Beruflich Dokumente
Kultur Dokumente
function properly, Mosaico Engineering requires the following minimum system specifications:
Access to the Internet, preferably over an ISDN line
Microsoft Explorer 5.0 or later
Minimum graphic resolution of 1024x768 pixels
The following software is needed to access Mosaico Engineering, in addition to an Internet connection.
JT2Go video module
This is a component of UGS, and is needed to display the 3D preview of the configured product.
You can download the J2TGo module at the following web page:
http://www.bonfiglioli.com/en/corporate/servizi/mosaico-engineering
Your user ID identifies you as a unique user, and is assigned to you by Bonfiglioli Riduttori S.p.A. Your password ensures that only
you have access to any confidential data in Mosaico Engineering. When you first register, Bonfiglioli Riduttori S.p.A. issues you with
an initial password. You can change this as required using the Change Password function.
There is no need for you to inform Bonfiglioli Riduttori S.p.A. of the changes you make to your password.
No more than one user ID and password can be issued for each active e-mail address.
IMPORTANT! To ensure access security, the system disables your user ID if you enter an incorrect password five
times in succession.
Registration form
To subscribe to the free on-line Mosaico Engineering service, you must first compile the registration form. Fill in at least the fields
marked as obligatory, and give your consent for your personal data to be held and processed. Once you have done so, simply click
on the SUBMIT button to submit your details. The system will immediately send your user ID and password to the e-mail address
you specified in the registration form.
PBefore you can configure a product, you need to select the system of measurement (1) and the standard according to which
technical data are specified (2). Select the two parameters you require, then click Go (3) to begin product configuration.
Confirmation of selection
Start configuration
Product
configuration:
The left hand section of the window
lets you force the
selection of the
values entered in
the product specifications. When you
select one variant
value, the system
automatically
proposes possible variant values for the next
box.
Guide window:
The guide window is regenerated every time you
select a variant value in the left section of the
window, and provides help on your next choice
of value.
Access Mosaico Engineering as a registered user. To select a single product (gearbox, motor or variator), simply select the product
you want, and click the
button that appears at the bottom right of the window.
CONFIRM button: This button flashes when all the basic product configuration
values are complete.
Carry on and configure any selected product options.
Only click the CONFIRM button when you have finished configuring the
products basic variants and options.
The term COUPLED PRODUCT refers to two single products coupled together to form a new product (e.g. a motor and a gearbox
forming a gearmotor).
Access Mosaico Engineering as a registered user. Proceed as follows:
1. Select the 1st product you want.
2. Click the
button.
3. Select the 2nd product you want.
4. Click the
button that appears at the bottom right of the window.
Product
configuration:
The left hand section
of the window lets
you force the selection of the values entered in the product
specifications.
When you select one
variant value, the
system automatically proposes possible
variant values for the
next box.
10
Guide window
The guide window is regenerated every time
you select a variant value in the left section
of the window, and provides help on your
next choice of value.
CONFIRM button:
This button flashes when all the
basic values of the first product
configuration are complete.
Carry on and configure any
selected product options.
Only click the CONFIRM
button when you have finished
configuring the products basic
variants and options.
CONFIRM button:
This button flashes when all the
basic values of the second product
configuration are complete.
Carry on and configure any
selected product options.
Only click the CONFIRM
button when you have finished
configuring
the
products
basic variants and options.
11
Once you have configured a single or coupled product, you can download the relevant technical specifications in either txt or pdf
format.
Technical specifications in
txt format
Technical specifications in
pdf format
Once you have successfully configured the product you want, click the Go button alongside Preview and download drawings
12
When you click on the Go button for 2D and 3D drawings, the following windows open.
Window for downloading 2D and 3D drawings and available product documentation
13
www.bonfiglioli.com
COD. 1751 R3