Sie sind auf Seite 1von 1

Frequency Tripler using the CA3028

Here is a simple frequency tripler using a


CA3028 differential amplifier. The CA3028
12 VDC
has internal bias resistors for setting the
differential amplifier's current at about 7 mA
.1uf
when connected as shown. With this current, the 10k 10k .68uh
adj.
output level is about 0 dBm at 30 MHz with a .01uf
1
7
10 MHZ
8
1v p-p, 10 MHz input. Other frequencies and 1 v p-p
CA3028 6.8pf
5
multiplication factors are possible and the .01uf
6
30 MHz
0 dBm
3
CA3028 may be replaced by discrete transistors. 10k
10k
33pf
The amplifier's current may be increased by
connecting a resistor from pin 4 to ground to
achieve more output or for operation with lower Figure 1: X3 multiplier using differential amplifier
power supply voltage. Amplitude modulation may
be applied to the output frequency by capacitor
coupling the audio to pin 2.

8 6

1 5
Specification Limitations:
5k
7

Amplifier current : 20 mA
2
4 Collector voltage: 30 V
2.8k 500 ohms
Power dissipation: 750 mW (up to 55 C)

Figure 2: Inside the CA3028

Das könnte Ihnen auch gefallen