Beruflich Dokumente
Kultur Dokumente
Pgina 1 de 5
Drawbar
SMCS Code: 6153
S/N: ATS1-Up
Illustration 102
Top View
(1) Center the adapter with slotted holes with the threaded holes in the drawbar and the yoke
assembly.
(2) Torque for nine bolts . . . 480 20 Nm (355 15 lb ft)
(3) Torque for eight bolts . . . 440 20 Nm (325 15 lb ft)
file://C:\SIS\TMP\sis531prt.html
02/03/2005
Pgina 2 de 5
Illustration 103
Section A-A
(4) Thickness of 8D-4811 Shim . . . 1.52 mm (0.060 inch)
(5) Thickness of 8D-4812 Shim . . . 0.76 mm (0.030 inch)
(6) Thickness of 8D-4813 Shim . . . 0.25 mm (0.010 inch)
(7) Thickness of 153-7410 Shim . . . 0.12 mm (0.0047 inch)
As required, use shims (4) , (5) , (6) and (7) in order to achieve the following end play with face (9).
. . . 0.0 to 0.5 mm (0.00 to 0.020 inch)
Note: The drawbar must be able to move through all the positions without causing the ball to bind in
the socket.
(A) Mating surfaces must be free of paint and lubricant.
(8) Torque for six bolts . . . 500 65 Nm (368 48 lb ft)
(9) Adapter
file://C:\SIS\TMP\sis531prt.html
02/03/2005
Pgina 3 de 5
Illustration 104
Section B-B
Illustration 105
Side View
file://C:\SIS\TMP\sis531prt.html
02/03/2005
Pgina 4 de 5
Illustration 106
file://C:\SIS\TMP\sis531prt.html
02/03/2005
Pgina 5 de 5
file://C:\SIS\TMP\sis531prt.html
02/03/2005