Sie sind auf Seite 1von 7

1 boot from CD, you will see this screen, press enter

2 You must select the installer mode, press i

3 here you can change some settings, but you can leave without change, just select accept these settings

4 Now, if you are new at pfSense ( just like me ) you can select Quick / Easy Install

5 Now you will see this warning screen, select OK and your disk will be erased ( i asume you have an dedicated / empty HD for pfsense )

6 The install process will start

7 now you must select the kernel

8 The install is done, now you must reboot

9 Once you have rebooted, you must configure your VLANs & network adapters

Now once you have finished the interface configuration, you must be able to login to the web interface ( through the LAN interface ), using the IP that you have asigned to the LAN

Das könnte Ihnen auch gefallen