Beruflich Dokumente
Kultur Dokumente
PAGE 6
PAGE 17
Top Discharge Equipment
PAGE 19
PAGE 26
Tank-Flo
Gaskets
Customer Service
PAGE 17
PAGE 6
PAGE 6
Rev: August/29/2008
CONTENTS
CONTENTS
Miscellaneous Equipment
• Blanking Caps
• BSP to NPT Adapters
• NPT to BSP Adapters
• Reducers
Sales and Support
• Repair manuals online at: www.girardequip.com
• All web inquiries: gsales@girardequip.com
Girard Locations
• Girard- Linden World Headquarters
• Girard- Houston
• Girard- Chicago
• Girard- Florida
• Girard- China
• Girard- UK
500mm
Manlid Features:
• Manlids are electropolished
• Neckrings are blasted and pickled
Options:
• 4- Point 300mm Inspection Manlid
• 6-point 500mm-4 bar
• Thermally insulated Manlids
STM0006
Lid Assembly
Seal - PTFE
A GE-Manlid Seal - PTFE
500mm STM0015
Low Profile Neck Ring
CW700371
Swing Bolt Kit
STM0022
A SECTION A-A
Hinge Pin
SCALE 1 : 4 Assembly
SRV’s
Rev: August/29/2008
84 99.88
3.31" 3.93"
79.38
3.13"
63.50
114.30 2.50
4.5"
5
Seal Kit
5
GR90010-RK O-ring and seal replacement kit
(65mm Vents Only) 5A
PRESSURE VACUUM
5B
5A
Vacuum Nut
GR05000
66
5B
Vacuum Spring
7
GR06000 Pressure
only pallet
GR07501
8
6A Pressure/
Vacuum Pallet
GR07000
9
11
9
7
10
Vacuum O-Ring
GR09000 10
8
Vacuum Poppet
11
GR10000
STANDARD FEATURES:
• Pressure / Vacuum or Pressure only
styles availabe
• Hardened coil springs for extra
durability
• ptfe seals and 0-Rings are all
interchangeable with other major
brands
• Slotted holes to fit flange sizes:
Din 65 PN10
Din 80 PN6
3” ANSI
• Electro chemically polished
for easy cleaning
• 1/4” tapped gauge port
115.87
4.56
104.64
4.12
4.77
.12
17
.67
114.30 114.30 17
4.50 4.50 .67 80
[80]
3.15
3.15
190.50 190.50
7.50
7.50
= SEAL KIT
GR-90011-RK O-RING REPLACEMENT KIT
(80mm SRV’s Only) 5
For Pressure/Vacuum Style Replace With:
PRESSURE VACUUM
5A
Vacuum Nut
GR05000
5B 6
Vacuum Spring
GR06000 Pressure
only pallet
GR07501
6A Pressure/Vacuum Pallet
GR07000
9
7
Vacuum O-Ring
GR09000 10
8
Vacuum Poppet
11
GR10000
STANDARD FEATURES:
• Pressure / Vacuum or Pressure Only
styles available
• Internally lined with PTFE
• Electrochemically polished for
easy cleaning
• Slotted holes to fit flange sizes:
Din 65 PN10
Din 80 PN6
3” ANSI
GE-IMF-TL 4.4 80mm flanged connection, Set at 4.4 bar Vacuum Range: Up to 24” hg
(63.82 psi), PTFE 0-Rings, 316L cast body Standard Vacuum Setting: .206 bar (6” hg)
and parts connection, all wetted parts are
PTFE Lined, electropolished to a bright Test Certificates are supplied with each vent.
finish. Tested and certified. Certification inspections can be witnessed by a third party
inspectorate upon request.
For pressure settings other than standard setting of 4.4 bar:
Substitute the number suffix to desired pressure setting. For Product Dimensions:
example, for 2.17 bar (31 psig) would be GE-IMF-TL 2.17
Weight: 10.50 lbs (4.76 kg)
MATERIALS OF CONSTRUCTION:
All metallic parts are 316 stainless steel
All O-Rings are made from PTFE
Liner- Solid White PTFE
115.87
115.87
4.564.56
104.64
104.64
4.124.12
114.30
114.30 17 17
4.504.50 .67 .67 [80] [80]
3.153.15
190.50
190.50
7.507.50
5A
Vacuum Nut
GR05000 6
5B Vacuum Spring
GR06000 6B
6A Pressure/Vacuum Pallet
GR07000
PTFE Pressure/
6C Vacuum Liner
8
GR13010
7 Vacuum O-Ring
GR09000
9
6D Vacuum Poppet
With PTFE Cover
GR10010
Bolting Kit
• Part number GRM-16-4
• 4 pcs. of M 16 bolt, washer, nut
Flame Screens
• Wrap around Flame Screen, 316 Stainless Steel mesh
• Extra Capacity Style, designed to maintain flow rates
for SRV’s using Flame Screens
Part #: Description:
GE- IM SCREEN Wrap Around
GE-IM Screen-EC Extra Capacity Style
Pressure Gauges
• Part Number GE-202019A
• All stainless steel construction, glycerin filled to
withstand vibrations of the tank container while in
transit, 1/4” male NPT connection, 0-7 bar (0-100 psi)
gradients
FEATURES:
• 1 1/2” BSP Male Inlet
• 316L Stainless Steel construction
with PTFE seals
• Full bore sphere to limit entrapment
areas enhancing cleanliness and
reducing potential seal damage
• Handle seal packings are adjustable
without removal of handle from valve
or valve from tank
• Raised boss for the removal / replacement
of pressure gauge
• Integrally cast Tir locking tags for
added security
• Heavy duty flange to avoid distortion
on fitting/removal
• Gauge guard provision
(0-7 bar)
GE-STF7015 Weld-In Tank Pad
SPECIFICATIONS:
Design Pressure: 300 psig (20.7 bar)
Product Dimensions:
10.92
.43
Weight: 4.55 lbs (2.06 kg)
3
4
7
6
13 14
8
10
11
16
12
15
9
228.69
9.00
SPECIFICATIONS:
88.98
3.50
Design Pressure: 6.9 bar (100 psi)
Test Pressure: 10.3 bar (150 psi)
Design Temperature: 392° F (200° C)
Weight: 10.03 lbs (7.2 kg)
78.77
3.10
52.30 Ordering Information
2.06
88.98
Butterfly Valve.
3.50
Dimensions described
below.
6 Holes ø14.0(0.55”)
THRO SPACED AS
78.77
SHOWN52.30
ON A 168.28
3.10
(6.625”)
2.06 PCD
A A
A A
GE-M10-6
GE-TDBV-RK Repair Kit 1 Top Discharge Bolting Kit- 6 of each piece
14
11
15
1 6
21 25
20
22
26
5
23
12
13
4
16 10 19
17 9
3
2
18 3 24
17
16
7
18
3” Spigot Flange
3” Blanking Cap
Rev: August/29/2008
Features:
• Designed to be mounted between the
two flange faces of a Bottom Outlet
Valve and a Spigot Flange
• All parts are 316L Stainless Steel
with PTFE seals
• Left hand operation Butterfly Valve
with TIR and a security lock facility
SPECIFICATIONS:
Weight: 10 lbs. (4.53 kg)
228.64
Working Pressure: 6.8 bar (100 psi)
9.00
88.98
3.50 Ordering Information:
Part No. Description
GE-300CSBV 3” Clamped style Butterfly
Valve as described above.
32
78.78 1.26 GQ-70030 Flange gaskets (2 required)
3.10
when fitted between Foot-
valve and 3” Spigot Flange.
Associated
Parts:
GQ-70030
Butterfly Valve Flange Gaskets
B B
GE-300BK-CFV
SS Bolt, Nut Washer, Nylon Spacers
18
1
17
22
4
3 15 20
21
19
5
7
6
16 23
9 11
10 12
14 13
8 13 24
12
10
9
25
8
26
Ordering Information
Part No. Description
GE-300BOV-45 3” 45° megoFLO Footvalve with
Tef-O-Sil (PTFE) Seals
4-bolt outlet flange
8-bolt inlet flange
GE-300BOV-30 3” 30° megaFLO Footvalve with
Tef-O-Sil (PTFE) Seals
PERFORMANCE SPECIFICATIONS: 4-bolt outlet flange
8-bolt inlet flange
Design Pressure: 6.6 bar (100 psi)
Temperature Range from:: -4° to 392° F (-20° to 200° C)
Product Dimensions:
Weight: 15.9 lbs (71.21 kg)
]
[200
7.87
95
3.74
[200]
7.87
95
D 3.74
D
D
77.41
3.05
155
6.10 1
77.4
10.45
3.05
.41
15.50
155
D .61
6.10
0
15.5
.61
200
7.87
95
3.74
D
10.50
.41
77.50
3.05
15.50 155
.61 6.10
20
19
1
18
15 14
16
GE-032
PTFE- Flanged Envelope 17
Gasket 2
4
7 6
11 9 8
12
8 3
13
5
10
GE-STF700201
Bottom Outlet Valve Weld Pad
Features:
• All parts are 316L Stainless Steel with
PTFE seals
• Butterfly Valve has left hand operation
with TIR and a security lock facility
• Eccentric Spigot Flange to limit trapped
liquids and allow for optimal flow rates
• 3” BSP Cap has straight threads
that reduce galling when frequently
removing and replacing Blanking Cap
• All gaskets, seals and 0-Rings are
standard sizes and made from PTFE
materials; interchangeable with other
brands
95
3.74
GE-032
PTFE Envelope Gasket
GE-STF700201
9
Bottom Outlet Valve Weld Pad
8
GQ 70030
Butterfly Valve Flange Gaskets
7
4
6
5
GE-Chain- Stainless Steel
(order by the foot or meter)
4
GE-M12X52MM-8
M12x52M Stud, Washer Set - Steel
GQ-70010
3” Spigot Flange
GQ-70015
GE-300BK-CFV 3” Spigot Flange (NPT)
Items 2, 5, 8, 9 Bolting Kit
G-LINK USA
USA TARTREC
TARTREC
Thermally Activated Remote Trip Release Emergency Control
CONFIGURATION
The shut-off cable attaches to the
The shut-off cable attaches to the The heat fuse and frame anchor is tank container frame so there is no
handle of the foot valve. installed inline with the shut-off cable. slack when the valve is open.
OPERATION
Heat from accidental combustion As the fuse releases, it pulls the The shut-off cable pulls the foot
trips the fuse by melting the solder shut-off cable. valve handle, closing the valve and
holding the fuse plunger in place. denying fuel for combustion.
G
C
D E B
A
11⁄2” BSP Female Thread x 3⁄4” N.P.T. Female Threaded T-316 S/S Adapter (Not Shown) GE-1.5 BSPX 3⁄4 NPT
B 11⁄2” BSP Female Thread x 11⁄2” N.P.T. Male Threaded T-316 S/S Adapter GE-1.5 BSPX 1.5 NPT
D 2” BSP Female Thread x 3⁄4” N.P.T. Female Threaded T-316 S/S Adapter GE-2 BSPX 3⁄4 NPT
F 3” BSP Female Thread x 2” N.P.T. Male Threaded T-316 S/S Adapter GE-3X 2-BSPX NPT
G 3” BSP Female Thread x 3” N.P.T. Male Threaded T-316 S/S Adapter GE-3X 3-BSPX NPT
Caps and Adapters Seal on Ring Type Gaskets. (Gaskets available in bundles)
www.girardequip.com • T:(908)
30 T:(908) 862-6300
862-6300 •• F:(908)
F:(908) 862-8178
862-8178 • gsales@girardequip.com www.girardequip.com
• gsales@girardequip.com • 30
Rev: August/29/2008
USA Directory
Beijing
501 N Riverside Dr., Suite 110
Room 607
Gurnee, IL 60031
3# Building
847-599-8566
No.9 Zifang Road
Chaoyang District, Beijing
100021
531 Highway 146 North Tel.: 86 10 87623875
La Porte, TX 77571
281-842-7500
ISO TANK
CONTAINER
EQUIPMENT
Products:
• Safety Relief Vents
• Airline Ball Valves
• Manlids & Accessories
• Bottom Outlet Valves
• Caps Flanges & Accessories
800-526-4330
p: 908-862-6300
f: 908-862-8178
www.girardequip.com
gsales@girardequip.com
p: 281-842-7500
f: 281-842-7501
Rev: August/29/2008
New Photo E
Rev: August/29/2008
Rev: August/29/2008
Rev: August/29/2008