Beruflich Dokumente
Kultur Dokumente
22/03/2012
Impeller description: Diameter: No. of blades: Hub size: Blade profile: Rotation direction: Pitch angle: Blade material: 650 mm 5 5 K6Z L 30 PAG General: Application: Drive type: Stationary cooler Combustion engine Application data: Installation: Tip clearance: Rpm: Temperature: Altitude: Air density: Orifice plate 1% 1.500 min- 20 C 0m 1,2 kg/m
Simulation:
none
Impellers: No. No. No. No. No. 1: 2: 3: 4: 5: 650/5-5/K6ZL/30/PAG @ 1.500 min- 650/3-3/K6ZL/20/PAG @ 1.500 min- 650/3-3/K6ZR/20/PAG @ 1.500 min- 650/3-3/K6ZL/25/PAG @ 1.500 min- 650/5-5/K6ZR/30/PAG @ 1.500 min-
Operating point impeller No. 1 : Air flow: Static pressure: Power: Efficiency:
pst (4)
pst=Static pressure
Pw=Power consumption
2010 WingFan
Remarks: Direct assembly on the crank shaft is not admissible. An appropriate isolation is to be provided.
Tel: +49 (0)40 853 109 - 10 Fax: +49 (0)40 853 109 - 99
info@wingfan.com www.wingfan.com
Simulation:
none
Impeller: 650/5-5/K6ZL/30/PAG
Impeller Diameter range: Temperature range: Tip-speed: Max. tip-speed (20 C): Air velocity: Torque: Moment of inertia: Axial thrust: Performance/blade: Weight (approx.): Hub Bearing surface : Total thickness: Outer diameter: Blade v: h: v1: h1: 18 49 29 50 mm mm mm mm 71,3 mm 7 mm 158 mm 319 - 1.021 -40 - 110 51,1 110 mm C m/s m/s m/s Nm 0,04906 kgm N W 2,3 kg
2010 WingFan
Remarks: Direct assembly on the crank shaft is not admissible. An appropriate isolation is to be provided.
Tel: +49 (0)40 853 109 - 10 Fax: +49 (0)40 853 109 - 99
info@wingfan.com www.wingfan.com