Beruflich Dokumente
Kultur Dokumente
The patient monitoring systems is one of the major improvement in the hospitality because of its advanced technology. A wireless patient monitoring system to measure heartbeat, body temperature and respiration by using embedded technology.
In general, a compact sensor, is used to monitor the heartbeat in analog form and to check the condition of the patient we required some more components such as thermometer and respiration. So we are here, just connected the temperature sensor and heartbeat sensor so that simultaneously we can monitor the patients condition. An embedded technology is used instead of dsp technology to develop this system so that it is easy to operate and available at an affordable cost.
There are some systems present in the market but all are having some difficulties
Compact sensor
Digital Heartbeat monitor
Embedded technology is to be use so that we can monitor the patient condition easily.
An advanced technique WIRELESS PATIENT MONITORING SYSTEM FOR HEARTBEAT ,BODY TEMPERATURE AND RESPIRATION is used.
There are mainly two parts of the system one is transmitter and the other one is receiver. The transmitter is placed near the patient and the receiver is with the specialist doctor. So when there is any abnormality in the patients condition then he can monitor the situation.
RS232 Interface
Microcontroller Board
Body Temperature
Relay Drivers
Resp Temperature
Receiver
Heartbeat Sensor
There are mainly two parts of the system one is transmitter and the other one is the receiver In the transmitter, We have Heartbeat sensor, Respiration sensor and the temperature sensor. All the sensors are connected to the patient The microcontroller monitors the all the system in the transmitter if any abnormality in the patient condition then it sends the signal so that the receiver will capture the signal and will work according to that.
Here
ECG
PULSE
The electrical activity is generated based on that the specialist can treat.
The heart beat is measured when the blood passes from the heart to the other parts of the limbs once per beat.
The physician looks for the pulse on the wrist of the patient
Thermistors
Resistance thermometers.
DESIGN OF A MICROCONTROLLER
The Microcontroller that is used in this system is AT89C51 manufactured by Atmel, MC, USA.
Full Duplex UART 8 Bit CPU optimized for control applications
The Microcontroller provides internal 256 bytes of RAM. Theses 256 bytes of internal RAM.
Input/Output port
Our system
72
87 90 72 103
Differenc e
-4
-7 -6 14 -1
76
94 96 86 104
The staying of specialist is eliminated. It is a multipurpose so that overall conditions are easily measured. Easy to operate. Compare with compact sensor it gives better performance.
Modern technologies have developed that promotes comfortable and better life which is disease free. PREVENTION IS BETTER THAN CURE This system is intelligent than previous systems.
Multiple parameters like Blood pressure, retinal size, age and weight can be included as controlling parameters in the future. This system also developed by using Bluetooth technology in future.
On different conditions
Abnormalities
Thank you