0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
11 Ansichten2 Seiten
14-Pin FLASH-Based 8-bit CMOS microcontroller. Features: low power Power-on Reset (POR) and Power-up Timer (PWRT) low power Brown-out Detect (BOD) Watchdog Timer (wdt) with its own on-chip RC oscillator for reliable operation.
14-Pin FLASH-Based 8-bit CMOS microcontroller. Features: low power Power-on Reset (POR) and Power-up Timer (PWRT) low power Brown-out Detect (BOD) Watchdog Timer (wdt) with its own on-chip RC oscillator for reliable operation.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als RTF, PDF, TXT herunterladen oder online auf Scribd lesen
14-Pin FLASH-Based 8-bit CMOS microcontroller. Features: low power Power-on Reset (POR) and Power-up Timer (PWRT) low power Brown-out Detect (BOD) Watchdog Timer (wdt) with its own on-chip RC oscillator for reliable operation.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als RTF, PDF, TXT herunterladen oder online auf Scribd lesen
• Low power Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up High Performance RISC CPU: Timer (OST) • Only 35 instructions to learn • Low power Brown-out Detect (BOD) • All single cycle instructions (200 ns), except for • Watchdog Timer (WDT) with its own on-chip RC program branches which are two-cycle oscillator for reliable operation • Operating speed: • Multiplexed MCLR pin - DC - 20 MHz oscillator/clock input • Interrupt-on-pin change - DC - 200 ns instruction cycle • Individual programmable weak pull-ups • Memory • Programmable code protection - 1024 x 14 words of FLASH Program Memory • Power saving SLEEP mode - 64 x 8 bytes of Data Memory (SRAM) • Selectable oscillator options - 128 x 8 bytes of EEPROM data memory - RC: External RC oscillator • Interrupt capability - INTOSC: Precision 4 MHz internal oscillator • 8-level hardware stack - EC: External Clock input • Direct, Indirect and Relative Addressing modes - XT: Standard crystal/resonator - HS: High speed crystal/resonator Peripheral Features: - LP: Power saving, low frequency crystal • 12 I/O pins with individual direction control • Fast Wake-up when running from INTOSC (8 • High current sink/source for direct LED drive clocks/2 s typical) • Analog comparator module with: • In-Circuit Serial ProgrammingTM (ICSPTM) via - One analog comparator two pins - Programmable on-chip comparator voltage • Four user programmable ID locations reference (CVREF) module - Programmable input multiplexing from device CMOS Technology: inputs • Low power, high speed CMOS FLASH technology - Comparator output is externally accessible • Fully static design • Analog-to-Digital Converter module (PIC16F676): • Wide operating voltage range - 10-bit resolution - PIC16F630/676 – 2.0V to 5.5V - Programmable 8-channel input • Industrial and Extended temperature range - Voltage reference input • Low power consumption • Timer0: 8-bit timer/counter with 8-bit - < 1.0 mA @ 5.5V, 4.0 MHz programmable prescaler - 400 A @ 2.0V, 4.0 MHz • Enhanced Timer1: - < 1.0 A typical standby current @ 2. - 16-bit timer/counter with prescaler - External Gate Input mode - Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC Oscillator mode selected 0