Beruflich Dokumente
Kultur Dokumente
OBJECTIVE: This Project presents an automotive localization system using GPS and GSMSMS services. The system permits localization of the automobile and transmitting the position to the owner on his mobile phone as a short message (SMS) at his request. This Antitheft for vehicle security system is composed of a GPRS receiver, Microcontroller and a GSM Modem. Microcontroller is the master of this system with CAN bus and monitoring sensor which embedded with controller as well as fixed on Automobile (car,auto,ect) if person trying to theft or keyless entry, this system giving alarm sound as well sending alert message to owner using GSM modem. BLOCK DIAGRAM: Transmitter:
Vehicle 1
CANH
CANL
Receiver:
CELL PHONE
DESCRIPTION:
Controller Unit: This is master unit of this project and controlling the device which are all
connected to controller.
Sensor Unit: This sensor unit sensing the signal if any variation of default value of
controller for communicating with physical layer for data transformation between vehicle and CAN Bus. MAIN COMPONENT: 1. ARM7TDMI-S 2. GPS Receiver Module. 3. GSM Module. SOFTWARE USED: 1. KeilVersion4 2. Flash Utility. WORKING PROCEDURE: 1. When the car owner parking their car in parking places in a particular slot ,Now this system ready to work (i.e.) microcontroller keep on monitoring the sensor through CAN bus network. 2. This system when sensor giving signal to controller means someone trying to access the car without knowledge of car owner. 3. Sensor giving signal to controller unit, the controller automatically making alarm sound as well as sending alert message to owner through GSM modem.