dummy usf in general uplink radio

condition
Full Name
reduced power of dummy usf in general uplink radio condition
Abbreviation
DummyUsfPwr2
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
quality of the uplink TBF is normal.
Instance
Cell
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
2-1726
SJ-20130408140048-016|2013-07-17(R1.0)
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Default Value
when the uplink signal quality is normal.



configure
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.39.82 reduced power of dummy usf in bad uplink radio condition

Full Name
reduced power of dummy usf in bad uplink radio condition
Abbreviation
DummyUsfPwr3
2-1727
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
PS Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
quality of the uplink TBF is poor.
Instance
Cell
0: 0
1: 0.5
2: 1
3: 1.5
4: 2
5: 2.5
6: 3
7: 3.5
8: 4
9: 4.5
10: 5
11: 5.5
12: 6
13: 6.5
14: 7
15: 7.5
16: 8
17: 8.5
18: 9
19: 9.5
20: 10
Unit
dB
Default Value
Default Value
when the uplink signal quality is poor.



configure
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-1728
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
New
2.40 EDGE Configuration (GCellEdge)

2.40.1 EDGE Configuration ID
Full Name
EDGE Configuration ID
Abbreviation
GCellEdge
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
EDGE Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1729
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.2 EGPRS packet channel request access program support

Full Name
EGPRS packet channel request access program support
Abbreviation
egprsPacketChReq
Managed Object
EDGE Configuration
3GPP Name
EGPRS_PACKET_CHANNEL_REQUEST
3GPP Reference
3GPP TS 44.060
This parameter is broadcast to an MS in GRPS CELL OPTIONS
of SI13, PSI1 and PSI13, indicating whether the cell supports EGPRS_PACKET_CHANNEL_REQUEST access flow. If the cell supports
EGPRS and this flow, the EGPRS terminal is able to originate EGPRS
Description
packet access flow on RACH or PRACH (if PBCCH exists).
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
access to enable this function. For the cell without forcible two
phase access, the MS supporting EGPRS will trigger one-phase access
The network side hopes MS adopts one phase
procedure.
Change Mode
Offline
Related features
ZGO-03-05-003 EGPRS Packet Channel Request on CCCH
Related Parameters
N/A
Relationship
N/A
2-1730
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.3 Uplink LA+IR quality control support

Full Name
Uplink LA+IR quality control support
Abbreviation
irSupportUp
Managed Object
EDGE Configuration
3GPP Name
RESEGMENT
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the cell supports "uplink IR quality control". If it does, the network could set the RESEGMENT in PACKET UPLINK ACK/NACK, PACKET UPLINK ASSIGNMENT and PACK TIMESLOT RECONFIGURE message as FALSE to inform MS system of using
IR quality control mode, and MS uplink retransmission could not be seg-
Description
mented.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Change Mode

If this switch is enabled, the uplink throughput
can be improved, and MS uplink retransmission is not segmented but
occupies BTS memory.
Offline
ZGO-03-05-002 EGPRS Link Adaptation
Related features
ZGO-03-05-006 Incremental Redundancy in UL

2-1731
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.4 Take Preemptive transmit bit function

Full Name
Take Preemptive transmit bit function
Abbreviation
preEmptiveTrans
Managed Object
EDGE Configuration
3GPP Name
PRE_EMPTIVE_TRANSMISSION
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the cell employs "Preemptivetrans bit".
If the cell supports that function, the network indicates the MS whether
to send the RLC data of PENDING-ACK when there is no data in NACK
status and no new RLC data block to be transmitted or the transmission
window is full by PRE_EMPTIVE_TRANSMISSION in PACKET UPLINK
ACK/NACK message.
Yes: Use preemptive transmission. The MS should not send the data
block in PENDING-ACK status. But for the last piece of current TBF,
even if its status is PENDING ACK, it should be transmitted.
No: Do not use preemptive transmission. The MS should send the oldest
data in PENDING-ACK status, then the second oldest data. If all data in
Description
PENDING-ACK status have been sent, repeated from the oldest one.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
0
2-1732
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

If the cell supports that function, network
indicates MS whether to send the RLC data of PENDING-ACK when
there

is no data in NACK status and no new RLC data block to be transmitted

or the transmission window is full by PRE_EMPTIVE_TRANSMISSION
in
PACKET UPLINK ACK/NACK message.Enabling the preemptive
transmit function
can improve throughput to a certain extent.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.5 Average filter period for uplink BEP

Full Name
Average filter period for uplink BEP
Abbreviation
bepPeriodUp
Managed Object
EDGE Configuration
3GPP Name
BEP_PERIOD
3GPP Reference
3GPP TS 45.008
This parameter is the internal parameter of PCU. The meaning of this
parameter is the same as BEPPeriodDown, but it is to calculate the uplink
Description
measurement data inside of PCU.
Instance
Cell
2-1733
SJ-20130408140048-016|2013-07-17(R1.0)
0..15
Unit
N/A
Default Value
Default Value
A sudden adjustment in the coding mode caused by the sudden change

in the uplink measurement report can be avoided by increasing the
weight of the previous measurement report appropriately.
The relatively large value helps increase the weight of the previous
measurement report. Consequently, it brings a positive impact on the
related index of throughput and the actual calculated BEP is more
reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.6 Average filter period for downlink BEP

Full Name
Average filter period for downlink BEP
Abbreviation
bepPeriodDown
Managed Object
EDGE Configuration
3GPP Name
BEP_PERIOD
3GPP Reference
3GPP TS45.008
2-1734
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is broadcast to an MS in GRPS CELL OPTIONS of

SI13, PSI1 and PSI13. In EGPRS system, EGPRS MS will determine
to report the MEAN_REP_AV (average error bit rate of the radio block)
and CV_BEP_AV (variance coefficient of radio block error bit rate) under
the whole TBF, or the measurement data per time slot MEAN_BEP_TNx
(0-7).
The specification defines the formula of these measurement data (refer
to 05.08 10.2.3.2.1). There is an oblivion factor e, whose value is defined
Description
by the average period of BEP filter.
Instance
Cell
0..10
Unit
N/A
Default Value
Default Value
Consider Protocol Recommended Value and MS measure time

The relatively large value helps increase the weight of the previous
measurement report. Consequently, it brings a positive impact on the
related index of throughput and the actual calculated BEP is more
reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1735
SJ-20130408140048-016|2013-07-17(R1.0)
2.40.7 EGPRS phone quality measure mode

Full Name
EGPRS phone quality measure mode
Abbreviation
linkQuaMeaMode
Managed Object
EDGE Configuration
3GPP Name
LINK_QUALITY_MEASUREMENT_MODE
3GPP Reference
3GPP TS 44.060
This parameter is sent to MS in the PACKET DOWNLINK ASSIGNMENT
or PACKET TIMESLOT RECONFIGURE message. It indicates the
measurement report mode of EGPRS
MS in the cell. EGPRS measurement could be performed based on
each impulse, which is to measure by the granularity of BURST. The
feature of rapid EGPRS measurement makes the network side be able
to respond the change of radio environment quickly, so as to choose the
most proper coding mode and perform power control.
This parameter sets the measurement content in EGPRS Timeslot Link
Quality Measurements IE. The following defines the parameter values:
0: The MS reports MEAN-BEP rather than I_LEVEL in accordance with
the TBF.
1: The MS reports MEAN-BEP in accordance with the TBF, and reports
I_LEVEL obtained from the slot 0 to 7.
2. The MS reports MEAN-BEP (rather than I_LEVEL) to which a timeslot
is allocated.
3. The MS reports MEAN-BEP to which a timeslot is allocated, and
Description
reports I_LEVEL of which the number of timeslots is no more than 4.
Instance
Cell
0..3
Unit
N/A
Default Value
Default Value
in theory, the performance is best when report on each timeslots

If the value is 123, the MS shall report on each timeslot.In live

network, some MS may report abnormal value so that adaptive schedule

of coding scheme is effected.On the other hand, MEAN_BEP and
CV_BEP reporting is more reasonable, so the proposed value is 0.
Change Mode
Offline
Related features
ZGO-03-05-002 EGPRS Link Adaptation
Related Parameters
N/A
Relationship
N/A
2-1736
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.8 EGPRS uplink init. Coding scheme

Full Name
EGPRS uplink init. Coding scheme
Abbreviation
egprsCodecInitUl
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter defines the EGPRS uplink initial coding scheme of a cell.
Instance
Cell
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Default Value
MCS6 is sufficient to meet data transmission requirement in normal
radio conditions.
Set this parameter based on the radio signal quality. If the radio quality
is good, use a higher initial rate..
Change Mode
Offline
Related features
N/A
2-1737
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.9 EGPRS downlink init. Coding scheme

Full Name
EGPRS downlink init. Coding scheme
Abbreviation
egprsCodecInitDl
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines the EGPRS downlink initial coding scheme of a
Description
cell.
Instance
Cell
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Default Value
MCS6 is sufficient to meet data transmission requirement
2-1738
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.10 EGPRS uplink max. coding scheme

Full Name
EGPRS uplink max. coding scheme
Abbreviation
egprsCodecMaxUl
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines the EGPRS uplink maximum coding scheme of a
Description
cell.
Instance
Cell
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
2-1739
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Set it to the maximum MCS9.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.11 EGPRS downlink max. coding scheme

Full Name
EGPRS downlink max. coding scheme
Abbreviation
egprsCodecMaxDl
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter defines the EGPRS downlink maximum coding scheme
Description
of a cell.
Instance
Cell
2-1740
SJ-20130408140048-016|2013-07-17(R1.0)
0: MCS1
1: MCS2
2: MCS3
3: MCS4
4: MCS5
5: MCS6
6: MCS7
7: MCS8
8: MCS9
Unit
N/A
Default Value
Default Value
Set this parameter to the maximum MCS9.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.12 edge Initial access rate

Full Name
edge Initial access rate
Abbreviation
EdgeIniAccRate
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1741
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter identifies the bandwidth occupied by service access when

Description
the EDGE channel is activated.
Instance
Cell
1..122
Unit
kbps
Default Value
32
Default Value
Set the parameter based on the bandwidth of MCS6 with normal rate.
A greater initial access and admission bandwidth indicates a greater
initial access rate. Set this parameter based on the network's radio
quality and bandwidth.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.13 EGPRS phones init. Code can be changed

Full Name
EGPRS phones init. Code can be changed
Abbreviation
initAttachExchEgprs
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1742
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether the coding mode used by the GPRS
MS in a cell can be dynamically changed.
0: the coding ,mode cannot be dynamically changed.
Description
1: the coding mode can be dynamically changed.
Instance
Cell
1: Yes
0: No
Unit
N/A
Default Value
Default Value
The adaptive coding scheme can improve the data throughput

The value is better set to Yes in accordance
with the adaptive coding scheme of radio environment, so as to improve
the packet transmission rate.
Change Mode
Offline
Related features
ZGO-03-05-002 Initial Coding Scheme per Cell Settable
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.14 Bep_Period2 of uplink

Full Name
Bep_Period2 of uplink
Abbreviation
ulBepPeriod2
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
2-1743
SJ-20130408140048-016|2013-07-17(R1.0)
The protocol (45.008) stipulates the calculation formula of the measurement data. The oblivion factor e whose value is defined by the average
period of the BEP filter is used in the formula. This parameter is used to
calculate the uplink measurement data of a certain MS inside of PCU and
takes priority over the general parameter BEPperiodUp. If this parameter
Description
is unavailable, use the parameter BEPperiodUp.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
Currently, this parameter is not used and does
not need to be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.15 Bep_Period2 of downlink

Full Name
Bep_Period2 of downlink
Abbreviation
dlBepPeriod2
Managed Object
EDGE Configuration
3GPP Name
BEP_PERIOD2
3GPP Reference
3GPP TS 45.008
2-1744
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is sent to the MS. The protocol (45.008) stipulates the
calculation formula of the measurement data. The oblivion factor e
whose value is defined by the average period of the BEP filter is used in
the formula. This parameter is applied to a certain MS and takes priority
over the BEPperiodDown parameter broadcast in the system message
13 or the packet system message 13. If this parameter is unavailable,
the MS uses the BEPperiodDown parameter. If this parameter is
Description
available, the MS uses the Through PACCH/DL parameter.
Instance
Cell
0..15
Unit
N/A
Default Value
Default Value
Currently, this parameter is not used and does
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.16 Interval number of downlink EGPRS TBF's RRBP

Full Name
Interval number of downlink EGPRS TBF's RRBP
Abbreviation
egprsDlRRBPInterval
Managed Object
EDGE Configuration
3GPP Name
N/A
2-1745
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates the interval that downlink EGPRS TBF requires
Description
MS to send EGPRS Packet Donwlink Ack/Nack.
Instance
Cell
6..60
Unit
N/A
Default Value
10
Default Value
It is recommended to set it to 10 in a radio network with the ratio of
downlink speech RQ0-5 as around 97%.

If this parameter is set to a low value, for EDGE service, MS's downlink
receiving bitmap information can be notified to BSC in a faster way, but

more uplink signaling blocks are occupied. If this parameter is set to a

great value, MS's downlink receiving bitmap information are notified
to BSC slowly and less uplink signaling blocks are occupied. In this
case, re-transmission rate at RLC layer is reduced. The value needs no
modification unless specially required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.17 Interval number of uplink EGPRS TBF's ACK

Full Name
Interval number of uplink EGPRS TBF's ACK
Abbreviation
egprsUlAckInterval
Managed Object
EDGE Configuration
2-1746
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the interval that the uplink EGPS TBF network
Description
sends packet uplink Ack/Nack to the MS.
Instance
Cell
3..20
Unit
N/A
Default Value
Default Value
It is recommended to set the default value as 8 when the percentage
of the downlink voice RQ0~5 is around 97%.

The smaller the value is, the fewer the EDGE
services are, the faster the uplink received bitmap information of
the MS can be notified to BSC, and the more the downlink signalling
blocks are occupied. The larger the value is, the more the EDGE
services
are, the slower the uplink received bitmap information of the MS can
be notified to BSC, and the fewer the downlink signalling blocks are
occupied. If no special requirement, the value should not be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.40.18 Initial EGPRS code schem at one phase access

Full Name
Initial EGPRS code schem at one phase access
Abbreviation
OnePhaAccIniECodSch
2-1747
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
When the value of "OnePhaAccIniCodSet" (one-phase access initial code
Description
selection) is 0, this parameter determines the EGPRS initial code scheme.
Instance
Cell
0..8
Unit
N/A
Default Value
Default Value

This parameter affects the initial access code scheme of all MSs in
the cell. Increase the value of this parameter while ensuring the link
establishment success rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41 Enhanced EDGE Configuration (GEhancedEdge)

2.41.1 Enhanced EDGE Configuration ID
Full Name
Enhanced EDGE Configuration ID
Abbreviation
GEhancedEdge
2-1748
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Enhanced EDGE Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Enhanced EDGE Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->GPRS Configuration->EDGE Configuration->Enhanced

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.2 EGPRS2-A uplink initial coding scheme

Full Name
EGPRS2-A uplink initial coding scheme
Abbreviation
egprs2ACodecInitUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1749
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the coding scheme initially used by EGPRS2A

Description
MS in the uplink.
Instance
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
N/A
Default Value
15
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
egprs2ACodecMaxUl
Relationship
The value of EGPRS2AInitAttSelt_0 is not greater

than that of EGPRS2AInitAttSelt_2.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1750
SJ-20130408140048-016|2013-07-17(R1.0)
2.41.3 EGPRS2-A downlink initial coding scheme

Full Name
EGPRS2-A downlink initial coding scheme
Abbreviation
egprs2ACodecInitDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the coding scheme initially used by EGPRS2A
Description
MS in the downlink.
Instance
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
20: DAS12
Unit
N/A
Default Value
17
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1751
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.4 EGPRS2-A uplink maximum coding scheme

Full Name
EGPRS2-A uplink maximum coding scheme
Abbreviation
egprs2ACodecMaxUl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum coding scheme that can be used
Description
by EGPRS2A MS in the uplink.
Instance
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
N/A
Default Value
17
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
egprs2ACodecInitUl
2-1752
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
The value of EGPRS2AInitAttSelt_1 is not greater

than that of EGPRS2AInitAttSelt_3.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.5 EGPRS2-A downlink maximum coding scheme

Full Name
EGPRS2-A downlink maximum coding scheme
Abbreviation
egprs2ACodecMaxDl
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
by EGPRS2A MS in the downlink.
Instance
Cell
This parameter indicates the maximum coding scheme that can be used
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
20: DAS12
Unit
N/A
Default Value
20
2-1753
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.6 FANR TBF support

Full Name
FANR TBF support
Abbreviation
TBFFanrSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the cell supports the fast
acknowledgement report (FANR) function. If the network and the MS
support this function, the MS can receive messages through donwlink
radio blocks carried in the uplink radio block, and the network can
receive messages through uplink radio blocks carried in the downlink
radio block. In this case, they can timely know the receiving condition of
uplink/downlink radio blocks, and the retransmission of uplink/downlink
radio blocks that are improperly received is accelerated. The FANR is
Description
one of the EDGE evolution functions.
Instance
Cell
2-1754
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
This function is newly added in the protocol and is not enabled by default.
Enable this function if FANR function needs to be provided on site.
Change Mode
Offline
Related features
N/A
Related Parameters
FanrSupport
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.7 DLDC support

Full Name
DLDC support
Abbreviation
dlDCSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the cell supports downlink dual carrier.If
the network and MS support the downlink dual carrier, two carriers can be
Description
allocated to the downlink.
Instance
Cell
2-1755
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
refGTrx
Relationship
refGTrx of GTrx needs to be configured when this parameter is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.8 RTTI support

Full Name
RTTI support
Abbreviation
rttiSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1756
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether the reduced transmission time Interval

(RTTI) function is supported.
RTTI is a concept relative to BTTI. BTTI is short for basic transmission
time interval, that is, using four consecutive Bursts on a channel
to transmit a radio block, and it takes 20 ms to transmit a radio block. For
RTTI, two consecutive Bursts on two channels (PDCH-pair) respectively
Description
are used, and it takes only 10 ms to transmit a radio block.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
RTTIPrefer
Relationship
The RTTIPrefer parameter should be configured until this parameter

is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.9 Enable event-based FANR in downlink TBF

Full Name
Enable event-based FANR in downlink TBF
Abbreviation
dlEventBasedFanr
2-1757
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
event-based FANR
3GPP Reference
3GPP TS 44.060
This parameter is issued to MS in packet downlink assignment, indicating
whether MS uses event-based FANR. That is, upon detecting that the
downlink block is lost or in disorder, the MS actively carries the bitmap
Description
message of downlink block in the uplink radio block data.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.10 Enable reduced latency access

Full Name
Enable reduced latency access
Abbreviation
RttiAccess
2-1758
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.060
This parameter is broadcast to the MS through tSI13/PSI13, indicating
Description
the MS whether to use RTT to access.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
It is a newly added function in the protocol and disabled by default.
Enable this function if FANR function needs to be provided on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.41.11 Encoding mode of PAN in uplink TBF

Full Name
Encoding mode of PAN in uplink TBF
Abbreviation
ulPanEncodingMode
Managed Object
3GPP Name
N/A
2-1759
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter is issued to MS in packet uplink assignment, indicating
whether uplink TBF uses SSN-based encoding. That is, the received
bitmap uses the format similar to the received block bitmap format in the
Description
downlink acknowledgment message.
Instance
Cell
0: SSN-based encoding
1: time-based encoding
Unit
N/A
Default Value
Default Value
only implement encode based on SSN
Currently, this parameter is always 0 and does
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

EDGE Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.42 Serving Cell CRRM Configuration (GCrrmCellLd)

2.42.1 Serving Cell CRRM Configuration ID
Full Name
Serving Cell CRRM Configuration ID
Abbreviation
GCrrmCellLd
2-1760
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Serving Cell CRRM Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Serving Cell CRRM Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Serving Cell CRRM Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1761
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the threshold for GSM to judge whether the upDescription
link load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
balancing policy. When GSM load is not high and GSM is expected to
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold for GSM to judge whether the up-
Description
link load of the local serving cell is mediocre.
Instance
BSC
2-1762
SJ-20130408140048-016|2013-07-17(R1.0)
1..100
Unit
Default Value
50
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link load of the local serving cell is high.
Instance
BSC
1..100
Unit
2-1763
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold for GSM to judge whether the
Description
downlink load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
2-1764
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
downlink load of the local serving cell is mediocre.
Instance
BSC
1..100
Unit
Default Value
50
Default Value
general value
2-1765
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
downlink load of the local serving cell is high.
Instance
BSC
1..100
Unit
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
2-1766
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link real-time load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1767
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link real-time load of the local serving cell is mediocre.
Instance
BSC
1..100
Unit
Default Value
50
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1768
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link real-time load of the local serving cell is high.
Instance
BSC
1..100
Unit
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1769
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
downlink real-time load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1770
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
downlink real-time load of the local serving cell is mediocre.
Instance
BSC
1..100
Unit
Default Value
50
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1771
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
downlink real-time load of the local serving cell is high.
Instance
BSC
1..100
Unit
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1772
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
ulNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link non-real-time load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
2-1773
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
ulNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link non-real-time load of the local serving cell is mediocre
Instance
BSC
1..100
Unit
Default Value
50
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
ulNRtLoadHighThs
Managed Object
2-1774
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
link non-real-time load of the local serving cell is high.
Instance
BSC
1..100
Unit
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadLowThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1775
SJ-20130408140048-016|2013-07-17(R1.0)
Description
downlink non-real-time load of the local serving cell is low.
Instance
BSC
1..100
Unit
Default Value
20
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadMidThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link non-real-time load of the local serving cell is mediocre.
Instance
BSC
2-1776
SJ-20130408140048-016|2013-07-17(R1.0)
1..100
Unit
Default Value
50
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
dlNRtLoadHighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
link non-real-time load of the local serving cell is high.
Instance
BSC
1..100
Unit
2-1777
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
80
Default Value
general value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.43 SubCell (GSubCell)

2.43.1 SubCell ID
Full Name
SubCell ID
Abbreviation
GSubCell
Managed Object
SubCell
3GPP Name
N/A
3GPP Reference
N/A
Description
SubCell ID
Instance
None
1..2
Unit
N/A
Default Value
NA
2-1778
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->SubCell
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.43.2 SubCell Sequence

Full Name
SubCell Sequence
Abbreviation
GSubCellSeq
Managed Object
SubCell
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the subcell sequence.
Instance
Cell
1..2
Unit
N/A
Default Value
Default Value
CoBCCH is not used by default.

Create sub-cell 2 by using a cell with the CoBCCH structure.
2-1779
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.43.3 Frequency Band of SubCell

Full Name
Frequency Band of SubCell
Abbreviation
subFreqBand
Managed Object
SubCell
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the frequency band of subcells.
Instance
Cell
0: GSM900\(1..124\)(GSM900\(1..124\))
1: EGSM900\(0 .. 124, 975 .. 1023\)(EGSM900\(0 .. 124, 975 .. 1023\))
2: DCS1800\(512 .. 885\)(DCS1800\(512 .. 885\))
4: PCS1900\(512 .. 810\)(PCS1900\(512 .. 810\))
7: GSM850\(128..251\)(GSM850\(128..251\))
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
2-1780
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
If "Subcell used" is set to "Yes", this parameter can be configurable.
Relationship
The value of DCS1800/PCS1900 supported (FuncExt) has influence on

the value range of this parameter.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44 Subcell Handover Control (GScHandoverControl)

2.44.1 COBCCH Handover Control ID
Full Name
COBCCH Handover Control ID
Abbreviation
GScHandoverControl
Managed Object
Subcell Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
COBCCH Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
2-1781
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Subcell Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.2 PBGT handover start threshold of subcell2

Full Name
PBGT handover start threshold of subcell2
Abbreviation
PbgtHoStartThsSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the MS operates in the subcell 2, PBGT handover decision is mde
until the donwlink level of the current cell s lower than the start level thresh-
Description
old for PBGT handover decision.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value

Set this parameter to a low value if unnecessary handovers need to be
reduced. Set this parameter to a high value if timely handovers are
required.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1782
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.44.3 FR to AMRHR handover load threshold of subcell2

Full Name
FR to AMRHR handover load threshold of subcell2
Abbreviation
FrToAmrHrHoLoadThSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the load of the subcell 2 reaches a certain level, FR->HR(V3) handover needs to be initiated, to obtain more channel resources and improve
system capacity. This parameter indicates the load threshold for initiating
FR->HR(V3) handover. This parameter value should be greater than or
equal to FrToHrHoLoadThrSC2. The load is calculated as follows: Load =
number of busy channels in the subcell * 100 / (number of busy channels
Description
in the subcell + number of idle channels in the subcell)
Instance
Cell
20..100
Unit
Default Value
80
Default Value
When the second sub-cell load reaches 80%, it is regarded as busy and
can perform an FR-to-HR(V3) handover to improve system capacity.
2-1783
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is validated when FRTHRHOSupport is enabled in the

cell.
A greater value indicates that heavier load is required for the second
sub-cell to initiate an FR-to-HR(V3) handover, which leads to less

opportunities.
A lower value indicates that lower load is required for the second sub-cell
to initiate an FR-to-HR(V3) handover, which leads to more opportunities.
If the parameter is set too low, the times of intra-cell handovers in the
second sub-cell are improved.
Change Mode
Offline
Related features
Related Parameters
FrToHrHoLoadThrSC2
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.44.4 The load of HO from FR to HR(V1) in subcell2

Full Name
The load of HO from FR to HR(V1) in subcell2
Abbreviation
FrToHrHoLoadThrSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
When the load of the subcell 2 reaches a certain level, FR->HR(V1) handover needs to be initiated, to obtain more channel resources and improve
system capacity. This parameter indicates the load threshold for initiating FR->HR(V1) handover. This parameter value should be greater than
or equal to FrToAmrHrHoLoadThSC2. The load is calculated as follows:
Load = number of busy channels in the subcell * 100 / (number of busy
Description
channels in the subcell + number of idle channels in the subcell)

2-1784
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
20..100
Unit
Default Value
90
Default Value
When the second sub-cell load reaches 90%, it is regarded as busy and
can perform an FR-to-HR(V1) handover to improve system capacity.

This parameter is validated when FRTHRHOSupport is enabled in the
cell.
A greater value indicates that heavier load is required for the second

sub-cell to initiate an FR-to-HR(V1) handover, which leads to less

opportunities.
A lower value indicates that lower load is required for the second sub-cell
to initiate an FR-to-HR(V1) handover, which leads to more opportunities.
If the parameter is set too low, the times of intra-cell handovers in the
second sub-cell are improved.
Change Mode
Offline
Related features
Related Parameters
FrToAmrHrHoLoadThSC2
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.44.5 SubCell handover algorithm(High Speed)

Full Name
SubCell handover algorithm(High Speed)
Abbreviation
hoControlScHoOpt_H
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1785
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates two handover modes of inter-subcell handover

algorithm in the case of high speed: One is based on C/I, and the other
Description
is based on path loss and TA.
Instance
Cell
0: Concentric handover
1: Handover based on path loss and TA
Unit
N/A
Default Value
Default Value

It is recommended that the handover mode be
changed to handover based on path loss and TA. Currently, this
handover
algorithm is widely used for COBCCH handovers on site.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.44.6 SubCell handover algorithm(Middle Speed)

Full Name
SubCell handover algorithm(Middle Speed)
Abbreviation
hoControlScHoOpt_M
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1786
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates two handover modes of inter-subcell handover

algorithm in the case of medium speed: One is based on C/I, and the
Description
other is based on path loss and TA.
Instance
Cell
Unit
N/A
Default Value
Default Value

handover
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.615b
Parameter Modifying
Detail
New
2.44.7 SubCell handover algorithm(Low Speed)

Full Name
SubCell handover algorithm(Low Speed)
Abbreviation
hoControlScHoOpt_L
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1787
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates two handover modes of subcell handover algoDescription
rithm: One is based on C/I, and the other is based on path loss and TA.
Instance
Cell
Unit
N/A
Default Value
Default Value

handover
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.8 The MAX of path loss

Full Name
The MAX of path loss
Abbreviation
pathLossMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-1788
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is one of the subcell handover parameters and is the

maximum threshold for path loss. During assignment, if byPathLoss
PathLossMin and TASubCellTAMin, select the channel in the subcell
2 with priority. If byPathLossPathLossMin or TASubCellTAMin, only
select the channel in the subcell 1. During handover, if the current
call is in the subcell 1, the TA value is smaller than the SubCellTAMin
threshold set by cell parameters. Meanwhile, the path loss calculated
by the downlink level is lower than the PathLossMin threshold set
by cell parameters. That is, byPathLossPathLossMin and TA
SubCellTAMin. If SubCellP in SubCellN satisfies byPathLoss
PathLossMin and TASubCellTAMin, and the MS supports the
frequency band of subcell 2, handover to the subcell can be performed
from subcell 1 to subcell 2.
If the current call is in the subcell 2, and SubCellN PathLoss
and SubCellP in TA values satisfy PathLossPathLossMax or
TASubCellTAMax, path loss ls made and TA handover is performed
Description
from subcell 2 to subcell 1.
Instance
Cell
0..150
Unit
dB
Default Value
126
Default Value

to initiate handover from subcell 2 to subcell 1 due to pass loss,
and vice versa it is easier.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1789
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.44.9 The MIN of path loss

Full Name
The MIN of path loss
Abbreviation
pathLossMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is one of the subcell handover parameters. It is the mini-
Description
mum path loss.For its description, refer to PathLossMax.
Instance
Cell
0..150
Unit
dB
Default Value
120
Default Value

The larger the value is, it is easier to initiate
handover in subcell 2 and handover is easier to be performed from
subcell 1 to subcell 2. Otherwise, it is more difficult.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1790
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.10 The MAX of time advance

Full Name
The MAX of time advance
Abbreviation
SubCellTAMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is one of the subcell handover parameters. It is the max-
Description
imum threshold of TA. For its description, refer to PathLossMax.
Instance
Cell
0..63
Unit
N/A
Default Value
63
Default Value

for TA to initiate handover from subcell 2 to subcell 1, and vice
versa it is easier.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.11 The MIN of time advance

Full Name
The MIN of time advance
2-1791
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
SubCellTAMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is one of the subcell handover parameters. It is the mini-
Description
mum threshold of TA. For its description, refer to PathLossMax.
Instance
Cell
0..63
Unit
N/A
Default Value
62
Default Value

The larger the value is, it is easier to initiate
handover in subcell 2 and handover is easier to be performed from
subcell 1 to subcell 2. Otherwise, it is more difficult.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.12 Inter Site handover to SubCell2 permitted

Full Name
Inter Site handover to SubCell2 permitted
Abbreviation
HoToInnerSc
Managed Object
2-1792
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter decides whether it is allowed to perform direct handover
from other sites to the Subcell2 of this cell. Here, other sites include the
Description
sites of external BSC.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
If the subcell is available and it is better

for the subcell 2 to share more traffic, this function should be

enabled.After
this function is enabled, capability of absorbing traffic of the subcell
2 can be enhanced, but handover success rate will be influenced.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.13 Measure BCCH when in subcell2

Full Name
Measure BCCH when in subcell2
Abbreviation
SubCell2MeasureBcch
2-1793
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If this parameter is configured to "Yes", the system adds a BCCH frequency point for broadcasting this cell in the SACCH system message
of the subcell 2. After the MS reports measurement reports, the system
collects statistics on the sampling distribution of level difference between
the subcell 1 and the subcell 2. If the MR function is enabled, the system
Description
reports the level difference in the MR.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Enable this function according to operator
requirements or network optimization requirements.
Enable this function according to operator
requirements or network optimization requirements.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.44.14 Good C/I

Full Name
Good C/I
2-1794
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
goodCiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the system uses concentric handover, handover judgement happens
after a series of the average values is obtained.
The judgement process is discribed as follows: the current call is on the
common TRX(frequency), if there is P fulfil the condition in the latest N
average values, handover should happen and the reason is Good C/I.
Handover happens from common TRX to the special TRX.
GoodCiThs defines the value of the related threshold , GoodCiN defines
Description
the related N value, and GoodCiP defines the related P value.
Instance
Cell
0..255
Unit
N/A
Default Value
133
Default Value

This parameter is valid till the system is

configured as concentric structure and employs the handover algorithm

based on C/I. The smaller the value is, the easier it is to satisfy
handover requirements. Otherwise, it is more difficult to satisfy
the handover requirements.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1795
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.15 Good value P

Full Name
Good value P
Abbreviation
goodCiP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1796
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.44.16 Good value N

Full Name
Good value N
Abbreviation
goodCiN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1797
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.17 Bad C/I

Full Name
Bad C/I
Abbreviation
badCiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
after a series of the average values is obtained. The C/I of the frequency
of the current special layer is one of the causes for concentric handover.
special TRX(frequency), if there is P fulfil the condition in the latest N
average values of C/I, handover should happen and the reason is Bad
C/I. Handover happens from special TRX to the common TRX.
BadCiThs defines the value of the related threshold , BadCiN defines
Description
the related N value, and BadCiP defines the related P value.
Instance
Cell
0..255
Unit
N/A
Default Value
130
Default Value



Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1798
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.18 Bad value P

Full Name
Bad value P
Abbreviation
badCiP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value



2-1799
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.19 Bad value N

Full Name
Bad value N
Abbreviation
badCiN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value

2-1800
SJ-20130408140048-016|2013-07-17(R1.0)


Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.20 Handover Parameter N of SubCell1

Full Name
Handover Parameter N of SubCell1
Abbreviation
SubCell1N
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used for inter-subcell handover decision. For details,
Description
refer to the description of PathLossMax.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
Empirical value in normal radio environment
2-1801
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used in combination with the Handover Parameter P
of SubCell1. A greater P/N indicates a stricter handover requirement.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.21 Handover Parameter P of SubCell1

Full Name
Handover Parameter P of SubCell1
Abbreviation
SubCell1P
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used for inter-subcell handover decision. For details,
Description
refer to the description of PathLossMax.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
Empirical value in normal radio environment
This parameter is used in combination with the Handover Parameter N
of SubCell1. A greater P/N indicates a stricter handover requirement.
Change Mode
Offline
2-1802
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.22 Handover Parameter N of SubCell2

Full Name
Handover Parameter N of SubCell2
Abbreviation
SubCell2N
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the N value of subcell2 handover parameter.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
To guarantee stable and reliable handover decision

Set a lower value if a quicker handover decision is required.
Change Mode
Offline
Related features
Related Parameters
SubCell2P
Relationship
SubCell2N>=SubCell2P
Related Interfaces
N/A
2-1803
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.23 Handover Parameter P of SubCell2

Full Name
Handover Parameter P of SubCell2
Abbreviation
SubCell2P
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the P value of subcell2 handover parameter.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
To guarantee stable and reliable handover decision

Set a lower value if a quicker handover decision is required.
Change Mode
Offline
Related features
Related Parameters
SubCell2N
Relationship
SubCell2N>=SubCell2P
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1804
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.24 SubCell2 To SubCell1 Handover Threshold

Full Name
SubCell2 To SubCell1 Handover Threshold
Abbreviation
SubCellHoDLThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter sets the level threshold of handovers between subcells.
Instance
Cell
0:< -110dBm
1:-110~-109 dBm
2:-109~-108dBm
3:-108~-107dBm
4:-107~-106dBm
5:-106~-105dBm
6:-105~-104dBm
7:-104~-103dBm
8:-103~-102dBm
9:-102~-101dBm
10:-101~-100dBm
11:-100~-99dBm
12:-99~-98dBm
13:-98~-97dBm
14:-97~-96dBm
15:-96~-95dBm
16:-95~-94dBm
17:-94~-93dBm
18:-93~-92dBm
19:-92~-91dBm
20:-91~-90dBm
21:-90~-89dBm
22:-89~-88dBm
23:-88~-87dBm
2-1805
SJ-20130408140048-016|2013-07-17(R1.0)
24:-87~-86dBm
25:-86~-85dBm
26:-85~-84dBm
27:-84~-83dBm
28:-83~-82dBm
29:-82~-81dBm
30:-81~-80dBm
31:-80~-79dBm
32:-79~-78dBm
33:-78~-77dBm
34:-77~-76dBm
35:-76~-75dBm
36:-75~-74dBm
37:-74~-73dBm
38:-73~-72dBm
39:-72~-71dBm
40:-71~-70dBm
41:-70~-69dBm
42:-69~-68dBm
43:-68~-67dBm
44:-67~-66dBm
45:-66~-65dBm
46:-65~-64dBm
47:-64~-63dBm
48:-63~-62dBm
49:-62~-61dBm
50:-61~-60dBm
51:-60~-59dBm
52:-59~-58dBm
53:-58~-57dBm
54:-57~-56dBm
55:-56~-55dBm
56:-55~-54dBm
57:-54~-53dBm
58:-53~-52dBm
59:-52~-51dBm
60:-51~-50dBm
61:-50~-49dBm
62:-49~-48dBm
63:> -48dBm
Unit
N/A
Default Value
25
2-1806
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The level to ensure proper operation of a cell
Set a higher threshold if the QoS is not improved after the handover to
sub-cell 1.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.25 The load of HO from HR(V1) to FR for Subcell2

Full Name
The load of HO from HR(V1) to FR for Subcell2
Abbreviation
HrToFrHoLoadThrSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Load (low threshold) of the subcell2 that triggers an HR (V1)-FR handover.
Instance
Cell
0..100
Unit
Default Value
30
Default Value
full rate mode can be applied to improve the user experience.
2-1807
SJ-20130408140048-016|2013-07-17(R1.0)
After a handover to the FR mode, the load on the current channel is

increased, and it is possible to reach the load threshold triggering a

value that can not only improve the user experience, but also
avoid frequent handovers.
Change Mode
Offline
Related features
Related Parameters
AmrHrToFrHoLoadThSC2
Relationship
AmrHRThs >HrToFrHoLoadThrSC2> =AmrHrToFrHoLoadThSC2

FrToHrHoLoadThrSC2> HrToFrHoLoadThrSC2
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Load (low threshold) of the subcell2 that triggers an HR (V3)-FR handover.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
AMR full rate mode can be applied to improve the user experience.
2-1808
SJ-20130408140048-016|2013-07-17(R1.0)
After a handover to the AMR FR mode, the load on the current channel
is increased, and it is possible to reach the load threshold triggering a

frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HrToFrHoLoadThrSC2
Relationship
AmrHRThs >HrToFrHoLoadThrSC2>= AmrHrToFrHoLoadThSC2

FrToAmrHrHoLoadThSC2> AmrHrToFrHoLoadThSC2
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
An HR(V3)->FR handover is triggered when the load on subcell 2 decreases
to a certain point to improve voice quality. This parameter specifies the load
threshold for a cell to trigger an HR(V3)->FR handover. If the load is lower
than this threshold, priority is given to an HR(1)->FR handover, and the next
Description
to an HR(V3)->FR handover.
Instance
Cell
0..100
Unit
Default Value
20
2-1809
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The default value is determined by user experience and channel load. For
example, if the load on a channel is lower than 20, the AMR FR mode can
be applied to improve user experience.
After a handover to AMR FR mode, the load on the current channel

is increased, but it is possible to reach the load threshold triggering a

handover to dynamic HR mode. Therefore, this parameter must be set
to a value that can not only improve user experience, but also avoid
frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HrToFrHoLoadThrSC2
Relationship
AmrHRThs >HrToFrHoLoadThrSC2>= AmrHrToFrHoLoadThSC2,

FrToAmrHrHoLoadThSC2> AmrHrToFrHoLoadThSC2
Related Interfaces
N/A
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.28 Bad C/I for assignment

Full Name
Bad C/I for assignment
Abbreviation
AssBadCiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the Bad C/I threshold for subcell assignment and
Description
can be set separately from the handover threshold.
Instance
Cell
0..255
Unit
N/A
2-1810
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
130
Default Value
Consistent with the default value of the parameter badCiThs

This parameter is reserved for future use.
Change Mode
Offline
Related features
ZGB-02-02-002 Dynamic Handover Priority Algorithm
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.29 Good C/I for assignment

Full Name
Good C/I for assignment
Abbreviation
AssGoodCiThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the Good C/I threshold for subcell assignment and
Description
Instance
Cell
0..255
Unit
N/A
Default Value
133
Default Value
Consistent with the default value of the parameter goodCiThs

2-1811
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter should be decreased if more traffic is expected to be

assigned to subcell 2. Otherwise, it should be increased. However, this
parameter should not be set too high if there are a small number of
channels available in subcell 2.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.30 The MAX of path loss for assignment

Full Name
The MAX of path loss for assignment
Abbreviation
AssPathLossMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the maximum path loss for subcell assignment and
Description
Instance
Cell
0..150
Unit
N/A
Default Value
126
Default Value
Consistent with the default value of the parameter pathLossMax
2-1812
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is not used in view of the three-stage algorithm for subcell
assignment if there is no subsequent assignment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.31 The MIN of path loss for assignment

Full Name
The MIN of path loss for assignment
Abbreviation
AssPathLossMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the minimum path loss for subcell assignment and
Description
Instance
Cell
0..150
Unit
N/A
Default Value
120
Default Value
Consistent with the default value of the parameter pathLossMin

This parameter should be increased if more traffic is expected to be
assigned to subcell 2. Otherwise, it should be decreased. However,
this parameter should not be set too high if there are a small number of
2-1813
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.32 The MAX of time advance for assignment

Full Name
The MAX of time advance for assignment
Abbreviation
AssSubCellTAMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the maximum TA threshold for subcell assignment
Description
and can be set separately from the handover threshold.
Instance
Cell
0..63
Unit
N/A
Default Value
63
Default Value
Consistent with the default value of the parameter SubCellTAMax
This parameter is not used in view of the three-stage algorithm for subcell
assignment if there is no subsequent assignment.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1814
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.33 The MIN of time advance for assignment

Full Name
The MIN of time advance for assignment
Abbreviation
AssSubCellTAMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
and can be set separately from the handover threshold.
Instance
Cell
0..63
Unit
N/A
Default Value
62
This parameter specifies the minimum TA threshold for subcell assignment
Default Value
Consistent with the default value of the parameter SubCellTAMin

This parameter should be increased if more traffic is expected to be
assigned to subcell 2. Otherwise, it should be decreased. However,
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1815
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
HrToFrHoLoadThrSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
An HR(V1)->FR handover is triggered when the load on subcell 2 decreases
to a certain point to improve voice quality. This parameter specifies the load
Description
threshold for a cell to trigger an HR(V1)->FR handover.
Instance
Cell
0..100
Unit
Default Value
30
Default Value
example, if the load on a channel is lower than 30, the FR mode can be
applied to improve user experience.
After a handover to FR mode, the load on the current channel is increased,
but it is possible to reach the load threshold triggering a handover to
dynamic HR mode. Therefore, this parameter must be set to a value that

can not only improve user experience, but also avoid frequent handovers.
Change Mode
Offline
Related features
Related Parameters
Relationship
AmrHRThs >HrToFrHoLoadThrSC2> =AmrHrToFrHoLoadThSC2,

FrToHrHoLoadThrSC2> HrToFrHoLoadThrSC2
2-1816
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.35 Traffic High Load Threshold of SubCell1

Full Name
Traffic High Load Threshold of SubCell1
Abbreviation
SC1HighLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the high load threshold of subcell 1.
If priority is given to channel allocation to subcell 1 (SubCellAssign=0,
CSAllocSC=1) during assignment, channels are allocated as follows:
(1) If the value of TA/path loss (or C/I) does not qualify for channel
allocation to subcell 2, channels are allocated only to subcell 1;
(2) If the value of TA/path loss (or C/I) qualifies for channel allocation to
subcell 2, and the load on subcell 1 is lower than SC1HighLoadThs,
priority is given to channel allocation to subcell 1;
subcell 2, the load on subcell 1 is higher than SC1HighLoadThs, while
the load on subcell 2 is lower than SC2HighLoadThs, priority is given
to channel allocation to subcell 2;
(4) If the value of TA/path loss (or C/I) qualifies for channel allocation
to subcell 2, and the loads of subcell 1 and subcell 2 are higher than
SC1HighLoadThs and SC2HighLoadThs respectively, priority is given
to channel allocation to subcell 1.
Description
2-1817
SJ-20130408140048-016|2013-07-17(R1.0)
subcell 2, the load of subcell 1 is lower than SC1HighLoadThs, while
the load on subcell 2 is higher than SC2HighLoadThs, priority is given
Instance
Cell
0..100
Unit
N/A
Default Value
70
Default Value
The value of 70 is considered to be comparatively high for a traffic load.

This parameter should be increased if more subscribers are expected to
be assigned to subcell 1. Otherwise, it should be decreased. However,
Change Mode
Offline
Related features
N/A
Related Parameters
SC1HoOutLoadThs SC1HoInLoadThs
Relationship
SC1HoOutLoadThs>=SC1HighLoadThs>=SC1HoInLoadThs
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1818
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.36 Traffic Threshold of Handover in SubCell1

Full Name
Traffic Threshold of Handover in SubCell1
Abbreviation
SC1HoInLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the traffic threshold of an incoming handover to
subcell 1. If the inter-subcell load balance function is enabled (UseLoadBalance=1), it is necessary to verify whether the load on subcell 1 is not
higher than this threshold for an incoming handover to subcell 1 from sub-
Description
cell 2.
Instance
Cell
0..100
Unit
N/A
Default Value
50
Default Value
The value of 50% is considered as a comparatively low load for an
incoming handover.

Change Mode
Offline
Related features
N/A
Related Parameters
SC1HighLoadThs SC1HoOutLoadThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1819
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.37 Traffic Threshold of Handover out SubCell1

Full Name
Traffic Threshold of Handover out SubCell1
Abbreviation
SC1HoOutLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the traffic threshold of an outgoing handover from
subcell 1. If the inter-subcell load balance function is enabled (UseLoadBalance=1), the load on subcell 1 is higher than SC1HoOutLoadThs, while
the load on subcell 2 is lower than SC2HoInLoadThs, the subscriber with
the minimum path loss (or the maximum C/I) in subcell 1 is selected to be
Description
handed over to subcell 2.
Instance
Cell
0..100
Unit
N/A
Default Value
85
Default Value
The value of 85% is considered as a comparatively high load for an
outgoing handover.
Change Mode
Offline
Related features
N/A
Related Parameters
SC1HighLoadThs SC1HoInLoadThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1820
SJ-20130408140048-016|2013-07-17(R1.0)
2.44.38 Traffic High Load Threshold of SubCell2

Full Name
Traffic High Load Threshold of SubCell2
Abbreviation
SC2HighLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the high load threshold of subcell 1.
subcell 2, the load on subcell 1 is higher than SC1HighLoadThs, while
the load on subcell 2 is lower than SC2HighLoadThs, priority is given
subcell 2, the load of subcell 1 is lower than SC1HighLoadThs, while
the load on subcell 2 is higher than SC2HighLoadThs, priority is given
Description
Instance
Cell
0..100
Unit
N/A
Default Value
70
2-1821
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The value of 70 is considered to be comparatively high for a traffic load.
be assigned to subcell 2. Otherwise, it should be decreased.
Change Mode
Offline
Related features
N/A
Related Parameters
SC2HoOutLoadThs SC2HoInLoadThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.39 Traffic Threshold of Handover in SubCell2

Full Name
Traffic Threshold of Handover in SubCell2
Abbreviation
SC2HoInLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the traffic threshold of an incoming handover to
subcell 2. If the inter-subcell load balance function is enabled (UseLoadBalance=1), it is necessary to verify whether the load on subcell 2 is not
higher than this threshold for an incoming handover to subcell 2 from sub-
Description
cell 1.
Instance
Cell
0..100
Unit
N/A
Default Value
50
2-1822
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The value of 50% is considered as a comparatively low load for an
incoming handover.
Change Mode
Offline
Related features
N/A
Related Parameters
SC2HighLoadThs SC2HoOutLoadThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.40 Traffic Threshold of Handover out SubCell2

Full Name
Traffic Threshold of Handover out SubCell2
Abbreviation
SC2HoOutLoadThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the traffic threshold of an outgoing handover from
subcell 1. If the inter-subcell load balance function is enabled (UseLoadBalance=1), the load on subcell 2 is higher than SC2HoOutLoadThs, while the
load on subcell 1 is lower than SC1HoInLoadThs, the subscriber with the
maximum path loss (or the minimum C/I) in subcell 2 is selected be handed
Description
over to subcell 1.
Instance
Cell
0..100
Unit
N/A
Default Value
85
2-1823
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The value of 85% is considered as a comparatively high load for an
outgoing handover.
Change Mode
Offline
Related features
N/A
Related Parameters
SC2HighLoadThs SC2HoInLoadThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.44.41 Use Load Balance

Full Name
Use Load Balance
Abbreviation
UseLoadBalance
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies whether the inter-subcell load balance policy is
used. If this policy is used, the load on a subcell is involved in channel
Description
assignment and triggers inter-subcell handover.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
The inter-subcell load balance policy mainly caters to the needs of China
Mobile's subscribers for dual-frequency and co-cell currently.
2-1824
SJ-20130408140048-016|2013-07-17(R1.0)

Load balance is generally enabled only for China Mobile's networks.
Change Mode
Offline
Related features
N/A
Related Parameters
CSAllocSC
Relationship
This parameter must also be set to 1 if the parameter CSAllocSC is set to

1 (priority is given to channel allocation to subcell 1).
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45 SubCell PS Channel Allocation Configuration

(GSubCellPsAlloc)
2.45.1 SubCell PS Channel Allocation Configuration ID
Full Name
SubCell PS Channel Allocation Configuration ID
Abbreviation
GSubCellPsAlloc
Managed Object
SubCell PS Channel Allocation Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
SubCell PS Channel Allocation Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None
2-1825
SJ-20130408140048-016|2013-07-17(R1.0)

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->SubCell PS Channel Allocation Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.2 SubCell selection of PS channel allocation

Full Name
SubCell selection of PS channel allocation
Abbreviation
psAllocSc
Managed Object
3GPP Name
None
3GPP Reference
N/A
After one subcell is configured, user can control the subcell selection
strategy by this parameter. The strategy includes preferring the first
subcell, preferring the second subcell, and only selecting the first
subcell. Setting of this parameter affects the parameter strategy when
the control plane applies for channels to the database. In accordace
with the parameter strategy, the user plane determines to uise which
strategy.The strategy is described as follows:
Only selecting the first subcell: The parameter strategy sent from
the control plane to the database can only be the first subcell. This
parameter should be configured if the current network only needs the
first subcell to support PS services.
Preferring the first subcell: When the user can camp either on the first
Description
subcell or the second subcell (determined by the level and TA value),
2-1826
SJ-20130408140048-016|2013-07-17(R1.0)
the allocation strategy transmitted to the database is preferring the

second subcell.
The principle for the databse to allocate these three parameters is as
follows:
Only selecting the first subcell: PS services can only be allocated to the
channel of the first subcell with no repect to any channel of the second
subcell.
Preferring the first subcell: PS services are preferentially allocated to the
first subcell until the number of PFC users is unsatisfied or the number
of available channels in the first subcell is inadequate.
Preferring the second subcell: PS services are preferentially allocated to
the second subcell until the number of PFC users is unsatisfied or the
number of available channels in the first subcell is inadequate.
Instance
Cell
0: Prefer subcell 1
1: Prefer subcell 2
2: Only subcell 1
Unit
N/A
Default Value
Default Value
The first subcell aborbs PS traffic by default,
so PS channels are preferentially allocated in the first subcell.

If the PS channels that can be used are configured only for the first

subcell, this parameter can be adjusted as "the first subcell only".

If congestion occurs to the PS service in the first subcell on site, and
the PS channels in the second subcell are idle, this parameter can be
adjusted as " the second subcell preferred".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1827
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.45.3 RXLEV threshold in SubCell 1

Full Name
RXLEV threshold in SubCell 1
Abbreviation
rxLevThs1
Managed Object
3GPP Name
None
3GPP Reference
N/A
After subcell is configured, this parameter is used to control the level
threshold for selecting the first subcell. When PS channel is in the
second subcell, if the level is smaller than PSALLOCSC_1 and TA is
larger than PagBlkRes, then it is necessary to move to the first subcell.
If the channel allocation strategy configured at the background is
preferring the second subcell, apply for the channel that reselects
preferring the first subcell to the databse.
preferring the first subcell, apply for the channel that reselects preferring
Description
the first subcell to the databse
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
The default value is dependent upon the actual
request on site.

The value can be adjusted in accordance with

the actual on-site condition. If the PS traffic in the first subcell
is considered as too much, increase the value appropriately.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
This parameter is valid only when the parameter
Relationship
PSALLOCSC_0 is configured as the second subcell preferred or the first

subcell preferred.
Related Interfaces
Um
Impact on Equipment
2-1828
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.4 RXLEV threshold in SubCell 2

Full Name
RXLEV threshold in SubCell 2
Abbreviation
rxLevThs2
Managed Object
3GPP Name
None
3GPP Reference
N/A
After subcell is configured, this parameter is used to control the level
threshold for selecting the second subcell. When PS channel is in the
first subcell, if the level is smaller than PSALLOCSC_1 and TA is larger
than PagBlkRes, then it is necessary to move to the first subcell.
preferring the second subcell, apply for the channel that reselects
preferring the first subcell to the databse.
preferring the first subcell, apply for the channel that reselects preferring
Description
the first subcell to the databse.
Instance
Cell
0..63
Unit
N/A
Default Value
40
Default Value
The default value is dependent upon the actual
request on site.

The value can be adjusted in accordance with

the actual on-site condition. If the PS traffic in the second subcell
is considered as too much, increase the value appropriately.
Change Mode
Offline
Related features
N/A
2-1829
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
This parameter is valid only when the parameter
Relationship
PSALLOCSC_0 is configured as the second subcell preferred or the first

subcell preferred.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.5 RxLev P Value

Full Name
RxLev P Value
Abbreviation
RxLevP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the P value of the level after subcell handover
judgment. If P out of N signal strengths meet this threshold, handover is
Description
required.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
general value
This value of this parameter affects the sensitivity
of subcell judgment. The larger the value of this parameter, the lower
the sensitivity. Usually, it is recommended that the value of this

parameter be not modified.
Change Mode
Offline
2-1830
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.6 RxLev N Value

Full Name
RxLev N Value
Abbreviation
RxLevN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the N value of the level after subcell handover
judgment. If P out of N signal strengths meet this threshold, handover is
Description
required.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
general value

Change Mode
Offline
Related features
N/A
2-1831
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.7 TA threshold for PS channel allocate in SubCell1

Full Name
TA threshold for PS channel allocate in SubCell1
Abbreviation
TaLevelThs1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the minimum TA threshold when the channel is
allocated on the first subcell.
When the TA value is higher than this threshold, the channel will be
Description
allocated to the first subcell.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
according to general subcell coverage area

harder the operation of allocating the channel to the first subcell.
When the coverage of the second subcell is good, it is required to

properly increase this value. Otherwise, decrease this value.
Change Mode
Offline
Related features
N/A
2-1832
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.8 TA threshold for PS channel allocate in SubCell2

Full Name
TA threshold for PS channel allocate in SubCell2
Abbreviation
TaLevelThs2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum TA threshold when the channel
is allocated on the second subcell.
When the TA value is lower than this threshold, the channel will be
Description
allocated to the second subcell.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
according to general subcell coverage area
harder the operation of allocating the channel to the second subcell.
When the coverage of the second subcell is good, it is required to
properly increase this value. Otherwise, decrease this value.

Change Mode
Offline
Related features
N/A
2-1833
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.9 TA P Value
Full Name
TA P Value
Abbreviation
TaP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
P out of N TA values meet this threshold, handover is required.
Instance
Cell
0..31
Unit
N/A
Default Value
This parameter indicates the TAP value for subcell handover judgment. If
Default Value
general value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
2-1834
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.10 TA N Value
Full Name
TA N Value
Abbreviation
TaN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
If P out of N TA values meet this threshold, handover is required.
Instance
Cell
0..31
Unit
N/A
Default Value
This parameter indicates the TA N value for subcell handover judgment.
Default Value
general value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
None
Related Interfaces
N/A
Impact on Equipment
0
2-1835
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.11 SubCell1 PS Busy Threshold

Full Name
SubCell1 PS Busy Threshold
Abbreviation
SubCell1PsChanThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the busyness threshold of the first subcell. When
the channel busyness of the first subcell exceeds this threshold, the sys-
Description
tem triggers reselection to the second subcell.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
general value

according to the actual network operation. To hope that the load in

the first subcell is not excessively high, it is required to properly
lower the busyness threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell1HighThs
SubCell1InThs
Relationship
SubCell1PsChanThs>=SubCell1HighThs>= SubCell1InThs
Related Interfaces
N/A
Impact on Equipment
2-1836
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.12 SubCell2 PS Busy Threshold

Full Name
SubCell2 PS Busy Threshold
Abbreviation
SubCell2PsChanThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the busyness threshold of the second subcell.
When the channel busyness of the second subcell exceeds this threshold,
Description
the system triggers reselection to the first subcell.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
general value

according to the actual network operation. To hope that the load in

the second subcell is not excessively high, it is required to properly
lower the busyness threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell2HighThs
SubCell2InThs
Relationship
SubCell2PsChanThs>=SubCell2HighThs> =SubCell2InThs
Related Interfaces
N/A
Impact on Equipment
2-1837
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
iBSCV6.20.710c
Parameter Modifying
Detail
Update
2.45.13 Band priority based Initial access in CoBcch cell

Full Name
Band priority based Initial access in CoBcch cell
Abbreviation
CoBPriBandAcc
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the initial access in a CoBCCH cell is
based on the priority policy configured by the NMS. If it is set to 0, priority is
given to subcell 1 for the initial access by default (at 900 MHz). If it is set to
1, the initial access is based on the priority policy configured by the NMS,
that is, the frequency band with a high priority configured by the parameter
Description
PSALLOCSC[0] is selected.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Consistent with the previous version (900 MHz for the initial access)
The value of 1 is recommended for the resources at 1800 MHz
(PSALLOCSC[0]=1) to better deal with the PS service.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-1838
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.14 Load banlance indication in CoBcch Cell

Full Name
Load banlance indication in CoBcch Cell
Abbreviation
SubCellLoadBalance
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter enables or disables the load balance algorithm in a
CoBCCH cell. If it is set to 0, the algorithm used by the previous versions
applies to both the initial access and resource adjustment, that is, the
algorithm is based on only the load threshold of subcell 1. If it is set to 1,
a new load balance algorithm is used, which indicates that the load of the
initial access is balanced based on the high load threshold of each subcell,
and the congestion trigger is adjusted based on the incoming and outgoing
Description
load threshold.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
Consistent with the previous version
It is recommended to enable the load balance algorithm to balance the
loads at 900 MHz and 1800MHz.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-1839
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.15 SubCell 1 high load threshold

Full Name
SubCell 1 high load threshold
Abbreviation
SubCell1HighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the high load threshold for the initial access to
Description
subcell 1.
Instance
Cell
0..100
Unit
N/A
Default Value
70
Default Value
It is recommended to set this parameter lower than 80, the suggested
value of the outgoing handover threshold parameter SubCell1PsChanThs.
With certain constrains met, the threshold should be decreased if it is
expected to balance the access load as soon as possible.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell1PsChanThs, SubCell1InThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-1840
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.45.16 SubCell 1 handover in threshold

Full Name
SubCell 1 handover in threshold
Abbreviation
SubCell1InThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold of incoming handover to subcell 1
Description
for resource adjustment.
Instance
Cell
0..100
Unit
N/A
Default Value
40
Default Value
A value lower than SubCell1HighThs is recommended.
expected to balance the resource adjustment load as soon as possible.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell1PsChanThs, SubCell1HighThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
2-1841
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.45.17 SubCell 2 high load threshold

Full Name
SubCell 2 high load threshold
Abbreviation
SubCell2HighThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the high load threshold for the initial access to
Description
subcell 2.
Instance
Cell
0..100
Unit
N/A
Default Value
70
Default Value
It is recommended to set this parameter lower than 80, the suggested
value of the outgoing handover threshold parameter SubCell2PsChanThs.
expected to balance the access load as soon as possible.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell2PsChanThs, SubCell2InThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1842
SJ-20130408140048-016|2013-07-17(R1.0)
2.45.18 SubCell 2 handover in threshold

Full Name
SubCell 2 handover in threshold
Abbreviation
SubCell2InThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold of incoming handover to subcell 2
Description
for resource adjustment.
Instance
Cell
0..100
Unit
N/A
Default Value
40
Default Value
A value lower than SubCell2HighThs is recommended.
expected to balance the resource adjustment load as soon as possible.
Change Mode
Offline
Related features
N/A
Related Parameters
SubCell2PsChanThs, SubCell2HighThs
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1843
SJ-20130408140048-016|2013-07-17(R1.0)
2.46 Power Control (GPowerControl)

2.46.1 Power Control ID
Full Name
Power Control ID
Abbreviation
GPowerControl
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Power Control ID
Instance
None
1..2
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Power Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.2 GSubCell DN
Full Name
GSubCell DN
2-1844
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
refGSubCell
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter references to the subcell DN.
Instance
Cell
None
Unit
N/A
Default Value
NA
Default Value
Sub-cell structure is not used by default.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.3 Uplink level Sample count

Full Name
Uplink level Sample count
Abbreviation
pcUlLevWindow
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1845
SJ-20130408140048-016|2013-07-17(R1.0)
The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description
signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
the correctness of power control decisions. Meanwhile, a handover
should be conducted as early as possible when the uplink level is
Enough number of samples are needed to ensure
weak.
BTS uses the average value of measurement data to avoid adverse
influences caused by abrupt changes in measurement data due to
complex radio transmission.
The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.4 Uplink level Weight

Full Name
Uplink level Weight
Abbreviation
pcUlLevWeight
Managed Object
Power Control
2-1846
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
According to GSM specifications, discontinuous transmission (DTX)
Description
Instance
Cell
1..3
Unit
N/A
Default Value
Default Value
More precise
In the same period, FULL value is calculated from more sampling points
and it is more precise. SUB value is calculated from few sampling points,
so it is less precise. This parameter is not recommended to be modified.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1847
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.5 Downlink level Sample count

Full Name
Downlink level Sample count
Abbreviation
pcDlLevWindow
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the window size (that is, the number of samples)
Description
used to calculate the average value of uplink signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
6
Default Value

weak.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
0
2-1848
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.6 Downlink level Weight

Full Name
Downlink level Weight
Abbreviation
pcDlLevWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
According to GSM specifications, discontinuous transmission (DTX)
Description
Instance
Cell
1..3
Unit
N/A
Default Value
2-1849
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
More precise
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pcUlQualWindow
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
2-1850
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value

weak.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.8 Uplink quality Weight

Full Name
Uplink quality Weight
Abbreviation
pcUlQualWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
data when averaging uplink signal quality for power control.
Description
Weight for the second type of measurement data is set to 1 by default.
Instance
Cell
1..3
2-1851
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
More precise
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pcDlQualWindow
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
signal strength.
Instance
Cell
1..31
Unit
N/A
Default Value
6
2-1852
SJ-20130408140048-016|2013-07-17(R1.0)

Default Value

weak.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.10 Downlink quality Weight

Full Name
Downlink quality Weight
Abbreviation
pcDlQualWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
data when averaging downlink signal quality for power control.
Description
Weight for the second type of measurement data is set to 1 by default.
Instance
Cell
1..3
2-1853
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
More precise
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.11 Uplink power control allowed

Full Name
Uplink power control allowed
Abbreviation
pwrControlUl
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
According to different demands from the network, object for the power
control can be chosen. If the MS transmission power needs to be adjusted
Description
dynamically, enable this parameter Uplink Power Control.
Instance
Cell
0: Off
1: On
Unit
N/A
2-1854
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
1
Adjust the output power of MS to make BTS obtain
the steady receiving signal strength. Therefore, the interference
from the same frequency can be decreased and the power will be saved.
Applicable scenario: decrease uplink interference and MS power
consuming. In environments except for high-speed railway, this function
is recommended to be enabled.
Functions: After the uplink power control is enabled, BTS will obtain the
steady receiving signal strength. Therefore, the uplink interference from
the same frequency can be decreased and the MS power consuming
will be reduced.
Risks: If the uplink power control is not conducted in time, or the
parameter is not configured properly, voice quality problem will be
brought up and call drops will happen.
The initial power control rate for SDR base station is slow. It is
recommended to start fast average (fastavg) function.
Change Mode
Offline
Related features
Related Parameters
FastAvg
Relationship
If fastavg function is enabled, the initial

power control will speed up.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.12 Downlink power control allowed

Full Name
Downlink power control allowed
Abbreviation
pwrControlDl
Managed Object
Power Control
3GPP Name
N/A
2-1855
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
According to different demands from the network, object for the power
control can be chosen. If the BTS transmission power needs to be ad-
Description
justed dynamically, enable this parameter Downlink Power Control.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
BTS transmit with the highest power to ensure
proper coverage and downlink receiving level.

Applicable scenario: decrease downlink interference and BTS power
consuming. This function is recommended to be enabled in the
dense-populated area and places with strong inner network signal
interference.
Functions: After the downlink power control is enabled, an MS will

obtain the steady receiving signal strength. Therefore, the downlink

interference from the same frequency can be decreased and the BTS
power consuming will be reduced.
Risks: If the downlink power control is not conducted in time, or the
parameter is not configured properly, voice quality problem will be
brought up and call drops will happen.
The initial power control rate for SDR base station is slow. It is
recommended to start fast average (fastavg) function.
Change Mode
Offline
Related features
Related Parameters
FastAvg
PwrDynShare
1. Open the fastavg function to speed up the power control;
Relationship
2.If the BTS type is SDR and the "downlink power control"needs to be
enabled, choose "Yes" to make this parameter configurable.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1856
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.46.13 Increase step of uplink power control

Full Name
Increase step of uplink power control
Abbreviation
pwrIncStep
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the power increasing step. It is the value of each
power control variation, and is used in both directions uses this parameter.
In addition, it falls into the following four types: FR, HR, AMR FR, and
Description
AMR HR.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
[1,1,1,1,1,1,1]
Default Value
The principle of quick increase and slow decrease
is followed.
If this parameter is configured too small,

the uplink power increases slowly. As a result, the voice quality

is deteriorated or even call drops occur. Therefore, it is recommended
that the value be not configured too small.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1857
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710e
Parameter Modifying
Detail
Update
2.46.14 Decrease step of uplink power control

Full Name
Decrease step of uplink power control
Abbreviation
pwrRedStep
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the power decreasing step. It is the value of
each power control variation, and is used in both directions uses this parameter. In addition, it falls into the following four types: FR, HR, AMR
Description
FR, and AMR HR.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
dB
Default Value
[0,0,0,0,0,0,0]
Default Value
The principle of quick increase and slow decrease
is followed.


the uplink power may be decreased sharply in some special cases. As
a result, the KPIs such as call drop will be affected.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1858
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710e
Parameter Modifying
Detail
Update
2.46.15 Increase uplink level Threshold

Full Name
Increase uplink level Threshold
Abbreviation
pcUlInclLevThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter falls into the follwoing seven types: FR, HR, AFS, AHS,
FR-AMR-WB, OFR-AMR-WB, and OHR-AMR-WB.
It can independently control various voice versions. Uplink receiving
strength is one of the factors that may lead to MS power increased in the
uplink direction. If P out of N recent uplink signal strength averages are
lower than the related thresholds, the uplink transmission power of MS
Description
should be increased, because the strength of uplink signals is too weak.
Instance
Cell
0..63
Unit
N/A
Default Value
[22,22,22,22,22,22,22]
Default Value
Under the general scenario, when the uplink level is 88 dbm~-80 dbm,
the signal strength is able to ensure normal CS, and does not bring
about uplink interference.
If this threshold is configured too low, the
uplink receiving strength is weak but the power is not controlled.

In this case, it is easy to cause poor voice quality or call drop.

If the threshold is configured too high, the uplink interference will
increase. In the case of weak indoor coverage, it is recommended that
this threshold be properly increased to avoid poor voice quality caused
by rapid signal attenuation.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1859
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.16 Decrease uplink level Threshold

Full Name
Decrease uplink level Threshold
Abbreviation
pcUlRedLevThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
strength is one of the factors that may lead to MS power decreased in
the uplink direction. The judge process is as follows: If P out of N recent
uplink signal strength averages are higher than the related thresholds,
the uplink transmission power of MS should be decreased, because the
Description
strength of uplink signals is too strong.
Instance
Cell
0..63
Unit
N/A
Default Value
[30,30,30,30,30,30,30]
Default Value
Under the general scenario, when the uplink level is 88dbm~-80dbm,

the signal strength is able to ensure normal CS, and does not bring
about uplink interference
2-1860
SJ-20130408140048-016|2013-07-17(R1.0)

MS power will be decreased when the uplink receiving strength is weak.
If this threshold is configured too high, the uplink receiving strength

is too strong but the power lowering will not be decreased. In this
case, interference exists. In the case of weak indoor coverage, it
is recommended that this threshold be properly increased to avoid
poor voice quality caused by rapid signal attenuation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.17 Increase uplink quality Threshold

Full Name
Increase uplink quality Threshold
Abbreviation
pcUlInclQualThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
quality is one of the factors that may lead to MS power increased in the
uplink direction. The judge process is as follows: If P out of N recent
the uplink transmission power of MS should be increased, because the
Description
strength of uplink signals is too weak.
Instance
Cell
2-1861
SJ-20130408140048-016|2013-07-17(R1.0)
0..7
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Under the general scenario, the signal quality (0 to 2) is able to ensure
CS voice quality.
If this threshold is configured too high, call drop occurs because the
receiving quality is too poor, and downlink RQ ratio is influenced.
If this threshold is configured too low, MS' power increases resulting
from a slight interference, and the interference increases.
The quality threshold can be changed in accordance with the

uplink/downlink radio environment. It can be adjusted as 0, 1when

the radio environment is poor. The transmission power of uplink signals
increases and mutual interference increases with the improvement of
quality threshold. The ratio of networtk performance index RQ=03
and the power increases because of power control. Therefore, when
this parameter is set or optimized, it needs to keep a balance among
the network performance index (RQ=0~3%) improvement, power
incremenet, and interferemce increment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.18 Decrease uplink quality Threshold

Full Name
Decrease uplink quality Threshold
Abbreviation
pcUlRedQualThs
Managed Object
Power Control
2-1862
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
quality is one of the factors that may lead to MS power decreased in the
uplink signal quality averages are lower than the related thresholds, the
uplink transmission power of MS should be decreased, because the
Description
quality of uplink signals is too good.
Instance
Cell
0..7
Unit
N/A
Default Value
[0,0,0,0,0,0,0]
Default Value
CS voice quality.
If this value is adjusted excessively, the
power will not increase if the interference exists and call drops
occur due to poor quality. Therefore, it is recommended that this

value be not modified.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1863
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.19 Increase downlink level Threshold

Full Name
Increase downlink level Threshold
Abbreviation
pcDlInclLevThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
It can independently control various voice versions. Downlink receiving
strength is one of the factors that may lead to BTS power increased in the
downlink direction. If P out of N recent downlink signal strength averages
are lower than the related thresholds, the downlink transmission
power of the BTS should be increased, because the downlink signals
Description
are too weak.
Instance
Cell
0..63
Unit
N/A
Default Value
[32,32,32,32,32,32,32]
Default Value
Under the general scenario, when the level is 84dbm~-76dbm dbm, the
signal strength is able to ensure normal CS.

receiving strength of the MS is weak but the power is not controlled.
If the threshold is configured too high, the downlink interference
will increase. For the sites that have requirements on the downlink
coverage level, increase the threshold of downlink power control
according
to the coverage requirements. For example, for the sites that have
requirements on the downlink -75dBm coverage, it is recommended that
the threshold for downlink power increase or decrease be changed to
36 or 42 respectively.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1864
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.20 Decrease downlink level Threshold

Full Name
Decrease downlink level Threshold
Abbreviation
pcDlRedLevThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter falls into the follwing seven types: FR, HR, AFS, AHS,
strength is one of the factors that may lead to BTS power decreased
in the downlink direction. The judge process is as follows: If P out of N
recent downlink signal strength averages are higher than the related
thresholds, the downlink transmission power of the BTS should be
Description
decreased, because the downlink signals are too strong.
Instance
Cell
0..63
Unit
N/A
Default Value
[42,42,42,42,42,42,42]
Default Value
Under the general scenario, when the level is 84dbm~-76dbm dbm, the
signal strength is able to ensure normal CS.

receiving strength of the MS is weak but the power is not controlled.
If the threshold is configured too high, the downlink interference
will increase. For the sites that have requirements on the downlink
coverage level, increase the threshold of downlink power control
according
to the coverage requirements. For example, for the sites that have
requirements on the downlink -75dBm coverage, it is recommended that
the threshold for downlink power increase or decrease be changed to
36 or 42 respectively.
2-1865
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.21 Increase downlink quality Threshold

Full Name
Increase downlink quality Threshold
Abbreviation
pcDlInclQualThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
quality is one of the factors that may lead to BTS power increased in
the downlink direction. The judge process is as follows: If P out of N
Description
increased, because the downlink signals are too weak.
Instance
Cell
0..7
Unit
N/A
Default Value
[1,1,1,1,1,1,1]
Default Value
CS voice quality.
2-1866
SJ-20130408140048-016|2013-07-17(R1.0)
If this threshold is configured too high, call drop occurs because the
receiving quality is too poor, and downlink RQ ratio is influenced.
If this threshold is configured too low, MS' power increases resulting
from a slight interference, and the interference increases.
The quality threshold can be changed in accordance with the
uplink/downlink radio environment. It can be adjusted as 0, 1when

the radio environment is poor. The transmission power of uplink signals
increases and mutual interference increases with the improvement of
quality threshold. The ratio of networtk performance index RQ=03
and the power increases because of power control. Therefore, when
this parameter is set or optimized, it needs to keep a balance among
the network performance index (RQ=0~3%) improvement, power
incremenet, and interferemce increment.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.22 Decrease downlink quality Threshold

Full Name
Decrease downlink quality Threshold
Abbreviation
pcDlRedQualThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1867
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter falls into the following seven types: FR, HR, AFS, AHS,
quality is one of the factors that may lead to BTS power decreased
in the downlink direction. The judge process is as follows: If P out of
N recent downlink signal quality averages are lower than the related
Description
decreased, because the downlink signals are too good.
Instance
Cell
0..7
Unit
N/A
Default Value
[0,0,0,0,0,0,0]
Default Value
CS voice quality.
If this value is adjusted excessively, the
power will not increase if the interference exists and call drops
occur due to poor quality. Therefore, it is recommended that this

value be not modified.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.23 Increase uplink level Value P

Full Name
Increase uplink level Value P
Abbreviation
pcUlInclLevP
2-1868
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
The accuracy and sensitivity of the power control
should be guaranteed.
If N and P values are high, BTS can average more level samples to raise
the preciseness. However the sensitivity will be lowered.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.24 Increase uplink level Value N

Full Name
Increase uplink level Value N
2-1869
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
pcUlInclLevN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1870
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.25 Increase downlink level Value P

Full Name
Increase downlink level Value P
Abbreviation
pcDlInclLevP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
are lower than the related thresholds, the downlink transmission power
of the BTS should be increased, because the downlink signals are too
Description
weak.
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1871
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.26 Increase downlink level Value N

Full Name
Increase downlink level Value N
Abbreviation
pcDlInclLevN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
are lower than the related thresholds, the downlink transmission power
of the BTS should be increased, because the downlink signals are too
Description
weak.
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1872
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.27 Decrease uplink level Value P

Full Name
Decrease uplink level Value P
Abbreviation
pcUlRedLevP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1873
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.28 Decrease uplink level Value N

Full Name
Decrease uplink level Value N
Abbreviation
pcUlRedLevN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1874
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.29 Decrease downlink level Value P

Full Name
Decrease downlink level Value P
Abbreviation
pcDlRedLevP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
strength is one of the factors that may lead to BTS power decreased in
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1875
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.30 Decrease downlink level Value N

Full Name
Decrease downlink level Value N
Abbreviation
pcDlRedLevN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
strength is one of the factors that may lead to BTS power decreased in
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1876
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.31 Increase uplink quality Value P

Full Name
Increase uplink quality Value P
Abbreviation
pcUlInclQualP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1877
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.32 Increase uplink quality Value N

Full Name
Increase uplink quality Value N
Abbreviation
pcUlInclQualN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1878
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.33 Increase downlink quality Value P

Full Name
Increase downlink quality Value P
Abbreviation
pcDlInclQualP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1879
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.34 Increase downlink quality Value N

Full Name
Increase downlink quality Value N
Abbreviation
pcDlInclQualN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1880
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.35 Decrease uplink quality Value P

Full Name
Decrease uplink quality Value P
Abbreviation
pcUlRedQualP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1881
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.36 Decrease uplink quality Value N

Full Name
Decrease uplink quality Value N
Abbreviation
pcUlRedQualN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1882
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.37 Decrease downlink quality Value P

Full Name
Decrease downlink quality Value P
Abbreviation
pcDlRedQualP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
quality is one of the factors that may lead to BTS power decreased in the
downlink direction. The judge process is as follows: If P out of N recent
downlink signal quality averages are lower than the related thresholds,
the downlink transmission power of the BTS should be decreased,
Description
because the downlink signals are too good.
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1883
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.38 Decrease downlink quality Value N

Full Name
Decrease downlink quality Value N
Abbreviation
pcDlRedQualN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
quality is one of the factors that may lead to BTS power decreased in the
downlink direction. The judge process is as follows: If P out of N recent
downlink signal quality averages are lower than the related thresholds,
the downlink transmission power of the BTS should be decreased,
Description
because the downlink signals are too good.
Instance
Cell
1..31
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1884
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.39 MAX power level of MS

Full Name
MAX power level of MS
Abbreviation
msTxPwrMax
Managed Object
Power Control
3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
3GPP TS 45.008
transmission power that can be output. During BSC power control, this
parameter determines the maximum transmission power available for
MS in the cell. BSC also uses it to calculate PBGT value. The maximum
power level of the MS falls into the following types: FR, HR, AMR FR,
Description
and AMR HR.
Instance
Cell
0..31
Unit
N/A
Default Value
[5,5,5,5,5,5,5]
Default Value
This is to maximize the initial transmission
power of the MS.
success ratio of SD designation.
When the radio environment is good, MS normal access can be ensured
The weak uplink receiving power level will impact the TCH and the
even if the parameter is set lower.

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1885
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.40 MIN power level of MS

Full Name
MIN power level of MS
Abbreviation
msTxPwrMin
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
The MS must extract the power control header from downward SACCH
and takes the specified transmission power as output power. If the
power level of MS cannot output the power value, it will output the
closest transmission power that can be output. When BSC is performing
power control, this parameter is the minimal transmission power (that
is, lower limit of power control) that can be used by MS in the cell. The
minimum power level of the MS falls into the following four types: FR,
Description
HR, AMR FR, and AMR HR.
Instance
Cell
0..31
Unit
N/A
Default Value
[16,16,16,16,16,16,16]
Default Value
The uplink level and the MS power consumption
are ensured simultaneously.

If this parameter is set too low, the uplink receiving power will be weak;

if it is set too high, MS transmission power will be high and the uplink
interference will be brought up.
This parameter should be set higher to ensure the uplink receiving
signal strength.
2-1886
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.41 MIN power level of BS

Full Name
MIN power level of BS
Abbreviation
bsTxPwrMin
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
the power for the BTS through the power command. The BTS must
take the transmittion power stipulated by the power command as the
output power. During BSC power control, this parameter is the minimal
transmission power used by the BTS in a cell.
If the maximum transmission power of the BTS is Pn, then:
l 0Pn
l 1Pn-2 dB
....
Description
l 15Pn-30 dB
Instance
Cell
0..15
Unit
N/A
Default Value
[10,10,10,10,10,10,10]
2-1887
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The BTS power is adjusted within a high power
range.

This parameter indicates the range of power

adjustment for the BTS. A high value does not help reduce the downlink
network interference.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.42 Uplink rapid power control

Full Name
Uplink rapid power control
Abbreviation
ulRapidPcInd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the availability of the rapid power control
process. The rapid power control process is an optional process of BSC.
It reduces the interference of the whole BSS radio system and satisfies
the dynamic power control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
Description
parameter power control step (increase and decrease).
Instance
Cell
0: Off
1: On
2-1888
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
MS power can be adjusted quickly to reduce
interference. Then BTS can get a steady level.

Configuration principle: The configuration
can be adjusted based on the real-time receiving signal level and

the value difference between quality and the expected threshold. This
power control mode can meet the needs of dynamic power control for
rapid moving MS. However, it will cause the transmission power for
BTS or MS to adjust too quickly, which will result in unsteady receiving
signals.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.43 Downlink rapid power control

Full Name
Downlink rapid power control
Abbreviation
dlRapidPcInd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1889
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the availability of the rapid power control

process. The rapid power control process is an optional process of BSC.
It reduces the interference of the whole BSS radio system and satisfies
the dynamic power control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
Description
parameter power control step (increase and decrease).
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
Enabling downlink rapid power control is likely
to cause the deterioration of RQ.

This power control mode can meet the needs
of dynamic power control for rapid moving MS. However, it will cause
the BTS transmission power to adjust too quickly, which will result
in unsteady receiving signals.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.44 MIN interval of power control

Full Name
MIN interval of power control
Abbreviation
pcMinInterval
2-1890
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the minimum interval of power control. Usually,
MS still sends two measurement reports with the original power to BSC
after enabling the power control. Signal level information contained in the
reports is inaccurate and can be ignored (information such as adjacent
cell information is still valid). Thus a minimum interval of power control is
Description
needed and signal level information during the interval can be ignored.
Instance
Cell
1..32
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
SDR base station will abandon the wrong measurement reports and
Default Value
ensure the correctness of power control.
V3 base station will at the same time ensure the correctness of power
control and the speed of initial power control.
For the SDR base station, two inaccurate measurement reports are
discarded between two uplink power controls. It is recommended not
to modify this parameter.

For V base station, it is also recommended not to modify this parameter.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710e
Parameter Modifying
Detail
Update
2-1891
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.45 Power control PwrDecrLimit

Full Name
Power control PwrDecrLimit
Abbreviation
pwrDecrLimit
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter is set for preventing MS from call drop due to fast
power control. It corresponds to different quality levels. For example,
PwrDecrLimit [0] determines the maximum power decrease limit for
calls with receiving quality level 0 (Bit Error rate (BER) <0.2%). This
Description
parameter is valid for both uplink and downlink.
Instance
Cell
0..38
Unit
N/A
Default Value
[24,22,20,18,16,14,12,10]
Default Value
When the rapid power control is conducted,

get the middle value to ensure the speed and to prevent the power
from decreasing too quickly.
If the value adjusted higher, the power changing
amplitude becomes bigger and there will risks of call drops; if the
value is adjusted lower, the power changing sensitivity will be smaller

and the impact of power control will be reduced.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1892
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.46 Report period of measurement for power control

Full Name
Report period of measurement for power control
Abbreviation
pwrCtrlReportPrd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Power control is performed at BTS side and BSC implements relevant
performance statistics. BTS uses this parameter to decide the periodicity
to send the preprocessed power measurement to BSC as an input for
power control analysis. This parameter is in the unit of SACCH multi-
Description
frame.
Instance
Cell
1..254
Unit
51 mf
Default Value
240
Default Value
BTS will report the control performance measurement
result each 240 51-double frames or 26 double frames.

The default value should be applied. This parameter

controls the frequency of power performance measurement report from
BTS to iBSC.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1893
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.47 BCCH power control downlink

Full Name
BCCH power control downlink
Abbreviation
BCCHPwrControlDL
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to implement power control for the dedicated channel on the BCCH carrier according to various network require-
Description
ments.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
Downlink power control is not implemented for

the BCCH carrier, so as to ensure that the MS can correctly measure
the downlink level of this cell.
Whether to enable this parameter is determined by users. Enabling this
parameter reduces the power consumption of BTS, the downlink level
measured in this cell decreases. Consequently, the reselection, and the

handover judgement at the network side are influenced.
Change Mode
Offline
Related features
ZGO-04-04-008 Intelligent BCCH Power Reduction
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1894
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.48 BCCH maxim power decrease

Full Name
BCCH maxim power decrease
Abbreviation
BCCHMaxPwrDec
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
When the BCCH carrier participates in the downlink power control, this
parameter determines the maximum deteriorated value of the dedicated
Description
channel on the BCCH carrier.
Instance
Cell
0..60
Unit
0.5db
Default Value
Default Value
of downlink BCCH power control. As a caution, this parameter is
configured
The value of this parameter defines the range
to 3 dB.
The value is valid only when the downlink power control on BCCH
carrier is enabled. If the value is configured too large, the downlink level
measured in this cell and adjacent cells is too low.
Change Mode
Offline
Related features
Related Parameters
BCCHPwrControlDL
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1895
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.49 BCCH idle burst power

Full Name
BCCH idle burst power
Abbreviation
BCCHIdleBurstPwr
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to decrease the output power of idle
Description
timeslots on the BCCH carrier according to various network requirements.
Instance
Cell
0:Not to cut power output
1:0.5Db
2:1Db
3:1.5Db
4:2Db
5:2.5Db
6:3Db
7:3.5Db
8:4Db
9:4.5Db
10:5Db
11:5.5Db
12:6Db
13:6.5Db
14:7Db
15:7.5Db
16:8Db
17:8.5Db
18:9Db
19:9.5Db
20:10Db
21:10.5Db
22:11Db
23:11.5Db
24:12Db
25:12.5Db
26:13Db
27:13.5Db
28:14Db
29:14.5Db
30:15Db
31:15.5Db
32:16Db
2-1896
SJ-20130408140048-016|2013-07-17(R1.0)
33:16.5Db
34:17Db
35:17.5Db
36:18Db
37:18.5Db
38:19Db
39:19.5Db
40:20Db
41:20.5Db
42:21Db
43:21.5Db
44:22Db
45:22.5Db
46:23Db
47:23.5
48:24Db
49:24.5Db
50:25Db
51:25.5Db
52:26Db
53:26.5Db
54:27Db
55:27.5Db
56:28Db
57:28.5Db
58:29Db
59:29.5Db
60:30Db
61:(Turn off power)
Unit
N/A
Default Value
Default Value
Do not decrease the output power of idle timeslots

on the BCCH carrier, so as to ensure correct measurement on the level
of this cell.
Whether to reduce the output power in idle slots of BCCH carrier is

determined by users, to reduce the power consumption of BTS.

If the value is configured too large, the downlink level measured in
this cell is too low. Consequently, the reselection, and the handover
judgement at the network side are influenced.
Change Mode
Offline
Related features
Related Parameters
N/A
2-1897
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.50 Uplink exponential filter

Full Name
Uplink exponential filter
Abbreviation
ULExpFilter
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to process the uplink level and quality through exponential filtering during uplink power control and use the
Description
processed data for uplink power control judgment.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
Exponential filtering has good effect on eliminating

burr. The disadvantage is that is cannot adapt to sharp fluctuation
of radio environments. By default, this function is disabled.
After the exponential filtering function is

enabled, the impact of the latest measurement samples will be

weakened,
which helps prevent power control jitter. However, the sensitivity
of power control is also decreased.
Change Mode
Offline
Related features
ZGO-04-02-018 Enhanced Dynamic Power Control

2-1898
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.51 Downlink exponential filter

Full Name
Downlink exponential filter
Abbreviation
DLExpFilter
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to process the downlink level and
quality through exponential filtering during downlink power control and
Description
use the processed data for downlink power control judgment.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
Default Value
Exponential filtering has good effect on eliminating

burr. The disadvantage is that is cannot adapt to sharp fluctuation
of radio environments. By default, this function is disabled.
After the exponential filtering function is

enabled, the impact of the latest measurement samples will be

weakened,
which helps prevent power control jitter. However, the sensitivity
of power control is also decreased.
Change Mode
Offline
2-1899
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.52 Uplink level optimize

Full Name
Uplink level optimize
Abbreviation
ULLevOptim
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to use the optimized uplink level as the
expected level for uplink power control. The optimized uplink level is a
value between the threshold of uplink power increase and the threshold
Description
of uplink power decrease.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
0
After the optimized uplink level is used as
Default Value
the expected uplink strength value, the system can prevent extra power
control caused by a close value between the target level and the
threshold
of power increase or the threshold of power decrease.
If this function is enabled, the system can
prevent ping-pong power control caused by level.

2-1900
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.53 Downlink level optimize

Full Name
Downlink level optimize
Abbreviation
DLLevOptim
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicares whether to use the optimized downlink level as
the expected level for downlink power control. The optimized downlink
level is a value between the threshold of downlink power increase and
Description
the threshold of downlink power decrease.
Instance
Cell
0: Off
1: On
Unit
N/A
Default Value
0
After the optimized downlink level is used
Default Value
as the expected uplink strength value, the system can prevent extra
power control caused by a close value between the target level and
the threshold of power increase or the threshold of power decrease.
2-1901
SJ-20130408140048-016|2013-07-17(R1.0)
If this function is enabled, the system can
prevent ping-pong power control caused by level.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.54 Minimize Interval of downlink power control

Full Name
Minimize Interval of downlink power control
Abbreviation
DLPcMinInterval
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the minimum interval of power control. Usually,
MS still sends two measurement reports with the original power to BSC
after enabling the power control. Signal level information contained in the
reports is inaccurate and can be ignored (information such as adjacent
cell information is still valid). Thus a minimum interval of power control is
Description
needed and signal level information during the interval can be ignored.
Instance
Cell
1..32
Unit
N/A
Default Value
[2,2,2,2,2,2,2]
Default Value
Incorrect measurement reports will be abandoned
to ensure correct power control.
2-1902
SJ-20130408140048-016|2013-07-17(R1.0)
Two incorrect measurement reports are abandoned
during two times of uplink power control.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.55 Increase step of downlink power control

Full Name
Increase step of downlink power control
Abbreviation
DLPwrIncStep
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the power increasing step in the downlink direction. It is the value of downlink power control increase. In addition, it falls
Description
into the following four types: FR, HR, AMR FR, and AMR HR.
Instance
Cell
1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
12: 6dB
Unit
N/A
Default Value
[8,8,8,8,8,8,8]
2-1903
SJ-20130408140048-016|2013-07-17(R1.0)
To implement smaller sharing granularity after

Default Value
the power sharing function is enabled, it is recommended that this

parameter be configured to 1 (0.5 dB). If the power sharing function
is not enabled, it is recommended that this parameter be configured
to 4 (2 dB).
If this parameter is configured too small,
the downlink power increases slowly. As a result, the voice quality
is deteriorated or even call drops occur. Therefore, it is recommended

that the value be not configured too small.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.56 Decrease step of downlink power control

Full Name
Decrease step of downlink power control
Abbreviation
DLPwrRedStep
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter indicates the power decreasing step in the downlink direction. It is the value of downlink power control decrease. In addition, it
Description
falls into the following four types: FR, HR, AMR FR, and AMR HR.
Instance
Cell
2-1904
SJ-20130408140048-016|2013-07-17(R1.0)
1: 0.5dB
2: 1dB
4: 2dB
8: 4dB
12: 6dB
Unit
N/A
Default Value
[4,4,4,4,4,4,4]
To implement smaller sharing granularity after
Default Value
the power sharing function is enabled, it is recommended that this

parameter be configured to 1 (0.5 dB). If the power sharing function
is not enabled, it is recommended that this parameter be configured
to 4 (2 dB).


the downlink power may be decreased sharply in some special cases.
As a result, the KPIs such as call drop will be affected.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.57 Urgent Rescue Switch

Full Name
Urgent Rescue Switch
Abbreviation
UrgentRescueInd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1905
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to enable the uplink/downlink level

and quality urgent rescue function. The urgent rescue function is optional.
When this function is enabled, power can be rapidly improved when the
level or quality is too low, and thus the proportion of low level and low
Description
quality signals is decreased in the entire network.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
To rapidly improve power to guarantee conversation quality when the
level or quality is too low
The urgent rescue function is used to rapidly increase power when the
level or quality is too low. It is recommended to enable this function.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.58 Uplink Initial State Effectively Switch

Full Name
Uplink Initial State Effectively Switch
Abbreviation
ULINITStateInd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1906
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to enable the initial state function for
uplink power control. The uplink initial state function can rapidly decrease
Description
the MS transmitting power and save resources. It is optional.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
To rapidly reduce the transmitting power during the initial phase of a
conversion, thus reducing the MS power consumption.

The uplink power control initial status function is used to rapidly decrease
the MS's transmitting power and reduce resources. It is recommended
to enable this function.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.59 Initial State MR Number

Full Name
Initial State MR Number
Abbreviation
PcINITMRNum
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1907
SJ-20130408140048-016|2013-07-17(R1.0)
When the Uplink Initial State Effectively Switch is enabled, the channel
power control status is set to the initial state. Normal power control is
started after one power decrease or the number of measurement reports
Description
indicating no power decrease reaches this parameter value.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
Recommended value from experiments
A greater value indicates a longer retention in the initial status if the
uplink power is no reduced.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.60 High Level High Quality Effectively Switch

Full Name
High Level High Quality Effectively Switch
Abbreviation
GoodLevBadQuaInd
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1908
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to enable the High Level High Quality
Effectively switch. If the switch is enabled, the power is unchanged in the
power control decision in case of high level and high quality. If the switch
Description
is disabled, the power is increased in the power control decision.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The power level should remain unchanged for high-level high-quality
due to co-frequency interference.

High level and high quality (bad quality) may be caused by co-frequency
or adjacent frequency interference. Increasing the power may lead to
deterioration. It is recommended to enable this function to keep the

power level unchanged.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.61 Uplink Exponential Filter Cycle

Full Name
Uplink Exponential Filter Cycle
Abbreviation
PcULExpFiltCycleK
Managed Object
Power Control
3GPP Name
N/A
2-1909
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter is used to calculate the weight (a) of the previous exponential filtering measurement report in the uplink exponential filter algorithm. The weight of the current measurement report is 1-a. If K=0, then
Description
a=0; if K>0, then a=1/(2^(PcULExpFiltCycleK/2)).
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
A greater value indicates a smaller a value and a higher weight of the
current measurement report.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.62 Downlink Exponential Filter Cycle

Full Name
Downlink Exponential Filter Cycle
Abbreviation
PcDLExpFiltCycleK
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1910
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter is used to calculate the weight (a) of the previous exponential filtering measurement report in the downlink exponential filter
algorithm. The weight of the current measurement report is 1-a. If K=0,
Description
then a=0; if K>0, then a=1/(2^(PcULExpFiltCycleK/2)).
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
A greater value indicates a smaller a value and a higher weight of the
current measurement report.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.63 Uplink Window Filter Weight Sequence

Full Name
Uplink Window Filter Weight Sequence
Abbreviation
PcULWinFiltWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1911
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the weight of the measurement report in the corresponding position when weighedt filter is done in the uplink measurement
report window. PcULWinFiltWeight[0] represents the weight of the fist
measurement report in the window, PcULWinFiltWeight[1] represents the
Description
weight of the second measurement report in the window, and so on.
Instance
Cell
0..32
Unit
N/A
Default Value
[1,3,5,7,9,11,13,15]
Default Value
A greater value indicates a higher weight of the window filter of the
corresponding measurement report in uplink power control.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.64 Downlink Window Filter Weight Sequence

Full Name
Downlink Window Filter Weight Sequence
Abbreviation
PcDLWinFiltWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1912
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter sets the weight of the measurement report in the corresponding position when weighedt filter is done in the downlink measurement report window. PcDLWinFiltWeight[0] represents the weight of the
fist measurement report in the window, PcDLWinFiltWeight[1] represents
Description
the weight of the second measurement report in the window, and so on.
Instance
Cell
0..32
Unit
N/A
Default Value
[1,3,5,7,9,11,13,15]
Default Value
A greater value indicates a higher weight of the window filter of the
corresponding measurement report in downlink power control.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.65 Uplink Level Urgent Rescue Threshold

Full Name
Uplink Level Urgent Rescue Threshold
Abbreviation
PcULRescueLevThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1913
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter applies individually for FR, HR, AFS, AHS, WFS, OWFR,
and OWHR voice versions. When the uplink receiving level in the current
measurement report is lower than the threshold, uplink level urgent rescue
Description
is implemented.
Instance
Cell
0..63
Unit
N/A
Default Value
[20,20,20,20,20,20,20]
Default Value
In normal scenarios, if the uplink signal strength is lower than -90 dbm,
the CS conversation quality may be affected.

A greater value indicates that urgent rescue for uplink level is more
probable to be triggered and the proportion of low levels is decreased in
the entire network.
Change Mode
Offline
Related features
Related Parameters
R_POC.PcUlInclLevThs
R_HOC.HoUlLevThs
Relationship
R_HOC.HoUlLevThs <= PcULRescueLevThs <= R_POC.PcUlInclLevThs;
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.66 Downlink Level Urgent Rescue Threshold

Full Name
Downlink Level Urgent Rescue Threshold
Abbreviation
PcDLRescueLevThs
Managed Object
Power Control
3GPP Name
N/A
2-1914
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
and OWHR voice versions. When the downlink receiving level in the current measurement report is lower than the threshold, downlink level urgent
Description
rescue is implemented.
Instance
Cell
0..63
Unit
N/A
Default Value
[25,25,25,25,25,25,25]
Default Value
In normal scenarios, if the downlink signal strength is lower than -85
dbm, the CS conversation quality may be affected.

A greater value indicates that urgent rescue for downlink level is more
the entire network.
Change Mode
Offline
Related features
Related Parameters
R_POC.PcDlInclLevThs
R_HOC.HoDlLevThs
Relationship
R_HOC.HoDlLevThs <= PcDLRescueLevThs <= R_POC.PcDlInclLevThs;
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.67 Uplink Quality Urgent Rescue Threshold

Full Name
Uplink Quality Urgent Rescue Threshold
Abbreviation
PcULRescueQualThs
Managed Object
Power Control
2-1915
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
and OWHR voice versions. When the uplink receiving quality in the current measurement report is lower than the threshold, uplink quality urgent
Description
rescue is implemented.
Instance
Cell
0..7
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
In normal scenarios, if the signal quality is higher than 3, the CS
conversation quality may be affected.

A greater value indicates that urgent rescue for uplink quality is more
the entire network.
Change Mode
Offline
Related features
Related Parameters
R_POC.PcUlInclQualThs
R_HOC.HoUlQualThs
Relationship
1. R_POC.PcUlInclQualThs <= PcULRescueQualThs

2. PcULRescueQualThs * 10 <= R_HOC.HoUlQualThs
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710e
Parameter Modifying
Detail
Update
2.46.68 Downlink Quality Urgent Rescue Threshold

Full Name
Downlink Quality Urgent Rescue Threshold
Abbreviation
PcDLRescueQualThs
2-1916
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
and OWHR voice versions. When the downlink receiving quality in the
current measurement report is lower than the threshold, downlink quality
Description
urgent rescue is implemented.
Instance
Cell
0..7
Unit
N/A
Default Value
[3,3,3,3,3,3,3]
Default Value
In normal scenarios, if the signal quality is higher than 3, the CS
conversation quality may be affected.

A greater value indicates that urgent rescue for downlink quality is more
the entire network.
Change Mode
Offline
Related features
Related Parameters
R_POC.PcDlInclQualThs
R_HOC.HoDlQualThs
Relationship
1. R_POC.PcDlInclQualThs <= PcDLRescueQualThs

2. PcDLRescueQualThs * 10 <= R_HOC.HoDlQualThs
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710e
Parameter Modifying
Detail
Update
2.46.69 N of Urgent Rescue

Full Name
N of Urgent Rescue
2-1917
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
PcUrgentRescueN
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter is applicable for all voice versions. If among the average
numbers of recent N uplink or downlink receiving level or quality values,
there are P average numbers lower than the corresponding urgent rescue
threshold, the corresponding urgent rescue process is started and the
Description
BTS (MS) power is improved.
Instance
Cell
1..3
Unit
N/A
Default Value
Default Value
To guarantee the accuracy and sensitivity of the power control

Greater N and P values indicate that more level samples can be
averaged and higher accuracy can be obtained with burr interference
filtered out. However, the sensitivity is decreased.
Change Mode
Offline
Related features
Related Parameters
PcUrgentRescueP
Relationship
PcUrgentRescueP <= PcUrgentRescueN
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.70 P of Urgent Rescue

Full Name
P of Urgent Rescue
2-1918
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
PcUrgentRescueP
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter is applicable for all voice versions. If among the average
numbers of recent N uplink or downlink receiving level or quality values,
there are P average numbers lower than the corresponding urgent rescue
threshold, the corresponding urgent rescue process is started and the
Description
BTS (MS) power is improved.
Instance
Cell
1..2
Unit
N/A
Default Value
Default Value
To guarantee the accuracy and sensitivity of the power control

Greater N and P values indicate that more level samples can be
averaged and higher accuracy can be obtained with burr interference
filtered out. However, the sensitivity is decreased.
Change Mode
Offline
Related features
Related Parameters
PcUrgentRescueN
Relationship
PcUrgentRescueP <= PcUrgentRescueN
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.71 Uplink Power Reduce Level Margin

Full Name
Uplink Power Reduce Level Margin
2-1919
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
PcULRedLevMargin
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
and OWHR voice versions. This threshold accomplishes a dynamic
downlink power control decision. It enables the system to adjust power
control direction in different sections. For medium level and low quality, if
the average of the filtered level is lower than " uplink signal for increasing
power+uplink power level margin", the system does not decrease the
power.
The footnotes 0-3 correspond to 0-FR,1-FP, 2-AMR FR, and 3-AMR
Description
HR respectively.
Instance
Cell
0..38
Unit
N/A
Default Value
[6,6,6,6,6,6,6]
Default Value
Required by the SDR power control algorithm

A greater value indicates a higher level to cause reduction of uplink
power for medium level and low quality signals. It is recommended to
set this parameter to (uplink signal for decreasing powe - uplink signal
for increasing power)/2
Change Mode
Offline
Related features
Related Parameters
PcUlRedLevThs
PcUlInclLevThs
Relationship
PcULRedLevMargin <= PcUlRedLevThs - PcUlInclLevThs
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1920
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.46.72 Downlink Power Reduce Level Margin

Full Name
Downlink Power Reduce Level Margin
Abbreviation
PcDLRedLevMargin
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
and OWHR voice versions. This threshold accomplishes a dynamic
downlink power control decision. It enables the system to adjust power
control direction in different sections. For medium level and low quality,
if the average of the filtered level is lower than " downlink signal for
increasing power+downlink power level margin", the system does not
decrease the power.
Description
HR respectively.
Instance
Cell
0..38
Unit
N/A
Default Value
[6,6,6,6,6,6,6]
Default Value
Required by the SDR power control algorithm

A greater value indicates a higher level to cause reduction of downlink
power for medium level and low quality signals. It is recommended to
set this parameter to (uplink signal for decreasing powe - uplink signal
for increasing power)/2
Change Mode
Offline
Related features
Related Parameters
PcDlRedLevThs
PcDlInclLevThs
Relationship
PcDLRedLevMargin <= PcDlRedLevThs - PcDlInclLevThs
Related Interfaces
Um
Impact on Equipment
Impact on service
2-1921
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.73 Initial State Power Decrease Limit

Full Name
Initial State Power Decrease Limit
Abbreviation
PcINITDecrLimit
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
and OWHR voice versions.
This parameter sets the uplink power decrease threshold when the
Uplink Initial State Effectively Switch is enabled.
Description
HR respectively.
Instance
Cell
0:2dB
1:4dB
2:6dB
3:8dB
4:10dB
5:12dB
6:14dB
7:16dB
Unit
N/A
Default Value
[5,5,5,5,5,5,5]
Default Value
To prevent excessively large initial state power decrease steps.
A greater value indicates a larger uplink power change amplitude in
initial status and greater probability of call drops, but higher sensitivity.
Change Mode
Offline
Related features

2-1922
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.74 Uplink Power Decrease Limit of Quality rank

Full Name
Uplink Power Decrease Limit of Quality rank
Abbreviation
ULPwrDecrLimit
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter sets the uplink power decrease threshold corresponding
to different quality levels. ULPwrDecrLimit[0] represents the maximum
power decrease value for quality level 0, ULPwrDecrLimit[1] represents
Description
the maximum power decrease value for quality level 1, and so on.
Instance
Cell
0..38
Unit
N/A
Default Value
[24,22,20,18,16,14,12,10]
Default Value
To guarantee the power control speed and prevent rapid power decrease
in rapid uplink power control, use the middle value.
A greater value indicates a larger uplink power change amplitude and
greater probability of call drops, but higher sensitivity.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-1923
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.75 Downlink Power Decrease Limit of Quality rank

Full Name
Downlink Power Decrease Limit of Quality rank
Abbreviation
DLPwrDecrLimit
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter sets the downlink power decrease threshold corresponding to different quality levels. DLPwrDecrLimit[0] represents the maximum
power decrease value for quality level 0, DLPwrDecrLimit[1] represents
Description
the maximum power decrease value for quality level 1, and so on.
Instance
Cell
0..38
Unit
N/A
Default Value
[24,22,20,18,16,14,12,10]
Default Value
To guarantee the power control speed and prevent rapid power decrease
in rapid uplink power control, use the middle value.
A greater value indicates a larger downlink power change amplitude in
initial status and greater probability of call drops, but higher sensitivity.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
0
2-1924
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.76 Uplink Power decrease Maximum Step of Quality 0

Full Name
Uplink Power decrease Maximum Step of Quality 0
Abbreviation
PwrULDecrbyLevStep0
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
This parameter sets the maximum uplink power decrease step for quality
Description
level 0 in non-rapid power control.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is 0, set an appropriate large value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1925
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.77 Downlink Power decrease Maximum Step of Quality 0

Full Name
Downlink Power decrease Maximum Step of Quality 0
Abbreviation
PwrDLDecrbyLevStep0
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
ity level 0 in non-rapid power control.
Instance
Cell
This parameter sets the maximum downlink power decrease step for qual-
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is 0, set an appropriate large value.
A greater value indicates a larger downlink power change amplitude and
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1926
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.78 Uplink Power decrease Maximum Step of Quality 1 and 2

Full Name
Uplink Power decrease Maximum Step of Quality 1 and 2
Abbreviation
PwrULDecrbyLevStep1
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
level 1 or 2 in non-rapid power control.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is 1 or 2, set a not large value to avoid affecting
CS services.
Change Mode
Offline
Related features
Related Parameters
PwrULDecrbyLevStep0
Relationship
PwrULDecrbyLevStep1 <= PwrULDecrbyLevStep0
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-1927
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.46.79 Downlink Power decrease Maximum Step of Quality 1 and 2

Full Name
Downlink Power decrease Maximum Step of Quality 1 and 2
Abbreviation
PwrDLDecrbyLevStep1
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
ity level 1 or 2 in non-rapid power control.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is 1 or 2, set a not large value to avoid affecting
CS services.
Change Mode
Offline
Related features
Related Parameters
PwrDLDecrbyLevStep0
Relationship
PwrDLDecrbyLevStep1 <= PwrDLDecrbyLevStep0
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1928
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.80 Uplink Power decrease Maximum Step of other Quality

Full Name
Uplink Power decrease Maximum Step of other Quality
Abbreviation
PwrULDecrbyLevStep2
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
level 3 or higher in non-rapid power control.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is bad, it is recommended to set a low value to
avoid affecting CS services.
Change Mode
Offline
Related features
Related Parameters
PwrULDecrbyLevStep1
Relationship
PwrULDecrbyLevStep2 <= PwrULDecrbyLevStep1
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1929
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.81 Downlink Power decrease Maximum Step of other Quality

Full Name
Downlink Power decrease Maximum Step of other Quality
Abbreviation
PwrDLDecrbyLevStep2
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
ity level 3 or higher in non-rapid power control.
Instance
Cell
0: 2dB
1: 4dB
2: 6dB
Unit
N/A
Default Value
Default Value
When the signal quality is bad, it is recommended to set a low value to
avoid affecting CS services.
Change Mode
Offline
Related features
Related Parameters
PwrDLDecrbyLevStep1
Relationship
PwrDLDecrbyLevStep2 <= PwrDLDecrbyLevStep1
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1930
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.82 Downlink New Exponential Filter RQ Target

Full Name
Downlink New Exponential Filter RQ Target
Abbreviation
DLPCRQTarget
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering target quality
Instance
BSC
0..7
Unit
N/A
Default Value
Default Value
The target quality during power control is 3.

The recommended value is 3.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.83 Downlink New Exponential Filter RQ Length

Full Name
Downlink New Exponential Filter RQ Length
Abbreviation
DLFilterRQLenth
Managed Object
Power Control
2-1931
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering quality length
Instance
BSC
1..20
Unit
N/A
Default Value
Default Value
Exponential filtering algorithmquality length

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.84 Downlink power control rescue

Full Name
Downlink power control rescue
Abbreviation
DLPCRescue
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink rescuable power control function switch
Instance
BSC
2-1932
SJ-20130408140048-016|2013-07-17(R1.0)
0:Off 1:On
Unit
N/A
Default Value
Default Value
The downlink rescuable power control switch is off.

Downlink rescuable power control switch
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.85 Downlink New Exponential Filter Interval

Full Name
Downlink New Exponential Filter Interval
Abbreviation
DLPCNewFilterInterv
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink new exponential filtering interval
Instance
BSC
0..12
Unit
N/A
Default Value
2-1933
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
There is an interval of one measurement report between two power
control actions.
The interval should be larger than or equal to 2. The recommended value
is 2.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.86 Downlink New Exponential Filter Function

Full Name
Downlink New Exponential Filter Function
Abbreviation
DLPCNewFilter
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink new exponential filtering function switch
Instance
BSC
0:Off 1:On
Unit
N/A
Default Value
Default Value
By default, the downlink exponential filtering switch is off.

0:Off; 1:On
2-1934
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.87 Downlink New Exponential Filter Level Weight

Full Name
Downlink New Exponential Filter Level Weight
Abbreviation
DLPCLevWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering level weight
Instance
BSC
0..100
Unit
Default Value
Default Value
The exponential filtering function adjusts the transmit power according to
the level and quality. The level weight is 5%.

The level weight should be smaller than the quality weight.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1935
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.88 Downlink New Exponential Filter Level Target

Full Name
Downlink New Exponential Filter Level Target
Abbreviation
DLPCLevTarget
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering target level
Instance
BSC
0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
dBm 60:-51 ~ -50 dBm 61:-50 ~ -49 dBm 62:-49 ~ -48dBm 63:> -48 dBm
Unit
N/A
Default Value
20
2-1936
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The target level during power control is 20, that is, -90 dBm.
This parameter should be adjusted according to the actual level on site.
It is recommended to set this parameter to a smaller value such as 20
and 15.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.89 Downlink New Exponential Filter Level Length

Full Name
Downlink New Exponential Filter Level Length
Abbreviation
DLFilterLevLenth
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Exponential filtering algorithm level length
Instance
BSC
3..15
Unit
N/A
Default Value
Default Value
Exponential filtering algorithmlevel length


2-1937
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.90 Downlink New Exponential Filter Increase\Decrease Ratio

Full Name
Downlink New Exponential Filter Increase\Decrease Ratio
Abbreviation
DLPCINCDecRation
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering increase and decrease proportion
Instance
BSC
1..7
Unit
N/A
Default Value
Default Value
The value helps implement fast power increase and slow power decrease
during power control.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1938
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.91 Downlink good level bad quality

Full Name
Downlink good level bad quality
Abbreviation
DLGoodLevBadQua
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Downlink power control disabled due to good level and bad quality function
Description
switch
Instance
BSC
0:Off 1:On
Unit
N/A
Default Value
Default Value
The switch of downlink power control disabled due to good level and bad
quality is off.
Downlink power control disabled due to good level and bad qualityfunction
switch
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-1939
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.92 Uplink New Exponential Filter RQ Weight

Full Name
Uplink New Exponential Filter RQ Weight
Abbreviation
ULPCRQWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering quality weight
Instance
BSC
0..100
Unit
Default Value
75
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1940
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.93 Uplink New Exponential Filter RQ Target

Full Name
Uplink New Exponential Filter RQ Target
Abbreviation
ULPCRQTarget
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering target quality
Instance
BSC
0..7
Unit
N/A
Default Value
Default Value
The target quality during power control is 3.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1941
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.94 Uplink New Exponential Filter RQ Length

Full Name
Uplink New Exponential Filter RQ Length
Abbreviation
ULFilterRQLenth
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering quality length
Instance
BSC
1..20
Unit
N/A
Default Value
Default Value
Exponential filtering algorithmquality length

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.95 Uplink power control new filter interval

Full Name
Uplink power control new filter interval
Abbreviation
ULPCNewFilterInterv
Managed Object
Power Control
2-1942
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink new exponential filtering interval
Instance
BSC
0..12
Unit
N/A
Default Value
Default Value
There is an interval of two measurement reports between two power
control actions.
The recommended interval is 3 because the MS power control can be
validated after at least three measurement reports are generated.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.96 Uplink power control new filter

Full Name
Uplink power control new filter
Abbreviation
ULPCNewFilter
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink new exponential filtering function switch
Instance
BSC
2-1943
SJ-20130408140048-016|2013-07-17(R1.0)
0:Off 1:On
Unit
N/A
Default Value
Default Value
By default, the uplink exponential filtering switch is off.

0: Off; 1: On
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.97 Uplink New Exponential Filter Level Weight

Full Name
Uplink New Exponential Filter Level Weight
Abbreviation
ULPCLevWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering level weight
Instance
BSC
0..100
Unit
Default Value
2-1944
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.98 Uplink New Exponential Filter Level Target

Full Name
Uplink New Exponential Filter Level Target
Abbreviation
ULPCLevTarget
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering target level
Instance
BSC
2-1945
SJ-20130408140048-016|2013-07-17(R1.0)
0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Unit
N/A
Default Value
20
Default Value
The target level during power control is 20, that is, -90 dBm.
This parameter should be adjusted according to the actual level on site.
It is recommended to set this parameter to a smaller value such as 20
and 15.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1946
SJ-20130408140048-016|2013-07-17(R1.0)
2.46.99 Uplink New Exponential Filter Level Length

Full Name
Uplink New Exponential Filter Level Length
Abbreviation
ULFilterLevLenth
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering level length
Instance
BSC
3..15
Unit
N/A
Default Value
Default Value
Exponential filtering algorithmlevel length

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.100 Uplink New Exponential Filter Increase\Decrease Ratio

Full Name
Uplink New Exponential Filter Increase\Decrease Ratio
Abbreviation
ULPCINCDecRation
Managed Object
Power Control
2-1947
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink exponential filtering increase and decrease proportion
Instance
BSC
1..7
Unit
N/A
Default Value
Default Value
The value helps implement fast power increase and slow power decrease
during power control.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.101 Uplink good level bad quality

Full Name
Uplink good level bad quality
Abbreviation
ULGoodLevBadQua
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Uplink power control disabled due to good level and bad quality function
Description
switch
2-1948
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
BSC
0:Off 1:On
Unit
N/A
Default Value
Default Value
The switch of uplink power control disabled due to good level and bad
quality is off.
Uplink power control disabled due to good level and bad qualityfunction
switch
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.102 The different increase downlink level threshold of SAIC

MS and NON-SAIC MS
The different increase downlink level threshold of SAIC MS and NON-SAIC
Full Name
MS
Abbreviation
pcSaicDlIncLevDif
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1949
SJ-20130408140048-016|2013-07-17(R1.0)
SAIC MSs feature high receptivity. Their receive sensitivity is higher than
that of ordinary MSs. Therefore, the receive level required is lower than
that of ordinary MSs. This parameter indicates that the difference between
downlink level thresholds of SAIC MSs is lower than that of ordinary MSs
Description
when the power increases.
Instance
BSC
0..4
Unit
dB
Default Value
Default Value
By default, the receive levels of SAIC MSs and ordinary MSs are
considered the same. No special action is required.
This parameter should be adjusted according to the actual conditions
of SAIC MSs on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.103 The different decrease downlink level threshold of SAIC

MS and NON-SAIC MS
The different decrease downlink level threshold of SAIC MS and NON-SAIC
Full Name
MS
Abbreviation
pcSaicDlRedLevDif
Managed Object
Power Control
3GPP Name
N/A
2-1950
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
SAIC MSs feature high receptivity. Their receive sensitivity is higher than
that of ordinary MSs. Therefore, the receive level required is lower than
that of ordinary MSs. This parameter indicates that the difference between
downlink level thresholds of SAIC MSs is lower than that of ordinary MSs
Description
when the power decreases.
Instance
BSC
0..4
Unit
dB
Default Value
Default Value
By default, the receive levels of SAIC MSs and ordinary MSs are
considered the same. No special action is required.
This parameter should be adjusted according to the actual conditions
of SAIC MSs on site.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.104 Power control new filter para2

Full Name
Power control new filter para2
Abbreviation
PCNewFilter_2
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
2-1951
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Exponential filtering parameter 2 reserved for new functions
Instance
BSC
0..100
Unit
N/A
Default Value
Default Value
It has no meaning temporarily.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.105 Power control new filter para1

Full Name
Power control new filter para1
Abbreviation
PCNewFilter_1
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Exponential filtering parameter 1 reserved for new functions
Instance
BSC
0..100
Unit
N/A
2-1952
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.106 Downlink rescue quality threshold

Full Name
Downlink rescue quality threshold
Abbreviation
DLRescueQualThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink rescuable power control quality threshold
Instance
BSC
0..7
Unit
N/A
Default Value
Default Value
The downlink rescuable power control can be enabled when the current
quality is lower than the threshold.
2-1953
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.107 Downlink rescue level threshold

Full Name
Downlink rescue level threshold
Abbreviation
DLRescueLevelThs
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink rescuable power control level threshold
Instance
BSC
0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
2-1954
SJ-20130408140048-016|2013-07-17(R1.0)
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Unit
N/A
Default Value
15
Default Value
The downlink rescuable power control can be enabled when the current
level is lower than the threshold.

The recommended value is 15, that is, -95 dBm.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.46.108 Downlink New Exponential Filter RQ Weight

Full Name
Downlink New Exponential Filter RQ Weight
Abbreviation
DLPCRQWeight
Managed Object
Power Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink exponential filtering quality weight
Instance
BSC
0..100
Unit
%
2-1955
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
55
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.47 Power Share (GPwShare)

2.47.1 Power Share ID
Full Name
Power Share ID
Abbreviation
GPwShare
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
Description
Power Share ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
2-1956
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Power Share
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.47.2 Cell enable power dynamic sharing or not

Full Name
Cell enable power dynamic sharing or not
Abbreviation
pwrDynShare
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the cell enables power dynamic sharing
Description
or not.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
2-1957
SJ-20130408140048-016|2013-07-17(R1.0)
To enable the function of dynamic power sharing

in this cell, enable this switch. This helps increase the usage of
cell power resources by sharing unused power of the carriers that
have small transmit power with the carriers that require large transmit
power. In this way, the maximum transmit power of each carrier is
increased.
Change Mode
Offline
Related features
Related Parameters
PwrControlDl
This parameter cannot be set to Yes if the downlink power control switch
Relationship
is not enabled in the first subcell of this cell, or the first subcell of this
cell is not an SDR base station.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.47.3 Power adjustment methods priority

Full Name
Power adjustment methods priority
Abbreviation
pwrAdjPriority
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the dynamic power sharing function used. It is
the congextion control method for power congestion. The method that
Description
ranks higher takes priority.
Instance
Cell
0: Invalid algorithm, no congestion control
1: Outgoing handover of CS services
2: Reduce PDTCH power
2-1958
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
[1,2,0,0,0]
Default Value
Generally, the power congestion control algorithm should be enabled so
that power congestion can be relieved immediately.

Performing CS service handover outgoing affects the call quality, and
reducing PDTCH power affects PS performance. The subscribers can
adjust the parameter. Generally, the CS service handover outgoing

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.47.4 Power reserved for present users

Full Name
Power reserved for present users
Abbreviation
pwrPres
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the reserved power volume, that is, the gain
level with the current used power as the reference. The available values
are 0, 1, 2, 3, and 4, representing gains 0 dB, 0.5 dB, 1 dB, 1.5 dB, and
Description
2 dB.
Instance
Cell
2-1959
SJ-20130408140048-016|2013-07-17(R1.0)
0:0
1:0.5
2:1
3:1.5
4:2
Unit
Db
Default Value
Default Value
By default, the power gain is 1 dB.
used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.47.5 Power Adjusting Threshold

Full Name
Power Adjusting Threshold
Abbreviation
pwrAdjustThreshold
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the power congestion control threshold. When
BSC detects that the percentage of power occupied by a TS's current
service in RRU to the total power has reached this value, it starts
Description
congestion control, such as perform CS outgoing handover.

2-1960
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
50..100
Unit
N/A
Default Value
100
Default Value
By default, 100% is a value considered as congestion.
If this parameter is not configured properly, services may be affected.
used.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
pwrAdmitThrldPunish < pwrAdmitThreshold < pwrAdjustThreshold
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.47.6 Threshold for Increase 8PSK Power

Full Name
Threshold for Increase 8PSK Power
Abbreviation
Inc8PskPwrThs
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
2-1961
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter determines whether to increase the power usage

threshold of 8PSK. The value 0 indicates that the threshold is
not allowed to be increased. If the iBSC detects that the value of
R_BTS2.Inc8PskPwrThs is not 0, it indicates that the interval of
increasing or decreasing the 8PSK power on this RRU or this cell in the
RRU exceeds the value of R_BTS2.Inc8PskPwrDelay.
If there are still PDTCH channels for power increase and the
increased power on the RRU does not exceed the value of
R_BTS2.Inc8PskPwrThs,
the system increases the 8PSK power for the PDTCH
channel. If the power on the RRU exceeds the value of
R_BTS2.Inc8PskPwrThs+R_BTS2.Inc8PskPwrHys, the system cancels
Description
the power increase this time.
Instance
Cell
0..100
Unit
N/A
Default Value
Default Value
By default, this function is disabled. Enable
it as required.
This parameter cannot be configured too high,
so as to avoid power congestion.
Change Mode
Offline
Related features
Related Parameters
Inc8PskPwrHys,pwrAdjustThreshold
Relationship
Inc8PskPwrThs + Inc8PskPwrHys < pwrAdjustThreshold
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-1962
SJ-20130408140048-016|2013-07-17(R1.0)
2.47.7 Hysteresis for Increase 8PSK Power

Full Name
Hysteresis for Increase 8PSK Power
Abbreviation
Inc8PskPwrHys
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to increase the delay of 8PSK
power. If the iBSC detects that the value of R_BTS2.Inc8PskPwrThs
is not 0, it indicates that the interval of increasing or decreasing the
8PSK power on this RRU or this cell in the RRU exceeds the value of
R_BTS2.Inc8PskPwrDelay. If there are still PDTCH channels for power
increase and the increased power on the RRU does not exceed the
value of R_BTS2.Inc8PskPwrThs, the system increases the 8PSK power
for the PDTCH channel. If the power on the RRU exceeds the value of
R_BTS2.Inc8PskPwrThs+R_BTS2.Inc8PskPwrHys, the system cancels
Description
the power increase this time.
Instance
Cell
0..100
Unit
N/A
Default Value
20
Default Value
The value 20% can generally avoid frequent
power increase or restoration.

This parameter cannot be configured too low,

so as to avoid frequent power increase or restoration. This parameter
cannot be configured too high, so as to avoid power congestion.
Change Mode
Offline
Related features
Related Parameters
Inc8PskPwrThs,pwrAdjustThreshold
Relationship
Inc8PskPwrThs + Inc8PskPwrHys < pwrAdjustThreshold
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
2-1963
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.47.8 Delay for Increase 8PSK Power

Full Name
Delay for Increase 8PSK Power
Abbreviation
Inc8PskPwrDelay
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to increase the delay time of 8PSK
power. If the iBSC detects that the value of R_BTS2.Inc8PskPwrThs
is not 0, it indicates that the interval of increasing or decreasing the
8PSK power on this RRU or this cell in the RRU exceeds the value of
R_BTS2.Inc8PskPwrDelay.
If there are still PDTCH channels for power increase and the
increased power on the RRU does not exceed the value of
R_BTS2.Inc8PskPwrThs, the system increases the 8PSK power for
Description
the PDTCH channel.
Instance
Cell
0, 5..255
Unit
Default Value
60
Default Value
The value 60s can generally avoid frequent
power increase or restoration.
This parameter cannot be configured too low,
so as to avoid frequent power increase or restoration.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-1964
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.47.9 Delay for Resume PDTCH Power

Full Name
Delay for Resume PDTCH Power
Abbreviation
PdPwrResumeDelay
Managed Object
Power Share
3GPP Name
N/A
3GPP Reference
N/A
Sets the delay time for PDTCH power resume. When the network is in
power congestion, the BSC must wait a period of time before the PDTCH
Description
power is resumed.
Instance
Cell
5..255
Unit
Default Value
60
Default Value
The change of channel power occupation is completed in 60 seconds.
Generally the default value is applied. If the maximum power on the
PDTCH channel fluctuates frequently, set this parameter higher.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
2-1965
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
Update
2.48 PS Handover Control (GPsHandoverControl)

2.48.1 PS Handover Control ID
Full Name
PS Handover Control ID
Abbreviation
GPsHandoverControl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
PS Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GPRS Configuration->PS Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1966
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.2 PS handover support

Full Name
PS handover support
Abbreviation
handoverSupp
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the cell supports the MS to perform PS
Description
handover.
Instance
Cell
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
RlcStateReset
EnablePCCNTrigHO
Relationship
The service function parameters used by the PS handover are valid until
this parameter is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1967
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.3 ACK of PS handover command

Full Name
ACK of PS handover command
Abbreviation
hoCommandAck
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether PS HANDOVER COMMAND requires
Description
acknowledgement.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.4 Blind transmission support

Full Name
Blind transmission support
2-1968
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
blindTransSupp
Managed Object
PS Handover Control
3GPP Name
Blind Transmission
3GPP Reference
3GPP TS 43.129
This parameter indicates whether the cell supports blind transmission.
The blind transmission means the target cell begins to transmit downlink
Description
data before the MS accesses to the cell.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.5 Optimized handover support

Full Name
Optimized handover support
Abbreviation
optimizeHOSupp
Managed Object
PS Handover Control
2-1969
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether optimized handover is supported in
the cell that supports PS handover.
If optimized handover is allowed, it is necessary to decide whether the
service cell and the destination cell have the same NSE and RA. If they
have, then perform optimized handover, and relevant QoS information
is required including PFI, PFT, ABQP, and ARP. Otherwise, perform
Description
normal handover.
Instance
Cell
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.6 Send handover access in synchronized handover

Full Name
Send handover access in synchronized handover
Abbreviation
sendAccessSync
2-1970
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
PS Handover Control
3GPP Name
PS Handover Access
3GPP Reference
3GPP TS 43.129
This parameter indicates whether the handover access message should
be sent during synchronised handover. After the MS receives the PS
handover message, it performs handover to the channel allocated in the
new cell. For example, the PS HANDOVER COMMAND message carries
Handover Reference, and the MS will send the PS HANDOVER ACCESS
Description
message to BSS.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.7 Send handover access in pre-synchronized handover

Full Name
Send handover access in pre-synchronized handover
2-1971
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
sendAccessPreSync
Managed Object
PS Handover Control
3GPP Name
PS Handover Access
3GPP Reference
3GPP TS 43.129
This parameter indicates whether the PS HANDOVER ACCESS message should be sent during pre-synchronized handover. After the MS
receives the PS handover message, it performs handover to the channel
allocated in the new cell. For example, the PS HANDOVER COMMAND
message carries Handover Reference, and the MS will send the PS HAN-
Description
DOVER ACCESS message to BSS.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1972
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.8 Reset RLC

Full Name
Reset RLC
Abbreviation
rlcStateReset
Managed Object
PS Handover Control
3GPP Name
RLC_RESET
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the state of RLC should be reset. That
is, the related variables of the RLC layer entity keep the same when the
Description
MS performs handover from the source cell to the target cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Holding rlc state is not implementation in PS Handover.
Currently, this parameter is displayed only
and does not need to be adjusted.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1973
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.9 Trigger PS handover by PCCN

Full Name
Trigger PS handover by PCCN
Abbreviation
enablePCCNTrigHO
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to use PCCN to trigger PS handover.
That is, upon receiving the PCCN Packet Cell Change Notification)
Description
messgae sent from the MS, BSC triggers PS handover judgement.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
A PS Handover is triggered by the BSC based on the received

measurement reports or initiated by the reception of the Packet Cell
Change Notification message from the mobile station.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1974
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
zeroAllowed
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
experience value
Excessive occurrences of zero indicate that

the adjacent cells are of poor signal strength. It is recommended

to set the value as small as possible, in order to select the adjacent
cell with good signal.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-1975
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevWindow
Managed Object
PS Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
12
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
N/A
2-1976
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevWindow
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the number of samples used for average calculation on the downlink signal strength measured during downlink power
Description
control judgement.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value

it once.
more the number of samples required for average calculation and thus
the smaller the fluctuation of the average value. However, the sensitivity
decreases. The smaller the value of this parameter, the less the number
of samples required for average calculation and thus the higher the
sensitivity. However, the fluctuation of the average value is large.
Change Mode
Offline
2-1977
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New

Full Name
Abbreviation
hoUlQualWindow
Managed Object
PS Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC determines whether to perform power
control according to measurement data. BSC uses the average value
of measurement data to avoid adverse influences caused by abrupt
changes in measurement data due to complex radio transmission.
BTS uses this parameter to calculate the window size for the average
value of uplink signal quality, i.e. to calculate the average value of the
Description
number of used samples.
Instance
Cell
1..31
Unit
N/A
Default Value
12
Default Value
experience value
2-1978
SJ-20130408140048-016|2013-07-17(R1.0)

of the downlink.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualWindow
Managed Object
PS Handover Control
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
4
2-1979
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.15 Distance
Full Name
Distance
Abbreviation
distanceWindow
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
MS and BTS.
Instance
Cell
2-1980
SJ-20130408140048-016|2013-07-17(R1.0)
1..31
Unit
N/A
Default Value
Default Value
experience value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Neighboring cell
Abbreviation
ncellWindow
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1981
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevThs
Managed Object
PS Handover Control
2-1982
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
series of average values obtained. Uplink receiving strength is one of the
causes for handover. The decision process is as follows: For the latest N
average values of uplink signal strength, if P of the N values rise above
relevant threshold value, perform handover to improve the uplink signal
strength. Ths parameter (HoUlQual) defines the related threhold value.
Usually the value of "HoUlQualThs" shall be lower than the threshold
Description
Instance
Cell
0..63
Unit
N/A
Default Value
18
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1983
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
hoUlLevP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1984
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlLevN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
2-1985
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
series of average values obtained. Downlink receiving strength is one
of the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal strength, if P of the N values
rise above relevant threshold value, perform handover to improve the
downlink signal strength. This parameter (HoUlQua) defines the related
threhold value. The default value of this parameter can be 15 (that is,
-96 dBm~-95 dBm). It should be 3 dB more than the minimum access
level (RxLevAccessMin) of the cell.
Description
Instance
Cell
0..63
Unit
N/A
Default Value
18
2-1986
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlLevP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1987
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1988
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
hoDlLevN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-1989
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
series of average values obtained. Uplink receiving quality is one of the
causes for handover. The decision process is as follows: For the latest
N average values of uplink signal quality, if P of the N values rise above
quality. Ths parameter (HoUlQual) defines the related threhold value.
Description
Instance
Cell
0..31
Unit
N/A
Default Value
15
Default Value
experience value


of the downlink.
Change Mode
Offline
2-1990
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
2-1991
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoUlQualN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1992
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1993
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
hoDlQualThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
series of average values obtained. Downlink receiving quality is one of
the causes for handover. The decision process is as follows: For the
latest N average values of downlink signal quality, if P of the N values
downlink signal quality. Ths parameter (HoUlQual) defines the related
threhold value.
first. If power control does not work, perform handover. The HoUlQualN
Description
Instance
Cell
0..31
Unit
N/A
Default Value
15
Default Value
experience value
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1994
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
threhold value.
(the PcDlInclQualThs parameter in the R_POC tabel) for downlink power
control (increase). That is, perform power control first. If power control
does not work, perform handover. The HoUlQualN parameter defines the
Description
related N value. The HoUlQualP parameter defines the related P value.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value
of the downlink.
Change Mode
Offline
2-1995
SJ-20130408140048-016|2013-07-17(R1.0)

Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
hoDlQualN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
threhold value.
(the PcDlInclQualThs parameter in the R_POC tabel) for downlink power
control (increase). That is, perform power control first. If power control
does not work, perform handover. The HoUlQualN parameter defines the
Description
related N value. The HoUlQualP parameter defines the related P value.
Instance
Cell
1..31
Unit
N/A
2-1996
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.29 Uplink receive level of intra-ho Threshold

Full Name
Uplink receive level of intra-ho Threshold
Abbreviation
intraHoUlLevThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-1997
SJ-20130408140048-016|2013-07-17(R1.0)

a series of average values obtained. Uplink interference with same
frequency is one of the causes for handover. The decision process is as
follows: For the latest N average values of uplink signal strength, if P
of the N values rise above relevant threshold value, perform handover
to reduce the uplink interference with same frequency. Ths parameter
(IntraHoUlLevThs) defines the related threhold value.
Usually the value of "IntraHoUlLevThs" shall be greater than the
threshold for causing uplink power control. The IntraHoUlLevN
parameter defines the related N value. The IntraHoUlLevP parameter
Description
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-1998
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.30 Uplink receive level of intra-ho Value P

Full Name
Uplink receive level of intra-ho Value P
Abbreviation
intraHoUlLevP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Usually the value of "IntraHoUlLevThs" shall be greater than the
threshold for causing uplink power control. The IntraHoUlLevN
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-1999
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.31 Uplink receive level of intra-ho Value N

Full Name
Uplink receive level of intra-ho Value N
Abbreviation
intraHoUlLevN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Usually the value of "IntraHoUlLevThs" shall be greater than the threshold
for causing uplink power control (decrease). The IntraHoUlLevN
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
2-2000
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.32 Downlink receive level of intra-ho Threshold

Full Name
Downlink receive level of intra-ho Threshold
Abbreviation
intraHoDlLevThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
series of average values obtained. Downlink interference with same
follows: When the handover condition of downlink quality is satisfied,
for the latest N average values of downlink signal strength, if P of the
N values rise above relevant threshold value, perform handover to
reduce the uplink interference with same frequency. Ths parameter
Usually the value of "IntraHoUlLevThs" shall be lower than or
equal to the threshold for causing uplink power control (decrease).
The IntraHoUlLevN parameter defines the related N value. The
Description
IntraHoUlLevP parameter defines the related P value.
Instance
Cell
0..63
Unit
N/A
Default Value
40
2-2001
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
experience value


of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.33 Downlink receive level of intra-ho Value P

Full Name
Downlink receive level of intra-ho Value P
Abbreviation
intraHoDlLevP
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
2-2002
SJ-20130408140048-016|2013-07-17(R1.0)

Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2003
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.34 Downlink receive level of intra-ho Value N

Full Name
Downlink receive level of intra-ho Value N
Abbreviation
intraHoDlLevN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value
of the downlink.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2004
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rapidHoThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold fot signal strength. When
the measurement value of the called signal strength is continuously
lower than this threshold, fast fading handover can be performed. The
candidate cell is the special related cell among adjacent cells.
The default value of this parameter can be set to 15 (that is -96 dBm~-95
dBm), same as the level threshold for common handover. RapdiHoN is
a counter value. That is, the numer of times that the measurement value
Description
of the called signal strength is continuously lower than the threshold.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value
experience value


Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2005
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
rapidHoN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold fot signal strength. When
the measurement value of the called signal strength is continuously
lower than this threshold, fast fading handover can be performed. The
candidate cell is the special related cell among adjacent cells.
The default value of this parameter can be set to 15 (that is -96 dBm~-95
dBm), same as the level threshold for common handover. RapdiHoN is
a counter value. That is, the numer of times that the measurement value
Description
of the called signal strength is continuously lower than the threshold.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value
Change Mode
Offline
Related features
N/A
2-2006
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.37 Macro to micro handover Threshold

Full Name
Macro to micro handover Threshold
Abbreviation
macroMicroHoThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
During macro-micro handover, some parameters shall be used. Tha is,
a signal strength threshold and a counter value. Macro-micro handover
threshold is a value of signal intensity threshold. If the measured signal
intensity of an adjacent micro cell is higher than MacroMicroHoThs
(threshold value) for certain times, then it triggers handover to the
adjacent micro-cell.
In this way, it could move slow moving MS into micro cell layer. The
times can be determined by MacroMicroHoN parameter in each adjacent
cell. The setting of parameter "MacroMicroHoN" in the local micro cell
is related to the local cell size and the standard used in measuring the
Description
MS moving speed.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
experience value
2-2007
SJ-20130408140048-016|2013-07-17(R1.0)
The higher the threshold is, it is more likely

to perform macro-micro handover. The setting of the parameter

"MacroMicroHoN"
in the cell is related to this cell size and the standard used in
measuring the MS moving speed.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.38 Macro to micro handover Value N

Full Name
Macro to micro handover Value N
Abbreviation
macroMicroHoN
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
During macro-micro handover, some parameters shall be used. Tha is,
a signal strength threshold and a counter value. Macro-micro handover
threshold is a value of signal intensity threshold. If the measured signal
intensity of an adjacent micro cell is higher than MacroMicroHoThs
(threshold value) for certain times, then it triggers handover to the
adjacent micro-cell.
In this way, it could move slow moving MS into micro cell layer. The
times can be determined by MacroMicroHoN parameter in each adjacent
cell. The setting of parameter "MacroMicroHoN" in the local micro cell
is related to the local cell size and the standard used in measuring the
Description
MS moving speed.
2-2008
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
1..255
Unit
N/A
Default Value
Default Value
experience value
The higher the threshold is, it is more likely

to perform macro-micro handover. The setting of the parameter

"MacroMicroHoN"
in the cell is related to this cell size and the standard used in
measuring the MS moving speed.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
distanceThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-2009
SJ-20130408140048-016|2013-07-17(R1.0)
The distance from the MS to the BTS is also one of the causes for
handover. The decision process is as follows: For the latest N average
values of TA (distance), if P of the N values rises above relevant
threshold value, perform handover.
Description
The handover is due to MS being out of the serving range of the cell.
Instance
Cell
0..63
Unit
N/A
Default Value
60
Default Value
When the TA reaches the maximum TA that the
cell supports, handover is initiated.

After the distance handover algorithm is enabled,
configuration of this parameter is dependent upon the actual requirement.
Generally, the distance handover algorithm is seldom used, so it is

recommended to reserve the default value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
distanceP
Managed Object
PS Handover Control
3GPP Name
N/A
2-2010
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter indicates the value P in the distance handover of PS handover. In the handover, if there are P values of N TA satisfying the handover determination condition, the dstance handover conditions are sat-
Description
isfied.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
The purpose is to ensure that the handover can be quickly and correctly
triggered.
In normal situations, adjust the parameter, which affects the times of
handover attempts and implementations. A greater value indicates that
handovers are more difficult to be performed and the call drop rate is
increased.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
distanceN
Managed Object
PS Handover Control
3GPP Name
N/A
2-2011
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter indicates the value N in the distance handover of PS handover. In the handover, if there are P values of N TA satisfying the handover determination condition, the dstance handover conditions are sat-
Description
isfied.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
triggered.
In normal situations, adjust the parameter, which affects the times of
handover attempts and implementations. A greater value indicates that
handovers are more difficult to be performed and the call drop rate is
increased.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pbgtHoP
Managed Object
PS Handover Control
3GPP Name
N1..N8,P1..P8
2-2012
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter indicates the values N and P in the PBGT handover of
PS handover. In the handover, if there are P values of PBGT in N PBGT
satisfying the handover determination condition, the PBGT handover con-
Description
ditions are satisfied.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
pbgtHoN
Managed Object
PS Handover Control
2-2013
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N1..N8,P1..P8
3GPP Reference
3GPP TS 45.008
This parameter indicates the values N and P in the PBGT handover of
PS handover. In the handover, if there are P values of PBGT in N PBGT
satisfying the handover determination condition, the PBGT handover con-
Description
ditions are satisfied.
Instance
Cell
1..31
Unit
N/A
Default Value
Default Value
experience value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.44 MIN interval between inter-cell handover

Full Name
MIN interval between inter-cell handover
Abbreviation
hoMinInterval
2-2014
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the interval value for which MS waits before
affects only the inter-cell handover, but not common intra-cell or inter-cell
concentric handover. In addition, micro-cell has its own handover policy,
so this parameter is only effective for macro-cell layer and its above layer.
For macro-cell, the Default Value can be 5; for micro-cell, the Default
Description
Value can only be 0.
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value
experience value
The value is to keep the MS from handover to
the original cell. The longer the time is, the longer is the handover
to the original cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2015
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.45 Prior layer selecting parameter on signal level/quality

Full Name
Prior layer selecting parameter on signal level/quality
Abbreviation
layerPriority
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the priority to select and sequence the
candidate cells for handover. Received signal level and signal quality
decides the candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell, then
to those at the same layer, and finally to other adjacent cells;
First hand over to adjacent cells at the same layer of the local cell, then
to those at the upper layer, and finally to other adjacent cells;
All adjacent cells are treated in the same way.
This parameter determines to select one of above three methods.
During handover control process, this parameter has higher priority than
normal adjacent cells.
Value Range:
1 (UPPER_LAYER): adjacent cell at above layer first, same layer
next,other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at same layer first, above layer next,
other adjacent cells finally;
3 (ALL_LAYER): all adjacent cells are same.
Note: In general, micro cell adopts option 1 and macro cell adopts
Description
option 2.
Instance
Cell
1: UPPER_LAYER
2: SAME_LAYER
3: ALL_LAYER
Unit
N/A
Default Value
Default Value
experience value
Generally, the adjacent cells at the same layer
take priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2016
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.46 Handover to same layer other band neighbour cell for

PBGT permitted
Full Name
Handover to same layer other band neighbour cell for PBGT permitted
Abbreviation
pbgtHoLayerSame
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether it is allowed to perform PBGT handover
Description
to the same layer adjacent cell with different frequency band.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
experience value
Generally, PBGT handover is performed to the
same layer or is performed to the adjacent cell with no layer relationship.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-2017
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.47 Handover to neighbour cell with no Layer Relation for

PBGT permitted
Full Name
Handover to neighbour cell with no Layer Relation for PBGT permitted
Abbreviation
pbgtHoLayerUndefine
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether it is allowed to perform PBGT handover
Description
to adjacent cell with no layer relationship.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
experience value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2018
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.48 Handover to upper layer neighbour cell for PBGT permitted

Full Name
Handover to upper layer neighbour cell for PBGT permitted
Abbreviation
pbgtHoLayerUp
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the PBGT handover to the upper layer
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
experience value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2019
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.48.49 Handover to under layer neighbor cell for PBGT permitted

Full Name
Handover to under layer neighbor cell for PBGT permitted
Abbreviation
pbgtHoLayerLow
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether the PBGT handover to the lower layer
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
experience value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2020
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.50 Synchronism
Full Name
Synchronism
Abbreviation
hoSyncInd
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow synchronous handover in this
cell. If the TA of the target cell obtained by the BSC is equal to that of
the source cell, the synchronous handover can be performed towards the
Description
target cell.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Synchronization handover is enabled for the
cell which supports intra-cell handover.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2021
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.51 Asynchronism
Full Name
Asynchronism
Abbreviation
hoNSyncInd
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow asynchronous handover
in this cell. If the BSC cannot obtain the TA of the target cell, only
Description
asynchronous handover can be performed towards the target cell.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Generally, asynchronous handover is enabled
in the cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2022
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.52 Pseudo-synchronism (HoPatternInd_2)

Full Name
Pseudo-synchronism (HoPatternInd_2)
Abbreviation
hoFSyncInd
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow asynchronous handover
in this cell. If the MS can calculate the target cell's TA and supports
asynchronous handover, the synchronous handover can be performed
Description
towards the target cell.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
is disabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2023
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.53 Pre-synchronism (HoPatternInd_3)

Full Name
Pre-synchronism (HoPatternInd_3)
Abbreviation
hoPSyncInd
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow pre-synchronous handover in
this cell. If the BSC knows the target cell's TA, and the TA is considered
when the handover command is issued, the pre-synchronous handover
Description
can be performed.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
is disabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2024
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.54 Allow intra-Cell handover attempt due to uplink interference

Full Name
Allow intra-Cell handover attempt due to uplink interference
Abbreviation
psHoControlIntfUl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow inter-cell handover due to uplink interference. The value is the 1st bit of the HoControl parameter of
Description
DWORD type.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2025
SJ-20130408140048-016|2013-07-17(R1.0)

interference
Full Name
Allow intra-Cell handover attempt due to downlink interference
Abbreviation
psHoControlIntfDl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow inter-cell handover due to
downlink interference. The value is the 2nd bit of the HoControl parame-
Description
ter of DWORD type.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2026
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.56 Allow standard PBGT handover

Full Name
Allow standard PBGT handover
Abbreviation
psHoControlPbgt
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow standard PBGTPS handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.57 Allow handover due to distance

Full Name
Allow handover due to distance
Abbreviation
psHoControlDistance
2-2027
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates whether to allow PS handover due to distance.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.58 Allow automatic handover based on traffic

Full Name
Allow automatic handover based on traffic
Abbreviation
psHoControlLoad
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-2028
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether to allow automatic handover based on

traffic. The value is the 5th bit of the HoControl parameter of DWORD
Description
type.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.59 Enable rapid handover

Full Name
Enable rapid handover
Abbreviation
psHoControlRapid
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to allow handover due to rapid level
Description
fading.
2-2029
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
The handover needs not be enabled in normal situation.
is required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.60 Enable macro to micro handover

Full Name
Enable macro to micro handover
Abbreviation
psHoControlMacroMicro
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to do the delay waiting in the macro-
Description
micro PS handover.
Instance
Cell
0: not allowed
1: allowed
2-2030
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
The handover needs not be enabled in normal situation.
is required.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.61 Enable queue in handover

Full Name
Enable queue in handover
Abbreviation
queInHo
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether it is allowed to jump the queue in PS
Description
handover.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
2-2031
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
There are many target cells for handovers and
the time interval between handover attempts is short.
Enabling this function can relieve channel
congestions in busy hours.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.62 Enable queue in handover preemption in handover

Full Name
Enable queue in handover preemption in handover
Abbreviation
preeptInHo
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether it is allowed to preempt the channel
Description
occupied by the low-priority user.
Instance
Cell
0: not allowed
1: allowed
Unit
N/A
Default Value
Default Value
Preemption brings an impact on the low-priority
user. Usually, the default value can be disabled.
2-2032
SJ-20130408140048-016|2013-07-17(R1.0)

The value can be enabled if you wish the high-priority

user to obtain channels easily during handover, the function can be
enabled.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.63 Penalty time for handover failure

Full Name
Penalty time for handover failure
Abbreviation
hoFailPenalTime
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the penalty time for the target cell if the MS fails
to handover to the target cell. During the penalty time, the priority of inter-cell handoverwithin BSC is reduced. This parameter determines the
Description
penalty duration.
Instance
Cell
1..100
Unit
N/A
Default Value
Default Value
experience value
2-2033
SJ-20130408140048-016|2013-07-17(R1.0)

The longer the time is set, the longer is the

penalty on the cell, the longer is the failure of handover to the
cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.64 Layer control value for handover on traffic

Full Name
Layer control value for handover on traffic
Abbreviation
trafficHoLayrCtl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
Layer selecting parameter on service quality handover. This parameter,
together with frequency control value for handover on traffic, decides the
adjacent cells frequency band and layer selected during traffic handover.
When traffic handover condition is satisfied, as for the layer relation,
four choices are available for call selection and candidate cell
arrangement. This parameter decides which choice shall be made.
When implementing traffic-based handover control in traffic process, this
parameter has higher priority than that of adjacent cells.
0: N, Not defined;
1: SAME, Adjacent cell and this cell are in the same layer (PBGT
Description
handover is possible);
2-2034
SJ-20130408140048-016|2013-07-17(R1.0)
2: UPPER, Adjacent cell is upper layer of this cell (when this cell is
micro-cell);
3: LOWER, Adjacent cell is lower layer of this cell (when this cell is
macro-cell)
Instance
Cell
0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
3: Lower layer of the home cell
Unit
N/A
Default Value
Default Value
normal setting
Usually, handover is performed to the cell
in the same layer. Traffic handover can be performed to the cell in
the different layer as needed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.48.65 Frequency control value for handover on traffic

Full Name
Frequency control value for handover on traffic
Abbreviation
trafficHoFreqCtl
Managed Object
PS Handover Control
3GPP Name
N/A
2-2035
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates the control value of layer for traffic handover,
i.e. which frequency band shall be handed over to.
0: GSM900 frequency band P-GSM (ARFCN = 1 ~ 124)
1: EXT900 frequency band E-GSM (ARFCN = 0 ~ 124, 975 ~ 1023)
2: DCS1800 frequency band DCS1800 (ARFCN = 512 ~ 885)
PCS1900 frequency band PCS1900 (ARFCN = 512 ~ 810)
Description
GSM850 frequency band (ARFCN = 128 ~ 251)
Instance
Cell
0: GSM900
1: EXT900
2: DCS1800
4: PCS1900
7: GSM850
Unit
N/A
Default Value
Default Value
Setting of the value is dependant on the actual
circumstances.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2036
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.66 Threshold of traffic for handover

Full Name
Threshold of traffic for handover
Abbreviation
trafficThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
If TCH occupation rate of a cell is greater than this parameter value (number of occupied TCH channels / number of total TCH channels, not including blocked idle channels), then it indicates the cell is too busy, and traffic
Description
handover is triggered for the cell.
Instance
Cell
0..100
Unit
Default Value
80
Default Value
experience value
The traffic threshold of the cell cannot be
too high, so as to prevent congestion in the cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2037
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.67 Traffic handover threshold

Full Name
Traffic handover threshold
Abbreviation
trafficLevThs
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
This parameter is used for traffic handover during PS services. If the adjacent cell' s level is higher than this threshold (that is, RxLevelNcell-DwlinkLevel>=TrafficLevThs), and the adjacent cell's level satisfies its minimum
Description
access level, handover can be performed to the adjacent cell.
Instance
Cell
0..48
Unit
N/A
Default Value
24
If the target cell's level is not lower than
Default Value
the serving cell, traffic handover can be performed to balance traffic.
If this threshold is too high, it is difficult to select a user for

outgoing handover.
When the outgoing handover is prefered to be performed on the cell
with large traffic, the value should be adjusted as small. Otherwise,

the value should be adjusted as large.This threshold must be less than

the PBGT threshold in reverse direction. Otherwise, it may result in
toggle handover.
For the scenario with dense traffic, the value can be reduced properly.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2038
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.48.68 Level offset during penalty

Full Name
Level offset during penalty
Abbreviation
penaltyLevOffset
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the MS is performing PS services, if the target cell is in the penalty
for handover failure, an offset is made on the downlink level of the target
Description
cell.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value

Generally, the cell in penalty can be no longer

ordered in the front of the handover list if other adjacent cells
with good signal are available.
If many adjacent cells to which handover can
be performed are available, the value should be large. Otherwise,
the value should be small.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2039
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
qoffSetUl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The value is 0~6, and the quality offset is -3~3. The uplink receiving
quality is poor during PS services, and the level is high. Consequently,
the MS camps on the interference area predefined. Uplink interference
handover can be performed if AvRxQualUL(s)<InterfFQSS(s). Where,
InterfFQSS(s) is the bit error rate threshold FQSS calculated by the
average uplink level AvRxLevUL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
Where, XOffset and YOffset respectively represent the level offset
(SOffSetUl) and quality offset (QOffSetUl) of uplink interference
Description
judgement stipulated by cell parameters.
Instance
Cell
0..6
Unit
N/A
Default Value
Default Value
environment.
The larger the value is, the lower is the quality
tolerability under the corresponding level, and it is easier to initiate
quality handover which should be adjusted in accordance with the actual

network situation.
Change Mode
Offline
Related features
Related Parameters
N/A
2-2040
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
soffSetUl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The value is 0~20, and the level offset is -10~10dB. The uplink receiving
the MS camps on the interference area predefined. Uplink interference
handover can be performed if AvRxQualUL(s)<InterfFQSS(s). Where,
average uplink level AvRxLevUL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
(SOffSetUl) and quality offset (QOffSetUl) of uplink interference
Description
Instance
Cell
0..20
Unit
N/A
Default Value
15
2-2041
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
environment.

The larger the value is, the lower the requirement

on quality handover is, and it is easier to initiate quality handover
which should be adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
qoffSetDl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
The value is 0~6, and the quality offset is -3~3. The downlink receiving
the MS camps on the interference area predefined. Downlink interference
handover can be performed if AvRxQualDL(s)<InterfFQSS(s. Where,
AvRxLevDL(s) is the average downlink bit error rate (MEAN_BEP),
average downlink level AvRxLevDL(s). The calculation formula is as
follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevDL(s)<XOffset+30
Description
2-2042
SJ-20130408140048-016|2013-07-17(R1.0)
=YOffset+5 if XOffset+40<=AvRxLevDL(s)
(SOffSetDI) and quality offset (QOffSetDl) of downlink interference
Instance
Cell
0..6
Unit
N/A
Default Value
Default Value
environment.
The larger the value is, the lower is the quality
tolerability under the corresponding level, and it is easier to initiate
quality handover which should be adjusted in accordance with the actual

network situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
soffSetDl
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
2-2043
SJ-20130408140048-016|2013-07-17(R1.0)
The value is 0~20, and the quality offset is -10~10dB. The downlink
receiving quality is poor during PS services, and the level is
high. Consequently, the MS camps on the interference area
predefined. Downlink interference handover can be performed if
AvRxQualDL(s)<InterfFQSS(s. Where, AvRxLevDL(s) is the average
downlink bit error rate (MEAN_BEP), InterfFQSS(s) is the bit error rate
threshold FQSS calculated by the average downlink level AvRxLevDL(s).
The calculation formula is as follows:
InterfFQSS(s)=0 if AvRxLevDL(s)<XOffset+20
=YOffset+5 if XOffset+40<=AvRxLevDL(s)
(SOffSetDI) and quality offset (QOffSetDl) of downlink interference
Description
Instance
Cell
0..20
Unit
N/A
Default Value
10
Default Value
environment.

The larger the value is, the lower the requirement

on quality handover is, and it is easier to initiate quality handover
which should be adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2044
SJ-20130408140048-016|2013-07-17(R1.0)
2.48.73 Invalid intra-handover time

Full Name
Invalid intra-handover time
Abbreviation
tMaxIHo
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the MS performs PS services, the timer TMaxIHo starts after
the MS performs interference handover in the cell for the first time.
If handover occurs again before the counter ecxpires, the previous
handover is considered to have no influence on interference, the counter
HoCount increases by 1 and the counter TMaxIHo restarts. If handover
occurs after the counter expires, the previous handover is considered
valid, clear the counter IHoCount to 0 and restart the counter TMaxIHo.If
the counter reaches MaxIHo, it indicates that no more attempt is needed,
Description
and the inter-cell handover shoudl be performed.
Instance
Cell
1..100
Unit
N/A
Default Value
Default Value
If the handover occurs continuously within
3 seconds, it is considered as too frequent.
be judged as valid handover.
If the value is set as too large, the valid handover is easily to be judged
If the default value is set as too small, the invalid handover is easily to
as invalid handover.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2045
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.48.74 MAX count of invalid intra-handover

Full Name
MAX count of invalid intra-handover
Abbreviation
maxIHo
Managed Object
PS Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the MS performs PS services, the timer TMaxIHo starts after
the MS performs interference handover in the cell for the first time.
If handover occurs again before the counter ecxpires, the previous
handover is considered to have no influence on interference, the counter
HoCount increases by 1 and the counter TMaxIHo restarts. If handover
occurs after the counter expires, the previous handover is considered
valid, clear the counter IHoCount to 0 and restart the counter TMaxIHo.If
the counter reaches MaxIHo, it indicates that no more attempt is needed,
Description
and the inter-cell handover shoudl be performed.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
Usually, if the handover occurs three times
continuously, it is considered as too frequent.

If the value is too small, the handover is easily to be judged as invalid
and the MS is performed on penalty, which is likely to cause call drop.
If the value is too large, the handover is difficult to be judged as invalid

interference handover and the number of invalid handover increases.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2046
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49 Trx (GTrx)

2.49.1 TRX ID
Full Name
TRX ID
Abbreviation
GTrx
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
Description
TRX ID
Instance
None
1..60
Unit
N/A
Default Value
NA
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
2-2047
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.2 TRX Sequence

Full Name
TRX Sequence
Abbreviation
GTrxSeq
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
Description
TRX ID
Instance
Trx
1..60
Unit
N/A
Default Value
NA
Default Value
The value is generated by the system by default.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2048
SJ-20130408140048-016|2013-07-17(R1.0)
2.49.3 GBtsPanel DN
Full Name
GBtsPanel DN
Abbreviation
refGBtsPanel
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the DN that refers to the carrier panel.
Instance
Trx
None
Unit
N/A
Default Value
NA
Default Value
This parameter is applicable for base stations with the versions earlier
than V3.
This parameter is applicable for base stations with the versions earlier
than V3.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.4 GSubCell DN
Full Name
GSubCell DN
Abbreviation
refGSubCell
Managed Object
Trx
2-2049
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter references to the subcell DN.
Instance
Trx
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.5 TRX type

Full Name
TRX type
Abbreviation
trxType
Managed Object
Trx
3GPP Name
None
3GPP Reference
N/A
2-2050
SJ-20130408140048-016|2013-07-17(R1.0)
Common TRX is suitable for common cells. Extended TRX is suitable

for extended cells.
In a common cell, TRX type shall be configured as normal TRX.
When a subcell is not supported under the extended cell, TRX type shall
be configured as the extended TRX. When the subcell is supported
under the extended cell, subcell 1 shall be configured as the extended
Description
TRX, and there are no special requirements for subcell 2.
Instance
TRX
0: Common TRX
1: Extended TRX
Unit
N/A
Default Value
Default Value
This parameter has a fixed configuration.

This parameter has a fixed configuration.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.6 Static power level

Full Name
Static power level
Abbreviation
pwrReduction
Managed Object
Trx
3GPP Name
N/A
2-2051
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
This parameter indicates the static power level of transceiver. Usually
a static power control is added on the basis of TRX transmission power
specified by static power level. Namely, a restriction is added based on
the maximum transmission power, thus to get the actual maximum transmission power Pn of the TRX. The dynamic power control is implemented
based on the maximum transmission power Pn. When this value is set to
Description
a minus value, SDR's power shares gains.
Instance
TRX
0: Max output power
1: Max output power -2dB
250: Max output power +3dB
251: Max output power +2.5dB
Unit
N/A
Default Value
Default Value

If the static power of the weak coverage cell is configured relatively high,
it helps reduce calldrop rate and improve communication quality.
If the static power of the over-coverage cell is reduced by 2-4dB, which
helps reduce intra-network interference and improve communication
quality. For the over-coverage cell in the dense-populated urban area,
the static power can be reduced by 2-6dB, and the setting of all carriers
in the same cell must be same.
For rural areas and areas with complex topography, relatively high static
power level helps improve the success rate of SD/TCH assignment, the
success rate of call setup, coverage rate, and the paging success rate of
CN. For SDR sites, the static power level is adjusted on OMCB. Here, a
minus value represents the shared gain, with a maximum of 3 dB. The
more the carriers on RRU, the greater the gained value can be set. The
less the carriers on RRU, the smaller the gained value can be set.
Change Mode
Offline
2-2052
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
ZGB-04-02-002 Static BTS Power Control
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
Update
2.49.7 Assign Priority of the Trx

Full Name
Assign Priority of the Trx
Abbreviation
trxPriority
Managed Object
Trx
3GPP Name
None
3GPP Reference
N/A
This parameter indicates priorities for allocating carriers of the same type.
1 represents the highest priority. Select channels on carriers with high
Description
priority when allocating CS channels.
Instance
TRX
1..5
Unit
N/A
{BCCHMARK==0}3,
Default Value
{BCCHMARK==1}1
Default Value
The common carriers takes lower priority than
BCCH carrier.

The CS channel allocation refers to carrier

priority. The common carriers takes lower priority than BCCH carrier.
If some carriers need to accept the CS traffic, level up their priorities.
Change Mode
Offline
Related features
ZGO-03-02-002 Enhancement on Channel Allocation

2-2053
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.8 Power level

Full Name
Power level
Abbreviation
powerClass
Managed Object
Trx
3GPP Name
power class45.005
3GPP Reference
3GPP TS 45.005
This parameter indicates the power level of carrier. The value can be
converted to an actual power value used to calculate path loss and CI
Description
value in measurement report.
Instance
TRX
1..8
Unit
N/A
Default Value
Default Value
The level 3 carrier is frequently used.
Set this parameter according to the BTS configuration.
The combiner loss should also be considered.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2054
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.9 Pair Trx

Full Name
Pair Trx
Abbreviation
refGTrx
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates a pair of allocatable carriers during DLDC ser-
Description
vices.
Instance
Trx
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-2055
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.10 RTTI preference

Full Name
RTTI preference
Abbreviation
rttiPrefer
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the carrier is preferentially selected
by RTTI MS. If this parameter is configured as RTT preferred carrier, this
carrier is allocated to perform services when the MS that supports RTT
establishes RTTI TBF. When the MS that does not support RTT performs
PS services, this carrier is selected for allocation only when no other car-
Description
rier can be allocated.
Instance
TRX
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
RTTISupport
Relationship
This parameter is valid after the BSC-level

switch and cell-level switch with RTTIfunction are enabled.
Related Interfaces
N/A
Impact on Equipment
0
2-2056
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.11 TSC
Full Name
TSC
Abbreviation
tsc
Managed Object
Trx
3GPP Name
Training Sequence Code
3GPP Reference
3GPP TS 45.002
This parameter indicates the training serial code (TSC) of the timeslot.
There are eight types of TSC, with low mutual dependency. It is used
for reference of delay compensation for adaptive balance circuit at the
receiving side. For the timeslot which BCCH occupies, this parameter
Description
must be equal to BCC of a cell.
Instance
TS
0..7
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
BCC
Relationship
TSC value on BCCH channel shall be same as BCC value.
Related Interfaces
Um
Impact on Equipment
Impact on service
2
2-2057
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.12 TSC2
Full Name
TSC2
Abbreviation
tsc2
Managed Object
Trx
3GPP Name
Training Sequence Code
3GPP Reference
3GPP TS 45.002
This parameter is used for pairing of two non-VAMOS MSs. One MS uses
Description
TSC and the other MS uses TSC2.
Instance
TS
0..7
Unit
N/A
Default Value
NA
Default Value
None
When the VAMOS function is disabled, this parameter
is invalid. When the VAMOS function is enabled, the value configured
must be different from that of TSC.
Change Mode
Offline
Related features
Related Parameters
SupportVAMOS,
TSC
Relationship
This parameter is valid only when SupportVAMOS is enabled. The value

is different from that of TSC.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2058
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.49.13 ARFCN
Full Name
ARFCN
Abbreviation
arfcn
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the frequency point of this transceiver.
Instance
TRX
0..1023
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
2-2059
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.49.14 GHoppingFrequency DN
Full Name
GHoppingFrequency DN
Abbreviation
refGHoppingFrequency
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
When configuring RF hopping, select the hopping mode configured in the
hopping system as the hopping system ID. During hopping, the tranceiver
Description
uses the MA frequency point list configured in the hopping system.
Instance
TRX
None
Unit
N/A
Default Value
NA
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2060
SJ-20130408140048-016|2013-07-17(R1.0)
2.49.15 GHoppingBaseband DN
Full Name
GHoppingBaseband DN
Abbreviation
refGHoppingBaseband
Managed Object
Trx
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the DN referring to the baseband hopping sys-
Description
tem.
Instance
Trx
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.16 BCCH Mark

Full Name
BCCH Mark
Abbreviation
BCCHMARK
2-2061
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
Trx
3GPP Name
None
3GPP Reference
N/A
One BCCH carrier frequency must be configured in a cell and it should
Description
be the only one.
Instance
TRX
0: No
1: Yes
Unit
N/A
Default Value
NA
Default Value
The fixed attributes generated when the BCCH
carrier has been configured.

No need to modify.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.49.17 Combiner Loss

Full Name
Combiner Loss
Abbreviation
CombinerLoss
Managed Object
Trx
3GPP Name
N/A
2-2062
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Description
This parameter indicates the combiner loss of the carrier.
Instance
TRX
0..48
Unit
dB
Default Value
Default Value
This parameter is configured according to the
actual condition.
according to the actual combiner loss of the carrier.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
iBSCV6.20.710b
Parameter Modifying
Detail
New
2.49.18 HoppingFrequency MAIO

Full Name
HoppingFrequency MAIO
Abbreviation
maio
Managed Object
Trx
3GPP Name
Mobile Allocation Index Offset
3GPP Reference
3GPP TS 44.018
2-2063
SJ-20130408140048-016|2013-07-17(R1.0)
During communication, the carrier number adopted on air interface is an

element of the MA set. Mobile Allocation Index (MAI) (0 MAI n-1) is a
variable for determining a definite element in the MA set.
According to the FH algorithm in GSM 05.02 specification, MAI is
function of the following aspects:
TDMA Frame Number (FN) or Reduced TDMA Frame Number (RFN),
frequency Hopping Serial Number (HSN), and Mobile Allocation Index
Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels to contend for the same carrier at the same moment.
Generally, several basic FH units (timeslot or TDMA frame) constitute an
FH group. They have the same MA and HSN and the only difference
among them is MAIO. Thus the same MA and HSN are put in FHS/MA
table.
When the FH group corresponding to the timeslot has no frequency
Description
hopping, MAIO of the timeslot is invalid.
Instance
TRX
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
New
2-2064
SJ-20130408140048-016|2013-07-17(R1.0)
2.49.19 Support TS freq-hopping

Full Name
Support TS freq-hopping
Abbreviation
TsFHSupport
Managed Object
Trx
3GPP Name
None
3GPP Reference
N/A
Enables/Disables the TS frequency hopping function (The TS frequency
hopping function can be enabled even if the carrier frequency is configured not to conduct frequency hopping). Each TS can be configured to
enable or disable the frequency hopping function. If the frequency hopping function is disabled, the time slot use the frequency point configured
Description
for the carrier frequency.
Instance
TRX
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The TS frequency hopping function is seldom used.
Set this parameter as required by the operator. The function is generally
used for test.
Change Mode
Offline
Related features
Related Parameters
siteType
Relationship
The TS frequency hopping function can only be enabled on an SDR

base station.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2065
SJ-20130408140048-016|2013-07-17(R1.0)
2.50 Ts (GTs)
2.50.1 Ts ID
Full Name
Ts ID
Abbreviation
GTs
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
Description
Ts ID
Instance
None
0..7
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Trx->Ts
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.2 TS Sequence
Full Name
TS Sequence
2-2066
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
GTsSeq
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the timeslot number.
Instance
Ts
0..7
Unit
N/A
Default Value
NA
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.3 TS Channel Combination

Full Name
TS Channel Combination
Abbreviation
tsChannelComb
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
2-2067
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter defines combined types of timeslot channel. Correlation

with the following several parameters is as follows:
CBC supported (SmsCbUsed).
If "CBC support (SmsCbUsed)" is No, that is, CBC is not supported, the
system automatically searches all timeslot channel combinations in the
cell. If CBC channel exists, it is changed to SDCCH.
If "CBC support (SmsCbUsed)" is Yes, that is, CBC is supported, the
system automatically searches all timeslot channel combinations in
the cell. If a non-BCCH channel is found for a carrier, it is changed to
SDCCH+CBCH.
GPRS service support (PsSupport)
If "GPRS Supported (PsSupport)" is No, that is, GPRS is not supported,
the system automatically changes all timeslot channels whose type is
PS in the cell to TCH.
Common control channel configuration (CcchConf)
When CCCH Channel (CcchConf) is configured as "a basic physical
channel used by CCCH, along with SDCCH". In channel information
parameters,
timeslot 0 channel combination shall be one of these two combined
channels: BCCH+SDCCH/4 and BCCH+SDCCH/4+CBCH.
When CCCH Channel (CcchConf) is configured as "a basic physical
channel used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0 channel combination shall be one of these two
combined channels: FCCH+SCH+BCCH+CCCH and BCCH+CCCH.
When CCCH Channel (CcchConf) is configured as "two basic physical
channels used by CCCH, regarless of SDCCH". In channel information
parameters, timeslot 0 and 2 channel combination shall be these two
When CCCH Channel (CcchConf) is configured as "three basic physical
parameters, timeslot 0, 2, and 4 channel combination shall be these two
When CCCH Channel (CcchConf) is configured as "four basic physical
parameters, timeslot 0, 2, and 4 channel combination shall be these two
Description
Instance
TS
2-2068
SJ-20130408140048-016|2013-07-17(R1.0)
0:Full rate traffic channel(Full rate traffic channel)

1:TCH/H\(0,1\)+FACCH/H\(0,1\)+SACCH/TH\(0,1\)(TCH/H\(0,1\)+FACCH/H\(0,1\)+SACCH/TH\(0,1\))
3:SDCCH/8+SACCH/C8(SDCCH/8+SACCH/C8)
4:FCCH+SCH+BCCH+CCCH(FCCH+SCH+BCCH+CCCH)
5:BCCH+SDCCH/4(BCCH+SDCCH/4)
6:BCCH+CCCH(BCCH+CCCH)
7:BCCH+SDCCH/4+CBCH(BCCH+SDCCH/4+CBCH)
8:SDCCH + CBCH(SDCCH + CBCH)
14:PDTCH+PACCH+PTCCH(PDTCH+PACCH+PTCCH)
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
ZGB-03-02-005 Static Channel Management
ZGB-03-02-006 Dynamic Channel Management
Related features
ZGO-03-02-008 EGPRS on BCCH-TRX Configurable
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.4 MAIO
Full Name
MAIO
Abbreviation
maio
Managed Object
Ts
2-2069
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
Mobile Allocation Index Offset
3GPP Reference
3GPP TS 44.018
During communication, the carrier number adopted on air interface is an
element of the MA set. Mobile Allocation Index (MAI) (0 MAI n-1) is a
variable for determining a definite element in the MA set.
According to the FH algorithm in GSM 05.02 specification, MAI is
function of the following aspects:
TDMA Frame Number (FN) or Reduced TDMA Frame Number (RFN),
frequency Hopping Serial Number (HSN), and Mobile Allocation Index
Offset (MAIO).
MAIO is an initial offset of MAI and is used for preventing several
channels to contend for the same carrier at the same moment.
Generally, several basic FH units (timeslot or TDMA frame) constitute an
FH group. They have the same MA and HSN and the only difference
among them is MAIO. Thus the same MA and HSN are put in FHS/MA
table.
When the FH group corresponding to the timeslot has no frequency
Description
hopping, MAIO of the timeslot is invalid.
Instance
TS
0..63
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2070
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.5 Dynamic TS
Full Name
Dynamic TS
Abbreviation
changeable
Managed Object
Ts
3GPP Name
None
3GPP Reference
N/A
YES: this timeslot is a dynamic timeslot that either changes the PDCH
channel into implementing PS services as needed, or is used for CS
services.
NO: the fixedly configured timeslot. It corresponds to the dynamic
timeslot, only used fot the timeslot with fixed configuration.
This parameter is used for all timeslots configured in batches in a carrier,
Description
as well as used fot a single timeslot during configuration.
Instance
TS
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The time slot attribute is dynamic by default.

The attribute can be changed to static TCH channel or PDCH channel
based on the needs of CS or PS services, or on the needs of customer.
The attribute can be changed to static TCH
channel or PDCH channel based on the needs of CS or PS services, or
on the needs of customer. Dynamic half rate can be enabled with this
parameter being set "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
2-2071
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.6 Ps Service Preference Property

Full Name
Ps Service Preference Property
Abbreviation
preferPsService
Managed Object
Ts
3GPP Name
None
3GPP Reference
N/A
This parameter indicates preferential properties of the GPRS, EDGE,
and EDGE2 services during PS services.
255: No preferred. All PS service types can be occupied.
0: GPRS preferred. When HybridOccuSupp is disabled, EDGE services
cannot occupy this channel. When HybridOccuSupp is enabled, the
EDGE can occupy this channel but the priority is low.
1: EDGE preferred. When HybridOccuSupp is disabled, GPRS cannot
occupy this channel. When it is enabled, the GPRS can occupy this
channel but the priority is low.
2: only for EDGE. GPRS services cannot occupy this channel.
3: EGPRRS2-A preferred. The priority for common GPRS and EDGE
services occupying this channel is low.
4: only for EGPRRS2-A . Common GPRS and EDGE cannot occupy
this channel.
Description
Instance
TS
0: GPRS preference
1: EDGE preference
2: EDGE dedicated
255: No preference
Unit
N/A
Default Value
255
2-2072
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
GPRS amd EDGE services can share one dynamic
timeslot.
If an EDGE service needs a high transmission

rate, it is recommended to configure a certain number of static

EDGE-dedicated
channel. Also EDGE-preferred and GPRS-preferred can be configured
to separate the two types of services.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 D.
Parameter Modifying
Detail
Update
2.50.7 Pair No.

Full Name
Pair No.
Abbreviation
pairNo
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the pair No. to which timeslots belong.
Instance
Ts
2-2073
SJ-20130408140048-016|2013-07-17(R1.0)
{GTsSeq==0}[1][255],
{GTsSeq==1}[1][255],
{GTsSeq==2}[2][255],
{GTsSeq==3}[2][255],
{GTsSeq==4}[3][255],
{GTsSeq==5}[3][255],
{GTsSeq==6}[4][255],
{GTsSeq==7}[4][255]
Unit
N/A
Default Value
255
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.8 USF Mode Used In RTTI

Full Name
USF Mode Used In RTTI
Abbreviation
usfMode
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
2-2074
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates whether the USF mode used by RTT is RTTI
Description
USF or BTTI USF.
Instance
Ts
0: BTTI USF
1: RTTI USF
255: Not Valid
Unit
N/A
Default Value
255
Default Value
By default, the channel is used for assigning BTTI.

Set this parameter to 1 when the channel is used for RTTI USF
assignment under RTTI. Set this parameter to 0 when the channel is
used for BTTI USF assignment under RTTI. Use the default value 255
when the channel is used for normal BTTI channel assignment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.50.9 PDCH Precedence

Full Name
PDCH Precedence
Abbreviation
pdchPrecedence
Managed Object
Ts
3GPP Name
None
3GPP Reference
N/A
2-2075
SJ-20130408140048-016|2013-07-17(R1.0)
For dynamic timeslots, if the precedence is configured as TRUE, and

these timeslots are occupied by PS services, then this channel is not
preempted by CS services. In this case, the CS services preempting the
throughput in the cell with frequent PDTCH, and the access index related
to congestion will be improved. If PS can preempt CS services, and PS
services fail to apply for channels due to inadequate radio resources, the
PS can preempt the CS services on this channel.
Description
Instance
TS
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Usually this type of dynamic channel does not
need to be configured.
If this attribute of a dynamic timeslot is set as TRUE and is occupied by
PS services, the corresponding channel cannot used by CS services.
This configuration can improve the access performance index.
To ensure a certain amount of PS services running on the channel when

there are not enough channel resources, the PSPrmpCSSupport switch
can be turned on to make PS services grab resources from CS services.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2076
SJ-20130408140048-016|2013-07-17(R1.0)
2.50.10 GHoppingFrequency DN
Full Name
GHoppingFrequency DN
Abbreviation
refGHoppingFrequency
Managed Object
Ts
3GPP Name
N/A
3GPP Reference
N/A
Sets the frequency hopping system for a time slot when the TsFHSupport
Description
parameter is configured to enable the TS frequency hopping function.
Instance
TRX
None
Unit
N/A
Default Value
NA
Default Value
No default value. The frequency hopping system is configured by users.
Set this parameters in accordance with the frequency hopping systems
planned by the operator.
Change Mode
Offline
Related features
Related Parameters
MAIOTSFHSIDtsChannelCombChangeable
When the RFID frequency hopping (or TS frequency hopping) function is
enabled, TSs of TCH carrier frequencies in the same cell cannot have
Relationship
the same frequency hopping system, and the same MAIO. For example,
the TS0 of TRX1 and TS0 of TRX2 cannot both use the frequency
hopping system 1 and MAIO0.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2077
SJ-20130408140048-016|2013-07-17(R1.0)
2.50.11 Is Reserved
Full Name
Is Reserved
Abbreviation
Isrsv
Managed Object
GTs
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether a TS is the reserved channel for a
subscriber with a high priority. This configuration cannot be effective until
Description
the parameter USERESERVEDCHAN is set to 1.
Instance
Ts
0:No
1:Yes
Unit
N/A
Default Value
Default Value

The reserved channel can be selected as required. The carrier frequency
with a better RQ is reserved generally. A reserved channel can be
configured only on static TCHF channels and at the edge of the TS.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
1. GBssFunction.USERESERVEDCHAN
2. tsChannelComb,Changeable
1. The configuration of this parameter is effective only when the
Relationship
parameter USERESERVEDCHAN is set to 1.

2. This parameter can be set to 1 only when both the parameters
tsChannelComb and Changeable are set to 0.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2078
SJ-20130408140048-016|2013-07-17(R1.0)
2.51 Adjacent GSM Cell Configuration (GGsmRelation)

2.51.1 Relation type
Full Name
Relation type
Abbreviation
RelationType
Managed Object
Adjacent GSM Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the relation type of the adjacent cell and the
source cell. It is one of the handover cell, reselection cell, and han-
Description
dover/reselection cell.
Instance
GsmRelation
0: Handover and reselect
1: Reselect
2: Handover
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->Adjacent Relation Configuration->Adjacent GSM Cell

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2079
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.2 Adjacent GSM Cell Configuration ID

Full Name
Adjacent GSM Cell Configuration ID
Abbreviation
GGsmRelation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Adjacent GSM Cell Configuration ID
Instance
None
1..192
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.3 DN of source Gsmcell

Full Name
DN of source Gsmcell
Abbreviation
refGGsmCell
2-2080
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Users can click Select to select cell or external cell in displayed interface,
check Mutual Configuration, you can mutually configure it as reselection
Description
and handover cell.
Instance
GsmRelation
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.4 DN of source ExternalGsmcell

Full Name
DN of source ExternalGsmcell
Abbreviation
refGExternalGsmCell
Managed Object
3GPP Name
N/A
2-2081
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Users can click Select to select cell or external cell in displayed interface,
check Mutual Configuration, you can mutually configure it as reselection
Description
and handover cell.
Instance
GsmRelation
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.5 Relation Sequence

Full Name
Relation Sequence
Abbreviation
GGsmRelationSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2082
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the adjacent cell sequence used inside IBSC, to
Description
manage adjacent cells.
Instance
GsmRelation
{RelationType==1}[1..64],
{RelationType==0}[129..192]
Unit
N/A
Default Value
NA
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.6 Priority of handover

Full Name
Priority of handover
Abbreviation
HoPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2083
SJ-20130408140048-016|2013-07-17(R1.0)
According to GSM specifications, cell priority should be considered in

sequencing candidate cells.
Therefore, there are three decisive factors to sequence candidate cells:
priority, traffic, and radio communication environment. Priority and traffic
have the most impact on cell sequencing. If they lead to the same result,
sequence cells by radio conditions. The priority of a cell is higher if this
Description
value is set higher.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
normal setting
In most cases, this parameter is set to 3,
and the cell priority are the same.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.7 MIN power level for handover access

Full Name
MIN power level for handover access
Abbreviation
RxLevMin
Managed Object
3GPP Name
RXLEV_ACCESS_MIN
2-2084
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter indicates the minimum receiving intensity level (on
BCCH) required for MS to handover to this cell. It is one of parameters
to decide preferred cells during handover control. MS in the serving
cell constantly monitors the signal intensity on BCCH of adjacent cells.
Adjacent cells with the minimum receiving intensity level higher than this
parameter are potential candidates for handover.
MS with receiving level larger than minimum receiving level indicates
that MS is at the edge of the serving cell.
Recommended value is usually approximated according to MS receiving
sensitivity. When network observes uneven traffic distribution in certain
cells, MIN access level increases the resulting C1 and C2 to decrease
the cell effective coverage range. However, the value of this parameter
cannot be too large. Otherwise, large value change can bring void area
across cell boundaries to result in sudden call drop problem. The value
of this parameter must not exceed -90 dBm for cell traffic balancing
conditions. Define the parameter value to 10 (that is, from -101 dBm ~
-100 dBm) at initial network rollout stage or lower, which is higher than
the receiving sensitivity of MS (that is, -102 dBm). However, the 2 dB
increase in parameter value is allowable in situations where network
Description
coverage is not a problem.
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
2-2085
SJ-20130408140048-016|2013-07-17(R1.0)
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
2-2086
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
15
Default Value

The value of this parameter must be higher than the minimum access

level of the corresponding adjacent cell, and the value should also be
higher or equal to the dowmlink level handover threshold, otherwise
frequent handover or reselection will happen.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.8 MIN threshold of signal level for handover on PBGT

Full Name
MIN threshold of signal level for handover on PBGT
Abbreviation
HoMarginPbgt
Managed Object
3GPP Name
None
3GPP Reference
N/A
2-2087
SJ-20130408140048-016|2013-07-17(R1.0)

PBGT value of an adjacent cell is also one of the causes for handover.
The decision process is as follows: If the PBGT value of an adjacent
cell is greater than the relevant threshold of this cell, handover shall be
performed to find a more suitable cell.
This parameter indicates the threshold used to determine PBGT
Description
handover from an adjacent cell to local cell.
Instance
Cell
0..100
Unit
dB
Default Value
30
Default Value
Target cell to be slightly higher

If the vaue is large, it is hard to hand over to the target cell.
If the value is smaller than 24 ( a minus value), handover can be triggered
even the signal level of the target cell is lower than that of the source cell.
In areas with frequent handover, the value should be improved
appropriately to reduce frequent handover.
In areas with blockings and shades, the value should be reduced
appropriately, to make handover occur as soon as possible, and to avoid
calldrop or poor quality because of fast fading.
The value can be set asymmetrically when the dual-band network shares

traffic or the traffic needs to be shared during single-band networking.

Such as, the value from high traffic cell A to the low traffic cell B is
configured small, and the value from the low traffic cell A to the high
traffic cell A is configured large, to balance the traffic between the cell A
and the cell B, and to reduce the cell A from congestion.
The value of CRO in the cell B corresponding to the cell A minus 24
should be greater than C2 of the cell B minus C2 of the cell A. Otherwise,
handover from the cell B to the cell A is triggered immediately after a call
is initiated at the cell B, which causes unshared traffic.
Unreasonable setting of the value has such impact on the handover,
calldrop, and road test coverage as ping-pong handover, and frequent
handover.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2088
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.9 MIN threshold of signal level for handover on power level

Full Name
MIN threshold of signal level for handover on power level
Abbreviation
HoMarginRxLev
Managed Object
3GPP Name
None
3GPP Reference
N/A
According to GSM specifications, handover decisions will be made after a
series of average values have been obtained. In handover caused by the
level, adjacent cells shall be screened and sequenced. The value should
be higher or equal to the threshold. This parameter defines the signal
Description
strength threshold to determine handover from adjacent cell to local cell.
Instance
Cell
0..100
Unit
dB
Default Value
27
Default Value
Change Mode

A handover based on signal strength is a kind of rescue handover. The
threshold should be set lower (lower than PBGT threshold) to ensure a
handover can be conducted in time.
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-2089
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.10 MIN threshold of signal level for handover on quality

Full Name
MIN threshold of signal level for handover on quality
Abbreviation
HoMarginRxQual
Managed Object
3GPP Name
None
3GPP Reference
N/A
According to GSM specifications,handover decisions will be made after a
series of average values have been obtained. In handover based on quality, adjacent cells shall be screened and sequenced. The value should be
higher or equal to the threshold. This parameter defines the signal quality
Description
threshold to determine handover from an adjacent cell to the local cell.
Instance
Cell
0..100
Unit
dB
Default Value
26
Default Value
Change Mode

A handover based on signal quality is a kind of rescue handover. The
threshold should be set lower (lower than the strength threshold) to
ensure a handover can be conducted in time.
Offline
Related features
Related Parameters
N/A
2-2090
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.11 Is related cell

Full Name
Is related cell
Abbreviation
IsRelatedCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Only the cell related to the serving cell can be a candidate in rapid fading
handover. This is a parameter of adjacent cell and is used to indicate
Description
whether adjacent cell is related to the serving cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
to "No" by default.
This switch is enabled if it is planned as
a candidate in rapid fading handover as needed.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
2-2091
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.12 Neighboring cell layer

Full Name
Neighboring cell layer
Abbreviation
NCellLayer
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter provides the handover policies in multilayer network
technology and dual-frequency network technology. Multilayer radio
coverage can be formed in the same physical area.
The PBGT handover defined in the specifications at one layer can reduce
the number of handovers during the call, thus improving the system
reliability and communication quality. The policy of handover between a
macro cell layer and a micro cell layer mainly depends on the moving
speed of MS. An MS at higher moving speed will try to stay at the macro
cell layer (upper layer of the micro cell layer), and an MS at lower moving
speed will try to enter the micro cell layer (lower layer of the macro cell
layer). Only in the case of PBGT handover and emergency, will the
undefined cell of the service area be considered as a candidate cell.
Same layer of the home cell: Adjacent cell and local cell are in the same
layer (PBGT handover possible); Upper layer of the home cell: Adjacent
cell is the upper layer of local cell (local cell is a micro cell); Lower layer
of the home cell: Adjacent cell is the lower layer of local cell (local cell
Description
is a macro cell).
Instance
Cell
2-2092
SJ-20130408140048-016|2013-07-17(R1.0)
0: Undefined
1: Same layer of the home cell
2: Upper layer of the home cell
3: Lower layer of the home cell
Unit
N/A
Default Value
Default Value
Generally, the network is a single layer network.

This layer, which belongs to the logic layer, has nothing to do with
the actual coverage and network frequency band. For example,
900M->900M can be set to the same layer, upper layer, or lower layer,
and 1800M->900M can also be set to the same layer, upper layer, or
lower layer.
Layer relationship brings an impact on the priority of target cell
selection and sequence (referring to Handover Algorithm Application
Guide). Usually, handover with layer relationship includes PBGT

handover, macro-micro handover, and traffic handover. Among which,
the macro-micro handover can be triggered only when adjacent cell
relationship (handover from upper layer to lower layer) is set.
As each Layer is able to share some traffic, it is suggested to flexibly
set layers for different adjacent cells to share traffic, so as to improve
congestion rate.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2093
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.13 Is handover forced neighbor cell

Full Name
Is handover forced neighbor cell
Abbreviation
IsHoForceNcell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of 1800M and 900M network sharing site, it is better to
handover subscribers of 900M network to 1800M network. At this time,
you can do directional handover traffic.
Forced handover is a method for on-site traffic adjustment. The forced
handover direction is definite, i.e. 1800M sector in the same direction.
To avoid influence on other cells, the forced handover is performed only
Description
for a specific object cell.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
normal setting
This parameter should be set for the target
cell in a handover including force traffic transfer.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2094
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.14 MAX level difference of force handover

Full Name
MAX level difference of force handover
Abbreviation
MaxForceHoDiff
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Force traffic transfer handover is performed only for one designated cell
and it is restricted by a tolerable level difference MaxLevDiff. This level
difference is lower than PBGT handover threshold in reverse direction,
Description
thus to avoid oscillating handover.
Instance
Cell
0..48
Unit
N/A
Default Value
Default Value
experience value
The lower the level difference. the more likely
the handover will happen. The parameter cannot be set too low,
otherwise
frequent ping-pong handovers will be caused.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2095
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.15 Handover force resource threshold

Full Name
Handover force resource threshold
Abbreviation
HoForceResThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Directed handover should not cause congestion in the destination cell.
When resource of object cell is lower than the congestion threshold,
forced handover can be implemented.
The resource threshold is calculated as follows:
100-current TCH load in a cell>= threshold for transferring reserved
resources current TCH load in a cell = number of busy TCHs (static
and idle)*100/(number of busy TCHs (static and idle) +number of
Description
idleTCHs(static and idle).
Instance
Cell
0..100
Unit
Default Value
40
Default Value
normal radio environment experience value
The threshold cannot be set too high to avoid
force transfer of overloaded traffic in a cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2096
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.16 Macro to micro handover Threshold

Full Name
Macro to micro handover Threshold
Abbreviation
MacroMicroHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the signal strength threshold for macro-micro
Description
handover.
Instance
Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
2-2097
SJ-20130408140048-016|2013-07-17(R1.0)
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
20
Default Value
experience value
In most cases, it will be easier to trigger
a macro-micro handover if the threshold is set higher.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2098
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.17 Macro to micro handover Value N

Full Name
Macro to micro handover Value N
Abbreviation
MacroMicroHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
During a process of macro to micro handover judgement, if N consecutive
times of measurement reports meet the conditions to conduct a macro to
Description
micro handover, the handover will be conducted.
Instance
Cell
1..255
Unit
N/A
Default Value
Default Value
experience value
If the level an adjacent cell is higher than the macro to micro handover
for consecutive Ntimes, a handover will be triggered.

If the parameter is set too high, handover will not be conducted in time
and overloaded traffic cannot be transferred;
If the parameter is set low, wrong or frequent handover will happen, thus
number of call drops will increase.
This parameter configures adjacent cells.
Change Mode
Offline
Related features
N/A
2-2099
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.18 Target cell traffic threshold

Full Name
Target cell traffic threshold
Abbreviation
TargetCellTrafficThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold for the target cell's traffic. The
system decides whether to perform handover to the cell according to
this parameter's value. If the traffic of the target cell is higher than the
threshold, handover is not made to the cell.
Description
This parameter is used for 2G handover and reselecting adjacent cells.
Instance
Cell
0..100
Unit
Default Value
75
Default Value
The resources should be obtained and at the
same time the congestion in target cell should be avoided.
If the parameter is set too high, congestion
will be likely to happen in the target cell.
Change Mode
Offline
Related features
2-2100
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.19 CS adjacent cell report priority

Full Name
CS adjacent cell report priority
Abbreviation
RepPrioCS
Managed Object
3GPP Name
REP_PRIORITY
3GPP Reference
3GPP TS 45.008
Priorities of the adjacent cell are as follows:
Adjacent cell with same frequency band. have the following features:
BSIC of color code is valid; Its measured field intensity ranks high among
cells in the same frequency band and is larger than or equal to the lower
limit specified by RprtThoCSXXX. Here, XXX represents frequency band
of serving cell.
Adjacent cell in the frequency band different from that of the serving
cell must have the following features: BSIC of color code is valid.
Its measured field intensity ranks high among cells in the same
frequency band and is larger than or equal to the lower limit specified
by RprtThoCSXXX. Here, XXX represents the frequency band different
from that of serving cell.
Other access technologies, such as UTRAN/FDD adjacent cells. These
cell shall have the following features: the cells scramble is correct. Its
measured field intensity ranks high among cells with the same access
technologies and is larger than or equal to the lower limit specified
by XXXRprtThoCS. Here, XXX represents access technologies like
Description
UTRAN/FDD.
2-2101
SJ-20130408140048-016|2013-07-17(R1.0)
For above priorities, if the prioritys location has surplus, then leave
it to adjacent cell of the next priority. For access technology such
as UTRAN/FDD, or frequency band such as GSM 900, the cell with
high RepPrioCS is preferred. For cells with same RepPrioCS, the
cell with greater sum of RprtThoCSXXX (or XXXRprtThoCS) and
RprtOffsetCSXXX (or XXXRprtOffsetCS) is preferred.
Instance
Cell
0: low
1: high
Unit
N/A
Default Value
Default Value
normal setting
No modification after configuration if there
is no special demands.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.20 PS adjacent cell report priority

Full Name
PS adjacent cell report priority
Abbreviation
RepPrioPS
Managed Object
3GPP Name
REP_PRIORITY
2-2102
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
3GPP TS 45.008
This parameter indicates the priority of measurements reports. It is
broadcast to the MS in SI2quater.
Priorities of the adjacent cell are as follows:
Adjacent cell with same frequency band. have the following features:
BSIC of color code is valid; Its measured field intensity ranks high among
cells in the same frequency band and is larger than or equal to the lower
limit specified by RprtThoCSXXX. Here, XXX represents frequency band
of serving cell.
Adjacent cell in the frequency band different from that of the serving
cell must have the following features: BSIC of color code is valid.
Its measured field intensity ranks high among cells in the same
frequency band and is larger than or equal to the lower limit specified
by RprtThoCSXXX. Here, XXX represents the frequency band different
from that of serving cell.
Other access technologies, such as UTRAN/FDD adjacent cells. These
cell shall have the following features: the cells scramble is correct. Its
measured field intensity ranks high among cells with the same access
technologies and is larger than or equal to the lower limit specified
by XXXRprtThoCS. Here, XXX represents access technologies like
UTRAN/FDD.
For above priorities, if the prioritys location has surplus, then leave
it to adjacent cell of the next priority. For access technology such
as UTRAN/FDD, or frequency band such as GSM 900, the cell with
high RepPrioCS is preferred. For cells with same RepPrioCS, the
cell with greater sum of RprtThoCSXXX (or XXXRprtThoCS) and
Description
RprtOffsetCSXXX (or XXXRprtOffsetCS) is preferred.
Instance
Cell
0: low
1: high
Unit
N/A
Default Value
Default Value
refer to CS parameter SearchPrioPS3G

For the last priority setting of the measurement
report from adjacent cells, if the cells with higher priorities are

expected to report, RepPrioPS for an adjacent cell should be set high.

Then the measurement results will be reported every time. In most
cases every adjacent cell is treated the same. Cells with low priorities
does not report frequently (when ReportRatePS is set to 1), RepPrioPS
is recommended to be set with the default value.
Change Mode
Offline
2-2103
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.21 The direction of neighbour cell for downlink rapid handover

Full Name
The direction of neighbour cell for downlink rapid handover
Abbreviation
NCellDir
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the direction of an adjacent cell to the current
Description
cell. Every adjacent cell can be configured with direction information.
Instance
Neighbor Cell
0: no direction
1: Direction A
2: Direction B
Unit
N/A
Default Value
Default Value
not High Railway scene set no direction
In high-speed railway environment, the direction
of an adjacent cell should be selected according to the network design.
Change Mode
Offline
Related features
N/A
2-2104
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.22 Minimum RX level(PS)

Full Name
Minimum RX level(PS)
Abbreviation
RxLevMin_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the minimum receiving strength level (on
PBCCH) required by MS to handover to this cell. It is one of the parameters to decide preferred cells during handover control. MS in a serving
cell constantly monitors the signal strength on PBCCH of adjacent cells.
Adjacent cells with the receiving intensity level higher than the minimum
value defined by this parameter are candidates for handover. When the
MS' minimum receiving strength required by the adjacent cell is greater
than that required by the local cell, it may cause handover and indicates
Description
that the MS is on the border of the cell.
Instance
Neighbor Cell
2-2105
SJ-20130408140048-016|2013-07-17(R1.0)
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
2-2106
SJ-20130408140048-016|2013-07-17(R1.0)
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
Unit
dBm
Default Value
15
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-2107
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.51.23 Margin of PBGT handover(PS)

Full Name
Margin of PBGT handover(PS)
Abbreviation
HoMarginPbgt_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
PS handover decision can be made at receiving a series of average values. The PBGT_PS value of an adjacent cell is also one of the causes
for PS handover. The decision process is as follows: If the PBGT_PS
value of an adjacent cell is higher than the relevant threshold of this cell,
PS handover should be performed to find a more suitable cell. This parameterr is the threshold that must be used in the PS handover decision
Description
to hand over from an adjacent cell to the local cell through PBGT.
Instance
Neighbor Cell
0..48
Unit
dB
Default Value
30
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2108
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.24 Margin of RX handover(PS)

Full Name
Margin of RX handover(PS)
Abbreviation
HoMarginRxLev_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
PS handover decision can be made at receiving a series of average values. In a handover caused by level changes, adjacent cells shall be
screened and sequenced. This parameter is the threshold that must be
used in the handover decision for a PS handover from the adjacent cell
Description
to the local cell through signal strength.
Instance
Neighbor Cell
0..48
Unit
dB
Default Value
30
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2109
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.25 Margin of quality handover(PS)

Full Name
Margin of quality handover(PS)
Abbreviation
HoMarginRxQual_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
PS handover decision can be made at receiving a series of average values. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description
cell through signal quality.
Instance
Neighbor Cell
0..48
Unit
dB
Default Value
30
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2110
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.26 Is related cell(PS)

Full Name
Is related cell(PS)
Abbreviation
IsRelatedCell_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Only the cell related to the serving cell can be a candidate in rapid fading
PS handover. This is a parameter of an adjacent cell and is used to indi-
Description
cate whether an adjacent cell is related to the serving cell.
Instance
Neighbor Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2111
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.27 Handover priority(PS)

Full Name
Handover priority(PS)
Abbreviation
HoPriority_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Cell priorities should be taken into consideration when candidate cells are
sequenced during PS handover. Therefore, there are three decisive factors to sequence candidate cells: priority, traffic, and radio communication
environment. Priority and traffic have the most impact on cell sequencing.
If they lead to the same result, sequence cells by radio conditions. The
Description
priority of a cell becomes higher with the increasing of this value.
Instance
Neighbor Cell
0..7
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2112
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.28 Max TX power of MS(PS)

Full Name
Max TX power of MS(PS)
Abbreviation
MsTxPwrMax_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum power allowed by an MS in an
Description
adjacent cell when on PBCCH.
Instance
Neighbor Cell
0..31
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2113
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.29 Traffic threshold of target cell(PS)

Full Name
Traffic threshold of target cell(PS)
Abbreviation
TargetTrafficThs_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold of the traffic in a target cell. The PS
handover arbitration is made on based on this value. If the traffic of this
target cell is higher than the threshold value, there will be no PS handover
Description
to this cell.
Instance
Neighbor Cell
0..100
Unit
Default Value
70
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2114
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.30 Threshold of macro to micro handover(PS)

Full Name
Threshold of macro to micro handover(PS)
Abbreviation
MacroMicroHoThs_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The handover from macro-cell to micro-cell is mainly applied to a twolayer network. That is, the slowly moving MS hands over from the macrocell layer to the micro-cell layer. It judges whether the condition allows
the MS moving slowly performs PS handover to a cell one-layer lower
than the current cell. The condition is the level of adjacent cell exceeds
the threshold for N times. This parameter is the threshold for cell signal
strength when PS handover occurs between the macro cell and the mico
Description
cell.
Instance
Neighbor Cell
0:<-110
1:-110~-109
2:-109~-108
3:-108~-107
4:-107~-106
5:-106~-105
6:-105~-104
7:-104~-103
8:-103~-102
9:-102~-101
10:-101~-100
11:-100~-99
12:-99~-98
13:-98~-97
14:-97~-96
15:-96~-95
16:-95~-94
17:-94~-93
18:-93~-92
19:-92~-91
2-2115
SJ-20130408140048-016|2013-07-17(R1.0)
20:-91~-90
21:-90~-89
22:-89~-88
23:-88~-87
24:-87~-86
25:-86~-85
26:-85~-84
27:-84~-83
28:-83~-82
29:-82~-81
30:-81~-80
31:-80~-79
32:-79~-78
33:-78~-77
34:-77~-76
35:-76~-75
36:-75~-74
37:-74~-73
38:-73~-72
39:-72~-71
40:-71~-70
41:-70~-69
42:-69~-68
43:-68~-67
44:-67~-66
45:-66~-65
46:-65~-64
47:-64~-63
48:-63~-62
49:-62~-61
50:-61~-60
51:-60~-59
52:-59~-58
53:-58~-57
54:-57~-56
55:-56~-55
56:-55~-54
57:-54~-53
58:-53~-52
59:-52~-51
60:-51~-50
61:-50~-49
62:-49~-48
63:>-48
2-2116
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
dBm
Default Value
20
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.31 Counter of macro to micro handover(PS)

Full Name
Counter of macro to micro handover(PS)
Abbreviation
MacroMicroHoN_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The handover from macro-cell to micro-cell is mainly applied to a two-layer
network. That is, the slowly moving MS hands over from the macro-cell
layer to the micro-cell layer. It judges whether the condition allows the
MS moving slowly performs PS handover to a cell one-layer lower than
the current cell. The condition is the level of adjacent cell exceeds the
threshold for N times. This parameter is to count the adjacent cell level
higher than the threshold when PS handover occurs between the macro
Description
cell and the mico cell.

2-2117
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Neighbor Cell
1..255
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.32 The number of C/I limited cell

Full Name
The number of C/I limited cell
Abbreviation
CILimitedNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the number of adjacent cells to which handover
from the serving cell is limited. If the number is 0, handover from the
Description
serving cell to this adjacent cell is not limited by other adjacent cells.
Instance
Cell
0..5
2-2118
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
The handover algorithm is used under the special
scenario, so the default value 0 is disabled.

Generally, it is recommended not to set C/I

limited cell for the adjacent cell.At such areas as the intersection
and crossing, the coverage cells are configured with C/I limited cell,
to prevent handover from being performed to these cells because the
signal is unstable.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.33 The objectID list of C/I limited cell

Full Name
The objectID list of C/I limited cell
Abbreviation
LimitedObjectId
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the objectID list of C/I limited cell.
Instance
Cell
0..255
Unit
N/A
2-2119
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
[0,0,0,0,0]
Default Value
The default value can be configured as required.
0 is the initial value, so it is taken as the default value.

According to actual condition on site, you

can configure the adjacent cell object ID of C/I limited cell in the
serving cell for one adjacent cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.34 The threshold list of C/I limited cell

Full Name
The threshold list of C/I limited cell
Abbreviation
CILimitedThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold list of C/I limited cell. When the C/I
value of the limited adjacent cell and serving cell of this adjacent cell is
greater than the limited threshold of the limited adjacent cell, this adjacent
Description
cell will be limited. That is, handover towards this adjacent cell is limited.
Instance
Cell
0..63
Unit
N/A
2-2120
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
[63,63,63,63,63]
The handover algorithm is the algorithm used
Default Value
in special condition, so the default value is set to a maximum value.
That is, the restriction does not take effect. It can be adjusted
to a smaller value according to the on-site conditions.
The higher the threshold is, the more difficult
it is for limited cell to restrict the adjacent cell, and the easier
handover is towards the adjacent cell.Generally, the purpose of setting
limited cell for an adjacent cell is to avoid handover towards the

adjacent cell. Therefore, it is suggested to set the threshold to
a relatively low value.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.35 Downlink rapid handover threshold

Full Name
Downlink rapid handover threshold
Abbreviation
DLRapidHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2121
SJ-20130408140048-016|2013-07-17(R1.0)
The downlink rapid handover is one of the causes for handover. The
decision process is as follows: do the handover if the latest downlink
level values (without average processing) is higher than the sum of
relevant threshold values and offset values. The handover reason is
Description
downlink rapid handover. DLRapidHoThs defines the threshold value.
Instance
GsmRelation
0..63
Unit
N/A
Default Value
30
Default Value
-80dbm can be considered as a sign for determining whether the level
is good or not.
A larger value indicates greater difficulty for performing handovers. A

smaller value indicates less difficulty for performing handovers. A too

large value may increase the possibility of call drops. A too small value
may cause handover failures and call drops. Adjust this parameter
based on the network coverage.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.36 Downlink rapid handover N

Full Name
Downlink rapid handover N
Abbreviation
DLRapidHoN
Managed Object

2-2122
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
The downlink rapid handover is one of the causes for handover. The
decision process is as follows: do the handover if the latest downlink
level values (without average processing) is higher than the sum of
relevant threshold values and offset values. The handover reason is
Description
downlink rapid handover. DLRapidHoN defines the value N.
Instance
GsmRelation
1..20
Unit
N/A
Default Value
Default Value
triggered.

A larger value leads to improved handover decision accuracy and worse

real-time performance. A smaller value leads to reduced handover
decision accuracy and better real-time performance.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.37 exclusive cell fro high speed

Full Name
exclusive cell fro high speed
Abbreviation
IsDLRapidHoNcell
2-2123
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter is one parameter for the adjacent cell, indicating whether
the adjacent cell is the high railway dedicated-network cell that can be the
Description
target cell for downlink rapid handover.
Instance
GsmRelation
0: No
1: Yes
Unit
N/A
Default Value
Default Value
A parameter related to features, so the default is no.
Set this parameter based on the network planning. For example, enable
this parameter the cell is planned in a high-speed scenario.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.38 CCN support

Full Name
CCN support
Abbreviation
CCNSUPPORT
Managed Object

2-2124
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
CCN_ACTIVE
3GPP Reference
3GPP TS 44.060
of SI13 on BCCH, the network side indicates the local cell whether to
enable CCN mode during the reselection to other GSM adjacent cell.
When the CCN_ACTIVE parameter is not carried in GPRS Cell Options
IE, or the CCN_ACTIVE parameter is disabled, the MS does not enter
the CCN mode. When the CCN_ACTIVE parameter is enabled, and the
cell is determined to be reselected to other GSM cells, users should
also check whether the CCN_SUPPORTED parameter exists in the
adjacent cell.
If it does not exist, the MS is supposed to use the CCN mode towards all
adjacent cells.
If it exists, set it as disabled, and the MS does not enter the CCN mode.
If it exists, set it as enabled, the MS enters the CCN mode.
Through the Packet Measurement Order message, the network
siide can also indicates the special MS that whether to enable the
CCN_ACTIVE parameter in the serving cell. In addition, through the
Packet Cell Change Order or PS Handover Command messgae, the
network side can also indicate the special MS that whether to enable
the CCN_ACTIVE parameter in the target cell. The setting of the
CCN_ACTIVE parameter carried in the message on PACCH take
spriority over that of the system message broadcast. The MS uses the
Description
CCN mode when it is nearly under NC0 and NC1 modes.
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value
This function is enabled by default because the CCN Active function for
adjacent cells is also enabled by default.

Normally proposed value is yes. If the serving cell's CCN active is

enabled, and the neighbour cell's CCN support is enabled, the CCN
mode is used when reselect to the neighbour cell; If the neighbour cell's
CCN support is not enabled, the CCN mode is not used when reselect to
the neighbour cell.
Change Mode
Offline
Related features
Related Parameters
NACCSupport
CCNActive
SIStatusInd
2-2125
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.39 Is the directed retry ncell

Full Name
Is the directed retry ncell
Abbreviation
DirectRetryCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The parameter is used to indicate whether the neighbor cell is the directed
Description
retry cell. It is one of the neighbor cell parameters.
Instance
Neighbor Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
This parameter is related to special functions, so the default value is
set as "Yes".
If the network planning requires the cell to
be a directed retry cell, set the parameter to "Yes".
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2126
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.51.40 PBGT handover margin of subcell2

Full Name
PBGT handover margin of subcell2
Abbreviation
HoMarginPbgtSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
PBGT value of an adjacent cell is also one of the causes for handover.
The decision process is as follows: If the PBGT value of an adjacent
cell is greater than the relevant threshold of this cell, handover shall be
performed to find a more suitable cell.
This parameter indicates the threshold used to determine PBGT
Description
handover from the second subcell of an adjacent cell to local cell.
Instance
Neighbor Cell
0..100
Unit
N/A
Default Value
40
According to the on-site experiences, when minimum PGBT handover
Default Value
threshold is set to 30, the service can be handed over to a neighbor cell
with better level and handover times are reasonable.
The second sub-cell is generally 10 dB weaker than the first sub-cell,
so the default value is 40.
2-2127
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter affects the difficulty of initiating PBGT handovers. A

lower value indicates that PBGT handovers are easier to be initiated.
If the parameter is set too low, pingpang handovers may occur. If the
parameter is set too high, handovers may not be performed in time.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.51.41 Rx level handover margin of subcell2

Full Name
Rx level handover margin of subcell2
Abbreviation
HoMarginRxLevSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
According to GSM specifications, handover decisions will be made after a
series of average values have been obtained. In handover caused by the
level, adjacent cells shall be screened and sequenced. The value should
be higher or equal to the threshold. This parameter defines the signal
Description
strength threshold to determine handover from adjacent cell to local cell.
Instance
Neighbor Cell
0..100
Unit
N/A
Default Value
40
2-2128
SJ-20130408140048-016|2013-07-17(R1.0)
The target handover cell generally has a higher level than the local
Default Value
cell. To avoid being handed over to a worse cell, the quality handover
threshold of the first sub-cell is 30 by default.
Strength handover is a relief handover. Set this parameter to a suitable
low value (lower than PBGT threshold) so that handovers based on
signal strength can be triggered in time.
If this parameter is set too low, pingpang or frequent handovers may be

caused. If this parameter is set too high, handover may be delayed and
as a result, the quality becomes worse or call drops may occur.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.51.42 Rx quality handover margin of subcell2

Full Name
Rx quality handover margin of subcell2
Abbreviation
HoMarginRxQualSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2129
SJ-20130408140048-016|2013-07-17(R1.0)
PS handover decision can be made at receiving a series of average values. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description
cell through signal quality.
Instance
Neighbor Cell
0..100
Unit
N/A
Default Value
40
The target handover cell generally has a higher level than the local
Default Value
cell. To avoid being handed over to a worse cell, the quality handover
threshold of the first sub-cell is 30 by default.
Quality handover is a relief handover. Set this parameter to a suitable
low value (lower than strength threshold) so that handovers based on

quality can be triggered in time. When the quality is bad, handover is

recommended.
If this parameter is set too low, pingpang or frequent handovers may be
caused. If this parameter is set too high, handover may be delayed and
as a result, the quality becomes worse or call drops may occur.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2-2130
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.43 Min Rx level of Neighbour Cell for subcell2

Full Name
Min Rx level of Neighbour Cell for subcell2
Abbreviation
RxLevMinSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the minimum receiving strength level (on
BCCH) for the MS handover to this cell when the user is working in
the second subcell. It is one of the parameters for determining the
preferential cell during the handover control. The MS in the cell always
monitors the signal strength on BCCH in the adjacent cell, but the cell
can be the candidate for handover until the adjacent cell whose receiving
level is greater than the minimum receiving strength. When the minimum
receiving strength of the MS required by the adjacent cell is greater
than that required by the local cell, handover may occur. In this case,
the MS is on the edge of this cell.
Generally, the value should be close to the receiving sensitivity of the
MS. For the cell with overloaded traffic, you can improve the minimum
access level of the cell, to reduce the C1 and C2 vlaues of the cell.
Consequently, the effective coverage scope is reduced. But the
minimum access level cannot be too large. Otherwise, a bind area
will occur to the boundary between two cells. The level is better to be
no more than -90 dB. During the initial operation of the network, the
value can be set to -101 dBm~-100 dBm or even lower, higher than the
receiving sensitivity -102 dBm of the MS. After the network is expanded
or radio coverage can take place in some areas, the value of some
Description
related cells can be increased by 2.
Instance
Neighbor Cell
0:< -110dBm
1:-110 ~ -109 dBm
2:-109 ~ -108 dBm
3:-108 ~ -107 dBm
4:-107 ~ -106 dBm
5:-106 ~ -105 dBm
6:-105 ~ -104 dBm
7:-104 ~ -103 dBm
8:-103 ~ -102 dBm
9:-102 ~ -101 dBm
10:-101 ~ -100 dBm
11:-100 ~ -99 dBm
12:-99 ~ -98 dBm
13:-98 ~ -97 dBm

2-2131
SJ-20130408140048-016|2013-07-17(R1.0)
14:-97 ~ -96 dBm

15:-96 ~ -95 dBm
16:-95 ~ -94 dBm
17:-94 ~ -93 dBm
18:-93 ~ -92 dBm
19:-92 ~ -91 dBm
20:-91 ~ -90 dBm
21:-90 ~ -89 dBm
22:-89 ~ -88 dBm
23:-88 ~ -87 dBm
24:-87 ~ -86 dBm
25:-86 ~ -85 dBm
26:-85 ~ -84 dBm
27:-84 ~ -83 dBm
28:-83 ~ -82 dBm
29:-82 ~ -81 dBm
30:-81 ~ -80 dBm
31:-80 ~ -79 dBm
32:-79 ~ -78 dBm
33:-78 ~ -77 dBm
34:-77 ~ -76 dBm
35:-76 ~ -75 dBm
36:-75 ~ -74 dBm
37:-74 ~ -73 dBm
38:-73 ~ -72 dBm
39:-72 ~ -71 dBm
40:-71 ~ -70 dBm
41:-70 ~ -69 dBm
42:-69 ~ -68 dBm
43:-68 ~ -67 dBm
44:-67 ~ -66 dBm
45:-66 ~ -65 dBm
46:-65 ~ -64 dBm
47:-64 ~ -63 dBm
48:-63 ~ -62 dBm
49:-62 ~ -61 dBm
50:-61 ~ -60 dBm
51:-60 ~ -59 dBm
52:-59 ~ -58 dBm
53:-58 ~ -57 dBm
54:-57 ~ -56 dBm
55:-56 ~ -55 dBm
56:-55 ~ -54 dBm
57:-54 ~ -53 dBm
2-2132
SJ-20130408140048-016|2013-07-17(R1.0)
58:-53 ~ -52 dBm

59:-52 ~ -51 dBm
60:-51 ~ -50 dBm
61:-50 ~ -49 dBm
62:-49 ~ -48dBm
63:> -48 dBm
Unit
N/A
Default Value
15
Default Value
general value
The parameter value should be greater than the minimum cell-level
access power of the corresponding neighbor cell, and be greater than
or equal to the download level handover threshold of the corresponding
neighbor cell. Otherwise, frequent handovers or reselections may occur.
In actual condition, properly increase the parameter value to reduce
the times of frequent handovers. To shorten the handover speed,

for example, in scenarios where the movement is fast, decrease the
parameter value. In a dual-frequency network, to prevent services being
handed over from 900M to 1800M when signal quality is low, increase
the parameter value of the 1800M neighbor cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2-2133
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.44 Target cell traffic threshold of Subcell2

Full Name
Target cell traffic threshold of Subcell2
Abbreviation
TargetTrafficThsSC2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the traffic threshold of the target cell when the
MS operates in the second subcell. It determines whether to perform
handover to this cell. If the traffic in the target cell is greater than this
threshold, do not perform handover to this cell. This parameter is used
Description
for 2G handover and reselecting the adjacent cell.
Instance
Neighbor Cell
0..100
Unit
Default Value
75
Default Value
The purpose is to get the resource as well as avoid target cell congestion.
If this parameter is set too high, the target cell may be congested. If this
parameter is set too low, the neighbor cell may get the channel and
cannot perform handover.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2-2134
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.45 Handover Priority Indication when serve cell shuttingdown

Full Name
Handover Priority Indication when serve cell shuttingdown
Abbreviation
PwDownHoPriInd
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates a handover priority of traffic neighbor cell when
Description
the serving cell is powered down.
Instance
Neighbor Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
The system automatically selects a target handover cell.

If the users need to customize a target handover cell, the value is set to 1.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2-2135
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.46 Is The Related Cell In dual- Frequency Network

Full Name
Is The Related Cell In dual- Frequency Network
Abbreviation
IsDualFreqRltCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the related cell is located in an en-
Description
hanced dual-frequency network.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Neighbor cells should not be set as the related cell in a dual-frequency
network.
If the neighbor cell has balanced traffic and the same coverage as the
local cell, it can be set as the related cell in a dual-frequency network.
Change Mode
Offline
Related features
Related Parameters
N/A
1.
A local cell is associated with only one cell in a dual-frequency network.
Relationship
2.The two cells are set as a neighbor cell of each other, and the local cell
is also set as the related cell of the other cell in a dual-frequency network.
3.The two cells must be located in one control main processor (CMP)
board.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
2-2136
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
New
2.51.47 Downlink rapid handover threshold for SDCCH

Full Name
Downlink rapid handover threshold for SDCCH
Abbreviation
SDDLRapidHoThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Sets the threshold for a downlink rapid SDCCH handover. A series of
measurement reports retermine whether a downlink rapid SDCCH han-
Description
dover is triggered.
Instance
Neighbor Cell
0:< -110dBm
1:-110 ~ -109 dBm
2:-109 ~ -108 dBm
3:-108 ~ -107 dBm
4:-107 ~ -106 dBm
5:-106 ~ -105 dBm
6:-105 ~ -104 dBm
7:-104 ~ -103 dBm
8:-103 ~ -102 dBm
9:-102 ~ -101 dBm
10:-101 ~ -100 dBm
11:-100 ~ -99 dBm
12:-99 ~ -98 dBm
13:-98 ~ -97 dBm
14:-97 ~ -96 dBm
15:-96 ~ -95 dBm
16:-95 ~ -94 dBm
17:-94 ~ -93 dBm
18:-93 ~ -92 dBm
19:-92 ~ -91 dBm
20:-91 ~ -90 dBm
21:-90 ~ -89 dBm
22:-89 ~ -88 dBm
23:-88 ~ -87 dBm
24:-87 ~ -86 dBm
25:-86 ~ -85 dBm
26:-85 ~ -84 dBm

2-2137
SJ-20130408140048-016|2013-07-17(R1.0)
27:-84 ~ -83 dBm

28:-83 ~ -82 dBm
29:-82 ~ -81 dBm
30:-81 ~ -80 dBm
31:-80 ~ -79 dBm
32:-79 ~ -78 dBm
33:-78 ~ -77 dBm
34:-77 ~ -76 dBm
35:-76 ~ -75 dBm
36:-75 ~ -74 dBm
37:-74 ~ -73 dBm
38:-73 ~ -72 dBm
39:-72 ~ -71 dBm
40:-71 ~ -70 dBm
41:-70 ~ -69 dBm
42:-69 ~ -68 dBm
43:-68 ~ -67 dBm
44:-67 ~ -66 dBm
45:-66 ~ -65 dBm
46:-65 ~ -64 dBm
47:-64 ~ -63 dBm
48:-63 ~ -62 dBm
49:-62 ~ -61 dBm
50:-61 ~ -60 dBm
51:-60 ~ -59 dBm
52:-59 ~ -58 dBm
53:-58 ~ -57 dBm
54:-57 ~ -56 dBm
55:-56 ~ -55 dBm
56:-55 ~ -54 dBm
57:-54 ~ -53 dBm
58:-53 ~ -52 dBm
59:-52 ~ -51 dBm
60:-51 ~ -50 dBm
61:-50 ~ -49 dBm
62:-49 ~ -48dBm
63:> -48 dBm
Unit
N/A
Default Value
10
Default Value
In terms of the configuration experience, the handover is performed in
time if the parameter value is set to 10.
When an MS is moving rapidly, a handover is triggered if the electricity
level of a neighbor cell reaches the threshold.
2-2138
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.51.48 Downlink rapid handover N for SDCCH

Full Name
Downlink rapid handover N for SDCCH
Abbreviation
SDDLRapidHoN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Sets the threshold for a downlink rapid SDCCH handover. A series of
measurement reports determine whether a downlink rapid SDCCH han-
Description
dover is triggered.
Instance
Neighbor Cell
1..20
Unit
N/A
Default Value
Default Value
The handover is performed in time if the parameter value is set to 2.
A rapid handover is performed when an MS is moving rapidly. A
handover decision is made in a shorter time if the N value is set lower.
Change Mode
Offline
Related features
2-2139
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
ShoEnable
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 B.
Parameter Modifying
Detail
New
2.51.49 Good level and bad quality handover NCell MARGIN

Full Name
Good level and bad quality handover NCell MARGIN
Abbreviation
GoodLevBadRQoffSet
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
During good level and bad quality handover, this parameter indicates how
much the downlink level of a neighbor cell drops from that of the serving
cell. The unit is dB. It describes the mapping relationship with the downlink
level of the serving cell. The downlink level range is (>= -60, -60 to -70, -70
Description
to -75, -75 to -85, < -85).
Instance
Neighbor Cell
0..63
Unit
N/A
Default Value
[20,15,10,5,0]
Default Value
The level offset is calculated according to the data of call drop due to
bad voice quality.

Change Mode
decrease the offset. After enabling this function, pay attention to the call
drop rate. If the call drop rate deteriorates, increase the offset.
Offline
2-2140
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.50 Forbid Period For non-Emergency Handover

Full Name
Forbid Period For non-Emergency Handover
Abbreviation
ForbidNonEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of non-emergency handover, the forbid period of handover to
the neighbor cell is counted from the time when the system measures the
cell for the first time. The unit is the period of generating a measurement
report. For preprocessing measurement reports, the unit is converted into
the period of generating an ordinary measurement report according to the
preprocessing period. In the forbid period, the neighbor cell is not selected
for non-emergency handover. When failing to measure the neighbor cell,
the system does not record it in the neighbor cell list. When measuring the
Description
neighbor cell again, the system validates the forbid period.
Instance
Neighbor Cell
0..65535
Unit
N/A
Default Value
Default Value
The default value is 0 (off).

2-2141
SJ-20130408140048-016|2013-07-17(R1.0)
This function is usually applied in the high-speed rail scenario. In

dedicated cells of high-speed rails, public cells are configured as their
neighbor cells. To avoid the forbid period set during a handover from MSs
in the dedicated network to the public network, the system forbids the
MSs to migrate to the neighbor cell through a non-emergency handover
within a certain period, which is used as a supplement to inaccurate speed

measurement. The forbid period can be set according to the time for the
MSs to pass through the cell. This function can also be applied in other
scenarios. When using this function, pay attention to the KPIs such as
handover success rate and call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.51 Forbid Period For Emergency Handover

Full Name
Forbid Period For Emergency Handover
Abbreviation
ForbidEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2142
SJ-20130408140048-016|2013-07-17(R1.0)
In the case of emergency handover, the forbid period of handover to the

neighbor cell is counted from the time when the system measures the cell for
the first time. The unit is the period of generating a measurement report. For
preprocessing measurement reports, the unit is converted into the period of
generating an ordinary measurement report according to the preprocessing
period. In the forbid period, the neighbor cell is not selected for emergency
handover. When failing to measure the neighbor cell, the system does not
record it in the neighbor cell list. When measuring the neighbor cell again,
Description
the system validates the forbid period.
Instance
Neighbor Cell
0..65535
Unit
N/A
Default Value
Default Value

neighbor cells. To avoid the forbid period set during a handover from
MSs in the dedicated network to the public network, the system forbids
the MSs to migrate to the neighbor cell through an emergency handover
within a certain period, which is used as a supplement to inaccurate speed

measurement. The forbid period can be set according to the time for the
MSs to pass through the cell. This function can also be applied in other
scenarios. When using this function, pay attention to the KPIs such as
handover success rate and call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-2143
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.51.52 Cell reselection priority

Full Name
Cell reselection priority
Abbreviation
CellChangePriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter describes the priority of the neighbor cell reselected. The
Description
higher the value, the higher the priority.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
When some cells are expected to be used for reselection, increase their
priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2144
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.53 Avoid Ping-Pang cell reselection Timer

Full Name
avoid Ping-Pang cell reselection Timer
Abbreviation
TPingPang
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Avoid NC2 ping-pang cell reselection timer
Instance
Cell
0..31
Unit
Default Value
15
Default Value
The value is set to 15s by the principle of 15s of previous cell reselection
minus hysteresis.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
target cell traffic threshold
Abbreviation
TargetCellTrafficThr
2-2145
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Maximum traffic load threshold of MSs reselected to the target cell
Instance
Cell
0..100
Unit
Default Value
70
Default Value
The load of a target cell should not be too high.
The smaller the value, the higher the requirement on the load of the target
cell. To select a cell with small load, decrease the value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.55 Penalty Period For non-Emergency Handover

Full Name
Penalty Period For non-Emergency Handover
Abbreviation
PenaltyNonEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2146
SJ-20130408140048-016|2013-07-17(R1.0)
In the case of non-emergency handover, the penalty period of handover to

the neighbor cell is counted from the time when the system measures the
cell for the first time. The unit is the period of generating a measurement
report. For preprocessing measurement reports, the unit is converted into
preprocessing period. In the penalty period, the neighbor cell is not selected for non-emergency handover. When sorting neighbor cells, the system takes the penalty level "PenaltyLevNonEmergHo" into consideration.
For the penalty level, a negative number refers to penalty and a positive
number refers to award. When failing to measure the neighbor cell, the
system does not record it in the neighbor cell list. When measuring the
Description
neighbor cell again, the system validates the penalty period.
Instance
Neighbor Cell
0..65535
Unit
N/A
Default Value
Default Value

neighbor cells. To avoid the penalty period set during a handover
from MSs in the dedicated network to the public network, the system
reduces the probability of MSs in migrating to the neighbor cell through
a non-emergency handover within a certain period, which is used as a

supplement to inaccurate speed measurement. The penalty period can be
set according to the time for the MSs to pass through the cell. This function
can also be applied in other scenarios. When using this function, pay
attention to the KPIs such as handover success rate and call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2147
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.56 Penalty Period For Emergency Handover

Full Name
Penalty Period For Emergency Handover
Abbreviation
PenaltyEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of emergency handover, the penalty period of handover to the
neighbor cell is counted from the time when the system measures the cell
for the first time. The unit is the period of generating a measurement report. For preprocessing measurement reports, the unit is converted into
preprocessing period. In the penalty period, the neighbor cell is not selected for emergency handover. When sorting neighbor cells, the system
takes the penalty level "PenaltyLevNonEmergHo" into consideration. For
the penalty level, a negative number refers to penalty and a positive number refers to award. When failing to measure the neighbor cell, the system
does not record it in the neighbor cell list. When measuring the neighbor
Description
cell again, the system validates the penalty period.
Instance
Neighbor Cell
0..65535
Unit
N/A
Default Value
Default Value

neighbor cells. To avoid the penalty period set during a handover from MSs
in the dedicated network to the public network, the system reduces the
probability of MSs in migrating to the neighbor cell through an emergency

handover within a certain period, which is used as a supplement to
inaccurate speed measurement. The penalty period can be set according
to the time for the MSs to pass through the cell. This function can also be
2-2148
SJ-20130408140048-016|2013-07-17(R1.0)
applied in other scenarios. When using this function, pay attention to the
KPIs such as handover success rate and call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.57 Penalty Level For non-Emergency Handover

Full Name
Penalty Level For non-Emergency Handover
Abbreviation
PenaltyLevNonEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of non-emergency handover, this parameter indicates the
penalty level during a penalty period. For the penalty level, a negative
number refers to penalty and a positive number refers to award.
Description
details, refer to PenaltyLevNonEmergHo.
Instance
Neighbor Cell
For
2-2149
SJ-20130408140048-016|2013-07-17(R1.0)
0:-48dB 1:-47dB 2:-46dB 3:-45dB 4:-44dB 5:-43dB 6:-42dB 7:-41dB

8:-40dB 9:-39dB 10:-38dB 11:-37dB 12:-36dB 13:-35dB 14:-34dB
15:-33dB 16:-32dB 17:-31dB 18:-30dB 19:-29dB 20:-28dB 21:-27dB
22:-26dB 23:-25dB 24:-24dB 25:-23dB 26:-22dB 27:-21dB 28:-20dB
29:-19dB 30:-18dB 31:-17dB 32:-16dB 33:-15dB 34:-14dB 35:-13dB
44:-4dB 45:-3dB 46:-2dB 47:-1dB 48:0dB 49:+1dB 50:+2dB 51:+3dB
52:+4dB 53:+5dB 54:+6dB 55:+7dB 56:+8dB 57:+9dB 58:+10dB 59:+11dB
60:+12dB 61:+13dB 62:+14dB 63:+15dB 64:+16dB 65:+17dB 66:+18dB
67:+19dB 68:+20dB 69:+21dB 70:+22dB 71:+23dB 72:+24dB 73:+25dB
74:+26dB 75:+27dB 76:+28dB 77:+29dB 78:+30dB 79:+31dB 80:+32dB
81:+33dB 82:+34dB 83:+35dB 84:+36dB 85:+37dB 86:+38dB 87:+39dB
88:+40dB 89:+41dB 90:+42dB 91:+43dB 92:+44dB 93:+45dB 94:+46dB
95:+47dB 96:+48dB
Unit
N/A
Default Value
48
Default Value
The default value is 48 (0 dB). The specific penalty level is determined
as required.

This parameter is usually set to a negative value. To make a penalty on

a neighbor cell, forbid MSs to migrate to the cell and meanwhile pay
attention to the call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2150
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.58 Penalty Level For Emergency Handover

Full Name
Penalty Level For Emergency Handover
Abbreviation
PenaltyLevEmergHo
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
In the case of emergency handover, this parameter indicates the penalty
level during a penalty period. For the penalty level, a negative number
refers to penalty and a positive number refers to award. For details, refer
Description
to PenaltyEmergHo.
Instance
Neighbor Cell
8:-40dB 9:-39dB 10:-38dB 11:-37dB 12:-36dB 13:-35dB 14:-34dB
15:-33dB 16:-32dB 17:-31dB 18:-30dB 19:-29dB 20:-28dB 21:-27dB
22:-26dB 23:-25dB 24:-24dB 25:-23dB 26:-22dB 27:-21dB 28:-20dB
29:-19dB 30:-18dB 31:-17dB 32:-16dB 33:-15dB 34:-14dB 35:-13dB
44:-4dB 45:-3dB 46:-2dB 47:-1dB 48:0dB 49:+1dB 50:+2dB 51:+3dB
52:+4dB 53:+5dB 54:+6dB 55:+7dB 56:+8dB 57:+9dB 58:+10dB 59:+11dB
60:+12dB 61:+13dB 62:+14dB 63:+15dB 64:+16dB 65:+17dB 66:+18dB
67:+19dB 68:+20dB 69:+21dB 70:+22dB 71:+23dB 72:+24dB 73:+25dB
74:+26dB 75:+27dB 76:+28dB 77:+29dB 78:+30dB 79:+31dB 80:+32dB
81:+33dB 82:+34dB 83:+35dB 84:+36dB 85:+37dB 86:+38dB 87:+39dB
88:+40dB 89:+41dB 90:+42dB 91:+43dB 92:+44dB 93:+45dB 94:+46dB
95:+47dB 96:+48dB
Unit
N/A
Default Value
48
Default Value
The default value is 48 (0 dB). The specific penalty level is determined
as required.

This parameter is usually set to a negative value. To make a penalty on

a neighbor cell, forbid MSs to migrate to the cell and meanwhile pay
attention to the call drop rate.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-2151
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.59 NC2 RxQual margin

Full Name
NC2 RxQual margin
Abbreviation
NC2MarginRxQual
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Minimum quality threshold of MSs selected to the neighbor cell according
Description
to quality criteria
Instance
Cell
0..48
Unit
N/A
Default Value
30
Default Value
The larger the value, the higher the quality of the selected target cell and
the better the user experience. However, it is difficult to find a qualified cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2152
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.60 NC2 RxLev margin

Full Name
NC2 RxLev margin
Abbreviation
NC2MarginRxLev
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Minimum level threshold of MSs selected to the neighbor cell according to
Description
level criteria
Instance
Cell
0..48
Unit
N/A
Default Value
30
Default Value
The larger the value, the higher the level of the selected target cell and the
better the user experience. However, it is difficult to find a qualified cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2153
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.61 NC2 Reselection hysteresis Threshold

Full Name
NC2 Reselection hysteresis Threshold
Abbreviation
NC2ResHys
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Hysteresis level when the downlink level of the target cell that can be
switched to this cell through reselection is higher than that of the serving
Description
cell
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-2154
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.51.62 NC2 reselection DL RxLevel Threshold

Full Name
NC2 reselection DL RxLevel Threshold
Abbreviation
NC2ResThr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Downlink level threshold of the target cell that can be switched to a better
cell through reselection. The threshold is higher than the level threshold
Description
that triggers cell reselection.
Instance
Cell
0..63
Unit
N/A
Default Value
35
Default Value
The threshold is higher than the downlink level threshold.

The smaller the value, the higher the probability of initiating PBGT
reselection, selecting a better neighbor cell for MSs and improving user
experience. However, the reselection times increase.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
2-2155
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.51.63 NC2 PBGT margin

Full Name
NC2 PBGT margin
Abbreviation
NC2MarginPBGT
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Minimum PBGT threshold of MSs selected to the neighbor cell according
Description
to PBGT criteria
Instance
Cell
0..48
Unit
N/A
Default Value
30
Default Value

The larger the value, the higher the PBGT value of the selected target
cell and the better the user experience. However, it is difficult to find
a qualified cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2156
SJ-20130408140048-016|2013-07-17(R1.0)
2.51.64 NC2 neighbour cell RXLEV_ACCESS_MIN

Full Name
NC2 neighbour cell RXLEV_ACCESS_MIN
Abbreviation
NC2RxLevMin
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Minimum receive level of MSs selected to the neighbor cell
Instance
Cell
0:< -110dBm 1:-110 ~ -109 dBm 2:-109 ~ -108 dBm 3:-108 ~ -107 dBm
4:-107 ~ -106 dBm 5:-106 ~ -105 dBm 6:-105 ~ -104 dBm 7:-104 ~ -103
dBm 8:-103 ~ -102 dBm 9:-102 ~ -101 dBm 10:-101 ~ -100 dBm 11:-100 ~
-99 dBm 12:-99 ~ -98 dBm 13:-98 ~ -97 dBm 14:-97 ~ -96 dBm 15:-96 ~
-95 dBm 16:-95 ~ -94 dBm 17:-94 ~ -93 dBm 18:-93 ~ -92 dBm 19:-92 ~
-91 dBm 20:-91 ~ -90 dBm 21:-90 ~ -89 dBm 22:-89 ~ -88 dBm 23:-88 ~
-87 dBm 24:-87 ~ -86 dBm 25:-86 ~ -85 dBm 26:-85 ~ -84 dBm 27:-84 ~
-83 dBm 28:-83 ~ -82 dBm 29:-82 ~ -81 dBm 30:-81 ~ -80 dBm 31:-80 ~
-79 dBm 32:-79 ~ -78 dBm 33:-78 ~ -77 dBm 34:-77 ~ -76 dBm 35:-76 ~
-75 dBm 36:-75 ~ -74 dBm 37:-74 ~ -73 dBm 38:-73 ~ -72 dBm 39:-72 ~
-71 dBm 40:-71 ~ -70 dBm 41:-70 ~ -69 dBm 42:-69 ~ -68 dBm 43:-68 ~
-67 dBm 44:-67 ~ -66 dBm 45:-66 ~ -65 dBm 46:-65 ~ -64 dBm 47:-64 ~
-63 dBm 48:-63 ~ -62 dBm 49:-62 ~ -61 dBm 50:-61 ~ -60 dBm 51:-60 ~
-59 dBm 52:-59 ~ -58 dBm 53:-58 ~ -57 dBm 54:-57 ~ -56 dBm 55:-56 ~
-55 dBm 56:-55 ~ -54 dBm 57:-54 ~ -53 dBm 58:-53 ~ -52 dBm 59:-52 ~ -51
Unit
N/A
Default Value
15
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2157
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.51.65 NC2 neighbour cell MS_TXPWR_MAX

Full Name
NC2 neighbour cell MS_TXPWR_MAX
Abbreviation
NC2MsTxPwrMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Maximum output power of MSs in the neighbor cell
Instance
Cell
0..31
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
2-2158
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.52 Interfere Gsm Cell Configuration

(GGsmIntfRelation)
2.52.1 Interfere Gsm Cell Configuration ID
Full Name
Interfere Gsm Cell Configuration ID
Abbreviation
GGsmIntfRelation
Managed Object
Interfere Gsm Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Interfere Gsm Cell Configuration ID
Instance
None
1..6
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->Adjacent Relation Configuration->Interfere Gsm Cell

Configuration
2-2159
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.52.2 GsmIntfRelation Sequence

Full Name
GsmIntfRelation Sequence
Abbreviation
GGsmIntfRelationSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the No. of the interference adjacent cell.
Instance
GsmRelation
1..6
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2160
SJ-20130408140048-016|2013-07-17(R1.0)
2.52.3 GGsmCell DN
Full Name
GGsmCell DN
Abbreviation
refGGsmCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quoted GSM source cell.
Instance
GsmRelation
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.52.4 GExternalGsmCell DN
Full Name
GExternalGsmCell DN
Abbreviation
refGExternalGsmCell
2-2161
SJ-20130408140048-016|2013-07-17(R1.0)
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quoted external GSM source cell.
Instance
GsmRelation
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.53 Visit Paging Cell (GGsmVpcRelation)

2.53.1 Visit Paging Cell ID
Full Name
Visit Paging Cell ID
Abbreviation
GGsmVpcRelation
Managed Object
Visit Paging Cell
2-2162
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Visit Paging Cell ID
Instance
None
1..128
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Adjacent Relation Configuration->Visit Paging Cell
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.53.2 VPC Id
Full Name
VPC Id
Abbreviation
GGsmVpcRelationSeq
Managed Object
Visit Paging Cell
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the VPC cell ID.
Instance
GsmRelation
2-2163
SJ-20130408140048-016|2013-07-17(R1.0)
2..128
Unit
N/A
Default Value
Default Value

Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.53.3 DN of GGsmCell
Full Name
DN of GGsmCell
Abbreviation
refGGsmCell
Managed Object
Visit Paging Cell
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quoted GSM source cell.
Instance
GsmRelation
None
Unit
N/A
Default Value
NA
2-2164
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54 Adjacent UTRAN Cell Configuration

(GUtranRelation)
2.54.1 UTRAN Relation type
Full Name
UTRAN Relation type
Abbreviation
RelationType
Managed Object
Adjacent UTRAN Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the UTRAN adjacent cell to which the handover
and reselection are performed, only reselction is performed, or only han-
Description
dover is performed.
Instance
External Utran Relation
2-2165
SJ-20130408140048-016|2013-07-17(R1.0)
0: Handover and reselect

1: Reselect
2: Handover
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->Adjacent Relation Configuration->Adjacent UTRAN Cell

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.2 Adjacent UTRAN Cell Configuration ID

Full Name
Adjacent UTRAN Cell Configuration ID
Abbreviation
GUtranRelation
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Adjacent UTRAN Cell Configuration ID
Instance
None
1..192
Unit
N/A
2-2166
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.3 DN of UTRAN FDD source cell

Full Name
DN of UTRAN FDD source cell
Abbreviation
refGExternalUtranCellFDD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quoted DN of UTRAN TDD source cell.
Instance
None
Unit
N/A
Default Value
NA
Default Value
2-2167
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.4 DN of UTRAN TDD source cell

Full Name
DN of UTRAN TDD source cell
Abbreviation
refGExternalUtranCellTDDLcr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the quoted DN of UTRAN TDD source cell.
Instance
None
Unit
N/A
Default Value
NA
Default Value
Change Mode
Offline
2-2168
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.5 UTRAN Relation Sequence

Full Name
UTRAN Relation Sequence
Abbreviation
GUtranRelationSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the UTRAN adjacent cell number.
Instance

{RelationType==0}[129..192]
Unit
N/A
Default Value
NA
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2169
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.6 RSCP offset handover to UTRAN adjacent cell

Full Name
RSCP offset handover to UTRAN adjacent cell
Abbreviation
HoRSCPOffset3G
Managed Object
3GPP Name
TDD_Qoffset FDD_Qoffset
3GPP Reference
3GPP TS 45.008
Handover from GSM to UTRAN being triggered only indicates that
UTRAN adjacent cell satisfies the minimum requirement for normal UE
communication within it.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
UE to handover to different adjacent cells.
When the adjacent cell is the cell to which the handover and reselection
Description
are performed, set this parameter.
Instance
Cell
0..63
Unit
N/A
Default Value
Default Value
radio environment of the border area of 2/3G.
2-2170
SJ-20130408140048-016|2013-07-17(R1.0)
If this parameter is set too low, it is easy to trigger a handover to a 3G

adjacent cell;
If this parameter is set too high, it is difficult to trigger a handover to

a 3G adjacent cell.
Change Mode
Offline
Related features
Related Parameters
FDDRepQntCS
Relationship
This parameter takes effect only when FDDRepQntCS is 0;
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.7 Ec/No offset handover to UTRAN adjacent cell

Full Name
Ec/No offset handover to UTRAN adjacent cell
Abbreviation
HoEcNoOffset3G
Managed Object
3GPP Name
FDD_Qmin_Offset
3GPP Reference
3GPP TS 45.008
Handover from GSM to UTRAN being triggered only indicates that
UTRAN adjacent cell satisfies the minimum requirement for normal UE
communication within it.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
UE to handover to different adjacent cells.
When the adjacent cell is the cell to which the handover and reselection
Description
are performed, set this parameter.
Instance
Cell
0..49
2-2171
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
radio environment of the border area of 2/3G.

If this parameter is set too low, it is easy to trigger a handover to a 3G

adjacent cell;
If this parameter is set too high, it is difficult to trigger a handover to
a 3G adjacent cell.
Change Mode
Offline
Related features
Related Parameters
FDDRepQntCS
Relationship
This parameter takes effect only when FDDRepQntCS

is 1;
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.8 CS adjacent cell report priority

Full Name
CS adjacent cell report priority
Abbreviation
RepPrioCS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2172
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the priority of measurement reports reported.

It is broadcast to the MS in SI2quater, PSI3ter, and PSI3quater. The
priorityt of adjacent cells reported is as follows:
1. Adjacent cells with the same frequency band. These cells must meet
the following requirements: a. The BSIC color code is valid. b. The
measured field strength ranks highly in cells with the same frequency
band, is equal to or greater than the lower limit of RprtThoPSXXX (XXX
indicates the frequency band of a serving cell).
2. Adjacent cells with different frequency bands . These cells must meet
indicates that the frequency band is different from that of the serving cell).
3. Other access technologies, such as adjacent cells of UTRAN/FDD.
These cells must meet the following requirements: a. The cell's scramble
code is correct. b. The measured field stength of cells with the same
access technology (such as UTRAN/FDD) ranks highly, is greater than
or equal to the lower limit of XXXRprtThoPS (XXX indicates the access
technology, such as WCDMA/FDD).
For the three priorities mentioned above, if there are remainling adjacent
cells in one priority, they will be transformed to adjacent cells in the next
priority. Cells with access technologies (such as UTRAN/FDD), with
high RepPrioCS, and a tfrequency bands (such as GSM900M) takes
priority). For cells with the same RepPrioCS, the large cell and the
cell of RprtThoCSXXX (or XXXRprtThoCS) and RprtOffsetCSXXX (or
Description
XXXRprtOffsetCS) take the priority.
Instance
Cell
0: low
1: high
Unit
N/A
Default Value
Default Value
normal setting
No modification after configuration if there
is no special demands.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2173
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.9 PS adjacent cell report priority

Full Name
PS adjacent cell report priority
Abbreviation
RepPrioPS
Managed Object
3GPP Name
REP_PRIORITY
3GPP Reference
3GPP TS 45.008
This parameter indicates the priority of measurement reports reported.
It is broadcast to the MS in SI2quater, PSI3ter, and PSI3quater. The
priorityt of adjacent cells reported is as follows:
1. Adjacent cells with the same frequency band. These cells must meet
indicates the frequency band of a serving cell).
2. Adjacent cells with different frequency bands . These cells must meet
indicates that the frequency band is different from that of the serving cell).
3. Other access technologies, such as adjacent cells of UTRAN/FDD.
These cells must meet the following requirements: a. The cell's scramble
code is correct. b. The measured field stength of cells with the same
access technology (such as UTRAN/FDD) ranks highly, is greater than
or equal to the lower limit of XXXRprtThoPS (XXX indicates the access
technology, such as WCDMA/FDD).
For the three priorities mentioned above, if there are remainling adjacent
cells in one priority, they will be transformed to adjacent cells in the
Description
next priority. The remaining cells, after each priority is reported, will
2-2174
SJ-20130408140048-016|2013-07-17(R1.0)
be transformed to other GSM cells and other access technology. The

remaing adjacent cells can also be reported even their signal strength
does not meet the threshold. Except for cells with high reporting priority
as indicated by the parameter RepPrioPS, these cells may be reported
less frequently (if ReportRate is 1), if indicated by the parameter
REPORTING_RATE, but at least once in four consecutive measurement
reports.
Instance
Cell
0: low
1: high
Unit
N/A
Default Value
Default Value
recommended in 3GPP, default value isnormal

For the last priority setting of the measurement
report from adjacent cells, if the cells with higher priorities are

expected to report, RepPrioPS for an adjacent cell should be set high.

Then the measurement results will be reported every time. In most
cases every adjacent cell is treated the same. Cells with low priorities
does not report frequently (when ReportRatePS is set to 1), RepPrioPS
is recommended to be set with the default value.
Change Mode
Offline
Related features
N/A
Related Parameters
ReportRatePS
The parameter RepPrioPS configures every adjacent
Relationship
cell; the parameter RepRatePS configures the current cell. The two
parameters determines the measurement report hand-in frequency in
the adjacent cell.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2175
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Target cell traffic threshold
Abbreviation
TargetCellTrafficThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indciates the threshold for the target cell traffic. It determines whether to perform handover to this cell. If the target cell traffic is
higher than this threshold, then the handover is not performed to this cell.
Description
This parameter is used for UTRAN handover and selecting adjacent cells.
Instance
Cell
0..100
Unit
Default Value
75
Default Value
The resources should be obtained and at the
same time the congestion in target cell should be avoided.
If the parameter is set too high, congestion
will be likely to happen in the target cell.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2176
SJ-20130408140048-016|2013-07-17(R1.0)
2.54.11 RSCP offset

Full Name
RSCP offset
Abbreviation
HoRSCPOffset3G_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the handover from GSM to UTRAN is triggered, it indicates that UE can
communicate properly in the neighbor cells of UTRAN. This parameter
is specified as the prerequisite for 2G/3G PS handover, to ensure that
the uplink and downlink of UTRAN neighbor cells can get enough field
strengh, and the priority of UE performing PS handover to different neigh-
Description
bor cells is controlled.
Instance
0..63
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2177
SJ-20130408140048-016|2013-07-17(R1.0)
2.54.12 EcNo offset

Full Name
EcNo offset
Abbreviation
HoEcNoOffset3G_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If the handover from GSM to UTRAN is triggered, it indicates that UE can
communicate properly in the neighbor cells of UTRAN. This parameter
is specified as the prerequisite for 2G/3G PS handover, to ensure that
the uplink and downlink of UTRAN neighbor cells can get enough field
strengh, and the priority of UE performing PS handover to different neigh-
Description
bor cells is controlled.
Instance
0..49
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2178
SJ-20130408140048-016|2013-07-17(R1.0)
2.54.13 Target cell traffic threshold(PS)

Full Name
Target cell traffic threshold(PS)
Abbreviation
TargetCellTraThs_PS
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the threshold for the traffic of the target 3G cell
during 2G/3G handover. It determines whether to perform PS handover
to this cell. If the traffic in the target cell is higher than this threshold, then
Description
the PS handover is not performed towards this cell.
Instance
0..100
Unit
Default Value
70
Default Value
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2179
SJ-20130408140048-016|2013-07-17(R1.0)
2.54.14 CCN support

Full Name
CCN support
Abbreviation
CCNSUPPORT
Managed Object
3GPP Name
CCN_ACTIVE
3GPP Reference
3GPP TS 44.060
of BCCHSI13, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM neighbor cell.
the CCN_ACTIVE parameter of the local cell is enabled, and the cell is
bound to be reselected to other GSM neighbor cell, user should also
check whether the CCN_SUPPORTED parameter of the neghbor cell
exists. If it does not exist, the MS is supposed to enable the CCN
mode towards all neighbor cells. If it exists, set the CCN mode as
enter the mode.
Description
Instance
Cell
0..1
Unit
N/A
Default Value
Default Value

Normally proposed value is yes.If the serving cell's CCN active is

mode is used when reselect to the neighbour cell;If the neighbour cell's
the neighbour cell.
Change Mode
Offline
2-2180
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.54.15 the priority of Utran Cell

Full Name
the priority of Utran Cell
Abbreviation
UtranCellPrio
Managed Object
3GPP Name
UTRAN_PRIORITY
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the priority of UTRAN neighbor cells.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
The value of this parameter is the same as
that of UtranDefaultPrio.
When the MS uses the reselection algorithm with high priority, the value
should be greater than that of ServCellPrio.
When the MS uses the reselection algorithm with low priority, the value
should be smaller than that of ServCellPrio.
2-2181
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
PrioReselSupportServCellPrioUtranDefaultPrio
When the PrioReselSupport switch is enabled,
Relationship
the value of UtranCellPrio cannot be the same as that of ServCellPrio,

and the default value equals to that of UtranDefaultPrio.
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.54.16 Is the directed retry ncell

Full Name
Is the directed retry ncell
Abbreviation
DirectRetryCell
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The parameter is used to indicate whether the neighbor cell is the directed
Description
retry cell. It is one of the neighbor cell parameters.
Instance

0: No
1: Yes
Unit
N/A
Default Value
Default Value
This parameter is related to special functions, so the default value is
set as "Yes".
If the network planning requires the cell to
be a directed retry cell, set the parameter to "Yes".
2-2182
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.55 Adjacent E-UTRAN Cell Configuration

(GEutranRelation)
2.55.1 Adjacent E-UTRAN Cell Configuration ID
Full Name
Adjacent E-UTRAN Cell Configuration ID
Abbreviation
GEutranRelation
Managed Object
Adjacent E-UTRAN Cell Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Adjacent E-UTRAN Cell Configuration ID
Instance
None
1..64
Unit
N/A
Default Value
N/A
Default Value
None

None
2-2183
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->Adjacent Relation Configuration->Adjacent E-UTRAN

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.2 DN of E-UTRAN FDD source cell

Full Name
DN of E-UTRAN FDD source cell
Abbreviation
refGExternalEutranCellFDD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
identified by ECID.
Instance
External EUtran Neighbor Cell
None
Unit
N/A
Default Value
NA
User can select an internal cell identified by siteid-btsid or an external cell
Default Value
None

None
Change Mode
Offline
Related features
N/A
2-2184
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.3 DN of E-UTRAN TDD source cell

Full Name
DN of E-UTRAN TDD source cell
Abbreviation
refGExternalEutranCellTDD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
User can select an internal cell identified by siteid-btsid or an external cell
Description
identified by ECID.
Instance
External EUtran Neighbor Cell
None
Unit
N/A
Default Value
NA
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2185
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.4 UTRAN Relation Sequence

Full Name
UTRAN Relation Sequence
Abbreviation
GEutranRelationSeq
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the No. of E-UTRAN neighbor cells.
Instance
1..64
Unit
N/A
Default Value
NA
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
2-2186
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.5 the PRIORITY of E-UTRAN cells for the specified EARFCN

Full Name
the PRIORITY of E-UTRAN cells for the specified EARFCN
Abbreviation
arfcnLtePrio
Managed Object
3GPP Name
E-UTRAN_PRIORITY
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the priority of E-UTRAN cells.
Instance
Cell
0..7 (0 for the lowest priority, 7 for the highest priority)
Unit
N/A
Default Value
Default Value
The default value is consistent with the value of EUtranDefaultPrio.

When an MS uses the reselection algorithm with a high priority, the value
should be greater than that of the parameter ServCellPrio.
When an MS uses the reselection algorithm with a low priority, the value
should be smaller than that of the parameter ServCellPrio.
Change Mode
Offline
Related features
N/A
Related Parameters
PrioReselSupport, ServCellPrio, EUtranDefaultPrio
Relationship
When PrioReselSupport is supported, EUtranCellPrio must not be equal

to ServCellPrio and the default value equals that of EUtranDefaultPrio.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2187
SJ-20130408140048-016|2013-07-17(R1.0)

OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.6 CCN support

Full Name
CCN support
Abbreviation
ccnSupport
Managed Object
3GPP Name
CCN_ACTIVE
3GPP Reference
3GPP TS 44.018
of BCCHSI13, the network side indicates whether to enable the CCN
mode when the local cell is reselected to other GSM neighbor cell.
the CCN_ACTIVE parameter of the local cell is enabled, and the cell is
bound to be reselected to other GSM neighbor cell, user should also
check whether the CCN_SUPPORTED parameter of the neghbor cell
exists. If it does not exist, the MS is supposed to enable the CCN
mode towards all neighbor cells. If it exists, set the CCN mode as
enter the mode.
Description
Instance
Cell
0..1
Unit
N/A
2-2188
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value

Normally proposed value is yes.If the serving cell's CCN active is

mode is used when reselect to the neighbour cell;If the neighbour cell's
the neighbour cell.
Change Mode
Offline
Related features
N/A
Related Parameters
NACCSupport
CCNActive
SIStatusInd
Relationship
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.7 The re-selecting forbid flag of LTE Ncell

Full Name
The re-selecting forbid flag of LTE Ncell
Abbreviation
ncelBlackListInd
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter indicates whether the MS can be reselected to the neigh-
Description
bor cell.
Instance
Cell
2-2189
SJ-20130408140048-016|2013-07-17(R1.0)
0: No
1: Yes
Unit
N/A
Default Value
Default Value
None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.8 the PRIORITY of E-UTRAN cells for FastReturn to LTE

Full Name
the PRIORITY of E-UTRAN cells for FastReturn to LTE
Abbreviation
ArfcnLTEPrioFR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the priority of the E-UTRAN cells selected by the
Description
BSC for fast returning to the LTE.
Instance
0..7 (0 for the lowest priority, 7 for the highest priority)
Unit
N/A
2-2190
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
Every adjacent cell is treated with the same priority.
Higher priorities are given to the adjacent E-UTRAN cells expected to
be selected first.
Change Mode
Offline
Related features
N/A
Related Parameters
R_PRIRESEL.ServCellPrio
ArfcnLTEPrioFR
The value of ArfcnLTEPrioFR cannot be equal to that of ServCellPrio,
Relationship
that is, the value of the ServCellPrio field in the R_PRIRESEL list. The
value of ArfcnLTEPrioFR for the same reselection frequency point within
the same cell (ArfcnLTE) should be equal.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.55.9 the PRIORITY of E-UTRAN cells

Full Name
the PRIORITY of E-UTRAN cells
Abbreviation
ArfcnLTEPrio_T
Managed Object
3GPP Name
E-UTRAN_PRIORITY
3GPP Reference
45.008
This parameter specifies the priority of adjacent E-UTRAN cells in transfer
Description
mode.
Instance
0..7
2-2191
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
Consistent with the value of the parameter EUtranDefaultPrio_T

When an MS uses the reselection algorithm with a high priority, the value

should be greater than that of the parameter ServCellPrio.

When an MS uses the reselection algorithm with a low priority, the value
should be smaller than that of the parameter ServCellPrio.
Change Mode
Offline
Related features
N/A
Related Parameters
PrioReselSupport, ServCellPrio, EUtranDefaultPrio_T
Relationship
When PrioReselSupport is supported, EUtranCellPrio must not be equal

to ServCellPrio and the default value equals that of EUtranDefaultPrio_T.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Cell Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.56 User and Service Resource Schedule

(GUserAndSrvBasedSche)
2.56.1 User and Service Based Resource Schedule ID
Full Name
User and Service Based Resource Schedule ID
Abbreviation
GUserAndSrvBasedSche
Managed Object
User and Service Resource Schedule
3GPP Name
N/A
3GPP Reference
N/A
2-2192
SJ-20130408140048-016|2013-07-17(R1.0)
Description
User and Service Based Resource Schedule ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Configuration->GPRS Configuration->User and Service Resource

Schedule
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.56.2 Support resource optimizing by service

Full Name
Support resource optimizing by service
Abbreviation
SuppResOpByService
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to support the resource optimization
Description
function based on user service types.
Instance
Cell
2-2193
SJ-20130408140048-016|2013-07-17(R1.0)
0: Not Support
1: Support
Unit
N/A
Default Value
Default Value

Enable this switch as required.
Change Mode
Offline
ZG0-01-02-007 Radio Resource Management Based on User Priority and
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Schedule
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.56.3 Threshold of PS resource congestion

Full Name
Threshold of PS resource congestion
Abbreviation
PSResourceThr1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
After the resource adjustment function based on user service type is enabled, and the occupancy of PS resources in the current cell exceeds this
threshold, the maximum number of downlink channels allocated of each
Description
service is limited.
2-2194
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
2..95
Unit
N/A
Default Value
35
Default Value
The maximum number of channels allocated is

controlled based on service type when the PS resource usage reaches
a certain percentage.
When this parameter is configured to a large
value, the system restricts the maximum number of channels allocated
based on service type when the PS resource usage is relatively high.
When this parameter is configured to a small value, the system restricts

the maximum number of channels allocated based on service type when
the PS resource usage is relatively low.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Schedule
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2.56.4 Threshold of relieving PS resource congestion

Full Name
Threshold of relieving PS resource congestion
Abbreviation
PSResourceThr2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2195
SJ-20130408140048-016|2013-07-17(R1.0)
After the resource adjustment function based on user service type is enabled, and the occupancy of PS resources in the current cell is lower than
this threshold, the maximum number of downlink channels allocated of
Description
each service is not limited.
Instance
Cell
1..90
Unit
N/A
Default Value
25
The maximum number of channels allocated is
Default Value
not controlled based on service type when the PS resource usage
reaches
a certain percentage.
When this parameter is configured to a large
value, the system does not restrict the maximum number of channels

allocated based on service type when the PS resource usage is relatively

high. When this parameter is configured to a small value, the system
does not restrict the maximum number of channels allocated based on
service type when the PS resource usage is relatively low.
Change Mode
Offline
Related features
Service Type
Related Parameters
PSResourceThr0
Relationship
The value of PSResourceThr1 should be smaller

than the value of PSResourceThr0.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Schedule
Parameter Modifying
Version
iBSCV6.20.710a
Parameter Modifying
Detail
New
2-2196
SJ-20130408140048-016|2013-07-17(R1.0)
2.57 User Priority and Service Type Configuration

(GPsUserAndSrvType)
2.57.1 User Priority and Service Type Configuration ID
Full Name
User Priority and Service Type Configuration ID
Abbreviation
GPsUserAndSrvType
Managed Object
User Priority and Service Type Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
User Priority and Service Type Configuration ID
Instance
None
1..12
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Schedule->User Priority and Service Type Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2197
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.2 User Type

Full Name
User Type
Abbreviation
userType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the following three types of users performing
Description
services: gold medal, silver medal, and copper medal.
Instance
Cell
0: gold user
1: silver user
2: bronze user
Unit
N/A
Default Value
Default Value
The value is fixed and needs no modification.

The parameter value is fixed and needs to modification.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No

OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2198
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.3 Service Type

Full Name
Service Type
Abbreviation
ServType
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the following four types of services implemented::self-owned services , browsed services, downloaded services,
Description
and special services.
Instance
Cell
0: own service
1: browse service
2: download service
3: IM service
Unit
N/A
Default Value
Default Value
The type is fixed and no modification is required.

The parameter value is fixed and needs to modification.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2199
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.4 Schedule Priority

Full Name
Schedule Priority
Abbreviation
SchedulePriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the scheduling priority of different services. It
Description
determins the scheduling duration of services.
Instance
Cell
1..10
Unit
N/A
Default Value
Default Value
It is a recommended value for three user types and four service types.
Adjust this parameter only when specially required. A smaller value
indicates a longer duration for scheduling the services corresponding
to the user priority. A larger value indicates a shorter duration for

scheduling the services corresponding to the user priority.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No

OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2200
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.5 Downlink delay time

Full Name
Downlink delay time
Abbreviation
DlDelayTimeOfService
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the downlink delay time of different services.
Instance
Cell
50..4000
Unit
N/A
Default Value
2000
Default Value

indicates a longer duration for keeping the services corresponding to the

user priority after downlink TBF data is transmitted completely. A larger
value indicates a shorter duration for keeping the services corresponding
to the user priority after downlink TBF data is transmitted completely.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No

OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2201
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.6 TBF occupancy

Full Name
TBF occupancy
Abbreviation
TBFNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the TBF occupancy of different services.
Instance
Cell
1: 0.5 TBF occupancy
2: 1 TBF occupancy
4: 2 TBF occupancy
Unit
N/A
Default Value
Default Value

indicates that more service types are allowed for the user on the channel.
A larger value indicates that less service types are allowed for the user
on the channel.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 E.
Parameter Modifying
Detail
Update
2-2202
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.7 Max PDTCH num

Full Name
Max PDTCH num
Abbreviation
MaxPdtchNum
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the maximum allowable number of channels al-
Description
located during the congestion of different services.
Instance
Cell
1..5
Unit
N/A
Default Value
Default Value
Set it to the recommended configuration value for three user types and
four service types.


indicates that less channels can be assigned when user services of

the specified type are congested. A larger value indicates that more
channels can be assigned when user services of the specified type are
congested.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2203
SJ-20130408140048-016|2013-07-17(R1.0)
2.57.8 Preempt priority

Full Name
Preempt priority
Abbreviation
PreemptPriority
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates the preemption accessed when different ser-
Description
vices are congestioned.
Instance
Cell
0..11
Unit
N/A
Default Value
11
Default Value
indicates a lower preemption priority for the specified user service type.
A larger value indicates a higher preemption priority for the specified

user service type.
Change Mode
Offline
Related features
Service Type
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No

OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2204
SJ-20130408140048-016|2013-07-17(R1.0)
2.58 Cell Reserved Configuration (GCellRsv)

2.58.1 Cell Reserved Configuration ID
Full Name
Cell Reserved Configuration ID
Abbreviation
GCellRsv
Managed Object
Cell Reserved Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Cell Reserved Configuration ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Cell Reserved Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.58.2 Cell Reserved Parameter 1

Full Name
Cell Reserved Parameter 1

2-2205
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
reserved1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
This parameter indicates the cell reserved parameter 1.
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2206
SJ-20130408140048-016|2013-07-17(R1.0)
Description
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..255
Unit
N/A
2-2207
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
None
2-2208
SJ-20130408140048-016|2013-07-17(R1.0)

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
0..255
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
2-2209
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-2210
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved7
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2211
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved8
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2212
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
reserved9
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved10
Managed Object

2-2213
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved11
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2-2214
SJ-20130408140048-016|2013-07-17(R1.0)
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved12
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
2-2215
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved13
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
2-2216
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved14
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2217
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved15
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2218
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved16
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2219
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved17
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2220
SJ-20130408140048-016|2013-07-17(R1.0)

Full Name
Abbreviation
reserved18
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved19
Managed Object

2-2221
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
reserved20
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
2-2222
SJ-20130408140048-016|2013-07-17(R1.0)
None
Unit
N/A
Default Value
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59 Priority-based Resel Configuration

(GPriorityResel)
2.59.1 Priority-based Resel Configuration ID
Full Name
Priority-based Resel Configuration ID
Abbreviation
GPriorityResel
Managed Object
Priority-based Resel Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
Priority-based Resel Configuration ID
Instance
None
2-2223
SJ-20130408140048-016|2013-07-17(R1.0)
0..1
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Priority-based Resel Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.2 Cell re-selection Switch Based on priority

Full Name
Cell re-selection Switch Based on priority
Abbreviation
PrioReselSupport
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
This parameter indicates that whether the cell reselection function based
Description
on priority is enabled.
Instance
Cell
1: Support
Unit
N/A
0: Not Support
2-2224
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Default Value
When reselecting an adjacent LTE cell, enable
this switch. In other cases, disable this switch.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
When LTE adjacent cells are available, PrioReselSupport must be
Relationship
enabled. When PrioReselSupport is enabled, LTE adjacent cells or 3G

adjacent cells must be available.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.3 Priority of GSM cells

Full Name
Priority of GSM cells
Abbreviation
ServCellPrio
Managed Object
3GPP Name
GERAN_PRIORITY
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the priority of GSM cells.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
2-2225
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
UtranDefaultPrio,EUtranDefaultPrio
Relationship
The value of ServCellPrio should not be consistent with that of

UtranDefaultPrio and EUtranDefaultPrio.
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.4 threshold of serving cell that used by priority Cell

re-selection algorithm
Full Name
threshold of serving cell that used by priority Cell re-selection algorithm
Abbreviation
THRESHPRIORYSEARCH
Managed Object
3GPP Name
THRESH_Priority_Search
3GPP Reference
3GPP TS 44.018
This parameter indicates the application threshold based on priority res-
Description
election algorithm.
Instance
Cell
2-2226
SJ-20130408140048-016|2013-07-17(R1.0)
0: -98
1: -95
2: -92
3: -89
4: -86
5: -83
6: -80
7: -77
8: -74
9: -71
10: -68
11: -65
12: -62
13: -59
14: -56
15: always
Unit
dBm
Default Value
15
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2227
SJ-20130408140048-016|2013-07-17(R1.0)
2.59.5 threshold that Allow MS re-select to lower priority Cell

Full Name
threshold that Allow MS re-select to lower priority Cell
Abbreviation
THRESHGSMLOW
Managed Object
3GPP Name
THRESH_GSM_low
3GPP Reference
3GPP TS 44.018
This parameter indicates the threshold that allows the MS to reselect to
Description
the cell with low priority.
Instance
Cell
0: 0 dB
1: 2 dB
2: 4 dB
3: 6 dB
4: 8 dB
5: 10 dB
6: 12 dB
7: 14 dB
8: 16 dB
9: 18 dB
10: 20 dB
11: 22 dB
12: 24 dB
13: 26 dB
14: 28 dB
15: always
Unit
N/A
Default Value
15
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
0
2-2228
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.6 Hysteresis of priority reselection algorithm

Full Name
Hysteresis of priority reselection algorithm
Abbreviation
HysteresisofPRiority
Managed Object
3GPP Name
H_PRIO
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the hysteresis of priority reselection algorithm.
Instance
Cell
0: rule disabled
1: 5dB
2: 4dB
3: 3dB
Unit
N/A
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2229
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.7 Time hysteresis of priority reselection algorithm

Full Name
Time hysteresis of priority reselection algorithm
Abbreviation
TimeHysteresisofReS
Managed Object
3GPP Name
T_Reselection
3GPP Reference
3GPP TS 44.018
This parameter indicates the time hysteresis of priority reselection algo-
Description
rithm.
Instance
Cell
0: 5
1: 10
2: 15
3: 20
Unit
Default Value
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2230
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.8 the default priority of Utran Cells

Full Name
the default priority of Utran Cells
Abbreviation
UtranDefaultPrio
Managed Object
3GPP Name
DEFAULT_UTRAN_PRIORITY
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the default priority of EUtran cells.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
Currently, this parameter is being developed
and thus requires no adjustment.
Change Mode
Offline
Related features
N/A
Related Parameters
ServCellPrio
Relationship
The value of EUtranDefaultPrio should not be consistent with that of

ServCellPrio.
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2231
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.59.9 the maximum thresholds of Utran reselection

Full Name
the maximum thresholds of Utran reselection
Abbreviation
UtranHighThresh
Managed Object
3GPP Name
THRESH_UTRAN_high
3GPP Reference
3GPP TS 44.018
This parameter indicates the maximum signal-difference threshold that
supports the terminal based on priority-reselection algorithm to reselect
Description
to UTRAN neighbor cells.
Instance
Cell
0..31
Unit
N/A
Default Value
[26,24,22,20,18,16,14,12]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2232
SJ-20130408140048-016|2013-07-17(R1.0)
2.59.10 the minimum thresholds of Utran reselection

Full Name
the minimum thresholds of Utran reselection
Abbreviation
UtranLowThresh
Managed Object
3GPP Name
THRESH_UTRAN_low
3GPP Reference
3GPP TS 44.018
This parameter indicates the minimum signal-difference threshold that
supports the terminal based on priority-reselection algorithm to reselect
Description
to UTRAN neighbor cells.
Instance
Cell
0..31
Unit
N/A
Default Value
[26,24,22,20,18,16,14,12]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.11 Minimum RX level for Utran cells

Full Name
Minimum RX level for Utran cells
2-2233
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
UtranQRXLEVMIN
Managed Object
3GPP Name
UTRAN_QRXLEVMIN
3GPP Reference
3GPP TS 44.018
This parameter indicates the minimum signal threshold that supports the
terminal based on priority-reselection algorithm to reselect to UTRAN
Description
neighbor cells.
Instance
Cell
0..31
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.12 the default priority of EUtran Cells

Full Name
the default priority of EUtran Cells
Abbreviation
EUtranDefaultPrio
Managed Object
2-2234
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Name
N/A
3GPP Reference
3GPP TS 44.018
Description
This parameter indicates the default priority of EUtran cells.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value
None
Currently, this parameter is being developed
and thus requires no adjustment.
Change Mode
Offline
Related features
N/A
Related Parameters
ServCellPrio
Relationship
The value of EUtranDefaultPrio should not be consistent with that of

ServCellPrio.
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.13 the maximum thresholds of EUtran reselection

Full Name
the maximum thresholds of EUtran reselection
Abbreviation
EUtranHighThresh
Managed Object
3GPP Name
THRESH_E-UTRAN_high
3GPP Reference
3GPP TS 44.018
2-2235
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter indicates the maximum signal-difference threshold for the

Description
MS to reselect to EUTRAN neighbor cells.
Instance
Cell
0..310 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 = 62
dB
Unit
N/A
Default Value
[26,24,22,20,18,16,14,12]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.14 the minimum thresholds of EUtran reselection

Full Name
the minimum thresholds of EUtran reselection
Abbreviation
EUtranLowThresh
Managed Object
3GPP Name
THRESH_E-UTRAN_low
3GPP Reference
3GPP TS 44.018
This parameter indicates the minimum signal-difference threshold for the
Description
MS to reselect to EUTRAN neighbor cells.
Instance
Cell
2-2236
SJ-20130408140048-016|2013-07-17(R1.0)
0..310 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 = 62

dB
Unit
N/A
Default Value
[26,24,22,20,18,16,14,12]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.15 Minimum RX level for EUtran cells

Full Name
Minimum RX level for EUtran cells
Abbreviation
EUtranQRXLEVMIN
Managed Object
3GPP Name
E-UTRAN_QRXLEVMIN
3GPP Reference
3GPP TS 44.018
This parameter indicates the minimum signal threshold for the MS to re-
Description
select to EUTRAN neighbor cells.
Instance
Cell
0..310 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm, 31
= -78 dBm
Unit
N/A
2-2237
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
[0,0,0,0,0,0,0,0]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
Um interface
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.16 High RSRQ thresholds for EUtran reselection

Full Name
High RSRQ thresholds for EUtran reselection
Abbreviation
EUtranHighThreshQ
Managed Object
3GPP Name
E-UTRAN_QQUALMIN
3GPP Reference
3GPP TS 44.018
Description
lect to EUTRAN neighbor cells.
Instance
Cell
This parameter indicates the highest RSRQ threshold for the MS to rese-
0..310 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 = 31

dB
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value

2-2238
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.59.17 Low RSRQ thresholds for EUtran reselection

Full Name
Low RSRQ thresholds for EUtran reselection
Abbreviation
EUtranLowThreshQ
Managed Object
3GPP Name
THRESH_E-UTRAN_high_Q
3GPP Reference
3GPP TS 44.018
This parameter indicates the lowest RSRQ threshold for the MS to rese-
Description
lect to EUTRAN neighbor cells.
Instance
Cell
0..310 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 = 31
dB
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value
Change Mode
Offline
2-2239
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.59.18 Minimum RSRQ for EUtran cells

Full Name
Minimum RSRQ for EUtran cells
Abbreviation
EUtranQQUALMIN
Managed Object
3GPP Name
THRESH_E-UTRAN_low_Q
3GPP Reference
3GPP TS 44.018
This parameter indicates the minimum RSRQ for reselecting to EUTRAN
Description
neighbor cells.
Instance
Cell
0: -34 dB
1: -32 dB
2: -30 dB
3: -28 dB
4: -26 dB
5: -24 dB
6: -22 dB
7: -20 dB
8: -18 dB
9: -16 dB
10: -14 dB
11: -12 dB
12: -10 dB
13: -8 dB
2-2240
SJ-20130408140048-016|2013-07-17(R1.0)
14: -6 dB
15: -4 dB
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.59.19 Minimum RSRQ for EUtran cells based on RSRP

Full Name
Minimum RSRQ for EUtran cells based on RSRP
Abbreviation
EUtranQMIN
Managed Object
3GPP Name
3GPP Reference
3GPP TS 44.018
This parameter indicates a minimum RSRQ threshold of an MS reselected
Description
to the EUTRAN neighbor cell.
Instance
Cell
2-2241
SJ-20130408140048-016|2013-07-17(R1.0)
0: -34 dB
1: -32 dB
2: -30 dB
3: -28 dB
4: -26 dB
5: -24 dB
6: -22 dB
7: -20 dB
8: -18 dB
9: -16 dB
10: -14 dB
11: -12 dB
12: -10 dB
13: -8 dB
14: -6 dB
15: -4 dB
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
Recommended value in the protocol

The parameter is set in accordance with an actual network requirement.
Change Mode
Offline
Related features
N/A
Related Parameters
EnhancedResParaInd
Relationship
The parameter is delivered when EnhancedResParaInd is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2-2242
SJ-20130408140048-016|2013-07-17(R1.0)
2.59.20 Minimum RSRP RX level for EUtran cells

Full Name
Minimum RSRP RX level for EUtran cells
Abbreviation
EutranRSRPMIN
Managed Object
3GPP Name
3GPP Reference
3GPP TS 44.018
This parameter indicates a minimum signal threshold of an MS reselected
Description
to the EUTRAN neighbor cell.
Instance
Cell
0:-140 dB
1:-138 dB
2:-136 dB
3:-134 dB
4:-132 dB
5:-130 dB
6:-128 dB
7:-126 dB
8:-124 dB
9:-122 dB
10:-120 dB
11:-118 dB
12:-116 dB
13:-114 dB
14:-112 dB
15:-110 dB
16:-108 dB
17:-106 dB
18:-104 dB
19:-102 dB
20:-100 dB
21:-98 dB
22:-96 dB
23:-94 dB
24:-92 dB
25:-90 dB
26:-88 dB
27:-86 dB
28:-84 dB
29:-82 dB
30:-80 dB
31:-78 dB
2-2243
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
Recommended value in the protocol

Change Mode
Offline
Related features
N/A
Related Parameters
EnhancedResParaInd
Relationship
The parameter is delivered when EnhancedResParaInd is enabled.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.59.21 Enhanced Cell Reselection Parameters Indication

Full Name
Enhanced Cell Reselection Parameters Indication
Abbreviation
EnhancedResParaInd
Managed Object
3GPP Name
3GPP Reference
3GPP TS 44.018
This parameter determines whether the enhanced EUTRAN reselection
Description
parameter is delivered.
Instance
Cell
0: No
1: Yes
Unit
N/A
Default Value
2-2244
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
The parameter will be supplemented in R9 protocol. The function is
disabled by default.

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path
Parameter Modifying
Version
UR11.2 A.
Parameter Modifying
Detail
New
2.59.22 the default priority of EUtran Cell in packet transfer mode

Full Name
the default priority of EUtran Cell in packet transfer mode
Abbreviation
EUtranDefaultPrio_T
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the default priority of an E-UTRAN cell in packet
Description
transfer mode.
Instance
Cell
0..7
Unit
N/A
Default Value
Default Value


2-2245
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
ServCellPrio
Relationship
The value of this parameter must be different from that of the parameter
ServCellPrio.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.23 the maximum thresholds of EUtran reselection in packet

transfer mode
Full Name
the maximum thresholds of EUtran reselection in packet transfer mode
Abbreviation
EUtranHighThresh_T
Managed Object
3GPP Name
THRESH_E-UTRAN_high
3GPP Reference
45.008
This parameter specifies the maximum signal-difference threshold for an
Description
MS to be reselected to an adjacent E-UTRAN cell in packet transfer mode.
Instance
Cell
0..31 (0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 = 62 dB)
Unit
2dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value

Change Mode
Offline
2-2246
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.24 High RSRQ thresholds for EUtran reselection in packet

transfer mode
Full Name
High RSRQ thresholds for EUtran reselection in packet transfer mode
Abbreviation
EUtranHighThreshQ_T
Managed Object
3GPP Name
THRESH_E-UTRAN_high_Q
3GPP Reference
45.008
This parameter specifies the maximum RSRQ threshold for an MS to be
Description
reselected to an adjacent E-UTRAN cell in packet transfer mode.
Instance
Cell
0..31 (0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 = 31 dB.)
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2247
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.25 the minimum thresholds of EUtran reselection in packet

transfer mode
Full Name
the minimum thresholds of EUtran reselection in packet transfer mode
Abbreviation
EUtranLowThresh_T
Managed Object
3GPP Name
THRESH_E-UTRAN_low
3GPP Reference
45.008
This parameter specifies the minimum signal-difference threshold for an MS
Description
to be reselected to an adjacent E-UTRAN cell in packet transfer mode.
Instance
Cell
0..31 (0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 = 62 dB.)
Unit
2dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2248
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.26 the minimum thresholds for FastReturn to LTE

Full Name
the minimum thresholds for FastReturn to LTE
Abbreviation
EUtranLowThreshFR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold of the difference between the downlink receive level and the minimum receive level (EUtranQRXLEVMINFR)
when the BSC selects adjacent E-UTRAN target cells for fast returning
to the LTE. To select such adjacent E-UTRAN target cells based on the
RSRP reported by an MS, the BSC searches the cells fulfilling the conditions that the difference between the RSRP and the EUtranQRXLEVMINFR
value is greater than the EUTRANLowThreshFR value of the cell's priority in the descending order of cell priorities. For the cells with the same
priority, it chooses the one with greater difference first. If such adjacent
cells do not exist, the BSC selects the adjacent E-UTRAN cells the EUtran-
Description
QRXLEVMINFR value of the priority of which is less than the RSRP.
Instance
Cell
0..31 (0 = 0 dB, 1 = 2 dB, 2 = 4 dB, 3 = 6 dB, , 30 = 60 dB, 31 = 62 dB)
Unit
2dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value
The lower the priority of an adjacent E-UTRAN cell, the greater the level
for fast returning to this cell is required.
To reselect the adjacent cells of a certain priority more easily, set this
parameter to a smaller value.
Change Mode
Offline
2-2249
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.27 Low RSRQ thresholds for EUtran reselection in packet

transfer mode
Full Name
Low RSRQ thresholds for EUtran reselection in packet transfer mode
Abbreviation
EUtranLowThreshQ_T
Managed Object
3GPP Name
3GPP Reference
45.008
This parameter specifies the minimum RSRQ threshold for an MS to be
Description
Instance
Cell
0..31 (0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 = 31 dB)
Unit
dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2250
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.28 Low RSRQ thresholds for FastReturn to LTE

Full Name
Low RSRQ thresholds for FastReturn to LTE
Abbreviation
EUtranLowThreshQFR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the threshold of the difference between the RSRQ
and the minimum RSRQ (EUtranQQUALMINFR) when the BSC selects adjacent E-UTRAN target cells for fast returning to the LTE. To select such
adjacent E-UTRAN target cells based on the RSRQ reported by an MS,
the BSC searches the cells fulfilling the conditions that the difference between the RSRQ and the EUtranQQUALMINFR value is greater than the
EUtranLowThreshQFR value of the cell's priority in the descending order of
cell priorities. For the cells with the same priority, it chooses the one with
greater difference first. If such adjacent cells do not exist, the BSC selects
the adjacent E-UTRAN cells the EUtranQQUALMINFR value of the priority
Description
of which is less than the RSRQ.
Instance
Cell
0..31 (0 = 0 dB, 1 = 1 dB, 2 = 2 dB, 3 = 3 dB, , 30 = 30 dB, 31 = 31 dB)
Unit
2dB
Default Value
[26,24,22,20,18,16,14,12]
Default Value
The lower the priority of an adjacent E-UTRAN cell is, the greater the
RSRQ for fast returning to this cell is required.
2-2251
SJ-20130408140048-016|2013-07-17(R1.0)
To reselect the adjacent cells of a certain priority more easily, set this
parameter to a smaller value.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.29 Minimum RSRQ for EUtran cells based on RSRP in packet

transfer mode
Full Name
Minimum RSRQ for EUtran cells based on RSRP in packet transfer mode
Abbreviation
EUtranQMIN_T
Managed Object
3GPP Name
E-UTRAN_Qmin
3GPP Reference
45.008
Description
Instance
Cell
0..15 (0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
This parameter specifies the minimum RSRQ threshold for an MS to be
Default Value

2-2252
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.30 Minimum RSRQ for EUtran cells in packet transfer mode

Full Name
Minimum RSRQ for EUtran cells in packet transfer mode
Abbreviation
EUtranQQUALMIN_T
Managed Object
3GPP Name
E-UTRAN_QQUALMIN
3GPP Reference
45.008
This parameter specifies the minimum RSRQ for E-UTRAN cell reselection
Description
in packet transfer mode.
Instance
Cell
0..15 (0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2253
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.31 Minimum RSRQ of EUtran cells for FastReturn to LTE

Full Name
Minimum RSRQ of EUtran cells for FastReturn to LTE
Abbreviation
EUtranQQUALMINFR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the minimum RSRQ of adjacent E-UTRAN target
cells for fast returning to the LTE. To select such adjacent E-UTRAN target
cells based on the RSRQ reported by an MS, the BSC searches the cells
fulfilling the conditions that the difference between the RSRQ and the EUtranQQUALMINFR value is greater than the EUtranLowThreshQFR value
of the cell's priority in the descending order of cell priorities. For the cells
with the same priority, it chooses the one with greater difference first. If
such adjacent cells do not exist, the BSC selects the adjacent E-UTRAN
cells the EUtranQQUALMINFR value of the priority of which is less than the
Description
RSRQ.
Instance
Cell
0..15 (0= -34dB, 1= -32dB, 2= -30dB, , 14= -6dB, 15= -4dB. (-34+n*2))
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
It is easy and practical to select adjacent E-UTRAN cells for fast returning
with the parameter EUtranQQUALMINFR.
2-2254
SJ-20130408140048-016|2013-07-17(R1.0)
This parameter can be increased appropriately if it is excepted to fast

return to the LTE only for the high RSRQ of adjacent E-UTRAN target
cells. Otherwise, it should be set to a low value. This parameter is usually

set to the same value for every priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.32 Minimum RX level for EUtran cells in packet transfer mode

Full Name
Minimum RX level for EUtran cells in packet transfer mode
Abbreviation
EUtranQRXLEVMIN_T
Managed Object
3GPP Name
E-UTRAN_QRXLEVMIN
3GPP Reference
45.008
Description
Instance
Cell
-78 dBm)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
0..31 (0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm, 31 =
Default Value
2-2255
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.33 Minimum RX level of EUtran cells for FastReturn to LTE

Full Name
Minimum RX level of EUtran cells for FastReturn to LTE
Abbreviation
EUtranQRXLEVMINFR
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter specifies the minimum receive level of adjacent E-UTRAN
target cells for fast returning to the LTE. To select such adjacent E-UTRAN
target cells based on the RSRP reported by an MS, the BSC searches the
cells fulfilling the conditions that the difference between the RSRP and the
EUtranQRXLEVMINFR value is greater than the EUTRANLowThreshFR
value of the cell's priority in the descending order of cell priorities. For the
cells with the same priority, it chooses the one with greater difference first.
If such adjacent cells do not exist, the BSC selects the adjacent E-UTRAN
cells the EUtranQRXLEVMINFR value of the priority of which is less than
Description
the RSRP.
Instance
Cell
0..31 (0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm, 31 =
-78 dBm)
2-2256
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value
It is easy and practical to select adjacent E-UTRAN cells for fast returning
with the parameter EUtranLowThreshFR.

This parameter can be increased appropriately if it is excepted to fast

return to the LTE only for the high receive level of adjacent E-UTRAN
target cells. Otherwise, it should be set to a low value. This parameter is
usually set to the same value for every priority.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.59.34 Minimum RSRP RX level for EUtran cells in packet transfer

mode
Full Name
Minimum RSRP RX level for EUtran cells in packet transfer mode
Abbreviation
EutranRSRPMIN_T
Managed Object
3GPP Name
E-UTRAN_RSRPmin
3GPP Reference
45.008
Description
Instance
Cell
0..31 (0 = -140 dBm, 1 = -138 dBm, 2 = -136 dBm, , 30 = -80 dBm, 31 =
-78 dBm)
2-2257
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
[0,0,0,0,0,0,0,0]
Default Value

Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60 BSC Um Soft Synchronous Configuration

(GUmsyn)
2.60.1 BSC Um Soft Synchronous Configuration ID
Full Name
BSC Um Soft Synchronous Configuration ID
Abbreviation
GUmsyn
Managed Object
BSC Um Soft Synchronous Configuration
3GPP Name
N/A
3GPP Reference
N/A
Description
BSC Um Soft Synchronous Configuration ID
Instance
None
N/A
2-2258
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Information Configuration->BSC Um Soft Synchronous Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None

Full Name
Abbreviation
UmSynSupport
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether the BSC supports the Um soft syn-
Description
chronization function.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
2-2259
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Disable this function unless specially required.

Enable this function if all cells managed by the BSC are expected to be
involved in the clock offset information collection when the air interface
soft synchronization function is enabled. Otherwise, disable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
GGsmCell.UmSynSupport
Relationship
When the Gumsyn.UmSynSupport switch is disabled, the cell-level

switch determines whether a cell supports this function.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.3 Soft Synchronous Measure Base AB

Full Name
Soft Synchronous Measure Base AB
Abbreviation
SynMeasBaseAB
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to use the AB-based clock offset information collection strategy for the Um software synchronization func-
Description
tion.
Instance
BSC
0: Not Support
1: Support
Unit
N/A
Default Value
2-2260
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value
Use this parameter in initial function application or for adjusting the cycle
when the clock is greatly deviated.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.4 Soft Synchronous Measure Base MTD

Full Name
Soft Synchronous Measure Base MTD
Abbreviation
SynMeasBaseMTD
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to use the MTB-based clock offset
information collection strategy for the Um software synchronization func-
Description
tion.
Instance
BSC
1: Support
Unit
N/A
Default Value
0: Not Support
Default Value

2-2261
SJ-20130408140048-016|2013-07-17(R1.0)
Use this parameter for adjusting the cycle when the clock is slightly
deviated.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.5 Soft Synchronous Measure Base AB Start Time(hour)

Full Name
Soft Synchronous Measure Base AB Start Time(hour)
Abbreviation
BaseABSynMeasSTh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
nization measurement statistics. The unit is hour.
Instance
BSC
0..23
Unit
N/A
Default Value
Default Value
By default, the AB-based clock measurement is started from 1:00 at
night.
measurement statistics at night when traffic is low. Also, the
synchronization measurement statistics time cannot overlap the clock
This parameter represents the start time of the AB-based clock synchro-
It is recommended to implement the AB-based synchronization
synchronization adjustment time.

2-2262
SJ-20130408140048-016|2013-07-17(R1.0)
Change Mode
Offline
Related features
N/A
Related Parameters
BaseABSynMeasSTm
Relationship
This parameter and the Soft Synchronous Measure Base AB Start

Time(minute) parameter work together to represent the start time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.6 Soft Synchronous Measure Base AB Start Time(minute)

Full Name
Soft Synchronous Measure Base AB Start Time(minute)
Abbreviation
BaseABSynMeasSTm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the start time of the AB-based clock syn-
Description
chronous measurement statistics. The unit is minute.
Instance
BSC
0..59
Unit
N/A
Default Value
Default Value
By default, the AB-based clock measurement is started from 1:00 at
night.
It is recommended to implement the AB-based synchronization

Change Mode
Offline
2-2263
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
BaseABSynMeasSTh
Relationship
This parameter and the Soft Synchronous Measure Base AB Start

Time(hour) parameter work together to represent the start time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.7 Soft Synchronous Measure Base AB Duration

Full Name
Soft Synchronous Measure Base AB Duration
Abbreviation
BaseABSynMeasDur
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the duration of the AB-based clock syn-
Description
chronous measurement statistics. The unit is minute.
Instance
BSC
0..120
Unit
Min
Default Value
30
Default Value
By default, the AB-based clock measurement lasts 30 minutes.

By default, the AB-based synchronization measurement statistics lasts
30 minutes. Also, the time cannot overlap the clock synchronization
adjustment time.
Change Mode
Offline
Related features
N/A
Related Parameters
BaseABSynMeasSTh/BaseABSynMeasSTm
2-2264
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
The duration is timed from the start time of the AB-based clock
synchronization measurement statistics.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.8 Soft Synchronous Clock Adjust Start Time(hour)

Full Name
Soft Synchronous Clock Adjust Start Time(hour)
Abbreviation
SynFrameAdjuestSTh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the start time of clock synchronization adjust-
Description
ment. The unit is hour.
Instance
BSC
0..23
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is started from 3:00
at night.
The start time of clock synchronization adjustment is arranged after the

AB-based clock synchronization measurement statistics time and the

MTD-based clock synchronization measurement statistics time. It is
recommended to implement clock synchronization adjustment at night
when traffic is low.
Change Mode
Offline
Related features
N/A
Related Parameters
SynFrameAdjuestSTm
2-2265
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
This parameter and the Soft Synchronous Clock Adjust Start

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.9 Soft Synchronous Clock Adjust Start Time(minute)

Full Name
Soft Synchronous Clock Adjust Start Time(minute)
Abbreviation
SynFrameAdjuestSTm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the start time of clock synchronization adjust-
Description
ment. The unit is minute.
Instance
BSC
0..59
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is started from 3:00
at night.
The start time of clock synchronization adjustment is arranged after the

AB-based clock synchronization measurement statistics time and the

MTD-based clock synchronization measurement statistics time. It is
recommended to implement clock synchronization adjustment at night
when traffic is low.
Change Mode
Offline
Related features
N/A
Related Parameters
SynFrameAdjuestSTh
2-2266
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
This parameter and the Soft Synchronous Clock Adjust Start Time(hour)
parameter work together to represent the start time.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.10 Soft Synchronous Clock Adjust Duration(minute)

Full Name
Soft Synchronous Clock Adjust Duration(minute)
Abbreviation
SynFrameAdjustDur
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the clock synchronization adjustment duration.
Description
The unit is minute.
Instance
BSC
0..120
Unit
N/A
Default Value
30
Default Value
By default, the clock synchronization adjustment lasts 30 minutes.

By default, the clock synchronization adjustment lasts 30 minutes.
Also, the time cannot overlap the clock synchronization measurement
statistics time.
Change Mode
Offline
Related features
N/A
Related Parameters
SynFrameAdjuestSTh/SynFrameAdjuestSTm
Relationship
The duration is timed from the start time of clock synchronization

adjustment.
2-2267
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.11 Soft Synchronous Measure Base MTD Start Time(hour)

Full Name
Soft Synchronous Measure Base MTD Start Time(hour)
Abbreviation
BaseMTDSynMeasSTh
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the start time of the MTD-based clock synchro-
Description
nization measurement statistics. The unit is hour.
Instance
BSC
0..23
Unit
N/A
Default Value
Default Value
By default, the MTD-based clock measurement is started from 2:00
at night.
It is recommended to implement the MTD-based synchronization

Change Mode
Offline
Related features
N/A
Related Parameters
BaseMTDSynMeasSTm
Relationship
Related Interfaces
This parameter and the Soft Synchronous Measure Base MTD Start
N/A
2-2268
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.12 Soft Synchronous Measure Base MTD Start Time(minute)

Full Name
Soft Synchronous Measure Base MTD Start Time(minute)
Abbreviation
BaseMTDSynMeasSTm
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the start time of the MTD-based clock synchro-
Description
nization measurement statistics. The unit is minute.
Instance
BSC
0..59
Unit
N/A
Default Value
Default Value
By default, the MTD-based clock measurement is started from 2:00
at night.
It is recommended to implement the MTD-based synchronization

Change Mode
Offline
Related features
N/A
Related Parameters
BaseMTDSynMeasSTh
Relationship
Time(hour) parameter work together to represent the start time.
Related Interfaces
N/A
Impact on Equipment
0
2-2269
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.13 Soft Synchronous Measure Base MTD Duration

Full Name
Soft Synchronous Measure Base MTD Duration
Abbreviation
BaseMTDSynMeasDur
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter represents the duration of the MTD-based clock synchro-
Description
nization measurement statistics. The unit is minute.
Instance
BSC
0..120
Unit
Min
Default Value
30
Default Value
By default, the MTD-based clock measurement lasts 30 minutes.

By default, the MTD-based synchronization measurement statistics lasts
30 minutes. Also, the time cannot overlap the clock synchronization
adjustment time.
Change Mode
Offline
Related features
N/A
Related Parameters
BaseMTDSynMeasSTh/BaseMTDSynMeasSTm
Relationship
The duration is timed from the start time of the MTD-based clock
synchronization measurement statistics.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2270
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.14 Allow Detriment Adjust

Full Name
Allow Detriment Adjust
Abbreviation
DetrimentAdjust
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If this parameter is enabled, when the remaining time of the current adjustment period is not enough for lossless adjustment, the system directly
performs lossy adjustment; otherwise, lossy adjustment will not be imple-
Description
mented.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
By default, lossy clock synchronization adjustment is not allowed.
Lossy clock synchronization adjustment will cause call drop, but clock
adjustment can be completed very quickly through lossy adjustment.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2271
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.15 Soft Synchronous Measure Base AB(Sunday)

Full Name
Soft Synchronous Measure Base AB(Sunday)
Abbreviation
BaseABSynMeasWeek0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to enable the AB-based synchroniza-
Description
tion measurement on Sunday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the AB-based synchronization measurement is enabled on
Sunday.
According to the actual conditions, it is recommended to implement the
synchronization measurement when traffic is low.
Change Mode
Offline
Related features
N/A
Related Parameters
BaseABSynMeasWeek0~BaseABSynMeasWeek6
This parameter and the Soft Synchronous Measure Base AB Start Time
Relationship
parameters work together to represent the actual time of the AB-based

clock synchronization measurement statistics.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2272
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.16 Soft Synchronous Measure Base AB(Monday)

Full Name
Soft Synchronous Measure Base AB(Monday)
Abbreviation
BaseABSynMeasWeek1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Monday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Monday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

clock synchronous measurement statistics.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2273
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.17 Soft Synchronous Measure Base AB(Tuesday)

Full Name
Soft Synchronous Measure Base AB(Tuesday)
Abbreviation
BaseABSynMeasWeek2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Tuesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Tuesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2274
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.18 Soft Synchronous Measure Base AB(Wednesday)

Full Name
Soft Synchronous Measure Base AB(Wednesday)
Abbreviation
BaseABSynMeasWeek3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Wednesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Wednesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2275
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.19 Soft Synchronous Measure Base AB(Thursday)

Full Name
Soft Synchronous Measure Base AB(Thursday)
Abbreviation
BaseABSynMeasWeek4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Thursday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Thursday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2276
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.20 Soft Synchronous Measure Base AB(Friday)

Full Name
Soft Synchronous Measure Base AB(Friday)
Abbreviation
BaseABSynMeasWeek5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Friday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Friday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2277
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.21 Soft Synchronous Measure Base AB(Saturday)

Full Name
Soft Synchronous Measure Base AB(Saturday)
Abbreviation
BaseABSynMeasWeek6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Saturday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
Saturday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2278
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.22 Soft Synchronous Measure Base MTD(Sunday)

Full Name
Soft Synchronous Measure Base MTD(Sunday)
Abbreviation
BaseMTDSynMeasWeek0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to enable the MTD-based synchroniza-
Description
tion measurement on Sunday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the MTD-based synchronization measurement is enabled
on Sunday.
Change Mode
Offline
Related features
N/A
Related Parameters
BaseMTDSynMeasWeek0~BaseMTDSynMeasWeek6
Relationship
Time parameters work together to represent the actual time of the

MTD-based clock synchronization measurement statistics.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2279
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.23 Soft Synchronous Measure Base MTD(Monday)

Full Name
Soft Synchronous Measure Base MTD(Monday)
Abbreviation
BaseMTDSynMeasWeek1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Monday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
on Monday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2280
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.24 Soft Synchronous Measure Base MTD(Tuesday)

Full Name
Soft Synchronous Measure Base MTD(Tuesday)
Abbreviation
BaseMTDSynMeasWeek2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Tuesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
on Tuesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2281
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.25 Soft Synchronous Measure Base MTD(Wednesday)

Full Name
Soft Synchronous Measure Base MTD(Wednesday)
Abbreviation
BaseMTDSynMeasWeek3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Wednesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
on Wednesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2282
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.26 Soft Synchronous Measure Base MTD(Thursday)

Full Name
Soft Synchronous Measure Base MTD(Thursday)
Abbreviation
BaseMTDSynMeasWeek4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Thursday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
on Thursday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2283
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.27 Soft Synchronous Measure Base MTD(Friday)

Full Name
Soft Synchronous Measure Base MTD(Friday)
Abbreviation
BaseMTDSynMeasWeek5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Friday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the MTD-based synchronization measurement is enabled on
Friday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2284
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.28 Soft Synchronous Measure Base MTD(Saturday)

Full Name
Soft Synchronous Measure Base MTD(Saturday)
Abbreviation
BaseMTDSynMeasWeek6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
tion measurement on Saturday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
on Saturday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2285
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.29 Soft Synchronous Clock Adjust(Sunday)

Full Name
Soft Synchronous Clock Adjust(Sunday)
Abbreviation
SynFrameAdjustWeek0
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether to enable clock synchronization adjust-
Description
ment on Sunday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Sunday.
clock synchronization adjustment when traffic is low.
Change Mode
Offline
Related features
N/A
Related Parameters
SynFrameAdjustWeek0~SynFrameAdjustWeek6
This parameter and the Soft Synchronous Clock Adjust Start Time
Relationship
parameters work together to represent the actual time of the clock

synchronization adjustment.
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2286
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.30 Soft Synchronous Clock Adjust(Monday)

Full Name
Soft Synchronous Clock Adjust(Monday)
Abbreviation
SynFrameAdjustWeek1
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Monday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Monday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2287
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.31 Soft Synchronous Clock Adjust(Tuesday)

Full Name
Soft Synchronous Clock Adjust(Tuesday)
Abbreviation
SynFrameAdjustWeek2
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Tuesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Tuesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2288
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.32 Soft Synchronous Clock Adjust(Wednesday)

Full Name
Soft Synchronous Clock Adjust(Wednesday)
Abbreviation
SynFrameAdjustWeek3
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Wednesday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on
Wednesday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2289
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.33 Soft Synchronous Clock Adjust(Thursday)

Full Name
Soft Synchronous Clock Adjust(Thursday)
Abbreviation
SynFrameAdjustWeek4
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Thursday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Thursday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2290
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.34 Soft Synchronous Clock Adjust(Friday)

Full Name
Soft Synchronous Clock Adjust(Friday)
Abbreviation
SynFrameAdjustWeek5
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Friday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Friday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2291
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.35 Soft Synchronous Clock Adjust(Saturday)

Full Name
Soft Synchronous Clock Adjust(Saturday)
Abbreviation
SynFrameAdjustWeek6
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
ment on Saturday.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default, the clock synchronization adjustment is enabled on Saturday.
Change Mode
Offline
Related features
N/A
Related Parameters
Relationship

Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

2-2292
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.36 Level Difference Threshold of Ncell and Serving Cell

Full Name
Level Difference Threshold of Ncell and Serving Cell
Abbreviation
LevelDiffThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter sets the receive level difference threshold between a
neighbor cell and the serving cell. A neighbor cell can be used as a
Description
reference neighbor cell if N of P differences are less than the threshold.
Instance
BSC
0..63
Unit
N/A
Default Value
Default Value
By default, the level difference is less than five.

If the threshold is adjusted upwards, the soft synchronization
measurement switchover decision can succeed more easily; otherwise,
the neighbor cell is unlikely to be selected as candidate neighbor cell.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
2-2293
SJ-20130408140048-016|2013-07-17(R1.0)
Parameter Modifying
Detail
None
2.60.37 Synchronous Measure handover Start Threshold

Full Name
Synchronous Measure handover Start Threshold
Abbreviation
SynMeasHoStartThs
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
The software synchronous measurement decision is started only when
the serving cell level reaches the synchronous measurement switchover
Description
threshold.
Instance
BSC
0..63
Unit
N/A
Default Value
25
Default Value
By default, the soft synchronization measurement decision is started
when the level is larger than 25.

If the threshold is adjusted downwards, the soft synchronization

measurement switchover decision can succeed more easily; otherwise,
the decision is unlikely to succeed.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2294
SJ-20130408140048-016|2013-07-17(R1.0)
2.60.38 Max Number Synchronous Measure TRX Per Site

Full Name
Max Number Synchronous Measure TRX Per Site
Abbreviation
SynMeasTrxMax
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter sets the maximum number of measured carriers allowed
Description
for each base station.
Instance
BSC
0..108
Unit
N/A
Default Value
Default Value
By default, each base station can have at most three measured carriers.
If the number of measured carriers is increased, soft synchronization
measurement is likely to be implemented, but the services will be
affected.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.39 InterBSC Soft Synchronous Measure Support

Full Name
InterBSC Soft Synchronous Measure Support
2-2295
SJ-20130408140048-016|2013-07-17(R1.0)
Abbreviation
InterBSCSynMeasSupp
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter indicates whether inter-BSC clock software synchronous
Description
measurement is supported.
Instance
BSC
0..1
Unit
N/A
Default Value
Default Value
By default, inter-BSC clock soft synchronization measurement is not
supported.
By default, inter-BSC clock soft synchronization measurement is not
supported.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.40 Whether to adjust frame number

Full Name
Whether to adjust frame number
Abbreviation
IsAdjustFrameNo
Managed Object
3GPP Name
N/A
2-2296
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Sets whether to adjust the frame number when the initial adjustment com-
Description
mand is executed.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default this parameter is set to "Yes".

This parameter is set as required by the operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.60.41 Cycle adjustment

Full Name
Cycle adjustment
Abbreviation
IsCycleAdjust
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
2-2297
SJ-20130408140048-016|2013-07-17(R1.0)
Enables/Disables the cycle adjustment function. After the initial adjustment on a site, the cycle adjustment needs to be enabled because the
Description
clock deviation accumulates.
Instance
BSC
0: No
1: Yes
Unit
N/A
Default Value
Default Value
By default this parameter is set to "Yes".

This parameter is set as required by the operator.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61 AMR Handover Control (GAmrHandoverControl)

2.61.1 Amr Handover Control ID
Full Name
Amr Handover Control ID
Abbreviation
GAmrHandoverControl
Managed Object
AMR Handover Control
3GPP Name
N/A
2-2298
SJ-20130408140048-016|2013-07-17(R1.0)
3GPP Reference
N/A
Description
Amr Handover Control ID
Instance
None
N/A
Unit
N/A
Default Value
N/A
Default Value
None

None
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->AMR Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.2 Uplink receive quality for AMR-FR Threshold

Full Name
Uplink receive quality for AMR-FR Threshold
Abbreviation
HoUlQualThsForAmrFr
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-FR UL receive quality values are higher than the HoUlQualThsForAmrFr value, the BSC performs
Description
a handover on the MS.
2-2299
SJ-20130408140048-016|2013-07-17(R1.0)
Instance
Cell
8..70
Unit
N/A
Default Value
49
Default Value
Generally, the uplink receive quality is poor if the quality level is above 49.
A handover is unlikelier to be performed if the parameter value is higher.
A high value may cause more call drops, and a low value may cause
frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.3 Uplink receive quality for AMR-FR Value N

Full Name
Uplink receive quality for AMR-FR Value N
Abbreviation
HoUlQualAmrFrN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
2-2300
SJ-20130408140048-016|2013-07-17(R1.0)
Unit
N/A
Default Value
Default Value
The default value is recommended for quick and precise handovers.

A handover decision is made in a more accurate manner if the parameter
value is higher, which causes reduction of the real-time performance,
and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.4 Uplink receive quality for AMR-FR Value P

Full Name
Uplink receive quality for AMR-FR Value P
Abbreviation
HoUlQualAmrFrP
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..20
Unit
N/A
Default Value
2
2-2301
SJ-20130408140048-016|2013-07-17(R1.0)
Default Value

frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HoUlQualAmrFrN
Relationship
HoUlQualAmrFrP <= HoUlQualAmrFrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.5 Uplink receive quality for AMR-HR Threshold

Full Name
Uplink receive quality for AMR-HR Threshold
Abbreviation
HoUlQualThsForAmrHr
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
If P (number) among N (number) average AMR-HR UL receive quality values are higher than the HoUlQualThsForAmrHr value, the BSC performs
Description
Instance
Cell
8..70
Unit
N/A
Default Value
49
Default Value
2-2302
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.6 Uplink receive quality for AMR-HR Value N

Full Name
Uplink receive quality for AMR-HR Value N
Abbreviation
HoUlQualAmrHrN
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2303
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.7 Uplink receive quality for AMR-HR Value P

Full Name
Uplink receive quality for AMR-HR Value P
Abbreviation
HoUlQualAmrHrP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2304
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HoUlQualAmrHrN
Relationship
HoUlQualAmrHrP <= HoUlQualAmrHrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.8 Downlink receive quality for AMR-FR Threshold

Full Name
Downlink receive quality for AMR-FR Threshold
Abbreviation
HoDlQualThsForAmrFr
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-FR DL receive quality
values are higher than the HoDlQualThs value, the BSC performs a han-
Description
dover on the MS.
Instance
Cell
8..70
Unit
N/A
Default Value
49
Default Value
2-2305
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.9 Downlink receive quality for AMR-FR Value N

Full Name
Downlink receive quality for AMR-FR Value N
Abbreviation
HoDlQualAmrFrN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
dover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2306
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.10 Downlink receive quality for AMR-FR Value P

Full Name
Downlink receive quality for AMR-FR Value P
Abbreviation
HoDlQualAmrFrP
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
Description
dover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2307
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HoDlQualAmrFrN
Relationship
HoDlQualAmrFrP <= HoDlQualAmrFrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.11 Downlink receive quality for AMR-HR Threshold

Full Name
Downlink receive quality for AMR-HR Threshold
Abbreviation
HoDlQualThsForAmrHr
Managed Object
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-HR DL receive quality
Description
dover on the MS.
Instance
Cell
8..70
Unit
N/A
Default Value
49
Default Value
2-2308
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.12 Downlink receive quality for AMR-HR Value N

Full Name
Downlink receive quality for AMR-HR Value N
Abbreviation
HoDlQualAmrHrN
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
dover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2309
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.13 Downlink receive quality for AMR-HR Value P

Full Name
Downlink receive quality for AMR-HR Value P
Abbreviation
HoDlQualAmrHrP
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
Description
dover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2310
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
N/A
Related Parameters
HoDlQualAmrHrN
Relationship
HoDlQualAmrHrP <= HoDlQualAmrHrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.14 Uplink receive level for AMR-FR Threshold

Full Name
Uplink receive level for AMR-FR Threshold
Abbreviation
HoUlLevThsForAmrFr
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-FR UL receive level values are lower than the HoUlLevThsForAmrFr value, the BSC performs a
Description
handover on the MS.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value
Generally, the electricity level is high if it is above -95dbm, which is the
boundary of a high level and a lower level.
2-2311
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.15 Uplink receive level for AMR-FR Value N

Full Name
Uplink receive level for AMR-FR Value N
Abbreviation
HoUlLevAmrFrN
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2312
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.16 Uplink receive level for AMR-FR Value P

Full Name
Uplink receive level for AMR-FR Value P
Abbreviation
HoUlLevAmrFrP
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2313
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HoUlLevAmrFrN
Relationship
HoUlLevAmrFrP <= HoUlLevAmrFrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.17 Uplink receive level for AMR-HR Threshold

Full Name
Uplink receive level for AMR-HR Threshold
Abbreviation
HoUlLevThsForAmrHr
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-HR UL receive level
values are lower than the
Description
HoUlLevThsForAmrFr value, the BSC performs a handover on the MS.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value
2-2314
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.18 Uplink receive level for AMR-HR Value N

Full Name
Uplink receive level for AMR-HR Value N
Abbreviation
HoUlLevAmrHrN
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-HR UL receive level values are lower than the HoUlLevThsForAmrFr value, the BSC performs a
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2315
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.19 Uplink receive level for AMR-HR Value P

Full Name
Uplink receive level for AMR-HR Value P
Abbreviation
HoUlLevAmrHrP
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-HR UL receive level
values are lower than the
Description
HoUlLevThsForAmrFr value, the BSC performs a handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2316
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode

frequent handovers.
Offline
Related features
Related Parameters
HoUlLevAmrHrN
Relationship
HoUlLevAmrHrP <= HoUlLevAmrHrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.20 Downlink receive level for AMR-FR Threshold

Full Name
Downlink receive level for AMR-FR Threshold
Abbreviation
HoDlLevThsForAmrFr
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-FR DL receive level values are lower than the HoDlLevThsForAmrFr value, the BSC performs a
Description
handover on the MS.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value
2-2317
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.21 Downlink receive level for AMR-FR Value N

Full Name
Downlink receive level for AMR-FR Value N
Abbreviation
HoDlLevAmrFrN
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2318
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.22 Downlink receive level for AMR-FR Value P

Full Name
Downlink receive level for AMR-FR Value P
Abbreviation
HoDlLevAmrFrP
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2319
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
HoDlLevThsForAmrFrN
Relationship
HoDlLevAmrFrP <= HoDlLevAmrFrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.23 Downlink receive level for AMR-HR Threshold

Full Name
Downlink receive level for AMR-HR Threshold
Abbreviation
HoDlLevThsForAmrHr
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
If P (number) among N (number) average AMR-HR DL receive level values are lower than the HoDlLevThsForAmrFr value, the BSC performs a
Description
handover on the MS.
Instance
Cell
0..63
Unit
N/A
Default Value
15
Default Value
2-2320
SJ-20130408140048-016|2013-07-17(R1.0)


frequent handovers.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.24 Downlink receive level for AMR-HR Value N

Full Name
Downlink receive level for AMR-HR Value N
Abbreviation
HoDlLevAmrHrN
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2321
SJ-20130408140048-016|2013-07-17(R1.0)


and vice versa.
Change Mode
Offline
Related features
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.61.25 Downlink receive level for AMR-HR Value P

Full Name
Downlink receive level for AMR-HR Value P
Abbreviation
HoDlLevAmrHrP
Managed Object
3GPP Name
N/A
3GPP Reference
3GPP TS 45.008
Description
handover on the MS.
Instance
Cell
1..20
Unit
N/A
Default Value
Default Value
2-2322
SJ-20130408140048-016|2013-07-17(R1.0)

Change Mode

frequent handovers.
Offline
Related features
Related Parameters
HoDlLevAmrHrN
Relationship
HoDlLevAmrHrP <= HoDlLevAmrHrN
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.62 Power Optimize

2.62.1 Quality threshold of Assignment DownLink Power Optimize
Full Name
Quality threshold of Assignment DownLink Power Optimize
Abbreviation
AssDnPwrQualThs
Managed Object
Power Optimize
3GPP Name
N/A
3GPP Reference
N/A
Description
Quality threshold of downlink power optimization during assignment
Instance
Cell
0..70
Unit
N/A
Default Value
30
Default Value
Usually, the RQ is good when the quality is smaller than 30.
2-2323
SJ-20130408140048-016|2013-07-17(R1.0)
Use the default value. If the assignment success rate is low due to small
initial downlink power during downlink power optimization, decrease the
value. In this case, the downlink power optimization is not required in the
scenarios where the RQ is higher than the threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->Power Optimize
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.62.2 Assignment UpLink Power Optimize with Quality

Full Name
Assignment UpLink Power Optimize with Quality
Abbreviation
AssUpPwrCtrl
Managed Object
Power Optimize
3GPP Name
N/A
3GPP Reference
N/A
Description
Uplink power optimization by quality during assignment
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
1
By default, it is enabled because the assigned uplink power optimization
Default Value
is controlled by the "Assignment and Intra-cell Handover Uplink Power
Optimize" switch. This function is valid only when the switch is on. To
facilitate field operations, this function is enabled by default.
2-2324
SJ-20130408140048-016|2013-07-17(R1.0)
Use the default value. If the uplink power optimization by quality in the
SDCCH measurement report is not required on site, disable this function.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.62.3 Assignment DownLink Power Optimize with Quality

Full Name
Assignment DownLink Power Optimize with Quality
Abbreviation
AssDnPwrCtrl
Managed Object
Power Optimize
3GPP Name
N/A
3GPP Reference
N/A
Description
Downlink power optimization by quality during assignment
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
is controlled by the "Assignment and Intra-cell Handover Downlink Power
Optimize" switch. This function is valid only when the switch is on. To
By default, it is enabled because the assigned downlink power optimization
facilitate field operations, this function is enabled by default.

Use the default value. If the downlink power optimization by quality in the
SDCCH measurement report is not required on site, disable this function.
Change Mode
Offline
2-2325
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.62.4 Quality threshold of Assignment UpLink Power Optimize

Full Name
Quality threshold of Assignment UpLink Power Optimize
Abbreviation
AssUpPwrQualThs
Managed Object
Power Optimize
3GPP Name
N/A
3GPP Reference
N/A
Description
Quality threshold of uplink power optimization during assignment
Instance
Cell
0..70
Unit
N/A
Default Value
30
Default Value
Usually, the RQ is good when the quality is smaller than 30.

Use the default value. If the assignment success rate is low due to small
initial uplink power during uplink power optimization, decrease the value.
In this case, the uplink power optimization is not required in the scenarios
where the RQ is higher than the threshold.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2326
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63 FH Handover Control

2.63.1 The downlink quality of HR to FR load HO
Full Name
The downlink quality of HR to FR load HO
Abbreviation
HrLoadHoDlQuaThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When cell load decreases to a certain limit, the system triggers a handover
from HR to FR, so as to improve the voice quality. However, the quality of
selected HR calls must meet a certain requirement. This parameter indicates the downlink quality threshold when the system triggers a handover
Description
from HR to FR.
Instance
Cell
0..69
Unit
N/A
Default Value
50
Default Value
A call drop may occur due to bad voice quality during handover.
If this parameter is set too large, call drop occurs during handover.
Therefore, set this parameter to an empirical value.
Change Mode
Offline
Related features
N/A
2-2327
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->FH Handover Control
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.2 The downlink quality of FR to HR load HO

Full Name
The downlink quality of FR to HR load HO
Abbreviation
FrLoadHoDlQuaThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the cell load increases to a certain limit, the system triggers a handover from FR to HR, so as to improve the system capacity by acquiring
more channels. However, the downlink quality of selected FR calls must
meet a certain requirement. This parameter specifies the downlink quality
Description
threshold when the system triggers a handover from FR to HR.
Instance
Cell
0..69
Unit
N/A
Default Value
10
Default Value
A certain level of voice quality should be kept after an FR-HR handover is
complete. Therefore, set the parameter to a small value.

The smaller the threshold, the higher the requirement raised on the quality.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2328
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.3 The downlink quality low threshold of HR(V1) to FR quality

HO
Full Name
The downlink quality low threshold of HR(V1) to FR quality HO
Abbreviation
HrQualHoDlQuaLowThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the calls of an HR do not meet handover conditions but their voice
quality is too bad, the system triggers an intra-cell handover from HR (V1) to
FR, so as to improve the voice quality. This parameter indicates the downlink quality lower threshold when the system triggers an intra-cell handover
Description
from HR (V1) to FR.
Instance
Cell
8..70
Unit
N/A
Default Value
39
Default Value

Change Mode
It is acceptable when the voice quality is higher than the threshold. If the
voice quality is lower than the threshold, a handover should be initiated to
improve user experience.
The larger the value, the higher the tolerance on the quality BER of HR
services. The smaller the value, the lower the tolerance on the quality
BER of HR services.
Offline
2-2329
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.4 The downlink quality high threshold of HR(V1) to FR quality

HO
Full Name
The downlink quality high threshold of HR(V1) to FR quality HO
Abbreviation
HrQualHoDlQuaHighThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
FR, so as to improve the voice quality. This parameter indicates the downlink quality upper threshold when the system triggers an intra-cell handover
Description
from HR (V1) to FR.
Instance
Cell
8..70
Unit
N/A
Default Value
46
Default Value
Change Mode
Offline
2-2330
SJ-20130408140048-016|2013-07-17(R1.0)
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.5 The downlink level of HR to FR quality HO

Full Name
The downlink level of HR to FR quality HO
Abbreviation
HrQualHoDlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the calls of an HR or AMR HR do not meet handover conditions but
their voice quality is too bad, the system triggers an intra-cell handover from
HR to FR, so as to improve the voice quality. This parameter indicates the
downlink level threshold when the system triggers an intra-cell handover
Description
from HR to FR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
A handover failure or call drop should not occur due to bad downlink level
during an HR-FR handover.
This parameter can be set according to the empirical value of the level
required during handover.
Change Mode
Offline
Related features
N/A
2-2331
SJ-20130408140048-016|2013-07-17(R1.0)
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.6 The downlink level of HR to FR load HO

Full Name
The downlink level of HR to FR load HO
Abbreviation
HrLoadHoDlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
from HR to FR, so as to improve the voice quality. However, the quality
of selected HR calls must meet a certain requirement. This parameter indicates the downlink level threshold when the system triggers a handover
Description
from HR to FR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2332
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.7 The downlink level of FR to HR load HO

Full Name
The downlink level of FR to HR load HO
Abbreviation
FrLoadHoDlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
more channels. However, the downlink level of selected FR calls must meet
a certain requirement. This parameter specifies the downlink level thresh-
Description
old when the system triggers a handover from FR to HR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
during an FR-HR handover.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2333
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.8 The uplink receive quality high threshold of HR(V3) to FR

quality HO
Full Name
The uplink receive quality high threshold of HR(V3) to FR quality HO
Abbreviation
AmrHrQHoUlQHighThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the calls of an AMR HR do not meet handover conditions but their
voice quality is too bad, the system triggers an intra-cell handover from HR
(V3) to FR, so as to improve the voice quality. This parameter indicates
the uplink quality upper threshold when the system triggers an intra-cell
Description
handover from HR (V3) to FR.
Instance
Cell
8..70
Unit
N/A
Default Value
46
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
2-2334
SJ-20130408140048-016|2013-07-17(R1.0)
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.9 The uplink quality of HR to FR load HO

Full Name
The uplink quality of HR to FR load HO
Abbreviation
HrLoadHoUlQuaThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
from HR to FR, so as to improve the voice quality. However, the quality
of selected HR calls must meet a certain requirement. This parameter indicates the uplink quality threshold when the system triggers a handover
Description
from HR to FR.
Instance
Cell
0..69
Unit
N/A
Default Value
50
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2335
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.10 The uplink quality High threshold of HR(V1) to FR quality

HO
Full Name
The uplink quality High threshold of HR(V1) to FR quality HO
Abbreviation
HrQualHoUlQuaHighThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
FR, so as to improve the voice quality. This parameter indicates the uplink
quality upper threshold when the system triggers an intra-cell handover from
Description
HR (V1) to FR.
Instance
Cell
8..70
Unit
N/A
Default Value
46
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
2-2336
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.11 The uplink level of HR to FR quality HO

Full Name
The uplink level of HR to FR quality HO
Abbreviation
HrQualHoUlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
When the calls of an HR or AMR HR do not meet handover conditions but
their voice quality is too bad, the system triggers an intra-cell handover from
HR to FR, so as to improve the voice quality. This parameter indicates the
uplink level threshold when the system triggers an intra-cell handover from
Description
HR to FR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
A handover failure or call drop should not occur due to bad uplink level
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-2337
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.12 The uplink level of HR to FR load HO

Full Name
The uplink level of HR to FR load HO
Abbreviation
HrLoadHoUlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
from HR to FR, so as to improve the voice quality. However, the quality of
selected HR calls must meet a certain requirement. This parameter indicates the uplink level threshold when the system triggers a handover from
Description
HR to FR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
0
2-2338
SJ-20130408140048-016|2013-07-17(R1.0)
Negotiation With CN
OMC Access Path
No
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.13 The uplink level of FR to HR load HO

Full Name
The uplink level of FR to HR load HO
Abbreviation
FrLoadHoUlLevThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
more channels. However, the uplink level of selected FR calls must meet
a certain requirement. This parameter specifies the uplink level threshold
Description
when the system triggers a handover from FR to HR.
Instance
Cell
0..63
Unit
N/A
Default Value
20
Default Value
during an FR-HR handover.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2339
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.14 The downlink receive quality low threshold of HR(V3) to

FR quality HO
Full Name
The downlink receive quality low threshold of HR(V3) to FR quality HO
Abbreviation
AmrHrQHoDlQLowThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
the downlink quality lower threshold when the system triggers an intra-cell
Description
Instance
Cell
8..70
Unit
N/A
Default Value
39
Default Value

It is acceptable when the voice quality is higher than the threshold. If the
voice quality is lower than the threshold, a handover should be initiated to
improve user experience.
The larger the value, the higher the tolerance on the quality BER of HR
services. The smaller the value, the lower the tolerance on the quality
BER of HR services.
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-2340
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.15 The downlink receive quality high threshold of HR(V3) to

FR quality HO
Full Name
The downlink receive quality high threshold of HR(V3) to FR quality HO
Abbreviation
AmrHrQHoDlQHighThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
the downlink quality upper threshold when the system triggers an intra-cell
Description
Instance
Cell
8..70
Unit
N/A
Default Value
46
Default Value
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
0
2-2341
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.16 The load of HO from HR(V3) to FR

Full Name
The load of HO from HR(V3) to FR
Abbreviation
AmrHrToFrHoLoadThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
An HR(V3)->FR handover is triggered when the load on a cell decreases to
a certain point to improve voice quality. This parameter specifies the load
Description
threshold for a cell to trigger an HR(V3)->FR handover.
Instance
Cell
0..100
Unit
Default Value
20
Default Value
example, if the load on a channel is lower than 20, the AMR FR mode can
be applied to improve user experience.
After a handover to AMR FR mode, the load on the current channel

is increased, but it is possible to reach the load threshold triggering a

handover to dynamic HR mode. Therefore, this parameter must be set
to a value that can not only improve user experience, but also avoid
frequent handovers.
Change Mode
Offline
Related features
N/A
Related Parameters
HrToFrHoLoadThr
Relationship
Related Interfaces
In the same cell, AmrHRThs > HrToFrHoLoadThr >= AmrHrToFrHoLoadThr, FrToAmrHrHoLoadThr > AmrHrToFrHoLoadThr
N/A
2-2342
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.63.17 The load of HO from HR(V1) to FR

Full Name
The load of HO from HR(V1) to FR
Abbreviation
HrToFrHoLoadThr
Managed Object
FH Handover Control
3GPP Name
N/A
3GPP Reference
N/A
An HR(V3)->FR handover is triggered when the load on a cell decreases to
a certain point to improve voice quality. This parameter specifies the load
threshold for a cell to trigger an HR(V3)->FR handover. If the load is lower
than this threshold, priority is given to HR(1)->FR handover, and the next
Description
to HR(V3)->FR handover.
Instance
Cell
0..100
Unit
Default Value
30
Default Value
example, if the load on a channel is lower than 30, the FR mode can be
applied to improve user experience.
After a handover to FR mode, the load on the current channel is increased,
but it is possible to reach the load threshold triggering a handover to
dynamic HR mode. Therefore, this parameter must be set to a value that

can not only improve user experience, but also avoid frequent handovers.
Change Mode
Offline
Related features
N/A
Related Parameters
AmrHrToFrHoLoadThr
2-2343
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
In the same cell, AmrHRThs > HrToFrHoLoadThr >= AmrHrToFrHoLoadThr, FrToHrHoLoadThr > HrToFrHoLoadThr
Related Interfaces
N/A
Impact on Equipment
N/A
Impact on service
N/A
Negotiation With CN
NO
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.64 Cell Option Configuration

2.64.1 Optimize pending block in downlink transfer state
Full Name
Optimize pending block in downlink transfer state
Abbreviation
TransPendingOpt
Managed Object
Cell Option Configuration
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to decrease the times of sending pend-
Description
ing blocks in downlink transfer mode.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
It is an optimization function that is disabled by default. It does not
implicitly change any action in the original version.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
2-2344
SJ-20130408140048-016|2013-07-17(R1.0)
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC Access Path

Configuration->GSM Cell Configuration->Cell Option Configuration
Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.64.2 Optimize dummy block in downlink delay state

Full Name
Optimize dummy block in downlink delay state
Abbreviation
DlDummySendOpt
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
This parameter determines whether to decrease the times of sending
Description
dummy blocks in downlink delay mode.
Instance
Cell
0:No 1:Yes
Unit
N/A
Default Value
Default Value
It is an optimization function that is disabled by default. It does not
implicitly change any action in the original version.

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
2-2345
SJ-20130408140048-016|2013-07-17(R1.0)
Impact on service
Negotiation With CN
No
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2.64.3 Times of interval that send downlink dummy block

Full Name
Times of interval that send downlink dummy block
Abbreviation
DlDummySendIntTime
Managed Object
3GPP Name
N/A
3GPP Reference
N/A
A multiple factor is supported based on the internal of sending dummy
Description
blocks in downlink delay state. The factor helps increase the interval.
Instance
Cell
1..5
Unit
N/A
Default Value
Default Value

Set as required
Change Mode
Offline
Related features
N/A
Related Parameters
N/A
Relationship
N/A
Related Interfaces
N/A
Impact on Equipment
Impact on service
Negotiation With CN
No
2-2346
SJ-20130408140048-016|2013-07-17(R1.0)
OMC Access Path

Parameter Modifying
Version
N/A
Parameter Modifying
Detail
None
2-2347
SJ-20130408140048-016|2013-07-17(R1.0)

Parameter (V6.50.103)

Hochgeladen von

Dokumentinformationen

Copyright

Verfügbare Formate

Dieses Dokument teilen

Dokument teilen oder einbetten

Freigabeoptionen

Stufen Sie dieses Dokument als nützlich ein?

Sind diese Inhalte unangemessen?

Copyright:

Verfügbare Formate

Parameter (V6.50.103)

Hochgeladen von

Copyright:

Verfügbare Formate

ZXUR 9000 GSM

Base Station Controller

Radio Parameters Reference

Additionally, the contents of this document are protected by

contractual confidentiality obligations.

Serial Number: SJ-20130408140048-016

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.1.65 SDCCH->TCH delay............................................................................. 2-68

ZTE Proprietary and Confidential

2.1.99 AMR Half Active Codec Set(7.4kbps)....................................................2-101

ZTE Proprietary and Confidential

2.1.136 Hysteresis of AMROWHS 1................................................................2-144

ZTE Proprietary and Confidential

2.2.3 Protection time for link establishment response .......................................2-181

ZTE Proprietary and Confidential

2.2.40 Ater wait resource timer .......................................................................2-223

ZTE Proprietary and Confidential

2.3.9 Queuing indicator in handover required message ....................................2-260

ZTE Proprietary and Confidential

2.4.11 Enough call duration for preemption......................................................2-291

ZTE Proprietary and Confidential

2.6.11 Max times of resume retry ....................................................................2-330

ZTE Proprietary and Confidential

2.6.47 Support of enhanced radio status procedures........................................2-373

ZTE Proprietary and Confidential

2.6.81 RRM threshold ....................................................................................2-409

ZTE Proprietary and Confidential

2.8.9 Paging Repeat Time for Packet Switched Service ...................................2-445

ZTE Proprietary and Confidential

2.10.14 RAC (RAC) .......................................................................................2-477

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.14.13 Real Time Uplink Load Medium Threshold ..........................................2-548

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.17.28 Access Control ..................................................................................2-623

ZTE Proprietary and Confidential

2.17.65 Times of N200 for SDCCH .................................................................2-666

ZTE Proprietary and Confidential

2.17.102 The TA threshold of allocating channel in BCCH ................................2-706

ZTE Proprietary and Confidential

2.17.139 Start PA output voltage tuning...........................................................2-748

ZTE Proprietary and Confidential

2.17.176 SupportBtsBcchExchg .....................................................................2-785

ZTE Proprietary and Confidential

2.21.15 AMR Half Active Codec Set(6.7kbps)..................................................2-817

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

ZTE Proprietary and Confidential

2.24.23 Downlink receive level Value P ...........................................................2-934

ZTE Proprietary and Confidential

2.24.56 Allow intra-Cell handover attempt due to uplink interference(Middle

ZTE Proprietary and Confidential

2.24.85 Allow Macro-Micro delay handover(Low Speed) ..................................2-997

ZTE Proprietary and Confidential

2.24.117 GSM850 frequency band permitted on traffic HO .............................2-1030

ZTE Proprietary and Confidential

2.24.154 P value of load and quality handover...............................................2-1073

ZTE Proprietary and Confidential

Back to Source Cell when Other

ZTE Proprietary and Confidential

2.25.18 Downlink rapid SDCCH handover enable(Middle Speed) ................... 2-1134