Beruflich Dokumente
Kultur Dokumente
H5350
Date 2008.01.24 Revise Version V1.0 Description Initial Issue
SI :
Emy
TSE:
Roch
Check:
Approved:
Preface
This manual is applied to H5350 projection system. The manual gives you a brief description of basic technical information to help in service and maintain the product. Your customers will appreciate the quick response time when you immediately identify problems that occur with our products. We expect your customers will appreciate the service that you offer them. This manual is for technicians and people who have an electronic background. Please send the product back to the distributor for repairing and do not attempt to do anything that is complex or is not mentioned in the troubleshooting. Notice: The information found in this manual is subject to change without prior notice. Any subsequent changes made to the data herein will be incorporated in future edition.
H5350 Service Manual Copyright Jan.2008 All Rights Reserved Manual Version 1.0
H5350
Confidential
Table of Content
Chapter 1 Introduction Highlight Compatible Mode Product Overview 1-1 1-3 1-7
Chapter 2
Disassembly Process Equipment Needed & Product Overview Disassemble Lamp Cover Module Disassemble Lamp Module Disassemble Top Cover Module Disassemble Top Shielding Disassemble Main Board Module & I/O Cover Module Disassemble Front Cover Module Disassemble Engine Module Disassemble Color Wheel Module Disassemble Zoom Ring & Focus Ring Disassemble DMD Board and DMD Chip Module Disassemble Fan Module Disassemble Blower Module Disassemble Speaker Module Disassemble LVPS Module Disassemble Interrupt Switch Module Disassemble Lamp Driver Module Disassemble Bottom Cover Module Rod Adjustment Re-write Lamp Usage Hour
2-1 2-2 2-2 2-3 2-4 2-4 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-18 2-19 2-20
H5350
Confidential
Assemble Bottom Cover Module Assemble Lamp Driver Module Assemble Interrupt Switch Module Assemble LVPS Module Assemble Speaker Module Assemble Blower Module Assemble Fan Modul Assemble DMD Board and DMD Chip Assemble Zoom Ring&Focus Ring Assemble Color Wheel Module Assemble Engine Module Assemble Front Cover Module Assemble Main Board Module & I/O Cover Module Assemble Top Shielding Assemble Top Cover Module Assemble Lamp Module Assemble Lamp Cover Module
2-21 2-22 2-24 2-25 2-26 2-26 2-27 2-28 2-29 2-30 2-31 2-32 2-33 2-34 2-35 2-36 2-36
Chapter 3
Chapter 4
Function Test & Alignment Procedure Test Equipment Needed Service Mode OSD Reset Test Condition Test Inspection Procedure H5350
Confidential
PC Mode Defect specification table Video Performance Optical Performance Measure Other
Chapter 5
Firmware Upgrade Equipment Needed DLP Composer Lite Setup Procedure USB Driver Upgrade Procedure Firmware Upgrade Procedure
Chapter 6
EDID Upgrade EDID Introduction Equipment Needed Setup Procedure (VGA) EDID Key-In Procedure Setup Procedure (HDMI)
Appendix A
Exploded Image
Appendix B
XXI XXII
H5350
Confidential
Chapter 1
Introduction
1-1 Highlight
Description - 267 mm X 187 mm X 80 mm - <5 lbs - 4 degree with elevator mechanism - Universal AC 100 240 V ~ 50-60 Hz with PFC input - 180W for Osram E20.6 Lamp @ normal operation - Variant FAN speed control (Depends on temperature vari ance) - +/ -40 degree (80 degree) - Advanced Air Flow - Two fans with system acoustic noise level 35 dB(A) (typi cal) - Temperature control circuits with adaptive fan rotational speeds - Maximum touch temperature follow UL60950-1 -1700 ANSI Lumens (Typical; Full power mode) -1450 ANSI Lumens (Minimum; Full power mode) - 1500 : 1 Full White and Black (Minimum; Full power mode) - 1800 : 1 Full White and Black (Typical; Full power mode) - 65% Japan standard (Minimum; Full power mode) - 80% Japan standard (Typical; Full power mode) - 58@2M(1.55 ~ 1.70 :1) - 2W*1 - F# 2.44~2.58, f = 21.83~23.81 mm, 1.10X Mechanical Zoom Lens - 3500 hours min, 50% survival rate - TI DDP2230
Cooling system
7 8 9 10 11 12 13 14
Brightness Contrast Uniformity Throw ratio Audio Projection lens Lamp life System controller
H5350
Confidential
1-1
No
Item
Description - One HDMI input - One D-sub VGA input - One RCA Composite input - Three RCA Component input - One S-Video input(4 pin Mini din) - One audio input (2.5m phone jack) - One USB port (Type B Female) - Lamp Assembly could be changed by customer himself, but should read the user manual for instruction in advance. - Lamp Assembly should be provided by Coretronic and dis tributed through authorized agencies. - Hsync Frequency 31 ~ 100 kHz - Vsync Frequency 56 ~ 85 Hz - Video Signal RGB (PC) Analog RGB 0.7Vp-p, 75 ohm, Separate TTL H,V Sync Analog RGB 1Vp-p, 75 ohm, Sync. On Green signal Analog RGB 0.7Vp-p, 75 ohm, Composite TTL Sync. - Video Composite video 1Vp-p,75 ohm S-video Luminance 0.714Vp-p, 75 ohm Chrominance 0.286Vp-p, 75 ohm Component Video 1Vp-p, 75 ohm - TI DMD 0.62 12 2xLVDS Type-A 720p Digital Mirror Device - Standards : NTSC (3.58/4.43) PAL (B/D/G/H/I/M/N) SECAM (B/D/G/K/K1/L) HDTV - 480i,576i 480p, 576p, 720p, 1080i,1080p - Compression : by using DDP2230 Chips can make image compression - 1280(H) x 720(V) - 6 segments (R90/Y35/G90/C35/W28/B82) - 7200 rpm - 180 Watt OSRAM Lamp (user replaceable) for full power mode - Operating: 5C -- 35C - Storage: -20C -- 60C
15
Terminal
16
Lamp housing
17
18
TI DMD
19
Video compatibility
20 21 22 23 24
H5350
Confidential
1-2
VGA
SVGA
XGA
SXGA
QuadVGA SXGA+ UXGA Power Mac G4 Power Mac G4 Power Mac G4 Power Mac G4 Power Mac G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4
Modes
Resolution
PowerBook G4 1152x870 PowerBook G4 1280x960 i Mac DV(G3) 1024x768 (2) VGA Analog - Extended Wide timing 1280x768 WXGA 1280x768 1280x768 1280x720 1280x800 Native 1440x900 1680x1050
V.Frequency [Hz] 75 75 75 60 75 85 60 60 60 60
H5350
Confidential
1-4
B. HDMI Digital (1) HDMI PC Signal Modes Resolution 640x480 640x480 640x480 640x480 720x400 720x400 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 1280x960 1400x1050 1600x1200 640x480 800x600 1024x768 1152x870 1280x960 640x480 V.Frequency [Hz] 60 72 75 85 70 85 56 60 72 75 85 75 60 70 75 85 70 75 85 60 72 75 85 60 75 60 60 66.6(67) 60 60 75 75 60 H.Frequency [KHz] 31.5 37.9 37.5 43.3 31.5 37.9 35.1 37.9 48.1 46.9 53.7 49.7 48.4 56.5 60 68.7 63.8 67.5 77.1 64 77 80 91.1 60 75.2 65.3 75 34.9 37.9 48.4 68.7 75 31.4
VGA
SVGA
XGA
SXGA
QuadVGA SXGA+ UXGA Power Mac G4 Power Mac G4 Power Mac G4 Power Mac G4 Power Mac G4 PowerBook G4
H5350
Confidential
1-5
Modes
Resolution
PowerBook G4 640x480 PowerBook G4 800x600 PowerBook G4 1024x768 PowerBook G4 1152x870 PowerBook G4 1280x960 i Mac DV(G3) 1024x768 (2) HDMI Extended Wide timing 1280x768 WXGA 1280x768 1280x768 1280x720 1280x800 (Native) 1440x900 1680x1050 (3) HDMI Video Signal For TWN/USA SKU 480i (NTSC) 720x480(1440x480) 480p (NTSC) 720x480 720p (NTSC) 1280x720 1080i (NTSC) 1920x1080 1080p (NTSC) 1920x1080 For EMEA SKU 576i (PAL) 720x576(1440x576) 576p (PAL) 720x576 720p (PAL) 1280x720 1080i (PAL) 1920x1080 1080p (PAL) 1920x1080 Horizontal scan rate: Graphic source monitor range limits Vertical scan rate:
H.Frequency [KHz] 34.9 37.9 48.4 68.7 75 60 47.8 60.3 68.6 44.8 49.6 59.9 65.3
H5350
Confidential
1-6
Product Overview
Projector Outlook
Front /Upper side
Item 1 2 3 4
Item 5 6 7
Description Power button and Power Indicator LED Remote control Remote control receiver
H5350
Confidential
1-7
Rear side
Item 1 2 3 4 5
Description USB connector HDMI connector Analog RGB/component input connector Component video input connector S-Video input connector
Item 6 7 8 9
Description Composite video input connector Audio input connector Power socket KensingtonTM lock port
H5350
Confidential
1-8
H5350
Confidential
1-9
Item 1 2 3
Icon
Description Sends signals to the projector. Power button and Power Indicator LED. Refer to the Turning the Projector On/Off section. Press MENU to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Use up, down, left, right buttons to select items or make adjustments to your selection. Zooms the projector display in or out. To choose the desired aspect ratio (Auto/4:3/16:9/L.Box). Press 0~9 to input a password in the Security settings. Adjusts the image to compensate for distortion caused by tilting the projector ( 40 degrees). Automatically synchronizes the projector to the input source. Press SOURCE to choose RGB, Component, S-Video, Composite and HDTV sources. Momentarily turns off the video. Press HIDE to hide the image, press again to display the image. Unique Acer functions: eView, eTimer Management. To pause the screen image.
MENU Four directional select keys ZOOM ASPECT RATIO KeyPad 0~9 KEYSTONE RESYNC SOURCE HIDE Empowering key FREEZE
5 6 7 8 9 10 11 12 13 14
Note:
H5350
Confidential
1-10
Remote Control Placement Please refer to the illustration to attach the remote control to the projector.
H5350
Confidential
1-11
Description
Description RCA component cable for YPbPr S-Video cable Audio cable Jack/RCA
Note: To ensure the projector works well with your computer,please make sure the timing of the display mode is compatible with the projector.
H5350 Confidential 1-12
H5350
Confidential
1-13
H5350
Confidential
1-14
Chapter 2
H5350
Confidential
2-
Lamp Module
H5350
Confidential
2-2
H5350
Confidential
2-3
Top Shielding
H5350
Confidential
2-
4. Pull up the Main Board Module and then unplug 1 connector(As green square) 5. Disassemble Main Board Module and I/O Cover Module 6. Unscrew 3 screws to disassemble I/O Cover Module from Main Board Module
H5350
Confidential
2-5
H5350
Confidential
2-
Engine Module
H5350
Confidential
2-7
H5350
Confidential
2-
Focus Ring
H5350
Confidential
2-
Heat Sink
H5350
Confidential
2-0
H5350
Confidential
2-
3. Unscrew 4 screws to disassemble Fan Module 4. Unscrew 1 screw to disassemble Thermal Switch
H5350
Confidential
2-2
2. Press the two tenons outward to disassemble the Speaker from the Speaker Holder
H5350
Confidential
2-3
LVPS Module
H5350
Confidential
2-
Film tape
Interrupt Switch Module
H5350
Confidential
2-5
H5350
Confidential
2-
4. Unplug 2 connectors to disassemble 2PIN and 5PIN cable 5. Unscrew 4 screws to disassemble Lamp Driver from Lamp Driver Holder
H5350
Confidential
2-17
ROD DUCT
H5350
Confidential
2-
H5350
Confidential
2-
H5350
Confidential
2-20
H5350
Confidential
2-2
3. Stick a Mylar
H5350
Confidential
2-22
4. Plug 1 connector(As blue square)and screw 2 screws to assemble Lamp Driver to Lamp Cable
Note: - The lamp driver to lamp cable must be passed through two Dents.(As the yellow square)
H5350
Confidential
2-23
Aperture Dent
Film tape
H5350
Confidential
2-2
H5350
Confidential
2-25
H5350
Confidential
2-2
H5350
Confidential
2-27
H5350
Confidential
2-2
H5350
Confidential
2-2
H5350
Confidential
2-30
H5350
Confidential
2-3
H5350
Confidential
2-32
H5350
Confidential
2-33
H5350
Confidential
2-3
H5350
Confidential
2-35
H5350
Confidential
2-3
Chapter 3
Troubleshooting
3-1 LED Lighting Message
Message Input Power Plug Standby Power button ON Lamp retry Power off (Cooling state) Power button OFF: Cooling completed; Standby Mode Error (Thermal Failure) Error (Fan lock) Error (Lamp breakdown) Error (Color Wheel fail)
Power LED Red Flash ON to OFF 100ms V --Quick Flashing V Blue --V Quick Flashing ---
Quick Flashing RED and Steady BLUE by returns Quick Flashing RED and Steady BLUE by returns Quick Flashing BLUE and Steady RED by returns Quick Flashing BLUE and Steady RED by returns
H5350
Confidential
3-
Procedure
- Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and arent
No Power
broken - Check Lamp Driver - Check LVPS - Check Main Board - Check LED Status a. Lamp LED Light - Check Lamp - Check Lamp Driver - Check Main Board
b. Temp LED Light - Check Thermal Switch - Check Fan c. Color Wheel - Check Color Wheel - Check Photo Sensor
H5350
Confidential
3-
No
Symptom
Procedure
- Ensure the Signal Cable and Source work (If you connect multiple sources at the same time, use the Source button switch) - Ensure all connectors are securely connected and arent
No Image
broken - Check Main Board - Check DMD Board - Check DMD Chip - Check Engine Module - Ensure all connectors are securely connected and arent broken - Check Lamp Module
No Light On
- Check Lamp Driver - Check LVPS - Check Main Board - Check Color Wheel - Check Fan Module - Check if the Main Board and the DMD Board are assembled properly
Machanical Noise
- Check Main Board - Check DMD Board - Check DMD Chip - Do Reset(All data) of the OSD Menu - Ensure that the signal cables and source are work as well
Image Flicker
- Check Lamp Module - Check Color Wheel - Check DMD Board - Check Main Board
H5350
Confidential
3-3
No
Symptom
Procedure
- Do Reset(All data) of the OSD Menu - Adjust Color Wheel Index - Check Main Board - Check Color Wheel - Ensure the projection screen without dirt - Ensure the projection lens is clean
Color Abnormal
- Ensure the Brightness is within spec - Check rod alignment - Check Engine Module - Ensure the projection screen without dirt - Ensure the projection lens is clean
0
- Clean DMD Chip and Engine Module - Check DMD Chip - Check Engine Module - Ensure that the signal cables and source work as well
Garbage Image
Remote Control
a.Check Battery b.Check Remote Controller c.Check Main Board - Do Reset(All data) of the OSD Menu
3
Function Abnormal
- Check Main Board - Check DMD Board - Ensure that the signal cables and source are work as well
4
Audio Abnonrmal
H5350
Confidential
3-4
No
Symptom
Procedure
- An unique Universal Password which is printed on the Security Card. This unique password is a back door of Administrator Password which will be accepted by projector anytime no matter what the Administrator Password is. - How to get the Universal Password? (1) Click the AcerSNID
(2) Input SNID number.(SNID number is on the Security Card) Forgetting Password (adminstrator Password) (3) ClickCalculate.Then the Universal Password will appear.
5
H5350
Confidential
3-5
Chapter 4
H5350
Confidential
4-
After setting up the time, choose Burn-In mode and hit enter
H5350
Confidential
4-2
4-6 PC MODE
1. Frequency and tracking boundry
Procedure - Test equipment: video generator. - Test signal: analog 1280 x 720@60Hz - Test Pattern: general-1 or master - Check and see if the image sharpness is wellperformed. - If not re-adjust by the following steps: (1) Select "Frequency" function to adjust the total pixel number of pixel clock in one line period. (2) Select "Tracking" function and use right or left arrow key to adjust the value to minimize
Master General-1
H5350
Confidential
4-3
video flicker. - Adjust Resync or Frequency/Tracking/H. Position/V. Position to the inner screen. Inspection item - Eliminate visul wavy noise by Rsync, Frequency or Tracking selction. - Check if there is noise on the screen. - Horizontal and vertical position of the vedio should be adjustable to the screen frame. Criteria - If there is noise on the screen, the product is considered as faliure product. - If there is noise on the screen, use auto or manual frequency function or tracking function to adjust the screen. - The PC mode functionally sure be workable include support format with frequency and auto detected functional will be workable.
3. Blemish (Dark)
Procedure - Test equipment: video generator. - Test signal: analog 1280 x 720@60Hz. . - Test Pattern: blue 60
Blue 60
H5350
Confidential
4-4
- Dark blemish check.(dirty) - The bright blemish is unacceptable when it appears on blue 60 pattern. - Ref. below table Note: The defect criteria follows TI specification.
H5350
Confidential
4-5
Inspection item
Criteria
- Focus check - From screen 2.25 M via visual to check the focus, look at the entire screen, focus shall be clear, crisp, and sharp over the entire surface of the display pattern.(Blur word on one of the corner after adjustment is acceptable. However, the word should at least be recognizable.)
Full screen
MEME Sony
Master
SMPTE RP-133
Confidential
4-6
heavy lines. - The PC mode functionally sure be workable include support format with frequency and auto detected functional will be workable
H5350
Confidential
4-7
- Video performance test - 1.8M ~2.5M - Check any abnormal color, line distortion or any noise on the screen. - Check the sound from speakers.
2. S-Video
Procedure Inspection item Inspection Distance Criteria - Test equipment: DVD player - Test signal: S-Video - Video performance test - 1.8M ~2.5M - Check any abnormal color, line distortion or any noise on the screen. - Check the sound from speakers.
3. HDTV/ Component
Procedure Inspection item Inspection Distance Criteria - Test equipment: DVD player - Test signal: Ycbcr/YPbPr - HDTV performance test - 1.8M ~2.5M - Check any abnormal color, line distortion or any noise on the screen. - Check the sound from speakers.
4. Audio Test
Procedure Inspection item Inspection Distance Criteria - Test equipment: DVD player - Test signal: CVBS - Audio performance test - 1.8M ~2.5M - Check the sound from speakers. - Check Volume is normal - Check Mute is normal
- Test Pattern : Any Pattern - Equipment: DVD Player with HDMI output - Display type must be set to 16:9 Inspection item Criteria - HDMI Test - Ensure if the image is well performed and the color can not discolor.
1. Test equipment
Procedure - Enter service mode:Press "PowerLeft
LeftMenu".
- Select RD test - Select Spoke On
2. Brightness
Procedure - Full white pattern - Use CL100 to measure brightness values of P1~P9. - Follow the brightness formula to calculate brightness values. Brightness Formula Avg.(P1~ P9)x1.1m2 Criteria - 800 lumens
Full white pattern
H5350
Confidential
4-
4. Uniformity
Procedure - Full white pattern - Use CL100 to measure brightness values of P1~P9 (see image: full white). - Follow the Uniformity formula to calculate average values. Uniformity Formula ANSI Uniformity = Avg. (P1, P3, P7, P9) P5 Criteria - 65% x 100%
4-11 Others
1. Functional Inspection
Keypad button - All keypad buttons must operate smoothly. - All OSD functions must be checked for functionality. When OSD menu is displayed, there H5350 Confidential 4-0
General
shall be no visible peaking, ringing, streaking, or smearing artifacts on the screen. Factory Default - The factory settings (with appropriate centering, size, geometry distortion, etc.) shall be displayed upon Recall is selected from OSD - All preset modes shall expand to full screen size using OSD Horizontal and Vertical Size controls - The purpose of the DDC test is to verify the DDC1/DDC2B operation of the projector and to verify Plug & Play function. - High pitch sound from cooling fan and color wheel is unacceptable.
Display Size
Acoustic
H5350
Confidential
4-
Chapter 5
Firmware Upgrade
5-1 Equipment Needed
Software : (DDP 2230- USB) - DLP Composer - Firmware - Library V7.1 0330 (library file has to put in PC and set right path in 5-4 step 4) Hardware : - Projector - Power cord (42.53506G002) - USB Cable (42.87304G001) - PC or Laptop
H5350
Confidential
5-
3 4
H5350
Confidential
5-2
6. Click "Next".
7. Click "Next".
9. Click "Finish".
H5350 Confidential
5-3
H5350
Confidential
5-4
4. Click Library. - Click the browse button and navigate to the directory where you put the library file in.
H5350 Confidential
5-5
7. Selete the item "skip Boot Loader Area" (select 32KB). - Click "Reset Bus" to erase the flash memory.
8. If the firmware is ready, click "start download" to process the firmware upgrade. - Click "Yes" to erase the flash memory.
H5350
Confidential
5-6
9. When firmware upgrade process is finished, the unit return to stand-by status. The LED power lights on and appears Red. - Unplug USB cable and power cord and replug in power cable.
32
10. Restart the unit and enter the service mode to check the firmware version.
(To enter service mode, please refer to Chapter 4 Function Test and Alignment Procedure.)
H5350 Confidential
5-7
Chapter 6
EDID Upgrade
6-1 EDID Introduction
Extended Display Identification Data is a VESA standard data format that contains basic information about a display device and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number. The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC), which sites between the display device and the PC graphics adapter. The system uses this information for configuration purposes, so the monitor and system can work together. Note: If a display device has digital input ports, like DVI or HDMI, but without EDID in its main board, the display device will show no image while the input source is digital signal.
H5350
Confidential
6-
H5350
Confidential
6-
Power CNN
P1
P2
VGA
Power Port
VGA Port
H5350
Confidential
6-3
2
(2)
2. Process (1) Check the COM port is "COM 2" (Select the COM port which you are using). (2) Click the "Model" button. (3) Choose the source file "ACER_H5350 EDID-A04_USA.ini" and then open it. 3 3. Process (1) Key in the serial number into the barcode blank space. (2) In "Write Source Select" item,select "Analog". (3) Click "Program" button. 4. Process (1) "Please change the cable to Analog" will be shown on the screen. (2) Please press "Ok" button. 4
(2) (1) (3) (3)
(1)
H5350 Confidential
6-4
6. Read EDID information (1) In the Read item,select "Analog" and "Trans". (2) Please press "Read" button. 6
7. Read EDID information (1) EDID Informations will show the result.
H5350
Confidential
6-5
P2
P1 P4
P3
H5350 Confidential
6-6
2. Process (1) Check the COM port is "COM 2" (Select the COM port which you are using). (2) Click the "Model" button. (3) Choose the source file "ACER_H5350 EDID-A04_USA.ini" and then open it.
2
(2)
(1)
(3)
3. Process (1) Key in the serial number into the barcode blank space. (2) In "Write Source Select" item,select "Digital". (3) Click "Program" button. 4. Process (1) "Please change the cable to Digital" will be shown on the screen. (2) Please press "Ok" button. 4
(2)
3
(1) (3)
H5350
Confidential
6-7
6. Read EDID information (1) In the Read item,select "Digital" and "Trans". (2) Please press "Read" button. 6
(2)
(2)
7. Read EDID information (1) EDID Informations will show the result.
(1)
H5350 Confidential
6-8
Appendix A
ASSY FAN SHIELDING MODULE WHITE H5350
1 2 3
Item
P/N
Parts Supply
1 2 3
85.1F123G260 SCREW PAN MECH E/SF M3*26 Ni 49.88T01G001 SUNON, KDE1207PKV1-A 70*70*20mm AXIAL FAN 43.88N01G001 THERMAL SWITCH WITH BRACKET (KLIXON YS11) 100 DEG. C
NO NO
H5350
Confidential
3 4
1 2
H5350
Confidential
Item P/N Description 1 42.00422G001 W.A 5P 150mm LAMP DRIVER TO MB X1160 2 42.00443G001 CABLE W.A, 2P #20 160mm LVPS TO BALLAST 3 42.00436G001 CABLE W.A. 2P #22 100mm LAMP DRIVER TO LAMP X1160 4 51.88T11G003 HOLDER LAMP DRIVER FOR H5350 5 51.88T18G001 KAPTON 10*10 0.05t X1160 6 51.89T04G001 MYLAR LAMP DRIVER H5350 7 51.8AQ02G001 INTERLOCK SWITCH HOLDR FOR NEC 70.89T15GR01 ASSY LAMP DRIVER MODULE H5350(SERVICE) 8 75.88T02G001 ASSY OSRAM LAMP DRIVER O6 MIC 180W 9 75.88T05G001 ASSY INTERRUPT SWITCH MODULE XD1130 10 85.1A126G060 SCREW PAN MECH M3*6 11 85.3A122G040 SCREW CAP MECH M2*4 NI
Parts Supply
NO NO NO NO NO NO NO NO
H5350
Confidential
13
10
H5350
Confidential
IV
Item 1 2 3 4 5 6 7 8 9 10 11 12 13
P/N 70.89T11GR01 41.82G03G001 70.89T12GR01 41.82K11G001 41.83F21G001 41.88T02G001 41.89B01G001 51.88T04G011 51.88T17G001 51.89T02G001 51.89T05G001 51.89T06G001 52.88T06G001 61.89T01G001 80.89T01G001
Description PCBA MAIN BD MODULE FOR H5350(SERVICE) EMI GASKET USB CONNECTOR EP719 ASSY I/O COVER MODULE H5350(SERVICE) EMI GASKET W6*H1*L190mm GASKET h?/W*5, H*1.5, L*15 EMI GASKET L180*W4*H1 EMI TAPE L*190/W*13 IO COVER H5350 MYLAR MB SHELDING X1160 MB SHELDING MYLAR H5350 M/B SHIELDING MYLAR FOR H5350 M/B CNNT MYLAR H5350 SPONGE CR4305 BACK MB SHELDING X1160 MAIN-BD SHIELDING H5350 PCBA MAIN BOARD FOR H5350
Parts Supply NO NO NO NO NO NO NO NO NO NO NO NO NO
H5350
Confidential
Item 1 2 3 4 5 6 7
Description ASSY COLOR WHEEL MODULE H5350(SERVICE) YO R90Y35G90C35W28B82 6 SEGMENT CW TAPE 3M J350 10*5mm FOR COLOR WHEEL COLOR WHEEL DISC RUBBER , EzPro755 COLOR WHEEL SHOULDER SCREW NICKEL M2*4.8 COLOR WHEEL HOLDER SECC,X15 PCBA PHOTO SENSOR BOARD FOR PD7280 SCREW PAN MECH M2.6*4 Ni
Parts Supply NO NO NO NO NO NO
H5350
Confidential
VI
H5350
Confidential
VII
Item 1 2 3 4
P/N 41.82B01G001 41.89B02G001 51.81540G001 51.81541G001 70.89T14GR01 51.88T02G011 51.88T14G001 51.88T21G001 51.89T02G001 51.89T03G001 52.86801G011 52.88T04G001 61.88T03G011 70.89T06G001 85.1A123G060 86.00122G015
5 6 7 8 9 10 11 12 13 14 15
Description EMI GASKET W13*H10.5*L30mm EMI TAPE W*20/L*70 TAPE 3M J350 17*60mm TAPE 3M J350 17*30mm ASSY BOTTOM COVER MODULE H5350(SERVICE) BOTTOM COVER H5350 ROD DUCT X1160 MYLAR K-LOCK 0.25t X1160 MB SHELDING MYLAR H5350 LVPS MYLAR H5350 RUBBER FOOT REAR GRAY H5350 BOTTOM SHELDING AIR TIGHT X1160 SHIELDING BOTTOM COVER FOR X1260 ASSY ADJUST FOOT MODULE WHITE H5350 SCREW PAN MECH M3*6 NI NUT HEX M2.0*0.4P L15 Ni
Parts Supply NO NO NO NO
NO NO NO NO NO NO NO NO NO NO NO
H5350
Confidential
VIII
H5350
Confidential
IX
Item
1 2 3 4 5 6 7
Description ASSY TOP COVER MODULE H5350(SERVICE) TOP COVER,PC-MN3600H,WHITE H5350 LENS POWER X1160 IR CAP,WHITE H5350 TRACK REMOTE CONTROLLER,WHITE TRACK REMOTE CONTROLLER-2,WHITE Screw Pan M2.6x6 Ni KEYPAD POWER H5350
Parts Supply
NO NO NO NO NO NO NO
H5350
Confidential
13 28 24 11 10 30 5 29
8 33 12 9 18 6 1 15
14
27
25
19
2 3 26
32
17 20 17
7
H5350 Confidential XI
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
P/N 11.009F0G007 70.89T10GR01 23.88N06G001 23.88N20G001 23.88N20G011 23.89L01G001 41.82B01G001 41.85W05G001 48.86N01G003 51.00210G001 51.89B01G001 51.89B04G001 51.89F02G001 51.89T01G001 52.80J01G001 52.87319G001 61.80J10G001 61.82B36G011 61.88611G001 61.88N12G001 61.89630G001 61.89F01G001 61.89F02G001 61.89F04G011 70.89F04G001 70.89F05G001 70.89F15G001 70.89T04G001 85.1A526G060 85.4A121G065 87.FL000G003 51.88N43G001 51.88N41G001 80.89T02G001
Description CNNT F 203P FOR 720P LGA DMD SOCKET ASSY ENGINE MODULE H5350(SERVICE) YO PLASTIC RELAY FOR X15 YO CONDENSER1 FOR X15 YO CONDENSER2 FOR X15 PROJECTION LENS YM09W EMI GASKET W13*H10.5*L30mm EMI GASKET W8*H8*L45 DMD 1280x720 PIXEL 0.62 720P LVDS DMD SCREW WASHER A39 HOLDER ZOOM RING X1260 ZOOM RING X1260 DMD INSULATION PC A15 FOCUS RING H5350 DMD ANTIDUST RUBBER 739 SILICONE RUBBER DMD THERMAL PAD 18*13*0.5t DMD LIGHT MASK 739 SUS301 SCREW M3*10.5*6 IHSPC DMD SCREW Ivy10X ROD SPRING SUS301,X15 DP759 HEATSINK SPRING DMD PLATE AL A39 ROD COVER SUS304 0.25t 1/2H HD65 DMD HEATSINK AL H5350 PRE ASSY ENGINE BASE HD65 ASSY ROD MODULE HD65 ASSY ENGINE BOTTOM COVER HD65 ASSY COLOR WHEEL MODULE H5350 SCREW PAN MECH M2.6*6 Ni NYLOK SCREW FLAT HEAD TAP M1.7*6.5 WSHR FLAT 5.0*2.4*0.3 MYLAR MYLAR FOR RELAY BOTTOM MYLAR FOR MIRROR DEAMETER 3.5mm PCBA DMD BOARD FOR H5350
Parts Supply
NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
H5350
Confidential
XII
3 13
30
9
24 17 31 26 21 22 23 15
32
5
19
12
16
2
25
29
18
27
14
1
10
11
8
4
20
H5350
Confidential
XIII
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
P/N 41.83F21G001 41.85A01G001 41.88T01G001 49.89B01G001 51.81540G001 51.88T19G001 51.88T20G001 51.89B05G001 51.89T08G001 52.89B02G001 52.89B03G001 61.87340G001 61.88T02G001 61.88T09G001 61.88T15G001 70.86L05G001 70.89T01G001 23.89L01G001 70.89T03G001 70.89T05G001 70.89T07G001 75.87J01G201 75.89T01G001 85.1A123G060 85.1A126G060 85.1A326G060 85.1C123G060 85.1C224G051 85.3A113G050 85.ZA123G040 42.00455G002 49.86E02G001
Description GASKET h?/W*5, H*1.5, L*15 EMI GASKET / 10*27*20 EMI ? L85*W20 SPEAKER 2W 80HM NEOSONICA DAB128 300mm TAPE 3M J350 17*60mm MYLAR TOP SHELDING X1160 MYLAR LENS X1160 HOLDER SPEAKER X1260 TOP SHIELDING MYLAR FOR H5350 SPONGE ML32 SPEAKER X1260 SPONGE SRS-48P SPEAKER X1260 STAND OFF M3*4L D8.0 2100MP SHELDING TOP COVET X1160 BRKT INLET X1160 ACER LOGO FOR X1160 ASSY BLOWER FAN MODULE XD1250 ASSY TWO FAN SHIELDING X1260 PROJECTION LENS YM09W ASSY MAIN BD MODULE H5350 ASSY HOUSING MODULE H5350 ASSY LAMP DRIVER MODULE H5350 ASSY LVPS MATRITEK 200W EP752(2ndu) ASSY FRONT COVER H5350 SCREW PAN MECH M3*6 NI SCREW PAN MECH M2.6*6 Ni SCREW PAN HEAD MECH M2.6*6 BLACK SCREW PAN MECH W/T M3*6 NI SCREW PAN MECH M4*5 COLOR W/TOOTH STEP SCREW 3.5xH2.5 M3x5.0mm Ni SCREW WCH/W MECH M3*4 Ni GREEN W.A. 8P TO 16P 120mm MB TO LVPS H5350 SUNON, GB1245PKV1-8 45*20mm BLOWER
Parts Supply NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
NO NO NO NO NO NO NO
H5350
Confidential
XIV
A.K. H5350
2 8 3 4 7 5 6 9
10
H5350
Confidential
XV
Item 1 2 3 4 5 6 7 8 9 10
P/N 35.82001G111 36.00006G031 36.00027G001 36.00029G001 36.88T02G001 36.89T01G001 42.00232G001 42.83M08G001 45.88T02G001 51.86213G002
Description AK LABEL 3*3 BLANK WARRANTY CARD ,EUROPE FOR ACER SERVICE STATION CARD SECURITY CARD FOR ACER QUICK START CARD MULTILINGUAL ACER X1160/X1260 SERIES USERS GUIDE MULTILINGUAL (CD) ACER H5350 CABLE COMPOSITE VIDEO 2M YELLOW CABLE VGA 1.8M 15P BLUE 2400MP REMOTE CONTROLLER X1160+ Bontech X2(WHITE) PE BAG ZIPPER #9 W/RECYCLING MARK FOR OPTOMA
Parts Supply NO NO NO NO NO NO NO NO
NO
H5350
Confidential
XVI
D.C. H5350
8 7 1 2 6 5 9 3 4
H5350
Confidential
XVII
Item 1 2 3 4 5 6 7 8 9
P/N 35.89T01G001 35.89T02G001 70.89T17GR01 51.88T05G011 61.00061G001 61.88T17G001 SP.88T01GC01 70.88T02G001 70.89T02G001 75.88T03G022 85.1A323G080
Description IO MYLAR FOR H5350 LOGO MYLAR FOR H5350 ASSY LAMP COVER MODULE H5350(SERVICE) LAMP COVER H5350 LOCK SCREW PAN MECH M3*8.5-3.5 Ni AL FOIL FOR LAMP COVER X1160 LAMP MODULE FOR PROJECTOR X1160/1260 ASSY LAMP MODULE X1160 ASSY BOTTOM HOUSING MODULE H5350 BUY ASSY TOP COVER ADD PAINT H5350 SCREW PAN MECH M3*8 BLACK GREEN
Parts Supply NO
NO NO NO NO NO NO NO
H5350
Confidential
XVIII
D.P. H5350
7 4 14 9 16 8 13 12 5 6 11 17 2 18 19 15 3 1
10
H5350
Confidential
XIX
Item 1 2 3 4 5 6 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
P/N 35.00029G001 35.52302G091 35.82V02G001 35.86301G001 51.00200G001 51.00201G001 51.52109G003 53.88T01G001 55.87202GC01 55.87W04G001 55.88T02G001 55.89T01G001 56.88T03G001 56.88T04G001 57.00001G001 58.86201GC02 58.86202G001 75.88T06G002 AK.89T01G001 DC.89T01G001 42.00120G011 42.00110G011 42.00131G011
Description Parts Supply ACER TAPE 45M FOR CARTON NO LABEL CARTON 108*92 BLANK NO LABEL CARTON(SEAL) 110*50mm PD120 NO SPEC LABEL BLANK PD120 NO HANDLE BAR 2. PE HD70 NO HANDLE BAR 1.PE HD70 NO PE BAG 450*350*0.07 FOR OPTOMA NO SOFT CARRY BAG X1160 NO BOTTOM PAPER COVER PLATE 1230*1000*4mm NO 3200MP CORNER PAPER P5271 NO CENTER PAPER BOX X1160 NO CARTON CARRY BOX H5350 NO AIR BAG TOP X1160+ NO AIR BAG BOTTOM X1160+ NO PACK SIO2 DRIER 20g NO WOOD PALLET 48*40*5(DOUBLE FACE) FOR NO CPC (MATERIALl PINE) COVER PALLET 1240*1020mm FOR EzPro 736 NO ASSY LENS CAP X1160 A.K. H5350 NO D.C.H5350 NO CABLE POWER CORD 1.8M SP-023/IS-14 EUROPE DIS-WARNING LABEL CABLE POWER CORD 1.8M SP-60/IS-14 UK DISWARNING LABEL CABLE POWER CORD 1.8M SP-027/IS-14 SWITZERLAND DIS-WARNING LABEL
H5350
Confidential
XX
Appendix B
I. Serial Number System Definition
Serial Number Format for Projector
00J6601000
1
751 00001 59
2 3 4
10
5
1 2 3 4 5
: : : : :
00J6601000 = Part Number excluded dot 751 = Week Code(ex:2007 = 7,the fifty-one weeks of the year = 51) 00001 = Serial Numbers 59 = Manufacturing Code 10 = Eng. Version Code
H5350 Confidential
XXI
II. A
1
XXXXXXXXXXX
3
CC XXX
4 5
EEEE
6
1 2 3 4 5 6
: : : : : :
H5350
Confidential
XXII