0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
14 Ansichten1 Seite
This document provides information about blasting requirements for surface mining permit applications. It outlines that applications must include: [1] a blasting plan explaining how the operator will comply with blasting regulations regarding ground vibration and airblast limits; [2] a description of any blast monitoring system to be used, including equipment type, capability, and proposed monitoring procedures and locations; [3] blasting within 500 feet of underground mines requires approval of regulatory authorities concerned with underground miner health and safety.
This document provides information about blasting requirements for surface mining permit applications. It outlines that applications must include: [1] a blasting plan explaining how the operator will comply with blasting regulations regarding ground vibration and airblast limits; [2] a description of any blast monitoring system to be used, including equipment type, capability, and proposed monitoring procedures and locations; [3] blasting within 500 feet of underground mines requires approval of regulatory authorities concerned with underground miner health and safety.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als DOC, PDF, TXT herunterladen oder online auf Scribd lesen
This document provides information about blasting requirements for surface mining permit applications. It outlines that applications must include: [1] a blasting plan explaining how the operator will comply with blasting regulations regarding ground vibration and airblast limits; [2] a description of any blast monitoring system to be used, including equipment type, capability, and proposed monitoring procedures and locations; [3] blasting within 500 feet of underground mines requires approval of regulatory authorities concerned with underground miner health and safety.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als DOC, PDF, TXT herunterladen oder online auf Scribd lesen
OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT (OSM)
Blasting Contact: Kenneth
Eltschlager, Mining Engineer Appalachian Region 3 Parkway Center, Pittsburgh, PA 15220 (412) 937-2169 or keltschlager@osmre.gov
Sec. 780.13 Operation plan: Blasting.
FEDERAL REGISTER CITE: 48 FR 9788 (9806)
PUBLISHED DATE: 03/08/83 EFFECTIVE DATE: 04/07/83
(a) Blasting plan. Each application shall contain a blasting plan
for the proposed permit area, explaining how the applicant will comply with the requirements of Sections 816.61-816.68 of this Chapter. This plan shall include, at a minimum, information setting forth the limitations the operator will meet with regard to ground vibration and airblast, the bases for those limitations, and the methods to be applied in controlling the adverse effects of blasting operations. (b) Monitoring system. Each application shall contain a description of any system to be used to monitor compliance with the standards of Section 816.67 including the type, capability, and sensitivity of any blast-monitoring equipment and proposed procedures and locations of monitoring. (c) Blasting near underground mines. Blasting operations within 500 feet of active underground mines require approval of the State and Federal regulatory authorities concerned with the health and safety of underground miners.
A Missoula County Air Quality Permit Will Be Required For Locations Within Missoula County. A List of The Permitted Equipment Is Contained in Section I.A of The Permit