Beruflich Dokumente
Kultur Dokumente
Button Modes
* Button Click
Pattern Switching Mode
³ 1 2 3 8 0 6
Button Hold
Pattern Switching Mode
³ 1 2 3 8 1 6
-1-
IS3480 CONFIGURATION GUIDE ADDENDUM
³ 4 2 3 8 1 5 0
³ 4 2 3 8 1 0 0
³ 4 2 3 8 5 0
-2-
IS3480 CONFIGURATION GUIDE ADDENDUM
Primary Scan Patterns
* Primary Omni
³ 9 9 9 9 4 7
Primary Raster
³ 9 9 9 9 4 6
Primary Single-Line
³ 9 9 9 9 4 5
-3-
IS3480 CONFIGURATION GUIDE ADDENDUM
³ 9 9 9 9 4 4
Secondary Raster
³ 9 9 9 9 4 3
Secondary Single-Line*
³ 9 9 9 9 4 2
-4-
IS3480 CONFIGURATION GUIDE ADDENDUM
³ 9 9 8 0 4 8
The sweet spot mode is used to determine where the maximum read rate
point or “sweet spot” is located for a specific bar code type. Refer to the
IS3480 Installation and User’s Guide (MLPN 00-02026) for a complete
description of the Sweet Spot Mode.
CodeGate®
Enable CodeGate*
³ 1 1 8 7 1 3
Disable CodeGate
³ 1 1 8 7 0 3
* Default Factory Setting
-5-
IS3480 CONFIGURATION GUIDE ADDENDUM
Depth of Field
* Normal DOF
³ 1 1 8 7 0 1
Reduced DOF
³ 1 1 8 7 1 1
-6-
IS3480 CONFIGURATION GUIDE ADDENDUM
IR Activation
Enable IR Activation
³ 1 2 3 8 1 7
* Disable IR Activation
³ 1 2 3 8 0 7
-7-
Do not scan bar code below this line. Bar code is for Metrologic internal use only.
May 2004
Printed in the USA
00 - 020 90A
-8-