Beruflich Dokumente
Kultur Dokumente
IEC 60034-12 Ed. Rotating electrical machines - Part 12: Starting performance of single-
2.0 b:2002 speed three-phase cage induction motors
IEC 60034-15 Ed. Rotating electrical machines - Part 15: Impulse voltage withstand levels of
2.0 b:1995 rotating a.c. machines with form-wound stator coils
IEC 60034- 16-1 Rotating electrical machines - Part 16: Excitation systems for synchronous
Ed. 1.0 b:1991 machines - Chapter 1: Definitions
IEC 60034- 18-1 Rotating electrical machines - Part 18: Functional evaluation of insulation
Ed. 1.0 b:1992 systems - Section 1: General guidelines
IEC 60034-18-21
Amd.1 Ed. 1.0 Amendment No. 1
b:1994
IEC 60034-18-21
Amd.2 Ed. 1.0 Amendment No. 2
b:1996
IEC 60034-18-31
Amd.1 Ed. 1.0 Amendment No. 1
b:1996
systems - Section 31: Test procedures for form-wound windings - Thermal
IEC 60034-18-31 evaluation and classification of insulation systems used in machines up to
Ed. 1.0 b:1992 and including 50 MVA and 15 kV
IEC 60034-19 Ed. Rotating electrical machines - Part 19: Specific test methods for d.c.
1.0 b:1995 machines on conventional and rectifier-fed supplies
IEC 60034-2
Amd.1 Ed. 3.0 Amendment No. 1
b:1995
IEC 60034-2
Amd.2 Ed. 3.0 Amendment No. 2
b:1996
IEC 60034-3 Ed. Rotating electrical machines - Part 3: Specific requirements for turbine-
4.0 b:1988 type synchronous machines
IEC 60034-4
Amd.1 Ed. 2.0 Amendment No. 1
b:1995
IEC 60034-4 Ed. Rotating electrical machines. Part 4: Methods for determining synchronous
2.0 b:1985 machine quantities from tests
IEC 60034-8 Ed. Rotating electrical machines - Part 8: Terminal markings and direction of
2.0 b:2002 rotation
IEC 60055-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1989
Page 2
IEC 60059 Ed. 2.0
IEC standard current ratings
b:1999
Lamp caps and holders together with gauges for the control of
IEC 60061-1 Ed. interchangeability and safety - Part 1: Lamp caps
3.4 b:2005
Lamp caps and holders together with gauges for the control of
IEC 60061-2 Ed. interchangeability and safety - Part 2: Lampholders
3.4 b:2005
Lamp caps and holders together with gauges for the control of
IEC 60061-3 Ed. interchangeability and safety - Part 3: Gauges
3.4 b:2005
Lamp caps and holders together with gauges for the control of
IEC 60061-4 Ed. interchangeability and safety - Part 4: Guidelines and general information
1.9 b:2005
IEC 60064 Ed. 6.0 Tungsten filament lamps for domestic and similar general lighting purposes
b:1993 - Performance requirements
IEC 60072-1 Ed. Dimensions and output series for rotating electrical machines - Part 1:
6.0 b:1991 Frame numbers 56 to 400 and flange numbers 55 to 1080
IEC 60072-2 Ed. Dimensions and output series for rotating electrical machines - Part 2:
1.0 b:1990 Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3 Ed. Dimensions and output series for rotating electrical machines - Part 3:
1.0 b:1994 Small built-in motors - Flange numbers BF10 to BF50
IEC 60076-1
Amd.1 Ed. 2.0 Amendment 1
b:1999
IEC 60076-3 Ed. Power transformers - Part 3: Insulation levels, dielectric tests and external
2.0 b:2000 clearances in air
IEC 60076-4 Ed. Power transformers - Part 4: Guide to the lightning impulse and switching
1.0 b:2002 impulse testing - Power transformers and reactors
Page 3
IEC 60076-5 Ed.
Power transformers - Part 5: Ability to withstand short circuit
2.0 b:2000
IEC 60077-1 Ed. Railway applications - Electric equipment for rolling stock - Part 1: General
1.0 b:1999 service conditions and general rules
IEC 60077-3 Ed. Railway applications - Electric equipment for rolling stock - Part 3:
1.0 b:2001 Electrotechnical components - Rules for d.c. circuit-breakers
IEC 60079-0 Ed. Electrical apparatus for explosive gas atmospheres - Part 0: General
4.0 b:2004 requirements
IEC 60079-1 Ed. Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof
5.0 b:2003 enclosures "d"
IEC 60079-10 Ed. Electrical apparatus for explosive gas atmospheres - Part 10:
4.0 b:2002 Classification of hazardous areas
IEC 60079-11 Ed. Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic
4.0 b:1999 safety "i"
IEC 60079-14 Ed. Electrical apparatus for explosive gas atmospheres - Part 14: Electrical
3.0 b:2002 installations in hazardous areas (other than mines)
IEC 60079-15 Ed. Electrical apparatus for explosive gas atmospheres - Part 15: Type of
2.0 en:2001 protection "n"
Electrical apparatus for explosive gas atmospheres - Part 19: Repair and
IEC 60079-19 Ed.
overhaul for apparatus used in explosive atmospheres (other than mines or
1.0 b:1993
explosives)
IEC 60079-2 Ed. Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized
4.0 b:2001 enclosures "p"
IEC 60079-25 Ed. Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically
1.0 b:2003 safe systems
IEC 60079-26 Ed. "Electrical apparatus for explosive gas atmospheres - Part 26:
1.0 b:2004 Construction, test and marking of Group II Zone 0 electrical apparatus "
IEC 60079-4
Amd.1 Ed. 2.0 Amendment No. 1
b:1995
IEC 60079-4 Ed. Electrical apparatus for explosive gas atmospheres. Part 4: Method of test
2.0 b:1975 for ignition temperature
Page 4
Electrical apparatus for explosive gas atmospheres - Part 4: Method of test
IEC 60079- 4A Ed.
for ignition temperature - First supplement. *Note.-This supplement applies
1.0 b:1970
also to the second edition of 1975
IEC 60079-5
"Amendment 1 - Electrical apparatus for explosive gas atmospheres - Part
Amd.1 Ed. 2.0
5: Powder filling ""q"""
b:2003
IEC 60079-5 Ed. Electrical apparatus for explosive gas atmospheres - Part 5: Powder filling
2.0 b:1997 "q"
IEC 60079-6 Ed. Electrical apparatus for explosive gas atmospheres - Part 6: Oil-immersion
2.0 b:1995 'o'
IEC 60079-7 Ed. Electrical apparatus for explosive gas atmospheres - Part 7: Increased
3.0 b:2001 safety "e"
IEC 60086-2
Amd.1 Ed. 10.0 Amendment 1
en:2001
IEC 60086-2
Amendment 2 - Primary batteries - Part 2: Physical and electrical
Amd.2 Ed. 10.0
specifications
en:2004
Electrical installations in ships - Part 353: Single and multicore non- radial
IEC 60092- 353 Ed.
field power cables with extruded solid insulation for rated voltages 1 kV
2.0 b:1995
and 3 kV
Page 5
IEC 60092- 359
Amd.1 Ed. 1.0 Amendment No. 1
b:1994
IEC 60092- 359 Ed. Electrical installations in ships - Part 359: Sheathing materials for
1.2 b:1999 shipboard power and telecommunication cables
IEC 60092- 376 Ed. Electrical installations in ships - Part 376: Cables for control and
2.0 en:2003 instrumentation circuits 150/250 V (300 V)
IEC 60095-1 Ed. LEAD-ACID STARTER BATTERIES - Part 1: General requirements and
6.0 b:2000 methods of test
IEC 60095-2
Amd.1 Ed. 3.0 Amendment No. 1
b:1991
IEC 60095-2
Amd.2 Ed. 3.0 Amendment No. 2
b:1993
IEC 60095-2 Ed. Lead-acid starter batteries. Part 2: Dimensions of batteries and
3.0 b:1984 dimensions and marking of terminals
IEC 60095-4
Amd.1 Ed. 1.0 Amendment No. 1 to IEC 95-4
b:1996
IEC 60095-4 Ed. Lead-acid starter batteries. Part 4: Dimensions of batteries for heavy
1.0 b:1989 trucks
IEC 60099-1
Amd.1 Ed. 3.0 Amendment 1
b:1999
IEC 60099-1 Ed. Surge arresters - Part 1: Non-linear resistor type gapped surge arresters
3.1 b:1999 for a.c. systems
IEC 60099-4 Ed. Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c.
2.0 b:2004 systems
IEC 60099-5
Amd.1 Ed. 1.0 Amendment 1
b:1999
IEC 60099-6 Ed. Surge arresters - Part 6: Surge arresters containing both series and
1.0 en:2002 parallel gapped structures - Rated 52 kV and less
IEC 60114 Ed. 1.0 Recommendation for heat-treated aluminium alloy busbar material of the
b:1959 aluminium-magnesium-silicon type
Page 6
IEC 60119 Ed. 1.0 Recommendations for polycrystalline semiconductor rectifier stacks and
b:1960 equipment
IEC 60121 Ed. 1.0 Recommendation for commercial annealed aluminium electrical conductor
b:1960 wire
IEC 60127-1
Amd.1 Ed. 1.0 Amendment 1
b:1999
IEC 60127-1
Amd.2 Ed. 1.0 Amendment 2
b:2002
IEC 60127-1 Ed. Miniature fuses - Part 1: Definitions for miniature fuses and general
1.2 b:2003 requirements for miniature fuse-links
IEC 60127-2
Amd.1 Ed. 2.0 Amendment 1 - Miniature fuses - Part 2: Cartridge fuse-links
b:2003
IEC 60127-3
Amd.1 Ed. 2.0 Amendment No. 1
b:1991
IEC 60127-3
Amd.2 Ed. 2.0 Amendment 2
b:2002
IEC 60127-5 Ed. Miniature fuses - Part 5: Guidelines for quality assessment of miniature
1.0 b:1988 fuse-links
IEC 60127-6
Amd.1 Ed. 1.0 Amendment No. 1 to IEC 127-6
b:1996
IEC 60127-6
Amd.2 Ed. 1.0 Amendment 2
b:2002
Page 7
IEC 60137 Ed. 5.0
Insulated bushings for alternating voltages above 1000 V
b:2003
IEC 60141-1
Amd.1 Ed. 3.0 Amendment No. 1
b:1995
IEC 60141-1
Amd.2 Ed. 3.0 Amendment 2
b:1998
IEC 60141-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1967
IEC 60141-3
Amd.1 Ed. 1.0 Amendment No. 1
b:1967
IEC 60141-4
Amd.1 Ed. 1.0 Amendment No. 1
b:1990
IEC 60146- 1-1 Ed. Semiconductor convertors - General requirements and line commutated
3.0 b:1991 convertors - Part 1-1: Specifications of basic requirements
IEC 60146- 1-3 Ed. Semiconductor convertors - General requirements and line commutated
3.0 b:1991 convertors - Part 1-3: Transformers and reactors
IEC 60152 Ed. 1.0 Identification by hour numbers of the phase conductors of 3-phase electric
b:1963 systems
IEC 60167 Ed. 1.0 Methods of test for the determination of the insulation resistance of solid
b:1964 insulating materials
IEC 60168 Ed. 4.2 Tests on indoor and outdoor post insulators of ceramic material or glass
b:2001 for systems with nominal voltages greater than 1000 V
Page 8
IEC 60172 Amd.1
Amendment No. 1
Ed. 3.0 b:1997
IEC 60172 Ed. 3.0 Test procedure for the determination of the temperature index of
b:1987 enamelled winding wires
IEC 60189-1
Amd.3 Ed. 2.0 Amendment No. 3
b:1992
IEC 60189-1 Ed. Low-frequency cables and wires with PVC insulation and PVC sheath. Part
2.0 b:1986 1: General test and measuring methods
IEC 60189-2
Amd.1 Ed. 3.0 Amendment No. 1
b:1989
IEC 60189-2
Amd.2 Ed. 3.0 Amendment No. 2
b:1996
IEC 60189-2 Ed. Low-frequency cables and wires with PVC insulation and PVC sheath. Part
3.0 b:1981 2: Cables in pairs, triples, quads and quintuples for inside installations
IEC 60189-3
Amd.1 Ed. 3.0 Amendment No. 1
b:1989
Low-frequency cables and wires with PVC insulation and PVC sheath. Part
IEC 60189-3 Ed.
3: Equipment wires with solid or stranded conductor, PVC insulated, in
3.0 b:1988
singles, pairs and triples
IEC 60197 Ed. 1.0 High-voltage connecting wire with flame retarding insulation for use in
b:1965 television receivers
IEC 60204-1
Amd.1 Ed. 4.0 Amendment 1
b:1999
IEC 60204-1 Ed. Safety of machinery - Electrical equipment of machines - Part 1: General
4.1 b:2000 requirements
IEC 60204-32 Ed. Safety of machinery - Electrical equipment of machines - Part 32:
1.0 b:1998 Requirements for hoisting machines
Page 9
IEC 60214-1 Ed.
Tap-changers - Part 1: Performance requirements and test methods
1.0 b:2003
IEC 60227-1
Amd.1 Ed. 2.0 Amendment No. 1
b:1995
IEC 60227-1
Amd.2 Ed. 2.0 Amendment 2
b:1998
IEC 60227-1 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
2.2 b:1998 450/750 V - Part 1: General requirements
IEC 60227-2
Amd.1 Ed. 2.0 Amendment 1
b:2003
IEC 60227-2 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
2.1 b:2003 450/750 V - Part 2: Test methods
IEC 60227-3
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60227-3 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
2.1 b:1997 450/750 V - Part 3: Non-sheathed cables for fixed wiring
IEC 60227-4
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60227-4 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
2.1 b:1997 450/750 V - Part 4: Sheathed cables for fixed wiring
IEC 60227-5
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60227-5
Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to
Amd.2 Ed. 2.0
and including 450/750 V - Part 5: Flexible cables (cords)
b:2003
IEC 60227-5 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
2.2 b:2003 450/750 V - Part 5: Flexible cables (cords)
IEC 60227-6 Ed. Polyvinyl chloride insulated cables of rated voltages up to and including
3.0 b:2001 450/750 V - Part 6: Lift cables and cables for flexible connections
IEC 60227-7
Amd.1 Ed. 1.0 Amendment 1
b:2003
IEC 60229 Ed. 2.0 Tests on cable oversheaths which have a special protective function and
b:1982 are applied by extrusion
Page 10
IEC 60238 Ed. 8.0
Edison screw lampholders
b:2004
IEC 60245-1 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
4.0 b:2003 Part 1: General requirements
IEC 60245-2
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60245-2
Amd.2 Ed. 2.0 Amendment No. 2
b:1997
IEC 60245-2 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
2.2 b:1998 Part 2: Test methods
IEC 60245-3
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60245-3 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
2.0 b:1994 Part 3: Heat resistant silicone insulated cables
IEC 60245-4
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60245-4
Amendment 2 - Rubber insulated cables - Rated voltages up to and
Amd.2 Ed. 2.0
including 450/750 V - Part 4: Cords and flexible cables
b:2003
IEC 60245-4 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
2.2 b:2004 Part 4: Cords and flexible cables
IEC 60245-5
Amendment 1 - Rubber insulated cables - Rated voltages up to and
Amd.1 Ed. 2.0
including 450/750 V - Part 5: Lift cables
b:2003
IEC 60245-5 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
2.0 b:1994 Part 5: Lift cables
IEC 60245-6
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60245-6
Amendment 2 - Rubber insulated cables - Rated voltages up to and
Amd.2 Ed. 2.0
including 450/750 V - Part 6: Arc welding electrode cables
b:2003
IEC 60245-6 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
2.0 b:1994 Part 6: Arc welding electrode cables
IEC 60245-7
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60245-7 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
1.0 b:1994 Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-8 Ed. Rubber insulated cables - Rated voltages up to and including 450/750 V -
1.1 b:2004 Part 8: Cords for applications requiring high flexibility
IEC 60246 Ed. 1.0 Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a
b:1967 maximum working temperature of 105 ÝC for use in television receivers
Page 11
IEC 60254-1 Ed. Lead-acid traction batteries - Part 1: General requirements and methods of
3.0 b:1997 test
IEC 60254-2 Ed. Lead-acid traction batteries - Part 2: Dimensions of cells and terminals
3.1 b:2000 and marking of polarity on cells
IEC 60255-11 Ed. Electrical relays - Part 11: Interruptions to and alternating component
1.0 b:1979 (ripple) in d.c. auxiliary energizing quantity of measuring relays
IEC 60255-12 Ed. Electrical relays - Part 12: Directional relays and power relays with two
1.0 b:1980 input energizing quantities
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
IEC 60255- 21-1
measuring relays and protection equipment - Section One: Vibration tests
Ed. 1.0 b:1988
(sinusoidal)
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
IEC 60255- 21-2
measuring relays and protection equipment - Section Two: Shock and
Ed. 1.0 b:1988
bump tests
IEC 60255- 21-3 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on
Ed. 1.0 b:1993 measuring relays and protection equipment - Section 3: Seismic tests
IEC 60255- 22-1 Electrical relays - Part 22: Electrical disturbance tests for measuring
Ed. 1.0 b:1988 relays and protection equipment - Part 1: 1 MHz burst disturbance tests
IEC 60255- 22-2 Electrical relays - Part 22: Electrical disturbance tests for measuring
Ed. 2.0 b:1996 relays and protection equipment - Section 2: Electrostatic discharge tests
IEC 60255- 22-5 Electrical relays - Part 22-5: Electrical disturbance tests for measuring
Ed. 1.0 b:2002 relays and protection equipment - Surge immunity test
IEC 60255- 22-7 Electrical relays - Part 22-7: Electrical disturbance tests for measuring
Ed. 1.0 b:2003 relays and protection equipment - Power frequency immunity tests
IEC 60255-24 Ed. Electrical relays - Part 24: Common format for transient data exchange
1.0 b:2001 (COMTRADE) for power systems
IEC 60255-25 Ed. Electrical relays - Part 25: Electromagnetic emission tests for measuring
1.0 b:2000 relays and protection equipment
IEC 60255-26 Ed. Electrical relays - Part 26: Electromagnetic compatibility requirements for
1.0 b:2004 measuring relays and protection equipment
IEC 60255-3 Ed. Electrical relays - Part 3: Single input energizing quantity measuring
2.0 b:1989 relays with dependent or independent time
Page 12
IEC 60255-5 Ed. Electrical Relays - Part 5: Insulation coordination for measuring relays and
2.0 b:2000 protection equipment - Requirements and tests
IEC 60264- 2-2 Amendment 1 - Packaging of winding wires - Part 2-2: Cylindrical barrelled
Amd.1 Ed. 1.0 delivery spools - Specification for returnable spools made from
b:2003 thermoplastic material
IEC 60264- 2-3 Amendment 1 - Packaging of winding wires - Part 2-3: Cylindrical barrelled
Amd.1 Ed. 1.0 delivery spools - Specification for non-returnable spools made from
b:2003 thermoplastic material
IEC 60264- 3-3 Amendment 1 - Packaging of winding wires - Part 3-3: Taper barrelled
Amd.1 Ed. 1.0 delivery spools - Specification for non-returnable spools made from
b:2003 thermoplastic material
IEC 60264- 3-5 Ed. Packaging of winding wires - Part 3-5: Taper barrelled delivery spools -
2.0 b:1999 Specification for spool containers made from thermoplastic material
IEC 60264- 4-2 Amendment 1 - Packaging of winding wires - Part 4-2: Methods of test -
Amd.1 Ed. 1.0 Containers made from thermoplastic material for taper barrelled delivery
b:2003 spools
IEC 60264- 5-1 Ed. Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools
1.0 b:1997 with conical flanges - Basic dimensions
IEC 60265-1 Ed. High-voltage switches - Part 1: Switches for rated voltages above 1 kV and
3.0 b:1998 less than 52 kV
IEC 60265-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1994
IEC 60265-2
Amd.2 Ed. 1.0 Amendment 2
b:1998
IEC 60265-2 Ed. High-voltage switches. Part 2: High-voltage switches for rated voltages of
1.0 b:1988 52 kV and above
IEC 60269-1
Amd.1 Ed. 3.0 Amendment 1 - Low-voltage fuses - Part 1: General requirements
b:2005
Page 13
IEC 60269-2
Amd.1 Ed. 2.0 Amendment No. 1
b:1995
IEC 60269-2
Amd.2 Ed. 2.0 Amendment 2
b:2001
IEC 60269-2 Ed. Low-voltage fuses. Part 2: Supplementary requirements for fuses for use
2.0 b:1986 by authorized persons (fuses mainly for industrial applicati on)
IEC 60269-3 Ed. Low-voltage fuses. Part 3: Supplementary requirements for fuses for use
2.0 b:1987 by unskilled persons (fuses mainly for household and similar applications)
IEC 60269-4
Amd.1 Ed. 3.0 Amendment No. 1
b:1995
IEC 60269-4
Amd.2 Ed. 3.0 Amendment 2
b:2002
IEC 60269-4 Ed. Low-voltage fuses. Part 4: Supplementary requirements for fuse-links for
3.0 b:1986 the protection of semiconductor devices
IEC 60273 Ed. 3.0 Characteristic of indoor and outdoor post insulators for systems with
b:1990 nominal voltages greater than 1000 V
IEC 60276 Ed. 1.0 Definitions and nomenclature for carbon brushes, brush-holders,
b:1968 commutators and slip-rings
IEC 60282-2
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60287- 1-1 Ed. Electric cables - Calculation of the current rating - Part 1-1: Current rating
1.2 b:2001 equations (100 % load factor) and calculation of losses - General
Page 14
Electric cables - Calculation of the current rating - Part 1: Current rating
IEC 60287- 1-2 Ed.
equations (100 % load factor) and calculations of losses - Section 2:
1.0 b:1993
Sheath eddy current loss factors for two circuits in flat formation
Electric cables - Calculation of the current rating - Part 1-3: Current rating
IEC 60287- 1-3 Ed. equations (100 % load factor) and calculation of losses - Current sharing
1.0 b:2002 between parallel single-core cables and calculation of circulating current
losses
IEC 60287- 2-1 Ed. Electric cables - Calculation of the current rating - Part 2-1: Thermal
1.1 b:2001 resistance - Calculation of thermal resistance
IEC 60296 Ed. 3.0 Fluids for electrotechnical applications - Unused mineral insulating oils for
b:2003 transformers and switchgear
IEC 60300- 3-3 Ed. Dependability management - Part 3-3: Application guide - Life cycle
2.0 en:2004 costing
IEC 60309-1 Ed. Plugs, socket-outlets and couplers for industrial purposes - Part 1:
4.0 b:1999 General requirements
IEC 60317- 0-1 Ed. Specifications for particular types of winding wires - Part 0-1: General
2.1 b:2000 requirements - Enamelled round copper wire
IEC 60317- 0-2 Amendment 2 - Specifications for particular types of winding wires - Part
Amd.2 Ed. 2.0 0-2: General requirements - Enamelled rectangular copper wire
b:2005
Page 15
IEC 60317- 0-2 Ed. Specifications for particular types of winding wires - Part 0-2: General
2.1 b:2000 requirements - Enamelled rectangular copper wire
IEC 60317- 0-3 Ed. Specifications for particular types of winding wires - Part 0-3: General
2.2 b:2004 requirements - Enamelled round aluminium wire
IEC 60317-1
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60317-1
Amd.2 Ed. 3.0 Amendment No. 2
b:1997
IEC 60317-1 Ed. Specifications for particular types of winding wires - Part 1: Polyvinyl
3.2 b:1997 acetal enamelled round copper wire, class 105
IEC 60317-12
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-12 Ed. Specifications for particular types of winding wires. Part 12: Polyvinyl
2.0 b:1990 acetal enamelled round copper wire, class 120
IEC 60317-13
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-13
Amd.2 Ed. 2.0 Amendment No. 2
b:1997
IEC 60317-15 Ed. "Specifications for particular types of winding wires - Part 15:
3.0 b:2004 Polyesterimide enamelled round aluminium wire, class 180"
Page 16
IEC 60317-16
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-16 Ed. Specifications for particular types of winding wires. Part 16: Polyester
2.0 b:1990 enamelled rectangular copper wire, class 155
IEC 60317-17
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-17 Ed. Specifications for particular types of winding wires - Part 17: Polyvinyl
2.0 b:1990 acetal enamelled rectangular copper wire, class 105
IEC 60317-18 Ed. "Specifications for particular types of winding wires - Part 18: Polyvinyl
3.0 b:2004 acetal enamelled rectangular copper wire, class 120"
IEC 60317-19
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-19
Amd.2 Ed. 2.0 Amendment 2
b:1999
IEC 60317-2
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60317-2
Amd.2 Ed. 3.0 Amendment 2
b:1999
IEC 60317-20
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-20
Amd.2 Ed. 2.0 Amendment 2
b:1999
IEC 60317-20 Ed. Specifications for particular types of winding wires - Part 20: Solderable
2.2 b:2000 polyurethane enamelled round copper wire, class 155
IEC 60317-21
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-21
Amd.2 Ed. 2.0 Amendment 2
b:1999
IEC 60317-23
Amd.1 Ed. 2.0 Amendment No.1
b:1997
IEC 60317-23
Amd.2 Ed. 2.0 Amendment 2
b:1999
Page 17
IEC 60317-23 Ed. Specifications for particular types of winding wires - Part 23: Solderable
2.2 b:2000 polyesterimide enamelled round copper wire, class 180
IEC 60317-25
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-25
Amd.2 Ed. 2.0 Amendment No. 2
b:1997
IEC 60317-26
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60317-26 Ed. Specifications for particular types of winding wires. Part 26: Polyamide-
2.0 b:1990 imide enamelled round copper wire, class 200
IEC 60317-27
Amd.1 Ed. 3.0 Amendment 1
b:1999
IEC 60317-27 Ed. Specifications for particular types of winding wires - Part 27: Paper tape
3.0 b:1998 covered rectangular copper wire
IEC 60317-28
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-28 Ed. Specifications for particular types of winding wires. Part 28:
1.0 b:1990 Polyesterimide enamelled rectangular copper wire, class 180
IEC 60317-29
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-3 Ed. "Specifications for particular types of winding wires - Part 3: Polyester
3.0 b:2004 enamelled round copper wire, class 155"
IEC 60317-30
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-30 Ed. Specifications for particular types of winding wires. Part 30: Polyimide
1.0 b:1990 enamelled rectangular copper wire, class 220
IEC 60317-31
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-32
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-33
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
Page 18
Specifications for particular types of winding wires - Part 33: Glass-fibre
IEC 60317-33 Ed.
wound resin or varnish impregnated, bare or enamelled rectangular copper
1.1 b:1997
wire, temperature index 200
IEC 60317-34 Ed. Specifications for particular types of winding wires - Part 34: Polyester
2.0 b:1997 enamelled round copper wire, class 130L
IEC 60317-35
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-35
Amd.2 Ed. 1.0 Amendment 2
b:1999
IEC 60317-35 Ed. Specifications for particular types of winding wires - Part 35: Solderable
1.2 b:2000 polyurethane enamelled round copper wire, class 155, with a bonding layer
IEC 60317-36
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-36
Amd.2 Ed. 1.0 Amendment 2
b:1999
IEC 60317-37
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-37
Amd.2 Ed. 1.0 Amendment 2
b:1999
IEC 60317-38
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-38
Amd.2 Ed. 1.0 Amendment 2
b:1999
IEC 60317-39
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
IEC 60317-4
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60317-4
Amd.2 Ed. 3.0 Amendment 2
b:1999
IEC 60317-4 Ed. Specifications for particular types of winding wires - Part 4: Solderable
3.2 b:2000 polyurethane enamelled round copper wire, class 130
IEC 60317-40
Amd.1 Ed. 1.0 Amendment No. 1
b:1997
Page 19
Specifications for particular types of winding wires - Part 40: Glass-fibre
IEC 60317-40 Ed.
braided resin or varnish impregnated, bare or enamelled rectangular
1.0 b:1992
copper wire, temperature index 200
IEC 60317-42 Ed. Specifications for particular types of winding wires - Part 42: Polyester-
1.0 b:1997 amide-imide enamelled round copper wire, class 200
IEC 60317-43 Ed. Specifications for particular types of winding wires - Part 43: Aromatic
1.0 b:1997 polyimide tape wrapped round copper wire, class 240
IEC 60317-44 Ed. Specifications for particular types of winding wires - Part 44: Aromatic
1.0 b:1997 polyimide tape wrapped rectangular copper wire, class 240
IEC 60317-46 Ed. Specifications for particular types of winding wires - Part 46: Aromatic
1.0 b:1997 polyimide enamelled round copper wires, class 240
IEC 60317-47 Ed. Specifications for particular types of winding wires - Part 47: Aromatic
1.0 b:1997 polyimide enamelled rectangular copper wire, class 240
IEC 60317-51 Ed. Specifications for particular types of winding wires - Part 51: Solderable
1.0 b:2001 polyurethane enamelled round copper wire, class 180
IEC 60317-54 Ed. Specifications for particular types of winding wires - Part 54: Polyester
1.0 b:2001 enamelled round copper wire, class 155L
IEC 60317-7
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60317-7
Amd.2 Ed. 3.0 Amendment No. 2
b:1997
IEC 60317-7 Ed. Specifications for particular types of winding wires - Part 7: Polyimide
3.2 b:1997 enamelled round copper wire, class 220
IEC 60317-8
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60317-8
Amd.2 Ed. 3.0 Amendment No. 2
b:1997
IEC 60317-8 Ed. Specifications for particular types of winding wires - Part 8: Polyesterimide
3.2 b:1997 enamelled round copper wire, class 180
IEC 60320-1 Ed. Appliance couplers for household and similar general purposes - Part 1:
2.0 b:2001 General requirements
Page 20
IEC 60320- 2-1 Ed. Appliance couplers for household and similar general purposes - Part 2-1:
2.0 b:2000 Sewing machine couplers
IEC 60320- 2-2 Ed. Appliance couplers for household and similar general purposes - Part 2-2:
2.0 b:1998 Interconnection couplers for household and similar equipment
IEC 60320- 2-3 Amendment 1 - Appliance coupler for household and similar general
Amd.1 Ed. 1.0 purposes - Part 2-3: Appliance coupler with a degree of protection higher
b:2004 than IPX0
Appliance couplers for household and similar general purposes - Part 2-3:
IEC 60320- 2-3 Ed.
Appliance couplers with a degree of protection higher than IPX0
1.1 b:2005
IEC 60322 Ed. 2.0 Railway applications - Electric equipment for rolling stock - Rules for
b:2001 power resistors of open construction
IEC 60329 Ed. 2.0 Strip-wound cut cores of grain oriented silicon-iron alloy, used for
b:1984 electronic and telecommunication equipment
IEC 60335- 2-29 Household and similar electrical appliances - Safety - Part 2-29: Particular
Ed. 4.1 b:2004 requirements for battery chargers
IEC 60344 Ed. 2.0 Guide to the calculation of resistance of plain and coated copper
b:1980 conductors of low-frequency cables and wires
IEC 60349-1
Amd.1 Ed. 1.0 Amendment 1
b:2002
Electric traction - Rotating electrical machines for rail and road vehicles -
IEC 60349-1 Ed.
Part 1: Machines other than electronic convertor-fed alternating current
1.1 b:2002
motors
IEC 60349-2 Ed. Electric traction - Rotating electrical machines for rail and road vehicles -
2.0 b:2002 Part 2: Electronic convertor-fed alternating current motors
IEC 60352-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1996
IEC 60352-2 Ed. Solderless connections. Part 2: Solderless crimped connections - General
1.0 b:1990 requirements, test methods and practical guidance
IEC 60352-4
Amd.1 Ed. 1.0 Amendment 1
b:2000
IEC 60352-6 Ed. Solderless connections - Part 6: Insulation piercing connections - General
1.0 b:1997 requirements, test methods and practical guidance
Page 21
IEC 60353 Ed. 2.0
Line traps for a.c. power systems
b:1989
IEC 60364- 5-53 Electrical installations of buildings - Part 5-53: Selection and erection of
Ed. 3.1 b:2002 electrical equipment - Isolation, switching and control
IEC 60364-7-704
Amd.1 Ed. 1.0 Amendment 1
b:1999
IEC 60364-7-710 Electrical installations of buildings - Part 7-710: Requirements for special
Ed. 1.0 b:2002 installations or locations - Medical locations
IEC 60364-7-711 Electrical installations of buildings - Part 7-711: Requirements for special
Ed. 1.0 b:1998 installations or locations - Exhibitions, shows and stands
IEC 60364-7-715 Electrical installations of buildings - Part 7-715: Requirements for special
Ed. 1.0 b:1999 installations or locations - Extra-low-voltage lighting installations
IEC 60364-7-717 Electrical installations of buildings - Part 7-717: Requirements for special
Ed. 1.0 b:2001 installations or locations - Mobile or transportable units
IEC 60367-1
Amd.1 Ed. 2.0 Amendment No. 1
b:1984
IEC 60367-1
Amd.2 Ed. 2.0 Amendment No. 2
b:1992
IEC 60367-1 Ed. Cores for inductors and transformers for telecommunications. Part 1:
2.0 b:1982 Measuring methods
IEC 60367-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1983
IEC 60367-2 Ed. Cores for inductors and transformers for telecommunications. Part 2:
1.0 b:1974 Guides for the drafting of performance specifications
IEC 60367- 2A Ed. Cores for inductors and transformers for telecommunications - Part 2:
1.0 b:1976 Guides for the drafting of performance specifications - First supplement
Page 22
IEC 60371-1 Ed. Specification for insulating materials based on mica - Part 1: Definitions
3.0 b:2003 and general requirements
IEC 60371- 3-1 Ed. Specification for insulating materials based on mica. Part 3: Specifications
2.0 b:1984 for individual materials. Sheet 1: Commutator separators and materials
IEC 60371- 3-2 Ed. Specification for insulating materials based on mica - Part 3:
1.0 b:1991 Specifications for individual materials - Sheet 2: Mica paper
IEC 60371- 3-8 Ed. Insulating materials based on mica - Part 3: Specifications for individual
1.0 b:1995 materials - Sheet 8: Mica paper tapes for flame-resistant security cables
IEC 60371- 3-9 Ed. Insulating materials based on mica - Part 3: Specifications for individual
1.0 b:1995 materials - Sheet 9: Moulding micanite
IEC 60372 Ed. 3.0 Locking devices for ball and socket couplings of string insulator units -
b:1984 Dimensions and tests
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1:
IEC 60383-1 Ed.
Ceramic or glass insulator units for a.c. systems - Definitions, test
4.0 b:1993
methods and acceptance criteria
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2:
IEC 60383-2 Ed.
Insulator strings and insulator sets for a.c. systems - Definitions, test
1.0 b:1993
methods and acceptance criteria
IEC 60394-1 Ed. Varnished fabrics for electrical purposes. Part 1: Definitions and general
1.0 b:1972 requirements
Page 23
IEC 60394- 3-1 Ed. Varnished fabrics for electrical purposes. Part 3: Specifications for
1.0 b:1976 individual materials. Sheet 1: Oleoresinous varnish-cotton base, OR/C
IEC 60400 Amd.2 Amendment 2 - Lampholders for tubular fluorescent lamps and
Ed. 6.0 b:2004 starterholders
IEC 60401-1 Ed. Terms and nomenclature for cores made of magnetically soft ferrites - Part
1.0 b:2002 1: Terms used for physical irregularities
IEC 60401-2 Ed. Terms and nomenclature for cores made of magnetically soft ferrites - Part
1.0 b:2003 2: Reference of dimensions
Terms and nomenclature for cores made of magnetically soft ferrites - Part
IEC 60401-3 Ed.
3: Guidelines on the format of data appearing in manufacturers' catalogues
1.0 b:2003
of transformer and inductor cores
IEC 60404- 1-1 Ed. "Magnetic materials - Part 1-1: Classification - Surface insulations of
1.0 b:2004 electrical steel sheet, strip and laminations "
IEC 60404-10 Ed. Magnetic materials. Part 10: Methods of measurement of magnetic
1.0 b:1988 properties of magnetic sheet and strip at medium frequencies
IEC 60404-11 Ed. Magnetic materials - Part 11: Method of test for the determination of
1.1 b:1999 surface insulation resistance of magnetic sheet and strip
IEC 60404-12 Ed. Magnetic materials - Part 12: Guide to methods of assessment of
1.0 b:1992 temperature capability of interlaminar insulation coatings
IEC 60404-13 Ed. Magnetic materials - Part 13: Methods of measurement of density,
1.0 b:1995 resistivity and stacking factor of electrical steel sheet and strip
IEC 60404-2 Ed. Magnetic materials - Part 2: Methods of measurement of the magnetic
3.0 b:1996 properties of electrical steel sheet and strip by means of an Epstein frame
IEC 60404-3 Ed. Magnetic materials - Part 3: Methods of measurement of the magnetic
2.1 b:2002 properties of magnetic sheet and strip by means of a single sheet tester
IEC 60404-4 Ed. Magnetic materials - Part 4: Methods of measurement of d.c. magnetic
2.1 b:2000 properties of magnetically soft materials
IEC 60404-5 Ed. Magnetic materials - Part 5: Permanent magnet (magnetically hard)
2.0 b:1993 materials - Methods of measurement of magnetic properties
Page 24
IEC 60404-7 Ed. Magnetic materials. Part 7: Method of measurement of the coercivity of
1.0 b:1982 magnetic materials in an open magnetic circuit
IEC 60404- 8-6 Ed. Magnetic materials - Part 8-6: Specifications for individual materials - Soft
2.0 b:1999 magnetic metallic materials
IEC 60404- 8-9 Ed. Magnetic materials - Part 8: Specifications for individual materials -
1.0 b:1994 Section 9: Standard specification for sintered soft magnetic materials
IEC 60404-9 Ed. Magnetic materials. Part 9: Methods of determination of the geometrical
1.0 b:1987 characteristics of magnetic steel sheet and strip
IEC 60413 Ed. 1.0 Test procedures for determining physical properties of brush materials for
b:1972 electrical machines
IEC 60422 Ed. 2.0 Supervision and maintenance guide for insulating mineral insulating oils in
b:1989 electrical equipment
IEC 60423 Ed. 2.0 Conduits for electrical purposes - Outside diameters of conduits for
b:1993 electrical installations and threads for conduits and fittings
IEC 60424-1 Ed. Ferrite cores - Guide on the limits of surface irregularities - Part 1:
1.0 b:1999 General specification
IEC 60424-2 Ed. Guidance of the limits of surface irregularities of ferrite cores - Part 2:
1.0 b:1997 RM-cores
IEC 60424-3 Ed. Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-
1.0 b:1999 cores and E-cores
IEC 60424-4 Ed. Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-
1.0 b:2001 cores
IEC 60431 Ed. 2.0 Dimensions of square cores (RM-cores) made of magnetic oxides and
b:1983 associated parts
IEC 60432-1 Ed. Incandescent lamps - Safety specifications - Part 1: Tungsten filament
2.0 b:1999 lamps for domestic and similar general lighting purposes
Page 25
IEC 60432-2 Ed. Incandescent lamps - Safety specifications - Part 2: Tungsten halogen
2.0 b:1999 lamps for domestic and similar general lighting purposes
IEC 60432-3 Ed. Incandescent lamps - Safety specifications - Part 3: Tungsten halogen
1.0 b:2002 lamps (non-vehicle)
IEC 60439-1
Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part
Amd.1 Ed. 4.0
1: Type-tested and partially type-tested assemblies
b:2004
IEC 60439-1 Ed. Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested
4.1 b:2004 and partially type-tested assemblies
IEC 60439-2 Ed. Low-voltage switchgear and controlgear assemblies - Part 2: Particular
3.0 b:2000 requirements for busbar trunking systems (busways)
IEC 60439-3
Amd.1 Ed. 1.0 Amendment No. 1
b:1993
IEC 60439-3
Amd.2 Ed. 1.0 Amendment 2
b:2001
IEC 60439-4 Ed. Low-voltage switchgear and controlgear assemblies - Part 4: Particular
2.0 b:2004 requirements for assemblies for construction sites (ACS)
IEC 60439-5
Amd.1 Ed. 1.0 Amendment 1
b:1998
IEC 60446 Ed. 3.0 Basic and safety principles for man-machine interface, marking and
b:1999 identification - Identification of conductors by colours or numerals
IEC 60447 Ed. 3.0 "Basic and safety principles for man-machine interface, marking and
b:2004 identification - Actuating principles"
IEC 60454-1 Ed. Specifications for pressure-sensitive adhesive tapes for electrical
2.0 b:1992 purposes - Part 1: General requirements
Page 26
IEC 60454- 3-1
Amd.1 Ed. 2.0 Amendment 1
b:2001
Page 27
Pressure-sensitive adhesive tapes for electrical purposes - Part 3:
IEC 60454- 3-9 Ed.
Specifications for individual materials - Sheet 9: Cellulose acetate woven
1.0 b:1998
fabric tapes with rubber thermosetting adhesive
IEC 60455-1 Ed. Resin based reactive compounds used for electrical insulation - Part 1:
2.0 b:1998 Definitions and general requirements
IEC 60464-1 Ed. Varnishes used for electrical insulation - Part 1: Definitions and general
2.0 b:1998 requirements
IEC 60464- 3-1 Ed. Varnishes used for electrical insulation - Part 3: Specifications for
2.0 b:2001 individual materials - Sheet 1: Ambient curing finishing varnishes
IEC 60464- 3-2 Ed. Varnishes used for electrical insulation - Part 3: Specifications for
2.0 b:2001 individual materials - Sheet 2: Hot curing impregnating varnishes
IEC 60466 Ed. 2.0 A.C. insulation-enclosed switchgear and controlgear for rated voltages
b:1987 above 1 kV and up to and including 38 kV
IEC 60470 Ed. 2.0 High-voltage alternating current contactors and contactor-based motor-
b:2000 starters
IEC 60478-4 Ed. Stabilized power supplies, d.c. output. Part 4: Tests other than radio-
1.0 b:1976 frequency interference
Page 28
IEC 60478-5 Ed. Stabilized power supplies, d.c. output - Part 5: Measurement of the
1.0 b:1993 magnetic component of the reactive near field
IEC 60480 Ed. 2.0 Guidelines for the checking and treatment of sulfur hexafluoride (SF6)
b:2004 taken from electrical equipment and specification for its re-use
IEC 60493-1 Ed. Guide for the statistical analysis of ageing test data. Part 1: Methods
1.0 b:1974 based on mean values of normally distributed test results
"Power cables with extruded insulation and their accessories for rated
IEC 60502-1 Ed.
voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1:
2.0 b:2004
Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)"
IEC 60502-2
Amd.1 Ed. 1.0 Amendment 1
b:1998
Power cables with extruded insulation and their accessories for rated
IEC 60502-2 Ed. voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2:
1.1 b:1998 Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36
kV)
"Power cables with extruded insulation and their accessories for rated
voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test
IEC 60502-4 Ed.
requirements on accessories for cables with rated voltages from 6 kV (Um
2.0 b:2005
= 7,2 kV) up to 30 kV (Um = 36 kV)"
IEC 60507 Ed. 2.0 Artificial pollution tests on high-voltage insulators to be used on a.c.
b:1991 systems
IEC 60554-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1983
IEC 60554-1 Ed. Specification for cellulosic papers for electrical purposes. Part 1:
1.0 b:1977 Definitions and general requirements
IEC 60554- 3-2 Ed. Specification for cellulosic papers for electrical purposes. Part 3:
1.0 b:1983 Specifications for individual materials. Sheet 2: Capacitor paper
IEC 60554- 3-3 Ed. Specification for cellulosic papers for electrical purposes. Part 3:
1.0 b:1980 Specifications for individual materials. Sheet 3: CrOpe paper
IEC 60554- 3-5 Ed. Specification for cellulosic papers for electrical purposes. Part 3:
1.0 b:1984 Specifications for individual materials. Sheet 5: Special papers
Page 29
IEC 60556 Amd.2 Amendment 2 - Measuring methods for properties of gyromagnetic
Ed. 1.0 b:2004 materials intended for application at microwave frequencies
IEC 60556 Ed. 1.0 Measuring methods for properties of gyromagnetic materials intended for
b:1982 application at microwave frequencies
IEC 60588-3 Ed. Askarels for transformers and capacitors. Part 3: Specifications for new
1.0 b:1977 askarels
IEC 60588-4 Ed. Askarels for transformers and capacitors. Part 4: Guide for maintenance of
1.0 b:1979 transformer askarels in equipment
IEC 60588-5 Ed. Askarels for transformers and capacitors. Part 5: Screening test for
1.0 b:1979 compatibility of materials and transformer askarels
IEC 60588-6 Ed. Askarels for transformers and capacitors. Part 6: Screening test for effects
1.0 b:1979 of materials on capacitor askarels
IEC 60590 Ed. 1.0 Determination of the aromatic hydrocarbon content of new mineral
b:1977 insulating oils
IEC 60598- 2-1 Ed. Luminaires. Part 2: Particular requirements. Section One: Fixed general
1.0 b:1979 purpose luminaires
IEC 60598- 2-10 Luminaires - Part 2-10: Particular requirements - Portable luminaires for
Ed. 2.0 b:2003 children
IEC 60598- 2-18 Luminaires - Part 2: Particular requirements - Section 18: Luminaires for
Ed. 2.0 b:1993 swimming pools and similar applications
Page 30
IEC 60598- 2-19 Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling
Ed. 1.0 b:1981 luminaires (safety requirements)
IEC 60598- 2-2 Ed. Luminaires - Part 2: Particular requirements - Section 2: Recessed
2.1 b:1997 luminaires
IEC 60598- 2-22 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency
Ed. 3.1 b:2002 lighting
IEC 60598- 2-23 Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting
Ed. 1.1 b:2001 systems for filament lamps
IEC 60598- 2-24 Luminaires - Part 2-24: Particular requirements - Luminaires with limited
Ed. 1.0 b:1997 surface temperatures
IEC 60598- 2-25 Luminaires - Part 2: Particular requirements - Section 25: Luminaires for
Ed. 1.0 b:1994 use in clinical areas of hospitals and health care buildings
IEC 60598- 2-3 Ed. Luminaires - Part 2-3: Particular requirements - Luminaires for road and
3.0 b:2002 street lighting
IEC 60598- 2-4 Ed. Luminaires - Part 2: Particular requirements - Section 4: Portable general
2.0 b:1997 purpose luminaires
IEC 60598- 2-6 Ed. Luminaires - Part 2: Particular requirements - Section 6: Luminaires with
2.0 b:1994 built-in transformers for filament lamps
Page 31
IEC 60598-2-6ISH Interpretation sheet to IEC 60598-2-6
I1 Ed. 2.0 b:2001
IEC 60598- 2-7 Ed. Luminaires. Part 2: Particular requirements. Section Seven: Portable
1.0 b:1982 luminaires for garden use
IEC 60598- 2-9 Ed. Luminaires. Part 2: Particular requirements. Section Nine: Photo and film
2.0 b:1987 luminaires (non-professional)
IEC 60614-1
Amd.1 Ed. 2.0 Amendment No. 1
b:1995
IEC 60614-1 Ed. Conduits for electrical installations - Specification - Part 1: General
2.0 b:1994 requirements
IEC 60614- 2-1 Ed. Specification for conduits for electrical installations. Part 2: Particular
1.0 b:1982 specifications for conduits. Section One: Metal conduits
IEC 60614- 2-2 Ed. Specification for conduits for electrical installations - Part 2: Particular
1.0 b:1980 specification for rigid plain conduits of insulating materials
IEC 60614- 2-5 Ed. Specifications for conduits for electrical installations - Part 2: Particular
1.0 b:1992 specifications for conduits - Section 5: Flexible conduits
Page 32
IEC 60618 Amd.1
Amendment No. 1
Ed. 1.0 b:1981
IEC 60621-1 Ed. Electrical installations for outdoor sites under heavy conditions (including
2.0 b:1987 open-cast mines and quarries). Part 1: Scope and definitions
IEC 60621-2 Ed. Electrical installations for outdoor sites under heavy conditions (including
2.0 b:1987 open-cast mines and quarries). Part 2: General protection requirements
IEC 60621-3
Amd.1 Ed. 1.0 Amendment No. 1
b:1986
IEC 60621-4
Amd.1 Ed. 1.0 Amendment No. 1
b:1987
IEC 60621-4 Ed. Electrical installations for outdoor sites under heavy conditions (including
1.0 b:1981 open-cast mines and quarries). Part 4: Requirements for the installation
IEC 60621-5 Ed. Electrical installations for outdoor sites under heavy conditions (including
1.0 b:1987 open-cast mines and quarries). Part 5: Operating requirements
IEC 60622 Ed. 3.0 Secondary cells and batteries containing alkaline or other non-acid
b:2002 electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
IEC 60623 Ed. 4.0 Secondary cells and batteries containing alkaline or other non-acid
b:2001 electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
IEC 60626-1
Amd.1 Ed. 2.0 Amendment No. 1 to IEC 626-1
b:1996
IEC 60626-1 Ed. Combined flexible materials for electrical insulation - Part 1: Definitions
2.0 b:1995 and general requirements
IEC 60626-3
Amd.1 Ed. 2.0 Amendment 1
b:1999
IEC 60626-3 Ed. Combined flexible materials for electrical insulation - Part 3: Specifications
2.1 b:2002 for individual materials
Page 33
IEC 60630 Ed. 2.4
Maximum lamp outlines for incandescent lamps
b:2002
IEC 60631 Ed. 1.0 Characteristics and tests for electrodynamic and electromagnetic braking
b:1978 systems
IEC 60634 Ed. 2.0 Heat test source (H.T.S.) lamps for carrying out heating tests on
b:1993 luminaires
IEC 60641-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1993
IEC 60641-1 Ed. Specification for pressboard and presspaper for electrical purposes. Part
1.0 b:1979 1: Definitions and general requirements
IEC 60647 Ed. 1.0 Dimensions for magnetic oxide cores intended for use in power supplies
b:1979 (EC-cores)
IEC 60660 Ed. 2.0 Insulators - Tests on indoor post insulators of organic material for systems
b:1999 with nominal voltages greater than 1 000 V up to but not including 300 kV
IEC 60664-1
Amd.1 Ed. 1.0 Amendment 1
b:2000
Page 34
IEC 60664-1
Amd.2 Ed. 1.0 Amendment 2
b:2002
IEC 60664-1 Ed. Insulation coordination for equipment within low-voltage systems - Part 1:
1.2 b:2002 Principles, requirements and tests
IEC 60664-3 Ed. Insulation coordination for equipment within low-voltage systems - Part 3:
2.0 b:2003 Use of coating, potting or moulding for protection against pollution
IEC 60667-1 Ed. Specification for vulcanized fibre for electrical purposes. Part 1:
1.0 b:1980 Definitions and general requirements
IEC 60667-2
Amd.1 Ed. 1.0 Amendment No. 1
b:1986
IEC 60667-2 Ed. Specification for vulcanized fibre for electrical purposes. Part 2: Methods
1.0 b:1982 of test
IEC 60667- 3-1 Ed. Specification for vulcanized fibre for electrical purposes. Part 3:
1.0 b:1986 Specifications for individual materials. Sheet 1: Flat sheets
IEC 60669-1
Amd.1 Ed. 3.0 Amendment 1
b:1999
IEC 60669-1 Ed. Switches for household and similar fixed-electrical installations - Part 1:
3.1 b:2000 General requirements
IEC 60669- 2-1 Ed. Switches for household and similar fixed electrical installations - Part 2-1:
4.0 b:2002 Particular requirements - Electronic switches
IEC 60669- 2-2 Ed. Switches for household and similar fixed electrical installations - Part 2:
2.1 b:2002 Particular requirements - Section 2: Remote-control switches (RCS)
IEC 60669- 2-3 Ed. Switches for household and similar fixed electrical installations - Part 2-3:
2.0 b:1997 Particular requirements - Time-delay switches (TDS)
IEC 60669- 2-4 Ed. Switches for household and similar fixed electrical installations - Part 2-4:
1.0 b:2004 Particular requirements - Isolating switches
IEC 60670-1 Ed. Boxes and enclosures for electrical accessories for household and similar
1.0 b:2002 fixed electrical installations - Part 1: General requirements
Boxes and enclosures for electrical accessories for household and similar
IEC 60670-21 Ed.
fixed electrical installations - Part 21: Particular requirements for boxes
1.0 b:2004
and enclosures with provision for suspension means
Boxes and enclosures for electrical accessories for household and similar
IEC 60670-22 Ed.
fixed electrical installations - Part 22: Particular requirements for
1.0 b:2003
connecting boxes and enclosures
IEC 60672-1 Ed. Ceramic and glass insulating materials - Part 1: Definitions and
2.0 b:1995 classification
IEC 60672-3 Ed. Ceramic and glass-insulating materials - Part 3: Specifications for
2.0 b:1997 individual materials
Page 35
IEC 60674-1 Ed. Specification for plastic films for electrical purposes. Part 1: Definitions
1.0 b:1980 and general requirements
IEC 60681-1 Ed. Dimensions of small power motors for definite purpose application - Part 1:
1.0 b:1980 Oil burner motors
IEC 60684-2
Amendment 1 to 60684-2 Ed.2: Flexible insulating sleeving - Part 2:
Amd.1 Ed. 2.0
Methods of test
b:2003
IEC 60684-3-100 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 2.0 b:2001 sleeving - Sheets 100 to 105: Extruded PVC sleeving
IEC 60684-3-121 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 2.0 b:2001 sleeving - Sheets 121 to 124: Extruded silicone sleeving
IEC 60684-3-136 Flexible insulating sleeving - Part 3: Specification for individual types of
Ed. 1.0 b:1997 sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
IEC 60684-3-145 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 1.0 b:2001 sleeving - Sheets 145 to 147: Extruded PTFE sleeving
IEC 60684-3-151 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 1.0 b:1998 sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose
Page 36
Flexible insulating sleeving - Part 3: Specifications for individual types of
IEC 60684-3-214
sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame
Ed. 1.0 b:2001
retarded, shrink ratio 3:1 - Thick and medium wall
IEC 60684-3-240 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 2.0 b:2002 sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
IEC 60684-3-300 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 2.0 b:2002 sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated
IEC 60684-3-406 Flexible insulating sleeving - Part 3: Specifications for individual types of
Ed. 2.0 b:2003 sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating
Page 37
IEC 60686 Ed. 1.0
Stabilized power supplies, a.c. output
b:1980
IEC 60694 Ed. 2.2 Common specifications for high-voltage switchgear and controlgear
b:2002 standards
IEC 60695- 10-3 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief
Ed. 1.0 b:2002 distortion test
IEC 60695- 2-4/0 Fire hazard testing - Part 2: Test methods - Section 4/sheet 0: Diffusion
Ed. 1.0 b:1991 type and premixed type flame test methods
IEC 60695- 5-1 Ed. Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent -
2.0 b:2002 General guidance
IEC 60700-1
Amd.1 Ed. 1.0 Amendment 1
b:2003
IEC 60700-1 Ed. Thyristor valves for high voltage direct current (HVDC) power transmission
1.1 b:2003 - Part 1: Electrical testing
IEC 60702-1 Ed. Mineral insulated cables and their terminations with a rated voltage not
3.0 b:2002 exceeding 750 V - Part 1: Cables
IEC 60702-2 Ed. Mineral insulated cables and their terminations with a rated voltage not
2.0 b:2002 exceeding 750 V - Part 2: Terminations
IEC 60708-1
Amd.3 Ed. 1.0 Amendment No. 3
b:1988
IEC 60708-1 Ed. Low-frequency cables with polyolefin insulation and moisture barrier
1.0 b:1981 polyolefin sheath. Part 1: General design details and requirements
Calculation of the lower and upper limits for the average outer dimensions
IEC 60719 Ed. 2.0
of cables with circular copper conductors and of rated voltages up to and
b:1992
including 450/750 V
Page 38
IEC 60720 Ed. 1.0
Characteristics of line post insulators
b:1981
IEC 60724 Ed. 3.0 Short-circuit temperature limits of electric cables with rated voltages of 1
b:2000 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC 60730- 2-11 Automatic electrical controls for household and similar use - Part 2:
Ed. 1.2 b:1997 Particular requirements for energy regulators
IEC 60730- 2-14 Automatic electrical controls for household and similar use - Part 2-14:
Ed. 1.1 b:2001 Particular requirements for electric actuators
Automatic electrical controls for household and similar use - Part 2-3:
IEC 60730- 2-3 Ed.
Particular requirements for thermal protectors for ballasts for tubular
1.2 b:2001
fluorescent lamps
IEC 60732 Ed. 1.0 Measuring methods for cylinder cores, tube cores and screw cores of
b:1982 magnetic oxides
IEC 60740 Ed. 1.0 Laminations for transformers and inductors for use in telecommunication
b:1982 and electronic equipment
IEC 60754-1 Ed. Test on gases evolved during combustion of materials from cables - Part 1:
2.0 b:1994 Determination of the amount of halogen acid gas
IEC 60763-1 Ed. Specification for laminated pressboard. Part 1: Definitions, classification
1.0 b:1983 and general requirements
Page 39
Specification for laminated pressboard - Part 3: Specifications for
IEC 60763- 3-1 Ed.
individual materials - Sheet 1: Specifications for laminated precompressed
1.0 b:1992
board, Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2
IEC 60773 Ed. 1.0 Test methods and apparatus for measurement of the operational
b:1983 characteristics of brushes
IEC 60787 Ed. 1.0 Application guide for the selection of fuse-links of high-voltage fuses for
b:1983 transformer circuit application
IEC 60800 Ed. 2.0 Heating cables with a rated voltage of 300/500 V for comfort heating and
b:1992 prevention of ice formation
IEC 60809 Amd.3 Amendment 3 - Lamps for road vehicles - Dimensional, electrical and
Ed. 2.0 b:2004 luminous requirements
IEC 60809 Ed. 2.2 Lamps for road vehicles - Dimensional, electrical and luminous
b:2002 requirements
Page 40
IEC 60811- 1-4
Amd.1 Ed. 1.0 Amendment No. 1
b:1993
IEC 60811- 3-2 Amendment 2 - Insulating and sheathing materials of electric and optical
Amd.2 Ed. 1.0 cables - Common test methods - Part 3-2: Methods specific to PVC
b:2003 compounds - Loss of mass test - Thermal stability test
IEC 60819-1
Amd.1 Ed. 2.0 Amendment No. 1 to IEC 819-1
b:1996
IEC 60819-1 Ed. Non-cellulosic papers for electrical purposes - Part 1: Definitions and
2.0 b:1995 general requirements
IEC 60819- 3-1 Ed. Non-cellulosic papers for electrical purposes - Part 3: Specifications for
1.0 b:2001 individual materials - Sheet 1: Filled glass paper
Page 41
IEC 60819- 3-2 Ed. Non-cellulosic papers for electrical purposes - Part 3: Specifications for
1.0 b:2001 individual materials - Sheet 2: Hybrid inorganic-organic paper
IEC 60831-1
Amd.1 Ed. 2.0 Amendment 1
b:2002
Shunt power capacitors of the self-healing type for a.c. systems having a
IEC 60831-1 Ed. rated voltage up to and including 1000 V - Part 1: General - Performance,
2.1 b:2002 testing and rating - Safety requirements - Guide for installation and
operation (TITLE TRUNCATED)
Shunt power capacitors of the self-healing type for a.c. systems having a
IEC 60831-2 Ed.
rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing
2.0 b:1995
test and destruction test
IEC 60834-1 Ed. Teleprotection equipment of power systems - Performance and testing -
2.0 b:1999 Part 1: Command systems
IEC 60834-2 Ed. Performance and testing of teleprotection equipment of power systems -
1.0 b:1993 Part 2: Analogue comparison systems
IEC 60838- 2-1 Ed. Miscellaneous lampholders - Part 2: Particular requirements - Section 1:
1.0 b:1994 Lampholders S14
Power cables with extruded insulation and their accessories for rated
IEC 60840 Ed. 3.0
voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test
b:2004
methods and requirements
IEC 60842 Ed. 1.0 Guide for application and operation of turbine-type synchronous machines
b:1988 using hydrogen as a coolant
IEC 60851-1
Amd.1 Ed. 2.0 Amendment 1 - Winding wires - Test methods - Part 1: General
b:2003
Page 42
IEC 60851-2
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60851-2
Amendment 2 - Winding Wires - Test methods - Part 2: Determination of
Amd.2 Ed. 2.0
dimensions
b:2003
IEC 60851-3
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60851-3
Amendment 2 - Winding Wires - Test methods - Part 3: Mechanical
Amd.2 Ed. 2.0
properties
b:2003
IEC 60851-4
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60851-4 Amendment 2 - Winding wires - Test methods - Part 4: Chemical properties
Amd.2 Ed. 2.0
b:2005
IEC 60851-5
Amd.1 Ed. 3.0 Amendment No. 1
b:1997
IEC 60851-5
Amendment 2 - Winding wires - Test methods - Part 5 : Electrical
Amd.2 Ed. 3.0
properties
b:2004
IEC 60851-6
Amd.1 Ed. 2.0 Amendment No. 1
b:1997
IEC 60851-6
Amd.2 Ed. 2.0 Amendment 2 - Winding wires - Test methods - Part 6 : Thermal properties
b:2003
Page 43
IEC 60853-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1994
IEC 60853-1 Ed. Calculation of the cyclic and emergency current rating of cables. Part 1:
1.0 b:1985 Cyclic rating factor for cables up to and including 18/30(36) kV
IEC 60853-3 Ed. Calculation of the cyclic and emergency current rating of cables - Part 3:
1.0 b:2002 Cyclic rating factor for cables of all voltages, with partial drying of the soil
IEC 60867 Ed. 2.0 Insulating liquids - Specifications for unused liquids based on synthetic
b:1993 aromatic hydrocarbons
IEC 60870- 2-1 Ed. Telecontrol equipment and systems - Part 2: Operating conditions -
2.0 b:1995 Section 1: Power supply and electromagnetic compatibility
Shunt capacitors for a.c. power systems having a rated voltage above 1000
IEC 60871-1 Ed.
V - Part 1: General performance, testing and rating - Safety requirements -
2.0 b:1997
Guide for installation and operation
IEC 60871-4 Ed. Shunt capacitors for AC power systems having a rated voltage above 1000
1.0 b:1996 V - Part 4: Internal fuses
IEC 60884-1 Ed. Plugs and socket-outlets for household and similar purposes - Part 1:
3.0 b:2002 General requirements
IEC 60884- 2-1 Ed. Plugs and socket-outlets for household and similar purposes. Part 2:
1.0 b:1987 Particular requirements for fused plugs
IEC 60884- 2-2 Ed. Plugs and socket-outlets for household and similar purposes. Part 2:
1.0 b:1989 Particular requirements for socket-outlets for appliances
IEC 60884- 2-4 Ed. Plugs and socket-outlets for household and similar purposes - Part 2-4:
2.0 b:1999 Particular requirements for plugs and socket-outlets for SELV
IEC 60884- 2-5 Ed. Plugs and socket-outlets for household and similar purposes - Part 2:
1.0 b:1995 Particular requirements for adaptors
Plugs and socket-outlets for household and similar purposes - Part 2-6:
IEC 60884- 2-6 Ed.
Particular requirements for switched socket-outlets with interlock for fixed
1.0 b:1997
electrical installations
IEC 60885-1 Ed. Electrical test methods for electric cables. Part 1: Electrical tests for
1.0 b:1987 cables, cords and wires for voltages up to and including 450/750 V
IEC 60885-3 Ed. Electrical test methods for electric cables. Part 3: Test methods for partial
1.0 b:1988 discharge measurements on lengths of extruded power cables
Page 44
IEC 60889 Ed. 1.0
Hard-drawn aluminium wire for overhead line conductors
b:1987
IEC 60893-2 Ed. Industrial rigid laminated sheets based on thermosetting resins for
2.0 b:2003 electrical purposes - Part 2: Methods of test
IEC 60896-11 Ed. Stationary lead-acid batteries - Part 11: Vented types - General
1.0 b:2002 requirements and methods of tests
IEC 60896-21 Ed. Stationary lead-acid batteries - Part 21: Valve regulated types - Methods
1.0 b:2004 of test
IEC 60896-22 Ed. Stationary lead-acid batteries - Part 22: Valve regulated types -
1.0 b:2004 Requirements
IEC 60898-1
Amd.1 Ed. 1.0 Amendment 1
b:2002
IEC 60898-1
Amd.2 Ed. 1.0 Amendment 2
b:2003
IEC 60898-2
Amd.1 Ed. 1.0 Amendment 1
b:2003
IEC 60898-2 Ed. Circuit-breakers for overcurrent protection for household and similar
1.1 b:2003 installations - Part 2: Circuit-breakers for a.c. and d.c. operation
Page 45
IEC 60901 Amd.1
Amendment No. 1
Ed. 2.0 b:1997
IEC 60906-1 Ed. IEC system of plugs and socket-outlets for household and similar purposes
1.0 b:1986 - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
IEC 60906-2 Ed. IEC system of plugs and socket-outlets for household and similar purposes
2.0 b:1997 - Part 2: Plugs and socket-outlets 15 A 125 V a.c.
IEC System of plugs and socket-outlets for household and similar purposes
IEC 60906-3 Ed.
- Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c.
1.0 b:1994
and d.c.
IEC 60918 Ed. 1.0 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation
b:1987 displacement termination
IEC 60923 Ed. 2.1 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular
b:2001 fluorescent lamps) - Performance requirements
IEC 60925 Ed. 1.2 DC supplied electronic ballasts for tubular fluorescent lamps -
b:2001 Performance requirements
IEC 60927 Amd.2 Amendment 2 - Auxiliaries for lamps - Starting devices (other than glow
Ed. 2.0 b:2004 starters) - Performance requirements
Page 46
IEC 60927 Ed. 2.2 Auxiliaries for lamps - Starting devices (other than glow starters) -
b:2004 Performance requirements
IEC 60929 Ed. 2.0 AC-supplied electronic ballasts for tubular fluorescent lamps -
b:2003 Performance requirements
IEC 60931-1
Amd.1 Ed. 2.0 Amendment 1
b:2002
IEC 60931-3 Ed. Shunt capacitors of the non-self-healing type for AC power systems having
1.0 b:1996 a rated voltage up to and including 1000 V - Part 3: Internal fuses
IEC 60938-1 Ed. Fixed inductors for electromagnetic interference suppression - Part 1:
2.0 en:1999 Generic specification
IEC 60938-2 Ed. Fixed inductors for electromagnetic interference suppression - Part 2:
2.0 en:1999 Sectional specification
IEC 60947-3
Amd.1 Ed. 2.0 Amendment 1
b:2001
IEC 60947-3 Ed. Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors,
2.1 b:2001 switch-disconnectors and fuse-combination units
IEC 60947- 4-1 Ed. Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-
2.1 b:2002 starters - Electromechanical contactors and motor-starters
IEC 60947- 4-2 Ed. Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-
2.1 b:2002 starters - AC semiconductor motor controllers and starters
Page 47
IEC 60947- 4-3 Ed. Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-
1.0 b:1999 starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947- 5-1 Ed. Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices
3.0 b:2003 and switching elements - Electromechanical control circuit devices
IEC 60947- 5-2 Ed. Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices
2.2 b:2004 and switching elements - Proximity switches
IEC 60947- 6-1 Ed. Low-voltage switchgear and controlgear - Part 6-1: Multiple function
1.2 b:1998 equipment - Automatic transfer switching equipment
IEC 60947- 6-2 Ed. Low-voltage switchgear and controlgear - Part 6- 2: Multiple functi on
2.0 b:2002 equipment - Control and protective switching devices (or equipment) (CPS)
IEC 60947- 7-1 Ed. Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment -
2.0 b:2002 Terminal blocks for copper conductors
IEC 60947- 7-2 Ed. Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment -
2.0 b:2002 Protective conductor terminal blocks for copper conductors
IEC 60947- 7-3 Ed. Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment -
1.0 b:2002 Safety requirements for fuse terminal blocks
IEC 60947-8 Ed. Low-voltage switchgear and controlgear - Part 8: Control units for built-in
1.0 b:2003 thermal protection (PTC) for rotating electrical machines
Page 48
IEC 60949 Ed. 1.0 Calculation of thermally permissible short-circuit currents, taking into
b:1988 account non-adiabatic heating effects
IEC 60952-1 Ed. Aircraft batteries - Part 1: General test requirements and performance
2.0 b:2004 levels
IEC 60952-3 Ed. Aircraft batteries - Part 3: Product specification and declaration of design
2.0 b:2004 and performance (DDP)
IEC 60969 Ed. 1.2 Self-ballasted lamps for general lighting services - Performance
b:2001 requirements
IEC 60986 Ed. 2.0 Short-circuit temperature limits of electric cables with rated voltages from
b:2000 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC 60989 Ed. 1.0 Separating transformers, autotransformers, variable transformers and
b:1991 reactors.
IEC 60998-1 Ed. Connecting devices for low-voltage circuits for household and similar
2.0 b:2002 purposes - Part 1: General requirements
Page 49
Connecting devices for low-voltage circuits for household and similar
IEC 60998- 2-1 Ed.
purposes - Part 2-1: Particular requirements for connecting devices as
2.0 b:2002
separate entities with screw-type clamping units
IEC 61007 Ed. 2.0 Transformers and inductors for use in electronic and telecommunication
b:1994 equipment - Measuring methods and test procedures
IEC 61008-1
Amd.1 Ed. 2.0 Amendment 1
b:2002
IEC 61008-1 Ed. Residual current operated circuit-breakers without integral overcurrent
2.1 b:2002 protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61009-1
Amd.1 Ed. 2.0 Amendment 1
b:2002
IEC 61009-1 Ed. Residual current operated circuit-breakers with integral overcurrent
2.1 b:2003 protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61021-1 Ed. Laminated core packages for transformers and inductors used in
1.0 b:1990 telecommunication and electronic equipment - Part 1: Dimensions
Page 50
Protection of structures against lightning - Part 1-2: General principles -
IEC 61024- 1-2 Ed.
Guide B - Design, installation, maintenance and inspection of lightning
1.0 b:1998
protection systems
IEC 61034-1 Ed. Measurement of smoke density of cables burning under defined conditions
2.0 b:1997 - Part 1 Test apparatus
IEC 61035-1 Ed. Specification for conduit fittings for electrical installations - Part 1:
1.0 b:1990 General requirements
IEC 61035- 2-1 Ed. Specification for conduit fittings for electrical installations - Part 2:
1.0 b:1993 Particular specifications - Section 1: Metal conduit fittings
IEC 61035- 2-2 Ed. Specification for conduit fittings for electrical installations - Part 2:
1.0 b:1993 Particular specifications - Section 2: Conduit fittings of insulating material
IEC 61035- 2-4 Ed. Specification for conduit fittings for electrical installations - Part 2:
1.0 b:1995 Particular specifications - Section 4: Conduit fittings of aluminium alloy
IEC 61047 Ed. 2.0 DC or AC supplied electronic step- down convertors for filament lamps -
b:2004 Performance requirements
IEC 61048 Ed. 1.2 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other
b:1999 discharge lamp circuits - General and safety requirements
IEC 61049 Ed. 1.0 Capacitors for use in tubular fluorescent and other discharge lamp circuits.
b:1991 Performance requirements
Transformers for tubular discharge lamps having a no- load output voltage
IEC 61050 Ed. 1.0
exceeding 1000 V (generally called neon-transformers). General and safety
b:1991
requirements
IEC 61056-1 Ed. General purpose lead-acid batteries (valve-regulated types) - Part 1:
2.0 b:2002 General requirements, functional characteristics - Methods of test
IEC 61056-2 Ed. General purpose lead-acid batteries (valve-regulated types) - Part 2:
2.0 b:2002 Dimensions, terminals and marking
IEC 61058-1
Amd.1 Ed. 3.0 Amendment 1
b:2001
Page 51
IEC 61058- 2-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1995
IEC 61058- 2-1 Ed. Switches for appliances - Part 2-1: Particular requirements for cord
1.0 b:1992 switches
IEC 61058- 2-4 Ed. Switches for appliances - Part 2-4: Particular requirements for
1.1 b:2003 independently mounted switches
IEC 61058- 2-5 Ed. Switches for appliances - Part 2-5: Particular requirements for change-
1.0 b:1994 over selectors
IEC 61067-1 Ed. Specification for glass and glass polyester fibre woven tapes - Part 1:
1.0 b:1991 Definitions, classification and general requirements
IEC 61067- 3-1 Ed. Glass and glass polyester fibre woven tapes - Part 3: Specifications for
1.0 b:1995 individual materials - Sheet 1: Type 1, 2 and 3 tapes
IEC 61068-1 Ed. Specification for polyester fibre woven tapes - Part 1: Definitions,
1.0 b:1991 designation and general requirements
IEC 61068- 3-1 Ed. Polyester fibre woven tapes - Part 3: Specifications for individual materials
2.0 b:1995 - Sheet 1: Tapes woven on conventional or shuttleless looms
IEC 61082-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1995
IEC 61082-1
Amd.2 Ed. 1.0 Amendment No. 2 to IEC 1082-1
b:1996
IEC 61084-1
Amd.1 Ed. 1.0 Amendment No. 1
b:1993
IEC 61084-1 Ed. Cable trunking and ducting systems for electrical installations - Part 1:
1.0 b:1991 General requirements
Cable trunking and ducting systems for electrical installations - Part 2-2:
IEC 61084- 2-2 Ed.
Particular requirements - Cable trunking systems and cable ducting
1.0 b:2003
systems intended for underfloor and flushfloor installations
IEC 61084- 2-4 Ed. Cable trunking and ducting systems for electrical installations - Part 2:
1.0 b:1996 Particular requirements - Section 4: Service poles
IEC 61086-1 Ed. "Coatings for loaded printed wire boards (conformal coatings) - Part 1:
2.0 b:2004 Definitions, classification and general requirements"
Page 52
IEC 61086-2 Ed. Coatings for loaded printed wire boards (conformal coatings) - Part 2:
2.0 b:2004 Methods of test
"Coatings for loaded printed wire boards (conformal coatings) - Part 3-1:
IEC 61086- 3-1 Ed.
Specifications for individual materials - Coatings for general purpose
2.0 b:2004
(Class 1), high reliability (Class 2) and aerospace (Class 3)"
IEC 61100 Ed. 1.0 Classification of insulating liquids according to fire-point and net calorific
b:1992 value
IEC 61109 Ed. 1.0 Composite insulators for a.c. overhead lines with a nominal voltage greater
b:1992 than 1000 V - Definitions, test methods and acceptance criteria
IEC 61148 Ed. 1.0 Terminal markings for valve device stacks and assemblies and for power
b:1992 convertor equipment
IEC 61166 Ed. 1.0 High-voltage alternating current circuit-breakers - Guide for seismic
b:1993 qualification of high-voltage alternating current circuit-breakers
Page 53
IEC 61167 Amd.2
Amendment No. 2
Ed. 1.0 b:1997
IEC 61179 Ed. 1.0 Helical-scan digital composite video cassette recording system using 19
b:1993 mm magnetic tape, format D2 (NTSC, PAL, PAL-M)
IEC 61181 Ed. 1.0 Impregnated insulating materials - Application of dissolved gas analysis
b:1993 (DGA) to factory tests on electrical equipment
IEC 61185 Ed. 1.0 Magnetic oxide cores (ETD-cores) intended for use in power supply
b:1992 applications - Dimensions
IEC 61197 Ed. 1.0 Insulating liquids - Linear flame propagation - Test method using a glass-
b:1993 fibre tape
IEC 61203 Ed. 1.0 Synthetic organic esters for electrical purposes - Guide for maintenance of
b:1992 transformer esters in equipment
IEC 61204 Amd.1 Amendment 1 Low-voltage power supply devices, d.c. output - Performance
Ed. 1.0 b:2001 characteristics
IEC 61204 Ed. 1.1 Low-voltage power supply devices, d.c. output - Performance
b:2001 characteristics
IEC 61204-3 Ed. Low-voltage power supplies, d.c. output - Part 3: Electromagnetic
1.0 b:2000 compatibility (EMC)
IEC 61204-6 Ed. Low-voltage power supplies, d.c. output - Part 6: Requirements for low-
1.0 b:2000 voltage power supplies of assessed performance
IEC 61210 Ed. 1.0 Connecting devices - Flat quick-connect terminations for electrical copper
b:1993 conductors - Safety requirements
Page 54
IEC 61211 Ed. 2.0 Insulators of ceramic material or glass for overhead lines with a nominal
b:2004 voltage greater than 1 000 V - Impulse puncture testing in air
IEC 61212-1 Ed. Industrial rigid round laminated tubes and rods based on thermosetti ng
1.0 b:1995 resins for electrical purposes - Part 1: General requirements
IEC 61219 Ed. 1.0 Live working - Earthing or earthing and short-circuiting equipment using
b:1993 lances as a short-circuiting device - Lance earthing
IEC 61221 Ed. 2.0 Petroleum products and lubricants - Triaryl phosphate ester turbine control
b:2004 fluids (category ISO-L-TCD) - Specifications
IEC 61230 Ed. 1.0 Live working - Portable equipment for earthing or earthing and short-
b:1993 circuiting
IEC 61241-0 Ed. Electrical apparatus for use in the presence of combustible dust - Part 0:
1.0 b:2004 General requirements
IEC 61241-1 Ed. "Electrical apparatus for use in the presence of combustible dust - Part 1:
1.0 b:2004 Protection by enclosures ""tD"""
IEC 61241-10 Ed. Electrical apparatus for use in the presence of combustible dust - Part 10:
1.0 b:2004 Classification of areas where combustible dusts are or may be present
IEC 61241-14 Ed. Electrical apparatus for use in the presence of combustible dust - Part 14:
1.0 b:2004 Selection and installation
Electrical apparatus for use in the presence of combustible dust - Part 17:
IEC 61241-17 Ed. Inspecti on and maintenance of electrical installations in hazardous areas
1.0 b:2005 (other than mines)
IEC 61241-18 Ed. Electrical apparatus for use in the presence of combustible dust - Part 18:
1.0 b:2004 Protection by encapsulation 'mD'
Page 55
Electrical apparatus for use in the presence of combustible dust - Part 2:
IEC 61241- 2-3 Ed.
Test methods - Section 3: Method for determining minimum ignition energy
1.0 b:1994
of dust/air mixtures
IEC 61241-4 Ed. Electrical apparatus for use in the presence of combustible dust - Part 4:
1.0 b:2001 Type of protection "pD"
IEC 61243-1 Ed. Live working - Voltage detectors - Part 1: Capacitive type to be used for
2.0 b:2003 voltages exceeding 1 kV a.c.
IEC 61246 Ed. 1.1 Magnetic oxide cores (E-cores) of rectangular cross-section and
b:2002 associated parts - Dimensions
IEC 61248-1 Ed. Transformers and inductors for use in electronic and telecommunication
1.0 b:1996 equipment - Part 1: Generic specification
IEC 61287-1 Ed. Power convertors installed on board rolling stock - Part 1: Characteristics
1.0 b:1995 and test methods
IEC 61293 Ed. 1.0 Marking of electrical equipment with ratings related to electrical supply -
b:1994 Safety requirements
IEC 61312-1 Ed. Protection against lightning electromagnetic impulse - Part 1: General
1.0 b:1995 principles
Page 56
IEC 61316 Ed. 2.0
Industrial cable reels
b:1999
IEC 61334- 3-1 Ed. Distribution automation using distribution line carrier systems - Part 3-1:
1.0 b:1998 Mains signalling requirements - Frequency bands and output levels
IEC 61334- 4-61 Distribution automation using distribution line carrier systems - Part 4-61:
Ed. 1.0 b:1998 Data communication protocols - Network layer - Connectionless protocol
IEC 61334-6 Ed. Distribution automation using distribution line carrier systems - Part 6: A-
1.0 b:2000 XDR encoding rule
IEC 61347-1
Amendment 1 - Lamp controlgear - Part 1: General and safety
Amd.1 Ed. 1.0
requirements
b:2003
IEC 61347- 2-1 Ed. Lamp controlgear - Part 2-1: Particular requirements for starting devices
1.0 b:2000 (other than glow starters)
Page 57
IEC 61347- 2-11 Lamp controlgear - Part 2-11: Particular requirements for miscellaneous
Ed. 1.0 b:2001 electronic circuits used with luminaires
IEC 61347- 2-2 Ed. Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c.
1.0 b:2000 supplied electronic step-down convertors for filament lamps
IEC 61347- 2-3 Ed. Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied
1.1 b:2004 electronic ballasts for fluorescent lamps
IEC 61347- 2-4 Ed. Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied
1.0 b:2000 electronic ballasts for general lighting
IEC 61347- 2-5 Ed. Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied
1.0 b:2000 electronic ballasts for public transport lighting
IEC 61347- 2-6 Ed. Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied
1.0 b:2000 electronic ballasts for aircraft lighting
IEC 61347- 2-7 Ed. Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied
1.0 b:2000 electronic ballasts for emergency lighting
IEC 61347- 2-8 Ed. Lamp controlgear - Part 2-8: Particular requirements for ballasts for
1.0 b:2000 fluorescent lamps
IEC 61347- 2-9 Ed. Lamp controlgear - Part 2-9: Particular requirements for ballasts for
1.1 b:2003 discharge lamps (excluding fluorescent lamps)
IEC 61377 Ed. 1.0 Electric traction - Rolling stock - Combined testing of inverter fed
b:1996 alternating current motors and their control
IEC 61386-1
Amd.1 Ed. 1.0 Amendment 1
b:2000
IEC 61386-21 Ed. Conduit systems for cable management - Part 21: Particular requirements -
1.0 b:2002 Rigid conduit systems
IEC 61386-22 Ed. Conduit Systems for cable management - Part 22: Particular requirements
1.0 b:2002 - Pliable conduit systems
IEC 61386-23 Ed. Conduit systems for cable management - Part 23: Particular requirements -
1.0 b:2002 Flexible conduit systems
IEC 61386-24 Ed. Conduit systems for cable management - Part 24: Particular requirements -
1.0 b:2004 Conduit systems buried underground
Page 58
IEC 61395 Ed. 1.0 Overhead electrical conductors - Creep test procedures for stranded
b:1998 conductors
IEC 61427 Ed. 1.0 Secondary cells and batteries for solar photovoltaic energy systems -
b:1999 General requirements and methods of test
IEC 61443 Ed. 1.0 Short-circuit temperature limits of electric cables with rated voltages
b:1999 above 30 kV (Um = 36 kV)
IEC 61466-1 Ed. Composite string insulator units for overhead lines with a nominal voltage
1.0 b:1997 greater than 1000 V - Part 1: Standard strength classes and end fittings
IEC 61466-2
Amd.1 Ed. 1.0 Amendment 1
b:2002
IEC 61466-2 Ed. Composite string insulator units for overhead lines with a nominal voltage
1.1 b:2002 greater than 1 000 V - Part 2: Dimensional and electrical characteristics
IEC 61497 Ed. 1.0 Nuclear power plants - Electrical interlocks for functions important to
b:1998 safety - Recommendations for design and implementation
IEC 61540 Ed. 1.1 Electrical accessories - Portable residual current devices without integral
b:1999 overcurrent protection for household and similar use (PRCDs)
IEC 61543 Amd.1 Amendment 1 - Residual current-operated protective devices (RCDs) for
Ed. 1.0 b:2004 household and similar use - Electromagnetic compatibility
IEC 61543 Ed. 1.0 Residual current-operated protective devices (RCDs) for household and
b:1995 similar use - Electromagnetic compatibility
IEC 61558-1
Amd.1 Ed. 1.0 Amendment 1
b:1998
Page 59
IEC 61558-1 Ed. Safety of power transformers, power supply units and similar - Part 1:
1.1 b:1998 General requirements and tests
IEC 61558- 2-1 Ed. Safety of power transformers, power suply units and similar - Part 2:
1.0 b:1997 Particular requirements for separating transformers for general use
IEC 61558- 2-12 Safety of power transformers, power supply units and similar devices -
Ed. 1.0 b:2001 Part 2-12: Particular requirements for constant voltage transformers
IEC 61558- 2-13 Safety of power transformers, power supply units and similar devices -
Ed. 1.0 b:1999 Part 2-13: Particular requirements for auto-transformers for general use
Safety of power transformers, power supply units and similar - Part 2-15:
IEC 61558- 2-15
Particular requirements for isolating transformers for the supply of medical
Ed. 1.0 b:1999
locations
IEC 61558- 2-17 Safety of power transformers, power supply units and similar - Part 2:
Ed. 1.0 b:1997 Particular requirements for transformers for switch mode power supplies
IEC 61558- 2-2 Ed. Safety of power transformers, power supply units and similar - Part 2-2:
1.0 b:1997 Particular requirements for control transformers
IEC 61558- 2-20 Safety of power transformers, power supply units and similar devices -
Ed. 1.0 b:2000 Part 2-20: Particular requirements for small reactors
IEC 61558- 2-23 Safety of power transformers, power supply units and similar devices -
Ed. 1.0 b:2000 Part 2-23: Particular requirements for transformers for construction sites
IEC 61558- 2-4 Ed. Safety of power transformers, power supply units and similar - Part 2:
1.0 b:1997 Particular requirements for isolating transformers for general use
IEC 61558- 2-5 Ed. Safety of power transformers, power supply units and similar - Part 2-5:
1.0 b:1997 Particular requirements for shaver transformers and shaver supply units
IEC 61558- 2-6 Ed. Safety of power transformers, power supply units and similar - Part 2:
1.0 b:1997 Particular requirements for safety isolating transformers for general use
IEC 61558- 2-7 Ed. Safety of power transformers, power supply units and similar - Part 2:
1.0 b:1997 Particular requirements for transformers for toys
IEC 61558- 2-8 Ed. Safety of small power transformers, power supply units and similar - Part
1.0 b:1998 2-8: Particular requirements for bell and chime transformers
IEC 61596 Ed. 1.0 Magnetic oxide EP-cores and associated parts for use in inductors and
b:1995 transformers - Dimensions
IEC 61628-1 Ed. Corrugated pressboard and presspaper for electrical purposes - Part 1:
1.0 b:1997 Definitions, designations and general requirements
Page 60
IEC 61628-2 Ed. Corrugated pressboard and presspaper for electrical purposes - Part 2:
1.0 b:1998 Methods of test
IEC 61629-1 Ed. Aramid pressboard for electrical purposes - Part 1: Definitions,
1.0 b:1996 designations and general requirements
IEC 61642 Ed. 1.0 Industrial a.c. networks affected by harmonics - Application of filters and
b:1997 shunt capacitors
IEC 61643-1
Amd.1 Ed. 1.0 Amendment 1
b:2001
IEC 61643-1 Ed. Surge protective devices connected to low-voltage power distribution
1.1 b:2002 systems - Part 1: Performance requirements and testing methods
Low voltage surge protective devices - Part 21: Surge protective devices
IEC 61643-21 Ed.
connected to telecommunications and signalling networks - Performance
1.0 b:2000
requirements and testing methods
IEC 61663-2 Ed. Lightning protection - Telecommunication lines - Part 2: Lines using
1.0 b:2001 metallic conductors
IEC 61800-3 Ed. Adjustable speed electrical power drive systems - Part 3: EMC
2.0 b:2004 requirements and specific test methods
Page 61
Adjustable speed electrical power drive systems - Part 4: General
IEC 61800-4 Ed.
requirements - Rating specifications for a.c. power drive systems above 1
1.0 b:2002
000 V a.c. and not exceeding 35 kV
IEC 61800- 5-1 Ed. Adjustable speed electrical power drive systems - Part 5-1: Safety
1.0 b:2003 requirements - Electrical, thermal and energy
IEC 61803 Ed. 1.0 Determination of power losses in high-voltage direct current (HVDC)
b:1999 converter stations
IEC 61810-1 Ed. Electromechanical elementary relays - Part 1: General and safety
2.0 b:2004 requirements
IEC 61810-7 Ed. Electromechanical all-or-nothing relays - Part 7: Test and measurement
1.0 b:1997 procedures
IEC 61811-1 Ed. Electromechanical non- specified time all-or-nothing relays of assessed
1.0 b:1999 quality - Part 1: Generic specification
IEC 61811-10 Ed. Electromechanical elementary relays of assessed quality - Part 10:
1.0 en:2002 Sectional specification - Relays for industrial application
IEC 61811-11 Ed. Electromechanical elementary relays of assessed quality - Part 11: Blank
1.0 en:2002 detail specification - Relays for industrial application
IEC 61811-50 Ed. Electromechanical all-or-nothing relays - Part 50: Sectional specification -
2.0 en:2002 Electromechanical all-or-nothing telecom relays of assessed quality
IEC 61823 Ed. 1.0 Electrical installations for lighting and beaconing of aerodromes - AGL
en:2002 series transformers
IEC 61839 Ed. 1.0 Nuclear power plants - Design of control rooms - Functional analysis and
b:2000 assignment
IEC 61843 Ed. 1.0 Measuring method for the level of intermodulation products generated in a
b:1997 gyromagnetic device
Page 62
IEC 61854 Ed. 1.0
Overhead lines - Requirements and tests for spacers
b:1998
IEC 61857-1 Ed. Electrical insulation systems - Procedures for thermal evaluation - Part 1:
2.0 b:2004 General requirements - Low-voltage
IEC 61858 Ed. 2.0 Electrical insulation systems - Thermal evaluation of modifications to an
b:2004 established wire-wound EIS
IEC 61865 Ed. 1.0 Overhead lines - Calculation of the electrical component of distance
b:2001 between live parts and obstacles - Method of calculation
IEC 61892-6 Ed. Mobile and fixed offshore units - Electrical installations - Part 6:
1.0 en:1999 Installation
IEC 61897 Ed. 1.0 Overhead lines - Requirements and tests for Stockbridge type aeolian
b:1998 vibration dampers
IEC 61950 Ed. 1.0 Cable management systems - Specification for conduits fittings for
b:1997 electrical installations for extra-heavy duty metal conduit
IEC 61952 Ed. 1.0 Insulators for overhead lines - Composite line post insulators for a.c. with
b:2002 a nominal voltage greater than 1000 V
IEC 61954 Ed. 1.1 Power electronics for electrical transmission and distribution systems -
b:2003 Testing of thyristor valves for static VAR compensators
IEC 61972 Ed. 1.0 Method for determining losses and efficiency of three- phase cage induction
b:2002 motors
IEC 61982-2 Ed. Secondary batteries for the propulsion of electric road vehicles - Part 2:
1.0 b:2002 Dynamic discharge performance test and dynamic endurance test
Page 63
IEC 61982-3 Ed. Secondary batteries for the propulsion of electric road vehicles - Part 3:
1.0 b:2001 Performance and life testing (traffic compatible, urban use vehicles)
IEC 61986 Ed. 1.0 Rotating electrical machines - Equivalent loading and super-position
b:2002 techniques - Indirect testing to determine temperature rise
IEC 62013-1 Ed. Caplights for use in mines susceptible to firedamp - Part 1: General
1.0 b:1999 requirements - Construction and testing in relation to the risk of explosion
IEC 62013-2 Ed. Caplights for use in mines susceptible to firedamp - Part 2: Performance
1.0 b:2000 and other safety-related matters
IEC 62019 Ed. 1.1 Electrical accessories - Circuit-breakers and similar equipment for
b:2003 household use - Auxiliary contact units
IEC 62020 Amd.1 Amendment 1 - Electrical accessories - Residual current monitors for
Ed. 1.0 b:2003 household and similar uses (RCMs)
IEC 62020 Ed. 1.1 Electrical accessories - Residual current monitors for household and
b:2003 similar uses (RCMs)
IEC 62024-1 Ed. High frequency inductive components - Electrical characteristics and
1.0 b:2002 measuring methods - Part 1: Nanohenry range chip inductor
Page 64
IEC 62026-5 Ed. Low-voltage switchgear and controlgear - Controller-device interfaces
1.0 b:2000 (CDIs) - Part 5: Smart distributed system (SDS)
IEC 62035 Amd.1 Amendment 1 - Discharge lamps (excluding fluorescent lamps) - Safety
Ed. 1.0 b:2003 specifications
IEC 62040- 1-1 Ed. Uninterruptible power systems (UPS) - Part 1-1: General and safety
1.0 b:2004 requirements for UPS used in operator access areas
IEC 62040- 1-2 Ed. Uninterruptible power systems (UPS) - Part 1-2: General and safety
1.0 b:2004 requirements for UPS used in restricted access locations
IEC 62040-3 Ed. Uninterruptible power systems (UPS) - Part 3: Method of specifying the
1.0 b:1999 performance and test requirements
IEC 62041 Ed. 1.0 "Power transformers, power supply units, reactors and similar products -
b:2003 EMC requirements "
IEC 62044-1 Ed. Cores made of soft magnetic materials - Measuring methods - Part 1:
1.0 b:2002 Generic specification
IEC 62044-3 Ed. Cores made of soft magnetic materials - Measuring methods - Part 3:
1.0 b:2000 Magnetic properties at high excitation level
Power cables with extruded insulation and their accessories for rated
IEC 62067 Ed. 1.0
voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test
b:2001
methods and requirements
IEC 62068-1 Ed. Electrical insulation systems - Electrical stresses produced by repetitive
1.0 b:2003 impulses - Part 1: General method of evaluation of electrical endurance
IEC 62086-1 Ed. Electrical apparatus for explosive gas atmospheres - Electrical resistance
1.0 b:2001 trace heating - Part 1: General and testing requirements
IEC 62094-1 Ed. Indicator light units for household and similar fixed-electrical installations
1.0 b:2002 - Part 1: General requirements
Page 65
Secondary cells and batteries containing alkaline or other non-acid
IEC 62133 Ed. 1.0
electrolytes - Safety requirements for portable sealed secondary cells, and
b:2002
for batteries made from them, for use in portable applications
IEC 62155 Ed. 1.0 Hollow pressurized and unpressurized ceramic and glass insulators for use
b:2003 in electrical equipment with rated voltages greater than 1 000 V
IEC 62208 Ed. 1.0 Empty enclosures for low-voltage switchgear and controlgear assemblies -
b:2002 General requirements
IEC 62219 Ed. 1.0 Overhead electrical conductors - Formed wire, concentric lay, stranded
b:2002 conductors
IEC 62262 Ed. 1.0 Degrees of protection provided by enclosures for electrical equipment
b:2002 against external mechanical impacts (IK code)
IEC 62271- 100 Ed. High-voltage switchgear and controlgear - Part 100: High-voltage
1.1 b:2003 alternating-current circuit-breakers
IEC 62271- 102 Ed. High-voltage switchgear and controlgear - Part 102: Alternating current
1.0 b:2003 disconnectors and earthing switches
IEC 62271- 105 Ed. High-voltage switchgear and controlgear - Part 105: Alternating current
1.0 b:2002 switch-fuse combinations
IEC 62271-2 Ed. High-voltage switchgear and controlgear - Part 2: Seismic qualification for
1.0 b:2003 rated voltages of 72,5 kV and above
IEC 62271- 203 Ed. High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-
1.0 b:2003 enclosed switchgear for rated voltages above 52 kV
IEC 62281 Ed. 1.0 Safety of primary and secondary lithium cells and batteries during
b:2004 transport
Page 66
Reciprocating internal combustion engine driven alternating current
IEC 88528-11 Ed.
generating sets - Part 11: Rotary uninterruptible power systems -
1.0 en:2004
Performance requirements and test methods
IEC/PAS 62001 Guide to the specification and design evaluation of a.c. filters for HVDC
Ed. 1.0 en:2004 systems
IEC/PAS 62055-41 Electricity metering - Payment metering systems - Part 41: Standard
Ed. 1.0 en:2003 Transfer Specification
IEC/PAS 62271-
High-voltage switchgear and controlgear - Part 109: Alternating-current
109 Ed. 1.0
series capacitor by-pass switches
en:2002
IEC/PAS 62323 Dimensions of half pot cores made of magnetic oxides for inductive
Ed. 1.0 en:2002 proximity switches
IEC/TR 60079-13 Electrical apparatus for explosive gas atmosphere - Part 13: Construction
Ed. 1.0 b:1982 and use of rooms or buildings protected by pressurization
IEC/TR 60079-16 Electrical apparatus for explosive gas atmospheres. Part 16: Artificial
Ed. 1.0 b:1990 ventilation for the protection of analyser(s) houses
IEC/TR 60079-20 "Electrical apparatus for explosive gas atmospheres - Part 20: Data for
Ed. 1.0 b:1996 flammable gases and vapours, relating to the use of electrical apparatus"
IEC/TR 60083 Ed. Plugs and socket-outlets for domestic and similar general use standardized
4.0 b:2004 in member countries of IEC
IEC/TR 60099-3
Surge arresters. Part 3: Artificial pollution testing of surge arresters
Ed. 1.0 b:1990
IEC/TR 60279 Ed. Measurement of the winding resistance of an a.c. machine during operation
1.0 b:1969 at alternative voltage
IEC/TR 60575 Ed. Thermal-mechanical performance test and mechanical performance test on
1.0 b:1977 string insulator units
IEC/TR 60638 Ed. Criteria for assessing and coding of the commutation of rotating electrical
1.0 b:1979 machines for traction
IEC/TR 60648 Ed. Method of test for coefficients of friction of plastic film and sheeting for
1.0 b:1979 use as electrical insulation
Page 67
IEC/TR 60649 Ed.
Calculation of maximum external diameter of cables for indoor installations
1.0 b:1979
IEC/TR 60664-2-2 Insulation coordination for equipment within low-voltage systems - Part 2-
Ed. 1.0 en:2002 2: Interface considerations - Application guide
IEC/TR 60664-4 Insulation coordination for equipment within low-voltage systems - Part 4:
Ed. 1.0 b:1997 Consideration of high-frequency voltage stress
IEC/TR 60668 Ed. Dimensions of panel areas and cut-outs for panel and rack-mounted
1.0 b:1980 industrial-process measurement and control instruments
IEC/TR 60755
Amd.1 Ed. 1.0 Amendment No. 1
b:1988
IEC/TR 60755
Amd.2 Ed. 1.0 Amendment No. 2
b:1992
IEC/TR 60797 Ed. Residual strength of string insulator units of glass or ceramic material for
1.0 b:1984 overhead lines after mechanical damage of the dielectric
IEC/TR 60890
Amd.1 Ed. 1.0 Amendment No. 1
b:1995
IEC/TR 60894 Ed. Guide for test procedure for the measurement of loss tangent of coils and
1.0 b:1987 bars for machine windings
Page 68
IEC/TR 60919-2 Performance of high-voltage d.c. (HVDC) systems - Part 2: Faults and
Ed. 1.0 b:1990 switching
IEC/TR 60943 Ed. "Guidance concerning the permissible temperature rise for parts of
2.0 b:1998 electrical equipment, in particular for terminals "
IEC/TR 60972
Amd.1 Ed. 1.0 Amendment No. 1
b:1991
IEC/TR 61015 Ed. Brush-holders for electrical machines. Guide to the measurement of the
1.0 b:1990 static thrust applied to brushes
IEC/TR 61056-3 Portable lead-acid cells and batteries (Valve-regulated types) - Part 3:
Ed. 1.0 b:1991 Safety recommendations for use in electric appliances
IEC/TR 61082-6
Preparation of documents used in electrotechnology - Part 6: Index
Ed. 1.0 b:1997
IEC/TR 61117 Ed. A method for assessing the short-circuit withstand strength of partially
1.0 b:1992 type-tested assemblies (PTTA)
IEC/TR 61127 Ed. "High pressure xenon short arc lamps - Dimensional, electrical and
1.0 b:1992 photometric data and cap types"
IEC/TR 61341 Ed. Method of measurement of centre beam intensity and beam angle(s) of
1.0 b:1994 reflector lamps
IEC/TR 61597 Ed. Overhead electrical conductors - Calculation methods for stranded bare
1.0 b:1995 conductors
IEC/TR 61641 Ed. Enclosed low-voltage switchgear and controlgear assemblies - Guide for
1.0 b:1996 testing under conditions of arcing due to an internal fault
Page 69
IEC/TR 61800-6 Adjustable speed electrical power drive systems - Part 6: Guide for
Ed. 1.0 b:2003 determination of types of load duty and corresponding current ratings
IEC/TR 61955 Ed. Primary batteries - Summary of research and actions limiting risks to
1.0 en:1998 reversed installation of primary batteries
IEC/TR 62060 Ed. Secondary cells and batteries - Monitoring of lead acid stationary batteries
1.0 b:2001 - User guide
IEC/TR 62062 Ed. Results of the Round Robin series of tests to evaluate proposed
1.0 b:2002 amendments to IEC 60112
IEC/TR 62066 Ed. Surge overvoltages and surge protection in low-voltage a.c. power systems
1.0 en:2002 - General basic information
IEC/TR 62139 Ed. Guidelines for the addition of environmental aspects in product standards
1.0 b:2004 specitif to TC 23
IEC/TR 62271-308 High-voltage switchgear and controlgear - Part 308: Guide for
Ed. 1.0 b:2002 asymmetrical short-circuit breaking test duty T100a
IEC/TR 62271-310 "High-voltage switchgear and controlgear - Part 310: Electrical endurance
Ed. 1.0 b:2004 testing for circuit-breakers of rated voltage 72,5 kV and above"
IEC/TS 60034-16-2 Rotating electrical machines - Part 16: Excitation systems for synchronous
Ed. 1.0 b:1991 machines - Chapter 2: Models for power system studies
IEC/TS 60034-16-3 Rotating electrical machines - Part 16: Excitation systems for synchronous
Ed. 1.0 b:1996 machines - Section 3: Dynamic performance
IEC/TS 60034-17 Rotating electrical machines - Part 17: Cage induction motors when fed
Ed. 3.0 b:2002 from converters - Application guide
Page 70
Rotating electrical machines - Part 18: Functional evaluation of insulation
IEC/TS 60034-18- systems - Section 33: Test procedures for form-wound windings -
33 Ed. 1.0 b:1995 Multifactor functional evaluation - Endurance under combined thermal and
electrical stresses of i (TITLE TRUNCATED)
IEC/TS 60034-20-1
Rotating electrical machines - Part 20-1: Control motors - Stepping motors
Ed. 1.0 b:2002
IEC/TS 60034-23 Rotating electrical machines - Part 23: Specification for the refurbishing of
Ed. 1.0 b:2003 rotating electrical machines
Rotating electrical machines - Part 25: Guide for the design and
IEC/TS 60034-25
performance of cage induction motors specifically designed for converter
Ed. 1.0 en:2004
supply
IEC/TS 60034-26 Rotating electrical machines - Part 26: Effects of unbalanced voltages on
Ed. 1.0 b:2002 the performance of three-phase induction motors
IEC/TS 60071-5 Insulation co-ordination - Part 5: Procedures for high-voltage direct current
Ed. 1.0 en:2002 (HVDC) converter stations
IEC/TS 60076-14 Power transformers - Part 14: Design and application of liquid-immersed
Ed. 1.0 b:2004 power transformers using high-temperature insulation materials
IEC/TS 60079-27 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus
Ed. 1.0 b:2002 intrinsically safe concept (FISCO)
IEC/TS 60110-2 "Power capacitors for induction heating installations - Part 2: Ageing test,
Ed. 1.0 b:2000 destruction test and requirements for disconnecting internal fuses "
IEC/TS 60146-6 Semiconductor convertors - Part 6: Application guide for the protection of
Ed. 1.0 b:1992 semiconductor convertors against overcurrent by fuses
Electric traction - Rotating electrical machines for rail and road vehicles -
IEC/TS 60349-3
Part 3: Determination of the total losses of convertor-fed alternating
Ed. 1.0 b:1995
current motors by summation of the component losses
IEC/TS 60695-5-2 Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent -
Ed. 2.0 b:2002 Summary and relevance of test methods
Fire hazard testing - Part 6: Guidance and test methods on the assessment
IEC/TS 60695-6-30 of obscuration hazards of vision caused by smoke opacity from
Ed. 1.0 b:1996 electrotechnical products involved in fires - Section 30: Small scale static
method. Determination of (TITLE TRUNCATED)
IEC/TS 60695-7-3 Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and
Ed. 2.0 b:2004 interpretation of test results
IEC/TS 60695-7-51 Fire hazard testing - Part 7-51: Toxicity of fire effluent - Estimation of
Ed. 1.0 b:2002 toxic potency: Calculation and interpretation of test results
IEC/TS 60871-2 Shunt capacitors for a.c. power systems having a rated voltage above 1
Ed. 2.0 b:1999 000 V - Part 2: Endurance testing
IEC/TS 60871-3 Shunt capacitors for a.c. power systems having a rated voltage above 1000
Ed. 1.0 b:1996 V - Part 3: Protection of shunt capacitors and shunt capacitor banks
Page 71
IEC/TS 60919-3 Performance of high-voltage direct current (HVDC) systems - Part 3:
Ed. 1.0 b:1999 Dynamic conditions
IEC/TS 60932 Ed. Additional requirements for enclosed switchgear and controlgear from 1 kV
1.0 b:1988 to 72.5 kV to be used in severe climatic conditions
IEC/TS 61085 Ed. General considerations for telecommunication services for electric power
1.0 b:1992 systems
IEC/TS 61200-52 Electrical installation guide - Part 52: Selection and erection of electrical
Ed. 1.0 b:1993 equipment - Wiring systems
IEC/TS 61200-53 Electrical installation guide - Part 53: Selection and erection of electrical
Ed. 1.0 b:1994 equipment - Switchgear and controlgear
IEC/TS 61245 Ed. Artificial pollution tests on high-voltage insulators to be used on d.c.
1.0 b:1993 systems
IEC/TS 61287-2 Power convertors installed on board railway rolling stock - Part 2:
Ed. 1.0 b:2001 Additional technical information
IEC/TS 61334-5-2 Distribution automation using distribution line carrier systems - Part 5-2:
Ed. 1.0 b:1998 Lower layer profiles - Frequency shift keying (FSK) profile
IEC/TS 61394 Ed. "Overhead lines - Characteristics of greases for aluminium, aluminium
1.0 b:1997 alloy and steel bare conductors "
IEC/TS 61423-2 Heating cables for industrial applications - Part 2: Constructional and
Ed. 1.0 b:1995 material requirements
Secondary cells and batteries - Test methods for checking the performance
IEC/TS 61430 Ed.
of devices designed for reducing explosion hazards - Lead-acid starter
1.0 b:1997
batteries
IEC/TS 61438 Ed. Possible safety and health hazards in the use of alkaline secondary cells
1.0 b:1996 and batteries - Guide to equipment manufacturers and users
Page 72
"Composite insulators - Hollow insulators for use in outdoor and indoor
IEC/TS 61462 Ed.
electrical equipment - Definitions, test methods, acceptance criteria and
1.0 b:1998
design recommendations "
IEC/TS 61463
Amd.1 Ed. 1.0 Amendment 1
b:2000
IEC/TS 61467 Ed. Insulators for overhead lines with a nominal voltage above 1000 V - A.C.
1.0 b:1997 power arc tests on insulator sets
IEC/TS 61639 Ed. "Direct connection between power transformers and gas-insulated metal-
1.0 b:1996 enclosed switchgear for rated voltages of 72,5 kV and above "
IEC/TS 61640 Ed. "Rigid high-voltage, gas-insulated transmission lines for rated voltage of
1.0 b:1998 72,5 kV and above"
IEC/TS 61915 Ed. Low-voltage switchgear and controlgear - Principles for the development of
1.0 b:2003 device profiles for networked industrial devices
IEC/TS 62091 Ed. Low-voltage switchgear and controlgear - Controllers for drivers of
1.0 b:2003 stationary fire pumps
Page 73