Beruflich Dokumente
Kultur Dokumente
cell parameters defined in 2G side should be correct (LAC,PSC,RNC) *may be the threshold or parameters are set wrong check (FDDQmin(dB),FDDQoffset, 2G-3G inter-rat enabled switch(sholud be on),Q_search_I(should be always search for 3G ngbr) ) also check if the 3G cell is barred or not hope it help you Regards
CELLCCUTRANSYS FDD Qmin 3 CELLCCUTRANSYS Qsearch I 7 CELLCCUTRANSYS Qsearch P 7 CELLCCUTRANSYS FDD Q Offset 0 CELLCCUTRANSYS Qsearch C 15 CELLCCUTRANSYS 3G Search PRIO Yes CELLHOBASIC Inter-RAT Out BSC Handover Enable CELLHOBASIC Inter-RAT In BSC Handover Enable CELLHOBASIC Inter-RAT Cell Reselection Enable
You should modify some parameter and declare 3G cell as a neighbor on 2G cell Best wishes check QSI,QSC parameter most probably they are not correct