0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
44 Ansichten1 Seite
The document provides sales specifications for Triethylene Glycol HP from The Dow Chemical Company dated September 30, 2002. It specifies that the purity must be at least 99.5% by weight, with maximum levels of 0.1% diethylene glycol, 0.3% tetraethylene glycol, 50 ppm acetic acid, 0.1% water, and 25 platinum-cobalt color units. The typical distillation values are an initial boiling point of 280 C and distillation point of 290 C. It also notes that the customer is responsible for determining appropriate use of the product.
The document provides sales specifications for Triethylene Glycol HP from The Dow Chemical Company dated September 30, 2002. It specifies that the purity must be at least 99.5% by weight, with maximum levels of 0.1% diethylene glycol, 0.3% tetraethylene glycol, 50 ppm acetic acid, 0.1% water, and 25 platinum-cobalt color units. The typical distillation values are an initial boiling point of 280 C and distillation point of 290 C. It also notes that the customer is responsible for determining appropriate use of the product.
The document provides sales specifications for Triethylene Glycol HP from The Dow Chemical Company dated September 30, 2002. It specifies that the purity must be at least 99.5% by weight, with maximum levels of 0.1% diethylene glycol, 0.3% tetraethylene glycol, 50 ppm acetic acid, 0.1% water, and 25 platinum-cobalt color units. The typical distillation values are an initial boiling point of 280 C and distillation point of 290 C. It also notes that the customer is responsible for determining appropriate use of the product.
Sales Specifications for Triethylene Glycol HP Specified Material: 00131996-S Specification
Triethylene Glycol HP
Purity, %wt, minimum
Diethylene Glycol, % wt, maximum Tetraethylene Glycol, % wt, maximum Acidity, ppm, maximum, as Acetic Acid Water, %wt, maximum Color, Platinum-Cobalt Units, maximum Appearance
99.5 0.1 0.3 50 0.1 25 Pass
Typical Values for Distillation, 760 mm are IBP 280 C; DP 290 C.
NOTICE: No freedom from any patent owned by Seller or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws and other governmental enactments. Seller assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.