1 No. of Teeth on Pinion z1 27 2 No.of Teeth on Gear z2 27 3 Module m 3 4 Pressure Angle ? 20 5 Addendum ha 3 6 Dedendum hf 3.75 7 Tip Clearence c 0.75 8 Total Tooth Height h 6.75 9 Pitch Diameter d 81 10 Base Circle Diameter db 33.1 11 OutsidE Diameter da 87 By another formula 87 12 Root Diameter df 73.5 73.5 13 Center Distance a 81 14 Thickness of tooth per module at the root 15 Thickness of tooth at the Root Sum of logarithmic coefficients for determining the allowable tangential 16 tooth load nformation For Giving Gear Data on Drawing Type of Gear Rack Heat Treatment 55-60 HRC Class of Accuracy Grade-8 Module Normal mn 3 Axial mx Transverse mt No. of Teeths /Starts z 27 Basic Profile Pressure Angle ? 20 Addenddum ha 3 Bottom Clearance c 0.75 Addendum Modification Coeffiecient x Shifting of Base Profile xm Helix Angle ? Hand of the Helix Lead Angle ? Lead pz Pitch Circle Diameter d 81 Theoretical Tooth Depth a 6.75
Base Circle Diameter db 33.05464700688
Root Diameter Inspection Data (In Normal df Plane) Base Tangent Length Wk Chordal Tooth Thickness s Chordal Height ha Allowable Errors
Mating Gear/Worm Drawing No.
No. of Teeth /Starts z Center Distance a' Shaft Angle ?