Beruflich Dokumente
Kultur Dokumente
1 of 9
03/04/12
Access to the Civil symbols can be gained through the SCECO CAD Standards dialog box and slam-down menus. There are two options available : 1) 2) Select the Main option to access the Civil palette from which all the symbols can be obtained. Select one of the sub-palettes from the slam-down list to access specific symbols directly.
Miscellaneous symbols
CIVIL:P1
- Main palette
a)
b)
c)
d)
3 of 9
e)
Place Straight Arrow ( shaded=road ; unshaded=pavement ) Command : Does not trim line; does not rotate cell
f)
Place Turn ( left / right ) ( shaded=road ; unshaded=pavement ) Command : Does not trim line; does not rotate cell
h) Place Straight / Turn ( left / right ) ( shaded=road ; unshaded=pavement ) Command : Does not trim line; does not rotate cell
i)
Place Straight / Turn left and right ( shaded=road ; unshaded=pavement ) Command : Does not trim line; does not rotate cell
j)
Place Turn ( left / right ) ( shaded=road ; unshaded=pavement ) Command : Does not trim line; does not rotate cell
4 of 9
03/04/12
a) b)
Place Single post road sign command : Does not trim line; does not rotate cell Place Double posted road sign command : Does not trim line; does not rotate cell Place Triple posted road sign command : Does not trim line; does not rotate cell Place Road parking block command : Does not trim line; does not rotate cell Place Director of span, floor or roof structure command : Does not trim line; does not rotate cell
c) d)
e)
5 of 9
03/04/12
a)
Place W shapes command : Input X size; Y size Place S shapes command : Input X size; Y size Place Channels American standard command : Input X size; Y size Place Angles command : Input X size; Y size Place Structural Tees ( cut from S shapes ) command : Input X size; Y size Place Structural Tees ( cut from W shapes ) command : Input X size; Y size Place Double angles command : Input X size; Y size
b)
c)
d)
e)
f)
g)
Combination sections include - S shapes and channels - W shapes and channels - Two channels - Channels and angles ; long leg of angle turned out - W shapes and channels - Channels and angles ; short leg of angle turned out ) h) Place Structural tubing - include square and rectangular options in Command : manual Input X size; Y size
7 of 9
03/04/12
a) b)
Place Arrow custom line Place Square weld command : Does not trim line; does not rotate cell c) Place Scarf weld command : Does not trim line; does not rotate cell Place V weld command : Does not trim line; does not rotate cell e) Place Bevel weld command : Does not trim line; does not rotate cell Place U weld command : Does not trim line; does not rotate cell
d)
f)
g)
Place J weld command : Does not trim line; does not rotate cell Place Flare - V weld command : Does not trim line; does not rotate cell
h)
i)
8 of 9
j)
Place Fillet weld command : Does not trim line; does not rotate cell Place Plug or slot weld command : Does not trim line; does not rotate cell Place Backing weld command : Does not trim line; does not rotate cell Place Spot or projection weld command : Does not trim line; does not rotate cell Place Seam weld command : Does not trim line; does not rotate cell Place Back weld command : Does not trim line; does not rotate cell Place Spacer weld command : Does not trim line; does not rotate cell Place Field weld command : Does not trim line; does not rotate cell Place Weld all around command : Does not trim line; does not rotate cell Place Flush line ( fixed length ) command : Does not trim line; does not rotate cell Place Convex command : Does not trim line; does not rotate cell
k) l) m) n) o) p) q) r) s) t)
9 of 9
03/04/12