Sie sind auf Seite 1von 2

I2C ADC 8 Channel Wireless Sensor Data Acquisition & Transmission Based On ARM

ABSTRACT
Wireless sensor network technology is very suitable for distributed data collecting and monitoring in tough environments. This project concentrates on development of an embedded wireless sensor data acquisition and transmission system. Most of the industrial applications use analog sensors with transmitters for sensing the process parameters. The benefits of digital technology in the vast world of analog sensors can be implemented by the development of appropriate multi sensor embedded system. The system consists of an I2CADC interfaced to microcontroller through an I2C bus which has only two lines namely serial data line (SDA) and serial clock line(SCL).Each device connected to the bus is software addressable by a unique address and simple master/slave relationship exists at all times. The micro controller A/D converter performs periodic scan of these sensors and maintains a complete database of the physical parameters. The transmitter system consists of an encoder which takes parallel data from micro controller and transmits serial data wirelessly to remote system using RF technology. And receiver system containing the RF receiver receives serial data and the decoder converts the serial data into parallel data and fetches it to the micro controller unit .All parameters values are displayed on LCD unit using LCD interface.

This proposed research work would be implemented using embedded system design methodology, which includes Embedded hardware and firmware design modules. This project would be carried out with LPC2148 ARM Micro controller and industry driven Embedded EDA Tool kits.

Block Diagram:

Embedded EDA Tools: Micro-Vision IDE, Real view C Cross Compiler, Real Time Library for ARM, software Hardware simulators, HEX converter, LPC2000 Flash Programmer,ORCAD for schematic design. Languages: Embedded C for 8051 family Microcontrollers. Hardware Modules: LPC-2148 ARM7, ST-0801 ARM Board ,LCD, Encoder, Decoder, RF transmitter, RF receiver. Applications: 1.Various Materials sensor wireless data processing system(Uranium, Nickel etc). 2. Environmental, Patient data capturing and transmission Embed systems. 3. Image, audio, and text information wire less processing & transmission.

Das könnte Ihnen auch gefallen