Beruflich Dokumente
Kultur Dokumente
tech students
of computer science
Title of Project
course
By
STUDENT
(Name)
(roll no.)
Name of Guide
SUPERVISOR
Certificate
Certified that Name of student has carried out the project work presented in this thesis
titled “Title of Project …………….” for the award course from college name under
my supervision. The thesis embodies result of original work and studies carried out by
Student himself and the contents of the thesis do not form the basis for the award of
any other degree to the candidate or to anybody else.
(Name of Supervisor/Guide)
Designation:
Place:
Date:
College certificate
logo
CERTIFICATE
6th Semester of this institute has completed the industrial project (MCA
the best of my knowledge and belief, the above said report has been
Director
1. GENERAL:
The manual is intended to provide broad guidelines to the MCA students in the
preparation of the report. In general, the Project report shall report, in an organized
and scholarly fashion, an account of original work of the students leading to the
development of computerized new package based on requirement provided by client/
user of that package or correlation of facts already known ( behavior of manual
system , hardware etc) and demonstrating a quality as to make a definite contribution
to the advancement of existing system and the students ability to present the findings
in an appropriate manner with actual accomplishments of the work plainly stated and
honestly appraised.
3. SIZE OF THESIS:
The size of thesis should not exceed 300 Pages of typed matter reckoned from the first
page of Chapter 1 to the last page of the Appendix.
The sequence in which the project report material should be arranged and bound
should be as follows:
1. Cover Page & Title Page
2. Certificate form guide
3. Abstract
4. Acknowledgement
5. Table of Contents
6. Objective
7. Requirement Analysis
(i) Requirement specification
(ii) H/w and S/w Requirements
8. Feasibility Study
(i) Cost estimation
(ii) Feasibility report
9. System Design
(i) ER Diagram
(ii) DFD up to 3 level
10. Coding
(i) Only main Modules
(Detail Coding is not required)
11. Testing
(i) Test cases
12. Implementation
13. Appendices
14. References
If required the Tables and figures shall be introduced in the appropriate places.
The dimensions of the final bound report should be 290mm x 205mm. Standard A4
size (297mm x 210mm) paper may be used for preparing the copies.
The Report (at the time of sub