Beruflich Dokumente
Kultur Dokumente
Super
ULTRA BOR
www.vikingdrill.com
The flatter point takes a smaller chip. More torque is directed to a smaller area. This allows drilling
into materials with hardness of over 30 on the Rockwell "C" scale.
The split point design gives accurate starting without the use of a center punch.
The split point design is self centering. This limits the normal oversize drilling characteristics.
The rich amber gold color sets it apart from commodity cutting tools.
135 point takes a smaller chip resulting in less heat. Friction is reduced by the amber gold
surface treatment.
WEB
ULTRA BOR
WEB
COBALT
Ultra Bor drills will substantially outperform cobalt drills in work hardening stainless
steel applications. This performance advantage is the result of construction differences between the two types of drills. Cobalt drills, manufactured to Type J NAS
907 specs, have a very thick web. This web is necessary to limit breakage of the
brittle cobalt steel.
Ultra Bor drills are made of special hi-moly tool steel, which is much tougher than
cobalt steel. The web on a Ultra Bor drill can be thinned considerably due to the
toughness of the steel. A Ultra Bor drill with its thin web will penetrate the work
hardening stainless fast enough to continually cut beneath the chip which is hardening from deformation.
This means the drill is cutting softer steel. The cobalt drill, with its thick web, cannot
be fed at a fast enough rate to cut beneath the area which is hardening.
As a result the cobalt drill is continually drilling into hardened steel.
Work hardening grades of stainless steel are the 300 series (with the exception
of 303), which is free machining. Free machining grades include the 400 series in
addition to type 303.
A quick way to identify work hardening vs free machining stainless steel is to
observe the chip formation. Work hardening chips break up during the drilling
process, while free machining chips are long and stringy.
COBALT APPLICATIONS
Cobalt drills are recommended for free machining stainless (400 series & 303),
titanium alloys and other high tensile strength materials.
These applications require the high red hot hardness of cobalt steel to counter
the substantial heat generated in the drilling process.
www.vikingdrill.com
Special Hi-Molybdenum tool steel. 135 split point for fast penetration and accurate starting without a center punch. Precision ground point,
flutes, body, clearance and drill diameter for the ultimate in accuracy and performance. Body and clearance are gold surface treated for
maximum lubricity.
Drills are heat treated at 2185 F and then nitro-carburize finished at 950 F to be measurably harder than high-speed steel. Space age nitrocarburized steel withstands substantially higher drilling temperatures while maintaining sharpness. Recommended for use in work hardening
grades of stainless steel and other hard metal drilling applications. Sizes smaller than #52 have non-split points.
Diameter
Inches
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
Part
No.
38940
38950
38960
38970
38980
38990
39000
39010
39020
39030
39040
39050
39060
39070
39080
39090
39100
39110
39120
39130
39140
39150
39160
39170
39180
39190
39200
39210
39220
39230
92310
92300
92290
92280
92270
92260
92250
92240
92230
92220
88420
88410
88400
88390
88380
88370
88360
88350
88340
88330
88320
88310
88300
88290
88280
88270
88260
88250
88240
88230
WIRE
Wire
Size
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
LETTER
Part
No.
39460
39470
39480
39490
39500
39510
39520
39530
39540
39550
39560
39570
39580
39590
39600
39610
39620
39630
39640
39650
39660
39670
39680
39690
39700
39710
Letter
Size
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Part
No.
SP-13
44110
SP-15
44120
SP-21
44130
SP-26
88660
SP-29
44150
SP-60
88640
SP-115
93840
TRI-1SP
06510
TYPE 240-UB
Description
of Sizes
13 pc set
1/16-1/4 by 64ths
15 pc set
ULTRA BOR
SUPER PREMIUM
FRACTIONAL
Part
No.
05580
05590
05600
05610
05620
05630
05640
05650
05660
05670
05680
05690
05700
05710
05720
05730
05740
05750
05760
05770
05780
05790
05800
05810
05820
05830
05840
05850
05860
22210
22220
22230
22240
22250
22260
22270
22280
22290
22300
22310
22320
22330
22340
22350
22360
1/16-1/2 by 32nds
21 pc set
1/16-3/8 by 64ths
26 pc set
A-Z
29 pc set
1/16-1/2 by 64ths
60 pc set
1-60
115 pc set
1/16-1/2 by 64ths
+ A-Z & 1-60
SETS
13 pc set
1/16-1/4 by 64ths
Type 278 - UB
Reduced Shank
www.vikingdrill.com
ULTRA-DEX
Part
Description
No.
of Sizes
SP-29P - Ultra Dex
44170
1/16 thru 1/2 by 64ths
SETS
Part No.
SP-21R
92170
3/8" SHANK
No.
59200
59210
59220
59230
59240
59250
59260
59270
59280
59290
59300
59310
Diameter
Inches
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
17/32
9/16
19/32
5/8
TYPE 278-UB
Description of Sizes
21 pc set
1/16-1/4 by 64ths,
9/32-1/2 x 32nds
RSP-15
15 pc set
92110
1/16-1/2 by 32nds
RSP-29
29 pc set
92100
1/16-1/2 by 64ths
29 pc set
RSP-29P - Ultra Dex
92150
1/16 thru 1/2 by 64ths
Part
No.
22860
22870
22880
86950
86960
86970
86980
86990
87000
87010
87020
87030
87040
87050
87060
3-FLATS ON SHANK
Diameter
Inches
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
Type 258 - UB
Part
No.
81560
81570
81580
81590
81600
81610
81620
Diameter
Inches
13/32
27/64
7/16
29/64
15/32
31/64
1/2
Part
No.
87070
87080
87090
87100
87110
87120
87130
87140
87150
87160
87170
87180
87190
87200
SETS
Diameter
Inches
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
SETS
TYPE 250 - UB
Part No.
Description of Sizes
13 pc set
SPM-13
66460
1/16-1/4 by 64ths
15 pc set
SPM-15
66470
1/16-1/2 by 32nds
21 pc set
SPM-21
57810
1/16-3/8 by 64ths
29 pc set
SPM-29
66480
1/16-1/2 by 64ths
SPM-29P Ultra Dex 29 pc set
66820
1/16-1/2 by 64ths
Part No.
SPM-21R
92340
1/16-1/4
RSPM-15
57910
RSPM-29
57920
RSPM-29P Ultra Dex
57950
Description of Sizes
Special Hi-Moybdenum tool steel. Gold surface treated body and clearance for maximum lubricity. Heavy-duty construction, 135 split point,
no center punch needed - will not walk. Recommended for work hardening grades of stainless steel and other hard metal drilling applications.
Part
No.
87710
87720
87730
87740
87750
87760
87770
87780
87790
87800
87810
87820
87830
87840
87850
87860
87870
87880
87890
87900
87910
87920
FRACTIONAL
Dia.
Part
Inches
No.
1/16
87930
5/64
87940
3/32
87950
7/64
87960
1/8
87970
9/64
87980
5/32
87990
11/64
88000
3/16
88010
13/64
88020
88030
7/32
88040
15/64
88050
1/4
88060
17/64
88070
9/32
88080
19/64
88090
5/16
89210
21/64
89220
11/32
89230
23/64
89240
3/8
89250
25/64
89260
Dia.
Inches
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
Part
No.
87600
87590
87580
87570
87560
87550
87540
87530
87520
87510
87500
87490
87480
87470
87460
87450
87440
87430
87420
87410
87400
87390
87380
Wire
Size
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
WIRE
Part
Wire
No.
Size
87370 24
87360 25
87350 26
87340 27
87330 28
87320 29
87310 30
87300 31
87290 32
87280 33
87270 34
87260 35
87250 36
87240 37
87230 38
87220 39
87210 40
23360 41
23370 42
23380 43
Part
Wire
No.
Size
23390 44
23400 45
23410 46
23420 47
23430 48
23440 49
23450 50
23460 51
23470 52
23480 53
23490 54
23500 55
23510 56
23520 57
23530 58
23540 59
23550 60
LETTER
Part
Letter
Part Letter
No.
Size
No.
Size
23601 A
23731 N
23611 B
23741 O
23621 C
23751 P
23631 D
23761 Q
23641 E
23771 R
23651 F
23781 S
23661 G
23791 T
23671 H
23801 U
23681 I
23811 V
23691 J
23821 W
23701 K
23831 X
23711 L
23841 Y
23721 M
23851 Z
SETS
Part No.
SPT-29
66490
SPT-60
23560
TYPE 260-UB
Description of Sizes
29 pc set
1/16-1/2 by 64ths
www.vikingdrill.com
60 pc set
#1-60
Quick Release
1/4 Hex Shank
34501
34521
34541
34561
34581
34611
34631
34651
34671
34691
34711
34731
34751
34771
34791
Overall
Length
Inches
2-5/8
3-1/4
3-1/2
3-1/2
3-3/4
4''
4-1/4
3-13/16
4
4-7/32
4-1/4
4-1/2
4-1/2
4-7/8
5
CARDED
Flute
Length
Inches
7/8
1-1/4
1-7/16
1-11/16
1-7/8
2''
2''
2-1/4
2-1/2
2-5/8
2-11/16
2-13/16
2-15/16
3-1/8
3-3/8
Part
No.
34507
34527
34547
34567
34587
34617
34637
34657
34677
34697
34717
34731
34757
34771
34797
SET
Part
No.
34811
Diameter
Inches
Overall
Length
Inches
2-5/8
3-1/4
3-1/2
3-1/2
3-3/4
4''
4-1/4
3-13/16
4
4-7/32''
4-1/4
4-1/2''
4-1/2
4-7/8''
5
1/16
3/32
1/8
5/32
3/16
7/32
1/4
9/32
5/16
11/32
3/8
13/32
7/16
15/32
1/2
Description of Sizes
34803
SET
Part
No.
QR 7A -UB
34804
Qty
of each
1
Description of Sizes
QR 7B-UB
Quick Release
Adaptor
Part
No.
Flute
Length
Inches
7/8
1-1/4
1-7/16
1-11/16
1-7/8
2''
2''
2-1/4
2-1/2
2-5/8''
2-11/16
2-13/16''
2-15/16
3-1/8''
3-3/8
QR 12-UB
SET
QR12-UB
Description of Sizes
Qty
of each
1
Qty
of each
1
SET
Part
No.
34812
QR16-UB
QR 16 - UB
Description of Sizes
Qty
of each
QR7B-UB
www.vikingdrill.com
METRIC DRILLS
Type 643 - UB
Part
Diameter
No.
MM
48760
0.70
48780
0.80
48790
0.85
48800
0.90
49990
0.95
48820
1.00
Drills are heat treated at 2185 F and then nitro-carburize finished at 950 48750
1.05
F to be measurably harder than high speed-steel. Space age nitro-carbur- 48840
1.10
ized steel withstands substantially higher drilling temperatures while main- 48850
1.15
taining sharpness. Recommended for use in work hardening grades of
23270
1.18
48860
1.20
stainless steel and other hard metal drilling applications.
48870
1.25
48880
1.30
48890
1.35
48900
1.40
48910
1.45
48920
1.50
48930
1.55
48940
1.60
48950
1.65
48960
1.70
48970
1.75
48980
1.80
49000
1.90
49020
2.00
49030
2.05
Special Hi-Molybdenum tool steel. Gold surface treated for maximum
49040
2.10
lubricity. Heavy-duty construction, 135 split point, no center punch
49060
2.20
needed - will not walk. Gyroidal Torsion flute and land construction
49080
2.30
yields exceptional performance in deep hole drilling applications.
49100
2.40
49120
2.50
Recommended for work hardening grades of stainless steel and other
49130
2.60
hard metal drilling applications. These drills will drill 12 or more diam49140
2.70
eters deep without drill removal to clear chips. Feed rates twice that
49150
2.80
of standard drills.
49160
2.90
49170
3.00
FRACTIONAL - TYPE XGT-UB
49180
3.10
Part No. Size x Length
Part No. Size x Length
Part No. Size x Length
49190
3.20
39240
1/8 x 6
40780
1/8 x 9
49200
3.30
43050
1/8 x 12
49210
3.40
39250
#29 x 6
40890
9/64 x 9
53130
9/64 x 12
49220
3.50
39260
9/64 x 6
40790
5/32 x 9
43060
5/32 x 12
49230
3.60
39270
5/32 x 6
53140
11/64 x 9
53150
11/64 x 12
49240
3.70
39280
11/64 x 6
40800
3/16 x 9
43070
3/16 x 12
49250
3.80
39300
3/16 x 6
53160
13/64 x 9
53170
13/64 x 12
49260
3.90
39310
#10 x 6
40810
7/32 x 9
43080
7/32 x 12
SETS
39320
13/64 x 6
53180
15/64 x 9
53190
15/64 x 12
39330
7/32 x 6
40820
1/4 x 9
43090
1/4 x 12
Part No.
39340
#1 x 6
40830
9/32 x 9
43100
9/32 x 12
SP-11M
39350
15/64 x 6
40840
5/16 x 9
43110
5/16 x 12
58650
39360
1/4 x 6
40850
11/32 x 9
43120
11/32 x 12
SP-13M
39370
"F" x 6
40860
3/8 x 9
43130
3/8 x 12
49042
39380
9/32 x 6
40870
7/16 x 9
43140
7/16 x 12
SP-19M
39390
5/16 x 6
40880
1/2 x 9
43150
1/2 x 12
58920
39400
11/32 x 6
SP-25M
39410
3/8 x 6
58660
39420
13/32 x 6
SP-41M
49043
39430
7/16 x 6
39440
1/2 x 6
Special Hi-Molybdenum tool steel with 135 split points for fast penetration and accurate starting without a center punch. Precision ground point,
flutes, body, clearance and drill diameter for the ultimate in accuracy and
performance. Body and clearance are gold surface treated for maximum
lubricity.
www.vikingdrill.com
Part
Diameter
No.
MM
49720
8.50
49730
8.60
49740
8.70
49750
8.80
49760
8.90
49770
9.00
49780
9.10
49790
9.20
49800
9.30
49810
9.40
49820
9.50
49830
9.60
49840
9.70
49850
9.80
49860
9.90
49870
10.00
12450
10.10
49880
10.20
12510
10.30
50220
10.40
49890
10.50
12460
10.60
50230
10.70
49900
10.80
12470
10.90
49910
11.00
12480
11.10
49920
11.20
12490
11.40
49930
11.50
12500
11.60
50250
11.70
49940
11.80
12520
11.90
49950
12.00
12530
12.10
49960
12.20
50260
12.30
12540
12.40
49970
12.50
12550
12.60
12570
12.70
50270
12.80
12560
12.90
49980
13.00
643-UB METRIC
Description of Sizes
11 pc set
1.0mm-6.0mm x .5mm
13 pc set
1.0mm-7.0mm x .5mm
19 pc set
1.0mm-10.0mm x .5mm
25 pc set
1.0mm-13.0mm x .5mm
41 pc set
6.0mm-10.0mm x .1mm
S & D-4SP
12250
S & D-8SP
92400
S & D-33SP
92401
Description of Sizes
4 pc set
9/16, 5/8, 3/4 & 1
8 pc set
9/16 - 1 " by 16ths
33 pc set
1/2 - 1 " by 64ths
Part
No.
74001
74011
74021
74031
74041
74051
74061
74071
74081
74091
74101
74111
74121
74131
Dia.
Inches
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
S & D8
74781
Part No.
25500
25502
25504
25510
25512
25514
25520
25522
25524
25530
25532
25534
Diameter Inches
14.0
15.0
16.0
17.0
18.0
19.0
20.0
21.0
22.0
23.0
24.0
25.0
Part
No.
29550
29560
29570
29580
29590
29600
29610
29620
29630
29640
29650
29660
29670
29680
29690
29700
29710
29720
29730
29740
29750
29760
Dia.
Inches
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
Part
No.
29770
29780
29790
29800
29810
29820
29830
29840
29850
29860
29870
29880
29890
29900
29910
29920
29930
29940
29950
29960
29970
29980
Dia.
Inches
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1"
1-1/32
1-1/16
1-3/32
1-1/8
1-5/32
1-3/16
1-7/32
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
Type 281- UB
3/4" Shank,
Silver & Deming
135Split Point
Part
No.
74261
74271
74281
74291
74301
74311
74321
74331
74341
74351
74361
Dia.
Inches
59/64
15/16
61/64
31/32
63/64
1
1-1/16
1-1/8
1-5/32
1-3/16
1-1/4
TYPE 280-UBX
Description of Sizes
4 pc set
9/16, 5/8, 3/4, 1
8 pc set
www.vikingdrill.com
Part No.
29741
29781
29821
29861
29901
29941
29961
29981
Diameter Inches
13/16
7/8
15/16
1
1-1/8
1-1/4
1-3/8
1-1/2
Part
Diameter
No.
Inches
92430
1/16
23150
5/64
89290 3/32
23160
7/64
92440
1/8
92441 9/64
23170
5/32
Part
Diameter
No.
Inches
92442 11/64
92450
3/16
92443 13/64
92444 7/32
92451 15/64
92460
1/4
92452 17/64
Part
Diameter
No.
Inches
92453 9/32
23180 19/64
92470
5/16
92471 21/64
92472 11/32
92473 23/64
92480
3/8
Part
Diameter
No.
Inches
92481 25/64
92482 13/32
92483 27/64
92490
7/16
92491 29/64
92492 15/32
92493 31/64
92500
1/2
Type 421- UB
The square shape of these extractors gives the tools the ability to remove broken bolts, screws and pipes with minimum deformation of the broken part.
To remove the broken threaded part:
Drill a hole in the end of the broken part (left-hand spiral heavy-duty drills are
recommended for this drilling operation), insert extractor and turn counterclockwise using a wrench on the exposed end of the extractor. The broken
part should unscrew without damage to the threads. These extractors will not
chew up or expand the object being removed.
STUDOUT SQUARE STYLE
Screw
Part Extractor Drill
No.
Number Size
70760
E-1
1/8
70770
E-2
3/16
70780
E-3
1/4
70800
E-4
5/16
70810
E-5
3/8
Type 420 - UB
Part
No.
70820
70830
70860
70870
Screw
Extractor Drill
Number Size
E-6
1/2
E-7
9/16
E-8
5/8
E-9
11/16
SETS
LF-13
87652
Description of Sizes
8 pc set
1/16 - 1 /2 by 16ths
12 pc set
1/16 - 1 /4 by 64ths
LF-15
87654
LF-17
87853
LF-29
87854
15 pc set
1/16 - 1 /2 by 32nds
17 pc set
29 pc set
Part No.
Description of Sizes
SQE-4 - Type 421-UB
4 pc set
70840
E 2, 3, 4 & 5
BR-8SQ - Type 421-UB & 240-AL 8 pc set with Drills
70850
E 1, 2, 3 & 4 + 1/8, 3/16,
1/4 & 5/16
CARDED
TYPE 420-AL
Part
Extractor
Drill
No.
Sizes
Size
30137
EX-1 3/32 LH drill
30147 EX-2
1/8 LH drill
30157
EX-3 3/16 LH drill
30167
EX-4
1/4 LH drill
30177 EX-5 5/16 LH drill
BR-10
Remove broken screws, bolts, threaded parts and pipe. To remove the broken threaded part, drill a hole in
the broken part, insert extractor and turn to the left. Broken piece is extracted without damage to threads.
Part
No.
57100
57110
57120
57130
57140
57150
57160
57170
57180
TYPE 420-UB
Screw
Extractor
Number
EX-1
EX-2
EX-3
EX-4
EX-5
EX-6
EX-7
EX-8
EX-9
Drill
Size
5/64
7/64
5/32
1/4
17/64
13/32
17/32
13/16
1-1/8
CARDED
Part
No.
57107
57117
57127
57137
57147
TYPE 420-UB
Screw
Extractor
Number
EX-1
EX-2
EX-3
EX-4
EX-5
Drill
Size
5/64
7/64
5/32
1/4
17/64
SETS
Part No.
Description of Sizes
BR-10 - Type 420-UB & 240-AL
10 pc set with Drills
58510
E 1, 2, 3, 4 & 5 + 3/32, 1/8,
3/16, 1/4 & 5/16
SE-4N - Type 420-UB
4 pc set
47170
E 2, 3, 4 & 5
SE-5N - Type 420 - UB
5 pc set
47180
E 1, 2, 3, 4 & 5
BR-8 - Type 420-UB & 240-AL
8 pc set with Drills
88550
E 1, 2, 3 & 4 + 3/32, 1/8, 3/16 & 1/4
www.vikingdrill.com
STEP DRILLS
Part
No.
00700
00701
00702
00703
00704
00710
00711
00713
00714
00719
Size
1/8-1/2
3/16A
3/16B
1/4-3/4
9/16-1
13/16
1/4 K0
7/8 A
1/4 - 7/8
1/4 A
NOTE : Part No. 00711 3/16 steps at 7/8, 1-1/8 & - 3/8
SETS
00721
00731
00741
SIZES
Quick Release
1/4" Hex Shank
SETS
01441
01451
01461
SIZES
Part#
69130
69140
69150
69160
69180
69190
69220
69200
69170
69210
NOTE :
SETS
69230
69240
69250
Size
1/8 - 1/2
3/16 A
3/16 B
1/4 - 3/4
9/16 - 1
13/16
1/4 K0
7/8 A
1/4 - 7/8
1/4 A
TYPE 78-UBN
STEP DRILLS
Hole
No.
Sizes
Range
13
1/8 - 1/2
6
3/16 - 1/2
12
3/16 - 7/8
9
1/4 - 3/4
8
9/16 - 1"
10 13/16 - 1 - 3/8
10 1/4 - 1 - 3/8
2 7/8- 1 - 1/8
11
1/4 - 7/8
16
1/4 - 1-1/8
Shank
Step
Step
Size Increments Thickness
1/4
1/32
1/8
1/4
1/16
3/8
3/8
1/16
1/8
3/8
1/16
5/32
3/8
1/16
5/32
1/2
1/32
5/32
SEE NOTE
3/8
1/8 *S
3/8
27/64
9/64
3/8
1/16
1/16
3/8
1/16
1/16
Part No. 69220 3/16 steps at 7/8, 1-1/8 & -3/8 for conduit knock-out s.
SIZES
135Split Point
Part No.
95020
95010
95000
94990
Diameter
Wire Gauge
10
11
20
30
Part No.
96050
96060
96070
96071
www.vikingdrill.com
Special Hi-Tungsten tool steel, gold surface treated body and clearance for
maximum lubricity. These reamers are especially designed for the reaming
of structural steel plate commonly found in truck frames, rail cars, bridges
and pressure vessels.
For use only to enlarge previously formed or drilled holes. All tools are constructed with left-hand spiral and right-hand cut. The left-hand spiral eliminates the tendency of the reamer to pull itself into holes.
Part
No.
06390
06400
06410
06420
06430
06440
06450
06460
06470
06480
06484
SET
12270
Diameter
Inches
3/8
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1"
1-1/4
CR-4SP
Point
Diameter
0.250
0.281
0.343
0.343
0.375
0.406
0.468
0.500
0.585
0.594
0.719
Min. Starting
Hole Size
5/16
3/8
7/16
7/16
15/32
1/2
35/64
19/32
5/8
7/8
1"
Special Hi-Tungsten tool steel, gold surface treated body and clearance for maximum lubricity. These reamers are especially designed for
the reaming of structural steel plates commonly found in truck frames,
rail cars, bridges, and pressure vessels. For use only to enlarge previously formed or drilled holes. All tools are constructed with left-hand
spiral and right-hand cut.
The left-hand spiral eliminates the tendency of the reamer to pull itself
into holes.The 51-UB, with the fast spiral, is the more aggressive of the
two styles. It also will fit the needs of users who prefer a stop collar.
Part No.
06381
06391
06501
06401
06411
06421
06432
06431
06441
06531
06451
06461
06471
06481
06491
06482
SET
Diameter Inches
5/16
3/8
7/16
1/2
9/16
5/8
0.652
11/16
3/4
0.776
13/16
7/8
15/16
1"
1-1/16"
1-1/4
Point Diameter
0.215
0.250
0.250
0.281
0.343
0.343
0.375
0.375
0.406
0.406
0.468
0.500
0.585
0.594
0.807
0.719
CR-4FS
12271
12281
SET
SM-4FS
Bridge Reamers - Straight & Spiral Flutes - Taper Shank High-Speed Steel, Surface Treated
These special Hi-Tungsten tool steel reamers with gold surface treated body and clearance are designed to be used with Morse Taper shank
equipment. They are available in both straight and spiral flute configuration and are designed for heavy-duty reaming as encountered in the
fabrication of structural steel assemblies, bridge erection, and ship construction. The tapered design permits the reamer to enter out-of-line holes
often encountered in structural work.
Part
No.
81630
81640
81650
81660
81670
81680
81690
81700
81710
81720
81730
81740
81750
81760
81770
Diameter
Inches
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
Overall
Length
8-1/4
9
9
10
11-3/4
12
12
12
12
12
12
12
12
13
13
Taper
Shank
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#4
#4
Part
No.
83310
83320
83330
83340
83350
83360
83370
83380
83390
83400
83410
83420
83430
83440
83450
Diameter
Inches
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
www.vikingdrill.com
Overall
Length
8-1/4
9
9
10
11-3/4
12
12
12
12
12
12
12
12
13
13
Taper
Shank
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#4
#4
TYPE 52-UB
Type 52- UB
Type 53 - UB
Part
No.
Hex Drive Reamers Black & Gold Finish, High Speed Steel- Spiral Flute
HOLE HOG
Type 284 - UB
20480
20490
20510
20520
20530
20540
20550
20560
20570
20500
20580
20590
BRIDGE LENGTH
Diameter
Inches
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-5/16
Hex Shank
Inches
1-1/16
1-1/16
1-1/16
1-1/4
1-1/4
1-7/16
1-7/16
1-7/16
1- 5/8
1- 5/8
1- 13/16
2
Special Hi - Molybdenum tool steel, gold surface treated body and clearance for maximum lubricity.
This tool is designed for enlarging existing holes exclusively.
The 4 - flute design eliminates the catching and hogging-in experienced with standard S & D drills
when breaking through thinner materials such as truck frames.These core drills may replace tapered
reamers in many applications.
Part
No.
22030
22040
22060
22080
22100
22120
TYPE 53-UB
Part
No.
35580
35590
35610
35620
35630
35640
35650
35660
35670
35600
35680
35690
Diameter
Inches
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-5/16
CAR LENGTH
Hex Shank
Inches
1-1/16
1-1/16
1-1/16
1-1/4
1-1/4
1-7/16
1-7/16
1-7/16
1-5/8
1- 5/8
1-13/16
2
1/2 " Shank (3 -flats on shank) 4 -Flute Core Drill - Super Premium
A selection of core drills and companion (minimum starting hole size) pilot drills in a black steel index.
SETS
SP-8HH
TYPE 284-UB
SP-6HHS
ACRYLIC DRILLS
Super CHIPFREE point is precision ground at a 60 angle for gradual penetration to avoid cracking and chipping of the acrylic material. Special 0 rake angle on cutting edge eliminates "grabbing"
when drill breaks through plastic, acrylic or laminate surfaces.
All sizes over 1/4" have 1/4" shanks.
Type 16 -UB
These high performance drills made from Hi-Moly tool steel will cut holes
in sheet metal, wood or plastics and leave no burr. They will also drill splinter free holes in wood. The special BURROUT point cuts at the circumference of the hole to avoid the break through burr problems common with
standard point drills.
Part
No.
01041
01051
01061
01071
01081
01091
01101
SETS
Part No.
AD-7
31580
Part
No.
32260
31500
31510
31520
32220
31530
32240
31540
32290
31550
32460
31560
32470
31570
SP-6HHL
Type 183- UB
HOLE HOG
TYPE 183-UB
Description of Sizes
7 pc set
www.vikingdrill.com
SETS
Part No.
BF-10
42001
BF-14
42031
FRACTIONAL - TYPE 16 - UB
Diameter
Diameter Part
No.
Inches
Inches
01111
3/16
5/64
01131
7/32
3/32
01151
1/4
7/64
01191
5/16
1/8
01231
3/8
9/64
01271
7/16
5/32
01311
1/2
11/64
TYPE 16 - UB
Description of Sizes
10 pc set
10
Special Hi-Molybdenum tool steel, gold surface treated points for maximum lubricity and chatterproof finish.
These high performance, flute-less tools are:
Free cutting - for ease of use
Single cutting edge - for fast stock removal
Chatterproof - for a micro smooth finish
Type 82-UB
(Piloted)
Type 82-UB 82
Type 82-UB
Piloted Countersinks
Shank
Part
Screw
Diameter
No.
Size
Style Size
A
B
67010 CS1/4
1
1/4
1/4
3/8
67020 CS1/4A
1
1/4
17/64 3/8
67030 CS5/16
1
5/16
5/16
3/8
67040 CS5/16A
1
5/16 21/64 3/8
67050 CS3/8
1
3/8
3/8
1/2
67060 CS3/8A
1
3/8
25/64 1/2
67070 CS7/16
1
7/16
7/16
1/2
67080 CS7/16A
1
7/16 29/64 1/2
67090 CS1/2
1
1/2
1/2
1/2
67100 CS1/2A
1
1/2
33/64 1/2
See right for technical diagram.
Type 82-UB 82
Overall
Length
C
2
2
2-3/16
2-3/16
2-5/8
2-5/8
2-3/4
2-3/4
2-13/16
2-13/16
D
33/64
33/64
41/64
41/64
49/64
49/64
53/64
53/64
15/16
15/16
E
1
1
1-3/16
1-3/16
1-3/8
1-3/8
1-1/2
1-1/2
1-9/16
1-9/16
Pilotless Countersinks
Shank Overall
Part
Diameter of Cut Screw Diameter Length
No.
Size
Style Min
Max
Size
B
C
67110 CS073
3 0.073
15/64
--1/4
1-3/4
67120 CS3/16
2
3/16
17/32
--1/4
1-7/8
67130 CS307
2 0.307
25/32
--1/2
2-5/8
67140 CS307A
2 0.307
25/32
--1/4
2-1/16
67150 CS431
2 0.431
7/8
--1/2
2-13/16
67160 CS1/2B
2
1/2
1-15/32
--1/2
3-1/2
67170 CS5S
2
----No. 4,
51/4
1-1/2
67180 CS6S
2
----No..6
1/4
1-1/2
67190 CS8S
2
----No. 8
1/4
1-5/8
67200 CS10S
2
----No.10
1/4
1-5/8
See right for technical diagram.
Part
No.
67210
67220
67230
67240
67250
67260
67270
67280
67290
11
Type 90-UB 82 90
Diameter
Size
Style Min
DB1/64
3
1/64
DB1/16
3
1/16
DB1/8
3
1/8
DB5/32
2
5/32
DB3/16
2
3/16
DB5/16
2
5/16
DB5/16C
2
5/16
DB9/16
2
9/16
DB1/2
2
1/2
See right for technical diagram.
F
5/32
5/32
5/32
5/32
5/32
5/32
7/32
7/32
1/4
1/4
of Cut
Max
11/64
11/64
15/64
13/32
17/32
25/32
25/32
1-3/32
1-15/32
Deburring Tools
Shank
Diameter
B
3/16
3/16
1/4
1/4
1/4
1/2
1/4
1/2
1/2
Overall
Length
C
1-1/2
1-1/2
1-3/4
1-11/16
1-7/8
2-19/32
2-1/32
2-13/16
3-1/2
D
--9/16
13/16
13/16
1-1/8
1-1/2
17/64
19/64
11/32
25/64
D
------7/16
9/16
13/16
13/16
1-1/8
1-1/2
Type 90-UB
(Pilotless)
SETS
Part No.
SP-4CS
10440
# per/
pack
1
1
1
1
1
1
1
1
1
1
SP-4ACS
10442
SP-6DB
10450
SP-9CS
10443
# per/
E
pack
--1
1
1
1-3/8
1
1-1/4
1
1-9/16 1
2-1/8
1
5/8
1
5/8
1
3/4
1
3/4
1
# per/
E
pack
--1
--1
--1
13/16
1
1
1
1-3/8
1
1-5/32
1
1-9/16
1
2-1/8
1
(Deburring)
TYPE 82 - UB & 90 - UB
Description of Sizes
S tyle 1- Piloted
Style 2 - Pilotless
Style 3 - Deburring
www.vikingdrill.com
Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. Spiral point construction drives chips ahead
of the tap, permitting higher speeds and faster cutting with less torque.
Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or
hand operations. Precision ground threads for the ultimate in accuracy
and performance.
Type 24 - UB
Part
No.
60500
60510
60520
60530
60550
60560
60580
60600
60620
60630
60640
60650
Size &
Pitch
2.5-0.45
3.0-0.50
3.5-0.60
4.0-0.70
5.0-0.80
6.0-1.00
8.0-1.25
10.0-1.50
12.0-1.75
14.0-2.00
16.0-2.00
18.0-2.50
Taper, plug and bottoming styles provide great versatility in tough materials in both blind and through holes. These high performance taps are
available in complete sets of one taper, plug and bottoming tap of the
same size.
Part
No.
Size
60661 2-56
60681 3-48
60701 4-40
60731 5-40
60751 6-32
60761
6-40
60771 8-32
60781 8-36
60791 10-24
60801 10-32
60811 12-24
60821 12-28
60831 1/4-20
60841 1/4-2
Plug Style
Type 23 - UB, 25 - UB
Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or hand
operations. Precision ground threads for the ultimate in accuracy and performance. Taper, plug and bottoming styles provide great versatility
in tough materials, both blind and through holes. These high performance taps are available in complete sets of one taper, plug and bottoming tap of the same size.
Part
No.
60660
60680
60700
60730
60750
60760
60770
60780
60790
60800
60810
60820
60830
60840
60850
TYPE 23 -UB
Part
Size
No.
2-56
60860
3-48
60870
4-40
60880
5-40
60890
6-32
60900
6-40
60910
8-32
60920
8-36
60950
10-24
60960
10-32
60970
12-24
60980
12-28
60990
1/4-20 61400
1/4-28 61410
5/16-18 61420
TYPE 25 -UB
Part
Part
No.
Size
No.
60662
2-56
60872
60682
3-48
60882
60702
4-40
60892
60732
5-40
60902
60752
6-32
60912
60762
6-40
60922
60772
8-32
60952
60782
8-36
60962
60792
10-24 60972
60802
10-32 60982
60812
12-24 60992
60822
12-28 61402
60832 1/4-20 61412
60842 1/4-28
60852 5/16-18
60862 5/16-24
www.vikingdrill.com
Bottoming Style
12
Straight Flute -Includes one each Taper, Plug & Bottoming Style
SETS
Part
No.
60663
60683
60703
60733
60753
60763
60773
60783
60793
60803
60813
60823
60833
60843
60853
60863
Size
1"-14
1 1/8-7
1 1/8-12
1 1/4-7
1 1/4-12
1 3/8-6
1 3/8-12
1 1/2-6
1 1/2-12
Part
No.
60223
60243
60263
60273
60323
60333
60343
60353
60363
60373
60383
60393
60403
60413
60423
60433
60443
60453
Size
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
Part
No.
60463
60473
60483
60493
60503
60513
60523
60533
60543
60553
60563
60573
60583
60593
60603
60609
60613
Size
11/16-11
11/16-16
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
1-14
1-1/8-7
1-1/8-12
1-1/4-7
1-1/4-12
1-3/8-6
1-3/8-12
1-1/2-12
1-1/2-6
Taper Style
13
Part
No.
60222
60242
60262
60272
60322
60332
60342
60352
60362
60372
60382
60392
60402
60412
60422
60432
60442
Size
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
Part
No.
60452
60462
60472
60482
60492
60502
60512
60522
60532
60542
60552
60562
60572
60582
60592
60602
60612
60619
Size
5/8-18
11/16-11
11/16-16
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
1-14
1-1/8-7
1-1/8-12
1-1/4-7
1-1/4-12
1-3/8-6
1-3/8-12
1-1/2-6
1-1/2-12
Plug Style
60224
60244
60264
60274
60324
60334
60344
60354
60364
60374
60384
60394
60404
60414
60424
60434
60444
Size
6-32
8-32
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
Part
No.
60454
60464
60474
60484
60494
60504
60514
60524
60534
60544
60554
60564
60574
60584
60594
60599
60604
60614
Size
5/8-18
11/16-11
11/16-16
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
1-14
1-1/8-7
1-1/8-12
1-1/4-7
1-1/4-12
1-3/8-6
1-3/8-12
1-1/2-12
1-1/2-6
Bottoming
www.vikingdrill.com
TAPS - METRIC
Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity. For general use in production tapping or
hand operations. Precision ground threads for the ultimate in accuracy and performance. Taper, plug and bottoming styles provide great versatility in tough materials, both blind and through holes.
Part No.
60379
60389
60519
60529
60369
60539
60549
60559
60569
60579
60589
60611
61601
61602
61603
61604
61609
61611
61612
61613
61614
61619
61621
61622
61623
61624
Part
No.
61629
61631
61632
61633
61634
61639
61641
61642
61643
61644
61649
61651
61652
61653
61654
61659
61661
61662
61663
61664
61669
61671
61672
61673
61674
61679
TAPS - METRIC
Size
MM
2.5-.45
3.0-.50
3.5-.60
4.0-.70
4.5-.75
5.0-.80
6.0-1.00
7.0-1.00
8.0-1.00
8.0-.1.25
10.0-1.25
10.0-1.50
12.0-1.25
12.0-1.75
14.0-1.50
14.0-2.00
16.0-1.50
16.0-2.00
18.0-2.50
20.0-2.50
24.0-3.00
27.0-3.00
30.0-3.50
33.0-3.50
36.0-4.00
39.0-4.00
Plug Style
Generally used
in thru holes or
in blind holes
with sufficient
clearance.
Part
No.
61681
61682
61683
61684
61689
61691
61692
61693
61694
61699
61701
61702
61703
61704
61709
61711
61712
61713
61714
61719
61721
61722
61723
61724
61729
61731
Bottoming
Generates the
thread to the
bottom of blind
holes.
Type 35 - UB Sets
METRIC - Straight Flute - Includes one each Taper, Plug & Bottoming
SETS
Part
No.
61741
61742
61743
61744
61749
61751
61752
61753
61754
61759
61761
61762
61763
61764
61769
61772
61774
TYPE 35-UB
Size
3.0-.50
4.0-.70
5.0-.80
6.0-1.00
7.0-1.00
8.0-1.00
8.0-1.25
10.0-1.25
10.0-1.50
12.0-1.25
12.0-1.75
14.0-1.50
14.0-2.00
16.0-1.50
16.0-2.00
18.0-2.50
20.0-2.50
Number of
Flutes
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
PLUG-TAPER-BOTTOM
GH
Limit
D-3
D-4
D-4
D-5
D-5
D-5
D-5
D-6
D-6
D-6
D-6
D-7
D-7
D-7
D-7
D-7
D-7
Qty.
per/pack ea.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
www.vikingdrill.com
COMBINATION
DRILL & TAP
TAPER
PIPE TAPS
Type 30 - UB
Type 40-UB
Combination drill and taps are ideally suited for on-site tapping in construction, maintenance and repair, assembly, production and other environments where one pass drilling and tapping saves time and costs.
Hi-Molybdenum tool steel ensures longer tool life. Gold surface treatment
provides maximum lubricity. The self-centering helical point provides
excellent drilling precision and accuracy.
Part No.
73770
73780
73790
73800
73810
73820
73830
73840
Size
4-40
4-48
5-40
5-44
6-32
6-40
8-32
8-36
SETS
Part No.
73991
40-UB - DT-7F
Type 29-UB
TYPE 40 -UB
Part No.
73850
73860
73870
73880
73890
73900
73910
73920
Size
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
Description of Sizes
7 pc set
8 -36, 10-32,1/4 - 28,
5/16 - 24, 3/8 - 24, 7/16 - 20, 1/2 - 20
Fine
73990
40-UB - DT-7C Coarse
7 pc set
8- 32,10 - 24,1/4 - 20,
5/16 -18, 3/8 -16, 7/16 -14, 1/2 -13
Reduced neck taps for machine tapping applications. Reduced neck maximizes coolant flow in machine tapping application for ferrous and
non-ferrous materials. Excellent for aluminum, magnesium, malleable cast iron and stainless steel materials. Hi-Molybdenum tool steel,with gold
treatment for maximum lubricity and reduced neck on tap provide maximum torsion strength for machine tapping applications
Part No.
44300
44310
44320
44330
44340
44350
44360
44370
44380
Size
4-40
6-32
6-40
8-32
8-36
10-24
10-32
12-24
12-28
TYPE 29-UB
H Limits
H2
H3
H2
H3
H2
H3
H3
H3
H3
Overall Length
1-7/8
2
2
2-1/8
2-1/8
2-3/8
2-3/8
2-3/8
2-3/8
Part No.
20010
20020
20030
20040
20050
20060
20100
20110
20120
20130
Size
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
H Limits
H3
H3
H3
H3
H3
H3
H3
H3
H3
H3
Special Hi-Molybdenum tool steel, polished gold finish with black surface treated threads for long life and
rich appearance. These dies are used for threading rods, bolts, studs and other pieces requiring external
threads. The outside hex configuration allows both wrench and die stock use in threading.
Part No.
61000
61010
61020
61030
61040
61050
61060
15
TYPE 27-UB
HEXAGON HIGH-SPEED STEEL DIES
Size
Part No.
Size
Part No.
4-40
61070
1/4-28
61150
6-32
61080
5/16-18
61160
8-32
61090
5/16-24
61170
10-24
61100
3/8-16
61180
10-32
61110
3/8-24
61190
12-24
61120
7/16-14
61200
1/4-20
61130
7/16-20
61210
61140
1/2-13
61220
61230
Size
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
1/8-27 NPT
1/4-18 NPT
TYPE 27-UB
Part No.
60511
60521
60531
60551
60561
60581
60601
60621
60622
Size
3.0 x 0.50
3.5 x 0.60
4.0 x 0.70
5.0 x 0.80
6.0 x 1.00
8.0 x 1.25
10.0 x 1.50
12.0 x 1.75
14.0 x 1.50
www.vikingdrill.com
Overall Length
2-1/2
2-1/2
2-23/32
2-23/32
2-15/16
2-15/16
3-5/32
3-5/32
3-3/8
3-3/8
Part No.
57580
240-UB Drill Sizes
SP-18TD
Description of Sizes
#36, 29, 25, 21, 7, F,
5/16, U & 27/64
Part No.
57990
643-UB Drill Sizes (mm)
21-UB Tap Sizes (mm)
Description of Sizes
Part No.
58010
240-UB Drill Sizes
20-UB Tap Sizes
TAP SETS
TAP SETS
SP-19T - Type 20 - UB
Part No.
61600
61610
58501
240-UB Drill Sizes
20-UB Tap Sizes
Description of Sizes
#36, 29, 25, 21, 7, F
Part No.
60930
240-UB Drill Sizes
24-UB Tap Sizes
Description of Sizes
Part No.
60940
240-UB Drill Sizes
324-UB Tap Sizes
Part No.
58500
240-UB Drill Sizes
280-UB Drill Sizes
24-UB Tap Sizes
Description of Sizes
Description of Sizes
31/64
Spiral Point
Description of Sizes
Part No.
Description of Sizes
Part No.
Spiral Point
All Sets
Packaged
in
Sturdy Black
Steel Index!
Description of Sizes
Part No.
61620
Description of Sizes
www.vikingdrill.com
16
Hi-Molybdenum Super Premium twist drill combined with the corresponding Hi-Tungsten Ultra bor spiral point tap. Both tools are gold
surface treated for maximum lubricity. Precision ground tools for the
ultimate in accuracy and performance.
Part No.
51807
51817
51827
51837
51847
51857
TYPE 34-UB
Size
6-32
6-40
8-32
8-36
10-24
10-32
Part No.
51867
51877
51887
51897
51907
51917
Part No.
51927
51937
51947
51957
51967
51977
Size
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
38 PIECE MRO
PRO-PACK CARDED
DISPLAY
Type 34-UB
INCLUDES:
1 each of : #36-6/32, #33-6-40,
#16/12-24, #14/12-28
2 each of : #29/8-32, #29/8-36,
#25/10-24, #21/10-32, #3/1/4-28,
F/5/16-18, I/516-24, 5/16/3/8-16,
Q/3/8-24, U/7/16-14, 25/64/7/16-20,
7/64/1/2-13, 29/64/1/2-20
Quanity of 4: #7/1/4-20 Combinations.
Special Hi-Tungsten and Hi-Molybdenum tool steels, gold surface treated for maximum lubricity.
Recommended for use in production tapping and drilling of work hardening grades of stainless steel and
other hard metal applications Precision ground tap threads for the ultimate in accuracy and performance.
HSS spiral point taps & HSS hex dies sizes: 1/4-20, 1/4-28,
5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13
& 1/2-20
HSS pipe tap and hex die size: 1/8-27 NPT
T-Handle tap wrench: 3/16"-1/2"
Die stock & Screw pitch gauge
SP-25TDI
Supplied in sturdy plastic case.
23 Pcs. METRIC SPIRAL POINT TAPS &HEX DIES PART NO. 35170
Set contains:
HSS spiral point taps & HSS hex dies sizes: 3.0-.50, 3.5-.60,
4.0-.70, 5.0-.80 6.0-1.00, 8.0-1.25, 10.0-1.50 & 12.0-1.75
HSS pipe tap and hex die size: 1/8-27 NPT
T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2"
Straight handle tap wrench: #4 - 1/2"
Die stock & Screw metric pitch gauge.
SP-23TDI
Supplied in sturdy plastic case.
HSS spiral point taps & HSS hex dies sizes: 6-32, 8-32,
10-24, 10-32, 12-24 & 1/4-20
T-Handle tap wrench: 0 - 1/4"
Economy die stock & Screw pitch gauge.
SP-15TDI
Supplied in black plastic case with clear sliding cover.
14 Pcs. METRIC SPIRAL POINT TAPS & HEX DIES PART NO.
Set contains:
35172
17
Supplied
In
Sturdy
Plastic Case!
Set contains:
HSS straight flute taps & HSS hex dies sizes: 6-32, 8-32, 10-24,
10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16,
3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18,
5/8-11, 5/8-18, 3/4-10, 3/4-16, 1/8-27NPT & 1/4-18NPT.
Straight handle tap wrenches: #4-1/2" & 1/4"-3/4".
Die stocks: MED R/H & 1"R/H.
T- handle tap wrench: 0-1/4".
Screw pitch gauge.
Screw driver & Spiral flute extractors sizes: Ex 1 thru Ex 5.
SF-58TDI
Set contains:
HSS straight flute taps & HSS hex dies sizes: 4-40, 6-32, 8-32,
10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/16-18, 5/16-24, 3/8-16,
3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20
HSS pipe tap and hex die size: 1/8-27 NPT
T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2"
Straight handle tap wrench: #4 - 1/2"
Die stock, Screw pitch gauge & Screw driver
SF-40TDI
Supplied in sturdy plastic case.
Set contains:
HSS spiral point taps & HSS hex dies sizes: 4-40, 6-32, 8-32,
10-24, 10-32, 12-24,1/4-20, 1/4-28, 5/16-18, 5/16-24,
3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13 & 1/2-20.
HSS pipe tap and hex die size: 1/8-27 NPT.
T-Handle tap wrenches: 0 - 1/4" & 3/16"-1/2".
Straight handle tap wrench: #4 - 1/2".
Die stock, Screw pitch gauge & Screw driver.
SP-40TDI
Supplied in sturdy plastic case.
www.vikingdrill.com
14-3/4"
7-3/8"
6 each 1/4-20
3 each 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-16
2 each 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-13
1 each 7/16-20 & 1/2-20
Includes 3 drawer stocking cabinet
6 each 1/4-20
3 each 6-32, 8-32, 10-24, 10-32, 5/16-18 & 3/8-16
2 each 1/4-28, 5/16-24, 3/8-24, 7/16-14 & 1/2-13
1 each 7/16-20 & 1/2-20
Includes 3 drawer stocking cabinet
www.vikingdrill.com
ULTRA BOR
SUPER PREMIUM
Type 20 - UB
Type 23 - UB
COUNTER DISPLAYS
18
Visit us @ www.vikingdrill.com
CAUTION:
www.vikingdrill.com