Sie sind auf Seite 1von 4

DI–715

DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)


DIA7W–02

Control Switch Circuit (Cruise Control Switch)

CIRCUIT DESCRIPTION
This circuit Sends the SET/COAST, RES/ACC and CANCEL signals (each voltage) to the ECM.

WIRING DIAGRAM

C16
Cruise Control SW

CRUISE

ECM
19
B–R
IK2
4

BR RES/ SET/ CANCEL


ACC COAST

EB
22
CCS G–Y
E6 CCS
5

I26135

2003 TOYOTA TACOMA (RM1002U)

Author: Date: 977


DI–716
DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

INSPECTION PROCEDURE

1 Check voltage between terminal CCS of ECM connector and body ground.

PREPARATION:
(a) Remove the ECM with the connector being connected.
E6
(b) Turn the ignition switch ON.
CHECK:
Measure the voltage between terminals E6–22 (CCS) of the
ECM connector and the body ground when each control switch
is operated.
CCS (+)
Switch position Voltage
I25145
Neutral 9 – 14 V
RES/ACC 2.1 – 4.0 V
SET/COAST 4.0 – 7.1 V
CANCEL 6.0 – 10.1 V

NG Proceed to next circuit inspection shown in


problem symptoms table (See page DI–700).

OK

2003 TOYOTA TACOMA (RM1002U)

Author: Date: 978


DI–717
DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

2 Check control switch.

PREPARATION:
(a) Remove the steering wheel center pad.
RES/ACC (b) Disconnect the control switch connector.
CHECK:
ON–OFF (a) Measure the resistance between terminals 4 and 5 of the
control switch connector when the control switch is oper-
ated.
OK:
Switch Position Resistance
SET/COAST
CANCEL Neutral ∞ (No continuity)
RES/ACC 235 – 245 Ω
SET/COAST 617 – 643 Ω
CANCEL 1509 – 1571 Ω

(b) Check the continuity between terminals 4 and 5 of the


control switch connector when the main switch is held on
and off.
OK:
I26002 Switch Position Tester connection Specified condition
OFF – No continuity
ON 4–5 Continuity

NG Replace control switch.

OK

3 Check harness and connector between ECM and cruise control switch, and
cruise control switch and body ground (See page IN–28).

NG Repair or replace harness or connector.

OK

2003 TOYOTA TACOMA (RM1002U)

Author: Date: 979


DI–718
DIAGNOSTICS – CRUISE CONTROL SYSTEM (w/ ETCS–i)

4 Check CRUISE MAIN indicator light (See page DI–713).

NG Replace combination meter.

OK

Check and replace ECM (See page IN–28 ).

2003 TOYOTA TACOMA (RM1002U)

Author: Date: 980

Das könnte Ihnen auch gefallen