Sie sind auf Seite 1von 2

EE 481/581 Microwave Engineering

Lecture Notes

Keith W. Whites
Fall 2015

Laboratory for Applied Electromagnetics and Communications


Department of Electrical and Computer Engineering
South Dakota School of Mines and Technology
2015 Keith W. Whites

Whites, EE 481/581

Page 1 of 1

Course Notes:
EE 481/581 Microwave Engineering

Table of Contents
Lecture
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

Title
Introduction. Overview of pertinent electromagnetics.
Telegrapher equations for transmission lines. Power flow.
Phasor wave solutions to the telegrapher equations. Termination of TLs.
TL input impedance, time average power, return and insertion losses. VSWR
Generator and load mismatches on TLs.
The Smith chart.
Transmission line matching using lumped L networks.
Single-stub tuning.
Quarter-wave-transformer matching.
TEM, TE, and TM modes for waveguides. Rectangular waveguide.
Dispersion. Stripline and other planar waveguides.
Microstrip. ADS and Linecalc.
Simple quasi-static moment method analysis of a microstrip.
Impedance and admittance matrices.
S parameters and the scattering matrix.
Properties of S matrices. Shifting reference planes.
S parameters and time average power. Generalized S parameters.
Vector network analyzer.
Proper microwave laboratory practices.
Transmission (ABCD) matrix.
Signal flow graphs.
Measurement errors. TRL calibration of a VNA.
Basic properties of dividers and couplers.
T-junction and resistive power dividers.
Wilkinson power divider.
Quadrature (90) hybrid.
The 180 hybrid.
Coupled line and Lange directional couplers.
Microwave filter design by the insertion loss method.
Scaling of low pass prototype filters. Stepped impedance low pass filters.
Stub synthesis. Kurodas identities. Stub low pass filters.
High pass and bandpass microwave filters. Resonant stub filters.
Coupled line filters.
Coupled line bandpass filters.
Active microwave circuits: Two-port power gains.
Amplifier stability.
Single stage amplifier: Design for maximum gain.
Single stage amplifier: Design for specific gain.

2015 Keith W. Whites

Das könnte Ihnen auch gefallen