Beruflich Dokumente
Kultur Dokumente
CONCRETE JOINT
WATERSTOP
Slab
Wall
Penetration
Waterstop-RX 101
Waterstop-RX 101 is an expanding strip Waterstop
designed to stop water infiltration through cast-in-place
concrete construction joints. It expands upon contact with
water to form a positive seal against concrete. The key
Waterstop-RX's effectiveness is high sodium bentonite
content which provides superior expansion to seal and fill
voids and cracks in the concrete. Waterstop-RX is
designed to replaces passive PVC/ rubber dumbbell
waterstops, thereby eliminating the requirement of special
pieces, split-forming and seam welding. Specified
worldwide, Waterstop-RX has a 25 year proven track
record as a reliable and cost-effective solution for
stopping water ingress through concrete joints.
WATERSTOP-RX
ADVANTAGES
• Active, Swelling aterstop
W
• Fast, Easy Installation
• Seals Around Penetrations
• Ideal when pouring
against existing concrete
RX 101 - 3/4" x 1" • Expands to seal off leaks
Designed for vertical and horizontal • High Hydrostatic Resistance
concrete 8" thick or greater.
EXPANDING CONCRETE JOINT WATERSTOP
APPLICATIONS
Applications include both vertical and horizontal non-
moving concrete joints, new to exisiting concrete
WATERSTOP-RX
construction joints, irregular surfaces, and through
wall penetrations, such as plumbing and utility pipes.
WATERSTOP-RX
Additionall it can seal around concrete pilings and is an effective, simple and
steel I-beams passing through concrete. Waterstop-
RX works in both continuous and intermittent
economical material for
hydrostatic conditions. cast-in-place concrete joints.
Waterstop-RX 101 is certified by NSF International
for use in potable water tanks 3,785 L (1,000 gallons)
or greater.
WATERSTOP–RX
CONCRETE
WALL
WATERSTOP–RX IN
SLAB/WALL JOINT
CONCRETE
SLAB
When hydrated,
Waterstop-RX can
WATERSTOP–RX expand up to three times
its size in an unconfined
area but is limited to
FOOTING controlled expansion
MINIMUM 75mm (3") TO in a concrete joint
EXTERIOR WALL SURFACE
where it is confined.
PLACE WATERSTOP–RX
INSIDE OF OUTER MOST
DOWELS
ACCESSORY PRODUCTS
Waterstop -RX is not a self-adhering product. WB-Adhesive or SB-Primer is required to secure Waterstop -RX to c
metal, or PVC (pipe) surfaces. Mechanical fasteners should not be used to secure Waterstop -RX alone but may
conjunction with adhesive.
WB-ADHESIVE SB-PRIMER
WB-Adhesive is a water-based, latex adhesive specially
SB-Primer is a solvent-based modified rubber adhesive
formulated to secure Waterstop -RX to concrete, metal,
formulated to adhere Waterstop -RX in cold weather
and PVC (pipe) surfaces. Do not allow WB-Adhesive
conditions
to -7° C to 38° C (-20° F to 100° F).
freeze. Store in a warm, dry location prior to use. CAUTION: SB-Primer is an extremely flammable solution.