Beruflich Dokumente
Kultur Dokumente
example
www.homerenergy.com
Objective of Activities
To provide participants with an understanding
of hybrid renewable energy systems design
Allow participants to optimize energy systems
design based on resource availability,
operational constraints and energy cost.
Homer Legacy
Move Cursor onto Products Tab and
Click on Legacy Homer Versions
(this version is free)
http://www.homerenergy.com/HOMER_legacy.html
Click on
Add/Remove
Select
Primary
Load
Select PV
Select
Converter
Select system is
connected to grid
Select PV
Click on
Solar
Resource
1) Enter your
project location
(latitude and
longitude) e.g. for
Negril, JA 18deg
39min N, 78deg
20min W
2) Select
Time
Zone ,
e.g. GMT
-05.00
3) Get Data
Via Internet
(Comes
from data
collected by
NASA and
others)
4) Click
ok
Click on
Primary
Load 1
Enter your
estimates
hourly load
(kW) in this
column to
create your
daily load
profile
Click
OK
As an Example
Click on
Converter
Insert
Converter
Inputs and
click OK. See
next slide for
sample inputs
Click
on PV
Insert PV
inputs and
click ok. See
next slide for
example
inputs
Example of PV Inputs
Click on
Battery
1) Select
Battery
type of
insert new
battery
type info
Insert data
for Battery
and click
ok. See
next slide
for
example of
inputs
Click
on
Grid
Click Edit
to adjust
prices
Click twice
Click calculate to
optimize system
architecture
Example results
NOTE the
optimum
solution is grid
tied with no
battery bank
Economic
parameters
and
constraints
Optimum
solution
provides
lowest
COE
Click on
tabs to
obtain
simulation
results
Simulation Results