0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
115 Ansichten1 Seite
Transmitter is applicable to converting resistance of temperature sensor to standard current signal 4.20mA. Most of parameters such as: sensor type, input signal, measuring range may be adapted by user for specific requirements of his measuring system. The transmitter is programmed using PC with RS converter and Aplisens AT configuration software.
Transmitter is applicable to converting resistance of temperature sensor to standard current signal 4.20mA. Most of parameters such as: sensor type, input signal, measuring range may be adapted by user for specific requirements of his measuring system. The transmitter is programmed using PC with RS converter and Aplisens AT configuration software.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
Transmitter is applicable to converting resistance of temperature sensor to standard current signal 4.20mA. Most of parameters such as: sensor type, input signal, measuring range may be adapted by user for specific requirements of his measuring system. The transmitter is programmed using PC with RS converter and Aplisens AT configuration software.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
? Programmable sensor type PT100 i Ni100 ? Programmable measuring range. ? Resistant thermoresistance line compensation ( 3 wire line) ? Output signal 4…20mA ? head- mounting system.
Application and function
The temperature economical transmitter AT is applicable to converting resistance of temperature sensor to standard current signal 4…20mA. Most of parameters such as: sensor type, input signal, measuring range may be adapted by user for specific requirements of his measuring system. The transmitter is programmed using PC with RS converter and Aplisens Electrical diagrams AT configuration software. If you define type of sensor, measuring range in the order, then the transmitter is programmed with required parameters and their values are printed on serial number label. RS232 Transmitter for head mounting.
Konwerter Technical data
Tx Rx GND 15 24 7
Input signal Pt 100, Ni 100
Limit process 20 Ώ <R<380Ώ 3 I Min. measuring range 10 Ώ 2 + Rt Output signal 4 – 20 mA _ 1 Power supply 10…36V DC _ T +
Load resistance R o[kΏ]<(U z – 7V)/25mA
6 5 4 Alarm signal 23mA or 3,8mA Accuracy for ΔR>20Ώ ± 0,2% Ro Ucc Thermal error ± 0,1% / 10°C Ambient temperature -25…+80°C Error due to s upply voltage changes ±0,1%
Ordering procedure.
AT /___/__÷__°C/___
Sensor type:Pt100,Ni100 Alarm signal
Measuring range
Example: temperature transmitter AT, sensor type Pt100, measuring
range 0…100°C, alarm signal 23mA.
AT/Pt100/ 0…100°C/23mA
APLISENS Ltd. 03-192 Warsaw, 7 Morelowa Str. tel. (+48-22) 814-07-77