Beruflich Dokumente
Kultur Dokumente
BS 7188 ..............................................................28
BS 3810 ..............................................................30
BS 8409 ........................................................12, 32
BS 4361 ........................................................31, 32
BS 4620 ..............................................................30
BS 4656 ..............................................................33
BS EN 1176 ........................................................32
BS 4894 ..............................................................26
BS EN 1230 ........................................................12
BS 5046 ..............................................................26
BS 5276 ........................................................26, 30
BS 5346 ..............................................................27
BS 5656 ..............................................................27
BS 5864 ..............................................................27
BS 5884 ..............................................................27
BS 6172 ..............................................................27
BS 6362 ..............................................................33
BS 6404 ..............................................................27
BS 6590 ..............................................................33
BS 6785 ..............................................................28
BS 6955 ........................................................18, 32
Electrotechnical
BS 5950 ........................................................24, 27
BS 822 ................................................................24
BS 5977 ..............................................................27
BS 842 ................................................................24
BS 6037 ..............................................................27
BS 4177 ..............................................................26
BS 6999 ..............................................................28
BS 4999 ..............................................................24
BS 8000 ..............................................................28
BS 5266 ..............................................................26
BS 8008 ..............................................................28
BS 5285 ..............................................................27
BS 8102 ..............................................................12
BS 5685 ..............................................................30
BS 8103 ..............................................................12
BS 6133 ..............................................................27
BS 8204 ..............................................................29
BS 6259 ..............................................................27
BS 8427 ..............................................................29
BS 6290 ..............................................................32
BS EN 934 ..........................................................12
BS 7647 ..............................................................28
BS 7697 ..............................................................28
BS EN 14023 ......................................................49
BS 7856 ..............................................................28
BS 9000 ..............................................................31
BS EN 60059 ......................................................23
BS EN 60384 ......................................................22
BS EN 60393 ................................................22, 32
BS EN 60598 ......................................................23
BS EN 60896 ................................................22, 32
PD 6682 .............................................................19
BS EN 60950 ......................................................22
PD 6688 .............................................................19
NA to BS EN 1993 ...............................................12
Engineering
BS 7036 ..............................................................28
BS 7371 ..............................................................28
BS 7545 ........................................................17, 32
BS 7668 ..............................................................28
BS 7801 ..............................................................28
BS 7805 ..............................................................28
BS 7854 ........................................................17, 32
BS 7855 ..............................................................28
BS 7881 ..............................................................31
BS 7935 ..............................................................28
DD CEN/TS 14940 ..............................................19
BS EN 609 ..........................................................22
BS EN 778 ..........................................................12
BS EN 1218 ........................................................23
BS EN 1807 ........................................................23
BS EN 1870 ........................................................23
BS EN 1889 ........................................................23
BS EN 2240 ........................................................14
BS EN ISO 2740 ..................................................14
BS EN 2955 ........................................................22
BS EN ISO 3059 ..................................................34
BS EN 3464 ........................................................14
BS EN 3660 ........................................................14
BS EN 3730 ........................................................14
BS EN ISO 3907 ............................................14, 32
BS EN 3987 ........................................................14
BS EN 4113 ........................................................14
BS EN 4114 ........................................................14
BS EN 4234 ........................................................14
BS EN ISO 7500 ..................................................35
BS EN ISO 8044 ..................................................35
BS EN ISO 9934 ..................................................35
BS EN 10269 ......................................................22
BS 3459 ..............................................................26
BS 131 ................................................................24
BS EN 10349 ......................................................14
BS 3509 ..............................................................26
BS 275 ................................................................30
BS 4358 ..............................................................26
BS 460 ................................................................22
BS 4484 ..............................................................26
BS 641 ................................................................30
BS EN 12779 ......................................................23
BS 4585 ........................................................12, 32
BS 1109 ..............................................................30
BS 4672 ..............................................................30
BS 1127 ..............................................................24
BS 4875 ..............................................................26
BS 1407 ..............................................................25
BS 5459 ..............................................................27
BS 1449 ..............................................................25
BS 6049 ..............................................................33
BS 1660 ..............................................................25
BS 6325 ..............................................................33
BS 1974 ..............................................................30
BS 6381 ..............................................................27
BS 2772 ..............................................................26
BS 6986 ..............................................................33
BS 3015 ........................................................17, 31
BS 7172 ..............................................................28
BS 3575 ..............................................................30
BS 2B 30 .............................................................20
BS TA 47 .............................................................21
BS 3B 30 .............................................................20
BS 2TA 47 ...........................................................21
BS 3B 31 .............................................................20
BS 2TA 48 ...........................................................21
BS 2B 31 .............................................................20
BS TA 48 .............................................................21
BS EN 15503 ......................................................15
BS 3B 32 .............................................................20
BS 2TA 49 ...........................................................21
BS EN 15714 ......................................................16
BS 2B 32 .............................................................20
BS TA 49 .............................................................21
BS 3B 33 .............................................................20
BS 2TA 50 ...........................................................21
BS 2B 33 .............................................................20
BS TA 50 .............................................................21
BS L 170 .............................................................31
BS 2TA 51 ...........................................................21
BS EN 23907 ................................................14, 32
BS 5X 17 ............................................................31
BS TA 51 .............................................................21
BS HC 401 ..........................................................31
BS TA 52 .............................................................21
BS HC 402 ..........................................................31
BS 2TA 52 ...........................................................21
BS TA 56 .............................................................22
BS 2TA 56 ...........................................................22
BS TA 57 .............................................................22
BS 2TA 57 ...........................................................22
BS HR 203 ..........................................................20
BS 2TA 58 ...........................................................22
BS TA 58 .............................................................22
BS 2TA 59 ...........................................................22
BS HR 204 ..........................................................20
BS TA 59 .............................................................22
BS HR 205 ..........................................................20
BS AU 50 ............................................................38
BS HR 206 ..........................................................20
BS AU 170 ..........................................................30
BS AU 206 ..........................................................38
BS HR 207 ..........................................................20
BS AU 233 ..........................................................38
BS HR 208 ..........................................................20
BS SP 57 and 58 .................................................31
BS 2TA 1 .............................................................20
BS 2738 ..............................................................26
BS 3TA 1 .............................................................20
BS 5682 ..............................................................27
BS 2TA 2 .............................................................21
BS 3TA 2 .............................................................21
BS 6165 ..............................................................27
BS 2TA 6 .............................................................21
BS 6643 ..............................................................27
BS 3TA 6 .............................................................21
BS 6734 ..............................................................28
BS 2TA 7 .............................................................21
BS 6788 ..............................................................28
BS 3TA 7 .............................................................21
BS 7208 ..............................................................30
BS 2TA 10 ...........................................................21
BS 7899 ..............................................................28
BS 3TA 10 ...........................................................21
BS 7971 ..............................................................28
BS 2TA 11 ...........................................................21
BS 8428 ..............................................................29
BS 3TA 11 ...........................................................21
BS 8468 ..............................................................12
BS 2TA 12 ...........................................................21
DD 180 ...............................................................29
BS 3TA 12 ...........................................................21
BS 3TA 13 ...........................................................21
PD 6433 .............................................................29
BS 2TA 13 ...........................................................21
PD 6439 .............................................................29
BS 2TA 21 ...........................................................21
BS EN 455 ..........................................................12
PD 6510 .............................................................31
BS 3TA 21 ...........................................................21
BS EN 794 ..........................................................22
PD 8010 .............................................................30
BS 2TA 28 ...........................................................21
BS EN 1639 ........................................................14
BS 3TA 28 ...........................................................21
BS EN 1640 ........................................................14
BS 2B 23 .............................................................20
BS TA 38 .............................................................21
BS EN 1641 ........................................................14
BS B 23 ...............................................................20
BS 2TA 38 ...........................................................21
BS EN 1642 ........................................................14
BS 2B 24 .............................................................20
BS 2TA 39 ...........................................................21
BS B 24 ...............................................................20
BS TA 39 .............................................................21
BS 3B 25 .............................................................20
BS 2TA 40 ...........................................................21
BS 2B 25 .............................................................20
BS TA 40 .............................................................21
BS 2B 26 .............................................................20
BS 2TA 41 ...........................................................21
BS 3B 26 .............................................................20
BS TA 41 .............................................................21
BS 3B 27 .............................................................20
BS TA 42 .............................................................21
BS 2B 27 .............................................................20
BS 2TA 42 ...........................................................21
BS 3B 28 .............................................................20
BS 2TA 45 ...........................................................21
BS 2B 28 .............................................................20
BS TA 45 .............................................................21
BS 3B 29 .............................................................20
BS 2TA 46 ...........................................................21
BS EN 13501 ......................................................23
BS 2B 29 .............................................................20
BS TA 46 .............................................................21
PD 0028 .............................................................29
PD 6505 .............................................................31
PD 6631 .............................................................29
PD 6777 .............................................................29
BS EN 14662 ......................................................29
BS EN 14884 ......................................................36
BS EN 15269 ......................................................15
BS EN ISO 15535 ................................................36
BS EN 15657 ......................................................16
BS EN ISO 15841 ................................................36
BS EN ISO 16000 ................................................29
BS EN ISO 16266 ................................................36
BS EN ISO 20776 ................................................37
BS EN ISO 21427 ................................................37
Management systems
BS 350 ................................................................24
BS 4899 ..............................................................31
PD 6461 .............................................................29
PD 7500 .............................................................29
PD 7501 .............................................................29
PD 7502 .............................................................30
PD 7503 .............................................................30
BS EN 29052 ......................................................37
BS 797 ................................................................25
BS EN 13060 ......................................................23
BS 1428 ..............................................................25
BS EN 13523 ......................................................15
BS 2543 ..............................................................26
BS 2782 ........................................................15, 26
BS EN 14180 ......................................................23
BS 2975 ..............................................................26
BS EN 14232 ................................................15, 32
BS 3129 ..............................................................30
BS 3483 ........................................................12, 31
BS 3680 ..............................................................33
BS EN 15376 ......................................................23
BS EN ISO 15403 ................................................36
BS EN ISO 15528 ................................................36
BS EN 15749 ................................................16, 32
BS EN 15779 ......................................................16
BS EN ISO 16276 ................................................36
BS EN ISO 16773 ..........................................16, 36
BS 6806 ..............................................................28
BS 7030 ..............................................................33
BS 7034 ........................................................33, 34
BS EN 20287 ................................................12, 32
BS 7079 ..............................................................35
BS 7114 ..............................................................30
BS 2979 ..............................................................26
BS 7332 ..............................................................30
BS EN 29117 ................................................14, 32
BS 4280 ..............................................................26
BS 7463 ..............................................................34
BS 4811 ..............................................................26
BS 7709 ..............................................................34
BS 4812 ..............................................................26
BS 7956 ..............................................................28
BS 5605 ..............................................................27
BS 5252F ............................................................29
BS 6371 ..............................................................27
DD 234 ...............................................................34
BS 7014 ..............................................................28
BS 7581 ..............................................................28
BS EN 937 ..........................................................12
BS EN 973 ..........................................................12
BS EN 1405 ........................................................12
BS EN 1406 ........................................................12
BS EN 1422 ........................................................23
PD 0006 .............................................................29
PD 0016 .............................................................29
PD 0017 .............................................................29
PD 0018 .............................................................29
PD 0023 .............................................................29
Information systems
BS 4894 ..............................................................26
BS 7668 ..............................................................28
BS 4899 ..............................................................31
BS 7697 ..............................................................28
BS 4999 ..............................................................24
BS 7709 ..............................................................34
BS 5046 ..............................................................26
BS 7801 ..............................................................28
BS 5248 ..............................................................26
BS 7805 ..............................................................28
BS 5252 ..............................................................26
BS 7854 ........................................................17, 32
BS 5266 ..............................................................26
BS 7855 ..............................................................28
BS 5276 ........................................................26, 30
BS 7856 ..............................................................28
BS 5285 ..............................................................27
BS 7881 ..............................................................31
BS 5346 ..............................................................27
BS 7899 ..............................................................28
BS 5422 ..............................................................22
BS 7935 ..............................................................28
BS 5459 ..............................................................27
BS 7956 ..............................................................28
BS 5507 ..............................................................27
BS 7971 ..............................................................28
BS 5605 ..............................................................27
BS 8000 ..............................................................28
BS 5642 ..............................................................27
BS 8008 ..............................................................28
BS 5656 ..............................................................27
BS 8102 ..............................................................12
BS 5682 ..............................................................27
BS 8103 ..............................................................12
BS 5685 ..............................................................30
BS 8204 ..............................................................29
BS 5854 ..............................................................27
BS 8409 ........................................................12, 32
BS 5864 ..............................................................27
BS 8427 ..............................................................29
BS 5867 ..............................................................27
BS 8428 ..............................................................29
BS 5884 ..............................................................27
BS 8468 ..............................................................12
BS 5898 ..............................................................33
BS 9000 ..............................................................31
BS 5950 ........................................................24, 27
BS 5252F ............................................................29
BS 5977 ..............................................................27
DD 180 ...............................................................29
BS 6037 ..............................................................27
DD 234 ...............................................................34
BS 6049 ..............................................................33
BS 6127 ........................................................17, 32
BS 6133 ..............................................................27
BS 6165 ..............................................................27
BS 6172 ..............................................................27
BS 6259 ..............................................................27
BS 2738 ..............................................................26
BS 6290 ..............................................................32
BS EN 455 ..........................................................12
BS 2772 ..............................................................26
BS 6325 ..............................................................33
BS EN 609 ..........................................................22
BS 2782 ........................................................15, 26
BS 6362 ..............................................................33
BS EN 778 ..........................................................12
BS 2975 ..............................................................26
BS 6371 ..............................................................27
BS 2979 ..............................................................26
BS 6381 ..............................................................27
BS EN 794 ..........................................................22
BS 3015 ........................................................17, 31
BS 6404 ..............................................................27
BS 3129 ..............................................................30
BS 6590 ..............................................................33
BS 3459 ..............................................................26
BS 6643 ..............................................................27
BS EN 934 ..........................................................12
BS 3483 ........................................................12, 31
BS 6734 ..............................................................28
BS EN 937 ..........................................................12
BS 3509 ..............................................................26
BS 6785 ..............................................................28
BS EN 973 ..........................................................12
BS 3575 ..............................................................30
BS 6788 ..............................................................28
BS 3680 ..............................................................33
BS 6806 ..............................................................28
BS EN 1176 ........................................................32
BS 3810 ..............................................................30
BS 6955 ........................................................18, 32
BS EN 1218 ........................................................23
BS 6986 ..............................................................33
BS EN 1230 ........................................................12
BS 4177 ..............................................................26
BS 6999 ..............................................................28
BS 4280 ..............................................................26
BS 7014 ..............................................................28
BS EN 1405 ........................................................12
BS 4315 ..............................................................26
BS 7030 ..............................................................33
BS EN 1406 ........................................................12
BS 4358 ..............................................................26
BS 7034 ........................................................33, 34
BS EN 1422 ........................................................23
BS 4361 ........................................................31, 32
BS 7036 ..............................................................28
BS 4484 ..............................................................26
BS 7079 ..............................................................35
BS EN 1639 ........................................................14
BS 4499 ..............................................................33
BS 7114 ..............................................................30
BS EN 1640 ........................................................14
BS 4585 ........................................................12, 32
BS 7172 ..............................................................28
BS EN 1641 ........................................................14
BS 4620 ..............................................................30
BS 7188 ..............................................................28
BS EN 1642 ........................................................14
BS 4656 ..............................................................33
BS 7208 ..............................................................30
BS EN 1807 ........................................................23
BS 4672 ..............................................................30
BS 7332 ..............................................................30
BS EN 1870 ........................................................23
BS 4747 ..............................................................33
BS 7371 ..............................................................28
BS EN 1889 ........................................................23
BS 4787 ..............................................................26
BS 7463 ..............................................................34
BS 4811 ..............................................................26
BS 7545 ........................................................17, 32
BS EN 2240 ........................................................14
BS 4812 ..............................................................26
BS 7581 ..............................................................28
BS 4875 ..............................................................26
BS 7647 ..............................................................28
BS 41 ..................................................................24
BS 65 ..................................................................24
BS 131 ................................................................24
BS 275 ................................................................30
BS 308 ................................................................34
BS 350 ................................................................24
BS 460 ................................................................22
BS 493 ................................................................24
BS 567 ................................................................24
BS 598 ................................................................24
BS 641 ................................................................30
BS 797 ................................................................25
BS 822 ................................................................24
BS 835 ................................................................24
BS 842 ................................................................24
BS 870 ................................................................22
BS 1054 ..............................................................24
BS 1109 ..............................................................30
BS 1127 ..............................................................24
BS 1347 ..............................................................24
BS 1377 ........................................................24, 25
BS 1407 ..............................................................25
BS 1428 ..............................................................25
BS 1449 ..............................................................25
BS 1660 ..............................................................25
BS 1974 ..............................................................30
BS 2000 .................................................16, 25, 26
BS 2457 ..............................................................26
BS 2459 ..............................................................26
BS 2543 ..............................................................26
BS EN 60598 ......................................................23
BS EN 60896 ................................................22, 32
BS EN 60950 ......................................................22
BS EN 2955 ........................................................22
BS EN 14023 ......................................................49
BS EN 14180 ......................................................23
BS EN 3464 ........................................................14
BS EN 14232 ................................................15, 32
BS EN 3660 ........................................................14
BS EN 3730 ........................................................14
BS EN 3987 ........................................................14
BS EN 4113 ........................................................14
BS EN 14662 ......................................................29
BS EN 4114 ........................................................14
BS EN 4234 ........................................................14
BS EN 14884 ......................................................36
BS EN 15269 ......................................................15
BS EN 15376 ......................................................23
BS EN 15503 ......................................................15
BS EN 15657 ......................................................16
BS EN 15714 ......................................................16
BS EN 15749 ................................................16, 32
BS EN 15779 ......................................................16
BS EN 10269 ......................................................22
BS EN 10349 ......................................................14
BS EN 20287 ................................................12, 32
BS EN 12779 ......................................................23
BS EN 23907 ................................................14, 32
BS EN 13060 ......................................................23
BS EN 13501 ......................................................23
BS EN 29052 ......................................................37
BS EN 13523 ......................................................15
BS EN 29117 ................................................14, 32
BS EN 60059 ......................................................23
BS EN 60384 ......................................................22
BS EN 60393 ................................................22, 32
10
BS B 24 ...............................................................20
BS TA 39 .............................................................21
BS 3B 25 .............................................................20
BS TA 40 .............................................................21
BS 2B 25 .............................................................20
BS 2TA 40 ...........................................................21
BS 3B 26 .............................................................20
BS TA 41 .............................................................21
BS 2B 26 .............................................................20
BS 2TA 41 ...........................................................21
BS 3B 27 .............................................................20
BS TA 42 .............................................................21
BS 2B 27 .............................................................20
BS 2TA 42 ...........................................................21
BS 3B 28 .............................................................20
BS 2TA 45 ...........................................................21
BS 2B 28 .............................................................20
BS TA 45 .............................................................21
BS 3B 29 .............................................................20
BS 2TA 46 ...........................................................21
BS 2B 29 .............................................................20
BS TA 46 .............................................................21
BS 3B 30 .............................................................20
BS 2TA 47 ...........................................................21
BS 2B 30 .............................................................20
BS TA 47 .............................................................21
BS 3B 31 .............................................................20
BS 2TA 48 ...........................................................21
BS 2B 31 .............................................................20
BS TA 48 .............................................................21
BS 2B 32 .............................................................20
BS TA 49 .............................................................21
BS 3B 32 .............................................................20
BS 2TA 49 ...........................................................21
BS 3B 33 .............................................................20
BS TA 50 .............................................................21
BS 2B 33 .............................................................20
BS 2TA 50 ...........................................................21
BS L 170 .............................................................31
BS 2TA 51 ...........................................................21
BS 5X 17 ............................................................31
BS TA 51 .............................................................21
BS HC 401 ..........................................................31
BS 2TA 52 ...........................................................21
BS HC 402 ..........................................................31
BS TA 52 .............................................................21
BS 2TA 56 ...........................................................22
BS TA 56 .............................................................22
BS 2TA 57 ...........................................................22
BS TA 57 .............................................................22
BS TA 58 .............................................................22
BS HR 203 ..........................................................20
BS 2TA 58 ...........................................................22
BS 2TA 59 ...........................................................22
BS HR 204 ..........................................................20
BS TA 59 .............................................................22
BS HR 205 ..........................................................20
BS HR 206 ..........................................................20
BS AU 50 ............................................................38
PD 0006 .............................................................29
BS AU 170 ..........................................................30
PD 0016 .............................................................29
BS AU 206 ..........................................................38
PD 0017 .............................................................29
BS HR 207 ..........................................................20
BS AU 233 ..........................................................38
PD 0018 .............................................................29
BS HR 208 ..........................................................20
PAS 66 ................................................................22
PD 0023 .............................................................29
NA to BS EN 1993 ...............................................12
PD 0028 .............................................................29
BS SP 57 and 58 .................................................31
PD 6433 .............................................................29
BS 2TA 1 .............................................................20
PD 6439 .............................................................29
BS 3TA 1 .............................................................20
PD 6461 .............................................................29
BS 2TA 2 .............................................................21
PD 6503 .............................................................29
BS 3TA 2 .............................................................21
PD 6505 .............................................................31
BS 2TA 6 .............................................................21
PD 6510 .............................................................31
BS 3TA 6 .............................................................21
PD 6631 .............................................................29
BS 3TA 7 .............................................................21
PD 6682 .............................................................19
BS 2TA 7 .............................................................21
PD 6688 .............................................................19
BS 3TA 10 ...........................................................21
PD 6777 .............................................................29
BS 2TA 10 ...........................................................21
PD 7500 .............................................................29
BS 3TA 11 ...........................................................21
PD 7501 .............................................................29
BS 2TA 11 ...........................................................21
PD 7502 .............................................................30
BS 3TA 12 ...........................................................21
PD 7503 .............................................................30
BS 2TA 12 ...........................................................21
PD 8010 .............................................................30
BS 3TA 13 ...........................................................21
BS 2TA 13 ...........................................................21
BS 3TA 21 ...........................................................21
BS 2TA 21 ...........................................................21
BS 3TA 28 ...........................................................21
BS 2TA 28 ...........................................................21
BS B 23 ...............................................................20
BS 2TA 38 ...........................................................21
BS 2B 23 .............................................................20
BS TA 38 .............................................................21
BS 2B 24 .............................................................20
BS 2TA 39 ...........................................................21
Help Us to Help
You!
Always quote your
Customer Number
Dont know your
number?
Contact
Customer Services
020 8996 9001
who will be happy to check it for you
11
British Standards
BRITISH STANDARDS
The following British Standard
publications are available from
BSI Customer Services (see How to order
on page 2).
The publications listed below are new
and revised British Standards that were
made available last month.
BS 8468-3.2:2009
BS EN ISO 927:2009
supersedes BS 4585-1:1983
ISBN 978 0 580 57814 4
34.00 members, 68.00 non-members
AW/7
PH/4
BS EN 934-3:2009
supersedes BS EN 934-3:2003
ISBN 978 0 580 62627 2
42.00 members, 84.00 non-members
B/525/31
B/517/3
BS EN PUBLICATIONS
BS EN 937:2009
NA to BS EN 1993-6:2007
BS EN ISO 287:2009
supersedes BS 8102:1990
ISBN 978 0 580 59399 4
79.00 members, 158.00 non-members
B/526
BS 8103-3:2009
Structural design of low-rise buildings. Code of
practice for timber floors and roofs for housing
supersedes BS 8103-3:1996
ISBN 978 0 580 55897 9
124.00 members, 248.00 non-members
B/204/2
CII/59
BS EN 973:2009
Chemicals used for treatment of water intended
for human consumption. Sodium chloride for
regeneration of ion exchangers
supersedes BS EN 973:2002
ISBN 978 0 580 65236 3
84.00 members, 168.00 non-members
CII/59
BS EN 1230-2:2009
supersedes BS EN 20287:1994
ISBN 978 0 580 59137 2
42.00 members, 84.00 non-members
BS EN 455-2:2009
Code of practice for protection of below
ground structures against water from the
ground
supersedes BS EN 937:1999
ISBN 978 0 580 58598 2
60.00 members, 120.00 non-members
PAI/11
BS 8102:2009
BS EN 778:2009
Domestic gas-fired forced convection air heaters
for space heating not exceeding a net heat
input of 70 kW, without a fan to assist
transportation of combustion air and/or
combustion products
supersedes BS EN 778:1998
ISBN 978 0 580 58603 3
109.00 members, 218.00 non-members
GSE/20
supersedes BS EN 1230-2:2001
ISBN 978 0 580 61492 7
42.00 members, 84.00 non-members
CW/47/3
BS EN ISO 1402:2009
Rubber and plastics hoses and hose assemblies.
Hydrostatic testing
supersedes BS EN ISO 1402:1997
ISBN 978 0 580 58411 4
42.00 members, 84.00 non-members
PRI/66/-/4
BS EN 1405:2009
Chemicals used for treatment of water intended
for human consumption. Sodium alginate
supersedes BS EN 1405:1998
ISBN 978 0 580 58595 1
42.00 members, 84.00 non-members
CII/59
BS EN ISO 787-7:2009
BS EN 1406:2009
supersedes BS 8409:2002
ISBN 978 0 580 65206 6
60.00 members, 120.00 non-members
supersedes BS 3483-B3:1982
ISBN 978 0 580 63618 9
34.00 members, 68.00 non-members
supersedes BS EN 1406:1998
ISBN 978 0 580 58596 8
42.00 members, 84.00 non-members
SW/65/5
STI/1
CII/59
BS 8409:2009
12
BS EN Publications continued...
BS EN 1639:2009
BS EN 3660-036:2009
BS EN 4114:2009
supersedes BS EN 1639:2004
ISBN 978 0 580 63624 0
42.00 members, 84.00 non-members
CH/106/4
supersedes BS EN 4114:2001
ISBN 978 0 580 59238 6
34.00 members, 68.00 non-members
ACE/69
ACE/6
BS EN 1640:2009
Dentistry. Medical devices for dentistry.
Equipment
supersedes BS EN 1640:2004
ISBN 978 0 580 63626 4
42.00 members, 84.00 non-members
CH/106/4
BS EN 1641:2009
Dentistry. Medical devices for dentistry.
Materials
supersedes BS EN 1641:2004
ISBN 978 0 580 63627 1
34.00 members, 68.00 non-members
BS EN 4234:2009
BS EN 3660-037:2009
supersedes BS EN 4234:2006
ISBN 978 0 580 59240 9
34.00 members, 68.00 non-members
ACE/69
ACE/6
BS EN 3730:2009
CH/106/2
BS EN 1642:2009
supersedes BS EN 3730:2001
ISBN 978 0 580 67710 6
42.00 members, 84.00 non-members
BS EN ISO 7886-3:2009
Sterile hypodermic syringes for single use. Autodisable syringes for fixed-dose immunization
ACE/6
BS EN ISO 3907:2009
CH/84
BS EN ISO 1890:2009
BS EN ISO 7579:2009
supersedes BS EN 23907:1993
ISBN 978 0 580 56454 3
34.00 members, 68.00 non-members
ISE/65
BS EN ISO 7886-4:2009
Sterile hypodermic syringes for single use.
Syringes with re-use prevention feature
supersedes BS EN ISO 7886-4:2006
ISBN 978 0 580 67783 0
60.00 members, 120.00 non-members
CH/84
PRI/42
BS EN 3987:2009
BS EN 2240-001:2009
Aerospace series. Lamps, incandescent.
Technical specification
no current standard is superseded
ISBN 978 0 580 68341 1
34.00 members, 68.00 non-members
ACE/6
BS EN ISO 2740:2009
BS EN ISO 9073-5:2008
BS EN ISO 4049:2009
BS EN ISO 9117-1:2009
ISE/65
supersedes BS EN 29117:1992
ISBN 978 0 580 59288 1
34.00 members, 68.00 non-members
STI/10
BS EN 4113:2009
Aerospace series. Clamps, loop (P type) in
corrosion resisting steel, passivated, with rubber
cushioning. Dimensions, masses
BS EN 10349:2009
supersedes BS EN 4113:2001
ISBN 978 0 580 59235 5
34.00 members, 68.00 non-members
ACE/61/-/49
ACE/69
ISE/6
BS EN 3464:2009
14
BS EN ISO 11138-2:2009
BS EN ISO 13479:2009
BS EN ISO 15011-3:2009
WEE/40
PRI/88/4
BS EN ISO 11138-3:2009
Sterilization of health care products. Biological
indicators. Biological indicators for moist heat
sterilization processes
supersedes BS EN ISO 11138-3:2006
ISBN 978 0 580 65850 1
42.00 members, 84.00 non-members
LBI/35
BS EN ISO 15156-1:2009
BS EN 13523-27:2009
Coil coated metals. Test methods. Resistance to
humid poultice (Cataplasm test)
no current standard is superseded
ISBN 978 0 580 58893 8
34.00 members, 68.00 non-members
STI/27
BS EN ISO 11140-1:2009
BS EN 14232:2009
BS EN ISO 15156-2:2009
LBI/35
RPI/13
BS EN ISO 11357-1:2009
BS EN ISO 14607:2009
PRI/21
CH/150
BS EN ISO 11810-1:2009
Lasers and laser-related equipment. Test
method and classification for the laser
resistance of surgical drapes and/or patient
protective covers. Primary ignition and
penetration
supersedes BS EN ISO 11810-1:2005
ISBN 978 0 580 65614 9
42.00 members, 84.00 non-members
CPW/172/9
BS EN ISO 11810-2:2009
Lasers and laser-related equipment. Test
method and classification for the laserresistance of surgical drapes and/or patientprotective covers. Secondary ignition
supersedes BS EN ISO 11810-2:2007
ISBN 978 0 580 65203 5
42.00 members, 84.00 non-members
BS EN ISO 14630:2009
Non-active surgical implants. General
requirements
BS EN 15269-7:2009
CH/150
BS EN ISO 15011-1:2009
FSH/22/5
BS EN 15503:2009
Garden equipment. Garden blowers, vacuums
and blower/vacuums. Safety
no current standard is superseded
ISBN 978 0 580 56762 9
69.00 members, 138.00 non-members
AGE/20
CPW/172/9
BS EN ISO 15011-2:2009
BS EN ISO 11980:2009
Ophthalmic optics. Contact lenses and contact
lens care products. Guidance for clinical
investigations
CH/172/9
WEE/40
BS EN ISO 15156-3:2009
To order visit
www.bsigroup.com/shop
15
BS EN Publications continued...
BS EN 15657-1:2009
BS EN ISO 15927-3:2009
BS EN ISO 28199-2:2009
EH/1/6
BS EN ISO 16773-3:2009
BS EN ISO 28199-3:2009
PSE/18/5
STI/10
STI/10
BS EN ISO 16773-4:2009
BS ENs IMPLEMENTED BY
AMENDMENT
BS EN 15714-1:2009
BS EN 15714-2:2009
Industrial valves. Actuators. Electric actuators
for industrial valves. Basic requirements
no current standard is superseded
ISBN 978 0 580 54840 6
60.00 members, 120.00 non-members
PSE/18/5
BS EN 15714-3:2009
STI/10
BS EN 15714-4:2009
Industrial valves. Actuators. Hydraulic part-turn
actuators for industrial valves. Basic
requirements
no current standard is superseded
ISBN 978 0 580 54844 4
60.00 members, 120.00 non-members
PSE/18/5
BS EN 15749:2009
BS EN ISO/IEC 19796-1:2009
BS EN ISO 21649:2009
Needle-free injectors for medical use.
Requirements and test methods
supersedes BS EN ISO 21649:2006
ISBN 978 0 580 67782 3
69.00 members, 138.00 non-members
CII/37
BS EN 15779:2009
(BS 2000-578:2009)
Petroleum products and fat and oil derivates.
Fatty acid methyl esters (FAME) for diesel
engines. Determination of polyunsaturated
( 4 double bonds) fatty acid methyl esters
(PUFA) by gas chromatography
no current standard is superseded
ISBN 978 0 580 61775 1
19.50 members, 26.00 non-members
PTI/13
16
CH/84
BS IMPLEMENTATIONS
BS EN ISO 24978:2009
Intelligent transport systems. ITS Safety and
emergency messages using any available
wireless media. Data registry procedures
no current standard is superseded
ISBN 978 0 580 56103 0
90.00 members, 180.00 non-members
EPL/278
BS EN ISO 28139:2009
Agricultural and forestry machinery. Knapsack
combustion engine-driven mistblowers. Safety
requirements
no current standard is superseded
ISBN 978 0 580 59914 9
60.00 members, 120.00 non-members
AGE/15
BS EN ISO 28199-1:2009
Paints and varnishes. Evaluation of properties of
coating systems related to the application
process. Relevant vocabulary and preparation of
test panels
BS ISO 1920-8:2009
Testing of concrete. Determination of the
drying shrinkage of concrete for samples
prepared in the field or in the laboratory
no current standard is superseded
ISBN 978 0 580 59476 2
60.00 members, 120.00 non-members
B/517/1
BS ISO 1920-9:2009
Testing of concrete. Determination of creep of
concrete cylinders in compression
STI/10
B/517/1
BS ISO 2041:2009
BS ISO 7199:2009
BS ISO 10596:2009
supersedes BS 3015:1991
ISBN 978 0 580 60285 6
84.00 members, 168.00 non-members
GME/21/1
CH/150/2
EPL/80
BS ISO 7404-2:2009
BS ISO 10643:2009
supersedes BS 6127-2:1982
ISBN 978 0 580 56502 1
60.00 members, 120.00 non-members
PAI/11
PTI/16
MTE/18
BS ISO 7404-3:2009
BS ISO 10770-1:2009
supersedes BS 6127-3:1995
ISBN 978 0 580 56503 8
42.00 members, 84.00 non-members
BS ISO 2470-1:2009
BS ISO 2470-2:2008
Paper, board and pulps. Measurement of diffuse
blue reflectance factor. Outdoor daylight
conditions (D65 brightness)
no current standard is superseded
ISBN 978 0 580 58712 2
42.00 members, 84.00 non-members
PAI/11
MCE/18/-/8
PTI/16
BS ISO 2471:2008
Paper and board. Determination of opacity
(paper backing). Diffuse reflectance method
BS ISO 7404-5:2009
PAI/11
supersedes BS 6127-5:1995
ISBN 978 0 580 56505 2
60.00 members, 120.00 non-members
BS ISO 2834-3:2008
Graphic technology. Laboratory preparation of
test prints. Screen printing inks
no current standard is superseded
ISBN 978 0 580 55011 9
42.00 members, 84.00 non-members
PAI/43
BS ISO 4229:2009
Assembly tools for screws and nuts. Single-head
engineers wrenches for lower torque
applications. Maximum outside dimensions of
heads and test torques
no current standard is superseded
ISBN 978 0 580 61830 7
34.00 members, 68.00 non-members
MTE/15
PTI/16
BS ISO 10816-2:2009
Mechanical vibration. Evaluation of machine
vibration by measurements on non-rotating
parts. Land-based steam turbines and
generators in excess of 50 MW with normal
operating speeds of 1500 r/min, 1800 r/min,
3000 r/min and 3600 r/min
supersedes BS ISO 10816-2:2001
ISBN 978 0 580 65269 1
60.00 members, 120.00 non-members
GME/21/5
BS ISO 7919-2:2009
Mechanical vibration. Evaluation of machine
vibration by measurements on rotating shafts.
Land-based steam turbines and generators in
excess of 50 MW with normal operating speeds
of 1500 r/min, 1800 r/min, 3000 r/min and
3600 r/min
supersedes BS ISO 7919-2:2001
ISBN 978 0 580 65268 4
60.00 members, 120.00 non-members
GME/21/5
BS ISO 7919-4:2009
BS ISO 10816-4:2009
Mechanical vibration. Evaluation of machine
vibration by measurements on non-rotating
parts. Gas turbine sets with fluid-film bearings
supersedes BS 7854-4:1998
ISBN 978 0 580 64809 0
60.00 members, 120.00 non-members
GME/21/5
BS ISO 10975:2009
GME/21/5
AGE/6
BS ISO 6145-5:2009
BS ISO 8407:2009
BS ISO 11012:2009
Heavy commercial vehicles and buses. Openloop test methods for the quantification of oncentre handling. Weave test and transition test
supersedes BS 7545:1991
ISBN 978 0 580 55725 5
42.00 members, 84.00 non-members
PTI/15
ISE/NFE/8
AUE/15
BS ISO 4395:2009
Fluid power systems and components. Cylinder
piston rod end types and dimensions
no current standard is superseded
ISBN 978 0 580 60897 1
42.00 members, 84.00 non-members
MCE/18/-/3
17
BS Implementations continued...
BS ISO 11663:2009
BS ISO 15394:2009
BS ISO 22179:2009
PKW/0
EPL/278
BS ISO/IEC 11693-2:2009
Identification cards. Optical memory cards.
Co-existence of optical memory with other
machine readable technology
no current standard is superseded
ISBN 978 0 580 61520 7
34.00 members, 68.00 non-members
BS ISO 15511:2009
Information and documentation. International
standard identifier for libraries and related
organizations (ISIL)
IST/17
BS ISO 12635:2008
IDT/2/7
BS ISO 22514-1:2009
Statistical methods in process management.
Capability and performance. General principles
and concepts
no current standard is superseded
ISBN 978 0 580 54842 0
69.00 members, 138.00 non-members
SS/4
BS ISO 13959:2009
Water for haemodialysis and related therapies
no current standard is superseded
ISBN 978 0 580 62457 5
60.00 members, 120.00 non-members
BS ISO 22915-7:2009
BS ISO 15674:2009
Cardiovascular implants and artificial organs.
Hard-shell cardiotomy/venous reservoir systems
(with/without filter) and soft venous reservoir
bags
supersedes BS ISO 15674:2001
ISBN 978 0 580 62454 4
42.00 members, 84.00 non-members
BS ISO 14401-1:2009
Earth-moving machinery. Field of vision of
surveillance and rear-view mirrors. Test methods
supersedes BS ISO 14401-1:2004
ISBN 978 0 580 56175 7
42.00 members, 84.00 non-members
CH/150/2
BS ISO 22915-21:2009
BS ISO 15675:2009
Industrial trucks. Verification of stability. Orderpicking trucks with operator position elevating
above 1200mm
CH/150/2
BS ISO 14242-3:2009
BS ISO 16063-31:2009
Methods for the calibration of vibration and
shock transducers. Testing of transverse
vibration sensitivity
supersedes BS 6955-11:1994
ISBN 978 0 580 63215 0
60.00 members, 120.00 non-members
MHE/7
BS ISO 24097-1:2009
Intelligent transport systems. Using web services
(machine-machine delivery) for ITS service
delivery. Realization of interoperable web
services
no current standard is superseded
ISBN 978 0 580 58431 2
84.00 members, 168.00 non-members
EPL/278
GME/21/2
B/513/1
BS ISO 24631-1:2009
BS ISO 14401-2:2009
BS ISO 14813-6:2009
BS ISO 17832:2009
Non-parallel steel wire and cords for tyre
reinforcement
no current standard is superseded
ISBN 978 0 580 59984 2
42.00 members, 84.00 non-members
ISE/71
BS ISO 24631-2:2009
BS ISO 22089:2009
Aerospace. Hydraulic power transfer units.
General specifications
EPL/278
ACE/69
AGE/6/1
18
BS ISO 24631-3:2009
BS ISO 28178:2009
PD ISO/TR 16268:2009
AGE/6/1
BS ISO 24631-4:2009
Radiofrequency identification of animals.
Evaluation of performance of RFID transceivers
conforming with ISO 11784 and ISO 11785
no current standard is superseded
ISBN 978 0 580 57202 9
60.00 members, 120.00 non-members
BS ISOs IMPLEMENTED BY
AMENDMENT
For the standards listed below see also
the Amendment to British Standards and
Updated British Standards sections of
this issue of Update Standards.
PD ISO/TR 24699:2009
Rubber and rubber products. Environmental
aspects. General guidelines for their inclusion in
standards
no current standard is superseded
ISBN 978 0 580 58669 9
42.00 members, 84.00 non-members
PRI/90
AGE/6/1
BS ISO 8178-6:2000
BS ISO/IEC 24713-3:2009
Information technology. Biometric profiles for
interoperability and data interchange.
Biometrics-based verification and identification
of seafarers
no current standard is superseded
ISBN 978 0 580 56519 9
79.00 members, 158.00 non-members
IST/44
PUBLISHED DOCUMENTS
PD 6682-1:2009
Aggregates. Aggregates for concrete. Guidance
on the use of BS EN 12620
BS ISO 25518:2009
Single-use rubber gloves for general
applications. Specification
no current standard is superseded
ISBN 978 0 580 57105 3
42.00 members, 84.00 non-members
DD CEN/TS 14940-1:2009
PD 6682-6:2009
supersedes PD 6682-6:2003
ISBN 978 0 580 65330 8
69.00 members, 138.00 non-members
BS ISO 26842-1:2009
Adhesives. Test methods for the evaluation and
selection of adhesives for indoor wood
products. Resistance to delamination in nonsevere environments
no current standard is superseded
ISBN 978 0 580 66901 9
42.00 members, 84.00 non-members
PRI/52
B/502
BS ISO 26722:2009
CH/150/2
CH/106/4
DD ISO/TS 11080:2009
supersedes PD 6682-1:2003
ISBN 978 0 580 65306 3
69.00 members, 138.00 non-members
CH/205/3
B/502
PD 6688-1-4:2009
Background information to the National Annex
to BS EN 1991-1-4 and additional guidance
no current standard is superseded
ISBN 978 0 580 58273 8
84.00 members, 168.00 non-members
DD CEN/TS 15606:2009
Foodstuffs. Determination of acesulfame-K,
aspartame, neohesperidine-dihydrochalcone
and saccharin. High performance liquid
chromatographic method
no current standard is superseded
ISBN 978 0 580 57999 8
34.00 members, 68.00 non-members
AW/-/3
B/525/1
PD ISO/TR 10809-1:2009
DD ISO/TS 21220:2009
BS ISO 26842-2:2009
PD CEN/TR 15894:2009
PRI/52
B/538/4
IST/35
DD ISO/TS 22224:2009
Health informatics. Electronic reporting of
adverse drug reactions
19
Aerospace Series
BS 3B 29:2009
BS 2HR 203:2009
supersedes BS 2B 29:2001
ISBN 978 0 580 62844 3
34.00 members, 68.00 non-members
supersedes BS HR 203:1972
ISBN 978 0 580 67307 8
34.00 members, 68.00 non-members
supersedes BS B 23:1991
ISBN 978 0 580 62838 2
34.00 members, 68.00 non-members
ACE/61
ACE/61
BS 3B 30:2009
BS 2HR 204:2009
AEROSPACE SERIES
BS 2B 23:2009
ACE/61
BS 2B 24:2009
Specification for copper-tin-phosphorous alloy
rods and sections
supersedes BS B 24:1991
ISBN 978 0 580 62839 9
34.00 members, 68.00 non-members
supersedes BS 2B 30:2001
ISBN 978 0 580 62845 0
34.00 members, 68.00 non-members
ACE/61
ACE/61
supersedes BS HR 204:1972
ISBN 978 0 580 67308 5
34.00 members, 68.00 non-members
ACE/61
BS 3B 25:2009
Specification for copper-nickel-silicon alloy rods,
bars, sections, forging stock and forgings (heat
treated)
supersedes BS 2B 25:2001
ISBN 978 0 580 62840 5
34.00 members, 68.00 non-members
ACE/61
BS 3B 26:2009
Specification for copper-nickel-silicon alloy rods,
bars and sections (solution treated, cold worked
and precipitation treated)
supersedes BS 2B 26:2001
ISBN 978 0 580 62841 2
34.00 members, 68.00 non-members
BS 3B 31:2009
Specification for copper-beryllium alloy strip
and foil (solution treated, cold rolled: full hard
and precipitation treated)
BS 2HR 205:2009
supersedes BS 2B 31:2001
ISBN 978 0 580 62846 7
34.00 members, 68.00 non-members
supersedes BS HR 205:1989
ISBN 978 0 580 67309 2
34.00 members, 68.00 non-members
ACE/61
ACE/61
BS 3B 32:2009
BS 2HR 206:2009
supersedes BS 2B 32:2001
ISBN 978 0 580 62847 4
34.00 members, 68.00 non-members
ACE/61
BS 3B 27:2009
Specification for copper-zinc-aluminium-nickelsilicon alloy tube
supersedes BS 2B 27:2002
ISBN 978 0 580 62842 9
34.00 members, 68.00 non-members
ACE/61
BS 3B 28:2009
Specification for copper-beryllium alloy strip
and foil (solution treated and precipitation
treated)
BS 3B 33:2009
supersedes BS 2B 33:2001
ISBN 978 0 580 62848 1
34.00 members, 68.00 non-members
ACE/61
supersedes BS 2B 28:2001
ISBN 978 0 580 62843 6
34.00 members, 68.00 non-members
BS 2HR 207:2009
Specification for nickel-iron-chromiummolybdenum-aluminium-titanium heat-resisting
alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5,
Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
supersedes BS HR 207:1973
ISBN 978 0 580 67311 5
34.00 members, 68.00 non-members
ACE/61
BS 3HR 201:2009
ACE/61
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
20
supersedes BS HR 206:1973
ISBN 978 0 580 67310 8
34.00 members, 68.00 non-members
ACE/61
ACE/61
BS 2HR 208:2009
Specification for nickel-chromium-iron alloy
plate, sheet and strip: annealed (nickel base,
Cr 15.5, Fe 8)
supersedes BS HR 208:1989
ISBN 978 0 580 67312 2
34.00 members, 68.00 non-members
ACE/61
BS 3HR 202:2009
Specification for nickel-chromium-cobalttitanium-aluminium heat-resisting alloy sheet
and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5,
Al 1.5)
BS 3TA 1:2009
Specification for sheet and strip of commercially
pure titanium (tensile strength 290-420 MPa)
ACE/61
ACE/61/-/49
BS 3TA 2:2009
BS 3TA 28:2009
BS 2TA 46:2009
BS 3TA 6:2009
Specification for sheet and strip of commercially
pure titanium (tensile strength 570-730 MPa)
supersedes BS 2TA 6:1973
ISBN 978 0 580 65383 4
34.00 members, 68.00 non-members
ACE/61/-/49
BS 3TA 7:2009
Specification for bar and section for machining
of commercially pure titanium (tensile strength
540-740 MPa)
supersedes BS 2TA 7:1973
ISBN 978 0 580 65384 1
34.00 members, 68.00 non-members
ACE/61/-/49
BS 3TA 10:2009
ACE/61/-/49
BS 2TA 38:2009
Specification for bar for machining of titaniumaluminium-molybdenum-tin-silicon-carbon alloy
(tensile strength 1250-1420 MPa) (limiting
ruling section 25 mm)
supersedes BS TA 38:1971
ISBN 978 0 580 65363 6
34.00 members, 68.00 non-members
ACE/61/-/49
BS 2TA 40:2009
BS 3TA 12:2009
Specification for forging stock of titaniumaluminium-vanadium alloy (tensile strength
900-1160 MPa) (limiting ruling section 150 mm)
supersedes BS 2TA 12:1974
ISBN 978 0 580 65387 2
34.00 members, 68.00 non-members
ACE/61/-/49
BS 3TA 13:2009
Specification for forgings of titaniumaluminium-vanadium alloy (tensile strength
900-1160 MPa) (limiting ruling section 150 mm)
supersedes BS 2TA 13:1974
ISBN 978 0 580 65388 9
34.00 members, 68.00 non-members
ACE/61/-/49
BS 3TA 11:2009
BS 2TA 47:2009
BS 2TA 39:2009
ACE/61/-/49
supersedes BS TA 46:1973
ISBN 978 0 580 65369 8
34.00 members, 68.00 non-members
BS 2TA 48:2009
Specification for forgings of titaniumaluminium-molybdenum-tin-silicon-carbon alloy
(tensile strength 1050-1200 MPa) (limiting
ruling section 100 mm)
supersedes BS TA 48:1973
ISBN 978 0 580 65371 1
34.00 members, 68.00 non-members
ACE/61
BS 2TA 49:2009
Specification for bar and section for machining
of titanium-aluminium-molybdenum-tin-siliconcarbon alloy (tensile strength 1000-1200 MPa)
(limiting ruling section over 100 mm up to and
including 150 mm)
ACE/61/-/49
supersedes BS TA 49:1973
ISBN 978 0 580 65372 8
34.00 members, 68.00 non-members
BS 2TA 41:2009
ACE/61
BS 2TA 50:2009
supersedes BS TA 41:1971
ISBN 978 0 580 65366 7
34.00 members, 68.00 non-members
ACE/61/-/49
BS 2TA 42:2009
Specification for forgings of titaniumaluminium-molybdenum-tin-silicon-carbon alloy
(tensile strength 1205-1375 MPa) (limiting
ruling section over 25 mm up to and including
75 mm)
supersedes BS TA 42:1971
ISBN 978 0 580 65367 4
34.00 members, 68.00 non-members
ACE/61/-/49
ACE/61/-/49
BS 2TA 51:2009
Specification for forgings of titaniumaluminium-molybdenum-tin-silicon alloy (tensile
strength 1000-1200 MPa) (limiting ruling section
over 100 mm up to and including 150 mm)
supersedes BS TA 51:1973
ISBN 978 0 580 65460 2
34.00 members, 68.00 non-members
ACE/61
BS 2TA 45:2009
Specification for sheet and strip of titaniumcopper alloy (tensile strength 540-700 MPa)
supersedes BS TA 45:1973
ISBN 978 0 580 65368 1
34.00 members, 68.00 non-members
supersedes BS TA 52:1973
ISBN 978 0 580 65461 9
34.00 members, 68.00 non-members
ACE/61/-/49
ACE/61/-/49
ACE/61
BS 3TA 21:2009
BS 2TA 52:2009
Specification for sheet and strip of titaniumcopper alloy (tensile strength 690-920 MPa)
21
BS 2TA 57:2009
Specification for plate of titanium-aluminiummolybdenum-tin-silicon alloy (tensile strength
1030-1220 MPa) (thickness over 50 mm up to
and including 65 mm)
supersedes BS TA 57:1974 which remains current
ISBN 978 0 580 65463 3
34.00 members, 68.00 non-members
ACE/61
CORRIGENDA TO BRITISH
STANDARDS
Most amendments are not issued
separately. Those that make significant
changes to a standard are incorporated
into the standard which is reissued (see
Updated British Standards). British
Standards which have been corrected via
corrigenda are available on request, free
of charge to past purchasers of the
standard. All amendments and corrigenda
to date of despatch are included within
any main publication when ordered for
the first time.
The following corrigenda to British
Standards were made available last
month.
BS EN 60384-3:2006
Fixed capacitors for use in electronic
equipment. Sectional specification: Surface
mount fixed tantalum electrolytic capacitors
with manganese dioxide solid electrolyte
CORRIGENDUM 1
EPL/40X
BS EN 60393-1:2009
Potentiometers for use in electronic equipment.
Generic specification
CORRIGENDUM 1
EPL/40X
BS EN 60896-22:2004
Stationary lead-acid batteries. Valve regulated
types. Requirements
CORRIGENDUM 1
PEL/21
BS EN 60950-1:2001
BS 2TA 58:2009
Specification for plate of titanium-copper alloy
(tensile strength 520-640 MPa) (maximum
thickness 10 mm)
supersedes BS TA 58:1974
ISBN 978 0 580 65464 0
34.00 members, 68.00 non-members
BS 460:2002+A2:2007
CORRIGENDUM 2
CORRIGENDUM 2
EPL/108
PSE/10
BS ISO 8178-6:2000
Reciprocating internal combustion engines.
Exhaust emission measurement. Report of
measuring results and test
ACE/61
BS 870:2008
CORRIGENDUM 2
MCE/14/-/3
BS 2TA 59:2009
CORRIGENDUM 2
TDW/4
supersedes BS TA 59:1980
ISBN 978 0 580 65465 7
34.00 members, 68.00 non-members
ACE/61
BS 3TA 100:2009
Procedure for inspection, testing and
acceptance of wrought titanium and titanium
alloys
supersedes BS 2TA 100:1973
ISBN 978 0 580 65391 9
79.00 members, 158.00 non-members
ACE/61/-/49
UPDATED BRITISH
STANDARDS
BS 5422:2009
Method for specifying thermal insulating
materials for pipes, tanks, vessels, ductwork and
equipment operating within the temperature
range -40C to +700C
CORRIGENDUM 1
B/540/7
BS EN 2955:1993
CORRIGENDUM 1
PUBLICLY AVAILABLE
SPECIFICATIONS
BS EN 609-1:1999+A2:2009
Agricultural and forestry machinery. Safety of
log splitters. Wedge splitters
AMENDMENT 2
42.00 members, 84.00 non-members
BS EN 10269:1999+A1:2006
Steels and nickel alloys for fasteners with
specified elevated and/or low temperature
properties
CORRIGENDUM 4
ISE/73/2
AGE/29
BS EN 609-2:1999+A1:2009
Agricultural and forestry machinery. Safety of
log splitters. Screw splitters
AMENDMENT 1
42.00 members, 84.00 non-members
AGE/29
BS EN 794-3:1998+A2:2009
PAS 66:2009
BS EN ISO/IEC 19796-1:2009
22
CORRIGENDUM 1
CH/121/5
IST/43
BS EN 1218-5:2004+A1:2009
BS EN ISO 9902-1:2001+A1:2009
BS EN 13501-2:2007+A1:2009
AMENDMENT 1
84.00 members, 168.00 non-members
AMENDMENT 1
60.00 members, 120.00 non-members
TCI/33
MTE/23
AMENDMENT 1
90.00 members, 180.00 non-members
FSH/22
BS EN ISO 9902-2:2001+A1:2009
BS EN 1422:1997+A1:2009
AMENDMENT 1
60.00 members, 120.00 non-members
AMENDMENT 1
84.00 members, 168.00 non-members
TCI/33
LBI/35
BS EN ISO 9902-3:2001+A1:2009
Textile machinery. Noise test code. Nonwoven
machinery
BS EN 1807:1999+A1:2009
Safety of woodworking machines. Band sawing
machines
AMENDMENT 1
42.00 members, 84.00 non-members
TCI/33
BS EN 1870-8:2001+A1:2009
Safety of woodworking machines. Circular
sawing machines. Single blade edging circular
rip sawing machines with power driven saw
unit and manual loading and/or unloading
AMENDMENT 1
84.00 members, 168.00 non-members
BS EN 13501-4:2007+A1:2009
AMENDMENT 1
69.00 members, 138.00 non-members
AMENDMENT 1
42.00 members, 84.00 non-members
FSH/22
TCI/33
BS EN 13501-5:2005+A1:2009
BS EN ISO 9902-6:2001+A1:2009
BS EN 1870-9:2000+A1:2009
AMENDMENT 1
60.00 members, 120.00 non-members
TCI/33
AMENDMENT 1
69.00 members, 138.00 non-members
MTE/23
AMENDMENT 1
69.00 members, 138.00 non-members
AMENDMENT 1
79.00 members, 158.00 non-members
FSH/22
AMENDMENT 1
60.00 members, 120.00 non-members
BS EN ISO 9902-5:2001+A1:2009
MTE/23
BS EN 1870-10:2003+A1:2009
AMENDMENT 1
90.00 members, 180.00 non-members
MTE/23
BS EN 13501-3:2005+A1:2009
BS EN ISO 11111-2:2005+A1:2009
TCI/33
BS EN 14180:2003+A2:2009
Sterilizers for medical purposes. Low
temperature steam and formaldehyde
sterilizers. Requirements and testing
AMENDMENT 2
84.00 members, 168.00 non-members
LBI/35
BS EN 12779:2004+A1:2009
Safety of woodworking machines. Chip and
dust extraction systems with fixed installation.
Safety related performances and safety
requirements
MTE/23
AMENDMENT 1
84.00 members, 168.00 non-members
BS EN 1870-11:2003+A1:2009
MTE/23
BS EN 15376:2007+A1:2009
Automotive fuels. Ethanol as a blending
component for petrol. Requirements and test
methods
AMENDMENT 1
34.00 members, 68.00 non-members
BS EN 13060:2004+A1:2009
AMENDMENT 1
79.00 members, 158.00 non-members
AMENDMENT 1
90.00 members, 180.00 non-members
BS EN 60059:1999+A1:2009
MTE/23
LBI/35
AMENDMENT 1
34.00 members, 68.00 non-members
BS EN 1889-2:2003+A1:2009
BS EN 13501-1:2007+A1:2009
BS EN 60598-1:2008
AMENDMENT 1
84.00 members, 168.00 non-members
AMENDMENT 1
84.00 members, 168.00 non-members
AMENDMENT 11
114.00 members, 228.00 non-members
MRE/1
FSH/21
CPL/34/4
PTI/2
GEL/8
23
Special Announcements
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or by
post to named contacts at:
BSI Head Office
389 Chiswick High Road
London W4 4AL
Tel: 020 8996 9000
BS 5950-1:2001
Structural use of steelwork in building. Code of
practice for design. Rolled and welded sections
BS 5950-4:1994
Structural use of steelwork in building. Code of
practice for design of composite slabs with
profiled steel sheeting
BS 5950-6:1995
Structural use of steelwork in building. Code of
practice for design of light gauge profiled steel
sheeting
BRITISH STANDARDS
PROPOSED FOR
CONFIRMATION
It is BSI policy for every standard to be
reviewed by the technical committee
responsible not more than five years after
publication, to establish whether it is still
current and, if it is not, to identify and set
in hand appropriate action.
BS 131-7:1998
Notched bar tests. Specification for verification
of the test machine used for precision
determination of Charpy V-notch impact
energies for metals
ISE/NFE/4/4
BS 350:2004
Conversion factors for units
SS/7
BS 493:1995
B/519/1
BS 4999-103:2004
General requirements for rotating electrical
machines. Specification for symbols
BS 567:1973
Specification for asbestos-cement flue pipes and
fittings, light quality
B/506
BS 598-112:2004
Sampling and examination of bituminous
mixtures for roads and other paved areas.
Method for the use of road surface hardness
probe
B/510/2
PEL/2
BS 822-6:2004
BRITISH STANDARDS
REVIEWED AND
CONFIRMED
It is BSI policy for every standard to be
reviewed by the technical committee
responsible not more than five years after
publication, to establish whether it is still
current and, if it is not, to identify and set
in hand appropriate action.
BS 835:1973
Specification for asbestos-cement flue pipes and
fittings, heavy quality
B/506
BS 842:1965
PEL/23
BS 1054:1975
Specification for engineers comparators for
external measurement
TDW/4
BS 5950-8:2003
Structural use of steelwork in building. Code of
practice for fire resistant design
BS 41:1973
BS 1127-2:1990
B/506
MTE/18
BS 5950-9:1994
Structural use of steelwork in building. Code of
practice for stressed skin design
These documents have been reviewed and
confirmed without change by the
UK committee B/525/31. These documents are
superseded by the Eurocodes EN 1993 and are
due to be withdrawn in March 2010 when the
Eurocodes will be fully implemented.
Contact: Clare Price
Email: clare.price@bsigroup.com
B/525/31
24
BS 65:1991
Specification for vitrified clay pipes, fittings and
ducts, also flexible mechanical joints for use
solely with surface water pipes and fittings
BS 1347:1986
B/505
TDW/4
BS 131-6:1998
BS 1377-1:1990
ISE/NFE/4/4
B/526/3
BS 1377-2:1990
BS 1449-1.14:1991
BS 2000-50:1993
Steel plate, sheet and strip. Carbon and carbonmanganese plate, sheet and strip. Specification
for hot rolled narrow strip supplied in a range
of conditions for heat treatment and general
engineering purposes
B/526/3
PTI/13
ISE/10
BS 1377-3:1990
Methods of test for soils for civil engineering
purposes. Chemical and electro-chemical tests
B/526/3
BS 2000-61:1999
BS 1660-5:1996
Machine tapers. Specification for reduction
sleeves with external and internal 7/24 tapers
MTE/18
BS 1377-4:1990
Methods of test for soils for civil engineering
purposes. Compaction-related tests
B/526/3
BS 2000-76:1993
BS 1660-12:1996
Machine tapers. Specification for positive drive
of Morse tapers
MTE/18
BS 1377-5:1990
Methods of test for soils for civil engineering
purposes. Compressibility, permeability and
durability tests
B/526/3
BS 2000-0.1:1999
Methods of test for petroleum and its products.
General introduction. Specifications. IP standard
thermometers
BS 2000-107:1993
Methods of test for petroleum and its products.
Determination of sulfur. Lamp combustion
method
PTI/13
PTI/13
BS 1377-6:1990
Methods of test for soils for civil engineering
purposes. Consolidation and permeability tests
in hydraulic cells and with pore pressure
measurement
B/526/3
BS 1377-7:1990
Methods of test for soils for civil engineering
purposes. Shear strength tests (total stress)
B/526/3
BS 2000-0.2:1996
Methods of test for petroleum and its products.
General introduction. Specifications for IP
standard reference liquids
BS 2000-0.4:1996
Methods of test for petroleum and its products.
General introduction. Barometric pressure
corrections
BS 2000-137:1993
Methods of test for petroleum and its products.
Determination of oil content of water mix
metalworking oil dilutions
PTI/13
BS 1377-8:1990
B/526/3
PTI/13
PTI/13
BS 2000-133:1993
BS 2000-1:1995
Methods of test for petroleum and its products.
Determination of acidity, neutralization value.
Colour indicator titration method
BS 2000-142:1993
Methods of test for petroleum and its products.
Determination of oxidation stability of
lubricating grease. Oxygen bomb method
PTI/13
PTI/13
BS 1407:1970
Specification for high carbon bright steel (silver
steel)
ISE/31
BS 2000-10:1995
Methods of test for petroleum and its products.
Determination of kerosine burning
characteristics. 24 hour method
PTI/13
BS 1428-D4:1963
(BS 797:1963)
Microchemical apparatus. Volumetric analysis.
Specification for capillary pipettes
BS 2000-179:1993
BS 2000-12:1993
BS 2000-195:1998
PTI/13
PTI/13
BS 2000-35:1993
BS 2000-213:1993
PTI/13
PTI/13
BS 1449-1.8:1991
BS 2000-48:1997
BS 2000-223:1993
Steel plate, sheet and strip. Carbon and carbonmanganese plate, sheet and strip. Specification
for hot rolled narrow strip based on formability
ISE/10
PTI/13
PTI/13
LBI/36
BS 1449-1.1:1991
Steel plate, sheet and strip. Carbon and carbonmanganese plate, sheet and strip. General
specification
ISE/10
25
BS 2543:2004
BS 4787-1:1980
PTI/13
BS 2738-3:2004+A1:2008
TCI/66
B/538/2
BS 4811:1972
CH/172/3
IDT/2
PTI/13
BS 2772-2:1989
BS 4812:1972
BS 2000-306:1994
BS 2000-313:2001
IDT/2
ISE/31
BS 2782-0:2004
PTI/13
PRI/21
BS 2000-317:1995
BS 2782-7:Method 720B:1979
BS 4894:1993
PRI/21
FME/9/3
BS 2975-1:2004
BS 5046:1974
BS 4875-8:1998
Furniture. Strength and stability of furniture.
Methods for determination of stability of nondomestic storage furniture
FW/0
PTI/13
BS 2000-346:1996
Methods of test for petroleum and its products.
Determination of polycyclic aromatics in unused
lubricating base oils and asphaltene free
petroleum fractions. Dimethyl sulphoxide
extraction refractive index method
PTI/13
BS 2979:1958
Transliteration of Cyrillic and Greek characters
BS 5248:1990
Specification for aspirated hygrometer
LBI/36
IDT/2
BS 2000-450:2000
Methods of test for petroleum and its products.
Diesel fuel. Assessment of lubricity using the
high-frequency reciprocating rig (HFRR). Test
method
BS 3459:1985
Specification for stands for drawing boards
TDW/4
PTI/13
BS 3509:1962
BS 2000-454:2000
TDW/4
PTI/13
BS 4177:1992
PEL/23
PTI/13
BS 2000-456:2000
Methods of test for petroleum and its products.
Determination of potassium in gasoline. Atomic
absorption spectrometry (AAS) method
PTI/13
BS 5266-2:1998
Emergency lighting. Code of practice for
electrical low mounted way guidance systems
for emergency use
CPL/34/9
BS 5266-4:1999
BS 2000-455:2001
Methods of test for petroleum and its products.
Determination of manganese in gasoline.
Atomic absorption spectrometry (AAS) method
BS 5252:1976
BS 4280:1968
Transliteration of Arabic characters
IDT/2
BS 4315-2:1970
BS 5266-5:1999
B/519/1
BS 5266-6:1999
BS 4358:1968
Glossary of terms used in air gauging with
notes on the technique
Emergency lighting. Code of practice for nonelectrical low mounted way guidance systems
for emergency use. Photoluminescent systems
TDW/4
CPL/34/9
BS 4484-1:1969
BS 5276-2:2003
TDW/4
TDW/4
PVE/1
BS 2457:1975
Specification for protractors for drawing office
use
TDW/4
BS 2459:1974
26
BS 5285:1975
BS 5656-2:2004
BS 5977-1:1981
MHE/4
BS 6037-2:2004
CPL/59
BS 5346:1976
Specification. ISO metric trapezoidal screw
threads
BS 5682:1998
FME/9/3
B/519/3
CH/121/1
BS 5459-2:2000+A2:2008
Specification for performance requirements and
tests for office furniture. Office pedestal seating
for use by persons weighing up to 150kg and
for use up to 24 hours a day, including typeapproval tests for individual components
BS 6133:1995
BS 5854:1980
Code of practice for flues and flue structures in
buildings
B/506
FW/0/3
BS 6165:2002
BS 5864:2004
BS 5507-1:1977
Methods of test for falsework equipment. Floor
centres
B/514
B/514
FSH/2
BS 6172:2004
BS 5507-3:1982
Methods of test for falsework equipment. Props
BS 5867-1:2004
Textiles and textile products. Curtains and
drapes. General requirements
TCI/66
BS 5605:1990
Recommendations for citing and referencing
published material
IDT/2/2
BS 6259:1997
BS 5884:1999
Magnetic materials. Methods for the
determination of the relative magnetic
permeability of feebly magnetic materials
BS 5642-1:1978
ISE/NFE/5
BS 6371:1983
BS 5950-1:2000
B/519/3
B/525/31
BS 5642-2:1983
Sills and copings. Specification for copings of
precast concrete, cast stone, clayware, slate and
natural stone
B/519/3
BS 6381:1983
BS 5950-4:1994
TDW/4
B/525/4
Help Us to Help
You!
Always quote your
Customer Number
Dont know your
number?
Contact
Customer Services
020 8996 9001
BS 5950-6:1995
ISE/NFE/5
BS 6643-1:1985
BS 5950-8:2003
FSH/2
B/525/31
BS 6643-2:1985
Structural use of steelwork in building. Code of
practice for stressed skin design
B/525/31
FSH/2
BS 5950-9:1994
who will be happy to check it for you
BS 6404-20:1996
27
BS 7188:1998+A2:2009
BS 7805-2:1997
CH/216
SW/65
BS 6785:1986
BS 7371-2:1993
RHE/25
FME/9/1
BS 6788-2:1990
BS 7371-4:1994
BS 6806:2002
Textiles. Determination of formaldehyde.
Method for the determination of total and free
(water extraction method) formaldehyde using
chromotropic acid
TCI/80
BS 6999:1989
BS 7371-6:1998
BS 7899-1:1997
FME/9/1
FSH/16
BS 7371-8:1998
Coatings on metal fasteners. Specification for
sherardized coatings
BS 7371-9:1996
FME/9/1
BS 7014:1989
B/506
BS 7036-1:1996
BS 7856:1996
FME/9/1
FME/9/1
IDT/2
BS 7855-1:1996
BS 7371-10:1994
Coatings on metal fasteners. Specification for
organic coatings
FME/9/1
BS 7899-2:1999
Code of practice for assessment of hazard to
life and health from fire. Guidance on methods
for the quantification of hazards to life and
health and estimation of time to incapacitation
and death in fires
FSH/16
BS 7935-1:2004
Constant amplitude dynamic force calibration.
Calibration and verification of non-resonant
uniaxial dynamic testing systems. Method
ISE/NFE/4/6
BS 7935-2:2004
IDT/2
ISE/NFE/4/6
BS 7647:1993
BS 7956:2000
BS 7581:1992
BS 7036-2:1996
Code of practice for safety at powered doors
for pedestrian use. Straight and curved sliding
doors and prismatic and folding doors
MHE/31
STI/28
PEL/13
BS 7971-5:2004
BS 7036-3:1996
Code of practice for safety at powered doors
for pedestrian use. Swing doors and balanced
doors
MHE/31
BS 7668:2004
Weldable structural steels. Hot finished
structural hollow sections in weather resistant
steels. Specification
ISE/12
BS 7971-10:2004
BS 7036-4:1996
BS 7697:1993
MHE/31
GEL/8
BS 7036-5:1996
BS 7801:2004
MHE/31
BS 8000-2.2:1990
Workmanship on building sites. Code of
practice for concrete work. Sitework with in situ
and precast concrete
B/525/2
MHE/4
BS 7172:1989
BS 8008:1996+A1:2008
BS 7805-1:1995
Swaged collar grooved rivets. Specification for
sizes up to and including 10 mm diameter
TDW/4
FME/9/3
B/526
28
BS 8204-2:2003+A1:2009
BS EN 14662-4:2005
PD 0017:2001
B/507/6
IDT/2
EH/2/3
PD 0018:2001
BS 8204-3:2004+A1:2009
Screeds, bases and in situ floorings. Polymer
modified cementitious levelling screeds and
wearing screeds. Code of practice
B/507/6
BS EN 14662-5:2005
Ambient air quality. Standard method for
measurement of benzene concentrations.
Diffusive sampling followed by solvent
desorption and gas chromatography
BS 8204-4:2004
B/507/6
BS EN ISO 16000-9:2006
B/507/6
IDT/1
EH/2/3
BS EN ISO 16000-10:2006
Indoor air. Determination of the emission of
volatile organic compounds from building
products and furnishing. Emission test cell
method
EH/2/3
B/504
PD 0028:2002
IST/15
PD 6433:1969
BS 8427:2004
Jug water filter systems. Specification
Test target for assessing output quality of blackand-white document scanners in accordance
with BS ISO 12653
BS 8204-5:2004
Screeds, bases and in situ floorings. Mastic
asphalt underlays and wearing surfaces. Code
of practice
ICT/-
PD 0023:2001
EH/2/3
BS EN ISO 16000-11:2006
PVE/1
EH/2/3
PVE/1
PH/3/3
MTE/18
PD 6461-4:2004
BS 8428:2004
BS 5252F:1976
Colour matching fan
STI/14
DD 180:1989
Guide for the assessment of toxic hazards in fire
in buildings and transport
BS ISO 5468:2006
BS ISO 17560:2002
SS/6
CII/60
PD 6503-2:1988
BS ISO 20341:2003
FSH/16
BS EN 14662-1:2005
CII/60
PD CLC/TR 50373:2004
EH/2/3
PD 6439:1969
FSH/16
PD 6631:1998
PD CLC/TR 50422:2003
BS EN 14662-2:2005
Ambient air quality. Standard method for
measurement of benzene concentrations.
Pumped sampling followed by solvent
desorption and gas chromatography
EH/2/3
BS EN 14662-3:2005
Ambient air quality. Standard method for
measurement of benzene concentrations.
Automated pumped sampling with in situ gas
chromatography
EH/2/3
PD 6777:2003
GEL/8
IST/37
PD 0006:1995
Technical guide to JPEG. Digital compression of
photographic images
PD 7500:2003
Knowledge management. Vocabulary
IST/37
KMS/1
PD 0016:2001
PD 7501:2003
ICT/-
KMS/1
29
BS 1974:1953
BS 5685-5:1987
KMS/1
FME/9/3
PD 7503:2003
Introduction to knowledge management in
construction
KMS/1
BS 3129:1959
Specification for latex foam rubber components
for furniture
PRI/71
PD 8010-1:2004
Code of practice for pipelines. Steel pipelines
on land
PSE/17/2
PD 8010-2:2004
PSE/17/2
BS 3810-1:1964
Glossary of terms used in materials handling.
Terms used in connection with pallets, stillages,
hand and powered trucks
MHE/7
CP 2010-2:1970
Code of practice for pipelines. Design and
construction of steel pipelines in land
PSE/17
BS 5685-8:1991
Electricity meters. Specification for impulse
operated multiple registers for use with
induction electricity meters
PEL/13
BS 3575:1963
BS AU 170:1979
PEL/13
BS 7114-1:1988
Fireworks. Classification of fireworks
CII/47
BS 7114-2:1988
Fireworks. Specification for fireworks
CII/47
CP 2012-1:1974
Code of practice for foundations for machinery.
Foundations for reciprocating machines
B/526
BRITISH STANDARDS
DECLARED OBSOLESCENT
Declaration of obsolescence indicates that
the standard is not recommended for use
in new equipment but needs to be
retained for the servicing of existing
equipment that is expected to have a
long working life.
BS 3810-4:1968
Glossary of terms used in materials handling.
Terms used in connection with cranes
MHE/3/1
BS 4620:1970
BS 7114-3:1988
FME/9/3
BS 4672-1:1971
BS 275:1927
Specification for dimensions of rivets (12 inch to
134 inch diameter)
FME/9/3
CII/47
BS 7208-2:1991
BS 4672-2:1971
BS 641:1951
PKW/0
BS 7332:1990
BS 1109:1943
BS 5276-4:1977
PRI/76
FME/9/3
PVE/1
30
BS 7881:1997
BS L 170:1989
MCE/21/6
ACE/61/-/24
BS 5X 17:1998
Specification for oleoresinous varnish for
aerospace purposes
BS 9000-1:1989
ACE/65/-/3
EPL/40X
BS 9000-5:1989
General requirements for a system for
electronic components of assessed quality.
Specification of qualification approval and
conformance testing procedures
EPL/40X
BS HC 401:1974
Specification for 18% nickel maraging steel
precision castings (1600-1850 MPa)
BS 4899-2:1992
Guide to users requirements for technical
manuals (based on the principles of BS 4884).
Presentation
BS SP 57 and 58:1955
Specifications for rivet burrs for aircraft
ACE/12
IDT/2
PVE/1
BRITISH STANDARDS
WITHDRAWN
If any standard in this list has been
amended since publication, all
amendments published to date are also
withdrawn
BS 3015:1991
CP 143-1:1958
PD 6510:1983
DS/1
ACE/61/-/15
DS/1
BS 9000-7:1989
PD 6505:1982
BS 4899-1:1991
EPL/40X
ACE/61/-/15
EPL/40X
BS HC 402:1977
BS 9000-6:1989
BRITISH STANDARDS
PROPOSED FOR
WITHDRAWAL
BS 3483-B3:1982
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
BS 4361-0:1990
Woodworking machines. Classification of
woodworking machines and auxiliary machines
used for woodworking
MTE/23
31
BS 7854-4:1998
DD CEN/TS 15749:2008
MTE/23
CII/37
Superseded by BS EN 15749:2009
GME/21/5
BS EN 20287:1994
BS 8409:2002
PAI/11
BS 4361-39:1990
SW/65
BS EN 23907:1993
MTE/23
BS EN 1176-1:1998
Playground equipment. General safety
requirements and test methods
SW/65
Superseded by BS EN 1176-1:2008
BS 4585-1:1983
Methods of test for spices and condiments.
Determination of extraneous matter
AW/7
BS EN 29117:1992
BS EN 1176-2:1998
Playground equipment. Additional specific
safety requirements and test methods for
swings
SW/65
BS 6127-2:1982
Superseded by BS EN 1176-2:2008
BS EN 1176-3:1998
BS CECC 41000:1977
Playground equipment. Additional specific
safety requirements and test methods for slides
SW/65
EPL/40X
Superseded by BS EN 1176-3:2008
Superseded by BS EN 60393-1:2009
BS EN 1176-4:1998
BS ISO 2470:1999
Paper, board and pulps. Measurement of diffuse
blue reflectance factor (ISO brightness)
PTI/16
I/-
SW/65
PTI/15
BS 6127-3:1995
Petrographic analysis of bituminous coal and
anthracite. Method of determining maceral
group composition of bituminous coal and
anthracite
Superseded by BS EN 1176-4:2008
BS ISO 4918:2009
BS 6127-5:1995
Petrographic analysis of bituminous coal and
anthracite. Method of determining
microscopically the reflectance of vitrinite
BS EN 1176-5:1999
PTI/16
SW/65
Superseded by BS EN 1176-5:2008
BS 6290-4:1997
Lead-acid stationary cells and batteries.
Specification for classifying valve regulated
types
PEL/21
BS EN 1176-6:1998
Playground equipment. Additional specific
safety requirements and test methods for
rocking equipment
SW/65
BS 6955-11:1994
BS EN 1176-7:1997
GME/21/2
SW/65
Superseded by BS EN 1176-7:2008
BS 7545:1991
DD ENV 14232:2003
ISE/NFE/8
RPI/13
Superseded by BS EN 14232:2009
32
Help Us to Help
You!
Superseded by BS EN 1176-6:2008
BS 6049-2:1981
(ISO 1573:1980)
BS 6068-2.49:1995
(ISO 10566:1994)
AW/8
EH/3/2
BS 6049-4:1988
(ISO 1575:1987)
BS 3680-8H:1996
(ISO 11655:1995)
BS 6049-6:1988
(ISO 1577:1987)
AW/8
BS 6325:1982
(ISO 6078:1982)
Glossary of terms relating to black tea
AW/8
BS 6049-5:1989
(ISO 1576:1988)
Methods of test for tea. Determination of
water-soluble ash and water-insoluble ash
AW/8
BS 6362:1990
(ISO 7598:1988)
Specification for stainless steel tubes suitable
for screwing in accordance with BS 21 Pipe
threads for tubes and fittings where pressuretight joints are made on the threads
ISE/8
AW/8
CPI/113/5
BS 3900-F15:1995
(ISO 11503:1995)
Methods of test for paints. Determination of
resistance to humidity (intermittent
condensation)
STI/10
BS 6590:1985
(ISO 6898:1984)
BS 6049-7:1981
(ISO 1578:1975)
Methods of test for tea. Determination of
alkalinity of water-soluble ash
AW/8
BS 6068-1.4:1993
(ISO 6107-4:1993)
MTE/1
BS 6986-2:1988
(ISO 6770:1982)
Analysis of instant tea. Methods for
determination of free-flow and compacted bulk
densities
AW/8
BS 4499:1984
(ISO 692:1982)
Method for determination of alkali solubility of
pulp
I/-
BS 4656-34:1985
(ISO 6899:1984)
Accuracy of machine tools and methods of test.
Specification for power presses, mechanical
open front type
MTE/1
BS 4747-2:1995
(ISO 801-2:1994)
Methods for determination of saleable mass, in
lots, of pulp. Pulps (such as flash-dried pulps)
baled in slabs
EH/3
BS 7030:1988
(ISO 7991:1987)
BS 6068-2.31:1987
(ISO 6333:1986)
BS 6068-2.37:1990
(ISO 9297:1989)
Water quality. Physical, chemical and
biochemical methods. Method for the
determination of chloride via a silver nitrate
titration with chromate indicator (Mohrs
method)
EH/3/2
LBI/36
BS 7034-2:1988
(ISO 7884-2:1987)
Viscosity and viscometric fixed points of glass.
Method for the determination of viscosity by
rotation viscometers
LBI/36
BS 7034-3:1988
(ISO 7884-3:1987)
Viscosity and viscometric fixed points of glass.
Method for the determination of viscosity by
fibre elongation viscometer
LBI/36
I/-
BS 6068-2.47:1995
(ISO 11083:1994)
BS 5898:1980
(ISO 384:1978)
Specification for principles of design and
construction of volumetric glassware for
laboratory use
BS 6068-2.48:1995
(ISO 10359-2:1994)
AW/8
EH/3/2
LBI/36
BS 6049-1:1981
(ISO 1572:1980)
BS 7034-4:1988
(ISO 7884-4:1987)
BS 7034-5:1988
(ISO 7884-5:1987)
Viscosity and viscometric fixed points of glass.
Method for the determination of working point
by sinking bar viscometer
LBI/36
33
BS 7709-6:1993
(ISO 10136-6:1993)
LBI/36
LBI/36
BS EN ISO 2812-3:2007
Paints and varnishes. Determination of
resistance to liquids. Method using an
absorbent medium
STI/10
BS EN ISO 2812-4:2007
BS 7034-7:1988
(ISO 7884-7:1987)
Viscosity and viscometric fixed points of glass.
Method for the determination of annealing
point and strain point by beam bending
LBI/36
BS 7034-8:1988
(ISO 7884-8:1987)
DD 234:1996
(ISO/TR 11211:1995)
Grading polished diamonds. Terminology and
classification
STI/53
BS EN ISO 2812-5:2007
BS EN ISO 140-18:2006
STI/10
EH/1/6
BS 7463-6:1995
(ISO 9184-6:1994)
BS EN ISO 801-1:1997
BS EN ISO 3059:2001
WEE/46
BS EN ISO 3166-1:2006
I/-
BS 7463-7:1995
(ISO 9184-7:1994)
Fibre furnish analysis of paper, board and pulps.
Determination of weight factors
BS EN ISO 801-3:1997
Pulps. Determination of saleable mass in lots.
Unitized bales
I/-
I/-
BS 7709-1:1993
(ISO 10136-1:1993)
Analysis of extract solutions of glass. Method
for determination of silicon dioxide by
molecular absorption spectrometry
STI/10
BS EN ISO 1524:2002
(BS 3900-C6:2000)
Paints, varnishes and printing inks.
Determination of fineness of grind
STI/10
BS EN ISO 3822-1:1999+A1:2008
Acoustics. Laboratory tests on noise emission
from appliances and equipment used in water
supply installations. Method of measurement
EH/1/6
LBI/36
BS 7709-2:1993
(ISO 10136-2:1993)
BS EN ISO 3678:1995
(BS 3900-C8:1978)
BS EN ISO 2692:2006
Geometrical product specifications (GPS).
Geometrical tolerancing. Maximum material
requirement (MMR), least material requirement
(LMR) and reciprocity requirement (RPR)
BS EN ISO 4623-1:2002
(BS 3900-F13:2002)
Paints and varnishes. Determination of
resistance to filiform corrosion. Steel substrates
TDW/4
STI/10
BS EN ISO 2806:1997
BS EN ISO 5267-1:2001
AMT/4
PAI/11
LBI/36
BS 7709-3:1993
(ISO 10136-3:1993)
Analysis of extract solutions of glass. Method
for determination of calcium oxide and
magnesium oxide by flame atomic absorption
spectrometry
LBI/36
BS EN ISO 2808:2007
(BS 3900-C5:2007)
Paints and varnishes. Determination of film
thickness
BS 7709-4:1993
(ISO 10136-4:1993)
STI/10
BS EN ISO 2812-1:2007
LBI/36
BS 7709-5:1993
(ISO 10136-5:1993)
Analysis of extract solutions of glass. Method
for determination of iron (III) oxide by
molecular absorption spectrometry and flame
atomic absorption spectrometry
LBI/36
34
BS EN ISO 5455:1995
(BS 308-1.4:1995)
Technical drawings. Scales
TDW/4
BS EN ISO 5667-1:2006
(BS 6068-6.1:2006)
Water quality. Sampling. Guidance on the
design of sampling programmes and sampling
techniques
EH/3/6
BS EN ISO 2812-2:2007
BS EN ISO 5961:1995
(BS 6068-2.21:1995)
STI/10
EH/3/2
BS EN ISO 6222:1999
(BS 6068-4.5:1999)
BS EN ISO 9963-1:1996
(BS 6068-2.51:1996)
BS EN ISO 11997-2:2006
(BS 3900-F19:2006)
EH/3/2
EH/3/4
BS EN ISO 7027:2000
(BS 6068-2.13:2000)
Water quality. Determination of turbidity
EH/3/2
STI/10
BS EN ISO 9963-2:1996
(BS 6068-2.52:1996)
Water quality. Determination of alkalinity.
Determination of carbonate alkalinity
ISE/NFE/4/1
BS EN ISO 7784-3:2006
(BS 3900-E16:2000)
Paints and varnishes. Determination of
resistance to abrasion. Reciprocating test panel
method
STI/10
BS EN ISO 7980:2000
(BS 6068-2.30:1987)
Water quality. Determination of calcium and
magnesium. Atomic absorption spectrometric
method
BS EN ISO 10438-1:2007
Petroleum, petrochemical and natural gas
industries. Lubrication, shaft-sealing and
control-oil systems and auxiliaries. General
requirements
PSE/17/-/6
PSE/17/-/6
STI/27
BS EN ISO 8501-1:2007
BS EN ISO 13703:2000
Petroleum and natural gas industries. Design
and installation of piping systems on offshore
production platforms
PSE/17/-/6
PSE/17
BS EN ISO 10441:2007
BS EN ISO 13704:2007
PSE/17/-/6
BS EN ISO 13716:2000
BS EN ISO 11091:1999
STI/21
BS EN ISO 8504-2:2001
(BS 7079-D2:2000)
B/555
BS EN ISO 13503-4:2006
PSE/17/-/3
BS EN ISO 10438-4:2007
BS EN ISO 9706:2000
BS EN ISO 10438-3:2007
ISE/NFE/8
STI/21
BS EN ISO 12213-3:2009
BS EN ISO 12944-5:2007
PSE/17/-/6
PTI/15
PTI/15
BS EN ISO 8044:2000
BS EN ISO 8504-1:2001
(BS 7079-D1:2000)
BS EN ISO 12213-2:2009
BS EN ISO 10438-2:2007
STI/21
PTI/15
EH/3/2
EH/3/2
BS EN ISO 7500-2:2006
Metallic materials. Verification of static uniaxial
testing machines. Tension creep testing
machines. Verification of the applied force
BS EN ISO 12213-1:2009
BS EN ISO 11126-10:2004
(BS 7079-F10:2004)
Preparation of steel substrates before
application of paints and related products.
Specifications for non-metallic blast-cleaning
abrasives. Almandite garnet
STI/21
BS EN ISO 13803:2004
(BS 3900-D13:2000)
Paints and varnishes. Determination of
reflection haze on paint films at 20 degrees
STI/10
BS EN ISO 13849-1:2008
Safety of machinery. Safety-related parts of
control systems. General principles for design
MCE/3
I/-
BS EN ISO 11507:2007
(BS 3900-F16:2007)
BS EN ISO 9934-1:2001
BS EN ISO 13850:2008
STI/10
MCE/3
35
BS EN ISO 15181-1:2007
BS EN ISO 15792-3:2008
PSE/17
STI/10
BS EN ISO 14270:2001
Specimen dimensions and procedure for
mechanized peel testing resistance spot, seam
and embossed projection welds
WEE/2
BS EN ISO 15181-2:2007
Paints and varnishes. Determination of release
rate of biocides from antifouling paints.
Determination of copper-ion concentration in
the extract and calculation of the release rate
BS EN ISO 15841:2006
Dentistry. Wires for use in orthodontics
CH/106/1
STI/10
BS EN ISO 16266:2008
BS EN ISO 14272:2001
Specimen dimensions and procedure for cross
tension testing resistance spot and embossed
projection welds
WEE/2
BS EN ISO 14273:2001
Specimen dimensions and procedure for shear
testing resistance spot, seam and embossed
projection welds
BS EN ISO 15181-3:2007
(BS 3900-K3:2007)
Paints and varnishes. Determination of release
rate of biocides from antifouling paints.
Calculation of the zinc ethylene-bis
(dithiocarbamate)(zineb) release rate by
determination of the concentration of
ethylenethiourea in the extract
STI/10
WEE/2
BS EN ISO 14402:1999
(BS 6068-2.68:1999)
Water quality. Determination of phenol index
by flow analysis (FIA and CFA)
BS EN ISO 15318:2000
BS EN ISO 14680-1:2006
(BS 3900-A26:2006)
STI/10
BS EN ISO 14680-3:2006
(BS 3900-A28:2000)
BS EN ISO 15535:2006
General requirements for establishing
anthropometric databases
PH/9/4
STI/27
BS EN ISO 16773-1:2007
BS EN ISO 15528:2000
BS EN ISO 14680-2:2006
(BS 3900-A27:2006)
PTI/15
PH/9/1
STI/10
BS EN ISO 16276-1:2007
BS EN ISO 16276-2:2007
I/-
BS EN ISO 15403-1:2008
Ergonomics of the thermal environment.
Evaluation of thermal environments in vehicles.
Determination of equivalent temperature
EH/3/4
EH/3/2
BS EN ISO 14505-2:2006
BS EN ISO 16773-2:2007
Paints and varnishes. Electrochemical
impedance spectroscopy (EIS) on highimpedance coated specimens. Collection of data
STI/10
DD CEN/TS 15674:2007
Air quality. Measurement of stationary source
emissions. Guidelines for the elaboration of
standardised methods
BS EN ISO 17132:2007
Paints and varnishes. T-bend test
EH/2/1
STI/10
STI/10
DD CEN/TS 15675:2007
BS EN ISO 17776:2002
BS EN ISO 14731:2006
EH/2/1
PSE/17
WEE/36
BS EN 14884:2005
Air quality. Stationary source emissions.
Determination of total mercury: automated
measuring systems
EH/2/1
BS EN ISO 15792-1:2008
Welding consumables. Test methods. Test
methods for all-weld metal test specimens in
steel, nickel and nickel alloys
WEE/39
BS EN ISO 17872:2007
Paints and varnishes. Guidelines for the
introduction of scribe marks through coatings
on metallic panels for corrosion testing
STI/10
BS EN ISO 15138:2007
BS EN ISO 15792-2:2008
BS EN ISO 19903:2006
PSE/17/-/6
WEE/39
B/525/12
36
BS EN ISO 19904-1:2006
BS ISO 128-23:1999
BS ISO 8820-6:2007
B/555
B/525/12
BS ISO 8820-7:2007
BS ISO 230-7:2006
BS EN ISO 20776-1:2006
Clinical laboratory testing and in vitro
diagnostic test systems. Susceptibility testing of
infectious agents and evaluation of
performance of antimicrobial susceptibility test
devices. Reference method for testing the in
vitro activity of antimicrobial agents against
rapidly growing aerobic bacteria involved in
infectious diseases
CH/212
MTE/1
BS ISO 3688:1999
Pulps. Preparation of laboratory sheets for the
measurement of diffuse blue reflectance factor
(ISO brightness)
BS ISO/IEC 9281-1:1990
Information technology. Picture coding
methods. Identification
IST/37
I/-
BS ISO/IEC 9281-2:1990
BS EN ISO 21227-3:2007
BS ISO 4190-5:2006
BS ISO 10303-11:1994
Reaction to fire tests. Spread of flame.
Guidance on flame spread
FSH/21
AMT/4
BS ISO 6107-2:2006
(BS 6068-1.2:2006)
BS ISO 10716:1994
DD ISO/TS 5658-1:2006
IST/37
MHE/4
STI/10
BS EN ISO 21427-2:2009
(BS 6068-5.45:2006)
EH/3
I/-
BS ISO 6107-3:1993
(BS 6068-1.3:1993)
BS ISO 10754:1996
WEE/39
EH/3/5
BS EN ISO 21952:2007
EH/3
BS EN ISO 22032:2009
(BS 6068-2.99:2006)
Water quality. Determination of selected
polybrominated diphenyl ethers in sediment
and sewage sludge. Method using extraction
and gas chromatography/mass spectrometry
BS ISO 6107-8:1993
(BS 6068-1.8:1993)
Water quality. Vocabulary. Part 8
EH/3
BS ISO 11056:1999
Sensory analysis. Methodology. Magnitude
estimation method
AW/12
EH/3/2
BS ISO 7176-1:1999
Wheelchairs. Determination of static stability
BS EN ISO 22674:2006
BS ISO 7176-8:1998
PAI/11
BS ISO 11093-9:2006
CH/173/1
BS EN ISO 24598:2007
Welding consumables. Solid wire electrodes,
tubular cored electrodes and electrode/flux
combinations for submerged arc welding of
creep-resisting steels. Classification
CH/173/1
BS ISO 7637-3:2007
BS ISO 11108:1996
Information and documentation. Archival
paper. Requirements for permanence and
durability
I/-
BS EN 29052-1:1992
(ISO 9052-1:1989)
AUE/16
BS ISO 8587:2006
AUE/16
EH/1
AW/12
BS ISO 128-22:1999
BS ISO 8820-5:2007
TDW/4
AUE/16
AUE/16
WEE/39
BS ISO 11451-3:2007
BS ISO 11452-8:2007
37
DD ISO/TS 16610-20:2006
BS ISO 22472:2006
TDW/4
EH/2/1
EPL/80
DD ISO/TS 16610-22:2006
BS ISO 11632:1998
Stationary source emissions. Determination of
mass concentration of sulfur dioxide. Ion
chromatography method
BS ISO 23874:2006
Natural gas. Gas chromatographic requirements
for hydrocarbon dewpoint calculation
PTI/15
EH/2/1
DD ISO/TS 16610-29:2006
BS ISO 11898-5:2007
Road vehicles. Controller area network (CAN).
High-speed medium access unit with low-power
mode
AUE/16
DD ISO/TS 16610-40:2006
BS ISO 13041-5:2006
BS ISO 24497-1:2007
TDW/4
BS ISO 24497-2:2007
Non-destructive testing. Metal magnetic
memory. General requirements
WEE/46
MTE/1
DD ISO/TS 16610-41:2006
BS ISO 24497-3:2007
BS ISO 13322-2:2006
WEE/46
DD ISO/TS 16610-49:2006
DD ISO/TS 24817:2006
LBI/37
BS ISO 13542:2006
Paper and board. Specification for internal
diameters of cores for reels
TDW/4
PSE/17/-/6
PAI/11
BS ISO 16750-3:2007
BS ISO 13985:2006
Liquid hydrogen. Land vehicle fuel tanks
PVE/3/8
BS ISO/IEC TR 14759:1999
Software engineering. Mock up and prototype.
A categorization of software mock up and
prototype models and their use
IST/15
BS ISO 15553:2006
Water quality. Isolation and identification of
Cryptosporidium oocysts and Giardia cysts from
water
BS ISO 16792:2006
Technical product documentation. Digital
product definition data practices
TDW/4
BS ISO 19072-1:2007
Road vehicles. Connection interface for
pyrotechnic devices, two-way and three-way
connections. Pocket interface definition
CH/100
BS AU 50-1.6.3a:1995
(ISO 6054-1:1994)
Tyres and wheels. Tyres. Motorcycle tyres.
Specifications for designations, dimensions and
load ratings for code designated series
(diameter codes 4 to 12) tyres
AUE/4
BS AU 50-4.6.3:1991
(ISO 6054-2:1990)
BS ISO 19072-2:2007
AUE/4
AUE/16
BS AU 206-2:1986
(ISO 7639:1985)
BS ISO 20282-1:2006
LBI/37
BS ISO 16212:2008
AUE/16
EH/3/4
BS ISO 15901-2:2006
BS ISO 28077:2006
CW/217
PH/9
DD ISO/TS 16610-1:2006
BS ISO 21849:2006
BS AU 233:1989
(ISO 9458:1988)
TDW/4
ACE/1
AUE/16
38
AUE/16
BS 434-1 (Revision)
Bitumen road emulsions (anionic and cationic).
Specification for bitumen road emulsions
will supersede BS 434-1:1984
B/510/19
BS EN 30-1-3 (Revision)
BS EN 13282-3
B/516/14
BS EN 13624 (Revision)
GSE/35
CH/216
BS EN 30-1-4 (Revision)
BS EN 545 (Revision)
Ductile iron pipes, fittings, accessories and their
joints for water pipelines. Requirements and
test methods
will supersede BS EN 545:2006
BS 1134 (Revision)
PD CEN/TR 13910
Packaging. Report on criteria and
methodologies for life cycle analysis of
packaging
PKW/0/-/1
PSE/10
BS EN 14143 (Revision)
BS EN ISO 734-2 (Revision)
BS 2634-1 (Revision)
PH/4/7
BS EN 14362-1 (Revision)
TDW/4
NFE/34/3
BS EN 1254-6
TCI/80
BS 2634-2 (Revision)
BS EN 1254-8
BS EN 14778-1 (Revision)
NFE/34/3
BS 5837 (Revision)
Trees in relation to construction.
Recommendations
BS EN 14780 (Revision)
TCI/69
PTI/17
BS EN 14974:2006/Amendment 1
BS 6180 (Revision)
Barriers in and about buildings. Code of
practice
will supersede BS 6180:1999
AW/307
B/208
Camping tents
will supersede BS EN ISO 5912:2005
BS EN 12620 (Revision)
Sustainable facility management briefing
FMW/1
TCI/74
B/515
BS 8536
SW/136
B/502
PTI/17
BS EN 13041 (Revision)
BS EN 30-1-2 (Revision)
GSE/35
AW/20
PTI/17
39
BS EN 16058
BS EN 61124 (Revision)
PTI/17
EH/6
BS EN 15411 (Revision)
Solid recovered fuels. Methods for the
determination of the content of trace elements
(As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb,
Sb, Se, Tl, V and Zn)
will supersede DD CEN/TS 15411:2006
PTI/17
BS EN 15413 (Revision)
Solid recovered fuels. Methods for the
preparation of the test sample from the
laboratory sample
will supersede DD CEN/TS 15413:2006
PTI/17
DD CEN/TS 15480-3
IST/36
AW/307
BS EN 60061-1:1997/Amendment 45
Specification for lamp caps and holders
together with gauges for the control of
interchangeability and safety. Lamps caps
BS EN 60061-2:1997/Amendment 42
CPL/34/2
BS EN 16051-2
Inflation devices and accessories for inflatable
consumer products. Safety requirements,
durability, performance, compatibility and test
methods of inflators
BS EN 61850-4 (Revision)
IST/17
BS EN 16051-1
BS EN 61300-2-10 (Revision)
Fibre optic interconnecting devices and passive
components. Basic test and measurement
procedures. Tests. Crush resistance
CPL/34/2
PTI/17
DS/1
BS EN 60061-3:1997/Amendment 43
BS EN 61850-7-410 (Revision)
Communication networks and systems for
power utility automation. Hydroelectric power
plants. Communication for monitoring and
control
will supersede BS EN 61850-7-410:2007
PEL/57
BS EN 61987-11
Industrial-process measurement and control.
Data structures and elements in process
equipment catalogues. List of Properties (LOP)
of measuring equipment for electronic data
exchange. Generic structures
AMT/7
CPL/34/2
BS EN 61988-4-2
BS EN 60296 (Revision)
Fluids for electrotechnical applications. Unused
mineral insulating oils for transformers and
switchgear
will supersede BS EN 60296:2004
GEL/10
BS EN 62271-4
High-voltage switchgear and controlgear. Use
and handling of sulphur hexafluoride (SF6)
BS EN 60350 (Revision)
PEL/17/1
SW/136
BS EN 62287-1 (Revision)
BS EN 16054
CPL/59
GME/25
BS EN 60475
BS EN 16055
EPL/80
GEL/10
TCI/69
BS EN 60567 (Revision)
BS EN 16056
BS EN 62341-5-2
Organic Light Emitting Diode (OLED) displays.
Mechanical endurance test methods
EPL/47
EH/6
BS EN 60704-2-14
BS EN 62343
Dynamic modules and devices. General and
guidance
GEL/86/3
CPL/59/13
EPL/47
BS EN 16057
40
BS EN 62629
Measuring methods for 3D displays
BS EN 62642-2-2
BS ISO 2782-2
PD ISO/TR 7074
PRI/22
PRI/88/1
BS ISO 2951
BS ISO 7752-2
GW/1
BS EN 62642-3
Alarm systems. Intrusion and hold-up systems.
Control and indicating equipment
GW/1
PRI/22
MHE/3/5
BS EN 62642-4
Alarm systems. Intrusion and hold-up systems.
Warning devices
GW/1
BS EN 62642-5-3
Alarm systems. Intrusion and hold-up systems.
Requirements for interconnections equipment
using radio frequency techniques
GW/1
PD ISO/TR 230-8:2009/Amendment 1
Test code for machine tools. Determination of
vibration levels
BS ISO 3387
Rubber. Determination of crystallization effects
by hardness measurements
PRI/22
BS ISO 4652
Rubber compounding ingredients. Carbon
black. Determination of specific surface area by
nitrogen adsorption methods. Single-point
procedures
will partially supersede BS 5293-11:1995
PRI/23
MTE/1/2
BS ISO 5636-3
Microstructure of cast irons. Graphite
classification by image analysis
PRI/23
PRI/22
PD ISO/TR 945-2
BS ISO 8784-2
ISE/35
PAI/11
PRI/26
BS ISO 5660-3
FSH/21/5
PRI/21
BS ISO 5660-5
BS ISO 1431-1 (Revision)
Rubber, vulcanized or thermoplastic. Resistance
to ozone cracking. Static and dynamic strain
testing
FSH/21
BS ISO 10303-239
Industrial automation systems and integration.
Product data representation and exchange.
Application protocol. Product lifecycle support
AMT/4
PRI/22
BS ISO 10360-8
Geometrical Product Specifications (GPS).
Acceptance and reverification tests for
coordinate measuring machines (CMM). CMMs
with optical distance sensors
TDW/4
PRI/22
BS ISO 10360-9
Geometrical Product Specifications (GPS).
Acceptance and reverification tests for
coordinate measuring machines (CMM). CMMs
with multiple probing systems
TDW/4
PRI/23
BS ISO 10502
PRI/66
ACE/69
41
BS ISO 13209-3
BS ISO 13742
AUE/16
SME/32/-/4
BS ISO 13400-1
Road vehicles. Diagnostic communication
between test equipment and vehicle over
internet protocol. General information and usecase definition
BS ISO 13400-3
Road vehicles. Diagnostic communication
between test equipment and vehicle over
internet protocol. IEEE 802.3 based wired
vehicle interface
AUE/16
BS ISO/IEC 12785-2
Information technology for learning, education,
and training. Content packaging. XML binding
IST/43
BS ISO/IEC 12785-3
Information technology for learning, education,
and training. Content packaging. Best practice
and implementation guide
IST/43
BS ISO 13795
SME/32/-/4
BS ISO 13797
AMT/4
BS ISO 13507
Rubber compounds. Short names for properties
reported in certificates of analysis
PRI/10
BS ISO 13798
BS ISO 13613
Ships and marine technology. Critical systems
for propulsion and manueverability.
Maintenance and testing guidelines
BS ISO 13713
Ships and marine technology. Ships mooring
and towing fittings. Mooring chocks
BS ISO 13799
Ships and marine technology. Ships mooring
and towing fittings. Recessed bitts (casting
type)
SME/32/-/4
SME/32/-/4
DD ISO/TS 14198
Ships and marine technology. Ships mooring
and towing fittings. Panama chocks
SME/32/-/4
BS ISO 13729
Workplace atmospheres. Personal sampling
pumps. Requirements and test methods
BS ISO 13482
PVE/3/7
BS ISO 13137
BS ISO 13784-1
BS ISO 13728
BS ISO 13088
SME/32/-/4
PSE/10
SME/32/-/3
SME/32/-/2
BS ISO 13776
FSH/21
BS ISO 13073-1
Ships and marine technology. Risk assessment
on anti-fouling systems on ships. Marine
environmental risk assessment method on
active substances used for anti-fouling systems
on ships
SME/32/-/4
BS ISO 13470
Trenchless applications of ductile iron pipes
systems
BS ISO 12122
SME/32/-/4
BS ISO 13767
BS ISO 13400-2
AUE/16
TCI/74
BS ISO 13755
BS ISO 14230-1
Road vehicles. Diagnostic systems. Keyword
protocol 2000. Physical layer
AUE/16
EH/2/2
BS ISO 13733
Ships and marine technology. Ships mooring
and towing fittings. Universal fairleads with
upper roller
BS ISO 14230-2
SME/32/-/4
AUE/16
BS ISO 13179-1
42
BS ISO 14285
BS ISO 14451-8
CH/205/3
AUE/7
BS ISO 14309
BS ISO 14451-9
PRI/22
BS ISO 14452
FSH/16
BS ISO 14451-1
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Terminology
SVS/7/4
BS ISO 14382
CPW/42
AUE/7
EH/3/5
BS ISO 14380
BS ISO 14451-10
BS ISO 14371
BS ISO 14477
BS ISO 19702
Toxicity testing of fire effluents. Guidance for
analysis of gases and vapours in fire effluents
using FTIR gas analysis
FSH/16
AW/307
BS ISO 14538
Road vehicles. Conditions for testing the
electrical and electronic equipments. Functional
performance status classification (FPSC)
GSE/40
DD ISO/TS 19713-1
Road vehicles. Inlet air cleaning equipment for
internal combustion engines and compressors.
Fractional efficiency testing with fine particles
(0, 3 m to 5 m optical diameter)
GSE/40
BS ISO 14934-3
Fire tests. Calibration and use of heat flux
meters. Secondary calibration method
DD ISO/TS 19713-2
AUE/7
FSH/21
BS ISO 14451-2
BS ISO 14990-1
GSE/40
BS ISO/IEC 19788-3
AUE/7
B/513/1
BS ISO 14451-3
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Labelling
AUE/7
PD ISO/TR 15144-1
Calculation of micro-pitting load capacity of
cylindrical spur and helical gears. Introduction
and basic principles
MCE/5/-/15
BS ISO 14451-4
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Requirements for micro gas generators
AUE/7
BS ISO 14451-5
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Requirements for airbag gas
generators
AUE/7
BS ISO 14451-6
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Requirements for airbag modules
AUE/7
CH/172/6
CPW/42
BS ISO 23274-2
Hybrid-electric road vehicles. Exhaust emissions
and fuel consumption measurements
GSE/40
PRI/88/2
BS ISO 25178-1
BS ISO 14451-7
Pyrotechnic articles. Pyrotechnic articles for
vehicles. Requirements for seatbelt
pretensioners
BS ISO 15928-5
Houses. Description of performance. Energy
efficiency
AUE/7
CB/500
TDW/4
43
BS 3A 110
09/30196573 DC
IST/33
ACE/12
B/542/6
BS ISO/IEC 27034-3
BS A260 to A265
09/30202852 DC
IST/33
ACE/12
BS ISO/IEC 27034-4
BS XXXX
NFE/34/3
09/30205734 DC
BS 5864 Installation and maintenance of gasfired ducted air heaters of rated heat input not
exceeding 70 kW net (2nd and 3rd family
gases). Specification
GSE/30/-/7
IST/33
PAS XX
BS ISO/IEC 27034-5
PAS XXX
IST/33
BS ISO 27145-5
Road vehicles. Implementation of WWH-OBD
communication. Conformance test
09/30214218 DC
PD 5500 AMD2 Specificartion for unfired
fusion welded pressure vessels
PAS XXXX
Guidance on biometrics
PVE/1
AUE/16
BS ISO 27145-6
Road vehicles. Implementation of WWH-OBD
communication. External test equipment
AUE/16
BS ISO 27871
Cheese and processed cheese. Determination of
nitrogen fractions
AW/5
BS ISO 28017
Rubber hoses and hose assemblies, wire or
textile reinforced, for dredging applications.
Specification
PRI/66
BS ISO 29904
Fire chemistry. Aerosols generation and
measurement in fire
FSH/16
PD IEC/TR 61000-1-6
Electromagnetic compatibility (EMC). General.
Guide to the assessment of measurement
uncertainty
GEL/210/12
DD IEC/TS 62657
Industrial communication networks. Wireless
communication network and communication
profiles. Coexistence
AMT/7
PD 0024 (Revision)
Archival documents. Guide to the interpretation
of BS 5454:2000. Storage and exhibition of
archival documents
09/30100834 DC
BS ISO/IEC 19788-1 Information technology.
Learning, education and training. Metadata for
learning resources. Part 1. Framework
IST/43
09/30150663 DC
BS ISO 22734-2 Hydrogen generators using
water electrolysis process. Part 2. Residential
applications
PVE/3/8
09/30154552 DC
09/30170006 DC
IDT/2/9
MS/2
PRI/88/4
44
09/30155614 DC
09/30180789 DC
09/30182882 DC
ISE/9/1
WEE/46
MCE/21
09/30155621 DC
BS ISO 15698-2 Steel for the reinforcement of
concrete. Headed bars. Part 2. Test methods
ISE/9/1
09/30180795 DC
BS EN 16016-2 Non destructive testing.
Radiation method. Computed tomography.
Part 2. Principle, equipment and samples
WEE/46
IDT/2/2
09/30166263 DC
BS IEC 60364-5-55 AMD3 Low-voltage
electrical installations. Part 5-55. Selection and
erection of electrical equipment. Other
equipment
JPEL/64
09/30165649 DC
BS ISO 25964-1 Information and
documentation. Thesauri and interoperability
with other vocabularies. Part 1. Thesauri for
information retrieval
18.00 members, 36.00 non-members
09/30185799 DC
09/30180799 DC
BS EN 16016-3 Non destructive testing.
Radiation method. Computed tomography.
Part 3. Operation and interpretation
09/30185894 DC
WEE/46
B/507
09/30180804 DC
09/30189435 DC
WEE/46
WEE/46
09/30181286 DC
09/30191421 DC
EPL/46/2
IST/17
09/30168805 DC
BS EN ISO 3107 Dentistry. Zinc oxide/eugenol
cements and zinc oxide/noneugenol cements
CH/106/1
09/30193524 DC
09/30182350 DC
BS EN 12757-1 AMD1 Mixing machinery for
coating materials. Safety requirements. Part 1.
Mixing machinery for use in vehicle refinishing
MCE/3/8
09/30170207 DC
BS ISO/IEC 24787 Information technology.
Identification cards. On-card biometric
comparison
IST/17
09/30170496 DC
BS EN 60601-2-45 Medical electrical
equipment. Part 2-45. Particular requirements
for basic safety and essential performance of
mammographic X-ray equipment and
mammographic stereotactic devices
CH/62/2
09/30182356 DC
BS EN 12581 AMD1 Coating plants. Machinery
for dip coating and electrodeposition of organic
liquid coating material. Safety requirements
MCE/3/8
09/30193710 DC
BS EN 16018 Non-destructive testing.
Terminology. Terms used in ultrasonic testing
with phased arrays
WEE/46
09/30182865 DC
BS ISO 29463-1 High-efficiency filters and filter
media for removing particles from air. Part 1.
Classification, performance testing and marking
MCE/21
09/30194820 DC
BS EN 60731 Medical electrical equipment.
Dosimeters with ionization chambers as used in
radiotherapy
CH/62/3
09/30173981 DC
BS EN 60662 High-pressure sodium vapour
lamps. Performance specifications
18.00 members, 36.00 non-members
CPL/34/1
09/30182868 DC
09/30195921 DC
MCE/21
EH/2/1
09/30182871 DC
09/30196316 DC
09/30179632 DC
BS EN ISO 12312-1 Eye and face protection.
Sunglasses and related eyewear. Part 1.
Sunglasses for general use
PH/2
MCE/21
NFE/35
09/30180290 DC
09/30182875 DC
09/30196319 DC
MCE/3/10
MCE/21
NFE/35
45
09/30197681 DC
09/30203792 DC
IST/35
PH/8/1
NFE/35
09/30201352 DC
09/30196325 DC
BS ISO 6361-4 Wrought aluminium and
aluminium alloys. Sheets, strips and plates.
Part 4. Sheets and plates. Tolerances on shape
and dimensions
NFE/35
09/30196463 DC
BS EN 61169-14 Radio-frequency connectors.
Part 14. R.F. coaxial connectors with inner
diameter of outer conductor 12 mm with screw
coupling. Characteristic impedance 75 ohms
(Type 3. 5/12)
EPL/46/2
09/30196808 DC
BS ISO 11806-1 Agricultural and forestry
machinery. Safety requirements and testing for
portable, hand-held, powered brush-cutters and
grass-trimmers. Part 1. Machines with integral
combustion engine
AGE/29
09/30196811 DC
09/30203860 DC
BS EN 14139 Ophthalmic optics. Specifications
for ready-to-wear spectacles
CH/172/3
GME/21
09/30201367 DC
BS ISO 5264-2 Pulps. Laboratory beating.
Part 2. PFI mill method
09/30204392 DC
BS ISO 12958 Geotextiles and geotextilerelated products. Determination of water flow
capacity in their plane
B/553
PAI/11
09/30202122 DC
09/30204691 DC
FSH/21
IST/15
09/30202130 DC
BS ISO 13059 Round timber. Requirements for
the measurement of dimensions and methods
for the determination of volume
09/30204817 DC
BS EN 1888 Child care articles. Wheeled child
conveyances. Safety requirements and test
methods
B/543
AGE/29
GW/1/12
09/30204931 DC
09/30196814 DC
09/30202602 DC
IST/37
09/30202766 DC
AGE/29
09/30197343 DC
IST/34
CW/1/2
09/30205279 DC
BS ISO/IEC 29199-3 Information technology.
JPEG XR image coding system. Part 3. Motion
JPEG XR
IST/37
09/30202768 DC
09/30206295 DC
09/30197346 DC
IST/34
PRI/89
09/30203242 DC
09/30206298 DC
PSE/18/6
09/30197353 DC
09/30203245 DC
PSE/18/6
FME/9/3
09/30203413 DC
AW/8
IST/37
09/30197477 DC
46
09/30207703 DC
BS ISO/IEC 10918-5 Information technology.
Digital compression and coding of continuoustone still images. JPEG File Interchange Format
(JFIF)
IST/37
09/30207815 DC
BS EN 15599-1 Thermal insulation products for
building equipment and industrial installations.
In-situ thermal insulation formed from
expanded perlite (EP) products. Part 1.
Specification for bonded and loose-fill products
before installation
PRI/72
09/30207822 DC
09/30208245 DC
09/30209043 DC
PRI/72
09/30207859 DC
FME/9/3
FME/9/3
AUE/18
09/30208248 DC
09/30208460 DC
BS EN 15727 Ventilation for buildings. Ducts
and ductwork components, leakage
classification and testing
B/546/5
09/30209158 DC
BS EN ISO 14245 Gas cylinders. Specifications
and testing of LPG cylinder valves. Self-closing
PVE/19
09/30209161 DC
RHE/2
09/30207865 DC
BS EN 13859-1 Flexible sheets for
waterproofing. Definitions and characteristics
of underlays. Part 1. Underlays for
discontinuous roofing
09/30208473 DC
BS EN 843-7 Advanced technical ceramics.
Mechanical properties of monolithic ceramics at
room temperature. Part 7. C-ring tests
RPI/13
09/30209360 DC
BS EN 16014 Hardware for furniture. Strength
and durability of locking mechanism
FW/0/2
09/30207868 DC
09/30208476 DC
B/546/5
RPI/13
09/30208217 DC
BS ISO 1207 Slotted cheese head screws.
Product grade A
FME/9/3
09/30208500 DC
BS EN 58 Bitumen and bituminous binder.
Sampling bituminous binders
PTI/13
09/30209374 DC
BS EN 15969-2 Tanks for transport of
dangerous goods. Digital interface for the data
transfer between tank vehicle and with
stationary facilities. Part 2. Commercial and
logistic data
AUE/18
09/30208224 DC
BS ISO 1481 Slotted pan head tapping screws
09/30208703 DC
FME/9/3
09/30208227 DC
EH/2/3
09/30209443 DC
BS EN 15876-2 Electronic fee collection.
Conformity evaluation of on-board unit and
roadside equipment to EN 15509. Part 2.
Abstract test suite
EPL/278
09/30208725 DC
BS EN 13037 Soil improvers and growing
media. Determination of pH
09/30208230 DC
AW/20
FME/9/3
09/30209524 DC
BS EN 16019 Railway applications. Automatic
coupler. Performance requirements, specific
interface geometry and test method
RAE/1/-/13
09/30208728 DC
09/30208233 DC
BS ISO 2702 Heat-treated steel tapping screws.
Mechanical properties
FME/9/3
09/30209615 DC
BS ISO 5149-1 Refrigerating systems and heat
pumps. Safety and environmental requirements.
Part 1. Definitions, classification and selection
criteria
RHE/18
09/30208236 DC
BS ISO 4766 Slotted set screws with flat point
09/30208731 DC
FME/9/3
09/30208239 DC
AW/20
09/30209618 DC
BS ISO 5149-2 Refrigerating systems and heat
pumps. Safety and environmental requirements.
Part 2. Design, construction, testing, marking
and documentation
RHE/18
FME/9/3
09/30208807 DC
09/30209621 DC
FME/9/3
RAE/2
RHE/18
09/30208242 DC
47
09/30212622 DC
09/30212950 DC
ICT/-/1
09/30210061 DC
ACE/6
PVE/1
09/30210215 DC
09/30212624 DC
PVE/1
PEL/23/1
09/30210236 DC
09/30212627 DC
PRI/3/60
ACE/6
09/30210239 DC
BS EN 1817 Resilient floor coverings.
Specification for homogeneous and
heterogeneous smooth rubber floor coverings
PRI/3/60
09/30210242 DC
BS EN 13647 Wood flooring and wood
panelling and cladding. Determination of
geometrical characteristics
B/543
09/30210245 DC
BS EN 13228 Wood flooring. Solid wood
overlay flooring elements including blocks with
an interlocking system
B/543
ACE/69
09/30212527 DC
BS EN 61850-7-410 Communication networks
and systems for power utility automation. Part
7-410. Hydroelectric power plants.
Communication for monitoring and control
PEL/57
09/30212538 DC
BS EN 60335-2-53 Household and similar
electrical appliances. Safety. Part 2-53. Particular
requirements for sauna heating appliances and
infrared cabins
CPL/61/07
09/30212954 DC
BS EN 61951-1 Secondary cells and batteries
containing alkaline or other non-acid
electrolytes. Portable sealed rechargeable single
cells. Part 1. Nickel-cadmium
PEL/21/1
09/30213143 DC
BS ISO/IEC 14496-1 AMD1 Information
technology. Coding of audio-visual objects. Part
1. Systems
IST/37
09/30213156 DC
09/30212628 DC
BS EN 3682-004 Aerospace series. Connectors,
plug and receptacle, electrical, rectangular,
interchangeable insert type, rack to panel,
operating temperature 150C continuous.
Part 004. Size 2 receptacle. Product standard
ACE/6
09/30213269 DC
BS EN 62271-4 High-voltage switchgear and
controlgear. Part 4. Use and handling of sulphur
hexafluoride (SF6)
09/30212729 DC
PEL/17/1
CH/62/2
09/30213280 DC
09/30212865 DC
09/30212268 DC
BS ISO 8625-4 Aerospace fluid systems.
Vocabulary. Part 4. Control/actuation systems
PEL/14
IST/17
RHE/18
09/30213528 DC
09/30212929 DC
BS EN 61850-4 Communication networks and
systems for power utility automation. Part 4.
System and project management
PEL/57
09/30212942 DC
BS EN 60076-18 Power transformers. Part 18.
Measurement of frequency response
PEL/14
09/30213532 DC
BS EN 60475 Method of sampling liquid
dielectrics
GEL/10
09/30212621 DC
BS EN 3682-001 Aerospace series. Connectors,
plug and receptacle, electrical, rectangular,
interchangeable insert type, rack to panel,
operating temperature 150C continuous.
Part 001. Technical specification
09/30212946 DC
BS EN 61300-2-10 Fibre optic interconnecting
devices and passive component. Basic test and
measurement procedures. Part 2-10. Tests. Crush
resistance
09/30213551 DC
ACE/6
GEL/86/2
GEL/10
48
BS EN 14023:2005
Bitumen and bituminous binders. Specification
framework for polymer modified bitumens
This standard is currently being revised by CEN.
The text has been made available under the
CEN UAP to member bodies for final vote.
Editorial comments only are allowed at this
stage.
If you have editorial comments they should be
directed to the Programme Manager (below).
Contact: Bernard Williams
prEN 2240-035
prEN 2434-004
prEN 2240-036
Aerospace series. Lamps, incandescent. Lamp,
code 388. Product standard
prEN 2240-037
Aerospace series. Lamps, incandescent. Lamp,
code 394. Product standard
ACE/65/-/3
prEN 2240-038
prEN 4662
prEN 2240-040
ACE/12
prEN 2240-039
Email: bernard.williams@bsigroup.com
B/510/19
EN 13848-5:2008/Amendment 1
Railway applications. Track. Track geometry
quality. Geometric quality levels. Plain line
The above amendment has been circulated by
CEN/TC 256 under the shortened UAP
procedure. Copies of the text of the
amendment may be obtained from the
Programme Manager (below).
prEN 4800-001
prEN 2240-041
Aerospace series. Lamps, incandescent. Lamp,
code 682. Product standard
prEN 2240-042
Aerospace series. Lamps, incandescent. Lamp,
code 683. Product standard
Email: tim.newins@bsigroup.com
prEN 2240-044
RAE/2
prEN 2240-043
ISO/DIS 10672-2
prEN 2240-045
Aerospace series. Lamps, incandescent. Lamp,
code 714. Product standard
prEN 60335-2-91
Household and similar electrical appliances.
Safety. Particular requirements for walk-behind
and hand-held lawn trimmers and lawn edge
trimmers
The above draft has been issued under the
CENELEC UAP. Copies can be obtained from
the Programme Manager (below). Any
comments should be submitted no later than
28 February, 2010.
Contact: Bob Stratton
Email: bob.stratton@bsigroup.com
prEN 2240-046
prEN 2240-047
Email: anne.hannan@bsigroup.com
CEN/CENELEC UNIQUE
ACCEPTANCE PROCEDURE
prEN 2240-048
WEE/46
prEN 2240-031
Aerospace series. Lamps, incandescent. Lamp,
code 356. Product standard
prEN 2240-049
prEN 2240-032
Aerospace series. Lamps, incandescent. Lamp,
code 376. Product standard
prEN 2240-050
prEN 2240-033
Aerospace series. Lamps, incandescent. Lamp,
code 377. Product standard
prEN 2240-034
Aerospace series. Lamps, incandescent. Lamp,
code 382. Product standard
CPL/61/23
49
EN 415-5:2006+A1:2009
EN 1058:2009
MCE/3/3
B/541
EN 420:2003+A1:2009
PH/3/8
EN 1060-2:1995+A1:2009
Non-invasive sphygmomanometers.
Supplementary requirements for mechanical
sphygmomanometers
CH/205/10
EN 621:2009
The above standards have been circulated
under the UAP procedure for adoptions as
European Standards. Please submit any
comments by 22 January, 2010 to the contact
point (below).
Contact: Committee Service Centre
Email: csc@bsigroup.com
AW/4
CEN EUROPEAN
STANDARDS
EUROPEAN RATIFIED TEXTS
The documents listed below have recently
been issued by CEN but have not yet been
published as BS ENs. BSI has an obligation
to adopt all ENs and to withdraw any
conflicting British Standards (BSs) or parts
of BSs. The following will be
implemented as BS ENs or as amendments
to BS ENs shortly. Notification of their
implementation will be given in the
BS EN Publications section of the relevant
edition of Update Standards.
EN 1060-3:1997+A2:2009
Non-invasive sphygmomanometers.
Supplementary requirements for electromechanical blood pressure measuring systems
CH/205/10
EN 1230-1:2009
EN 622-4:2009
Fibreboards. Specifications. Requirements for
softboards
B/541
EN 1330-9:2009
EN 622-5:2009
Fibreboards. Specifications. Requirements for
dry process boards (MDF)
B/541
EN 1335-3:
EN 848-1:2007+A1:2009
Safety of woodworking machines. One side
moulding machines with rotating tool. Single
spindle vertical moulding machines
to EN 1335-3:2009
MTE/23
FW/0/3
EN 848-2:2007+A1:2009
EN 1349:2009
MTE/23
EN 1501-1:1998+A2:2009
FSH/2
EN 859:2007+A1:2009
EN 3-10:2009
EN 46-1:2009
Wood preservatives. Determination of the
preventive action against recently hatched
larvae of Hylotrupes bajulus (Linnaeus).
Application by surface treatment (laboratory
method)
B/515
PSE/7/11
MTE/23
EN 1501-2:2005+A1:2009
EN 933-11:
Tests for geometrical properties of aggregates.
Classification test for the constituents of coarse
recycled aggregate
CORRIGENDUM 1:November 2009
EN 46-2:2009
to EN 933-11:2009
B/502/6
EN 1539:2009
EN 1017:
MCE/3/8
B/515
EN 267:2009
Automatic forced draught burners for liquid
fuels
EN 1656:2009
CII/59
EN 1018:
CH/216
to EN 1017:2008
GSE/27
EN 343:
to EN 343:2003/A1:2007
to EN 1018:2006
PH/3
CII/59
B/502/6
50
EN 1744-1:2009
EN 1822-1:2009
EN 2869:2009
EN 4161:2009
ACE/12
ACE/12
MCE/21/3
EN 1822-2:2009
High efficiency air filters (EPA, HEPA and ULPA).
Aerosol production, measuring equipment,
particle counting statistics
MCE/21/3
EN 1822-3:2009
High efficiency air filters (EPA, HEPA and ULPA).
Testing flat sheet filter media
EN 3660-003:2009
EN 4162:2009
ACE/6
ACE/12
MCE/21/3
EN 3660-004:2009
EN 1822-4:2009
High efficiency air filters (EPA, HEPA and ULPA).
Determining leakage of filter elements (scan
method)
MCE/21/3
MCE/21/3
EN 1993-1-3:
EN 3660-005:2009
Aerospace series. Cable outlet accessories for
circular and rectangular electrical and optical
connectors. Cable outlet, style A, 90, unsealed
with clamp strain relief for EN 2997 and
EN 4067. Product standard
ACE/6
EN 3757:2009
to EN 1993-1-3:2006
B/525/32
EN 2240-002:2009
ACE/12
EN 4073:2009
EN 2817:2009
ACE/61/-/15
EN 4078:2009
Aerospace series. Nuts, anchor, self-locking,
floating, two lugs, with counterbore, in heat
resisting steel, MoS2 lubricated. Classification.
1100 MPa (at ambient temperature)/315C
EN 12001:2003+A1:2009
Conveying, spraying and placing machines for
concrete and mortar. Safety requirements
B/513/-/8
EN 12622:2009
Safety of machine tools. Hydraulic press brakes
MTE/1/1
EN 12966-1:2005+A1:2009
EN 4084:2009
ACE/12
ACE/12
ACE/12
EN 2866:2009
EN 6069:2009
ACE/6
EN 2865:2009
EN 4178:2009
EN 4645-002:2009
ACE/6
EN 1822-5:2009
High efficiency air filters (EPA, HEPA and ULPA).
Determining the efficiency of filter elements
EN 4163:2009
ACE/12
EN 13029:2009
Packaging. Light-gauge metal packaging.
Apertures for plug-in plastic closures
PKW/0/-/4
EN 4138:2009
EN 2867:2009
Aerospace series. Nuts, anchor, self-locking,
floating, one lug, with counterbore, in heat
resisting steel, MoS2 lubricated. Classification.
1100 MPa (at ambient temperature)/315C
ACE/12
ACE/12
EN 13042-1:2007+A1:2009
Machines and plants for the manufacture,
treatment and processing of hollow glass.
Safety requirements. Gob feeder
MCE/3/13
51
EN 14459:
EN 15649-5:2009
SW/65
MCE/3
to EN 14459:2007
EN 13114:2002+A1:2009
Tannery machines. Rotating process vessels.
Safety requirements
MCE/3
EN 13140:2000+A1:2009
GSE/22
EN 15649-6:2009
EN 14774-2:2009
SW/65
PTI/17
EN 15649-7:2009
AGE/32
EN 14775:2009
EN 13146-9:2009
Railway applications. Track. Test methods for
fastening systems. Determination of stiffness
RAE/2
SW/65
PTI/17
EN 14811:2006+A1:2009
EN 15689:2009
RAE/2
RAE/2
EN 14891:
EN 15695-1:2009
AGE/6
EN 13245-2:
Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. Profiles for
internal and external wall and ceiling finishes
CORRIGENDUM 1:November 2009
to EN 13245-2:2008
PRI/82
EN 13598-2:
Plastics piping systems for non-pressure
underground drainage and sewerage.
Unplasticized poly(vinyl chloride) (PVC-U),
polypropylene (PP) and polyethylene (PE).
Specifications for manholes and inspection
chambers in traffic areas and deep
underground installations
CORRIGENDUM 1:November 2009
to EN 13598-2:2009
to EN 14891:2007
EN 15695-2:2009
B/539
EN 15030:
Chemicals used for treatment of water intended
for human consumption. Silver salts for
intermittent use
AGE/6
EN 15708:2009
to EN 15030:2005
CII/59
PRI/88/1
EH/3/5
EN 15148:2009
EN 13674-4:2006+A1:2009
Railway applications. Track. Rail. Vignole
railway rails from 27 kg/m to, but excluding
46 kg/m
RAE/2
EN 15200:
SVS/0/1
EN 13803-2:2006+A1:2009
to EN 15200:2007
RAE/2
EN 13941:
Design and installation of preinsulated bonded
pipe systems for district heating
EN 15838:2009
B/503
EN 15841:2009
Ambient air quality. Standard method for
determination of arsenic, cadmium, lead and
nickel in atmospheric deposition
EH/2/3
EN 15649-1:2009
Floating leisure articles for use on and in the
water. Classification, materials, general
requirements and test methods
CEN WORKSHOP
AGREEMENTS
SW/65
CWA 16026:2009
EN 15649-2:2009
to EN 13941:2009
SW/65
EN 14214:2008+A1:2009
EN 15649-3:2009
CWA 16036:2009
PTI/2
SW/65
RHE/9
52
CEN Reports
CEN REPORTS
CEN/TR 15822:2009
Plastics. Biodegradable plastics in or on soil.
Recovery, disposal and related environmental
issues
CEN/TS 15901-9:2009
EN 60439-3:
B/510/5
PRI/21
to EN 60439-3:1991
CEN/TS 15901-10:2009
CEN TECHNICAL
SPECIFICATIONS
CEN/TS 15901-1:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface using a device with
longitudinal fixed slip ratio (LFCS): RoadSTAR
B/510/5
CEN/TS 15901-2:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface using a device with
longitudinal controlled slip (LFCRNL): ROAR
(Road Analyser and Recorder of Norsemeter)
B/510/5
CEN/TS 15901-3:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface using a device with
longitudinal controlled slip (LFCA): The ADHERA
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS
The documents listed below have recently
been issued by CENELEC but have not yet
been published as BS ENs. BSI has an
obligation to adopt all ENs and to
withdraw any conflicting British
Standards (BSs) or parts of BSs. The
following will be implemented as BS ENs
or as amendments to BS ENs shortly.
Notification of their implementation will
be given in the BS EN Publications section
of the relevant edition of Update
Standards.
EN 50173-1:
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
pavements using a device with longitudinal
controlled slip (LFCT): Tatra Runway Tester (TRT)
B/510/5
CEN/TS 15901-5:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface using a device with
longitudinal controlled slip (LFCRDK): ROAR
(Road Analyser and Recorder of Norsemeter)
B/510/5
CEN/TS 15901-6:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface by measurement of the
sideway force coefficient (SFCS): SCRIM
B/510/5
CEN/TS 15901-7:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface using a device with
longitudinal fixed slip ratio (LFCG): the
GripTester
B/510/5
CEN/TS 15901-8:2009
Road and airfield surface characteristics.
Procedure for determining the skid resistance of
a pavement surface by measurement of the
sideway-force coefficient (SFCD): SKM
B/510/5
54
EN 60601-2-20:2009
(IEC 60601-2-20:2009)
Medical electrical equipment. Particular
requirements for the basic safety and essential
performance of infant transport incubators
CH/62/4
B/510/5
CEN/TS 15901-4:2009
PEL/17/3
EN 60603-7-1:2009
(IEC 60603-7-1:2009)
Connectors for electronic equipment. Detail
specification for 8-way, shielded, free and fixed
connectors
EPL/48
EN 60603-7-2:2009
(IEC 60603-7-2:2007)
Connectors for electronic equipment. Detail
specification for 8-way, unshielded, free and
fixed connectors, for data transmissions with
frequencies up to 100MHz
EPL/48
EN 60603-7-3:2009
(IEC 60603-7-3:2008)
to EN 50173-1:2007
EPL/48
TCT/7
EN 60603-7-5:2009
(IEC 60603-7-5:2007)
EN 55011:2009
(IEC CISPR 11:2009)
Industrial, scientific and medical equipment.
Radio-frequency disturbance characteristics.
Limits and methods of measurement
GEL/210/11
EN 60068-2-38:2009
(IEC 60068-2-38:2009)
Environmental testing. Tests. Test Z/AD.
Composite temperature/humidity cyclic test
EN 60603-7:2009
(IEC 60603-7:2008)
Connectors for electronic equipment. Detail
specification for 8-way, unshielded, free and
fixed connectors
EPL/48
GEL/104
EN 60630:
(IEC 60630:1994/A6:2009)
EN 60269-4:2009
(IEC 60269-4:2009)
to EN 60630:1998
PEL/32
EN 60633:
(IEC 60633:1998/A1:2009)
EN 60300-3-11:2009
(IEC 60300-3-11:2009)
Dependability management. Application guide.
Reliability centered maintenance
to EN 60633:1999
PEL/22
DS/1
EN 60738-1:
(IEC 60738-1:2006/A1:2009)
EN 61988-2-3:2009
(IEC 61988-2-3:2009)
EPL/47
to EN 60738-1:2006
EPL/40X
EN 60749-20:2009
(IEC 60749-20:2008)
Semiconductor devices. Mechanical and climatic
test methods. Resistance of plastic encapsulated
SMDs to the combined effect of moisture and
soldering heat
EPL/47
EN 60947-7-3:2009
(IEC 60947-7-3:2009)
Low-voltage switchgear and controlgear.
Ancillary equipment. Safety requirements for
fuse terminal blocks
EN 61988-3-2:2009
(IEC 61988-3-2:2009)
Plasma display panels. Interface. Electrical
interface
to EN 62040-3:2001
PEL/22
EN 62074-1:2009
(IEC 62074-1:2009)
Fibre optic interconnecting devices and passive
components. Fibre optic WDM devices. Generic
specification
GEL/86/2
GEL/86/2
GEL/86/2
EN 61439-2:2009
(IEC 61439-2:2009)
Low-voltage switchgear and controlgear
assemblies. Power switchgear and controlgear
assemblies
PEL/17/3
EN 61606-1:2009
(IEC 61606-1:2009)
Audio and audiovisual equipment. Digital audio
parts. Basic measurement methods of audio
characteristics. General
EPL/100
AMT/7
PEL/17/3
AMT/7
EN 62040-3:
EN 62134-1:2009
(IEC 62134-1:2009)
CLC/TR 62453-61:2009
(IEC/TR 62453-61:2009)
EN 61300-2-12:2009
(IEC 61300-2-12:2009)
EN 61439-1:2009
(IEC 61439-1:2009)
CLC/TR 62453-41:2009
(IEC/TR 62453-41:2009)
EPL/47
PEL/17/2
EN 61300-2-1:2009
(IEC 61300-2-1:2009)
CENELEC REPORTS
EN 62223:2009
(IEC 62223:2009)
Insulators. Glossary of terms and definitions
CLC/TR 62453-501:2009
(IEC/TR 62453-501:2009)
Field device tool (FDT) interface specification.
Communication implementation for common
object model. IEC 61784 CPF 1
AMT/7
CLC/TR 62453-502:2009
(IEC/TR 62453-502:2009)
Field device tool (FDT) interface specification.
Communication implementation for common
object model. IEC 61784 CPF 2
AMT/7
CLC/TR 62453-503-1:2009
(IEC/TR 62453-503-1:2009)
Field device tool (FDT) interface specification.
Communication implementation for common
object model. IEC 61784 CP 3/1 and CP 3/2
AMT/7
PEL/36
EN 62282-6-300:2009
(IEC 62282-6-300:2009)
Fuel cell technologies. Micro fuel cell power
systems. Fuel cartridge interchangeability
GEL/105
EN 62386-205:2009
(IEC 62386-205:2009)
Digital addressable lighting interface. Particular
requirements for control gear. Supply voltage
controller for incandescent lamps (device
type 4)
CLC/TR 62453-503-2:2009
(IEC/TR 62453-503-2:2009)
Field device tool (FDT) interface specification.
Communication implementation for common
object model. IEC 61784 CP 3/4, CP 3/5 and
CP 3/6
AMT/7
CLC/TR 62453-506:2009
(IEC/TR 62453-506:2009)
Field device tool (FDT) interface specification.
Communication implementation for common
object model. IEC 61784 CPF 6
EN 61606-2:2009
(IEC 61606-2:2009)
CPL/34/3
AMT/7
EN 62386-206:2009
(IEC 62386-206:2009)
CLC/TR 62453-509:2009
(IEC/TR 62453-509:2009)
CPL/34/3
AMT/7
EN 62386-207:2009
(IEC 62386-207:2009)
CLC/TR 62453-515:2009
(IEC/TR 62453-515:2009)
CPL/34/3
AMT/7
EPL/100
EN 61753-086-2:2009
(IEC 61753-086-2:2009)
Fibre optic interconnecting devices and passive
components performance standard. Nonconnectorised single-mode bidirectional
1490/1550 nm downstream 1310 nm upstream
WWDM devices for category C. Controlled
environment
GEL/86/2
55
IEC Publications
IEC PUBLICATIONS
It is BSI policy to supply the UK version of
all adopted standards, which are
published as British standards, unless
otherwise requested.
The following IEC publications are
available from BSI Customer Services (see
How to order on page 2)
IEC 60789:
IEC 61978-1:2009
(Edition 2)
to IEC 60789:2005
CH/62/3
GEL/86/2
IEC 60851-1:
Winding wires. Test methods. General
AMENDMENT 2:November 2009
to IEC 60851-1:1996
EPL/47
IEC/ISO 31010:2009
GEL/55
DS/1
IEC 62150-4:2009
IEC 61243-3:2009
(Edition 2)
IEC 60079-29-4:2009
Explosive atmospheres. Gas detectors.
Performance requirements of open path
detectors for flammable gases
121.92 members, 127.00 non-members
GEL/31/19
(Edition 4)
Electrical installations in ships. Equipment.
Luminaires and lighting accessories
83.52 members, 87.00 non-members
IEC 61280-1-4:2009
Fibre optic communication subsystem test
procedures. General communication subsystems.
Light source encircled flux measurement
method
134.40 members, 140.00 non-members
GEL/86/3
JPEL/18
IEC 61300-3-35:2009
IEC 60191-6:2009
(Edition 3)
Mechanical standardization of semiconductor
devices. General rules for the preparation of
outline drawings of surface mounted
semiconductor device packages
134.40 members, 140.00 non-members
EPL/47
IEC 61753-111-7:2009
IEC 60335-2-30:2009
(Edition 5)
GEL/86/2
IEC 61753-111-8:2009
CPL/61/07
IEC 61753-111-9:2009
to IEC 60404-3:1992
30.72 members, 32.00 non-members
ISE/NFE/5
IEC 60695-1-10:2009
Fire hazard testing. Guidance for assessing the
fire hazard of electrotechnical products.
General guidelines
73.92 members, 77.00 non-members
GEL/89
56
GEL/86/3
IEC/TR 62271-305:2009
High-voltage switchgear and controlgear.
Capacitive current switching capability of airinsulated disconnectors for rated voltages
above 52 kV
73.92 members, 77.00 non-members
PEL/17/1
IEC 62341-5:2009
Organic light emitting diode (OLED) displays.
Environmental testing methods
57.60 members, 60.00 non-members
EPL/47
IEC 62423:2009
(Edition 2)
Type F and type B residual current operated
circuit-breakers with and without integral
overcurrent protection for household and
similar uses
134.40 members, 140.00 non-members
PEL/23/1
IEC 62540:2009
IEC 60404-3:
PEL/78
(Edition 2)
IEC 60092-306:2009
IEC 61988-5:2009
IEC 62578:2009
Fibre optic interconnecting devices and passive
components performance standard. Sealed
closures for category S. Subterranean
100.80 members, 105.00 non-members
GEL/86/2
IEC/TR 61916:2009
(Edition 2)
Electrical accessories. Harmonization of general
rules
100.80 members, 105.00 non-members
PEL/23
IEC/PAS Publications
IEC/PAS PUBLICATIONS
IEC/PAS 61753-1-3:2009
Fibre optic interconnecting devices and passive
components performance standard. General
and guidance for performance standards.
Single-mode fibre optic connector performance
for harsh industrial operating conditions
91.20 members, 95.00 non-members
ISO 639-6:2009
ISO 6721-12:2009
TS/1
PRI/21
ISO 1926:2009
ISO 7176-9:2009
GEL/86/2
(Edition 4)
(Edition 3)
ISO PUBLICATIONS
PRI/24
CH/173/1
ISO 2062:2009
ISO 8536-6:2009
(Edition 3)
(Edition 2)
ISO 5-1:2009
TCI/24
(Edition 2)
ISO 5-2:2009
(Edition 5)
Photography and graphic technology. Density
measurements. Geometric conditions for
transmittance density
70.08 members, 73.00 non-members
CPW/42
CH/212
ISO 8724:2009
ISO 3046-4:2009
(Edition 3)
Reciprocating internal combustion engines.
Performance. Speed governing
79.68 members, 83.00 non-members
(Edition 2)
Cork decorative panels. Specification
57.60 members, 60.00 non-members
PRI/81
MCE/14/-/6
ISO 3375:2009
(Edition 2)
Textile glass. Determination of stiffness of
rovings
38.40 members, 40.00 non-members
ISO 9100-2:
Glass containers. Vacuum lug finishes. 33
medium
CORRIGENDUM 1:November 2009
to ISO 9100-2:2005
PKW/0/-/7
PRI/42
ISO/IEC 9594-6:
ISO 3691-5:2009
CPW/42
MHE/7
ISO 105-F10:
ISO 5536:2009
(Edition 2)
ISO 5-4:2009
(Edition 3)
to ISO 105-F10:1989
14.40 members, 15.00 non-members
TCI/81
to ISO/IEC 9594-6:2005
IST/6
ISO/IEC 9594-8:
Information technology. Open Systems
Interconnection. The Directory: Public-key and
attribute certificate frameworks
CORRIGENDUM 2:November 2009
to ISO/IEC 9594-8:2005
AW/5
IST/6
ISO 6194-3:2009
ISO 10077-1:
(Edition 2)
ISO 148-1:2009
(Edition 2)
Metallic materials. Charpy pendulum impact
test. Test method
97.92 members, 102.00 non-members
ISE/NFE/4/4
MCE/11
B/540
58
to ISO 10077-1:2006
ISO/TR 11633-1:2009
ISO 13351:2009
(Edition 2)
IDT/1/2
IST/35
Fans. Dimensions
70.08 members, 73.00 non-members
MCE/17
ISO 13624-1:2009
ISO 10325:2009
Fibre ropes. High modulus polyethylene.
8-strand braided ropes, 12-strand braided ropes
and covered ropes
45.12 members, 47.00 non-members
TCI/77
ISO/TR 11633-2:2009
Health informatics. Information security
management for remote maintenance of
medical devices and medical information
systems. Implementation of an information
security management system (ISMS)
145.92 members, 152.00 non-members
IST/35
ISO 10547:2009
Polyester fibre ropes. Double braid construction
38.40 members, 40.00 non-members
TCI/77
ISO 10554:2009
Polyamide fibre ropes. Double braid
construction
38.40 members, 40.00 non-members
TCI/77
ISO 10556:2009
Fibre ropes of polyester/polyolefin dual fibres
45.12 members, 47.00 non-members
TCI/77
ISO 10572:2009
ISO 11664-5:2009
Colorimetry. CIE 1976 L*u*v* Colour space and
u, v uniform chromaticity scale diagram
50.88 members, 53.00 non-members
Will be implemented as an identical British Standard
ISO 11737-2:2009
(Edition 2)
Sterilization of medical devices. Microbiological
methods. Tests of sterility performed in the
definition, validation and maintenance of a
sterilization process
74.88 members, 78.00 non-members
CH/198
ISO/TS 12033:2009
TCI/77
IDT/1/2
ISO 13824:2009
Bases for design of structures. General
principles on risk assessment of systems
involving structures
122.88 members, 128.00 non-members
B/525/1
ISO/IEC 14165-321:2009
Information technology. Fibre channel. Audio
video (FC-AV)
166.08 members, 173.00 non-members
IST/6
ISO 14243-1:2009
(Edition 2)
Implants for surgery. Wear of total knee-joint
prostheses. Loading and displacement
parameters for wear-testing machines with load
control and corresponding environmental
conditions for test
70.08 members, 73.00 non-members
CH/150/4
ISO 14243-2:2009
CH/150/4
to ISO 12256:2002
ISO 12256:
EH/3
ACE/12
ISO 14343:2009
(Edition 2)
ISO 10874:2009
Resilient, textile and laminate floor coverings.
Classification
38.40 members, 40.00 non-members
(Edition 2)
ISO 10704:2009
PSE/17/-/4
STI/14
ISO/TS 12813:2009
PRI/3/60
EPL/278
ISO 11545:2009
ISO/IEC 14496-12:
(Edition 3)
ISO/IEC 13170:2009
AGE/30
ICT/-/1
IST/37
60
to ISO/IEC 14496-12:2008
131.52 members, 137.00 non-members
ISO/IEC 14763-3:
ISO/IEC 15944-7:2009
ISO 18696:
IST/40
to ISO 18696:2006
to ISO/IEC 14763-3:2006
TCI/24
ISO/IEC 15423:2009
(Edition 2)
Information technology. Automatic
identification and data capture techniques. Bar
code scanner and decoder performance testing
118.08 members, 123.00 non-members
IST/37
ISO 16245:2009
Information and documentation. Boxes, file
covers and other enclosures, made from
cellulosic materials, for storage of paper and
parchment documents
50.88 members, 53.00 non-members
IST/15
ISO 16894:2009
Wood-based panels. Oriented strand board
(OSB). Definitions, classification and
specifications
70.08 members, 73.00 non-members
ISO 17264:2009
IST/37
EPL/278
ISO 15590-1:2009
(Edition 2)
Petroleum and natural gas industries. Induction
bends, fittings and flanges for pipeline
transportation systems. Induction bends
108.48 members, 113.00 non-members
PSE/17/2
ISO 17267:2009
ISO 21809-4:2009
Petroleum and natural gas industries. External
coatings for buried or submerged pipelines
used in pipeline transportation systems.
Polyethylene coatings (2-layer PE)
113.28 members, 118.00 non-members
Will be implemented as an identical British Standard
TW/1
ISO/TS 22600-3:2009
Health informatics. Privilege management and
access control. Implementations
145.92 members, 152.00 non-members
IST/35
TW/1
ISO 22769:2009
to ISO/IEC TR 15938-8:2002
IST/37
ISO 22009:2009
to ISO/IEC 19794-7:2007
EPL/278
ISO 17365:2009
PSE/17/2
ISO/IEC TR 15938-8:
ISO 17364:2009
ISO/IEC 15909-2:2009
ISO/IEC 19794-7:
IST/44
B/541
to ISO/IEC 15444-12:2008
ISO/IEC 19770-2:2009
IDT/2
ISO/IEC 15444-12:
ISO 17366:2009
Supply chain applications of RFID. Product
packaging
93.12 members, 97.00 non-members
TW/1
ISO 22915-4:2009
ISO/IEC TR 15944-6:2009
Information technology. Business operational
view. Technical introduction to e-Business
modelling
118.08 members, 123.00 non-members
ISO 17367:2009
Supply chain applications of RFID. Product
tagging
122.88 members, 128.00 non-members
IST/40
TW/1
MHE/7
61
ISO/TS 27105:2009
ISO 31000:2009
B/525/2
AW/5
RM/1
ISO/IEC 23000-11:2009
Information technology. Multimedia application
format (MPEG-A). Stereoscopic video
application format
93.12 members, 97.00 non-members
ISO/TS 27106:2009
ISO 80000-1:2009
IST/37
AW/5
ISO 23848-1:2009
ISO/TS 27790:2009
ISO 80000-2:2009
IST/35
SS/7
ISO 23848-2:2009
ISO/TS 29062:2009
MTE/1
ISO 24153:2009
Random sampling and randomization
procedures
108.48 members, 113.00 non-members
SS/5
ISO 80000-10:2009
AUE/7
SS/7
ISO/IEC 29141:2009
Information technology. Biometrics. Tenprint
capture using biometric application
programming interface (BioAPI)
97.92 members, 102.00 non-members
IST/6
RMI/1
ISO/IEC 29171:2009
Information technology. Digitally recorded
media for information interchange and storage.
Information Versatile Disk for Removable usage
(iVDR) cartridge
102.72 members, 107.00 non-members
ISO 26782:
Anaesthetic and respiratory equipment.
Spirometers intended for the measurement of
time forced expired volumes in humans
ISO/TR 29662:2009
CH/121
to ISO 26782:2009
(Edition 3)
IST/44
ICT/-/1
ISO/IEC 24739-2:2009
Information technology. AT attachment with
packet interface-7. Parallel transport protocols
and physical interconnect (ATA/ATAPI-7)
230.40 members, 240.00 non-members
Help Us to Help
You!
ISO 26866:2009
ISO 29861:2009
AUE/11
ISO 29945:2009
ISO 26870:2009
Space systems. Launch pad and integration site
operational documents
74.88 members, 78.00 non-members
ACE/68/-/3
PTI/12
62
Contact
Customer Services
020 8996 9001
who will be happy to check it for you