Beruflich Dokumente
Kultur Dokumente
JIS G3429 Seamless steel tubes for high pressure gas cylinder.
Page:1 of JIS-Seamless-Pipe.docx
The results are listed in a main JIS steel grade for steel pipe as below.
Standard No
Steel Grade
JIS G3429
Standard Name
Dimension Range
SCM418TK, SCM420TK,
SCM430TK, SCM435TK,
Structural Purpose
SCM440TK
JIS G3444
51, STK 55
21.7-1016.0 mm
STKM11A,STKM12A,
STKM12B, STKM12C,
STKM13A, STKM13B,
STKM13C, STKMI4A,
STKM14B, STKM14C,
JIS G3445
STKM15A, STKM18C,
STKM16A, STKM18C,
STKM17A, STKM17C,
STKM18A, STKM18B,
STKM18C, STKM19A,
STKM19C, STKM20A
JIS G3454
JIS G3455
JIS G3456
10.5-660.4 mm
10.5-660.4 mm
10.5-660.4 mm
Page:2 of JIS-Seamless-Pipe.docx
Standard No
Steel Grade
JIS G3460
JIS G3461
JIS G3464
Standard Name
Dimension Range
10.5-660.4mm
15.9-139.8 mm
15.9-139.8mm
15.9-50.8mm
For Casing:
STM-055, STM-C65,
JIS G3465
STM-R60, STM-1170,
STM-1180, STM-R85
43-142mm
Seamless Steel Tubes for
Drilling
34-180mm
For
Drilling:33.5-50mm
60.5-267.4mm
STFA26
Page:3 of JIS-Seamless-Pipe.docx
JIS seamless pipe testing covers many specifications, including alloy, size, toughness
and composition. Those using steel products purchase the product that fulfills the
requirements they need for what they are building.
And then calculate a steel pipe and tube theoretic weight.
JIS G3441
0.5
>50
1%
<50
0.25
>50
0.5%
<25
0.12
>25-40
0.15
>40-50
0.18
>5:.60
0.20
>60-70
0.23
>70-80
0.25
>80-90
0.30
>90-100
0.40
>100
0.5%
<13
0.25
>13-25
0.40
>25-40
0.60
>40-65
0.80
>65-90
1.00
>90-140
1.20
>140
By agreement
JIS G3444
JIS G3445
JIS G3441
JIS G3445
JIS G3441
Page:4 of JIS-Seamless-Pipe.docx
-0.5,+0.6
>4
-12.5%, +15%
<=3
0 .3
>3
10%
JIS G3441
<=2
0.15
JIS G3445
>2
8%
JIS G3441
JIS G3444
JIS G3445
TOLERANCE ON O.D.
<40A
TOLERANCE ON W.T.
0.5mm
+0.6mm
<=4mm
>50A, <125A
1%
150A
1.6mm
>200A
0.8%
-0.50%
>4mm
+15%
-12.5%
<25A
0.3mm
>32A
0.8%
<=3mm
0.3mm
>3mm
10%
0.5%
JIS G3454 application for Carbon Steel Pipes for Pressure Service
Page:5 of JIS-Seamless-Pipe.docx
Table 4: Tolerance on Outside Diameter and Wall Thickness in JIS G3455, G3456, G3458, G3460
APPLICATION
TOLERANCE ON O.D.
<=50mm
TOLERANCE ON W.T.
0.5mm
>50-160mm
1%
>160-200mm
1.6mm
>200mm
0.8%
<=4mm
0.5mm
>4mm
12.5%
<=2mm
0.2mm
>2mm
10%
<=40mm
0.3mm
>40mm
0.8%
CDS pipe
ERW pipe
O.DMM
O.DMM
pipe
W.T.(mm)
O.DMM
<=100
>100
<=40
<=2
-0,+0.4mm
>2-2.4
-0,+40
>2.4-3.8
-0,+35
-0,+35
>3.8-4.6
-0,+23
-0,+33
>4.6
-0,+28
-0,+28
>40
<=40
-0,+0.3mm
+22
+20
-0
>40
-0
+18
+18
-0
-0
Page:6 of JIS-Seamless-Pipe.docx
SEAMLESS PIPES
ERW PIPES
COLD DRAWN
THROUGH QUENCH
EXCEPT COLD
ELECTRIC
AND NORMALIZED
DRAWN
WELDED PIPES
<=25
0.25
0.10
0.15
0.10
>25.40
0.25
0.15
0.20
0.15
0.25
0.20
0.25
0.20
0.25
0.25
0.30
0.25
>60-80
0.30
0.30
0.40
0.30
>80.100
0.40
0.40
-0.60,+0.40
0.40
-0.60,+0.40
-0.60,+0.40
-0.80,+0.40
-0.60,+0.40
-0.80,+0.40
-0.80,+0.40
-1.00,+0.40
-0.80,+0.40
H.R. pipe
>40-50
>50.60
>100-120
>120-160
+0.4/
-0.8
+0.4/
-1.2
>160-200
-1.8,+0.4
-1.20,+0.40
-1.20,+0.40
-1.20,+0.40
-1.20,+0.40
>200
-2.4,+0.4
-1.60,+0.40
-1.60,+0.40
-1.60,+0.40
-1.60,+0.40
TOLERANCE AN LENGTH
<7m
OD<50mm
>=7m
-0, +7mm
Every 3m increase in length, the plus tolerance be
increased by 3mm with a maximum of 15mm
<7m
OD>=50mm
>=7m
-0, +10mm
Every 3m increase in length, the plus tolerance be
increased by 3mm with a maximum of 15mm
ERW=Electric Welded
Page:7 of JIS-Seamless-Pipe.docx
0.5
>50
1%
<=40
0.2
>40
0.5%
Hot Rolled
Cold Drawn
Packing:
Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Delivery:
Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Get in Touch
If you are interested in our products or cooperating with us, even having a comment or a suggestion please
contact us now, for more detailed information.
Tel.: +8621 3378 0199 | E-mail:sales@sunnysteel.com
Page:8 of JIS-Seamless-Pipe.docx