Sie sind auf Seite 1von 1
fa rB[s|Lp Toplok Components TH B51 Toptok Omega Transoms Toplok Omega Transom is used to provide a firm support for steel battens, It's a press bent section with flanges on both sides / back to back angle which provides strong support for working platforms 0.9m 3) tam 1am 25m [Bl BSL Toptok Omega Hop - Up Brackets ‘Omega Hop-Up Brackets incorporates. support Omega Sections for locating battens and can be easily attached to the Cup joints. For fitm location 2 board & 3 board Hop-Up Brackets include the Toplok Nodes to fit the Standards / Ledgers. [i 851 Toptok Galvanised Steel Battens Available in a range of three bay sizes with non-slip working surface and are used with Omega Transoms. They form stable and robust working sizes, [i BSL Toplok Intermediate transoms Intermediate Transoms are available for use with Hop-Up Brackets where distances between Standards exceeds the ‘maximum permitted span of the scaffold board. [i 8S: Bridging Horizontal For use in access scaffolds to allow vehicles entrance at the bbase of the scaffold or to span over areas where a strong base cannot be found, These components are used to provide a working platform complete with the necessary guardrails and mustbe provided at every working level ‘Omega Single Boars | 01026 ‘Omega Two Board bingy Omega ives Boud | 01028 platforms and are available in different 2.5mx0238mx0.057m| 01029 1am x0.238m:0057m| 91030 1.3mx0.238m%00S7m) 01031 13m | 01032 12m 01033 0.5m |__ 01034 5.0m 01035 i 01036 as Al oa rented vt 8a PDF’ . | download the Free tral online st nitropa.com/prafessional

Das könnte Ihnen auch gefallen