Sie sind auf Seite 1von 4

REPfllR

PflRTS
@ BOSCH.*.** ****** ** ● ● ● ● ● ● ● ● ● ● ● ● ● ●

I
MODEL SV-40
VARIABLE VOLUME
VANE TYPE PUMP

FLANGE MOUNTED

WHEN ORDERING PARTS, FURNISH:

1. COMPLETE CODE NUMBER


2. PARTS REQU I RED
3. SHIPPING INSTRUCTIONS

WRITE FACTORY FOR NEAREST AUTHORIZED


PARTS AND SERVICE CENTER.

PUMP CODING
PAV-PNRO-40HRM-11

I
1

N--NO VOLUME CONTROL


I
C--FLANGE CONNECTION R--RIGHT HAND ROTATION
{
-11--BI -MErAL PORT PLATES
S1 DE PORTS
S--SCREW VOLUME CONTROL L--LEFT HAND ROTATION -12--ONE PIECE PORT PLATES
R--FLANGE CONNECTION
REAR PORTS
P--STANDARD PRESSURE H--2OOO PSI ,,,--KEYED SHAFT
COMPENSATOR
T--SPLINED SHAFT
*R--REMOTE CONTROLLED
O--BUNA N SEALS D--THRU SHAFT
COMPENSATOR
SIDE PORTS ONLY
F--VITON SEALS

M--WATER BASE FLUIDS


‘“ CAUTION: When the remote control com- -11 PUMPS ONLY
pensator is used, a separate relief valve
limiting maximum system pressure to 2000 PSI
must be utilized.
INSTALL WITH LOCTITE #71 OIL SEAL RETAINER
OR EQUIVALENT ON O. D. OF SEAL

CASE DRAIN CLOSEST TO COMPENSATOR q -m?a B---@

TORQUE TO 800-850 IN. LB. 7’” @ii@Y


27

26

25

NOTE,REMOTE CONTROL 24

COMPENSATOR PORT
SIZE #6 ST. TH.———..__ 17 7
-P ~
Q.9---7 1,
“ORQUE TO 800-850 IN. LB.

L d 21
(5
20
OPTIONAL COVER
O 1800 IN. LB.

(Side Port)

@
NOTE: COAT WITH DOW CORN ING
“MOLYKOTE G PASTE”
OR EQUIVALENT ASSEMBLE WITH CHAMPFER ON
1. D. FACING SEAL.

?’

6 ‘d L-q
t)
B REF. NO’ S 45, 65, 66 NOT SHOWN

NOTE:REFERENCE NUMBERS 7,8,9, 10,35,47&48


ARE INTERCHANGE WITH REFERENCE NUMBERS
1,2,10,28,40 &41 ON LEFT HAND ROTATION
PUMPS.

Page 2
Ref. Part Ref. Part
No. No. Description Qty. No. No. Description Qty.
1 401069 Ball T 24 308413 Spring Stop 1
2 408601 Dowel Pin 1 25 308492 Spool Remote Compensator 1
3 400925 Pipe Plug, 1/16 N. P.T. F. 2 25 308420 Spool Std. Compensator 1
4 491043 Key 2/1 26 490969 Screw 7/16 - 14X 2 1/4 Sot. Hd. Cap 4
5 303513 Rotor Shaft, Single End Keyed 1 27 222607 Body Std. Compensator 1
5 303564 Rotor Shaft, Oouble End Keyed 1 Body Remote Compensator 1
[ 27 222638
[ 5 308563 Rotor Shaft, Single End Splined 1 28 723206 Compensator
6 400922 Pipe Plug, 1/8 N. P.T. F. 4
[ 723180 Compensator Remote I :
7 400451 Plug, Expanding Concave Type 1
29 491388 Plug, Cover Side Port Single End Shaft 1
8 222705 Bias Piston Cover 1
30 491049 Security Cap
9 408892 Screw, 7/16 - 14X 2 Sot. Hd. Cap 4
[ 30 308807 Cap (For Use WIO Thread Seal) I :
10 222690 R. H. Body L. H. Cover 1
31 401019 Lock Nut 1
[ 10 222692 L. H. Body R. H. Cover 1
32 308582 Set Screw - 1“ - 14X 2 1/2 Sot. Hd. 1
11 407464 Roll Pin, 3/16 Dia. X 3/8 1
33 490542 Name Plate, Right Hand Rotation 1
12 222685 Cover, Flange Corm. Rear Ports 1
12 222700 Cover, Str. Thd. Read Ports 1 [ 33 490543 Name Plate, Left Hand Rotation 1
34 401296 Screw 4
[ 12 222695 Cover, Flange Corm. Side Ports 1
13 400758 Bolts, 5/8 -11 X 2 1/4 Hex Hd. (Two 4/2 35 308508 Bias Piston 1
Used With Side & Rear Ports) 36 778278 Vanes (1 set of 11) I
37 222688 Body 1
[ 13 400765 Bolts, 4/8 - 11X 3 1/2 Hex Hd. 2
(Side Port Only) 38 308511 Pressure Ring 1
14 778041 Bearing 2 39 308510 Spacer Ring 1
15 401717 Roll Pin, 3/16 Dia. X 5/8 4 308507 Control Piston 1
16 490982 Seal Plate 1 41 490977 Spring 1
17 490978 Spring 1 42 491265 Thrust Block 1
18 490968 Screw #10 - 32X 1/2 1 43 491040 Steel Ball, 11/16 Dia. 1
19 308423 Inner Adjustment Screw 1 44 491046 Washer 1
20 490971 Set Screw 5/8 -18 1 45 400928 Pipe Plug, 1/4 N. P, T. F. (Not Shown) 4
Outer Adjustment Screw 47 308671 Bias Piston Sleeve 1
21 308415 1
Locknut 1 400930 Pipe Pluq 3/8 N. P. T.F. 1
22 308425
.% 490832 #5 SAE Plug 1
70 308672 Control Piston Sleeve 1

SEAL KITS
VITON SEAL KIT NO. 723442
THRU SHAFT SEAL KIT NO. 723444

Ref. Pfi$
No. Description Qty.

+44 491046 Washer 1


50 406636 O-ring, 3/32 x 3/8 x 9/16 3
51 406800 O-ring, 3/32 x 2-3/16 x 2-3/8 2
52 406703 O-ring, 1/8 x 4-1/8 x 4-3/8 2
53 491386 Back-up Ring 2
54 490934 Shaft Seal (2 Req. for Thru Shaft) 1/2
56 491385 Back-up Ring 2
57 491047 Back-up Ring 2
58 491251 O-ring, 3/32 x 2-1/8x 2-5/16 2
59 406518 O-ring, 3/32 x 9/16 x 3/4 1
(Shown on Volume Control)
61 407150 O-ring, 1/8 x 5-1/4 x 5-1/2 1
+62 490933 Thread Seal 1
63 406513 O-ring, 3/32 x 1-9/16 x 1-3/4 4
64 406269 O-ring, 1/16 x 3/8 x 1/2 1
65 406575 O-ring, 1/8 x 1-5/16 x 1-9/16 1
(Not Shown, Press .Port Flange)
66 406699 O-ring, 1/8 x 1-7/8x 2-1/8 1
(Not Shown, Suction Port Flange)
67 491354 Back-up Ring 1
(Shown on Volume Control)
68 491327 Back-up Ring 1
69 407093 O-ring, 3/32 x 15/16 x 1-1/8 1
71 406586 O-ring, .072 x .414 x .558 1
72 491786 Paste Capsule 1

NOTE: Flange Kit No. 950090contains one


l-1/~’ NPT inlet, one 1“ NPToutlet,
Repair Parts Kits For 2000 PSI Pumps* all bolts and O’rings.

I I +NOTE: Items No. 44 & 62 mav be missina on


some pumps since they have bee; re-

l
*Each kit contains the following parts: One ring, one rotor shaft, one
key, one set of vanes, four roll pins, two port plates, two bearings, one seal kit.
placed with a specially coated thrust
screw item No. 32. Both items 44 &62
are included in the seal and may be
used providing the directions on Page 2
item No. 44 are followed.

Page 3
VOLUME CONTROL

, Y 50

Ref. Part No. Description QtY.


No.
*5O 406636 O-Ring (Viton) 1
“59 406518 O-Ring (Viton) 1
*51 406800 O-Ring (Viton) 1
%4 406269 O-Ring fvifon ) 1
‘:<67 491354 Back-Up Ring 1
72 723319 Volume Cont. Assembly (Viton) 1
73 308412 Adj. Screw 1
74 401019 Lock Nut 1
75 222703 Body 1
76 408892 Screw, 7/16 - 14x 2 Sot. Hd. Cap 4
77 308506 Piston 1

*Also included in seal kit.

9 535 233 244


HPUS RSB 003/17 US (5.95)

ROBERT BOSCH FLUID POWER CORPORATION


P.O. BOX 2025
RACINE,
Phone

Printed
WISCONSIN
(414)554-71001

m USA
53401-2025 U.S.A.
Fax (414)554-71 17 @ BOSCH

Das könnte Ihnen auch gefallen