Beruflich Dokumente
Kultur Dokumente
College of Engineering
Department of Electrical and Computer Engineering
FORMAT FOR PREPARATION OF FINAL YEAR PROJECT REPORT
ARRANGEMENT OF CONTENTS:
The sequence in which the project report material should be arranged and bound should be as
follows:
1. Cover Page
2. Title Page
3. Declaration
4. Approval Sheet
5. Acknowledgement
6. Abstract
7. Table of Contents
8. List of Tables
9. List of Figures
10. List of Symbols, Abbreviations and Nomenclature
11. Chapters (Chapter 1 Introduction, Chapter 2 Literature Review, Chapter 3 System
Design and Description, Chapter 4 Result and Discussion, Chapter 5 Conclusion and
Recommendation)
12. References
13. Appendices
The table and figures shall be introduced in the appropriate places
OF
BACHELOR OF SCIENCE<Font Size 16>
IN
ELECTRICAL AND COMPUTER ENGINEERING (CONTROL
ENGINEERING)
We hereby declare that the project entitled Title of the Project is submitted in
partial fulfillment of the requirement for the award of the degree in BSc Degree in
Electrical
and
Computer
Engineering(Control
Engineering),Wolaita
Sodo
University, is a record of our own work carried out by us during the academic year
2015/16 under the supervision and guidance of Advisor Name, Department of
Electrical and Computer Engineering, College of Engineering. The extent and
source of information are derived from the existing literature and have been
indicated through the project at the appropriate places. The matter embodied in this
work is original and has not been submitted for the award of any other degree,
either in this or any other University.
S/No.
1.
Student Name
ID
.
Signature
.
Place: ____________________________
Date: ____________________________
This is to certify that Project Report entitled Title of the Project that is
submitted by this group members in partial fulfillment of the requirement for
the
award
of
the
degree
BSC
in ELECTRICAL AND
COMPUTER
___________________
________
Name
Sign.
_____________________
Name
_________
Sign.
_____________________
Name
_________
Sign.
_____________________
Chairperson
_________
Sign.
_____________________
Advisor
_________
Sign.
_____________________
Department Head
_________
Sign.
Place: _____________________
Date: _____________________
TABLE OF CONTENTS
CONTENT
PAGE
ABSTRACT.....iii
LIST OF TABLE ....vi
LIST OF FIGURESxviii
LIST OF SYMBOLS..xxvii
1. INTRODUCTION 1
1.1 GENERAL...1
1.2 . . . . . . . . . ....... 2
1.2.1 General ..
1.2.2 . . . . . . . . . . .
1.2.2.1 General
1.2.2.2 . . . . . . . . . .
1.2.2.3 . . . . . . . . . .
1.2.3 . . . . . . . . . . . .
1.3. . .... . . . . .
1.4 . . . . . . . . . . . . . . . . . .
2. LITERATURE REVIEW
2.1 GENERAL ..
2.2 . . . . . . . . . .
2.2 .
Nowadays, almost nothing can be achieved without the use of computers. Most advanced
factories utilize robot arms to manufacture products such as cars, electronic boards, etc. The
majority of robots are industrial robots. This means that robots have replaced people in factories,
laboratories,
1.1 BACKGROUND<Font Size 14>< Bold>
REFERENCES