Beruflich Dokumente
Kultur Dokumente
Kinetic pumps adds energy to the fluid when it is accelerated with the rotation of an impeller.
Stream Pumps
Stream pumps are composed with a centrifugal Pump connected with a fluid stream or an ejector assembly. Esta imagen es un GIF no se si puedes aadirla, o sino pues as tal cual no importa http://wwwdi.ujaen.es/~lina/webpeter/Nuevasimag/ecfun/PUMPJET.GIF
Tipes of Impellers
Submersible Pumps
Theyre designed specifically to be underwater, the whole centrifugal pump is submersible, the drive motor suction and the discharge devices.
Has a big entrance chamber which keeps larges amount of fluid during the periods when its off, when the drive turns on it start to suck up air from the suction pipe to the casing, a certain amount of water that is pumped is recirculared in order to maintain the pumping action.
The suction from the pump is at the bottom, in this place the water flows from a filter to the impeller which is resistant to abrasion, The discharge flows upwardly thought an annular passage between the core and the motor casing. Top of the unit, the flow is collected and flows into a discharge pipe or hose that is located in the center of the pump.
Pumps equipped with a flotation system which acts automatically to control the fluid level in the tank
Capacity
Power