Beruflich Dokumente
Kultur Dokumente
FEATURES
SINGLE-PHASE
Electrical
Data
Mechanical
Data
THREE-PHASE
General Purpose Motors
- ODP
- TEFC
Efficiency)
ADDITIONAL INFORMATION
Three-phase brake motorsinstallation aspects....................................................................................................................
Hazardous environments .......................................................................................................................................................
Pulleys maximum acceptable radial and axial loads ...........................................................................................................
Mounting configurations .........................................................................................................................................................
Unit conversion table ..............................................................................................................................................................
WEG Warranty ........................................................................................................................................................................
63
65
66
68
69
69
- 1 to 200 HP
- NEMA Design A or B
- Continuous rated
- Squirrel cage induction
The above definition is too generic. The Department of Energy provided in June 20, 1997 a guidance to
electric motor manufacturers in order to help them to identify what motors are considered general purpose,
definitive purpose or special purpose. They classified the motors in five categories:
- Category I - General purpose as defined by EPAct and applicable from October 24/97 on.
- Category II - Definitive purpose that can be used in most general purpose applications.
EPAct is applicable from October 25/99 on.
- Category III, IV and V - Motors not covered by EPAct (definitive and special motors).
- Two-speed
- Inverter Duty Motors
- DC and Brake motors, etc.
If you need assistance how to identify your motor application is covered by EPAct or not, please feel free to contact
WEG
WEG POLICY
- WEG has a large quantity of standard efficiency motors in stock
- WEG also has top efficiency line that exceeds EPAct levels
- All WEG premium efficiency motors meet EPAct levels
- Standard efficiency motors will be still available for installation outside USA
IP22 - Single-phase
Standard features
1 phase, 60Hz, 208-230 or 115/208-230 V
182/184T cast iron frame
Squirrel cage rotor / Aluminum die cast
Open drip proof (IP22)
Ball bearings
Dimensions according to NEMA standard
Class F insulation
Service factor: 1.25
Continuous duty (S1)
104oF (40 oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: F1
Paint: Enamel alkyd resin base, color RAL 7022 (dark
gray)
NPT threaded holes at T-Box
Stainless steel nameplate
Optional features
Applications
Pumps
Fans
Conveyors
Blowers
Air Compressors
Refrigeration Equipment
Industrial Equipment
Milling Machines
Tools
Milking Machines
Other moderate to hard starting torque applications
RECOGNIZED BY
APPROVED BY
Special voltages
Flange mounting
Specially designed shaft
Second shaft end
Thermistors or thermostats
E 104590
LR 38324
FEATURES
Standard features
Single-phase, 60Hz
Voltage: From 1,5 up to 3HP = 115/230 or 208-230/460 V
From 5 up to 10HP = 208/230 or 208-230/460 V
VI Pole = 208-230/460 V
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP55)
(VRing) Slinger on both endshields
Ball bearings
Dimensions according to NEMA standard
Insulation: - class B up to G145T
- class F for frame W182/4T and up
Service factor: 1.15
Steel plate frames: 56 up to 143/5T
Cast iron frames: W182/4T up to 215T
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: F1
Stainless steel nameplate
Paint: Enamel alkyd resin base, color RAL 7022 (dark gray)
NPT threaded holes at T-Box
Automatic drain plugs
Applications
Pumps
Fans
Conveyors
Blowers
Air Compressors
Machinery
Industrial Equipment
Milling Machines
Wood Lathes
Other moderate to hard starting torque applications
APPROVED BY
RECOGNIZED BY
Optional features
Special voltages
Specially designed shaft
Second shaft end
Thermistors or thermostats
Drip cover (canopy) for shaft down applications
Stainless steel shaft
Flange Mounting
LR 38324
E 104590
TEFC (IP55)
Standard features
Applications
Silo unloaders
Stock feeders
Bin grain storage and draying-spreaders
Auger unloaders and cross-conveyors
Feed preparation
Poultry and Farrowind Sheds
Water pumping
Other farm duty machinery
APPROVED BY
RECOGNIZED BY
Optional features
Class H insulation
Special voltages
Specially dimensioned shaft
Second shaft end
Stainless steel shaft
Flange mounting
LR 38324
E 104590
CT
PA
E
et
ls
Me Leve
FEATURES
Standard features
PREMIUM EFFICIENCY
3 phase, II & IV pole, 60Hz, 208-230/460, 460 or 575 V
Squirrel cage rotor / Aluminum die cast
Open drip proof
Dimensions according to NEMA standard
NEMA design B ratings
Service Factor: 1.15
Class F insulation for all frames
Continuous duty (S1)
104F (40C) ambient temperature
Altitude: 3300ft (1000 m)
1045 carbon steel shaft (4140 for roller bearings motors)
Usual mounting: F1 (also available flanged motors)
Paint: Enamel alkyd resin base
Color: RAL 5007
NPT threaded holes at T-Box
Stainless steel nameplate
Obs: All premium efficiency motors are tested according
to IEEE 112 std. - method B or C390 CSA
FOR FRAME 143/5T ONLY
Welded steel plate frames (welded feet)
Cast iron endshields fixed with rods
ZZ bearings (double shielded)
Degree of Protection: IP21
FOR FRAME 182T up to 215T ONLY
Welded steel plate frames (welded feet)
Aluminum endshields and T-box
Cooling system with finned rotor
Endshields fixed with rods
ZZ bearings (double shielded)
Degree of protection: IP21
FOR FRAME 254T up to 445T ONLY
Cast iron frames
Cast iron endshields, T-box and fan covers
Endshields fixed with bolts
Cooling system with finned rotor
Ball bearings (roller bearings for frames 404T and up,
for IV Pole)
Thermistors (1 per phase) from frame 324T and up
Regreasable bearings system ( frame 254T and up)
Degree of Protection IP 23
Optional features
Cable glands
Special voltages
Cast iron NEMA C or D flange (D flange only for frame
254T and up)
Specially designed shaft
Second shaft end
Thermistors, thermostats or RTDs (PT100)
Roller bearings on drive end
IEC metric frames (on request) for frame 254T up to 445T
Applications
Pumps
Fans
Kneader and mixer machines
Cutter and sawing machines
Pressing machines
Industrial equipment
Conveyors
Blowers
APPROVED BY
Compressors
Machinery
Cranes
Other
RECOGNIZED BY
ALSO ENERGY
VERIFIED CSA
C390-93
LR 38324
E 104590
FEATURES
Three-phase
cy
ncy
ien
e
c
i
i
f
s
c
l
f
i
E EE &
Eff leve
m
ls
C
m
u
T
i
iu AC
T, Leve
m
C
m
e
P
Pr
PA ff.
Pre ets E
o p ets E l l e E
e
T
M
Me n e v i
n
Bo
Standard features
STANDARD, PREMIUM AND TOP PREMIUM EFFICIENCY
3 phase, 60Hz, 208-230/460, 460 or 575 V
143T up to 586/7T cast iron frame
Squirrel cage rotor / Aluminum die cast
Enclosure: - Standard and Premium Efficiency:
TEFC (IP55)
- Top Premium Efficiency: TEFC (IPW55)
VRing slinger on both endshields
Ball bearings (roller bearings on frame 404T and up,
for IV, VI and VIII pole)
Dimensions according to NEMA standard
Class F insulation for all frames
Temperature rise: Class B (80C)
NEMA ratings design B for premium and top premium
efficiency motors
Service factor: See Electrical Features
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft (4140 for roller bearings motors)
Usual mounting: F1
Stainless steel nameplate
Paint: Enamel alkyd resin base
Color: - Standard efficiency motors: RAL 7022
- Premium and top premium efficiency motors:
RAL 5007
- Top premium efficiency motors: Two
components, epoxy polyamide paint
NPT threaded holes at T-Box
Automatic drain plugs
Regreasable bearings system (frame 254T and up)
Thermistors (1 per phase) from frame 324T and up
Obs: All premium efficiency motors are tested
according to IEEE 112 std. - method B or C390 CSA
APPROVED BY
RECOGNIZED BY
LR 38324
E 104 590
(only for Standard
Efficiency Line)
Optional features
Special voltages
Specially designed shaft
Space heaters
Second shaft end
Thermostats or RTDs (PT100)
Additional terminal box
Drip cover (canopy) for shaft down applications
Cable glands
Flanged motors
Roller bearings on drive end for all frames
Special painting plan
Applications
Chemical plants
Compressors
Pulp and paper mills
Crushers
Refineries
Pumps
Steel mills
Fans
Cement mills
Other
FEATURES
Standard features
PREMIUM EFFICIENCY
3 phase, II & IV pole, 60Hz, 208-230/460, 460 or 575 V
Squirrel cage rotor / Aluminum die cast
Open drip proof
Dimensions according to NEMA standard
NEMA design B ratings
Service Factor: 1.15
Class F insulation for all frames
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: F1 (with cast iron CFlange)
Paint: Enamel alkyd resin base
Color:RAL 5007
NPT threaded holes at T-Box
Stainless steel nameplate
Obs: All premium efficiency motors are tested
according to IEEE 112 std. - method B' or C390 CSA
FOR FRAME 143/5JM/JP ONLY
Welded steel plate frames (welded feet)
Cast iron endshields fixed with rods
Cooling system with finned rotor
ZZ bearings (double shielded)
Degree of protection: IP 21
FOR FRAME 182JM/JP up to 215JM/JP ONLY
Welded steel plate frames ( welded feet)
Aluminum endshields and T-box (NDE Endshield)
Cooling system with finned rotor
Endshields fixed with rods
ZZ bearings (double shielded)
Degree of protection: IP 21
FOR FRAME 254JM/JP up to 405JP ONLY
Cast iron frames
Cast iron endshields
Cooling system with finned rotor
Endshields fixed with bolts
Ball bearings
Thermistors (1 per phase) from frame 324JM/JP and up
Regreasable bearings system (frame 364JM/JP and up)
Degree of protection: IP 23
Optional features
Cable glands
Special voltages
Specially designed shaft
Second shaft end
Thermostats or RTDs (PT100)
Roller bearings on drive end
IEC metric frames (on request) for frame 254JM/JP up
to 405JP
Applications
Specially developed line for industrial and commercial
pumping applications.
Water Pumping
Process
Transfer and Circulating Pumps
Other
APPROVED BY
LR 38324
Standard features
STANDARD & PREMIUM EFFICIENCY
3 phase, 60Hz, 208-230/460, 460 or 575 V
From 143JM/JP up to 405JP cast iron frame
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP55)
VRing slingers on both endshields
Ball bearings
Class F insulation for all frames
NEMA ratings design B for premium efficiency motors
Service factor: See Electrical Features
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: F1
Stainless steel nameplate
Paint: Enamel alkyd resin base
Color: - standard efficiency motors: RAL 7022
- premium efficiency motors: RAL 5007
NPT threaded holes at T-Box
Automatic drain plugs
Regreasable bearings system (frame 254JM/JP and up)
Thermistors from 324JM/JP frame and up
Obs: All premium efficiency motors are tested
according to IEEE 112 std. - method B' or C390 CSA
Optional features
Cable glands
Special voltages
Specially designed shaft
Space heaters
Second shaft end
Thermostats or RTDs (PT100)
Additional terminal box
Stainless steel shaft
Applications
Specially developed line for industrial and commercial
pumping applications in dusty environments
Water Pumping
Process
Transfer and Circulating Pumps
Other
APPROVED BY
RECOGNIZED BY
LR 38324
E 104590
P-Base Motors
Standard features
STANDARD & PREMIUM EFFICIENCY
3 phase, 60Hz, 208-230/460, 460 or 575 V
HP type: from 143T up to 445T frame
HPH type: 284/6T and 404/5T frame
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP55)
VRing slingers on both endshields
Cast iron frame
Ball bearings
Class F insulation for all frames
Ratings: NEMA design B for premium efficiency motors
Service factor: See Electrical Features
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: V1 - footless
Stainless steel nameplate
Paint: Enamel alkyd resin base
Color: - standard efficiency motors: RAL 7022
- premium efficiency motors: RAL 5007
NPT threaded holes at T-Box
Drip cover (canopy)
Automatic drain plugs
Regreasable bearings system (frame 254T and up)
Thermistors from 324T frame and up
Obs: All Premium efficiency motors are tested
according to IEEE 112 std. - method B or C390 CSA
Applications
Normal thrust in-line pump applications
Waste water treatment plants
Petro chemical industries
Pulp and paper mills
Agricultural irrigation
Other
APPROVED BY
Optional features
Cable glands
Special voltages
Space heaters
Second shaft end
Thermostats or RTD-PT100
Additional terminal box
Stainless steel shaft
RECOGNIZED BY
LR 38324
E 104590
11
Standard features
HIGH TORQUE - NEMA DESIGN D' (5 - 8% SLIP)
Single and triple rated available
3 phase, 60Hz, 208-230/460 or 575 V
215T up to 445T cast iron frames
VI Pole
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP55)
VRing slinger on both endshields
2RS sealing bearings from frame 143T up to 215T
Dimensions according to NEMA standard
Class F insulation
Service factor: 1.15
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft (4140 for roller bearings)
Usual mounting: F2
Stainless steel nameplate
Paint: Enamel alkyd resin base, color RAL 7022 dark gray
NPT threaded holes at T-Box
Automatic drain plugs
Regreasable bearings system (frame 364T and up)
Thermistors (1 per phase) from frame 324T and up
Optional features
Applications
Oil Well Pumping Units
RECOGNIZED BY
E 104590
12
FEATURES
Standard features
Applications
Circular saws
Pendulum saws
Grinding machines
Polishing machines
Optional features
Special voltages
Specially dimensioned shaft
NPT, metric, etc. threaded holes at terminal box
Stainless steel shaft
APPROVED BY
RECOGNIZED BY
Pendulum saws
LR 38324
E 104590
cy
ien with
c
i
f
Ef ng
um plyi ls
i
m
m
e
Pre dy co T lev
C
a
A
e
EP
alr
Standard features
STANDARD & PREMIUM EFFICIENCY
3 phase, 60Hz, 208-230/460,460 or 575 V
143T up to 586/7T cast iron frame
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP54)
Ball bearings (roller bearings in frame 404T and up, for
IV, VI and VIII pole)
Class F insulation
Service factor: 1.15
Dimensions according to NEMA standard
NEMA ratings design B for premium efficiency motors
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft (4140 for roller bearings motors)
Usual mounting: F1
Stainless steel nameplate
Paint: Enamel alkyd resin base
Color: -standard efficiency motors: RAL 7022 (dark gray)
- premium efficiency motors: RAL 5007 blue
NPT threaded holes at T-Box
Non sparking fan
Thermostats
Obs: Premium efficiency motors are tested according to
IEEE 112 std. - method B or C390 CSA
Optional features
Special voltages
Other construct form
Specially designed shaft
Stainless steel shaft
Flanged motor
Applications
Gasoline
Flour / feed mills
Grain Elevators
Fans
Pumps
Blowers
Material Handling Equipment
Other applications requiring motors UL or CSA listed for
hazardous locations
CSA and UL approved
CSA approved - File LR 50962
Division I, class I, groups C and D
Division I, classII, groups F and G
UL approved Frame 143T up
Division I, class
Division I, class
File E 87848
to 326T
I, groups C and D
II, groups F and G
14
FEATURES
Standard features
STANDARD & PREMIUM EFFICIENCY
3 phase, 60Hz, 208-230/460,460 or 575 V
143T up to 256T* cast iron frame
Squirrel cage rotor / Aluminum die cast
Enclosure TEFC (IP55)
VRing slingers on both endshields
Ball bearings
Dimensions according to NEMA standard
Class of insulation: F
NEMA Ratings design B for premium efficiency motors
Service factor: 1.15 (Standard) and 1.25 (Premium
efficiency)
Continuous duty (S1)
104oF (40oC) ambient temperature
Altitude: 3300 ft (1000 m)
1045 carbon steel shaft
Usual mounting: F1
Stainless steel nameplate
Paint: Enamel alkyd resin base
Color: - standard efficiency motors: RAL 7022 (dark gray)
- premium efficiency motors: RAL 5007 blue
NPT threaded holes at T-Box
Automatic drain plugs
Thermistors (1 per phase) from frame 324T and up
Slow, medium or rapid braking connectors - 230V or 460V
Manual brake release
Obs: All premium efficiency motors are tested
according to IEEE 112 std. - method B or C390 CSA
* WEG can supply Frames 284/6T and 324/6T only on
request, after receiving load information:
- Braking torque
- Number of stops (brakings) per hour.
Optional features
Applications
Applications requiring quick stop/start control
Conveyors
Gear reducers
Machine Tools
Material Handling Equipment
Other
RECOGNIZED BY
E 104590
IP55
Standard features
Optional features
Applications
Fans
Pumps
Blowers
Conveyors
Farm Equipment
Saws
Other
RECOGNIZED BY
E 104590
Special voltages
Specially designed shaft
Space heaters
Second shaft end
Thermostats or RTD-PT100
Additional terminal box
Roller bearings on drive end
Drip cover (canopy) for shaft down applications
Aluminum frames (143T up to 184T frames)
Stainless steel shaft
Flanged motor
TEAO
16
CT
PA
E
ls
ets
Me L e v e
FEATURES
Standard features
PREMIUM EFFICIENCY
Applications: Constant Torque - Speed range 10:1
(best used with WEG matched VFDs)
3 phase, 60Hz, 208-230/460, 460 or 575V
Enclosure TEBC Blower voltage and frequency:
3 phase, 60Hz
Noise level up to 77DB (A) (noise pressure)
Degree of protection: IP55
NEMA Design B
Class F insulation (B Temperature rise)
Service factor: 1.15 at sine wave power
1.00 on inverter power
143T up to 586/7T cast iron frame
Squirrel cage rotor/ Aluminum die cast
Thermistors (1 per phase) from frame 324T and up
Insulation System suitable to withstand voltage spikes up
to 1600V and rise times to 0.1m, as per NEMA standard
MG-1, part 31
Grounding system between shaft and frame through ring
and brush - 504/5T
Color RAL 5007 (blue)
Applications
Conveyors
Chemical plants
Compressors
Pulp and paper mills
Crushers
Refineries
Pumps
Steel mills
Fans
Cement mills
Grinders
Mixers
Other
Optional features
Blower kit from 213T up to 505T frame
Encoder: Dynapar type HR 526 1024 B5 E1,
electrically isolated 1024 pulses 10 pin MS
connector, with side located terminal, with extended
temperature range, operations from 5 to 24V
Labyrinth Seal from frame 213/5T
Space heaters
Class H insulation
Special Insulating bearings with Aluminum oxide on
D.E. and N.D.E. bearings - Frames 504/5T
Eletrical features on page
For premium efficiency motor .............................38
Mechanical tables on page.....................................58
Flange options on page..........................................59
17
FEATURES
IPW55
These WEG IEEE 841 Mill and Chemical Duty Motors are
specially suited for Pulp and Paper Mills, Petrochemical,
Steel Mills and applications requiring Severe Duty long life
motors
Standard features
PREMIUM EFFICIENCY
3 phase, 60Hz, 460V
Enclosure TEFC
Degree of protection: IPW55
Class F insulation (B Temperature rise)
NEMA ratings design B
40C ambient
Service factor: 1.25 - up to 100HP
1.15 - from 125HP and up
143T up to 586/7
All cast iron reinforced construction: frame, endshields,
terminal box and fan cover
Squirrel cage rotor/ Aluminium die cast
Stainless steel nameplate
All motors supplied with ball bearings, except roller
bearings in drive end for frames 404T and up (IV and VI
pole)
High tensile steel shaft (for frame 404T and up- IV, VI and
VIII)
Brass labyrinth seal on drive end and opposite drive end
Corrosion resistant epoxy finish
Special painting plan RAL 5007 blue
Regreasable ball bearings D.E. and O.D.E.
Oversized rotatable cast iron conduit box
Performance tests supplied with each motor:
- Routine
- Noise level
- Vibration
Applications
Pumping applications
Pulp and paper mills
Petrochemical
Others
APPROVED BY
Optional features
LR 38324
18
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
kW
2.2
3.7
7.5
5.5
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 115V At 230V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
Rotor
Inertia
Time
SF
50
75
100
50
75
100
Locked Approx.
of
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
182T
3520
30.0
15.0
4.41
2.4
2.2
70.0
77.0
78.0
0.64
0.74
0.80
1.25
0.17600
6/13
73
184T
1745
34.0
17.0
8.90
2.7
2.2
68.0
71.0
72.0
0.59
0.71
0.80
1.25
0.38400
6/13
90
184T
3510
42.0
21.0
7.36
2.6
2.6
79.0
81.0
82.0
0.92
0.94
0.95
1.25
0.27500
6/13
99
184T
1730
44.0
22.0
14.96
2.3
2.2
75.0
77.0
78.0
0.82
0.88
0.92
1.25
0.44300
6/13
99
184T
3520
60.0
30.0
11.03
2.0
2.7
81.0
84.0
85.0
0.85
0.93
0.95
1.25
0.46900
6/13
118
Rated
Output
NEMA
Rated
Full
Locked
Full
Locked
Break-
Efficiency
Power Factor
Load
Rotor
Load
Rotor
down
Cos
kW
Frame
rpm
at 230V
kVA
Tn
(in A)
Code
Lb.Ft
Tl/Tn
Torque
Tn/Tn
% of full load
50
75
100
50
75
100
Moment
Star
Run
Service
of
Capacitor
Capacitor
Factor
Inertia
SF
Wk2
Approx.
Weight
Lb
Lb.Ft2
1/4
0.18
B56
3480
2,50
0,37
2,8
3,0
32,0
40,0
46,0
0,61
0,67
0,76
1,15
0,02475
1X145-175 110
---
---
20,0
1/4
0.18
B56
1750
2,30
0,73
3,6
3.0
43,0
51,5
55,6
0,46
0,53
0,61
1.15
0,05457
1X216-259 110
---
---
19,8
1/3
0.25
B56
3500
2,80
0.48
3.2
3.0
46.0
49.0
52.0
0.58
0.66
0.73
1.15
0,02847
1x161-193 110
---
---
22,0
1/3
0.25
B56
1750
3,00
0.98
3.4
2.8
45.0
53.0
57.3
0.46
0.56
0.62
1.15
0,06359
1x216-259 110
---
---
20,9
1/2
0.37
B56
3500
3,80
0.73
3.4
3.0
44.0
51.0
54.1
0.60
0.70
0.77
1.15
0,03274
1x189-227 110
---
---
23,1
1/2
1/2
0.37
0.37
B56
D56
1750
1180
3,85
4,90
M
S
1,47
2.20
3,3
3.0
2,5
2.7
49,0
51,0
56,0
55,0
63,0
60,0
0,44
0.48
0,54
0.50
0,65
0.54
1.15
1.15
0,07356
0,14470
23,1
27,0
3/4
0.55
B56
3500
5,30
1,10
3.0
3.0
51.0
58.0
60.6
0.56
0.67
0.75
1.15
0,04105
1x270-324 110
27,5
3/4
3/4
0.55
0.55
B56
F56H
1740
1160
5,60
5,20
L
K
2.23
3.35
3.0
2.5
2.6
2.4
54,0
58,0
62,0
61,0
65,0
65.5
0,52
0.60
0.58
0.65
0.66
0.70
1.15
1.15
0,09017
0,18030
26,0
42,0
0.75
D56
3510
6,30
1.47
3.2
3.0
59.0
64.0
67.7
0.56
0.68
0.75
1.15
0,05220
1x340-408 110
---
---
29,7
0.75
D56
1750
7,00
2.95
3,2
2.6
58.0
64,0
68,0
0,50
0,60
0,67
1.15
0,12339
1x540-648 110
---
---
34,1
1.5
1.1
D56
3500
8,50
2.21
2.5
2.8
64.0
69.0
70.0
0.61
0.72
0.80
1.15
0,06169
1x430-516 110
---
---
1.5
1.1
F56H
1750
9,00
4.46
3.0
2.6
66.0
70.0
72.0
0.52
0.62
0.74
1.15
0,18034
46,3
1.5
1.1
W182T
1170
7,70
6.63
2.3
2.2
68,0
76,0
80,0
0.63
0.72
0.78
1.15
0,34574
88,0
2
2
1.5
1.5
F 56 H
G56H
3490
1750
10,5
10,8
J
J
2.96
5,90
2.7
2,5
2.6
2,2
70.0
69,0
73.0
72,0
75.0
75,0
0.66
0,58
0.75
0,69
0.81
0,80
1.15
1.15
0,08068
0,19933
41,8
50,7
1.5
W213/5T
1160
10,0
8.92
2.3
2.4
68,0
75,0
80,0
0.68
0.75
0.80
1.15
0,53155
108
1.5
W182/4T
1725
10,0
0.60
2.9
2.5
64.0
70.0
72.7
0.74
0.82
0.88
1.15
0,21784
68,0
---
---
34,1
3.0
2.2
W182T
3480
13,5
4.46
2.8
2.6
72.5
77.0
78.8
0.81
0.87
0.91
1.15
0,15187
70,5
3.0
2.2
W182/4T
1750
14,5
0.91
2.9
2.4
69.0
75.0
77.2
0.72
0.80
0.86
1.15
0,23730
73,0
3.0
2.2
W213/5
1160
13,0
13.3
2.2
2.3
71,0
78,0
81,0
0.84
0.89
0.91
1.15
0,61935
125
5.0
5.0
3.7
3.7
184T
184T
3490
1730
21,0
21,0
H
H
7.41
1.53
2.8
2.9
2.6
2.4
77.0
76.0
79.0
78.0
80.0
79.4
0.90
0.91
0.94
0.93
0.95
0.95
1.15
1.15
0,23730
0,42714
105
143
5.0
3.7
W213/5T
1730
21,0
1.53
2.9
2.4
76.0
78.0
79.4
0.91
0.93
0.95
1.15
0,44612
116
5.0
3.7
W213/5TZ 1730
21,0
1.53
2.9
2.4
76.0
78.0
79.4
0.91
0.93
0.95
1.15
0,44612
116
5.0
3.7
22,0
22.3
2.3
2.2
78,0
82,0
83,0
0.80
0.86
0.88
1.15
1,78449
167
215T
1160
7.5
5.5
184T
3495
32,0
11.1
2.1
2.1
68.0
74.0
81.5
0.88
0.90
0.92
1.15
0,24679
119
7.5
5.5
213/5T
1730
32,0
2.29
2.9
2.4
77.0
80.0
82.0
0.87
0.89
0.92
1.15
0,90648
154
7.5
5.5
213/5TZ
1730
32,0
2.29
2.9
2.4
77.0
80.0
82.0
0.87
0.89
0.92
1.15
0,90648
154
10
7.5
215T
3500
38,2
14.7
2.5
1.8
84.5
85.5
86.2
0.94
0.95
0.97
1.15
0,57663
158
10
7.5
213/5T
1720
40,0
3.07
2.7
2.4
80.0
82.0
83.0
0.90
0.94
0.96
1.15
1,18650
165
12.5
12.5
9.2
9.2
215T
215T
3500
1740
48,0
48,0
H
G
18.5
37.2
2.9
2.2
1.7
2.4
85.0
79.0
87.0
84.0
88.0
85.3
0.91
0.95
0.93
0.96
0.95
0.98
1.15
1.15
0,75412
1,32413
178
198
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
19
ELECTRICAL DATA
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
Rated
Output
NEMA
ELECTRICAL DATA
Frame
HP
kW
0.33
0.25
B56
0.5
0.37
B56
0.75
1.0
0.55
0.75
B56
F143T
1.0
0.75
D56
1.5
1.1
F56H
1.5
2.0
1.1
1.5
G145T
G56H
2.0
1.5
G145T
2.0
1.5
W182/4T
3.0
5.0
2.2
3.7
W182/4T
184T
5.0
3.7
5.0
3.7
7.5
7.5
5.5
5.5
10
7.5
Rated
speed
rpm
Full
Load
Current In
(A) at 230V
Locked
Rotor
Current
KVA
Code
Torque
Lb.Ft
Tl/Tn
Service
Moment of
Torque
Factor
Inertia
Tb/Tn
SF
(Lb.Ft)
Breakdown
Efficiency %
Locked
Rotor Time
(s)
Approx. Sound
Weight dB (A)
(Lbs)
50
75
100
50
75
100
45.0
51.0
53.0
58.0
57.3
62.6
0.46
0.48
0.56
0.56
0.62
0.69
1.15
0.06169
21
55
1.15
0.08068
23
55
1.15
1.15
0.09966
0.13526
6
6
25
32
55
55
3.00
0.10
3.4
2.8
0.15
3.4
2.8
1740
3.70
5.50
3.0
3.0
2.6
2.6
63.0
66.1
0.52
0.58
0.66
7.50
0.23
0.30
56.0
1740
L
M
58.0
63.0
66.4
0.60
0.68
0.73
1750
1740
7.50
0.30
3.0
2.6
0.68
0.62
0.73
0.74
55
2.6
0.60
0.52
33
3.0
66.4
72.0
0.46
63.0
70.0
0.13526
58.0
66.0
1.15
1.15
0.19933
46
55
1740
9.00
9.00
3.0
2.8
2.6
2.6
70.0
72.0
0.52
0.62
0.74
11.0
0.60
0.60
66.0
1740
J
J
68.0
71.0
72.7
0.58
0.69
0.80
1.15
1.15
0.19933
0.21831
6
6
47
49
55
55
1740
1725
11.0
0.60
2.8
2.6
0.69
0.82
0.80
0.88
55
2.5
0.58
0.74
50
2.9
72.7
72.7
0.60
71.0
70.0
0.21831
68.0
64.0
1.15
1.15
0.21784
68
60
1750
10.0
14.5
2.9
2.9
2.4
2.4
75.0
77.2
0.72
0.80
0.86
21.0
0.91
1.53
69.0
1730
J
H
76.0
78.0
79.4
0.91
0.93
0.95
1.15
1.15
0.23730
0.42714
6
6
73
143
60
60
W213/5T 1730
W213/5TZ 1730
1730
213/5T
21.0
1.53
2.9
2.4
0.93
0.93
0.95
0.95
60
2.4
0.91
0.91
116
2.9
79.4
79.4
1.53
78.0
78.0
0.44612
76.0
76.0
1.15
21.0
32.0
1.15
0.44612
116
60
2.4
2.4
82.0
0.87
0.89
0.92
32.0
2.9
2.9
80.0
1730
2.29
2.29
77.0
213/5TZ
H
H
77.0
80.0
82.0
0.87
0.89
0.92
1.15
1.15
0.90648
0.90648
6
6
154
154
60
60
213/5T
1720
40.0
3.07
2.7
2.4
80.0
82.0
83.0
0.90
0.94
0.96
1.15
1.18650
165
65
1740
1740
20
Allowable
T
AC
t EP ls
e
Me Leve
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
kW
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 460V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
1.0
0.75
143T
1730
1.4
1.1
2.3
3.3
3.2
80.0
81.5
82.5
0.61
0.74
0.81
1.15
0.0954
12/26
33
1.5
1.1
143T
3405
2.0
1.6
2.3
3.0
3.5
80.0
81.5
82.5
0.70
0.80
0.86
1.15
0.0325
15/32
29
145T
1730
2.0
1.6
4.5
3.5
3.2
82.5
84.0
84.0
0.64
0.76
0.83
1.15
0.0109
10/22
38
2.0
1.5
145T
3410
2.5
2.0
3.0
3.0
3.5
81.5
82.5
84.0
0.78
0.86
0.89
1.15
0.0441
12/26
40
145T
1715
2.6
2.1
6.0
3.0
3.0
82.5
84.0
84.0
0.71
0.82
0.87
1.15
0.1227
10/22
40
3.0
2.2
145T
3400
3.7
3.0
4.6
3.5
3.4
81.5
82.5
84.0
0.80
0.88
0.90
1.15
0.0531
8/17
46
182T
1760
3.9
3.1
8.8
2.0
3.0
82.5
85.5
86.5
0.62
0.74
0.81
1.15
0.2281
11/23
47
182T
3480
6.0
4.8
7.4
2.0
2.9
84.0
85.5
85.5
0.75
0.83
0.88
1.15
0.1305
9/18
48
184T
1755
6.3
5.0
14.8
2.1
3.0
84.0
86.5
87.5
0.66
0.77
0.83
1.15
0.3260
8/18
60
184T
3485
9.0
7.2
11.2
2.3
3.0
86.5
87.5
87.5
0.78
0.85
0.88
1.15
0.1677
6/14
60
213T
1755
9.6
7.7
22.1
1.8
2.5
85.5
87.5
88.5
0.68
0.78
0.83
1.15
0.7080
8/17
72
213T
3500
12.0
9.6
14.8
2.2
3.2
86.5
88.5
88.5
0.78
0.86
0.90
1.15
0.4550
7/15
95
215T
1760
13.0
10.4
29.4
1.8
2.3
86.5
88.5
89.5
0.67
0.78
0.83
1.15
0.9435
8/17
96
3500
18.0
14.4
22.2
2.1
3.1
88.5
89.5
89.5
0.84
0.89
0.90
1.15
0.5915
10/20
126
5.0
7.5
10
3.7
5.5
7.5
15
11
215T
254T
1765
19.0
15.2
44.2
2.3
3.0
87.5
89.5
91.0
0.70
0.78
0.83
1.15
1.54800
12/26
232
20
15
254T
3530
25.0
20.0
29.5
2.0
2.5
88.5
90.2
90.2
0.75
0.80
0.85
1.15
0.90400
12/25
187
256T
1765
25.0
20.0
58.7
2.5
3.2
88.5
89.5
91.0
0.72
0.80
0.83
1.15
1.90500
10/20
287
256T
3530
29.0
23.2
36.9
2.0
2.5
89.5
90.2
91.0
0.76
0.85
0.87
1.15
1.07800
10/20
234
284T
1765
30.0
24.0
73.7
2.5
3.0
88.5
91.0
91.7
0.73
0.80
0.84
1.15
2.67000
11/23
306
284TS
3530
33.0
26.4
43.5
2.0
2.7
90.2
91.7
92.4
0.85
0.90
0.90
1.15
2.39100
7/15
348
286T
1770
36.0
28.8
88.3
2.5
3.1
90.2
91.7
92.4
0.75
0.81
0.84
1.15
3.52400
11/22
397
286TS
3555
45.0
36.0
58.3
2.2
2.8
91.7
92.4
92.4
0.85
0.90
0.91
1.15
2.98900
6/13
435
324T
1765
47.0
37.6
117
2.3
2.5
91.0
92.4
93.0
0.75
0.84
0.86
1.15
5.10200
14/30
470
324TS
3550
55.0
44.0
73.0
2.0
2.7
91.7
93.0
93.6
0.80
0.88
0.90
1.15
3.52500
14/30
500
326T
1765
58.0
46.4
147
2.2
2.6
91.0
92.4
93.0
0.75
0.84
0.87
1.15
6.08900
13/27
563
590
25
30
40
50
60
18.5
22
30
37
45
75
55
100
75
125
150
200
250
300
90
110
150
185
220
326TS
3550
67.0
53.6
87.7
2.0
2.8
92.4
93.6
94.1
0.82
0.88
0.90
1.15
4.16600
13/28
364/5TS *
1770
70.0
56.0
176
2.2
2.6
91.7
93.0
93.6
0.74
0.84
0.86
1.15
12.5800
13/28
660
364/5TS
3550
81.0
64.8
109
1.8
2.8
93.0
94.1
94.1
0.84
0.90
0.91
1.15
6.73500
12/25
728
364/5TS *
1780
85.0
68.0
218
2.4
2.8
93.0
93.6
94.1
0.74
0.82
0.86
1.15
16.3530
10/22
860
364/5TS
3550
110
88.0
146
1.9
3.0
93.6
94.1
94.1
0.86
0.91
0.91
1.15
8.20800
9/19
860
404/5TS *
1780
115
92.0
291
2.4
2.5
93.0
93.6
94.1
0.74
0.84
0.87
1.15
19.7080
9/19
1036
404/5TS
3555
132
106
182
1.8
3.0
93.6
94.1
94.1
0.87
0.91
0.91
1.15
9.26000
6/13
970
404/5TS *
1775
138
110
365
2.4
2.6
93.0
94.1
94.5
0.75
0.84
0.87
1.15
20.9660
8/17
1097
404/5TS
3555
160
128
219
2.1
3.0
93.6
94.1
94.5
0.87
0.91
0.92
1.15
10.1000
6/13
1058
444/5TS *
1780
165
132
436
2.4
2.6
93.6
94.5
95.0
0.75
0.85
0.88
1.15
34.8170
6/13
1290
444/5TS
3560
217
174
292
2.0
2.5
94.1
94.5
94.5
0.89
0.91
0.92
1.15
25.0200
10/20
1605
444/5TS *
1780
220
176
584
2.3
2.4
93.6
94.5
95.0
0.80
0.88
0.90
1.15
48.9320
6/13
1815
444/5TS
3565
266
213
363
2.0
2.5
94.1
94.5
95.0
0.90
0.91
0.92
1.15
29.3700
8/17
1884
444/5TS *
1780
270
216
727
2.4
2.5
94.1
95.4
95.4
0.81
0.88
0.90
1.15
56.4600
5/11
2093
444/5TS
3565
316
253
435
2.0
2.6
94.1
94.5
95.0
0.91
0.91
0.92
1.15
32.6300
7/15
2090
* When motors are to be used with V belt or chain drives, the correct frame size is the frame size shown, but with the suffix letter S omitted.
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
21
ELECTRICAL DATA
Rated
Output
ELECTRICAL DATA
IP55 - Three-phase
Standard Efficiency
22
23
ELECTRICAL DATA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
1.5
ELECTRICAL DATA
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
24
kW
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
CT
PA
E
t
e
ls
Me Leve
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143T*
143T
3495
1765
2.85
2.90
1.14
1.16
M
L
1.51
2.99
3.0
2.8
4.0
3.9
74.0
75.5
78.5
80.0
78.5
82.5
0.69
0.60
0.79
0.73
0.84
0.79
1.25
1.25
0.03735
0.09312
23
16
51
35
40
44
145T
182T
1165
875
3.40
4.63
1.36
1.85
L
M
4.54
6.04
2.3
3.0
3.0
3.5
75.5
68.0
80.0
72.0
80.0
74.0
0.48
0.35
0.60
0.45
0.69
0.55
1.25
1.25
0.13303
0.39926
22
40
48
88
44
95
143T
145T
3495
1760
3.98
4.00
1.59
1.60
L
L
2.22
4.40
3.0
2.6
4.0
3.7
75.5
80.0
81.5
82.5
82.5
84.0
0.69
0.65
0.78
0.76
0.84
0.82
1.25
1.25
0.04312
0.11972
18
12
40
26
42
51
182T
184T
1165
860
4.75
5.43
1.90
2.17
M
J
6.65
9.01
3.2
2.5
4.0
2.6
81.5
74.0
84.0
75.5
85.5
77.0
0.47
0.47
0.58
0.58
0.68
0.66
1.25
1.25
0.48798
0.44363
36
32
79
70
68
110
145T
145T
3480
1755
5.20
5.28
2.08
2.11
L
K
3.04
6.02
3.5
2.4
4.0
3.2
80.0
81.5
82.5
84.0
84.0
84.0
0.70
0.68
0.81
0.79
0.86
0.85
1.25
1.25
0.04886
0.13303
13
12
29
26
44
53
184T
213T
1165
870
6.40
6.93
2.56
2.77
L
L
9.07
12.2
3.0
2.4
3.0
2.9
84.0
78.5
86.5
81.5
86.5
82.5
0.48
0.47
0.60
0.53
0.68
0.66
1.25
1.25
0.62109
1.19089
35
43
77
95
79
141
182T
182T
3500
1765
7.18
7.80
2.87
3.12
K
K
4.43
8.78
2.5
2.3
4.0
3.2
80.0
85.5
82.5
87.5
85.5
87.5
0.80
0.65
0.87
0.75
0.90
0.81
1.25
1.25
0.15443
0.31782
23
31
51
68
90
88
213T
215T
1170
860
8.30
8.55
3.32
3.42
J
K
13.3
18.0
2.2
2.0
2.5
2.1
86.5
82.5
87.5
84.0
87.5
84.0
0.60
0.60
0.70
0.71
0.76
0.77
1.25
1.25
1.01192
1.78632
59
30
130
66
110
153
184T
184T
3480
1745
11.7
13.0
4.67
5.18
H
H
7.49
14.9
2.4
2.1
3.5
3.0
85.5
85.5
86.5
87.5
87.5
87.5
0.85
0.68
0.90
0.78
0.91
0.82
1.25
1.25
0.19988
0.38136
28
21
62
46
105
93
215T
254T
1160
875
13.6
16.7
5.44
6.67
H
H
22.5
29.8
1.9
2.0
2.1
2.8
86.5
72.1
87.5
85.0
87.5
85.7
0.65
0.44
0.75
0.56
0.78
0.65
1.25
1.25
1.47188
2.89729
49
38
108
84
162
232
213T
213T
3510
1765
17.3
18.8
6.93
7.52
G
H
11.0
22.0
2.2
2.0
3.0
2.6
86.5
87.5
88.5
89.5
88.5
89.5
0.80
0.66
0.88
0.77
0.90
0.82
1.25
1.25
0.42144
1.01192
25
21
55
46
121
137
254T
256T
1170
875
19.1
22.5
7.62
9.01
H
G
33.1
44.3
2.3
1.9
3.1
2.7
88.5
83.4
89.5
85.9
89.5
86.3
0.62
0.51
0.74
0.63
0.81
0.71
1.25
1.25
2.386
3.40858
29
41
64
90
236
276
215T
215T
3500
1765
23.1
25.5
9.25
10.2
G
H
15.1
29.9
2.0
2.0
2.6
2.6
88.5
88.5
89.5
90.2
89.5
90.2
0.86
0.69
0.90
0.79
0.91
0.82
1.25
1.25
0.66546
1.3799
19
19
42
42
160
152
256T
284T
1175
880
25.3
27.3
10.1
10.9
H
H
45.0
60.1
2.3
2.5
2.9
2.4
88.5
86.5
89.5
88.5
89.5
88.5
0.67
0.60
0.78
0.72
0.83
0.78
1.25
1.25
2.89729
7.19918
24
53
53
117
278
373
254T
254T
3520
1765
34.0
35.3
13.6
14.1
F
G
22.0
43.9
2.0
2.5
2.7
2.5
89.5
89.5
90.2
91.0
90.2
91.0
0.86
0.74
0.89
0.82
0.90
0.86
1.25
1.25
1.25653
2.1436
33
26
73
57
254
240
284T
286T
1180
880
34.5
38.0
13.8
15.2
G
G
65.7
88.1
2.3
2.4
2.5
2.3
89.5
86.5
90.2
88.5
91.0
88.5
0.79
0.68
0.85
0.78
0.88
0.82
1.25
1.25
7.19918
8.18089
21
37
46
81
306
423
256T
256T
3520
1765
46.5
47.5
18.6
19.0
G
G
30.0
59.9
2.0
2.5
2.5
2.5
89.5
89.5
90.2
91.0
90.2
91.0
0.86
0.76
0.90
0.84
0.90
0.87
1.25
1.25
1.53576
2.38178
21
18
46
40
287
273
286T
324T
1175
880
47.0
55.3
18.8
22.1
G
G
90.0
120
2.3
2.3
2.5
2.3
90.2
87.5
91.0
89.5
91.0
89.5
0.80
0.58
0.86
0.69
0.88
0.76
1.25
1.25
8.18089
9.36495
31
47
68
103
430
512
284TS
284T
3520
1765
56.8
59.3
22.7
23.7
G
F
37.0
73.9
2.2
2.3
2.8
2.2
90.2
91.0
91.0
92.4
91.0
92.4
0.86
0.77
0.90
0.84
0.90
0.85
1.25
1.25
2.89729
3.83133
23
51
51
112
313
351
324T
326T
1175
880
59.5
71.0
23.8
28.4
F
G
111
148
2.2
2.6
2.4
2.9
89.5
87.5
91.7
88.5
91.7
89.5
0.72
0.53
0.81
0.65
0.85
0.73
1.25
1.25
10.2163
11.919
56
52
123
114
527
587
286TS
286T
3530
1770
67.5
70.3
27.0
28.1
G
F
43.9
87.6
2.4
2.5
3.0
2.3
90.2
91.0
91.0
92.4
91.0
92.4
0.87
0.76
0.90
0.83
0.90
0.85
1.25
1.25
3.57901
4.68274
60
47
132
103
388
397
326T
364/5T
1175
885
70.8
76.8
28.3
30.7
G
G
132
175
2.3
2.2
2.5
2.2
90.2
89.5
91.7
91.0
91.7
91.0
0.70
0.66
0.80
0.75
0.85
0.79
1.25
1.25
11.919
23.4554
35
48
77
106
580
882
324TS
324T
3550
1770
90.3
95.3
36.1
38.1
G
G
59.6
119
2.2
2.3
2.2
2.3
90.2
91.7
91.7
93.0
91.7
93.0
0.87
0.76
0.90
0.83
0.91
0.85
1.25
1.25
4.89559
7.85366
46
28
101
62
516
542
364/5T
364/5T
1175
885
94.3
105
37.7
41.9
G
G
180
239
2.3
2.2
2.3
2.2
92.4
89.5
93.0
91.0
93.0
91.0
0.76
0.66
0.83
0.75
0.86
0.79
1.25
1.25
23.4554
29.0401
35
42
77
92
882
953
326TS
326T
3550
1770
111
116
44.2
46.2
G
G
73.5
147
2.1
2.3
2.1
2.3
91.0
92.4
92.4
93.6
92.4
93.6
0.88
0.77
0.90
0.83
0.91
0.86
1.25
1.25
5.32131
9.1626
33
25
73
55
549
595
364/5T
404/5T
1180
885
116
130
46.5
51.9
G
G
221
295
2.5
2.2
2.7
2.1
92.4
90.2
93.0
91.7
93.0
91.7
0.74
0.69
0.82
0.75
0.86
0.78
1.25
1.25
29.0401
32.3908
39
29
86
64
882
1140
364/5TS
364/5T
3560
1770
134
136
53.4
54.2
G
F
89.1
179
2.0
2.1
2.5
2.2
91.0
92.4
92.4
93.6
93.0
93.6
0.80
0.83
0.87
0.87
0.91
0.89
1.25
1.25
8.51359
17.4383
61
23
134
51
807
853
404/5T
404/5T
1180
885
140
154
56.1
61.6
G
G
269
358
2.5
1.7
2.7
2.1
93.0
91.0
93.6
91.7
93.6
91.7
0.74
0.70
0.83
0.76
0.86
0.80
1.25
1.25
34.6247
36.8586
32
13
70
29
1067
1308
364/5TS
364/5T
3560
1775
163
165
65.3
65.9
F
G
109
218
2.0
2.3
2.1
2.4
91.0
93.0
93.0
94.1
93.0
94.1
0.80
0.83
0.88
0.87
0.91
0.89
1.25
1.25
9.79062
19.9295
46
22
101
48
915
900
404/5T
444/5T
1180
890
174
179
69.4
71.5
G
G
328
436
2.5
1.7
2.6
2.1
93.0
91.7
93.6
92.4
93.6
93.0
0.72
0.73
0.81
0.80
0.85
0.83
1.25
1.25
36.8586
73.6255
26
41
57
90
1136
1484
404/5TS
404/5T
3560
1775
221
229
88.4
91.6
F
G
148
298
2.0
2.1
2.6
2.2
91.7
93.6
93.6
94.5
93.6
94.5
0.81
0.80
0.89
0.86
0.91
0.87
1.25
1.25
11.919
27.4031
38
18
84
40
1206
1118
444/5T
444/5T
1185
890
241
244
96.4
97.6
G
G
446
594
2.3
1.7
2.6
2.0
93.0
92.4
94.1
93.0
94.1
93.0
0.67
0.73
0.77
0.80
0.83
0.83
1.25
1.25
73.6255
87.2598
49
29
108
64
1544
1724
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
125
150
200
250
300
350
400
kW
90
110
150
185
220
260
300
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
444/5TS
3560
263
105
178
2.0
2.5
92.4
94.1
94.5
0.84
0.90
0.91
1.15
27.9231
72
158
1625
444/5T
444/5T
1780
1185
275
283
110
113
G
G
356
535
2.0
2.1
2.2
2.3
93.6
93.6
94.5
94.1
94.5
94.1
0.81
0.74
0.85
0.80
0.87
0.85
1.15
1.15
45.7302
87.2598
37
40
81
88
1471
1874
447T*
504/5T
890
890
290
290
116
116
G
G
713
713
1.7
1.7
2.0
2.0
93.0
93.0
93.6
93.6
93.6
93.6
0.73
0.73
0.80
0.80
0.83
0.83
1.15
1.15
103.621
103.621
30
30
66
66
2044
2044
444/5TS
444/5T
3570
1780
320
335
128
134
F
G
217
436
2.0
2.2
2.5
2.3
92.4
94.1
94.1
95.0
94.5
95.0
0.84
0.81
0.90
0.86
0.91
0.87
1.15
1.15
33.5078
57.1628
75
33
165
73
1689
1665
447T*
504/5T
1185
1185
343
343
137
137
G
G
654
654
2.2
2.2
2.2
2.2
94.5
94.5
95.0
95.0
95.0
95.0
0.74
0.74
0.82
0.82
0.85
0.85
1.15
1.15
103.621
103.621
40
40
88
88
1969
1969
447T*
504/5T
890
890
355
355
142
142
G
G
871
871
1.7
1.7
2.0
2.0
93.0
93.0
93.6
93.6
93.6
93.6
0.72
0.72
0.80
0.80
0.83
0.83
1.15
1.15
125.436
125.436
18
18
40
40
2273
2273
447TS*
504/5TS
3570
3570
435
435
174
174
G
G
296
296
2.2
2.2
2.6
2.6
93.6
93.6
94.5
94.5
95.0
95.0
0.85
0.85
0.90
0.90
0.91
0.91
1.15
1.15
44.677
44.677
74
74
163
163
1874
1874
447T*
504/5T
1780
1780
460
460
184
184
G
G
594
594
2.3
2.3
2.4
2.4
94.1
94.1
95.0
95.0
95.0
95.0
0.80
0.80
0.84
0.84
0.86
0.86
1.15
1.15
70.5008
70.5008
23
23
51
51
1996
1996
447T*
504/5T
1185
1185
473
473
189
189
G
G
892
892
2.4
2.4
2.4
2.4
94.5
94.5
95.0
95.0
95.0
95.0
0.73
0.73
0.80
0.80
0.84
0.84
1.15
1.15
125.436
125.436
32
32
70
70
2269
2269
586/7T
447TS*
890
3570
525
535
210
214
G
G
1188
365
1.0
2.0
2.1
2.5
93.6
93.6
94.1
95.4
94.5
95.4
0.60
0.88
0.71
0.90
0.76
0.91
1.00
1.15
350.2194 65
51.3786 34
143
75
3815
2068
504/5TS
447T*
3570
1780
535
565
214
226
G
G
365
732
2.0
2.1
2.5
2.3
93.6
94.5
95.4
95.0
95.4
95.4
0.88
0.81
0.90
0.85
0.91
0.86
1.15
1.15
51.3786
89.555
34
22
75
48
2068
2315
504/5T
5008T*
1780
1190
565
560
226
224
G
G
732
1096
2.1
1.7
2.3
2.4
94.5
94.7
95.0
95.3
95.4
95.1
0.81
0.73
0.85
0.82
0.86
0.86
1.15
1.15
89.555 22
190.5571 15
48
33
2315
2977
586/7T
586/7T
1190
890
610
635
244
254
G
G
1096
1465
1.8
1.0
2.1
2.1
93.0
93.6
94.1
94.1
95.0
95.0
0.68
0.60
0.76
0.71
0.80
0.77
1.15
1.15
226.1775 74
387.4767 26
163
57
3605
4245
5008TS*
586/7TS
3570
3570
688
650
275
260
F
G
434
434
1.8
1.1
2.5
2.0
92.3
94.1
94.0
95.0
94.5
95.4
0.77
0.87
0.84
0.88
0.85
0.89
1.15
1.15
62.3031 32
122.7091 34
70
75
3153
2977
586/7T
5008T*
1790
1785
673
685
269
274
G
G
866
869
1.8
2.0
2.1
3.0
94.5
93.5
95.0
94.7
95.4
95.0
0.81
0.73
0.85
0.81
0.86
0.85
1.15
1.15
176.9459 56
97.8877 25
123
55
3440
2677
5008T*
586/7T
1190
1190
660
728
264
291
G
G
1303
1303
1.6
1.8
2.1
2.1
95.3
93.0
95.5
94.1
95.1
95.0
0.78
0.69
0.84
0.76
0.87
0.80
1.15
1.15
222.3167 15
277.0674 75
33
165
3343
4090
586/7T*
5008TS*
890
3570
755
1995
302
798
G
F
1742
513
1.0
1.8
2.0
2.5
93.6
93.4
94.1
94.8
95.0
95.1
0.60
0.79
0.62
0.85
0.77
0.86
1.15
1.15
461.9914 24
71.2019 61
53
134
4476
3169
586/7TS
586/7T
3570
1790
768
795
307
318
G
G
513
1024
1.0
1.8
2.0
2.1
94.1
94.5
95.0
95.0
95.4
95.4
0.87
0.81
0.88
0.85
0.89
0.86
1.15
1.15
136.3435 35
185.7932 38
77
84
3208
3903
5008T*
5008T*
1785
1190
783
780
313
312
F
G
1027
1540
2.0
1.6
2.8
2.0
94.3
95.7
95.2
95.7
95.3
95.1
0.77
0.80
0.84
0.86
0.87
0.87
1.15
1.15
111.8715 21
254.0771 15
46
33
2930
3722
586/7T
586/7T*
1190
890
855
880
342
352
G
G
1540
2059
1.8
1.1
2.0
2.0
93.0
93.6
94.1
94.1
95.4
95.0
0.70
0.60
0.77
0.64
0.80
0.78
1.15
1.00
327.9573 73
484.3459 25
161
55
4322
4631
586/7T
5008T*
1790
1785
918
885
367
354
G
F
1181
1184
1.8
2.0
2.0
2.7
94.5
94.7
95.0
95.4
95.4
95.4
0.81
0.79
0.85
0.85
0.86
0.88
1.15
1.15
199.0641 34
125.8556 22
75
48
4289
3206
586/7T
586/7T
1190
1790
988
1010
395
404
G
G
1777
1299
1.8
1.8
2.0
2.0
93.0
94.5
94.1
95.0
95.4
95.4
0.70
0.81
0.78
0.85
0.80
0.86
1.15
1.15
367.5384 62
221.1824 32
136
70
4564
4807
450
330
5008T*
586/7T*
1785
1190
988
1085
395
434
F
G
1303
1954
2.0
1.5
2.7
2.1
95.0
93.0
95.6
94.1
95.6
95.4
0.80
0.70
0.86
0.78
0.88
0.80
1.10
1.00
139.8395 22
367.5384 34
48
75
3468
4851
500
370
586/7T
1790
1128
451
1457
1.8
2.1
94.5
95.4
95.8
0.82
0.85
0.86
1.00
265.4189 35
77
5027
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
* Valid only for General Purpose
25
ELECTRICAL DATA
Rated
Output
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
1.5
ELECTRICAL DATA
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
125
26
kW
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
Locked BreakRotor
Down
cy
ien
c
i
f
Ef E &
um T, CE els
i
v
m C
Pre EPA ff. Le
Top eets ille E
M nev
n
Bo
Allowable
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143T
3495
2.73
1.09
1.51
3.0
4.0
78.5
82.5
84.0
0.65
0.76
0.82
1.25
0.03735
40
88
40
143T
145T
1765
1165
2.85
3.40
1.14
1.36
L
L
2.99
4.54
2.9
2.3
4.0
3.0
80.0
81.5
84.0
84.0
85.5
84.0
0.58
0.45
0.71
0.57
0.77
0.66
1.25
1.25
0.09312
0.13303
20
13
44
29
44
44
182T
143T
875
3495
4.60
3.85
1.84
1.54
M
L
6.04
2.22
3.0
3.0
3.5
4.0
74.0
80.0
77.0
85.5
78.5
86.5
0.32
0.65
0.42
0.86
0.52
0.83
1.25
1.25
0.39926
0.04312
22
20
48
44
95
42
145T
182T
1760
1165
4.00
4.78
1.60
1.91
L
M
4.40
6.65
2.7
3.2
3.8
4.0
84.0
84.0
85.5
86.5
86.5
87.5
0.63
0.45
0.74
0.56
0.80
0.66
1.25
1.25
0.11972
0.44363
15
16
33
35
51
64
184T
145T
860
3480
5.40
5.25
2.16
2.10
J
L
9.01
3.04
2.5
3.5
2.6
4.0
80.0
84.0
82.5
85.5
82.5
86.5
0.43
0.68
0.54
0.77
0.62
0.83
1.25
1.25
0.44363
0.04886
17
21
37
46
111
44
145T
184T
1750
1165
5.25
6.45
2.10
2.58
K
L
6.04
9.07
2.5
3.0
3.2
3.0
85.5
86.5
87.5
88.5
86.5
88.5
0.66
0.46
0.77
0.58
0.83
0.66
1.25
1.25
0.13303
0.53236
12
31
26
68
53
75
213T
182T
870
3500
6.88
7.10
2.75
2.84
L
K
12.20
4.43
2.4
2.5
2.9
4.0
82.5
82.5
85.5
85.5
85.5
87.5
0.45
0.79
0.51
0.86
0.64
0.89
1.25
1.25
1.19089
0.15443
16
43
35
95
141
90
182T
213T
1765
1170
7.53
8.35
3.01
3.34
J
J
8.78
13.3
2.5
2.2
3.2
2.5
87.5
88.5
89.5
89.5
89.5
89.5
0.67
0.58
0.77
0.68
0.82
0.74
1.25
1.25
0.31782
1.01192
33 73
58 128
88
110
215T
184T
860
3480
8.65
11.5
3.46
4.61
K
H
18.0
7.49
2.0
2.4
2.1
3.5
84.0
87.5
85.5
88.5
84.0
89.5
0.60
0.84
0.71
0.89
0.76
0.90
1.25
1.25
1.78632
0.19988
16
29
35
64
153
105
184T
215T
1750
1160
12.4
13.7
4.94
5.46
J
H
14.9
22.5
2.1
1.9
3.0
2.1
88.5
89.5
90.2
90.2
89.5
89.5
0.73
0.63
0.81
0.73
0.84
0.76
1.25
1.25
0.38136
1.47173
20 44
48 106
93
162
254T
213T
880
3510
15.8
17.3
6.31
6.90
H
G
29.6
11.0
2.1
2.3
2.9
2.8
83.4
89.5
86.0
90.2
86.6
91.0
0.46
0.82
0.59
0.87
0.68
0.88
1.25
1.25
2.89729
0.57664
21
26
46
57
218
121
213T
254T
1765
1170
17.9
19.3
7.17
7.72
G
H
22.0
33.1
2.0
2.3
2.4
3.1
91.0
89.5
91.7
91.0
91.7
91.7
0.72
0.58
0.81
0.71
0.84
0.78
1.25
1.25
1.1959
2.386
16
11
35
24
146
236
256T
215T
875
3500
23.4
23.1
9.35
9.23
H
G
44.3
15.1
2.0
2.0
2.8
2.6
84.2
91.0
86.6
91.7
86.9
91.7
0.49
0.80
0.60
0.88
0.68
0.89
1.25
1.25
3.40858
0.75414
23
17
51
37
276
160
215T
256T
1765
1170
24.3
26.3
9.70
10.5
H
J
29.9
45.2
2.3
2.3
2.6
2.9
91.7
90.2
92.4
91.7
92.4
91.7
0.73
0.60
0.81
0.67
0.84
0.78
1.25
1.25
1.3799
2.89729
17
22
37
48
152
279
284T
254T
880
3520
27.3
33.8
10.9
13.5
H
F
60.1
22.0
2.5
2.0
2.4
2.7
91.0
91.0
91.7
91.7
91.0
91.7
0.58
0.85
0.70
0.88
0.76
0.89
1.25
1.25
7.19918
1.25653
53 117
33 73
373
254
254T
284T
1765
1180
35.0
34.3
14.0
13.7
G
G
43.9
65.7
2.5
2.3
2.5
2.5
92.4
91.7
93.0
92.4
93.0
92.4
0.73
0.78
0.81
0.84
0.85
0.87
1.25
1.25
2.1436
7.19918
27
33
59
73
240
306
286T
256T
880
3520
38.0
45.8
15.2
18.3
G
G
88.1
30.0
2.4
2.0
2.3
2.5
91.0
91.7
91.7
92.4
91.0
92.4
0.66
0.85
0.76
0.89
0.80
0.89
1.25
1.25
8.18089
1.53576
37
25
81
55
423
287
256T
286T
1765
1175
47.0
46.8
18.8
18.7
G
G
59.9
90.0
2.5
2.3
2.5
2.5
92.4
93.0
93.0
93.0
93.0
92.4
0.75
0.79
0.83
0.85
0.86
0.87
1.25
1.25
2.38178
8.18089
19
31
42
68
273
430
324T
284TS
880
3520
55.0
56.8
22.0
22.7
G
G
120
37.0
2.3
2.2
2.3
2.8
91.7
91.7
92.4
92.4
92.4
93.0
0.56
0.82
0.67
0.86
0.74
0.88
1.25
1.25
9.36495
2.89729
25 55
58 128
512
313
284T
324T
1775
1175
59.8
59.5
23.9
23.8
G
F
73.5
111
2.3
2.2
2.3
2.4
92.4
93.0
93.6
93.6
93.6
93.0
0.71
0.71
0.80
0.80
0.83
0.84
1.25
1.25
4.68264
10.2163
35 77
56 123
364
527
326T
286TS
880
3530
70.8
66.8
28.3
26.7
G
G
148
43.9
2.6
2.4
2.9
3.0
91.0
91.7
92.4
93.0
92.4
93.0
0.51
0.85
0.63
0.89
0.71
0.89
1.25
1.25
11.919
3.57901
20 44
65 143
587
388
286T
326T
1775
1175
70.3
71.0
28.1
28.4
F
G
87.4
132
2.5
2.3
2.3
2.5
93.0
93.0
93.6
93.6
93.6
93.6
0.75
0.68
0.82
0.78
0.84
0.83
1.25
1.25
5.32122
11.919
53 117
35 77
408
580
364/5T
324TS
885
3550
77.0
89.5
30.8
35.8
G
G
175
59.6
2.2
2.2
2.2
2.2
92.4
92.4
93.0
93.6
93.0
93.6
0.64
0.86
0.73
0.89
0.77
0.90
1.25
1.25
23.4554
4.89559
14 31
46 101
882
516
324T
364/5T
1770
1175
94.8
94.3
37.9
37.7
G
G
119
180
2.3
2.3
2.3
2.3
93.0
93.6
94.5
94.1
94.5
94.1
0.75
0.75
0.82
0.82
0.84
0.85
1.25
1.25
7.85366
23.4554
25
24
55
53
542
882
364/5T
326TS
885
3550
105
111
41.8
44.4
G
F
239
73.5
2.2
2.1
2.2
2.1
93.0
92.4
93.6
93.6
93.6
94.1
0.64
0.86
0.73
0.88
0.77
0.89
1.25
1.25
29.0401
5.32131
15
33
33
73
953
549
326T
364/5T
1770
1180
117
116
46.8
46.4
G
G
147
221
2.2
2.5
2.3
2.7
94.1
94.1
94.5
94.5
94.5
94.1
0.75
0.73
0.82
0.81
0.84
0.85
1.25
1.25
9.1626
29.0401
22
31
48
68
595
882
404/5T
364/5TS
885
3560
136
134
54.4
53.4
G
G
295
89.1
2.2
2.0
2.1
2.5
92.4
92.4
93.0
93.6
93.6
94.1
0.67
0.79
0.73
0.86
0.73
0.90
1.25
1.25
32.3908
8.51359
11
19
24
42
1140
807
364/5T
404/5T
1770
1180
138
141
55.3
56.3
F
G
179
269
2.1
2.5
2.2
2.7
94.1
93.6
95.0
94.5
95.0
94.5
0.80
0.73
0.85
0.82
0.86
0.85
1.25
1.25
17.4383
34.6247
21
29
46
64
853
1067
404/5T
364/5TS
885
3560
154
165
61.5
66.1
G
F
358
109
1.7
2.0
2.1
2.1
92.4
93.6
93.6
94.5
93.0
95.0
0.69
0.80
0.75
0.87
0.79
0.88
1.25
1.25
36.8586
9.79062
13
13
29
29
1308
915
364/5T
404/5T
1775
1180
166
173
66.5
69.2
F
G
218
328
2.3
2.5
2.4
2.6
94.1
94.1
95.0
95.0
95.4
95.0
0.80
0.72
0.85
0.81
0.87
0.84
1.25
1.25
19.9295
36.8586
21
15
46
33
900
1136
444/5T
404/5TS
890
3560
180
220
72.0
88.1
G
F
436
148
1.7
2.0
2.1
2.6
93.6
93.6
94.1
95.0
93.6
95.0
0.72
0.80
0.79
0.88
0.82
0.90
1.25
1.25
73.6255
11.919
18
9
40
20
1484
1206
404/5T
444/5T
1775
1185
230
241
91.8
96.3
G
G
298
446
2.1
2.3
2.2
2.6
94.5
94.5
95.4
95.0
95.4
95.4
0.79
0.66
0.85
0.76
0.86
0.82
1.25
1.25
27.4031
73.6255
18 40
49 108
1118
1544
444/5T
444/5TS
890
3560
244
263
97.6
105
G
F
594
178
1.7
2.0
2.0
2.5
94.1
93.6
94.5
94.5
94.1
95.4
0.72
0.83
0.79
0.89
0.82
0.90
1.25
1.15
87.2598
27.9231
16
22
35
48
1724
1618
444/5T
444/5T
1780
1185
275
283
110
113
G
G
356
535
2.0
2.1
2.2
2.3
95.0
94.5
95.4
95.0
95.4
95.4
0.80
0.73
0.84
0.79
0.86
0.84
1.15
1.15
45.7302
87.2598
18
41
40
90
1471
4132
504/5T
890
293
117
713
1.7
2.0
94.5
95.0
94.5
0.72
0.79
0.82
1.15
103.621
18
40
2044
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
kW
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
444/5TS
444/5T
3570
1780
323
335
129
134
F
G
217
436
2.0
2.2
2.5
2.3
93.6
95.0
95.0
95.8
95.4
95.8
0.83
0.80
0.89
0.85
0.90
0.86
1.15
1.15
33.5078
57.1628
31
22
68
48
1689
1665
504/5T
504/5T
1185
890
343
358
137
143
G
G
654
871
2.2
1.7
2.2
2.0
95.0
94.5
95.8
95.0
95.8
94.5
0.74
0.71
0.82
0.79
0.85
0.82
1.15
1.15
103.621
125.436
18
18
40
40
1969
2273
504/5TS
504/5T
3570
1780
443
455
177
182
G
G
296
594
2.2
2.3
2.6
2.4
94.1
95.8
95.4
96.2
95.8
96.2
0.84
0.78
0.88
0.84
0.89
0.86
1.15
1.15
44.677
70.5008
37
25
81
55
1874
1996
504/5T
586/7T
1185
890
468
523
187
209
G
G
892
1188
2.4
1.0
2.4
2.1
94.5
94.1
95.4
94.5
95.8
95.0
0.72
0.60
0.79
0.71
0.84
0.76
1.15
1.15
125.436
350.2193
30
28
66
62
2269
3815
504/5TS
504/5T
3580
1780
538
568
215
227
G
G
364
732
2.0
2.1
2.5
2.3
95.0
95.4
95.4
96.2
95.8
96.2
0.87
0.80
0.89
0.84
0.90
0.85
1.15
1.15
50.2617
89.555
34
30
75
66
2068
2216
586/7T
586/7T
1190
890
605
633
242
253
G
G
1096
1465
1.8
1.0
2.1
2.1
93.6
94.1
95.0
94.5
95.4
95.4
0.67
0.60
0.75
0.71
0.80
0.77
1.15
1.15
226.1775
387.4767
33
26
73
57
3605
4242
586/7TS
586/7T
3570
1790
655
675
262
270
G
G
434
866
1.1
1.8
2.0
2.1
94.5
95.0
95.4
95.8
95.8
96.2
0.86
0.80
0.87
0.84
0.88
0.85
1.15
1.15
122.7091
176.9459
34
26
75
57
2977
3440
586/7T
586/7T
1190
890
703
753
281
301
G
G
1303
1742
1.8
1.0
2.1
2.0
93.6
94.1
95.0
94.5
95.4
95.4
0.68
0.60
0.75
0.62
0.82
0.77
1.15
1.15
277.0674
461.9914
35
24
77
53
4090
4476
586/7TS
586/7T
3570
1790
775
798
310
319
G
G
513
1024
1.0
1.8
2.0
2.1
94.5
95.0
95.4
95.8
95.8
96.2
0.86
0.80
0.87
0.84
0.88
0.85
1.15
1.15
136.3435
185.7932
35
24
77
53
3208
3903
586/7T
586/7T
1190
890
853
878
341
351
G
G
1540
2059
1.8
1.1
2.0
2.0
93.6
94.1
95.0
94.5
95.8
95.4
0.69
0.60
0.76
0.64
0.80
0.78
1.15
1.00
327.9573
484.3459
30
25
66
55
4326
4631
300
586/7T
586/7T
1790
1190
920
983
368
393
G
G
1181
1777
1.8
1.8
2.0
2.0
95.0
93.6
95.8
95.0
96.2
95.8
0.80
0.69
0.84
0.77
0.85
0.80
1.15
1.15
199.0641
367.5384
18
32
40
70
4289
4564
450
330
586/7T
586/7T
1790
1190
1013
1080
405
432
G
G
1299
1954
1.8
1.5
2.0
2.1
95.0
93.6
95.8
95.0
96.2
95.8
0.80
0.69
0.84
0.77
0.85
0.80
1.15
1.00
221.1824
367.5384
24
34
53
75
4807
4851
500
370
586/7T
1790
1135
454
1457
1.8
2.1
95.0
95.8
96.2
0.81
0.84
0.85
1.00
265.4189
25
55
5027
150
110
200
150
250
185
300
220
350
260
400
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
27
ELECTRICAL DATA
Rated
Output
NEMA
Frame
Full
Load
Current
RPM
Moment
Approx.
or
Weight
Inertia
Wk2
Lb
Lb . Ft2
Locked Service
Factor
Rotor
Current
S F
HP
kW
10/7.5/5
15/10/7.5
7.5/5.5/3.7
11/7.5/5.5
256T
284T
1120/1120/1120
1125/1125/1120
13/10/6.5
19/13/10
K
J
1.15
1.15
3.42
7.95
286
396
20/15/10
25/20/15
15/11/7.5
18.5/15/11
286T
324T
1120/1115/1125
1115/1115/1115
25/19/13
30/25/19
J
K
1.15
1.15
8.85
11
429
539
30/25/20
40/30/25
22/18.5/15
30/22/18.5
326T
364/5T
1120/1120/1120
1130/1130/1130
38/32/27
53/36/30
J
H
1.15
1.15
12.2
24
583
847
50/40/30
37/30/22
404/5T
1130/1130/1130
63/53/36
1.15
30
990
460V
ELECTRICAL DATA
The values shown are subject to change without prior notice. To obtain guaranteed values,
please contact our nearest sales office.
Full
Locked
Full
Locked
Rated
Load
Rotor
Load
Rotor
Speed
Current
Frame
HP
kW
Allowable
Efficiency
Power Factor
Cos
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
% of full load
SF
50
75
100
50
75
100
Locked
Approx.
of
Rotor
Weight
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Lb
3.0
2.2
215T
1110
10.0
4.0
10.3259
4.0
70.0
74.0
75.7
0.55
0.65
0.73
1.15
21.1582
19
42
253
5.0
7.5
3.7
5.5
215T
254T
1080
1125
14.4
18.5
5.8
7.4
J
H
17.7015
25.4459
3.8
4.0
77.5
80.1
78.1
85.3
77.5
85.6
0.68
0.75
0.77
0.83
0.83
0.87
1.15
1.15
31.7377
70.5576
25
14
55
31
354
559
10
15
7.5
11
256T
284T
1120
1130
25.0
36.0
10.0
14.4
H
G
34.1491
50.7442
3.3
4.0
82.0
83.0
84.9
86.9
85.6
87.1
0.75
0.76
0.84
0.84
0.88
0.88
1.15
1.15
101.9165
165.5811
19
27
42
59
660
913
20
25
15
18.5
286T
324T
1120
1135
49.0
60.0
19.6
24.0
G
G
68.2244
84.0820
3.2
3.2
82.0
85.0
87.0
88.0
87.3
88.9
0.78
0.75
0.85
0.83
0.88
0.87
1.15
1.15
180.6342
244.7660
23
16
51
35
986
1236
30
40
22
30
326T
364/5T
1135
1130
71.0
105
28.4
42.0
G
G
101.0459
134.9737
3.2
2.9
85.6
85.0
89.0
87.0
89.4
87.5
0.76
0.75
0.83
0.80
0.87
0.82
1.15
1.15
274.1370
616.5426
16
34
35
75
1344
1848
50
60
37
45
404/5T
404/5T
1135
1140
124
157
49.6
62.8
G
G
168.1639
201.3542
3.0
3.0
84.0
85.0
87.0
88.0
88.1
89.0
0.74
0.73
0.81
0.79
0.85
0.81
1.15
1.15
847.7478
847.7478
18
28
40
62
2275
2959
75
100
55
75
444/5T
444/5T
1130
1125
180
240
72.0
96.0
F
G
253.7210
340.0156
3.0
3.0
80.0
86.0
86.0
89.0
87.0
88.0
0.80
0.83
0.85
0.87
0.88
0.89
1.15
1.00
1693.3865
2383.2830
73
51
161
112
3397
4099
Rated
Output
IEC
Full
Locked
Full
Break-
Rated
Load
Rotor
Load
Down
Speed
Current
Frame
HP
kW
Approx.
Weight
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tb/Tn
Lb
3.0
2.2
80S-MS
3500
9.6
3.8
6.0
3.7
95
5.0
3.7
80S-MS
3500
14.0
5.7
10.0
4.2
106
7.5
5.5
80L-MS
3500
21.0
8.5
15.1
4.8
128
10
7.5
90L-MS
3470
26.0
11.0
20.2
4.2
154
28
Service Moment
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
kW
0.75
1.5
1.1
2.0
1.5
3.0
2.2
5.0
3.7
7.5
5.5
10
7.5
15
11
20
15
25
18.5
30
22
40
30
50
37
60
45
75
55
100
75
125
90
150
110
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 460V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
E143 JM or JP
1730
2.82
1.13
3.06
3.3
3.2
80.0
81.5
82.5
0.61
0.74
0.81
1.15
0.12719
10
22
33
E143 JM or JP
3405
3.90
1.56
2.28
3.0
3.5
80.0
81.5
82.5
0.70
0.80
0.86
1.15
0.04518
15
33
29
E145 JM or JP
1730
3.96
1.58
4.48
3.5
3.2
82.5
84.0
84.0
0.64
0.76
0.83
1.15
0.14537
11
24
37
E145 JM or JP
3410
5.04
2.02
3.10
3.0
3.5
81.5
82.5
84.0
0.78
0.86
0.89
1.15
0.0616
12
26
40
E145 JM or JP
1715
5.16
2.06
6.16
3.0
3.0
82.5
84.0
84.0
0.71
0.82
0.87
1.15
0.16352
10
22
40
F145 JM or JP
3400
7.30
2.92
4.56
3.5
3.4
81.5
82.5
84.0
0.80
0.88
0.90
1.15
0.07392
20
46
182 JM or JP
1760
7.88
3.15
8.81
2.4
3.0
82.5
85.5
86.5
0.62
0.74
0.81
1.15
0.25424
14
31
47
182 JM or JP
3480
12.3
4.94
7.49
2.0
2.9
84.0
85.5
85.5
0.75
0.83
0.88
1.15
0.12719
12
26
48
184 JM or JP
1755
12.8
5.11
14.9
2.1
3.0
84.0
86.5
87.5
0.66
0.77
0.83
1.15
0.31782
13
29
60
184 JM or JP
3485
17.9
7.18
11.1
2.3
3.0
86.5
87.5
87.5
0.78
0.85
0.88
1.15
0.16352
11
24
60
213 JM or JP
1755
18.8
7.52
22.1
1.8
2.5
85.5
87.5
88.5
0.68
0.78
0.83
1.15
0.68995
18
72
213 JM or JP
3500
23.6
9.44
15.1
2.2
2.3
86.5
88.5
88.5
0.78
0.86
0.90
1.15
0.44363
12
26
95
215 JM or JP
1760
25.4
10.2
30.0
1.8
2.3
86.5
88.5
89.5
0.67
0.78
0.83
1.15
1.01192
20
96
215 JM or JP
3500
34.2
13.7
22.1
2.1
3.1
88.5
89.5
89.5
0.84
0.89
0.90
1.15
0.57673
14
31
126
254 JM or JP
1765
37.4
15.0
43.9
2.2
2.5
89.5
90.2
91.0
0.65
0.75
0.81
1.15
1.54815
14
31
221
254 JM or JP
3530
49.2
19.7
29.9
2.0
2.5
88.5
90.2
90.2
0.75
0.80
0.85
1.15
0.73297
10
22
179
256 JM or JP
1765
50.4
20.2
59.9
2.2
2.5
89.5
89.5
91.0
0.66
0.77
0.82
1.15
1.90542
12
26
273
256 JM or JP
3530
58.6
23.4
36.9
2.0
2.5
89.5
90.2
91.0
0.76
0.85
0.87
1.15
0.90748
10
22
225
284 JM or JP
1765
61.8
24.7
73.9
2.5
3.0
90.2
91.7
91.7
0.63
0.76
0.82
1.15
2.66066
13
29
293
284 JM or JP
3540
66.0
26.4
43.8
2.0
2.7
90.2
91.7
92.4
0.84
0.89
0.90
1.15
2.386
12
26
333
286 JM or JP
1770
71.2
28.5
87.6
2.5
3.1
90.2
91.7
92.4
0.75
0.81
0.84
1.15
3.40563
13
29
379
286 JM or JP
3535
89.6
35.8
59.8
1.8
2.4
91.7
92.4
92.4
0.85
0.90
0.91
1.15
2.98251
10
22
417
324 JM or JP
1765
96.4
38.6
120
1.8
2.0
91.7
92.4
93.0
0.74
0.82
0.84
1.15
5.07214
21
46
450
324 JM or JP
3550
110.2
44.1
73.5
2.0
2.7
91.7
93.0
93.6
0.80
0.88
0.90
1.15
3.51206
24
53
478
326 JM or JP
1765
117.4
47.0
148
2.0
2.1
92.4
93.0
93.0
0.74
0.82
0.85
1.15
6.05385
18
40
538
326 JM or JP
3550
133.4
53.4
89.3
2.0
2.8
92.4
93.6
94.1
0.82
0.88
0.90
1.15
4.15061
19
42
564
364/5 JM or JP
1770
140.4
56.2
179
2.2
2.6
91.7
93.0
93.6
0.74
0.84
0.86
1.15
12.4559
16
35
633
364/5 JM or JP
3550
161.2
64.5
109
1.8
2.8
93.0
94.1
94.1
0.84
0.90
0.91
1.15
6.81087
15
33
695
364/5 JM or JP
1780
170.6
68.2
218
2.4
2.8
93.0
93.6
94.1
0.74
0.82
0.86
1.15
16.1927
17
37
825
364/5 JM or JP
3550
220
88.0
149
1.9
3.0
93.6
94.1
94.1
0.86
0.91
0.91
1.15
8.30075
13
29
825
404/5 JP
1775
230
92.0
298
2.4
2.5
93.0
93.6
94.1
0.74
0.84
0.87
1.15
19.5143
10
22
882
404/5 JP
3555
264
105.6
178
1.8
3.0
93.6
94.1
94.1
0.87
0.91
0.91
1.15
9.36495
11
24
931
404/5 JP
1775
274
109.6
357
2.4
2.6
93.0
94.1
94.5
0.75
0.84
0.87
1.15
20.7599
11
24
1052
404/5 JP
3555
318
127.2
218
2.1
3.2
93.6
94.1
94.5
0.87
0.91
0.92
1.15
10.2163
10
22
1014
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
29
ELECTRICAL DATA
Rated
Output
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
ELECTRICAL DATA
HP
kW
1.0
0.75
1.5
1.1
2.0
1.5
3.0
2.2
5.0
7.5
10
15
3.7
5.5
7.5
11
20
15
25
18.5
30
22
40
30
50
37
60
45
75
55
100
75
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143 JM or JP
143 JM or JP
1720
3435
3.32
4.09
1.33
1.64
J
H
3.07
2.26
2.8
2.1
3.0
2.6
68.0
74.0
74.0
77.0
75.5
78.5
0.53
0.78
0.65
0.84
0.75
0.86
1.15
1.15
0.0798
0.03735
6
9
13
20
33
37
145 JM or JP
145 JM or JP
1710
3430
4.69
5.41
1.88
2.16
J
H
4.53
3.08
2.5
2.2
2.9
2.4
72.0
75.5
77.0
78.5
80.0
80.0
0.53
0.76
0.63
0.83
0.75
0.87
1.15
1.15
0.0798
0.03735
5
7
11
15
37
41
145 JM or JP
182 JM or JP
1720
3510
6.32
8.26
2.53
3.30
J
K
6.15
4.42
3.0
2.3
3.0
3.0
74.0
74.0
78.5
78.5
81.5
81.5
0.58
0.70
0.69
0.78
0.75
0.82
1.15
1.15
0.11972
0.14537
5
6
11
13
44
79
W182/4 JM or JP3470
#145 JM or JP 3450
7.99
8.10
3.20
3.24
J
J
4.47
4.49
2.6
2.8
3.0
3.0
74.0
77.5
75.5
79.3
78.5
78.4
0.74
0.73
0.82
0.83
0.88
0.87
1.15
1.15
0.0798
0.04886
6
8
13
18
42
46
182 JM or JP
1750
W182/4 JM or JP1720
8.16
8.42
3.26
3.37
K
J
8.86
9.01
2.6
2.7
2.9
2.8
75.5
77.0
78.5
78.5
81.5
80.0
0.65
0.63
0.74
0.74
0.83
0.82
1.15
1.15
0.28602
0.14537
5
6
11
13
64
55
W182/4 JM or JP3490
182 JM or JP
3460
12.9
12.8
5.16
5.12
K
H
7.47
7.54
3.0
2.2
3.5
2.7
75.5
78.0
80.0
83.5
82.5
83.5
0.73
0.76
0.82
0.81
0.87
0.87
1.15
1.15
0.13303
0.17252
5
9
11
20
68
79
184 JM or JP
182 JM or JP
3460
1740
12.8
13.7
5.12
5.48
H
K
7.54
15.0
2.2
2.5
2.7
2.6
78.0
78.5
83.5
81.5
83.5
84.0
0.76
0.67
0.81
0.76
0.87
0.81
1.15
1.15
0.17261
0.38134
9
5
20
11
84
88
184 JM or JP
1740
W182/4 JM or JP1720
13.9
13.7
5.56
5.48
K
K
15.0
15.2
2.5
3.0
2.6
3.5
78.5
78.5
81.5
80.0
84.0
82.5
0.67
0.70
0.76
0.81
0.81
0.82
1.15
1.15
0.38136
0.23621
5
6
11
13
93
73
213 JM or JP
3500
#184 JM or JP 3490
18.5
19.1
7.40
7.64
H
J
11.1
11.1
2.0
2.4
2.8
3.4
80.0
83.0
82.5
85.1
84.0
85.2
0.79
0.73
0.86
0.80
0.89
0.85
1.15
1.15
0.39926
0.19988
11
6
24
13
117
95
213 JM or JP
213 JM or JP
1760
3510
19.2
24.2
7.68
9.68
L
H
22.0
15.1
2.2
2.2
3.4
2.8
82.5
85.5
85.5
86.5
86.5
86.5
0.66
0.79
0.77
0.86
0.83
0.90
1.15
1.15
0.82794
0.48798
4
6
9
13
117
132
215 JM or JP
W213/5JP
3510
3510
24.5
24.2
9.80
9.68
H
H
15.1
15.1
2.2
2.2
2.8
2.8
84.0
85.5
85.5
86.5
85.5
86.5
0.79
0.81
0.86
0.88
0.90
0.90
1.15
1.15
0.48798
0.23621
6
8
13
18
132
135
213 JM or JP
215 JM or JP
1760
1760
28.1
27.9
11.2
11.2
J
J
30.0
30.0
2.3
2.3
3.0
3.0
80.8
80.0
83.8
84.0
86.9
87.5
0.71
0.71
0.75
0.75
0.77
0.77
1.15
1.15
1.01192
1.01192
5
5
11
11
132
132
254 JM or JP
3530
#215 JM or JP 3500
36.3
34.3
14.5
13.7
J
K
22.0
22.1
2.0
2.3
2.5
2.4
78.5
88.2
84.0
89.3
87.5
89.4
0.73
0.84
0.82
0.88
0.87
0.90
1.15
1.15
0.90748
0.66546
10
4
22
9
227
163
254 JM or JP
1760
#254 JM or JP 3540
37.1
49.5
14.8
19.8
G
J
44.0
29.9
2.0
2.1
2.3
3.0
85.5
87.5
87.5
88.5
88.5
88.5
0.70
0.75
0.80
0.84
0.84
0.86
1.15
1.15
1.54815
1.11673
11
7
24
15
216
247
256 JM or JP
256 JM or JP
3540
1760
49.5
51.3
19.8
20.5
J
G
29.9
60.1
2.1
2.1
3.0
2.3
87.5
86.5
88.5
87.5
88.5
88.5
0.75
0.68
0.84
0.79
0.86
0.83
1.15
1.15
1.11692
1.90542
7
9
15
20
251
247
284 JM or JP
3540
#256 JM or JP 3525
59.0
58.3
23.6
23.3
H
J
36.8
37.0
2.3
2.7
3.0
3.0
85.5
89.5
87.5
90.5
88.5
90.5
0.84
0.78
0.88
0.85
0.89
0.88
1.15
1.15
2.386
1.25653
6
8
13
18
306
280
284 JM or JP
1760
#284 JM or JP 3530
60.4
69.3
24.2
27.7
J
J
74.1
43.9
2.4
3.0
2.2
2.7
88.5
80.0
89.5
85.6
90.2
88.5
0.79
0.86
0.84
0.88
0.86
0.90
1.15
1.15
3.40563
2.8972
6
6
13
13
273
364
286 JM or JP
286 JM or JP
3530
1765
68.6
70.6
27.4
28.2
H
J
43.9
87.8
2.8
2.8
3.0
2.5
85.5
88.5
87.5
89.5
89.5
91.0
0.83
0.77
0.88
0.83
0.90
0.86
1.15
1.15
2.8972
3.83133
10
6
22
13
368
351
324 JM or JP
3560
#286 JM or JP 3550
94.0
94.8
37.6
37.9
J
K
59.4
59.6
2.9
3.0
2.5
3.0
85.0
88.0
89.5
89.5
91.0
90.3
0.80
0.84
0.85
0.87
0.88
0.88
1.15
1.00
4.04419
3.40858
10
7
22
15
397
364
324 JM or JP
1770
#324 JM or JP 3560
96.6
114
38.6
45.6
H
J
119
73.2
2.6
3.2
2.5
3.0
89.5
89.0
91.0
91.1
91.7
92.2
0.74
0.80
0.82
0.85
0.85
0.88
1.15
1.15
6.54471
4.89559
14
10
31
22
467
507
326 JM or JP
326 JM or JP
3560
1770
114
118
45.6
47.2
J
G
73.2
147
3.2
2.3
3.0
2.4
88.5
90.2
91.0
91.7
92.4
91.7
0.80
0.76
0.85
0.83
0.88
0.86
1.15
1.15
4.89559
7.85366
10
12
22
26
507
540
364/5 JP
3560
#326 JM or JP 3555
138
136
55.2
54.4
J
H
89.1
89.2
2.5
3.0
2.5
2.8
86.5
90.3
90.2
91.4
91.0
92.0
0.82
0.86
0.87
0.88
0.90
0.90
1.15
1.15
7.23653
5.32131
9
19
20
42
807
595
#326 JM or JP 1770
364/5 JM or JP 3560
145
168
58.0
67.2
H
J
179
109
2.2
2.8
2.4
3.0
90.2
89.5
91.7
91.7
91.7
92.4
0.75
0.81
0.82
0.87
0.85
0.89
1.15
1.15
9.1626
9.36495
6
7
13
15
595
847
364/5 JM or JP 1775
404/5 JP
3560
170
225
68.0
90.0
J
K
218
148
2.2
2.4
2.6
2.8
89.5
90.2
91.7
92.4
92.4
93.0
0.82
0.83
0.86
0.88
0.88
0.90
1.15
1.15
16.6079
11.919
7
7
15
15
836
977
236
94.4
297
3.0
3.0
89.5
91.7
92.4
0.75
0.82
0.86
1.15
23.2511
11
975
404/5 JP
1780
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
# Reduced Frames
30
Service Moment
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
kW
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143 JM or JP
143 JM or JP
1765
3495
2.90
3.98
1.16
1.59
L
L
2.99
2.22
2.8
3.0
3.9
4.0
75.5
75.5
80.0
81.5
82.5
82.5
0.60
0.69
0.73
0.78
0.79
0.84
1.25
1.25
0.09312
0.04312
16
18
35
40
44
42
145 JM or JP
145 JM or JP
1760
3480
4.00
5.20
1.60
2.08
L
L
4.40
3.04
2.6
3.5
3.7
4.0
80.0
80.0
82.5
82.5
84.0
84.0
0.65
0.70
0.76
0.81
0.82
0.86
1.25
1.25
0.11972
0.04886
12
13
26
29
51
44
145 JM or JP
182 JM or JP
1755
3500
5.28
7.18
2.11
2.87
K
K
6.02
4.43
2.4
2.5
3.2
4.0
81.5
80.0
84.0
82.5
84.0
85.5
0.68
0.80
0.79
0.87
0.85
0.90
1.25
1.25
0.13303
0.15443
12
23
26
51
53
90
2.2
#145 JM or JP
182 JM or JP
3450
1765
7.43
7.80
2.97
3.12
K
K
4.49
8.78
2.3
2.3
2.4
3.2
81.0
85.5
84.5
87.5
85.5
87.5
0.70
0.65
0.83
0.75
0.87
0.81
1.15
1.25
0.0546
0.31782
6
31
13
68
51
88
3.7
184 JM or JP
184 JM or JP
3480
1745
11.7
13.0
4.67
5.18
H
H
7.49
14.9
2.4
2.1
3.5
3.0
85.5
85.5
86.5
87.5
87.5
87.5
0.85
0.68
0.90
0.78
0.91
0.82
1.25
1.25
0.19988
0.38136
28
21
62
46
105
93
7.5
5.5
213 JM or JP
#184 JM or JP
3510
3460
17.3
17.5
6.93
7.01
G
H
11.0
11.2
2.2
2.2
3.0
2.3
86.5
85.5
88.5
87.5
88.5
88.5
0.80
0.81
0.88
0.87
0.90
0.89
1.25
1.15
0.42144
0.23621
25
15
55
33
121
119
10
7.5
213 JM or JP
215 JM or JP
1765
3500
18.8
23.1
7.52
9.25
H
G
22.0
15.1
2.0
2.0
2.6
2.6
87.5
88.5
89.5
89.5
89.5
89.5
0.66
0.86
0.77
0.90
0.82
0.91
1.25
1.25
1.01192
0.66546
21
19
46
42
137
160
215 JM or JP
254 JM or JP
1765
3520
25.5
34.0
10.2
13.6
H
F
29.9
22.0
2.0
2.0
2.6
2.7
88.5
89.5
90.2
90.2
90.2
90.2
0.69
0.86
0.79
0.89
0.82
0.90
1.25
1.25
1.3799
1.25653
19
33
42
73
152
254
15
11
#215 JM or JP
254 JM or JP
3500
1765
34.5
35.3
13.8
14.1
F
G
22.1
43.9
2.0
2.5
2.2
2.5
89.0
89.5
90.2
91.0
90.2
91.0
0.80
0.74
0.87
0.82
0.89
0.86
1.15
1.25
0.66546
2.1436
10
26
22
57
161
240
20
15
#254 JM or JP
256 JM or JP
3520
3520
46.5
46.5
18.6
18.6
G
G
30.0
30.0
1.8
2.0
2.2
2.5
89.5
89.5
90.5
90.2
90.2
90.2
0.86
0.86
0.90
0.90
0.90
0.90
1.25
1.25
1.39615
1.53576
21
21
46
46
278
287
256 JM or JP
#256 JM or JP
1765
3530
47.5
56.8
19.0
22.7
G
G
59.9
36.9
2.5
2.0
2.5
2.2
89.5
90.2
91.0
91.0
91.0
91.0
0.76
0.83
0.84
0.88
0.87
0.90
1.25
1.15
2.38178
1.53576
18
18
40
40
273
287
25
18.5
284 JM or JP
284 JM or JP
3520
1765
56.8
59.3
22.7
23.7
G
F
37.0
73.9
2.2
2.3
2.8
2.2
90.2
91.0
91.0
92.4
91.0
92.4
0.86
0.77
0.90
0.84
0.90
0.85
1.25
1.25
2.89729
3.83133
23 51
51 112
313
351
#284 JM or JP
286 JM or JP
3530
3530
67.5
67.5
27.0
27.0
G
G
43.9
43.9
2.4
2.4
3.0
3.0
90.2
90.2
91.0
91.0
91.0
91.0
0.85
0.87
0.90
0.90
0.90
0.90
1.25
1.25
3.57901
3.57901
64 141
60 132
379
388
286 JM or JP
324 JM or JP
1770
3550
70.3
90.3
28.1
36.1
F
G
87.6
59.6
2.5
2.2
2.3
2.2
91.0
90.2
92.4
91.7
92.4
91.7
0.76
0.87
0.83
0.90
0.85
0.91
1.25
1.25
4.68274
4.89559
47 103
46 101
397
516
#286 JM or JP
324 JM or JP
3540
1770
93.3
95.3
37.3
38.1
K
G
59.7
119
2.4
2.3
2.8
2.3
91.0
91.7
91.7
93.0
91.7
93.0
0.80
0.76
0.86
0.83
0.88
0.85
1.25
1.25
3.74934
7.85366
22
28
48
62
408
542
#324 JM or JP
326 JM or JP
3550
3550
111
111
44.2
44.2
G
G
73.5
73.5
2.1
2.1
2.1
2.1
91.0
91.0
92.4
92.4
92.4
92.4
0.88
0.88
0.90
0.90
0.91
0.91
1.25
1.25
5.32131
5.32131
33
33
73
73
520
549
326 JM or JP
364/5 JP or JP
1770
3560
116
134
46.2
53.4
G
G
147
89.1
2.3
2.0
2.3
2.5
92.4
91.0
93.6
92.4
93.6
93.0
0.77
0.80
0.83
0.87
0.86
0.91
1.25
1.25
9.1626
8.51359
25 55
61 134
595
807
#326 JM or JP
#326 JM or JP
3540
1770
138
142
55.2
56.8
G
G
89.6
179
2.2
2.1
2.0
2.3
91.0
91.7
92.4
93.6
93.0
93.6
0.83
0.75
0.87
0.83
0.88
0.85
1.15
1.25
5.32131
9.16239
30
20
66
44
549
595
364/5 JM or JP
364/5 JM or JP
1770
3560
136
163
54.2
65.3
F
F
179
109
2.1
2.0
2.2
2.1
92.4
91.0
93.6
93.0
93.6
93.0
0.83
0.80
0.87
0.88
0.89
0.91
1.25
1.25
17.4383
9.79062
23 51
46 101
853
915
364/5 JM or JP
404/5 JP
1775
3560
165
221
65.9
88.4
G
F
218
148
2.3
2.0
2.4
2.5
93.0
91.7
94.1
93.6
94.1
93.6
0.83
0.81
0.87
0.89
0.89
0.91
1.25
1.25
19.9295
11.9189
22
38
48
84
900
1206
404/5 JP
1775
229
91.6
298
2.1
2.2
93.6
94.5
94.5
0.80
0.86
0.87
1.25
27.4031
18
40
1118
1.0
0.75
1.5
1.1
1.5
30
22
40
30
50
37
60
45
75
55
100
75
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
# Reduced frames
31
ELECTRICAL DATA
Rated
Output
xxxRated
xxxOutput
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
0.75
1.5
1.1
2.0
1.5
3.0
5.0
ELECTRICAL DATA
kW
7.5
10
15
20
25
30
40
50
60
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
75
55
100
75
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked
Approx.
of
Rotor
Weight
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Lb
143HP
1720
3.32
1.33
3.07
2.8
3.0
68.0
74.0
75.5
0.53
0.65
0.75
1.15
0.0798
13
33
143HP
3435
4.09
1.64
2.26
2.1
2.6
74.0
77.0
78.5
0.78
0.84
0.86
1.15
0.03735
20
37
145HP
1710
4.69
1.88
4.53
2.5
2.9
72.0
77.0
80.0
0.53
0.63
0.75
1.15
0.0798
11
37
145HP
3430
5.41
2.16
3.08
2.2
2.4
75.5
78.5
80.0
0.76
0.83
0.87
1.15
0.03735
15
41
145HP
1720
6.32
2.53
6.15
3.0
3.0
74.0
78.5
81.5
0.58
0.69
0.75
1.15
0.11972
11
44
182HP
3510
8.26
3.30
4.42
2.3
3.0
74.0
78.5
81.5
0.70
0.78
0.82
1.15
0.14537
13
79
#145HP
3450
8.10
3.24
4.49
2.8
3.0
77.5
79.3
78.4
0.73
0.83
0.87
1.15
0.04886
18
46
182HP
1750
8.16
3.26
8.86
2.6
2.9
75.5
78.5
81.5
0.65
0.74
0.83
1.15
0.28602
11
64
182HP
3460
12.8
5.12
7.54
2.2
2.7
78.0
83.5
83.5
0.76
0.81
0.87
1.15
0.17252
20
79
184HP
3460
12.8
5.12
7.54
2.2
2.7
78.0
83.5
83.5
0.76
0.81
0.87
1.15
0.17261
20
84
182HP
1740
13.7
5.48
15.0
2.5
2.6
78.5
81.5
84.0
0.67
0.76
0.81
1.15
0.38134
11
88
184HP
1740
13.9
5.56
15.0
2.5
2.6
78.5
81.5
84.0
0.67
0.76
0.81
1.15
0.38136
11
93
213HP
3500
18.5
7.40
11.1
2.0
2.8
80.0
82.5
84.0
0.79
0.86
0.89
1.15
0.39926
11
24
117
#184HP
3490
19.1
7.64
11.1
2.4
3.4
83.0
85.1
85.2
0.73
0.80
0.85
1.15
0.19988
13
95
213HP
1760
19.2
7.68
22.0
2.2
3.4
82.5
85.5
86.5
0.66
0.77
0.83
1.15
0.82794
117
213HP
3510
24.2
9.68
15.1
2.2
2.8
85.5
86.5
86.5
0.79
0.86
0.90
1.15
0.48798
13
132
215HP
3510
24.5
9.80
15.1
2.2
2.8
84.0
85.5
85.5
0.79
0.86
0.90
1.15
0.48798
13
132
213HP
1760
28.1
11.2
30.0
2.3
3.0
80.8
83.8
86.9
0.71
0.75
0.77
1.15
1.01192
11
132
215HP
1760
27.9
11.2
30.0
2.3
3.0
80.0
84.0
87.5
0.71
0.75
0.77
1.15
1.01192
11
132
254HP
3530
36.3
14.5
22.0
2.0
2.5
78.5
84.0
87.5
0.73
0.82
0.87
1.15
0.90748
10
22
227
#215HP
3500
34.3
13.7
22.1
2.3
2.4
88.2
89.3
89.4
0.84
0.88
0.90
1.15
0.66546
163
254HP
1760
37.1
14.8
44.0
2.0
2.3
85.5
87.5
88.5
0.70
0.80
0.84
1.15
1.54815
11
24
216
#254HP
3540
49.5
19.8
29.9
2.1
3.0
87.5
88.5
88.5
0.75
0.84
0.86
1.15
1.11673
15
247
256HP
3540
49.5
19.8
29.9
2.1
3.0
87.5
88.5
88.5
0.75
0.84
0.86
1.15
1.11692
15
251
256HP
1760
51.3
20.5
60.1
2.1
2.3
86.5
87.5
88.5
0.68
0.79
0.83
1.15
1.90542
20
247
284 HP or HPH
3540
59.0
23.6
36.8
2.3
3.0
85.5
87.5
88.5
0.84
0.88
0.89
1.15
2.386
13
306
#256HP
3525
58.3
23.3
37.0
2.7
3.0
89.5
90.5
90.5
0.78
0.85
0.88
1.15
1.25653
18
280
284 HP or HPH
1760
60.4
24.2
74.1
2.4
2.2
88.5
89.5
90.2
0.79
0.84
0.86
1.15
3.40563
13
273
#284 HP or HPH
3530
69.3
27.7
43.9
3.0
2.7
80.0
85.6
88.5
0.86
0.88
0.90
1.15
2.8972
13
364
286 HP or HPH
3530
68.6
27.4
43.9
2.8
3.0
85.5
87.5
89.5
0.83
0.88
0.90
1.15
2.8972
10
22
368
286 HP or HPH
1765
70.6
28.2
87.8
2.8
2.5
88.5
89.5
91.0
0.77
0.83
0.86
1.15
3.83133
13
351
324HP
3560
94.0
37.6
59.4
2.9
2.5
85.0
89.5
91.0
0.80
0.85
0.88
1.15
4.04419
10
22
397
#286 HP or HPH
3550
94.8
37.9
59.6
3.0
3.0
88.0
89.5
90.3
0.84
0.87
0.88
1.00
3.40858
15
364
324HP
1770
96.6
38.6
119
2.6
2.5
89.5
91.0
91.7
0.74
0.82
0.85
1.15
6.54471
14
31
467
#324HP
3560
114
45.6
73.2
3.2
3.0
89.0
91.1
92.2
0.80
0.85
0.88
1.15
4.89559
10
22
507
326HP
3560
114
45.6
73.2
3.2
3.0
88.5
91.0
92.4
0.80
0.85
0.88
1.15
4.89559
10
22
507
326HP
1770
118
47.2
147
2.3
2.4
90.2
91.7
91.7
0.76
0.83
0.86
1.15
7.85366
12
26
540
364/5HP
3560
138
55.2
89.1
2.5
2.5
86.5
90.2
91.0
0.82
0.87
0.90
1.15
7.23653
20
807
#326HP
3555
136
54.4
89.2
3.0
2.8
90.3
91.4
92.0
0.86
0.88
0.90
1.15
5.32131
19
42
595
364/5HP
1775
139
55.6
179
2.3
2.6
90.2
91.0
91.7
0.82
0.87
0.89
1.15
12.4559
10
22
728
#326HP
1770
145
58.0
179
2.2
2.4
90.2
91.7
91.7
0.75
0.82
0.85
1.15
9.1626
13
595
364/5HP
3560
168
67.2
109
2.8
3.0
89.5
91.7
92.4
0.81
0.87
0.89
1.15
9.36495
15
847
364/5HP
1775
170
68.0
218
2.2
2.6
89.5
91.7
92.4
0.82
0.86
0.88
1.15
16.6079
15
836
404/5 HP or HPH
3560
225
90.0
148
2.4
2.8
90.2
92.4
93.0
0.83
0.88
0.90
1.15
11.919
15
977
404/5HPorHPH
1780
236
94.4
297
3.0
3.0
89.5
91.7
92.4
0.75
0.82
0.86
1.15
23.2511
11
975
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
# Reduced frames
32
Service Moment
Output
NEMA
Full
Locked
Full
Locked
Break-
Rated
Load
Rotor
Load
Rotor
Down
Efficiency
Power Factor
Service
Moment
Locked
Approx.
Speed
Current
Current
Torque
Torque
Torque
Cos
Factor
of
Rotor
Weight
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Frame
HP
1.0
1.5
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
kW
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37
45
55
75
Allowable
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Lb
143HP
1765
2.90
1.16
2.99
2.8
3.9
75.5
80.0
82.5
0.60
0.73
0.79
1.25
0.09312
16
35
44
143HP
3495
3.98
1.59
2.22
3.0
4.0
75.5
81.5
82.5
0.69
0.78
0.84
1.25
0.04312
18
40
42
145HP
1760
4.00
1.60
4.40
2.6
3.7
80.0
82.5
84.0
0.65
0.76
0.82
1.25
0.11972
12
26
51
145HP
3480
5.20
2.08
3.04
3.5
4.0
80.0
82.5
84.0
0.70
0.81
0.86
1.25
0.04886
13
29
44
145HP
1755
5.28
2.11
6.02
2.4
3.2
81.5
84.0
84.0
0.68
0.79
0.85
1.25
0.13303
12
26
53
182HP
3500
7.18
2.87
4.43
2.5
4.0
80.0
82.5
85.5
0.80
0.87
0.90
1.25
0.15443
23
51
90
#145HP
3450
7.43
2.97
4.49
2.3
2.4
81.0
84.5
85.5
0.70
0.83
0.87
1.15
0.0546
13
51
182HP
1765
7.80
3.12
8.78
2.3
3.2
85.5
87.5
87.5
0.65
0.75
0.81
1.25
0.31782
31
68
88
184HP
3480
11.7
4.67
7.49
2.4
3.5
85.5
86.5
87.5
0.85
0.90
0.91
1.25
0.19988
28
62
105
184HP
1745
13.0
5.18
14.9
2.1
3.0
85.5
87.5
87.5
0.68
0.78
0.82
1.25
0.38136
21
46
93
213HP
3510
17.3
6.93
11.0
2.2
3.0
86.5
88.5
88.5
0.80
0.88
0.90
1.25
0.42144
25
55
121
#184HP
3460
17.5
7.01
11.2
2.2
2.3
85.5
87.5
88.5
0.81
0.87
0.89
1.15
0.23621
15
33
119
213HP
1765
18.8
7.52
22.0
2.0
2.6
87.5
89.5
89.5
0.66
0.77
0.82
1.25
1.01192
21
46
137
215HP
3500
23.1
9.25
15.1
2.0
2.6
88.5
89.5
89.5
0.86
0.90
0.91
1.25
0.66546
19
42
160
215HP
1765
25.5
10.2
29.9
2.0
2.6
88.5
90.2
90.2
0.69
0.79
0.82
1.25
1.3799
19
42
152
254HP
3520
34.0
13.6
22.0
2.0
2.7
89.5
90.2
90.2
0.86
0.89
0.90
1.25
1.25653
33
73
254
#215HP
3500
34.5
13.8
22.1
2.0
2.2
89.0
90.2
90.2
0.80
0.87
0.89
1.15
0.66546
10
22
161
254HP
1765
35.3
14.1
43.9
2.5
2.5
89.5
91.0
91.0
0.74
0.82
0.86
1.25
2.1436
26
57
240
#254HP
3520
46.5
18.6
30.0
1.8
2.2
89.5
90.5
90.2
0.86
0.90
0.90
1.25
1.39615
21
46
278
256HP
3520
46.5
18.6
30.0
2.0
2.5
89.5
90.2
90.2
0.86
0.90
0.90
1.25
1.53576
21
46
287
256HP
1765
47.5
19.0
59.9
2.5
2.5
89.5
91.0
91.0
0.76
0.84
0.87
1.25
2.38178
18
40
273
#256HP
3530
56.8
22.7
36.9
2.0
2.2
90.2
91.0
91.0
0.83
0.88
0.90
1.15
1.53576
18
40
287
284 HP or HPH
3520
56.8
22.7
37.0
2.2
2.8
90.2
91.0
91.0
0.86
0.90
0.90
1.25
2.89729
23
51
313
284 HP or HPH
1765
59.3
23.7
73.9
2.3
2.2
91.0
92.4
92.4
0.77
0.84
0.85
1.25
3.83133
51
112
351
# 284 HP or HPH
3530
67.5
27.0
43.9
2.4
3.0
90.2
91.0
91.0
0.85
0.90
0.90
1.25
3.57901
64
141
379
286 HP or HPH
3530
67.5
27.0
43.9
2.4
3.0
90.2
91.0
91.0
0.87
0.90
0.90
1.25
3.57901
60
132
388
286 HP or HPH
1770
70.3
28.1
87.6
2.5
2.3
91.0
92.4
92.4
0.76
0.83
0.85
1.25
4.68274
47
103
397
324HP
3550
90.3
36.1
59.6
2.2
2.2
90.2
91.7
91.7
0.87
0.90
0.91
1.25
4.89559
46
101
516
# 286 HP or HPH
3540
93.3
37.3
59.7
2.4
2.8
91.0
91.7
91.7
0.80
0.86
0.88
1.25
3.74934
22
48
408
324HP
1770
95.3
38.1
119
2.3
2.3
91.7
93.0
93.0
0.76
0.83
0.85
1.25
7.85366
28
62
542
#324HP
3550
111
44.2
73.5
2.1
2.1
91.0
92.4
92.4
0.88
0.90
0.91
1.25
5.32131
33
73
520
326HP
3550
111
44.2
73.5
2.1
2.1
91.0
92.4
92.4
0.88
0.90
0.91
1.25
5.32131
33
73
549
326HP
1770
116
46.2
147
2.3
2.3
92.4
93.6
93.6
0.77
0.83
0.86
1.25
9.1626
25
55
595
364/5HP
3560
134
53.4
89.1
2.0
2.5
91.0
92.4
93.0
0.80
0.87
0.91
1.25
8.51359
61
134
807
#326HP
3540
138
55.2
89.6
2.2
2.0
91.0
92.4
93.0
0.83
0.87
0.88
1.15
5.32131
30
66
549
#326HP
1770
142
56.8
179
2.1
2.3
91.7
93.6
93.6
0.75
0.83
0.85
1.25
9.16239
20
44
595
364/5HP
1770
136
54.2
179
2.1
2.2
92.4
93.6
93.6
0.83
0.87
0.89
1.25
17.4383
23
51
853
364/5HP
3560
163
65.3
109
2.0
2.1
91.0
93.0
93.0
0.80
0.88
0.91
1.25
9.79062
46
101
915
364/5HP
1775
165
65.9
218
2.3
2.4
93.0
94.1
94.1
0.83
0.87
0.89
1.25
19.9295
22
48
900
404/5 HP or HPH
3560
221
88.4
148
2.0
2.6
91.7
93.6
93.6
0.81
0.89
0.91
1.25
11.919
38
84
1206
404/5 HP or HPH
1775
229
91.6
298
2.1
2.2
93.6
94.5
94.5
0.80
0.86
0.87
1.25
27.4031
18
40
1118
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
# Reduced frames
33
ELECTRICAL DATA
Rated
ELECTRICAL DATA
Standard Efficiency
34
35
ELECTRICAL DATA
Brake Motors
Standard Efficiency
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
1.5
ELECTRICAL DATA
2.0
3.0
5.0
7.5
10
15
20
25
kW
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143T
145T
1720
1140
3.32
3.72
1.33
1.49
J
J
3.07
4.64
2.8
2.8
3.0
2.9
68.0
67.4
74.0
72.8
75.5
76.7
0.53
0.49
0.65
0.60
0.75
0.66
1.15
1.15
0.0798
0.11972
6
8
13
18
33
44
182T
143T
870
3435
4.48
4.09
1.79
1.64
L
H
6.08
2.26
2.2
2.1
2.7
2.6
63.2
74.0
69.4
77.0
72.5
78.5
0.42
0.78
0.52
0.84
0.58
0.86
1.15
1.15
0.39926
0.03735
9
9
20
20
77
37
145T
182T
1710
1155
4.69
5.15
1.88
2.06
J
H
4.53
6.71
2.5
2.2
2.9
2.6
72.0
70.7
77.0
77.0
80.0
80.1
0.53
0.48
0.63
0.57
0.75
0.67
1.15
1.15
0.0798 5
0.37709 13
11
29
37
60
184T
145T
865
3430
5.98
5.41
2.39
2.16
K
H
8.96
3.08
2.1
2.2
2.6
2.4
63.5
75.5
70.3
78.5
74.5
80.0
0.44
0.76
0.55
0.83
0.62
0.87
1.15
1.15
0.39926 11
0.03735 7
24
15
79
41
145T
184T
1720
1160
6.32
7.50
2.53
3.00
J
H
6.15
9.11
3.0
2.2
3.0
2.5
74.0
71.7
78.5
78.9
81.5
81.0
0.58
0.45
0.69
0.54
0.75
0.62
1.15
1.15
0.11972 5
0.44363 13
11
29
44
82
213T
182T
865
3510
7.56
8.26
3.02
3.30
L
K
12.2
4.42
2.6
2.3
3.0
3.0
68.3
74.0
72.4
78.5
75.5
81.5
0.48
0.70
0.59
0.78
0.66
0.82
1.15
1.15
1.19089
0.14537
9
6
20
13
119
79
182T
213T
1750
1160
8.16
9.93
3.26
3.97
K
J
8.86
13.4
2.6
2.2
2.9
2.8
75.5
77.6
78.5
81.5
81.5
81.8
0.65
0.53
0.74
0.62
0.83
0.68
1.15
1.15
0.28602 5
0.73594 14
11
31
64
106
215T
184T
870
3460
11.9
12.8
4.76
5.12
L
H
17.8
7.54
2.4
2.2
3.0
2.7
72.4
78.0
76.5
83.5
77.5
83.5
0.40
0.76
0.50
0.81
0.60
0.87
1.15
1.15
1.42907 10
0.17261 9
22
20
137
84
184T
215T
1740
1155
13.9
15.1
5.56
6.04
K
J
15.0
22.6
2.5
2.3
2.6
2.9
78.5
78.0
81.5
81.9
84.0
82.9
0.67
0.62
0.76
0.73
0.81
0.74
1.15
1.15
0.38136
0.82794
5
9
11
20
93
115
254T
213T
880
3500
20.0
18.5
8.00
7.40
L
H
29.6
11.1
2.0
2.0
2.8
2.8
78.2
80.0
80.4
82.5
81.5
84.0
0.42
0.79
0.50
0.86
0.57
0.89
1.15
1.15
3.06772 10
0.39926 11
22
24
251
117
213T
254T
1760
1170
19.2
19.5
7.68
7.80
L
H
22.0
33.1
2.2
2.3
3.4
3.1
82.5
86.5
85.5
87.5
86.5
87.5
0.66
0.62
0.77
0.74
0.83
0.81
1.15
1.15
0.82794 4
2.386 22
9
48
117
223
256T
215T
875
3510
22.5
24.5
9.00
9.80
G
H
44.3
15.1
1.9
2.2
2.7
2.8
83.4
84.0
85.9
85.5
86.3
85.5
0.51
0.79
0.63
0.86
0.71
0.90
1.15
1.15
3.40858 27
0.48798 6
59
13
280
132
215T
256T
1760
1170
27.9
25.8
11.2
10.3
J
H
30.0
45.2
2.3
2.3
3.0
2.9
80.0
86.0
84.0
87.8
87.5
87.9
0.71
0.67
0.75
0.78
0.77
0.83
1.15
1.15
1.01192 5
2.89729 18
11
40
132
254
284T
254T
885
3530
26.5
36.3
10.6
14.5
K
J
59.7
22.0
2.5
2.0
2.8
2.5
83.5
78.5
84.5
84.0
85.5
87.5
0.67
0.73
0.78
0.82
0.83
0.87
1.15
1.15
5.89024 14
0.90748 10
31
22
348
227
254T
284T
1760
1170
37.1
35.5
14.8
14.2
G
K
44.0
66.3
2.0
2.2
2.3
2.8
85.5
85.2
87.5
87.2
88.5
88.3
0.70
0.82
0.80
0.85
0.84
0.88
1.15
1.15
1.54815 11
6.54471 7
24
15
216
287
286T
256T
880
3540
41.7
49.5
16.7
19.8
J
J
88.1
29.9
2.0
2.1
2.5
3.0
85.0
87.5
86.2
88.5
87.1
88.5
0.62
0.75
0.72
0.84
0.76
0.86
1.15
1.15
7.19918 10
1.11692 7
22
15
426
251
256T
286T
1760
1165
51.3
48.1
20.5
19.2
G
J
60.1
90.7
2.1
2.4
2.3
2.8
86.5
85.4
87.5
87.9
88.5
89.0
0.68
0.80
0.79
0.87
0.83
0.88
1.15
1.15
1.90542
7.19918
9
8
20
18
247
397
324T
284T
885
3540
60.8
59.0
24.3
23.6
G
H
119
36.8
2.2
2.3
2.4
3.0
85.4
85.5
87.5
87.5
88.5
88.5
0.52
0.84
0.64
0.88
0.70
0.89
1.15
1.15
8.93926 26
2.386
6
57
13
494
306
284T
324T
1760
1175
60.4
61.8
24.2
24.7
J
G
74.1
111
2.4
2.1
2.2
2.3
88.5
87.0
89.5
89.0
90.2
89.5
0.79
0.74
0.84
0.82
0.86
0.84
1.15
1.15
3.40563 6
8.93926 20
13
44
273
494
326T
286T
880
3530
72.5
68.6
29.0
27.4
H
H
148
43.9
2.2
2.8
2.2
3.0
86.2
85.5
88.0
87.5
89.0
89.5
0.66
0.83
0.70
0.88
0.72
0.90
1.15
1.15
9.79062 12
2.8972 10
26
22
518
368
286T
326T
1765
1175
70.6
71.2
28.2
28.5
J
G
87.8
132
2.8
2.1
2.5
2.3
88.5
88.7
89.5
90.0
91.0
90.2
0.77
0.77
0.83
0.84
0.86
0.86
1.15
1.15
3.83133 6
9.79062 20
13
44
351
512
30
22
40
30
324T
324T
3560
1770
94.0
96.6
37.6
38.6
J
H
59.4
119
2.9
2.6
2.5
2.5
85.0
89.5
89.5
91.0
91.0
91.7
0.80
0.74
0.85
0.82
0.88
0.85
1.15
1.15
4.04419 10
6.54471 14
22
31
397
467
50
37
326T
326T
3560
1770
114
118
45.6
47.2
J
G
73.2
147
3.2
2.3
3.0
2.4
88.5
90.2
91.0
91.7
92.4
91.7
0.80
0.76
0.85
0.83
0.88
0.86
1.15
1.15
4.89559 10
7.85366 12
22
26
507
540
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
IMPORTANT: WEG can supply frames 284/6T and 324/6T only on request, after receiving load information: - braking torque;
- number of stops (brakings) per hour.
36
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
1.5
2.0
3.0
5.0
7.5
10
15
20
25
kW
0.75
1.1
1.5
2.2
3.7
5.5
7.5
11
15
18.5
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
SF
50
75
100
50
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143T
1765
2.90
1.16
2.99
2.8
3.9
75.5
80.0
82.5
0.60
0.73
0.79
1.25
0.09312
16
35
44
145T
182T
1165
875
3.40
4.63
1.36
1.85
L
M
4.54
6.04
2.3
3.0
3.0
3.5
75.5
68.0
80.0
72.0
80.0
74.0
0.48
0.35
0.60
0.45
0.69
0.55
1.25
1.25
0.13303
0.39926
22
40
48
88
44
95
143T
145T
3495
1760
3.98
4.00
1.59
1.60
L
L
2.22
4.40
3.0
2.6
4.0
3.7
75.5
80.0
81.5
82.5
82.5
84.0
0.69
0.65
0.78
0.76
0.84
0.82
1.25
1.25
0.04312
0.11972
18
12
40
26
42
51
182T
184T
1165
860
4.75
5.43
1.90
2.17
M
J
6.65
9.01
3.2
2.5
4.0
2.6
81.5
74.0
84.0
75.5
85.5
77.0
0.47
0.47
0.58
0.58
0.68
0.66
1.25
1.25
0.48798
0.44363
36
32
79
70
68
110
145T
145T
3480
1755
5.20
5.28
2.08
2.11
L
K
3.04
6.02
3.5
2.4
4.0
3.2
80.0
81.5
82.5
84.0
84.0
84.0
0.70
0.68
0.81
0.79
0.86
0.85
1.25
1.25
0.04886
0.13303
13
12
29
26
44
53
184T
213T
1165
870
6.40
6.93
2.56
2.77
L
L
9.07
12.2
3.0
2.4
3.0
2.9
84.0
78.5
86.5
81.5
86.5
82.5
0.48
0.47
0.60
0.53
0.68
0.66
1.25
1.25
0.62109
1.19089
35
43
77
95
79
141
182T
182T
3500
1765
7.18
7.80
2.87
3.12
K
K
4.43
8.78
2.5
2.3
4.0
3.2
80.0
85.5
82.5
87.5
85.5
87.5
0.80
0.65
0.87
0.75
0.90
0.81
1.25
1.25
0.15443
0.31782
23
31
51
68
90
88
213T
215T
1170
860
8.30
8.55
3.32
3.42
J
K
13.3
18.0
2.2
2.0
2.5
2.1
86.5
82.5
87.5
84.0
87.5
84.0
0.60
0.60
0.70
0.71
0.76
0.77
1.25
1.25
1.01192
1.78632
59 130
30 66
110
153
184T
184T
3480
1745
11.7
13.0
4.67
5.18
H
H
7.49
14.9
2.4
2.1
3.5
3.0
85.5
85.5
86.5
87.5
87.5
87.5
0.85
0.68
0.90
0.78
0.91
0.82
1.25
1.25
0.19988
0.38136
28
21
62
46
105
93
215T
254T
1160
875
13.6
16.7
5.44
6.67
H
H
22.5
29.8
1.9
2.0
2.1
2.8
86.5
72.1
87.5
85.0
87.5
85.7
0.65
0.44
0.75
0.56
0.78
0.65
1.25
1.25
1.47188
2.89729
49 108
38 84
162
232
213T
213T
3510
1765
17.3
18.8
6.93
7.52
G
H
11.0
22.0
2.2
2.0
3.0
2.6
86.5
87.5
88.5
89.5
88.5
89.5
0.80
0.66
0.88
0.77
0.90
0.82
1.25
1.25
0.42144
1.01192
25
21
55
46
121
137
254T
256T
1170
875
19.1
22.5
7.62
9.01
H
G
33.1
44.3
2.3
1.9
3.1
2.7
88.5
83.4
89.5
85.9
89.5
86.3
0.62
0.51
0.74
0.63
0.81
0.71
1.25
1.25
2.386
3.40858
29
41
64
90
236
276
215T
215T
3500
1765
23.1
25.5
9.25
10.2
G
H
15.1
29.9
2.0
2.0
2.6
2.6
88.5
88.5
89.5
90.2
89.5
90.2
0.86
0.69
0.90
0.79
0.91
0.82
1.25
1.25
0.66546
1.3799
19
19
42
42
160
152
256T
284T
1175
880
25.3
27.3
10.1
10.9
H
H
45.0
60.1
2.3
2.5
2.9
2.4
88.5
86.5
89.5
88.5
89.5
88.5
0.67
0.60
0.78
0.72
0.83
0.78
1.25
1.25
2.89729
7.19918
24 53
53 117
278
373
254T
254T
3520
1765
34.0
35.3
13.6
14.1
F
G
22.0
43.9
2.0
2.5
2.7
2.5
89.5
89.5
90.2
91.0
90.2
91.0
0.86
0.74
0.89
0.82
0.90
0.86
1.25
1.25
1.25653
2.1436
33
26
73
57
254
240
284T
1180
34.5
13.8
65.7
2.3
2.5
89.5
90.2
91.0
0.79
0.85
0.88
1.25
7.19918
21
46
306
286T
256T
880
3520
38.0
46.5
15.2
18.6
G
G
88.1
30.0
2.4
2.0
2.3
2.5
86.5
89.5
88.5
90.2
88.5
90.2
0.68
0.86
0.78
0.90
0.82
0.90
1.25
1.25
8.18089
1.53576
37
21
81
46
423
287
256T
286T
1765
1175
47.5
47.0
19.0
18.8
G
G
59.9
90.0
2.5
2.3
2.5
2.5
89.5
90.2
91.0
91.0
91.0
91.0
0.76
0.80
0.84
0.86
0.87
0.88
1.25
1.25
2.38178
8.18089
18
31
40
68
273
430
324T
284T
880
3520
55.3
56.8
22.1
22.7
G
G
120
37.0
2.3
2.2
2.3
2.8
87.5
90.2
89.5
91.0
89.5
91.0
0.58
0.86
0.69
0.90
0.76
0.90
1.25
1.25
9.36495
2.89729
47 103
23 51
512
313
284T
324T
1765
1175
59.3
59.5
23.7
23.8
F
F
73.9
111
2.3
2.2
2.2
2.4
91.0
89.5
92.4
91.7
92.4
91.7
0.77
0.72
0.84
0.81
0.85
0.85
1.25
1.25
3.83133
10.2163
51 112
56 123
351
527
326T
286T
880
3530
71.0
67.5
28.4
27.0
G
G
148
43.9
2.6
2.4
2.9
3.0
87.5
90.2
88.5
91.0
89.5
91.0
0.53
0.87
0.65
0.90
0.73
0.90
1.25
1.25
11.919
3.57901
52 114
60 132
587
388
286T
326T
1770
1175
70.3
70.8
28.1
28.3
F
G
87.6
132
2.5
2.3
2.3
2.5
91.0
90.2
92.4
91.7
92.4
91.7
0.76
0.70
0.83
0.80
0.85
0.85
1.25
1.25
4.68274
11.919
47 103
35 77
397
580
30
22
40
30
324T
324T
3550
1770
90.3
95.3
36.1
38.1
G
G
59.6
119
2.2
2.3
2.2
2.3
90.2
91.7
91.7
93.0
91.7
93.0
0.87
0.76
0.90
0.83
0.91
0.85
1.25
1.25
4.89559
7.85366
46 101
28 62
516
542
50
37
326T
326T
3550
1770
111
116
44.2
46.2
G
G
73.5
147
2.1
2.3
2.1
2.3
91.0
92.4
92.4
93.6
92.4
93.6
0.88
0.77
0.90
0.83
0.91
0.86
1.25
1.25
5.32131
9.16239
33
25
549
595
73
55
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
IMPORTANT: WEG can supply frames 284/6T and 324/6T only on request, after receiving load information: - braking torque;
- number of stops (brakings) per hour.
37
ELECTRICAL DATA
Rated
Output
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
HP
1.0
ELECTRICAL DATA
1.5
2.0
3.0
kW
0.75
1.1
1.5
2.2
5.0
3.7
7.5
5.5
10
15
20
25
30
40
50
60
38
7.5
11
15
18.5
22
30
37
45
Locked BreakRotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
143T
3495
2.85
1.14
1.0916
3.0
4.0
74.0
78.5
78.5
0.69
0.79
0.84
1.00
0.8591
23 51
88
143T
145T
1765
1765
2.90
2.90
1.16
1.16
L
L
2.1684
2.1684
2.8
2.8
3.9
3.9
75.5
75.0
80.0
80.0
82.5
82.5
0.60
0.60
0.73
0.73
0.79
0.79
1.00
1.00
2.1418
2.1395
16 35
16 35
97
108
145T
182T
1165
875
3.40
4.63
1.36
1.85
L
M
3.2821
4.3664
2.3
3.0
3.0
3.5
75.5
68.0
80.0
72.0
80.0
74.0
0.48
0.35
0.60
0.45
0.69
0.55
1.00
1.00
3.0597
9.1830
22 48
40 88
97
209
143T
145T
3495
3495
3.98
3.98
1.59
1.59
L
L
1.6374
1.6374
3.0
3.0
4.0
4.0
75.5
75.5
81.5
81.5
82.5
82.5
0.69
0.69
0.78
0.78
0.84
0.84
1.00
1.00
0.9918
0.9918
18 40
18 40
92
101
145T
182T
1760
1165
4.00
4.75
1.60
1.90
L
M
3.2600
4.9195
2.6
3.2
3.7
4.0
80.0
81.5
82.5
84.0
84.0
85.5
0.65
0.47
0.76
0.58
0.82
0.68
1.00
1.00
2.7536
11.2235
12 26
36 79
112
150
184T
145T
860
3480
5.43
5.20
2.17
2.08
J
L
6.6676
2.1979
2.5
3.5
2.6
4.0
74.0
80.0
75.5
82.5
77.0
84.0
0.47
0.70
0.58
0.81
0.66
0.86
1.00
1.00
10.2035
1.1238
32 70
13 29
242
97
145T
184T
1755
1165
5.28
6.40
2.11
2.56
K
L
4.3516
6.5569
2.4
3.0
3.2
3.0
81.5
84.0
84.0
86.5
84.0
86.5
0.68
0.48
0.79
0.60
0.85
0.68
1.00
1.00
3.0597
14.2851
12 26
35 77
117
174
213T
182T
870
3500
6.93
7.18
2.77
2.87
L
K
8.7770
3.2748
2.4
2.5
2.9
4.0
78.5
80.0
81.5
82.5
82.5
85.5
0.47
0.80
0.53
0.87
0.66
0.90
1.00
1.00
27.3905
3.5519
43 95
23 51
310
198
145T
182T
3450
1765
7.43
7.80
2.97
3.12
K
K
3.3264
6.4979
2.3
2.3
2.4
3.2
81.0
85.5
84.5
87.5
85.5
87.5
0.70
0.65
0.83
0.75
0.87
0.81
1.00
1.00
1.2558
7.3099
6 13
31 68
112
194
213T
215T
1170
860
8.30
8.55
3.32
3.42
J
K
9.8096
13.3499
2.2
2.0
2.5
2.1
86.5
82.5
87.5
84.0
87.5
84.0
0.60
0.60
0.70
0.71
0.76
0.77
1.00
1.00
23.2742
41.0854
59 130
30 66
242
337
184T
184T
3480
1745
11.7
13.0
4.67
5.18
H
H
5.4875
10.9159
2.4
2.1
3.5
3.0
85.5
85.5
86.5
87.5
87.5
87.5
0.85
0.68
0.90
0.78
0.91
0.82
1.00
1.00
4.5972
8.7713
28 62
21 46
231
205
215T
254T
1160
875
13.6
16.7
5.44
6.67
H
H
16.4476
21.8318
1.9
2.0
2.1
2.8
86.5
72.1
87.5
85.0
87.5
85.7
0.65
0.44
0.75
0.56
0.78
0.65
1.00
1.00
33.8532
66.6377
49 108
38 84
356
510
213T
184T
3510
3460
17.3
17.5
6.93
7.01
G
H
8.1869
8.2607
2.2
2.2
3.0
2.3
86.5
85.5
88.5
87.5
88.5
88.5
0.80
0.81
0.88
0.87
0.90
0.89
1.00
1.00
9.6931
5.4328
25 55
15 33
266
262
213T
254T
1765
1170
18.8
19.1
7.52
7.62
H
H
16.2263
24.4870
2.0
2.3
2.6
3.1
87.5
88.5
89.5
89.5
89.5
89.5
0.66
0.62
0.77
0.74
0.82
0.81
1.00
1.00
23.2742
54.8780
21 46
29 64
301
519
256T
215T
875
3500
22.5
23.1
9.01
9.25
G
G
32.7477
10.9159
1.9
2.0
2.7
2.6
83.4
88.5
85.9
89.5
86.3
89.5
0.51
0.86
0.63
0.90
0.71
0.91
1.00
1.00
78.3973
15.3056
41 90
19 42
607
352
215T
256T
1765
1175
25.5
25.3
10.2
10.1
H
H
21.6843
32.5264
2.0
2.3
2.6
2.9
88.5
88.5
90.2
89.5
90.2
89.5
0.69
0.67
0.79
0.78
0.82
0.83
1.00
1.00
31.7377
66.6377
19 42
24 53
334
612
284T
254T
880
3520
27.3
34.0
10.9
13.6
H
F
43.4423
16.3001
2.5
2.0
2.4
2.7
86.5
89.5
88.5
90.2
88.5
90.2
0.60
0.86
0.72
0.89
0.78
0.90
1.00
1.00
165.5811 53 117
28.9002 33 73
821
559
215T
254T
3500
1765
34.5
35.3
13.8
14.1
F
G
16.3739
32.4527
2.0
2.5
2.2
2.5
89.0
89.5
90.2
91.0
90.2
91.0
0.80
0.74
0.87
0.82
0.89
0.86
1.00
1.00
15.3056
49.3028
14 31
26 57
354
528
284T
286T
1180
880
34.5
38.0
13.8
15.2
G
G
48.6053
65.1266
2.3
2.4
2.5
2.3
89.5
86.5
90.2
88.5
91.0
88.5
0.79
0.68
0.85
0.78
0.88
0.82
1.00
1.00
165.5811 21 46
188.1605 37 81
673
931
254T
256T
3520
3520
46.5
46.5
18.6
18.6
G
G
21.6843
21.6843
1.8
2.0
2.2
2.5
89.5
89.5
90.5
90.2
90.2
90.2
0.86
0.86
0.90
0.90
0.90
0.90
1.00
1.00
32.1115
35.3225
21 46
21 46
612
631
256T
286T
1765
1175
47.5
47.0
19.0
18.8
G
G
43.2948
65.0529
2.5
2.3
2.5
2.5
89.5
90.2
91.0
91.0
91.0
91.0
0.76
0.80
0.84
0.86
0.87
0.88
1.00
1.00
54.7809 18 40
188.1605 31 68
601
946
324T
326T
880
880
55.3
55.3
22.1
22.1
G
G
87.0322
87.0322
2.3
2.3
2.3
2.3
87.5
87.5
89.5
89.5
89.5
89.5
0.58
0.58
0.69
0.69
0.76
0.76
1.00
1.00
215.3939 47 103
215.3939 47 103
1126
1168
284TS
256T
3540
3530
56.8
56.8
22.7
22.7
G
G
26.9947
27.0685
2.4
2.0
2.3
2.2
90.2
90.2
91.0
91.0
91.0
91.0
0.85
0.83
0.89
0.88
0.90
0.90
1.00
1.00
66.6377
35.3225
61 134
18 40
689
631
284T
324T
1765
1175
59.3
59.5
23.7
23.8
F
F
54.1370
81.1317
2.3
2.2
2.2
2.4
91.0
89.5
92.4
91.7
92.4
91.7
0.77
0.72
0.84
0.81
0.85
0.85
1.00
1.00
88.1206 51 112
234.9749 56 123
772
1159
326T
284TS
880
3550
71.0
67.5
28.4
27.0
G
F
108.4215
32.3052
2.6
2.5
2.9
2.5
87.5
89.5
88.5
91.0
89.5
91.0
0.53
0.86
0.65
0.90
0.73
0.90
1.00
1.00
274.1370 52 114
82.3172 64 141
1291
834
286TS
286T
3550
1770
67.5
70.3
27.0
28.1
F
F
32.3052
64.7579
2.5
2.5
2.5
2.3
89.5
91.0
91.0
92.4
91.0
92.4
0.86
0.76
0.90
0.83
0.90
0.85
1.00
1.00
82.3172 64 141
107.7030 47 103
854
873
326T
364/5T
1175
885
70.8
76.8
28.3
30.7
G
G
97.3581
129.8107
2.3
2.2
2.5
2.2
90.2
89.5
91.7
91.0
91.7
91.0
0.70
0.66
0.80
0.75
0.85
0.79
1.00
1.00
274.1370 35 77
539.4742 48 106
1276
1940
324TS
324T
3550
1770
90.3
95.3
36.1
38.1
G
G
43.0736
86.2946
2.2
2.3
2.2
2.3
90.2
91.7
91.7
93.0
91.7
93.0
0.87
0.76
0.90
0.83
0.91
0.85
1.00
1.00
112.5986 46 101
180.6342 28 62
1135
1192
364/5T
364/5T
1175
885
94.3
105
37.7
41.9
G
G
129.8107
172.5893
2.3
2.2
2.3
2.2
92.4
89.5
93.0
91.0
93.0
91.0
0.76
0.66
0.83
0.75
0.86
0.79
1.00
1.00
539.4742 35 77
667.9223 42 92
1940
2097
324TS
326TS
3550
3550
111
111
44.2
44.2
G
G
53.8420
53.8420
2.1
2.1
2.1
2.1
91.0
91.0
92.4
92.4
92.4
92.4
0.88
0.88
0.90
0.90
0.91
0.91
1.00
1.00
122.3901 33 73
122.3901 33 73
1144
1208
326T
364/5T
1770
1180
116
116
46.2
46.5
G
G
107.6839
162.2634
2.3
2.5
2.3
2.7
92.4
92.4
93.6
93.0
93.6
93.0
0.77
0.74
0.83
0.82
0.86
0.86
1.00
1.00
210.7398 25 55
667.9223 39 86
1309
1940
404/5T
364/5TS
885
3560
130
134
51.9
53.4
G
G
216.1054
64.3891
2.2
2.0
2.1
2.5
90.2
91.0
91.7
92.4
91.7
93.0
0.69
0.80
0.75
0.87
0.78
0.91
1.00
1.00
744.9884 29 64
195.8126 61 134
2508
1775
326TS
364/5T
3540
1770
138
136
55.2
54.2
G
F
64.7579
129.8107
2.2
2.1
2.0
2.2
91.0
92.4
92.4
93.6
93.0
93.6
0.83
0.83
0.87
0.87
0.88
0.89
1.00
1.00
122.3901 30 66
401.0809 23 51
1208
1877
404/5T
404/5T
1180
885
140
154
56.1
61.6
G
G
193.9785
258.8839
2.5
1.7
2.7
2.1
93.0
91.0
93.6
91.7
93.6
91.7
0.74
0.70
0.83
0.76
0.86
0.80
1.00
1.00
796.3681 32 70
847.7478 13 29
2347
2878
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
75
100
125
150
200
250
300
350
kW
55
75
90
110
150
185
220
260
Rotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
kVA
Tn
At 230V At 575V
Code
Lb.Ft
Tl/Tn
Tb/Tn
% of full load
50
75
100
50
SF
75
100
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
Weight
Lb
364/5TS
3560
163
65.3
80.3941
2.0
2.1
91.0
93.0
93.0
0.80
0.88
0.91
1.00
225.1843 46 101
2013
364/5T
404/5T
1775
1180
165
174
65.9
69.4
G
G
161.5259
242.6576
2.3
2.5
2.4
2.6
93.0
93.0
94.1
93.6
94.1
93.6
0.83
0.72
0.87
0.81
0.89
0.85
1.00
1.00
458.3785 22 48
847.7478 26 57
1980
2499
444/5T
404/5TS
890
3560
179
221
71.5
88.4
G
F
322.3142
107.6839
1.7
2.0
2.1
2.6
91.7
91.7
92.4
93.6
93.0
93.6
0.73
0.81
0.80
0.89
0.83
0.91
1.00
1.00
1693.3865 41 90
274.1370 38 84
3265
2653
404/5T
444/5T
1775
1185
229
241
91.6
96.4
G
G
215.3678
322.3142
2.1
2.3
2.2
2.6
93.6
93.0
94.5
94.1
94.5
94.1
0.80
0.67
0.86
0.77
0.87
0.83
1.00
1.00
630.2713 18 40
1693.3865 49 108
2460
3397
444/5T
444/5TS
890
3560
244
263
97.6
105
G
F
429.2605
134.2361
1.7
2.0
2.0
2.5
92.4
92.4
93.0
94.1
93.0
94.5
0.73
0.84
0.80
0.90
0.83
0.91
1.00
1.00
2006.9754 29 64
642.2313 72 158
3793
3575
444/5T
444/5T
1780
1185
275
283
110
113
G
G
268.4722
403.4459
2.0
2.1
2.2
2.3
93.6
93.6
94.5
94.1
94.5
94.1
0.81
0.74
0.85
0.80
0.87
0.85
1.00
1.00
1051.7946 37 81
2006.9754 40 88
3236
4123
447T
504/5T
890
890
290
290
116
116
G
G
536.9444
536.9444
1.7
1.7
2.0
2.0
93.0
93.0
93.6
93.6
93.6
93.6
0.73
0.73
0.80
0.80
0.83
0.83
1.00
1.00
2383.2830 30 66
2383.2830 30 66
4497
4497
444/5TS
444/5T
3570
1780
320
335
128
134
F
G
160.7883
322.3142
2.0
2.2
2.5
2.3
92.4
94.1
94.1
95.0
94.5
95.0
0.84
0.81
0.90
0.86
0.91
0.87
1.00
1.00
770.6794 75 165
1314.7444 33 73
3716
3663
447T
504/5T
1185
1185
343
343
137
137
G
G
483.8400
483.8400
2.2
2.2
2.2
2.2
94.5
94.5
95.0
95.0
95.0
95.0
0.74
0.74
0.82
0.82
0.85
0.85
1.00
1.00
2383.2830 40 88
2383.2830 40 88
4332
4332
447T
504/5T
890
890
355
355
142
142
G
G
643.8908
643.8908
1.7
1.7
2.0
2.0
93.0
93.0
93.6
93.6
93.6
93.6
0.72
0.72
0.80
0.80
0.83
0.83
1.00
1.00
2885.0280 18 40
2885.0280 18 40
5001
5001
447TS
504/5TS
3570
3570
435
435
174
174
G
G
213.8927
213.8927
2.2
2.2
2.6
2.6
93.6
93.6
94.5
94.5
95.0
95.0
0.85
0.85
0.90
0.90
0.91
0.91
1.00
1.00
1027.5710 74 163
1027.5710 74 163
4123
4123
447T
504/5T
1780
1780
460
460
184
184
G
G
429.2605
429.2605
2.3
2.3
2.4
2.4
94.1
94.1
95.0
95.0
95.0
95.0
0.80
0.80
0.84
0.84
0.86
0.86
1.00
1.00
1621.5184 23 51
1621.5184 23 51
4391
4391
447T
504/5T
1185
1185
473
473
189
189
G
G
644.6283
644.6283
2.4
2.4
2.4
2.4
94.5
94.5
95.0
95.0
95.0
95.0
0.73
0.73
0.80
0.80
0.84
0.84
1.00
1.00
2885.0280 32 70
2885.0280 32 70
4992
4992
586/7T
447TS
890
3570
525
535
210
214
G
G
858.5210
267.7346
1.0
2.0
2.1
2.5
93.6
93.6
94.1
95.4
94.5
95.4
0.60
0.88
0.71
0.90
0.76
0.91
1.00
1.00
8055.0439 65 143
1181.7078 34 75
8393
4550
504/5TS
447T
3570
1780
535
565
214
226
G
G
267.7346
536.9444
2.0
2.1
2.5
2.3
93.6
94.5
95.4
95.0
95.4
95.4
0.88
0.81
0.90
0.85
0.91
0.86
1.00
1.00
1181.7078 34 75
2059.7650 22 48
4550
5093
504/5T
5008T
1780
1190
565
560
226
224
G
G
536.9444
802.4664
2.1
1.7
2.3
2.4
94.5
94.7
95.0
95.3
95.4
95.1
0.81
0.73
0.85
0.82
0.86
0.86
1.00
1.00
2059.7650 22 48
4382.8133 15 33
5093
6549
586/7T
586/7T
1190
890
610
635
244
254
G
G
802.4664
1073.1513
1.8
1.0
2.1
2.1
93.0
93.6
94.1
94.1
95.0
95.0
0.68
0.60
0.76
0.71
0.80
0.77
1.00
1.00
5202.0825 74 163
8911.9641 26 57
7931
9339
586/7TS
586/7T
3570
1790
650
673
260
269
G
G
320.8390
640.2029
1.1
1.8
2.0
2.1
94.1
94.5
95.0
95.0
95.4
95.4
0.87
0.81
0.88
0.85
0.89
0.86
1.00
1.00
2822.3093 34 75
4069.7557 56 123
6549
7568
5008T
5008T
1785
1190
685
660
274
264
G
G
642.4156
963.2547
2.0
1.6
3.0
2.1
93.5
95.3
94.7
95.5
95.0
95.1
0.73
0.78
0.81
0.84
0.85
0.87
1.00
1.00
2251.4171 25 55
5113.2841 15 33
5889
7355
586/7T
586/7T
1190
890
728
755
291
302
G
G
963.2547
1287.7815
1.8
1.0
2.1
2.0
93.0
93.6
94.1
94.1
95.0
95.0
0.69
0.60
0.76
0.62
0.80
0.77
1.00
1.00
6372.5502 75 165
10625.8022 24 53
8998
9847
586/7TS
586/7T
3570
1790
768
795
307
318
G
G
374.6810
747.1493
1.0
1.8
2.0
2.1
94.1
94.5
95.0
95.0
95.4
95.4
0.87
0.81
0.88
0.85
0.89
0.86
1.00
1.00
3135.9005 35 77
4273.2436 38 84
7058
8587
5008T
5008T
1785
1190
783
780
313
312
F
G
749.3620
1124.0430
2.0
1.6
2.8
2.0
94.3
95.7
95.2
95.7
95.3
95.1
0.77
0.80
0.84
0.86
0.87
0.87
1.00
1.00
2573.0445 21 46
5843.7733 15 33
6446
8188
586/7T
586/7T
1190
890
855
880
342
352
G
G
1124.0430
1502.4118
1.8
1.1
2.0
2.0
93.0
93.6
94.1
94.1
95.4
95.0
0.70
0.60
0.77
0.64
0.80
0.78
1.00
1.00
7543.0179 73 161
11139.9557 25 55
9508
10188
586/7T
5008T
1790
1785
918
885
367
354
G
F
854.0956
856.3083
1.8
2.0
2.0
2.7
94.5
94.7
95.0
95.4
95.4
95.4
0.81
0.79
0.85
0.85
0.86
0.88
1.00
1.00
4578.4743 34 75
2894.6788 22 48
9436
7053
586/7T
586/7T
1190
1790
988
1010
395
404
G
G
1284.0937
960.3044
1.8
1.8
2.0
2.0
93.0
94.5
94.1
95.0
95.4
95.4
0.70
0.81
0.78
0.85
0.80
0.86
1.00
1.00
8453.3832 62 136
5087.1952 32 70
10041
10575
ELECTRICAL DATA
HP
Locked Break-
400
300
450
330
5008T
586/7T
1785
1190
988
1085
395
434
F
G
963.2547
1444.8820
2.0
1.5
2.7
2.1
95.0
93.0
95.6
94.1
95.6
95.4
0.80
0.70
0.86
0.78
0.88
0.80
1.00
1.00
3216.3085 22 48
8453.3832 34 75
7630
10672
500
370
586/7T
1790
1128
451
1067.2508
1.8
2.1
94.5
95.4
95.8
0.82
0.85
0.86
1.00
6104.6347 35 77
11059
The values shown are subject to change without prior notice. To obtain guaranteed values, please contact our nearest sales office.
39
Rated
Output
NEMA
Full
Locked
Full
Rated
Load
Rotor
Load
Speed
Current
Frame
ELECTRICAL DATA
HP
kW
1.0
0.75
1.5
1.1
2.0
1.5
3.0
2.2
5.0
3.7
7.5
5.5
10
7.5
15
11
20
15
25
18.5
30
22
40
30
50
37
60
45
75
55
100
75
125
90
150
110
200
150
250
185
300
220
350
260
400
300
450
330
500
370
40
Rotor
Allowable
Down
Efficiency
Power Factor
Cos
Service Moment
Factor
In
rpm
143T
145T
143T
145T
182T
145T
145T
184T
182T
182T
213T
184T
184T
215T
213T
213T
254T
215T
215T
256T
254T
254T
284T
256T
256T
286T
284TS
284T
324T
286TS
286T
326T
324TS
324T
364/5T
326TS
326T
364/5T
364/5TS
364/5T
404/5T
364/5TS
364/5T
404/5T
404/5TS
404/5T
444/5T
444/5TS
444/5T
444/5T
444/5TS
444/5T
447T
504/5T
447TS
504/5TS
447T
504/5T
447T
504/5T
447TS
504/5TS
447T
504/5T
586/7T
586/7TS
586/7T
586/7T
586/7TS
586/7T
586/7T
586/7T
586/7T
586/7T
586/7T
586/7T
Locked Break-
1765
1165
3495
1760
1165
3480
1755
1165
3500
1765
1170
3480
1745
1160
3510
1765
1170
3500
1765
1175
3520
1765
1180
3520
1765
1175
3520
1765
1175
3530
1770
1175
3550
1770
1175
3550
1770
1180
3560
1770
1180
3560
1775
1180
3560
1775
1185
3560
1780
1185
3570
1780
1185
1185
3570
3570
1780
1780
1185
1185
3570
3570
1780
1780
1190
3570
1790
1190
3570
1790
1190
1790
1190
1790
1190
1790
kVA
Tn
At 460V
Code
Lb.Ft
1.5
1.7
2.0
2.0
2.4
2.6
2.6
3.2
3.6
3.9
4.2
5.8
6.5
6.8
8.7
9.4
9.5
11.6
12.8
12.6
17.0
17.6
17.3
23.3
23.8
23.5
28.4
29.6
29.8
33.8
35.1
35.4
45.1
47.6
47.1
55.3
57.8
58.1
66.8
67.8
70.1
81.6
82.4
86.8
110.5
114.5
120.5
131.3
137.5
141.3
160.0
167.5
171.3
171.3
217.5
217.5
230.0
230.0
236.3
236.3
267.5
267.5
282.5
282.5
305.0
325.0
336.3
363.8
383.8
397.5
427.5
458.8
493.8
505.0
542.5
563.8
L
L
L
L
M
L
K
L
K
K
J
H
H
H
G
H
H
G
H
H
F
G
G
G
G
G
G
F
F
G
F
G
G
G
G
G
G
G
G
F
G
F
G
G
F
G
G
F
G
G
F
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
2.99
4.54
2.22
4.40
6.65
3.04
6.02
9.07
4.43
8.78
13.30
7.49
14.9
22.5
11.0
22.0
33.1
15.1
29.9
45.0
22.0
43.9
65.7
30.0
59.9
90.0
37.0
73.9
111
43.9
87.6
132
59.6
119
180
73.5
147
221
89.1
179
269
109
218
328
148
298
446
178
356
535
217
436
654
654
296
296
594
594
892
892
365
365
732
732
1096
434
866
1303
513
1024
1540
1181
1777
1299
1954
1457
Tl/Tn
2.8
2.3
3.0
2.6
3.2
3.5
2.4
3.0
2.5
2.3
2.2
2.4
2.1
1.9
2.2
2.0
2.3
2.0
2.0
2.3
2.0
2.5
2.3
2.0
2.5
2.3
2.2
2.3
2.2
2.4
2.5
2.3
2.2
2.3
2.3
2.1
2.3
2.5
2.0
2.1
2.5
2.0
2.3
2.5
2.0
2.1
2.3
2.0
2.0
2.1
2.0
2.2
2.2
2.2
2.2
2.2
2.3
2.3
2.4
2.4
2.0
2.0
2.1
2.1
1.8
1.1
1.8
1.8
1.0
1.8
1.8
1.8
1.8
1.8
1.5
1.8
Tb/Tn
3.9
3.0
4.0
3.7
4.0
4.0
3.2
3.0
4.0
3.2
2.5
3.5
3.0
2.1
3.0
2.6
3.1
2.6
2.6
2.9
2.7
2.5
2.5
2.5
2.5
2.5
2.8
2.2
2.4
3.0
2.3
2.5
2.2
2.3
2.3
2.1
2.3
2.7
2.5
2.2
2.7
2.1
2.4
2.6
2.6
2.2
2.6
2.5
2.2
2.3
2.5
2.3
2.2
2.2
2.6
2.6
2.4
2.4
2.4
2.4
2.5
2.5
2.3
2.3
2.1
2.0
2.1
2.1
2.0
2.1
2.0
2.0
2.0
2.0
2.1
2.1
% of full load
SF
50
75
100
50
75
100
75.5
75.5
75.5
80.0
81.5
80.0
81.5
84.0
80.0
85.5
86.5
85.5
85.5
86.5
86.5
87.5
88.5
88.5
88.5
88.5
89.5
89.5
89.5
89.5
89.5
90.2
90.2
91.0
89.5
90.2
91.0
90.2
90.2
91.7
92.4
91.0
92.4
92.4
91.0
92.4
93.0
91.0
93.0
93.0
91.7
93.6
93.0
92.4
93.6
93.6
92.4
94.1
94.5
94.5
93.6
93.6
94.1
94.1
94.5
94.5
93.6
93.6
94.5
94.5
93.0
94.1
94.5
93.0
94.1
94.5
93.0
94.5
93.0
94.5
93.0
94.5
80.0
80.0
81.5
82.5
84.0
82.5
84.0
86.5
82.5
87.5
87.5
86.5
87.5
87.5
88.5
89.5
89.5
89.5
90.2
89.5
90.2
91.0
90.2
90.2
91.0
91.0
91.0
92.4
91.7
91.0
92.4
91.7
91.7
93.0
93.0
92.4
93.6
93.0
92.4
93.6
93.6
93.0
94.1
93.6
93.6
94.5
94.1
94.1
94.5
94.1
94.1
95.0
95.0
95.0
94.5
94.5
95.0
95.0
95.0
95.0
95.4
95.4
95.0
95.0
94.1
95.0
95.0
94.1
95.0
95.0
94.1
95.0
94.1
95.0
94.1
95.4
82.5
80.0
82.5
84.0
85.5
84.0
84.0
86.5
85.5
87.5
87.5
87.5
87.5
87.5
88.5
89.5
89.5
89.5
90.2
89.5
90.2
91.0
91.0
90.2
91.0
91.0
91.0
92.4
91.7
91.0
92.4
91.7
91.7
93.0
93.0
92.4
93.6
93.0
93.0
93.6
93.6
93.0
94.1
93.6
93.6
94.5
94.1
94.5
94.5
94.1
94.5
95.0
95.0
95.0
95.0
95.0
95.0
95.0
95.0
95.0
95.4
95.4
95.4
95.4
95.0
95.4
95.4
95.0
95.4
95.4
95.4
95.4
95.4
95.4
95.4
95.8
0.60
0.48
0.69
0.65
0.47
0.70
0.68
0.48
0.80
0.65
0.60
0.85
0.68
0.65
0.80
0.66
0.62
0.86
0.69
0.67
0.86
0.74
0.79
0.86
0.76
0.80
0.86
0.77
0.72
0.87
0.76
0.70
0.87
0.76
0.76
0.88
0.77
0.74
0.80
0.83
0.74
0.80
0.83
0.72
0.81
0.80
0.67
0.84
0.81
0.74
0.84
0.81
0.74
0.74
0.85
0.85
0.80
0.80
0.73
0.73
0.88
0.88
0.81
0.81
0.68
0.87
0.81
0.69
0.87
0.81
0.70
0.81
0.70
0.81
0.70
0.82
0.73
0.60
0.78
0.76
0.58
0.81
0.79
0.60
0.87
0.75
0.70
0.90
0.78
0.75
0.88
0.77
0.74
0.90
0.79
0.78
0.89
0.82
0.85
0.90
0.84
0.86
0.90
0.84
0.81
0.90
0.83
0.80
0.90
0.83
0.83
0.90
0.83
0.82
0.87
0.87
0.83
0.88
0.87
0.81
0.89
0.86
0.77
0.90
0.85
0.80
0.90
0.86
0.82
0.82
0.90
0.90
0.84
0.84
0.80
0.80
0.90
0.90
0.85
0.85
0.76
0.88
0.85
0.76
0.88
0.85
0.77
0.85
0.78
0.85
0.78
0.85
0.79
0.69
0.84
0.82
0.68
0.86
0.85
0.68
0.90
0.81
0.76
0.91
0.82
0.78
0.90
0.82
0.81
0.91
0.82
0.83
0.90
0.86
0.88
0.90
0.87
0.88
0.90
0.85
0.85
0.90
0.85
0.85
0.91
0.85
0.86
0.91
0.86
0.86
0.91
0.89
0.86
0.91
0.89
0.85
0.91
0.87
0.83
0.91
0.87
0.85
0.91
0.87
0.85
0.85
0.91
0.91
0.86
0.86
0.84
0.84
0.91
0.91
0.86
0.86
0.80
0.89
0.86
0.80
0.89
0.86
0.80
0.86
0.80
0.86
0.80
0.86
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.15
1.00
1.00
Locked Approx.
of
Rotor
Inertia
Time
Wk
Hot/Cold
Lb.Ft
(s)
0.09312
0.13303
0.04312
0.11972
0.48798
0.04886
0.13303
0.62109
0.15443
0.31782
1.01192
0.19988
0.38136
1.47188
0.42144
1.01192
2.386
0.66546
1.3799
2.89729
1.25653
2.1436
7.19918
1.53576
2.38178
8.18089
2.89729
3.83133
10.2163
3.57901
4.68274
11.919
4.89559
7.85366
23.4554
5.32131
9.1626
29.0401
8.51359
17.4383
34.6247
9.79062
19.9295
36.8586
11.919
27.4031
73.6255
27.9231
45.7302
87.2598
33.5078
57.1628
103.621
103.621
44.677
44.677
70.5008
70.5008
125.436
125.436
51.3786
51.3786
89.555
89.555
226.1775
122.7091
176.9459
277.0674
136.3435
185.7932
327.9573
199.0641
367.5384
221.1824
367.5384
265.4189
16
22
18
12
36
13
12
35
23
31
59
28
21
49
25
21
29
19
19
24
33
26
21
21
18
31
23
51
56
60
47
35
46
28
35
33
25
39
61
23
32
46
22
26
38
18
49
72
37
40
75
33
40
40
74
74
23
23
32
32
34
34
22
22
74
34
56
75
35
38
73
34
62
32
34
35
35
48
40
26
79
29
26
77
51
68
130
62
46
108
55
46
64
42
42
53
73
57
46
46
40
68
51
112
123
132
103
77
101
62
77
73
55
86
134
51
70
101
48
57
84
40
108
158
81
88
165
73
88
88
163
163
51
51
70
70
75
75
48
48
163
75
123
165
77
84
161
75
136
70
75
77
Weight
Lb
44
44
42
51
68
44
53
79
90
88
110
105
93
162
121
137
236
160
152
278
254
240
306
287
273
430
313
351
527
388
397
580
516
542
882
549
595
882
807
853
1067
915
900
1136
1206
1118
1544
1625
1471
1874
1689
1665
1969
1969
1874
1874
1996
1996
2269
2269
2068
2068
2315
2315
3605
2977
3440
4090
3208
3903
4322
4289
4564
4807
4851
5027
Installation
Connection methods
a) Slow braking
Applications
D - Bridge Rectifier
R - Varistors
Brake operation
L - Electromagnetic Coil
When the motor is disconnected from the supply, the
K - Contactor
coil of the electromagnet is de-energized. This allows
pressure to be exerted by the springs to push the
note: Normally WEG brake motors are supplied from
armature towards the motor and thus cause the
the factory connected this way.
braking pads to be compressed between the
armature and the motor endshield.
The brake linings are pressed between the friction b) Medium speed braking
surfaces of the armature and the endshield, braking In this case a contact is used to interrupt the A.C.
the motor until it comes to a stop. In a new start, the circuit supplying the bridge rectifier. It is essential that
electromagnet coil is energized which, after this be a N.O. auxiliary contact, of the same contactor
overcoming the resistance of the springs, allows the controlling the motor to ensure a simultaneous
armature to be drawn against the electromagnet switching on and off of the motor brake.
63
ADDITIONAL INFORMATION
D - Bridge Rectifier
R - Varistors
L - Electromagnetic Coil
K - Contactor
S - Auxiliary N.O. Contact
c) Rapid braking
D - Bridge Rectifier
R - Varistors
L - Electromagnetic Coil
K - Contactor
S - Auxiliary N.O. contact
S - Switch to electrically release the brake
Braking torque
ADDITIONAL INFORMATION
D - Bridge Rectifier
R - Varistors
L - Electromagnetic Coil
K - Contactor
S - Auxiliary N.O. (normally open) contact
Important
The springs must be removed in such a way that the
remaining springs are symmetrically spaced apart, thus
avoiding any friction which could occur due to uneven
wear of the linings.
Braking torque:
Braking
torque
(Ft.Lb)
Number
of
springs
140
180
Frame
II
IV
VI
VIII
II
IV
VI
VIII
200
400
600
75
300
675
17
100
200
300
400
50
170
380
680
210
44
12
50
100
150
200
35
140
300
560
250
98
30
60
100
120
25
100
200
400
Brake maintenance
Hazardous Environments
Whenever the ambient air contains, or may contain,
flammable or explosive elements, standards require
specially constructed motors for these applications.
This does not refer to degree of protection, because
special requirements are not intented to protect the
motor, but to protect installations against possible
accidents caused by the motor.
Hazardous ambient
Group A - Acetylene
Group B - Hydrogen Butadiene
Group C - Ethylic Ether, Ethylene
Group D - Gasoline, Naphtha, Solvents in
general
65
ADDITIONAL INFORMATION
Risk areas
For direct drives the shafts must be carefully aligned using flexible couplings,
wherever possible.
Axial Thrusts
Pole
II
143T
145T
182 T
184 T
ADDITIONAL INFORMATION
213 T
215 T
254 T
256 T
66
Ball bearings
Roller bearings
20,000 Hs
40,000 Hs
20,000 Hs
40,000 Hs
123
95
Frame
Pole
II
Vertical mounting
Lbf
Lbf
115
110
IV
154
119
IV
159
152
VI
179
138
VI
185
176
VIII
208
160
VIII
220
212
II
115
110
IV
154
146
II
126
97
IV
154
119
143T
Horizontal mounting
145T
VI
179
138
VI
185
176
VIII
208
160
VIII
220
212
II
298
229
II
273
260
IV
306
289
IV
375
359
VI
306
306
182 T
VI
448
432
VIII
306
306
VIII
503
485
II
304
234
II
271
258
IV
304
293
IV
370
353
184 T
VI
306
306
VI
445
425
VIII
306
306
VIII
503
485
II
373
287
II
331
311
IV
459
362
IV
456
430
VI
461
419
213 T
VI
551
527
VIII
461
456
VIII
613
582
II
381
293
II
326
304
IV
456
370
IV
452
421
215 T
VI
459
432
VI
549
522
VIII
461
461
VIII
608
573
II
467
359
1025
959
II
467
421
IV
595
458
1025
1025
IV
622
571
VI
595
584
1025
1025
254 T
VI
820
761
VIII
584
584
1025
1025
VIII
730
677
II
463
410
IV
615
553
II
474
364
1027
992
IV
584
465
1025
1025
VI
582
534
1027
1027
VI
721
655
VIII
582
582
1027
1027
VIII
813
747
256 T
Radial Thrusts
Axial Thrusts
Ball bearings
Roller bearings
Frame
Pole
20,000 Hs
40,000 Hs
20,000 Hs
40,000 Hs
284 TS
II
683
525
1239
1239
IV
736
847
1307
1307
VI
739
701
1307
1307
VIII
741
741
1310
1310
II
688
530
1237
1237
IV
730
635
1305
1305
VI
730
708
1305
1305
VIII
730
730
1305
1305
II
776
598
1614
1574
IV
926
713
1744
1744
VI
1012
818
1744
1744
VIII
1010
908
1744
1744
II
769
592
1609
1585
IV
926
713
1737
1737
VI
1005
825
1739
1739
VIII
999
919
1737
1737
II
1014
781
IV
1182
910
2152
2152
VI
1254
1045
2152
2152
VIII
1254
1164
2152
2152
II
985
758
IV
1151
886
2141
2141
VI
1237
1027
2141
2141
VIII
1230
1146
2138
2138
II
955
735
IV
1338
1030
2892
2892
VI
1554
1197
2889
2889
VIII
1689
1367
2892
2892
II
955
735
IV
1338
1030
2892
2892
VI
1532
1180
2888
2888
VIII
1669
1316
2884
2884
II
930
716
IV
1706
1314
3763
3763
VI
1925
1482
3812
3812
VIII
2154
1659
3812
3812
II
893
688
IV
1625
1251
3812
3812
VI
1881
1448
3794
3794
VIII
2112
1626
3787
3787
II
750
578
IV
1497
1153
3754
3754
VI
1724
1327
3715
3715
VIII
1966
1514
3715
3715
284 T
286 TS
286 T
324 TS
324 T
326 TS
326 T
364 TS
364 T
365 TS
365 T
404 TS
404 T
405 TS
405 T
444 TS
444 T
445 TS
445 T
447 TS
447 T
Horizontal mounting
Vertical mounting
Frame
Pole
Lbf
Lbf
284 TS
II
635
573
IV
840
769
VI
972
871
VIII
1102
1008
284 T
286 TS
286 T
324 TS
324 T
326 TS
326 T
364 TS
364 T
365 TS
365 T
404 TS
404 T
405 TS
405 T
444 TS
444 T
445 TS
445 T
447 TS
447 T
II
628
558
IV
836
756
VI
968
855
VIII
428
981
II
716
628
IV
950
844
VI
1113
992
VIII
1254
1133
II
708
606
IV
941
818
VI
1107
977
VIII
1248
1118
II
908
783
IV
1199
1036
VI
1407
1224
VIII
1583
1402
750
II
893
IV
1186
999
VI
1393
1190
VIII
1570
1367
II
875
703
IV
1164
937
VI
1373
1129
VIII
1570
1327
703
II
875
IV
1164
937
VI
1360
1096
VIII
1534
1270
II
858
613
IV
1396
1120
VI
1612
1261
VIII
1821
1488
569
II
842
IV
1340
994
VI
1590
1193
VIII
1797
1420
II
769
355
IV
1250
721
VI
1481
844
VIII
1689
1087
ADDITIONAL INFORMATION
67
Radial Thrusts
Axial Thrusts
449 T
504 TS
504 T
505 TS
505 T
586/7 TS
586/7 T
5008 TS
5008 T
Pole
Ball bearings
20,000 Hs
40,000 Hs
Roller bearings
20,000 Hs
40,000 Hs
II
736
567
IV
1850
1603
2597
2597
VI
1799
1799
3452
3452
VIII
1746
1746
3355
3355
II
853
657
IV
1464
1127
4142
3946
VI
1656
1275
4041
4041
VIII
1810
1394
4030
4030
II
849
654
IV
1420
1093
4030
3825
VI
1636
1260
4008
4008
VIII
1865
1436
4008
4008
II
569
438
IV
1874
1508
3710
3710
VI
1550
1550
3470
3470
VIII
1656
1656
3527
3527
II
802
557
IV
1850
1350
3720
3720
VI
1800
1428
3580
3580
VIII
1800
1630
3720
3720
Frame
Pole
449 TS
II
449 T
504 TS
504 T
505 TS
505 T
586/7 TS
586/7 T
5008 TS
5008 T
Horizontal mounting
Vertical mounting
Lbf
Lbf
754
344
IV
1504
855
VI
1810
1133
VIII
2057
1351
II
939
527
IV
1334
913
VI
1559
1085
VIII
1733
1217
II
939
527
IV
1250
721
VI
1484
847
VIII
1689
1087
II
677
IV
1387
366
692
VI
1700
VIII
1947
922
II
792
729
IV
1627
1551
VI
1912
1811
VIII
2141
2033
ADDITIONAL INFORMATION
F-1
F-2
FLOOR MOUNTING
C-1 or C-2
CEILING MOUNTINGS
68
W-6 or W-7
W-5 or W-8
Multiply
Times
Result
Force
Newton (N)
Kilogram-force (kgf)
0.1019
2.205
Kilogram-force (kgf)
Pound-force (lb)
Length
Meter (m)
Inch (in.)
39.37
0.0833
Inches (in.)
Feet (ft)
Area
1550
6.94x10-3
Torque
Meter-Newton (mN)
Meter-kilogram-force (mkgf)
Foot-pound-force (ft.lb)
0.1019
7.233
16
Meter-kilogram-force (mkgf)
Foot-pound-force (ft.lb)
Ounce-foot (oz.ft)
Pressure
1.019x10-5
14.22
0.06807
1.0132
1.02
Power
Kilowatt (kW)
Horsepower (HP)
1.358
75
Horsepower (HP)
Kilogram-force-meter per second (kgfm/s)
Energy
0.102
2.73x10-6
2.66x10+6
0.3238
Kilogram-force-meter (kgfm)
Kilowatt-hour (kWh)
Foot-pound-force (ft.lb)
Calory (cal)
Inertia
Kilogram-square-meter (kgm)
Square foot pound (sq.ft.lb)
23.73
144
WEG Warranty
WEG will repair or replace, at its option, any motor which has been found to be defective and is within the
warranty period, provided that the motor is shipped with previous authorization, freight prepaid, to the
authorized service station. All return shipments are made F.O.B. the Service Station. WEG is not responsible
for removal, installation, or any other incidental expenses incurred in shipping the motor to or from the
company.
Liability under this warranty shall be solely limited to repair or replacement of the motor within the warranty
period and shall not be liable under any circumstances for consequential or incidental damages, including
but not limited to personal injury or labour costs. Under no circumstances will WEG be responsible for any
expense in connection with any repairs made by authorized service station, unless such repairs have been
specifically authorized in writing.
ADDITIONAL INFORMATION
WEG guarantees its motors from defects of workmanship and materials when operated under normal
conditions and in accordance with nameplate characteristic units. This warranty shall be in effect for a
period of twenty four months from date of installation, but shall be in no event, be in effect for more than
thirty months from date of manufacture. This warranty shall be in lieu of any other warranty express or
implied, including, but not limited to any implied warranty of merchantability of fitness for a particular
purpose.