Beruflich Dokumente
Kultur Dokumente
info
IEC Standards
IEC 60034-18-1 Ed. 1.0 b Cor.1 IEC 60034-18-1 Ed. 1.0 b Cor.1:1992 Corrigendum 1 - Rotating electrical
machines - Part 18: Functional evaluation of insulation systems - Section 1: General guidelines
IEC 60034-18-21 Amd.1 Ed. 1.0 b IEC 60034-18-21 Amd.1 Ed. 1.0 b:1994 Amendment No. 1
IEC 60034-18-21 Amd.2 Ed. 1.0 b IEC 60034-18-21 Amd.2 Ed. 1.0 b:1996 Amendment No. 2
IEC 60034-18-21 Ed. 1.0 b IEC 60034-18-21 Ed. 1.0 b:1992 Rotating electrical machines - Part 18: Functional
evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation
and classification
IEC 60034-18-22 Ed. 2.0 b IEC 60034-18-22 Ed. 2.0 b:2000 Rotating electrical machines - Part 18-22:
Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of
changes and insulation component substitutions
IEC 60034-18-31 Amd.1 Ed. 1.0 b IEC 60034-18-31 Amd.1 Ed. 1.0 b:1996 Amendment No. 1
IEC 60034-18-31 Ed. 1.0 b IEC 60034-18-31 Ed. 1.0 b:1992 Rotating electrical machines - Part 18: Functional
evaluation of insulation systems - Section 31: Test procedures for form-wound windings - Thermal evaluation
and classification of insulation systems
IEC 60034-19 Ed. 1.0 b IEC 60034-19 Ed. 1.0 b:1995 Rotating electrical machines - Part 19: Specific test
methods for d.c. machines on conventional and rectifier-fed supplies
IEC 60034-2-1 Ed. 1.0 b IEC 60034-2-1 Ed. 1.0 b:2007 Rotating electrical machines - Part 2-1:Standard
methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
IEC 60034-26 Ed. 1.0 b IEC 60034-26 Ed. 1.0 b:2006 Rotating electrical machines - Part 26: Effects of
unbalanced voltages on the performance of three-phase cage induction motors
IEC 60034-28 Ed. 1.0 b IEC 60034-28 Ed. 1.0 b:2007 Rotating electrical machines - Part 28: Test methods for
determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
IEC 60034-29 Ed. 1.0 b IEC 60034-29 Ed. 1.0 b:2008 Rotating electrical machines - Part 29: Equivalent
loading and superposition techniques - Indirect testing to determine temperature rise
IEC 60034-2A Ed. 1.0 b IEC 60034-2A Ed. 1.0 b:1974 Rotating electrical machines - Part 2: Methods for
determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60055-2 Amd.1 Ed. 1.0 b IEC 60055-2 Amd.1 Ed. 1.0 b:1989 Amendment No. 1
IEC 60055-2 Amd.2 Ed. 1.0 b IEC 60055-2 Amd.2 Ed. 1.0 b:2005 Amendment 2 - Paper-insulated
metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding
gas-pressure and oil-filled cables) - Part 2: General and const
IEC 60055-2 Ed. 1.0 b IEC 60055-2 Ed. 1.0 b:1981 Paper-insulated metal-sheathed cables for rated voltages up
to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2:
General and construction require
IEC 60059 Amd.1 Ed. 2.0 b IEC 60059 Amd.1 Ed. 2.0 b:2009 Amendment 1 - IEC standard current ratings
IEC 60059 Ed. 2.1 b IEC 60059 Ed. 2.1 b:2009 IEC standard current ratings
IEC 60064 Amd.1 Ed. 6.0 b IEC 60064 Amd.1 Ed. 6.0 b:2000 Amendment 1
IEC 60064 Amd.2 Ed. 6.0 b IEC 60064 Amd.2 Ed. 6.0 b:2002 Amendment 2
IEC 60064 Amd.3 Ed. 6.0 b IEC 60064 Amd.3 Ed. 6.0 b:2005 Amendment 3 - Tungsten filament lamps for
domestic and similar general lighting purposes - Performance requirements
IEC 60064 Amd.4 Ed. 6.0 b IEC 60064 Amd.4 Ed. 6.0 b:2007 Amendment 4 - Tungsten filament lamps for
domestic and similar general lighting purposes - Performance requirements
IEC 60064 Amd.5 Ed. 6.0 b IEC 60064 Amd.5 Ed. 6.0 b:2009 Amendment 5 - Tungsten filament lamps for
domestic and similar general lighting purposes - Performance requirements
IEC 60064 Ed. 6.3 b IEC 60064 Ed. 6.3 b:2005 Tungsten filament lamps for domestic and similar general
lighting purposes - Performance requirements
IEC 60071-1 Ed. 8.0 b IEC 60071-1 Ed. 8.0 b:2006 Insulation co-ordination - Part 1: Definitions, principles and
rules
IEC 60071-2 Ed. 3.0 b IEC 60071-2 Ed. 3.0 b:1996 Insulation co-ordination - Part 2: Application guide
IEC 60072-1 Ed. 6.0 b IEC 60072-1 Ed. 6.0 b:1991 Dimensions and output series for rotating electrical
machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
IEC 60072-2 Ed. 1.0 b IEC 60072-2 Ed. 1.0 b:1990 Dimensions and output series for rotating electrical
machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3 Ed. 1.0 b IEC 60072-3 Ed. 1.0 b:1994 Dimensions and output series for rotating electrical
machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50
IEC 60076-1 Amd.1 Ed. 2.0 b IEC 60076-1 Amd.1 Ed. 2.0 b:1999 Amendment 1
IEC 60076-1 Ed. 2.1 b IEC 60076-1 Ed. 2.1 b:2000 Power transformers - Part 1: General
IEC 60076-10 Ed. 1.0 b IEC 60076-10 Ed. 1.0 b:2001 Power transformers - Part 10: Determination of sound
levels
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60076-10-1 Ed. 1.0 b IEC 60076-10-1 Ed. 1.0 b:2005 Power transformers - Part 10-1: Determination of
sound levels - Application guide
IEC 60076-11 Ed. 1.0 b IEC 60076-11 Ed. 1.0 b:2004 Power transformers - Part 11: Dry-type transformers
IEC 60076-12 Ed. 1.0 b IEC 60076-12 Ed. 1.0 b:2008 Power transformers - Part 12: Loading guide for dry-type
power transformers
IEC 60076-13 Ed. 1.0 b IEC 60076-13 Ed. 1.0 b:2006 Power transformers - Part 13: Self-protected liquid-filled
transformers
IEC 60076-15 Ed. 1.0 b IEC 60076-15 Ed. 1.0 b:2008 Power transformers - Part 15: Gas-filled power
transformers
IEC 60076-2 Ed. 2.0 b IEC 60076-2 Ed. 2.0 b:1993 Power transformers - Part 2: Temperature rise
IEC 60076-2 Ed. 2.0 b Cor.1 IEC 60076-2 Ed. 2.0 b Cor.1:1997 Corrigendum 1 - Power transformers - Part 2:
Temperature rise
IEC 60076-3 Ed. 2.0 b IEC 60076-3 Ed. 2.0 b:2000 Power transformers - Part 3: Insulation levels, dielectric
tests and external clearances in air
IEC 60076-4 Ed. 1.0 b IEC 60076-4 Ed. 1.0 b:2002 Power transformers - Part 4: Guide to the lightning impulse
and switching impulse testing - Power transformers and reactors
IEC 60076-5 Ed. 3.0 b IEC 60076-5 Ed. 3.0 b:2006 Power transformers - Part 5: Ability to withstand short
circuit
IEC 60076-6 Ed. 1.0 b IEC 60076-6 Ed. 1.0 b:2007 Power transformers - Part 6: Reactors
IEC 60076-7 Ed. 1.0 b IEC 60076-7 Ed. 1.0 b:2005 Power transformers - Part 7: Loading guide for
oil-immersed power transformers
IEC 60076-8 Ed. 1.0 b IEC 60076-8 Ed. 1.0 b:1997 Power transformers - Part 8: Application guide
IEC 60076-SER Ed. 1.0 b IEC 60076-SER Ed. 1.0 b:2009 Power transformers - ALL PARTS
IEC 60077-1 Ed. 1.0 b IEC 60077-1 Ed. 1.0 b:1999 Railway applications - Electric equipment for rolling stock
- Part 1: General service conditions and general rules
IEC 60077-3 Ed. 1.0 b IEC 60077-3 Ed. 1.0 b:2001 Railway applications - Electric equipment for rolling stock
- Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
IEC 60079-0 Ed. 5.0 b IEC 60079-0 Ed. 5.0 b:2007 Explosive atmospheres - Part 0: Equipment - General
requirements
IEC 60079-1 Ed. 6.0 b IEC 60079-1 Ed. 6.0 b:2007 Explosive atmospheres - Part 1: Equipment protection by
flameproof enclosures d
IEC 60079-1 Ed. 6.0 b Cor.1 IEC 60079-1 Ed. 6.0 b Cor.1:2008 Corrigendum 1 - Explosive atmospheres - Part
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60086-1 Ed. 10.0 b IEC 60086-1 Ed. 10.0 b:2006 Primary batteries - Part 1: General
IEC 60086-2 Ed. 11.0 b IEC 60086-2 Ed. 11.0 b:2006 Primary batteries - Part 2: Physical and electrical
specifications
IEC 60086-3 Ed. 2.0 b IEC 60086-3 Ed. 2.0 b:2004 Primary batteries - Part 3: Watch batteries
IEC 60086-4 Ed. 3.0 b IEC 60086-4 Ed. 3.0 b:2007 Primary batteries - Part 4: Safety of lithium batteries
IEC 60086-5 Ed. 2.0 b IEC 60086-5 Ed. 2.0 b:2005 Primary batteries - Part 5: Safety of batteries with aqueous
electrolyte
IEC 60092-3 Amd.1 Ed. 2.0 b IEC 60092-3 Amd.1 Ed. 2.0 b:1969 Amendment 1 - Part 3: Cables (construction,
testing and installations)
IEC 60092-3 Amd.2 Ed. 2.0 b IEC 60092-3 Amd.2 Ed. 2.0 b:1971 Amendment 2 - Electrical installations in
ships - Part 3: Cables (construction, testing and installations)
IEC 60092-3 Amd.3 Ed. 2.0 b IEC 60092-3 Amd.3 Ed. 2.0 b:1973 Amendment 3 - Electrical installations in
ships - Part 3: Cables (construction, testing and installations)
IEC 60092-3 Amd.4 Ed. 2.0 b IEC 60092-3 Amd.4 Ed. 2.0 b:1974 Amendment 4 - Electrical installations in
ships - Part 3: Cables (construction, testing and installations)
IEC 60092-3 Amd.5 Ed. 2.0 b IEC 60092-3 Amd.5 Ed. 2.0 b:1979 Amendment 5 - Electrical installations in
ships - Part 3: Cables (construction, testing and installations)
IEC 60092-3 Amd.6 Ed. 2.0 b IEC 60092-3 Amd.6 Ed. 2.0 b:1984 Amendment 6 - Electrical installations in
ships - Part 3: Cables (construction, testing and installations)
IEC 60092-3 Ed. 2.0 b IEC 60092-3 Ed. 2.0 b:1965 Electrical installations in ships - Part 3: Cables
(construction, testing and installations)
IEC 60092-351 Ed. 3.0 en IEC 60092-351 Ed. 3.0 en:2004 Electrical installations in ships - Part 351: Insulating
materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
IEC 60092-353 Amd.1 Ed. 2.0 b IEC 60092-353 Amd.1 Ed. 2.0 b:2001 Amendment 1
IEC 60092-353 Ed. 2.0 b IEC 60092-353 Ed. 2.0 b:1995 Electrical installations in ships - Part 353: Single and
multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV
IEC 60092-354 Ed. 2.0 en IEC 60092-354 Ed. 2.0 en:2003 Electrical installations in ships - Part 354: Single-
and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV
(Um = 36 kV)
IEC 60092-359 Amd.1 Ed. 1.0 b IEC 60092-359 Amd.1 Ed. 1.0 b:1994 Amendment No. 1
IEC 60092-359 Amd.1 Ed. 1.0 b Cor.1 IEC 60092-359 Amd.1 Ed. 1.0 b Cor.1:1995 Corrigendum 1 to
Amendment 1 - Electrical installations in ships - Part 359: Sheathing materials for shipboard power and
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
telecommunication cables
IEC 60092-359 Amd.2 Ed. 1.0 b IEC 60092-359 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60092-359 Ed. 1.2 b IEC 60092-359 Ed. 1.2 b:1999 Electrical installations in ships - Part 359: Sheathing
materials for shipboard power and telecommunication cables
IEC 60092-376 Ed. 2.0 en IEC 60092-376 Ed. 2.0 en:2003 Electrical installations in ships - Part 376: Cables for
control and instrumentation circuits 150/250 V (300 V)
IEC 60095-1 Ed. 7.0 b IEC 60095-1 Ed. 7.0 b:2006 Lead-acid starter batteries - Part 1: General requirements
and methods of test
IEC 60095-2 Amd.1 Ed. 3.0 b IEC 60095-2 Amd.1 Ed. 3.0 b:1991 Amendment No. 1
IEC 60095-2 Amd.2 Ed. 3.0 b IEC 60095-2 Amd.2 Ed. 3.0 b:1993 Amendment No. 2
IEC 60095-2 Ed. 3.0 b IEC 60095-2 Ed. 3.0 b:1984 Lead-acid starter batteries. Part 2: Dimensions of batteries
and dimensions and marking of terminals
IEC 60095-4 Ed. 2.0 b IEC 60095-4 Ed. 2.0 b:2008 Lead-acid starter batteries - Part 4: Dimensions of batteries
for heavy vehicles
IEC 60099-1 Amd.1 Ed. 3.0 b IEC 60099-1 Amd.1 Ed. 3.0 b:1999 Amendment 1
IEC 60099-1 Ed. 3.1 b IEC 60099-1 Ed. 3.1 b:1999 Surge arresters - Part 1: Non-linear resistor type gapped
surge arresters for a.c. systems
IEC 60099-4 Amd.1 Ed. 2.0 b IEC 60099-4 Amd.1 Ed. 2.0 b:2006 Amendment 1 - Surge arresters - Part 4:
Metal-oxide surge arresters without gaps for a.c. systems
IEC 60099-4 Amd.2 Ed. 2.0 b IEC 60099-4 Amd.2 Ed. 2.0 b:2009 Amendment 2 - Surge arresters - Part 4:
Metal-oxide surge arresters without gaps for a.c. systems
IEC 60099-4 Ed. 2.2 b IEC 60099-4 Ed. 2.2 b:2009 Surge arresters - Part 4: Metal-oxide surge arresters without
gaps for a.c. systems
IEC 60099-5 Amd.1 Ed. 1.0 b IEC 60099-5 Amd.1 Ed. 1.0 b:1999 Amendment 1
IEC 60099-5 Ed. 1.1 b IEC 60099-5 Ed. 1.1 b:2000 Surge arresters - Part 5: Selection and application
recommendations
IEC 60099-6 Ed. 1.0 en IEC 60099-6 Ed. 1.0 en:2002 Surge arresters - Part 6: Surge arresters containing both
series and parallel gapped structures - Rated 52 kV and less
IEC 60104 Ed. 2.0 b IEC 60104 Ed. 2.0 b:1987 Aluminium-magnesium-silicon alloy wire for overhead line
conductors
IEC 60105 Ed. 1.0 b IEC 60105 Ed. 1.0 b:1958 Recommendation for commercial-purity aluminium busbar
material
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60110-1 Ed. 1.0 b IEC 60110-1 Ed. 1.0 b:1998 Power capacitors for induction heating installations - Part 1:
General
IEC 60114 Ed. 1.0 b IEC 60114 Ed. 1.0 b:1959 Recommendation for heat-treated aluminium alloy busbar
material of the aluminium-magnesium-silicon type
IEC 60114 Ed. 1.0 b Cor.1 IEC 60114 Ed. 1.0 b Cor.1:1959 Corrigendum 1 - Recommendation for heat-treated
aluminium alloy busbar material of the aluminium-magnesium-silicon type
IEC 60119 Ed. 1.0 b IEC 60119 Ed. 1.0 b:1960 Recommendations for polycrystalline semiconductor rectifier
stacks and equipment
IEC 60120 Ed. 3.0 b IEC 60120 Ed. 3.0 b:1984 Dimensions of ball and socket couplings of string insulator
units
IEC 60121 Ed. 1.0 b IEC 60121 Ed. 1.0 b:1960 Recommendation for commercial annealed aluminium electrical
conductor wire
IEC 60127-1 Ed. 2.0 en IEC 60127-1 Ed. 2.0 en:2006 Miniature fuses - Part 1: Definitions for miniature fuses
and general requirements for miniature fuse-links
IEC 60127-10 Ed. 1.0 b IEC 60127-10 Ed. 1.0 b:2001 Miniature fuses - Part 10: User guide for miniature fuses
IEC 60127-2 Amd.1 Ed. 2.0 b IEC 60127-2 Amd.1 Ed. 2.0 b:2003 Amendment 1 - Miniature fuses - Part 2:
Cartridge fuse-links
IEC 60127-2 Ed. 2.1 b IEC 60127-2 Ed. 2.1 b:2003 Miniature fuses - Part 2: Cartridge fuse-links
IEC 60127-3 Amd.1 Ed. 2.0 b IEC 60127-3 Amd.1 Ed. 2.0 b:1991 Amendment No. 1
IEC 60127-3 Amd.1 Ed. 2.0 b Cor.1 IEC 60127-3 Amd.1 Ed. 2.0 b Cor.1:1994 Corrigendum 1 to Amendment 1
- Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60127-3 Amd.1 Ed. 2.0 b Cor.2 IEC 60127-3 Amd.1 Ed. 2.0 b Cor.2:1996 Corrigendum 2 to Amendment 1
- Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60127-3 Amd.2 Ed. 2.0 b IEC 60127-3 Amd.2 Ed. 2.0 b:2002 Amendment 2
IEC 60127-3 Ed. 2.0 b IEC 60127-3 Ed. 2.0 b:1988 Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60127-4 Amd.1 Ed. 3.0 en IEC 60127-4 Amd.1 Ed. 3.0 en:2008 Amendment 1 - Miniature fuses - Part 4:
Universal modular fuse-links (UMF) - Through-hole and surface mount types
IEC 60127-4 Ed. 3.0 b IEC 60127-4 Ed. 3.0 b:2005 Miniature fuses - Part 4: Universal modular fuse-links
(UMF) - Through-hole and surface mount types
IEC 60127-5 Ed. 1.0 b IEC 60127-5 Ed. 1.0 b:1988 Miniature fuses - Part 5: Guidelines for quality assessment
of miniature fuse-links
IEC 60127-6 Amd.1 Ed. 1.0 b IEC 60127-6 Amd.1 Ed. 1.0 b:1996 Amendment No. 1 to IEC 127-6
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60127-6 Amd.2 Ed. 1.0 b IEC 60127-6 Amd.2 Ed. 1.0 b:2002 Amendment 2
IEC 60127-6 Ed. 1.0 b IEC 60127-6 Ed. 1.0 b:1994 Miniature fuses - Part 6: Fuse-holders for miniature
cartridge fuse-links
IEC 60133 Ed. 4.0 b IEC 60133 Ed. 4.0 b:2000 Dimensions of pot-cores made of magnetic oxides and
associated parts
IEC 60136 Amd.1 Ed. 2.0 b IEC 60136 Amd.1 Ed. 2.0 b:1995 Amendment No. 1
IEC 60136 Ed. 2.0 b IEC 60136 Ed. 2.0 b:1986 Dimensions of brushes and brush-holders for electrical
machinery
IEC 60137 Ed. 6.0 b IEC 60137 Ed. 6.0 b:2008 Insulated bushings for alternating voltages above 1 000 V
IEC 60141-1 Amd.1 Ed. 3.0 b IEC 60141-1 Amd.1 Ed. 3.0 b:1995 Amendment No. 1
IEC 60141-1 Amd.2 Ed. 3.0 b IEC 60141-1 Amd.2 Ed. 3.0 b:1998 Amendment 2
IEC 60141-1 Ed. 3.0 b IEC 60141-1 Ed. 3.0 b:1993 Tests on oil-filled and gas-pressure cables and their
accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and
accessories for alternating voltages
IEC 60141-2 Amd.1 Ed. 1.0 b IEC 60141-2 Amd.1 Ed. 1.0 b:1967 Amendment No. 1
IEC 60141-2 Ed. 1.0 b IEC 60141-2 Ed. 1.0 b:1963 Tests on oil-filled and gas-pressure cables and their
accessories. Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
IEC 60141-3 Amd.1 Ed. 1.0 b IEC 60141-3 Amd.1 Ed. 1.0 b:1967 Amendment No. 1
IEC 60141-3 Ed. 1.0 b IEC 60141-3 Ed. 1.0 b:1963 Tests on oil-filled and gas-pressure cables and their
accessories. Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up
to 275 kV
IEC 60141-4 Amd.1 Ed. 1.0 b IEC 60141-4 Amd.1 Ed. 1.0 b:1990 Amendment No. 1
IEC 60141-4 Ed. 1.0 b IEC 60141-4 Ed. 1.0 b:1980 Tests on oil-filled and gas-pressure cables and their
accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for
alternating voltages up to and
IEC 60146-1-1 Ed. 4.0 b IEC 60146-1-1 Ed. 4.0 b:2009 Semiconductor converters - General requirements and
line commutated converters - Part 1-1: Specification of basic requirements
IEC 60146-1-3 Ed. 3.0 b IEC 60146-1-3 Ed. 3.0 b:1991 Semiconductor convertors - General requirements and
line commutated convertors - Part 1-3: Transformers and reactors
IEC 60152 Ed. 1.0 b IEC 60152 Ed. 1.0 b:1963 Identification by hour numbers of the phase conductors of
3-phase electric systems
IEC 60155 Amd.1 Ed. 4.0 b IEC 60155 Amd.1 Ed. 4.0 b:1995 Amendment No. 1
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60155 Amd.2 Ed. 4.0 b IEC 60155 Amd.2 Ed. 4.0 b:2006 Amendment 2 - Glow-starters for fluorescent
lamps
IEC 60155 Ed. 4.0 b IEC 60155 Ed. 4.0 b:1993 Glow-starters for fluorescent lamps
IEC 60167 Ed. 1.0 b IEC 60167 Ed. 1.0 b:1964 Methods of test for the determination of the insulation
resistance of solid insulating materials
IEC 60168 Amd.1 Ed. 4.0 b IEC 60168 Amd.1 Ed. 4.0 b:1997 Amendment No. 1
IEC 60168 Amd.2 Ed. 4.0 b IEC 60168 Amd.2 Ed. 4.0 b:2000 Amendment 2
IEC 60168 Ed. 4.2 b IEC 60168 Ed. 4.2 b:2001 Tests on indoor and outdoor post insulators of ceramic material
or glass for systems with nominal voltages greater than 1000 V
IEC 60172 Amd.1 Ed. 3.0 b IEC 60172 Amd.1 Ed. 3.0 b:1997 Amendment No. 1
IEC 60172 Ed. 3.0 b IEC 60172 Ed. 3.0 b:1987 Test procedure for the determination of the temperature index of
enamelled winding wires
IEC 60173 Ed. 1.0 b IEC 60173 Ed. 1.0 b:1964 Colours of the cores of flexible cables and cords
IEC 60183 Amd.1 Ed. 2.0 b IEC 60183 Amd.1 Ed. 2.0 b:1990 Amendment No. 1
IEC 60183 Ed. 2.0 b IEC 60183 Ed. 2.0 b:1984 Guide to the selection of high-voltage cables
IEC 60188 Ed. 3.0 b IEC 60188 Ed. 3.0 b:2001 High-pressure mercury vapour lamps - Performance
specifications
IEC 60189-1 Ed. 3.0 en IEC 60189-1 Ed. 3.0 en:2007 Low-frequency cables and wires with PVC insulation and
PVC sheath - Part 1: General test and measuring methods
IEC 60189-2 Ed. 4.0 en IEC 60189-2 Ed. 4.0 en:2007 Low-frequency cables and wires with PVC insulation and
PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
IEC 60189-3 Ed. 4.0 en IEC 60189-3 Ed. 4.0 en:2007 Low-frequency cables and wires with PVC insulation and
PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs
and triples
IEC 60192 Ed. 3.0 b IEC 60192 Ed. 3.0 b:2001 Low-pressure sodium vapour lamps - Performance
specifications
IEC 60196 Ed. 2.0 b IEC 60196 Ed. 2.0 b:2009 IEC standard frequencies
IEC 60197 Ed. 1.0 b IEC 60197 Ed. 1.0 b:1965 High-voltage connecting wire with flame retarding insulation
for use in television receivers
IEC 60204-1 Amd.1 Ed. 5.0 b IEC 60204-1 Amd.1 Ed. 5.0 b:2008 Amendment 1 - Safety of machinery -
Electrical equipment of machines - Part 1: General requirements
IEC 60204-1 Ed. 5.1 b IEC 60204-1 Ed. 5.1 b:2009 Safety of machinery - Electrical equipment of machines -
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
protective function
IEC 60230 Ed. 1.0 b IEC 60230 Ed. 1.0 b:1966 Impulse tests on cables and their accessories
IEC 60238 Amd.1 Ed. 8.0 b IEC 60238 Amd.1 Ed. 8.0 b:2008 Amendment 1 - Edison screw lampholders
IEC 60238 Ed. 8.1 b IEC 60238 Ed. 8.1 b:2008 Edison screw lampholders
IEC 60245-1 Ed. 4.1 b IEC 60245-1 Ed. 4.1 b:2008 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 1: General requirements
IEC 60245-2 Amd.1 Ed. 2.0 b IEC 60245-2 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60245-2 Amd.2 Ed. 2.0 b IEC 60245-2 Amd.2 Ed. 2.0 b:1997 Amendment No. 2
IEC 60245-2 Ed. 2.2 b IEC 60245-2 Ed. 2.2 b:1998 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 2: Test methods
IEC 60245-3 Amd.1 Ed. 2.0 b IEC 60245-3 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60245-3 Ed. 2.0 b IEC 60245-3 Ed. 2.0 b:1994 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC 60245-4 Amd.1 Ed. 2.0 b IEC 60245-4 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60245-4 Amd.2 Ed. 2.0 b IEC 60245-4 Amd.2 Ed. 2.0 b:2003 Amendment 2 - Rubber insulated cables -
Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60245-4 Ed. 2.2 b IEC 60245-4 Ed. 2.2 b:2004 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 4: Cords and flexible cables
IEC 60245-5 Amd.1 Ed. 2.0 b IEC 60245-5 Amd.1 Ed. 2.0 b:2003 Amendment 1 - Rubber insulated cables -
Rated voltages up to and including 450/750 V - Part 5: Lift cables
IEC 60245-5 Ed. 2.0 b IEC 60245-5 Ed. 2.0 b:1994 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 5: Lift cables
IEC 60245-6 Amd.1 Ed. 2.0 b IEC 60245-6 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60245-6 Amd.2 Ed. 2.0 b IEC 60245-6 Amd.2 Ed. 2.0 b:2003 Amendment 2 - Rubber insulated cables -
Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC 60245-6 Ed. 2.0 b IEC 60245-6 Ed. 2.0 b:1994 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 6: Arc welding electrode cables
IEC 60245-7 Amd.1 Ed. 1.0 b IEC 60245-7 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60245-7 Ed. 1.0 b IEC 60245-7 Ed. 1.0 b:1994 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-8 Amd.1 Ed. 1.0 b IEC 60245-8 Amd.1 Ed. 1.0 b:2003 Amendment 1 - Rubber insulated cables -
Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60245-8 Ed. 1.1 b IEC 60245-8 Ed. 1.1 b:2004 Rubber insulated cables - Rated voltages up to and
including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC 60246 Ed. 1.0 b IEC 60246 Ed. 1.0 b:1967 Connecting wires having a rated voltage of 20 kV and 25 kV
d.c. and a maximum working temperature of 105 YC for use in television receivers
IEC 60254-1 Ed. 4.0 b IEC 60254-1 Ed. 4.0 b:2005 Lead-acid traction batteries - Part 1: General requirements
and methods of tests
IEC 60254-2 Ed. 4.0 b IEC 60254-2 Ed. 4.0 b:2008 Lead-acid traction batteries - Part 2: Dimensions of cells
and terminals and marking of polarity on cells
IEC 60255-1 Ed. 1.0 b IEC 60255-1 Ed. 1.0 b:2009 Measuring relays and protection equipment - Part 1:
Common requirements
IEC 60255-11 Ed. 2.0 b IEC 60255-11 Ed. 2.0 b:2008 Measuring relays and protection equipment - Part 11:
Voltage dips, short interruptions, variations and ripple on auxiliary power supply port
IEC 60255-12 Ed. 1.0 b IEC 60255-12 Ed. 1.0 b:1980 Electrical relays - Part 12: Directional relays and power
relays with two input energizing quantities
IEC 60255-13 Ed. 1.0 b IEC 60255-13 Ed. 1.0 b:1980 Electrical relays - Part 13: Biased (percentage)
differential relays
IEC 60255-151 Ed. 1.0 b IEC 60255-151 Ed. 1.0 b:2009 Measuring relays and protection equipment - Part 151:
Functional requirements for over/under current protection
IEC 60255-16 Ed. 1.0 b IEC 60255-16 Ed. 1.0 b:1982 Electrical relays - Part 16: Impedance measuring relays
IEC 60255-21-1 Ed. 1.0 b IEC 60255-21-1 Ed. 1.0 b:1988 Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)
IEC 60255-21-2 Ed. 1.0 b IEC 60255-21-2 Ed. 1.0 b:1988 Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests
IEC 60255-21-3 Ed. 1.0 b IEC 60255-21-3 Ed. 1.0 b:1993 Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
IEC 60255-22-1 Ed. 3.0 b IEC 60255-22-1 Ed. 3.0 b:2007 Measuring relays and protection equipment - Part
22-1: Electrical disturbance tests - 1 MHz burst immunity tests
IEC 60255-22-2 Ed. 3.0 b IEC 60255-22-2 Ed. 3.0 b:2008 Measuring relays and protection equipment - Part
22-2: Electrical disturbance tests - Electrostatic discharge tests
IEC 60255-22-3 Ed. 3.0 b IEC 60255-22-3 Ed. 3.0 b:2007 Measuring relays and protection equipment - Part
22-3: Electrical disturbance tests - Radiated electromagnetic field immunity
IEC 60255-22-4 Ed. 3.0 b IEC 60255-22-4 Ed. 3.0 b:2008 Measuring relays and protection equipment - Part
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular
copper wire
IEC 60317-0-5 Ed. 2.0 b IEC 60317-0-5 Ed. 2.0 b:2006 Specifications for particular types of winding wires -
Part 0-5: General requirements - Glass-fibre braided, resin or varnish impregnated, bare or enamelled
rectangular copper wire
IEC 60317-0-6 Amd.1 Ed. 1.0 b IEC 60317-0-6 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Specifications for
particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish
impregnated, bare or enamelled round copper wire
IEC 60317-0-6 Ed. 1.1 b IEC 60317-0-6 Ed. 1.1 b:2007 Specifications for particular types of winding wires -
Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round
copper wire
IEC 60317-1 Amd.1 Ed. 3.0 b IEC 60317-1 Amd.1 Ed. 3.0 b:1997 Amendment No. 1
IEC 60317-1 Amd.2 Ed. 3.0 b IEC 60317-1 Amd.2 Ed. 3.0 b:1997 Amendment No. 2
IEC 60317-1 Ed. 3.2 b IEC 60317-1 Ed. 3.2 b:1997 Specifications for particular types of winding wires - Part 1:
Polyvinyl acetal enamelled round copper wire, class 105
IEC 60317-11 Amd.1 Ed. 3.0 b IEC 60317-11 Amd.1 Ed. 3.0 b:2005 Amendment 1 - Specifications for
particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires,
class 130, with silk covering
IEC 60317-11 Ed. 3.1 b IEC 60317-11 Ed. 3.1 b:2005 Specifications for particular types of winding wires - Part
11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering
IEC 60317-12 Amd.1 Ed. 2.0 b IEC 60317-12 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-12 Amd.2 Ed. 2.0 b IEC 60317-12 Amd.2 Ed. 2.0 b:2005 Amendment 2 - Specifications for
particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 60317-12 Ed. 2.0 b IEC 60317-12 Ed. 2.0 b:1990 Specifications for particular types of winding wires. Part
12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 60317-13 Amd.1 Ed. 2.0 b IEC 60317-13 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-13 Amd.2 Ed. 2.0 b IEC 60317-13 Amd.2 Ed. 2.0 b:1997 Amendment No. 2
IEC 60317-13 Ed. 2.2 b IEC 60317-13 Ed. 2.2 b:1997 Specifications for particular types of winding wires - Part
13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
IEC 60317-15 Ed. 3.0 b IEC 60317-15 Ed. 3.0 b:2004 Specifications for particular types of winding wires - Part
15: Polyesterimide enamelled round aluminium wire, class 180
IEC 60317-16 Amd.1 Ed. 2.0 b IEC 60317-16 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60317-16 Amd.2 Ed. 2.0 b IEC 60317-16 Amd.2 Ed. 2.0 b:2009 Amendment 2 - Specifications for
particular types of winding wires - Part 16: Polyester enamelled rectangular copper wire, class 155
IEC 60317-16 Ed. 2.0 b IEC 60317-16 Ed. 2.0 b:1990 Specifications for particular types of winding wires. Part
16: Polyester enamelled rectangular copper wire, class 155
IEC 60317-17 Amd.1 Ed. 2.0 b IEC 60317-17 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-17 Amd.2 Ed. 2.0 b IEC 60317-17 Amd.2 Ed. 2.0 b:2005 Amendment 2 - Specifications for
particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
IEC 60317-17 Ed. 2.0 b IEC 60317-17 Ed. 2.0 b:1990 Specifications for particular types of winding wires - Part
17: Polyvinyl acetal enamelled rectangular copper wire, class 105
IEC 60317-18 Ed. 3.0 b IEC 60317-18 Ed. 3.0 b:2004 Specifications for particular types of winding wires - Part
18: Polyvinyl acetal enamelled rectangular copper wire, class 120
IEC 60317-19 Amd.1 Ed. 2.0 b IEC 60317-19 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-19 Amd.2 Ed. 2.0 b IEC 60317-19 Amd.2 Ed. 2.0 b:1999 Amendment 2
IEC 60317-19 Ed. 2.2 b IEC 60317-19 Ed. 2.2 b:2000 Specifications for particular types of winding wires - Part
19: Solderable polyurethane enamelled round copper wire, overcoated with polyamide, class 130
IEC 60317-2 Amd.1 Ed. 3.0 b IEC 60317-2 Amd.1 Ed. 3.0 b:1997 Amendment No. 1
IEC 60317-2 Amd.2 Ed. 3.0 b IEC 60317-2 Amd.2 Ed. 3.0 b:1999 Amendment 2
IEC 60317-2 Ed. 3.2 b IEC 60317-2 Ed. 3.2 b:2000 Specifications for particular types of winding wires - Part 2:
Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (TITLE TRUNCATED)
IEC 60317-20 Amd.1 Ed. 2.0 b IEC 60317-20 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-20 Amd.2 Ed. 2.0 b IEC 60317-20 Amd.2 Ed. 2.0 b:1999 Amendment 2
IEC 60317-20 Ed. 2.2 b IEC 60317-20 Ed. 2.2 b:2000 Specifications for particular types of winding wires - Part
20: Solderable polyurethane enamelled round copper wire, class 155
IEC 60317-21 Amd.1 Ed. 2.0 b IEC 60317-21 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60317-21 Amd.2 Ed. 2.0 b IEC 60317-21 Amd.2 Ed. 2.0 b:1999 Amendment 2
IEC 60317-21 Ed. 2.2 b IEC 60317-21 Ed. 2.2 b:2000 Specifications for particular types of winding wires - Part
21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
IEC 60317-22 Ed. 3.0 b IEC 60317-22 Ed. 3.0 b:2004 Specifications for particular types of winding wires - Part
22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
IEC 60317-23 Amd.1 Ed. 2.0 b IEC 60317-23 Amd.1 Ed. 2.0 b:1997 Amendment No.1
IEC 60317-23 Amd.2 Ed. 2.0 b IEC 60317-23 Amd.2 Ed. 2.0 b:1999 Amendment 2
IEC 60317-23 Ed. 2.2 b IEC 60317-23 Ed. 2.2 b:2000 Specifications for particular types of winding wires - Part
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60317-32 Ed. 1.1 b IEC 60317-32 Ed. 1.1 b:1997 Specifications for particular types of winding wires - Part
32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature
index 155
IEC 60317-33 Amd.1 Ed. 1.0 b IEC 60317-33 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-33 Amd.2 Ed. 1.0 b IEC 60317-33 Amd.2 Ed. 1.0 b:2005 Amendment 2 - Specifications for
particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled
rectangular copper wire, temperature index 200
IEC 60317-33 Ed. 1.1 b IEC 60317-33 Ed. 1.1 b:1997 Specifications for particular types of winding wires - Part
33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature
index 200
IEC 60317-34 Ed. 2.0 b IEC 60317-34 Ed. 2.0 b:1997 Specifications for particular types of winding wires - Part
34: Polyester enamelled round copper wire, class 130L
IEC 60317-35 Amd.1 Ed. 1.0 b IEC 60317-35 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-35 Amd.2 Ed. 1.0 b IEC 60317-35 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60317-35 Ed. 1.2 b IEC 60317-35 Ed. 1.2 b:2000 Specifications for particular types of winding wires - Part
35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
IEC 60317-36 Amd.1 Ed. 1.0 b IEC 60317-36 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-36 Amd.2 Ed. 1.0 b IEC 60317-36 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60317-36 Ed. 1.2 b IEC 60317-36 Ed. 1.2 b:2000 Specifications for particular types of winding wires - Part
36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer (TITLE
TRUNCATED)
IEC 60317-37 Amd.1 Ed. 1.0 b IEC 60317-37 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-37 Amd.2 Ed. 1.0 b IEC 60317-37 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60317-37 Ed. 1.2 b IEC 60317-37 Ed. 1.2 b:2000 Specifications for particular types of winding wires - Part
37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
IEC 60317-38 Amd.1 Ed. 1.0 b IEC 60317-38 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-38 Amd.2 Ed. 1.0 b IEC 60317-38 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60317-38 Ed. 1.2 b IEC 60317-38 Ed. 1.2 b:2000 Specifications for particular types of winding wires - Part
38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with
a bonding layer
IEC 60317-39 Amd.1 Ed. 1.0 b IEC 60317-39 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-39 Amd.2 Ed. 1.0 b IEC 60317-39 Amd.2 Ed. 1.0 b:2005 Amendment 2 - Specifications for
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled
rectangular copper wire, temperature index 180
IEC 60317-39 Ed. 1.0 b IEC 60317-39 Ed. 1.0 b:1992 Specifications for particular types of winding wires - Part
39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature
index 180
IEC 60317-4 Amd.1 Ed. 3.0 b IEC 60317-4 Amd.1 Ed. 3.0 b:1997 Amendment No. 1
IEC 60317-4 Amd.2 Ed. 3.0 b IEC 60317-4 Amd.2 Ed. 3.0 b:1999 Amendment 2
IEC 60317-4 Ed. 3.2 b IEC 60317-4 Ed. 3.2 b:2000 Specifications for particular types of winding wires - Part 4:
Solderable polyurethane enamelled round copper wire, class 130
IEC 60317-40 Amd.1 Ed. 1.0 b IEC 60317-40 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60317-40 Amd.2 Ed. 1.0 b IEC 60317-40 Amd.2 Ed. 1.0 b:2005 Amendment 2 - Specifications for
particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled
rectangular copper wire, temperature index 200
IEC 60317-40 Ed. 1.0 b IEC 60317-40 Ed. 1.0 b:1992 Specifications for particular types of winding wires - Part
40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature
index 200
IEC 60317-42 Ed. 1.0 b IEC 60317-42 Ed. 1.0 b:1997 Specifications for particular types of winding wires - Part
42: Polyester-amide-imide enamelled round copper wire, class 200
IEC 60317-43 Ed. 1.0 b IEC 60317-43 Ed. 1.0 b:1997 Specifications for particular types of winding wires - Part
43: Aromatic polyimide tape wrapped round copper wire, class 240
IEC 60317-44 Ed. 1.0 b IEC 60317-44 Ed. 1.0 b:1997 Specifications for particular types of winding wires - Part
44: Aromatic polyimide tape wrapped rectangular copper wire, class 240
IEC 60317-46 Ed. 1.0 b IEC 60317-46 Ed. 1.0 b:1997 Specifications for particular types of winding wires - Part
46: Aromatic polyimide enamelled round copper wires, class 240
IEC 60317-47 Ed. 1.0 b IEC 60317-47 Ed. 1.0 b:1997 Specifications for particular types of winding wires - Part
47: Aromatic polyimide enamelled rectangular copper wire, class 240
IEC 60317-48 Ed. 1.0 b IEC 60317-48 Ed. 1.0 b:1999 Specifications for particular types of winding wires - Part
48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index
155
IEC 60317-49 Ed. 1.0 b IEC 60317-49 Ed. 1.0 b:1999 Specifications for particular types of winding wires - Part
49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index
180
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60317-50 Ed. 1.0 b IEC 60317-50 Ed. 1.0 b:1999 Specifications for particular types of winding wires - Part
50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index
200
IEC 60317-51 Ed. 1.0 b IEC 60317-51 Ed. 1.0 b:2001 Specifications for particular types of winding wires - Part
51: Solderable polyurethane enamelled round copper wire, class 180
IEC 60317-52 Ed. 1.0 b IEC 60317-52 Ed. 1.0 b:1999 Specifications for particular types of winding wires - Part
52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
IEC 60317-53 Ed. 1.0 b IEC 60317-53 Ed. 1.0 b:1999 Specifications for particular types of winding wires - Part
53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
IEC 60317-54 Ed. 1.0 b IEC 60317-54 Ed. 1.0 b:2001 Specifications for particular types of winding wires - Part
54: Polyester enamelled round copper wire, class 155L
IEC 60317-55 Ed. 1.0 b IEC 60317-55 Ed. 1.0 b:2007 Specifications for particular types of winding wires - Part
55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180
IEC 60317-8 Amd.1 Ed. 3.0 b IEC 60317-8 Amd.1 Ed. 3.0 b:1997 Amendment No. 1
IEC 60317-8 Amd.2 Ed. 3.0 b IEC 60317-8 Amd.2 Ed. 3.0 b:1997 Amendment No. 2
IEC 60317-8 Ed. 3.2 b IEC 60317-8 Ed. 3.2 b:1997 Specifications for particular types of winding wires - Part 8:
Polyesterimide enamelled round copper wire, class 180
IEC 60320-1 Amd.1 Ed. 2.0 b IEC 60320-1 Amd.1 Ed. 2.0 b:2007 Amendment 1 - Appliances couplers for
household and similar general purposes - Part 1: General requirements
IEC 60320-1 Ed. 2.1 b IEC 60320-1 Ed. 2.1 b:2007 Appliance couplers for household and similar general
purposes - Part 1: General requirements
IEC 60320-2-1 Ed. 2.0 b IEC 60320-2-1 Ed. 2.0 b:2000 Appliance couplers for household and similar general
purposes - Part 2-1: Sewing machine couplers
IEC 60320-2-2 Ed. 2.0 b IEC 60320-2-2 Ed. 2.0 b:1998 Appliance couplers for household and similar general
purposes - Part 2-2: Interconnection couplers for household and similar equipment
IEC 60320-2-3 Amd.1 Ed. 1.0 b IEC 60320-2-3 Amd.1 Ed. 1.0 b:2004 Amendment 1 - Appliance coupler for
household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than
IPX0
IEC 60320-2-3 Ed. 1.1 b IEC 60320-2-3 Ed. 1.1 b:2005 Appliance couplers for household and similar general
purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
IEC 60320-2-4 Ed. 1.0 b IEC 60320-2-4 Ed. 1.0 b:2005 Appliance couplers for household and similar general
purposes - Part 2-4: Couplers dependent on appliance weight for engagement
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60322 Ed. 2.0 b IEC 60322 Ed. 2.0 b:2001 Railway applications - Electric equipment for rolling stock -
Rules for power resistors of open construction
IEC 60329 Ed. 2.0 b IEC 60329 Ed. 2.0 b:1984 Strip-wound cut cores of grain oriented silicon-iron alloy, used
for electronic and telecommunication equipment
IEC 60331-1 Ed. 1.0 b IEC 60331-1 Ed. 1.0 b:2009 Tests for electric cables under fire conditions - Circuit
integrity - Part 1: Test method for fire with shock at a temperature of at least 830 YC for cables of rated voltage
up to and including 0,6/1
IEC 60331-11 Amd.1 Ed. 1.0 b IEC 60331-11 Amd.1 Ed. 1.0 b:2009 Amendment 1 - Tests for electric cables
under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750
YC
IEC 60331-2 Ed. 1.0 b IEC 60331-2 Ed. 1.0 b:2009 Tests for electric cables under fire conditions - Circuit
integrity - Part 2: Test method for fire with shock at a temperature of at least 830 YC for cables of rated voltage
up to and including 0,6/1
IEC 60331-3 Ed. 1.0 b IEC 60331-3 Ed. 1.0 b:2009 Tests for electric cables under fire conditions - Circuit
integrity - Part 3: Test method for fire with shock at a temperature of at least 830 YC for cables of rated voltage
up to and including 0,6/1
IEC 60332-3-10 Amd.1 Ed. 1.0 b IEC 60332-3-10 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Tests on electric and
optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted
bunched wires or cables - Apparatus
IEC 60332-3-22 Amd.1 Ed. 1.0 b IEC 60332-3-22 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Tests on electric and
optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted
bunched wires or cables - Category A
IEC 60332-3-23 Amd.1 Ed. 1.0 b IEC 60332-3-23 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Tests on electric and
optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted
bunched wires or cables - Category B
IEC 60332-3-24 Amd.1 Ed. 1.0 b IEC 60332-3-24 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Tests on electric and
optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted
bunched wires or cables - Category C
IEC 60332-3-25 Amd.1 Ed. 1.0 b IEC 60332-3-25 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Tests on electric and
optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted
bunched wires or cables - Category D
IEC 60335-2-29 Amd.1 Ed. 4.0 b Cor.1 IEC 60335-2-29 Amd.1 Ed. 4.0 b Cor.1:2004 Corrigendum 1 -
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for
battery chargers
IEC 60335-2-29 Ed. 4.1 b IEC 60335-2-29 Ed. 4.1 b:2004 Household and similar electrical appliances - Safety -
Part 2-29: Particular requirements for battery chargers
IEC 60335-2-97 Amd.2 Ed. 2.0 b IEC 60335-2-97 Amd.2 Ed. 2.0 b:2008 Amendment 2 - Household and similar
electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds
and similar equipment
IEC 60335-2-97 Ed. 2.2 b IEC 60335-2-97 Ed. 2.2 b:2009 Household and similar electrical appliances - Safety -
Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
IEC 60349-1 Amd.1 Ed. 1.0 b IEC 60349-1 Amd.1 Ed. 1.0 b:2002 Amendment 1
IEC 60349-1 Ed. 1.1 b IEC 60349-1 Ed. 1.1 b:2002 Electric traction - Rotating electrical machines for rail and
road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors
IEC 60349-2 Ed. 2.0 b IEC 60349-2 Ed. 2.0 b:2002 Electric traction - Rotating electrical machines for rail and
road vehicles - Part 2: Electronic convertor-fed alternating current motors
IEC 60352-1 Ed. 3.0 b IEC 60352-1 Ed. 3.0 b:1997 Solderless connections - Part 1: Wrapped connections -
General requirements, test methods and practical guidance
IEC 60352-3 Ed. 1.0 b IEC 60352-3 Ed. 1.0 b:1993 Solderless connections - Part 3: Solderless accessible
insulation displacement connections - General requirements, test methods and practical guidance
IEC 60352-3 Ed. 1.0 b Cor.1 IEC 60352-3 Ed. 1.0 b Cor.1:1995 Solderless connections - Part 3: Solderless
accessible insulation displacement connections - General requirements, test methods and practical guidance
IEC 60352-4 Amd.1 Ed. 1.0 b IEC 60352-4 Amd.1 Ed. 1.0 b:2000 Amendment 1
IEC 60352-4 Ed. 1.0 b IEC 60352-4 Ed. 1.0 b:1994 Solderless connections - Part 4: Solderless non-accessible
insulation displacement connections - General requirements, test methods and practical guidance
IEC 60352-6 Ed. 1.0 b IEC 60352-6 Ed. 1.0 b:1997 Solderless connections - Part 6: Insulation piercing
connections - General requirements, test methods and practical guidance
IEC 60353 Ed. 2.0 b IEC 60353 Ed. 2.0 b:1989 Line traps for a.c. power systems
IEC 60356 Ed. 1.0 b IEC 60356 Ed. 1.0 b:1971 Dimensions for commutators and slip-rings
IEC 60357 Amd.1 Ed. 3.0 b IEC 60357 Amd.1 Ed. 3.0 b:2006 Amendment 1 - Tungsten halogen lamps
(non-vehicle) - Performance specifications
IEC 60357 Amd.2 Ed. 3.0 b IEC 60357 Amd.2 Ed. 3.0 b:2008 Amendment 2 - Tungsten halogen lamps
(non-vehicle) - Performance specifications
IEC 60357 Ed. 3.0 b IEC 60357 Ed. 3.0 b:2002 Tungsten halogen lamps (non vehicle) - Performance
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
specifications
IEC 60358 Ed. 2.0 b IEC 60358 Ed. 2.0 b:1990 Coupling capacitors and capacitor dividers
IEC 60360 Ed. 3.0 b IEC 60360 Ed. 3.0 b:1998 Standard method of measurement of lamp cap temperature rise
IEC 60364-5-53 Amd.1 Ed. 3.0 b IEC 60364-5-53 Amd.1 Ed. 3.0 b:2002 Amendment 1
IEC 60364-5-53 Ed. 3.1 b IEC 60364-5-53 Ed. 3.1 b:2002 Electrical installations of buildings - Part 5-53:
Selection and erection of electrical equipment - Isolation, switching and control
IEC 60364-5-55 Amd.1 Ed. 1.0 b IEC 60364-5-55 Amd.1 Ed. 1.0 b:2001 Amendment 1
IEC 60364-7-710 Ed. 1.0 b IEC 60364-7-710 Ed. 1.0 b:2002 Electrical installations of buildings - Part 7-710:
Requirements for special installations or locations - Medical locations
IEC 60364-7-711 Ed. 1.0 b IEC 60364-7-711 Ed. 1.0 b:1998 Electrical installations of buildings - Part 7-711:
Requirements for special installations or locations - Exhibitions, shows and stands
IEC 60364-7-715 Ed. 1.0 b IEC 60364-7-715 Ed. 1.0 b:1999 Electrical installations of buildings - Part 7-715:
Requirements for special installations or locations - Extra-low-voltage lighting installations
IEC 60364-7-717 Ed. 2.0 b IEC 60364-7-717 Ed. 2.0 b:2009 Low-voltage electrical installations - Part 7-717:
Requirements for special installations or locations - Mobile or transportable units
IEC 60371-1 Ed. 3.0 b IEC 60371-1 Ed. 3.0 b:2003 Specification for insulating materials based on mica - Part 1:
Definitions and general requirements
IEC 60371-3-1 Ed. 3.0 en IEC 60371-3-1 Ed. 3.0 en:2006 Specification for insulating materials based on mica -
Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
IEC 60371-3-2 Ed. 2.0 en IEC 60371-3-2 Ed. 2.0 en:2005 Insulating materials based on mica - Part 3:
Specifications for individual materials - Sheet 2: Mica paper
IEC 60371-3-3 Ed. 1.0 b IEC 60371-3-3 Ed. 1.0 b:1983 Specification for insulating materials based on mica.
Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment
IEC 60371-3-4 Amd.1 Ed. 1.0 en IEC 60371-3-4 Amd.1 Ed. 1.0 en:2006 Amendment 1 - Specification for
insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester
film-backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-4 Ed. 1.0 b IEC 60371-3-4 Ed. 1.0 b:1992 Specification for insulating materials based on mica -
Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy
resin binder
IEC 60371-3-5 Ed. 2.0 en IEC 60371-3-5 Ed. 2.0 en:2005 Insulating materials based on mica - Part 3:
Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for
post-impregnation (VPI)
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60371-3-6 Amd.1 Ed. 1.0 en IEC 60371-3-6 Amd.1 Ed. 1.0 en:2006 Amendment 1 - Specification of
insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica
paper with a B-stage epoxy resin binder
IEC 60371-3-6 Ed. 1.0 b IEC 60371-3-6 Ed. 1.0 b:1992 Specification for insulating materials based on mica -
Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin
binder
IEC 60371-3-7 Amd.1 Ed. 1.0 en IEC 60371-3-7 Amd.1 Ed. 1.0 en:2006 Amendment 1 - Insulating materials
based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an
epoxy resin binder for single conductor taping
IEC 60371-3-7 Ed. 1.0 b IEC 60371-3-7 Ed. 1.0 b:1995 Insulating materials based on mica - Part 3:
Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single
conductor taping
IEC 60371-3-7 Ed. 1.0 b Cor.1 IEC 60371-3-7 Ed. 1.0 b Cor.1:1995 Corrigendum 1 - Insulating materials based
on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin
binder for single conductor taping
IEC 60371-3-8 Amd.1 Ed. 1.0 en IEC 60371-3-8 Amd.1 Ed. 1.0 en:2007 Amendment 1 - Insulating materials
based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant
security cables
IEC 60371-3-8 Ed. 1.0 b IEC 60371-3-8 Ed. 1.0 b:1995 Insulating materials based on mica - Part 3:
Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
IEC 60371-3-8 Ed. 1.0 b Cor.1 IEC 60371-3-8 Ed. 1.0 b Cor.1:1995 Corrigendum 1 - Insulating materials based
on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security
cables
IEC 60371-3-9 Amd.1 Ed. 1.0 en IEC 60371-3-9 Amd.1 Ed. 1.0 en:2007 Amendment 1 - Insulating materials
based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
IEC 60371-3-9 Ed. 1.0 b IEC 60371-3-9 Ed. 1.0 b:1995 Insulating materials based on mica - Part 3:
Specifications for individual materials - Sheet 9: Moulding micanite
IEC 60371-3-9 Ed. 1.0 b Cor.1 IEC 60371-3-9 Ed. 1.0 b Cor.1:1995 Corrigendum 1 - Insulating materials based
on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
IEC 60372 Amd.1 Ed. 3.0 b IEC 60372 Amd.1 Ed. 3.0 b:1991 Amendment No. 1
IEC 60372 Amd.2 Ed. 3.0 b IEC 60372 Amd.2 Ed. 3.0 b:2003 Amendment 2
IEC 60372 Ed. 3.0 b IEC 60372 Ed. 3.0 b:1984 Locking devices for ball and socket couplings of string insulator
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60404-8-6 Amd.1 Ed. 2.0 b IEC 60404-8-6 Amd.1 Ed. 2.0 b:2007 Amendment 1 - Magnetic materials -
Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 60404-8-6 Ed. 2.1 b IEC 60404-8-6 Ed. 2.1 b:2007 Magnetic materials - Part 8-6: Specifications for
individual materials - Soft magnetic metallic materials
IEC 60404-8-7 Ed. 3.0 b IEC 60404-8-7 Ed. 3.0 b:2008 Magnetic materials - Part 8-7: Specifications for
individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed
state
IEC 60404-8-8 Ed. 1.0 b IEC 60404-8-8 Ed. 1.0 b:1991 Magnetic materials - Part 8: Specifications for
individual materials - Section 8: Specification for thin magnetic steel strip for use at medium frequencies
IEC 60404-8-9 Ed. 1.0 b IEC 60404-8-9 Ed. 1.0 b:1994 Magnetic materials - Part 8: Specifications for
individual materials - Section 9: Standard specification for sintered soft magnetic materials
IEC 60404-9 Ed. 1.0 b IEC 60404-9 Ed. 1.0 b:1987 Magnetic materials. Part 9: Methods of determination of the
geometrical characteristics of magnetic steel sheet and strip
IEC 60413 Ed. 1.0 b IEC 60413 Ed. 1.0 b:1972 Test procedures for determining physical properties of brush
materials for electrical machines
IEC 60422 Ed. 3.0 b IEC 60422 Ed. 3.0 b:2005 Mineral insulating oils in electrical equipment - Supervision
and maintenance guidance
IEC 60423 Ed. 3.0 b IEC 60423 Ed. 3.0 b:2007 Conduit systems for cable management - Outside diameters of
conduits for electrical installations and threads for conduits and fittings
IEC 60424-1 Ed. 1.0 b IEC 60424-1 Ed. 1.0 b:1999 Ferrite cores - Guide on the limits of surface irregularities -
Part 1: General specification
IEC 60424-2 Ed. 1.0 b IEC 60424-2 Ed. 1.0 b:1997 Guidance of the limits of surface irregularities of ferrite
cores - Part 2: RM-cores
IEC 60424-3 Ed. 1.0 b IEC 60424-3 Ed. 1.0 b:1999 Ferrite cores - Guide on the limits of surface irregularities -
Part 3: ETD-cores and E-cores
IEC 60424-4 Ed. 1.0 b IEC 60424-4 Ed. 1.0 b:2001 Ferrite cores - Guide on the limits of surface irregularities -
Part 4: Ring-cores
IEC 60424-5 Ed. 1.0 b IEC 60424-5 Ed. 1.0 b:2009 Ferrite cores - Guide on the limits of surface irregularities -
Part 5: Planar-cores
IEC 60432-1 Amd.1 Ed. 2.0 b IEC 60432-1 Amd.1 Ed. 2.0 b:2005 Amendment 1 - Incandescent lamps - Safety
specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1 Ed. 2.1 b IEC 60432-1 Ed. 2.1 b:2005 Incandescent lamps - Safety specifications - Part 1:
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-2 Amd.1 Ed. 2.0 b IEC 60432-2 Amd.1 Ed. 2.0 b:2005 Amendment 1 - Incandescent lamps - Safety
specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes
IEC 60432-2 Ed. 2.1 b IEC 60432-2 Ed. 2.1 b:2005 Incandescent lamps - Safety specifications - Part 2:
Tungsten-halogen lamps for domestic and similar general lighting purposes
IEC 60432-3 Amd.1 Ed. 1.0 b IEC 60432-3 Amd.1 Ed. 1.0 b:2005 Amendment 1 - Incandescent lamps - Safety
specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
IEC 60432-3 Amd.2 Ed. 1.0 b IEC 60432-3 Amd.2 Ed. 1.0 b:2008 Amendment 2 - Incandescent lamps - Safety
specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
IEC 60432-3 Ed. 1.2 b IEC 60432-3 Ed. 1.2 b:2008 Incandescent lamps - Safety specifications - Part 3:
Tungsten-halogen lamps (non-vehicle)
IEC 60433 Ed. 3.0 b IEC 60433 Ed. 3.0 b:1998 Insulators for overhead lines with a nominal voltage above 1
000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
IEC 60434 Amd.1 Ed. 1.0 b IEC 60434 Amd.1 Ed. 1.0 b:1981 Amendment No. 1
IEC 60434 Amd.2 Ed. 1.0 b IEC 60434 Amd.2 Ed. 1.0 b:1984 Amendment No. 2
IEC 60434 Ed. 1.0 b IEC 60434 Ed. 1.0 b:1973 Aircraft electrical filament lamps
IEC 60437 Ed. 2.0 b IEC 60437 Ed. 2.0 b:1997 Radio interference test on high-voltage insulators
IEC 60439-2 Amd.1 Ed. 3.0 b IEC 60439-2 Amd.1 Ed. 3.0 b:2005 Amendment 1 - Low-voltage switchgear and
controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
IEC 60439-2 Ed. 3.1 b IEC 60439-2 Ed. 3.1 b:2005 Low-voltage switchgear and controlgear assemblies - Part 2:
Particular requirements for busbar trunking systems (busways)
IEC 60439-3 Amd.1 Ed. 1.0 b IEC 60439-3 Amd.1 Ed. 1.0 b:1993 Amendment No. 1
IEC 60439-3 Amd.2 Ed. 1.0 b IEC 60439-3 Amd.2 Ed. 1.0 b:2001 Amendment 2
IEC 60439-3 Ed. 1.2 b IEC 60439-3 Ed. 1.2 b:2001 Low-voltage switchgear and controlgear assemblies - Part 3:
Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places
where unskilled persons hav
IEC 60439-4 Ed. 2.0 b IEC 60439-4 Ed. 2.0 b:2004 Low-voltage switchgear and controlgear assemblies - Part 4:
Particular requirements for assemblies for construction sites (ACS)
IEC 60439-5 Ed. 2.0 b IEC 60439-5 Ed. 2.0 b:2006 Low-voltage switchgear and controlgear assemblies - Part 5:
Particular requirements for assemblies for power distribution in public networks
IEC 60445 Ed. 4.0 en IEC 60445 Ed. 4.0 en:2006 Basic and safety principles for man-machine interface,
marking and identification - Identification of equipment terminals and conductor terminations
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60446 Ed. 4.0 en IEC 60446 Ed. 4.0 en:2007 Basic and safety principles for man-machine interface,
marking and identification - Identification of conductors by colours or alphanumerics
IEC 60447 Ed. 3.0 b IEC 60447 Ed. 3.0 b:2004 Basic and safety principles for man-machine interface, marking
and identification - Actuating principles
IEC 60454-1 Ed. 2.0 b IEC 60454-1 Ed. 2.0 b:1992 Specifications for pressure-sensitive adhesive tapes for
electrical purposes - Part 1: General requirements
IEC 60454-3-1 Amd.1 Ed. 2.0 b IEC 60454-3-1 Amd.1 Ed. 2.0 b:2001 Amendment 1
IEC 60454-3-1 Ed. 2.1 b IEC 60454-3-1 Ed. 2.1 b:2002 Pressure-sensitive adhesive tapes for electrical purposes
- Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive
IEC 60454-3-10 Ed. 1.0 b IEC 60454-3-10 Ed. 1.0 b:1995 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate
film tapes with rubber thermosetting
IEC 60454-3-11 Ed. 2.0 en IEC 60454-3-11 Ed. 2.0 en:2007 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass
filament, creped cellulosic paper, polye
IEC 60454-3-12 Ed. 2.0 en IEC 60454-3-12 Ed. 2.0 en:2006 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and
polypropylene film tapes with pressure sensiti
IEC 60454-3-14 Ed. 1.0 b IEC 60454-3-14 Ed. 1.0 b:2001 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with
pressure-sensitive adhesive
IEC 60454-3-19 Ed. 1.0 b IEC 60454-3-19 Ed. 1.0 b:2003 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials
with pressure-sensitive adhesive on bo
IEC 60454-3-2 Ed. 3.0 en IEC 60454-3-2 Ed. 3.0 en:2006 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with
rubber thermosetting, rubber thermopla
IEC 60454-3-4 Ed. 3.0 en IEC 60454-3-4 Ed. 3.0 en:2007 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped,
with rubber thermosetting adhesive
IEC 60454-3-6 Ed. 2.0 b IEC 60454-3-6 Ed. 2.0 b:1998 Pressure-sensitive adhesive tapes for electrical purposes
- Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
adhesive
IEC 60454-3-7 Ed. 2.0 b IEC 60454-3-7 Ed. 2.0 b:1998 Pressure-sensitive adhesive tapes for electrical purposes
- Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive
IEC 60454-3-8 Ed. 3.0 en IEC 60454-3-8 Ed. 3.0 en:2006 Pressure-sensitive adhesive tapes for electrical
purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive
adhesive based on glass, cellulose ac
IEC 60455-1 Ed. 2.0 b IEC 60455-1 Ed. 2.0 b:1998 Resin based reactive compounds used for electrical
insulation - Part 1: Definitions and general requirements
IEC 60455-3-1 Ed. 2.0 b IEC 60455-3-1 Ed. 2.0 b:2003 Resin based reactive compounds used for electrical
insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds
IEC 60455-3-11 Ed. 1.0 b IEC 60455-3-11 Ed. 1.0 b:1988 Specification for solventless polymerisable resinous
compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy
resin-based coating powders
IEC 60455-3-2 Ed. 2.0 b IEC 60455-3-2 Ed. 2.0 b:2003 Resin based reactive compounds used for electrical
insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds
IEC 60455-3-3 Ed. 2.0 b IEC 60455-3-3 Ed. 2.0 b:2003 Resin based reactive compounds used for electrical
insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds
IEC 60455-3-4 Ed. 2.0 b IEC 60455-3-4 Ed. 2.0 b:2003 Resin based reactive compounds used for electrical
insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds
IEC 60455-3-5 Ed. 3.0 b IEC 60455-3-5 Ed. 3.0 b:2006 Resin based reactive compounds used for electrical
insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating
resins
IEC 60464-1 Amd.1 Ed. 2.0 en IEC 60464-1 Amd.1 Ed. 2.0 en:2006 Amendment 1 - Varnishes used for
electrical insulation - Part 1: Definitions and general requirements
IEC 60464-1 Ed. 2.0 b IEC 60464-1 Ed. 2.0 b:1998 Varnishes used for electrical insulation - Part 1: Definitions
and general requirements
IEC 60464-3-1 Amd.1 Ed. 2.0 en IEC 60464-3-1 Amd.1 Ed. 2.0 en:2006 Amendment 1 - Varnishes used for
electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing
varnishes
IEC 60464-3-1 Ed. 2.0 b IEC 60464-3-1 Ed. 2.0 b:2001 Varnishes used for electrical insulation - Part 3:
Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
IEC 60464-3-2 Amd.1 Ed. 2.0 en IEC 60464-3-2 Amd.1 Ed. 2.0 en:2006 Amendment 1 - Varnishes used for
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating
varnishes
IEC 60464-3-2 Ed. 2.0 b IEC 60464-3-2 Ed. 2.0 b:2001 Varnishes used for electrical insulation - Part 3:
Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
IEC 60465 Ed. 2.0 b IEC 60465 Ed. 2.0 b:1988 Specification for unused insulating mineral oils for cables with
oil ducts
IEC 60470 Ed. 2.0 b IEC 60470 Ed. 2.0 b:1999 High-voltage alternating current contactors and contactor-based
motor-starters
IEC 60471 Amd.1 Ed. 2.0 b IEC 60471 Amd.1 Ed. 2.0 b:1980 Amendment No. 1
IEC 60471 Ed. 2.0 b IEC 60471 Ed. 2.0 b:1977 Dimensions of clevis and tongue couplings of string insulator
units
IEC 60475 Ed. 1.0 b IEC 60475 Ed. 1.0 b:1974 Method of sampling liquid dielectrics
IEC 60478-4 Ed. 1.0 b IEC 60478-4 Ed. 1.0 b:1976 Stabilized power supplies, d.c. output. Part 4: Tests other
than radio-frequency interference
IEC 60480 Ed. 2.0 b IEC 60480 Ed. 2.0 b:2004 Guidelines for the checking and treatment of sulfur
hexafluoride (SF6) taken from electrical equipment and specification for its re-use
IEC 60481 Ed. 1.0 b IEC 60481 Ed. 1.0 b:1974 Coupling devices for power line carrier systems
IEC 60493-1 Ed. 1.0 b IEC 60493-1 Ed. 1.0 b:1974 Guide for the statistical analysis of ageing test data. Part 1:
Methods based on mean values of normally distributed test results
IEC 60495 Ed. 2.0 b IEC 60495 Ed. 2.0 b:1993 Single sideband power-line carrier terminals
IEC 60502-1 Ed. 2.0 b IEC 60502-1 Ed. 2.0 b:2004 Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1
kV (Um = 1,2 kV) and 3 kV (Um =
IEC 60502-2 Ed. 2.0 b IEC 60502-2 Ed. 2.0 b:2005 Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from
6 kV (Um = 7,2 kV) up to 30 kV
IEC 60502-4 Ed. 2.0 b IEC 60502-4 Ed. 2.0 b:2005 Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on
accessories for cables with rated voltage
IEC 60502-SER Ed. 1.0 b IEC 60502-SER Ed. 1.0 b:2007 Power cables with extruded insulation and their
accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS
IEC 60505 Ed. 3.0 b IEC 60505 Ed. 3.0 b:2004 Evaluation and qualification of electrical insulation systems
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60507 Ed. 2.0 b IEC 60507 Ed. 2.0 b:1991 Artificial pollution tests on high-voltage insulators to be used on
a.c. systems
IEC 60549 Ed. 1.0 b IEC 60549 Ed. 1.0 b:1976 High-voltage fuses for the external protection of shunt power
capacitors
IEC 60554-1 Amd.1 Ed. 1.0 b IEC 60554-1 Amd.1 Ed. 1.0 b:1983 Amendment No. 1
IEC 60554-1 Ed. 1.0 b IEC 60554-1 Ed. 1.0 b:1977 Specification for cellulosic papers for electrical purposes.
Part 1: Definitions and general requirements
IEC 60554-1 Ed. 1.0 b Cor.1 IEC 60554-1 Ed. 1.0 b Cor.1:1979 Corrigendum 1 - Specification for cellulosic
papers for electrical purposes. Part 1: Definitions and general requirements
IEC 60554-3-1 Ed. 1.0 b IEC 60554-3-1 Ed. 1.0 b:1979 Specification for cellulosic papers for electrical
purposes. Part 3: Specifications for individual materials. Sheet 1: General purpose electrical paper
IEC 60554-3-2 Ed. 1.0 b IEC 60554-3-2 Ed. 1.0 b:1983 Specification for cellulosic papers for electrical
purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper
IEC 60554-3-3 Ed. 1.0 b IEC 60554-3-3 Ed. 1.0 b:1980 Specification for cellulosic papers for electrical
purposes. Part 3: Specifications for individual materials. Sheet 3: CrOpe paper
IEC 60554-3-4 Ed. 1.0 b IEC 60554-3-4 Ed. 1.0 b:1979 Specification for cellulosic papers for electrical
purposes. Part 3: Specifications for individual materials. Sheet 4: Electrolytic capacitor paper
IEC 60554-3-5 Ed. 1.0 b IEC 60554-3-5 Ed. 1.0 b:1984 Specification for cellulosic papers for electrical
purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers
IEC 60556 Ed. 2.0 en IEC 60556 Ed. 2.0 en:2006 Gyromagnetic materials intended for application at
microwave frequencies - Measuring methods for properties
IEC 60560 Ed. 1.0 b IEC 60560 Ed. 1.0 b:1977 Definitions and terminology of brush-holders for electrical
machines
IEC 60570 Ed. 4.0 b IEC 60570 Ed. 4.0 b:2003 Electrical supply track systems for luminaires.
IEC 60588-1 Ed. 1.0 b IEC 60588-1 Ed. 1.0 b:1977 Askarels for transformers and capacitors. Part 1: General
IEC 60588-2 Ed. 1.0 b IEC 60588-2 Ed. 1.0 b:1978 Askarels for transformers and capacitors. Part 2: Test
methods
IEC 60588-3 Ed. 1.0 b IEC 60588-3 Ed. 1.0 b:1977 Askarels for transformers and capacitors. Part 3:
Specifications for new askarels
IEC 60588-4 Ed. 1.0 b IEC 60588-4 Ed. 1.0 b:1979 Askarels for transformers and capacitors. Part 4: Guide for
maintenance of transformer askarels in equipment
IEC 60588-5 Ed. 1.0 b IEC 60588-5 Ed. 1.0 b:1979 Askarels for transformers and capacitors. Part 5: Screening
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60598-2-20 Amd.2 Ed. 2.0 b IEC 60598-2-20 Amd.2 Ed. 2.0 b:2002 Amendment 2
IEC 60598-2-20 Ed. 2.2 b IEC 60598-2-20 Ed. 2.2 b:2002 Luminaires - Part 2-20: Particular requirements -
Lighting chains
IEC 60598-2-22 Amd.1 Ed. 3.0 b IEC 60598-2-22 Amd.1 Ed. 3.0 b:2002 Amendment 1
IEC 60598-2-22 Amd.2 Ed. 3.0 b IEC 60598-2-22 Amd.2 Ed. 3.0 b:2008 Amendment 2 - Luminaires - Part
2-22: Particular requirements - Luminaires for emergency lighting
IEC 60598-2-22 Ed. 3.2 b IEC 60598-2-22 Ed. 3.2 b:2008 Luminaires - Part 2-22: Particular requirements -
Luminaires for emergency lighting
IEC 60598-2-23 Amd.1 Ed. 1.0 b IEC 60598-2-23 Amd.1 Ed. 1.0 b:2000 Amendment 1
IEC 60598-2-23 Ed. 1.1 b IEC 60598-2-23 Ed. 1.1 b:2001 Luminaires - Part 2-23: Particular requirements -
Extra low voltage lighting systems for filament lamps
IEC 60598-2-24 Ed. 1.0 b IEC 60598-2-24 Ed. 1.0 b:1997 Luminaires - Part 2-24: Particular requirements -
Luminaires with limited surface temperatures
IEC 60598-2-25 Amd.1 Ed. 1.0 b IEC 60598-2-25 Amd.1 Ed. 1.0 b:2004 Amendment 1 - Luminaires - Part
2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
IEC 60598-2-25 Ed. 1.0 b IEC 60598-2-25 Ed. 1.0 b:1994 Luminaires - Part 2: Particular requirements -
Section 25: Luminaires for use in clinical areas of hospitals and health care buildings
IEC 60598-2-3 Ed. 3.0 b IEC 60598-2-3 Ed. 3.0 b:2002 Luminaires - Part 2-3: Particular requirements -
Luminaires for road and street lighting
IEC 60598-2-4 Ed. 2.0 b IEC 60598-2-4 Ed. 2.0 b:1997 Luminaires - Part 2: Particular requirements - Section 4:
Portable general purpose luminaires
IEC 60598-2-5 Ed. 2.0 b IEC 60598-2-5 Ed. 2.0 b:1998 Luminaires - Part 2-5: Particular requirements -
Floodlights
IEC 60598-2-6 Amd.1 Ed. 2.0 b IEC 60598-2-6 Amd.1 Ed. 2.0 b:1996 Amendment No. 1
IEC 60598-2-6 Ed. 2.0 b IEC 60598-2-6 Ed. 2.0 b:1994 Luminaires - Part 2: Particular requirements - Section 6:
Luminaires with built-in transformers for filament lamps
IEC 60598-2-7 Amd.1 Ed. 1.0 b IEC 60598-2-7 Amd.1 Ed. 1.0 b:1987 Amendment No. 1
IEC 60598-2-7 Amd.2 Ed. 1.0 b IEC 60598-2-7 Amd.2 Ed. 1.0 b:1994 Amendment No. 2
IEC 60598-2-7 Ed. 1.0 b IEC 60598-2-7 Ed. 1.0 b:1982 Luminaires. Part 2: Particular requirements. Section
Seven: Portable luminaires for garden use
IEC 60598-2-8 Amd.1 Ed. 2.0 b IEC 60598-2-8 Amd.1 Ed. 2.0 b:2000 Amendment 1
IEC 60598-2-8 Amd.2 Ed. 2.0 b IEC 60598-2-8 Amd.2 Ed. 2.0 b:2007 Amendment 2 - Luminaires - Part 2-8:
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60635 Amd.1 Ed. 1.0 b IEC 60635 Amd.1 Ed. 1.0 b:1997 Amendment No. 1
IEC 60635 Ed. 1.0 b IEC 60635 Ed. 1.0 b:1978 Toroidal strip-wound cores made of magnetically soft material
IEC 60641-1 Ed. 2.0 b IEC 60641-1 Ed. 2.0 b:2007 Pressboard and presspaper for electrical purposes - Part 1:
Definitions and general requirements
IEC 60641-3-1 Ed. 2.0 b IEC 60641-3-1 Ed. 2.0 b:2008 Pressboard and presspaper for electrical purposes - Part
3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1,
B.2.3, B.3.1, B.3.3, B.4.1, B.4.
IEC 60641-3-2 Ed. 2.0 b IEC 60641-3-2 Ed. 2.0 b:2007 Pressboard and presspaper for electrical purposes - Part
3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3
and P.6.1
IEC 60644 Ed. 2.0 b IEC 60644 Ed. 2.0 b:2009 Specification for high-voltage fuse-links for motor circuit
applications
IEC 60647 Ed. 1.0 b IEC 60647 Ed. 1.0 b:1979 Dimensions for magnetic oxide cores intended for use in power
supplies (EC-cores)
IEC 60652 Ed. 2.0 b IEC 60652 Ed. 2.0 b:2002 Loading tests on overhead line structures
IEC 60660 Ed. 2.0 b IEC 60660 Ed. 2.0 b:1999 Insulators - Tests on indoor post insulators of organic material
for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
IEC 60662 Amd.10 Ed. 1.0 b IEC 60662 Amd.10 Ed. 1.0 b:1997 Amendment No. 10
IEC 60662 Amd.7 Ed. 1.0 b IEC 60662 Amd.7 Ed. 1.0 b:1995 Amendment No. 7
IEC 60662 Amd.8 Ed. 1.0 b IEC 60662 Amd.8 Ed. 1.0 b:1995 Amendment No. 8
IEC 60662 Amd.9 Ed. 1.0 b IEC 60662 Amd.9 Ed. 1.0 b:1997 Amendment No. 9
IEC 60662 Ed. 1.1 b IEC 60662 Ed. 1.1 b:2002 High-pressure sodium vapour lamps
IEC 60664-1 Ed. 2.0 b IEC 60664-1 Ed. 2.0 b:2007 Insulation coordination for equipment within low-voltage
systems - Part 1: Principles, requirements and tests
IEC 60664-3 Ed. 2.0 b IEC 60664-3 Ed. 2.0 b:2003 Insulation coordination for equipment within low-voltage
systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 60664-4 Ed. 2.0 b IEC 60664-4 Ed. 2.0 b:2005 Insulation coordination for equipment within low-voltage
systems - Part 4: Consideration of high-frequency voltage stress
IEC 60664-5 Ed. 2.0 b IEC 60664-5 Ed. 2.0 b:2007 Insulation coordination for equipment within low-voltage
systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less
than 2 mm
IEC 60667-1 Ed. 1.0 b IEC 60667-1 Ed. 1.0 b:1980 Specification for vulcanized fibre for electrical purposes.
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and
enclosures
IEC 60670-24 Ed. 1.0 b IEC 60670-24 Ed. 1.0 b:2005 Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing
protective devices and similar po
IEC 60672-1 Ed. 2.0 b IEC 60672-1 Ed. 2.0 b:1995 Ceramic and glass insulating materials - Part 1: Definitions
and classification
IEC 60672-3 Ed. 2.0 b IEC 60672-3 Ed. 2.0 b:1997 Ceramic and glass-insulating materials - Part 3:
Specifications for individual materials
IEC 60674-1 Ed. 1.0 b IEC 60674-1 Ed. 1.0 b:1980 Specification for plastic films for electrical purposes. Part 1:
Definitions and general requirements
IEC 60674-3-1 Ed. 1.0 b IEC 60674-3-1 Ed. 1.0 b:1998 Plastic films for electrical purposes - Part 3:
Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
IEC 60674-3-2 Ed. 1.0 b IEC 60674-3-2 Ed. 1.0 b:1992 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented
polyethylene terephthalate (PET) films
IEC 60674-3-3 Ed. 1.0 b IEC 60674-3-3 Ed. 1.0 b:1992 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for
electrical insulation
IEC 60674-3-4 Ed. 1.0 b IEC 60674-3-4 Ed. 1.0 b:1993 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for
electrical insulation
IEC 60674-3-7 Ed. 1.0 b IEC 60674-3-7 Ed. 1.0 b:1992 Specification for plastic films for electrical purposes -
Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films
used for electrical insulatio
IEC 60684-1 Ed. 2.0 b IEC 60684-1 Ed. 2.0 b:2003 Flexible insulating sleeving - Part 1: Definitions and
general requirements
IEC 60684-2 Amd.1 Ed. 2.0 b IEC 60684-2 Amd.1 Ed. 2.0 b:2003 Amendment 1 to 60684-2 Ed.2: Flexible
insulating sleeving - Part 2: Methods of test
IEC 60684-2 Amd.2 Ed. 2.0 en IEC 60684-2 Amd.2 Ed. 2.0 en:2005 Amendment 2 - Flexible insulating
sleeving - Part 2: Methods of test
IEC 60684-3-100 Ed. 2.0 b IEC 60684-3-100 Ed. 2.0 b:2001 Flexible insulating sleeving - Part 3:
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
IEC 60684-3-116 Ed. 2.0 b IEC 60684-3-116 Ed. 2.0 b:2003 Flexible insulating sleeving - Part 3: Specifications
for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene - General purpose
IEC 60684-3-121 Ed. 2.0 b IEC 60684-3-121 Ed. 2.0 b:2001 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving
IEC 60684-3-136 Ed. 1.0 b IEC 60684-3-136 Ed. 1.0 b:1997 Flexible insulating sleeving - Part 3: Specification
for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
IEC 60684-3-145 Ed. 1.0 b IEC 60684-3-145 Ed. 1.0 b:2001 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving
IEC 60684-3-151 Ed. 1.0 b IEC 60684-3-151 Ed. 1.0 b:1998 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose
IEC 60684-3-165 Ed. 1.0 b IEC 60684-3-165 Ed. 1.0 b:2004 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire
hazard sleeving
IEC 60684-3-209 Ed. 2.0 b IEC 60684-3-209 Ed. 2.0 b:2003 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose,
flame retarded, shrink ratio 2:1
IEC 60684-3-211 Ed. 3.0 b IEC 60684-3-211 Ed. 3.0 b:2007 Flexible insulating sleeving - Part 3: Specifications
for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
IEC 60684-3-212 Ed. 2.0 en IEC 60684-3-212 Ed. 2.0 en:2005 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
IEC 60684-3-214 Ed. 2.0 en IEC 60684-3-214 Ed. 2.0 en:2005 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame
retarded, shrink ratio 3:1 - Thick and medium wall
IEC 60684-3-216 Amd.1 Ed. 1.0 b IEC 60684-3-216 Amd.1 Ed. 1.0 b:2005 Amendment 1 - Flexible insulating
sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame retarded,
limited-fire-hazard sleeving
IEC 60684-3-216 Ed. 1.0 b Cor.1 IEC 60684-3-216 Ed. 1.0 b Cor.1:2003 Corrigendum 1 - Flexible insulating
sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded,
limited-fire-hazard sleeving
IEC 60684-3-216 Ed. 1.1 b IEC 60684-3-216 Ed. 1.1 b:2005 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
sleeving
IEC 60684-3-228 Ed. 2.0 b IEC 60684-3-228 Ed. 2.0 b:2004 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride
sleeving, flame retarded, fluid resistant, shrin
IEC 60684-3-229 Ed. 1.0 b IEC 60684-3-229 Ed. 1.0 b:2003 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene
fluoride sleeving, flame retarded, fluid resistant, sh
IEC 60684-3-233 Ed. 2.0 en IEC 60684-3-233 Ed. 2.0 en:2006 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame
retarded, fluid resistant, shrink ratio 2:1
IEC 60684-3-240 Ed. 2.0 b IEC 60684-3-240 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
IEC 60684-3-246 Ed. 3.0 b IEC 60684-3-246 Ed. 3.0 b:2007 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall,
non-flame retarded
IEC 60684-3-248 Ed. 1.0 b IEC 60684-3-248 Ed. 1.0 b:2007 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall
polyolefin sleeving, flame retarded, shrink ratios 2:1,
IEC 60684-3-271 Ed. 2.0 b IEC 60684-3-271 Ed. 2.0 b:2004 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded,
fluid resistant, shrink ratio 2:1
IEC 60684-3-300 Ed. 2.0 b IEC 60684-3-300 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated
IEC 60684-3-320 Ed. 2.0 b IEC 60684-3-320 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly
impregnated
IEC 60684-3-340 Ed. 2.0 b IEC 60684-3-340 Ed. 2.0 b:2003 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene
terephthalate textile sleeving
IEC 60684-3-343 Ed. 2.0 b IEC 60684-3-343 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene
chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60684-3-400 Ed. 2.0 b IEC 60684-3-400 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone
elastomer coating
IEC 60684-3-403 Ed. 2.0 b IEC 60684-3-403 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3: Specification
for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating
IEC 60684-3-406 Ed. 2.0 b IEC 60684-3-406 Ed. 2.0 b:2003 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating
IEC 60684-3-409 Ed. 1.0 b IEC 60684-3-409 Ed. 1.0 b:1999 Flexible insulating sleeving - Part 3:
Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane
(PUR)-based coating
IEC 60684-3-420 Ed. 2.0 b IEC 60684-3-420 Ed. 2.0 b:2002 Flexible insulating sleeving - Part 3: Specification
for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic
based coating
IEC 60691 Amd.1 Ed. 3.0 en IEC 60691 Amd.1 Ed. 3.0 en:2006 Amendment 1 - Thermal-links - Requirements
and application guide
IEC 60691 Ed. 3.0 b IEC 60691 Ed. 3.0 b:2002 Thermal-links - Requirements and application guide
IEC 60695-10-2 Ed. 2.0 b IEC 60695-10-2 Ed. 2.0 b:2003 Fire hazard testing - Part 10-2: Abnormal heat - Ball
pressure test
IEC 60695-10-2 Ed. 2.0 b Cor.1 IEC 60695-10-2 Ed. 2.0 b Cor.1:2006 Corrigendum 1 - Fire hazard testing -
Part 10-2: Abnormal heat - Ball pressure test
IEC 60695-10-3 Ed. 1.0 b IEC 60695-10-3 Ed. 1.0 b:2002 Fire hazard testing - Part 10-3: Abnormal heat -
Mould stress relief distortion test
IEC 60695-5-1 Ed. 2.0 b IEC 60695-5-1 Ed. 2.0 b:2002 Fire hazard testing - Part 5-1: Corrosion damage effects
of fire effluent - General guidance
IEC 60700-1 Amd.1 Ed. 1.0 b IEC 60700-1 Amd.1 Ed. 1.0 b:2003 Amendment 1
IEC 60700-1 Amd.2 Ed. 1.0 b IEC 60700-1 Amd.2 Ed. 1.0 b:2008 Amendment 2 - Thyristor valves for high
voltage direct current (HVDC) power transmission - Part 1: Electrical testing
IEC 60700-1 Ed. 1.2 b IEC 60700-1 Ed. 1.2 b:2008 Thyristor valves for high voltage direct current (HVDC)
power transmission - Part 1: Electrical testing
IEC 60702-1 Ed. 3.0 b IEC 60702-1 Ed. 3.0 b:2002 Mineral insulated cables and their terminations with a rated
voltage not exceeding 750 V - Part 1: Cables
IEC 60702-2 Ed. 2.0 b IEC 60702-2 Ed. 2.0 b:2002 Mineral insulated cables and their terminations with a rated
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60811-1-2 Amd.1 Ed. 1.0 b IEC 60811-1-2 Amd.1 Ed. 1.0 b:1989 Amendment No. 1
IEC 60811-1-2 Amd.2 Ed. 1.0 b IEC 60811-1-2 Amd.2 Ed. 1.0 b:2000 Amendment 2
IEC 60811-1-2 Ed. 1.0 b IEC 60811-1-2 Ed. 1.0 b:1985 Common test methods for insulating and sheathing
materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
IEC 60811-1-2 Ed. 1.0 b Cor.1 IEC 60811-1-2 Ed. 1.0 b Cor.1:1986 Corrigendum 1 - Common test methods for
insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two:
Thermal ageing methods
IEC 60811-1-3 Amd.1 Ed. 2.0 b IEC 60811-1-3 Amd.1 Ed. 2.0 b:2001 Amendment 1
IEC 60811-1-3 Ed. 2.1 b IEC 60811-1-3 Ed. 2.1 b:2001 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 1-3: General application -Methods for determining the density -
Water absorption tests - Shrinkage test
IEC 60811-1-4 Amd.1 Ed. 1.0 b IEC 60811-1-4 Amd.1 Ed. 1.0 b:1993 Amendment No. 1
IEC 60811-1-4 Amd.2 Ed. 1.0 b IEC 60811-1-4 Amd.2 Ed. 1.0 b:2001 Amendment 2
IEC 60811-1-4 Ed. 1.0 b IEC 60811-1-4 Ed. 1.0 b:1985 Common test methods for insulating and sheathing
materials of electric cables - Part 1: Methods for general application - Section Four: Test at low temperature
IEC 60811-1-4 Ed. 1.0 b Cor.1 IEC 60811-1-4 Ed. 1.0 b Cor.1:1986 Corrigendum 1 - Common test methods for
insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four:
Tests at low temperature
IEC 60811-2-1 Amd.1 Ed. 2.0 b IEC 60811-2-1 Amd.1 Ed. 2.0 b:2001 Amendment 1
IEC 60811-2-1 Ed. 2.1 b IEC 60811-2-1 Ed. 2.1 b:2001 Common test methods for insulating and sheathing
materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone
resistance, hot set and mineral oil immersion te
IEC 60811-3-1 Amd.1 Ed. 1.0 b IEC 60811-3-1 Amd.1 Ed. 1.0 b:1994 Amendment No. 1
IEC 60811-3-1 Amd.2 Ed. 1.0 b IEC 60811-3-1 Amd.2 Ed. 1.0 b:2001 Amendment 2
IEC 60811-3-1 Ed. 1.0 b IEC 60811-3-1 Ed. 1.0 b:1985 Common test methods for insulating and sheathing
materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high
temperature - Tests for resistance to cra
IEC 60811-3-1 Ed. 1.0 b Cor.1 IEC 60811-3-1 Ed. 1.0 b Cor.1:1986 Corrigendum 1 - Common test methods for
insulating ans sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One:
Pressure test at high temperature - Tests for r
IEC 60811-3-2 Amd.1 Ed. 1.0 b IEC 60811-3-2 Amd.1 Ed. 1.0 b:1993 Amendment No. 1
IEC 60811-3-2 Amd.2 Ed. 1.0 b IEC 60811-3-2 Amd.2 Ed. 1.0 b:2003 Amendment 2 - Insulating and sheathing
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds
- Loss of mass test - Thermal stability test
IEC 60811-3-2 Ed. 1.0 b IEC 60811-3-2 Ed. 1.0 b:1985 Common test methods for insulating and sheathing
materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test -
Thermal stability test
IEC 60811-3-2 Ed. 1.0 b Cor.1 IEC 60811-3-2 Ed. 1.0 b Cor.1:1986 Corrigendum 1 - Common test methods for
insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section
Two: Loss of mass test - Thermal stability test
IEC 60811-4-1 Ed. 2.0 b IEC 60811-4-1 Ed. 2.0 b:2004 Insulating and sheathing materials of electric and
optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene
compounds - Resistance to environmental stress cr
IEC 60811-4-2 Ed. 2.0 b IEC 60811-4-2 Ed. 2.0 b:2004 Insulating and sheathing materials of electric and
optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene
compounds - Tensile strength and elongation at br
IEC 60811-5-1 Amd.1 Ed. 1.0 b IEC 60811-5-1 Amd.1 Ed. 1.0 b:2003 Amendment 1 - Insulating and sheathing
materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling
compounds - Drop point - Separation of oil - Lower tempera
IEC 60811-5-1 Ed. 1.1 b IEC 60811-5-1 Ed. 1.1 b:2004 Insulating and sheathing materials of electric and
optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point -
Separation of oil - Lower temperature brittlene
IEC 60819-1 Amd.1 Ed. 2.0 b IEC 60819-1 Amd.1 Ed. 2.0 b:1996 Amendment No. 1 to IEC 819-1
IEC 60819-1 Ed. 2.0 b IEC 60819-1 Ed. 2.0 b:1995 Non-cellulosic papers for electrical purposes - Part 1:
Definitions and general requirements
IEC 60819-2 Ed. 1.0 b IEC 60819-2 Ed. 1.0 b:2001 Non-cellulosic papers for electrical purposes - Part 2:
Methods of test
IEC 60819-3-1 Ed. 1.0 b IEC 60819-3-1 Ed. 1.0 b:2001 Non-cellulosic papers for electrical purposes - Part 3:
Specifications for individual materials - Sheet 1: Filled glass paper
IEC 60819-3-2 Ed. 1.0 b IEC 60819-3-2 Ed. 1.0 b:2001 Non-cellulosic papers for electrical purposes - Part 3:
Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper
IEC 60819-3-3 Ed. 2.0 b IEC 60819-3-3 Ed. 2.0 b:2006 Non-cellulosic papers for electrical purposes - Part 3:
Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
IEC 60819-3-3 Ed. 2.0 b Cor.1 IEC 60819-3-3 Ed. 2.0 b Cor.1:2008 Corrigendum 1 - Non-cellulosic papers for
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic
polyamide) papers
IEC 60819-3-4 Ed. 1.0 b IEC 60819-3-4 Ed. 1.0 b:2001 Non-cellulosic papers for electrical purposes - Part 3:
Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica
particles
IEC 60826 Ed. 3.0 b IEC 60826 Ed. 3.0 b:2003 Design criteria of overhead transmission lines
IEC 60831-1 Amd.1 Ed. 2.0 b IEC 60831-1 Amd.1 Ed. 2.0 b:2002 Amendment 1
IEC 60831-1 Ed. 2.1 b IEC 60831-1 Ed. 2.1 b:2002 Shunt power capacitors of the self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating -
Safety requirements - Guide for
IEC 60831-2 Ed. 2.0 b IEC 60831-2 Ed. 2.0 b:1995 Shunt power capacitors of the self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction
test
IEC 60834-1 Ed. 2.0 b IEC 60834-1 Ed. 2.0 b:1999 Teleprotection equipment of power systems - Performance
and testing - Part 1: Command systems
IEC 60834-2 Ed. 1.0 b IEC 60834-2 Ed. 1.0 b:1993 Performance and testing of teleprotection equipment of
power systems - Part 2: Analogue comparison systems
IEC 60836 Ed. 2.0 b IEC 60836 Ed. 2.0 b:2005 Specifications for unused silicone insulating liquids for
electrotechnical purposes
IEC 60838-1 Amd.1 Ed. 4.0 b IEC 60838-1 Amd.1 Ed. 4.0 b:2008 Amendment 1 - Miscellaneous lampholders -
Part 1: General requirements and tests
IEC 60838-1 Ed. 4.1 b IEC 60838-1 Ed. 4.1 b:2008 Miscellaneous lampholders - Part 1: General requirements
and tests
IEC 60838-2-1 Amd.1 Ed. 1.0 b IEC 60838-2-1 Amd.1 Ed. 1.0 b:1998 Amendment 1
IEC 60838-2-1 Amd.2 Ed. 1.0 b IEC 60838-2-1 Amd.2 Ed. 1.0 b:2004 Amendment 2 - Miscellaneous
lampholders - Part 2-1: Particular requirements - Lampholders S14
IEC 60838-2-1 Ed. 1.0 b IEC 60838-2-1 Ed. 1.0 b:1994 Miscellaneous lampholders - Part 2: Particular
requirements - Section 1: Lampholders S14
IEC 60838-2-2 Ed. 1.0 b IEC 60838-2-2 Ed. 1.0 b:2006 Miscellaneous lampholders - Part 2-2: Particular
requirements - Connectors for LED-modules
IEC 60840 Ed. 3.0 b IEC 60840 Ed. 3.0 b:2004 Power cables with extruded insulation and their accessories for
rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60848 Ed. 2.0 b IEC 60848 Ed. 2.0 b:2002 GRAFCET specification language for sequential function charts
IEC 60851-1 Amd.1 Ed. 2.0 b IEC 60851-1 Amd.1 Ed. 2.0 b:2003 Amendment 1 - Winding wires - Test
methods - Part 1: General
IEC 60851-1 Ed. 2.0 b IEC 60851-1 Ed. 2.0 b:1996 Methods of test for winding wires - Part 1: General
IEC 60851-2 Amd.1 Ed. 2.0 b IEC 60851-2 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60851-2 Amd.2 Ed. 2.0 b IEC 60851-2 Amd.2 Ed. 2.0 b:2003 Amendment 2 - Winding Wires - Test
methods - Part 2: Determination of dimensions
IEC 60851-2 Ed. 2.1 b IEC 60851-2 Ed. 2.1 b:1997 Winding wires - Test methods - Part 2: Determination of
dimensions
IEC 60851-3 Ed. 3.0 b IEC 60851-3 Ed. 3.0 b:2009 Winding wires - Test methods - Part 3: Mechanical
properties
IEC 60851-4 Amd.1 Ed. 2.0 b IEC 60851-4 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60851-4 Amd.2 Ed. 2.0 b IEC 60851-4 Amd.2 Ed. 2.0 b:2005 Amendment 2 - Winding wires - Test
methods - Part 4: Chemical properties
IEC 60851-4 Ed. 2.2 b IEC 60851-4 Ed. 2.2 b:2005 Winding wires - Test methods - Part 4: Chemical properties
IEC 60851-5 Ed. 4.0 b IEC 60851-5 Ed. 4.0 b:2008 Winding wires - Test methods - Part 5: Electrical properties
IEC 60851-6 Amd.1 Ed. 2.0 b IEC 60851-6 Amd.1 Ed. 2.0 b:1997 Amendment No. 1
IEC 60851-6 Amd.2 Ed. 2.0 b IEC 60851-6 Amd.2 Ed. 2.0 b:2003 Amendment 2 - Winding wires - Test
methods - Part 6 : Thermal properties
IEC 60851-6 Ed. 2.0 b IEC 60851-6 Ed. 2.0 b:1996 Methods of test for winding wires - Part 6: Thermal
properties
IEC 60852-1 Ed. 1.0 b IEC 60852-1 Ed. 1.0 b:1986 Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment. Part 1: Transformers and inductors using YEI-1 laminations
IEC 60852-2 Ed. 1.0 b IEC 60852-2 Ed. 1.0 b:1992 Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for
printed wiring board mounting
IEC 60852-3 Ed. 1.0 b IEC 60852-3 Ed. 1.0 b:1992 Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations
IEC 60852-4 Ed. 1.0 b IEC 60852-4 Ed. 1.0 b:1996 Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations
IEC 60852-5 Ed. 1.0 b IEC 60852-5 Ed. 1.0 b:1994 Outline dimensions of transformers and inductors for use in
telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60853-1 Amd.1 Ed. 1.0 b IEC 60853-1 Amd.1 Ed. 1.0 b:1994 Amendment No. 1
IEC 60853-1 Amd.2 Ed. 1.0 b IEC 60853-1 Amd.2 Ed. 1.0 b:2008 Amendment 2 - Calculation of the cyclic and
emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30 (36) kV
IEC 60853-1 Ed. 1.0 b IEC 60853-1 Ed. 1.0 b:1985 Calculation of the cyclic and emergency current rating of
cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV
IEC 60853-2 Amd.1 Ed. 1.0 b IEC 60853-2 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Calculation of the cyclic and
emergency current rating of cables - Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency
ratings for cables of all voltages
IEC 60853-2 Ed. 1.0 b IEC 60853-2 Ed. 1.0 b:1989 Calculation of the cyclic and emergency current rating of
cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all
voltages
IEC 60853-3 Ed. 1.0 b IEC 60853-3 Ed. 1.0 b:2002 Calculation of the cyclic and emergency current rating of
cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
IEC 60867 Ed. 2.0 b IEC 60867 Ed. 2.0 b:1993 Insulating liquids - Specifications for unused liquids based on
synthetic aromatic hydrocarbons
IEC 60870-2-1 Ed. 2.0 b IEC 60870-2-1 Ed. 2.0 b:1995 Telecontrol equipment and systems - Part 2: Operating
conditions - Section 1: Power supply and electromagnetic compatibility
IEC 60870-2-2 Ed. 1.0 b IEC 60870-2-2 Ed. 1.0 b:1996 Telecontrol equipment and systems - Part 2: Operating
conditions - Section 2: Environmental conditions (climatic, mechanical and other non electrical influences)
IEC 60871-1 Ed. 3.0 b IEC 60871-1 Ed. 3.0 b:2005 Shunt capacitors for a.c. power systems having a rated
voltage above 1000 V - Part 1: General
IEC 60871-4 Ed. 1.0 b IEC 60871-4 Ed. 1.0 b:1996 Shunt capacitors for AC power systems having a rated
voltage above 1000 V - Part 4: Internal fuses
IEC 60884-1 Amd.1 Ed. 3.0 b IEC 60884-1 Amd.1 Ed. 3.0 b:2006 Amendment 1 - Plugs and socket-outlets for
household and similar purposes - Part 1: General requirements
IEC 60884-1 Ed. 3.1 b IEC 60884-1 Ed. 3.1 b:2006 Plugs and socket-outlets for household and similar purposes
- Part 1: General requirements
IEC 60884-2-1 Ed. 2.0 b IEC 60884-2-1 Ed. 2.0 b:2006 Plugs and socket-outlets for household and similar
purposes - Part 2-1: Particular requirements for fused plugs
IEC 60884-2-2 Ed. 2.0 b IEC 60884-2-2 Ed. 2.0 b:2006 Plugs and socket-outlets for household and similar
purposes - Part 2-2: Particular requirements for socket-outlets for appliances
IEC 60884-2-3 Ed. 2.0 b IEC 60884-2-3 Ed. 2.0 b:2006 Plugs and socket-outlets for household and similar
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
IEC 60884-2-4 Ed. 3.0 b IEC 60884-2-4 Ed. 3.0 b:2007 Plugs and socket-outlets for household and similar
purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
IEC 60884-2-5 Ed. 1.0 b IEC 60884-2-5 Ed. 1.0 b:1995 Plugs and socket-outlets for household and similar
purposes - Part 2: Particular requirements for adaptors
IEC 60884-2-6 Ed. 1.0 b IEC 60884-2-6 Ed. 1.0 b:1997 Plugs and socket-outlets for household and similar
purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical
installations
IEC 60885-1 Ed. 1.0 b IEC 60885-1 Ed. 1.0 b:1987 Electrical test methods for electric cables. Part 1: Electrical
tests for cables, cords and wires for voltages up to and including 450/750 V
IEC 60885-2 Ed. 1.0 b IEC 60885-2 Ed. 1.0 b:1987 Electrical test methods for electric cables. Part 2: Partial
discharge tests
IEC 60885-3 Ed. 1.0 b IEC 60885-3 Ed. 1.0 b:1988 Electrical test methods for electric cables. Part 3: Test
methods for partial discharge measurements on lengths of extruded power cables
IEC 60888 Ed. 1.0 b IEC 60888 Ed. 1.0 b:1987 Zinc-coated steel wires for stranded conductors
IEC 60889 Ed. 1.0 b IEC 60889 Ed. 1.0 b:1987 Hard-drawn aluminium wire for overhead line conductors
IEC 60893-1 Ed. 2.0 b IEC 60893-1 Ed. 2.0 b:2004 Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general
requirements
IEC 60893-2 Ed. 2.0 b IEC 60893-2 Ed. 2.0 b:2003 Industrial rigid laminated sheets based on thermosetting
resins for electrical purposes - Part 2: Methods of test
IEC 60893-3-1 Ed. 2.0 b IEC 60893-3-1 Ed. 2.0 b:2003 Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials -
Requirements for types of industria
IEC 60893-3-2 Ed. 2.0 b IEC 60893-3-2 Ed. 2.0 b:2003 Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials -
Requirements for rigid laminated sh
IEC 60893-3-3 Ed. 2.0 b IEC 60893-3-3 Ed. 2.0 b:2003 Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials -
Requirements for rigid laminated sh
IEC 60893-3-4 Ed. 2.0 b IEC 60893-3-4 Ed. 2.0 b:2003 Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials -
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60901 Amd.4 Ed. 2.0 b IEC 60901 Amd.4 Ed. 2.0 b:2007 Amendment 4 - Single-capped fluorescent lamps
- Performance specifications
IEC 60901 Ed. 2.2 b IEC 60901 Ed. 2.2 b:2001 Single-capped fluorescent lamps - Performance specifications
IEC 60903 Ed. 2.0 b IEC 60903 Ed. 2.0 b:2002 Live working - Gloves of insulating material
IEC 60903 Ed. 2.0 b Cor.2 IEC 60903 Ed. 2.0 b Cor.2:2005 Corrigendum 2 - Live working - Gloves of
insulating material
IEC 60906-1 Ed. 2.0 b IEC 60906-1 Ed. 2.0 b:2009 IEC system of plugs and socket-outlets for household and
similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
IEC 60906-2 Ed. 2.0 b IEC 60906-2 Ed. 2.0 b:1997 IEC system of plugs and socket-outlets for household and
similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c.
IEC 60906-3 Ed. 1.0 b IEC 60906-3 Ed. 1.0 b:1994 IEC System of plugs and socket-outlets for household and
similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c.
IEC 60913 Ed. 1.0 b IEC 60913 Ed. 1.0 b:1988 Electric traction overhead lines
IEC 60918 Amd.1 Ed. 1.0 b IEC 60918 Amd.1 Ed. 1.0 b:1992 Amendment No. 1
IEC 60918 Ed. 1.0 b IEC 60918 Ed. 1.0 b:1987 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for
insulation displacement termination
IEC 60921 Amd.1 Ed. 2.0 b IEC 60921 Amd.1 Ed. 2.0 b:2006 Amendment 1 - Ballasts for tubular fluorescent
lamps - Performance requirements
IEC 60921 Ed. 2.1 b IEC 60921 Ed. 2.1 b:2006 Ballasts for tubular fluorescent lamps - Performance
requirements
IEC 60923 Amd.1 Ed. 3.0 b IEC 60923 Amd.1 Ed. 3.0 b:2006 Amendment 1 - Auxiliaries for lamps - Ballasts
for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
IEC 60923 Ed. 3.1 b IEC 60923 Ed. 3.1 b:2006 Auxiliaries for lamps - Ballasts for discharge lamps (excluding
tubular fluorescent lamps) - Performance requirements
IEC 60925 Amd.1 Ed. 1.0 b IEC 60925 Amd.1 Ed. 1.0 b:1996 Amendment No.1
IEC 60925 Amd.2 Ed. 1.0 b IEC 60925 Amd.2 Ed. 1.0 b:2001 Amendment 2
IEC 60925 Ed. 1.2 b IEC 60925 Ed. 1.2 b:2001 DC supplied electronic ballasts for tubular fluorescent lamps -
Performance requirements
IEC 60927 Ed. 3.0 b IEC 60927 Ed. 3.0 b:2007 Auxiliaries for lamps - Starting devices (other than glow starters)
- Performance requirements
IEC 60929 Ed. 3.0 b IEC 60929 Ed. 3.0 b:2006 AC-supplied electronic ballasts for tubular fluorescent lamps -
Performance requirements
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60931-1 Amd.1 Ed. 2.0 b IEC 60931-1 Amd.1 Ed. 2.0 b:2002 Amendment 1
IEC 60931-1 Ed. 2.0 b IEC 60931-1 Ed. 2.0 b:1996 Shunt power capacitors of the non-self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating -
Safety requirements - Guide
IEC 60931-2 Ed. 2.0 b IEC 60931-2 Ed. 2.0 b:1995 Shunt power capacitors of the non-self-healing type for a.c.
systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test
IEC 60931-3 Ed. 1.0 b IEC 60931-3 Ed. 1.0 b:1996 Shunt capacitors of the non-self-healing type for AC power
systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses
IEC 60934 Amd.1 Ed. 3.0 b IEC 60934 Amd.1 Ed. 3.0 b:2007 Amendment 1 - Circuit-breakers for equipment
(CBE)
IEC 60934 Ed. 3.1 b IEC 60934 Ed. 3.1 b:2007 Circuit-breakers for equipment (CBE)
IEC 60938-1 Amd.1 Ed. 2.0 b IEC 60938-1 Amd.1 Ed. 2.0 b:2006 Amendment 1 - Fixed inductors for
electromagnetic interference suppression - Part 1: Generic specification
IEC 60938-1 Ed. 2.0 b IEC 60938-1 Ed. 2.0 b:1999 Fixed inductors for electromagnetic interference
suppression - Part 1: Generic specification
IEC 60938-2 Amd.1 Ed. 2.0 b IEC 60938-2 Amd.1 Ed. 2.0 b:2006 Amendment 1 - Fixed inductors for
electromagnetic interference suppression - Part 2: Sectional specification
IEC 60938-2 Ed. 2.0 b IEC 60938-2 Ed. 2.0 b:1999 Fixed inductors for electromagnetic interference
suppression - Part 2: Sectional specification
IEC 60938-2-1 Ed. 1.0 en IEC 60938-2-1 Ed. 1.0 en:1999 Fixed inductors for electromagnetic interference
suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required. Assessment
level D
IEC 60938-2-2 Ed. 1.0 en IEC 60938-2-2 Ed. 1.0 en:1999 Fixed inductors for electromagnetic interference
suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only)
IEC 60944 Ed. 1.0 b IEC 60944 Ed. 1.0 b:1988 Guide for the maintenance of silicone transformer liquids
IEC 60947-1 Ed. 5.0 b IEC 60947-1 Ed. 5.0 b:2007 Low-voltage switchgear and controlgear - Part 1: General
rules
IEC 60947-2 Amd.1 Ed. 4.0 b IEC 60947-2 Amd.1 Ed. 4.0 b:2009 Amendment 1 - Low-voltage switchgear and
controlgear - Part 2: Circuit-breakers
IEC 60947-2 Ed. 4.1 b IEC 60947-2 Ed. 4.1 b:2009 Low-voltage switchgear and controlgear - Part 2:
Circuit-breakers
IEC 60947-3 Ed. 3.0 b IEC 60947-3 Ed. 3.0 b:2008 Low-voltage switchgear and controlgear - Part 3: Switches,
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 60947-5-5 Amd.1 Ed. 1.0 b IEC 60947-5-5 Amd.1 Ed. 1.0 b:2005 Amendment 1 - Low-voltage switchgear
and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device
with mechanical latching function
IEC 60947-5-5 Amd.1 Ed. 1.0 b Cor.1 IEC 60947-5-5 Amd.1 Ed. 1.0 b Cor.1:2007 Corrigendum 1 -
Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching
elements - Electrical emergency stop device with mechanical latching function
IEC 60947-5-5 Ed. 1.1 b IEC 60947-5-5 Ed. 1.1 b:2005 Low-voltage switchgear and controlgear - Part 5-5:
Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching
function
IEC 60947-5-6 Ed. 1.0 b IEC 60947-5-6 Ed. 1.0 b:1999 Low-voltage switchgear and controlgear - Part 5-6:
Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers
(NAMUR)
IEC 60947-5-7 Ed. 1.0 b IEC 60947-5-7 Ed. 1.0 b:2003 Low-voltage switchgear and controlgear - Part 5-7:
Control circuit devices and switching elements - Requirements for proximity devices with analogue output
IEC 60947-5-8 Ed. 1.0 b IEC 60947-5-8 Ed. 1.0 b:2006 Low-voltage switchgear and controlgear - Part 5-8:
Control circuit devices and switching elements - Three-position enabling switches
IEC 60947-5-9 Ed. 1.0 b IEC 60947-5-9 Ed. 1.0 b:2006 Low-voltage switchgear and controlgear - Part 5-9:
Control circuit devices and switching elements - Flow rate switches
IEC 60947-6-1 Ed. 2.0 b IEC 60947-6-1 Ed. 2.0 b:2005 Low-voltage switchgear and controlgear - Part 6-1:
Multiple function equipment - Transfer switching equipment
IEC 60947-6-2 Amd.1 Ed. 2.0 b IEC 60947-6-2 Amd.1 Ed. 2.0 b:2007 Amendment 1 - Low-voltage switchgear
and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or
equipment) (CPS)
IEC 60947-6-2 Ed. 2.1 b IEC 60947-6-2 Ed. 2.1 b:2007 Low-voltage switchgear and controlgear - Part 6-2:
Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
IEC 60947-7-1 Ed. 3.0 b IEC 60947-7-1 Ed. 3.0 b:2009 Low-voltage switchgear and controlgear - Part 7-1:
Ancillary equipment - Terminal blocks for copper conductors
IEC 60947-7-2 Ed. 3.0 b IEC 60947-7-2 Ed. 3.0 b:2009 Low-voltage switchgear and controlgear - Part 7-2:
Ancillary equipment - Protective conductor terminal blocks for copper conductors
IEC 60947-7-3 Ed. 2.0 b IEC 60947-7-3 Ed. 2.0 b:2009 Low-voltage switchgear and controlgear - Part 7-3:
Ancillary equipment - Safety requirements for fuse terminal blocks
IEC 60947-8 Amd.1 Ed. 1.0 b IEC 60947-8 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Low-voltage switchgear and
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60947-8 Ed. 1.1 b IEC 60947-8 Ed. 1.1 b:2006 Low-voltage switchgear and controlgear - Part 8: Control
units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60949 Amd.1 Ed. 1.0 b IEC 60949 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Calculation of thermally
permissible short-circuit currents, taking into account non-adiabatic heating effects
IEC 60949 Ed. 1.0 b IEC 60949 Ed. 1.0 b:1988 Calculation of thermally permissible short-circuit currents,
taking into account non-adiabatic heating effects
IEC 60952-1 Ed. 2.0 b IEC 60952-1 Ed. 2.0 b:2004 Aircraft batteries - Part 1: General test requirements and
performance levels
IEC 60952-2 Ed. 2.0 b IEC 60952-2 Ed. 2.0 b:2004 Aircraft batteries - Part 2: Design and construction
requirements
IEC 60952-3 Ed. 2.0 b IEC 60952-3 Ed. 2.0 b:2004 Aircraft batteries - Part 3: Product specification and
declaration of design and performance (DDP)
IEC 60963 Ed. 1.0 b IEC 60963 Ed. 1.0 b:1988 Specification for unused polybutenes
IEC 60968 Amd.1 Ed. 1.0 b IEC 60968 Amd.1 Ed. 1.0 b:1991 Amendment No. 1
IEC 60968 Amd.2 Ed. 1.0 b IEC 60968 Amd.2 Ed. 1.0 b:1999 Amendment 2
IEC 60968 Ed. 1.2 b IEC 60968 Ed. 1.2 b:1999 Self-ballasted lamps for general lighting services - Safety
requirements
IEC 60969 Amd.1 Ed. 1.0 b IEC 60969 Amd.1 Ed. 1.0 b:1991 Amendment No. 1
IEC 60969 Amd.2 Ed. 1.0 b IEC 60969 Amd.2 Ed. 1.0 b:2000 Amendment 2
IEC 60969 Ed. 1.2 b IEC 60969 Ed. 1.2 b:2001 Self-ballasted lamps for general lighting services - Performance
requirements
IEC 60979 Ed. 1.0 b IEC 60979 Ed. 1.0 b:1989 Wires for wire wrapping applications
IEC 60981 Ed. 2.0 b IEC 60981 Ed. 2.0 b:2004 Extra heavy-duty electrical rigid steel conduits
IEC 60983 Amd.1 Ed. 2.0 b IEC 60983 Amd.1 Ed. 2.0 b:2005 Amendment 1 - Miniature lamps
IEC 60983 Ed. 2.1 b IEC 60983 Ed. 2.1 b:2005 Miniature lamps
IEC 60984 Ed. 1.0 b Cor.3 IEC 60984 Ed. 1.0 b Cor.3:2005 Corrigendum 3 - Sleeves of insulating material for
live working
IEC 60984 Ed. 1.1 b IEC 60984 Ed. 1.1 b:2002 Sleeves of insulating material for live working
IEC 60986 Amd.1 Ed. 2.0 b IEC 60986 Amd.1 Ed. 2.0 b:2008 Amendment 1 - Short-circuit temperature limits
of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 60986 Ed. 2.1 b IEC 60986 Ed. 2.1 b:2008 Short-circuit temperature limits of electric cables with rated
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 61008-1 Ed. 2.2 b IEC 61008-1 Ed. 2.2 b:2006 Residual current operated circuit-breakers without integral
overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-2-1 Ed. 1.0 b IEC 61008-2-1 Ed. 1.0 b:1990 Residual current operated circuit-breakers without
integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general
rules to RCCB's functionally independ
IEC 61008-2-2 Ed. 1.0 b IEC 61008-2-2 Ed. 1.0 b:1990 Residual current operated circuit-breakers without
integral overcurrent protection for household and similar uses (RCCB's). Part 2-2: Applicability of the general
rules to RCCB's functionally dependen
IEC 61009-1 Amd.1 Ed. 2.0 b IEC 61009-1 Amd.1 Ed. 2.0 b:2002 Amendment 1
IEC 61009-1 Amd.2 Ed. 2.0 b IEC 61009-1 Amd.2 Ed. 2.0 b:2006 Amendment 2 - Residual current operated
circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General
rules
IEC 61009-1 Ed. 2.0 b Cor.1 IEC 61009-1 Ed. 2.0 b Cor.1:2003 Corrigendum 1 - Residual current operated
circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General
rules
IEC 61009-1 Ed. 2.2 b IEC 61009-1 Ed. 2.2 b:2006 Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-2-1 Ed. 1.0 b IEC 61009-2-1 Ed. 1.0 b:1991 Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to
RCBO's functionally independen
IEC 61009-2-2 Ed. 1.0 b IEC 61009-2-2 Ed. 1.0 b:1991 Residual current operated circuit-breakers with integral
overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to
RCBO's functionally dependent
IEC 61021-1 Ed. 1.0 b IEC 61021-1 Ed. 1.0 b:1990 Laminated core packages for transformers and inductors
used in telecommunication and electronic equipment - Part 1: Dimensions
IEC 61021-2 Ed. 1.0 b IEC 61021-2 Ed. 1.0 b:1995 Laminated core packages for transformers and inductors for
use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE2
laminations
IEC 61034-1 Ed. 3.0 b IEC 61034-1 Ed. 3.0 b:2005 Measurement of smoke density of cables burning under
defined conditions - Part 1: Test apparatus
IEC 61039 Ed. 2.0 b IEC 61039 Ed. 2.0 b:2008 Classification of insulating liquids
IEC 61047 Ed. 2.0 b IEC 61047 Ed. 2.0 b:2004 DC or AC supplied electronic step-down convertors for
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 61067-1 Ed. 1.0 b IEC 61067-1 Ed. 1.0 b:1991 Specification for glass and glass polyester fibre woven
tapes - Part 1: Definitions, classification and general requirements
IEC 61067-3-1 Ed. 1.0 b IEC 61067-3-1 Ed. 1.0 b:1995 Glass and glass polyester fibre woven tapes - Part 3:
Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes
IEC 61068-1 Ed. 1.0 b IEC 61068-1 Ed. 1.0 b:1991 Specification for polyester fibre woven tapes - Part 1:
Definitions, designation and general requirements
IEC 61068-3-1 Ed. 2.0 b IEC 61068-3-1 Ed. 2.0 b:1995 Polyester fibre woven tapes - Part 3: Specifications for
individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms
IEC 61068-3-1 Ed. 2.0 b Cor.1 IEC 61068-3-1 Ed. 2.0 b Cor.1:1998 Corrigendum 1 - Polyester fibre woven
tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless
looms
IEC 61082-1 Ed. 2.0 b IEC 61082-1 Ed. 2.0 b:2006 Preparation of documents used in electrotechnology - Part 1:
Rules
IEC 61084-1 Amd.1 Ed. 1.0 b IEC 61084-1 Amd.1 Ed. 1.0 b:1993 Amendment No. 1
IEC 61084-1 Ed. 1.0 b IEC 61084-1 Ed. 1.0 b:1991 Cable trunking and ducting systems for electrical
installations - Part 1: General requirements
IEC 61084-2-1 Ed. 1.0 b IEC 61084-2-1 Ed. 1.0 b:1996 Cable trunking and ducting systems for electrical
installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for
mounting on walls or ceilings
IEC 61084-2-2 Ed. 1.0 b IEC 61084-2-2 Ed. 1.0 b:2003 Cable trunking and ducting systems for electrical
installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for
underfloor and flushfloor installati
IEC 61084-2-4 Ed. 1.0 b IEC 61084-2-4 Ed. 1.0 b:1996 Cable trunking and ducting systems for electrical
installations - Part 2: Particular requirements - Section 4: Service poles
IEC 61086-1 Ed. 2.0 b IEC 61086-1 Ed. 2.0 b:2004 Coatings for loaded printed wire boards (conformal
coatings) - Part 1: Definitions, classification and general requirements
IEC 61086-2 Ed. 2.0 b IEC 61086-2 Ed. 2.0 b:2004 Coatings for loaded printed wire boards (conformal
coatings) - Part 2: Methods of test
IEC 61086-2 Ed. 2.0 b Cor.1 IEC 61086-2 Ed. 2.0 b Cor.1:2005 Corrigendum 1 - Coatings for loaded printed
wire boards (conformal coatings) - Part 2: Methods of test
IEC 61086-3-1 Ed. 2.0 b IEC 61086-3-1 Ed. 2.0 b:2004 Coatings for loaded printed wire boards (conformal
coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet
lock - Characteristic impedance 50 ohm (type
IEC 61175 Ed. 2.0 b IEC 61175 Ed. 2.0 b:2005 Industrial systems, installations and equipment and industrial
products - Designation of signals
IEC 61179 Ed. 1.0 b IEC 61179 Ed. 1.0 b:1993 Helical-scan digital composite video cassette recording system
using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
IEC 61181 Ed. 2.0 b IEC 61181 Ed. 2.0 b:2007 Mineral oil-filled electrical equipment - Application of
dissolved gas analysis (DGA) to factory tests on electrical equipment
IEC 61184 Ed. 3.0 b IEC 61184 Ed. 3.0 b:2008 Bayonet lampholders
IEC 61184 Ed. 3.0 b Cor.1 IEC 61184 Ed. 3.0 b Cor.1:2009 Corrigendum 1 - Bayonet lampholders
IEC 61185 Ed. 2.0 en IEC 61185 Ed. 2.0 en:2005 Ferrite cores (ETD-cores) intended for use in power supply
applications - Dimensions
IEC 61195 Ed. 2.0 b IEC 61195 Ed. 2.0 b:1999 Double-capped fluorescent lamps - Safety specifications
IEC 61197 Ed. 1.0 b IEC 61197 Ed. 1.0 b:1993 Insulating liquids - Linear flame propagation - Test method
using a glass-fibre tape
IEC 61199 Ed. 2.0 b IEC 61199 Ed. 2.0 b:1999 Single-capped fluorescent lamps - Safety specifications
IEC 61203 Ed. 1.0 b IEC 61203 Ed. 1.0 b:1992 Synthetic organic esters for electrical purposes - Guide for
maintenance of transformer esters in equipment
IEC 61204 Amd.1 Ed. 1.0 b IEC 61204 Amd.1 Ed. 1.0 b:2001 Amendment 1 Low-voltage power supply
devices, d.c. output - Performance characteristics
IEC 61204 Ed. 1.1 b IEC 61204 Ed. 1.1 b:2001 Low-voltage power supply devices, d.c. output - Performance
characteristics
IEC 61204-3 Ed. 1.0 b IEC 61204-3 Ed. 1.0 b:2000 Low-voltage power supplies, d.c. output - Part 3:
Electromagnetic compatibility (EMC)
IEC 61204-6 Ed. 1.0 b IEC 61204-6 Ed. 1.0 b:2000 Low-voltage power supplies, d.c. output - Part 6:
Requirements for low-voltage power supplies of assessed performance
IEC 61204-7 Ed. 1.0 b IEC 61204-7 Ed. 1.0 b:2006 Low-voltage power supplies, d.c. output - Part 7: Safety
requirements
IEC 61210 Ed. 1.0 b IEC 61210 Ed. 1.0 b:1993 Connecting devices - Flat quick-connect terminations for
electrical copper conductors - Safety requirements
IEC 61211 Ed. 2.0 b IEC 61211 Ed. 2.0 b:2004 Insulators of ceramic material or glass for overhead lines with a
nominal voltage greater than 1 000 V - Impulse puncture testing in air
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 61212-1 Ed. 2.0 en IEC 61212-1 Ed. 2.0 en:2006 Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and
general requirements
IEC 61212-2 Ed. 2.0 b IEC 61212-2 Ed. 2.0 b:2006 Insulating materials - Industrial rigid round laminated tubes
and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 61212-3-1 Ed. 2.0 en IEC 61212-3-1 Ed. 2.0 en:2006 Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual
materials - Sheet 1: Round laminate
IEC 61212-3-2 Ed. 2.0 en IEC 61212-3-2 Ed. 2.0 en:2006 Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual
materials - Sheet 2: Round laminate
IEC 61212-3-3 Ed. 2.0 en IEC 61212-3-3 Ed. 2.0 en:2006 Insulating materials - Industrial rigid round laminated
tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual
materials - Sheet 3: Round laminate
IEC 61219 Ed. 1.0 b IEC 61219 Ed. 1.0 b:1993 Live working - Earthing or earthing and short-circuiting
equipment using lances as a short-circuiting device - Lance earthing
IEC 61221 Ed. 2.0 b IEC 61221 Ed. 2.0 b:2004 Petroleum products and lubricants - Triaryl phosphate ester
turbine control fluids (category ISO-L-TCD) - Specifications
IEC 61229 Ed. 1.2 b IEC 61229 Ed. 1.2 b:2002 Rigid protective covers for live working on a.c. installations
IEC 61230 Ed. 2.0 b IEC 61230 Ed. 2.0 b:2008 Live working - Portable equipment for earthing or earthing and
short-circuiting
IEC 61232 Ed. 1.0 b IEC 61232 Ed. 1.0 b:1993 Aluminium-clad steel wires for electrical purposes
IEC 61235 Ed. 1.0 b IEC 61235 Ed. 1.0 b:1993 Live working - Insulating hollow tubes for electrical purposes
IEC 61236 Ed. 1.0 b IEC 61236 Ed. 1.0 b:1993 Saddles, pole clamps (stick clamps) and accessories for live
working
IEC 61238-1 Ed. 2.0 b IEC 61238-1 Ed. 2.0 b:2003 Compression and mechanical connectors for power cables
for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
IEC 61241-0 Ed. 1.0 b IEC 61241-0 Ed. 1.0 b:2004 Electrical apparatus for use in the presence of combustible
dust - Part 0: General requirements
IEC 61241-0 Ed. 1.0 b Cor.1 IEC 61241-0 Ed. 1.0 b Cor.1:2005 Corrigendum 1 - Electrical apparatus for use in
the presence of combustible dust - Part 0: General requirements
IEC 61241-11 Ed. 1.0 b IEC 61241-11 Ed. 1.0 b:2005 Electrical apparatus for use in the presence of
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the
capability approval procedure
IEC 61248-3 Ed. 1.0 b IEC 61248-3 Ed. 1.0 b:1996 Transformers and inductors for use in electronic and
telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the
capability approval procedure
IEC 61248-4 Ed. 1.0 b IEC 61248-4 Ed. 1.0 b:1996 Transformers and inductors for use in electronic and
telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power
supplies (SMPS) on the basis of the ca
IEC 61248-5 Ed. 1.0 b IEC 61248-5 Ed. 1.0 b:1996 Transformers and inductors for use in electronic and
telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the
capability approval procedure
IEC 61248-6 Ed. 1.0 b IEC 61248-6 Ed. 1.0 b:1996 Transformers and inductors for use in electronic and
telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability
approval procedure
IEC 61248-7 Ed. 1.0 b IEC 61248-7 Ed. 1.0 b:1997 Transformers and inductors for use in electronic and
telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate
frequency transformers on the basis of
IEC 61284 Ed. 2.0 b IEC 61284 Ed. 2.0 b:1997 Overhead lines - Requirements and tests for fittings
IEC 61293 Ed. 1.0 b IEC 61293 Ed. 1.0 b:1994 Marking of electrical equipment with ratings related to
electrical supply - Safety requirements
IEC 61316 Ed. 2.0 b IEC 61316 Ed. 2.0 b:1999 Industrial cable reels
IEC 61325 Ed. 1.0 b IEC 61325 Ed. 1.0 b:1995 Insulators for overhead lines with a nominal voltage above 1000
V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
IEC 61332 Ed. 2.0 en IEC 61332 Ed. 2.0 en:2005 Soft ferrite material classification
IEC 61333 Ed. 1.0 b IEC 61333 Ed. 1.0 b:1996 Marking on U and E ferrite cores
IEC 61334-3-1 Ed. 1.0 b IEC 61334-3-1 Ed. 1.0 b:1998 Distribution automation using distribution line carrier
systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels
IEC 61334-3-21 Ed. 1.0 b IEC 61334-3-21 Ed. 1.0 b:1996 Distribution automation using distribution line
carrier systems - Part 3: Mains signalling requirements - Section 21: MV phase-to-phase isolated capacitive
coupling device
IEC 61334-3-22 Ed. 1.0 b IEC 61334-3-22 Ed. 1.0 b:2001 Distribution automation using distribution line
carrier systems - Part 3-22: Mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
coupling devices
IEC 61334-4-1 Ed. 1.0 b IEC 61334-4-1 Ed. 1.0 b:1996 Distribution automation using distribution line carrier
systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system
IEC 61334-4-32 Ed. 1.0 b IEC 61334-4-32 Ed. 1.0 b:1996 Distribution automation using distribution line
carrier systems - Part 4: Data communication protocols - Section 32: Data link layer - Logical link control (LLC)
IEC 61334-4-33 Ed. 1.0 b IEC 61334-4-33 Ed. 1.0 b:1998 Distribution automation using distribution line
carrier systems - Part 4-33: Data communication protocols - Data link layer - Connection oriented protocol
IEC 61334-4-41 Ed. 1.0 b IEC 61334-4-41 Ed. 1.0 b:1996 Distribution automation using distribution line
carrier systems - Part 4: Data communication protocols - Section 41: Application protocol - Distribution line
message specification
IEC 61334-4-42 Ed. 1.0 b IEC 61334-4-42 Ed. 1.0 b:1996 Distribution automation using distribution line
carrier systems - Part 4: Data communication protocols - Section 42: Application protocols - Application layer
IEC 61334-4-61 Ed. 1.0 b IEC 61334-4-61 Ed. 1.0 b:1998 Distribution automation using distribution line
carrier systems - Part 4-61: Data communication protocols - Network layer - Connectionless protocol
IEC 61334-6 Ed. 1.0 b IEC 61334-6 Ed. 1.0 b:2000 Distribution automation using distribution line carrier
systems - Part 6: A-XDR encoding rule
IEC 61347-1 Ed. 2.0 b IEC 61347-1 Ed. 2.0 b:2007 Lamp controlgear - Part 1: General and safety requirements
IEC 61347-2-1 Amd.1 Ed. 1.0 b IEC 61347-2-1 Amd.1 Ed. 1.0 b:2005 Amendment 1 - Lamp controlgear - Part
2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-1 Ed. 1.1 b IEC 61347-2-1 Ed. 1.1 b:2006 Lamp controlgear - Part 2-1: Particular requirements
for starting devices (other than glow starters)
IEC 61347-2-10 Amd.1 Ed. 1.0 b IEC 61347-2-10 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Lamp controlgear -
Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold
start tubular discharge lamps (neon tubes)
IEC 61347-2-10 Ed. 1.1 b IEC 61347-2-10 Ed. 1.1 b:2009 Lamp controlgear - Part 2-10: Particular
requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge
lamps (neon tubes)
IEC 61347-2-11 Ed. 1.0 b IEC 61347-2-11 Ed. 1.0 b:2001 Lamp controlgear - Part 2-11: Particular
requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-12 Ed. 1.0 b IEC 61347-2-12 Ed. 1.0 b:2005 Lamp controlgear - Part 2-12: Particular
requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-13 Ed. 1.0 b IEC 61347-2-13 Ed. 1.0 b:2006 Lamp controlgear - Part 2-13: Particular
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
requirements for d.c. or a.c. supplied electronic controlgear for LED modules
IEC 61347-2-2 Amd.1 Ed. 1.0 b IEC 61347-2-2 Amd.1 Ed. 1.0 b:2005 Amendment 1 - Lamp controlgear - Part
2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-2 Amd.2 Ed. 1.0 b IEC 61347-2-2 Amd.2 Ed. 1.0 b:2006 Amendment 2 - Lamp controlgear - Part
2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-2 Ed. 1.2 b IEC 61347-2-2 Ed. 1.2 b:2006 Lamp controlgear - Part 2-2: Particular requirements
for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-3 Amd.1 Ed. 1.0 b IEC 61347-2-3 Amd.1 Ed. 1.0 b:2004 Amendment 1 - Lamp controlgear - Part
2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
IEC 61347-2-3 Amd.2 Ed. 1.0 b IEC 61347-2-3 Amd.2 Ed. 1.0 b:2006 Amendment 2 - Lamp controlgear - Part
2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
IEC 61347-2-3 Ed. 1.1 b IEC 61347-2-3 Ed. 1.1 b:2004 Lamp controlgear - Part 2-3: Particular requirements
for a.c. supplied electronic ballasts for fluorescent lamps
IEC 61347-2-4 Ed. 1.0 b IEC 61347-2-4 Ed. 1.0 b:2000 Lamp controlgear - Part 2-4: Particular requirements
for d.c. supplied electronic ballasts for general lighting
IEC 61347-2-5 Ed. 1.0 b IEC 61347-2-5 Ed. 1.0 b:2000 Lamp controlgear - Part 2-5: Particular requirements
for d.c. supplied electronic ballasts for public transport lighting
IEC 61347-2-6 Ed. 1.0 b IEC 61347-2-6 Ed. 1.0 b:2000 Lamp controlgear - Part 2-6: Particular requirements
for d.c. supplied electronic ballasts for aircraft lighting
IEC 61347-2-7 Ed. 2.0 b IEC 61347-2-7 Ed. 2.0 b:2006 Lamp controlgear - Part 2-7: Particular requirements
for d.c. supplied electronic ballasts for emergency lighting
IEC 61347-2-8 Amd.1 Ed. 1.0 b IEC 61347-2-8 Amd.1 Ed. 1.0 b:2006 Amendment 1 - Lamp controlgear - Part
2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8 Ed. 1.1 b IEC 61347-2-8 Ed. 1.1 b:2006 Lamp controlgear - Part 2-8: Particular requirements
for ballasts for fluorescent lamps
IEC 61347-2-9 Amd.1 Ed. 1.0 b IEC 61347-2-9 Amd.1 Ed. 1.0 b:2003 Amendment 1 - Lamp controlgear - Part
2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9 Amd.2 Ed. 1.0 b IEC 61347-2-9 Amd.2 Ed. 1.0 b:2006 Amendment 2 - Lamp controlgear - Part
2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-9 Ed. 1.1 b IEC 61347-2-9 Ed. 1.1 b:2003 Lamp controlgear - Part 2-9: Particular requirements
for ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61378-1 Ed. 1.0 b IEC 61378-1 Ed. 1.0 b:1997 Convertor transformers - Part 1: Transformers for industrial
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
applications
IEC 61378-2 Ed. 1.0 b IEC 61378-2 Ed. 1.0 b:2001 Convertor transformers - Part 2: Transformers for HVDC
applications
IEC 61378-3 Ed. 1.0 b IEC 61378-3 Ed. 1.0 b:2006 Converter transformers - Part 3: Application guide
IEC 61386-1 Ed. 2.0 b IEC 61386-1 Ed. 2.0 b:2008 Conduit systems for cable management - Part 1: General
requirements
IEC 61386-21 Ed. 1.0 b IEC 61386-21 Ed. 1.0 b:2002 Conduit systems for cable management - Part 21:
Particular requirements - Rigid conduit systems
IEC 61386-22 Ed. 1.0 b IEC 61386-22 Ed. 1.0 b:2002 Conduit Systems for cable management - Part 22:
Particular requirements - Pliable conduit systems
IEC 61386-23 Ed. 1.0 b IEC 61386-23 Ed. 1.0 b:2002 Conduit systems for cable management - Part 23:
Particular requirements - Flexible conduit systems
IEC 61386-24 Ed. 1.0 b IEC 61386-24 Ed. 1.0 b:2004 Conduit systems for cable management - Part 24:
Particular requirements - Conduit systems buried underground
IEC 61395 Ed. 1.0 b IEC 61395 Ed. 1.0 b:1998 Overhead electrical conductors - Creep test procedures for
stranded conductors
IEC 61427 Ed. 2.0 b IEC 61427 Ed. 2.0 b:2005 Secondary cells and batteries for photovoltaic energy systems
(PVES) - General requirements and methods of test
IEC 61434 Ed. 1.0 b IEC 61434 Ed. 1.0 b:1996 Secondary cells and batteries containing alkaline or other
non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards
IEC 61439-1 Ed. 1.0 b IEC 61439-1 Ed. 1.0 b:2009 Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
IEC 61439-2 Ed. 1.0 b IEC 61439-2 Ed. 1.0 b:2009 Low-voltage switchgear and controlgear assemblies - Part 2:
Power switchgear and controlgear assemblies
IEC 61443 Amd.1 Ed. 1.0 b IEC 61443 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Short-circuit temperature limits
of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC 61443 Ed. 1.1 b IEC 61443 Ed. 1.1 b:2008 Short-circuit temperature limits of electric cables with rated
voltages above 30 kV (Um = 36 kV)
IEC 61462 Ed. 1.0 b IEC 61462 Ed. 1.0 b:2007 Composite hollow insulators - Pressurized and unpressurized
insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods,
acceptance criteria and des
IEC 61466-1 Ed. 1.0 b IEC 61466-1 Ed. 1.0 b:1997 Composite string insulator units for overhead lines with a
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings
IEC 61466-1 Ed. 1.0 b Cor.1 IEC 61466-1 Ed. 1.0 b Cor.1:2007 Corrigendum 1 - Composite string insulator
units for overhead lines with a nominal voltage greater than 1 000 V - Part 1: Standard strength classes and end
fittings
IEC 61466-2 Amd.1 Ed. 1.0 b IEC 61466-2 Amd.1 Ed. 1.0 b:2002 Amendment 1
IEC 61466-2 Ed. 1.1 b IEC 61466-2 Ed. 1.1 b:2002 Composite string insulator units for overhead lines with a
nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
IEC 61467 Ed. 1.0 b IEC 61467 Ed. 1.0 b:2008 Insulators for overhead lines - Insulator strings and sets for lines
with a nominal voltage greater than 1 000 V - AC power arc tests
IEC 61497 Ed. 1.0 b IEC 61497 Ed. 1.0 b:1998 Nuclear power plants - Electrical interlocks for functions
important to safety - Recommendations for design and implementation
IEC 61508-SER Ed. 1.0 b IEC 61508-SER Ed. 1.0 b:2005 Functional safety of
electrical/electronic/programmable electronic safety-related systems - ALL PARTS
IEC 61534-1 Ed. 1.0 b IEC 61534-1 Ed. 1.0 b:2003 Powertrack systems - Part 1: General requirements
IEC 61534-21 Ed. 1.0 b IEC 61534-21 Ed. 1.0 b:2006 Powertrack systems - Part 21: Particular requirements for
powertrack systems intended for wall and ceiling mounting
IEC 61534-22 Ed. 1.0 b IEC 61534-22 Ed. 1.0 b:2009 Powertrack systems - Part 22: Particular requirements for
powertrack systems intended for on floor or under floor installation
IEC 61535 Ed. 1.0 b IEC 61535 Ed. 1.0 b:2009 Installation couplers intended for permanent connection in fixed
installations
IEC 61537 Ed. 2.0 b IEC 61537 Ed. 2.0 b:2006 Cable management - Cable tray systems and cable ladder
systems
IEC 61540 Amd.1 Ed. 1.0 b IEC 61540 Amd.1 Ed. 1.0 b:1998 Amendment 1
IEC 61540 Ed. 1.1 b IEC 61540 Ed. 1.1 b:1999 Electrical accessories - Portable residual current devices
without integral overcurrent protection for household and similar use (PRCDs)
IEC 61543 Amd.1 Ed. 1.0 b IEC 61543 Amd.1 Ed. 1.0 b:2004 Amendment 1 - Residual current-operated
protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61543 Amd.2 Ed. 1.0 b IEC 61543 Amd.2 Ed. 1.0 b:2005 Amendment 2 - Residual current-operated
protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61543 Ed. 1.0 b IEC 61543 Ed. 1.0 b:1995 Residual current-operated protective devices (RCDs) for
household and similar use - Electromagnetic compatibility
IEC 61545 Ed. 1.0 b IEC 61545 Ed. 1.0 b:1996 Connecting devices - Devices for the connection of aluminium
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
IEC 61547 Ed. 2.0 b IEC 61547 Ed. 2.0 b:2009 Equipment for general lighting purposes - EMC immunity
requirements
IEC 61549 Amd.1 Ed. 2.0 b IEC 61549 Amd.1 Ed. 2.0 b:2005 Amendment 1 - Miscellaneous lamps
IEC 61549 Ed. 2.1 b IEC 61549 Ed. 2.1 b:2005 Miscellaneous lamps
IEC 61558-1 Amd.1 Ed. 2.0 b IEC 61558-1 Amd.1 Ed. 2.0 b:2009 Amendment 1 - Safety of power transformers,
power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-1 Ed. 2.0 b Cor.1 IEC 61558-1 Ed. 2.0 b Cor.1:2008 Corrigendum 1 - Safety of power transformers,
power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-1 Ed. 2.1 b IEC 61558-1 Ed. 2.1 b:2009 Safety of power transformers, power supplies, reactors and
similar products - Part 1: General requirements and tests
IEC 61558-2-1 Ed. 2.0 b IEC 61558-2-1 Ed. 2.0 b:2007 Safety of power transformers, power supplies, reactors
and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies
incorporating separating trans
IEC 61558-2-12 Ed. 1.0 b IEC 61558-2-12 Ed. 1.0 b:2001 Safety of power transformers, power supply units
and similar devices - Part 2-12: Particular requirements for constant voltage transformers
IEC 61558-2-13 Ed. 2.0 b IEC 61558-2-13 Ed. 2.0 b:2009 Safety of transformers, reactors, power supply units
and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto
transformers and power supply units
IEC 61558-2-15 Ed. 1.0 b IEC 61558-2-15 Ed. 1.0 b:1999 Safety of power transformers, power supply units
and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations
IEC 61558-2-16 Ed. 1.0 b IEC 61558-2-16 Ed. 1.0 b:2009 Safety of transformers, reactors, power supply units
and similar products for voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode
power supply units and transformers
IEC 61558-2-2 Ed. 2.0 b IEC 61558-2-2 Ed. 2.0 b:2007 Safety of power transformers, power supplies, reactors
and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies
incorporating control transformer
IEC 61558-2-20 Ed. 1.0 b IEC 61558-2-20 Ed. 1.0 b:2000 Safety of power transformers, power supply units
and similar devices - Part 2-20: Particular requirements for small reactors
IEC 61558-2-23 Ed. 1.0 b IEC 61558-2-23 Ed. 1.0 b:2000 Safety of power transformers, power supply units
and similar devices - Part 2-23: Particular requirements for transformers for construction sites
IEC 61558-2-3 Ed. 1.0 b IEC 61558-2-3 Ed. 1.0 b:1999 Safety of power transformers, power supply units and
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners
IEC 61558-2-4 Ed. 2.0 b IEC 61558-2-4 Ed. 2.0 b:2009 Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating
transformers and power supply u
IEC 61558-2-5 Ed. 1.0 b IEC 61558-2-5 Ed. 1.0 b:1997 Safety of power transformers, power supply units and
similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units
IEC 61558-2-6 Ed. 2.0 b IEC 61558-2-6 Ed. 2.0 b:2009 Safety of transformers, reactors, power supply units and
similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety
isolating transformers and power s
IEC 61558-2-7 Ed. 2.0 b IEC 61558-2-7 Ed. 2.0 b:2007 Safety of power transformers, power supplies, reactors
and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
IEC 61558-2-8 Ed. 1.0 b IEC 61558-2-8 Ed. 1.0 b:1998 Safety of small power transformers, power supply units
and similar - Part 2-8: Particular requirements for bell and chime transformers
IEC 61558-2-9 Ed. 1.0 b IEC 61558-2-9 Ed. 1.0 b:2002 Safety of power transformers, power supply units and
similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten
filament lamps
IEC 61596 Ed. 1.0 b IEC 61596 Ed. 1.0 b:1995 Magnetic oxide EP-cores and associated parts for use in
inductors and transformers - Dimensions
IEC 61605 Ed. 2.0 b IEC 61605 Ed. 2.0 b:2005 Fixed inductors for use in electronic and telecommunication
equipment - Marking codes
IEC 61609 Ed. 1.0 b IEC 61609 Ed. 1.0 b:1996 Microwave ferrite components - Guide for the drafting of
specifications
IEC 61628-1 Ed. 1.0 b IEC 61628-1 Ed. 1.0 b:1997 Corrugated pressboard and presspaper for electrical
purposes - Part 1: Definitions, designations and general requirements
IEC 61628-2 Amd.1 Ed. 1.0 b IEC 61628-2 Amd.1 Ed. 1.0 b:2007 Amendment 1 - Corrugated pressboard and
presspaper for electrical purposes - Part 2: Methods of test
IEC 61628-2 Ed. 1.1 b IEC 61628-2 Ed. 1.1 b:2007 Corrugated pressboard and presspaper for electrical
purposes - Part 2: Methods of test
IEC 61629-1 Ed. 1.0 b IEC 61629-1 Ed. 1.0 b:1996 Aramid pressboard for electrical purposes - Part 1:
Definitions, designations and general requirements
IEC 61629-2 Ed. 1.0 b IEC 61629-2 Ed. 1.0 b:1996 Aramid pressboard for electrical purposes - Part 2: Methods
of test
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 61631 Ed. 1.0 b IEC 61631 Ed. 1.0 b:2001 Test method for the mechanical strength of cores made of
magnetic oxides
IEC 61642 Ed. 1.0 b IEC 61642 Ed. 1.0 b:1997 Industrial a.c. networks affected by harmonics - Application of
filters and shunt capacitors
IEC 61643-1 Ed. 2.0 b IEC 61643-1 Ed. 2.0 b:2005 Low-voltage surge protective devices - Part 1: Surge
protective devices connected to low-voltage power distribution systems - Requirements and tests
IEC 61643-12 Ed. 2.0 b IEC 61643-12 Ed. 2.0 b:2008 Low-voltage surge protective devices - Part 12: Surge
protective devices connected to low-voltage power distribution systems - Selection and application principles
IEC 61643-21 Amd.1 Ed. 1.0 b IEC 61643-21 Amd.1 Ed. 1.0 b:2008 Amendment 1 - Low voltage surge
protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks
- Performance requirements and testing methods
IEC 61643-21 Ed. 1.1 b IEC 61643-21 Ed. 1.1 b:2009 Low voltage surge protective devices - Part 21: Surge
protective devices connected to telecommunications and signalling networks - Performance requirements and
testing methods
IEC 61643-22 Ed. 1.0 b IEC 61643-22 Ed. 1.0 b:2004 Low-voltage surge protective devices - Part 22: Surge
protective devices connected to telecommunications and signalling networks - Selection and application
principles
IEC 61773 Ed. 1.0 b IEC 61773 Ed. 1.0 b:1996 Overhead lines - Testing of foundations for structures
IEC 61788-10 Ed. 2.0 b IEC 61788-10 Ed. 2.0 b:2006 Superconductivity - Part 10: Critical temperature
measurement - Critical temperature of composite superconductors by a resistance method
IEC 61788-12 Ed. 1.0 b IEC 61788-12 Ed. 1.0 b:2002 Superconductivity - Part 12: Matrix to superconductor
volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
IEC 61788-5 Ed. 1.0 en IEC 61788-5 Ed. 1.0 en:2000 Superconductivity - Part 5: Matrix to superconductor
volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
IEC 61788-6 Ed. 2.0 en IEC 61788-6 Ed. 2.0 en:2008 Superconductivity - Part 6: Mechanical properties
measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
IEC 61797-1 Ed. 1.0 b IEC 61797-1 Ed. 1.0 b:1996 Transformers and inductors for use in telecommunication
and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores
IEC 61800-1 Ed. 1.0 b IEC 61800-1 Ed. 1.0 b:1997 Adjustable speed electrical power drive systems - Part 1:
General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems
IEC 61800-2 Ed. 1.0 b IEC 61800-2 Ed. 1.0 b:1998 Adjustable speed electrical power drive systems - Part 2:
General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
IEC 61800-3 Ed. 2.0 b IEC 61800-3 Ed. 2.0 b:2004 Adjustable speed electrical power drive systems - Part 3:
EMC requirements and specific test methods
IEC 61800-4 Ed. 1.0 b IEC 61800-4 Ed. 1.0 b:2002 Adjustable speed electrical power drive systems - Part 4:
General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding
35 kV
IEC 61800-5-1 Ed. 2.0 b IEC 61800-5-1 Ed. 2.0 b:2007 Adjustable speed electrical power drive systems - Part
5-1: Safety requirements - Electrical, thermal and energy
IEC 61800-5-2 Ed. 1.0 en IEC 61800-5-2 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems -
Part 5-2: Safety requirements - Functional
IEC 61800-7-1 Ed. 1.0 en IEC 61800-7-1 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems -
Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
IEC 61800-7-201 Ed. 1.0 en IEC 61800-7-201 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
IEC 61800-7-202 Ed. 1.0 en IEC 61800-7-202 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
IEC 61800-7-203 Ed. 1.0 en IEC 61800-7-203 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification
IEC 61800-7-204 Ed. 1.0 en IEC 61800-7-204 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification
IEC 61800-7-301 Ed. 1.0 en IEC 61800-7-301 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to
network technologies
IEC 61800-7-302 Ed. 1.0 en IEC 61800-7-302 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to
network technologies
IEC 61800-7-303 Ed. 1.0 en IEC 61800-7-303 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to
network technologies
IEC 61800-7-304 Ed. 1.0 en IEC 61800-7-304 Ed. 1.0 en:2007 Adjustable speed electrical power drive systems
- Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to
network technologies
IEC 61803 Ed. 1.0 b IEC 61803 Ed. 1.0 b:1999 Determination of power losses in high-voltage direct current
hench2004@sina.com | Quote@findstandards.info
http://www.findstandards.info
hench2004@sina.com | Quote@findstandards.info