Beruflich Dokumente
Kultur Dokumente
Page 1 2006-01
Because the viscosity reduces with increasing temperature, oil with a higher basic viscosity (ISO VG150/220) should be used in the dryer section.
0.874
200
-30
102
31
5.3
VG 32
SV 90 -aluminium, -stainless steel -heat resistant up to 150C -resistant against acids and leaches (stainlesssteel-version) 4 bar cleaned, filtered, oiled
0.930
270
-46
132
190
21
VG 150/220
If Control Valve is installed in a horizontal position (direction of camshaft) the Sensor Paddle should be rotated away from the fabric and one can insert the stop pin into the drilling in the housing. This allows the Sensor Paddle to lie against the stop pin.
PHONE FAX PHONE FAX 00423 - 375 82 82 00423 - 375 82 99 001-757 485 4371 001-757 485 4473
JUD AG LIECHTENSTEIN
JUD CORPORATION CHESAPEAKE VA.
00423 - 375 82 82 00423 - 375 82 99 001-757 485 4371 001-757 485 4473
JUD AG LIECHTENSTEIN
JUD CORPORATION CHESAPEAKE VA.
Page 2 2006-01
Page 3 2006-01
2.
3.
4.
Revolving the camshaft making sure that the red marks (of guide disk and housing) are corresponding. When installing the Control Valve it has to be placed that the fabric touches the middle of the Paddle and 16 zero position is achieved. (hint: for more aggressive and quicker reaction positioning further to top of Paddle, for more smooth and slower reaction positioning down to bottom of Paddle) Remove stop pin.
Service Unit
Control Valve SV 90
Exhaust air
Manometer Filter
1. horizontal arrangement
Recommended lubricant for Service Unit and Control Valve: Because the viscosity of the oil changes, oil appropriate to the operating area should be used. Hydraulic oil to DIN 51524-HLP of viscosity class ISO VG32 is recommended. These oils have a basic viscosity (at 40C) of 32 mm2/s and are suitable for use in the wet section.
JUD AG LIECHTENSTEIN
JUD CORPORATION CHESAPEAKE VA.
00423 - 375 82 82 00423 - 375 82 99 001-757 485 4371 001-757 485 4473
JUD AG LIECHTENSTEIN
JUD CORPORATION CHESAPEAKE VA.
00423 - 375 82 82 00423 - 375 82 99 001-757 485 4371 001-757 485 4473