0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
27 Ansichten1 Seite
This document specifies requirements for masonry units used in construction projects. Clay or shale brick must meet AASHTO or ASTM specifications for sewer brick, building brick, or other grade shown on the plans. Concrete brick must meet ASTM C55 Grade A. Concrete masonry blocks can be rectangular or segmented, and solid blocks must meet ASTM C139 or C145 requirements while hollow blocks must meet ASTM C90, with grades as specified in the plans. Dimensions and tolerances for blocks are also individually specified in the plans.
This document specifies requirements for masonry units used in construction projects. Clay or shale brick must meet AASHTO or ASTM specifications for sewer brick, building brick, or other grade shown on the plans. Concrete brick must meet ASTM C55 Grade A. Concrete masonry blocks can be rectangular or segmented, and solid blocks must meet ASTM C139 or C145 requirements while hollow blocks must meet ASTM C90, with grades as specified in the plans. Dimensions and tolerances for blocks are also individually specified in the plans.
This document specifies requirements for masonry units used in construction projects. Clay or shale brick must meet AASHTO or ASTM specifications for sewer brick, building brick, or other grade shown on the plans. Concrete brick must meet ASTM C55 Grade A. Concrete masonry blocks can be rectangular or segmented, and solid blocks must meet ASTM C139 or C145 requirements while hollow blocks must meet ASTM C90, with grades as specified in the plans. Dimensions and tolerances for blocks are also individually specified in the plans.
Brick shall conform to the requirements of one of the following specifications: Sewer Brick Sewer Brick Building Brick -
AASHTO M 91, Grade SM
ASTM C 32, Grade SM AASHTO M 114, Grade SW, or ASTM C 62, Grade SW
The grade will be shown on the Plans or in the Special Provisions.
704.2 Concrete Brick Concrete brick shall conform to the requirements of ASTM C 55, Grade A. 704.2 Concrete Masonry Blocks Concrete masonry blocks may be rectangular or segmented and, when specified, shall have ends shaped to provide interlock at vertical joints. Solid blocks shall conform to the requirements of ASTM C 139 or ASTM C 145, grade as specified. Hollow blocks shall conform to the requirements of ASTM C 90, grade as specified. Dimensions and tolerances shall be as individually specified on the Plans.