Beruflich Dokumente
Kultur Dokumente
Product Overview
The DINSTAR DWG2000 GSM gateway enables providers to directly originate/terminate calls from/to local GSM networks. It is a cost-effective SIP/GSM gateway for SOHO, SMEs and system integrators, and also opens up new revenue generating opportunities for service providers. The document suitable for following products: DWG2001 GSM/CDMA VoIP Gateway DWG2004 GSM/CDMA VoIP Gateway DWG2008 GSM/CDMA VoIP Gateway
Notes: Detination Prefix any will match all digits of called number, its a wildcard. 6. Codec and other parameters configuration (System configuration\service configuration) 6.1 Codecs
Website: www.dinstar.com
Both Allow call from PSTN to IP without registration and Allow call from IP to PSTN without registration set to Yes;
Part Two (2) incoming call settings If you want to make incoming calls to specific extension or ring group automatically, configure it as following steps:
1. Configure incoming route (Routing configuration\IP->Tel route)
Website: www.dinstar.com
Quick Configuration Guide 2. Incoming calls route to Elastix s extension number or ring group (System configuration\port configuration)
Part three (3) reject all the incoming calls(optional) If you neednt incoming calls at all, create incoming reject rule as follow:
1. Add a Tel->IP routing(Routing configuration\IP->Tel route)
Website: www.dinstar.com
Website: www.dinstar.com