Beruflich Dokumente
Kultur Dokumente
Due: 8:00am on Friday, February 10, 2012 Note: To understand how points are awarded, read your instructor's Grading Policy.
What is the current passing between the electrodes? Hint A.1 General considerations on ionic solutions Hint not displayed Hint A.2 Find the current due to the positive ions Hint not displayed Express your answer in milliamperes to three significant figures. ANSWER: 10.6 Correct Part B What is the direction of the current in the ionic solution? Hint B.1 Conventional direction of current Hint not displayed ANSWER: away from the negative electrode toward the negative electrode Correct
A Stretchable Resistor
A wire of length and cross-sectional area has resistance . Part A What will be the resistance of the wire if it is stretched to twice its original length? Assume that the density and resistivity of the material do not change when the wire is stretched. Hint A.1 Formula for the resistance of a wire Hint not displayed Hint A.2 Find the cross-sectional area of the stretched wire Hint not displayed Express your answer in terms of the wire's original resistance . ANSWER: =
Correct
same diameter? The resistivity of aluminum is Hint B.1 How to approach the problem Hint B.2 Resistivity defined
Hint not displayed Hint not displayed Express your answer in newtons per coulomb. Use three significant figures. ANSWER: 9.90102 = Correct Part C What electric field would have been required to create a current of 30.0 amperes in a copper "gauge 10" wire with diameter equal to 0.259 centimeters? Express your answer in newtons per coulumb. Use three significant figures.
ANSWER: Part D
9.80102 = Correct
The resistance of a copper "gauge 10" jumper cable with diameter length of the cable. Hint D.1 Resistance defined Hint not displayed Express your answer in meters. Use three significant figures. ANSWER: 3.80 = Correct
Exercise 25.12
A copper wire has a square cross section 2.5 The density of free electrons is Part A . on a side. The wire is 4.4 long and carries a current of 3.9 .
Find the magnitude of the current density in the wire. Express your answer using two significant figures. ANSWER: 6.2105 = Correct Part B Find the magnitude of the electric field in the wire. Express your answer using two significant figures. ANSWER: 1.1102 = Correct Part C How much time is required for an electron to travel the length of the wire? Express your answer using two significant figures. ANSWER: 9.6104 = Correct
To which two faces of the block should the potential difference be applied to give the maximum current density? Hint A.1 Calculate the current density in a rectangular block of metal Hint not displayed ANSWER: to the faces that are a distance apart to the faces that are a distance apart
apart
What is the maximum current density from Part A? Hint B.1 How to approach the problem Hint not displayed Express your answer in terms of some or all of the variables , (the resistivity of the material), and . ANSWER: = Correct Part C To which two faces of the block should the potential difference be applied to give the maximum current? Hint C.1 Calculate the current in a rectangular block of metal Hint not displayed ANSWER: to the faces that are a distance apart to the faces that are a distance to the faces that are a distance Correct Part D What is this maximum current? Hint D.1 How to approach the problem Hint not displayed Express your answer in terms of some or all of the variables , (the resistivity of the material), and . ANSWER: = Correct apart apart
Hint not displayed Hint A.2 Definition of resistivity Hint not displayed Hint A.3 Find the current density Hint not displayed Expess your answer in terms of the given quantities. ANSWER: Correct Part B The rod is now stretched so that its length is doubled. If the electric field remains the same, what is the new current in the rod? Hint B.1 How to approach the problem Hint not displayed Express your answer in terms of some or all of the quantities given in the problem introduction. ANSWER: = Correct Part C A piece of copper is made into a rod with a square cross-section. The side of the square is 2.00 centimeters. The resistivity of copper is . An unknown electric field , directed along the rod, creates a current of 12.0 amperes through the rod. Find the magnitude of . Hint C.1 How to approach the problem Hint not displayed Hint C.2 Definition of resistivity Hint not displayed Use two significant figures in your answer. Express your answer in newtons per coulomb. ANSWER: 5.10104 = Correct
Problem 25.58
A 2.0- length of wire is made by welding the end of a 120- -long silver wire to the end of an 80- -long copper wire. Each piece of wire is 0.60 in diameter. The wire is at room temperature. A potential difference of 5.0 is maintained between the ends of the 2.0- composite wire. Part A What is the current in the copper section? Express your answer using two significant figures. ANSWER: 45 = Correct Part B What is the current in the silver section?
Express your answer using two significant figures. ANSWER: 45 = Correct Part C What is the magnitude of in the copper? Express your answer using two significant figures. ANSWER: 2.8 = Correct Part D What is the magnitude of in the silver? Express your answer using two significant figures. ANSWER: 2.3 = Correct Part E What is the potential difference between the ends of the silver section of wire? Express your answer using two significant figures. ANSWER: 2.8 = Correct
Problem 25.66
The region between two concentric conducting spheres with radii and is filled with a conducting material with resistivity . Part A Find the resistance between the spheres. Express your answer in terms of the variables , , and appropriate constants. ANSWER: = Correct Part B Derive an expression for the current density as a function of radius, in terms of the potential difference between the spheres. Express your answer in terms of the variables , , , , and appropriate constants. ANSWER: = Correct Part C Show that the result in part (a) reduces to the equation when the separation between the spheres is small. Essay answers are limited to about 500 words (3800 characters maximum, including spaces). ANSWER: My Answer: