Beruflich Dokumente
Kultur Dokumente
Total 31 pages
2009-12-28
2012-6-19
Huawei Confidential
Page 1 of 14
Change History
Date 2009-9-28 2009-12-28 2010-1-26 Revision V1.0 V1.1 V1.2 Description Completed the initial draft. Added other contents. Modified according comments. to the review Author BTS3900 development team BTS3900 development team BTS3900 development team
2012-6-19
Huawei Confidential
Page 2 of 14
INTERNAL
Contents
1 Feature Description of the MRFU V2................................................4
1.1 Development Background.......................................................................................................................................4 1.2 Specifications...........................................................................................................................................................4 1.2.1 Expanded Instantaneous Bandwidth..................................................................................................................4 1.2.2 Enhanced Frequency Bands...............................................................................................................................7 1.2.3 Enhanced Power Capability...............................................................................................................................8 1.3 Functions of the MRFU V2...................................................................................................................................12 1.3.1 Inter-Module Power Sharing...........................................................................................................................12 1.3.2 Inter-Module RF Frequency Hopping.............................................................................................................12
2 Data Configuration of the MRFU V2...............................................13 3 Versions Related to the MRFU V2...................................................14
2012-6-19
Huawei Confidential
Page 3 of 14
INTERNAL
1
1.2 Specifications
Setting rules: If the Configure Check Threshold or Not parameter is set to NO for the MRFU, the MOD BTSBRDCAP command is used. If the Configure Check Threshold or Not parameter is set to YES for the MRFU, the MOD BTSRXUBRD command is used. You can query the RX and TX bandwidths supported on the BSC by running the LST BTSBRDCAP command. The bandwidth specifications of the MRFU V1 are supported on the BSC6900 by default, as shown in 2.
2012-6-19
Huawei Confidential
Page 4 of 14
INTERNAL
After the MRFU V2 is added, the bandwidth setting policy varies with the type of the MRFU.
The TRX bandwidth setting function is a new function of the BSC6900. If the MRFU V2 is used under the BSC6000, you do not need to set the TRX bandwidths.
Index in the MOD BTSBRDCAP command must correspond to Board Type. For details, see 2.
2012-6-19
Huawei Confidential
Page 5 of 14
INTERNAL
The bandwidth ranges of many operators exceed the preceding ones. In this case, the downlink intermodule RF frequency hopping function can be enabled to support the large bandwidth ranges. For details, see section 1.3.2.
2012-6-19
Huawei Confidential
Page 6 of 14
INTERNAL
1800 MHz L60 GRFU V2 1800 MHz H60 GRFU V2 CMCCspecific 25 MHz GRFU V2 900 MHz PGSM GRFU V2 900 MHz EGSM GRFU V2 T-GSM 810 GRFU V2
19.8 MHz
99
59.8 MHz
299
19.8 MHz
99
34.8 MHz
174
19.8 MHz
99
34.8 MHz
174
19.8 MHz
99
34.8 MHz
174
19.8 MHz
99
34.8 MHz
174
19.8 MHz
99
Table 1.2 Frequency bands supported by the MRFU (GRFU) V2 Sub-band of the GRFU V2 DCS 1800 L60 DCS 1800 H60 P-GSM 900 E-GSM 900 L25 RX Frequency Band (MHz) 1710 1725 890 880 1770 1785 915 905 TX Frequency Band (MHz) 1805 1820 935 925 1865 1880 960 950 Frequency Range 512-810 587-885 1-124 0-74, 975-1023
2012-6-19
Huawei Confidential
Page 7 of 14
INTERNAL
Sub-band of the GRFU V2 E-GSM 900 M25 E-GSM 900 T-GSM 810
Step 2 Enter SET BTSPSUFP, and then select GSM Multi Carrier BTS Standard based on the actual scenario, as shown in 2.
For the standards in different scenarios, see Table 1-3 and Table 1-4.
2012-6-19
Huawei Confidential
Page 8 of 14
INTERNAL
Step 3 Enter ACT BTS to activate the BTS and complete the configuration of power capability, as shown in 3. Figure 1.5 Activating the BTS
1. Table 1-3 lists the maximum power value (in the case of excessive configuration) that can be configured for each TRX in different scenarios. 2. Table 1-4 lists the maximum power value (in the case of non excessive configuration) that can be configured for each TRX in different scenarios. 3. The PA capability in the case of non excessive configuration refers to the maximum power supported by a single module. The power sharing and excessive configuration are defined as follows: 1. In single-PA power sharing mode, the TRXs in one MRFU share power. 2. In double-PA power sharing mode, the TRXs in two MRFUs share power. Before enabling the doublePA power sharing function, you must configure inter-module power sharing. For details, see section 1.3.1 "Inter-Module Power Sharing." 3. Excessive configuration means that the static power configured for the TRX exceeds basic specifications of power in the case of non excessive configuration. Description of power configuration 1. When the power sharing function is disabled on the BSC, you are advised to configure power based on the power specifications in the case of non excessive configuration (see Table 1-4).
2012-6-19
Huawei Confidential
Page 9 of 14
INTERNAL
2. When the power sharing function is enabled on the BSC, you are advised to configure power based on the power specifications in the case of excessive configuration (see Table 1-3).
Table 1.1 Power specifications of the MRFU (GRFU) V2 in the case of excessive configuration Scenario Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards in the Case of Excessive Configuration Number of TRXs Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards 60 40 31 27 20 20 31 27 27 20 20 20 20 PA Capability in the Case of Non Excessive Configuration Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard in the Case of Excessive Configuration Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard PA Capability in the Case of Non Excessive Configuratio n
Single module
1 2 3 4 5 6
60 80 80 80 80 80 80 80 80 80 80 80 80
40 40 31 27 16 16 31 27 27 16 16 16 16
80 80 80 80 60 60
Two modules (two modules are combined and intermodule power sharing is not configured ) Double-PA power sharing for two
6 7 8 9 10 11 12
9 10 11
25 25 25
80 80 80
20 20 16
2012-6-19
Huawei Confidential
Page 10 of 14
INTERNAL
Scenario
Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards in the Case of Excessive Configuration 12 25 80
Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard in the Case of Excessive Configuration 16
Table 1.2 Power specifications of the MRFU (GRFU) V2 in the case of non excessive configuration Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards in the Case of Non Excessive Configuration Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard in the Case of Non Excessive Configuration Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard 40 40 27 20 12 10 27 27 20 20 12 12 PA Capability in the Case of Non Excessive Configuration
Number of TRXs
Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards 60 40 27 20 16 12 27 27 20 20 16 16
Single module
1 2 3 4 5 6
60 80 80 80 80 72 80 80 80 80 80 80
80 80 80 80 60 60
Two modules
5 6 7 8 9 10
2012-6-19
Huawei Confidential
Page 11 of 14
INTERNAL
Power Specification of the MRFU (GRFU) V2 Complying with Class 1 and Class 2 Standards in the Case of Non Excessive Configuration
Power Specification of the MRFU (GRFU) V2 Complying with the Class 0 Standard in the Case of Non Excessive Configuration 10 10
11 12
12 12
72 72
2012-6-19
Huawei Confidential
Page 12 of 14
INTERNAL
2
1. 2. Number TRXs
For GBTS8.1 plug-and-play scenarios, GBTS9.0 plug-and-play scenarios, and GBTS9.0 new scenarios, the data configuration is described as follows: If both the MRFU V1 and the MRFU V2 are configured in a cell, the MRFU V2 must be configured on the basis of the power specifications of the MRFU V1. If only the MRFU V2 is configured in a cell, the power specifications of the MRFU V2 are used. For the MFRU V1, the old power specifications can be configured. For the MFRU V2, the new and old power specifications can be configured. Table 4-1 lists power specifications.
Table 2.1 Power specifications of the GSM TRX of Power Specification of the MRFU Complying with the Class 0 Standard (Old) 31 31 20 16 NA NA Power Specification of the MRFU Complying with the Class 0 Standard (New) 40 40 31 27 16 16 Power Specification of the MRFU Complying with Class 1 and Class 2 Standards (Old) 60 40 27 20 12 10 Power Specification of the MRFU Complying with Class 1 and Class 2 Standards (New) 60 40 31 27 16 12
1 2 3 4 5 6
3.
The MFRU V1 complying with the Class 0 standard supports four TRXs, and the MFRU V2 supports six TRXs.
2012-6-19
Huawei Confidential
Page 13 of 14
INTERNAL
3
Product Name BSC6000 BTS
This chapter describes GBTS products and related versions. Table 1.1 GBTS8.1 products and related versions Software Version BSC6000V900R008C12B195 and later versions BTS3900 GSM V300R008C11SPC039 and later versions Description
When the versions of the BTS and BSC meet version requirements, the BTS supports the MRFU V2 and its related configurations.
Table 1.2 GBTS9.0 products and related versions Product Name BSC6900 BTS Software Version BSC6900V900R011C00SPC710 versions BTS3000V100R009C00SPC068 versions and and later later Description
When the versions of the BTS and BSC meet version requirements, the BTS supports the MRFU V2 and its related configurations.
If the BTS version is BTS3000V100R008C11 or BTS3000V100R009, 1. 2. and the BSC version does not meet the version requirements in Table 5-1 or Table 5-2, the MRFU V2 must be configured according to the specifications of the MRFU V1. and the BTS version does not meet the version requirements in Table 5-1 or Table 5-2, the BTS supports the plug-and-play function of the MRFU V2 without upgrade of the BTS software.
2012-6-19
Huawei Confidential
Page 14 of 14