Sie sind auf Seite 1von 2

PHYSICAL PROPERTIES OF HC GAS

Stream GC-7 Tank Vapour


Component Properties
Molar (%)
Input Saturated MW 33.459 (-)
C1 30.70% 27.78% SG 1.155 (-)
C2 23.30% 21.08% ρ 0.080 (Lb/ft3)

C3 27.20% 24.61% (cP)


i-C4 4.30% 3.89% Cp 14.79 (Btu/LB mol Deg R)

n-C4 9.20% 8.32% k 1.1550 (-)


i-C5 1.80% 1.63% Fk 0.8250 (-)
n-C5 1.80% 1.63% Tc 154 O
F
C6 0.20% 0.18% Pc 887 (psia)
C7+ 0.00% 0.00% Tr 0.945 (-)
H2 0.00% 0.00% Pr 0.017 (-)
H2S 0.40% 0.36% Z 0.9930 (-)
O2 0.00% 0.00% Viscosity (Muo) 0.0095 (cP)
N2 0.50% 0.45% Viscosity (Mu) 0.0095 (cP)
CO2 0.60% 0.54% Net CV 1,662 (Btu/ft3)
H2O 0.00% 9.51% Acoustic Vel 998 (Ft/sec)
100.00% 100.00% Wobbe Index 1464 (-)
Temp 120.00 Deg F
Pressure 0.00 psig Sat Water % 10.5% (mol %)

Henry Hill - 12/08/2021 - 23:40:22 57172243.xls - All


1 Add Gas Analysis to celss B6 to B20

2 If gas analysis is on dry gas basis B19 should be zero although


any other number can put in this cell

3 To adjust for gas to be saturated with waterpress macro


"Saturate with H2O"

4
To Return to original data input press macro "Unsaturate"
5 Notes
MW calculated by summation of Mol Frac x mol weight of component
Cp calculated using Henry Hill method (see Gas-data-org.xls file)
Z calculated using Benedict-Webb-Rubin Equation
Net CV calculated using summation of Mol Fraction x CV of component
Saturated water calculated using Henry Hill method (see Water content.xls file)

Das könnte Ihnen auch gefallen